aboutsummaryrefslogtreecommitdiffstats
path: root/doc/guides/nics
diff options
context:
space:
mode:
authorLuca Boccassi <luca.boccassi@gmail.com>2017-11-08 14:15:11 +0000
committerLuca Boccassi <luca.boccassi@gmail.com>2017-11-08 14:45:54 +0000
commit055c52583a2794da8ba1e85a48cce3832372b12f (patch)
tree8ceb1cb78fbb46a0f341f8ee24feb3c6b5540013 /doc/guides/nics
parentf239aed5e674965691846e8ce3f187dd47523689 (diff)
New upstream version 17.11-rc3
Change-Id: I6a5baa40612fe0c20f30b5fa773a6cbbac63a685 Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
Diffstat (limited to 'doc/guides/nics')
-rw-r--r--doc/guides/nics/ark.rst3
-rw-r--r--doc/guides/nics/dpaa.rst378
-rw-r--r--doc/guides/nics/dpaa2.rst8
-rw-r--r--doc/guides/nics/fail_safe.rst4
-rw-r--r--doc/guides/nics/features.rst78
-rw-r--r--doc/guides/nics/features/bnxt.ini17
-rw-r--r--doc/guides/nics/features/default.ini2
-rw-r--r--doc/guides/nics/features/dpaa.ini24
-rw-r--r--doc/guides/nics/features/dpaa2.ini2
-rw-r--r--doc/guides/nics/features/enic.ini1
-rw-r--r--doc/guides/nics/features/fm10k_vec.ini35
-rw-r--r--doc/guides/nics/features/liquidio.ini2
-rw-r--r--doc/guides/nics/features/mlx4.ini1
-rw-r--r--doc/guides/nics/features/mlx5.ini2
-rw-r--r--doc/guides/nics/features/mrvl.ini23
-rw-r--r--doc/guides/nics/features/nfp_pf.ini (renamed from doc/guides/nics/features/nfp.ini)1
-rw-r--r--doc/guides/nics/features/nfp_vf.ini (renamed from doc/guides/nics/features/fm10k_vf_vec.ini)17
-rw-r--r--doc/guides/nics/features/octeontx.ini19
-rw-r--r--doc/guides/nics/features/sfc_efx.ini2
-rw-r--r--doc/guides/nics/features/thunderx.ini1
-rw-r--r--doc/guides/nics/features/xenvirt.ini6
-rw-r--r--doc/guides/nics/fm10k.rst11
-rw-r--r--doc/guides/nics/i40e.rst30
-rw-r--r--doc/guides/nics/index.rst3
-rw-r--r--doc/guides/nics/ixgbe.rst11
-rw-r--r--doc/guides/nics/liquidio.rst10
-rw-r--r--doc/guides/nics/mlx4.rst37
-rw-r--r--doc/guides/nics/mlx5.rst74
-rw-r--r--doc/guides/nics/mrvl.rst253
-rw-r--r--doc/guides/nics/nfp.rst78
-rw-r--r--doc/guides/nics/octeontx.rst252
-rw-r--r--doc/guides/nics/sfc_efx.rst8
-rw-r--r--doc/guides/nics/tap.rst9
-rw-r--r--doc/guides/nics/vhost.rst5
-rw-r--r--doc/guides/nics/virtio.rst7
35 files changed, 1250 insertions, 164 deletions
diff --git a/doc/guides/nics/ark.rst b/doc/guides/nics/ark.rst
index a7c2590b..6c135eeb 100644
--- a/doc/guides/nics/ark.rst
+++ b/doc/guides/nics/ark.rst
@@ -146,9 +146,6 @@ Data Path Interface
Ingress RX and Egress TX operation is by the nominal DPDK API .
The driver supports single-port, multi-queue for both RX and TX.
-Refer to ``ark_ethdev.h`` for the list of supported methods to
-act upon RX and TX Queues.
-
Configuration Information
-------------------------
diff --git a/doc/guides/nics/dpaa.rst b/doc/guides/nics/dpaa.rst
new file mode 100644
index 00000000..d331c053
--- /dev/null
+++ b/doc/guides/nics/dpaa.rst
@@ -0,0 +1,378 @@
+.. BSD LICENSE
+ Copyright 2017 NXP.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+ * Neither the name of NXP nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+DPAA Poll Mode Driver
+=====================
+
+The DPAA NIC PMD (**librte_pmd_dpaa**) provides poll mode driver
+support for the inbuilt NIC found in the **NXP DPAA** SoC family.
+
+More information can be found at `NXP Official Website
+<http://www.nxp.com/products/microcontrollers-and-processors/arm-processors/qoriq-arm-processors:QORIQ-ARM>`_.
+
+NXP DPAA (Data Path Acceleration Architecture - Gen 1)
+------------------------------------------------------
+
+This section provides an overview of the NXP DPAA architecture
+and how it is integrated into the DPDK.
+
+Contents summary
+
+- DPAA overview
+- DPAA driver architecture overview
+
+.. _dpaa_overview:
+
+DPAA Overview
+~~~~~~~~~~~~~
+
+Reference: `FSL DPAA Architecture <http://www.nxp.com/assets/documents/data/en/white-papers/QORIQDPAAWP.pdf>`_.
+
+The QorIQ Data Path Acceleration Architecture (DPAA) is a set of hardware
+components on specific QorIQ series multicore processors. This architecture
+provides the infrastructure to support simplified sharing of networking
+interfaces and accelerators by multiple CPU cores, and the accelerators
+themselves.
+
+DPAA includes:
+
+- Cores
+- Network and packet I/O
+- Hardware offload accelerators
+- Infrastructure required to facilitate flow of packets between the components above
+
+Infrastructure components are:
+
+- The Queue Manager (QMan) is a hardware accelerator that manages frame queues.
+ It allows CPUs and other accelerators connected to the SoC datapath to
+ enqueue and dequeue ethernet frames, thus providing the infrastructure for
+ data exchange among CPUs and datapath accelerators.
+- The Buffer Manager (BMan) is a hardware buffer pool management block that
+ allows software and accelerators on the datapath to acquire and release
+ buffers in order to build frames.
+
+Hardware accelerators are:
+
+- SEC - Cryptographic accelerator
+- PME - Pattern matching engine
+
+The Network and packet I/O component:
+
+- The Frame Manager (FMan) is a key component in the DPAA and makes use of the
+ DPAA infrastructure (QMan and BMan). FMan is responsible for packet
+ distribution and policing. Each frame can be parsed, classified and results
+ may be attached to the frame. This meta data can be used to select
+ particular QMan queue, which the packet is forwarded to.
+
+
+DPAA DPDK - Poll Mode Driver Overview
+-------------------------------------
+
+This section provides an overview of the drivers for DPAA:
+
+* Bus driver and associated "DPAA infrastructure" drivers
+* Functional object drivers (such as Ethernet).
+
+Brief description of each driver is provided in layout below as well as
+in the following sections.
+
+.. code-block:: console
+
+ +------------+
+ | DPDK DPAA |
+ | PMD |
+ +-----+------+
+ |
+ +-----+------+ +---------------+
+ : Ethernet :.......| DPDK DPAA |
+ . . . . . . . . . : (FMAN) : | Mempool driver|
+ . +---+---+----+ | (BMAN) |
+ . ^ | +-----+---------+
+ . | |<enqueue, .
+ . | | dequeue> .
+ . | | .
+ . +---+---V----+ .
+ . . . . . . . . . . .: Portal drv : .
+ . . : : .
+ . . +-----+------+ .
+ . . : QMAN : .
+ . . : Driver : .
+ +----+------+-------+ +-----+------+ .
+ | DPDK DPAA Bus | | .
+ | driver |....................|.....................
+ | /bus/dpaa | |
+ +-------------------+ |
+ |
+ ========================== HARDWARE =====|========================
+ PHY
+ =========================================|========================
+
+In the above representation, solid lines represent components which interface
+with DPDK RTE Framework and dotted lines represent DPAA internal components.
+
+DPAA Bus driver
+~~~~~~~~~~~~~~~
+
+The DPAA bus driver is a ``rte_bus`` driver which scans the platform like bus.
+Key functions include:
+
+- Scanning and parsing the various objects and adding them to their respective
+ device list.
+- Performing probe for available drivers against each scanned device
+- Creating necessary ethernet instance before passing control to the PMD
+
+DPAA NIC Driver (PMD)
+~~~~~~~~~~~~~~~~~~~~~
+
+DPAA PMD is traditional DPDK PMD which provides necessary interface between
+RTE framework and DPAA internal components/drivers.
+
+- Once devices have been identified by DPAA Bus, each device is associated
+ with the PMD
+- PMD is responsible for implementing necessary glue layer between RTE APIs
+ and lower level QMan and FMan blocks.
+ The Ethernet driver is bound to a FMAN port and implements the interfaces
+ needed to connect the DPAA network interface to the network stack.
+ Each FMAN Port corresponds to a DPDK network interface.
+
+
+Features
+^^^^^^^^
+
+ Features of the DPAA PMD are:
+
+ - Multiple queues for TX and RX
+ - Receive Side Scaling (RSS)
+ - Packet type information
+ - Checksum offload
+ - Promiscuous mode
+
+DPAA Mempool Driver
+~~~~~~~~~~~~~~~~~~~
+
+DPAA has a hardware offloaded buffer pool manager, called BMan, or Buffer
+Manager.
+
+- Using standard Mempools operations RTE API, the mempool driver interfaces
+ with RTE to service each mempool creation, deletion, buffer allocation and
+ deallocation requests.
+- Each FMAN instance has a BMan pool attached to it during initialization.
+ Each Tx frame can be automatically released by hardware, if allocated from
+ this pool.
+
+
+Supported DPAA SoCs
+-------------------
+
+- LS1043A/LS1023A
+- LS1046A/LS1026A
+
+Prerequisites
+-------------
+
+There are three main pre-requisities for executing DPAA PMD on a DPAA
+compatible board:
+
+1. **ARM 64 Tool Chain**
+
+ For example, the `*aarch64* Linaro Toolchain <https://releases.linaro.org/components/toolchain/binaries/6.4-2017.08/aarch64-linux-gnu/>`_.
+
+2. **Linux Kernel**
+
+ It can be obtained from `NXP's Github hosting <https://github.com/qoriq-open-source/linux>`_.
+
+3. **Rootfile system**
+
+ Any *aarch64* supporting filesystem can be used. For example,
+ Ubuntu 15.10 (Wily) or 16.04 LTS (Xenial) userland which can be obtained
+ from `here <http://cdimage.ubuntu.com/ubuntu-base/releases/16.04/release/ubuntu-base-16.04.1-base-arm64.tar.gz>`_.
+
+4. **FMC Tool**
+
+ Before any DPDK application can be executed, the Frame Manager Configuration
+ Tool (FMC) need to be executed to set the configurations of the queues. This
+ includes the queue state, RSS and other policies.
+ This tool can be obtained from `NXP (Freescale) Public Git Repository <https://github.com/qoriq-open-source/fmc>`_.
+
+ This tool needs configuration files which are available in the
+ :ref:`DPDK Extra Scripts <extra_scripts>`, described below for DPDK usages.
+
+As an alternative method, DPAA PMD can also be executed using images provided
+as part of SDK from NXP. The SDK includes all the above prerequisites necessary
+to bring up a DPAA board.
+
+The following dependencies are not part of DPDK and must be installed
+separately:
+
+- **NXP Linux SDK**
+
+ NXP Linux software development kit (SDK) includes support for family
+ of QorIQ® ARM-Architecture-based system on chip (SoC) processors
+ and corresponding boards.
+
+ It includes the Linux board support packages (BSPs) for NXP SoCs,
+ a fully operational tool chain, kernel and board specific modules.
+
+ SDK and related information can be obtained from: `NXP QorIQ SDK <http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX>`_.
+
+
+.. _extra_scripts:
+
+- **DPDK Extra Scripts**
+
+ DPAA based resources can be configured easily with the help of ready scripts
+ as provided in the DPDK Extra repository.
+
+ `DPDK Extras Scripts <https://github.com/qoriq-open-source/dpdk-extras>`_.
+
+Currently supported by DPDK:
+
+- NXP SDK **2.0+**.
+- Supported architectures: **arm64 LE**.
+
+- Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>`
+ to setup the basic DPDK environment.
+
+.. note::
+
+ Some part of dpaa bus code (qbman and fman - library) routines are
+ dual licensed (BSD & GPLv2), however they are used as BSD in DPDK in userspace.
+
+Pre-Installation Configuration
+------------------------------
+
+Config File Options
+~~~~~~~~~~~~~~~~~~~
+
+The following options can be modified in the ``config`` file.
+Please note that enabling debugging options may affect system performance.
+
+- ``CONFIG_RTE_LIBRTE_DPAA_BUS`` (default ``n``)
+
+ By default it is enabled only for defconfig_arm64-dpaa-* config.
+ Toggle compilation of the ``librte_bus_dpaa`` driver.
+
+- ``CONFIG_RTE_LIBRTE_DPAA_PMD`` (default ``n``)
+
+ By default it is enabled only for defconfig_arm64-dpaa-* config.
+ Toggle compilation of the ``librte_pmd_dpaa`` driver.
+
+- ``CONFIG_RTE_LIBRTE_DPAA_DEBUG_DRIVER`` (default ``n``)
+
+ Toggles display of bus configurations and enables a debugging queue
+ to fetch error (Rx/Tx) packets to driver. By default, packets with errors
+ (like wrong checksum) are dropped by the hardware.
+
+- ``CONFIG_RTE_LIBRTE_DPAA_HWDEBUG`` (default ``n``)
+
+ Enables debugging of the Queue and Buffer Manager layer which interacts
+ with the DPAA hardware.
+
+- ``CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS`` (default ``dpaa``)
+
+ This is not a DPAA specific configuration - it is a generic RTE config.
+ For optimal performance and hardware utilization, it is expected that DPAA
+ Mempool driver is used for mempools. For that, this configuration needs to
+ enabled.
+
+Environment Variables
+~~~~~~~~~~~~~~~~~~~~~
+
+DPAA drivers uses the following environment variables to configure its
+state during application initialization:
+
+- ``DPAA_NUM_RX_QUEUES`` (default 1)
+
+ This defines the number of Rx queues configured for an application, per
+ port. Hardware would distribute across these many number of queues on Rx
+ of packets.
+ In case the application is configured to use lesser number of queues than
+ configured above, it might result in packet loss (because of distribution).
+
+
+Driver compilation and testing
+------------------------------
+
+Refer to the document :ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>`
+for details.
+
+#. Running testpmd:
+
+ Follow instructions available in the document
+ :ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>`
+ to run testpmd.
+
+ Example output:
+
+ .. code-block:: console
+
+ ./arm64-dpaa-linuxapp-gcc/testpmd -c 0xff -n 1 \
+ -- -i --portmask=0x3 --nb-cores=1 --no-flush-rx
+
+ .....
+ EAL: Registered [pci] bus.
+ EAL: Registered [dpaa] bus.
+ EAL: Detected 4 lcore(s)
+ .....
+ EAL: dpaa: Bus scan completed
+ .....
+ Configuring Port 0 (socket 0)
+ Port 0: 00:00:00:00:00:01
+ Configuring Port 1 (socket 0)
+ Port 1: 00:00:00:00:00:02
+ .....
+ Checking link statuses...
+ Port 0 Link Up - speed 10000 Mbps - full-duplex
+ Port 1 Link Up - speed 10000 Mbps - full-duplex
+ Done
+ testpmd>
+
+Limitations
+-----------
+
+Platform Requirement
+~~~~~~~~~~~~~~~~~~~~
+
+DPAA drivers for DPDK can only work on NXP SoCs as listed in the
+``Supported DPAA SoCs``.
+
+Maximum packet length
+~~~~~~~~~~~~~~~~~~~~~
+
+The DPAA SoC family support a maximum of a 10240 jumbo frame. The value
+is fixed and cannot be changed. So, even when the ``rxmode.max_rx_pkt_len``
+member of ``struct rte_eth_conf`` is set to a value lower than 10240, frames
+up to 10240 bytes can still reach the host interface.
+
+Multiprocess Support
+~~~~~~~~~~~~~~~~~~~~
+
+Current version of DPAA driver doesn't support multi-process applications
+where I/O is performed using secondary processes. This feature would be
+implemented in subsequent versions.
diff --git a/doc/guides/nics/dpaa2.rst b/doc/guides/nics/dpaa2.rst
index d6b1f21e..85bc0488 100644
--- a/doc/guides/nics/dpaa2.rst
+++ b/doc/guides/nics/dpaa2.rst
@@ -448,7 +448,7 @@ compatible board:
1. **ARM 64 Tool Chain**
- For example, the `*aarch64* Linaro Toolchain <https://releases.linaro.org/components/toolchain/binaries/4.9-2017.01/aarch64-linux-gnu>`_.
+ For example, the `*aarch64* Linaro Toolchain <https://releases.linaro.org/components/toolchain/binaries/6.4-2017.08/aarch64-linux-gnu/>`_.
2. **Linux Kernel**
@@ -487,8 +487,8 @@ separately:
Currently supported by DPDK:
-- NXP SDK **2.0+**.
-- MC Firmware version **10.0.0** and higher.
+- NXP SDK **17.08+**.
+- MC Firmware version **10.3.1** and higher.
- Supported architectures: **arm64 LE**.
- Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup the basic DPDK environment.
@@ -496,7 +496,7 @@ Currently supported by DPDK:
.. note::
Some part of fslmc bus code (mc flib - object library) routines are
- dual licensed (BSD & GPLv2).
+ dual licensed (BSD & GPLv2), however they are used as BSD in DPDK in userspace.
Pre-Installation Configuration
------------------------------
diff --git a/doc/guides/nics/fail_safe.rst b/doc/guides/nics/fail_safe.rst
index 34ecae2d..c4e3d2e8 100644
--- a/doc/guides/nics/fail_safe.rst
+++ b/doc/guides/nics/fail_safe.rst
@@ -136,7 +136,7 @@ This section shows some example of using **testpmd** with a fail-safe PMD.
.. code-block:: console
$RTE_TARGET/build/app/testpmd -c 0xff -n 4 \
- --vdev 'net_failsafe0,mac=de:ad:be:ef:01:02,dev(84:00.0),dev(net_ring0)'
+ --vdev 'net_failsafe0,mac=de:ad:be:ef:01:02,dev(84:00.0),dev(net_ring0)' \
-b 84:00.0 -b 00:04.0 -- -i
If the slave device being used is not blacklisted, it will be probed by the
@@ -150,7 +150,7 @@ This section shows some example of using **testpmd** with a fail-safe PMD.
.. code-block:: console
$RTE_TARGET/build/app/testpmd -c 0xff -n 4 \
- --vdev 'net_failsafe0,mac=de:ad:be:ef:01:02,dev(84:00.0),dev(net_ring0)'
+ --vdev 'net_failsafe0,mac=de:ad:be:ef:01:02,dev(84:00.0),dev(net_ring0)' \
-w 81:00.0 -- -i
#. Start testpmd using a flexible device definition
diff --git a/doc/guides/nics/features.rst b/doc/guides/nics/features.rst
index 37ffbc68..bfeae80e 100644
--- a/doc/guides/nics/features.rst
+++ b/doc/guides/nics/features.rst
@@ -131,7 +131,8 @@ Lock-free Tx queue
If a PMD advertises DEV_TX_OFFLOAD_MT_LOCKFREE capable, multiple threads can
invoke rte_eth_tx_burst() concurrently on the same Tx queue without SW lock.
-* **[provides] rte_eth_dev_info**: ``tx_offload_capa:DEV_TX_OFFLOAD_MT_LOCKFREE``.
+* **[uses] rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_MT_LOCKFREE``.
+* **[provides] rte_eth_dev_info**: ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_MT_LOCKFREE``.
* **[related] API**: ``rte_eth_tx_burst()``.
@@ -179,7 +180,7 @@ Jumbo frame
Supports Rx jumbo frames.
-* **[uses] user config**: ``dev_conf.rxmode.jumbo_frame``,
+* **[uses] rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_JUMBO_FRAME``.
``dev_conf.rxmode.max_rx_pkt_len``.
* **[related] rte_eth_dev_info**: ``max_rx_pktlen``.
* **[related] API**: ``rte_eth_dev_set_mtu()``.
@@ -192,7 +193,7 @@ Scattered Rx
Supports receiving segmented mbufs.
-* **[uses] user config**: ``dev_conf.rxmode.enable_scatter``.
+* **[uses] rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_SCATTER``.
* **[implements] datapath**: ``Scattered Rx function``.
* **[implements] rte_eth_dev_data**: ``scattered_rx``.
* **[provides] eth_dev_ops**: ``rxq_info_get:scattered_rx``.
@@ -206,11 +207,11 @@ LRO
Supports Large Receive Offload.
-* **[uses] user config**: ``dev_conf.rxmode.enable_lro``.
+* **[uses] rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_TCP_LRO``.
* **[implements] datapath**: ``LRO functionality``.
* **[implements] rte_eth_dev_data**: ``lro``.
* **[provides] mbuf**: ``mbuf.ol_flags:PKT_RX_LRO``, ``mbuf.tso_segsz``.
-* **[provides] rte_eth_dev_info**: ``rx_offload_capa:DEV_RX_OFFLOAD_TCP_LRO``.
+* **[provides] rte_eth_dev_info**: ``rx_offload_capa,rx_queue_offload_capa:DEV_RX_OFFLOAD_TCP_LRO``.
.. _nic_features_tso:
@@ -220,11 +221,12 @@ TSO
Supports TCP Segmentation Offloading.
+* **[uses] rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_TCP_TSO``.
* **[uses] rte_eth_desc_lim**: ``nb_seg_max``, ``nb_mtu_seg_max``.
* **[uses] mbuf**: ``mbuf.ol_flags:PKT_TX_TCP_SEG``.
* **[uses] mbuf**: ``mbuf.tso_segsz``, ``mbuf.l2_len``, ``mbuf.l3_len``, ``mbuf.l4_len``.
* **[implements] datapath**: ``TSO functionality``.
-* **[provides] rte_eth_dev_info**: ``tx_offload_capa:DEV_TX_OFFLOAD_TCP_TSO,DEV_TX_OFFLOAD_UDP_TSO``.
+* **[provides] rte_eth_dev_info**: ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_TCP_TSO,DEV_TX_OFFLOAD_UDP_TSO``.
.. _nic_features_promiscuous_mode:
@@ -363,7 +365,7 @@ VLAN filter
Supports filtering of a VLAN Tag identifier.
-* **[uses] user config**: ``dev_conf.rxmode.hw_vlan_filter``.
+* **[uses] rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_VLAN_FILTER``.
* **[implements] eth_dev_ops**: ``vlan_filter_set``.
* **[related] API**: ``rte_eth_dev_vlan_filter()``.
@@ -499,7 +501,7 @@ CRC offload
Supports CRC stripping by hardware.
-* **[uses] user config**: ``dev_conf.rxmode.hw_strip_crc``.
+* **[uses] rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_CRC_STRIP``.
.. _nic_features_vlan_offload:
@@ -509,12 +511,12 @@ VLAN offload
Supports VLAN offload to hardware.
-* **[uses] user config**: ``dev_conf.rxmode.hw_vlan_strip``,
- ``dev_conf.rxmode.hw_vlan_filter``, ``dev_conf.rxmode.hw_vlan_extend``.
+* **[uses] rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_VLAN_STRIP,DEV_RX_OFFLOAD_VLAN_FILTER,DEV_RX_OFFLOAD_VLAN_EXTEND``.
+* **[uses] rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_VLAN_INSERT``.
* **[implements] eth_dev_ops**: ``vlan_offload_set``.
* **[provides] mbuf**: ``mbuf.ol_flags:PKT_RX_VLAN_STRIPPED``, ``mbuf.vlan_tci``.
-* **[provides] rte_eth_dev_info**: ``rx_offload_capa:DEV_RX_OFFLOAD_VLAN_STRIP``,
- ``tx_offload_capa:DEV_TX_OFFLOAD_VLAN_INSERT``.
+* **[provides] rte_eth_dev_info**: ``rx_offload_capa,rx_queue_offload_capa:DEV_RX_OFFLOAD_VLAN_STRIP``,
+ ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_VLAN_INSERT``.
* **[related] API**: ``rte_eth_dev_set_vlan_offload()``,
``rte_eth_dev_get_vlan_offload()``.
@@ -526,11 +528,13 @@ QinQ offload
Supports QinQ (queue in queue) offload.
+* **[uses] rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_QINQ_STRIP``.
+* **[uses] rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_QINQ_INSERT``.
* **[uses] mbuf**: ``mbuf.ol_flags:PKT_TX_QINQ_PKT``.
* **[provides] mbuf**: ``mbuf.ol_flags:PKT_RX_QINQ_STRIPPED``, ``mbuf.vlan_tci``,
``mbuf.vlan_tci_outer``.
-* **[provides] rte_eth_dev_info**: ``rx_offload_capa:DEV_RX_OFFLOAD_QINQ_STRIP``,
- ``tx_offload_capa:DEV_TX_OFFLOAD_QINQ_INSERT``.
+* **[provides] rte_eth_dev_info**: ``rx_offload_capa,rx_queue_offload_capa:DEV_RX_OFFLOAD_QINQ_STRIP``,
+ ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_QINQ_INSERT``.
.. _nic_features_l3_checksum_offload:
@@ -540,14 +544,15 @@ L3 checksum offload
Supports L3 checksum offload.
-* **[uses] user config**: ``dev_conf.rxmode.hw_ip_checksum``.
+* **[uses] rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_IPV4_CKSUM``.
+* **[uses] rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_IPV4_CKSUM``.
* **[uses] mbuf**: ``mbuf.ol_flags:PKT_TX_IP_CKSUM``,
``mbuf.ol_flags:PKT_TX_IPV4`` | ``PKT_TX_IPV6``.
* **[provides] mbuf**: ``mbuf.ol_flags:PKT_RX_IP_CKSUM_UNKNOWN`` |
``PKT_RX_IP_CKSUM_BAD`` | ``PKT_RX_IP_CKSUM_GOOD`` |
``PKT_RX_IP_CKSUM_NONE``.
-* **[provides] rte_eth_dev_info**: ``rx_offload_capa:DEV_RX_OFFLOAD_IPV4_CKSUM``,
- ``tx_offload_capa:DEV_TX_OFFLOAD_IPV4_CKSUM``.
+* **[provides] rte_eth_dev_info**: ``rx_offload_capa,rx_queue_offload_capa:DEV_RX_OFFLOAD_IPV4_CKSUM``,
+ ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_IPV4_CKSUM``.
.. _nic_features_l4_checksum_offload:
@@ -557,15 +562,29 @@ L4 checksum offload
Supports L4 checksum offload.
+* **[uses] rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_UDP_CKSUM,DEV_RX_OFFLOAD_TCP_CKSUM``.
+* **[uses] rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_UDP_CKSUM,DEV_TX_OFFLOAD_TCP_CKSUM,DEV_TX_OFFLOAD_SCTP_CKSUM``.
+* **[uses] user config**: ``dev_conf.rxmode.hw_ip_checksum``.
* **[uses] mbuf**: ``mbuf.ol_flags:PKT_TX_IPV4`` | ``PKT_TX_IPV6``,
``mbuf.ol_flags:PKT_TX_L4_NO_CKSUM`` | ``PKT_TX_TCP_CKSUM`` |
``PKT_TX_SCTP_CKSUM`` | ``PKT_TX_UDP_CKSUM``.
* **[provides] mbuf**: ``mbuf.ol_flags:PKT_RX_L4_CKSUM_UNKNOWN`` |
``PKT_RX_L4_CKSUM_BAD`` | ``PKT_RX_L4_CKSUM_GOOD`` |
``PKT_RX_L4_CKSUM_NONE``.
-* **[provides] rte_eth_dev_info**: ``rx_offload_capa:DEV_RX_OFFLOAD_UDP_CKSUM,DEV_RX_OFFLOAD_TCP_CKSUM``,
- ``tx_offload_capa:DEV_TX_OFFLOAD_UDP_CKSUM,DEV_TX_OFFLOAD_TCP_CKSUM,DEV_TX_OFFLOAD_SCTP_CKSUM``.
+* **[provides] rte_eth_dev_info**: ``rx_offload_capa,rx_queue_offload_capa:DEV_RX_OFFLOAD_UDP_CKSUM,DEV_RX_OFFLOAD_TCP_CKSUM``,
+ ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_UDP_CKSUM,DEV_TX_OFFLOAD_TCP_CKSUM,DEV_TX_OFFLOAD_SCTP_CKSUM``.
+
+.. _nic_features_hw_timestamp:
+
+Timestamp offload
+-----------------
+Supports Timestamp.
+
+* **[uses] rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_TIMESTAMP``.
+* **[provides] mbuf**: ``mbuf.ol_flags:PKT_RX_TIMESTAMP``.
+* **[provides] mbuf**: ``mbuf.timestamp``.
+* **[provides] rte_eth_dev_info**: ``rx_offload_capa,rx_queue_offload_capa: DEV_RX_OFFLOAD_TIMESTAMP``.
.. _nic_features_macsec_offload:
@@ -574,9 +593,11 @@ MACsec offload
Supports MACsec.
+* **[uses] rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_MACSEC_STRIP``.
+* **[uses] rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_MACSEC_INSERT``.
* **[uses] mbuf**: ``mbuf.ol_flags:PKT_TX_MACSEC``.
-* **[provides] rte_eth_dev_info**: ``rx_offload_capa:DEV_RX_OFFLOAD_MACSEC_STRIP``,
- ``tx_offload_capa:DEV_TX_OFFLOAD_MACSEC_INSERT``.
+* **[provides] rte_eth_dev_info**: ``rx_offload_capa,rx_queue_offload_capa:DEV_RX_OFFLOAD_MACSEC_STRIP``,
+ ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_MACSEC_INSERT``.
.. _nic_features_inner_l3_checksum:
@@ -586,14 +607,16 @@ Inner L3 checksum
Supports inner packet L3 checksum.
+* **[uses] rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_OUTER_IPV4_CKSUM``.
+* **[uses] rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM``.
* **[uses] mbuf**: ``mbuf.ol_flags:PKT_TX_IP_CKSUM``,
``mbuf.ol_flags:PKT_TX_IPV4`` | ``PKT_TX_IPV6``,
``mbuf.ol_flags:PKT_TX_OUTER_IP_CKSUM``,
``mbuf.ol_flags:PKT_TX_OUTER_IPV4`` | ``PKT_TX_OUTER_IPV6``.
* **[uses] mbuf**: ``mbuf.outer_l2_len``, ``mbuf.outer_l3_len``.
* **[provides] mbuf**: ``mbuf.ol_flags:PKT_RX_EIP_CKSUM_BAD``.
-* **[provides] rte_eth_dev_info**: ``rx_offload_capa:DEV_RX_OFFLOAD_OUTER_IPV4_CKSUM``,
- ``tx_offload_capa:DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM``.
+* **[provides] rte_eth_dev_info**: ``rx_offload_capa,rx_queue_offload_capa:DEV_RX_OFFLOAD_OUTER_IPV4_CKSUM``,
+ ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM``.
.. _nic_features_inner_l4_checksum:
@@ -617,6 +640,15 @@ Supports packet type parsing and returns a list of supported types.
.. _nic_features_timesync:
+Mbuf fast free
+--------------
+
+Supports optimization for fast release of mbufs following successful Tx.
+Requires that per queue, all mbufs come from the same mempool and has refcnt = 1.
+
+* **[uses] rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_MBUF_FAST_FREE``.
+* **[provides] rte_eth_dev_info**: ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_MBUF_FAST_FREE``.
+
Timesync
--------
diff --git a/doc/guides/nics/features/bnxt.ini b/doc/guides/nics/features/bnxt.ini
index 119132e1..ef45dd76 100644
--- a/doc/guides/nics/features/bnxt.ini
+++ b/doc/guides/nics/features/bnxt.ini
@@ -5,21 +5,38 @@
;
[Features]
Link status = Y
+Rx interrupt = Y
Queue start/stop = Y
MTU update = Y
Jumbo frame = Y
LRO = Y
+TSO = Y
Promiscuous mode = Y
Allmulticast mode = Y
Unicast MAC filter = Y
Multicast MAC filter = Y
+RSS hash = Y
+RSS key update = Y
RSS reta update = Y
+VMDq = Y
SR-IOV = Y
VLAN filter = Y
+Ethertype filter = Y
+N-tuple filter = Y
+Flow control = Y
+Flow API = Y
+L3 checksum offload = Y
+L4 checksum offload = Y
+Inner L3 checksum = Y
+Inner L4 checksum = Y
+Packet type parsing = Y
VLAN offload = Y
+Rx descriptor status = Y
+Tx descriptor status = Y
Basic stats = Y
Extended stats = Y
FW version = Y
+EEPROM dump = Y
LED = Y
Linux UIO = Y
Linux VFIO = Y
diff --git a/doc/guides/nics/features/default.ini b/doc/guides/nics/features/default.ini
index 54243069..dc527ddf 100644
--- a/doc/guides/nics/features/default.ini
+++ b/doc/guides/nics/features/default.ini
@@ -48,6 +48,7 @@ VLAN offload =
QinQ offload =
L3 checksum offload =
L4 checksum offload =
+Timestamp offload =
MACsec offload =
Inner L3 checksum =
Inner L4 checksum =
@@ -75,3 +76,4 @@ x86-64 =
Usage doc =
Design doc =
Perf doc =
+Mbuf fast free =
diff --git a/doc/guides/nics/features/dpaa.ini b/doc/guides/nics/features/dpaa.ini
new file mode 100644
index 00000000..24cfd856
--- /dev/null
+++ b/doc/guides/nics/features/dpaa.ini
@@ -0,0 +1,24 @@
+;
+; Supported features of the 'dpaa' network poll mode driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+[Features]
+Speed capabilities = P
+Link status = Y
+Jumbo frame = Y
+MTU update = Y
+Scattered Rx = Y
+Promiscuous mode = Y
+Allmulticast mode = Y
+Unicast MAC filter = Y
+RSS hash = Y
+Flow control = Y
+L3 checksum offload = Y
+L4 checksum offload = Y
+Packet type parsing = Y
+Basic stats = Y
+Extended stats = Y
+FW version = Y
+ARMv8 = Y
+Usage doc = Y
diff --git a/doc/guides/nics/features/dpaa2.ini b/doc/guides/nics/features/dpaa2.ini
index 146e087f..6ebbab4b 100644
--- a/doc/guides/nics/features/dpaa2.ini
+++ b/doc/guides/nics/features/dpaa2.ini
@@ -6,6 +6,7 @@
[Features]
Speed capabilities = P
Link status = Y
+Link status event = Y
Queue start/stop = Y
Jumbo frame = Y
MTU update = Y
@@ -20,6 +21,7 @@ L3 checksum offload = Y
L4 checksum offload = Y
Packet type parsing = Y
Basic stats = Y
+Extended stats = Y
FW version = Y
Linux VFIO = Y
ARMv8 = Y
diff --git a/doc/guides/nics/features/enic.ini b/doc/guides/nics/features/enic.ini
index 0de3ef53..498341f0 100644
--- a/doc/guides/nics/features/enic.ini
+++ b/doc/guides/nics/features/enic.ini
@@ -25,6 +25,7 @@ L3 checksum offload = Y
L4 checksum offload = Y
Packet type parsing = Y
Basic stats = Y
+Multiprocess aware = Y
BSD nic_uio = Y
Linux UIO = Y
Linux VFIO = Y
diff --git a/doc/guides/nics/features/fm10k_vec.ini b/doc/guides/nics/features/fm10k_vec.ini
deleted file mode 100644
index 4917e820..00000000
--- a/doc/guides/nics/features/fm10k_vec.ini
+++ /dev/null
@@ -1,35 +0,0 @@
-;
-; Supported features of the 'fm10k_vec' network poll mode driver.
-;
-; Refer to default.ini for the full list of available PMD features.
-;
-[Features]
-Speed capabilities = P
-Rx interrupt = Y
-Queue start/stop = Y
-Jumbo frame = Y
-Scattered Rx = Y
-TSO = Y
-Promiscuous mode = Y
-Allmulticast mode = Y
-Unicast MAC filter = Y
-Multicast MAC filter = Y
-RSS hash = Y
-RSS key update = Y
-RSS reta update = Y
-VMDq = Y
-VLAN filter = Y
-CRC offload = Y
-VLAN offload = Y
-L3 checksum offload = Y
-L4 checksum offload = Y
-Packet type parsing = Y
-Basic stats = Y
-Extended stats = Y
-Stats per queue = Y
-Multiprocess aware = Y
-BSD nic_uio = Y
-Linux UIO = Y
-Linux VFIO = Y
-x86-32 = Y
-x86-64 = Y
diff --git a/doc/guides/nics/features/liquidio.ini b/doc/guides/nics/features/liquidio.ini
index 3bea03a3..f628b764 100644
--- a/doc/guides/nics/features/liquidio.ini
+++ b/doc/guides/nics/features/liquidio.ini
@@ -7,8 +7,10 @@
Speed capabilities = Y
Link status = Y
Link status event = Y
+MTU update = Y
Jumbo frame = Y
Scattered Rx = Y
+Promiscuous mode = Y
Allmulticast mode = Y
RSS hash = Y
RSS key update = Y
diff --git a/doc/guides/nics/features/mlx4.ini b/doc/guides/nics/features/mlx4.ini
index 1d5f2668..f6efd21d 100644
--- a/doc/guides/nics/features/mlx4.ini
+++ b/doc/guides/nics/features/mlx4.ini
@@ -27,7 +27,6 @@ Inner L4 checksum = Y
Packet type parsing = Y
Basic stats = Y
Stats per queue = Y
-Multiprocess aware = Y
Other kdrv = Y
Power8 = Y
x86-32 = Y
diff --git a/doc/guides/nics/features/mlx5.ini b/doc/guides/nics/features/mlx5.ini
index 2913591c..c3636391 100644
--- a/doc/guides/nics/features/mlx5.ini
+++ b/doc/guides/nics/features/mlx5.ini
@@ -7,6 +7,7 @@
Speed capabilities = Y
Link status = Y
Link status event = Y
+Removal event = Y
Rx interrupt = Y
Queue start/stop = Y
MTU update = Y
@@ -38,6 +39,5 @@ Multiprocess aware = Y
Other kdrv = Y
ARMv8 = Y
Power8 = Y
-x86-32 = Y
x86-64 = Y
Usage doc = Y
diff --git a/doc/guides/nics/features/mrvl.ini b/doc/guides/nics/features/mrvl.ini
new file mode 100644
index 00000000..00d96218
--- /dev/null
+++ b/doc/guides/nics/features/mrvl.ini
@@ -0,0 +1,23 @@
+;
+; Supported features of the 'mrvl' network poll mode driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+[Features]
+Speed capabilities = Y
+Link status = Y
+MTU update = Y
+Jumbo frame = Y
+Promiscuous mode = Y
+Allmulticast mode = Y
+Unicast MAC filter = Y
+Multicast MAC filter = Y
+RSS hash = Y
+VLAN filter = Y
+CRC offload = Y
+L3 checksum offload = Y
+L4 checksum offload = Y
+Packet type parsing = Y
+Basic stats = Y
+ARMv8 = Y
+Usage doc = Y
diff --git a/doc/guides/nics/features/nfp.ini b/doc/guides/nics/features/nfp_pf.ini
index a1281d2a..d2899e7f 100644
--- a/doc/guides/nics/features/nfp.ini
+++ b/doc/guides/nics/features/nfp_pf.ini
@@ -16,7 +16,6 @@ TSO = Y
RSS hash = Y
RSS key update = Y
RSS reta update = Y
-SR-IOV = Y
Flow control = Y
VLAN offload = Y
L3 checksum offload = Y
diff --git a/doc/guides/nics/features/fm10k_vf_vec.ini b/doc/guides/nics/features/nfp_vf.ini
index 6f4a639a..d2899e7f 100644
--- a/doc/guides/nics/features/fm10k_vf_vec.ini
+++ b/doc/guides/nics/features/nfp_vf.ini
@@ -1,29 +1,28 @@
;
-; Supported features of the 'fm10kvf_vec' network poll mode driver.
+; Supported features of the 'nfp' network poll mode driver.
;
; Refer to default.ini for the full list of available PMD features.
;
[Features]
-Speed capabilities = P
+Speed capabilities = Y
+Link status = Y
+Link status event = Y
Rx interrupt = Y
Queue start/stop = Y
+MTU update = Y
Jumbo frame = Y
-Scattered Rx = Y
+Promiscuous mode = Y
TSO = Y
RSS hash = Y
RSS key update = Y
RSS reta update = Y
-CRC offload = Y
+Flow control = Y
VLAN offload = Y
L3 checksum offload = Y
L4 checksum offload = Y
-Packet type parsing = Y
Basic stats = Y
-Extended stats = Y
Stats per queue = Y
-Multiprocess aware = Y
-BSD nic_uio = Y
Linux UIO = Y
Linux VFIO = Y
-x86-32 = Y
x86-64 = Y
+Usage doc = Y
diff --git a/doc/guides/nics/features/octeontx.ini b/doc/guides/nics/features/octeontx.ini
new file mode 100644
index 00000000..c92d5aa0
--- /dev/null
+++ b/doc/guides/nics/features/octeontx.ini
@@ -0,0 +1,19 @@
+;
+; Supported features of the 'octeontx' network poll mode driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+[Features]
+Speed capabilities = Y
+Link status = Y
+Lock-free Tx queue = Y
+Queue start/stop = P
+Jumbo frame = Y
+Promiscuous mode = Y
+Unicast MAC filter = P
+CRC offload = Y
+Packet type parsing = Y
+Basic stats = Y
+Linux VFIO = Y
+ARMv8 = Y
+Usage doc = Y
diff --git a/doc/guides/nics/features/sfc_efx.ini b/doc/guides/nics/features/sfc_efx.ini
index 1db7f67b..03890f30 100644
--- a/doc/guides/nics/features/sfc_efx.ini
+++ b/doc/guides/nics/features/sfc_efx.ini
@@ -25,6 +25,8 @@ VLAN offload = P
L3 checksum offload = Y
L4 checksum offload = Y
Packet type parsing = Y
+Rx descriptor status = Y
+Tx descriptor status = Y
Basic stats = Y
Extended stats = Y
FW version = Y
diff --git a/doc/guides/nics/features/thunderx.ini b/doc/guides/nics/features/thunderx.ini
index b9720be6..62685897 100644
--- a/doc/guides/nics/features/thunderx.ini
+++ b/doc/guides/nics/features/thunderx.ini
@@ -4,6 +4,7 @@
; Refer to default.ini for the full list of available PMD features.
;
[Features]
+Speed capabilities = Y
Link status = Y
Link status event = Y
Queue start/stop = Y
diff --git a/doc/guides/nics/features/xenvirt.ini b/doc/guides/nics/features/xenvirt.ini
deleted file mode 100644
index 8ab5f465..00000000
--- a/doc/guides/nics/features/xenvirt.ini
+++ /dev/null
@@ -1,6 +0,0 @@
-;
-; Supported features of the 'xenvirt' network poll mode driver.
-;
-; Refer to default.ini for the full list of available PMD features.
-;
-[Features]
diff --git a/doc/guides/nics/fm10k.rst b/doc/guides/nics/fm10k.rst
index 7fc48624..b47fc0db 100644
--- a/doc/guides/nics/fm10k.rst
+++ b/doc/guides/nics/fm10k.rst
@@ -161,6 +161,17 @@ FM10000 PMD driver. The switch driver can be acquired from Intel support.
Only Testpoint is validated with DPDK, the latest version that has been
validated with DPDK is 4.1.6.
+Support for Switch Restart
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+For FM10000 multi host based design a DPDK app running in the VM or host needs
+to be aware of the switch's state since it may undergo a quit-restart. When
+the switch goes down the DPDK app will receive a LSC event indicating link
+status down, and the app should stop the worker threads that are polling on
+the Rx/Tx queues. When switch comes up, a LSC event indicating ``LINK_UP`` is
+sent to the app, which can then restart the FM10000 port to resume network
+processing.
+
CRC striping
~~~~~~~~~~~~
diff --git a/doc/guides/nics/i40e.rst b/doc/guides/nics/i40e.rst
index bc200d39..cd468748 100644
--- a/doc/guides/nics/i40e.rst
+++ b/doc/guides/nics/i40e.rst
@@ -78,6 +78,8 @@ Prerequisites
- To get better performance on Intel platforms, please follow the "How to get best performance with NICs on Intel platforms"
section of the :ref:`Getting Started Guide for Linux <linux_gsg>`.
+- Upgrade the NVM/FW version following the `Intel® Ethernet NVM Update Tool Quick Usage Guide for Linux
+ <https://www-ssl.intel.com/content/www/us/en/embedded/products/networking/nvm-update-tool-quick-linux-usage-guide.html>`_ if needed.
Pre-Installation Configuration
------------------------------
@@ -396,13 +398,24 @@ used to classify MPLS packet by using a command in testpmd like:
testpmd> ethertype_filter 0 add mac_ignr 00:00:00:00:00:00 ethertype \
0x8847 fwd queue <M>
-16 Byte Descriptor cannot be used on DPDK VF
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+16 Byte RX Descriptor setting on DPDK VF
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-If the Linux i40e kernel driver is used as host driver, while DPDK i40e PMD
-is used as the VF driver, DPDK cannot choose 16 byte receive descriptor. That
-is to say, user should keep ``CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n`` in
-config file.
+Currently the VF's RX descriptor mode is decided by PF. There's no PF-VF
+interface for VF to request the RX descriptor mode, also no interface to notify
+VF its own RX descriptor mode.
+For all available versions of the i40e driver, these drivers don't support 16
+byte RX descriptor. If the Linux i40e kernel driver is used as host driver,
+while DPDK i40e PMD is used as the VF driver, DPDK cannot choose 16 byte receive
+descriptor. The reason is that the RX descriptor is already set to 32 byte by
+the i40e kernel driver. That is to say, user should keep
+``CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n`` in config file.
+In the future, if the Linux i40e driver supports 16 byte RX descriptor, user
+should make sure the DPDK VF uses the same RX descriptor mode, 16 byte or 32
+byte, as the PF driver.
+
+The same rule for DPDK PF + DPDK VF. The PF and VF should use the same RX
+descriptor mode. Or the VF RX will not work.
Receive packets with Ethertype 0x88A8
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -465,6 +478,11 @@ enabled using the steps below.
setpci -s <XX:XX.X> a8.w=<value>
+Vlan strip of VF
+~~~~~~~~~~~~~~~~
+
+The VF vlan strip function is only supported in the i40e kernel driver >= 2.1.26.
+
High Performance of Small Packets on 40G NIC
--------------------------------------------
diff --git a/doc/guides/nics/index.rst b/doc/guides/nics/index.rst
index 36f4f3ff..23babe93 100644
--- a/doc/guides/nics/index.rst
+++ b/doc/guides/nics/index.rst
@@ -43,6 +43,7 @@ Network Interface Controller Drivers
bnx2x
bnxt
cxgbe
+ dpaa
dpaa2
e1000em
ena
@@ -55,7 +56,9 @@ Network Interface Controller Drivers
liquidio
mlx4
mlx5
+ mrvl
nfp
+ octeontx
qede
sfc_efx
szedata2
diff --git a/doc/guides/nics/ixgbe.rst b/doc/guides/nics/ixgbe.rst
index 696ff693..c687c63f 100644
--- a/doc/guides/nics/ixgbe.rst
+++ b/doc/guides/nics/ixgbe.rst
@@ -227,6 +227,17 @@ So when the user sets different MTUs on PF and VF ports in one physical port,
the real MTU for all these PF and VF ports is the largest value set.
This behavior is based on the kernel driver behavior.
+VF MAC address setting
+~~~~~~~~~~~~~~~~~~~~~~
+
+On ixgbe, the concept of "pool" can be used for different things depending on
+the mode. In VMDq mode, "pool" means a VMDq pool. In IOV mode, "pool" means a
+VF.
+
+There is no RTE API to add a VF's MAC address from the PF. On ixgbe, the
+``rte_eth_dev_mac_addr_add()`` function can be used to add a VF's MAC address,
+as a workaround.
+
Supported Chipsets and NICs
---------------------------
diff --git a/doc/guides/nics/liquidio.rst b/doc/guides/nics/liquidio.rst
index f04cb16d..7bc16040 100644
--- a/doc/guides/nics/liquidio.rst
+++ b/doc/guides/nics/liquidio.rst
@@ -42,7 +42,9 @@ Supported LiquidIO Adapters
-----------------------------
- LiquidIO II CN2350 210SV/225SV
+- LiquidIO II CN2350 210SVPT
- LiquidIO II CN2360 210SV/225SV
+- LiquidIO II CN2360 210SVPT
Pre-Installation Configuration
@@ -195,6 +197,14 @@ This section provides instructions to configure SR-IOV with Linux OS.
Done
testpmd>
+#. Enabling VF promiscuous mode
+
+ One VF per PF can be marked as trusted for promiscuous mode.
+
+ .. code-block:: console
+
+ ip link set dev <PF iface> vf <VF id> trust on
+
Limitations
-----------
diff --git a/doc/guides/nics/mlx4.rst b/doc/guides/nics/mlx4.rst
index f8885b23..5c3fb764 100644
--- a/doc/guides/nics/mlx4.rst
+++ b/doc/guides/nics/mlx4.rst
@@ -1,5 +1,5 @@
.. BSD LICENSE
- Copyright 2012-2015 6WIND S.A.
+ Copyright 2012 6WIND S.A.
Copyright 2015 Mellanox
Redistribution and use in source and binary forms, with or without
@@ -78,29 +78,9 @@ Features
--------
- Multi arch support: x86_64 and POWER8.
-- RSS, also known as RCA, is supported. In this mode the number of
- configured RX queues must be a power of two.
-- VLAN filtering is supported.
- Link state information is provided.
-- Promiscuous mode is supported.
-- All multicast mode is supported.
-- Multiple MAC addresses (unicast, multicast) can be configured.
-- Scattered packets are supported for TX and RX.
-- Inner L3/L4 (IP, TCP and UDP) TX/RX checksum offloading and validation.
-- Outer L3 (IP) TX/RX checksum offloading and validation for VXLAN frames.
-- Secondary process TX is supported.
- RX interrupts.
-Limitations
------------
-
-- RSS hash key cannot be modified.
-- RSS RETA cannot be configured
-- RSS always includes L3 (IPv4/IPv6) and L4 (UDP/TCP). They cannot be
- dissociated.
-- Hardware counters are not implemented (they are software counters).
-- Secondary process RX is not supported.
-
Configuration
-------------
@@ -127,13 +107,6 @@ These options can be modified in the ``.config`` file.
to abort with harmless debugging messages as a workaround.
Relevant only when CONFIG_RTE_LIBRTE_MLX4_DEBUG is enabled.
-- ``CONFIG_RTE_LIBRTE_MLX4_SGE_WR_N`` (default **4**)
-
- Number of scatter/gather elements (SGEs) per work request (WR). Lowering
- this number improves performance but also limits the ability to receive
- scattered packets (packets that do not fit a single mbuf). The default
- value is a safe tradeoff.
-
- ``CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE`` (default **0**)
Amount of data to be inlined during TX operations. Improves latency but
@@ -147,11 +120,6 @@ These options can be modified in the ``.config`` file.
This value is always 1 for RX queues since they use a single MP.
-- ``CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS`` (default **1**)
-
- Toggle software counters. No counters are available if this option is
- disabled since hardware counters are not supported.
-
Environment variables
~~~~~~~~~~~~~~~~~~~~~
@@ -164,9 +132,6 @@ Environment variables
Run-time configuration
~~~~~~~~~~~~~~~~~~~~~~
-- The only constraint when RSS mode is requested is to make sure the number
- of RX queues is a power of two. This is a hardware requirement.
-
- librte_pmd_mlx4 brings kernel network interfaces up during initialization
because it is affected by their state. Forcing them down prevents packets
reception.
diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst
index f4cb18bc..f9558da8 100644
--- a/doc/guides/nics/mlx5.rst
+++ b/doc/guides/nics/mlx5.rst
@@ -92,21 +92,23 @@ Features
- Flow director (RTE_FDIR_MODE_PERFECT, RTE_FDIR_MODE_PERFECT_MAC_VLAN and
RTE_ETH_FDIR_REJECT).
- Flow API.
-- Secondary process TX is supported.
+- Multiple process.
- KVM and VMware ESX SR-IOV modes are supported.
- RSS hash result is supported.
- Hardware TSO.
- Hardware checksum TX offload for VXLAN and GRE.
- RX interrupts.
- Statistics query including Basic, Extended and per queue.
+- Rx HW timestamp.
Limitations
-----------
- Inner RSS for VXLAN frames is not supported yet.
-- Port statistics through software counters only.
+- Port statistics through software counters only. Flow statistics are
+ supported by hardware counters.
- Hardware checksum RX offloads for VXLAN inner header are not supported yet.
-- Secondary process RX is not supported.
+- Forked secondary process not supported.
- Flow pattern without any specific vlan will match for vlan packets as well:
When VLAN spec is not specified in the pattern, the matching rule will be created with VLAN as a wild card.
@@ -124,6 +126,14 @@ Limitations
Will match any ipv4 packet (VLAN included).
+- A multi segment packet must have less than 6 segments in case the Tx burst function
+ is set to multi-packet send or Enhanced multi-packet send. Otherwise it must have
+ less than 50 segments.
+- Count action for RTE flow is only supported in Mellanox OFED 4.2.
+- Flows with a VXLAN Network Identifier equal (or ends to be equal)
+ to 0 are not supported.
+- VXLAN TSO and checksum offloads are not supported on VM.
+
Configuration
-------------
@@ -167,6 +177,23 @@ Environment variables
This is disabled by default since this can also decrease performance for
unaligned packet sizes.
+- ``MLX5_SHUT_UP_BF``
+
+ Configures HW Tx doorbell register as IO-mapped.
+
+ By default, the HW Tx doorbell is configured as a write-combining register.
+ The register would be flushed to HW usually when the write-combining buffer
+ becomes full, but it depends on CPU design.
+
+ Except for vectorized Tx burst routines, a write memory barrier is enforced
+ after updating the register so that the update can be immediately visible to
+ HW.
+
+ When vectorized Tx burst is called, the barrier is set only if the burst size
+ is not aligned to MLX5_VPMD_TX_MAX_BURST. However, setting this environmental
+ variable will bring better latency even though the maximum throughput can
+ slightly decline.
+
Run-time configuration
~~~~~~~~~~~~~~~~~~~~~~
@@ -293,7 +320,7 @@ DPDK and must be installed separately:
This library basically implements send/receive calls to the hardware
queues.
-- **Kernel modules** (mlnx-ofed-kernel)
+- **Kernel modules**
They provide the kernel-side Verbs API and low level device drivers that
manage actual hardware initialization and resources sharing with user
@@ -320,18 +347,33 @@ DPDK and must be installed separately:
Both libraries are BSD and GPL licensed. Linux kernel modules are GPL
licensed.
-Currently supported by DPDK:
+Installation
+~~~~~~~~~~~~
-- Mellanox OFED version: **4.1**.
-- firmware version:
+Either RDMA Core library with a recent enough Linux kernel release
+(recommended) or Mellanox OFED, which provides compatibility with older
+releases.
- - ConnectX-4: **12.20.1010** and above.
- - ConnectX-4 Lx: **14.20.1010** and above.
- - ConnectX-5: **16.20.1010** and above.
- - ConnectX-5 Ex: **16.20.1010** and above.
+RMDA Core with Linux Kernel
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Getting Mellanox OFED
-~~~~~~~~~~~~~~~~~~~~~
+- Minimal kernel version : v4.14 or the most recent 4.14-rc (see `Linux installation documentation`_)
+- Minimal rdma-core version: v15+ commit 0c5f5765213a ("Merge pull request #227 from yishaih/tm")
+ (see `RDMA Core installation documentation`_)
+
+.. _`Linux installation documentation`: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/plain/Documentation/admin-guide/README.rst
+.. _`RDMA Core installation documentation`: https://raw.githubusercontent.com/linux-rdma/rdma-core/master/README.md
+
+Mellanox OFED
+^^^^^^^^^^^^^
+
+- Mellanox OFED version: **4.2**.
+- firmware version:
+
+ - ConnectX-4: **12.21.1000** and above.
+ - ConnectX-4 Lx: **14.21.1000** and above.
+ - ConnectX-5: **16.21.1000** and above.
+ - ConnectX-5 Ex: **16.21.1000** and above.
While these libraries and kernel modules are available on OpenFabrics
Alliance's `website <https://www.openfabrics.org/>`__ and provided by package
@@ -373,8 +415,8 @@ Supported NICs
* Mellanox(R) ConnectX(R)-5 100G MCX556A-ECAT (2x100G)
* Mellanox(R) ConnectX(R)-5 Ex EN 100G MCX516A-CDAT (2x100G)
-Quick Start Guide
------------------
+Quick Start Guide on OFED
+-------------------------
1. Download latest Mellanox OFED. For more info check the `prerequisites`_.
@@ -384,7 +426,7 @@ Quick Start Guide
.. code-block:: console
- ./mlnxofedinstall
+ ./mlnxofedinstall --upstream-libs --dpdk
3. Verify the firmware is the correct one:
diff --git a/doc/guides/nics/mrvl.rst b/doc/guides/nics/mrvl.rst
new file mode 100644
index 00000000..fbfdf478
--- /dev/null
+++ b/doc/guides/nics/mrvl.rst
@@ -0,0 +1,253 @@
+.. BSD LICENSE
+ Copyright(c) 2017 Marvell International Ltd.
+ Copyright(c) 2017 Semihalf.
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+ * Neither the name of the copyright holder nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+MRVL Poll Mode Driver
+======================
+
+The MRVL PMD (librte_pmd_mrvl) provides poll mode driver support
+for the Marvell PPv2 (Packet Processor v2) 1/10 Gbps adapter.
+
+Detailed information about SoCs that use PPv2 can be obtained here:
+
+* https://www.marvell.com/embedded-processors/armada-70xx/
+* https://www.marvell.com/embedded-processors/armada-80xx/
+
+.. Note::
+
+ Due to external dependencies, this driver is disabled by default. It must
+ be enabled manually by setting relevant configuration option manually.
+ Please refer to `Config File Options`_ section for further details.
+
+
+Features
+--------
+
+Features of the MRVL PMD are:
+
+- Speed capabilities
+- Link status
+- Queue start/stop
+- MTU update
+- Jumbo frame
+- Promiscuous mode
+- Allmulticast mode
+- Unicast MAC filter
+- Multicast MAC filter
+- RSS hash
+- VLAN filter
+- CRC offload
+- L3 checksum offload
+- L4 checksum offload
+- Packet type parsing
+- Basic stats
+- QoS
+
+
+Limitations
+-----------
+
+- Number of lcores is limited to 9 by MUSDK internal design. If more lcores
+ need to be allocated, locking will have to be considered. Number of available
+ lcores can be changed via ``MRVL_MUSDK_HIFS_RESERVED`` define in
+ ``mrvl_ethdev.c`` source file.
+
+- Flushing vlans added for filtering is not possible due to MUSDK missing
+ functionality. Current workaround is to reset board so that PPv2 has a
+ chance to start in a sane state.
+
+
+Prerequisites
+-------------
+
+- Custom Linux Kernel sources available
+ `here <https://github.com/MarvellEmbeddedProcessors/linux-marvell/tree/linux-4.4.52-armada-17.08>`__.
+
+- Out of tree `mvpp2x_sysfs` kernel module sources available
+ `here <https://github.com/MarvellEmbeddedProcessors/mvpp2x-marvell/tree/mvpp2x-armada-17.08>`__.
+
+- MUSDK (Marvell User-Space SDK) sources available
+ `here <https://github.com/MarvellEmbeddedProcessors/musdk-marvell/tree/musdk-armada-17.08>`__.
+
+ MUSDK is a light-weight library that provides direct access to Marvell's
+ PPv2 (Packet Processor v2). Alternatively prebuilt MUSDK library can be
+ requested from `Marvell Extranet <https://extranet.marvell.com>`_. Once
+ approval has been granted, library can be found by typing ``musdk`` in
+ the search box.
+
+ MUSDK must be configured with the following features:
+
+ .. code-block:: console
+
+ --enable-bpool-dma=64
+
+- DPDK environment
+
+ Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup
+ DPDK environment.
+
+
+Config File Options
+-------------------
+
+The following options can be modified in the ``config`` file.
+
+- ``CONFIG_RTE_LIBRTE_MRVL_PMD`` (default ``n``)
+
+ Toggle compilation of the librte_pmd_mrvl driver.
+
+- ``CONFIG_RTE_MRVL_MUSDK_DMA_MEMSIZE`` (default ``41943040``)
+
+ Size in bytes of the contiguous memory region that MUSDK will allocate
+ for run-time DMA-able data buffers.
+
+
+QoS Configuration
+-----------------
+
+QoS configuration is done through external configuration file. Path to the
+file must be given as `cfg` in driver's vdev parameter list.
+
+Configuration syntax
+~~~~~~~~~~~~~~~~~~~~
+
+.. code-block:: console
+
+ [port <portnum> default]
+ default_tc = <default_tc>
+ qos_mode = <qos_priority>
+
+ [port <portnum> tc <traffic_class>]
+ rxq = <rx_queue_list>
+ pcp = <pcp_list>
+ dscp = <dscp_list>
+
+ [port <portnum> tc <traffic_class>]
+ rxq = <rx_queue_list>
+ pcp = <pcp_list>
+ dscp = <dscp_list>
+
+Where:
+
+- ``<portnum>``: DPDK Port number (0..n).
+
+- ``<default_tc>``: Default traffic class (e.g. 0)
+
+- ``<qos_priority>``: QoS priority for mapping (`ip`, `vlan`, `ip/vlan` or `vlan/ip`).
+
+- ``<traffic_class>``: Traffic Class to be configured.
+
+- ``<rx_queue_list>``: List of DPDK RX queues (e.g. 0 1 3-4)
+
+- ``<pcp_list>``: List of PCP values to handle in particular TC (e.g. 0 1 3-4 7).
+
+- ``<dscp_list>``: List of DSCP values to handle in particular TC (e.g. 0-12 32-48 63).
+
+Setting PCP/DSCP values for the default TC is not required. All PCP/DSCP
+values not assigned explicitly to particular TC will be handled by the
+default TC.
+
+Configuration file example
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. code-block:: console
+
+ [port 0 default]
+ default_tc = 0
+ qos_mode = ip
+
+ [port 0 tc 0]
+ rxq = 0 1
+
+ [port 0 tc 1]
+ rxq = 2
+ pcp = 5 6 7
+ dscp = 26-38
+
+ [port 1 default]
+ default_tc = 0
+ qos_mode = vlan/ip
+
+ [port 1 tc 0]
+ rxq = 0
+
+ [port 1 tc 1]
+ rxq = 1 2
+ pcp = 5 6 7
+ dscp = 26-38
+
+Usage example
+^^^^^^^^^^^^^
+
+.. code-block:: console
+
+ ./testpmd --vdev=eth_mrvl,iface=eth0,iface=eth2,cfg=/home/user/mrvl.conf \
+ -c 7 -- -i -a --disable-hw-vlan-strip --rxq=2
+
+
+Building DPDK
+-------------
+
+Driver needs precompiled MUSDK library during compilation. Please consult
+``doc/musdk_get_started.txt`` for the detailed build instructions.
+
+Before the DPDK build process the environmental variable ``LIBMUSDK_PATH`` with
+the path to the MUSDK installation directory needs to be exported.
+
+
+Usage Example
+-------------
+
+MRVL PMD requires extra out of tree kernel modules to function properly.
+`musdk_uio` and `mv_pp_uio` sources are part of the MUSDK. Please consult
+``doc/musdk_get_started.txt`` for the detailed build instructions.
+For `mvpp2x_sysfs` please consult ``Documentation/pp22_sysfs.txt`` for the
+detailed build instructions.
+
+.. code-block:: console
+
+ insmod musdk_uio.ko
+ insmod mv_pp_uio.ko
+ insmod mvpp2x_sysfs.ko
+
+Additionally interfaces used by DPDK application need to be put up:
+
+.. code-block:: console
+
+ ip link set eth0 up
+ ip link set eth1 up
+
+In order to run testpmd example application following command can be used:
+
+.. code-block:: console
+
+ ./testpmd --vdev=eth_mrvl,iface=eth0,iface=eth2 -c 7 -- \
+ --burst=128 --txd=2048 --rxd=1024 --rxq=2 --txq=2 --nb-cores=2 \
+ -i -a --disable-hw-vlan-strip --rss-udp
diff --git a/doc/guides/nics/nfp.rst b/doc/guides/nics/nfp.rst
index c732fb1f..99a3b76e 100644
--- a/doc/guides/nics/nfp.rst
+++ b/doc/guides/nics/nfp.rst
@@ -1,5 +1,5 @@
.. BSD LICENSE
- Copyright(c) 2015 Netronome Systems, Inc. All rights reserved.
+ Copyright(c) 2015-2017 Netronome Systems, Inc. All rights reserved.
All rights reserved.
Redistribution and use in source and binary forms, with or without
@@ -38,31 +38,32 @@ up to 400 Gbps.
This document explains how to use DPDK with the Netronome Poll Mode
Driver (PMD) supporting Netronome's Network Flow Processor 6xxx
-(NFP-6xxx).
+(NFP-6xxx) and Netronome's Flow Processor 4xxx (NFP-4xxx).
-Currently the driver supports virtual functions (VFs) only.
+NFP is a SRIOV capable device and the PMD driver supports the physical
+function (PF) and virtual functions (VFs).
Dependencies
------------
-Before using the Netronome's DPDK PMD some NFP-6xxx configuration,
+Before using the Netronome's DPDK PMD some NFP configuration,
which is not related to DPDK, is required. The system requires
-installation of **Netronome's BSP (Board Support Package)** which includes
-Linux drivers, programs and libraries.
+installation of **Netronome's BSP (Board Support Package)** along
+with some specific NFP firmware application. Netronome's NSP ABI
+version should be 0.20 or higher.
-If you have a NFP-6xxx device you should already have the code and
-documentation for doing this configuration. Contact
+If you have a NFP device you should already have the code and
+documentation for doing all this configuration. Contact
**support@netronome.com** to obtain the latest available firmware.
-The NFP Linux kernel drivers (including the required PF driver for the
-NFP) are available on Github at
+The NFP Linux netdev kernel driver for VFs is part of vanilla kernel
+since kernel version 4.5, and support for the PF since kernel version
+4.11. Support for older kernels can be obtained on Github at
**https://github.com/Netronome/nfp-drv-kmods** along with build
instructions.
-DPDK runs in userspace and PMDs uses the Linux kernel UIO interface to
-allow access to physical devices from userspace. The NFP PMD requires
-the **igb_uio** UIO driver, available with DPDK, to perform correct
-initialization.
+NFP PMD needs to be used along with UIO ``igb_uio`` or VFIO (``vfio-pci``)
+Linux kernel driver.
Building the software
---------------------
@@ -71,7 +72,7 @@ Netronome's PMD code is provided in the **drivers/net/nfp** directory.
Although NFP PMD has Netronome´s BSP dependencies, it is possible to
compile it along with other DPDK PMDs even if no BSP was installed before.
Of course, a DPDK app will require such a BSP installed for using the
-NFP PMD.
+NFP PMD, along with a specific NFP firmware application.
Default PMD configuration is at **common_linuxapp configuration** file:
@@ -87,14 +88,53 @@ Driver compilation and testing
Refer to the document :ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>`
for details.
+Using the PF
+------------
+
+NFP PMD has support for using the NFP PF as another DPDK port, but it does not
+have any functionality for controlling VFs. In fact, it is not possible to use
+the PMD with the VFs if the PF is being used by DPDK, that is, with the NFP PF
+bound to ``igb_uio`` or ``vfio-pci`` kernel drivers. Future DPDK version will
+have a PMD able to work with the PF and VFs at the same time and with the PF
+implementing VF management along with other PF-only functionalities/offloads.
+
+The PMD PF has extra work to do which will delay the DPDK app initialization
+like checking if a firmware is already available in the device, uploading the
+firmware if necessary, and configure the Link state properly when starting or
+stopping a PF port. Note that firmware upload is not always necessary which is
+the main delay for NFP PF PMD initialization.
+
+Depending on the Netronome product installed in the system, firmware files
+should be available under ``/lib/firmware/netronome``. DPDK PMD supporting the
+PF requires a specific link, ``/lib/firmware/netronome/nic_dpdk_default.nffw``,
+which should be created automatically with Netronome's Agilio products
+installation.
+
+PF multiport support
+--------------------
+
+Some NFP cards support several physical ports with just one single PCI device.
+DPDK core is designed with the 1:1 relationship between PCI devices and DPDK
+ports, so NFP PMD PF support requires handling the multiport case specifically.
+During NFP PF initialization, the PMD will extract the information about the
+number of PF ports from the firmware and will create as many DPDK ports as
+needed.
+
+Because the unusual relationship between a single PCI device and several DPDK
+ports, there are some limitations when using more than one PF DPDK ports: there
+is no support for RX interrupts and it is not possible either to use those PF
+ports with the device hotplug functionality.
+
System configuration
--------------------
-#. **Enable SR-IOV on the NFP-6xxx device:** The current NFP PMD works with
- Virtual Functions (VFs) on a NFP device. Make sure that one of the Physical
- Function (PF) drivers from the above Github repository is installed and
- loaded.
+#. **Enable SR-IOV on the NFP device:** The current NFP PMD supports the PF and
+ the VFs on a NFP device. However, it is not possible to work with both at the
+ same time because the VFs require the PF being bound to the NFP PF Linux
+ netdev driver. Make sure you are working with a kernel with NFP PF support or
+ get the drivers from the above Github repository and follow the instructions
+ for building and installing it.
Virtual Functions need to be enabled before they can be used with the PMD.
Before enabling the VFs it is useful to obtain information about the
diff --git a/doc/guides/nics/octeontx.rst b/doc/guides/nics/octeontx.rst
new file mode 100644
index 00000000..a6631cd0
--- /dev/null
+++ b/doc/guides/nics/octeontx.rst
@@ -0,0 +1,252 @@
+.. BSD LICENSE
+ Copyright (C) Cavium, Inc. 2017.
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+ * Neither the name of Cavium, Inc nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+OCTEONTX Poll Mode driver
+=========================
+
+The OCTEONTX ETHDEV PMD (**librte_pmd_octeontx**) provides poll mode ethdev
+driver support for the inbuilt network device found in the **Cavium OCTEONTX**
+SoC family as well as their virtual functions (VF) in SR-IOV context.
+
+More information can be found at `Cavium, Inc Official Website
+<http://www.cavium.com/OCTEON-TX_ARM_Processors.html>`_.
+
+Features
+--------
+
+Features of the OCTEONTX Ethdev PMD are:
+
+- Packet type information
+- Promiscuous mode
+- Port hardware statistics
+- Jumbo frames
+- Link state information
+- SR-IOV VF
+- Multiple queues for TX
+- Lock-free Tx queue
+- HW offloaded `ethdev Rx queue` to `eventdev event queue` packet injection
+
+Supported OCTEONTX SoCs
+-----------------------
+
+- CN83xx
+
+Unsupported features
+--------------------
+
+The features supported by the device and not yet supported by this PMD include:
+
+- Receive Side Scaling (RSS)
+- Scattered and gather for TX and RX
+- Ingress classification support
+- Egress hierarchical scheduling, traffic shaping, and marking
+
+Prerequisites
+-------------
+
+There are three main pre-perquisites for executing OCTEONTX PMD on a OCTEONTX
+compatible board:
+
+1. **OCTEONTX Linux kernel PF driver for Network acceleration HW blocks**
+
+ The OCTEONTX Linux kernel drivers (including the required PF driver for the
+ all network acceleration blocks) are available on GitHub at
+ `octeontx-kmod <https://github.com/caviumnetworks/octeontx-kmod>`_
+ along with build, install and dpdk usage instructions.
+
+2. **ARM64 Tool Chain**
+
+ For example, the *aarch64* Linaro Toolchain, which can be obtained from
+ `here <https://releases.linaro.org/components/toolchain/binaries/4.9-2017.01/aarch64-linux-gnu>`_.
+
+3. **Rootfile system**
+
+ Any *aarch64* supporting filesystem can be used. For example,
+ Ubuntu 15.10 (Wily) or 16.04 LTS (Xenial) userland which can be obtained
+ from `<http://cdimage.ubuntu.com/ubuntu-base/releases/16.04/release/ubuntu-base-16.04.1-base-arm64.tar.gz>`_.
+
+ As an alternative method, OCTEONTX PMD can also be executed using images provided
+ as part of SDK from Cavium. The SDK includes all the above prerequisites necessary
+ to bring up a OCTEONTX board.
+
+ SDK and related information can be obtained from: `Cavium support site <https://support.cavium.com/>`_.
+
+Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup the basic DPDK environment.
+
+Pre-Installation Configuration
+------------------------------
+
+Config File Options
+~~~~~~~~~~~~~~~~~~~
+
+The following options can be modified in the ``config`` file.
+Please note that enabling debugging options may affect system performance.
+
+- ``CONFIG_RTE_LIBRTE_OCTEONTX_PMD`` (default ``y``)
+
+ Toggle compilation of the ``librte_pmd_octeontx`` driver.
+
+- ``CONFIG_RTE_LIBRTE_OCTEONTX_DEBUG_DRIVER`` (default ``n``)
+
+ Toggle display of generic debugging messages
+
+- ``CONFIG_RTE_LIBRTE_OCTEONTX_DEBUG_INIT`` (default ``n``)
+
+ Toggle display of initialization related messages.
+
+- ``CONFIG_RTE_LIBRTE_OCTEONTX_DEBUG_RX`` (default ``n``)
+
+ Toggle display of receive path message
+
+- ``CONFIG_RTE_LIBRTE_OCTEONTX_DEBUG_TX`` (default ``n``)
+
+ Toggle display of transmit path message
+
+- ``CONFIG_RTE_LIBRTE_OCTEONTX_DEBUG_MBOX`` (default ``n``)
+
+ Toggle display of mbox related message
+
+
+Driver compilation and testing
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Refer to the document :ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>`
+for details.
+
+To compile the OCTEONTX PMD for Linux arm64 gcc target, run the
+following ``make`` command:
+
+.. code-block:: console
+
+ cd <DPDK-source-directory>
+ make config T=arm64-thunderx-linuxapp-gcc install
+
+#. Running testpmd:
+
+ Follow instructions available in the document
+ :ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>`
+ to run testpmd.
+
+ Example output:
+
+ .. code-block:: console
+
+ ./arm64-thunderx-linuxapp-gcc/app/testpmd -c 700 \
+ --base-virtaddr=0x100000000000 \
+ --mbuf-pool-ops-name="octeontx_fpavf" \
+ --vdev='event_octeontx' \
+ --vdev='eth_octeontx,nr_port=2' \
+ -- --rxq=1 --txq=1 --nb-core=2 --total-num-mbufs=16384 \
+ --disable-hw-vlan-filter -i
+ .....
+ EAL: Detected 24 lcore(s)
+ EAL: Probing VFIO support...
+ EAL: VFIO support initialized
+ .....
+ EAL: PCI device 0000:07:00.1 on NUMA socket 0
+ EAL: probe driver: 177d:a04b octeontx_ssovf
+ .....
+ EAL: PCI device 0001:02:00.7 on NUMA socket 0
+ EAL: probe driver: 177d:a0dd octeontx_pkivf
+ .....
+ EAL: PCI device 0001:03:01.0 on NUMA socket 0
+ EAL: probe driver: 177d:a049 octeontx_pkovf
+ .....
+ PMD: octeontx_probe(): created ethdev eth_octeontx for port 0
+ PMD: octeontx_probe(): created ethdev eth_octeontx for port 1
+ .....
+ Configuring Port 0 (socket 0)
+ Port 0: 00:0F:B7:11:94:46
+ Configuring Port 1 (socket 0)
+ Port 1: 00:0F:B7:11:94:47
+ .....
+ Checking link statuses...
+ Port 0 Link Up - speed 40000 Mbps - full-duplex
+ Port 1 Link Up - speed 40000 Mbps - full-duplex
+ Done
+ testpmd>
+
+
+Initialization
+--------------
+
+The octeontx ethdev pmd is exposed as a vdev device which consists of a set
+of PKI and PKO PCIe VF devices. On EAL initialization,
+PKI/PKO PCIe VF devices will be probed and then the vdev device can be created
+from the application code, or from the EAL command line based on
+the number of probed/bound PKI/PKO PCIe VF device to DPDK by
+
+* Invoking ``rte_vdev_init("eth_octeontx")`` from the application
+
+* Using ``--vdev="eth_octeontx"`` in the EAL options, which will call
+ rte_vdev_init() internally
+
+Device arguments
+~~~~~~~~~~~~~~~~
+Each ethdev port is mapped to a physical port(LMAC), Application can specify
+the number of interesting ports with ``nr_ports`` argument.
+
+Dependency
+~~~~~~~~~~
+``eth_octeontx`` pmd is depend on ``event_octeontx`` eventdev device and
+``octeontx_fpavf`` external mempool handler.
+
+Example:
+
+.. code-block:: console
+
+ ./your_dpdk_application --mbuf-pool-ops="octeontx_fpavf" \
+ --vdev='event_octeontx' \
+ --vdev="eth_octeontx,nr_port=2"
+
+Limitations
+-----------
+
+``octeontx_fpavf`` external mempool handler dependency
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The OCTEONTX SoC family NIC has inbuilt HW assisted external mempool manager.
+This driver will only work with ``octeontx_fpavf`` external mempool handler
+as it is the most performance effective way for packet allocation and Tx buffer
+recycling on OCTEONTX SoC platform.
+
+CRC striping
+~~~~~~~~~~~~
+
+The OCTEONTX SoC family NICs strip the CRC for every packets coming into the
+host interface. So, CRC will be stripped even when the
+``rxmode.hw_strip_crc`` member is set to 0 in ``struct rte_eth_conf``.
+
+Maximum packet length
+~~~~~~~~~~~~~~~~~~~~~
+
+The OCTEONTX SoC family NICs support a maximum of a 32K jumbo frame. The value
+is fixed and cannot be changed. So, even when the ``rxmode.max_rx_pkt_len``
+member of ``struct rte_eth_conf`` is set to a value lower than 32k, frames
+up to 32k bytes can still reach the host interface.
diff --git a/doc/guides/nics/sfc_efx.rst b/doc/guides/nics/sfc_efx.rst
index 7761989c..ae2b54a2 100644
--- a/doc/guides/nics/sfc_efx.rst
+++ b/doc/guides/nics/sfc_efx.rst
@@ -148,6 +148,8 @@ Supported actions:
- QUEUE
+- RSS
+
Validating flow rules depends on the firmware variant.
Ethernet destinaton individual/group match
@@ -243,12 +245,16 @@ boolean parameters value.
features available and required by the datapath implementation.
**efx** chooses libefx-based datapath which supports VLAN insertion
(full-feature firmware variant only), TSO and multi-segment mbufs.
+ Mbuf segments may come from different mempools, and mbuf reference
+ counters are treated responsibly.
**ef10** chooses EF10 (SFN7xxx, SFN8xxx) native datapath which is
more efficient than libefx-based but has no VLAN insertion and TSO
support yet.
+ Mbuf segments may come from different mempools, and mbuf reference
+ counters are treated responsibly.
**ef10_simple** chooses EF10 (SFN7xxx, SFN8xxx) native datapath which
is even more faster then **ef10** but does not support multi-segment
- mbufs.
+ mbufs, disallows multiple mempools and neglects mbuf reference counters.
- ``perf_profile`` [auto|throughput|low-latency] (default **throughput**)
diff --git a/doc/guides/nics/tap.rst b/doc/guides/nics/tap.rst
index f3ee95d2..04086b11 100644
--- a/doc/guides/nics/tap.rst
+++ b/doc/guides/nics/tap.rst
@@ -113,7 +113,14 @@ Flow API support
----------------
The tap PMD supports major flow API pattern items and actions, when running on
-linux kernels above 4.2 ("Flower" classifier required). Supported items:
+linux kernels above 4.2 ("Flower" classifier required).
+The kernel support can be checked with this command::
+
+ zcat /proc/config.gz | ( grep 'CLS_FLOWER=' || echo 'not supported' ) |
+ tee -a /dev/stderr | grep -q '=m' &&
+ lsmod | ( grep cls_flower || echo 'try modprobe cls_flower' )
+
+Supported items:
- eth: src and dst (with variable masks), and eth_type (0xffff mask).
- vlan: vid, pcp, tpid, but not eid. (requires kernel 4.9)
diff --git a/doc/guides/nics/vhost.rst b/doc/guides/nics/vhost.rst
index e651a166..4f7ae899 100644
--- a/doc/guides/nics/vhost.rst
+++ b/doc/guides/nics/vhost.rst
@@ -66,6 +66,11 @@ The user can specify below arguments in `--vdev` option.
It is used to specify the number of queues virtio-net device has.
(Default: 1)
+#. ``iommu-support``:
+
+ It is used to enable iommu support in vhost library.
+ (Default: 0 (disabled))
+
Vhost PMD event handling
------------------------
diff --git a/doc/guides/nics/virtio.rst b/doc/guides/nics/virtio.rst
index 4d6a8376..af82f86e 100644
--- a/doc/guides/nics/virtio.rst
+++ b/doc/guides/nics/virtio.rst
@@ -291,6 +291,13 @@ interrupt, Rx interrupts, and Tx interrupts. Config interrupt is used for
notification of device configuration changes, especially link status (lsc).
Interrupt mode is translated into Rx interrupts in the context of DPDK.
+.. Note::
+
+ Virtio PMD already has support for receiving lsc from qemu when the link
+ status changes, especially when vhost user disconnects. However, it fails
+ to do that if the VM is created by qemu 2.6.2 or below, since the
+ capability to detect vhost user disconnection is introduced in qemu 2.7.0.
+
Prerequisites for Rx interrupts
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~