diff options
author | 2018-11-01 11:59:50 +0000 | |
---|---|---|
committer | 2018-11-01 12:00:19 +0000 | |
commit | 8d01b9cd70a67cdafd5b965a70420c3bd7fb3f82 (patch) | |
tree | 208e3bc33c220854d89d010e3abf720a2e62e546 /drivers/net/bnx2x/elink.h | |
parent | b63264c8342e6a1b6971c79550d2af2024b6a4de (diff) |
New upstream version 18.11-rc1upstream/18.11-rc1
Change-Id: Iaa71986dd6332e878d8f4bf493101b2bbc6313bb
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
Diffstat (limited to 'drivers/net/bnx2x/elink.h')
-rw-r--r-- | drivers/net/bnx2x/elink.h | 236 |
1 files changed, 177 insertions, 59 deletions
diff --git a/drivers/net/bnx2x/elink.h b/drivers/net/bnx2x/elink.h index 40000c24..c8b08bc3 100644 --- a/drivers/net/bnx2x/elink.h +++ b/drivers/net/bnx2x/elink.h @@ -14,7 +14,7 @@ #ifndef ELINK_H #define ELINK_H -#define ELINK_DEBUG +#include "bnx2x_logs.h" @@ -29,6 +29,11 @@ struct bnx2x_softc; extern uint32_t elink_cb_reg_read(struct bnx2x_softc *sc, uint32_t reg_addr); extern void elink_cb_reg_write(struct bnx2x_softc *sc, uint32_t reg_addr, uint32_t val); +/* wb_write - pointer to 2 32 bits vars to be passed to the DMAE*/ +extern void elink_cb_reg_wb_write(struct bnx2x_softc *sc, uint32_t offset, + uint32_t *wb_write, uint16_t len); +extern void elink_cb_reg_wb_read(struct bnx2x_softc *sc, uint32_t offset, + uint32_t *wb_write, uint16_t len); /* mode - 0( LOW ) /1(HIGH)*/ extern uint8_t elink_cb_gpio_write(struct bnx2x_softc *sc, @@ -45,6 +50,9 @@ extern uint8_t elink_cb_gpio_int_write(struct bnx2x_softc *sc, extern uint32_t elink_cb_fw_command(struct bnx2x_softc *sc, uint32_t command, uint32_t param); +/* Delay */ +extern void elink_cb_udelay(struct bnx2x_softc *sc, uint32_t microsecond); + /* This function is called every 1024 bytes downloading of phy firmware. Driver can use it to print to screen indication for download progress */ extern void elink_cb_download_progress(struct bnx2x_softc *sc, uint32_t cur, uint32_t total); @@ -69,6 +77,8 @@ typedef enum elink_status { extern void elink_cb_event_log(struct bnx2x_softc *sc, const elink_log_id_t log_id, ...); extern void elink_cb_load_warpcore_microcode(void); +extern uint8_t elink_cb_path_id(struct bnx2x_softc *sc); + extern void elink_cb_notify_link_changed(struct bnx2x_softc *sc); #define ELINK_EVENT_LOG_LEVEL_ERROR 1 @@ -78,6 +88,32 @@ extern void elink_cb_notify_link_changed(struct bnx2x_softc *sc); #define ARRAY_SIZE(x) (sizeof(x)/sizeof(x[0])) /* Debug prints */ +#ifdef ELINK_DEBUG + +extern void elink_cb_dbg(struct bnx2x_softc *sc, const char *fmt); +extern void elink_cb_dbg1(struct bnx2x_softc *sc, const char *fmt, + uint32_t arg1); +extern void elink_cb_dbg2(struct bnx2x_softc *sc, const char *fmt, + uint32_t arg1, uint32_t arg2); +extern void elink_cb_dbg3(struct bnx2x_softc *sc, const char *fmt, + uint32_t arg1, uint32_t arg2, + uint32_t arg3); + +#define ELINK_DEBUG_P0(sc, fmt) elink_cb_dbg(sc, fmt) +#define ELINK_DEBUG_P1(sc, fmt, arg1) elink_cb_dbg1(sc, fmt, arg1) +#define ELINK_DEBUG_P2(sc, fmt, arg1, arg2) \ + elink_cb_dbg2(sc, fmt, arg1, arg2) +#define ELINK_DEBUG_P3(sc, fmt, arg1, arg2, arg3) \ + elink_cb_dbg3(sc, fmt, arg1, arg2, arg3) +#else +#define ELINK_DEBUG_P0(sc, fmt) PMD_DRV_LOG(DEBUG, sc, fmt) +#define ELINK_DEBUG_P1(sc, fmt, arg1) \ + PMD_DRV_LOG(DEBUG, sc, fmt, arg1) +#define ELINK_DEBUG_P2(sc, fmt, arg1, arg2) \ + PMD_DRV_LOG(DEBUG, sc, fmt, arg1, arg2) +#define ELINK_DEBUG_P3(sc, fmt, arg1, arg2, arg3) \ + PMD_DRV_LOG(DEBUG, sc, fmt, arg1, arg2, arg3) +#endif /***********************************************************/ /* Defines */ @@ -126,9 +162,12 @@ extern void elink_cb_notify_link_changed(struct bnx2x_softc *sc); #define ELINK_SFP_EEPROM_DATE_SIZE 6 #define ELINK_SFP_EEPROM_DIAG_TYPE_ADDR 0x5c #define ELINK_SFP_EEPROM_DIAG_TYPE_SIZE 1 -#define ELINK_SFP_EEPROM_DIAG_ADDR_CHANGE_REQ (1<<2) +#define ELINK_SFP_EEPROM_DIAG_ADDR_CHANGE_REQ (1 << 2) #define ELINK_SFP_EEPROM_SFF_8472_COMP_ADDR 0x5e #define ELINK_SFP_EEPROM_SFF_8472_COMP_SIZE 1 +#define ELINK_SFP_EEPROM_VENDOR_SPECIFIC_ADDR 0x60 +#define ELINK_SFP_EEPROM_VENDOR_SPECIFIC_SIZE 16 + #define ELINK_SFP_EEPROM_A2_CHECKSUM_RANGE 0x5e #define ELINK_SFP_EEPROM_A2_CC_DMI_ADDR 0x5f @@ -199,7 +238,7 @@ typedef void (*link_reset_t)(struct elink_phy *phy, struct elink_params *params); typedef void (*config_loopback_t)(struct elink_phy *phy, struct elink_params *params); -typedef uint8_t (*format_fw_ver_t)(uint32_t raw, uint8_t *str, uint16_t *len); +typedef elink_status_t (*format_fw_ver_t)(uint32_t raw, uint8_t *str, uint16_t *len); typedef void (*hw_reset_t)(struct elink_phy *phy, struct elink_params *params); typedef void (*set_link_led_t)(struct elink_phy *phy, struct elink_params *params, uint8_t mode); @@ -219,23 +258,23 @@ struct elink_phy { uint8_t def_md_devad; uint16_t flags; /* No Over-Current detection */ -#define ELINK_FLAGS_NOC (1<<1) +#define ELINK_FLAGS_NOC (1 << 1) /* Fan failure detection required */ -#define ELINK_FLAGS_FAN_FAILURE_DET_REQ (1<<2) +#define ELINK_FLAGS_FAN_FAILURE_DET_REQ (1 << 2) /* Initialize first the XGXS and only then the phy itself */ -#define ELINK_FLAGS_INIT_XGXS_FIRST (1<<3) -#define ELINK_FLAGS_WC_DUAL_MODE (1<<4) -#define ELINK_FLAGS_4_PORT_MODE (1<<5) -#define ELINK_FLAGS_REARM_LATCH_SIGNAL (1<<6) -#define ELINK_FLAGS_SFP_NOT_APPROVED (1<<7) -#define ELINK_FLAGS_MDC_MDIO_WA (1<<8) -#define ELINK_FLAGS_DUMMY_READ (1<<9) -#define ELINK_FLAGS_MDC_MDIO_WA_B0 (1<<10) -#define ELINK_FLAGS_SFP_MODULE_PLUGGED_IN_WC (1<<11) -#define ELINK_FLAGS_TX_ERROR_CHECK (1<<12) -#define ELINK_FLAGS_EEE (1<<13) -#define ELINK_FLAGS_TEMPERATURE (1<<14) -#define ELINK_FLAGS_MDC_MDIO_WA_G (1<<15) +#define ELINK_FLAGS_INIT_XGXS_FIRST (1 << 3) +#define ELINK_FLAGS_WC_DUAL_MODE (1 << 4) +#define ELINK_FLAGS_4_PORT_MODE (1 << 5) +#define ELINK_FLAGS_REARM_LATCH_SIGNAL (1 << 6) +#define ELINK_FLAGS_SFP_NOT_APPROVED (1 << 7) +#define ELINK_FLAGS_MDC_MDIO_WA (1 << 8) +#define ELINK_FLAGS_DUMMY_READ (1 << 9) +#define ELINK_FLAGS_MDC_MDIO_WA_B0 (1 << 10) +#define ELINK_FLAGS_SFP_MODULE_PLUGGED_IN_WC (1 << 11) +#define ELINK_FLAGS_TX_ERROR_CHECK (1 << 12) +#define ELINK_FLAGS_EEE (1 << 13) +#define ELINK_FLAGS_TEMPERATURE (1 << 14) +#define ELINK_FLAGS_MDC_MDIO_WA_G (1 << 15) /* preemphasis values for the rx side */ uint16_t rx_preemphasis[4]; @@ -247,20 +286,22 @@ struct elink_phy { uint32_t mdio_ctrl; uint32_t supported; -#define ELINK_SUPPORTED_10baseT_Half (1<<0) -#define ELINK_SUPPORTED_10baseT_Full (1<<1) -#define ELINK_SUPPORTED_100baseT_Half (1<<2) -#define ELINK_SUPPORTED_100baseT_Full (1<<3) -#define ELINK_SUPPORTED_1000baseT_Full (1<<4) -#define ELINK_SUPPORTED_2500baseX_Full (1<<5) -#define ELINK_SUPPORTED_10000baseT_Full (1<<6) -#define ELINK_SUPPORTED_TP (1<<7) -#define ELINK_SUPPORTED_FIBRE (1<<8) -#define ELINK_SUPPORTED_Autoneg (1<<9) -#define ELINK_SUPPORTED_Pause (1<<10) -#define ELINK_SUPPORTED_Asym_Pause (1<<11) -#define ELINK_SUPPORTED_20000baseMLD2_Full (1<<21) -#define ELINK_SUPPORTED_20000baseKR2_Full (1<<22) +#define ELINK_SUPPORTED_10baseT_Half (1 << 0) +#define ELINK_SUPPORTED_10baseT_Full (1 << 1) +#define ELINK_SUPPORTED_100baseT_Half (1 << 2) +#define ELINK_SUPPORTED_100baseT_Full (1 << 3) +#define ELINK_SUPPORTED_1000baseT_Full (1 << 4) +#define ELINK_SUPPORTED_2500baseX_Full (1 << 5) +#define ELINK_SUPPORTED_10000baseT_Full (1 << 6) +#define ELINK_SUPPORTED_TP (1 << 7) +#define ELINK_SUPPORTED_FIBRE (1 << 8) +#define ELINK_SUPPORTED_Autoneg (1 << 9) +#define ELINK_SUPPORTED_Pause (1 << 10) +#define ELINK_SUPPORTED_Asym_Pause (1 << 11) +#define ELINK_SUPPORTED_1000baseKX_Full (1 << 17) +#define ELINK_SUPPORTED_10000baseKR_Full (1 << 19) +#define ELINK_SUPPORTED_20000baseMLD2_Full (1 << 21) +#define ELINK_SUPPORTED_20000baseKR2_Full (1 << 22) uint32_t media_type; #define ELINK_ETH_PHY_UNSPECIFIED 0x0 @@ -353,17 +394,22 @@ struct elink_params { /* features */ uint32_t feature_config_flags; -#define ELINK_FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED (1<<0) -#define ELINK_FEATURE_CONFIG_PFC_ENABLED (1<<1) -#define ELINK_FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY (1<<2) -#define ELINK_FEATURE_CONFIG_BC_SUPPORTS_DUAL_PHY_OPT_MDL_VRFY (1<<3) -#define ELINK_FEATURE_CONFIG_BC_SUPPORTS_AFEX (1<<8) -#define ELINK_FEATURE_CONFIG_AUTOGREEEN_ENABLED (1<<9) -#define ELINK_FEATURE_CONFIG_BC_SUPPORTS_SFP_TX_DISABLED (1<<10) -#define ELINK_FEATURE_CONFIG_DISABLE_REMOTE_FAULT_DET (1<<11) -#define ELINK_FEATURE_CONFIG_IEEE_PHY_TEST (1<<12) -#define ELINK_FEATURE_CONFIG_MT_SUPPORT (1<<13) -#define ELINK_FEATURE_CONFIG_BOOT_FROM_SAN (1<<14) +#define ELINK_FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED (1 << 0) +#define ELINK_FEATURE_CONFIG_PFC_ENABLED (1 << 1) +#define ELINK_FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY (1 << 2) +#define ELINK_FEATURE_CONFIG_BC_SUPPORTS_DUAL_PHY_OPT_MDL_VRFY (1 << 3) +#define ELINK_FEATURE_CONFIG_EMUL_DISABLE_EMAC (1 << 4) +#define ELINK_FEATURE_CONFIG_EMUL_DISABLE_BMAC (1 << 5) +#define ELINK_FEATURE_CONFIG_EMUL_DISABLE_UMAC (1 << 6) +#define ELINK_FEATURE_CONFIG_EMUL_DISABLE_XMAC (1 << 7) +#define ELINK_FEATURE_CONFIG_BC_SUPPORTS_AFEX (1 << 8) +#define ELINK_FEATURE_CONFIG_AUTOGREEEN_ENABLED (1 << 9) +#define ELINK_FEATURE_CONFIG_BC_SUPPORTS_SFP_TX_DISABLED (1 << 10) +#define ELINK_FEATURE_CONFIG_DISABLE_REMOTE_FAULT_DET (1 << 11) +#define ELINK_FEATURE_CONFIG_IEEE_PHY_TEST (1 << 12) +#define ELINK_FEATURE_CONFIG_MT_SUPPORT (1 << 13) +#define ELINK_FEATURE_CONFIG_BOOT_FROM_SAN (1 << 14) +#define ELINK_FEATURE_CONFIG_DISABLE_PD (1 << 15) /* Will be populated during common init */ struct elink_phy phy[ELINK_MAX_PHYS]; @@ -391,10 +437,10 @@ struct elink_params { #define ELINK_EEE_MODE_NVRAM_LATENCY_TIME (0x6000) #define ELINK_EEE_MODE_NVRAM_MASK (0x3) #define ELINK_EEE_MODE_TIMER_MASK (0xfffff) -#define ELINK_EEE_MODE_OUTPUT_TIME (1<<28) -#define ELINK_EEE_MODE_OVERRIDE_NVRAM (1<<29) -#define ELINK_EEE_MODE_ENABLE_LPI (1<<30) -#define ELINK_EEE_MODE_ADV_LPI (1<<31) +#define ELINK_EEE_MODE_OUTPUT_TIME (1 << 28) +#define ELINK_EEE_MODE_OVERRIDE_NVRAM (1 << 29) +#define ELINK_EEE_MODE_ENABLE_LPI (1 << 30) +#define ELINK_EEE_MODE_ADV_LPI (1 << 31) uint16_t hw_led_mode; /* part of the hw_config read from the shmem */ uint32_t multi_phy_config; @@ -404,20 +450,23 @@ struct elink_params { uint16_t req_fc_auto_adv; /* Should be set to TX / BOTH when req_flow_ctrl is set to AUTO */ uint16_t link_flags; -#define ELINK_LINK_FLAGS_INT_DISABLED (1<<0) -#define ELINK_PHY_INITIALIZED (1<<1) +#define ELINK_LINK_FLAGS_INT_DISABLED (1 << 0) +#define ELINK_PHY_INITIALIZED (1 << 1) uint32_t lfa_base; + + /* The same definitions as the shmem2 parameter */ + uint32_t link_attr_sync; }; /* Output parameters */ struct elink_vars { uint8_t phy_flags; -#define PHY_XGXS_FLAG (1<<0) -#define PHY_SGMII_FLAG (1<<1) -#define PHY_PHYSICAL_LINK_FLAG (1<<2) -#define PHY_HALF_OPEN_CONN_FLAG (1<<3) -#define PHY_OVER_CURRENT_FLAG (1<<4) -#define PHY_SFP_TX_FAULT_FLAG (1<<5) +#define PHY_XGXS_FLAG (1 << 0) +#define PHY_SGMII_FLAG (1 << 1) +#define PHY_PHYSICAL_LINK_FLAG (1 << 2) +#define PHY_HALF_OPEN_CONN_FLAG (1 << 3) +#define PHY_OVER_CURRENT_FLAG (1 << 4) +#define PHY_SFP_TX_FAULT_FLAG (1 << 5) uint8_t mac_type; #define ELINK_MAC_TYPE_NONE 0 @@ -448,8 +497,7 @@ struct elink_vars { uint8_t rx_tx_asic_rst; uint8_t turn_to_run_wc_rt; uint16_t rsrv2; - /* The same definitions as the shmem2 parameter */ - uint32_t link_attr_sync; + }; /***********************************************************/ @@ -460,14 +508,32 @@ elink_status_t elink_phy_init(struct elink_params *params, struct elink_vars *va /* Reset the link. Should be called when driver or interface goes down Before calling phy firmware upgrade, the reset_ext_phy should be set to 0 */ +elink_status_t elink_link_reset(struct elink_params *params, + struct elink_vars *vars, + uint8_t reset_ext_phy); elink_status_t elink_lfa_reset(struct elink_params *params, struct elink_vars *vars); /* elink_link_update should be called upon link interrupt */ elink_status_t elink_link_update(struct elink_params *params, struct elink_vars *vars); +/* use the following phy functions to read/write from external_phy + * In order to use it to read/write internal phy registers, use + * ELINK_DEFAULT_PHY_DEV_ADDR as devad, and (_bank + (_addr & 0xf)) as + * the register + */ +elink_status_t elink_phy_read(struct elink_params *params, uint8_t phy_addr, + uint8_t devad, uint16_t reg, uint16_t *ret_val); + +elink_status_t elink_phy_write(struct elink_params *params, uint8_t phy_addr, + uint8_t devad, uint16_t reg, uint16_t val); + /* Reads the link_status from the shmem, and update the link vars accordingly */ void elink_link_status_update(struct elink_params *input, struct elink_vars *output); +/* returns string representing the fw_version of the external phy */ +elink_status_t elink_get_ext_phy_fw_version(struct elink_params *params, + uint8_t *version, + uint16_t len); /* Set/Unset the led Basically, the CLC takes care of the led for the link, but in case one needs @@ -481,12 +547,34 @@ elink_status_t elink_set_led(struct elink_params *params, #define ELINK_LED_MODE_FRONT_PANEL_OFF 3 /* elink_handle_module_detect_int should be called upon module detection - interrupt */ + * interrupt + */ void elink_handle_module_detect_int(struct elink_params *params); +/* Get the actual link status. In case it returns ELINK_STATUS_OK, link is up, + * otherwise link is down + */ +elink_status_t elink_test_link(struct elink_params *params, + struct elink_vars *vars, + uint8_t is_serdes); + + /* One-time initialization for external phy after power up */ elink_status_t elink_common_init_phy(struct bnx2x_softc *sc, uint32_t shmem_base_path[], - uint32_t shmem2_base_path[], uint32_t chip_id, uint8_t one_port_enabled); + uint32_t shmem2_base_path[], uint32_t chip_id, + uint8_t one_port_enabled); + +/* Reset the external PHY using GPIO */ +void elink_ext_phy_hw_reset(struct bnx2x_softc *sc, uint8_t port); + +/* Reset the external of SFX7101 */ +void elink_sfx7101_sp_sw_reset(struct bnx2x_softc *sc, struct elink_phy *phy); + +/* Read "byte_cnt" bytes from address "addr" from the SFP+ EEPROM */ +elink_status_t elink_read_sfp_module_eeprom(struct elink_phy *phy, + struct elink_params *params, uint8_t dev_addr, + uint16_t addr, uint16_t byte_cnt, + uint8_t *o_buf); void elink_hw_reset_phy(struct elink_params *params); @@ -569,12 +657,42 @@ elink_status_t elink_update_pfc(struct elink_params *params, struct elink_vars *vars, struct elink_nig_brb_pfc_port_params *pfc_params); + +/* Used to configure the ETS to disable */ +elink_status_t elink_ets_disabled(struct elink_params *params, + struct elink_vars *vars); + +/* Used to configure the ETS to BW limited */ +void elink_ets_bw_limit(const struct elink_params *params, + const uint32_t cos0_bw, + const uint32_t cos1_bw); + +/* Used to configure the ETS to strict */ +elink_status_t elink_ets_strict(const struct elink_params *params, + const uint8_t strict_cos); + + +/* Configure the COS to ETS according to BW and SP settings.*/ +elink_status_t elink_ets_e3b0_config(const struct elink_params *params, + const struct elink_vars *vars, + struct elink_ets_params *ets_params); +/* Read pfc statistic*/ +void elink_pfc_statistic(struct elink_params *params, struct elink_vars *vars, + uint32_t pfc_frames_sent[2], + uint32_t pfc_frames_received[2]); void elink_init_mod_abs_int(struct bnx2x_softc *sc, struct elink_vars *vars, uint32_t chip_id, uint32_t shmem_base, uint32_t shmem2_base, uint8_t port); +/* elink_status_t elink_sfp_module_detection(struct elink_phy *phy, + * struct elink_params *params); + */ void elink_period_func(struct elink_params *params, struct elink_vars *vars); +/*elink_status_t elink_check_half_open_conn(struct elink_params *params, + * struct elink_vars *vars, uint8_t notify); + */ + void elink_enable_pmd_tx(struct elink_params *params); |