Imported Upstream version 16.11.2

Change-Id: I947038e46a2c747296dc7aa7522239733ca2f659
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>

6 files changed, 131 insertions, 7 deletions

diff --git a/doc/guides/cryptodevs/qat.rst b/doc/guides/cryptodevs/qat.rst
index 52a9ae35..a7b28eb9 100644
--- a/doc/guides/cryptodevs/qat.rst
+++ b/doc/guides/cryptodevs/qat.rst
@@ -80,6 +80,7 @@ Limitations
 * SNOW 3G (UEA2) and KASUMI (F8) supported only if cipher length, cipher offset fields are byte-aligned.
 * SNOW 3G (UIA2) and KASUMI (F9) supported only if hash length, hash offset fields are byte-aligned.
 * No BSD support as BSD QAT kernel driver not available.
+* Maximum additional authenticated data (AAD) for GCM is 240 bytes long.
 
 
 Installation
diff --git a/doc/guides/nics/bnx2x.rst b/doc/guides/nics/bnx2x.rst
index 6d1768a5..2e34942d 100644
--- a/doc/guides/nics/bnx2x.rst
+++ b/doc/guides/nics/bnx2x.rst
@@ -96,9 +96,11 @@ Config File Options
 The following options can be modified in the ``.config`` file. Please note that
 enabling debugging options may affect system performance.
 
-- ``CONFIG_RTE_LIBRTE_BNX2X_PMD`` (default **y**)
+- ``CONFIG_RTE_LIBRTE_BNX2X_PMD`` (default **n**)
 
-  Toggle compilation of bnx2x driver.
+  Toggle compilation of bnx2x driver. To use bnx2x PMD set this config parameter
+  to 'y'. Also, in order for firmware binary to load user will need zlib devel
+  package installed.
 
 - ``CONFIG_RTE_LIBRTE_BNX2X_DEBUG`` (default **n**)
 
diff --git a/doc/guides/nics/thunderx.rst b/doc/guides/nics/thunderx.rst
index 187c9a4a..b12cc8e3 100644
--- a/doc/guides/nics/thunderx.rst
+++ b/doc/guides/nics/thunderx.rst
@@ -156,7 +156,7 @@ managed by ``librte_pmd_thunderx_nicvf`` in the Linux operating system.
    .. code-block:: console
 
       ./arm64-thunderx-linuxapp-gcc/app/testpmd -c 0xf -n 4 -w 0002:01:00.2 \
-        -- -i --disable-hw-vlan-filter --crc-strip --no-flush-rx \
+        -- -i --disable-hw-vlan-filter --no-flush-rx \
         --port-topology=loop
 
    Example output:
diff --git a/doc/guides/rel_notes/release_16_11.rst b/doc/guides/rel_notes/release_16_11.rst
index fbf2e368..85972b17 100644
--- a/doc/guides/rel_notes/release_16_11.rst
+++ b/doc/guides/rel_notes/release_16_11.rst
@@ -708,3 +708,124 @@ Fixes in 16.11 LTS Release
 * vhost: fix guest/host physical address mapping
 * vhost: fix long stall of negotiation
 * vhost: fix memory leak
+
+16.11.2
+~~~~~~~
+
+* app/testpmd: fix TC mapping in DCB init config
+* app/testpmd: fix crash at mbuf pool creation
+* app/testpmd: fix exit without freeing resources
+* app/testpmd: fix init config for multi-queue mode
+* app/testpmd: fix number of mbufs in pool
+* app: enable HW CRC strip by default
+* crypto/openssl: fix AAD capabilities for AES-GCM
+* crypto/openssl: fix AES-GCM capability
+* crypto/qat: fix AES-GCM authentication length
+* crypto/qat: fix IV zero physical address
+* crypto/qat: fix dequeue statistics
+* cryptodev: fix API digest length comments
+* doc: add limitation of AAD size to QAT guide
+* doc: explain zlib dependency for bnx2x
+* eal/linux: fix build with glibc 2.25
+* eal: fix debug macro redefinition
+* examples/ip_fragmentation: fix check of packet type
+* examples/l2fwd-crypto: fix AEAD tests when AAD is zero
+* examples/l2fwd-crypto: fix packets array index
+* examples/l2fwd-crypto: fix padding calculation
+* examples/l3fwd-power: fix Rx descriptor size
+* examples/l3fwd-power: fix handling no Rx queue
+* examples/load_balancer: fix Tx flush
+* examples/multi_process: fix timer update
+* examples/performance-thread: fix build on FreeBSD
+* examples/performance-thread: fix build on FreeBSD 10.0
+* examples/performance-thread: fix compilation on Suse 11 SP2
+* examples/quota_watermark: fix requirement for 2M pages
+* examples: enable HW CRC strip by default
+* examples: fix build clean on FreeBSD
+* kni: fix build with kernel 4.11
+* kni: fix crash caused by freeing mempool
+* kni: fix possible memory leak
+* mbuf: fix missing includes in exported header
+* mk: fix lib filtering when linking app
+* mk: fix quoting for ARM mtune argument
+* mk: fix shell errors when building with clang
+* net/bnx2x: fix transmit queue free threshold
+* net/bonding: allow configuring jumbo frames without slaves
+* net/bonding: fix updating slave link status
+* net/cxgbe: fix possible null pointer dereference
+* net/e1000/base: fix multicast setting in VF
+* net/ena: cleanup if refilling of Rx descriptors fails
+* net/ena: fix Rx descriptors allocation
+* net/ena: fix delayed cleanup of Rx descriptors
+* net/ena: fix return of hash control flushing
+* net/fm10k: fix memory overflow in 32-bit SSE Rx
+* net/fm10k: fix pointer cast
+* net/i40e/base: fix potential out of bound array access
+* net/i40e: add missing 25G link speed
+* net/i40e: ensure vector mode is not used with QinQ
+* net/i40e: fix TC bitmap of VEB
+* net/i40e: fix VF link speed
+* net/i40e: fix VF link status update
+* net/i40e: fix allocation check
+* net/i40e: fix compile error
+* net/i40e: fix hash input set on X722
+* net/i40e: fix incorrect packet index reference
+* net/i40e: fix mbuf alloc failed counter
+* net/i40e: fix memory overflow in 32-bit SSE Rx
+* net/i40e: fix setup when bulk is disabled
+* net/igb: fix VF MAC address setting
+* net/igb: fix VF MAC address setting
+* net/ixgbe/base: fix build error
+* net/ixgbe: fix Rx queue blocking issue
+* net/ixgbe: fix TC bandwidth setting
+* net/ixgbe: fix VF Rx mode for allmulticast disabled
+* net/ixgbe: fix all queues drop setting of DCB
+* net/ixgbe: fix memory overflow in 32-bit SSE Rx
+* net/ixgbe: fix multi-queue mode check in SRIOV mode
+* net/ixgbe: fix setting MTU on stopped device
+* net/ixgbevf: set xstats id values
+* net/mlx4: fix Rx after mbuf alloc failure
+* net/mlx4: fix returned values upon failed probing
+* net/mlx4: update link status upon probing with LSC
+* net/mlx5: fix Tx when first segment size is too short
+* net/mlx5: fix VLAN stripping indication
+* net/mlx5: fix an uninitialized variable
+* net/mlx5: fix returned values upon failed probing
+* net/mlx5: fix reusing Rx/Tx queues
+* net/mlx5: fix supported packets types
+* net/nfp: fix packet/data length conversion
+* net/pcap: fix using mbuf after freeing it
+* net/qede/base: fix find zero bit macro
+* net/qede: fix FW version string for VF
+* net/qede: fix default MAC address handling
+* net/qede: fix fastpath rings reset phase
+* net/qede: fix missing UDP protocol in RSS offload types
+* net/thunderx: fix 32-bit build
+* net/thunderx: fix build on FreeBSD
+* net/thunderx: fix deadlock in Rx path
+* net/thunderx: fix stats access out of bounds
+* net/virtio-user: fix address on 32-bit system
+* net/virtio-user: fix overflow
+* net/virtio: disable LSC interrupt if MSIX not enabled
+* net/virtio: fix MSI-X for modern devices
+* net/virtio: fix crash when closing twice
+* net/virtio: fix link status always being up
+* net/virtio: fix link status always down
+* net/virtio: fix queue notify
+* net/vmxnet3: fix build with gcc 7
+* net/vmxnet3: fix queue size changes
+* net: fix stripped VLAN flag for offload emulation
+* nic_uio: fix device binding at boot
+* pci: fix device registration on FreeBSD
+* test/cmdline: fix missing break in switch
+* test/mempool: free mempool on exit
+* test: enable HW CRC strip by default
+* vfio: fix disabling INTx
+* vfio: fix secondary process start
+* vhost: change log levels in client mode
+* vhost: fix dequeue zero copy
+* vhost: fix false sharing
+* vhost: fix fd leaks for vhost-user server mode
+* vhost: fix max queues
+* vhost: fix multiple queue not enabled for old kernels
+* vhost: fix use after free
diff --git a/doc/guides/testpmd_app_ug/run_app.rst b/doc/guides/testpmd_app_ug/run_app.rst
index d7c51209..ac7d4582 100644
--- a/doc/guides/testpmd_app_ug/run_app.rst
+++ b/doc/guides/testpmd_app_ug/run_app.rst
@@ -281,9 +281,9 @@ The commandline options are:
     In perfect filter mode, when a rule is added with queue = -1, the packet will be enqueued into the RX drop-queue.
     If the drop-queue does not exist, the packet is dropped. The default value is N=127.
 
-*   ``--crc-strip``
+*   ``--disable-crc-strip``
 
-    Enable hardware CRC stripping.
+    Disable hardware CRC stripping.
 
 *   ``--enable-lro``
 
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index f1c269a3..70d2e4d7 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -1257,9 +1257,9 @@ Set hardware CRC stripping on or off for all ports::
 
    testpmd> port config all crc-strip (on|off)
 
-CRC stripping is off by default.
+CRC stripping is on by default.
 
-The ``on`` option is equivalent to the ``--crc-strip`` command-line option.
+The ``off`` option is equivalent to the ``--disable-crc-strip`` command-line option.
 
 port config - scatter
 ~~~~~~~~~~~~~~~~~~~~~~~