Imported Upstream version 16.04

Change-Id: I77eadcd8538a9122e4773cbe55b24033dc451757
Signed-off-by: C.J. Collier <cjcollier@linuxfoundation.org>

1 files changed, 1384 insertions, 0 deletions

diff --git a/drivers/net/e1000/base/e1000_nvm.c b/drivers/net/e1000/base/e1000_nvm.c
new file mode 100644
index 00000000..762acd16
--- /dev/null
+++ b/drivers/net/e1000/base/e1000_nvm.c
@@ -0,0 +1,1384 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+    this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in the
+    documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+    contributors may be used to endorse or promote products derived from
+    this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#include "e1000_api.h"
+
+STATIC void e1000_reload_nvm_generic(struct e1000_hw *hw);
+
+/**
+ *  e1000_init_nvm_ops_generic - Initialize NVM function pointers
+ *  @hw: pointer to the HW structure
+ *
+ *  Setups up the function pointers to no-op functions
+ **/
+void e1000_init_nvm_ops_generic(struct e1000_hw *hw)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	DEBUGFUNC("e1000_init_nvm_ops_generic");
+
+	/* Initialize function pointers */
+	nvm->ops.init_params = e1000_null_ops_generic;
+	nvm->ops.acquire = e1000_null_ops_generic;
+	nvm->ops.read = e1000_null_read_nvm;
+	nvm->ops.release = e1000_null_nvm_generic;
+	nvm->ops.reload = e1000_reload_nvm_generic;
+	nvm->ops.update = e1000_null_ops_generic;
+	nvm->ops.valid_led_default = e1000_null_led_default;
+	nvm->ops.validate = e1000_null_ops_generic;
+	nvm->ops.write = e1000_null_write_nvm;
+}
+
+/**
+ *  e1000_null_nvm_read - No-op function, return 0
+ *  @hw: pointer to the HW structure
+ **/
+s32 e1000_null_read_nvm(struct e1000_hw E1000_UNUSEDARG *hw,
+			u16 E1000_UNUSEDARG a, u16 E1000_UNUSEDARG b,
+			u16 E1000_UNUSEDARG *c)
+{
+	DEBUGFUNC("e1000_null_read_nvm");
+	UNREFERENCED_4PARAMETER(hw, a, b, c);
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_null_nvm_generic - No-op function, return void
+ *  @hw: pointer to the HW structure
+ **/
+void e1000_null_nvm_generic(struct e1000_hw E1000_UNUSEDARG *hw)
+{
+	DEBUGFUNC("e1000_null_nvm_generic");
+	UNREFERENCED_1PARAMETER(hw);
+	return;
+}
+
+/**
+ *  e1000_null_led_default - No-op function, return 0
+ *  @hw: pointer to the HW structure
+ **/
+s32 e1000_null_led_default(struct e1000_hw E1000_UNUSEDARG *hw,
+			   u16 E1000_UNUSEDARG *data)
+{
+	DEBUGFUNC("e1000_null_led_default");
+	UNREFERENCED_2PARAMETER(hw, data);
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_null_write_nvm - No-op function, return 0
+ *  @hw: pointer to the HW structure
+ **/
+s32 e1000_null_write_nvm(struct e1000_hw E1000_UNUSEDARG *hw,
+			 u16 E1000_UNUSEDARG a, u16 E1000_UNUSEDARG b,
+			 u16 E1000_UNUSEDARG *c)
+{
+	DEBUGFUNC("e1000_null_write_nvm");
+	UNREFERENCED_4PARAMETER(hw, a, b, c);
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_raise_eec_clk - Raise EEPROM clock
+ *  @hw: pointer to the HW structure
+ *  @eecd: pointer to the EEPROM
+ *
+ *  Enable/Raise the EEPROM clock bit.
+ **/
+STATIC void e1000_raise_eec_clk(struct e1000_hw *hw, u32 *eecd)
+{
+	*eecd = *eecd | E1000_EECD_SK;
+	E1000_WRITE_REG(hw, E1000_EECD, *eecd);
+	E1000_WRITE_FLUSH(hw);
+	usec_delay(hw->nvm.delay_usec);
+}
+
+/**
+ *  e1000_lower_eec_clk - Lower EEPROM clock
+ *  @hw: pointer to the HW structure
+ *  @eecd: pointer to the EEPROM
+ *
+ *  Clear/Lower the EEPROM clock bit.
+ **/
+STATIC void e1000_lower_eec_clk(struct e1000_hw *hw, u32 *eecd)
+{
+	*eecd = *eecd & ~E1000_EECD_SK;
+	E1000_WRITE_REG(hw, E1000_EECD, *eecd);
+	E1000_WRITE_FLUSH(hw);
+	usec_delay(hw->nvm.delay_usec);
+}
+
+/**
+ *  e1000_shift_out_eec_bits - Shift data bits our to the EEPROM
+ *  @hw: pointer to the HW structure
+ *  @data: data to send to the EEPROM
+ *  @count: number of bits to shift out
+ *
+ *  We need to shift 'count' bits out to the EEPROM.  So, the value in the
+ *  "data" parameter will be shifted out to the EEPROM one bit at a time.
+ *  In order to do this, "data" must be broken down into bits.
+ **/
+STATIC void e1000_shift_out_eec_bits(struct e1000_hw *hw, u16 data, u16 count)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	u32 eecd = E1000_READ_REG(hw, E1000_EECD);
+	u32 mask;
+
+	DEBUGFUNC("e1000_shift_out_eec_bits");
+
+	mask = 0x01 << (count - 1);
+	if (nvm->type == e1000_nvm_eeprom_microwire)
+		eecd &= ~E1000_EECD_DO;
+	else
+	if (nvm->type == e1000_nvm_eeprom_spi)
+		eecd |= E1000_EECD_DO;
+
+	do {
+		eecd &= ~E1000_EECD_DI;
+
+		if (data & mask)
+			eecd |= E1000_EECD_DI;
+
+		E1000_WRITE_REG(hw, E1000_EECD, eecd);
+		E1000_WRITE_FLUSH(hw);
+
+		usec_delay(nvm->delay_usec);
+
+		e1000_raise_eec_clk(hw, &eecd);
+		e1000_lower_eec_clk(hw, &eecd);
+
+		mask >>= 1;
+	} while (mask);
+
+	eecd &= ~E1000_EECD_DI;
+	E1000_WRITE_REG(hw, E1000_EECD, eecd);
+}
+
+/**
+ *  e1000_shift_in_eec_bits - Shift data bits in from the EEPROM
+ *  @hw: pointer to the HW structure
+ *  @count: number of bits to shift in
+ *
+ *  In order to read a register from the EEPROM, we need to shift 'count' bits
+ *  in from the EEPROM.  Bits are "shifted in" by raising the clock input to
+ *  the EEPROM (setting the SK bit), and then reading the value of the data out
+ *  "DO" bit.  During this "shifting in" process the data in "DI" bit should
+ *  always be clear.
+ **/
+STATIC u16 e1000_shift_in_eec_bits(struct e1000_hw *hw, u16 count)
+{
+	u32 eecd;
+	u32 i;
+	u16 data;
+
+	DEBUGFUNC("e1000_shift_in_eec_bits");
+
+	eecd = E1000_READ_REG(hw, E1000_EECD);
+
+	eecd &= ~(E1000_EECD_DO | E1000_EECD_DI);
+	data = 0;
+
+	for (i = 0; i < count; i++) {
+		data <<= 1;
+		e1000_raise_eec_clk(hw, &eecd);
+
+		eecd = E1000_READ_REG(hw, E1000_EECD);
+
+		eecd &= ~E1000_EECD_DI;
+		if (eecd & E1000_EECD_DO)
+			data |= 1;
+
+		e1000_lower_eec_clk(hw, &eecd);
+	}
+
+	return data;
+}
+
+/**
+ *  e1000_poll_eerd_eewr_done - Poll for EEPROM read/write completion
+ *  @hw: pointer to the HW structure
+ *  @ee_reg: EEPROM flag for polling
+ *
+ *  Polls the EEPROM status bit for either read or write completion based
+ *  upon the value of 'ee_reg'.
+ **/
+s32 e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg)
+{
+	u32 attempts = 100000;
+	u32 i, reg = 0;
+
+	DEBUGFUNC("e1000_poll_eerd_eewr_done");
+
+	for (i = 0; i < attempts; i++) {
+		if (ee_reg == E1000_NVM_POLL_READ)
+			reg = E1000_READ_REG(hw, E1000_EERD);
+		else
+			reg = E1000_READ_REG(hw, E1000_EEWR);
+
+		if (reg & E1000_NVM_RW_REG_DONE)
+			return E1000_SUCCESS;
+
+		usec_delay(5);
+	}
+
+	return -E1000_ERR_NVM;
+}
+
+/**
+ *  e1000_acquire_nvm_generic - Generic request for access to EEPROM
+ *  @hw: pointer to the HW structure
+ *
+ *  Set the EEPROM access request bit and wait for EEPROM access grant bit.
+ *  Return successful if access grant bit set, else clear the request for
+ *  EEPROM access and return -E1000_ERR_NVM (-1).
+ **/
+s32 e1000_acquire_nvm_generic(struct e1000_hw *hw)
+{
+	u32 eecd = E1000_READ_REG(hw, E1000_EECD);
+	s32 timeout = E1000_NVM_GRANT_ATTEMPTS;
+
+	DEBUGFUNC("e1000_acquire_nvm_generic");
+
+	E1000_WRITE_REG(hw, E1000_EECD, eecd | E1000_EECD_REQ);
+	eecd = E1000_READ_REG(hw, E1000_EECD);
+
+	while (timeout) {
+		if (eecd & E1000_EECD_GNT)
+			break;
+		usec_delay(5);
+		eecd = E1000_READ_REG(hw, E1000_EECD);
+		timeout--;
+	}
+
+	if (!timeout) {
+		eecd &= ~E1000_EECD_REQ;
+		E1000_WRITE_REG(hw, E1000_EECD, eecd);
+		DEBUGOUT("Could not acquire NVM grant\n");
+		return -E1000_ERR_NVM;
+	}
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_standby_nvm - Return EEPROM to standby state
+ *  @hw: pointer to the HW structure
+ *
+ *  Return the EEPROM to a standby state.
+ **/
+STATIC void e1000_standby_nvm(struct e1000_hw *hw)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	u32 eecd = E1000_READ_REG(hw, E1000_EECD);
+
+	DEBUGFUNC("e1000_standby_nvm");
+
+	if (nvm->type == e1000_nvm_eeprom_microwire) {
+		eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
+		E1000_WRITE_REG(hw, E1000_EECD, eecd);
+		E1000_WRITE_FLUSH(hw);
+		usec_delay(nvm->delay_usec);
+
+		e1000_raise_eec_clk(hw, &eecd);
+
+		/* Select EEPROM */
+		eecd |= E1000_EECD_CS;
+		E1000_WRITE_REG(hw, E1000_EECD, eecd);
+		E1000_WRITE_FLUSH(hw);
+		usec_delay(nvm->delay_usec);
+
+		e1000_lower_eec_clk(hw, &eecd);
+	} else if (nvm->type == e1000_nvm_eeprom_spi) {
+		/* Toggle CS to flush commands */
+		eecd |= E1000_EECD_CS;
+		E1000_WRITE_REG(hw, E1000_EECD, eecd);
+		E1000_WRITE_FLUSH(hw);
+		usec_delay(nvm->delay_usec);
+		eecd &= ~E1000_EECD_CS;
+		E1000_WRITE_REG(hw, E1000_EECD, eecd);
+		E1000_WRITE_FLUSH(hw);
+		usec_delay(nvm->delay_usec);
+	}
+}
+
+/**
+ *  e1000_stop_nvm - Terminate EEPROM command
+ *  @hw: pointer to the HW structure
+ *
+ *  Terminates the current command by inverting the EEPROM's chip select pin.
+ **/
+void e1000_stop_nvm(struct e1000_hw *hw)
+{
+	u32 eecd;
+
+	DEBUGFUNC("e1000_stop_nvm");
+
+	eecd = E1000_READ_REG(hw, E1000_EECD);
+	if (hw->nvm.type == e1000_nvm_eeprom_spi) {
+		/* Pull CS high */
+		eecd |= E1000_EECD_CS;
+		e1000_lower_eec_clk(hw, &eecd);
+	} else if (hw->nvm.type == e1000_nvm_eeprom_microwire) {
+		/* CS on Microwire is active-high */
+		eecd &= ~(E1000_EECD_CS | E1000_EECD_DI);
+		E1000_WRITE_REG(hw, E1000_EECD, eecd);
+		e1000_raise_eec_clk(hw, &eecd);
+		e1000_lower_eec_clk(hw, &eecd);
+	}
+}
+
+/**
+ *  e1000_release_nvm_generic - Release exclusive access to EEPROM
+ *  @hw: pointer to the HW structure
+ *
+ *  Stop any current commands to the EEPROM and clear the EEPROM request bit.
+ **/
+void e1000_release_nvm_generic(struct e1000_hw *hw)
+{
+	u32 eecd;
+
+	DEBUGFUNC("e1000_release_nvm_generic");
+
+	e1000_stop_nvm(hw);
+
+	eecd = E1000_READ_REG(hw, E1000_EECD);
+	eecd &= ~E1000_EECD_REQ;
+	E1000_WRITE_REG(hw, E1000_EECD, eecd);
+}
+
+/**
+ *  e1000_ready_nvm_eeprom - Prepares EEPROM for read/write
+ *  @hw: pointer to the HW structure
+ *
+ *  Setups the EEPROM for reading and writing.
+ **/
+STATIC s32 e1000_ready_nvm_eeprom(struct e1000_hw *hw)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	u32 eecd = E1000_READ_REG(hw, E1000_EECD);
+	u8 spi_stat_reg;
+
+	DEBUGFUNC("e1000_ready_nvm_eeprom");
+
+	if (nvm->type == e1000_nvm_eeprom_microwire) {
+		/* Clear SK and DI */
+		eecd &= ~(E1000_EECD_DI | E1000_EECD_SK);
+		E1000_WRITE_REG(hw, E1000_EECD, eecd);
+		/* Set CS */
+		eecd |= E1000_EECD_CS;
+		E1000_WRITE_REG(hw, E1000_EECD, eecd);
+	} else if (nvm->type == e1000_nvm_eeprom_spi) {
+		u16 timeout = NVM_MAX_RETRY_SPI;
+
+		/* Clear SK and CS */
+		eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
+		E1000_WRITE_REG(hw, E1000_EECD, eecd);
+		E1000_WRITE_FLUSH(hw);
+		usec_delay(1);
+
+		/* Read "Status Register" repeatedly until the LSB is cleared.
+		 * The EEPROM will signal that the command has been completed
+		 * by clearing bit 0 of the internal status register.  If it's
+		 * not cleared within 'timeout', then error out.
+		 */
+		while (timeout) {
+			e1000_shift_out_eec_bits(hw, NVM_RDSR_OPCODE_SPI,
+						 hw->nvm.opcode_bits);
+			spi_stat_reg = (u8)e1000_shift_in_eec_bits(hw, 8);
+			if (!(spi_stat_reg & NVM_STATUS_RDY_SPI))
+				break;
+
+			usec_delay(5);
+			e1000_standby_nvm(hw);
+			timeout--;
+		}
+
+		if (!timeout) {
+			DEBUGOUT("SPI NVM Status error\n");
+			return -E1000_ERR_NVM;
+		}
+	}
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_read_nvm_spi - Read EEPROM's using SPI
+ *  @hw: pointer to the HW structure
+ *  @offset: offset of word in the EEPROM to read
+ *  @words: number of words to read
+ *  @data: word read from the EEPROM
+ *
+ *  Reads a 16 bit word from the EEPROM.
+ **/
+s32 e1000_read_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	u32 i = 0;
+	s32 ret_val;
+	u16 word_in;
+	u8 read_opcode = NVM_READ_OPCODE_SPI;
+
+	DEBUGFUNC("e1000_read_nvm_spi");
+
+	/* A check for invalid values:  offset too large, too many words,
+	 * and not enough words.
+	 */
+	if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
+	    (words == 0)) {
+		DEBUGOUT("nvm parameter(s) out of bounds\n");
+		return -E1000_ERR_NVM;
+	}
+
+	ret_val = nvm->ops.acquire(hw);
+	if (ret_val)
+		return ret_val;
+
+	ret_val = e1000_ready_nvm_eeprom(hw);
+	if (ret_val)
+		goto release;
+
+	e1000_standby_nvm(hw);
+
+	if ((nvm->address_bits == 8) && (offset >= 128))
+		read_opcode |= NVM_A8_OPCODE_SPI;
+
+	/* Send the READ command (opcode + addr) */
+	e1000_shift_out_eec_bits(hw, read_opcode, nvm->opcode_bits);
+	e1000_shift_out_eec_bits(hw, (u16)(offset*2), nvm->address_bits);
+
+	/* Read the data.  SPI NVMs increment the address with each byte
+	 * read and will roll over if reading beyond the end.  This allows
+	 * us to read the whole NVM from any offset
+	 */
+	for (i = 0; i < words; i++) {
+		word_in = e1000_shift_in_eec_bits(hw, 16);
+		data[i] = (word_in >> 8) | (word_in << 8);
+	}
+
+release:
+	nvm->ops.release(hw);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_read_nvm_microwire - Reads EEPROM's using microwire
+ *  @hw: pointer to the HW structure
+ *  @offset: offset of word in the EEPROM to read
+ *  @words: number of words to read
+ *  @data: word read from the EEPROM
+ *
+ *  Reads a 16 bit word from the EEPROM.
+ **/
+s32 e1000_read_nvm_microwire(struct e1000_hw *hw, u16 offset, u16 words,
+			     u16 *data)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	u32 i = 0;
+	s32 ret_val;
+	u8 read_opcode = NVM_READ_OPCODE_MICROWIRE;
+
+	DEBUGFUNC("e1000_read_nvm_microwire");
+
+	/* A check for invalid values:  offset too large, too many words,
+	 * and not enough words.
+	 */
+	if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
+	    (words == 0)) {
+		DEBUGOUT("nvm parameter(s) out of bounds\n");
+		return -E1000_ERR_NVM;
+	}
+
+	ret_val = nvm->ops.acquire(hw);
+	if (ret_val)
+		return ret_val;
+
+	ret_val = e1000_ready_nvm_eeprom(hw);
+	if (ret_val)
+		goto release;
+
+	for (i = 0; i < words; i++) {
+		/* Send the READ command (opcode + addr) */
+		e1000_shift_out_eec_bits(hw, read_opcode, nvm->opcode_bits);
+		e1000_shift_out_eec_bits(hw, (u16)(offset + i),
+					nvm->address_bits);
+
+		/* Read the data.  For microwire, each word requires the
+		 * overhead of setup and tear-down.
+		 */
+		data[i] = e1000_shift_in_eec_bits(hw, 16);
+		e1000_standby_nvm(hw);
+	}
+
+release:
+	nvm->ops.release(hw);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_read_nvm_eerd - Reads EEPROM using EERD register
+ *  @hw: pointer to the HW structure
+ *  @offset: offset of word in the EEPROM to read
+ *  @words: number of words to read
+ *  @data: word read from the EEPROM
+ *
+ *  Reads a 16 bit word from the EEPROM using the EERD register.
+ **/
+s32 e1000_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	u32 i, eerd = 0;
+	s32 ret_val = E1000_SUCCESS;
+
+	DEBUGFUNC("e1000_read_nvm_eerd");
+
+	/* A check for invalid values:  offset too large, too many words,
+	 * too many words for the offset, and not enough words.
+	 */
+	if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
+	    (words == 0)) {
+		DEBUGOUT("nvm parameter(s) out of bounds\n");
+		return -E1000_ERR_NVM;
+	}
+
+	for (i = 0; i < words; i++) {
+		eerd = ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) +
+		       E1000_NVM_RW_REG_START;
+
+		E1000_WRITE_REG(hw, E1000_EERD, eerd);
+		ret_val = e1000_poll_eerd_eewr_done(hw, E1000_NVM_POLL_READ);
+		if (ret_val)
+			break;
+
+		data[i] = (E1000_READ_REG(hw, E1000_EERD) >>
+			   E1000_NVM_RW_REG_DATA);
+	}
+
+	if (ret_val)
+		DEBUGOUT1("NVM read error: %d\n", ret_val);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_write_nvm_spi - Write to EEPROM using SPI
+ *  @hw: pointer to the HW structure
+ *  @offset: offset within the EEPROM to be written to
+ *  @words: number of words to write
+ *  @data: 16 bit word(s) to be written to the EEPROM
+ *
+ *  Writes data to EEPROM at offset using SPI interface.
+ *
+ *  If e1000_update_nvm_checksum is not called after this function , the
+ *  EEPROM will most likely contain an invalid checksum.
+ **/
+s32 e1000_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	s32 ret_val = -E1000_ERR_NVM;
+	u16 widx = 0;
+
+	DEBUGFUNC("e1000_write_nvm_spi");
+
+	/* A check for invalid values:  offset too large, too many words,
+	 * and not enough words.
+	 */
+	if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
+	    (words == 0)) {
+		DEBUGOUT("nvm parameter(s) out of bounds\n");
+		return -E1000_ERR_NVM;
+	}
+
+	while (widx < words) {
+		u8 write_opcode = NVM_WRITE_OPCODE_SPI;
+
+		ret_val = nvm->ops.acquire(hw);
+		if (ret_val)
+			return ret_val;
+
+		ret_val = e1000_ready_nvm_eeprom(hw);
+		if (ret_val) {
+			nvm->ops.release(hw);
+			return ret_val;
+		}
+
+		e1000_standby_nvm(hw);
+
+		/* Send the WRITE ENABLE command (8 bit opcode) */
+		e1000_shift_out_eec_bits(hw, NVM_WREN_OPCODE_SPI,
+					 nvm->opcode_bits);
+
+		e1000_standby_nvm(hw);
+
+		/* Some SPI eeproms use the 8th address bit embedded in the
+		 * opcode
+		 */
+		if ((nvm->address_bits == 8) && (offset >= 128))
+			write_opcode |= NVM_A8_OPCODE_SPI;
+
+		/* Send the Write command (8-bit opcode + addr) */
+		e1000_shift_out_eec_bits(hw, write_opcode, nvm->opcode_bits);
+		e1000_shift_out_eec_bits(hw, (u16)((offset + widx) * 2),
+					 nvm->address_bits);
+
+		/* Loop to allow for up to whole page write of eeprom */
+		while (widx < words) {
+			u16 word_out = data[widx];
+			word_out = (word_out >> 8) | (word_out << 8);
+			e1000_shift_out_eec_bits(hw, word_out, 16);
+			widx++;
+
+			if ((((offset + widx) * 2) % nvm->page_size) == 0) {
+				e1000_standby_nvm(hw);
+				break;
+			}
+		}
+		msec_delay(10);
+		nvm->ops.release(hw);
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000_write_nvm_microwire - Writes EEPROM using microwire
+ *  @hw: pointer to the HW structure
+ *  @offset: offset within the EEPROM to be written to
+ *  @words: number of words to write
+ *  @data: 16 bit word(s) to be written to the EEPROM
+ *
+ *  Writes data to EEPROM at offset using microwire interface.
+ *
+ *  If e1000_update_nvm_checksum is not called after this function , the
+ *  EEPROM will most likely contain an invalid checksum.
+ **/
+s32 e1000_write_nvm_microwire(struct e1000_hw *hw, u16 offset, u16 words,
+			      u16 *data)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	s32  ret_val;
+	u32 eecd;
+	u16 words_written = 0;
+	u16 widx = 0;
+
+	DEBUGFUNC("e1000_write_nvm_microwire");
+
+	/* A check for invalid values:  offset too large, too many words,
+	 * and not enough words.
+	 */
+	if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
+	    (words == 0)) {
+		DEBUGOUT("nvm parameter(s) out of bounds\n");
+		return -E1000_ERR_NVM;
+	}
+
+	ret_val = nvm->ops.acquire(hw);
+	if (ret_val)
+		return ret_val;
+
+	ret_val = e1000_ready_nvm_eeprom(hw);
+	if (ret_val)
+		goto release;
+
+	e1000_shift_out_eec_bits(hw, NVM_EWEN_OPCODE_MICROWIRE,
+				 (u16)(nvm->opcode_bits + 2));
+
+	e1000_shift_out_eec_bits(hw, 0, (u16)(nvm->address_bits - 2));
+
+	e1000_standby_nvm(hw);
+
+	while (words_written < words) {
+		e1000_shift_out_eec_bits(hw, NVM_WRITE_OPCODE_MICROWIRE,
+					 nvm->opcode_bits);
+
+		e1000_shift_out_eec_bits(hw, (u16)(offset + words_written),
+					 nvm->address_bits);
+
+		e1000_shift_out_eec_bits(hw, data[words_written], 16);
+
+		e1000_standby_nvm(hw);
+
+		for (widx = 0; widx < 200; widx++) {
+			eecd = E1000_READ_REG(hw, E1000_EECD);
+			if (eecd & E1000_EECD_DO)
+				break;
+			usec_delay(50);
+		}
+
+		if (widx == 200) {
+			DEBUGOUT("NVM Write did not complete\n");
+			ret_val = -E1000_ERR_NVM;
+			goto release;
+		}
+
+		e1000_standby_nvm(hw);
+
+		words_written++;
+	}
+
+	e1000_shift_out_eec_bits(hw, NVM_EWDS_OPCODE_MICROWIRE,
+				 (u16)(nvm->opcode_bits + 2));
+
+	e1000_shift_out_eec_bits(hw, 0, (u16)(nvm->address_bits - 2));
+
+release:
+	nvm->ops.release(hw);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_read_pba_string_generic - Read device part number
+ *  @hw: pointer to the HW structure
+ *  @pba_num: pointer to device part number
+ *  @pba_num_size: size of part number buffer
+ *
+ *  Reads the product board assembly (PBA) number from the EEPROM and stores
+ *  the value in pba_num.
+ **/
+s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num,
+				  u32 pba_num_size)
+{
+	s32 ret_val;
+	u16 nvm_data;
+	u16 pba_ptr;
+	u16 offset;
+	u16 length;
+
+	DEBUGFUNC("e1000_read_pba_string_generic");
+
+	if ((hw->mac.type >= e1000_i210) &&
+	    !e1000_get_flash_presence_i210(hw)) {
+		DEBUGOUT("Flashless no PBA string\n");
+		return -E1000_ERR_NVM_PBA_SECTION;
+	}
+
+	if (pba_num == NULL) {
+		DEBUGOUT("PBA string buffer was null\n");
+		return -E1000_ERR_INVALID_ARGUMENT;
+	}
+
+	ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_0, 1, &nvm_data);
+	if (ret_val) {
+		DEBUGOUT("NVM Read Error\n");
+		return ret_val;
+	}
+
+	ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_1, 1, &pba_ptr);
+	if (ret_val) {
+		DEBUGOUT("NVM Read Error\n");
+		return ret_val;
+	}
+
+	/* if nvm_data is not ptr guard the PBA must be in legacy format which
+	 * means pba_ptr is actually our second data word for the PBA number
+	 * and we can decode it into an ascii string
+	 */
+	if (nvm_data != NVM_PBA_PTR_GUARD) {
+		DEBUGOUT("NVM PBA number is not stored as string\n");
+
+		/* make sure callers buffer is big enough to store the PBA */
+		if (pba_num_size < E1000_PBANUM_LENGTH) {
+			DEBUGOUT("PBA string buffer too small\n");
+			return E1000_ERR_NO_SPACE;
+		}
+
+		/* extract hex string from data and pba_ptr */
+		pba_num[0] = (nvm_data >> 12) & 0xF;
+		pba_num[1] = (nvm_data >> 8) & 0xF;
+		pba_num[2] = (nvm_data >> 4) & 0xF;
+		pba_num[3] = nvm_data & 0xF;
+		pba_num[4] = (pba_ptr >> 12) & 0xF;
+		pba_num[5] = (pba_ptr >> 8) & 0xF;
+		pba_num[6] = '-';
+		pba_num[7] = 0;
+		pba_num[8] = (pba_ptr >> 4) & 0xF;
+		pba_num[9] = pba_ptr & 0xF;
+
+		/* put a null character on the end of our string */
+		pba_num[10] = '\0';
+
+		/* switch all the data but the '-' to hex char */
+		for (offset = 0; offset < 10; offset++) {
+			if (pba_num[offset] < 0xA)
+				pba_num[offset] += '0';
+			else if (pba_num[offset] < 0x10)
+				pba_num[offset] += 'A' - 0xA;
+		}
+
+		return E1000_SUCCESS;
+	}
+
+	ret_val = hw->nvm.ops.read(hw, pba_ptr, 1, &length);
+	if (ret_val) {
+		DEBUGOUT("NVM Read Error\n");
+		return ret_val;
+	}
+
+	if (length == 0xFFFF || length == 0) {
+		DEBUGOUT("NVM PBA number section invalid length\n");
+		return -E1000_ERR_NVM_PBA_SECTION;
+	}
+	/* check if pba_num buffer is big enough */
+	if (pba_num_size < (((u32)length * 2) - 1)) {
+		DEBUGOUT("PBA string buffer too small\n");
+		return -E1000_ERR_NO_SPACE;
+	}
+
+	/* trim pba length from start of string */
+	pba_ptr++;
+	length--;
+
+	for (offset = 0; offset < length; offset++) {
+		ret_val = hw->nvm.ops.read(hw, pba_ptr + offset, 1, &nvm_data);
+		if (ret_val) {
+			DEBUGOUT("NVM Read Error\n");
+			return ret_val;
+		}
+		pba_num[offset * 2] = (u8)(nvm_data >> 8);
+		pba_num[(offset * 2) + 1] = (u8)(nvm_data & 0xFF);
+	}
+	pba_num[offset * 2] = '\0';
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_read_pba_length_generic - Read device part number length
+ *  @hw: pointer to the HW structure
+ *  @pba_num_size: size of part number buffer
+ *
+ *  Reads the product board assembly (PBA) number length from the EEPROM and
+ *  stores the value in pba_num_size.
+ **/
+s32 e1000_read_pba_length_generic(struct e1000_hw *hw, u32 *pba_num_size)
+{
+	s32 ret_val;
+	u16 nvm_data;
+	u16 pba_ptr;
+	u16 length;
+
+	DEBUGFUNC("e1000_read_pba_length_generic");
+
+	if (pba_num_size == NULL) {
+		DEBUGOUT("PBA buffer size was null\n");
+		return -E1000_ERR_INVALID_ARGUMENT;
+	}
+
+	ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_0, 1, &nvm_data);
+	if (ret_val) {
+		DEBUGOUT("NVM Read Error\n");
+		return ret_val;
+	}
+
+	ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_1, 1, &pba_ptr);
+	if (ret_val) {
+		DEBUGOUT("NVM Read Error\n");
+		return ret_val;
+	}
+
+	 /* if data is not ptr guard the PBA must be in legacy format */
+	if (nvm_data != NVM_PBA_PTR_GUARD) {
+		*pba_num_size = E1000_PBANUM_LENGTH;
+		return E1000_SUCCESS;
+	}
+
+	ret_val = hw->nvm.ops.read(hw, pba_ptr, 1, &length);
+	if (ret_val) {
+		DEBUGOUT("NVM Read Error\n");
+		return ret_val;
+	}
+
+	if (length == 0xFFFF || length == 0) {
+		DEBUGOUT("NVM PBA number section invalid length\n");
+		return -E1000_ERR_NVM_PBA_SECTION;
+	}
+
+	/* Convert from length in u16 values to u8 chars, add 1 for NULL,
+	 * and subtract 2 because length field is included in length.
+	 */
+	*pba_num_size = ((u32)length * 2) - 1;
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_read_pba_num_generic - Read device part number
+ *  @hw: pointer to the HW structure
+ *  @pba_num: pointer to device part number
+ *
+ *  Reads the product board assembly (PBA) number from the EEPROM and stores
+ *  the value in pba_num.
+ **/
+s32 e1000_read_pba_num_generic(struct e1000_hw *hw, u32 *pba_num)
+{
+	s32 ret_val;
+	u16 nvm_data;
+
+	DEBUGFUNC("e1000_read_pba_num_generic");
+
+	ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_0, 1, &nvm_data);
+	if (ret_val) {
+		DEBUGOUT("NVM Read Error\n");
+		return ret_val;
+	} else if (nvm_data == NVM_PBA_PTR_GUARD) {
+		DEBUGOUT("NVM Not Supported\n");
+		return -E1000_NOT_IMPLEMENTED;
+	}
+	*pba_num = (u32)(nvm_data << 16);
+
+	ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_1, 1, &nvm_data);
+	if (ret_val) {
+		DEBUGOUT("NVM Read Error\n");
+		return ret_val;
+	}
+	*pba_num |= nvm_data;
+
+	return E1000_SUCCESS;
+}
+
+
+/**
+ *  e1000_read_pba_raw
+ *  @hw: pointer to the HW structure
+ *  @eeprom_buf: optional pointer to EEPROM image
+ *  @eeprom_buf_size: size of EEPROM image in words
+ *  @max_pba_block_size: PBA block size limit
+ *  @pba: pointer to output PBA structure
+ *
+ *  Reads PBA from EEPROM image when eeprom_buf is not NULL.
+ *  Reads PBA from physical EEPROM device when eeprom_buf is NULL.
+ *
+ **/
+s32 e1000_read_pba_raw(struct e1000_hw *hw, u16 *eeprom_buf,
+		       u32 eeprom_buf_size, u16 max_pba_block_size,
+		       struct e1000_pba *pba)
+{
+	s32 ret_val;
+	u16 pba_block_size;
+
+	if (pba == NULL)
+		return -E1000_ERR_PARAM;
+
+	if (eeprom_buf == NULL) {
+		ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_0, 2,
+					 &pba->word[0]);
+		if (ret_val)
+			return ret_val;
+	} else {
+		if (eeprom_buf_size > NVM_PBA_OFFSET_1) {
+			pba->word[0] = eeprom_buf[NVM_PBA_OFFSET_0];
+			pba->word[1] = eeprom_buf[NVM_PBA_OFFSET_1];
+		} else {
+			return -E1000_ERR_PARAM;
+		}
+	}
+
+	if (pba->word[0] == NVM_PBA_PTR_GUARD) {
+		if (pba->pba_block == NULL)
+			return -E1000_ERR_PARAM;
+
+		ret_val = e1000_get_pba_block_size(hw, eeprom_buf,
+						   eeprom_buf_size,
+						   &pba_block_size);
+		if (ret_val)
+			return ret_val;
+
+		if (pba_block_size > max_pba_block_size)
+			return -E1000_ERR_PARAM;
+
+		if (eeprom_buf == NULL) {
+			ret_val = e1000_read_nvm(hw, pba->word[1],
+						 pba_block_size,
+						 pba->pba_block);
+			if (ret_val)
+				return ret_val;
+		} else {
+			if (eeprom_buf_size > (u32)(pba->word[1] +
+					      pba_block_size)) {
+				memcpy(pba->pba_block,
+				       &eeprom_buf[pba->word[1]],
+				       pba_block_size * sizeof(u16));
+			} else {
+				return -E1000_ERR_PARAM;
+			}
+		}
+	}
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_write_pba_raw
+ *  @hw: pointer to the HW structure
+ *  @eeprom_buf: optional pointer to EEPROM image
+ *  @eeprom_buf_size: size of EEPROM image in words
+ *  @pba: pointer to PBA structure
+ *
+ *  Writes PBA to EEPROM image when eeprom_buf is not NULL.
+ *  Writes PBA to physical EEPROM device when eeprom_buf is NULL.
+ *
+ **/
+s32 e1000_write_pba_raw(struct e1000_hw *hw, u16 *eeprom_buf,
+			u32 eeprom_buf_size, struct e1000_pba *pba)
+{
+	s32 ret_val;
+
+	if (pba == NULL)
+		return -E1000_ERR_PARAM;
+
+	if (eeprom_buf == NULL) {
+		ret_val = e1000_write_nvm(hw, NVM_PBA_OFFSET_0, 2,
+					  &pba->word[0]);
+		if (ret_val)
+			return ret_val;
+	} else {
+		if (eeprom_buf_size > NVM_PBA_OFFSET_1) {
+			eeprom_buf[NVM_PBA_OFFSET_0] = pba->word[0];
+			eeprom_buf[NVM_PBA_OFFSET_1] = pba->word[1];
+		} else {
+			return -E1000_ERR_PARAM;
+		}
+	}
+
+	if (pba->word[0] == NVM_PBA_PTR_GUARD) {
+		if (pba->pba_block == NULL)
+			return -E1000_ERR_PARAM;
+
+		if (eeprom_buf == NULL) {
+			ret_val = e1000_write_nvm(hw, pba->word[1],
+						  pba->pba_block[0],
+						  pba->pba_block);
+			if (ret_val)
+				return ret_val;
+		} else {
+			if (eeprom_buf_size > (u32)(pba->word[1] +
+					      pba->pba_block[0])) {
+				memcpy(&eeprom_buf[pba->word[1]],
+				       pba->pba_block,
+				       pba->pba_block[0] * sizeof(u16));
+			} else {
+				return -E1000_ERR_PARAM;
+			}
+		}
+	}
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_get_pba_block_size
+ *  @hw: pointer to the HW structure
+ *  @eeprom_buf: optional pointer to EEPROM image
+ *  @eeprom_buf_size: size of EEPROM image in words
+ *  @pba_data_size: pointer to output variable
+ *
+ *  Returns the size of the PBA block in words. Function operates on EEPROM
+ *  image if the eeprom_buf pointer is not NULL otherwise it accesses physical
+ *  EEPROM device.
+ *
+ **/
+s32 e1000_get_pba_block_size(struct e1000_hw *hw, u16 *eeprom_buf,
+			     u32 eeprom_buf_size, u16 *pba_block_size)
+{
+	s32 ret_val;
+	u16 pba_word[2];
+	u16 length;
+
+	DEBUGFUNC("e1000_get_pba_block_size");
+
+	if (eeprom_buf == NULL) {
+		ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_0, 2, &pba_word[0]);
+		if (ret_val)
+			return ret_val;
+	} else {
+		if (eeprom_buf_size > NVM_PBA_OFFSET_1) {
+			pba_word[0] = eeprom_buf[NVM_PBA_OFFSET_0];
+			pba_word[1] = eeprom_buf[NVM_PBA_OFFSET_1];
+		} else {
+			return -E1000_ERR_PARAM;
+		}
+	}
+
+	if (pba_word[0] == NVM_PBA_PTR_GUARD) {
+		if (eeprom_buf == NULL) {
+			ret_val = e1000_read_nvm(hw, pba_word[1] + 0, 1,
+						 &length);
+			if (ret_val)
+				return ret_val;
+		} else {
+			if (eeprom_buf_size > pba_word[1])
+				length = eeprom_buf[pba_word[1] + 0];
+			else
+				return -E1000_ERR_PARAM;
+		}
+
+		if (length == 0xFFFF || length == 0)
+			return -E1000_ERR_NVM_PBA_SECTION;
+	} else {
+		/* PBA number in legacy format, there is no PBA Block. */
+		length = 0;
+	}
+
+	if (pba_block_size != NULL)
+		*pba_block_size = length;
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_read_mac_addr_generic - Read device MAC address
+ *  @hw: pointer to the HW structure
+ *
+ *  Reads the device MAC address from the EEPROM and stores the value.
+ *  Since devices with two ports use the same EEPROM, we increment the
+ *  last bit in the MAC address for the second port.
+ **/
+s32 e1000_read_mac_addr_generic(struct e1000_hw *hw)
+{
+	u32 rar_high;
+	u32 rar_low;
+	u16 i;
+
+	rar_high = E1000_READ_REG(hw, E1000_RAH(0));
+	rar_low = E1000_READ_REG(hw, E1000_RAL(0));
+
+	for (i = 0; i < E1000_RAL_MAC_ADDR_LEN; i++)
+		hw->mac.perm_addr[i] = (u8)(rar_low >> (i*8));
+
+	for (i = 0; i < E1000_RAH_MAC_ADDR_LEN; i++)
+		hw->mac.perm_addr[i+4] = (u8)(rar_high >> (i*8));
+
+	for (i = 0; i < ETH_ADDR_LEN; i++)
+		hw->mac.addr[i] = hw->mac.perm_addr[i];
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_validate_nvm_checksum_generic - Validate EEPROM checksum
+ *  @hw: pointer to the HW structure
+ *
+ *  Calculates the EEPROM checksum by reading/adding each word of the EEPROM
+ *  and then verifies that the sum of the EEPROM is equal to 0xBABA.
+ **/
+s32 e1000_validate_nvm_checksum_generic(struct e1000_hw *hw)
+{
+	s32 ret_val;
+	u16 checksum = 0;
+	u16 i, nvm_data;
+
+	DEBUGFUNC("e1000_validate_nvm_checksum_generic");
+
+	for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) {
+		ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
+		if (ret_val) {
+			DEBUGOUT("NVM Read Error\n");
+			return ret_val;
+		}
+		checksum += nvm_data;
+	}
+
+	if (checksum != (u16) NVM_SUM) {
+		DEBUGOUT("NVM Checksum Invalid\n");
+		return -E1000_ERR_NVM;
+	}
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_update_nvm_checksum_generic - Update EEPROM checksum
+ *  @hw: pointer to the HW structure
+ *
+ *  Updates the EEPROM checksum by reading/adding each word of the EEPROM
+ *  up to the checksum.  Then calculates the EEPROM checksum and writes the
+ *  value to the EEPROM.
+ **/
+s32 e1000_update_nvm_checksum_generic(struct e1000_hw *hw)
+{
+	s32 ret_val;
+	u16 checksum = 0;
+	u16 i, nvm_data;
+
+	DEBUGFUNC("e1000_update_nvm_checksum");
+
+	for (i = 0; i < NVM_CHECKSUM_REG; i++) {
+		ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
+		if (ret_val) {
+			DEBUGOUT("NVM Read Error while updating checksum.\n");
+			return ret_val;
+		}
+		checksum += nvm_data;
+	}
+	checksum = (u16) NVM_SUM - checksum;
+	ret_val = hw->nvm.ops.write(hw, NVM_CHECKSUM_REG, 1, &checksum);
+	if (ret_val)
+		DEBUGOUT("NVM Write Error while updating checksum.\n");
+
+	return ret_val;
+}
+
+/**
+ *  e1000_reload_nvm_generic - Reloads EEPROM
+ *  @hw: pointer to the HW structure
+ *
+ *  Reloads the EEPROM by setting the "Reinitialize from EEPROM" bit in the
+ *  extended control register.
+ **/
+STATIC void e1000_reload_nvm_generic(struct e1000_hw *hw)
+{
+	u32 ctrl_ext;
+
+	DEBUGFUNC("e1000_reload_nvm_generic");
+
+	usec_delay(10);
+	ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT);
+	ctrl_ext |= E1000_CTRL_EXT_EE_RST;
+	E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext);
+	E1000_WRITE_FLUSH(hw);
+}
+
+/**
+ *  e1000_get_fw_version - Get firmware version information
+ *  @hw: pointer to the HW structure
+ *  @fw_vers: pointer to output version structure
+ *
+ *  unsupported/not present features return 0 in version structure
+ **/
+void e1000_get_fw_version(struct e1000_hw *hw, struct e1000_fw_version *fw_vers)
+{
+	u16 eeprom_verh, eeprom_verl, etrack_test, fw_version;
+	u8 q, hval, rem, result;
+	u16 comb_verh, comb_verl, comb_offset;
+
+	memset(fw_vers, 0, sizeof(struct e1000_fw_version));
+
+	/* basic eeprom version numbers, bits used vary by part and by tool
+	 * used to create the nvm images */
+	/* Check which data format we have */
+	switch (hw->mac.type) {
+	case e1000_i211:
+		e1000_read_invm_version(hw, fw_vers);
+		return;
+	case e1000_82575:
+	case e1000_82576:
+	case e1000_82580:
+		hw->nvm.ops.read(hw, NVM_ETRACK_HIWORD, 1, &etrack_test);
+		/* Use this format, unless EETRACK ID exists,
+		 * then use alternate format
+		 */
+		if ((etrack_test &  NVM_MAJOR_MASK) != NVM_ETRACK_VALID) {
+			hw->nvm.ops.read(hw, NVM_VERSION, 1, &fw_version);
+			fw_vers->eep_major = (fw_version & NVM_MAJOR_MASK)
+					      >> NVM_MAJOR_SHIFT;
+			fw_vers->eep_minor = (fw_version & NVM_MINOR_MASK)
+					      >> NVM_MINOR_SHIFT;
+			fw_vers->eep_build = (fw_version & NVM_IMAGE_ID_MASK);
+			goto etrack_id;
+		}
+		break;
+	case e1000_i210:
+		if (!(e1000_get_flash_presence_i210(hw))) {
+			e1000_read_invm_version(hw, fw_vers);
+			return;
+		}
+		/* fall through */
+	case e1000_i350:
+		hw->nvm.ops.read(hw, NVM_ETRACK_HIWORD, 1, &etrack_test);
+		/* find combo image version */
+		hw->nvm.ops.read(hw, NVM_COMB_VER_PTR, 1, &comb_offset);
+		if ((comb_offset != 0x0) &&
+		    (comb_offset != NVM_VER_INVALID)) {
+
+			hw->nvm.ops.read(hw, (NVM_COMB_VER_OFF + comb_offset
+					 + 1), 1, &comb_verh);
+			hw->nvm.ops.read(hw, (NVM_COMB_VER_OFF + comb_offset),
+					 1, &comb_verl);
+
+			/* get Option Rom version if it exists and is valid */
+			if ((comb_verh && comb_verl) &&
+			    ((comb_verh != NVM_VER_INVALID) &&
+			     (comb_verl != NVM_VER_INVALID))) {
+
+				fw_vers->or_valid = true;
+				fw_vers->or_major =
+					comb_verl >> NVM_COMB_VER_SHFT;
+				fw_vers->or_build =
+					(comb_verl << NVM_COMB_VER_SHFT)
+					| (comb_verh >> NVM_COMB_VER_SHFT);
+				fw_vers->or_patch =
+					comb_verh & NVM_COMB_VER_MASK;
+			}
+		}
+		break;
+	default:
+		hw->nvm.ops.read(hw, NVM_ETRACK_HIWORD, 1, &etrack_test);
+		return;
+	}
+	hw->nvm.ops.read(hw, NVM_VERSION, 1, &fw_version);
+	fw_vers->eep_major = (fw_version & NVM_MAJOR_MASK)
+			      >> NVM_MAJOR_SHIFT;
+
+	/* check for old style version format in newer images*/
+	if ((fw_version & NVM_NEW_DEC_MASK) == 0x0) {
+		eeprom_verl = (fw_version & NVM_COMB_VER_MASK);
+	} else {
+		eeprom_verl = (fw_version & NVM_MINOR_MASK)
+				>> NVM_MINOR_SHIFT;
+	}
+	/* Convert minor value to hex before assigning to output struct
+	 * Val to be converted will not be higher than 99, per tool output
+	 */
+	q = eeprom_verl / NVM_HEX_CONV;
+	hval = q * NVM_HEX_TENS;
+	rem = eeprom_verl % NVM_HEX_CONV;
+	result = hval + rem;
+	fw_vers->eep_minor = result;
+
+etrack_id:
+	if ((etrack_test &  NVM_MAJOR_MASK) == NVM_ETRACK_VALID) {
+		hw->nvm.ops.read(hw, NVM_ETRACK_WORD, 1, &eeprom_verl);
+		hw->nvm.ops.read(hw, (NVM_ETRACK_WORD + 1), 1, &eeprom_verh);
+		fw_vers->etrack_id = (eeprom_verh << NVM_ETRACK_SHIFT)
+			| eeprom_verl;
+	} else if ((etrack_test & NVM_ETRACK_VALID) == 0) {
+		hw->nvm.ops.read(hw, NVM_ETRACK_WORD, 1, &eeprom_verh);
+		hw->nvm.ops.read(hw, (NVM_ETRACK_WORD + 1), 1, &eeprom_verl);
+		fw_vers->etrack_id = (eeprom_verh << NVM_ETRACK_SHIFT) |
+				     eeprom_verl;
+	}
+}
+
+