diff options
author | 2017-05-16 14:51:32 +0200 | |
---|---|---|
committer | 2017-05-16 16:20:45 +0200 | |
commit | 7595afa4d30097c1177b69257118d8ad89a539be (patch) | |
tree | 4bfeadc905c977e45e54a90c42330553b8942e4e /drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c | |
parent | ce3d555e43e3795b5d9507fcfc76b7a0a92fd0d6 (diff) |
Imported Upstream version 17.05
Change-Id: Id1e419c5a214e4a18739663b91f0f9a549f1fdc6
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Diffstat (limited to 'drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c')
-rw-r--r-- | drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c | 1656 |
1 files changed, 1656 insertions, 0 deletions
diff --git a/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c b/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c new file mode 100644 index 00000000..4e01fe81 --- /dev/null +++ b/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c @@ -0,0 +1,1656 @@ +/*- + * BSD LICENSE + * + * Copyright (c) 2016 Freescale Semiconductor, Inc. All rights reserved. + * Copyright (c) 2016 NXP. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Freescale Semiconductor, Inc nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <time.h> +#include <net/if.h> + +#include <rte_mbuf.h> +#include <rte_cryptodev.h> +#include <rte_malloc.h> +#include <rte_memcpy.h> +#include <rte_string_fns.h> +#include <rte_cycles.h> +#include <rte_kvargs.h> +#include <rte_dev.h> +#include <rte_cryptodev_pmd.h> +#include <rte_common.h> +#include <rte_fslmc.h> +#include <fslmc_vfio.h> +#include <dpaa2_hw_pvt.h> +#include <dpaa2_hw_dpio.h> +#include <dpaa2_hw_mempool.h> +#include <fsl_dpseci.h> +#include <fsl_mc_sys.h> + +#include "dpaa2_sec_priv.h" +#include "dpaa2_sec_logs.h" + +/* RTA header files */ +#include <hw/desc/ipsec.h> +#include <hw/desc/algo.h> + +/* Minimum job descriptor consists of a oneword job descriptor HEADER and + * a pointer to the shared descriptor + */ +#define MIN_JOB_DESC_SIZE (CAAM_CMD_SZ + CAAM_PTR_SZ) +#define FSL_VENDOR_ID 0x1957 +#define FSL_DEVICE_ID 0x410 +#define FSL_SUBSYSTEM_SEC 1 +#define FSL_MC_DPSECI_DEVID 3 + +#define NO_PREFETCH 0 +#define TDES_CBC_IV_LEN 8 +#define AES_CBC_IV_LEN 16 +enum rta_sec_era rta_sec_era = RTA_SEC_ERA_8; + +static inline int +build_authenc_fd(dpaa2_sec_session *sess, + struct rte_crypto_op *op, + struct qbman_fd *fd, uint16_t bpid) +{ + struct rte_crypto_sym_op *sym_op = op->sym; + struct ctxt_priv *priv = sess->ctxt; + struct qbman_fle *fle, *sge; + struct sec_flow_context *flc; + uint32_t auth_only_len = sym_op->auth.data.length - + sym_op->cipher.data.length; + int icv_len = sym_op->auth.digest.length; + uint8_t *old_icv; + uint32_t mem_len = (7 * sizeof(struct qbman_fle)) + icv_len; + + PMD_INIT_FUNC_TRACE(); + + /* we are using the first FLE entry to store Mbuf. + * Currently we donot know which FLE has the mbuf stored. + * So while retreiving we can go back 1 FLE from the FD -ADDR + * to get the MBUF Addr from the previous FLE. + * We can have a better approach to use the inline Mbuf + */ + fle = rte_zmalloc(NULL, mem_len, RTE_CACHE_LINE_SIZE); + if (!fle) { + RTE_LOG(ERR, PMD, "Memory alloc failed for SGE\n"); + return -1; + } + DPAA2_SET_FLE_ADDR(fle, DPAA2_OP_VADDR_TO_IOVA(op)); + fle = fle + 1; + sge = fle + 2; + if (likely(bpid < MAX_BPID)) { + DPAA2_SET_FD_BPID(fd, bpid); + DPAA2_SET_FLE_BPID(fle, bpid); + DPAA2_SET_FLE_BPID(fle + 1, bpid); + DPAA2_SET_FLE_BPID(sge, bpid); + DPAA2_SET_FLE_BPID(sge + 1, bpid); + DPAA2_SET_FLE_BPID(sge + 2, bpid); + DPAA2_SET_FLE_BPID(sge + 3, bpid); + } else { + DPAA2_SET_FD_IVP(fd); + DPAA2_SET_FLE_IVP(fle); + DPAA2_SET_FLE_IVP((fle + 1)); + DPAA2_SET_FLE_IVP(sge); + DPAA2_SET_FLE_IVP((sge + 1)); + DPAA2_SET_FLE_IVP((sge + 2)); + DPAA2_SET_FLE_IVP((sge + 3)); + } + + /* Save the shared descriptor */ + flc = &priv->flc_desc[0].flc; + /* Configure FD as a FRAME LIST */ + DPAA2_SET_FD_ADDR(fd, DPAA2_VADDR_TO_IOVA(fle)); + DPAA2_SET_FD_COMPOUND_FMT(fd); + DPAA2_SET_FD_FLC(fd, DPAA2_VADDR_TO_IOVA(flc)); + + PMD_TX_LOG(DEBUG, "auth_off: 0x%x/length %d, digest-len=%d\n" + "cipher_off: 0x%x/length %d, iv-len=%d data_off: 0x%x\n", + sym_op->auth.data.offset, + sym_op->auth.data.length, + sym_op->auth.digest.length, + sym_op->cipher.data.offset, + sym_op->cipher.data.length, + sym_op->cipher.iv.length, + sym_op->m_src->data_off); + + /* Configure Output FLE with Scatter/Gather Entry */ + DPAA2_SET_FLE_ADDR(fle, DPAA2_VADDR_TO_IOVA(sge)); + if (auth_only_len) + DPAA2_SET_FLE_INTERNAL_JD(fle, auth_only_len); + fle->length = (sess->dir == DIR_ENC) ? + (sym_op->cipher.data.length + icv_len) : + sym_op->cipher.data.length; + + DPAA2_SET_FLE_SG_EXT(fle); + + /* Configure Output SGE for Encap/Decap */ + DPAA2_SET_FLE_ADDR(sge, DPAA2_MBUF_VADDR_TO_IOVA(sym_op->m_src)); + DPAA2_SET_FLE_OFFSET(sge, sym_op->cipher.data.offset + + sym_op->m_src->data_off); + sge->length = sym_op->cipher.data.length; + + if (sess->dir == DIR_ENC) { + sge++; + DPAA2_SET_FLE_ADDR(sge, + DPAA2_VADDR_TO_IOVA(sym_op->auth.digest.data)); + sge->length = sym_op->auth.digest.length; + DPAA2_SET_FD_LEN(fd, (sym_op->auth.data.length + + sym_op->cipher.iv.length)); + } + DPAA2_SET_FLE_FIN(sge); + + sge++; + fle++; + + /* Configure Input FLE with Scatter/Gather Entry */ + DPAA2_SET_FLE_ADDR(fle, DPAA2_VADDR_TO_IOVA(sge)); + DPAA2_SET_FLE_SG_EXT(fle); + DPAA2_SET_FLE_FIN(fle); + fle->length = (sess->dir == DIR_ENC) ? + (sym_op->auth.data.length + sym_op->cipher.iv.length) : + (sym_op->auth.data.length + sym_op->cipher.iv.length + + sym_op->auth.digest.length); + + /* Configure Input SGE for Encap/Decap */ + DPAA2_SET_FLE_ADDR(sge, DPAA2_VADDR_TO_IOVA(sym_op->cipher.iv.data)); + sge->length = sym_op->cipher.iv.length; + sge++; + + DPAA2_SET_FLE_ADDR(sge, DPAA2_MBUF_VADDR_TO_IOVA(sym_op->m_src)); + DPAA2_SET_FLE_OFFSET(sge, sym_op->auth.data.offset + + sym_op->m_src->data_off); + sge->length = sym_op->auth.data.length; + if (sess->dir == DIR_DEC) { + sge++; + old_icv = (uint8_t *)(sge + 1); + memcpy(old_icv, sym_op->auth.digest.data, + sym_op->auth.digest.length); + memset(sym_op->auth.digest.data, 0, sym_op->auth.digest.length); + DPAA2_SET_FLE_ADDR(sge, DPAA2_VADDR_TO_IOVA(old_icv)); + sge->length = sym_op->auth.digest.length; + DPAA2_SET_FD_LEN(fd, (sym_op->auth.data.length + + sym_op->auth.digest.length + + sym_op->cipher.iv.length)); + } + DPAA2_SET_FLE_FIN(sge); + if (auth_only_len) { + DPAA2_SET_FLE_INTERNAL_JD(fle, auth_only_len); + DPAA2_SET_FD_INTERNAL_JD(fd, auth_only_len); + } + return 0; +} + +static inline int +build_auth_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op, + struct qbman_fd *fd, uint16_t bpid) +{ + struct rte_crypto_sym_op *sym_op = op->sym; + struct qbman_fle *fle, *sge; + uint32_t mem_len = (sess->dir == DIR_ENC) ? + (3 * sizeof(struct qbman_fle)) : + (5 * sizeof(struct qbman_fle) + + sym_op->auth.digest.length); + struct sec_flow_context *flc; + struct ctxt_priv *priv = sess->ctxt; + uint8_t *old_digest; + + PMD_INIT_FUNC_TRACE(); + + fle = rte_zmalloc(NULL, mem_len, RTE_CACHE_LINE_SIZE); + if (!fle) { + RTE_LOG(ERR, PMD, "Memory alloc failed for FLE\n"); + return -1; + } + /* TODO we are using the first FLE entry to store Mbuf. + * Currently we donot know which FLE has the mbuf stored. + * So while retreiving we can go back 1 FLE from the FD -ADDR + * to get the MBUF Addr from the previous FLE. + * We can have a better approach to use the inline Mbuf + */ + DPAA2_SET_FLE_ADDR(fle, DPAA2_OP_VADDR_TO_IOVA(op)); + fle = fle + 1; + + if (likely(bpid < MAX_BPID)) { + DPAA2_SET_FD_BPID(fd, bpid); + DPAA2_SET_FLE_BPID(fle, bpid); + DPAA2_SET_FLE_BPID(fle + 1, bpid); + } else { + DPAA2_SET_FD_IVP(fd); + DPAA2_SET_FLE_IVP(fle); + DPAA2_SET_FLE_IVP((fle + 1)); + } + flc = &priv->flc_desc[DESC_INITFINAL].flc; + DPAA2_SET_FD_FLC(fd, DPAA2_VADDR_TO_IOVA(flc)); + + DPAA2_SET_FLE_ADDR(fle, DPAA2_VADDR_TO_IOVA(sym_op->auth.digest.data)); + fle->length = sym_op->auth.digest.length; + + DPAA2_SET_FD_ADDR(fd, DPAA2_VADDR_TO_IOVA(fle)); + DPAA2_SET_FD_COMPOUND_FMT(fd); + fle++; + + if (sess->dir == DIR_ENC) { + DPAA2_SET_FLE_ADDR(fle, + DPAA2_MBUF_VADDR_TO_IOVA(sym_op->m_src)); + DPAA2_SET_FLE_OFFSET(fle, sym_op->auth.data.offset + + sym_op->m_src->data_off); + DPAA2_SET_FD_LEN(fd, sym_op->auth.data.length); + fle->length = sym_op->auth.data.length; + } else { + sge = fle + 2; + DPAA2_SET_FLE_SG_EXT(fle); + DPAA2_SET_FLE_ADDR(fle, DPAA2_VADDR_TO_IOVA(sge)); + + if (likely(bpid < MAX_BPID)) { + DPAA2_SET_FLE_BPID(sge, bpid); + DPAA2_SET_FLE_BPID(sge + 1, bpid); + } else { + DPAA2_SET_FLE_IVP(sge); + DPAA2_SET_FLE_IVP((sge + 1)); + } + DPAA2_SET_FLE_ADDR(sge, + DPAA2_MBUF_VADDR_TO_IOVA(sym_op->m_src)); + DPAA2_SET_FLE_OFFSET(sge, sym_op->auth.data.offset + + sym_op->m_src->data_off); + + DPAA2_SET_FD_LEN(fd, sym_op->auth.data.length + + sym_op->auth.digest.length); + sge->length = sym_op->auth.data.length; + sge++; + old_digest = (uint8_t *)(sge + 1); + rte_memcpy(old_digest, sym_op->auth.digest.data, + sym_op->auth.digest.length); + memset(sym_op->auth.digest.data, 0, sym_op->auth.digest.length); + DPAA2_SET_FLE_ADDR(sge, DPAA2_VADDR_TO_IOVA(old_digest)); + sge->length = sym_op->auth.digest.length; + fle->length = sym_op->auth.data.length + + sym_op->auth.digest.length; + DPAA2_SET_FLE_FIN(sge); + } + DPAA2_SET_FLE_FIN(fle); + + return 0; +} + +static int +build_cipher_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op, + struct qbman_fd *fd, uint16_t bpid) +{ + struct rte_crypto_sym_op *sym_op = op->sym; + struct qbman_fle *fle, *sge; + uint32_t mem_len = (5 * sizeof(struct qbman_fle)); + struct sec_flow_context *flc; + struct ctxt_priv *priv = sess->ctxt; + + PMD_INIT_FUNC_TRACE(); + + /* todo - we can use some mempool to avoid malloc here */ + fle = rte_zmalloc(NULL, mem_len, RTE_CACHE_LINE_SIZE); + if (!fle) { + RTE_LOG(ERR, PMD, "Memory alloc failed for SGE\n"); + return -1; + } + /* TODO we are using the first FLE entry to store Mbuf. + * Currently we donot know which FLE has the mbuf stored. + * So while retreiving we can go back 1 FLE from the FD -ADDR + * to get the MBUF Addr from the previous FLE. + * We can have a better approach to use the inline Mbuf + */ + DPAA2_SET_FLE_ADDR(fle, DPAA2_OP_VADDR_TO_IOVA(op)); + fle = fle + 1; + sge = fle + 2; + + if (likely(bpid < MAX_BPID)) { + DPAA2_SET_FD_BPID(fd, bpid); + DPAA2_SET_FLE_BPID(fle, bpid); + DPAA2_SET_FLE_BPID(fle + 1, bpid); + DPAA2_SET_FLE_BPID(sge, bpid); + DPAA2_SET_FLE_BPID(sge + 1, bpid); + } else { + DPAA2_SET_FD_IVP(fd); + DPAA2_SET_FLE_IVP(fle); + DPAA2_SET_FLE_IVP((fle + 1)); + DPAA2_SET_FLE_IVP(sge); + DPAA2_SET_FLE_IVP((sge + 1)); + } + + flc = &priv->flc_desc[0].flc; + DPAA2_SET_FD_ADDR(fd, DPAA2_VADDR_TO_IOVA(fle)); + DPAA2_SET_FD_LEN(fd, sym_op->cipher.data.length + + sym_op->cipher.iv.length); + DPAA2_SET_FD_COMPOUND_FMT(fd); + DPAA2_SET_FD_FLC(fd, DPAA2_VADDR_TO_IOVA(flc)); + + PMD_TX_LOG(DEBUG, "cipher_off: 0x%x/length %d,ivlen=%d data_off: 0x%x", + sym_op->cipher.data.offset, + sym_op->cipher.data.length, + sym_op->cipher.iv.length, + sym_op->m_src->data_off); + + DPAA2_SET_FLE_ADDR(fle, DPAA2_MBUF_VADDR_TO_IOVA(sym_op->m_src)); + DPAA2_SET_FLE_OFFSET(fle, sym_op->cipher.data.offset + + sym_op->m_src->data_off); + + fle->length = sym_op->cipher.data.length + sym_op->cipher.iv.length; + + PMD_TX_LOG(DEBUG, "1 - flc = %p, fle = %p FLEaddr = %x-%x, length %d", + flc, fle, fle->addr_hi, fle->addr_lo, fle->length); + + fle++; + + DPAA2_SET_FLE_ADDR(fle, DPAA2_VADDR_TO_IOVA(sge)); + fle->length = sym_op->cipher.data.length + sym_op->cipher.iv.length; + + DPAA2_SET_FLE_SG_EXT(fle); + + DPAA2_SET_FLE_ADDR(sge, DPAA2_VADDR_TO_IOVA(sym_op->cipher.iv.data)); + sge->length = sym_op->cipher.iv.length; + + sge++; + DPAA2_SET_FLE_ADDR(sge, DPAA2_MBUF_VADDR_TO_IOVA(sym_op->m_src)); + DPAA2_SET_FLE_OFFSET(sge, sym_op->cipher.data.offset + + sym_op->m_src->data_off); + + sge->length = sym_op->cipher.data.length; + DPAA2_SET_FLE_FIN(sge); + DPAA2_SET_FLE_FIN(fle); + + PMD_TX_LOG(DEBUG, "fdaddr =%p bpid =%d meta =%d off =%d, len =%d", + (void *)DPAA2_GET_FD_ADDR(fd), + DPAA2_GET_FD_BPID(fd), + rte_dpaa2_bpid_info[bpid].meta_data_size, + DPAA2_GET_FD_OFFSET(fd), + DPAA2_GET_FD_LEN(fd)); + + return 0; +} + +static inline int +build_sec_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op, + struct qbman_fd *fd, uint16_t bpid) +{ + int ret = -1; + + PMD_INIT_FUNC_TRACE(); + + switch (sess->ctxt_type) { + case DPAA2_SEC_CIPHER: + ret = build_cipher_fd(sess, op, fd, bpid); + break; + case DPAA2_SEC_AUTH: + ret = build_auth_fd(sess, op, fd, bpid); + break; + case DPAA2_SEC_CIPHER_HASH: + ret = build_authenc_fd(sess, op, fd, bpid); + break; + case DPAA2_SEC_HASH_CIPHER: + default: + RTE_LOG(ERR, PMD, "error: Unsupported session\n"); + } + return ret; +} + +static uint16_t +dpaa2_sec_enqueue_burst(void *qp, struct rte_crypto_op **ops, + uint16_t nb_ops) +{ + /* Function to transmit the frames to given device and VQ*/ + uint32_t loop; + int32_t ret; + struct qbman_fd fd_arr[MAX_TX_RING_SLOTS]; + uint32_t frames_to_send; + struct qbman_eq_desc eqdesc; + struct dpaa2_sec_qp *dpaa2_qp = (struct dpaa2_sec_qp *)qp; + struct qbman_swp *swp; + uint16_t num_tx = 0; + /*todo - need to support multiple buffer pools */ + uint16_t bpid; + struct rte_mempool *mb_pool; + dpaa2_sec_session *sess; + + if (unlikely(nb_ops == 0)) + return 0; + + if (ops[0]->sym->sess_type != RTE_CRYPTO_SYM_OP_WITH_SESSION) { + RTE_LOG(ERR, PMD, "sessionless crypto op not supported\n"); + return 0; + } + /*Prepare enqueue descriptor*/ + qbman_eq_desc_clear(&eqdesc); + qbman_eq_desc_set_no_orp(&eqdesc, DPAA2_EQ_RESP_ERR_FQ); + qbman_eq_desc_set_response(&eqdesc, 0, 0); + qbman_eq_desc_set_fq(&eqdesc, dpaa2_qp->tx_vq.fqid); + + if (!DPAA2_PER_LCORE_SEC_DPIO) { + ret = dpaa2_affine_qbman_swp_sec(); + if (ret) { + RTE_LOG(ERR, PMD, "Failure in affining portal\n"); + return 0; + } + } + swp = DPAA2_PER_LCORE_SEC_PORTAL; + + while (nb_ops) { + frames_to_send = (nb_ops >> 3) ? MAX_TX_RING_SLOTS : nb_ops; + + for (loop = 0; loop < frames_to_send; loop++) { + /*Clear the unused FD fields before sending*/ + memset(&fd_arr[loop], 0, sizeof(struct qbman_fd)); + sess = (dpaa2_sec_session *) + (*ops)->sym->session->_private; + mb_pool = (*ops)->sym->m_src->pool; + bpid = mempool_to_bpid(mb_pool); + ret = build_sec_fd(sess, *ops, &fd_arr[loop], bpid); + if (ret) { + PMD_DRV_LOG(ERR, "error: Improper packet" + " contents for crypto operation\n"); + goto skip_tx; + } + ops++; + } + loop = 0; + while (loop < frames_to_send) { + loop += qbman_swp_send_multiple(swp, &eqdesc, + &fd_arr[loop], + frames_to_send - loop); + } + + num_tx += frames_to_send; + nb_ops -= frames_to_send; + } +skip_tx: + dpaa2_qp->tx_vq.tx_pkts += num_tx; + dpaa2_qp->tx_vq.err_pkts += nb_ops; + return num_tx; +} + +static inline struct rte_crypto_op * +sec_fd_to_mbuf(const struct qbman_fd *fd) +{ + struct qbman_fle *fle; + struct rte_crypto_op *op; + + fle = (struct qbman_fle *)DPAA2_IOVA_TO_VADDR(DPAA2_GET_FD_ADDR(fd)); + + PMD_RX_LOG(DEBUG, "FLE addr = %x - %x, offset = %x", + fle->addr_hi, fle->addr_lo, fle->fin_bpid_offset); + + /* we are using the first FLE entry to store Mbuf. + * Currently we donot know which FLE has the mbuf stored. + * So while retreiving we can go back 1 FLE from the FD -ADDR + * to get the MBUF Addr from the previous FLE. + * We can have a better approach to use the inline Mbuf + */ + + if (unlikely(DPAA2_GET_FD_IVP(fd))) { + /* TODO complete it. */ + RTE_LOG(ERR, PMD, "error: Non inline buffer - WHAT to DO?"); + return NULL; + } + op = (struct rte_crypto_op *)DPAA2_IOVA_TO_VADDR( + DPAA2_GET_FLE_ADDR((fle - 1))); + + /* Prefeth op */ + rte_prefetch0(op->sym->m_src); + + PMD_RX_LOG(DEBUG, "mbuf %p BMAN buf addr %p", + (void *)op->sym->m_src, op->sym->m_src->buf_addr); + + PMD_RX_LOG(DEBUG, "fdaddr =%p bpid =%d meta =%d off =%d, len =%d", + (void *)DPAA2_GET_FD_ADDR(fd), + DPAA2_GET_FD_BPID(fd), + rte_dpaa2_bpid_info[DPAA2_GET_FD_BPID(fd)].meta_data_size, + DPAA2_GET_FD_OFFSET(fd), + DPAA2_GET_FD_LEN(fd)); + + /* free the fle memory */ + rte_free(fle - 1); + + return op; +} + +static uint16_t +dpaa2_sec_dequeue_burst(void *qp, struct rte_crypto_op **ops, + uint16_t nb_ops) +{ + /* Function is responsible to receive frames for a given device and VQ*/ + struct dpaa2_sec_qp *dpaa2_qp = (struct dpaa2_sec_qp *)qp; + struct qbman_result *dq_storage; + uint32_t fqid = dpaa2_qp->rx_vq.fqid; + int ret, num_rx = 0; + uint8_t is_last = 0, status; + struct qbman_swp *swp; + const struct qbman_fd *fd; + struct qbman_pull_desc pulldesc; + + if (!DPAA2_PER_LCORE_SEC_DPIO) { + ret = dpaa2_affine_qbman_swp_sec(); + if (ret) { + RTE_LOG(ERR, PMD, "Failure in affining portal\n"); + return 0; + } + } + swp = DPAA2_PER_LCORE_SEC_PORTAL; + dq_storage = dpaa2_qp->rx_vq.q_storage->dq_storage[0]; + + qbman_pull_desc_clear(&pulldesc); + qbman_pull_desc_set_numframes(&pulldesc, + (nb_ops > DPAA2_DQRR_RING_SIZE) ? + DPAA2_DQRR_RING_SIZE : nb_ops); + qbman_pull_desc_set_fq(&pulldesc, fqid); + qbman_pull_desc_set_storage(&pulldesc, dq_storage, + (dma_addr_t)DPAA2_VADDR_TO_IOVA(dq_storage), + 1); + + /*Issue a volatile dequeue command. */ + while (1) { + if (qbman_swp_pull(swp, &pulldesc)) { + RTE_LOG(WARNING, PMD, "SEC VDQ command is not issued." + "QBMAN is busy\n"); + /* Portal was busy, try again */ + continue; + } + break; + }; + + /* Receive the packets till Last Dequeue entry is found with + * respect to the above issues PULL command. + */ + while (!is_last) { + /* Check if the previous issued command is completed. + * Also seems like the SWP is shared between the Ethernet Driver + * and the SEC driver. + */ + while (!qbman_check_command_complete(swp, dq_storage)) + ; + + /* Loop until the dq_storage is updated with + * new token by QBMAN + */ + while (!qbman_result_has_new_result(swp, dq_storage)) + ; + /* Check whether Last Pull command is Expired and + * setting Condition for Loop termination + */ + if (qbman_result_DQ_is_pull_complete(dq_storage)) { + is_last = 1; + /* Check for valid frame. */ + status = (uint8_t)qbman_result_DQ_flags(dq_storage); + if (unlikely( + (status & QBMAN_DQ_STAT_VALIDFRAME) == 0)) { + PMD_RX_LOG(DEBUG, "No frame is delivered"); + continue; + } + } + + fd = qbman_result_DQ_fd(dq_storage); + ops[num_rx] = sec_fd_to_mbuf(fd); + + if (unlikely(fd->simple.frc)) { + /* TODO Parse SEC errors */ + RTE_LOG(ERR, PMD, "SEC returned Error - %x\n", + fd->simple.frc); + ops[num_rx]->status = RTE_CRYPTO_OP_STATUS_ERROR; + } else { + ops[num_rx]->status = RTE_CRYPTO_OP_STATUS_SUCCESS; + } + + num_rx++; + dq_storage++; + } /* End of Packet Rx loop */ + + dpaa2_qp->rx_vq.rx_pkts += num_rx; + + PMD_RX_LOG(DEBUG, "SEC Received %d Packets", num_rx); + /*Return the total number of packets received to DPAA2 app*/ + return num_rx; +} + +/** Release queue pair */ +static int +dpaa2_sec_queue_pair_release(struct rte_cryptodev *dev, uint16_t queue_pair_id) +{ + struct dpaa2_sec_qp *qp = + (struct dpaa2_sec_qp *)dev->data->queue_pairs[queue_pair_id]; + + PMD_INIT_FUNC_TRACE(); + + if (qp->rx_vq.q_storage) { + dpaa2_free_dq_storage(qp->rx_vq.q_storage); + rte_free(qp->rx_vq.q_storage); + } + rte_free(qp); + + dev->data->queue_pairs[queue_pair_id] = NULL; + + return 0; +} + +/** Setup a queue pair */ +static int +dpaa2_sec_queue_pair_setup(struct rte_cryptodev *dev, uint16_t qp_id, + __rte_unused const struct rte_cryptodev_qp_conf *qp_conf, + __rte_unused int socket_id) +{ + struct dpaa2_sec_dev_private *priv = dev->data->dev_private; + struct dpaa2_sec_qp *qp; + struct fsl_mc_io *dpseci = (struct fsl_mc_io *)priv->hw; + struct dpseci_rx_queue_cfg cfg; + int32_t retcode; + + PMD_INIT_FUNC_TRACE(); + + /* If qp is already in use free ring memory and qp metadata. */ + if (dev->data->queue_pairs[qp_id] != NULL) { + PMD_DRV_LOG(INFO, "QP already setup"); + return 0; + } + + PMD_DRV_LOG(DEBUG, "dev =%p, queue =%d, conf =%p", + dev, qp_id, qp_conf); + + memset(&cfg, 0, sizeof(struct dpseci_rx_queue_cfg)); + + qp = rte_malloc(NULL, sizeof(struct dpaa2_sec_qp), + RTE_CACHE_LINE_SIZE); + if (!qp) { + RTE_LOG(ERR, PMD, "malloc failed for rx/tx queues\n"); + return -1; + } + + qp->rx_vq.dev = dev; + qp->tx_vq.dev = dev; + qp->rx_vq.q_storage = rte_malloc("sec dq storage", + sizeof(struct queue_storage_info_t), + RTE_CACHE_LINE_SIZE); + if (!qp->rx_vq.q_storage) { + RTE_LOG(ERR, PMD, "malloc failed for q_storage\n"); + return -1; + } + memset(qp->rx_vq.q_storage, 0, sizeof(struct queue_storage_info_t)); + + if (dpaa2_alloc_dq_storage(qp->rx_vq.q_storage)) { + RTE_LOG(ERR, PMD, "dpaa2_alloc_dq_storage failed\n"); + return -1; + } + + dev->data->queue_pairs[qp_id] = qp; + + cfg.options = cfg.options | DPSECI_QUEUE_OPT_USER_CTX; + cfg.user_ctx = (uint64_t)(&qp->rx_vq); + retcode = dpseci_set_rx_queue(dpseci, CMD_PRI_LOW, priv->token, + qp_id, &cfg); + return retcode; +} + +/** Start queue pair */ +static int +dpaa2_sec_queue_pair_start(__rte_unused struct rte_cryptodev *dev, + __rte_unused uint16_t queue_pair_id) +{ + PMD_INIT_FUNC_TRACE(); + + return 0; +} + +/** Stop queue pair */ +static int +dpaa2_sec_queue_pair_stop(__rte_unused struct rte_cryptodev *dev, + __rte_unused uint16_t queue_pair_id) +{ + PMD_INIT_FUNC_TRACE(); + + return 0; +} + +/** Return the number of allocated queue pairs */ +static uint32_t +dpaa2_sec_queue_pair_count(struct rte_cryptodev *dev) +{ + PMD_INIT_FUNC_TRACE(); + + return dev->data->nb_queue_pairs; +} + +/** Returns the size of the aesni gcm session structure */ +static unsigned int +dpaa2_sec_session_get_size(struct rte_cryptodev *dev __rte_unused) +{ + PMD_INIT_FUNC_TRACE(); + + return sizeof(dpaa2_sec_session); +} + +static void +dpaa2_sec_session_initialize(struct rte_mempool *mp __rte_unused, + void *sess __rte_unused) +{ + PMD_INIT_FUNC_TRACE(); +} + +static int +dpaa2_sec_cipher_init(struct rte_cryptodev *dev, + struct rte_crypto_sym_xform *xform, + dpaa2_sec_session *session) +{ + struct dpaa2_sec_cipher_ctxt *ctxt = &session->ext_params.cipher_ctxt; + struct alginfo cipherdata; + int bufsize, i; + struct ctxt_priv *priv; + struct sec_flow_context *flc; + + PMD_INIT_FUNC_TRACE(); + + /* For SEC CIPHER only one descriptor is required. */ + priv = (struct ctxt_priv *)rte_zmalloc(NULL, + sizeof(struct ctxt_priv) + sizeof(struct sec_flc_desc), + RTE_CACHE_LINE_SIZE); + if (priv == NULL) { + RTE_LOG(ERR, PMD, "No Memory for priv CTXT"); + return -1; + } + + flc = &priv->flc_desc[0].flc; + + session->cipher_key.data = rte_zmalloc(NULL, xform->cipher.key.length, + RTE_CACHE_LINE_SIZE); + if (session->cipher_key.data == NULL) { + RTE_LOG(ERR, PMD, "No Memory for cipher key"); + rte_free(priv); + return -1; + } + session->cipher_key.length = xform->cipher.key.length; + + memcpy(session->cipher_key.data, xform->cipher.key.data, + xform->cipher.key.length); + cipherdata.key = (uint64_t)session->cipher_key.data; + cipherdata.keylen = session->cipher_key.length; + cipherdata.key_enc_flags = 0; + cipherdata.key_type = RTA_DATA_IMM; + + switch (xform->cipher.algo) { + case RTE_CRYPTO_CIPHER_AES_CBC: + cipherdata.algtype = OP_ALG_ALGSEL_AES; + cipherdata.algmode = OP_ALG_AAI_CBC; + session->cipher_alg = RTE_CRYPTO_CIPHER_AES_CBC; + ctxt->iv.length = AES_CBC_IV_LEN; + break; + case RTE_CRYPTO_CIPHER_3DES_CBC: + cipherdata.algtype = OP_ALG_ALGSEL_3DES; + cipherdata.algmode = OP_ALG_AAI_CBC; + session->cipher_alg = RTE_CRYPTO_CIPHER_3DES_CBC; + ctxt->iv.length = TDES_CBC_IV_LEN; + break; + case RTE_CRYPTO_CIPHER_AES_CTR: + case RTE_CRYPTO_CIPHER_3DES_CTR: + case RTE_CRYPTO_CIPHER_AES_GCM: + case RTE_CRYPTO_CIPHER_AES_CCM: + case RTE_CRYPTO_CIPHER_AES_ECB: + case RTE_CRYPTO_CIPHER_3DES_ECB: + case RTE_CRYPTO_CIPHER_AES_XTS: + case RTE_CRYPTO_CIPHER_AES_F8: + case RTE_CRYPTO_CIPHER_ARC4: + case RTE_CRYPTO_CIPHER_KASUMI_F8: + case RTE_CRYPTO_CIPHER_SNOW3G_UEA2: + case RTE_CRYPTO_CIPHER_ZUC_EEA3: + case RTE_CRYPTO_CIPHER_NULL: + RTE_LOG(ERR, PMD, "Crypto: Unsupported Cipher alg %u", + xform->cipher.algo); + goto error_out; + default: + RTE_LOG(ERR, PMD, "Crypto: Undefined Cipher specified %u\n", + xform->cipher.algo); + goto error_out; + } + session->dir = (xform->cipher.op == RTE_CRYPTO_CIPHER_OP_ENCRYPT) ? + DIR_ENC : DIR_DEC; + + bufsize = cnstr_shdsc_blkcipher(priv->flc_desc[0].desc, 1, 0, + &cipherdata, NULL, ctxt->iv.length, + session->dir); + if (bufsize < 0) { + RTE_LOG(ERR, PMD, "Crypto: Descriptor build failed\n"); + goto error_out; + } + flc->dhr = 0; + flc->bpv0 = 0x1; + flc->mode_bits = 0x8000; + + flc->word1_sdl = (uint8_t)bufsize; + flc->word2_rflc_31_0 = lower_32_bits( + (uint64_t)&(((struct dpaa2_sec_qp *) + dev->data->queue_pairs[0])->rx_vq)); + flc->word3_rflc_63_32 = upper_32_bits( + (uint64_t)&(((struct dpaa2_sec_qp *) + dev->data->queue_pairs[0])->rx_vq)); + session->ctxt = priv; + + for (i = 0; i < bufsize; i++) + PMD_DRV_LOG(DEBUG, "DESC[%d]:0x%x\n", + i, priv->flc_desc[0].desc[i]); + + return 0; + +error_out: + rte_free(session->cipher_key.data); + rte_free(priv); + return -1; +} + +static int +dpaa2_sec_auth_init(struct rte_cryptodev *dev, + struct rte_crypto_sym_xform *xform, + dpaa2_sec_session *session) +{ + struct dpaa2_sec_auth_ctxt *ctxt = &session->ext_params.auth_ctxt; + struct alginfo authdata; + unsigned int bufsize; + struct ctxt_priv *priv; + struct sec_flow_context *flc; + + PMD_INIT_FUNC_TRACE(); + + /* For SEC AUTH three descriptors are required for various stages */ + priv = (struct ctxt_priv *)rte_zmalloc(NULL, + sizeof(struct ctxt_priv) + 3 * + sizeof(struct sec_flc_desc), + RTE_CACHE_LINE_SIZE); + if (priv == NULL) { + RTE_LOG(ERR, PMD, "No Memory for priv CTXT"); + return -1; + } + + flc = &priv->flc_desc[DESC_INITFINAL].flc; + + session->auth_key.data = rte_zmalloc(NULL, xform->auth.key.length, + RTE_CACHE_LINE_SIZE); + if (session->auth_key.data == NULL) { + RTE_LOG(ERR, PMD, "No Memory for auth key"); + rte_free(priv); + return -1; + } + session->auth_key.length = xform->auth.key.length; + + memcpy(session->auth_key.data, xform->auth.key.data, + xform->auth.key.length); + authdata.key = (uint64_t)session->auth_key.data; + authdata.keylen = session->auth_key.length; + authdata.key_enc_flags = 0; + authdata.key_type = RTA_DATA_IMM; + + switch (xform->auth.algo) { + case RTE_CRYPTO_AUTH_SHA1_HMAC: + authdata.algtype = OP_ALG_ALGSEL_SHA1; + authdata.algmode = OP_ALG_AAI_HMAC; + session->auth_alg = RTE_CRYPTO_AUTH_SHA1_HMAC; + break; + case RTE_CRYPTO_AUTH_MD5_HMAC: + authdata.algtype = OP_ALG_ALGSEL_MD5; + authdata.algmode = OP_ALG_AAI_HMAC; + session->auth_alg = RTE_CRYPTO_AUTH_MD5_HMAC; + break; + case RTE_CRYPTO_AUTH_SHA256_HMAC: + authdata.algtype = OP_ALG_ALGSEL_SHA256; + authdata.algmode = OP_ALG_AAI_HMAC; + session->auth_alg = RTE_CRYPTO_AUTH_SHA256_HMAC; + break; + case RTE_CRYPTO_AUTH_SHA384_HMAC: + authdata.algtype = OP_ALG_ALGSEL_SHA384; + authdata.algmode = OP_ALG_AAI_HMAC; + session->auth_alg = RTE_CRYPTO_AUTH_SHA384_HMAC; + break; + case RTE_CRYPTO_AUTH_SHA512_HMAC: + authdata.algtype = OP_ALG_ALGSEL_SHA512; + authdata.algmode = OP_ALG_AAI_HMAC; + session->auth_alg = RTE_CRYPTO_AUTH_SHA512_HMAC; + break; + case RTE_CRYPTO_AUTH_SHA224_HMAC: + authdata.algtype = OP_ALG_ALGSEL_SHA224; + authdata.algmode = OP_ALG_AAI_HMAC; + session->auth_alg = RTE_CRYPTO_AUTH_SHA224_HMAC; + break; + case RTE_CRYPTO_AUTH_AES_XCBC_MAC: + case RTE_CRYPTO_AUTH_AES_GCM: + case RTE_CRYPTO_AUTH_SNOW3G_UIA2: + case RTE_CRYPTO_AUTH_NULL: + case RTE_CRYPTO_AUTH_SHA1: + case RTE_CRYPTO_AUTH_SHA256: + case RTE_CRYPTO_AUTH_SHA512: + case RTE_CRYPTO_AUTH_SHA224: + case RTE_CRYPTO_AUTH_SHA384: + case RTE_CRYPTO_AUTH_MD5: + case RTE_CRYPTO_AUTH_AES_CCM: + case RTE_CRYPTO_AUTH_AES_GMAC: + case RTE_CRYPTO_AUTH_KASUMI_F9: + case RTE_CRYPTO_AUTH_AES_CMAC: + case RTE_CRYPTO_AUTH_AES_CBC_MAC: + case RTE_CRYPTO_AUTH_ZUC_EIA3: + RTE_LOG(ERR, PMD, "Crypto: Unsupported auth alg %u", + xform->auth.algo); + goto error_out; + default: + RTE_LOG(ERR, PMD, "Crypto: Undefined Auth specified %u\n", + xform->auth.algo); + goto error_out; + } + session->dir = (xform->auth.op == RTE_CRYPTO_AUTH_OP_GENERATE) ? + DIR_ENC : DIR_DEC; + + bufsize = cnstr_shdsc_hmac(priv->flc_desc[DESC_INITFINAL].desc, + 1, 0, &authdata, !session->dir, + ctxt->trunc_len); + + flc->word1_sdl = (uint8_t)bufsize; + flc->word2_rflc_31_0 = lower_32_bits( + (uint64_t)&(((struct dpaa2_sec_qp *) + dev->data->queue_pairs[0])->rx_vq)); + flc->word3_rflc_63_32 = upper_32_bits( + (uint64_t)&(((struct dpaa2_sec_qp *) + dev->data->queue_pairs[0])->rx_vq)); + session->ctxt = priv; + + return 0; + +error_out: + rte_free(session->auth_key.data); + rte_free(priv); + return -1; +} + +static int +dpaa2_sec_aead_init(struct rte_cryptodev *dev, + struct rte_crypto_sym_xform *xform, + dpaa2_sec_session *session) +{ + struct dpaa2_sec_aead_ctxt *ctxt = &session->ext_params.aead_ctxt; + struct alginfo authdata, cipherdata; + unsigned int bufsize; + struct ctxt_priv *priv; + struct sec_flow_context *flc; + struct rte_crypto_cipher_xform *cipher_xform; + struct rte_crypto_auth_xform *auth_xform; + int err; + + PMD_INIT_FUNC_TRACE(); + + if (session->ext_params.aead_ctxt.auth_cipher_text) { + cipher_xform = &xform->cipher; + auth_xform = &xform->next->auth; + session->ctxt_type = + (cipher_xform->op == RTE_CRYPTO_CIPHER_OP_ENCRYPT) ? + DPAA2_SEC_CIPHER_HASH : DPAA2_SEC_HASH_CIPHER; + } else { + cipher_xform = &xform->next->cipher; + auth_xform = &xform->auth; + session->ctxt_type = + (cipher_xform->op == RTE_CRYPTO_CIPHER_OP_ENCRYPT) ? + DPAA2_SEC_HASH_CIPHER : DPAA2_SEC_CIPHER_HASH; + } + /* For SEC AEAD only one descriptor is required */ + priv = (struct ctxt_priv *)rte_zmalloc(NULL, + sizeof(struct ctxt_priv) + sizeof(struct sec_flc_desc), + RTE_CACHE_LINE_SIZE); + if (priv == NULL) { + RTE_LOG(ERR, PMD, "No Memory for priv CTXT"); + return -1; + } + + flc = &priv->flc_desc[0].flc; + + session->cipher_key.data = rte_zmalloc(NULL, cipher_xform->key.length, + RTE_CACHE_LINE_SIZE); + if (session->cipher_key.data == NULL && cipher_xform->key.length > 0) { + RTE_LOG(ERR, PMD, "No Memory for cipher key"); + rte_free(priv); + return -1; + } + session->cipher_key.length = cipher_xform->key.length; + session->auth_key.data = rte_zmalloc(NULL, auth_xform->key.length, + RTE_CACHE_LINE_SIZE); + if (session->auth_key.data == NULL && auth_xform->key.length > 0) { + RTE_LOG(ERR, PMD, "No Memory for auth key"); + rte_free(session->cipher_key.data); + rte_free(priv); + return -1; + } + session->auth_key.length = auth_xform->key.length; + memcpy(session->cipher_key.data, cipher_xform->key.data, + cipher_xform->key.length); + memcpy(session->auth_key.data, auth_xform->key.data, + auth_xform->key.length); + + ctxt->trunc_len = auth_xform->digest_length; + authdata.key = (uint64_t)session->auth_key.data; + authdata.keylen = session->auth_key.length; + authdata.key_enc_flags = 0; + authdata.key_type = RTA_DATA_IMM; + + switch (auth_xform->algo) { + case RTE_CRYPTO_AUTH_SHA1_HMAC: + authdata.algtype = OP_ALG_ALGSEL_SHA1; + authdata.algmode = OP_ALG_AAI_HMAC; + session->auth_alg = RTE_CRYPTO_AUTH_SHA1_HMAC; + break; + case RTE_CRYPTO_AUTH_MD5_HMAC: + authdata.algtype = OP_ALG_ALGSEL_MD5; + authdata.algmode = OP_ALG_AAI_HMAC; + session->auth_alg = RTE_CRYPTO_AUTH_MD5_HMAC; + break; + case RTE_CRYPTO_AUTH_SHA224_HMAC: + authdata.algtype = OP_ALG_ALGSEL_SHA224; + authdata.algmode = OP_ALG_AAI_HMAC; + session->auth_alg = RTE_CRYPTO_AUTH_SHA224_HMAC; + break; + case RTE_CRYPTO_AUTH_SHA256_HMAC: + authdata.algtype = OP_ALG_ALGSEL_SHA256; + authdata.algmode = OP_ALG_AAI_HMAC; + session->auth_alg = RTE_CRYPTO_AUTH_SHA256_HMAC; + break; + case RTE_CRYPTO_AUTH_SHA384_HMAC: + authdata.algtype = OP_ALG_ALGSEL_SHA384; + authdata.algmode = OP_ALG_AAI_HMAC; + session->auth_alg = RTE_CRYPTO_AUTH_SHA384_HMAC; + break; + case RTE_CRYPTO_AUTH_SHA512_HMAC: + authdata.algtype = OP_ALG_ALGSEL_SHA512; + authdata.algmode = OP_ALG_AAI_HMAC; + session->auth_alg = RTE_CRYPTO_AUTH_SHA512_HMAC; + break; + case RTE_CRYPTO_AUTH_AES_XCBC_MAC: + case RTE_CRYPTO_AUTH_AES_GCM: + case RTE_CRYPTO_AUTH_SNOW3G_UIA2: + case RTE_CRYPTO_AUTH_NULL: + case RTE_CRYPTO_AUTH_SHA1: + case RTE_CRYPTO_AUTH_SHA256: + case RTE_CRYPTO_AUTH_SHA512: + case RTE_CRYPTO_AUTH_SHA224: + case RTE_CRYPTO_AUTH_SHA384: + case RTE_CRYPTO_AUTH_MD5: + case RTE_CRYPTO_AUTH_AES_CCM: + case RTE_CRYPTO_AUTH_AES_GMAC: + case RTE_CRYPTO_AUTH_KASUMI_F9: + case RTE_CRYPTO_AUTH_AES_CMAC: + case RTE_CRYPTO_AUTH_AES_CBC_MAC: + case RTE_CRYPTO_AUTH_ZUC_EIA3: + RTE_LOG(ERR, PMD, "Crypto: Unsupported auth alg %u", + auth_xform->algo); + goto error_out; + default: + RTE_LOG(ERR, PMD, "Crypto: Undefined Auth specified %u\n", + auth_xform->algo); + goto error_out; + } + cipherdata.key = (uint64_t)session->cipher_key.data; + cipherdata.keylen = session->cipher_key.length; + cipherdata.key_enc_flags = 0; + cipherdata.key_type = RTA_DATA_IMM; + + switch (cipher_xform->algo) { + case RTE_CRYPTO_CIPHER_AES_CBC: + cipherdata.algtype = OP_ALG_ALGSEL_AES; + cipherdata.algmode = OP_ALG_AAI_CBC; + session->cipher_alg = RTE_CRYPTO_CIPHER_AES_CBC; + ctxt->iv.length = AES_CBC_IV_LEN; + break; + case RTE_CRYPTO_CIPHER_3DES_CBC: + cipherdata.algtype = OP_ALG_ALGSEL_3DES; + cipherdata.algmode = OP_ALG_AAI_CBC; + session->cipher_alg = RTE_CRYPTO_CIPHER_3DES_CBC; + ctxt->iv.length = TDES_CBC_IV_LEN; + break; + case RTE_CRYPTO_CIPHER_AES_GCM: + case RTE_CRYPTO_CIPHER_SNOW3G_UEA2: + case RTE_CRYPTO_CIPHER_NULL: + case RTE_CRYPTO_CIPHER_3DES_ECB: + case RTE_CRYPTO_CIPHER_AES_ECB: + case RTE_CRYPTO_CIPHER_AES_CTR: + case RTE_CRYPTO_CIPHER_AES_CCM: + case RTE_CRYPTO_CIPHER_KASUMI_F8: + RTE_LOG(ERR, PMD, "Crypto: Unsupported Cipher alg %u", + cipher_xform->algo); + goto error_out; + default: + RTE_LOG(ERR, PMD, "Crypto: Undefined Cipher specified %u\n", + cipher_xform->algo); + goto error_out; + } + session->dir = (cipher_xform->op == RTE_CRYPTO_CIPHER_OP_ENCRYPT) ? + DIR_ENC : DIR_DEC; + + priv->flc_desc[0].desc[0] = cipherdata.keylen; + priv->flc_desc[0].desc[1] = authdata.keylen; + err = rta_inline_query(IPSEC_AUTH_VAR_AES_DEC_BASE_DESC_LEN, + MIN_JOB_DESC_SIZE, + (unsigned int *)priv->flc_desc[0].desc, + &priv->flc_desc[0].desc[2], 2); + + if (err < 0) { + PMD_DRV_LOG(ERR, "Crypto: Incorrect key lengths"); + goto error_out; + } + if (priv->flc_desc[0].desc[2] & 1) { + cipherdata.key_type = RTA_DATA_IMM; + } else { + cipherdata.key = DPAA2_VADDR_TO_IOVA(cipherdata.key); + cipherdata.key_type = RTA_DATA_PTR; + } + if (priv->flc_desc[0].desc[2] & (1 << 1)) { + authdata.key_type = RTA_DATA_IMM; + } else { + authdata.key = DPAA2_VADDR_TO_IOVA(authdata.key); + authdata.key_type = RTA_DATA_PTR; + } + priv->flc_desc[0].desc[0] = 0; + priv->flc_desc[0].desc[1] = 0; + priv->flc_desc[0].desc[2] = 0; + + if (session->ctxt_type == DPAA2_SEC_CIPHER_HASH) { + bufsize = cnstr_shdsc_authenc(priv->flc_desc[0].desc, 1, + 0, &cipherdata, &authdata, + ctxt->iv.length, + ctxt->auth_only_len, + ctxt->trunc_len, + session->dir); + } else { + RTE_LOG(ERR, PMD, "Hash before cipher not supported"); + goto error_out; + } + + flc->word1_sdl = (uint8_t)bufsize; + flc->word2_rflc_31_0 = lower_32_bits( + (uint64_t)&(((struct dpaa2_sec_qp *) + dev->data->queue_pairs[0])->rx_vq)); + flc->word3_rflc_63_32 = upper_32_bits( + (uint64_t)&(((struct dpaa2_sec_qp *) + dev->data->queue_pairs[0])->rx_vq)); + session->ctxt = priv; + + return 0; + +error_out: + rte_free(session->cipher_key.data); + rte_free(session->auth_key.data); + rte_free(priv); + return -1; +} + +static void * +dpaa2_sec_session_configure(struct rte_cryptodev *dev, + struct rte_crypto_sym_xform *xform, void *sess) +{ + dpaa2_sec_session *session = sess; + + PMD_INIT_FUNC_TRACE(); + + if (unlikely(sess == NULL)) { + RTE_LOG(ERR, PMD, "invalid session struct"); + return NULL; + } + /* Cipher Only */ + if (xform->type == RTE_CRYPTO_SYM_XFORM_CIPHER && xform->next == NULL) { + session->ctxt_type = DPAA2_SEC_CIPHER; + dpaa2_sec_cipher_init(dev, xform, session); + + /* Authentication Only */ + } else if (xform->type == RTE_CRYPTO_SYM_XFORM_AUTH && + xform->next == NULL) { + session->ctxt_type = DPAA2_SEC_AUTH; + dpaa2_sec_auth_init(dev, xform, session); + + /* Cipher then Authenticate */ + } else if (xform->type == RTE_CRYPTO_SYM_XFORM_CIPHER && + xform->next->type == RTE_CRYPTO_SYM_XFORM_AUTH) { + session->ext_params.aead_ctxt.auth_cipher_text = true; + dpaa2_sec_aead_init(dev, xform, session); + + /* Authenticate then Cipher */ + } else if (xform->type == RTE_CRYPTO_SYM_XFORM_AUTH && + xform->next->type == RTE_CRYPTO_SYM_XFORM_CIPHER) { + session->ext_params.aead_ctxt.auth_cipher_text = false; + dpaa2_sec_aead_init(dev, xform, session); + } else { + RTE_LOG(ERR, PMD, "Invalid crypto type"); + return NULL; + } + + return session; +} + +/** Clear the memory of session so it doesn't leave key material behind */ +static void +dpaa2_sec_session_clear(struct rte_cryptodev *dev __rte_unused, void *sess) +{ + PMD_INIT_FUNC_TRACE(); + dpaa2_sec_session *s = (dpaa2_sec_session *)sess; + + if (s) { + rte_free(s->ctxt); + rte_free(s->cipher_key.data); + rte_free(s->auth_key.data); + memset(sess, 0, sizeof(dpaa2_sec_session)); + } +} + +static int +dpaa2_sec_dev_configure(struct rte_cryptodev *dev __rte_unused, + struct rte_cryptodev_config *config __rte_unused) +{ + PMD_INIT_FUNC_TRACE(); + + return -ENOTSUP; +} + +static int +dpaa2_sec_dev_start(struct rte_cryptodev *dev) +{ + struct dpaa2_sec_dev_private *priv = dev->data->dev_private; + struct fsl_mc_io *dpseci = (struct fsl_mc_io *)priv->hw; + struct dpseci_attr attr; + struct dpaa2_queue *dpaa2_q; + struct dpaa2_sec_qp **qp = (struct dpaa2_sec_qp **) + dev->data->queue_pairs; + struct dpseci_rx_queue_attr rx_attr; + struct dpseci_tx_queue_attr tx_attr; + int ret, i; + + PMD_INIT_FUNC_TRACE(); + + memset(&attr, 0, sizeof(struct dpseci_attr)); + + ret = dpseci_enable(dpseci, CMD_PRI_LOW, priv->token); + if (ret) { + PMD_INIT_LOG(ERR, "DPSECI with HW_ID = %d ENABLE FAILED\n", + priv->hw_id); + goto get_attr_failure; + } + ret = dpseci_get_attributes(dpseci, CMD_PRI_LOW, priv->token, &attr); + if (ret) { + PMD_INIT_LOG(ERR, + "DPSEC ATTRIBUTE READ FAILED, disabling DPSEC\n"); + goto get_attr_failure; + } + for (i = 0; i < attr.num_rx_queues && qp[i]; i++) { + dpaa2_q = &qp[i]->rx_vq; + dpseci_get_rx_queue(dpseci, CMD_PRI_LOW, priv->token, i, + &rx_attr); + dpaa2_q->fqid = rx_attr.fqid; + PMD_INIT_LOG(DEBUG, "rx_fqid: %d", dpaa2_q->fqid); + } + for (i = 0; i < attr.num_tx_queues && qp[i]; i++) { + dpaa2_q = &qp[i]->tx_vq; + dpseci_get_tx_queue(dpseci, CMD_PRI_LOW, priv->token, i, + &tx_attr); + dpaa2_q->fqid = tx_attr.fqid; + PMD_INIT_LOG(DEBUG, "tx_fqid: %d", dpaa2_q->fqid); + } + + return 0; +get_attr_failure: + dpseci_disable(dpseci, CMD_PRI_LOW, priv->token); + return -1; +} + +static void +dpaa2_sec_dev_stop(struct rte_cryptodev *dev) +{ + struct dpaa2_sec_dev_private *priv = dev->data->dev_private; + struct fsl_mc_io *dpseci = (struct fsl_mc_io *)priv->hw; + int ret; + + PMD_INIT_FUNC_TRACE(); + + ret = dpseci_disable(dpseci, CMD_PRI_LOW, priv->token); + if (ret) { + PMD_INIT_LOG(ERR, "Failure in disabling dpseci %d device", + priv->hw_id); + return; + } + + ret = dpseci_reset(dpseci, CMD_PRI_LOW, priv->token); + if (ret < 0) { + PMD_INIT_LOG(ERR, "SEC Device cannot be reset:Error = %0x\n", + ret); + return; + } +} + +static int +dpaa2_sec_dev_close(struct rte_cryptodev *dev) +{ + struct dpaa2_sec_dev_private *priv = dev->data->dev_private; + struct fsl_mc_io *dpseci = (struct fsl_mc_io *)priv->hw; + int ret; + + PMD_INIT_FUNC_TRACE(); + + /* Function is reverse of dpaa2_sec_dev_init. + * It does the following: + * 1. Detach a DPSECI from attached resources i.e. buffer pools, dpbp_id + * 2. Close the DPSECI device + * 3. Free the allocated resources. + */ + + /*Close the device at underlying layer*/ + ret = dpseci_close(dpseci, CMD_PRI_LOW, priv->token); + if (ret) { + PMD_INIT_LOG(ERR, "Failure closing dpseci device with" + " error code %d\n", ret); + return -1; + } + + /*Free the allocated memory for ethernet private data and dpseci*/ + priv->hw = NULL; + free(dpseci); + + return 0; +} + +static void +dpaa2_sec_dev_infos_get(struct rte_cryptodev *dev, + struct rte_cryptodev_info *info) +{ + struct dpaa2_sec_dev_private *internals = dev->data->dev_private; + + PMD_INIT_FUNC_TRACE(); + if (info != NULL) { + info->max_nb_queue_pairs = internals->max_nb_queue_pairs; + info->feature_flags = dev->feature_flags; + info->capabilities = dpaa2_sec_capabilities; + info->sym.max_nb_sessions = internals->max_nb_sessions; + info->dev_type = RTE_CRYPTODEV_DPAA2_SEC_PMD; + } +} + +static +void dpaa2_sec_stats_get(struct rte_cryptodev *dev, + struct rte_cryptodev_stats *stats) +{ + struct dpaa2_sec_dev_private *priv = dev->data->dev_private; + struct fsl_mc_io *dpseci = (struct fsl_mc_io *)priv->hw; + struct dpseci_sec_counters counters = {0}; + struct dpaa2_sec_qp **qp = (struct dpaa2_sec_qp **) + dev->data->queue_pairs; + int ret, i; + + PMD_INIT_FUNC_TRACE(); + if (stats == NULL) { + PMD_DRV_LOG(ERR, "invalid stats ptr NULL"); + return; + } + for (i = 0; i < dev->data->nb_queue_pairs; i++) { + if (qp[i] == NULL) { + PMD_DRV_LOG(DEBUG, "Uninitialised queue pair"); + continue; + } + + stats->enqueued_count += qp[i]->tx_vq.tx_pkts; + stats->dequeued_count += qp[i]->rx_vq.rx_pkts; + stats->enqueue_err_count += qp[i]->tx_vq.err_pkts; + stats->dequeue_err_count += qp[i]->rx_vq.err_pkts; + } + + ret = dpseci_get_sec_counters(dpseci, CMD_PRI_LOW, priv->token, + &counters); + if (ret) { + PMD_DRV_LOG(ERR, "dpseci_get_sec_counters failed\n"); + } else { + PMD_DRV_LOG(INFO, "dpseci hw stats:" + "\n\tNumber of Requests Dequeued = %lu" + "\n\tNumber of Outbound Encrypt Requests = %lu" + "\n\tNumber of Inbound Decrypt Requests = %lu" + "\n\tNumber of Outbound Bytes Encrypted = %lu" + "\n\tNumber of Outbound Bytes Protected = %lu" + "\n\tNumber of Inbound Bytes Decrypted = %lu" + "\n\tNumber of Inbound Bytes Validated = %lu", + counters.dequeued_requests, + counters.ob_enc_requests, + counters.ib_dec_requests, + counters.ob_enc_bytes, + counters.ob_prot_bytes, + counters.ib_dec_bytes, + counters.ib_valid_bytes); + } +} + +static +void dpaa2_sec_stats_reset(struct rte_cryptodev *dev) +{ + int i; + struct dpaa2_sec_qp **qp = (struct dpaa2_sec_qp **) + (dev->data->queue_pairs); + + PMD_INIT_FUNC_TRACE(); + + for (i = 0; i < dev->data->nb_queue_pairs; i++) { + if (qp[i] == NULL) { + PMD_DRV_LOG(DEBUG, "Uninitialised queue pair"); + continue; + } + qp[i]->tx_vq.rx_pkts = 0; + qp[i]->tx_vq.tx_pkts = 0; + qp[i]->tx_vq.err_pkts = 0; + qp[i]->rx_vq.rx_pkts = 0; + qp[i]->rx_vq.tx_pkts = 0; + qp[i]->rx_vq.err_pkts = 0; + } +} + +static struct rte_cryptodev_ops crypto_ops = { + .dev_configure = dpaa2_sec_dev_configure, + .dev_start = dpaa2_sec_dev_start, + .dev_stop = dpaa2_sec_dev_stop, + .dev_close = dpaa2_sec_dev_close, + .dev_infos_get = dpaa2_sec_dev_infos_get, + .stats_get = dpaa2_sec_stats_get, + .stats_reset = dpaa2_sec_stats_reset, + .queue_pair_setup = dpaa2_sec_queue_pair_setup, + .queue_pair_release = dpaa2_sec_queue_pair_release, + .queue_pair_start = dpaa2_sec_queue_pair_start, + .queue_pair_stop = dpaa2_sec_queue_pair_stop, + .queue_pair_count = dpaa2_sec_queue_pair_count, + .session_get_size = dpaa2_sec_session_get_size, + .session_initialize = dpaa2_sec_session_initialize, + .session_configure = dpaa2_sec_session_configure, + .session_clear = dpaa2_sec_session_clear, +}; + +static int +dpaa2_sec_uninit(const struct rte_cryptodev_driver *crypto_drv __rte_unused, + struct rte_cryptodev *dev) +{ + PMD_INIT_LOG(INFO, "Closing DPAA2_SEC device %s on numa socket %u\n", + dev->data->name, rte_socket_id()); + + return 0; +} + +static int +dpaa2_sec_dev_init(struct rte_cryptodev *cryptodev) +{ + struct dpaa2_sec_dev_private *internals; + struct rte_device *dev = cryptodev->device; + struct rte_dpaa2_device *dpaa2_dev; + struct fsl_mc_io *dpseci; + uint16_t token; + struct dpseci_attr attr; + int retcode, hw_id; + + PMD_INIT_FUNC_TRACE(); + dpaa2_dev = container_of(dev, struct rte_dpaa2_device, device); + if (dpaa2_dev == NULL) { + PMD_INIT_LOG(ERR, "dpaa2_device not found\n"); + return -1; + } + hw_id = dpaa2_dev->object_id; + + cryptodev->dev_type = RTE_CRYPTODEV_DPAA2_SEC_PMD; + cryptodev->dev_ops = &crypto_ops; + + cryptodev->enqueue_burst = dpaa2_sec_enqueue_burst; + cryptodev->dequeue_burst = dpaa2_sec_dequeue_burst; + cryptodev->feature_flags = RTE_CRYPTODEV_FF_SYMMETRIC_CRYPTO | + RTE_CRYPTODEV_FF_HW_ACCELERATED | + RTE_CRYPTODEV_FF_SYM_OPERATION_CHAINING; + + internals = cryptodev->data->dev_private; + internals->max_nb_sessions = RTE_DPAA2_SEC_PMD_MAX_NB_SESSIONS; + + /* + * For secondary processes, we don't initialise any further as primary + * has already done this work. Only check we don't need a different + * RX function + */ + if (rte_eal_process_type() != RTE_PROC_PRIMARY) { + PMD_INIT_LOG(DEBUG, "Device already init by primary process"); + return 0; + } + /*Open the rte device via MC and save the handle for further use*/ + dpseci = (struct fsl_mc_io *)rte_calloc(NULL, 1, + sizeof(struct fsl_mc_io), 0); + if (!dpseci) { + PMD_INIT_LOG(ERR, + "Error in allocating the memory for dpsec object"); + return -1; + } + dpseci->regs = rte_mcp_ptr_list[0]; + + retcode = dpseci_open(dpseci, CMD_PRI_LOW, hw_id, &token); + if (retcode != 0) { + PMD_INIT_LOG(ERR, "Cannot open the dpsec device: Error = %x", + retcode); + goto init_error; + } + retcode = dpseci_get_attributes(dpseci, CMD_PRI_LOW, token, &attr); + if (retcode != 0) { + PMD_INIT_LOG(ERR, + "Cannot get dpsec device attributed: Error = %x", + retcode); + goto init_error; + } + sprintf(cryptodev->data->name, "dpsec-%u", hw_id); + + internals->max_nb_queue_pairs = attr.num_tx_queues; + cryptodev->data->nb_queue_pairs = internals->max_nb_queue_pairs; + internals->hw = dpseci; + internals->token = token; + + PMD_INIT_LOG(DEBUG, "driver %s: created\n", cryptodev->data->name); + return 0; + +init_error: + PMD_INIT_LOG(ERR, "driver %s: create failed\n", cryptodev->data->name); + + /* dpaa2_sec_uninit(crypto_dev_name); */ + return -EFAULT; +} + +static int +cryptodev_dpaa2_sec_probe(struct rte_dpaa2_driver *dpaa2_drv, + struct rte_dpaa2_device *dpaa2_dev) +{ + struct rte_cryptodev *cryptodev; + char cryptodev_name[RTE_CRYPTODEV_NAME_MAX_LEN]; + + int retval; + + sprintf(cryptodev_name, "dpsec-%d", dpaa2_dev->object_id); + + cryptodev = rte_cryptodev_pmd_allocate(cryptodev_name, rte_socket_id()); + if (cryptodev == NULL) + return -ENOMEM; + + if (rte_eal_process_type() == RTE_PROC_PRIMARY) { + cryptodev->data->dev_private = rte_zmalloc_socket( + "cryptodev private structure", + sizeof(struct dpaa2_sec_dev_private), + RTE_CACHE_LINE_SIZE, + rte_socket_id()); + + if (cryptodev->data->dev_private == NULL) + rte_panic("Cannot allocate memzone for private " + "device data"); + } + + dpaa2_dev->cryptodev = cryptodev; + cryptodev->device = &dpaa2_dev->device; + cryptodev->driver = (struct rte_cryptodev_driver *)dpaa2_drv; + + /* init user callbacks */ + TAILQ_INIT(&(cryptodev->link_intr_cbs)); + + /* Invoke PMD device initialization function */ + retval = dpaa2_sec_dev_init(cryptodev); + if (retval == 0) + return 0; + + if (rte_eal_process_type() == RTE_PROC_PRIMARY) + rte_free(cryptodev->data->dev_private); + + cryptodev->attached = RTE_CRYPTODEV_DETACHED; + + return -ENXIO; +} + +static int +cryptodev_dpaa2_sec_remove(struct rte_dpaa2_device *dpaa2_dev) +{ + struct rte_cryptodev *cryptodev; + int ret; + + cryptodev = dpaa2_dev->cryptodev; + if (cryptodev == NULL) + return -ENODEV; + + ret = dpaa2_sec_uninit(NULL, cryptodev); + if (ret) + return ret; + + /* free crypto device */ + rte_cryptodev_pmd_release_device(cryptodev); + + if (rte_eal_process_type() == RTE_PROC_PRIMARY) + rte_free(cryptodev->data->dev_private); + + cryptodev->device = NULL; + cryptodev->driver = NULL; + cryptodev->data = NULL; + + return 0; +} + +static struct rte_dpaa2_driver rte_dpaa2_sec_driver = { + .drv_type = DPAA2_MC_DPSECI_DEVID, + .driver = { + .name = "DPAA2 SEC PMD" + }, + .probe = cryptodev_dpaa2_sec_probe, + .remove = cryptodev_dpaa2_sec_remove, +}; + +RTE_PMD_REGISTER_DPAA2(dpaa2_sec_pmd, rte_dpaa2_sec_driver); |