Imported Upstream version 16.04

Change-Id: I77eadcd8538a9122e4773cbe55b24033dc451757
Signed-off-by: C.J. Collier <cjcollier@linuxfoundation.org>

1 files changed, 377 insertions, 0 deletions

diff --git a/drivers/net/bonding/rte_eth_bond.h b/drivers/net/bonding/rte_eth_bond.h
new file mode 100644
index 00000000..8efbf071
--- /dev/null
+++ b/drivers/net/bonding/rte_eth_bond.h
@@ -0,0 +1,377 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_ETH_BOND_H_
+#define _RTE_ETH_BOND_H_
+
+/**
+ * @file rte_eth_bond.h
+ *
+ * RTE Link Bonding Ethernet Device
+ * Link Bonding for 1GbE and 10GbE ports to allow the aggregation of multiple
+ * (slave) NICs into a single logical interface. The bonded device processes
+ * these interfaces based on the mode of operation specified and supported.
+ * This implementation supports 4 modes of operation round robin, active backup
+ * balance and broadcast. Providing redundant links, fault tolerance and/or
+ * load balancing of network ports
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <rte_ether.h>
+
+/* Supported modes of operation of link bonding library  */
+
+#define BONDING_MODE_ROUND_ROBIN		(0)
+/**< Round Robin (Mode 0).
+ * In this mode all transmitted packets will be balanced equally across all
+ * active slaves of the bonded in a round robin fashion. */
+#define BONDING_MODE_ACTIVE_BACKUP		(1)
+/**< Active Backup (Mode 1).
+ * In this mode all packets transmitted will be transmitted on the primary
+ * slave until such point as the primary slave is no longer available and then
+ * transmitted packets will be sent on the next available slaves. The primary
+ * slave can be defined by the user but defaults to the first active slave
+ * available if not specified. */
+#define BONDING_MODE_BALANCE			(2)
+/**< Balance (Mode 2).
+ * In this mode all packets transmitted will be balanced across the available
+ * slaves using one of three available transmit policies - l2, l2+3 or l3+4.
+ * See BALANCE_XMIT_POLICY macros definitions for further details on transmit
+ * policies. */
+#define BONDING_MODE_BROADCAST			(3)
+/**< Broadcast (Mode 3).
+ * In this mode all transmitted packets will be transmitted on all available
+ * active slaves of the bonded. */
+#define BONDING_MODE_8023AD				(4)
+/**< 802.3AD (Mode 4).
+ *
+ * This mode provides auto negotiation/configuration
+ * of peers and well as link status changes monitoring using out of band
+ * LACP (link aggregation control protocol) messages. For further details of
+ * LACP specification see the IEEE 802.3ad/802.1AX standards. It is also
+ * described here
+ * https://www.kernel.org/doc/Documentation/networking/bonding.txt.
+ *
+ * Important Usage Notes:
+ * - for LACP mode to work the rx/tx burst functions must be invoked
+ * at least once every 100ms, otherwise the out-of-band LACP messages will not
+ * be handled with the expected latency and this may cause the link status to be
+ * incorrectly marked as down or failure to correctly negotiate with peers.
+ * - For optimal performance during initial handshaking the array of mbufs provided
+ * to rx_burst should be at least 2 times the slave count size.
+ *
+ */
+#define BONDING_MODE_TLB	(5)
+/**< Adaptive TLB (Mode 5)
+ * This mode provides an adaptive transmit load balancing. It dynamically
+ * changes the transmitting slave, according to the computed load. Statistics
+ * are collected in 100ms intervals and scheduled every 10ms */
+#define BONDING_MODE_ALB	(6)
+/**< Adaptive Load Balancing (Mode 6)
+ * This mode includes adaptive TLB and receive load balancing (RLB). In RLB the
+ * bonding driver intercepts ARP replies send by local system and overwrites its
+ * source MAC address, so that different peers send data to the server on
+ * different slave interfaces. When local system sends ARP request, it saves IP
+ * information from it. When ARP reply from that peer is received, its MAC is
+ * stored, one of slave MACs assigned and ARP reply send to that peer.
+ */
+
+/* Balance Mode Transmit Policies */
+#define BALANCE_XMIT_POLICY_LAYER2		(0)
+/**< Layer 2 (Ethernet MAC) */
+#define BALANCE_XMIT_POLICY_LAYER23		(1)
+/**< Layer 2+3 (Ethernet MAC + IP Addresses) transmit load balancing */
+#define BALANCE_XMIT_POLICY_LAYER34		(2)
+/**< Layer 3+4 (IP Addresses + UDP Ports) transmit load balancing */
+
+/**
+ * Create a bonded rte_eth_dev device
+ *
+ * @param name			Name of new link bonding device.
+ * @param mode			Mode to initialize bonding device in.
+ * @param socket_id		Socket Id on which to allocate eth_dev resources.
+ *
+ * @return
+ *	Port Id of created rte_eth_dev on success, negative value otherwise
+ */
+int
+rte_eth_bond_create(const char *name, uint8_t mode, uint8_t socket_id);
+
+/**
+ * Free a bonded rte_eth_dev device
+ *
+ * @param name			Name of the link bonding device.
+ *
+ * @return
+ *	0 on success, negative value otherwise
+ */
+int
+rte_eth_bond_free(const char *name);
+
+/**
+ * Add a rte_eth_dev device as a slave to the bonded device
+ *
+ * @param bonded_port_id	Port ID of bonded device.
+ * @param slave_port_id		Port ID of slave device.
+ *
+ * @return
+ *	0 on success, negative value otherwise
+ */
+int
+rte_eth_bond_slave_add(uint8_t bonded_port_id, uint8_t slave_port_id);
+
+/**
+ * Remove a slave rte_eth_dev device from the bonded device
+ *
+ * @param bonded_port_id	Port ID of bonded device.
+ * @param slave_port_id		Port ID of slave device.
+ *
+ * @return
+ *	0 on success, negative value otherwise
+ */
+int
+rte_eth_bond_slave_remove(uint8_t bonded_port_id, uint8_t slave_port_id);
+
+/**
+ * Set link bonding mode of bonded device
+ *
+ * @param bonded_port_id	Port ID of bonded device.
+ * @param mode				Bonding mode to set
+ *
+ * @return
+ *	0 on success, negative value otherwise
+ */
+int
+rte_eth_bond_mode_set(uint8_t bonded_port_id, uint8_t mode);
+
+/**
+ * Get link bonding mode of bonded device
+ *
+ * @param bonded_port_id	Port ID of bonded device.
+ *
+ * @return
+ *	link bonding mode on success, negative value otherwise
+ */
+int
+rte_eth_bond_mode_get(uint8_t bonded_port_id);
+
+/**
+ * Set slave rte_eth_dev as primary slave of bonded device
+ *
+ * @param bonded_port_id	Port ID of bonded device.
+ * @param slave_port_id		Port ID of slave device.
+ *
+ * @return
+ *	0 on success, negative value otherwise
+ */
+int
+rte_eth_bond_primary_set(uint8_t bonded_port_id, uint8_t slave_port_id);
+
+/**
+ * Get primary slave of bonded device
+ *
+ * @param bonded_port_id	Port ID of bonded device.
+ *
+ * @return
+ *	Port Id of primary slave on success, -1 on failure
+ */
+int
+rte_eth_bond_primary_get(uint8_t bonded_port_id);
+
+/**
+ * Populate an array with list of the slaves port id's of the bonded device
+ *
+ * @param bonded_port_id	Port ID of bonded eth_dev to interrogate
+ * @param slaves			Array to be populated with the current active slaves
+ * @param len				Length of slaves array
+ *
+ * @return
+ *	Number of slaves associated with bonded device on success,
+ *	negative value otherwise
+ */
+int
+rte_eth_bond_slaves_get(uint8_t bonded_port_id, uint8_t slaves[], uint8_t len);
+
+/**
+ * Populate an array with list of the active slaves port id's of the bonded
+ * device.
+ *
+ * @param bonded_port_id	Port ID of bonded eth_dev to interrogate
+ * @param slaves			Array to be populated with the current active slaves
+ * @param len				Length of slaves array
+ *
+ * @return
+ *	Number of active slaves associated with bonded device on success,
+ *	negative value otherwise
+ */
+int
+rte_eth_bond_active_slaves_get(uint8_t bonded_port_id, uint8_t slaves[],
+		uint8_t len);
+
+/**
+ * Set explicit MAC address to use on bonded device and it's slaves.
+ *
+ * @param bonded_port_id	Port ID of bonded device.
+ * @param mac_addr			MAC Address to use on bonded device overriding
+ *							slaves MAC addresses
+ *
+ * @return
+ *	0 on success, negative value otherwise
+ */
+int
+rte_eth_bond_mac_address_set(uint8_t bonded_port_id,
+		struct ether_addr *mac_addr);
+
+/**
+ * Reset bonded device to use MAC from primary slave on bonded device and it's
+ * slaves.
+ *
+ * @param bonded_port_id	Port ID of bonded device.
+ *
+ * @return
+ *	0 on success, negative value otherwise
+ */
+int
+rte_eth_bond_mac_address_reset(uint8_t bonded_port_id);
+
+/**
+ * Set the transmit policy for bonded device to use when it is operating in
+ * balance mode, this parameter is otherwise ignored in other modes of
+ * operation.
+ *
+ * @param bonded_port_id	Port ID of bonded device.
+ * @param policy			Balance mode transmission policy.
+ *
+ * @return
+ *	0 on success, negative value otherwise.
+ */
+int
+rte_eth_bond_xmit_policy_set(uint8_t bonded_port_id, uint8_t policy);
+
+/**
+ * Get the transmit policy set on bonded device for balance mode operation
+ *
+ * @param bonded_port_id	Port ID of bonded device.
+ *
+ * @return
+ *	Balance transmit policy on success, negative value otherwise.
+ */
+int
+rte_eth_bond_xmit_policy_get(uint8_t bonded_port_id);
+
+/**
+ * Set the link monitoring frequency (in ms) for monitoring the link status of
+ * slave devices
+ *
+ * @param bonded_port_id	Port ID of bonded device.
+ * @param internal_ms		Monitoring interval in milliseconds
+ *
+ * @return
+ *	0 on success, negative value otherwise.
+ */
+
+int
+rte_eth_bond_link_monitoring_set(uint8_t bonded_port_id, uint32_t internal_ms);
+
+/**
+ * Get the current link monitoring frequency (in ms) for monitoring of the link
+ * status of slave devices
+ *
+ * @param bonded_port_id	Port ID of bonded device.
+ *
+ * @return
+ *	Monitoring interval on success, negative value otherwise.
+ */
+int
+rte_eth_bond_link_monitoring_get(uint8_t bonded_port_id);
+
+
+/**
+ * Set the period in milliseconds for delaying the disabling of a bonded link
+ * when the link down status has been detected
+ *
+ * @param bonded_port_id	Port ID of bonded device.
+ * @param delay_ms			Delay period in milliseconds.
+ *
+ * @return
+ *  0 on success, negative value otherwise.
+ */
+int
+rte_eth_bond_link_down_prop_delay_set(uint8_t bonded_port_id, uint32_t delay_ms);
+
+/**
+ * Get the period in milliseconds set for delaying the disabling of a bonded
+ * link when the link down status has been detected
+ *
+ * @param bonded_port_id	Port ID of bonded device.
+ *
+ * @return
+ *  Delay period on success, negative value otherwise.
+ */
+int
+rte_eth_bond_link_down_prop_delay_get(uint8_t bonded_port_id);
+
+/**
+ * Set the period in milliseconds for delaying the enabling of a bonded link
+ * when the link up status has been detected
+ *
+ * @param bonded_port_id	Port ID of bonded device.
+ * @param delay_ms			Delay period in milliseconds.
+ *
+ * @return
+ *  0 on success, negative value otherwise.
+ */
+int
+rte_eth_bond_link_up_prop_delay_set(uint8_t bonded_port_id, uint32_t delay_ms);
+
+/**
+ * Get the period in milliseconds set for delaying the enabling of a bonded
+ * link when the link up status has been detected
+ *
+ * @param bonded_port_id	Port ID of bonded device.
+ *
+ * @return
+ *  Delay period on success, negative value otherwise.
+ */
+int
+rte_eth_bond_link_up_prop_delay_get(uint8_t bonded_port_id);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif