summaryrefslogtreecommitdiffstats
path: root/doc/guides/nics/mvpp2.rst
diff options
context:
space:
mode:
authorLuca Boccassi <luca.boccassi@gmail.com>2018-11-01 11:59:50 +0000
committerLuca Boccassi <luca.boccassi@gmail.com>2018-11-01 12:00:19 +0000
commit8d01b9cd70a67cdafd5b965a70420c3bd7fb3f82 (patch)
tree208e3bc33c220854d89d010e3abf720a2e62e546 /doc/guides/nics/mvpp2.rst
parentb63264c8342e6a1b6971c79550d2af2024b6a4de (diff)
New upstream version 18.11-rc1upstream/18.11-rc1
Change-Id: Iaa71986dd6332e878d8f4bf493101b2bbc6313bb Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
Diffstat (limited to 'doc/guides/nics/mvpp2.rst')
-rw-r--r--doc/guides/nics/mvpp2.rst433
1 files changed, 361 insertions, 72 deletions
diff --git a/doc/guides/nics/mvpp2.rst b/doc/guides/nics/mvpp2.rst
index 0408752c..82b9383e 100644
--- a/doc/guides/nics/mvpp2.rst
+++ b/doc/guides/nics/mvpp2.rst
@@ -56,7 +56,7 @@ Features of the MVPP2 PMD are:
- Speed capabilities
- Link status
-- Queue start/stop
+- Tx Queue start/stop
- MTU update
- Jumbo frame
- Promiscuous mode
@@ -70,11 +70,13 @@ Features of the MVPP2 PMD are:
- L4 checksum offload
- Packet type parsing
- Basic stats
-- Extended stats
-- QoS
+- :ref:`Extended stats <extstats>`
- RX flow control
-- TX queue start/stop
-
+- Scattered TX frames
+- :ref:`QoS <qossupport>`
+- :ref:`Flow API <flowapi>`
+- :ref:`Traffic metering and policing <mtrapi>`
+- :ref:`Traffic Management API <tmapi>`
Limitations
-----------
@@ -88,6 +90,20 @@ Limitations
functionality. Current workaround is to reset board so that PPv2 has a
chance to start in a sane state.
+- MUSDK architecture does not support changing configuration in run time.
+ All nessesary configurations should be done before first dev_start().
+
+- RX queue start/stop is not supported.
+
+- Current implementation does not support replacement of buffers in the HW buffer pool
+ at run time, so it is responsibility of the application to ensure that MTU does not exceed the configured buffer size.
+
+- Configuring TX flow control currently is not supported.
+
+- In current implementation, mechanism for acknowledging transmitted packets (``tx_done_cleanup``) is not supported.
+
+- Running more than one DPDK-MUSDK application simultaneously is not supported.
+
Prerequisites
-------------
@@ -96,19 +112,19 @@ Prerequisites
.. code-block:: console
- git clone https://github.com/MarvellEmbeddedProcessors/linux-marvell.git -b linux-4.4.52-armada-17.10
+ git clone https://github.com/MarvellEmbeddedProcessors/linux-marvell.git -b linux-4.4.120-armada-18.09
- Out of tree `mvpp2x_sysfs` kernel module sources
.. code-block:: console
- git clone https://github.com/MarvellEmbeddedProcessors/mvpp2x-marvell.git -b mvpp2x-armada-17.10
+ git clone https://github.com/MarvellEmbeddedProcessors/mvpp2x-marvell.git -b mvpp2x-armada-18.09
- MUSDK (Marvell User-Space SDK) sources
.. code-block:: console
- git clone https://github.com/MarvellEmbeddedProcessors/musdk-marvell.git -b musdk-armada-17.10
+ git clone https://github.com/MarvellEmbeddedProcessors/musdk-marvell.git -b musdk-armada-18.09
MUSDK is a light-weight library that provides direct access to Marvell's
PPv2 (Packet Processor v2). Alternatively prebuilt MUSDK library can be
@@ -119,12 +135,6 @@ Prerequisites
To get better understanding of the library one can consult documentation
available in the ``doc`` top level directory of the MUSDK sources.
- MUSDK must be configured with the following features:
-
- .. code-block:: console
-
- --enable-bpool-dma=64
-
- DPDK environment
Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup
@@ -140,6 +150,95 @@ The following options can be modified in the ``config`` file.
Toggle compilation of the librte mvpp2 driver.
+ .. Note::
+
+ When MVPP2 PMD is enabled ``CONFIG_RTE_LIBRTE_MVNETA_PMD`` must be disabled
+
+
+Building DPDK
+-------------
+
+Driver needs precompiled MUSDK library during compilation.
+
+.. code-block:: console
+
+ export CROSS_COMPILE=<toolchain>/bin/aarch64-linux-gnu-
+ ./bootstrap
+ ./configure --host=aarch64-linux-gnu
+ make install
+
+MUSDK will be installed to `usr/local` under current directory.
+For the detailed build instructions please consult ``doc/musdk_get_started.txt``.
+
+Before the DPDK build process the environmental variable ``LIBMUSDK_PATH`` with
+the path to the MUSDK installation directory needs to be exported.
+
+For additional instructions regarding DPDK cross compilation please refer to :doc:`Cross compile DPDK for ARM64 <../linux_gsg/cross_build_dpdk_for_arm64>`.
+
+.. code-block:: console
+
+ export LIBMUSDK_PATH=<musdk>/usr/local
+ export CROSS=<toolchain>/bin/aarch64-linux-gnu-
+ export RTE_KERNELDIR=<kernel-dir>
+ export RTE_TARGET=arm64-armv8a-linuxapp-gcc
+
+ make config T=arm64-armv8a-linuxapp-gcc
+ sed -i "s/MVNETA_PMD=y/MVNETA_PMD=n/" build/.config
+ sed -i "s/MVPP2_PMD=n/MVPP2_PMD=y/" build/.config
+ make
+
+Usage Example
+-------------
+
+MVPP2 PMD requires extra out of tree kernel modules to function properly.
+`musdk_cma` sources are part of the MUSDK. Please consult
+``doc/musdk_get_started.txt`` for the detailed build instructions.
+For `mvpp2x_sysfs` please consult ``Documentation/pp22_sysfs.txt`` for the
+detailed build instructions.
+
+.. code-block:: console
+
+ insmod musdk_cma.ko
+ insmod mvpp2x_sysfs.ko
+
+Additionally interfaces used by DPDK application need to be put up:
+
+.. code-block:: console
+
+ ip link set eth0 up
+ ip link set eth2 up
+
+In order to run testpmd example application following command can be used:
+
+.. code-block:: console
+
+ ./testpmd --vdev=eth_mvpp2,iface=eth0,iface=eth2 -c 7 -- \
+ --burst=128 --txd=2048 --rxd=1024 --rxq=2 --txq=2 --nb-cores=2 \
+ -i -a --rss-udp
+
+.. _extstats:
+
+Extended stats
+--------------
+
+MVPP2 PMD supports the following extended statistics:
+
+ - ``rx_bytes``: number of RX bytes
+ - ``rx_packets``: number of RX packets
+ - ``rx_unicast_packets``: number of RX unicast packets
+ - ``rx_errors``: number of RX MAC errors
+ - ``rx_fullq_dropped``: number of RX packets dropped due to full RX queue
+ - ``rx_bm_dropped``: number of RX packets dropped due to no available buffers in the HW pool
+ - ``rx_early_dropped``: number of RX packets that were early dropped
+ - ``rx_fifo_dropped``: number of RX packets dropped due to RX fifo overrun
+ - ``rx_cls_dropped``: number of RX packets dropped by classifier
+ - ``tx_bytes``: number of TX bytes
+ - ``tx_packets``: number of TX packets
+ - ``tx_unicast_packets``: number of TX unicast packets
+ - ``tx_errors``: number of TX MAC errors
+
+
+.. _qossupport:
QoS Configuration
-----------------
@@ -152,20 +251,23 @@ Configuration syntax
.. code-block:: console
- [port <portnum> default]
- default_tc = <default_tc>
- mapping_priority = <mapping_priority>
- policer_enable = <policer_enable>
+ [policer <policer_id>]
token_unit = <token_unit>
color = <color_mode>
cir = <cir>
ebs = <ebs>
cbs = <cbs>
+ [port <portnum> default]
+ default_tc = <default_tc>
+ mapping_priority = <mapping_priority>
+
rate_limit_enable = <rate_limit_enable>
rate_limit = <rate_limit>
burst_size = <burst_size>
+ default_policer = <policer_id>
+
[port <portnum> tc <traffic_class>]
rxq = <rx_queue_list>
pcp = <pcp_list>
@@ -201,7 +303,9 @@ Where:
- ``<dscp_list>``: List of DSCP values to handle in particular TC (e.g. 0-12 32-48 63).
-- ``<policer_enable>``: Enable ingress policer.
+- ``<default_policer>``: Id of the policer configuration section to be used as default.
+
+- ``<policer_id>``: Id of the policer configuration section (0..31).
- ``<token_unit>``: Policer token unit (`bytes` or `packets`).
@@ -215,7 +319,7 @@ Where:
- ``<default_color>``: Default color for specific tc.
-- ``<rate_limit_enable>``: Enables per port or per txq rate limiting.
+- ``<rate_limit_enable>``: Enables per port or per txq rate limiting (`0`/`1` to disable/enable).
- ``<rate_limit>``: Committed information rate, in kilo bits per second.
@@ -234,6 +338,13 @@ Configuration file example
.. code-block:: console
+ [policer 0]
+ token_unit = bytes
+ color = blind
+ cir = 100000
+ ebs = 64
+ cbs = 64
+
[port 0 default]
default_tc = 0
mapping_priority = ip
@@ -265,12 +376,7 @@ Configuration file example
default_tc = 0
mapping_priority = vlan/ip
- policer_enable = 1
- token_unit = bytes
- color = blind
- cir = 100000
- ebs = 64
- cbs = 64
+ default_policer = 0
[port 1 tc 0]
rxq = 0
@@ -297,38 +403,14 @@ Usage example
./testpmd --vdev=eth_mvpp2,iface=eth0,iface=eth2,cfg=/home/user/mrvl.conf \
-c 7 -- -i -a --disable-hw-vlan-strip --rxq=3 --txq=3
-
-Building DPDK
--------------
-
-Driver needs precompiled MUSDK library during compilation.
-
-.. code-block:: console
-
- export CROSS_COMPILE=<toolchain>/bin/aarch64-linux-gnu-
- ./bootstrap
- ./configure --host=aarch64-linux-gnu --enable-bpool-dma=64
- make install
-
-MUSDK will be installed to `usr/local` under current directory.
-For the detailed build instructions please consult ``doc/musdk_get_started.txt``.
-
-Before the DPDK build process the environmental variable ``LIBMUSDK_PATH`` with
-the path to the MUSDK installation directory needs to be exported.
-
-.. code-block:: console
-
- export LIBMUSDK_PATH=<musdk>/usr/local
- export CROSS=aarch64-linux-gnu-
- make config T=arm64-armv8a-linuxapp-gcc
- sed -ri 's,(MVPP2_PMD=)n,\1y,' build/.config
- make
+.. _flowapi:
Flow API
--------
PPv2 offers packet classification capabilities via classifier engine which
can be configured via generic flow API offered by DPDK.
+For an additional description please refer to DPDK :ref:`Generic flow API <Generic_flow_API>`.
Supported flow actions
~~~~~~~~~~~~~~~~~~~~~~
@@ -489,32 +571,239 @@ Following limitations need to be taken into account while creating flow rules:
For additional information about classifier please consult
``doc/musdk_cls_user_guide.txt``.
-Usage Example
--------------
+.. _mtrapi:
-MVPP2 PMD requires extra out of tree kernel modules to function properly.
-`musdk_uio` and `mv_pp_uio` sources are part of the MUSDK. Please consult
-``doc/musdk_get_started.txt`` for the detailed build instructions.
-For `mvpp2x_sysfs` please consult ``Documentation/pp22_sysfs.txt`` for the
-detailed build instructions.
+Traffic metering and policing
+-----------------------------
-.. code-block:: console
+MVPP2 PMD supports DPDK traffic metering and policing that allows the following:
- insmod musdk_uio.ko
- insmod mv_pp_uio.ko
- insmod mvpp2x_sysfs.ko
+1. Meter ingress traffic.
+2. Do policing.
+3. Gather statistics.
-Additionally interfaces used by DPDK application need to be put up:
+For an additional description please refer to DPDK :doc:`Traffic Metering and Policing API <../prog_guide/traffic_metering_and_policing>`.
-.. code-block:: console
+The policer objects defined by this feature can work with the default policer defined via config file as described in :ref:`QoS Support <qossupport>`.
- ip link set eth0 up
- ip link set eth2 up
+Limitations
+~~~~~~~~~~~
-In order to run testpmd example application following command can be used:
+The following capabilities are not supported:
-.. code-block:: console
+- MTR object meter DSCP table update
+- MTR object policer action update
+- MTR object enabled statistics
- ./testpmd --vdev=eth_mvpp2,iface=eth0,iface=eth2 -c 7 -- \
- --burst=128 --txd=2048 --rxd=1024 --rxq=2 --txq=2 --nb-cores=2 \
- -i -a --rss-udp
+Usage example
+~~~~~~~~~~~~~
+
+1. Run testpmd user app:
+
+ .. code-block:: console
+
+ ./testpmd --vdev=eth_mvpp2,iface=eth0,iface=eth2 -c 6 -- -i -p 3 -a --txd 1024 --rxd 1024
+
+2. Create meter profile:
+
+ .. code-block:: console
+
+ testpmd> add port meter profile 0 0 srtcm_rfc2697 2000 256 256
+
+3. Create meter:
+
+ .. code-block:: console
+
+ testpmd> create port meter 0 0 0 yes d d d 0 1 0
+
+4. Create flow rule witch meter attached:
+
+ .. code-block:: console
+
+ testpmd> flow create 0 ingress pattern ipv4 src is 10.10.10.1 / end actions meter mtr_id 0 / end
+
+For a detailed usage description please refer to "Traffic Metering and Policing" section in DPDK :doc:`Testpmd Runtime Functions <../testpmd_app_ug/testpmd_funcs>`.
+
+
+
+.. _tmapi:
+
+Traffic Management API
+----------------------
+
+MVPP2 PMD supports generic DPDK Traffic Management API which allows to
+configure the following features:
+
+1. Hierarchical scheduling
+2. Traffic shaping
+3. Congestion management
+4. Packet marking
+
+Internally TM is represented by a hierarchy (tree) of nodes.
+Node which has a parent is called a leaf whereas node without
+parent is called a non-leaf (root).
+MVPP2 PMD supports two level hierarchy where level 0 represents ports and level 1 represents tx queues of a given port.
+
+.. figure:: img/mvpp2_tm.svg
+
+Nodes hold following types of settings:
+
+- for egress scheduler configuration: weight
+- for egress rate limiter: private shaper
+- bitmask indicating which statistics counters will be read
+
+Hierarchy is always constructed from the top, i.e first a root node is added
+then some number of leaf nodes. Number of leaf nodes cannot exceed number
+of configured tx queues.
+
+After hierarchy is complete it can be committed.
+
+
+For an additional description please refer to DPDK :doc:`Traffic Management API <../prog_guide/traffic_management>`.
+
+Limitations
+~~~~~~~~~~~
+
+The following capabilities are not supported:
+
+- Traffic manager WRED profile and WRED context
+- Traffic manager shared shaper update
+- Traffic manager packet marking
+- Maximum number of levels in hierarchy is 2
+- Currently dynamic change of a hierarchy is not supported
+
+Usage example
+~~~~~~~~~~~~~
+
+For a detailed usage description please refer to "Traffic Management" section in DPDK :doc:`Testpmd Runtime Functions <../testpmd_app_ug/testpmd_funcs>`.
+
+1. Run testpmd as follows:
+
+ .. code-block:: console
+
+ ./testpmd --vdev=net_mrvl,iface=eth0,iface=eth2,cfg=./qos_config -c 7 -- \
+ -i -p 3 --disable-hw-vlan-strip --rxq 3 --txq 3 --txd 1024 --rxd 1024
+
+2. Stop all ports:
+
+ .. code-block:: console
+
+ testpmd> port stop all
+
+3. Add shaper profile:
+
+ .. code-block:: console
+
+ testpmd> add port tm node shaper profile 0 0 900000 70000 0
+
+ Parameters have following meaning::
+
+ 0 - Id of a port.
+ 0 - Id of a new shaper profile.
+ 900000 - Shaper rate in bytes/s.
+ 70000 - Bucket size in bytes.
+ 0 - Packet length adjustment - ignored.
+
+4. Add non-leaf node for port 0:
+
+ .. code-block:: console
+
+ testpmd> add port tm nonleaf node 0 3 -1 0 0 0 0 0 1 3 0
+
+ Parameters have following meaning::
+
+ 0 - Id of a port
+ 3 - Id of a new node.
+ -1 - Indicate that root does not have a parent.
+ 0 - Priority of the node.
+ 0 - Weight of the node.
+ 0 - Id of a level. Since this is a root 0 is passed.
+ 0 - Id of the shaper profile.
+ 0 - Number of SP priorities.
+ 3 - Enable statistics for both number of transmitted packets and bytes.
+ 0 - Number of shared shapers.
+
+5. Add leaf node for tx queue 0:
+
+ .. code-block:: console
+
+ testpmd> add port tm leaf node 0 0 3 0 30 1 -1 0 0 1 0
+
+ Parameters have following meaning::
+
+ 0 - Id of a port.
+ 0 - Id of a new node.
+ 3 - Id of the parent node.
+ 0 - Priority of a node.
+ 30 - WRR weight.
+ 1 - Id of a level. Since this is a leaf node 1 is passed.
+ -1 - Id of a shaper. -1 indicates that shaper is not attached.
+ 0 - Congestion management is not supported.
+ 0 - Congestion management is not supported.
+ 1 - Enable statistics counter for number of transmitted packets.
+ 0 - Number of shared shapers.
+
+6. Add leaf node for tx queue 1:
+
+ .. code-block:: console
+
+ testpmd> add port tm leaf node 0 1 3 0 60 1 -1 0 0 1 0
+
+ Parameters have following meaning::
+
+ 0 - Id of a port.
+ 1 - Id of a new node.
+ 3 - Id of the parent node.
+ 0 - Priority of a node.
+ 60 - WRR weight.
+ 1 - Id of a level. Since this is a leaf node 1 is passed.
+ -1 - Id of a shaper. -1 indicates that shaper is not attached.
+ 0 - Congestion management is not supported.
+ 0 - Congestion management is not supported.
+ 1 - Enable statistics counter for number of transmitted packets.
+ 0 - Number of shared shapers.
+
+7. Add leaf node for tx queue 2:
+
+ .. code-block:: console
+
+ testpmd> add port tm leaf node 0 2 3 0 99 1 -1 0 0 1 0
+
+ Parameters have following meaning::
+
+ 0 - Id of a port.
+ 2 - Id of a new node.
+ 3 - Id of the parent node.
+ 0 - Priority of a node.
+ 99 - WRR weight.
+ 1 - Id of a level. Since this is a leaf node 1 is passed.
+ -1 - Id of a shaper. -1 indicates that shaper is not attached.
+ 0 - Congestion management is not supported.
+ 0 - Congestion management is not supported.
+ 1 - Enable statistics counter for number of transmitted packets.
+ 0 - Number of shared shapers.
+
+8. Commit hierarchy:
+
+ .. code-block:: console
+
+ testpmd> port tm hierarchy commit 0 no
+
+ Parameters have following meaning::
+
+ 0 - Id of a port.
+ no - Do not flush TM hierarchy if commit fails.
+
+9. Start all ports
+
+ .. code-block:: console
+
+ testpmd> port start all
+
+
+
+10. Enable forwarding
+
+ .. code-block:: console
+
+ testpmd> start