New upstream version 17.08

Change-Id: I288b50990f52646089d6b1f3aaa6ba2f091a51d7
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>

1 files changed, 52 insertions, 22 deletions

diff --git a/doc/guides/tools/cryptoperf.rst b/doc/guides/tools/cryptoperf.rst
index 2d225d56..457f817c 100644
--- a/doc/guides/tools/cryptoperf.rst
+++ b/doc/guides/tools/cryptoperf.rst
@@ -186,6 +186,9 @@ The following are the appication command-line options:
            crypto_snow3g
            crypto_kasumi
            crypto_zuc
+           crypto_dpaa2_sec
+           crypto_armv8
+           crypto_scheduler
 
 * ``--optype <name>``
 
@@ -223,10 +226,8 @@ The following are the appication command-line options:
            3des-ecb
            3des-ctr
            aes-cbc
-           aes-ccm
            aes-ctr
            aes-ecb
-           aes-gcm
            aes-f8
            aes-xts
            arc4
@@ -257,9 +258,7 @@ The following are the appication command-line options:
 
            3des-cbc
            aes-cbc-mac
-           aes-ccm
            aes-cmac
-           aes-gcm
            aes-gmac
            aes-xcbc-mac
            md5
@@ -290,13 +289,41 @@ The following are the appication command-line options:
 
         Set the size of authentication key.
 
-* ``--auth-digest-sz <n>``
+* ``--auth-iv-sz <n>``
+
+        Set the size of auth iv.
+
+* ``--aead-algo <name>``
+
+        Set AEAD algorithm name, where ``name`` is one
+        of the following::
+
+           aes-ccm
+           aes-gcm
+
+* ``--aead-op <mode>``
 
-        Set the size of authentication digest.
+        Set AEAD operation mode, where ``mode`` is one of
+        the following::
+
+           encrypt
+           decrypt
+
+* ``--aead-key-sz <n>``
+
+        Set the size of AEAD key.
 
-* ``--auth-aad-sz <n>``
+* ``--aead-iv-sz <n>``
 
-        Set the size of authentication aad.
+        Set the size of AEAD iv.
+
+* ``--aead-aad-sz <n>``
+
+        Set the size of AEAD aad.
+
+* ``--digest-sz <n>``
+
+        Set the size of digest.
 
 * ``--csv-friendly``
 
@@ -308,9 +335,9 @@ Test Vector File
 The test vector file is a text file contain information about test vectors.
 The file is made of the sections. The first section doesn't have header.
 It contain global information used in each test variant vectors -
-typicaly information about plaintext, ciphertext, cipher key, aut key,
+typically information about plaintext, ciphertext, cipher key, aut key,
 initial vector. All other sections begin header.
-The sections contain particular information typicaly digest.
+The sections contain particular information typically digest.
 
 **Format of the file:**
 
@@ -345,9 +372,13 @@ a string of bytes in C byte array format::
 
         Key used in auth operation.
 
-* ``iv``
+* ``cipher_iv``
+
+        Cipher Initial Vector.
+
+* ``auth_iv``
 
-        Initial vector.
+        Auth Initial Vector.
 
 * ``aad``
 
@@ -362,19 +393,19 @@ Examples
 
 Call application for performance throughput test of single Aesni MB PMD
 for cipher encryption aes-cbc and auth generation sha1-hmac,
-one milion operations, burst size 32, packet size 64::
+one million operations, burst size 32, packet size 64::
 
-   dpdk-test-crypto-perf -l 6-7 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 --
+   dpdk-test-crypto-perf -l 6-7 --vdev crypto_aesni_mb -w 0000:00:00.0 --
    --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth
    --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo
-   sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12
+   sha1-hmac --auth-op generate --auth-key-sz 64 --digest-sz 12
    --total-ops 10000000 --burst-sz 32 --buffer-sz 64
 
 Call application for performance latency test of two Aesni MB PMD executed
 on two cores for cipher encryption aes-cbc, ten operations in silent mode::
 
-   dpdk-test-crypto-perf -l 4-7 --vdev crypto_aesni_mb_pmd1
-   --vdev crypto_aesni_mb_pmd2 -w 0000:00:00.0 -- --devtype crypto_aesni_mb
+   dpdk-test-crypto-perf -l 4-7 --vdev crypto_aesni_mb1
+   --vdev crypto_aesni_mb2 -w 0000:00:00.0 -- --devtype crypto_aesni_mb
    --cipher-algo aes-cbc --cipher-key-sz 16 --cipher-iv-sz 16
    --cipher-op encrypt --optype cipher-only --silent
    --ptest latency --total-ops 10
@@ -385,10 +416,9 @@ in silent mode, test vector provide in file "test_aes_gcm.data"
 with packet verification::
 
    dpdk-test-crypto-perf -l 4-7 --vdev crypto_openssl -w 0000:00:00.0 --
-   --devtype crypto_openssl --cipher-algo aes-gcm --cipher-key-sz 16
-   --cipher-iv-sz 16 --cipher-op encrypt --auth-algo aes-gcm --auth-key-sz 16
-   --auth-digest-sz 16 --auth-aad-sz 16 --auth-op generate --optype aead
-   --silent --ptest verify --total-ops 10
+   --devtype crypto_openssl --aead-algo aes-gcm --aead-key-sz 16
+   --aead-iv-sz 16 --aead-op encrypt --aead-aad-sz 16 --digest-sz 16
+   --optype aead --silent --ptest verify --total-ops 10
    --test-file test_aes_gcm.data
 
 Test vector file for cipher algorithm aes cbc 256 with authorization sha::
@@ -412,7 +442,7 @@ Test vector file for cipher algorithm aes cbc 256 with authorization sha::
    0xf5, 0x0c, 0xe7, 0xa2, 0xa6, 0x23, 0xd5, 0x3d, 0x95, 0xd8, 0xcd, 0x86, 0x79, 0xf5, 0x01, 0x47,
    0x4f, 0xf9, 0x1d, 0x9d, 0x36, 0xf7, 0x68, 0x1a, 0x64, 0x44, 0x58, 0x5d, 0xe5, 0x81, 0x15, 0x2a,
    0x41, 0xe4, 0x0e, 0xaa, 0x1f, 0x04, 0x21, 0xff, 0x2c, 0xf3, 0x73, 0x2b, 0x48, 0x1e, 0xd2, 0xf7
-   iv =
+   cipher_iv =
    0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F
    # Section sha 1 hmac buff 32
    [sha1_hmac_buff_32]