summaryrefslogtreecommitdiffstats
path: root/drivers/net/dpaa2/dpaa2_ethdev.c
diff options
context:
space:
mode:
authorLuca Boccassi <luca.boccassi@gmail.com>2018-02-19 11:16:57 +0000
committerLuca Boccassi <luca.boccassi@gmail.com>2018-02-19 11:17:28 +0000
commitca33590b6af032bff57d9cc70455660466a654b2 (patch)
tree0b68b090bd9b4a78a3614b62400b29279d76d553 /drivers/net/dpaa2/dpaa2_ethdev.c
parent169a9de21e263aa6599cdc2d87a45ae158d9f509 (diff)
New upstream version 18.02upstream/18.02
Change-Id: I89ed24cb2a49b78fe5be6970b99dd46c1499fcc3 Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
Diffstat (limited to 'drivers/net/dpaa2/dpaa2_ethdev.c')
-rw-r--r--drivers/net/dpaa2/dpaa2_ethdev.c144
1 files changed, 90 insertions, 54 deletions
diff --git a/drivers/net/dpaa2/dpaa2_ethdev.c b/drivers/net/dpaa2/dpaa2_ethdev.c
index 202f84f0..09a11d65 100644
--- a/drivers/net/dpaa2/dpaa2_ethdev.c
+++ b/drivers/net/dpaa2/dpaa2_ethdev.c
@@ -1,41 +1,15 @@
-/*-
- * BSD LICENSE
+/* * SPDX-License-Identifier: BSD-3-Clause
*
* Copyright (c) 2016 Freescale Semiconductor, Inc. All rights reserved.
- * Copyright 2016 NXP.
+ * Copyright 2016 NXP
*
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Freescale Semiconductor, Inc nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <time.h>
#include <net/if.h>
#include <rte_mbuf.h>
-#include <rte_ethdev.h>
+#include <rte_ethdev_driver.h>
#include <rte_malloc.h>
#include <rte_memcpy.h>
#include <rte_string_fns.h>
@@ -51,6 +25,7 @@
#include <dpaa2_hw_dpio.h>
#include <mc/fsl_dpmng.h>
#include "dpaa2_ethdev.h"
+#include <fsl_qbman_debug.h>
struct rte_dpaa2_xstats_name_off {
char name[RTE_ETH_XSTATS_NAME_SIZE];
@@ -172,6 +147,12 @@ dpaa2_vlan_offload_set(struct rte_eth_dev *dev, int mask)
PMD_INIT_FUNC_TRACE();
if (mask & ETH_VLAN_FILTER_MASK) {
+ /* VLAN Filter not avaialble */
+ if (!priv->max_vlan_filters) {
+ RTE_LOG(INFO, PMD, "VLAN filter not available\n");
+ goto next_mask;
+ }
+
if (dev->data->dev_conf.rxmode.hw_vlan_filter)
ret = dpni_enable_vlan_filter(dpni, CMD_PRI_LOW,
priv->token, true);
@@ -182,7 +163,7 @@ dpaa2_vlan_offload_set(struct rte_eth_dev *dev, int mask)
RTE_LOG(ERR, PMD, "Unable to set vlan filter = %d\n",
ret);
}
-
+next_mask:
if (mask & ETH_VLAN_EXTEND_MASK) {
if (dev->data->dev_conf.rxmode.hw_vlan_extend)
RTE_LOG(INFO, PMD,
@@ -346,8 +327,8 @@ dpaa2_eth_dev_configure(struct rte_eth_dev *dev)
if (eth_conf->rxmode.jumbo_frame == 1) {
if (eth_conf->rxmode.max_rx_pkt_len <= DPAA2_MAX_RX_PKT_LEN) {
- ret = dpaa2_dev_mtu_set(dev,
- eth_conf->rxmode.max_rx_pkt_len);
+ ret = dpni_set_max_frame_length(dpni, CMD_PRI_LOW,
+ priv->token, eth_conf->rxmode.max_rx_pkt_len);
if (ret) {
PMD_INIT_LOG(ERR,
"unable to set mtu. check config\n");
@@ -399,6 +380,25 @@ dpaa2_eth_dev_configure(struct rte_eth_dev *dev)
return ret;
}
+ /* Enabling hash results in FD requires setting DPNI_FLCTYPE_HASH in
+ * dpni_set_offload API. Setting this FLCTYPE for DPNI sets the FD[SC]
+ * to 0 for LS2 in the hardware thus disabling data/annotation
+ * stashing. For LX2 this is fixed in hardware and thus hash result and
+ * parse results can be received in FD using this option.
+ */
+ if (dpaa2_svr_family == SVR_LX2160A) {
+ ret = dpni_set_offload(dpni, CMD_PRI_LOW, priv->token,
+ DPNI_FLCTYPE_HASH, true);
+ if (ret) {
+ PMD_INIT_LOG(ERR, "Error setting FLCTYPE: Err = %d\n",
+ ret);
+ return ret;
+ }
+ }
+
+ if (eth_conf->rxmode.hw_vlan_filter)
+ dpaa2_vlan_offload_set(dev, ETH_VLAN_FILTER_MASK);
+
/* update the current status */
dpaa2_dev_link_update(dev, 0);
@@ -418,7 +418,6 @@ dpaa2_dev_rx_queue_setup(struct rte_eth_dev *dev,
{
struct dpaa2_dev_priv *priv = dev->data->dev_private;
struct fsl_mc_io *dpni = (struct fsl_mc_io *)priv->hw;
- struct mc_soc_version mc_plat_info = {0};
struct dpaa2_queue *dpaa2_q;
struct dpni_queue cfg;
uint8_t options = 0;
@@ -450,18 +449,20 @@ dpaa2_dev_rx_queue_setup(struct rte_eth_dev *dev,
/*if ls2088 or rev2 device, enable the stashing */
- if (mc_get_soc_version(dpni, CMD_PRI_LOW, &mc_plat_info))
- PMD_INIT_LOG(ERR, "\tmc_get_soc_version failed\n");
-
- if ((mc_plat_info.svr & 0xffff0000) != SVR_LS2080A) {
+ if ((dpaa2_svr_family & 0xffff0000) != SVR_LS2080A) {
options |= DPNI_QUEUE_OPT_FLC;
cfg.flc.stash_control = true;
cfg.flc.value &= 0xFFFFFFFFFFFFFFC0;
/* 00 00 00 - last 6 bit represent annotation, context stashing,
- * data stashing setting 01 01 00 (0x14) to enable
- * 1 line data, 1 line annotation
+ * data stashing setting 01 01 00 (0x14)
+ * (in following order ->DS AS CS)
+ * to enable 1 line data, 1 line annotation.
+ * For LX2, this setting should be 01 00 00 (0x10)
*/
- cfg.flc.value |= 0x14;
+ if ((dpaa2_svr_family & 0xffff0000) == SVR_LX2160A)
+ cfg.flc.value |= 0x10;
+ else
+ cfg.flc.value |= 0x14;
}
ret = dpni_set_queue(dpni, CMD_PRI_LOW, priv->token, DPNI_QUEUE_RX,
dpaa2_q->tc_index, flow_id, options, &cfg);
@@ -594,6 +595,37 @@ dpaa2_dev_tx_queue_release(void *q __rte_unused)
PMD_INIT_FUNC_TRACE();
}
+static uint32_t
+dpaa2_dev_rx_queue_count(struct rte_eth_dev *dev, uint16_t rx_queue_id)
+{
+ int32_t ret;
+ struct dpaa2_dev_priv *priv = dev->data->dev_private;
+ struct dpaa2_queue *dpaa2_q;
+ struct qbman_swp *swp;
+ struct qbman_fq_query_np_rslt state;
+ uint32_t frame_cnt = 0;
+
+ PMD_INIT_FUNC_TRACE();
+
+ if (unlikely(!DPAA2_PER_LCORE_DPIO)) {
+ ret = dpaa2_affine_qbman_swp();
+ if (ret) {
+ RTE_LOG(ERR, PMD, "Failure in affining portal\n");
+ return -EINVAL;
+ }
+ }
+ swp = DPAA2_PER_LCORE_PORTAL;
+
+ dpaa2_q = (struct dpaa2_queue *)priv->rx_vq[rx_queue_id];
+
+ if (qbman_fq_query_state(swp, dpaa2_q->fqid, &state) == 0) {
+ frame_cnt = qbman_fq_state_frame_count(&state);
+ RTE_LOG(DEBUG, PMD, "RX frame count for q(%d) is %u\n",
+ rx_queue_id, frame_cnt);
+ }
+ return frame_cnt;
+}
+
static const uint32_t *
dpaa2_supported_ptypes_get(struct rte_eth_dev *dev)
{
@@ -655,7 +687,7 @@ dpaa2_interrupt_handler(void *param)
dpaa2_dev_link_update(dev, 0);
/* calling all the apps registered for link status event */
_rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC,
- NULL, NULL);
+ NULL);
}
out:
ret = dpni_clear_irq_status(dpni, CMD_PRI_LOW, priv->token,
@@ -757,16 +789,6 @@ dpaa2_dev_start(struct rte_eth_dev *dev)
"code = %d\n", ret);
return ret;
}
- /* VLAN Offload Settings */
- if (priv->max_vlan_filters) {
- ret = dpaa2_vlan_offload_set(dev, ETH_VLAN_FILTER_MASK);
- if (ret) {
- PMD_INIT_LOG(ERR, "Error to dpaa2_vlan_offload_set:"
- "code = %d\n", ret);
- return ret;
- }
- }
-
/* if the interrupts were configured on this devices*/
if (intr_handle && (intr_handle->fd) &&
@@ -967,7 +989,8 @@ dpaa2_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
int ret;
struct dpaa2_dev_priv *priv = dev->data->dev_private;
struct fsl_mc_io *dpni = (struct fsl_mc_io *)priv->hw;
- uint32_t frame_size = mtu + ETHER_HDR_LEN + ETHER_CRC_LEN;
+ uint32_t frame_size = mtu + ETHER_HDR_LEN + ETHER_CRC_LEN
+ + VLAN_TAG_SIZE;
PMD_INIT_FUNC_TRACE();
@@ -985,11 +1008,13 @@ dpaa2_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
else
dev->data->dev_conf.rxmode.jumbo_frame = 0;
+ dev->data->dev_conf.rxmode.max_rx_pkt_len = frame_size;
+
/* Set the Max Rx frame length as 'mtu' +
* Maximum Ethernet header length
*/
ret = dpni_set_max_frame_length(dpni, CMD_PRI_LOW, priv->token,
- mtu + ETH_VLAN_HLEN);
+ frame_size);
if (ret) {
PMD_DRV_LOG(ERR, "setting the max frame length failed");
return -1;
@@ -1660,6 +1685,8 @@ int dpaa2_eth_eventq_attach(const struct rte_eth_dev *dev,
if (queue_conf->ev.sched_type == RTE_SCHED_TYPE_PARALLEL)
dpaa2_ethq->cb = dpaa2_dev_process_parallel_event;
+ else if (queue_conf->ev.sched_type == RTE_SCHED_TYPE_ATOMIC)
+ dpaa2_ethq->cb = dpaa2_dev_process_atomic_event;
else
return -EINVAL;
@@ -1669,6 +1696,11 @@ int dpaa2_eth_eventq_attach(const struct rte_eth_dev *dev,
cfg.destination.id = dpcon_id;
cfg.destination.priority = queue_conf->ev.priority;
+ if (queue_conf->ev.sched_type == RTE_SCHED_TYPE_ATOMIC) {
+ options |= DPNI_QUEUE_OPT_HOLD_ACTIVE;
+ cfg.destination.hold_active = 1;
+ }
+
options |= DPNI_QUEUE_OPT_USER_CTX;
cfg.user_context = (uint64_t)(dpaa2_ethq);
@@ -1736,6 +1768,7 @@ static struct eth_dev_ops dpaa2_ethdev_ops = {
.rx_queue_release = dpaa2_dev_rx_queue_release,
.tx_queue_setup = dpaa2_dev_tx_queue_setup,
.tx_queue_release = dpaa2_dev_tx_queue_release,
+ .rx_queue_count = dpaa2_dev_rx_queue_count,
.flow_ctrl_get = dpaa2_flow_ctrl_get,
.flow_ctrl_set = dpaa2_flow_ctrl_set,
.mac_addr_add = dpaa2_dev_add_mac_addr,
@@ -1872,7 +1905,6 @@ dpaa2_dev_init(struct rte_eth_dev *eth_dev)
}
eth_dev->dev_ops = &dpaa2_ethdev_ops;
- eth_dev->data->dev_flags |= RTE_ETH_DEV_INTR_LSC;
eth_dev->rx_pkt_burst = dpaa2_dev_prefetch_rx;
eth_dev->tx_pkt_burst = dpaa2_dev_tx;
@@ -1976,6 +2008,9 @@ rte_dpaa2_probe(struct rte_dpaa2_driver *dpaa2_drv,
dpaa2_dev->eth_dev = eth_dev;
eth_dev->data->rx_mbuf_alloc_failed = 0;
+ if (dpaa2_drv->drv_flags & RTE_DPAA2_DRV_INTR_LSC)
+ eth_dev->data->dev_flags |= RTE_ETH_DEV_INTR_LSC;
+
/* Invoke PMD device initialization function */
diag = dpaa2_dev_init(eth_dev);
if (diag == 0)
@@ -2003,6 +2038,7 @@ rte_dpaa2_remove(struct rte_dpaa2_device *dpaa2_dev)
}
static struct rte_dpaa2_driver rte_dpaa2_pmd = {
+ .drv_flags = RTE_DPAA2_DRV_INTR_LSC | RTE_DPAA2_DRV_IOVA_AS_VA,
.drv_type = DPAA2_ETH,
.probe = rte_dpaa2_probe,
.remove = rte_dpaa2_remove,