diff options
author | 2017-05-16 14:51:32 +0200 | |
---|---|---|
committer | 2017-05-16 16:20:45 +0200 | |
commit | 7595afa4d30097c1177b69257118d8ad89a539be (patch) | |
tree | 4bfeadc905c977e45e54a90c42330553b8942e4e /doc/guides/rel_notes/release_17_02.rst | |
parent | ce3d555e43e3795b5d9507fcfc76b7a0a92fd0d6 (diff) |
Imported Upstream version 17.05
Change-Id: Id1e419c5a214e4a18739663b91f0f9a549f1fdc6
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Diffstat (limited to 'doc/guides/rel_notes/release_17_02.rst')
-rw-r--r-- | doc/guides/rel_notes/release_17_02.rst | 692 |
1 files changed, 692 insertions, 0 deletions
diff --git a/doc/guides/rel_notes/release_17_02.rst b/doc/guides/rel_notes/release_17_02.rst new file mode 100644 index 00000000..357965ac --- /dev/null +++ b/doc/guides/rel_notes/release_17_02.rst @@ -0,0 +1,692 @@ +DPDK Release 17.02 +================== + +.. **Read this first.** + + The text below explains how to update the release notes. + + Use proper spelling, capitalization and punctuation in all sections. + + Variable and config names should be quoted as fixed width text: ``LIKE_THIS``. + + Build the docs and view the output file to ensure the changes are correct:: + + make doc-guides-html + + firefox build/doc/html/guides/rel_notes/release_17_02.html + + +New Features +------------ + +.. This section should contain new features added in this release. Sample format: + + * **Add a title in the past tense with a full stop.** + + Add a short 1-2 sentence description in the past tense. The description + should be enough to allow someone scanning the release notes to understand + the new feature. + + If the feature adds a lot of sub-features you can use a bullet list like this. + + * Added feature foo to do something. + * Enhanced feature bar to do something else. + + Refer to the previous release notes for examples. + + This section is a comment. do not overwrite or remove it. + Also, make sure to start the actual text at the margin. + ========================================================= + +* **Added support for representing buses in EAL** + + The ``rte_bus`` structure was introduced into the EAL. This allows for + devices to be represented by buses they are connected to. A new bus can be + added to DPDK by extending the ``rte_bus`` structure and implementing the + scan and probe functions. Once a new bus is registered using the provided + APIs, new devices can be detected and initialized using bus scan and probe + callbacks. + + With this change, devices other than PCI or VDEV type can be represented + in the DPDK framework. + +* **Added generic EAL API for I/O device memory read/write operations.** + + This API introduces 8 bit, 16 bit, 32 bit and 64 bit I/O device + memory read/write operations along with "relaxed" versions. + + Weakly-ordered architectures like ARM need an additional I/O barrier for + device memory read/write access over PCI bus. By introducing the EAL + abstraction for I/O device memory read/write access, the drivers can access + I/O device memory in an architecture-agnostic manner. The relaxed version + does not have an additional I/O memory barrier, which is useful in accessing + the device registers of integrated controllers which is implicitly strongly + ordered with respect to memory access. + +* **Added generic flow API (rte_flow).** + + This API provides a generic means to configure hardware to match specific + ingress or egress traffic, alter its behavior and query related counters + according to any number of user-defined rules. + + In order to expose a single interface with an unambiguous behavior that is + common to all poll-mode drivers (PMDs) the ``rte_flow`` API is slightly + higher-level than the legacy filtering framework, which it encompasses and + supersedes (including all functions and filter types) . + + See the :ref:`Generic flow API <Generic_flow_API>` documentation for more + information. + +* **Added firmware version get API.** + + Added a new function ``rte_eth_dev_fw_version_get()`` to fetch the firmware + version for a given device. + +* **Added APIs for MACsec offload support to the ixgbe PMD.** + + Six new APIs have been added to the ixgbe PMD for MACsec offload support. + The declarations for the APIs can be found in ``rte_pmd_ixgbe.h``. + +* **Added I219 NICs support.** + + Added support for I219 Intel 1GbE NICs. + +* **Added VF Daemon (VFD) for i40e. - EXPERIMENTAL** + + This is an EXPERIMENTAL feature to enhance the capability of the DPDK PF as + many VF management features are not currently supported by the kernel PF + driver. Some new private APIs are implemented directly in the PMD without an + abstraction layer. They can be used directly by some users who have the + need. + + The new APIs to control VFs directly from PF include: + + * Set VF MAC anti-spoofing. + * Set VF VLAN anti-spoofing. + * Set TX loopback. + * Set VF unicast promiscuous mode. + * Set VF multicast promiscuous mode. + * Set VF MTU. + * Get/reset VF stats. + * Set VF MAC address. + * Set VF VLAN stripping. + * Vf VLAN insertion. + * Set VF broadcast mode. + * Set VF VLAN tag. + * Set VF VLAN filter. + + VFD also includes VF to PF mailbox message management from an application. + When the PF receives mailbox messages from the VF the PF should call the + callback provided by the application to know if they're permitted to be + processed. + + As an EXPERIMENTAL feature, please be aware it can be changed or even + removed without prior notice. + +* **Updated the i40e base driver.** + + Updated the i40e base driver, including the following changes: + + * Replace existing legacy ``memcpy()`` calls with ``i40e_memcpy()`` calls. + * Use ``BIT()`` macro instead of bit fields. + * Add clear all WoL filters implementation. + * Add broadcast promiscuous control per VLAN. + * Remove unused ``X722_SUPPORT`` and ``I40E_NDIS_SUPPORT`` macros. + +* **Updated the enic driver.** + + * Set new Rx checksum flags in mbufs to indicate unknown, good or bad checksums. + * Fix set/remove of MAC addresses. Allow up to 64 addresses per device. + * Enable TSO on outer headers. + +* **Added Solarflare libefx-based network PMD.** + + Added a new network PMD which supports Solarflare SFN7xxx and SFN8xxx family + of 10/40 Gbps adapters. + +* **Updated the mlx4 driver.** + + * Addressed a few bugs. + +* **Added support for Mellanox ConnectX-5 adapters (mlx5).** + + Added support for Mellanox ConnectX-5 family of 10/25/40/50/100 Gbps + adapters to the existing mlx5 PMD. + +* **Updated the mlx5 driver.** + + * Improve Tx performance by using vector logic. + * Improve RSS balancing when number of queues is not a power of two. + * Generic flow API support for Ethernet, IPv4, IPv4, UDP, TCP, VLAN and + VXLAN pattern items with DROP and QUEUE actions. + * Support for extended statistics. + * Addressed several data path bugs. + * As of MLNX_OFED 4.0-1.0.1.0, the Toeplitz RSS hash function is not + symmetric anymore for consistency with other PMDs. + +* **virtio-user with vhost-kernel as another exceptional path.** + + Previously, we upstreamed a virtual device, virtio-user with vhost-user as + the backend as a way of enabling IPC (Inter-Process Communication) and user + space container networking. + + Virtio-user with vhost-kernel as the backend is a solution for the exception + path, such as KNI, which exchanges packets with the kernel networking stack. + This solution is very promising in: + + * Maintenance: vhost and vhost-net (kernel) is an upstreamed and extensively + used kernel module. + * Features: vhost-net is designed to be a networking solution, which has + lots of networking related features, like multi-queue, TSO, multi-seg + mbuf, etc. + * Performance: similar to KNI, this solution would use one or more + kthreads to send/receive packets from user space DPDK applications, + which has little impact on user space polling thread (except that + it might enter into kernel space to wake up those kthreads if + necessary). + +* **Added virtio Rx interrupt support.** + + Added a feature to enable Rx interrupt mode for virtio pci net devices as + bound to VFIO (noiommu mode) and driven by virtio PMD. + + With this feature, the virtio PMD can switch between polling mode and + interrupt mode, to achieve best performance, and at the same time save + power. It can work on both legacy and modern virtio devices. In this mode, + each ``rxq`` is mapped with an excluded MSIx interrupt. + + See the :ref:`Virtio Interrupt Mode <virtio_interrupt_mode>` documentation + for more information. + +* **Added ARMv8 crypto PMD.** + + A new crypto PMD has been added, which provides combined mode cryptographic + operations optimized for ARMv8 processors. The driver can be used to enhance + performance in processing chained operations such as cipher + HMAC. + +* **Updated the QAT PMD.** + + The QAT PMD has been updated with additional support for: + + * DES algorithm. + * Scatter-gather list (SGL) support. + +* **Updated the AESNI MB PMD.** + + * The Intel(R) Multi Buffer Crypto for IPsec library used in + AESNI MB PMD has been moved to a new repository, in GitHub. + * Support has been added for single operations (cipher only and + authentication only). + +* **Updated the AES-NI GCM PMD.** + + The AES-NI GCM PMD was migrated from the Multi Buffer library to the ISA-L + library. The migration entailed adding additional support for: + + * GMAC algorithm. + * 256-bit cipher key. + * Session-less mode. + * Out-of place processing + * Scatter-gather support for chained mbufs (only out-of place and destination + mbuf must be contiguous) + +* **Added crypto performance test application.** + + Added a new performance test application for measuring performance + parameters of PMDs available in the crypto tree. + +* **Added Elastic Flow Distributor library (rte_efd).** + + Added a new library which uses perfect hashing to determine a target/value + for a given incoming flow key. + + The library does not store the key itself for lookup operations, and + therefore, lookup performance is not dependent on the key size. Also, the + target/value can be any arbitrary value (8 bits by default). Finally, the + storage requirement is much smaller than a hash-based flow table and + therefore, it can better fit in CPU cache and scale to millions of flow + keys. + + See the :ref:`Elastic Flow Distributor Library <Efd_Library>` documentation in + the Programmers Guide document, for more information. + + +Resolved Issues +--------------- + +.. This section should contain bug fixes added to the relevant sections. Sample format: + + * **code/section Fixed issue in the past tense with a full stop.** + + Add a short 1-2 sentence description of the resolved issue in the past tense. + The title should contain the code/lib section like a commit message. + Add the entries in alphabetic order in the relevant sections below. + + This section is a comment. do not overwrite or remove it. + Also, make sure to start the actual text at the margin. + ========================================================= + +Drivers +~~~~~~~ + +* **net/virtio: Fixed multiple process support.** + + Fixed a few regressions introduced in recent releases that break the virtio + multiple process support. + + +Examples +~~~~~~~~ + +* **examples/ethtool: Fixed crash with non-PCI devices.** + + Fixed issue where querying a non-PCI device was dereferencing non-existent + PCI data resulting in a segmentation fault. + + + +API Changes +----------- + +.. This section should contain API changes. Sample format: + + * Add a short 1-2 sentence description of the API change. Use fixed width + quotes for ``rte_function_names`` or ``rte_struct_names``. Use the past tense. + + This section is a comment. do not overwrite or remove it. + Also, make sure to start the actual text at the margin. + ========================================================= + +* **Moved five APIs for VF management from the ethdev to the ixgbe PMD.** + + The following five APIs for VF management from the PF have been removed from + the ethdev, renamed, and added to the ixgbe PMD:: + + rte_eth_dev_set_vf_rate_limit() + rte_eth_dev_set_vf_rx() + rte_eth_dev_set_vf_rxmode() + rte_eth_dev_set_vf_tx() + rte_eth_dev_set_vf_vlan_filter() + + The API's have been renamed to the following:: + + rte_pmd_ixgbe_set_vf_rate_limit() + rte_pmd_ixgbe_set_vf_rx() + rte_pmd_ixgbe_set_vf_rxmode() + rte_pmd_ixgbe_set_vf_tx() + rte_pmd_ixgbe_set_vf_vlan_filter() + + The declarations for the API’s can be found in ``rte_pmd_ixgbe.h``. + + +ABI Changes +----------- + +.. This section should contain ABI changes. Sample format: + + * Add a short 1-2 sentence description of the ABI change that was announced in + the previous releases and made in this release. Use fixed width quotes for + ``rte_function_names`` or ``rte_struct_names``. Use the past tense. + + This section is a comment. do not overwrite or remove it. + Also, make sure to start the actual text at the margin. + ========================================================= + + + +Shared Library Versions +----------------------- + +.. Update any library version updated in this release and prepend with a ``+`` + sign, like this: + + librte_acl.so.2 + + librte_cfgfile.so.2 + librte_cmdline.so.2 + + This section is a comment. do not overwrite or remove it. + ========================================================= + + +The libraries prepended with a plus sign were incremented in this version. + +.. code-block:: diff + + librte_acl.so.2 + librte_cfgfile.so.2 + librte_cmdline.so.2 + librte_cryptodev.so.2 + librte_distributor.so.1 + librte_eal.so.3 + + librte_ethdev.so.6 + librte_hash.so.2 + librte_ip_frag.so.1 + librte_jobstats.so.1 + librte_kni.so.2 + librte_kvargs.so.1 + librte_lpm.so.2 + librte_mbuf.so.2 + librte_mempool.so.2 + librte_meter.so.1 + librte_net.so.1 + librte_pdump.so.1 + librte_pipeline.so.3 + librte_pmd_bond.so.1 + librte_pmd_ring.so.2 + librte_port.so.3 + librte_power.so.1 + librte_reorder.so.1 + librte_ring.so.1 + librte_sched.so.1 + librte_table.so.2 + librte_timer.so.1 + librte_vhost.so.3 + + +Tested Platforms +---------------- + +.. This section should contain a list of platforms that were tested with this release. + + The format is: + + * <vendor> platform with <vendor> <type of devices> combinations + + * List of CPU + * List of OS + * List of devices + * Other relevant details... + + This section is a comment. do not overwrite or remove it. + Also, make sure to start the actual text at the margin. + ========================================================= + +This release has been tested with the below list of CPU/device/firmware/OS. +Each section describes a different set of combinations. + +* Intel(R) platforms with Mellanox(R) NICs combinations + + * Platform details + + * Intel(R) Xeon(R) CPU E5-2697 v2 @ 2.70GHz + * Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.80GHz + * Intel(R) Xeon(R) CPU E5-2697 v3 @ 2.60GHz + + * OS: + + * CentOS 7.0 + * Fedora 23 + * Fedora 24 + * FreeBSD 10.3 + * Red Hat Enterprise Linux 7.2 + * SUSE Enterprise Linux 12 + * Ubuntu 14.04 LTS + * Ubuntu 15.10 + * Ubuntu 16.04 LTS + * Wind River Linux 8 + + * MLNX_OFED: 4.0-1.0.1.0 + + * NICs: + + * Mellanox(R) ConnectX(R)-3 Pro 40G MCX354A-FCC_Ax (2x40G) + + * Host interface: PCI Express 3.0 x8 + * Device ID: 15b3:1007 + * Firmware version: 2.40.5030 + + * Mellanox(R) ConnectX(R)-4 10G MCX4111A-XCAT (1x10G) + + * Host interface: PCI Express 3.0 x8 + * Device ID: 15b3:1013 + * Firmware version: 12.18.1000 + + * Mellanox(R) ConnectX(R)-4 10G MCX4121A-XCAT (2x10G) + + * Host interface: PCI Express 3.0 x8 + * Device ID: 15b3:1013 + * Firmware version: 12.18.1000 + + * Mellanox(R) ConnectX(R)-4 25G MCX4111A-ACAT (1x25G) + + * Host interface: PCI Express 3.0 x8 + * Device ID: 15b3:1013 + * Firmware version: 12.18.1000 + + * Mellanox(R) ConnectX(R)-4 25G MCX4121A-ACAT (2x25G) + + * Host interface: PCI Express 3.0 x8 + * Device ID: 15b3:1013 + * Firmware version: 12.18.1000 + + * Mellanox(R) ConnectX(R)-4 40G MCX4131A-BCAT/MCX413A-BCAT (1x40G) + + * Host interface: PCI Express 3.0 x8 + * Device ID: 15b3:1013 + * Firmware version: 12.18.1000 + + * Mellanox(R) ConnectX(R)-4 40G MCX415A-BCAT (1x40G) + + * Host interface: PCI Express 3.0 x16 + * Device ID: 15b3:1013 + * Firmware version: 12.18.1000 + + * Mellanox(R) ConnectX(R)-4 50G MCX4131A-GCAT/MCX413A-GCAT (1x50G) + + * Host interface: PCI Express 3.0 x8 + * Device ID: 15b3:1013 + * Firmware version: 12.18.1000 + + * Mellanox(R) ConnectX(R)-4 50G MCX414A-BCAT (2x50G) + + * Host interface: PCI Express 3.0 x8 + * Device ID: 15b3:1013 + * Firmware version: 12.18.1000 + + * Mellanox(R) ConnectX(R)-4 50G MCX415A-GCAT/MCX416A-BCAT/MCX416A-GCAT (2x50G) + + * Host interface: PCI Express 3.0 x16 + * Device ID: 15b3:1013 + * Firmware version: 12.18.1000 + + * Mellanox(R) ConnectX(R)-4 50G MCX415A-CCAT (1x100G) + + * Host interface: PCI Express 3.0 x16 + * Device ID: 15b3:1013 + * Firmware version: 12.18.1000 + + * Mellanox(R) ConnectX(R)-4 100G MCX416A-CCAT (2x100G) + + * Host interface: PCI Express 3.0 x16 + * Device ID: 15b3:1013 + * Firmware version: 12.18.1000 + + * Mellanox(R) ConnectX(R)-4 Lx 10G MCX4121A-XCAT (2x10G) + + * Host interface: PCI Express 3.0 x8 + * Device ID: 15b3:1015 + * Firmware version: 14.18.1000 + + * Mellanox(R) ConnectX(R)-4 Lx 25G MCX4121A-ACAT (2x25G) + + * Host interface: PCI Express 3.0 x8 + * Device ID: 15b3:1015 + * Firmware version: 14.18.1000 + + * Mellanox(R) ConnectX(R)-5 100G MCX556A-ECAT (2x100G) + + * Host interface: PCI Express 3.0 x16 + * Device ID: 15b3:1017 + * Firmware version: 16.18.1000 + + * Mellanox(R) ConnectX-5 Ex EN 100G MCX516A-CDAT (2x100G) + + * Host interface: PCI Express 4.0 x16 + * Device ID: 15b3:1019 + * Firmware version: 16.18.1000 + +* IBM(R) Power8(R) with Mellanox(R) NICs combinations + + * Machine: + + * Processor: POWER8E (raw), AltiVec supported + + * type-model: 8247-22L + * Firmware FW810.21 (SV810_108) + + * OS: Ubuntu 16.04 LTS PPC le + + * MLNX_OFED: 4.0-1.0.1.0 + + * NICs: + + * Mellanox(R) ConnectX(R)-4 10G MCX4111A-XCAT (1x10G) + + * Host interface: PCI Express 3.0 x8 + * Device ID: 15b3:1013 + * Firmware version: 12.18.1000 + + * Mellanox(R) ConnectX(R)-4 10G MCX4121A-XCAT (2x10G) + + * Host interface: PCI Express 3.0 x8 + * Device ID: 15b3:1013 + * Firmware version: 12.18.1000 + + * Mellanox(R) ConnectX(R)-4 25G MCX4111A-ACAT (1x25G) + + * Host interface: PCI Express 3.0 x8 + * Device ID: 15b3:1013 + * Firmware version: 12.18.1000 + + * Mellanox(R) ConnectX(R)-4 25G MCX4121A-ACAT (2x25G) + + * Host interface: PCI Express 3.0 x8 + * Device ID: 15b3:1013 + * Firmware version: 12.18.1000 + + * Mellanox(R) ConnectX(R)-4 40G MCX4131A-BCAT/MCX413A-BCAT (1x40G) + + * Host interface: PCI Express 3.0 x8 + * Device ID: 15b3:1013 + * Firmware version: 12.18.1000 + + * Mellanox(R) ConnectX(R)-4 40G MCX415A-BCAT (1x40G) + + * Host interface: PCI Express 3.0 x16 + * Device ID: 15b3:1013 + * Firmware version: 12.18.1000 + + * Mellanox(R) ConnectX(R)-4 50G MCX4131A-GCAT/MCX413A-GCAT (1x50G) + + * Host interface: PCI Express 3.0 x8 + * Device ID: 15b3:1013 + * Firmware version: 12.18.1000 + + * Mellanox(R) ConnectX(R)-4 50G MCX414A-BCAT (2x50G) + + * Host interface: PCI Express 3.0 x8 + * Device ID: 15b3:1013 + * Firmware version: 12.18.1000 + + * Mellanox(R) ConnectX(R)-4 50G MCX415A-GCAT/MCX416A-BCAT/MCX416A-GCAT (2x50G) + + * Host interface: PCI Express 3.0 x16 + * Device ID: 15b3:1013 + * Firmware version: 12.18.1000 + + * Mellanox(R) ConnectX(R)-4 50G MCX415A-CCAT (1x100G) + + * Host interface: PCI Express 3.0 x16 + * Device ID: 15b3:1013 + * Firmware version: 12.18.1000 + + * Mellanox(R) ConnectX(R)-4 100G MCX416A-CCAT (2x100G) + + * Host interface: PCI Express 3.0 x16 + * Device ID: 15b3:1013 + * Firmware version: 12.18.1000 + + * Mellanox(R) ConnectX(R)-4 Lx 10G MCX4121A-XCAT (2x10G) + + * Host interface: PCI Express 3.0 x8 + * Device ID: 15b3:1015 + * Firmware version: 14.18.1000 + + * Mellanox(R) ConnectX(R)-4 Lx 25G MCX4121A-ACAT (2x25G) + + * Host interface: PCI Express 3.0 x8 + * Device ID: 15b3:1015 + * Firmware version: 14.18.1000 + + * Mellanox(R) ConnectX(R)-5 100G MCX556A-ECAT (2x100G) + + * Host interface: PCI Express 3.0 x16 + * Device ID: 15b3:1017 + * Firmware version: 16.18.1000 + +* Intel(R) platforms with Intel(R) NICs combinations + + * Platform details + + * Intel(R) Atom(TM) CPU C2758 @ 2.40GHz + * Intel(R) Xeon(R) CPU D-1540 @ 2.00GHz + * Intel(R) Xeon(R) CPU E5-4667 v3 @ 2.00GHz + * Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.80GHz + * Intel(R) Xeon(R) CPU E5-2699 v3 @ 2.30GHz + * Intel(R) Xeon(R) CPU E5-2695 v4 @ 2.10GHz + * Intel(R) Xeon(R) CPU E5-2658 v2 @ 2.40GHz + + * OS: + + * CentOS 7.2 + * Fedora 25 + * FreeBSD 11 + * Red Hat Enterprise Linux Server release 7.3 + * SUSE Enterprise Linux 12 + * Wind River Linux 8 + * Ubuntu 16.04 + * Ubuntu 16.10 + + * NICs: + + * Intel(R) 82599ES 10 Gigabit Ethernet Controller + + * Firmware version: 0x61bf0001 + * Device id (pf/vf): 8086:10fb / 8086:10ed + * Driver version: 4.0.1-k (ixgbe) + + * Intel(R) Corporation Ethernet Connection X552/X557-AT 10GBASE-T + + * Firmware version: 0x800001cf + * Device id (pf/vf): 8086:15ad / 8086:15a8 + * Driver version: 4.2.5 (ixgbe) + + * Intel(R) Ethernet Converged Network Adapter X710-DA4 (4x10G) + + * Firmware version: 5.05 + * Device id (pf/vf): 8086:1572 / 8086:154c + * Driver version: 1.5.23 (i40e) + + * Intel(R) Ethernet Converged Network Adapter X710-DA2 (2x10G) + + * Firmware version: 5.05 + * Device id (pf/vf): 8086:1572 / 8086:154c + * Driver version: 1.5.23 (i40e) + + * Intel(R) Ethernet Converged Network Adapter XL710-QDA1 (1x40G) + + * Firmware version: 5.05 + * Device id (pf/vf): 8086:1584 / 8086:154c + * Driver version: 1.5.23 (i40e) + + * Intel(R) Ethernet Converged Network Adapter XL710-QDA2 (2X40G) + + * Firmware version: 5.05 + * Device id (pf/vf): 8086:1583 / 8086:154c + * Driver version: 1.5.23 (i40e) + + * Intel(R) Corporation I350 Gigabit Network Connection + + * Firmware version: 1.48, 0x800006e7 + * Device id (pf/vf): 8086:1521 / 8086:1520 + * Driver version: 5.2.13-k (igb) |