Imported upstream release 16.04

* gbp import-orig ../dpdk-16.04.tar.xz

Change-Id: Iac2196db782ba322f6974d8a752acc34ce5024c3
Signed-off-by: C.J. Collier <cjcollier@linuxfoundation.org>

1 files changed, 494 insertions, 0 deletions

diff --git a/doc/guides/sample_app_ug/quota_watermark.rst b/doc/guides/sample_app_ug/quota_watermark.rst
new file mode 100644
index 00000000..c56683aa
--- /dev/null
+++ b/doc/guides/sample_app_ug/quota_watermark.rst
@@ -0,0 +1,494 @@
+..  BSD LICENSE
+    Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+    All rights reserved.
+
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions
+    are met:
+
+    * Redistributions of source code must retain the above copyright
+    notice, this list of conditions and the following disclaimer.
+    * Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in
+    the documentation and/or other materials provided with the
+    distribution.
+    * Neither the name of Intel Corporation nor the names of its
+    contributors may be used to endorse or promote products derived
+    from this software without specific prior written permission.
+
+    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+    "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+    LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+    A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+    OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+    SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+    LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+    DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+    THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+    OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+Quota and Watermark Sample Application
+======================================
+
+The Quota and Watermark sample application is a simple example of packet processing using Data Plane Development Kit (DPDK) that
+showcases the use of a quota as the maximum number of packets enqueue/dequeue at a time and low and high watermarks
+to signal low and high ring usage respectively.
+
+Additionally, it shows how ring watermarks can be used to feedback congestion notifications to data producers by
+temporarily stopping processing overloaded rings and sending Ethernet flow control frames.
+
+This sample application is split in two parts:
+
+*   qw - The core quota and watermark sample application
+
+*   qwctl - A command line tool to alter quota and watermarks while qw is running
+
+Overview
+--------
+
+The Quota and Watermark sample application performs forwarding for each packet that is received on a given port.
+The destination port is the adjacent port from the enabled port mask, that is,
+if the first four ports are enabled (port mask 0xf), ports 0 and 1 forward into each other,
+and ports 2 and 3 forward into each other.
+The MAC addresses of the forwarded Ethernet frames are not affected.
+
+Internally, packets are pulled from the ports by the master logical core and put on a variable length processing pipeline,
+each stage of which being connected by rings, as shown in :numref:`figure_pipeline_overview`.
+
+.. _figure_pipeline_overview:
+
+.. figure:: img/pipeline_overview.*
+
+   Pipeline Overview
+
+
+An adjustable quota value controls how many packets are being moved through the pipeline per enqueue and dequeue.
+Adjustable watermark values associated with the rings control a back-off mechanism that
+tries to prevent the pipeline from being overloaded by:
+
+*   Stopping enqueuing on rings for which the usage has crossed the high watermark threshold
+
+*   Sending Ethernet pause frames
+
+*   Only resuming enqueuing on a ring once its usage goes below a global low watermark threshold
+
+This mechanism allows congestion notifications to go up the ring pipeline and
+eventually lead to an Ethernet flow control frame being send to the source.
+
+On top of serving as an example of quota and watermark usage,
+this application can be used to benchmark ring based processing pipelines performance using a traffic- generator,
+as shown in :numref:`figure_ring_pipeline_perf_setup`.
+
+.. _figure_ring_pipeline_perf_setup:
+
+.. figure:: img/ring_pipeline_perf_setup.*
+
+   Ring-based Processing Pipeline Performance Setup
+
+
+Compiling the Application
+-------------------------
+
+#.  Go to the example directory:
+
+    .. code-block:: console
+
+        export RTE_SDK=/path/to/rte_sdk
+        cd ${RTE_SDK}/examples/quota_watermark
+
+#.  Set the target (a default target is used if not specified). For example:
+
+    .. code-block:: console
+
+        export RTE_TARGET=x86_64-native-linuxapp-gcc
+
+    See the *DPDK Getting Started Guide* for possible RTE_TARGET values.
+
+#.  Build the application:
+
+    .. code-block:: console
+
+        make
+
+Running the Application
+-----------------------
+
+The core application, qw, has to be started first.
+
+Once it is up and running, one can alter quota and watermarks while it runs using the control application, qwctl.
+
+Running the Core Application
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The application requires a single command line option:
+
+.. code-block:: console
+
+    ./qw/build/qw [EAL options] -- -p PORTMASK
+
+where,
+
+-p PORTMASK: A hexadecimal bitmask of the ports to configure
+
+To run the application in a linuxapp environment with four logical cores and ports 0 and 2,
+issue the following command:
+
+.. code-block:: console
+
+    ./qw/build/qw -c f -n 4 -- -p 5
+
+Refer to the *DPDK Getting Started Guide* for general information on running applications and
+the Environment Abstraction Layer (EAL) options.
+
+Running the Control Application
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The control application requires a number of command line options:
+
+.. code-block:: console
+
+    ./qwctl/build/qwctl [EAL options] --proc-type=secondary
+
+The --proc-type=secondary option is necessary for the EAL to properly initialize the control application to
+use the same huge pages as the core application and  thus be able to access its rings.
+
+To run the application in a linuxapp environment on logical core 0, issue the following command:
+
+.. code-block:: console
+
+    ./qwctl/build/qwctl -c 1 -n 4 --proc-type=secondary
+
+Refer to the *DPDK Getting Started* Guide for general information on running applications and
+the Environment Abstraction Layer (EAL) options.
+
+qwctl is an interactive command line that let the user change variables in a running instance of qw.
+The help command gives a list of available commands:
+
+.. code-block:: console
+
+    $ qwctl > help
+
+Code Overview
+-------------
+
+The following sections provide a quick guide to the application's source code.
+
+Core Application - qw
+~~~~~~~~~~~~~~~~~~~~~
+
+EAL and Drivers Setup
+^^^^^^^^^^^^^^^^^^^^^
+
+The EAL arguments are parsed at the beginning of the main() function:
+
+.. code-block:: c
+
+    ret = rte_eal_init(argc, argv);
+    if (ret < 0)
+        rte_exit(EXIT_FAILURE, "Cannot initialize EAL\n");
+
+    argc -= ret;
+    argv += ret;
+
+Then, a call to init_dpdk(), defined in init.c, is made to initialize the poll mode drivers:
+
+.. code-block:: c
+
+    void
+    init_dpdk(void)
+    {
+        int ret;
+
+        /* Bind the drivers to usable devices */
+
+        ret = rte_eal_pci_probe();
+        if (ret < 0)
+            rte_exit(EXIT_FAILURE, "rte_eal_pci_probe(): error %d\n", ret);
+
+        if (rte_eth_dev_count() < 2)
+            rte_exit(EXIT_FAILURE, "Not enough Ethernet port available\n");
+    }
+
+To fully understand this code, it is recommended to study the chapters that relate to the *Poll Mode Driver*
+in the *DPDK Getting Started Guide* and the *DPDK API Reference*.
+
+Shared Variables Setup
+^^^^^^^^^^^^^^^^^^^^^^
+
+The quota and low_watermark shared variables are put into an rte_memzone using a call to setup_shared_variables():
+
+.. code-block:: c
+
+    void
+    setup_shared_variables(void)
+    {
+        const struct rte_memzone *qw_memzone;
+
+        qw_memzone = rte_memzone_reserve(QUOTA_WATERMARK_MEMZONE_NAME, 2 * sizeof(int), rte_socket_id(), RTE_MEMZONE_2MB);
+
+        if (qw_memzone == NULL)
+            rte_exit(EXIT_FAILURE, "%s\n", rte_strerror(rte_errno));
+
+        quota = qw_memzone->addr;
+        low_watermark = (unsigned int *) qw_memzone->addr + sizeof(int);
+   }
+
+These two variables are initialized to a default value in main() and
+can be changed while qw is running using the qwctl control program.
+
+Application Arguments
+^^^^^^^^^^^^^^^^^^^^^
+
+The qw application only takes one argument: a port mask that specifies which ports should be used by the application.
+At least two ports are needed to run the application and there should be an even number of ports given in the port mask.
+
+The port mask parsing is done in parse_qw_args(), defined in args.c.
+
+Mbuf Pool Initialization
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+Once the application's arguments are parsed, an mbuf pool is created.
+It contains a set of mbuf objects that are used by the driver and the application to store network packets:
+
+.. code-block:: c
+
+    /* Create a pool of mbuf to store packets */
+
+    mbuf_pool = rte_mempool_create("mbuf_pool", MBUF_PER_POOL, MBUF_SIZE, 32, sizeof(struct rte_pktmbuf_pool_private),
+        rte_pktmbuf_pool_init, NULL, rte_pktmbuf_init, NULL, rte_socket_id(), 0);
+
+    if (mbuf_pool == NULL)
+        rte_panic("%s\n", rte_strerror(rte_errno));
+
+The rte_mempool is a generic structure used to handle pools of objects.
+In this case, it is necessary to create a pool that will be used by the driver,
+which expects to have some reserved space in the mempool structure, sizeof(struct rte_pktmbuf_pool_private) bytes.
+
+The number of allocated pkt mbufs is MBUF_PER_POOL, with a size of MBUF_SIZE each.
+A per-lcore cache of 32 mbufs is kept.
+The memory is allocated in on the master lcore's socket, but it is possible to extend this code to allocate one mbuf pool per socket.
+
+Two callback pointers are also given to the rte_mempool_create() function:
+
+*   The first callback pointer is to rte_pktmbuf_pool_init() and is used to initialize the private data of the mempool,
+    which is needed by the driver.
+    This function is provided by the mbuf API, but can be copied and extended by the developer.
+
+*   The second callback pointer given to rte_mempool_create() is the mbuf initializer.
+
+The default is used, that is, rte_pktmbuf_init(), which is provided in the rte_mbuf library.
+If a more complex application wants to extend the rte_pktmbuf structure for its own needs,
+a new function derived from rte_pktmbuf_init() can be created.
+
+Ports Configuration and Pairing
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Each port in the port mask is configured and a corresponding ring is created in the master lcore's array of rings.
+This ring is the first in the pipeline and will hold the packets directly coming from the port.
+
+.. code-block:: c
+
+    for (port_id = 0; port_id < RTE_MAX_ETHPORTS; port_id++)
+        if (is_bit_set(port_id, portmask)) {
+            configure_eth_port(port_id);
+            init_ring(master_lcore_id, port_id);
+        }
+
+    pair_ports();
+
+The configure_eth_port() and init_ring() functions are used to configure a port and a ring respectively and are defined in init.c.
+They make use of the DPDK APIs defined in rte_eth.h and rte_ring.h.
+
+pair_ports() builds the port_pairs[] array so that its key-value pairs are a mapping between reception and transmission ports.
+It is defined in init.c.
+
+Logical Cores Assignment
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+The application uses the master logical core to poll all the ports for new packets and enqueue them on a ring associated with the port.
+
+Each logical core except the last runs pipeline_stage() after a ring for each used port is initialized on that core.
+pipeline_stage() on core X dequeues packets from core X-1's rings and enqueue them on its own rings. See :numref:`figure_threads_pipelines`.
+
+.. code-block:: c
+
+    /* Start pipeline_stage() on all the available slave lcore but the last */
+
+    for (lcore_id = 0 ; lcore_id < last_lcore_id; lcore_id++) {
+        if (rte_lcore_is_enabled(lcore_id) && lcore_id != master_lcore_id) {
+            for (port_id = 0; port_id < RTE_MAX_ETHPORTS; port_id++)
+                if (is_bit_set(port_id, portmask))
+                    init_ring(lcore_id, port_id);
+
+                rte_eal_remote_launch(pipeline_stage, NULL, lcore_id);
+        }
+    }
+
+The last available logical core runs send_stage(),
+which is the last stage of the pipeline dequeuing packets from the last ring in the pipeline and
+sending them out on the destination port setup by pair_ports().
+
+.. code-block:: c
+
+    /* Start send_stage() on the last slave core */
+
+    rte_eal_remote_launch(send_stage, NULL, last_lcore_id);
+
+Receive, Process and Transmit Packets
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. _figure_threads_pipelines:
+
+.. figure:: img/threads_pipelines.*
+
+   Threads and Pipelines
+
+
+In the receive_stage() function running on the master logical core,
+the main task is to read ingress packets from the RX ports and enqueue them
+on the port's corresponding first ring in the pipeline.
+This is done using the following code:
+
+.. code-block:: c
+
+    lcore_id = rte_lcore_id();
+
+    /* Process each port round robin style */
+
+    for (port_id = 0; port_id < RTE_MAX_ETHPORTS; port_id++) {
+        if (!is_bit_set(port_id, portmask))
+            continue;
+
+        ring = rings[lcore_id][port_id];
+
+        if (ring_state[port_id] != RING_READY) {
+            if (rte_ring_count(ring) > *low_watermark)
+                continue;
+        else
+            ring_state[port_id] = RING_READY;
+        }
+
+        /* Enqueue received packets on the RX ring */
+
+        nb_rx_pkts = rte_eth_rx_burst(port_id, 0, pkts, *quota);
+
+        ret = rte_ring_enqueue_bulk(ring, (void *) pkts, nb_rx_pkts);
+        if (ret == -EDQUOT) {
+            ring_state[port_id] = RING_OVERLOADED;
+            send_pause_frame(port_id, 1337);
+        }
+    }
+
+For each port in the port mask, the corresponding ring's pointer is fetched into ring and that ring's state is checked:
+
+*   If it is in the RING_READY state, \*quota packets are grabbed from the port and put on the ring.
+    Should this operation make the ring's usage cross its high watermark,
+    the ring is marked as overloaded and an Ethernet flow control frame is sent to the source.
+
+*   If it is not in the RING_READY state, this port is ignored until the ring's usage crosses the \*low_watermark  value.
+
+The pipeline_stage() function's task is to process and move packets from the preceding pipeline stage.
+This thread is running on most of the logical cores to create and arbitrarily long pipeline.
+
+.. code-block:: c
+
+    lcore_id = rte_lcore_id();
+
+    previous_lcore_id = get_previous_lcore_id(lcore_id);
+
+    for (port_id = 0; port_id < RTE_MAX_ETHPORTS; port_id++) {
+        if (!is_bit_set(port_id, portmask))
+            continue;
+
+        tx = rings[lcore_id][port_id];
+        rx = rings[previous_lcore_id][port_id];
+        if (ring_state[port_id] != RING_READY) {
+            if (rte_ring_count(tx) > *low_watermark)
+                continue;
+        else
+            ring_state[port_id] = RING_READY;
+        }
+
+        /* Dequeue up to quota mbuf from rx */
+
+        nb_dq_pkts = rte_ring_dequeue_burst(rx, pkts, *quota);
+
+        if (unlikely(nb_dq_pkts < 0))
+            continue;
+
+        /* Enqueue them on tx */
+
+        ret = rte_ring_enqueue_bulk(tx, pkts, nb_dq_pkts);
+        if (ret == -EDQUOT)
+            ring_state[port_id] = RING_OVERLOADED;
+    }
+
+The thread's logic works mostly like receive_stage(),
+except that packets are moved from ring to ring instead of port to ring.
+
+In this example, no actual processing is done on the packets,
+but pipeline_stage() is an ideal place to perform any processing required by the application.
+
+Finally, the send_stage() function's task is to read packets from the last ring in a pipeline and
+send them on the destination port defined in the port_pairs[] array.
+It is running on the last available logical core only.
+
+.. code-block:: c
+
+    lcore_id = rte_lcore_id();
+
+    previous_lcore_id = get_previous_lcore_id(lcore_id);
+
+    for (port_id = 0; port_id < RTE_MAX_ETHPORTS; port_id++) {
+        if (!is_bit_set(port_id, portmask)) continue;
+
+        dest_port_id = port_pairs[port_id];
+        tx = rings[previous_lcore_id][port_id];
+
+        if (rte_ring_empty(tx)) continue;
+
+        /* Dequeue packets from tx and send them */
+
+        nb_dq_pkts = rte_ring_dequeue_burst(tx, (void *) tx_pkts, *quota);
+        nb_tx_pkts = rte_eth_tx_burst(dest_port_id, 0, tx_pkts, nb_dq_pkts);
+    }
+
+For each port in the port mask, up to \*quota packets are pulled from the last ring in its pipeline and
+sent on the destination port paired with the current port.
+
+Control Application - qwctl
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The qwctl application uses the rte_cmdline library to provide the user with an interactive command line that
+can be used to modify and inspect parameters in a running qw application.
+Those parameters are the global quota and low_watermark value as well as each ring's built-in high watermark.
+
+Command Definitions
+^^^^^^^^^^^^^^^^^^^
+
+The available commands are defined in commands.c.
+
+It is advised to use the cmdline sample application user guide as a reference for everything related to the rte_cmdline library.
+
+Accessing Shared Variables
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The setup_shared_variables() function retrieves the shared variables quota and
+low_watermark from the rte_memzone previously created by qw.
+
+.. code-block:: c
+
+    static void
+    setup_shared_variables(void)
+    {
+        const struct rte_memzone *qw_memzone;
+
+        qw_memzone = rte_memzone_lookup(QUOTA_WATERMARK_MEMZONE_NAME);
+        if (qw_memzone == NULL)
+            rte_exit(EXIT_FAILURE, "Couldn't find memzone\n");
+
+        quota = qw_memzone->addr;
+
+        low_watermark = (unsigned int *) qw_memzone->addr + sizeof(int);
+    }