New upstream version 18.05upstream-18.05-stable

Change-Id: Ib515da8d5db1114f07a5fe26239d1c2061007c1c
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>

5 files changed, 60 insertions, 12 deletions

diff --git a/drivers/mempool/dpaa/Makefile b/drivers/mempool/dpaa/Makefile
index 4c0d7aaa..da8da1e9 100644
--- a/drivers/mempool/dpaa/Makefile
+++ b/drivers/mempool/dpaa/Makefile
@@ -22,6 +22,9 @@ EXPORT_MAP := rte_mempool_dpaa_version.map
 # Lbrary version
 LIBABIVER := 1
 
+# depends on dpaa bus which uses experimental API
+CFLAGS += -DALLOW_EXPERIMENTAL_API
+
 # all source are stored in SRCS-y
 #
 SRCS-$(CONFIG_RTE_LIBRTE_DPAA_MEMPOOL) += dpaa_mempool.c
diff --git a/drivers/mempool/dpaa/dpaa_mempool.c b/drivers/mempool/dpaa/dpaa_mempool.c
index fb3b6ba0..10c536bf 100644
--- a/drivers/mempool/dpaa/dpaa_mempool.c
+++ b/drivers/mempool/dpaa/dpaa_mempool.c
@@ -27,6 +27,13 @@
 
 #include <dpaa_mempool.h>
 
+/* List of all the memseg information locally maintained in dpaa driver. This
+ * is to optimize the PA_to_VA searches until a better mechanism (algo) is
+ * available.
+ */
+struct dpaa_memseg_list rte_dpaa_memsegs
+	= TAILQ_HEAD_INITIALIZER(rte_dpaa_memsegs);
+
 struct dpaa_bp_info rte_dpaa_bpid_info[DPAA_MAX_BPOOLS];
 
 static int
@@ -115,7 +122,8 @@ dpaa_buf_free(struct dpaa_bp_info *bp_info, uint64_t addr)
 	struct bm_buffer buf;
 	int ret;
 
-	DPAA_MEMPOOL_DEBUG("Free 0x%lx to bpid: %d", addr, bp_info->bpid);
+	DPAA_MEMPOOL_DEBUG("Free 0x%" PRIx64 " to bpid: %d",
+			   addr, bp_info->bpid);
 
 	bm_buffer_set64(&buf, addr);
 retry:
@@ -154,8 +162,7 @@ dpaa_mbuf_free_bulk(struct rte_mempool *pool,
 		if (unlikely(!bp_info->ptov_off)) {
 			/* buffers are from single mem segment */
 			if (bp_info->flags & DPAA_MPOOL_SINGLE_SEGMENT) {
-				bp_info->ptov_off
-						= (uint64_t)obj_table[i] - phy;
+				bp_info->ptov_off = (size_t)obj_table[i] - phy;
 				rte_dpaa_bpid_info[bp_info->bpid].ptov_off
 						= bp_info->ptov_off;
 			}
@@ -264,10 +271,9 @@ dpaa_mbuf_get_count(const struct rte_mempool *mp)
 }
 
 static int
-dpaa_register_memory_area(const struct rte_mempool *mp,
-			  char *vaddr __rte_unused,
-			  rte_iova_t paddr __rte_unused,
-			  size_t len)
+dpaa_populate(struct rte_mempool *mp, unsigned int max_objs,
+	      void *vaddr, rte_iova_t paddr, size_t len,
+	      rte_mempool_populate_obj_cb_t *obj_cb, void *obj_cb_arg)
 {
 	struct dpaa_bp_info *bp_info;
 	unsigned int total_elt_sz;
@@ -282,14 +288,40 @@ dpaa_register_memory_area(const struct rte_mempool *mp,
 	bp_info = DPAA_MEMPOOL_TO_POOL_INFO(mp);
 	total_elt_sz = mp->header_size + mp->elt_size + mp->trailer_size;
 
-	DPAA_MEMPOOL_DEBUG("Req size %lu vs Available %u\n",
-			   len, total_elt_sz * mp->size);
+	DPAA_MEMPOOL_DEBUG("Req size %" PRIx64 " vs Available %u\n",
+			   (uint64_t)len, total_elt_sz * mp->size);
 
 	/* Detect pool area has sufficient space for elements in this memzone */
 	if (len >= total_elt_sz * mp->size)
 		bp_info->flags |= DPAA_MPOOL_SINGLE_SEGMENT;
+	struct dpaa_memseg *ms;
+
+	/* For each memory chunk pinned to the Mempool, a linked list of the
+	 * contained memsegs is created for searching when PA to VA
+	 * conversion is required.
+	 */
+	ms = rte_zmalloc(NULL, sizeof(struct dpaa_memseg), 0);
+	if (!ms) {
+		DPAA_MEMPOOL_ERR("Unable to allocate internal memory.");
+		DPAA_MEMPOOL_WARN("Fast Physical to Virtual Addr translation would not be available.");
+		/* If the element is not added, it would only lead to failure
+		 * in searching for the element and the logic would Fallback
+		 * to traditional DPDK memseg traversal code. So, this is not
+		 * a blocking error - but, error would be printed on screen.
+		 */
+		return 0;
+	}
 
-	return 0;
+	ms->vaddr = vaddr;
+	ms->iova = paddr;
+	ms->len = len;
+	/* Head insertions are generally faster than tail insertions as the
+	 * buffers pinned are picked from rear end.
+	 */
+	TAILQ_INSERT_HEAD(&rte_dpaa_memsegs, ms, next);
+
+	return rte_mempool_op_populate_default(mp, max_objs, vaddr, paddr, len,
+					       obj_cb, obj_cb_arg);
 }
 
 struct rte_mempool_ops dpaa_mpool_ops = {
@@ -299,7 +331,7 @@ struct rte_mempool_ops dpaa_mpool_ops = {
 	.enqueue = dpaa_mbuf_free_bulk,
 	.dequeue = dpaa_mbuf_alloc_bulk,
 	.get_count = dpaa_mbuf_get_count,
-	.register_memory_area = dpaa_register_memory_area,
+	.populate = dpaa_populate,
 };
 
 MEMPOOL_REGISTER_OPS(dpaa_mpool_ops);
diff --git a/drivers/mempool/dpaa/dpaa_mempool.h b/drivers/mempool/dpaa/dpaa_mempool.h
index 9435dd2f..092f326c 100644
--- a/drivers/mempool/dpaa/dpaa_mempool.h
+++ b/drivers/mempool/dpaa/dpaa_mempool.h
@@ -46,7 +46,7 @@ static inline void *
 DPAA_MEMPOOL_PTOV(struct dpaa_bp_info *bp_info, uint64_t addr)
 {
 	if (bp_info->ptov_off)
-		return ((void *)(addr + bp_info->ptov_off));
+		return ((void *) (size_t)(addr + bp_info->ptov_off));
 	return rte_dpaa_mem_ptov(addr);
 }
 
diff --git a/drivers/mempool/dpaa/meson.build b/drivers/mempool/dpaa/meson.build
new file mode 100644
index 00000000..9163b3db
--- /dev/null
+++ b/drivers/mempool/dpaa/meson.build
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright 2018 NXP
+
+if host_machine.system() != 'linux'
+        build = false
+endif
+
+deps += ['bus_dpaa']
+sources = files('dpaa_mempool.c')
+
+# depends on dpaa bus which uses experimental API
+allow_experimental_apis = true
diff --git a/drivers/mempool/dpaa/rte_mempool_dpaa_version.map b/drivers/mempool/dpaa/rte_mempool_dpaa_version.map
index d05f274d..60bf50b2 100644
--- a/drivers/mempool/dpaa/rte_mempool_dpaa_version.map
+++ b/drivers/mempool/dpaa/rte_mempool_dpaa_version.map
@@ -2,6 +2,7 @@ DPDK_17.11 {
 	global:
 
 	rte_dpaa_bpid_info;
+	rte_dpaa_memsegs;
 
 	local: *;
 };