diff options
author | 2016-06-14 07:50:17 -0700 | |
---|---|---|
committer | 2016-06-14 12:17:54 -0700 | |
commit | 97f17497d162afdb82c8704bf097f0fee3724b2e (patch) | |
tree | 1c6269614c0c15ffef8451c58ae8f8b30a1bc804 /doc/guides/sample_app_ug/ethtool.rst | |
parent | e04be89c2409570e0055b2cda60bd11395bb93b0 (diff) |
Imported Upstream version 16.04
Change-Id: I77eadcd8538a9122e4773cbe55b24033dc451757
Signed-off-by: C.J. Collier <cjcollier@linuxfoundation.org>
Diffstat (limited to 'doc/guides/sample_app_ug/ethtool.rst')
-rw-r--r-- | doc/guides/sample_app_ug/ethtool.rst | 160 |
1 files changed, 160 insertions, 0 deletions
diff --git a/doc/guides/sample_app_ug/ethtool.rst b/doc/guides/sample_app_ug/ethtool.rst new file mode 100644 index 00000000..4d1697e8 --- /dev/null +++ b/doc/guides/sample_app_ug/ethtool.rst @@ -0,0 +1,160 @@ + +.. BSD LICENSE + Copyright(c) 2015 Intel Corporation. All rights reserved. + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + * Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + * Neither the name of Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +Ethtool Sample Application +========================== + +The Ethtool sample application shows an implementation of an +ethtool-like API and provides a console environment that allows +its use to query and change Ethernet card parameters. The sample +is based upon a simple L2 frame reflector. + +Compiling the Application +------------------------- + +To compile the application: + +#. Go to the sample application directory: + + .. code-block:: console + + export RTE_SDK=/path/to/rte_sdk + cd ${RTE_SD}/examples/ethtool + +#. Set the target (a default target is used if not specified). For example: + + .. code-block:: console + + export RTE_TARGET=x86_64-native-linuxapp-gcc + + See the *DPDK Getting Started Guide* for possible RTE_TARGET values. + +#. Build the application: + + .. code-block:: console + + make + +Running the Application +----------------------- + +The application requires an available core for each port, plus one. +The only available options are the standard ones for the EAL: + +.. code-block:: console + + ./ethtool-app/ethtool-app/${RTE_TARGET}/ethtool [EAL options] + +Refer to the *DPDK Getting Started Guide* for general information on +running applications and the Environment Abstraction Layer (EAL) +options. + +Using the application +--------------------- + +The application is console-driven using the cmdline DPDK interface: + +.. code-block:: console + + EthApp> + +From this interface the available commands and descriptions of what +they do as as follows: + +* ``drvinfo``: Print driver info +* ``eeprom``: Dump EEPROM to file +* ``link``: Print port link states +* ``macaddr``: Gets/sets MAC address +* ``mtu``: Set NIC MTU +* ``open``: Open port +* ``pause``: Get/set port pause state +* ``portstats``: Print port statistics +* ``regs``: Dump port register(s) to file +* ``ringparam``: Get/set ring parameters +* ``rxmode``: Toggle port Rx mode +* ``stop``: Stop port +* ``validate``: Check that given MAC address is valid unicast address +* ``vlan``: Add/remove VLAN id +* ``quit``: Exit program + + +Explanation +----------- + +The sample program has two parts: A background `packet reflector`_ +that runs on a slave core, and a foreground `Ethtool Shell`_ that +runs on the master core. These are described below. + +Packet Reflector +~~~~~~~~~~~~~~~~ + +The background packet reflector is intended to demonstrate basic +packet processing on NIC ports controlled by the Ethtool shim. +Each incoming MAC frame is rewritten so that it is returned to +the sender, using the port in question's own MAC address as the +source address, and is then sent out on the same port. + +Ethtool Shell +~~~~~~~~~~~~~ + +The foreground part of the Ethtool sample is a console-based +interface that accepts commands as described in `using the +application`_. Individual call-back functions handle the detail +associated with each command, which make use of the functions +defined in the `Ethtool interface`_ to the DPDK functions. + +Ethtool interface +----------------- + +The Ethtool interface is built as a separate library, and implements +the following functions: + +- ``rte_ethtool_get_drvinfo()`` +- ``rte_ethtool_get_regs_len()`` +- ``rte_ethtool_get_regs()`` +- ``rte_ethtool_get_link()`` +- ``rte_ethtool_get_eeprom_len()`` +- ``rte_ethtool_get_eeprom()`` +- ``rte_ethtool_set_eeprom()`` +- ``rte_ethtool_get_pauseparam()`` +- ``rte_ethtool_set_pauseparam()`` +- ``rte_ethtool_net_open()`` +- ``rte_ethtool_net_stop()`` +- ``rte_ethtool_net_get_mac_addr()`` +- ``rte_ethtool_net_set_mac_addr()`` +- ``rte_ethtool_net_validate_addr()`` +- ``rte_ethtool_net_change_mtu()`` +- ``rte_ethtool_net_get_stats64()`` +- ``rte_ethtool_net_vlan_rx_add_vid()`` +- ``rte_ethtool_net_vlan_rx_kill_vid()`` +- ``rte_ethtool_net_set_rx_mode()`` +- ``rte_ethtool_get_ringparam()`` +- ``rte_ethtool_set_ringparam()`` |