diff options
author | 2017-05-16 14:51:32 +0200 | |
---|---|---|
committer | 2017-05-16 14:51:32 +0200 | |
commit | fca143f059a0bddd7d47b8dc2df646a891b0eb0f (patch) | |
tree | 4bfeadc905c977e45e54a90c42330553b8942e4e /doc/guides/sample_app_ug/l3_forward.rst | |
parent | ce3d555e43e3795b5d9507fcfc76b7a0a92fd0d6 (diff) |
Imported Upstream version 17.05
Diffstat (limited to 'doc/guides/sample_app_ug/l3_forward.rst')
-rw-r--r-- | doc/guides/sample_app_ug/l3_forward.rst | 28 |
1 files changed, 9 insertions, 19 deletions
diff --git a/doc/guides/sample_app_ug/l3_forward.rst b/doc/guides/sample_app_ug/l3_forward.rst index ab916b97..6a6b8fbe 100644 --- a/doc/guides/sample_app_ug/l3_forward.rst +++ b/doc/guides/sample_app_ug/l3_forward.rst @@ -129,43 +129,33 @@ Where, * ``--parse-ptype:`` Optional, set to use software to analyze packet type. Without this option, hardware will check the packet type. -For example, consider a dual processor socket platform where cores 0-7 and 16-23 appear on socket 0, while cores 8-15 and 24-31 appear on socket 1. -Let's say that the programmer wants to use memory from both NUMA nodes, the platform has only two ports, one connected to each NUMA node, -and the programmer wants to use two cores from each processor socket to do the packet processing. +For example, consider a dual processor socket platform with 8 physical cores, where cores 0-7 and 16-23 appear on socket 0, +while cores 8-15 and 24-31 appear on socket 1. -To enable L3 forwarding between two ports, using two cores, cores 1 and 2, from each processor, -while also taking advantage of local memory access by optimizing around NUMA, the programmer must enable two queues from each port, -pin to the appropriate cores and allocate memory from the appropriate NUMA node. This is achieved using the following command: +To enable L3 forwarding between two ports, assuming that both ports are in the same socket, using two cores, cores 1 and 2, +(which are in the same socket too), use the following command: .. code-block:: console - ./build/l3fwd -c 606 -n 4 -- -p 0x3 --config="(0,0,1),(0,1,2),(1,0,9),(1,1,10)" + ./build/l3fwd -l 1,2 -n 4 -- -p 0x3 --config="(0,0,1),(1,0,2)" In this command: -* The -c option enables cores 0, 1, 2, 3 +* The -l option enables cores 1, 2 * The -p option enables ports 0 and 1 -* The --config option enables two queues on each port and maps each (port,queue) pair to a specific core. - Logic to enable multiple RX queues using RSS and to allocate memory from the correct NUMA nodes - is included in the application and is done transparently. +* The --config option enables one queue on each port and maps each (port,queue) pair to a specific core. The following table shows the mapping in this example: +----------+-----------+-----------+-------------------------------------+ | **Port** | **Queue** | **lcore** | **Description** | | | | | | +----------+-----------+-----------+-------------------------------------+ -| 0 | 0 | 0 | Map queue 0 from port 0 to lcore 0. | +| 0 | 0 | 1 | Map queue 0 from port 0 to lcore 1. | | | | | | +----------+-----------+-----------+-------------------------------------+ -| 0 | 1 | 2 | Map queue 1 from port 0 to lcore 2. | -| | | | | -+----------+-----------+-----------+-------------------------------------+ -| 1 | 0 | 1 | Map queue 0 from port 1 to lcore 1. | -| | | | | -+----------+-----------+-----------+-------------------------------------+ -| 1 | 1 | 3 | Map queue 1 from port 1 to lcore 3. | +| 1 | 0 | 2 | Map queue 0 from port 1 to lcore 2. | | | | | | +----------+-----------+-----------+-------------------------------------+ |