summaryrefslogtreecommitdiffstats
path: root/drivers/net/cxgbe/base/t4_hw.c
diff options
context:
space:
mode:
authorC.J. Collier <cjcollier@linuxfoundation.org>2016-06-14 07:50:17 -0700
committerC.J. Collier <cjcollier@linuxfoundation.org>2016-06-14 12:17:54 -0700
commit97f17497d162afdb82c8704bf097f0fee3724b2e (patch)
tree1c6269614c0c15ffef8451c58ae8f8b30a1bc804 /drivers/net/cxgbe/base/t4_hw.c
parente04be89c2409570e0055b2cda60bd11395bb93b0 (diff)
Imported Upstream version 16.04
Change-Id: I77eadcd8538a9122e4773cbe55b24033dc451757 Signed-off-by: C.J. Collier <cjcollier@linuxfoundation.org>
Diffstat (limited to 'drivers/net/cxgbe/base/t4_hw.c')
-rw-r--r--drivers/net/cxgbe/base/t4_hw.c2686
1 files changed, 2686 insertions, 0 deletions
diff --git a/drivers/net/cxgbe/base/t4_hw.c b/drivers/net/cxgbe/base/t4_hw.c
new file mode 100644
index 00000000..79af8067
--- /dev/null
+++ b/drivers/net/cxgbe/base/t4_hw.c
@@ -0,0 +1,2686 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2014-2015 Chelsio Communications.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Chelsio Communications nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <netinet/in.h>
+
+#include <rte_interrupts.h>
+#include <rte_log.h>
+#include <rte_debug.h>
+#include <rte_pci.h>
+#include <rte_atomic.h>
+#include <rte_branch_prediction.h>
+#include <rte_memory.h>
+#include <rte_memzone.h>
+#include <rte_tailq.h>
+#include <rte_eal.h>
+#include <rte_alarm.h>
+#include <rte_ether.h>
+#include <rte_ethdev.h>
+#include <rte_atomic.h>
+#include <rte_malloc.h>
+#include <rte_random.h>
+#include <rte_dev.h>
+#include <rte_byteorder.h>
+
+#include "common.h"
+#include "t4_regs.h"
+#include "t4_regs_values.h"
+#include "t4fw_interface.h"
+
+static void init_link_config(struct link_config *lc, unsigned int caps);
+
+/**
+ * t4_read_mtu_tbl - returns the values in the HW path MTU table
+ * @adap: the adapter
+ * @mtus: where to store the MTU values
+ * @mtu_log: where to store the MTU base-2 log (may be %NULL)
+ *
+ * Reads the HW path MTU table.
+ */
+void t4_read_mtu_tbl(struct adapter *adap, u16 *mtus, u8 *mtu_log)
+{
+ u32 v;
+ int i;
+
+ for (i = 0; i < NMTUS; ++i) {
+ t4_write_reg(adap, A_TP_MTU_TABLE,
+ V_MTUINDEX(0xff) | V_MTUVALUE(i));
+ v = t4_read_reg(adap, A_TP_MTU_TABLE);
+ mtus[i] = G_MTUVALUE(v);
+ if (mtu_log)
+ mtu_log[i] = G_MTUWIDTH(v);
+ }
+}
+
+/**
+ * t4_tp_wr_bits_indirect - set/clear bits in an indirect TP register
+ * @adap: the adapter
+ * @addr: the indirect TP register address
+ * @mask: specifies the field within the register to modify
+ * @val: new value for the field
+ *
+ * Sets a field of an indirect TP register to the given value.
+ */
+void t4_tp_wr_bits_indirect(struct adapter *adap, unsigned int addr,
+ unsigned int mask, unsigned int val)
+{
+ t4_write_reg(adap, A_TP_PIO_ADDR, addr);
+ val |= t4_read_reg(adap, A_TP_PIO_DATA) & ~mask;
+ t4_write_reg(adap, A_TP_PIO_DATA, val);
+}
+
+/* The minimum additive increment value for the congestion control table */
+#define CC_MIN_INCR 2U
+
+/**
+ * t4_load_mtus - write the MTU and congestion control HW tables
+ * @adap: the adapter
+ * @mtus: the values for the MTU table
+ * @alpha: the values for the congestion control alpha parameter
+ * @beta: the values for the congestion control beta parameter
+ *
+ * Write the HW MTU table with the supplied MTUs and the high-speed
+ * congestion control table with the supplied alpha, beta, and MTUs.
+ * We write the two tables together because the additive increments
+ * depend on the MTUs.
+ */
+void t4_load_mtus(struct adapter *adap, const unsigned short *mtus,
+ const unsigned short *alpha, const unsigned short *beta)
+{
+ static const unsigned int avg_pkts[NCCTRL_WIN] = {
+ 2, 6, 10, 14, 20, 28, 40, 56, 80, 112, 160, 224, 320, 448, 640,
+ 896, 1281, 1792, 2560, 3584, 5120, 7168, 10240, 14336, 20480,
+ 28672, 40960, 57344, 81920, 114688, 163840, 229376
+ };
+
+ unsigned int i, w;
+
+ for (i = 0; i < NMTUS; ++i) {
+ unsigned int mtu = mtus[i];
+ unsigned int log2 = cxgbe_fls(mtu);
+
+ if (!(mtu & ((1 << log2) >> 2))) /* round */
+ log2--;
+ t4_write_reg(adap, A_TP_MTU_TABLE, V_MTUINDEX(i) |
+ V_MTUWIDTH(log2) | V_MTUVALUE(mtu));
+
+ for (w = 0; w < NCCTRL_WIN; ++w) {
+ unsigned int inc;
+
+ inc = max(((mtu - 40) * alpha[w]) / avg_pkts[w],
+ CC_MIN_INCR);
+
+ t4_write_reg(adap, A_TP_CCTRL_TABLE, (i << 21) |
+ (w << 16) | (beta[w] << 13) | inc);
+ }
+ }
+}
+
+/**
+ * t4_wait_op_done_val - wait until an operation is completed
+ * @adapter: the adapter performing the operation
+ * @reg: the register to check for completion
+ * @mask: a single-bit field within @reg that indicates completion
+ * @polarity: the value of the field when the operation is completed
+ * @attempts: number of check iterations
+ * @delay: delay in usecs between iterations
+ * @valp: where to store the value of the register at completion time
+ *
+ * Wait until an operation is completed by checking a bit in a register
+ * up to @attempts times. If @valp is not NULL the value of the register
+ * at the time it indicated completion is stored there. Returns 0 if the
+ * operation completes and -EAGAIN otherwise.
+ */
+int t4_wait_op_done_val(struct adapter *adapter, int reg, u32 mask,
+ int polarity, int attempts, int delay, u32 *valp)
+{
+ while (1) {
+ u32 val = t4_read_reg(adapter, reg);
+
+ if (!!(val & mask) == polarity) {
+ if (valp)
+ *valp = val;
+ return 0;
+ }
+ if (--attempts == 0)
+ return -EAGAIN;
+ if (delay)
+ udelay(delay);
+ }
+}
+
+/**
+ * t4_set_reg_field - set a register field to a value
+ * @adapter: the adapter to program
+ * @addr: the register address
+ * @mask: specifies the portion of the register to modify
+ * @val: the new value for the register field
+ *
+ * Sets a register field specified by the supplied mask to the
+ * given value.
+ */
+void t4_set_reg_field(struct adapter *adapter, unsigned int addr, u32 mask,
+ u32 val)
+{
+ u32 v = t4_read_reg(adapter, addr) & ~mask;
+
+ t4_write_reg(adapter, addr, v | val);
+ (void)t4_read_reg(adapter, addr); /* flush */
+}
+
+/**
+ * t4_read_indirect - read indirectly addressed registers
+ * @adap: the adapter
+ * @addr_reg: register holding the indirect address
+ * @data_reg: register holding the value of the indirect register
+ * @vals: where the read register values are stored
+ * @nregs: how many indirect registers to read
+ * @start_idx: index of first indirect register to read
+ *
+ * Reads registers that are accessed indirectly through an address/data
+ * register pair.
+ */
+void t4_read_indirect(struct adapter *adap, unsigned int addr_reg,
+ unsigned int data_reg, u32 *vals, unsigned int nregs,
+ unsigned int start_idx)
+{
+ while (nregs--) {
+ t4_write_reg(adap, addr_reg, start_idx);
+ *vals++ = t4_read_reg(adap, data_reg);
+ start_idx++;
+ }
+}
+
+/**
+ * t4_write_indirect - write indirectly addressed registers
+ * @adap: the adapter
+ * @addr_reg: register holding the indirect addresses
+ * @data_reg: register holding the value for the indirect registers
+ * @vals: values to write
+ * @nregs: how many indirect registers to write
+ * @start_idx: address of first indirect register to write
+ *
+ * Writes a sequential block of registers that are accessed indirectly
+ * through an address/data register pair.
+ */
+void t4_write_indirect(struct adapter *adap, unsigned int addr_reg,
+ unsigned int data_reg, const u32 *vals,
+ unsigned int nregs, unsigned int start_idx)
+{
+ while (nregs--) {
+ t4_write_reg(adap, addr_reg, start_idx++);
+ t4_write_reg(adap, data_reg, *vals++);
+ }
+}
+
+/**
+ * t4_report_fw_error - report firmware error
+ * @adap: the adapter
+ *
+ * The adapter firmware can indicate error conditions to the host.
+ * If the firmware has indicated an error, print out the reason for
+ * the firmware error.
+ */
+static void t4_report_fw_error(struct adapter *adap)
+{
+ static const char * const reason[] = {
+ "Crash", /* PCIE_FW_EVAL_CRASH */
+ "During Device Preparation", /* PCIE_FW_EVAL_PREP */
+ "During Device Configuration", /* PCIE_FW_EVAL_CONF */
+ "During Device Initialization", /* PCIE_FW_EVAL_INIT */
+ "Unexpected Event", /* PCIE_FW_EVAL_UNEXPECTEDEVENT */
+ "Insufficient Airflow", /* PCIE_FW_EVAL_OVERHEAT */
+ "Device Shutdown", /* PCIE_FW_EVAL_DEVICESHUTDOWN */
+ "Reserved", /* reserved */
+ };
+ u32 pcie_fw;
+
+ pcie_fw = t4_read_reg(adap, A_PCIE_FW);
+ if (pcie_fw & F_PCIE_FW_ERR)
+ pr_err("%s: Firmware reports adapter error: %s\n",
+ __func__, reason[G_PCIE_FW_EVAL(pcie_fw)]);
+}
+
+/*
+ * Get the reply to a mailbox command and store it in @rpl in big-endian order.
+ */
+static void get_mbox_rpl(struct adapter *adap, __be64 *rpl, int nflit,
+ u32 mbox_addr)
+{
+ for ( ; nflit; nflit--, mbox_addr += 8)
+ *rpl++ = htobe64(t4_read_reg64(adap, mbox_addr));
+}
+
+/*
+ * Handle a FW assertion reported in a mailbox.
+ */
+static void fw_asrt(struct adapter *adap, u32 mbox_addr)
+{
+ struct fw_debug_cmd asrt;
+
+ get_mbox_rpl(adap, (__be64 *)&asrt, sizeof(asrt) / 8, mbox_addr);
+ pr_warn("FW assertion at %.16s:%u, val0 %#x, val1 %#x\n",
+ asrt.u.assert.filename_0_7, be32_to_cpu(asrt.u.assert.line),
+ be32_to_cpu(asrt.u.assert.x), be32_to_cpu(asrt.u.assert.y));
+}
+
+#define X_CIM_PF_NOACCESS 0xeeeeeeee
+
+/*
+ * If the Host OS Driver needs locking arround accesses to the mailbox, this
+ * can be turned on via the T4_OS_NEEDS_MBOX_LOCKING CPP define ...
+ */
+/* makes single-statement usage a bit cleaner ... */
+#ifdef T4_OS_NEEDS_MBOX_LOCKING
+#define T4_OS_MBOX_LOCKING(x) x
+#else
+#define T4_OS_MBOX_LOCKING(x) do {} while (0)
+#endif
+
+/**
+ * t4_wr_mbox_meat_timeout - send a command to FW through the given mailbox
+ * @adap: the adapter
+ * @mbox: index of the mailbox to use
+ * @cmd: the command to write
+ * @size: command length in bytes
+ * @rpl: where to optionally store the reply
+ * @sleep_ok: if true we may sleep while awaiting command completion
+ * @timeout: time to wait for command to finish before timing out
+ * (negative implies @sleep_ok=false)
+ *
+ * Sends the given command to FW through the selected mailbox and waits
+ * for the FW to execute the command. If @rpl is not %NULL it is used to
+ * store the FW's reply to the command. The command and its optional
+ * reply are of the same length. Some FW commands like RESET and
+ * INITIALIZE can take a considerable amount of time to execute.
+ * @sleep_ok determines whether we may sleep while awaiting the response.
+ * If sleeping is allowed we use progressive backoff otherwise we spin.
+ * Note that passing in a negative @timeout is an alternate mechanism
+ * for specifying @sleep_ok=false. This is useful when a higher level
+ * interface allows for specification of @timeout but not @sleep_ok ...
+ *
+ * Returns 0 on success or a negative errno on failure. A
+ * failure can happen either because we are not able to execute the
+ * command or FW executes it but signals an error. In the latter case
+ * the return value is the error code indicated by FW (negated).
+ */
+int t4_wr_mbox_meat_timeout(struct adapter *adap, int mbox,
+ const void __attribute__((__may_alias__)) *cmd,
+ int size, void *rpl, bool sleep_ok, int timeout)
+{
+ /*
+ * We delay in small increments at first in an effort to maintain
+ * responsiveness for simple, fast executing commands but then back
+ * off to larger delays to a maximum retry delay.
+ */
+ static const int delay[] = {
+ 1, 1, 3, 5, 10, 10, 20, 50, 100
+ };
+
+ u32 v;
+ u64 res;
+ int i, ms;
+ unsigned int delay_idx;
+ __be64 *temp = (__be64 *)malloc(size * sizeof(char));
+ __be64 *p = temp;
+ u32 data_reg = PF_REG(mbox, A_CIM_PF_MAILBOX_DATA);
+ u32 ctl_reg = PF_REG(mbox, A_CIM_PF_MAILBOX_CTRL);
+ u32 ctl;
+ struct mbox_entry entry;
+ u32 pcie_fw = 0;
+
+ if ((size & 15) || size > MBOX_LEN) {
+ free(temp);
+ return -EINVAL;
+ }
+
+ bzero(p, size);
+ memcpy(p, (const __be64 *)cmd, size);
+
+ /*
+ * If we have a negative timeout, that implies that we can't sleep.
+ */
+ if (timeout < 0) {
+ sleep_ok = false;
+ timeout = -timeout;
+ }
+
+#ifdef T4_OS_NEEDS_MBOX_LOCKING
+ /*
+ * Queue ourselves onto the mailbox access list. When our entry is at
+ * the front of the list, we have rights to access the mailbox. So we
+ * wait [for a while] till we're at the front [or bail out with an
+ * EBUSY] ...
+ */
+ t4_os_atomic_add_tail(&entry, &adap->mbox_list, &adap->mbox_lock);
+
+ delay_idx = 0;
+ ms = delay[0];
+
+ for (i = 0; ; i += ms) {
+ /*
+ * If we've waited too long, return a busy indication. This
+ * really ought to be based on our initial position in the
+ * mailbox access list but this is a start. We very rarely
+ * contend on access to the mailbox ... Also check for a
+ * firmware error which we'll report as a device error.
+ */
+ pcie_fw = t4_read_reg(adap, A_PCIE_FW);
+ if (i > 4 * timeout || (pcie_fw & F_PCIE_FW_ERR)) {
+ t4_os_atomic_list_del(&entry, &adap->mbox_list,
+ &adap->mbox_lock);
+ t4_report_fw_error(adap);
+ return (pcie_fw & F_PCIE_FW_ERR) ? -ENXIO : -EBUSY;
+ }
+
+ /*
+ * If we're at the head, break out and start the mailbox
+ * protocol.
+ */
+ if (t4_os_list_first_entry(&adap->mbox_list) == &entry)
+ break;
+
+ /*
+ * Delay for a bit before checking again ...
+ */
+ if (sleep_ok) {
+ ms = delay[delay_idx]; /* last element may repeat */
+ if (delay_idx < ARRAY_SIZE(delay) - 1)
+ delay_idx++;
+ msleep(ms);
+ } else {
+ rte_delay_ms(ms);
+ }
+ }
+#endif /* T4_OS_NEEDS_MBOX_LOCKING */
+
+ /*
+ * Attempt to gain access to the mailbox.
+ */
+ for (i = 0; i < 4; i++) {
+ ctl = t4_read_reg(adap, ctl_reg);
+ v = G_MBOWNER(ctl);
+ if (v != X_MBOWNER_NONE)
+ break;
+ }
+
+ /*
+ * If we were unable to gain access, dequeue ourselves from the
+ * mailbox atomic access list and report the error to our caller.
+ */
+ if (v != X_MBOWNER_PL) {
+ T4_OS_MBOX_LOCKING(t4_os_atomic_list_del(&entry,
+ &adap->mbox_list,
+ &adap->mbox_lock));
+ t4_report_fw_error(adap);
+ return (v == X_MBOWNER_FW ? -EBUSY : -ETIMEDOUT);
+ }
+
+ /*
+ * If we gain ownership of the mailbox and there's a "valid" message
+ * in it, this is likely an asynchronous error message from the
+ * firmware. So we'll report that and then proceed on with attempting
+ * to issue our own command ... which may well fail if the error
+ * presaged the firmware crashing ...
+ */
+ if (ctl & F_MBMSGVALID) {
+ dev_err(adap, "found VALID command in mbox %u: "
+ "%llx %llx %llx %llx %llx %llx %llx %llx\n", mbox,
+ (unsigned long long)t4_read_reg64(adap, data_reg),
+ (unsigned long long)t4_read_reg64(adap, data_reg + 8),
+ (unsigned long long)t4_read_reg64(adap, data_reg + 16),
+ (unsigned long long)t4_read_reg64(adap, data_reg + 24),
+ (unsigned long long)t4_read_reg64(adap, data_reg + 32),
+ (unsigned long long)t4_read_reg64(adap, data_reg + 40),
+ (unsigned long long)t4_read_reg64(adap, data_reg + 48),
+ (unsigned long long)t4_read_reg64(adap, data_reg + 56));
+ }
+
+ /*
+ * Copy in the new mailbox command and send it on its way ...
+ */
+ for (i = 0; i < size; i += 8, p++)
+ t4_write_reg64(adap, data_reg + i, be64_to_cpu(*p));
+
+ CXGBE_DEBUG_MBOX(adap, "%s: mbox %u: %016llx %016llx %016llx %016llx "
+ "%016llx %016llx %016llx %016llx\n", __func__, (mbox),
+ (unsigned long long)t4_read_reg64(adap, data_reg),
+ (unsigned long long)t4_read_reg64(adap, data_reg + 8),
+ (unsigned long long)t4_read_reg64(adap, data_reg + 16),
+ (unsigned long long)t4_read_reg64(adap, data_reg + 24),
+ (unsigned long long)t4_read_reg64(adap, data_reg + 32),
+ (unsigned long long)t4_read_reg64(adap, data_reg + 40),
+ (unsigned long long)t4_read_reg64(adap, data_reg + 48),
+ (unsigned long long)t4_read_reg64(adap, data_reg + 56));
+
+ t4_write_reg(adap, ctl_reg, F_MBMSGVALID | V_MBOWNER(X_MBOWNER_FW));
+ t4_read_reg(adap, ctl_reg); /* flush write */
+
+ delay_idx = 0;
+ ms = delay[0];
+
+ /*
+ * Loop waiting for the reply; bail out if we time out or the firmware
+ * reports an error.
+ */
+ pcie_fw = t4_read_reg(adap, A_PCIE_FW);
+ for (i = 0; i < timeout && !(pcie_fw & F_PCIE_FW_ERR); i += ms) {
+ if (sleep_ok) {
+ ms = delay[delay_idx]; /* last element may repeat */
+ if (delay_idx < ARRAY_SIZE(delay) - 1)
+ delay_idx++;
+ msleep(ms);
+ } else {
+ msleep(ms);
+ }
+
+ pcie_fw = t4_read_reg(adap, A_PCIE_FW);
+ v = t4_read_reg(adap, ctl_reg);
+ if (v == X_CIM_PF_NOACCESS)
+ continue;
+ if (G_MBOWNER(v) == X_MBOWNER_PL) {
+ if (!(v & F_MBMSGVALID)) {
+ t4_write_reg(adap, ctl_reg,
+ V_MBOWNER(X_MBOWNER_NONE));
+ continue;
+ }
+
+ CXGBE_DEBUG_MBOX(adap,
+ "%s: mbox %u: %016llx %016llx %016llx %016llx "
+ "%016llx %016llx %016llx %016llx\n", __func__, (mbox),
+ (unsigned long long)t4_read_reg64(adap, data_reg),
+ (unsigned long long)t4_read_reg64(adap, data_reg + 8),
+ (unsigned long long)t4_read_reg64(adap, data_reg + 16),
+ (unsigned long long)t4_read_reg64(adap, data_reg + 24),
+ (unsigned long long)t4_read_reg64(adap, data_reg + 32),
+ (unsigned long long)t4_read_reg64(adap, data_reg + 40),
+ (unsigned long long)t4_read_reg64(adap, data_reg + 48),
+ (unsigned long long)t4_read_reg64(adap, data_reg + 56));
+
+ CXGBE_DEBUG_MBOX(adap,
+ "command %#x completed in %d ms (%ssleeping)\n",
+ *(const u8 *)cmd,
+ i + ms, sleep_ok ? "" : "non-");
+
+ res = t4_read_reg64(adap, data_reg);
+ if (G_FW_CMD_OP(res >> 32) == FW_DEBUG_CMD) {
+ fw_asrt(adap, data_reg);
+ res = V_FW_CMD_RETVAL(EIO);
+ } else if (rpl) {
+ get_mbox_rpl(adap, rpl, size / 8, data_reg);
+ }
+ t4_write_reg(adap, ctl_reg, V_MBOWNER(X_MBOWNER_NONE));
+ T4_OS_MBOX_LOCKING(
+ t4_os_atomic_list_del(&entry, &adap->mbox_list,
+ &adap->mbox_lock));
+ return -G_FW_CMD_RETVAL((int)res);
+ }
+ }
+
+ /*
+ * We timed out waiting for a reply to our mailbox command. Report
+ * the error and also check to see if the firmware reported any
+ * errors ...
+ */
+ dev_err(adap, "command %#x in mailbox %d timed out\n",
+ *(const u8 *)cmd, mbox);
+ T4_OS_MBOX_LOCKING(t4_os_atomic_list_del(&entry,
+ &adap->mbox_list,
+ &adap->mbox_lock));
+ t4_report_fw_error(adap);
+ free(temp);
+ return (pcie_fw & F_PCIE_FW_ERR) ? -ENXIO : -ETIMEDOUT;
+}
+
+int t4_wr_mbox_meat(struct adapter *adap, int mbox, const void *cmd, int size,
+ void *rpl, bool sleep_ok)
+{
+ return t4_wr_mbox_meat_timeout(adap, mbox, cmd, size, rpl, sleep_ok,
+ FW_CMD_MAX_TIMEOUT);
+}
+
+/**
+ * t4_config_rss_range - configure a portion of the RSS mapping table
+ * @adapter: the adapter
+ * @mbox: mbox to use for the FW command
+ * @viid: virtual interface whose RSS subtable is to be written
+ * @start: start entry in the table to write
+ * @n: how many table entries to write
+ * @rspq: values for the "response queue" (Ingress Queue) lookup table
+ * @nrspq: number of values in @rspq
+ *
+ * Programs the selected part of the VI's RSS mapping table with the
+ * provided values. If @nrspq < @n the supplied values are used repeatedly
+ * until the full table range is populated.
+ *
+ * The caller must ensure the values in @rspq are in the range allowed for
+ * @viid.
+ */
+int t4_config_rss_range(struct adapter *adapter, int mbox, unsigned int viid,
+ int start, int n, const u16 *rspq, unsigned int nrspq)
+{
+ int ret;
+ const u16 *rsp = rspq;
+ const u16 *rsp_end = rspq + nrspq;
+ struct fw_rss_ind_tbl_cmd cmd;
+
+ memset(&cmd, 0, sizeof(cmd));
+ cmd.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_RSS_IND_TBL_CMD) |
+ F_FW_CMD_REQUEST | F_FW_CMD_WRITE |
+ V_FW_RSS_IND_TBL_CMD_VIID(viid));
+ cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd));
+
+ /*
+ * Each firmware RSS command can accommodate up to 32 RSS Ingress
+ * Queue Identifiers. These Ingress Queue IDs are packed three to
+ * a 32-bit word as 10-bit values with the upper remaining 2 bits
+ * reserved.
+ */
+ while (n > 0) {
+ int nq = min(n, 32);
+ int nq_packed = 0;
+ __be32 *qp = &cmd.iq0_to_iq2;
+
+ /*
+ * Set up the firmware RSS command header to send the next
+ * "nq" Ingress Queue IDs to the firmware.
+ */
+ cmd.niqid = cpu_to_be16(nq);
+ cmd.startidx = cpu_to_be16(start);
+
+ /*
+ * "nq" more done for the start of the next loop.
+ */
+ start += nq;
+ n -= nq;
+
+ /*
+ * While there are still Ingress Queue IDs to stuff into the
+ * current firmware RSS command, retrieve them from the
+ * Ingress Queue ID array and insert them into the command.
+ */
+ while (nq > 0) {
+ /*
+ * Grab up to the next 3 Ingress Queue IDs (wrapping
+ * around the Ingress Queue ID array if necessary) and
+ * insert them into the firmware RSS command at the
+ * current 3-tuple position within the commad.
+ */
+ u16 qbuf[3];
+ u16 *qbp = qbuf;
+ int nqbuf = min(3, nq);
+
+ nq -= nqbuf;
+ qbuf[0] = 0;
+ qbuf[1] = 0;
+ qbuf[2] = 0;
+ while (nqbuf && nq_packed < 32) {
+ nqbuf--;
+ nq_packed++;
+ *qbp++ = *rsp++;
+ if (rsp >= rsp_end)
+ rsp = rspq;
+ }
+ *qp++ = cpu_to_be32(V_FW_RSS_IND_TBL_CMD_IQ0(qbuf[0]) |
+ V_FW_RSS_IND_TBL_CMD_IQ1(qbuf[1]) |
+ V_FW_RSS_IND_TBL_CMD_IQ2(qbuf[2]));
+ }
+
+ /*
+ * Send this portion of the RRS table update to the firmware;
+ * bail out on any errors.
+ */
+ ret = t4_wr_mbox(adapter, mbox, &cmd, sizeof(cmd), NULL);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * t4_config_vi_rss - configure per VI RSS settings
+ * @adapter: the adapter
+ * @mbox: mbox to use for the FW command
+ * @viid: the VI id
+ * @flags: RSS flags
+ * @defq: id of the default RSS queue for the VI.
+ *
+ * Configures VI-specific RSS properties.
+ */
+int t4_config_vi_rss(struct adapter *adapter, int mbox, unsigned int viid,
+ unsigned int flags, unsigned int defq)
+{
+ struct fw_rss_vi_config_cmd c;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_RSS_VI_CONFIG_CMD) |
+ F_FW_CMD_REQUEST | F_FW_CMD_WRITE |
+ V_FW_RSS_VI_CONFIG_CMD_VIID(viid));
+ c.retval_len16 = cpu_to_be32(FW_LEN16(c));
+ c.u.basicvirtual.defaultq_to_udpen = cpu_to_be32(flags |
+ V_FW_RSS_VI_CONFIG_CMD_DEFAULTQ(defq));
+ return t4_wr_mbox(adapter, mbox, &c, sizeof(c), NULL);
+}
+
+/**
+ * init_cong_ctrl - initialize congestion control parameters
+ * @a: the alpha values for congestion control
+ * @b: the beta values for congestion control
+ *
+ * Initialize the congestion control parameters.
+ */
+static void init_cong_ctrl(unsigned short *a, unsigned short *b)
+{
+ int i;
+
+ for (i = 0; i < 9; i++) {
+ a[i] = 1;
+ b[i] = 0;
+ }
+
+ a[9] = 2;
+ a[10] = 3;
+ a[11] = 4;
+ a[12] = 5;
+ a[13] = 6;
+ a[14] = 7;
+ a[15] = 8;
+ a[16] = 9;
+ a[17] = 10;
+ a[18] = 14;
+ a[19] = 17;
+ a[20] = 21;
+ a[21] = 25;
+ a[22] = 30;
+ a[23] = 35;
+ a[24] = 45;
+ a[25] = 60;
+ a[26] = 80;
+ a[27] = 100;
+ a[28] = 200;
+ a[29] = 300;
+ a[30] = 400;
+ a[31] = 500;
+
+ b[9] = 1;
+ b[10] = 1;
+ b[11] = 2;
+ b[12] = 2;
+ b[13] = 3;
+ b[14] = 3;
+ b[15] = 3;
+ b[16] = 3;
+ b[17] = 4;
+ b[18] = 4;
+ b[19] = 4;
+ b[20] = 4;
+ b[21] = 4;
+ b[22] = 5;
+ b[23] = 5;
+ b[24] = 5;
+ b[25] = 5;
+ b[26] = 5;
+ b[27] = 5;
+ b[28] = 6;
+ b[29] = 6;
+ b[30] = 7;
+ b[31] = 7;
+}
+
+#define INIT_CMD(var, cmd, rd_wr) do { \
+ (var).op_to_write = cpu_to_be32(V_FW_CMD_OP(FW_##cmd##_CMD) | \
+ F_FW_CMD_REQUEST | F_FW_CMD_##rd_wr); \
+ (var).retval_len16 = cpu_to_be32(FW_LEN16(var)); \
+} while (0)
+
+int t4_get_core_clock(struct adapter *adapter, struct vpd_params *p)
+{
+ u32 cclk_param, cclk_val;
+ int ret;
+
+ /*
+ * Ask firmware for the Core Clock since it knows how to translate the
+ * Reference Clock ('V2') VPD field into a Core Clock value ...
+ */
+ cclk_param = (V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) |
+ V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_CCLK));
+ ret = t4_query_params(adapter, adapter->mbox, adapter->pf, 0,
+ 1, &cclk_param, &cclk_val);
+ if (ret) {
+ dev_err(adapter, "%s: error in fetching from coreclock - %d\n",
+ __func__, ret);
+ return ret;
+ }
+
+ p->cclk = cclk_val;
+ dev_debug(adapter, "%s: p->cclk = %u\n", __func__, p->cclk);
+ return 0;
+}
+
+/* serial flash and firmware constants and flash config file constants */
+enum {
+ SF_ATTEMPTS = 10, /* max retries for SF operations */
+
+ /* flash command opcodes */
+ SF_PROG_PAGE = 2, /* program page */
+ SF_WR_DISABLE = 4, /* disable writes */
+ SF_RD_STATUS = 5, /* read status register */
+ SF_WR_ENABLE = 6, /* enable writes */
+ SF_RD_DATA_FAST = 0xb, /* read flash */
+ SF_RD_ID = 0x9f, /* read ID */
+ SF_ERASE_SECTOR = 0xd8, /* erase sector */
+};
+
+/**
+ * sf1_read - read data from the serial flash
+ * @adapter: the adapter
+ * @byte_cnt: number of bytes to read
+ * @cont: whether another operation will be chained
+ * @lock: whether to lock SF for PL access only
+ * @valp: where to store the read data
+ *
+ * Reads up to 4 bytes of data from the serial flash. The location of
+ * the read needs to be specified prior to calling this by issuing the
+ * appropriate commands to the serial flash.
+ */
+static int sf1_read(struct adapter *adapter, unsigned int byte_cnt, int cont,
+ int lock, u32 *valp)
+{
+ int ret;
+
+ if (!byte_cnt || byte_cnt > 4)
+ return -EINVAL;
+ if (t4_read_reg(adapter, A_SF_OP) & F_BUSY)
+ return -EBUSY;
+ t4_write_reg(adapter, A_SF_OP,
+ V_SF_LOCK(lock) | V_CONT(cont) | V_BYTECNT(byte_cnt - 1));
+ ret = t4_wait_op_done(adapter, A_SF_OP, F_BUSY, 0, SF_ATTEMPTS, 5);
+ if (!ret)
+ *valp = t4_read_reg(adapter, A_SF_DATA);
+ return ret;
+}
+
+/**
+ * sf1_write - write data to the serial flash
+ * @adapter: the adapter
+ * @byte_cnt: number of bytes to write
+ * @cont: whether another operation will be chained
+ * @lock: whether to lock SF for PL access only
+ * @val: value to write
+ *
+ * Writes up to 4 bytes of data to the serial flash. The location of
+ * the write needs to be specified prior to calling this by issuing the
+ * appropriate commands to the serial flash.
+ */
+static int sf1_write(struct adapter *adapter, unsigned int byte_cnt, int cont,
+ int lock, u32 val)
+{
+ if (!byte_cnt || byte_cnt > 4)
+ return -EINVAL;
+ if (t4_read_reg(adapter, A_SF_OP) & F_BUSY)
+ return -EBUSY;
+ t4_write_reg(adapter, A_SF_DATA, val);
+ t4_write_reg(adapter, A_SF_OP, V_SF_LOCK(lock) |
+ V_CONT(cont) | V_BYTECNT(byte_cnt - 1) | V_OP(1));
+ return t4_wait_op_done(adapter, A_SF_OP, F_BUSY, 0, SF_ATTEMPTS, 5);
+}
+
+/**
+ * t4_read_flash - read words from serial flash
+ * @adapter: the adapter
+ * @addr: the start address for the read
+ * @nwords: how many 32-bit words to read
+ * @data: where to store the read data
+ * @byte_oriented: whether to store data as bytes or as words
+ *
+ * Read the specified number of 32-bit words from the serial flash.
+ * If @byte_oriented is set the read data is stored as a byte array
+ * (i.e., big-endian), otherwise as 32-bit words in the platform's
+ * natural endianness.
+ */
+int t4_read_flash(struct adapter *adapter, unsigned int addr,
+ unsigned int nwords, u32 *data, int byte_oriented)
+{
+ int ret;
+
+ if (((addr + nwords * sizeof(u32)) > adapter->params.sf_size) ||
+ (addr & 3))
+ return -EINVAL;
+
+ addr = rte_constant_bswap32(addr) | SF_RD_DATA_FAST;
+
+ ret = sf1_write(adapter, 4, 1, 0, addr);
+ if (ret != 0)
+ return ret;
+
+ ret = sf1_read(adapter, 1, 1, 0, data);
+ if (ret != 0)
+ return ret;
+
+ for ( ; nwords; nwords--, data++) {
+ ret = sf1_read(adapter, 4, nwords > 1, nwords == 1, data);
+ if (nwords == 1)
+ t4_write_reg(adapter, A_SF_OP, 0); /* unlock SF */
+ if (ret)
+ return ret;
+ if (byte_oriented)
+ *data = cpu_to_be32(*data);
+ }
+ return 0;
+}
+
+/**
+ * t4_get_fw_version - read the firmware version
+ * @adapter: the adapter
+ * @vers: where to place the version
+ *
+ * Reads the FW version from flash.
+ */
+int t4_get_fw_version(struct adapter *adapter, u32 *vers)
+{
+ return t4_read_flash(adapter, FLASH_FW_START +
+ offsetof(struct fw_hdr, fw_ver), 1, vers, 0);
+}
+
+/**
+ * t4_get_tp_version - read the TP microcode version
+ * @adapter: the adapter
+ * @vers: where to place the version
+ *
+ * Reads the TP microcode version from flash.
+ */
+int t4_get_tp_version(struct adapter *adapter, u32 *vers)
+{
+ return t4_read_flash(adapter, FLASH_FW_START +
+ offsetof(struct fw_hdr, tp_microcode_ver),
+ 1, vers, 0);
+}
+
+#define ADVERT_MASK (FW_PORT_CAP_SPEED_100M | FW_PORT_CAP_SPEED_1G |\
+ FW_PORT_CAP_SPEED_10G | FW_PORT_CAP_SPEED_40G | \
+ FW_PORT_CAP_SPEED_100G | FW_PORT_CAP_ANEG)
+
+/**
+ * t4_link_l1cfg - apply link configuration to MAC/PHY
+ * @phy: the PHY to setup
+ * @mac: the MAC to setup
+ * @lc: the requested link configuration
+ *
+ * Set up a port's MAC and PHY according to a desired link configuration.
+ * - If the PHY can auto-negotiate first decide what to advertise, then
+ * enable/disable auto-negotiation as desired, and reset.
+ * - If the PHY does not auto-negotiate just reset it.
+ * - If auto-negotiation is off set the MAC to the proper speed/duplex/FC,
+ * otherwise do it later based on the outcome of auto-negotiation.
+ */
+int t4_link_l1cfg(struct adapter *adap, unsigned int mbox, unsigned int port,
+ struct link_config *lc)
+{
+ struct fw_port_cmd c;
+ unsigned int fc = 0, mdi = V_FW_PORT_CAP_MDI(FW_PORT_CAP_MDI_AUTO);
+
+ lc->link_ok = 0;
+ if (lc->requested_fc & PAUSE_RX)
+ fc |= FW_PORT_CAP_FC_RX;
+ if (lc->requested_fc & PAUSE_TX)
+ fc |= FW_PORT_CAP_FC_TX;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_portid = cpu_to_be32(V_FW_CMD_OP(FW_PORT_CMD) |
+ F_FW_CMD_REQUEST | F_FW_CMD_EXEC |
+ V_FW_PORT_CMD_PORTID(port));
+ c.action_to_len16 =
+ cpu_to_be32(V_FW_PORT_CMD_ACTION(FW_PORT_ACTION_L1_CFG) |
+ FW_LEN16(c));
+
+ if (!(lc->supported & FW_PORT_CAP_ANEG)) {
+ c.u.l1cfg.rcap = cpu_to_be32((lc->supported & ADVERT_MASK) |
+ fc);
+ lc->fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX);
+ } else if (lc->autoneg == AUTONEG_DISABLE) {
+ c.u.l1cfg.rcap = cpu_to_be32(lc->requested_speed | fc | mdi);
+ lc->fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX);
+ } else {
+ c.u.l1cfg.rcap = cpu_to_be32(lc->advertising | fc | mdi);
+ }
+
+ return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
+}
+
+/**
+ * t4_flash_cfg_addr - return the address of the flash configuration file
+ * @adapter: the adapter
+ *
+ * Return the address within the flash where the Firmware Configuration
+ * File is stored, or an error if the device FLASH is too small to contain
+ * a Firmware Configuration File.
+ */
+int t4_flash_cfg_addr(struct adapter *adapter)
+{
+ /*
+ * If the device FLASH isn't large enough to hold a Firmware
+ * Configuration File, return an error.
+ */
+ if (adapter->params.sf_size < FLASH_CFG_START + FLASH_CFG_MAX_SIZE)
+ return -ENOSPC;
+
+ return FLASH_CFG_START;
+}
+
+#define PF_INTR_MASK (F_PFSW | F_PFCIM)
+
+/**
+ * t4_intr_enable - enable interrupts
+ * @adapter: the adapter whose interrupts should be enabled
+ *
+ * Enable PF-specific interrupts for the calling function and the top-level
+ * interrupt concentrator for global interrupts. Interrupts are already
+ * enabled at each module, here we just enable the roots of the interrupt
+ * hierarchies.
+ *
+ * Note: this function should be called only when the driver manages
+ * non PF-specific interrupts from the various HW modules. Only one PCI
+ * function at a time should be doing this.
+ */
+void t4_intr_enable(struct adapter *adapter)
+{
+ u32 val = 0;
+ u32 pf = G_SOURCEPF(t4_read_reg(adapter, A_PL_WHOAMI));
+
+ if (CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5)
+ val = F_ERR_DROPPED_DB | F_ERR_EGR_CTXT_PRIO | F_DBFIFO_HP_INT;
+ t4_write_reg(adapter, A_SGE_INT_ENABLE3, F_ERR_CPL_EXCEED_IQE_SIZE |
+ F_ERR_INVALID_CIDX_INC | F_ERR_CPL_OPCODE_0 |
+ F_ERR_DATA_CPL_ON_HIGH_QID1 | F_INGRESS_SIZE_ERR |
+ F_ERR_DATA_CPL_ON_HIGH_QID0 | F_ERR_BAD_DB_PIDX3 |
+ F_ERR_BAD_DB_PIDX2 | F_ERR_BAD_DB_PIDX1 |
+ F_ERR_BAD_DB_PIDX0 | F_ERR_ING_CTXT_PRIO |
+ F_DBFIFO_LP_INT | F_EGRESS_SIZE_ERR | val);
+ t4_write_reg(adapter, MYPF_REG(A_PL_PF_INT_ENABLE), PF_INTR_MASK);
+ t4_set_reg_field(adapter, A_PL_INT_MAP0, 0, 1 << pf);
+}
+
+/**
+ * t4_intr_disable - disable interrupts
+ * @adapter: the adapter whose interrupts should be disabled
+ *
+ * Disable interrupts. We only disable the top-level interrupt
+ * concentrators. The caller must be a PCI function managing global
+ * interrupts.
+ */
+void t4_intr_disable(struct adapter *adapter)
+{
+ u32 pf = G_SOURCEPF(t4_read_reg(adapter, A_PL_WHOAMI));
+
+ t4_write_reg(adapter, MYPF_REG(A_PL_PF_INT_ENABLE), 0);
+ t4_set_reg_field(adapter, A_PL_INT_MAP0, 1 << pf, 0);
+}
+
+/**
+ * t4_get_port_type_description - return Port Type string description
+ * @port_type: firmware Port Type enumeration
+ */
+const char *t4_get_port_type_description(enum fw_port_type port_type)
+{
+ static const char * const port_type_description[] = {
+ "Fiber_XFI",
+ "Fiber_XAUI",
+ "BT_SGMII",
+ "BT_XFI",
+ "BT_XAUI",
+ "KX4",
+ "CX4",
+ "KX",
+ "KR",
+ "SFP",
+ "BP_AP",
+ "BP4_AP",
+ "QSFP_10G",
+ "QSA",
+ "QSFP",
+ "BP40_BA",
+ };
+
+ if (port_type < ARRAY_SIZE(port_type_description))
+ return port_type_description[port_type];
+ return "UNKNOWN";
+}
+
+/**
+ * t4_get_mps_bg_map - return the buffer groups associated with a port
+ * @adap: the adapter
+ * @idx: the port index
+ *
+ * Returns a bitmap indicating which MPS buffer groups are associated
+ * with the given port. Bit i is set if buffer group i is used by the
+ * port.
+ */
+unsigned int t4_get_mps_bg_map(struct adapter *adap, int idx)
+{
+ u32 n = G_NUMPORTS(t4_read_reg(adap, A_MPS_CMN_CTL));
+
+ if (n == 0)
+ return idx == 0 ? 0xf : 0;
+ if (n == 1)
+ return idx < 2 ? (3 << (2 * idx)) : 0;
+ return 1 << idx;
+}
+
+/**
+ * t4_get_port_stats - collect port statistics
+ * @adap: the adapter
+ * @idx: the port index
+ * @p: the stats structure to fill
+ *
+ * Collect statistics related to the given port from HW.
+ */
+void t4_get_port_stats(struct adapter *adap, int idx, struct port_stats *p)
+{
+ u32 bgmap = t4_get_mps_bg_map(adap, idx);
+
+#define GET_STAT(name) \
+ t4_read_reg64(adap, \
+ (is_t4(adap->params.chip) ? \
+ PORT_REG(idx, A_MPS_PORT_STAT_##name##_L) :\
+ T5_PORT_REG(idx, A_MPS_PORT_STAT_##name##_L)))
+#define GET_STAT_COM(name) t4_read_reg64(adap, A_MPS_STAT_##name##_L)
+
+ p->tx_octets = GET_STAT(TX_PORT_BYTES);
+ p->tx_frames = GET_STAT(TX_PORT_FRAMES);
+ p->tx_bcast_frames = GET_STAT(TX_PORT_BCAST);
+ p->tx_mcast_frames = GET_STAT(TX_PORT_MCAST);
+ p->tx_ucast_frames = GET_STAT(TX_PORT_UCAST);
+ p->tx_error_frames = GET_STAT(TX_PORT_ERROR);
+ p->tx_frames_64 = GET_STAT(TX_PORT_64B);
+ p->tx_frames_65_127 = GET_STAT(TX_PORT_65B_127B);
+ p->tx_frames_128_255 = GET_STAT(TX_PORT_128B_255B);
+ p->tx_frames_256_511 = GET_STAT(TX_PORT_256B_511B);
+ p->tx_frames_512_1023 = GET_STAT(TX_PORT_512B_1023B);
+ p->tx_frames_1024_1518 = GET_STAT(TX_PORT_1024B_1518B);
+ p->tx_frames_1519_max = GET_STAT(TX_PORT_1519B_MAX);
+ p->tx_drop = GET_STAT(TX_PORT_DROP);
+ p->tx_pause = GET_STAT(TX_PORT_PAUSE);
+ p->tx_ppp0 = GET_STAT(TX_PORT_PPP0);
+ p->tx_ppp1 = GET_STAT(TX_PORT_PPP1);
+ p->tx_ppp2 = GET_STAT(TX_PORT_PPP2);
+ p->tx_ppp3 = GET_STAT(TX_PORT_PPP3);
+ p->tx_ppp4 = GET_STAT(TX_PORT_PPP4);
+ p->tx_ppp5 = GET_STAT(TX_PORT_PPP5);
+ p->tx_ppp6 = GET_STAT(TX_PORT_PPP6);
+ p->tx_ppp7 = GET_STAT(TX_PORT_PPP7);
+
+ p->rx_octets = GET_STAT(RX_PORT_BYTES);
+ p->rx_frames = GET_STAT(RX_PORT_FRAMES);
+ p->rx_bcast_frames = GET_STAT(RX_PORT_BCAST);
+ p->rx_mcast_frames = GET_STAT(RX_PORT_MCAST);
+ p->rx_ucast_frames = GET_STAT(RX_PORT_UCAST);
+ p->rx_too_long = GET_STAT(RX_PORT_MTU_ERROR);
+ p->rx_jabber = GET_STAT(RX_PORT_MTU_CRC_ERROR);
+ p->rx_fcs_err = GET_STAT(RX_PORT_CRC_ERROR);
+ p->rx_len_err = GET_STAT(RX_PORT_LEN_ERROR);
+ p->rx_symbol_err = GET_STAT(RX_PORT_SYM_ERROR);
+ p->rx_runt = GET_STAT(RX_PORT_LESS_64B);
+ p->rx_frames_64 = GET_STAT(RX_PORT_64B);
+ p->rx_frames_65_127 = GET_STAT(RX_PORT_65B_127B);
+ p->rx_frames_128_255 = GET_STAT(RX_PORT_128B_255B);
+ p->rx_frames_256_511 = GET_STAT(RX_PORT_256B_511B);
+ p->rx_frames_512_1023 = GET_STAT(RX_PORT_512B_1023B);
+ p->rx_frames_1024_1518 = GET_STAT(RX_PORT_1024B_1518B);
+ p->rx_frames_1519_max = GET_STAT(RX_PORT_1519B_MAX);
+ p->rx_pause = GET_STAT(RX_PORT_PAUSE);
+ p->rx_ppp0 = GET_STAT(RX_PORT_PPP0);
+ p->rx_ppp1 = GET_STAT(RX_PORT_PPP1);
+ p->rx_ppp2 = GET_STAT(RX_PORT_PPP2);
+ p->rx_ppp3 = GET_STAT(RX_PORT_PPP3);
+ p->rx_ppp4 = GET_STAT(RX_PORT_PPP4);
+ p->rx_ppp5 = GET_STAT(RX_PORT_PPP5);
+ p->rx_ppp6 = GET_STAT(RX_PORT_PPP6);
+ p->rx_ppp7 = GET_STAT(RX_PORT_PPP7);
+ p->rx_ovflow0 = (bgmap & 1) ? GET_STAT_COM(RX_BG_0_MAC_DROP_FRAME) : 0;
+ p->rx_ovflow1 = (bgmap & 2) ? GET_STAT_COM(RX_BG_1_MAC_DROP_FRAME) : 0;
+ p->rx_ovflow2 = (bgmap & 4) ? GET_STAT_COM(RX_BG_2_MAC_DROP_FRAME) : 0;
+ p->rx_ovflow3 = (bgmap & 8) ? GET_STAT_COM(RX_BG_3_MAC_DROP_FRAME) : 0;
+ p->rx_trunc0 = (bgmap & 1) ? GET_STAT_COM(RX_BG_0_MAC_TRUNC_FRAME) : 0;
+ p->rx_trunc1 = (bgmap & 2) ? GET_STAT_COM(RX_BG_1_MAC_TRUNC_FRAME) : 0;
+ p->rx_trunc2 = (bgmap & 4) ? GET_STAT_COM(RX_BG_2_MAC_TRUNC_FRAME) : 0;
+ p->rx_trunc3 = (bgmap & 8) ? GET_STAT_COM(RX_BG_3_MAC_TRUNC_FRAME) : 0;
+
+#undef GET_STAT
+#undef GET_STAT_COM
+}
+
+/**
+ * t4_get_port_stats_offset - collect port stats relative to a previous snapshot
+ * @adap: The adapter
+ * @idx: The port
+ * @stats: Current stats to fill
+ * @offset: Previous stats snapshot
+ */
+void t4_get_port_stats_offset(struct adapter *adap, int idx,
+ struct port_stats *stats,
+ struct port_stats *offset)
+{
+ u64 *s, *o;
+ unsigned int i;
+
+ t4_get_port_stats(adap, idx, stats);
+ for (i = 0, s = (u64 *)stats, o = (u64 *)offset;
+ i < (sizeof(struct port_stats) / sizeof(u64));
+ i++, s++, o++)
+ *s -= *o;
+}
+
+/**
+ * t4_clr_port_stats - clear port statistics
+ * @adap: the adapter
+ * @idx: the port index
+ *
+ * Clear HW statistics for the given port.
+ */
+void t4_clr_port_stats(struct adapter *adap, int idx)
+{
+ unsigned int i;
+ u32 bgmap = t4_get_mps_bg_map(adap, idx);
+ u32 port_base_addr;
+
+ if (is_t4(adap->params.chip))
+ port_base_addr = PORT_BASE(idx);
+ else
+ port_base_addr = T5_PORT_BASE(idx);
+
+ for (i = A_MPS_PORT_STAT_TX_PORT_BYTES_L;
+ i <= A_MPS_PORT_STAT_TX_PORT_PPP7_H; i += 8)
+ t4_write_reg(adap, port_base_addr + i, 0);
+ for (i = A_MPS_PORT_STAT_RX_PORT_BYTES_L;
+ i <= A_MPS_PORT_STAT_RX_PORT_LESS_64B_H; i += 8)
+ t4_write_reg(adap, port_base_addr + i, 0);
+ for (i = 0; i < 4; i++)
+ if (bgmap & (1 << i)) {
+ t4_write_reg(adap,
+ A_MPS_STAT_RX_BG_0_MAC_DROP_FRAME_L +
+ i * 8, 0);
+ t4_write_reg(adap,
+ A_MPS_STAT_RX_BG_0_MAC_TRUNC_FRAME_L +
+ i * 8, 0);
+ }
+}
+
+/**
+ * t4_fw_hello - establish communication with FW
+ * @adap: the adapter
+ * @mbox: mailbox to use for the FW command
+ * @evt_mbox: mailbox to receive async FW events
+ * @master: specifies the caller's willingness to be the device master
+ * @state: returns the current device state (if non-NULL)
+ *
+ * Issues a command to establish communication with FW. Returns either
+ * an error (negative integer) or the mailbox of the Master PF.
+ */
+int t4_fw_hello(struct adapter *adap, unsigned int mbox, unsigned int evt_mbox,
+ enum dev_master master, enum dev_state *state)
+{
+ int ret;
+ struct fw_hello_cmd c;
+ u32 v;
+ unsigned int master_mbox;
+ int retries = FW_CMD_HELLO_RETRIES;
+
+retry:
+ memset(&c, 0, sizeof(c));
+ INIT_CMD(c, HELLO, WRITE);
+ c.err_to_clearinit = cpu_to_be32(
+ V_FW_HELLO_CMD_MASTERDIS(master == MASTER_CANT) |
+ V_FW_HELLO_CMD_MASTERFORCE(master == MASTER_MUST) |
+ V_FW_HELLO_CMD_MBMASTER(master == MASTER_MUST ? mbox :
+ M_FW_HELLO_CMD_MBMASTER) |
+ V_FW_HELLO_CMD_MBASYNCNOT(evt_mbox) |
+ V_FW_HELLO_CMD_STAGE(FW_HELLO_CMD_STAGE_OS) |
+ F_FW_HELLO_CMD_CLEARINIT);
+
+ /*
+ * Issue the HELLO command to the firmware. If it's not successful
+ * but indicates that we got a "busy" or "timeout" condition, retry
+ * the HELLO until we exhaust our retry limit. If we do exceed our
+ * retry limit, check to see if the firmware left us any error
+ * information and report that if so ...
+ */
+ ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
+ if (ret != FW_SUCCESS) {
+ if ((ret == -EBUSY || ret == -ETIMEDOUT) && retries-- > 0)
+ goto retry;
+ if (t4_read_reg(adap, A_PCIE_FW) & F_PCIE_FW_ERR)
+ t4_report_fw_error(adap);
+ return ret;
+ }
+
+ v = be32_to_cpu(c.err_to_clearinit);
+ master_mbox = G_FW_HELLO_CMD_MBMASTER(v);
+ if (state) {
+ if (v & F_FW_HELLO_CMD_ERR)
+ *state = DEV_STATE_ERR;
+ else if (v & F_FW_HELLO_CMD_INIT)
+ *state = DEV_STATE_INIT;
+ else
+ *state = DEV_STATE_UNINIT;
+ }
+
+ /*
+ * If we're not the Master PF then we need to wait around for the
+ * Master PF Driver to finish setting up the adapter.
+ *
+ * Note that we also do this wait if we're a non-Master-capable PF and
+ * there is no current Master PF; a Master PF may show up momentarily
+ * and we wouldn't want to fail pointlessly. (This can happen when an
+ * OS loads lots of different drivers rapidly at the same time). In
+ * this case, the Master PF returned by the firmware will be
+ * M_PCIE_FW_MASTER so the test below will work ...
+ */
+ if ((v & (F_FW_HELLO_CMD_ERR | F_FW_HELLO_CMD_INIT)) == 0 &&
+ master_mbox != mbox) {
+ int waiting = FW_CMD_HELLO_TIMEOUT;
+
+ /*
+ * Wait for the firmware to either indicate an error or
+ * initialized state. If we see either of these we bail out
+ * and report the issue to the caller. If we exhaust the
+ * "hello timeout" and we haven't exhausted our retries, try
+ * again. Otherwise bail with a timeout error.
+ */
+ for (;;) {
+ u32 pcie_fw;
+
+ msleep(50);
+ waiting -= 50;
+
+ /*
+ * If neither Error nor Initialialized are indicated
+ * by the firmware keep waiting till we exaust our
+ * timeout ... and then retry if we haven't exhausted
+ * our retries ...
+ */
+ pcie_fw = t4_read_reg(adap, A_PCIE_FW);
+ if (!(pcie_fw & (F_PCIE_FW_ERR | F_PCIE_FW_INIT))) {
+ if (waiting <= 0) {
+ if (retries-- > 0)
+ goto retry;
+
+ return -ETIMEDOUT;
+ }
+ continue;
+ }
+
+ /*
+ * We either have an Error or Initialized condition
+ * report errors preferentially.
+ */
+ if (state) {
+ if (pcie_fw & F_PCIE_FW_ERR)
+ *state = DEV_STATE_ERR;
+ else if (pcie_fw & F_PCIE_FW_INIT)
+ *state = DEV_STATE_INIT;
+ }
+
+ /*
+ * If we arrived before a Master PF was selected and
+ * there's not a valid Master PF, grab its identity
+ * for our caller.
+ */
+ if (master_mbox == M_PCIE_FW_MASTER &&
+ (pcie_fw & F_PCIE_FW_MASTER_VLD))
+ master_mbox = G_PCIE_FW_MASTER(pcie_fw);
+ break;
+ }
+ }
+
+ return master_mbox;
+}
+
+/**
+ * t4_fw_bye - end communication with FW
+ * @adap: the adapter
+ * @mbox: mailbox to use for the FW command
+ *
+ * Issues a command to terminate communication with FW.
+ */
+int t4_fw_bye(struct adapter *adap, unsigned int mbox)
+{
+ struct fw_bye_cmd c;
+
+ memset(&c, 0, sizeof(c));
+ INIT_CMD(c, BYE, WRITE);
+ return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
+}
+
+/**
+ * t4_fw_reset - issue a reset to FW
+ * @adap: the adapter
+ * @mbox: mailbox to use for the FW command
+ * @reset: specifies the type of reset to perform
+ *
+ * Issues a reset command of the specified type to FW.
+ */
+int t4_fw_reset(struct adapter *adap, unsigned int mbox, int reset)
+{
+ struct fw_reset_cmd c;
+
+ memset(&c, 0, sizeof(c));
+ INIT_CMD(c, RESET, WRITE);
+ c.val = cpu_to_be32(reset);
+ return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
+}
+
+/**
+ * t4_fw_halt - issue a reset/halt to FW and put uP into RESET
+ * @adap: the adapter
+ * @mbox: mailbox to use for the FW RESET command (if desired)
+ * @force: force uP into RESET even if FW RESET command fails
+ *
+ * Issues a RESET command to firmware (if desired) with a HALT indication
+ * and then puts the microprocessor into RESET state. The RESET command
+ * will only be issued if a legitimate mailbox is provided (mbox <=
+ * M_PCIE_FW_MASTER).
+ *
+ * This is generally used in order for the host to safely manipulate the
+ * adapter without fear of conflicting with whatever the firmware might
+ * be doing. The only way out of this state is to RESTART the firmware
+ * ...
+ */
+int t4_fw_halt(struct adapter *adap, unsigned int mbox, int force)
+{
+ int ret = 0;
+
+ /*
+ * If a legitimate mailbox is provided, issue a RESET command
+ * with a HALT indication.
+ */
+ if (mbox <= M_PCIE_FW_MASTER) {
+ struct fw_reset_cmd c;
+
+ memset(&c, 0, sizeof(c));
+ INIT_CMD(c, RESET, WRITE);
+ c.val = cpu_to_be32(F_PIORST | F_PIORSTMODE);
+ c.halt_pkd = cpu_to_be32(F_FW_RESET_CMD_HALT);
+ ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
+ }
+
+ /*
+ * Normally we won't complete the operation if the firmware RESET
+ * command fails but if our caller insists we'll go ahead and put the
+ * uP into RESET. This can be useful if the firmware is hung or even
+ * missing ... We'll have to take the risk of putting the uP into
+ * RESET without the cooperation of firmware in that case.
+ *
+ * We also force the firmware's HALT flag to be on in case we bypassed
+ * the firmware RESET command above or we're dealing with old firmware
+ * which doesn't have the HALT capability. This will serve as a flag
+ * for the incoming firmware to know that it's coming out of a HALT
+ * rather than a RESET ... if it's new enough to understand that ...
+ */
+ if (ret == 0 || force) {
+ t4_set_reg_field(adap, A_CIM_BOOT_CFG, F_UPCRST, F_UPCRST);
+ t4_set_reg_field(adap, A_PCIE_FW, F_PCIE_FW_HALT,
+ F_PCIE_FW_HALT);
+ }
+
+ /*
+ * And we always return the result of the firmware RESET command
+ * even when we force the uP into RESET ...
+ */
+ return ret;
+}
+
+/**
+ * t4_fw_restart - restart the firmware by taking the uP out of RESET
+ * @adap: the adapter
+ * @mbox: mailbox to use for the FW RESET command (if desired)
+ * @reset: if we want to do a RESET to restart things
+ *
+ * Restart firmware previously halted by t4_fw_halt(). On successful
+ * return the previous PF Master remains as the new PF Master and there
+ * is no need to issue a new HELLO command, etc.
+ *
+ * We do this in two ways:
+ *
+ * 1. If we're dealing with newer firmware we'll simply want to take
+ * the chip's microprocessor out of RESET. This will cause the
+ * firmware to start up from its start vector. And then we'll loop
+ * until the firmware indicates it's started again (PCIE_FW.HALT
+ * reset to 0) or we timeout.
+ *
+ * 2. If we're dealing with older firmware then we'll need to RESET
+ * the chip since older firmware won't recognize the PCIE_FW.HALT
+ * flag and automatically RESET itself on startup.
+ */
+int t4_fw_restart(struct adapter *adap, unsigned int mbox, int reset)
+{
+ if (reset) {
+ /*
+ * Since we're directing the RESET instead of the firmware
+ * doing it automatically, we need to clear the PCIE_FW.HALT
+ * bit.
+ */
+ t4_set_reg_field(adap, A_PCIE_FW, F_PCIE_FW_HALT, 0);
+
+ /*
+ * If we've been given a valid mailbox, first try to get the
+ * firmware to do the RESET. If that works, great and we can
+ * return success. Otherwise, if we haven't been given a
+ * valid mailbox or the RESET command failed, fall back to
+ * hitting the chip with a hammer.
+ */
+ if (mbox <= M_PCIE_FW_MASTER) {
+ t4_set_reg_field(adap, A_CIM_BOOT_CFG, F_UPCRST, 0);
+ msleep(100);
+ if (t4_fw_reset(adap, mbox,
+ F_PIORST | F_PIORSTMODE) == 0)
+ return 0;
+ }
+
+ t4_write_reg(adap, A_PL_RST, F_PIORST | F_PIORSTMODE);
+ msleep(2000);
+ } else {
+ int ms;
+
+ t4_set_reg_field(adap, A_CIM_BOOT_CFG, F_UPCRST, 0);
+ for (ms = 0; ms < FW_CMD_MAX_TIMEOUT; ) {
+ if (!(t4_read_reg(adap, A_PCIE_FW) & F_PCIE_FW_HALT))
+ return FW_SUCCESS;
+ msleep(100);
+ ms += 100;
+ }
+ return -ETIMEDOUT;
+ }
+ return 0;
+}
+
+/**
+ * t4_fixup_host_params_compat - fix up host-dependent parameters
+ * @adap: the adapter
+ * @page_size: the host's Base Page Size
+ * @cache_line_size: the host's Cache Line Size
+ * @chip_compat: maintain compatibility with designated chip
+ *
+ * Various registers in the chip contain values which are dependent on the
+ * host's Base Page and Cache Line Sizes. This function will fix all of
+ * those registers with the appropriate values as passed in ...
+ *
+ * @chip_compat is used to limit the set of changes that are made
+ * to be compatible with the indicated chip release. This is used by
+ * drivers to maintain compatibility with chip register settings when
+ * the drivers haven't [yet] been updated with new chip support.
+ */
+int t4_fixup_host_params_compat(struct adapter *adap,
+ unsigned int page_size,
+ unsigned int cache_line_size,
+ enum chip_type chip_compat)
+{
+ unsigned int page_shift = cxgbe_fls(page_size) - 1;
+ unsigned int sge_hps = page_shift - 10;
+ unsigned int stat_len = cache_line_size > 64 ? 128 : 64;
+ unsigned int fl_align = cache_line_size < 32 ? 32 : cache_line_size;
+ unsigned int fl_align_log = cxgbe_fls(fl_align) - 1;
+
+ t4_write_reg(adap, A_SGE_HOST_PAGE_SIZE,
+ V_HOSTPAGESIZEPF0(sge_hps) |
+ V_HOSTPAGESIZEPF1(sge_hps) |
+ V_HOSTPAGESIZEPF2(sge_hps) |
+ V_HOSTPAGESIZEPF3(sge_hps) |
+ V_HOSTPAGESIZEPF4(sge_hps) |
+ V_HOSTPAGESIZEPF5(sge_hps) |
+ V_HOSTPAGESIZEPF6(sge_hps) |
+ V_HOSTPAGESIZEPF7(sge_hps));
+
+ if (is_t4(adap->params.chip) || is_t4(chip_compat))
+ t4_set_reg_field(adap, A_SGE_CONTROL,
+ V_INGPADBOUNDARY(M_INGPADBOUNDARY) |
+ F_EGRSTATUSPAGESIZE,
+ V_INGPADBOUNDARY(fl_align_log -
+ X_INGPADBOUNDARY_SHIFT) |
+ V_EGRSTATUSPAGESIZE(stat_len != 64));
+ else {
+ /*
+ * T5 introduced the separation of the Free List Padding and
+ * Packing Boundaries. Thus, we can select a smaller Padding
+ * Boundary to avoid uselessly chewing up PCIe Link and Memory
+ * Bandwidth, and use a Packing Boundary which is large enough
+ * to avoid false sharing between CPUs, etc.
+ *
+ * For the PCI Link, the smaller the Padding Boundary the
+ * better. For the Memory Controller, a smaller Padding
+ * Boundary is better until we cross under the Memory Line
+ * Size (the minimum unit of transfer to/from Memory). If we
+ * have a Padding Boundary which is smaller than the Memory
+ * Line Size, that'll involve a Read-Modify-Write cycle on the
+ * Memory Controller which is never good. For T5 the smallest
+ * Padding Boundary which we can select is 32 bytes which is
+ * larger than any known Memory Controller Line Size so we'll
+ * use that.
+ */
+
+ /*
+ * N.B. T5 has a different interpretation of the "0" value for
+ * the Packing Boundary. This corresponds to 16 bytes instead
+ * of the expected 32 bytes. We never have a Packing Boundary
+ * less than 32 bytes so we can't use that special value but
+ * on the other hand, if we wanted 32 bytes, the best we can
+ * really do is 64 bytes ...
+ */
+ if (fl_align <= 32) {
+ fl_align = 64;
+ fl_align_log = 6;
+ }
+ t4_set_reg_field(adap, A_SGE_CONTROL,
+ V_INGPADBOUNDARY(M_INGPADBOUNDARY) |
+ F_EGRSTATUSPAGESIZE,
+ V_INGPADBOUNDARY(X_INGPCIEBOUNDARY_32B) |
+ V_EGRSTATUSPAGESIZE(stat_len != 64));
+ t4_set_reg_field(adap, A_SGE_CONTROL2,
+ V_INGPACKBOUNDARY(M_INGPACKBOUNDARY),
+ V_INGPACKBOUNDARY(fl_align_log -
+ X_INGPACKBOUNDARY_SHIFT));
+ }
+
+ /*
+ * Adjust various SGE Free List Host Buffer Sizes.
+ *
+ * The first four entries are:
+ *
+ * 0: Host Page Size
+ * 1: 64KB
+ * 2: Buffer size corresponding to 1500 byte MTU (unpacked mode)
+ * 3: Buffer size corresponding to 9000 byte MTU (unpacked mode)
+ *
+ * For the single-MTU buffers in unpacked mode we need to include
+ * space for the SGE Control Packet Shift, 14 byte Ethernet header,
+ * possible 4 byte VLAN tag, all rounded up to the next Ingress Packet
+ * Padding boundary. All of these are accommodated in the Factory
+ * Default Firmware Configuration File but we need to adjust it for
+ * this host's cache line size.
+ */
+ t4_write_reg(adap, A_SGE_FL_BUFFER_SIZE0, page_size);
+ t4_write_reg(adap, A_SGE_FL_BUFFER_SIZE2,
+ (t4_read_reg(adap, A_SGE_FL_BUFFER_SIZE2) + fl_align - 1)
+ & ~(fl_align - 1));
+ t4_write_reg(adap, A_SGE_FL_BUFFER_SIZE3,
+ (t4_read_reg(adap, A_SGE_FL_BUFFER_SIZE3) + fl_align - 1)
+ & ~(fl_align - 1));
+
+ t4_write_reg(adap, A_ULP_RX_TDDP_PSZ, V_HPZ0(page_shift - 12));
+
+ return 0;
+}
+
+/**
+ * t4_fixup_host_params - fix up host-dependent parameters (T4 compatible)
+ * @adap: the adapter
+ * @page_size: the host's Base Page Size
+ * @cache_line_size: the host's Cache Line Size
+ *
+ * Various registers in T4 contain values which are dependent on the
+ * host's Base Page and Cache Line Sizes. This function will fix all of
+ * those registers with the appropriate values as passed in ...
+ *
+ * This routine makes changes which are compatible with T4 chips.
+ */
+int t4_fixup_host_params(struct adapter *adap, unsigned int page_size,
+ unsigned int cache_line_size)
+{
+ return t4_fixup_host_params_compat(adap, page_size, cache_line_size,
+ T4_LAST_REV);
+}
+
+/**
+ * t4_fw_initialize - ask FW to initialize the device
+ * @adap: the adapter
+ * @mbox: mailbox to use for the FW command
+ *
+ * Issues a command to FW to partially initialize the device. This
+ * performs initialization that generally doesn't depend on user input.
+ */
+int t4_fw_initialize(struct adapter *adap, unsigned int mbox)
+{
+ struct fw_initialize_cmd c;
+
+ memset(&c, 0, sizeof(c));
+ INIT_CMD(c, INITIALIZE, WRITE);
+ return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
+}
+
+/**
+ * t4_query_params_rw - query FW or device parameters
+ * @adap: the adapter
+ * @mbox: mailbox to use for the FW command
+ * @pf: the PF
+ * @vf: the VF
+ * @nparams: the number of parameters
+ * @params: the parameter names
+ * @val: the parameter values
+ * @rw: Write and read flag
+ *
+ * Reads the value of FW or device parameters. Up to 7 parameters can be
+ * queried at once.
+ */
+static int t4_query_params_rw(struct adapter *adap, unsigned int mbox,
+ unsigned int pf, unsigned int vf,
+ unsigned int nparams, const u32 *params,
+ u32 *val, int rw)
+{
+ unsigned int i;
+ int ret;
+ struct fw_params_cmd c;
+ __be32 *p = &c.param[0].mnem;
+
+ if (nparams > 7)
+ return -EINVAL;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_PARAMS_CMD) |
+ F_FW_CMD_REQUEST | F_FW_CMD_READ |
+ V_FW_PARAMS_CMD_PFN(pf) |
+ V_FW_PARAMS_CMD_VFN(vf));
+ c.retval_len16 = cpu_to_be32(FW_LEN16(c));
+
+ for (i = 0; i < nparams; i++) {
+ *p++ = cpu_to_be32(*params++);
+ if (rw)
+ *p = cpu_to_be32(*(val + i));
+ p++;
+ }
+
+ ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
+ if (ret == 0)
+ for (i = 0, p = &c.param[0].val; i < nparams; i++, p += 2)
+ *val++ = be32_to_cpu(*p);
+ return ret;
+}
+
+int t4_query_params(struct adapter *adap, unsigned int mbox, unsigned int pf,
+ unsigned int vf, unsigned int nparams, const u32 *params,
+ u32 *val)
+{
+ return t4_query_params_rw(adap, mbox, pf, vf, nparams, params, val, 0);
+}
+
+/**
+ * t4_set_params_timeout - sets FW or device parameters
+ * @adap: the adapter
+ * @mbox: mailbox to use for the FW command
+ * @pf: the PF
+ * @vf: the VF
+ * @nparams: the number of parameters
+ * @params: the parameter names
+ * @val: the parameter values
+ * @timeout: the timeout time
+ *
+ * Sets the value of FW or device parameters. Up to 7 parameters can be
+ * specified at once.
+ */
+int t4_set_params_timeout(struct adapter *adap, unsigned int mbox,
+ unsigned int pf, unsigned int vf,
+ unsigned int nparams, const u32 *params,
+ const u32 *val, int timeout)
+{
+ struct fw_params_cmd c;
+ __be32 *p = &c.param[0].mnem;
+
+ if (nparams > 7)
+ return -EINVAL;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_PARAMS_CMD) |
+ F_FW_CMD_REQUEST | F_FW_CMD_WRITE |
+ V_FW_PARAMS_CMD_PFN(pf) |
+ V_FW_PARAMS_CMD_VFN(vf));
+ c.retval_len16 = cpu_to_be32(FW_LEN16(c));
+
+ while (nparams--) {
+ *p++ = cpu_to_be32(*params++);
+ *p++ = cpu_to_be32(*val++);
+ }
+
+ return t4_wr_mbox_timeout(adap, mbox, &c, sizeof(c), NULL, timeout);
+}
+
+int t4_set_params(struct adapter *adap, unsigned int mbox, unsigned int pf,
+ unsigned int vf, unsigned int nparams, const u32 *params,
+ const u32 *val)
+{
+ return t4_set_params_timeout(adap, mbox, pf, vf, nparams, params, val,
+ FW_CMD_MAX_TIMEOUT);
+}
+
+/**
+ * t4_alloc_vi_func - allocate a virtual interface
+ * @adap: the adapter
+ * @mbox: mailbox to use for the FW command
+ * @port: physical port associated with the VI
+ * @pf: the PF owning the VI
+ * @vf: the VF owning the VI
+ * @nmac: number of MAC addresses needed (1 to 5)
+ * @mac: the MAC addresses of the VI
+ * @rss_size: size of RSS table slice associated with this VI
+ * @portfunc: which Port Application Function MAC Address is desired
+ * @idstype: Intrusion Detection Type
+ *
+ * Allocates a virtual interface for the given physical port. If @mac is
+ * not %NULL it contains the MAC addresses of the VI as assigned by FW.
+ * @mac should be large enough to hold @nmac Ethernet addresses, they are
+ * stored consecutively so the space needed is @nmac * 6 bytes.
+ * Returns a negative error number or the non-negative VI id.
+ */
+int t4_alloc_vi_func(struct adapter *adap, unsigned int mbox,
+ unsigned int port, unsigned int pf, unsigned int vf,
+ unsigned int nmac, u8 *mac, unsigned int *rss_size,
+ unsigned int portfunc, unsigned int idstype)
+{
+ int ret;
+ struct fw_vi_cmd c;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_VI_CMD) | F_FW_CMD_REQUEST |
+ F_FW_CMD_WRITE | F_FW_CMD_EXEC |
+ V_FW_VI_CMD_PFN(pf) | V_FW_VI_CMD_VFN(vf));
+ c.alloc_to_len16 = cpu_to_be32(F_FW_VI_CMD_ALLOC | FW_LEN16(c));
+ c.type_to_viid = cpu_to_be16(V_FW_VI_CMD_TYPE(idstype) |
+ V_FW_VI_CMD_FUNC(portfunc));
+ c.portid_pkd = V_FW_VI_CMD_PORTID(port);
+ c.nmac = nmac - 1;
+
+ ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
+ if (ret)
+ return ret;
+
+ if (mac) {
+ memcpy(mac, c.mac, sizeof(c.mac));
+ switch (nmac) {
+ case 5:
+ memcpy(mac + 24, c.nmac3, sizeof(c.nmac3));
+ /* FALLTHROUGH */
+ case 4:
+ memcpy(mac + 18, c.nmac2, sizeof(c.nmac2));
+ /* FALLTHROUGH */
+ case 3:
+ memcpy(mac + 12, c.nmac1, sizeof(c.nmac1));
+ /* FALLTHROUGH */
+ case 2:
+ memcpy(mac + 6, c.nmac0, sizeof(c.nmac0));
+ /* FALLTHROUGH */
+ }
+ }
+ if (rss_size)
+ *rss_size = G_FW_VI_CMD_RSSSIZE(be16_to_cpu(c.norss_rsssize));
+ return G_FW_VI_CMD_VIID(cpu_to_be16(c.type_to_viid));
+}
+
+/**
+ * t4_alloc_vi - allocate an [Ethernet Function] virtual interface
+ * @adap: the adapter
+ * @mbox: mailbox to use for the FW command
+ * @port: physical port associated with the VI
+ * @pf: the PF owning the VI
+ * @vf: the VF owning the VI
+ * @nmac: number of MAC addresses needed (1 to 5)
+ * @mac: the MAC addresses of the VI
+ * @rss_size: size of RSS table slice associated with this VI
+ *
+ * Backwards compatible and convieniance routine to allocate a Virtual
+ * Interface with a Ethernet Port Application Function and Intrustion
+ * Detection System disabled.
+ */
+int t4_alloc_vi(struct adapter *adap, unsigned int mbox, unsigned int port,
+ unsigned int pf, unsigned int vf, unsigned int nmac, u8 *mac,
+ unsigned int *rss_size)
+{
+ return t4_alloc_vi_func(adap, mbox, port, pf, vf, nmac, mac, rss_size,
+ FW_VI_FUNC_ETH, 0);
+}
+
+/**
+ * t4_free_vi - free a virtual interface
+ * @adap: the adapter
+ * @mbox: mailbox to use for the FW command
+ * @pf: the PF owning the VI
+ * @vf: the VF owning the VI
+ * @viid: virtual interface identifiler
+ *
+ * Free a previously allocated virtual interface.
+ */
+int t4_free_vi(struct adapter *adap, unsigned int mbox, unsigned int pf,
+ unsigned int vf, unsigned int viid)
+{
+ struct fw_vi_cmd c;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_VI_CMD) | F_FW_CMD_REQUEST |
+ F_FW_CMD_EXEC | V_FW_VI_CMD_PFN(pf) |
+ V_FW_VI_CMD_VFN(vf));
+ c.alloc_to_len16 = cpu_to_be32(F_FW_VI_CMD_FREE | FW_LEN16(c));
+ c.type_to_viid = cpu_to_be16(V_FW_VI_CMD_VIID(viid));
+
+ return t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
+}
+
+/**
+ * t4_set_rxmode - set Rx properties of a virtual interface
+ * @adap: the adapter
+ * @mbox: mailbox to use for the FW command
+ * @viid: the VI id
+ * @mtu: the new MTU or -1
+ * @promisc: 1 to enable promiscuous mode, 0 to disable it, -1 no change
+ * @all_multi: 1 to enable all-multi mode, 0 to disable it, -1 no change
+ * @bcast: 1 to enable broadcast Rx, 0 to disable it, -1 no change
+ * @vlanex: 1 to enable hardware VLAN Tag extraction, 0 to disable it,
+ * -1 no change
+ * @sleep_ok: if true we may sleep while awaiting command completion
+ *
+ * Sets Rx properties of a virtual interface.
+ */
+int t4_set_rxmode(struct adapter *adap, unsigned int mbox, unsigned int viid,
+ int mtu, int promisc, int all_multi, int bcast, int vlanex,
+ bool sleep_ok)
+{
+ struct fw_vi_rxmode_cmd c;
+
+ /* convert to FW values */
+ if (mtu < 0)
+ mtu = M_FW_VI_RXMODE_CMD_MTU;
+ if (promisc < 0)
+ promisc = M_FW_VI_RXMODE_CMD_PROMISCEN;
+ if (all_multi < 0)
+ all_multi = M_FW_VI_RXMODE_CMD_ALLMULTIEN;
+ if (bcast < 0)
+ bcast = M_FW_VI_RXMODE_CMD_BROADCASTEN;
+ if (vlanex < 0)
+ vlanex = M_FW_VI_RXMODE_CMD_VLANEXEN;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_VI_RXMODE_CMD) |
+ F_FW_CMD_REQUEST | F_FW_CMD_WRITE |
+ V_FW_VI_RXMODE_CMD_VIID(viid));
+ c.retval_len16 = cpu_to_be32(FW_LEN16(c));
+ c.mtu_to_vlanexen = cpu_to_be32(V_FW_VI_RXMODE_CMD_MTU(mtu) |
+ V_FW_VI_RXMODE_CMD_PROMISCEN(promisc) |
+ V_FW_VI_RXMODE_CMD_ALLMULTIEN(all_multi) |
+ V_FW_VI_RXMODE_CMD_BROADCASTEN(bcast) |
+ V_FW_VI_RXMODE_CMD_VLANEXEN(vlanex));
+ return t4_wr_mbox_meat(adap, mbox, &c, sizeof(c), NULL, sleep_ok);
+}
+
+/**
+ * t4_change_mac - modifies the exact-match filter for a MAC address
+ * @adap: the adapter
+ * @mbox: mailbox to use for the FW command
+ * @viid: the VI id
+ * @idx: index of existing filter for old value of MAC address, or -1
+ * @addr: the new MAC address value
+ * @persist: whether a new MAC allocation should be persistent
+ * @add_smt: if true also add the address to the HW SMT
+ *
+ * Modifies an exact-match filter and sets it to the new MAC address if
+ * @idx >= 0, or adds the MAC address to a new filter if @idx < 0. In the
+ * latter case the address is added persistently if @persist is %true.
+ *
+ * Note that in general it is not possible to modify the value of a given
+ * filter so the generic way to modify an address filter is to free the one
+ * being used by the old address value and allocate a new filter for the
+ * new address value.
+ *
+ * Returns a negative error number or the index of the filter with the new
+ * MAC value. Note that this index may differ from @idx.
+ */
+int t4_change_mac(struct adapter *adap, unsigned int mbox, unsigned int viid,
+ int idx, const u8 *addr, bool persist, bool add_smt)
+{
+ int ret, mode;
+ struct fw_vi_mac_cmd c;
+ struct fw_vi_mac_exact *p = c.u.exact;
+ int max_mac_addr = adap->params.arch.mps_tcam_size;
+
+ if (idx < 0) /* new allocation */
+ idx = persist ? FW_VI_MAC_ADD_PERSIST_MAC : FW_VI_MAC_ADD_MAC;
+ mode = add_smt ? FW_VI_MAC_SMT_AND_MPSTCAM : FW_VI_MAC_MPS_TCAM_ENTRY;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_VI_MAC_CMD) |
+ F_FW_CMD_REQUEST | F_FW_CMD_WRITE |
+ V_FW_VI_MAC_CMD_VIID(viid));
+ c.freemacs_to_len16 = cpu_to_be32(V_FW_CMD_LEN16(1));
+ p->valid_to_idx = cpu_to_be16(F_FW_VI_MAC_CMD_VALID |
+ V_FW_VI_MAC_CMD_SMAC_RESULT(mode) |
+ V_FW_VI_MAC_CMD_IDX(idx));
+ memcpy(p->macaddr, addr, sizeof(p->macaddr));
+
+ ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
+ if (ret == 0) {
+ ret = G_FW_VI_MAC_CMD_IDX(be16_to_cpu(p->valid_to_idx));
+ if (ret >= max_mac_addr)
+ ret = -ENOMEM;
+ }
+ return ret;
+}
+
+/**
+ * t4_enable_vi_params - enable/disable a virtual interface
+ * @adap: the adapter
+ * @mbox: mailbox to use for the FW command
+ * @viid: the VI id
+ * @rx_en: 1=enable Rx, 0=disable Rx
+ * @tx_en: 1=enable Tx, 0=disable Tx
+ * @dcb_en: 1=enable delivery of Data Center Bridging messages.
+ *
+ * Enables/disables a virtual interface. Note that setting DCB Enable
+ * only makes sense when enabling a Virtual Interface ...
+ */
+int t4_enable_vi_params(struct adapter *adap, unsigned int mbox,
+ unsigned int viid, bool rx_en, bool tx_en, bool dcb_en)
+{
+ struct fw_vi_enable_cmd c;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_VI_ENABLE_CMD) |
+ F_FW_CMD_REQUEST | F_FW_CMD_EXEC |
+ V_FW_VI_ENABLE_CMD_VIID(viid));
+ c.ien_to_len16 = cpu_to_be32(V_FW_VI_ENABLE_CMD_IEN(rx_en) |
+ V_FW_VI_ENABLE_CMD_EEN(tx_en) |
+ V_FW_VI_ENABLE_CMD_DCB_INFO(dcb_en) |
+ FW_LEN16(c));
+ return t4_wr_mbox_ns(adap, mbox, &c, sizeof(c), NULL);
+}
+
+/**
+ * t4_enable_vi - enable/disable a virtual interface
+ * @adap: the adapter
+ * @mbox: mailbox to use for the FW command
+ * @viid: the VI id
+ * @rx_en: 1=enable Rx, 0=disable Rx
+ * @tx_en: 1=enable Tx, 0=disable Tx
+ *
+ * Enables/disables a virtual interface. Note that setting DCB Enable
+ * only makes sense when enabling a Virtual Interface ...
+ */
+int t4_enable_vi(struct adapter *adap, unsigned int mbox, unsigned int viid,
+ bool rx_en, bool tx_en)
+{
+ return t4_enable_vi_params(adap, mbox, viid, rx_en, tx_en, 0);
+}
+
+/**
+ * t4_iq_start_stop - enable/disable an ingress queue and its FLs
+ * @adap: the adapter
+ * @mbox: mailbox to use for the FW command
+ * @start: %true to enable the queues, %false to disable them
+ * @pf: the PF owning the queues
+ * @vf: the VF owning the queues
+ * @iqid: ingress queue id
+ * @fl0id: FL0 queue id or 0xffff if no attached FL0
+ * @fl1id: FL1 queue id or 0xffff if no attached FL1
+ *
+ * Starts or stops an ingress queue and its associated FLs, if any.
+ */
+int t4_iq_start_stop(struct adapter *adap, unsigned int mbox, bool start,
+ unsigned int pf, unsigned int vf, unsigned int iqid,
+ unsigned int fl0id, unsigned int fl1id)
+{
+ struct fw_iq_cmd c;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_IQ_CMD) | F_FW_CMD_REQUEST |
+ F_FW_CMD_EXEC | V_FW_IQ_CMD_PFN(pf) |
+ V_FW_IQ_CMD_VFN(vf));
+ c.alloc_to_len16 = cpu_to_be32(V_FW_IQ_CMD_IQSTART(start) |
+ V_FW_IQ_CMD_IQSTOP(!start) |
+ FW_LEN16(c));
+ c.iqid = cpu_to_be16(iqid);
+ c.fl0id = cpu_to_be16(fl0id);
+ c.fl1id = cpu_to_be16(fl1id);
+ return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
+}
+
+/**
+ * t4_iq_free - free an ingress queue and its FLs
+ * @adap: the adapter
+ * @mbox: mailbox to use for the FW command
+ * @pf: the PF owning the queues
+ * @vf: the VF owning the queues
+ * @iqtype: the ingress queue type (FW_IQ_TYPE_FL_INT_CAP, etc.)
+ * @iqid: ingress queue id
+ * @fl0id: FL0 queue id or 0xffff if no attached FL0
+ * @fl1id: FL1 queue id or 0xffff if no attached FL1
+ *
+ * Frees an ingress queue and its associated FLs, if any.
+ */
+int t4_iq_free(struct adapter *adap, unsigned int mbox, unsigned int pf,
+ unsigned int vf, unsigned int iqtype, unsigned int iqid,
+ unsigned int fl0id, unsigned int fl1id)
+{
+ struct fw_iq_cmd c;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_IQ_CMD) | F_FW_CMD_REQUEST |
+ F_FW_CMD_EXEC | V_FW_IQ_CMD_PFN(pf) |
+ V_FW_IQ_CMD_VFN(vf));
+ c.alloc_to_len16 = cpu_to_be32(F_FW_IQ_CMD_FREE | FW_LEN16(c));
+ c.type_to_iqandstindex = cpu_to_be32(V_FW_IQ_CMD_TYPE(iqtype));
+ c.iqid = cpu_to_be16(iqid);
+ c.fl0id = cpu_to_be16(fl0id);
+ c.fl1id = cpu_to_be16(fl1id);
+ return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
+}
+
+/**
+ * t4_eth_eq_free - free an Ethernet egress queue
+ * @adap: the adapter
+ * @mbox: mailbox to use for the FW command
+ * @pf: the PF owning the queue
+ * @vf: the VF owning the queue
+ * @eqid: egress queue id
+ *
+ * Frees an Ethernet egress queue.
+ */
+int t4_eth_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf,
+ unsigned int vf, unsigned int eqid)
+{
+ struct fw_eq_eth_cmd c;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_EQ_ETH_CMD) |
+ F_FW_CMD_REQUEST | F_FW_CMD_EXEC |
+ V_FW_EQ_ETH_CMD_PFN(pf) |
+ V_FW_EQ_ETH_CMD_VFN(vf));
+ c.alloc_to_len16 = cpu_to_be32(F_FW_EQ_ETH_CMD_FREE | FW_LEN16(c));
+ c.eqid_pkd = cpu_to_be32(V_FW_EQ_ETH_CMD_EQID(eqid));
+ return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
+}
+
+/**
+ * t4_handle_fw_rpl - process a FW reply message
+ * @adap: the adapter
+ * @rpl: start of the FW message
+ *
+ * Processes a FW message, such as link state change messages.
+ */
+int t4_handle_fw_rpl(struct adapter *adap, const __be64 *rpl)
+{
+ u8 opcode = *(const u8 *)rpl;
+
+ /*
+ * This might be a port command ... this simplifies the following
+ * conditionals ... We can get away with pre-dereferencing
+ * action_to_len16 because it's in the first 16 bytes and all messages
+ * will be at least that long.
+ */
+ const struct fw_port_cmd *p = (const void *)rpl;
+ unsigned int action =
+ G_FW_PORT_CMD_ACTION(be32_to_cpu(p->action_to_len16));
+
+ if (opcode == FW_PORT_CMD && action == FW_PORT_ACTION_GET_PORT_INFO) {
+ /* link/module state change message */
+ int speed = 0, fc = 0, i;
+ int chan = G_FW_PORT_CMD_PORTID(be32_to_cpu(p->op_to_portid));
+ struct port_info *pi = NULL;
+ struct link_config *lc;
+ u32 stat = be32_to_cpu(p->u.info.lstatus_to_modtype);
+ int link_ok = (stat & F_FW_PORT_CMD_LSTATUS) != 0;
+ u32 mod = G_FW_PORT_CMD_MODTYPE(stat);
+
+ if (stat & F_FW_PORT_CMD_RXPAUSE)
+ fc |= PAUSE_RX;
+ if (stat & F_FW_PORT_CMD_TXPAUSE)
+ fc |= PAUSE_TX;
+ if (stat & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_100M))
+ speed = ETH_SPEED_NUM_100M;
+ else if (stat & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_1G))
+ speed = ETH_SPEED_NUM_1G;
+ else if (stat & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_10G))
+ speed = ETH_SPEED_NUM_10G;
+ else if (stat & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_40G))
+ speed = ETH_SPEED_NUM_40G;
+
+ for_each_port(adap, i) {
+ pi = adap2pinfo(adap, i);
+ if (pi->tx_chan == chan)
+ break;
+ }
+ lc = &pi->link_cfg;
+
+ if (mod != pi->mod_type) {
+ pi->mod_type = mod;
+ t4_os_portmod_changed(adap, i);
+ }
+ if (link_ok != lc->link_ok || speed != lc->speed ||
+ fc != lc->fc) { /* something changed */
+ if (!link_ok && lc->link_ok) {
+ static const char * const reason[] = {
+ "Link Down",
+ "Remote Fault",
+ "Auto-negotiation Failure",
+ "Reserved",
+ "Insufficient Airflow",
+ "Unable To Determine Reason",
+ "No RX Signal Detected",
+ "Reserved",
+ };
+ unsigned int rc = G_FW_PORT_CMD_LINKDNRC(stat);
+
+ dev_warn(adap, "Port %d link down, reason: %s\n",
+ chan, reason[rc]);
+ }
+ lc->link_ok = link_ok;
+ lc->speed = speed;
+ lc->fc = fc;
+ lc->supported = be16_to_cpu(p->u.info.pcap);
+ }
+ } else {
+ dev_warn(adap, "Unknown firmware reply %d\n", opcode);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+void t4_reset_link_config(struct adapter *adap, int idx)
+{
+ struct port_info *pi = adap2pinfo(adap, idx);
+ struct link_config *lc = &pi->link_cfg;
+
+ lc->link_ok = 0;
+ lc->requested_speed = 0;
+ lc->requested_fc = 0;
+ lc->speed = 0;
+ lc->fc = 0;
+}
+
+/**
+ * init_link_config - initialize a link's SW state
+ * @lc: structure holding the link state
+ * @caps: link capabilities
+ *
+ * Initializes the SW state maintained for each link, including the link's
+ * capabilities and default speed/flow-control/autonegotiation settings.
+ */
+static void init_link_config(struct link_config *lc,
+ unsigned int caps)
+{
+ lc->supported = caps;
+ lc->requested_speed = 0;
+ lc->speed = 0;
+ lc->requested_fc = 0;
+ lc->fc = 0;
+ if (lc->supported & FW_PORT_CAP_ANEG) {
+ lc->advertising = lc->supported & ADVERT_MASK;
+ lc->autoneg = AUTONEG_ENABLE;
+ } else {
+ lc->advertising = 0;
+ lc->autoneg = AUTONEG_DISABLE;
+ }
+}
+
+/**
+ * t4_wait_dev_ready - wait till to reads of registers work
+ *
+ * Right after the device is RESET is can take a small amount of time
+ * for it to respond to register reads. Until then, all reads will
+ * return either 0xff...ff or 0xee...ee. Return an error if reads
+ * don't work within a reasonable time frame.
+ */
+static int t4_wait_dev_ready(struct adapter *adapter)
+{
+ u32 whoami;
+
+ whoami = t4_read_reg(adapter, A_PL_WHOAMI);
+
+ if (whoami != 0xffffffff && whoami != X_CIM_PF_NOACCESS)
+ return 0;
+
+ msleep(500);
+ whoami = t4_read_reg(adapter, A_PL_WHOAMI);
+ return (whoami != 0xffffffff && whoami != X_CIM_PF_NOACCESS
+ ? 0 : -EIO);
+}
+
+struct flash_desc {
+ u32 vendor_and_model_id;
+ u32 size_mb;
+};
+
+int t4_get_flash_params(struct adapter *adapter)
+{
+ /*
+ * Table for non-Numonix supported flash parts. Numonix parts are left
+ * to the preexisting well-tested code. All flash parts have 64KB
+ * sectors.
+ */
+ static struct flash_desc supported_flash[] = {
+ { 0x150201, 4 << 20 }, /* Spansion 4MB S25FL032P */
+ };
+
+ int ret;
+ unsigned int i;
+ u32 info = 0;
+
+ ret = sf1_write(adapter, 1, 1, 0, SF_RD_ID);
+ if (!ret)
+ ret = sf1_read(adapter, 3, 0, 1, &info);
+ t4_write_reg(adapter, A_SF_OP, 0); /* unlock SF */
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < ARRAY_SIZE(supported_flash); ++i)
+ if (supported_flash[i].vendor_and_model_id == info) {
+ adapter->params.sf_size = supported_flash[i].size_mb;
+ adapter->params.sf_nsec =
+ adapter->params.sf_size / SF_SEC_SIZE;
+ return 0;
+ }
+
+ if ((info & 0xff) != 0x20) /* not a Numonix flash */
+ return -EINVAL;
+ info >>= 16; /* log2 of size */
+ if (info >= 0x14 && info < 0x18)
+ adapter->params.sf_nsec = 1 << (info - 16);
+ else if (info == 0x18)
+ adapter->params.sf_nsec = 64;
+ else
+ return -EINVAL;
+ adapter->params.sf_size = 1 << info;
+
+ /*
+ * We should reject adapters with FLASHes which are too small. So, emit
+ * a warning.
+ */
+ if (adapter->params.sf_size < FLASH_MIN_SIZE) {
+ dev_warn(adapter, "WARNING!!! FLASH size %#x < %#x!!!\n",
+ adapter->params.sf_size, FLASH_MIN_SIZE);
+ }
+
+ return 0;
+}
+
+/**
+ * t4_prep_adapter - prepare SW and HW for operation
+ * @adapter: the adapter
+ *
+ * Initialize adapter SW state for the various HW modules, set initial
+ * values for some adapter tunables, take PHYs out of reset, and
+ * initialize the MDIO interface.
+ */
+int t4_prep_adapter(struct adapter *adapter)
+{
+ int ret, ver;
+ u32 pl_rev;
+
+ ret = t4_wait_dev_ready(adapter);
+ if (ret < 0)
+ return ret;
+
+ pl_rev = G_REV(t4_read_reg(adapter, A_PL_REV));
+ adapter->params.pci.device_id = adapter->pdev->id.device_id;
+ adapter->params.pci.vendor_id = adapter->pdev->id.vendor_id;
+
+ /*
+ * WE DON'T NEED adapter->params.chip CODE ONCE PL_REV CONTAINS
+ * ADAPTER (VERSION << 4 | REVISION)
+ */
+ ver = CHELSIO_PCI_ID_VER(adapter->params.pci.device_id);
+ adapter->params.chip = 0;
+ switch (ver) {
+ case CHELSIO_T5:
+ adapter->params.chip |= CHELSIO_CHIP_CODE(CHELSIO_T5, pl_rev);
+ adapter->params.arch.sge_fl_db = F_DBPRIO | F_DBTYPE;
+ adapter->params.arch.mps_tcam_size =
+ NUM_MPS_T5_CLS_SRAM_L_INSTANCES;
+ adapter->params.arch.mps_rplc_size = 128;
+ adapter->params.arch.nchan = NCHAN;
+ adapter->params.arch.vfcount = 128;
+ break;
+ default:
+ dev_err(adapter, "%s: Device %d is not supported\n",
+ __func__, adapter->params.pci.device_id);
+ return -EINVAL;
+ }
+
+ ret = t4_get_flash_params(adapter);
+ if (ret < 0)
+ return ret;
+
+ adapter->params.cim_la_size = CIMLA_SIZE;
+
+ init_cong_ctrl(adapter->params.a_wnd, adapter->params.b_wnd);
+
+ /*
+ * Default port and clock for debugging in case we can't reach FW.
+ */
+ adapter->params.nports = 1;
+ adapter->params.portvec = 1;
+ adapter->params.vpd.cclk = 50000;
+
+ return 0;
+}
+
+/**
+ * t4_bar2_sge_qregs - return BAR2 SGE Queue register information
+ * @adapter: the adapter
+ * @qid: the Queue ID
+ * @qtype: the Ingress or Egress type for @qid
+ * @pbar2_qoffset: BAR2 Queue Offset
+ * @pbar2_qid: BAR2 Queue ID or 0 for Queue ID inferred SGE Queues
+ *
+ * Returns the BAR2 SGE Queue Registers information associated with the
+ * indicated Absolute Queue ID. These are passed back in return value
+ * pointers. @qtype should be T4_BAR2_QTYPE_EGRESS for Egress Queue
+ * and T4_BAR2_QTYPE_INGRESS for Ingress Queues.
+ *
+ * This may return an error which indicates that BAR2 SGE Queue
+ * registers aren't available. If an error is not returned, then the
+ * following values are returned:
+ *
+ * *@pbar2_qoffset: the BAR2 Offset of the @qid Registers
+ * *@pbar2_qid: the BAR2 SGE Queue ID or 0 of @qid
+ *
+ * If the returned BAR2 Queue ID is 0, then BAR2 SGE registers which
+ * require the "Inferred Queue ID" ability may be used. E.g. the
+ * Write Combining Doorbell Buffer. If the BAR2 Queue ID is not 0,
+ * then these "Inferred Queue ID" register may not be used.
+ */
+int t4_bar2_sge_qregs(struct adapter *adapter, unsigned int qid,
+ enum t4_bar2_qtype qtype, u64 *pbar2_qoffset,
+ unsigned int *pbar2_qid)
+{
+ unsigned int page_shift, page_size, qpp_shift, qpp_mask;
+ u64 bar2_page_offset, bar2_qoffset;
+ unsigned int bar2_qid, bar2_qid_offset, bar2_qinferred;
+
+ /*
+ * T4 doesn't support BAR2 SGE Queue registers.
+ */
+ if (is_t4(adapter->params.chip))
+ return -EINVAL;
+
+ /*
+ * Get our SGE Page Size parameters.
+ */
+ page_shift = adapter->params.sge.hps + 10;
+ page_size = 1 << page_shift;
+
+ /*
+ * Get the right Queues per Page parameters for our Queue.
+ */
+ qpp_shift = (qtype == T4_BAR2_QTYPE_EGRESS ?
+ adapter->params.sge.eq_qpp :
+ adapter->params.sge.iq_qpp);
+ qpp_mask = (1 << qpp_shift) - 1;
+
+ /*
+ * Calculate the basics of the BAR2 SGE Queue register area:
+ * o The BAR2 page the Queue registers will be in.
+ * o The BAR2 Queue ID.
+ * o The BAR2 Queue ID Offset into the BAR2 page.
+ */
+ bar2_page_offset = ((qid >> qpp_shift) << page_shift);
+ bar2_qid = qid & qpp_mask;
+ bar2_qid_offset = bar2_qid * SGE_UDB_SIZE;
+
+ /*
+ * If the BAR2 Queue ID Offset is less than the Page Size, then the
+ * hardware will infer the Absolute Queue ID simply from the writes to
+ * the BAR2 Queue ID Offset within the BAR2 Page (and we need to use a
+ * BAR2 Queue ID of 0 for those writes). Otherwise, we'll simply
+ * write to the first BAR2 SGE Queue Area within the BAR2 Page with
+ * the BAR2 Queue ID and the hardware will infer the Absolute Queue ID
+ * from the BAR2 Page and BAR2 Queue ID.
+ *
+ * One important censequence of this is that some BAR2 SGE registers
+ * have a "Queue ID" field and we can write the BAR2 SGE Queue ID
+ * there. But other registers synthesize the SGE Queue ID purely
+ * from the writes to the registers -- the Write Combined Doorbell
+ * Buffer is a good example. These BAR2 SGE Registers are only
+ * available for those BAR2 SGE Register areas where the SGE Absolute
+ * Queue ID can be inferred from simple writes.
+ */
+ bar2_qoffset = bar2_page_offset;
+ bar2_qinferred = (bar2_qid_offset < page_size);
+ if (bar2_qinferred) {
+ bar2_qoffset += bar2_qid_offset;
+ bar2_qid = 0;
+ }
+
+ *pbar2_qoffset = bar2_qoffset;
+ *pbar2_qid = bar2_qid;
+ return 0;
+}
+
+/**
+ * t4_init_sge_params - initialize adap->params.sge
+ * @adapter: the adapter
+ *
+ * Initialize various fields of the adapter's SGE Parameters structure.
+ */
+int t4_init_sge_params(struct adapter *adapter)
+{
+ struct sge_params *sge_params = &adapter->params.sge;
+ u32 hps, qpp;
+ unsigned int s_hps, s_qpp;
+
+ /*
+ * Extract the SGE Page Size for our PF.
+ */
+ hps = t4_read_reg(adapter, A_SGE_HOST_PAGE_SIZE);
+ s_hps = (S_HOSTPAGESIZEPF0 + (S_HOSTPAGESIZEPF1 - S_HOSTPAGESIZEPF0) *
+ adapter->pf);
+ sge_params->hps = ((hps >> s_hps) & M_HOSTPAGESIZEPF0);
+
+ /*
+ * Extract the SGE Egress and Ingess Queues Per Page for our PF.
+ */
+ s_qpp = (S_QUEUESPERPAGEPF0 +
+ (S_QUEUESPERPAGEPF1 - S_QUEUESPERPAGEPF0) * adapter->pf);
+ qpp = t4_read_reg(adapter, A_SGE_EGRESS_QUEUES_PER_PAGE_PF);
+ sge_params->eq_qpp = ((qpp >> s_qpp) & M_QUEUESPERPAGEPF0);
+ qpp = t4_read_reg(adapter, A_SGE_INGRESS_QUEUES_PER_PAGE_PF);
+ sge_params->iq_qpp = ((qpp >> s_qpp) & M_QUEUESPERPAGEPF0);
+
+ return 0;
+}
+
+/**
+ * t4_init_tp_params - initialize adap->params.tp
+ * @adap: the adapter
+ *
+ * Initialize various fields of the adapter's TP Parameters structure.
+ */
+int t4_init_tp_params(struct adapter *adap)
+{
+ int chan;
+ u32 v;
+
+ v = t4_read_reg(adap, A_TP_TIMER_RESOLUTION);
+ adap->params.tp.tre = G_TIMERRESOLUTION(v);
+ adap->params.tp.dack_re = G_DELAYEDACKRESOLUTION(v);
+
+ /* MODQ_REQ_MAP defaults to setting queues 0-3 to chan 0-3 */
+ for (chan = 0; chan < NCHAN; chan++)
+ adap->params.tp.tx_modq[chan] = chan;
+
+ /*
+ * Cache the adapter's Compressed Filter Mode and global Incress
+ * Configuration.
+ */
+ t4_read_indirect(adap, A_TP_PIO_ADDR, A_TP_PIO_DATA,
+ &adap->params.tp.vlan_pri_map, 1, A_TP_VLAN_PRI_MAP);
+ t4_read_indirect(adap, A_TP_PIO_ADDR, A_TP_PIO_DATA,
+ &adap->params.tp.ingress_config, 1,
+ A_TP_INGRESS_CONFIG);
+
+ /*
+ * Now that we have TP_VLAN_PRI_MAP cached, we can calculate the field
+ * shift positions of several elements of the Compressed Filter Tuple
+ * for this adapter which we need frequently ...
+ */
+ adap->params.tp.vlan_shift = t4_filter_field_shift(adap, F_VLAN);
+ adap->params.tp.vnic_shift = t4_filter_field_shift(adap, F_VNIC_ID);
+ adap->params.tp.port_shift = t4_filter_field_shift(adap, F_PORT);
+ adap->params.tp.protocol_shift = t4_filter_field_shift(adap,
+ F_PROTOCOL);
+
+ /*
+ * If TP_INGRESS_CONFIG.VNID == 0, then TP_VLAN_PRI_MAP.VNIC_ID
+ * represents the presense of an Outer VLAN instead of a VNIC ID.
+ */
+ if ((adap->params.tp.ingress_config & F_VNIC) == 0)
+ adap->params.tp.vnic_shift = -1;
+
+ return 0;
+}
+
+/**
+ * t4_filter_field_shift - calculate filter field shift
+ * @adap: the adapter
+ * @filter_sel: the desired field (from TP_VLAN_PRI_MAP bits)
+ *
+ * Return the shift position of a filter field within the Compressed
+ * Filter Tuple. The filter field is specified via its selection bit
+ * within TP_VLAN_PRI_MAL (filter mode). E.g. F_VLAN.
+ */
+int t4_filter_field_shift(const struct adapter *adap, unsigned int filter_sel)
+{
+ unsigned int filter_mode = adap->params.tp.vlan_pri_map;
+ unsigned int sel;
+ int field_shift;
+
+ if ((filter_mode & filter_sel) == 0)
+ return -1;
+
+ for (sel = 1, field_shift = 0; sel < filter_sel; sel <<= 1) {
+ switch (filter_mode & sel) {
+ case F_FCOE:
+ field_shift += W_FT_FCOE;
+ break;
+ case F_PORT:
+ field_shift += W_FT_PORT;
+ break;
+ case F_VNIC_ID:
+ field_shift += W_FT_VNIC_ID;
+ break;
+ case F_VLAN:
+ field_shift += W_FT_VLAN;
+ break;
+ case F_TOS:
+ field_shift += W_FT_TOS;
+ break;
+ case F_PROTOCOL:
+ field_shift += W_FT_PROTOCOL;
+ break;
+ case F_ETHERTYPE:
+ field_shift += W_FT_ETHERTYPE;
+ break;
+ case F_MACMATCH:
+ field_shift += W_FT_MACMATCH;
+ break;
+ case F_MPSHITTYPE:
+ field_shift += W_FT_MPSHITTYPE;
+ break;
+ case F_FRAGMENTATION:
+ field_shift += W_FT_FRAGMENTATION;
+ break;
+ }
+ }
+ return field_shift;
+}
+
+int t4_init_rss_mode(struct adapter *adap, int mbox)
+{
+ int i, ret;
+ struct fw_rss_vi_config_cmd rvc;
+
+ memset(&rvc, 0, sizeof(rvc));
+
+ for_each_port(adap, i) {
+ struct port_info *p = adap2pinfo(adap, i);
+
+ rvc.op_to_viid = htonl(V_FW_CMD_OP(FW_RSS_VI_CONFIG_CMD) |
+ F_FW_CMD_REQUEST | F_FW_CMD_READ |
+ V_FW_RSS_VI_CONFIG_CMD_VIID(p->viid));
+ rvc.retval_len16 = htonl(FW_LEN16(rvc));
+ ret = t4_wr_mbox(adap, mbox, &rvc, sizeof(rvc), &rvc);
+ if (ret)
+ return ret;
+ p->rss_mode = ntohl(rvc.u.basicvirtual.defaultq_to_udpen);
+ }
+ return 0;
+}
+
+int t4_port_init(struct adapter *adap, int mbox, int pf, int vf)
+{
+ u8 addr[6];
+ int ret, i, j = 0;
+ struct fw_port_cmd c;
+
+ memset(&c, 0, sizeof(c));
+
+ for_each_port(adap, i) {
+ unsigned int rss_size = 0;
+ struct port_info *p = adap2pinfo(adap, i);
+
+ while ((adap->params.portvec & (1 << j)) == 0)
+ j++;
+
+ c.op_to_portid = cpu_to_be32(V_FW_CMD_OP(FW_PORT_CMD) |
+ F_FW_CMD_REQUEST | F_FW_CMD_READ |
+ V_FW_PORT_CMD_PORTID(j));
+ c.action_to_len16 = cpu_to_be32(V_FW_PORT_CMD_ACTION(
+ FW_PORT_ACTION_GET_PORT_INFO) |
+ FW_LEN16(c));
+ ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
+ if (ret)
+ return ret;
+
+ ret = t4_alloc_vi(adap, mbox, j, pf, vf, 1, addr, &rss_size);
+ if (ret < 0)
+ return ret;
+
+ p->viid = ret;
+ p->tx_chan = j;
+ p->rss_size = rss_size;
+ t4_os_set_hw_addr(adap, i, addr);
+
+ ret = be32_to_cpu(c.u.info.lstatus_to_modtype);
+ p->mdio_addr = (ret & F_FW_PORT_CMD_MDIOCAP) ?
+ G_FW_PORT_CMD_MDIOADDR(ret) : -1;
+ p->port_type = G_FW_PORT_CMD_PTYPE(ret);
+ p->mod_type = FW_PORT_MOD_TYPE_NA;
+
+ init_link_config(&p->link_cfg, be16_to_cpu(c.u.info.pcap));
+ j++;
+ }
+ return 0;
+}