Imported Upstream version 16.11

Change-Id: I1944c65ddc88a9ad70f8c0eb6731552b84fbcb77
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>

1 files changed, 0 insertions, 160 deletions

diff --git a/doc/guides/prog_guide/ivshmem_lib.rst b/doc/guides/prog_guide/ivshmem_lib.rst
deleted file mode 100644
index b8a32e4c..00000000
--- a/doc/guides/prog_guide/ivshmem_lib.rst
+++ /dev/null
@@ -1,160 +0,0 @@
-..  BSD LICENSE
-    Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
-    All rights reserved.
-
-    Redistribution and use in source and binary forms, with or without
-    modification, are permitted provided that the following conditions
-    are met:
-
-    * Redistributions of source code must retain the above copyright
-    notice, this list of conditions and the following disclaimer.
-    * Redistributions in binary form must reproduce the above copyright
-    notice, this list of conditions and the following disclaimer in
-    the documentation and/or other materials provided with the
-    distribution.
-    * Neither the name of Intel Corporation nor the names of its
-    contributors may be used to endorse or promote products derived
-    from this software without specific prior written permission.
-
-    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-    "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-    LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-    A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-    OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-    SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-    LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-    DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-    THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-    OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-IVSHMEM Library
-===============
-
-The DPDK IVSHMEM library facilitates fast zero-copy data sharing among virtual machines
-(host-to-guest or guest-to-guest) by means of QEMU's IVSHMEM mechanism.
-
-The library works by providing a command line for QEMU to map several hugepages into a single IVSHMEM device.
-For the guest to know what is inside any given IVSHMEM device
-(and to distinguish between DPDK and non-DPDK IVSHMEM devices),
-a metadata file is also mapped into the IVSHMEM segment.
-No work needs to be done by the guest application to map IVSHMEM devices into memory;
-they are automatically recognized by the DPDK Environment Abstraction Layer (EAL).
-
-A typical DPDK IVSHMEM use case looks like the following.
-
-
-.. figure:: img/ivshmem.*
-
-   Typical Ivshmem use case
-
-
-The same could work with several virtual machines, providing host-to-VM or VM-to-VM communication.
-The maximum number of metadata files is 32 (by default) and each metadata file can contain different (or even the same) hugepages.
-The only constraint is that each VM has to have access to the memory it is sharing with other entities (be it host or another VM).
-For example, if the user wants to share the same memzone across two VMs, each VM must have that memzone in its metadata file.
-
-IVHSHMEM Library API Overview
------------------------------
-
-The following is a simple guide to using the IVSHMEM Library API:
-
-*   Call rte_ivshmem_metadata_create() to create a new metadata file.
-    The metadata name is used to distinguish between multiple metadata files.
-
-*   Populate each metadata file with DPDK data structures.
-    This can be done using the following API calls:
-
-    *   rte_ivhshmem_metadata_add_memzone() to add rte_memzone to metadata file
-
-    *   rte_ivshmem_metadata_add_ring() to add rte_ring to metadata file
-
-    *   rte_ivshmem_metadata_add_mempool() to add rte_mempool to metadata file
-
-*   Finally, call rte_ivshmem_metadata_cmdline_generate() to generate the command line for QEMU.
-    Multiple metadata files (and thus multiple command lines) can be supplied to a single VM.
-
-.. note::
-
-    Only data structures fully residing in DPDK hugepage memory work correctly.
-    Supported data structures created by malloc(), mmap()
-    or otherwise using non-DPDK memory cause undefined behavior and even a segmentation fault.
-    Specifically, because the memzone field in an rte_ring refers to a memzone structure residing in local memory,
-    accessing the memzone field in a shared rte_ring will cause an immediate segmentation fault.
-
-IVSHMEM Environment Configuration
----------------------------------
-
-The steps needed to successfully run IVSHMEM applications are the following:
-
-*   Compile a special version of QEMU from sources.
-
-    The source code can be found on the QEMU website (currently, version 1.4.x is supported, but version 1.5.x is known to work also),
-    however, the source code will need to be patched to support using regular files as the IVSHMEM memory backend.
-    The patch is not included in the DPDK package,
-    but is available on the `Intel®DPDK-vswitch project webpage <https://01.org/packet-processing/intel%C2%AE-ovdk>`_
-    (either separately or in a DPDK vSwitch package).
-
-*   Enable IVSHMEM library in the DPDK build configuration.
-
-    In the default configuration, IVSHMEM library is not compiled. To compile the IVSHMEM library,
-    one has to either use one of the provided IVSHMEM targets
-    (for example, x86_64-ivshmem-linuxapp-gcc),
-    or set CONFIG_RTE_LIBRTE_IVSHMEM to "y" in the build configuration.
-
-*   Set up hugepage memory on the virtual machine.
-
-    The guest applications run as regular DPDK (primary) processes and thus need their own hugepage memory set up inside the VM.
-    The process is identical to the one described in the *DPDK Getting Started Guide*.
-
-Best Practices for Writing IVSHMEM Applications
------------------------------------------------
-
-When considering the use of IVSHMEM for sharing memory, security implications need to be carefully evaluated.
-IVSHMEM is not suitable for untrusted guests, as IVSHMEM is essentially a window into the host process memory.
-This also has implications for the multiple VM scenarios.
-While the IVSHMEM library tries to share as little memory as possible,
-it is quite probable that data designated for one VM might also be present in an IVSMHMEM device designated for another VM.
-Consequently, any shared memory corruption will affect both host and all VMs sharing that particular memory.
-
-IVSHMEM applications essentially behave like multi-process applications,
-so it is important to implement access serialization to data and thread safety.
-DPDK ring structures are already thread-safe, however,
-any custom data structures that the user might need would have to be thread-safe also.
-
-Similar to regular DPDK multi-process applications,
-it is not recommended to use function pointers as functions might have different memory addresses in different processes.
-
-It is best to avoid freeing the rte_mbuf structure on a different machine from where it was allocated,
-that is, if the mbuf was allocated on the host, the host should free it.
-Consequently, any packet transmission and reception should also happen on the same machine (whether virtual or physical).
-Failing to do so may lead to data corruption in the mempool cache.
-
-Despite the IVSHMEM mechanism being zero-copy and having good performance,
-it is still desirable to do processing in batches and follow other procedures described in
-:ref:`Performance Optimization <Performance_Optimization>`.
-
-Best Practices for Running IVSHMEM Applications
------------------------------------------------
-
-For performance reasons,
-it is best to pin host processes and QEMU processes to different cores so that they do not interfere with each other.
-If NUMA support is enabled, it is also desirable to keep host process' hugepage memory and QEMU process on the same NUMA node.
-
-For the best performance across all NUMA nodes, each QEMU core should be pinned to host CPU core on the appropriate NUMA node.
-QEMU's virtual NUMA nodes should also be set up to correspond to physical NUMA nodes.
-More on how to set up DPDK and QEMU NUMA support can be found in *DPDK Getting Started Guide* and
-`QEMU documentation <http://qemu.weilnetz.de/qemu-doc.html>`_ respectively.
-A script called cpu_layout.py is provided with the DPDK package (in the tools directory)
-that can be used to identify which CPU cores correspond to which NUMA node.
-
-The QEMU IVSHMEM command line creation should be considered the last step before starting the virtual machine.
-Currently, there is no hot plug support for QEMU IVSHMEM devices,
-so one cannot add additional memory to an IVSHMEM device once it has been created.
-Therefore, the correct sequence to run an IVSHMEM application is to run host application first,
-obtain the command lines for each IVSHMEM device and then run all QEMU instances with guest applications afterwards.
-
-It is important to note that once QEMU is started, it holds on to the hugepages it uses for IVSHMEM devices.
-As a result, if the user wishes to shut down or restart the IVSHMEM host application,
-it is not enough to simply shut the application down.
-The virtual machine must also be shut down (if not, it will hold onto outdated host data).