Imported Upstream version 16.04

Change-Id: I77eadcd8538a9122e4773cbe55b24033dc451757
Signed-off-by: C.J. Collier <cjcollier@linuxfoundation.org>

27 files changed, 27185 insertions, 0 deletions

diff --git a/drivers/net/ixgbe/base/README b/drivers/net/ixgbe/base/README
new file mode 100644
index 00000000..caa26640
--- /dev/null
+++ b/drivers/net/ixgbe/base/README
@@ -0,0 +1,61 @@
+..
+     BSD LICENSE
+   
+     Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+     All rights reserved.
+   
+     Redistribution and use in source and binary forms, with or without
+     modification, are permitted provided that the following conditions
+     are met:
+   
+       * Redistributions of source code must retain the above copyright
+         notice, this list of conditions and the following disclaimer.
+       * Redistributions in binary form must reproduce the above copyright
+         notice, this list of conditions and the following disclaimer in
+         the documentation and/or other materials provided with the
+         distribution.
+       * Neither the name of Intel Corporation nor the names of its
+         contributors may be used to endorse or promote products derived
+         from this software without specific prior written permission.
+   
+     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+     "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+     LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+     A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+     OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+     LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+     DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+     THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+     (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+     OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+Intel® IXGBE driver
+===================
+
+This directory contains source code of FreeBSD ixgbe driver of version
+cid-10g-shared-code.2016.01.07 released by ND. The sub-directory of base/
+contains the original source package.
+This driver is valid for the product(s) listed below
+
+* Intel® 10 Gigabit AF DA Dual Port Server Adapter
+* Intel® 10 Gigabit AT Server Adapter
+* Intel® 10 Gigabit AT2 Server Adapter
+* Intel® 10 Gigabit CX4 Dual Port Server Adapter
+* Intel® 10 Gigabit XF LR Server Adapter
+* Intel® 10 Gigabit XF SR Dual Port Server Adapter
+* Intel® 10 Gigabit XF SR Server Adapter
+* Intel® 82598 10 Gigabit Ethernet Controller
+* Intel® 82599 10 Gigabit Ethernet Controller
+* Intel® Ethernet Controller X540-AT2
+* Intel® Ethernet Server Adapter X520 Series
+* Intel® Ethernet Server Adapter X520-T2
+* Intel® Ethernet Controller X550 Series
+
+Updating the driver
+===================
+
+NOTE: The source code in this directory should not be modified apart from
+the following file(s):
+
+    ixgbe_osdep.h
diff --git a/drivers/net/ixgbe/base/ixgbe_82598.c b/drivers/net/ixgbe/base/ixgbe_82598.c
new file mode 100644
index 00000000..9e65fffa
--- /dev/null
+++ b/drivers/net/ixgbe/base/ixgbe_82598.c
@@ -0,0 +1,1436 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+    this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in the
+    documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+    contributors may be used to endorse or promote products derived from
+    this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#include "ixgbe_type.h"
+#include "ixgbe_82598.h"
+#include "ixgbe_api.h"
+#include "ixgbe_common.h"
+#include "ixgbe_phy.h"
+
+#define IXGBE_82598_MAX_TX_QUEUES 32
+#define IXGBE_82598_MAX_RX_QUEUES 64
+#define IXGBE_82598_RAR_ENTRIES   16
+#define IXGBE_82598_MC_TBL_SIZE  128
+#define IXGBE_82598_VFT_TBL_SIZE 128
+#define IXGBE_82598_RX_PB_SIZE   512
+
+STATIC s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw,
+					     ixgbe_link_speed *speed,
+					     bool *autoneg);
+STATIC enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw);
+STATIC s32 ixgbe_start_mac_link_82598(struct ixgbe_hw *hw,
+				      bool autoneg_wait_to_complete);
+STATIC s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw,
+				      ixgbe_link_speed *speed, bool *link_up,
+				      bool link_up_wait_to_complete);
+STATIC s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw,
+				      ixgbe_link_speed speed,
+				      bool autoneg_wait_to_complete);
+STATIC s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw,
+					 ixgbe_link_speed speed,
+					 bool autoneg_wait_to_complete);
+STATIC s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw);
+STATIC s32 ixgbe_clear_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq);
+STATIC s32 ixgbe_clear_vfta_82598(struct ixgbe_hw *hw);
+STATIC void ixgbe_set_rxpba_82598(struct ixgbe_hw *hw, int num_pb,
+				  u32 headroom, int strategy);
+STATIC s32 ixgbe_read_i2c_sff8472_82598(struct ixgbe_hw *hw, u8 byte_offset,
+					u8 *sff8472_data);
+/**
+ *  ixgbe_set_pcie_completion_timeout - set pci-e completion timeout
+ *  @hw: pointer to the HW structure
+ *
+ *  The defaults for 82598 should be in the range of 50us to 50ms,
+ *  however the hardware default for these parts is 500us to 1ms which is less
+ *  than the 10ms recommended by the pci-e spec.  To address this we need to
+ *  increase the value to either 10ms to 250ms for capability version 1 config,
+ *  or 16ms to 55ms for version 2.
+ **/
+void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw)
+{
+	u32 gcr = IXGBE_READ_REG(hw, IXGBE_GCR);
+	u16 pcie_devctl2;
+
+	/* only take action if timeout value is defaulted to 0 */
+	if (gcr & IXGBE_GCR_CMPL_TMOUT_MASK)
+		goto out;
+
+	/*
+	 * if capababilities version is type 1 we can write the
+	 * timeout of 10ms to 250ms through the GCR register
+	 */
+	if (!(gcr & IXGBE_GCR_CAP_VER2)) {
+		gcr |= IXGBE_GCR_CMPL_TMOUT_10ms;
+		goto out;
+	}
+
+	/*
+	 * for version 2 capabilities we need to write the config space
+	 * directly in order to set the completion timeout value for
+	 * 16ms to 55ms
+	 */
+	pcie_devctl2 = IXGBE_READ_PCIE_WORD(hw, IXGBE_PCI_DEVICE_CONTROL2);
+	pcie_devctl2 |= IXGBE_PCI_DEVICE_CONTROL2_16ms;
+	IXGBE_WRITE_PCIE_WORD(hw, IXGBE_PCI_DEVICE_CONTROL2, pcie_devctl2);
+out:
+	/* disable completion timeout resend */
+	gcr &= ~IXGBE_GCR_CMPL_TMOUT_RESEND;
+	IXGBE_WRITE_REG(hw, IXGBE_GCR, gcr);
+}
+
+/**
+ *  ixgbe_init_ops_82598 - Inits func ptrs and MAC type
+ *  @hw: pointer to hardware structure
+ *
+ *  Initialize the function pointers and assign the MAC type for 82598.
+ *  Does not touch the hardware.
+ **/
+s32 ixgbe_init_ops_82598(struct ixgbe_hw *hw)
+{
+	struct ixgbe_mac_info *mac = &hw->mac;
+	struct ixgbe_phy_info *phy = &hw->phy;
+	s32 ret_val;
+
+	DEBUGFUNC("ixgbe_init_ops_82598");
+
+	ret_val = ixgbe_init_phy_ops_generic(hw);
+	ret_val = ixgbe_init_ops_generic(hw);
+
+	/* PHY */
+	phy->ops.init = ixgbe_init_phy_ops_82598;
+
+	/* MAC */
+	mac->ops.start_hw = ixgbe_start_hw_82598;
+	mac->ops.enable_relaxed_ordering = ixgbe_enable_relaxed_ordering_82598;
+	mac->ops.reset_hw = ixgbe_reset_hw_82598;
+	mac->ops.get_media_type = ixgbe_get_media_type_82598;
+	mac->ops.get_supported_physical_layer =
+				ixgbe_get_supported_physical_layer_82598;
+	mac->ops.read_analog_reg8 = ixgbe_read_analog_reg8_82598;
+	mac->ops.write_analog_reg8 = ixgbe_write_analog_reg8_82598;
+	mac->ops.set_lan_id = ixgbe_set_lan_id_multi_port_pcie_82598;
+	mac->ops.enable_rx_dma = ixgbe_enable_rx_dma_82598;
+
+	/* RAR, Multicast, VLAN */
+	mac->ops.set_vmdq = ixgbe_set_vmdq_82598;
+	mac->ops.clear_vmdq = ixgbe_clear_vmdq_82598;
+	mac->ops.set_vfta = ixgbe_set_vfta_82598;
+	mac->ops.set_vlvf = NULL;
+	mac->ops.clear_vfta = ixgbe_clear_vfta_82598;
+
+	/* Flow Control */
+	mac->ops.fc_enable = ixgbe_fc_enable_82598;
+
+	mac->mcft_size		= IXGBE_82598_MC_TBL_SIZE;
+	mac->vft_size		= IXGBE_82598_VFT_TBL_SIZE;
+	mac->num_rar_entries	= IXGBE_82598_RAR_ENTRIES;
+	mac->rx_pb_size		= IXGBE_82598_RX_PB_SIZE;
+	mac->max_rx_queues	= IXGBE_82598_MAX_RX_QUEUES;
+	mac->max_tx_queues	= IXGBE_82598_MAX_TX_QUEUES;
+	mac->max_msix_vectors	= ixgbe_get_pcie_msix_count_generic(hw);
+
+	/* SFP+ Module */
+	phy->ops.read_i2c_eeprom = ixgbe_read_i2c_eeprom_82598;
+	phy->ops.read_i2c_sff8472 = ixgbe_read_i2c_sff8472_82598;
+
+	/* Link */
+	mac->ops.check_link = ixgbe_check_mac_link_82598;
+	mac->ops.setup_link = ixgbe_setup_mac_link_82598;
+	mac->ops.flap_tx_laser = NULL;
+	mac->ops.get_link_capabilities = ixgbe_get_link_capabilities_82598;
+	mac->ops.setup_rxpba = ixgbe_set_rxpba_82598;
+
+	/* Manageability interface */
+	mac->ops.set_fw_drv_ver = NULL;
+
+	mac->ops.get_rtrup2tc = NULL;
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_init_phy_ops_82598 - PHY/SFP specific init
+ *  @hw: pointer to hardware structure
+ *
+ *  Initialize any function pointers that were not able to be
+ *  set during init_shared_code because the PHY/SFP type was
+ *  not known.  Perform the SFP init if necessary.
+ *
+ **/
+s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw)
+{
+	struct ixgbe_mac_info *mac = &hw->mac;
+	struct ixgbe_phy_info *phy = &hw->phy;
+	s32 ret_val = IXGBE_SUCCESS;
+	u16 list_offset, data_offset;
+
+	DEBUGFUNC("ixgbe_init_phy_ops_82598");
+
+	/* Identify the PHY */
+	phy->ops.identify(hw);
+
+	/* Overwrite the link function pointers if copper PHY */
+	if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) {
+		mac->ops.setup_link = ixgbe_setup_copper_link_82598;
+		mac->ops.get_link_capabilities =
+				ixgbe_get_copper_link_capabilities_generic;
+	}
+
+	switch (hw->phy.type) {
+	case ixgbe_phy_tn:
+		phy->ops.setup_link = ixgbe_setup_phy_link_tnx;
+		phy->ops.check_link = ixgbe_check_phy_link_tnx;
+		phy->ops.get_firmware_version =
+					ixgbe_get_phy_firmware_version_tnx;
+		break;
+	case ixgbe_phy_nl:
+		phy->ops.reset = ixgbe_reset_phy_nl;
+
+		/* Call SFP+ identify routine to get the SFP+ module type */
+		ret_val = phy->ops.identify_sfp(hw);
+		if (ret_val != IXGBE_SUCCESS)
+			goto out;
+		else if (hw->phy.sfp_type == ixgbe_sfp_type_unknown) {
+			ret_val = IXGBE_ERR_SFP_NOT_SUPPORTED;
+			goto out;
+		}
+
+		/* Check to see if SFP+ module is supported */
+		ret_val = ixgbe_get_sfp_init_sequence_offsets(hw,
+							      &list_offset,
+							      &data_offset);
+		if (ret_val != IXGBE_SUCCESS) {
+			ret_val = IXGBE_ERR_SFP_NOT_SUPPORTED;
+			goto out;
+		}
+		break;
+	default:
+		break;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  ixgbe_start_hw_82598 - Prepare hardware for Tx/Rx
+ *  @hw: pointer to hardware structure
+ *
+ *  Starts the hardware using the generic start_hw function.
+ *  Disables relaxed ordering Then set pcie completion timeout
+ *
+ **/
+s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw)
+{
+	u32 regval;
+	u32 i;
+	s32 ret_val = IXGBE_SUCCESS;
+
+	DEBUGFUNC("ixgbe_start_hw_82598");
+
+	ret_val = ixgbe_start_hw_generic(hw);
+	if (ret_val)
+		return ret_val;
+
+	/* Disable relaxed ordering */
+	for (i = 0; ((i < hw->mac.max_tx_queues) &&
+	     (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) {
+		regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i));
+		regval &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN;
+		IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(i), regval);
+	}
+
+	for (i = 0; ((i < hw->mac.max_rx_queues) &&
+	     (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) {
+		regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
+		regval &= ~(IXGBE_DCA_RXCTRL_DATA_WRO_EN |
+			    IXGBE_DCA_RXCTRL_HEAD_WRO_EN);
+		IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
+	}
+
+	/* set the completion timeout for interface */
+	ixgbe_set_pcie_completion_timeout(hw);
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_get_link_capabilities_82598 - Determines link capabilities
+ *  @hw: pointer to hardware structure
+ *  @speed: pointer to link speed
+ *  @autoneg: boolean auto-negotiation value
+ *
+ *  Determines the link capabilities by reading the AUTOC register.
+ **/
+STATIC s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw,
+					     ixgbe_link_speed *speed,
+					     bool *autoneg)
+{
+	s32 status = IXGBE_SUCCESS;
+	u32 autoc = 0;
+
+	DEBUGFUNC("ixgbe_get_link_capabilities_82598");
+
+	/*
+	 * Determine link capabilities based on the stored value of AUTOC,
+	 * which represents EEPROM defaults.  If AUTOC value has not been
+	 * stored, use the current register value.
+	 */
+	if (hw->mac.orig_link_settings_stored)
+		autoc = hw->mac.orig_autoc;
+	else
+		autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+
+	switch (autoc & IXGBE_AUTOC_LMS_MASK) {
+	case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
+		*speed = IXGBE_LINK_SPEED_1GB_FULL;
+		*autoneg = false;
+		break;
+
+	case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
+		*speed = IXGBE_LINK_SPEED_10GB_FULL;
+		*autoneg = false;
+		break;
+
+	case IXGBE_AUTOC_LMS_1G_AN:
+		*speed = IXGBE_LINK_SPEED_1GB_FULL;
+		*autoneg = true;
+		break;
+
+	case IXGBE_AUTOC_LMS_KX4_AN:
+	case IXGBE_AUTOC_LMS_KX4_AN_1G_AN:
+		*speed = IXGBE_LINK_SPEED_UNKNOWN;
+		if (autoc & IXGBE_AUTOC_KX4_SUPP)
+			*speed |= IXGBE_LINK_SPEED_10GB_FULL;
+		if (autoc & IXGBE_AUTOC_KX_SUPP)
+			*speed |= IXGBE_LINK_SPEED_1GB_FULL;
+		*autoneg = true;
+		break;
+
+	default:
+		status = IXGBE_ERR_LINK_SETUP;
+		break;
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_get_media_type_82598 - Determines media type
+ *  @hw: pointer to hardware structure
+ *
+ *  Returns the media type (fiber, copper, backplane)
+ **/
+STATIC enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw)
+{
+	enum ixgbe_media_type media_type;
+
+	DEBUGFUNC("ixgbe_get_media_type_82598");
+
+	/* Detect if there is a copper PHY attached. */
+	switch (hw->phy.type) {
+	case ixgbe_phy_cu_unknown:
+	case ixgbe_phy_tn:
+		media_type = ixgbe_media_type_copper;
+		goto out;
+	default:
+		break;
+	}
+
+	/* Media type for I82598 is based on device ID */
+	switch (hw->device_id) {
+	case IXGBE_DEV_ID_82598:
+	case IXGBE_DEV_ID_82598_BX:
+		/* Default device ID is mezzanine card KX/KX4 */
+		media_type = ixgbe_media_type_backplane;
+		break;
+	case IXGBE_DEV_ID_82598AF_DUAL_PORT:
+	case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
+	case IXGBE_DEV_ID_82598_DA_DUAL_PORT:
+	case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM:
+	case IXGBE_DEV_ID_82598EB_XF_LR:
+	case IXGBE_DEV_ID_82598EB_SFP_LOM:
+		media_type = ixgbe_media_type_fiber;
+		break;
+	case IXGBE_DEV_ID_82598EB_CX4:
+	case IXGBE_DEV_ID_82598_CX4_DUAL_PORT:
+		media_type = ixgbe_media_type_cx4;
+		break;
+	case IXGBE_DEV_ID_82598AT:
+	case IXGBE_DEV_ID_82598AT2:
+		media_type = ixgbe_media_type_copper;
+		break;
+	default:
+		media_type = ixgbe_media_type_unknown;
+		break;
+	}
+out:
+	return media_type;
+}
+
+/**
+ *  ixgbe_fc_enable_82598 - Enable flow control
+ *  @hw: pointer to hardware structure
+ *
+ *  Enable flow control according to the current settings.
+ **/
+s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw)
+{
+	s32 ret_val = IXGBE_SUCCESS;
+	u32 fctrl_reg;
+	u32 rmcs_reg;
+	u32 reg;
+	u32 fcrtl, fcrth;
+	u32 link_speed = 0;
+	int i;
+	bool link_up;
+
+	DEBUGFUNC("ixgbe_fc_enable_82598");
+
+	/* Validate the water mark configuration */
+	if (!hw->fc.pause_time) {
+		ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
+		goto out;
+	}
+
+	/* Low water mark of zero causes XOFF floods */
+	for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) {
+		if ((hw->fc.current_mode & ixgbe_fc_tx_pause) &&
+		    hw->fc.high_water[i]) {
+			if (!hw->fc.low_water[i] ||
+			    hw->fc.low_water[i] >= hw->fc.high_water[i]) {
+				DEBUGOUT("Invalid water mark configuration\n");
+				ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
+				goto out;
+			}
+		}
+	}
+
+	/*
+	 * On 82598 having Rx FC on causes resets while doing 1G
+	 * so if it's on turn it off once we know link_speed. For
+	 * more details see 82598 Specification update.
+	 */
+	hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
+	if (link_up && link_speed == IXGBE_LINK_SPEED_1GB_FULL) {
+		switch (hw->fc.requested_mode) {
+		case ixgbe_fc_full:
+			hw->fc.requested_mode = ixgbe_fc_tx_pause;
+			break;
+		case ixgbe_fc_rx_pause:
+			hw->fc.requested_mode = ixgbe_fc_none;
+			break;
+		default:
+			/* no change */
+			break;
+		}
+	}
+
+	/* Negotiate the fc mode to use */
+	ixgbe_fc_autoneg(hw);
+
+	/* Disable any previous flow control settings */
+	fctrl_reg = IXGBE_READ_REG(hw, IXGBE_FCTRL);
+	fctrl_reg &= ~(IXGBE_FCTRL_RFCE | IXGBE_FCTRL_RPFCE);
+
+	rmcs_reg = IXGBE_READ_REG(hw, IXGBE_RMCS);
+	rmcs_reg &= ~(IXGBE_RMCS_TFCE_PRIORITY | IXGBE_RMCS_TFCE_802_3X);
+
+	/*
+	 * The possible values of fc.current_mode are:
+	 * 0: Flow control is completely disabled
+	 * 1: Rx flow control is enabled (we can receive pause frames,
+	 *    but not send pause frames).
+	 * 2: Tx flow control is enabled (we can send pause frames but
+	 *     we do not support receiving pause frames).
+	 * 3: Both Rx and Tx flow control (symmetric) are enabled.
+	 * other: Invalid.
+	 */
+	switch (hw->fc.current_mode) {
+	case ixgbe_fc_none:
+		/*
+		 * Flow control is disabled by software override or autoneg.
+		 * The code below will actually disable it in the HW.
+		 */
+		break;
+	case ixgbe_fc_rx_pause:
+		/*
+		 * Rx Flow control is enabled and Tx Flow control is
+		 * disabled by software override. Since there really
+		 * isn't a way to advertise that we are capable of RX
+		 * Pause ONLY, we will advertise that we support both
+		 * symmetric and asymmetric Rx PAUSE.  Later, we will
+		 * disable the adapter's ability to send PAUSE frames.
+		 */
+		fctrl_reg |= IXGBE_FCTRL_RFCE;
+		break;
+	case ixgbe_fc_tx_pause:
+		/*
+		 * Tx Flow control is enabled, and Rx Flow control is
+		 * disabled by software override.
+		 */
+		rmcs_reg |= IXGBE_RMCS_TFCE_802_3X;
+		break;
+	case ixgbe_fc_full:
+		/* Flow control (both Rx and Tx) is enabled by SW override. */
+		fctrl_reg |= IXGBE_FCTRL_RFCE;
+		rmcs_reg |= IXGBE_RMCS_TFCE_802_3X;
+		break;
+	default:
+		DEBUGOUT("Flow control param set incorrectly\n");
+		ret_val = IXGBE_ERR_CONFIG;
+		goto out;
+		break;
+	}
+
+	/* Set 802.3x based flow control settings. */
+	fctrl_reg |= IXGBE_FCTRL_DPF;
+	IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl_reg);
+	IXGBE_WRITE_REG(hw, IXGBE_RMCS, rmcs_reg);
+
+	/* Set up and enable Rx high/low water mark thresholds, enable XON. */
+	for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) {
+		if ((hw->fc.current_mode & ixgbe_fc_tx_pause) &&
+		    hw->fc.high_water[i]) {
+			fcrtl = (hw->fc.low_water[i] << 10) | IXGBE_FCRTL_XONE;
+			fcrth = (hw->fc.high_water[i] << 10) | IXGBE_FCRTH_FCEN;
+			IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), fcrtl);
+			IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), fcrth);
+		} else {
+			IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), 0);
+			IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), 0);
+		}
+
+	}
+
+	/* Configure pause time (2 TCs per register) */
+	reg = hw->fc.pause_time * 0x00010001;
+	for (i = 0; i < (IXGBE_DCB_MAX_TRAFFIC_CLASS / 2); i++)
+		IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), reg);
+
+	/* Configure flow control refresh threshold value */
+	IXGBE_WRITE_REG(hw, IXGBE_FCRTV, hw->fc.pause_time / 2);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  ixgbe_start_mac_link_82598 - Configures MAC link settings
+ *  @hw: pointer to hardware structure
+ *
+ *  Configures link settings based on values in the ixgbe_hw struct.
+ *  Restarts the link.  Performs autonegotiation if needed.
+ **/
+STATIC s32 ixgbe_start_mac_link_82598(struct ixgbe_hw *hw,
+				      bool autoneg_wait_to_complete)
+{
+	u32 autoc_reg;
+	u32 links_reg;
+	u32 i;
+	s32 status = IXGBE_SUCCESS;
+
+	DEBUGFUNC("ixgbe_start_mac_link_82598");
+
+	/* Restart link */
+	autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	autoc_reg |= IXGBE_AUTOC_AN_RESTART;
+	IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
+
+	/* Only poll for autoneg to complete if specified to do so */
+	if (autoneg_wait_to_complete) {
+		if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
+		     IXGBE_AUTOC_LMS_KX4_AN ||
+		    (autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
+		     IXGBE_AUTOC_LMS_KX4_AN_1G_AN) {
+			links_reg = 0; /* Just in case Autoneg time = 0 */
+			for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) {
+				links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
+				if (links_reg & IXGBE_LINKS_KX_AN_COMP)
+					break;
+				msec_delay(100);
+			}
+			if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) {
+				status = IXGBE_ERR_AUTONEG_NOT_COMPLETE;
+				DEBUGOUT("Autonegotiation did not complete.\n");
+			}
+		}
+	}
+
+	/* Add delay to filter out noises during initial link setup */
+	msec_delay(50);
+
+	return status;
+}
+
+/**
+ *  ixgbe_validate_link_ready - Function looks for phy link
+ *  @hw: pointer to hardware structure
+ *
+ *  Function indicates success when phy link is available. If phy is not ready
+ *  within 5 seconds of MAC indicating link, the function returns error.
+ **/
+STATIC s32 ixgbe_validate_link_ready(struct ixgbe_hw *hw)
+{
+	u32 timeout;
+	u16 an_reg;
+
+	if (hw->device_id != IXGBE_DEV_ID_82598AT2)
+		return IXGBE_SUCCESS;
+
+	for (timeout = 0;
+	     timeout < IXGBE_VALIDATE_LINK_READY_TIMEOUT; timeout++) {
+		hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
+				     IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &an_reg);
+
+		if ((an_reg & IXGBE_MII_AUTONEG_COMPLETE) &&
+		    (an_reg & IXGBE_MII_AUTONEG_LINK_UP))
+			break;
+
+		msec_delay(100);
+	}
+
+	if (timeout == IXGBE_VALIDATE_LINK_READY_TIMEOUT) {
+		DEBUGOUT("Link was indicated but link is down\n");
+		return IXGBE_ERR_LINK_SETUP;
+	}
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_check_mac_link_82598 - Get link/speed status
+ *  @hw: pointer to hardware structure
+ *  @speed: pointer to link speed
+ *  @link_up: true is link is up, false otherwise
+ *  @link_up_wait_to_complete: bool used to wait for link up or not
+ *
+ *  Reads the links register to determine if link is up and the current speed
+ **/
+STATIC s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw,
+				      ixgbe_link_speed *speed, bool *link_up,
+				      bool link_up_wait_to_complete)
+{
+	u32 links_reg;
+	u32 i;
+	u16 link_reg, adapt_comp_reg;
+
+	DEBUGFUNC("ixgbe_check_mac_link_82598");
+
+	/*
+	 * SERDES PHY requires us to read link status from undocumented
+	 * register 0xC79F.  Bit 0 set indicates link is up/ready; clear
+	 * indicates link down.  OxC00C is read to check that the XAUI lanes
+	 * are active.  Bit 0 clear indicates active; set indicates inactive.
+	 */
+	if (hw->phy.type == ixgbe_phy_nl) {
+		hw->phy.ops.read_reg(hw, 0xC79F, IXGBE_TWINAX_DEV, &link_reg);
+		hw->phy.ops.read_reg(hw, 0xC79F, IXGBE_TWINAX_DEV, &link_reg);
+		hw->phy.ops.read_reg(hw, 0xC00C, IXGBE_TWINAX_DEV,
+				     &adapt_comp_reg);
+		if (link_up_wait_to_complete) {
+			for (i = 0; i < hw->mac.max_link_up_time; i++) {
+				if ((link_reg & 1) &&
+				    ((adapt_comp_reg & 1) == 0)) {
+					*link_up = true;
+					break;
+				} else {
+					*link_up = false;
+				}
+				msec_delay(100);
+				hw->phy.ops.read_reg(hw, 0xC79F,
+						     IXGBE_TWINAX_DEV,
+						     &link_reg);
+				hw->phy.ops.read_reg(hw, 0xC00C,
+						     IXGBE_TWINAX_DEV,
+						     &adapt_comp_reg);
+			}
+		} else {
+			if ((link_reg & 1) && ((adapt_comp_reg & 1) == 0))
+				*link_up = true;
+			else
+				*link_up = false;
+		}
+
+		if (*link_up == false)
+			goto out;
+	}
+
+	links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
+	if (link_up_wait_to_complete) {
+		for (i = 0; i < hw->mac.max_link_up_time; i++) {
+			if (links_reg & IXGBE_LINKS_UP) {
+				*link_up = true;
+				break;
+			} else {
+				*link_up = false;
+			}
+			msec_delay(100);
+			links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
+		}
+	} else {
+		if (links_reg & IXGBE_LINKS_UP)
+			*link_up = true;
+		else
+			*link_up = false;
+	}
+
+	if (links_reg & IXGBE_LINKS_SPEED)
+		*speed = IXGBE_LINK_SPEED_10GB_FULL;
+	else
+		*speed = IXGBE_LINK_SPEED_1GB_FULL;
+
+	if ((hw->device_id == IXGBE_DEV_ID_82598AT2) && (*link_up == true) &&
+	    (ixgbe_validate_link_ready(hw) != IXGBE_SUCCESS))
+		*link_up = false;
+
+out:
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_setup_mac_link_82598 - Set MAC link speed
+ *  @hw: pointer to hardware structure
+ *  @speed: new link speed
+ *  @autoneg_wait_to_complete: true when waiting for completion is needed
+ *
+ *  Set the link speed in the AUTOC register and restarts link.
+ **/
+STATIC s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw,
+				      ixgbe_link_speed speed,
+				      bool autoneg_wait_to_complete)
+{
+	bool autoneg = false;
+	s32 status = IXGBE_SUCCESS;
+	ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN;
+	u32 curr_autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	u32 autoc = curr_autoc;
+	u32 link_mode = autoc & IXGBE_AUTOC_LMS_MASK;
+
+	DEBUGFUNC("ixgbe_setup_mac_link_82598");
+
+	/* Check to see if speed passed in is supported. */
+	ixgbe_get_link_capabilities(hw, &link_capabilities, &autoneg);
+	speed &= link_capabilities;
+
+	if (speed == IXGBE_LINK_SPEED_UNKNOWN)
+		status = IXGBE_ERR_LINK_SETUP;
+
+	/* Set KX4/KX support according to speed requested */
+	else if (link_mode == IXGBE_AUTOC_LMS_KX4_AN ||
+		 link_mode == IXGBE_AUTOC_LMS_KX4_AN_1G_AN) {
+		autoc &= ~IXGBE_AUTOC_KX4_KX_SUPP_MASK;
+		if (speed & IXGBE_LINK_SPEED_10GB_FULL)
+			autoc |= IXGBE_AUTOC_KX4_SUPP;
+		if (speed & IXGBE_LINK_SPEED_1GB_FULL)
+			autoc |= IXGBE_AUTOC_KX_SUPP;
+		if (autoc != curr_autoc)
+			IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc);
+	}
+
+	if (status == IXGBE_SUCCESS) {
+		/*
+		 * Setup and restart the link based on the new values in
+		 * ixgbe_hw This will write the AUTOC register based on the new
+		 * stored values
+		 */
+		status = ixgbe_start_mac_link_82598(hw,
+						    autoneg_wait_to_complete);
+	}
+
+	return status;
+}
+
+
+/**
+ *  ixgbe_setup_copper_link_82598 - Set the PHY autoneg advertised field
+ *  @hw: pointer to hardware structure
+ *  @speed: new link speed
+ *  @autoneg_wait_to_complete: true if waiting is needed to complete
+ *
+ *  Sets the link speed in the AUTOC register in the MAC and restarts link.
+ **/
+STATIC s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw,
+					 ixgbe_link_speed speed,
+					 bool autoneg_wait_to_complete)
+{
+	s32 status;
+
+	DEBUGFUNC("ixgbe_setup_copper_link_82598");
+
+	/* Setup the PHY according to input speed */
+	status = hw->phy.ops.setup_link_speed(hw, speed,
+					      autoneg_wait_to_complete);
+	/* Set up MAC */
+	ixgbe_start_mac_link_82598(hw, autoneg_wait_to_complete);
+
+	return status;
+}
+
+/**
+ *  ixgbe_reset_hw_82598 - Performs hardware reset
+ *  @hw: pointer to hardware structure
+ *
+ *  Resets the hardware by resetting the transmit and receive units, masks and
+ *  clears all interrupts, performing a PHY reset, and performing a link (MAC)
+ *  reset.
+ **/
+STATIC s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw)
+{
+	s32 status = IXGBE_SUCCESS;
+	s32 phy_status = IXGBE_SUCCESS;
+	u32 ctrl;
+	u32 gheccr;
+	u32 i;
+	u32 autoc;
+	u8  analog_val;
+
+	DEBUGFUNC("ixgbe_reset_hw_82598");
+
+	/* Call adapter stop to disable tx/rx and clear interrupts */
+	status = hw->mac.ops.stop_adapter(hw);
+	if (status != IXGBE_SUCCESS)
+		goto reset_hw_out;
+
+	/*
+	 * Power up the Atlas Tx lanes if they are currently powered down.
+	 * Atlas Tx lanes are powered down for MAC loopback tests, but
+	 * they are not automatically restored on reset.
+	 */
+	hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, &analog_val);
+	if (analog_val & IXGBE_ATLAS_PDN_TX_REG_EN) {
+		/* Enable Tx Atlas so packets can be transmitted again */
+		hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK,
+					     &analog_val);
+		analog_val &= ~IXGBE_ATLAS_PDN_TX_REG_EN;
+		hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK,
+					      analog_val);
+
+		hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_10G,
+					     &analog_val);
+		analog_val &= ~IXGBE_ATLAS_PDN_TX_10G_QL_ALL;
+		hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_10G,
+					      analog_val);
+
+		hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_1G,
+					     &analog_val);
+		analog_val &= ~IXGBE_ATLAS_PDN_TX_1G_QL_ALL;
+		hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_1G,
+					      analog_val);
+
+		hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_AN,
+					     &analog_val);
+		analog_val &= ~IXGBE_ATLAS_PDN_TX_AN_QL_ALL;
+		hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_AN,
+					      analog_val);
+	}
+
+	/* Reset PHY */
+	if (hw->phy.reset_disable == false) {
+		/* PHY ops must be identified and initialized prior to reset */
+
+		/* Init PHY and function pointers, perform SFP setup */
+		phy_status = hw->phy.ops.init(hw);
+		if (phy_status == IXGBE_ERR_SFP_NOT_SUPPORTED)
+			goto reset_hw_out;
+		if (phy_status == IXGBE_ERR_SFP_NOT_PRESENT)
+			goto mac_reset_top;
+
+		hw->phy.ops.reset(hw);
+	}
+
+mac_reset_top:
+	/*
+	 * Issue global reset to the MAC.  This needs to be a SW reset.
+	 * If link reset is used, it might reset the MAC when mng is using it
+	 */
+	ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL) | IXGBE_CTRL_RST;
+	IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl);
+	IXGBE_WRITE_FLUSH(hw);
+
+	/* Poll for reset bit to self-clear indicating reset is complete */
+	for (i = 0; i < 10; i++) {
+		usec_delay(1);
+		ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
+		if (!(ctrl & IXGBE_CTRL_RST))
+			break;
+	}
+	if (ctrl & IXGBE_CTRL_RST) {
+		status = IXGBE_ERR_RESET_FAILED;
+		DEBUGOUT("Reset polling failed to complete.\n");
+	}
+
+	msec_delay(50);
+
+	/*
+	 * Double resets are required for recovery from certain error
+	 * conditions.  Between resets, it is necessary to stall to allow time
+	 * for any pending HW events to complete.
+	 */
+	if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) {
+		hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
+		goto mac_reset_top;
+	}
+
+	gheccr = IXGBE_READ_REG(hw, IXGBE_GHECCR);
+	gheccr &= ~((1 << 21) | (1 << 18) | (1 << 9) | (1 << 6));
+	IXGBE_WRITE_REG(hw, IXGBE_GHECCR, gheccr);
+
+	/*
+	 * Store the original AUTOC value if it has not been
+	 * stored off yet.  Otherwise restore the stored original
+	 * AUTOC value since the reset operation sets back to deaults.
+	 */
+	autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	if (hw->mac.orig_link_settings_stored == false) {
+		hw->mac.orig_autoc = autoc;
+		hw->mac.orig_link_settings_stored = true;
+	} else if (autoc != hw->mac.orig_autoc) {
+		IXGBE_WRITE_REG(hw, IXGBE_AUTOC, hw->mac.orig_autoc);
+	}
+
+	/* Store the permanent mac address */
+	hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
+
+	/*
+	 * Store MAC address from RAR0, clear receive address registers, and
+	 * clear the multicast table
+	 */
+	hw->mac.ops.init_rx_addrs(hw);
+
+reset_hw_out:
+	if (phy_status != IXGBE_SUCCESS)
+		status = phy_status;
+
+	return status;
+}
+
+/**
+ *  ixgbe_set_vmdq_82598 - Associate a VMDq set index with a rx address
+ *  @hw: pointer to hardware struct
+ *  @rar: receive address register index to associate with a VMDq index
+ *  @vmdq: VMDq set index
+ **/
+s32 ixgbe_set_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
+{
+	u32 rar_high;
+	u32 rar_entries = hw->mac.num_rar_entries;
+
+	DEBUGFUNC("ixgbe_set_vmdq_82598");
+
+	/* Make sure we are using a valid rar index range */
+	if (rar >= rar_entries) {
+		DEBUGOUT1("RAR index %d is out of range.\n", rar);
+		return IXGBE_ERR_INVALID_ARGUMENT;
+	}
+
+	rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar));
+	rar_high &= ~IXGBE_RAH_VIND_MASK;
+	rar_high |= ((vmdq << IXGBE_RAH_VIND_SHIFT) & IXGBE_RAH_VIND_MASK);
+	IXGBE_WRITE_REG(hw, IXGBE_RAH(rar), rar_high);
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_clear_vmdq_82598 - Disassociate a VMDq set index from an rx address
+ *  @hw: pointer to hardware struct
+ *  @rar: receive address register index to associate with a VMDq index
+ *  @vmdq: VMDq clear index (not used in 82598, but elsewhere)
+ **/
+STATIC s32 ixgbe_clear_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
+{
+	u32 rar_high;
+	u32 rar_entries = hw->mac.num_rar_entries;
+
+	UNREFERENCED_1PARAMETER(vmdq);
+
+	/* Make sure we are using a valid rar index range */
+	if (rar >= rar_entries) {
+		DEBUGOUT1("RAR index %d is out of range.\n", rar);
+		return IXGBE_ERR_INVALID_ARGUMENT;
+	}
+
+	rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar));
+	if (rar_high & IXGBE_RAH_VIND_MASK) {
+		rar_high &= ~IXGBE_RAH_VIND_MASK;
+		IXGBE_WRITE_REG(hw, IXGBE_RAH(rar), rar_high);
+	}
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_set_vfta_82598 - Set VLAN filter table
+ *  @hw: pointer to hardware structure
+ *  @vlan: VLAN id to write to VLAN filter
+ *  @vind: VMDq output index that maps queue to VLAN id in VFTA
+ *  @vlan_on: boolean flag to turn on/off VLAN in VFTA
+ *
+ *  Turn on/off specified VLAN in the VLAN filter table.
+ **/
+s32 ixgbe_set_vfta_82598(struct ixgbe_hw *hw, u32 vlan, u32 vind,
+			 bool vlan_on)
+{
+	u32 regindex;
+	u32 bitindex;
+	u32 bits;
+	u32 vftabyte;
+
+	DEBUGFUNC("ixgbe_set_vfta_82598");
+
+	if (vlan > 4095)
+		return IXGBE_ERR_PARAM;
+
+	/* Determine 32-bit word position in array */
+	regindex = (vlan >> 5) & 0x7F;   /* upper seven bits */
+
+	/* Determine the location of the (VMD) queue index */
+	vftabyte =  ((vlan >> 3) & 0x03); /* bits (4:3) indicating byte array */
+	bitindex = (vlan & 0x7) << 2;    /* lower 3 bits indicate nibble */
+
+	/* Set the nibble for VMD queue index */
+	bits = IXGBE_READ_REG(hw, IXGBE_VFTAVIND(vftabyte, regindex));
+	bits &= (~(0x0F << bitindex));
+	bits |= (vind << bitindex);
+	IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vftabyte, regindex), bits);
+
+	/* Determine the location of the bit for this VLAN id */
+	bitindex = vlan & 0x1F;   /* lower five bits */
+
+	bits = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex));
+	if (vlan_on)
+		/* Turn on this VLAN id */
+		bits |= (1 << bitindex);
+	else
+		/* Turn off this VLAN id */
+		bits &= ~(1 << bitindex);
+	IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), bits);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_clear_vfta_82598 - Clear VLAN filter table
+ *  @hw: pointer to hardware structure
+ *
+ *  Clears the VLAN filer table, and the VMDq index associated with the filter
+ **/
+STATIC s32 ixgbe_clear_vfta_82598(struct ixgbe_hw *hw)
+{
+	u32 offset;
+	u32 vlanbyte;
+
+	DEBUGFUNC("ixgbe_clear_vfta_82598");
+
+	for (offset = 0; offset < hw->mac.vft_size; offset++)
+		IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0);
+
+	for (vlanbyte = 0; vlanbyte < 4; vlanbyte++)
+		for (offset = 0; offset < hw->mac.vft_size; offset++)
+			IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vlanbyte, offset),
+					0);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_read_analog_reg8_82598 - Reads 8 bit Atlas analog register
+ *  @hw: pointer to hardware structure
+ *  @reg: analog register to read
+ *  @val: read value
+ *
+ *  Performs read operation to Atlas analog register specified.
+ **/
+s32 ixgbe_read_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 *val)
+{
+	u32  atlas_ctl;
+
+	DEBUGFUNC("ixgbe_read_analog_reg8_82598");
+
+	IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL,
+			IXGBE_ATLASCTL_WRITE_CMD | (reg << 8));
+	IXGBE_WRITE_FLUSH(hw);
+	usec_delay(10);
+	atlas_ctl = IXGBE_READ_REG(hw, IXGBE_ATLASCTL);
+	*val = (u8)atlas_ctl;
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_write_analog_reg8_82598 - Writes 8 bit Atlas analog register
+ *  @hw: pointer to hardware structure
+ *  @reg: atlas register to write
+ *  @val: value to write
+ *
+ *  Performs write operation to Atlas analog register specified.
+ **/
+s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val)
+{
+	u32  atlas_ctl;
+
+	DEBUGFUNC("ixgbe_write_analog_reg8_82598");
+
+	atlas_ctl = (reg << 8) | val;
+	IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL, atlas_ctl);
+	IXGBE_WRITE_FLUSH(hw);
+	usec_delay(10);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_read_i2c_phy_82598 - Reads 8 bit word over I2C interface.
+ *  @hw: pointer to hardware structure
+ *  @dev_addr: address to read from
+ *  @byte_offset: byte offset to read from dev_addr
+ *  @eeprom_data: value read
+ *
+ *  Performs 8 byte read operation to SFP module's EEPROM over I2C interface.
+ **/
+STATIC s32 ixgbe_read_i2c_phy_82598(struct ixgbe_hw *hw, u8 dev_addr,
+				    u8 byte_offset, u8 *eeprom_data)
+{
+	s32 status = IXGBE_SUCCESS;
+	u16 sfp_addr = 0;
+	u16 sfp_data = 0;
+	u16 sfp_stat = 0;
+	u16 gssr;
+	u32 i;
+
+	DEBUGFUNC("ixgbe_read_i2c_phy_82598");
+
+	if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)
+		gssr = IXGBE_GSSR_PHY1_SM;
+	else
+		gssr = IXGBE_GSSR_PHY0_SM;
+
+	if (hw->mac.ops.acquire_swfw_sync(hw, gssr) != IXGBE_SUCCESS)
+		return IXGBE_ERR_SWFW_SYNC;
+
+	if (hw->phy.type == ixgbe_phy_nl) {
+		/*
+		 * NetLogic phy SDA/SCL registers are at addresses 0xC30A to
+		 * 0xC30D. These registers are used to talk to the SFP+
+		 * module's EEPROM through the SDA/SCL (I2C) interface.
+		 */
+		sfp_addr = (dev_addr << 8) + byte_offset;
+		sfp_addr = (sfp_addr | IXGBE_I2C_EEPROM_READ_MASK);
+		hw->phy.ops.write_reg_mdi(hw,
+					  IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR,
+					  IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+					  sfp_addr);
+
+		/* Poll status */
+		for (i = 0; i < 100; i++) {
+			hw->phy.ops.read_reg_mdi(hw,
+						IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT,
+						IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+						&sfp_stat);
+			sfp_stat = sfp_stat & IXGBE_I2C_EEPROM_STATUS_MASK;
+			if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS)
+				break;
+			msec_delay(10);
+		}
+
+		if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_PASS) {
+			DEBUGOUT("EEPROM read did not pass.\n");
+			status = IXGBE_ERR_SFP_NOT_PRESENT;
+			goto out;
+		}
+
+		/* Read data */
+		hw->phy.ops.read_reg_mdi(hw, IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA,
+					IXGBE_MDIO_PMA_PMD_DEV_TYPE, &sfp_data);
+
+		*eeprom_data = (u8)(sfp_data >> 8);
+	} else {
+		status = IXGBE_ERR_PHY;
+	}
+
+out:
+	hw->mac.ops.release_swfw_sync(hw, gssr);
+	return status;
+}
+
+/**
+ *  ixgbe_read_i2c_eeprom_82598 - Reads 8 bit word over I2C interface.
+ *  @hw: pointer to hardware structure
+ *  @byte_offset: EEPROM byte offset to read
+ *  @eeprom_data: value read
+ *
+ *  Performs 8 byte read operation to SFP module's EEPROM over I2C interface.
+ **/
+s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
+				u8 *eeprom_data)
+{
+	return ixgbe_read_i2c_phy_82598(hw, IXGBE_I2C_EEPROM_DEV_ADDR,
+					byte_offset, eeprom_data);
+}
+
+/**
+ *  ixgbe_read_i2c_sff8472_82598 - Reads 8 bit word over I2C interface.
+ *  @hw: pointer to hardware structure
+ *  @byte_offset: byte offset at address 0xA2
+ *  @eeprom_data: value read
+ *
+ *  Performs 8 byte read operation to SFP module's SFF-8472 data over I2C
+ **/
+STATIC s32 ixgbe_read_i2c_sff8472_82598(struct ixgbe_hw *hw, u8 byte_offset,
+					u8 *sff8472_data)
+{
+	return ixgbe_read_i2c_phy_82598(hw, IXGBE_I2C_EEPROM_DEV_ADDR2,
+					byte_offset, sff8472_data);
+}
+
+/**
+ *  ixgbe_get_supported_physical_layer_82598 - Returns physical layer type
+ *  @hw: pointer to hardware structure
+ *
+ *  Determines physical layer capabilities of the current configuration.
+ **/
+u32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw)
+{
+	u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+	u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	u32 pma_pmd_10g = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK;
+	u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
+	u16 ext_ability = 0;
+
+	DEBUGFUNC("ixgbe_get_supported_physical_layer_82598");
+
+	hw->phy.ops.identify(hw);
+
+	/* Copper PHY must be checked before AUTOC LMS to determine correct
+	 * physical layer because 10GBase-T PHYs use LMS = KX4/KX */
+	switch (hw->phy.type) {
+	case ixgbe_phy_tn:
+	case ixgbe_phy_cu_unknown:
+		hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_EXT_ABILITY,
+		IXGBE_MDIO_PMA_PMD_DEV_TYPE, &ext_ability);
+		if (ext_ability & IXGBE_MDIO_PHY_10GBASET_ABILITY)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T;
+		if (ext_ability & IXGBE_MDIO_PHY_1000BASET_ABILITY)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T;
+		if (ext_ability & IXGBE_MDIO_PHY_100BASETX_ABILITY)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX;
+		goto out;
+	default:
+		break;
+	}
+
+	switch (autoc & IXGBE_AUTOC_LMS_MASK) {
+	case IXGBE_AUTOC_LMS_1G_AN:
+	case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
+		if (pma_pmd_1g == IXGBE_AUTOC_1G_KX)
+			physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX;
+		else
+			physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_BX;
+		break;
+	case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
+		if (pma_pmd_10g == IXGBE_AUTOC_10G_CX4)
+			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4;
+		else if (pma_pmd_10g == IXGBE_AUTOC_10G_KX4)
+			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
+		else /* XAUI */
+			physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+		break;
+	case IXGBE_AUTOC_LMS_KX4_AN:
+	case IXGBE_AUTOC_LMS_KX4_AN_1G_AN:
+		if (autoc & IXGBE_AUTOC_KX_SUPP)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX;
+		if (autoc & IXGBE_AUTOC_KX4_SUPP)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
+		break;
+	default:
+		break;
+	}
+
+	if (hw->phy.type == ixgbe_phy_nl) {
+		hw->phy.ops.identify_sfp(hw);
+
+		switch (hw->phy.sfp_type) {
+		case ixgbe_sfp_type_da_cu:
+			physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
+			break;
+		case ixgbe_sfp_type_sr:
+			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
+			break;
+		case ixgbe_sfp_type_lr:
+			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
+			break;
+		default:
+			physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+			break;
+		}
+	}
+
+	switch (hw->device_id) {
+	case IXGBE_DEV_ID_82598_DA_DUAL_PORT:
+		physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
+		break;
+	case IXGBE_DEV_ID_82598AF_DUAL_PORT:
+	case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
+	case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM:
+		physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
+		break;
+	case IXGBE_DEV_ID_82598EB_XF_LR:
+		physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
+		break;
+	default:
+		break;
+	}
+
+out:
+	return physical_layer;
+}
+
+/**
+ *  ixgbe_set_lan_id_multi_port_pcie_82598 - Set LAN id for PCIe multiple
+ *  port devices.
+ *  @hw: pointer to the HW structure
+ *
+ *  Calls common function and corrects issue with some single port devices
+ *  that enable LAN1 but not LAN0.
+ **/
+void ixgbe_set_lan_id_multi_port_pcie_82598(struct ixgbe_hw *hw)
+{
+	struct ixgbe_bus_info *bus = &hw->bus;
+	u16 pci_gen = 0;
+	u16 pci_ctrl2 = 0;
+
+	DEBUGFUNC("ixgbe_set_lan_id_multi_port_pcie_82598");
+
+	ixgbe_set_lan_id_multi_port_pcie(hw);
+
+	/* check if LAN0 is disabled */
+	hw->eeprom.ops.read(hw, IXGBE_PCIE_GENERAL_PTR, &pci_gen);
+	if ((pci_gen != 0) && (pci_gen != 0xFFFF)) {
+
+		hw->eeprom.ops.read(hw, pci_gen + IXGBE_PCIE_CTRL2, &pci_ctrl2);
+
+		/* if LAN0 is completely disabled force function to 0 */
+		if ((pci_ctrl2 & IXGBE_PCIE_CTRL2_LAN_DISABLE) &&
+		    !(pci_ctrl2 & IXGBE_PCIE_CTRL2_DISABLE_SELECT) &&
+		    !(pci_ctrl2 & IXGBE_PCIE_CTRL2_DUMMY_ENABLE)) {
+
+			bus->func = 0;
+		}
+	}
+}
+
+/**
+ *  ixgbe_enable_relaxed_ordering_82598 - enable relaxed ordering
+ *  @hw: pointer to hardware structure
+ *
+ **/
+void ixgbe_enable_relaxed_ordering_82598(struct ixgbe_hw *hw)
+{
+	u32 regval;
+	u32 i;
+
+	DEBUGFUNC("ixgbe_enable_relaxed_ordering_82598");
+
+	/* Enable relaxed ordering */
+	for (i = 0; ((i < hw->mac.max_tx_queues) &&
+	     (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) {
+		regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i));
+		regval |= IXGBE_DCA_TXCTRL_DESC_WRO_EN;
+		IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(i), regval);
+	}
+
+	for (i = 0; ((i < hw->mac.max_rx_queues) &&
+	     (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) {
+		regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
+		regval |= IXGBE_DCA_RXCTRL_DATA_WRO_EN |
+			  IXGBE_DCA_RXCTRL_HEAD_WRO_EN;
+		IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
+	}
+
+}
+
+/**
+ * ixgbe_set_rxpba_82598 - Initialize RX packet buffer
+ * @hw: pointer to hardware structure
+ * @num_pb: number of packet buffers to allocate
+ * @headroom: reserve n KB of headroom
+ * @strategy: packet buffer allocation strategy
+ **/
+STATIC void ixgbe_set_rxpba_82598(struct ixgbe_hw *hw, int num_pb,
+				  u32 headroom, int strategy)
+{
+	u32 rxpktsize = IXGBE_RXPBSIZE_64KB;
+	u8 i = 0;
+	UNREFERENCED_1PARAMETER(headroom);
+
+	if (!num_pb)
+		return;
+
+	/* Setup Rx packet buffer sizes */
+	switch (strategy) {
+	case PBA_STRATEGY_WEIGHTED:
+		/* Setup the first four at 80KB */
+		rxpktsize = IXGBE_RXPBSIZE_80KB;
+		for (; i < 4; i++)
+			IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize);
+		/* Setup the last four at 48KB...don't re-init i */
+		rxpktsize = IXGBE_RXPBSIZE_48KB;
+		/* Fall Through */
+	case PBA_STRATEGY_EQUAL:
+	default:
+		/* Divide the remaining Rx packet buffer evenly among the TCs */
+		for (; i < IXGBE_MAX_PACKET_BUFFERS; i++)
+			IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize);
+		break;
+	}
+
+	/* Setup Tx packet buffer sizes */
+	for (i = 0; i < IXGBE_MAX_PACKET_BUFFERS; i++)
+		IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), IXGBE_TXPBSIZE_40KB);
+}
+
+/**
+ *  ixgbe_enable_rx_dma_82598 - Enable the Rx DMA unit
+ *  @hw: pointer to hardware structure
+ *  @regval: register value to write to RXCTRL
+ *
+ *  Enables the Rx DMA unit
+ **/
+s32 ixgbe_enable_rx_dma_82598(struct ixgbe_hw *hw, u32 regval)
+{
+	DEBUGFUNC("ixgbe_enable_rx_dma_82598");
+
+	IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, regval);
+
+	return IXGBE_SUCCESS;
+}
diff --git a/drivers/net/ixgbe/base/ixgbe_82598.h b/drivers/net/ixgbe/base/ixgbe_82598.h
new file mode 100644
index 00000000..89dd11a5
--- /dev/null
+++ b/drivers/net/ixgbe/base/ixgbe_82598.h
@@ -0,0 +1,52 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+    this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in the
+    documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+    contributors may be used to endorse or promote products derived from
+    this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#ifndef _IXGBE_82598_H_
+#define _IXGBE_82598_H_
+
+u32 ixgbe_get_pcie_msix_count_82598(struct ixgbe_hw *hw);
+s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw);
+s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw);
+void ixgbe_enable_relaxed_ordering_82598(struct ixgbe_hw *hw);
+s32 ixgbe_set_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq);
+s32 ixgbe_set_vfta_82598(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on);
+s32 ixgbe_read_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 *val);
+s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val);
+s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
+				u8 *eeprom_data);
+u32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw);
+s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw);
+void ixgbe_set_lan_id_multi_port_pcie_82598(struct ixgbe_hw *hw);
+void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw);
+s32 ixgbe_enable_rx_dma_82598(struct ixgbe_hw *hw, u32 regval);
+#endif /* _IXGBE_82598_H_ */
diff --git a/drivers/net/ixgbe/base/ixgbe_82599.c b/drivers/net/ixgbe/base/ixgbe_82599.c
new file mode 100644
index 00000000..154c1f10
--- /dev/null
+++ b/drivers/net/ixgbe/base/ixgbe_82599.c
@@ -0,0 +1,2608 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+    this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in the
+    documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+    contributors may be used to endorse or promote products derived from
+    this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#include "ixgbe_type.h"
+#include "ixgbe_82599.h"
+#include "ixgbe_api.h"
+#include "ixgbe_common.h"
+#include "ixgbe_phy.h"
+
+#define IXGBE_82599_MAX_TX_QUEUES 128
+#define IXGBE_82599_MAX_RX_QUEUES 128
+#define IXGBE_82599_RAR_ENTRIES   128
+#define IXGBE_82599_MC_TBL_SIZE   128
+#define IXGBE_82599_VFT_TBL_SIZE  128
+#define IXGBE_82599_RX_PB_SIZE	  512
+
+STATIC s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw,
+					 ixgbe_link_speed speed,
+					 bool autoneg_wait_to_complete);
+STATIC s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw);
+STATIC s32 ixgbe_read_eeprom_82599(struct ixgbe_hw *hw,
+				   u16 offset, u16 *data);
+STATIC s32 ixgbe_read_eeprom_buffer_82599(struct ixgbe_hw *hw, u16 offset,
+					  u16 words, u16 *data);
+STATIC s32 ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
+					u8 dev_addr, u8 *data);
+STATIC s32 ixgbe_write_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
+					u8 dev_addr, u8 data);
+
+void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw)
+{
+	struct ixgbe_mac_info *mac = &hw->mac;
+
+	DEBUGFUNC("ixgbe_init_mac_link_ops_82599");
+
+	/*
+	 * enable the laser control functions for SFP+ fiber
+	 * and MNG not enabled
+	 */
+	if ((mac->ops.get_media_type(hw) == ixgbe_media_type_fiber) &&
+	    !ixgbe_mng_enabled(hw)) {
+		mac->ops.disable_tx_laser =
+				       ixgbe_disable_tx_laser_multispeed_fiber;
+		mac->ops.enable_tx_laser =
+					ixgbe_enable_tx_laser_multispeed_fiber;
+		mac->ops.flap_tx_laser = ixgbe_flap_tx_laser_multispeed_fiber;
+
+	} else {
+		mac->ops.disable_tx_laser = NULL;
+		mac->ops.enable_tx_laser = NULL;
+		mac->ops.flap_tx_laser = NULL;
+	}
+
+	if (hw->phy.multispeed_fiber) {
+		/* Set up dual speed SFP+ support */
+		mac->ops.setup_link = ixgbe_setup_mac_link_multispeed_fiber;
+		mac->ops.setup_mac_link = ixgbe_setup_mac_link_82599;
+		mac->ops.set_rate_select_speed =
+					       ixgbe_set_hard_rate_select_speed;
+	} else {
+		if ((ixgbe_get_media_type(hw) == ixgbe_media_type_backplane) &&
+		     (hw->phy.smart_speed == ixgbe_smart_speed_auto ||
+		      hw->phy.smart_speed == ixgbe_smart_speed_on) &&
+		      !ixgbe_verify_lesm_fw_enabled_82599(hw)) {
+			mac->ops.setup_link = ixgbe_setup_mac_link_smartspeed;
+		} else {
+			mac->ops.setup_link = ixgbe_setup_mac_link_82599;
+		}
+	}
+}
+
+/**
+ *  ixgbe_init_phy_ops_82599 - PHY/SFP specific init
+ *  @hw: pointer to hardware structure
+ *
+ *  Initialize any function pointers that were not able to be
+ *  set during init_shared_code because the PHY/SFP type was
+ *  not known.  Perform the SFP init if necessary.
+ *
+ **/
+s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw)
+{
+	struct ixgbe_mac_info *mac = &hw->mac;
+	struct ixgbe_phy_info *phy = &hw->phy;
+	s32 ret_val = IXGBE_SUCCESS;
+	u32 esdp;
+
+	DEBUGFUNC("ixgbe_init_phy_ops_82599");
+
+	if (hw->device_id == IXGBE_DEV_ID_82599_QSFP_SF_QP) {
+		/* Store flag indicating I2C bus access control unit. */
+		hw->phy.qsfp_shared_i2c_bus = TRUE;
+
+		/* Initialize access to QSFP+ I2C bus */
+		esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+		esdp |= IXGBE_ESDP_SDP0_DIR;
+		esdp &= ~IXGBE_ESDP_SDP1_DIR;
+		esdp &= ~IXGBE_ESDP_SDP0;
+		esdp &= ~IXGBE_ESDP_SDP0_NATIVE;
+		esdp &= ~IXGBE_ESDP_SDP1_NATIVE;
+		IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+		IXGBE_WRITE_FLUSH(hw);
+
+		phy->ops.read_i2c_byte = ixgbe_read_i2c_byte_82599;
+		phy->ops.write_i2c_byte = ixgbe_write_i2c_byte_82599;
+	}
+	/* Identify the PHY or SFP module */
+	ret_val = phy->ops.identify(hw);
+	if (ret_val == IXGBE_ERR_SFP_NOT_SUPPORTED)
+		goto init_phy_ops_out;
+
+	/* Setup function pointers based on detected SFP module and speeds */
+	ixgbe_init_mac_link_ops_82599(hw);
+	if (hw->phy.sfp_type != ixgbe_sfp_type_unknown)
+		hw->phy.ops.reset = NULL;
+
+	/* If copper media, overwrite with copper function pointers */
+	if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) {
+		mac->ops.setup_link = ixgbe_setup_copper_link_82599;
+		mac->ops.get_link_capabilities =
+				  ixgbe_get_copper_link_capabilities_generic;
+	}
+
+	/* Set necessary function pointers based on PHY type */
+	switch (hw->phy.type) {
+	case ixgbe_phy_tn:
+		phy->ops.setup_link = ixgbe_setup_phy_link_tnx;
+		phy->ops.check_link = ixgbe_check_phy_link_tnx;
+		phy->ops.get_firmware_version =
+			     ixgbe_get_phy_firmware_version_tnx;
+		break;
+	default:
+		break;
+	}
+init_phy_ops_out:
+	return ret_val;
+}
+
+s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw)
+{
+	s32 ret_val = IXGBE_SUCCESS;
+	u16 list_offset, data_offset, data_value;
+
+	DEBUGFUNC("ixgbe_setup_sfp_modules_82599");
+
+	if (hw->phy.sfp_type != ixgbe_sfp_type_unknown) {
+		ixgbe_init_mac_link_ops_82599(hw);
+
+		hw->phy.ops.reset = NULL;
+
+		ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset,
+							      &data_offset);
+		if (ret_val != IXGBE_SUCCESS)
+			goto setup_sfp_out;
+
+		/* PHY config will finish before releasing the semaphore */
+		ret_val = hw->mac.ops.acquire_swfw_sync(hw,
+							IXGBE_GSSR_MAC_CSR_SM);
+		if (ret_val != IXGBE_SUCCESS) {
+			ret_val = IXGBE_ERR_SWFW_SYNC;
+			goto setup_sfp_out;
+		}
+
+		if (hw->eeprom.ops.read(hw, ++data_offset, &data_value))
+			goto setup_sfp_err;
+		while (data_value != 0xffff) {
+			IXGBE_WRITE_REG(hw, IXGBE_CORECTL, data_value);
+			IXGBE_WRITE_FLUSH(hw);
+			if (hw->eeprom.ops.read(hw, ++data_offset, &data_value))
+				goto setup_sfp_err;
+		}
+
+		/* Release the semaphore */
+		hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
+		/* Delay obtaining semaphore again to allow FW access
+		 * prot_autoc_write uses the semaphore too.
+		 */
+		msec_delay(hw->eeprom.semaphore_delay);
+
+		/* Restart DSP and set SFI mode */
+		ret_val = hw->mac.ops.prot_autoc_write(hw,
+			hw->mac.orig_autoc | IXGBE_AUTOC_LMS_10G_SERIAL,
+			false);
+
+		if (ret_val) {
+			DEBUGOUT("sfp module setup not complete\n");
+			ret_val = IXGBE_ERR_SFP_SETUP_NOT_COMPLETE;
+			goto setup_sfp_out;
+		}
+
+	}
+
+setup_sfp_out:
+	return ret_val;
+
+setup_sfp_err:
+	/* Release the semaphore */
+	hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
+	/* Delay obtaining semaphore again to allow FW access */
+	msec_delay(hw->eeprom.semaphore_delay);
+	ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+		      "eeprom read at offset %d failed", data_offset);
+	return IXGBE_ERR_PHY;
+}
+
+/**
+ *  prot_autoc_read_82599 - Hides MAC differences needed for AUTOC read
+ *  @hw: pointer to hardware structure
+ *  @locked: Return the if we locked for this read.
+ *  @reg_val: Value we read from AUTOC
+ *
+ *  For this part (82599) we need to wrap read-modify-writes with a possible
+ *  FW/SW lock.  It is assumed this lock will be freed with the next
+ *  prot_autoc_write_82599().
+ */
+s32 prot_autoc_read_82599(struct ixgbe_hw *hw, bool *locked, u32 *reg_val)
+{
+	s32 ret_val;
+
+	*locked = false;
+	 /* If LESM is on then we need to hold the SW/FW semaphore. */
+	if (ixgbe_verify_lesm_fw_enabled_82599(hw)) {
+		ret_val = hw->mac.ops.acquire_swfw_sync(hw,
+					IXGBE_GSSR_MAC_CSR_SM);
+		if (ret_val != IXGBE_SUCCESS)
+			return IXGBE_ERR_SWFW_SYNC;
+
+		*locked = true;
+	}
+
+	*reg_val = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	return IXGBE_SUCCESS;
+}
+
+/**
+ * prot_autoc_write_82599 - Hides MAC differences needed for AUTOC write
+ * @hw: pointer to hardware structure
+ * @reg_val: value to write to AUTOC
+ * @locked: bool to indicate whether the SW/FW lock was already taken by
+ *           previous proc_autoc_read_82599.
+ *
+ * This part (82599) may need to hold the SW/FW lock around all writes to
+ * AUTOC. Likewise after a write we need to do a pipeline reset.
+ */
+s32 prot_autoc_write_82599(struct ixgbe_hw *hw, u32 autoc, bool locked)
+{
+	s32 ret_val = IXGBE_SUCCESS;
+
+	/* Blocked by MNG FW so bail */
+	if (ixgbe_check_reset_blocked(hw))
+		goto out;
+
+	/* We only need to get the lock if:
+	 *  - We didn't do it already (in the read part of a read-modify-write)
+	 *  - LESM is enabled.
+	 */
+	if (!locked && ixgbe_verify_lesm_fw_enabled_82599(hw)) {
+		ret_val = hw->mac.ops.acquire_swfw_sync(hw,
+					IXGBE_GSSR_MAC_CSR_SM);
+		if (ret_val != IXGBE_SUCCESS)
+			return IXGBE_ERR_SWFW_SYNC;
+
+		locked = true;
+	}
+
+	IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc);
+	ret_val = ixgbe_reset_pipeline_82599(hw);
+
+out:
+	/* Free the SW/FW semaphore as we either grabbed it here or
+	 * already had it when this function was called.
+	 */
+	if (locked)
+		hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_init_ops_82599 - Inits func ptrs and MAC type
+ *  @hw: pointer to hardware structure
+ *
+ *  Initialize the function pointers and assign the MAC type for 82599.
+ *  Does not touch the hardware.
+ **/
+
+s32 ixgbe_init_ops_82599(struct ixgbe_hw *hw)
+{
+	struct ixgbe_mac_info *mac = &hw->mac;
+	struct ixgbe_phy_info *phy = &hw->phy;
+	struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+	s32 ret_val;
+
+	DEBUGFUNC("ixgbe_init_ops_82599");
+
+	ixgbe_init_phy_ops_generic(hw);
+	ret_val = ixgbe_init_ops_generic(hw);
+
+	/* PHY */
+	phy->ops.identify = ixgbe_identify_phy_82599;
+	phy->ops.init = ixgbe_init_phy_ops_82599;
+
+	/* MAC */
+	mac->ops.reset_hw = ixgbe_reset_hw_82599;
+	mac->ops.enable_relaxed_ordering = ixgbe_enable_relaxed_ordering_gen2;
+	mac->ops.get_media_type = ixgbe_get_media_type_82599;
+	mac->ops.get_supported_physical_layer =
+				    ixgbe_get_supported_physical_layer_82599;
+	mac->ops.disable_sec_rx_path = ixgbe_disable_sec_rx_path_generic;
+	mac->ops.enable_sec_rx_path = ixgbe_enable_sec_rx_path_generic;
+	mac->ops.enable_rx_dma = ixgbe_enable_rx_dma_82599;
+	mac->ops.read_analog_reg8 = ixgbe_read_analog_reg8_82599;
+	mac->ops.write_analog_reg8 = ixgbe_write_analog_reg8_82599;
+	mac->ops.start_hw = ixgbe_start_hw_82599;
+	mac->ops.get_san_mac_addr = ixgbe_get_san_mac_addr_generic;
+	mac->ops.set_san_mac_addr = ixgbe_set_san_mac_addr_generic;
+	mac->ops.get_device_caps = ixgbe_get_device_caps_generic;
+	mac->ops.get_wwn_prefix = ixgbe_get_wwn_prefix_generic;
+	mac->ops.get_fcoe_boot_status = ixgbe_get_fcoe_boot_status_generic;
+	mac->ops.prot_autoc_read = prot_autoc_read_82599;
+	mac->ops.prot_autoc_write = prot_autoc_write_82599;
+
+	/* RAR, Multicast, VLAN */
+	mac->ops.set_vmdq = ixgbe_set_vmdq_generic;
+	mac->ops.set_vmdq_san_mac = ixgbe_set_vmdq_san_mac_generic;
+	mac->ops.clear_vmdq = ixgbe_clear_vmdq_generic;
+	mac->ops.insert_mac_addr = ixgbe_insert_mac_addr_generic;
+	mac->rar_highwater = 1;
+	mac->ops.set_vfta = ixgbe_set_vfta_generic;
+	mac->ops.set_vlvf = ixgbe_set_vlvf_generic;
+	mac->ops.clear_vfta = ixgbe_clear_vfta_generic;
+	mac->ops.init_uta_tables = ixgbe_init_uta_tables_generic;
+	mac->ops.setup_sfp = ixgbe_setup_sfp_modules_82599;
+	mac->ops.set_mac_anti_spoofing = ixgbe_set_mac_anti_spoofing;
+	mac->ops.set_vlan_anti_spoofing = ixgbe_set_vlan_anti_spoofing;
+
+	/* Link */
+	mac->ops.get_link_capabilities = ixgbe_get_link_capabilities_82599;
+	mac->ops.check_link = ixgbe_check_mac_link_generic;
+	mac->ops.setup_rxpba = ixgbe_set_rxpba_generic;
+	ixgbe_init_mac_link_ops_82599(hw);
+
+	mac->mcft_size		= IXGBE_82599_MC_TBL_SIZE;
+	mac->vft_size		= IXGBE_82599_VFT_TBL_SIZE;
+	mac->num_rar_entries	= IXGBE_82599_RAR_ENTRIES;
+	mac->rx_pb_size		= IXGBE_82599_RX_PB_SIZE;
+	mac->max_rx_queues	= IXGBE_82599_MAX_RX_QUEUES;
+	mac->max_tx_queues	= IXGBE_82599_MAX_TX_QUEUES;
+	mac->max_msix_vectors	= ixgbe_get_pcie_msix_count_generic(hw);
+
+	mac->arc_subsystem_valid = !!(IXGBE_READ_REG(hw, IXGBE_FWSM_BY_MAC(hw))
+				      & IXGBE_FWSM_MODE_MASK);
+
+	hw->mbx.ops.init_params = ixgbe_init_mbx_params_pf;
+
+	/* EEPROM */
+	eeprom->ops.read = ixgbe_read_eeprom_82599;
+	eeprom->ops.read_buffer = ixgbe_read_eeprom_buffer_82599;
+
+	/* Manageability interface */
+	mac->ops.set_fw_drv_ver = ixgbe_set_fw_drv_ver_generic;
+
+	mac->ops.get_thermal_sensor_data =
+					 ixgbe_get_thermal_sensor_data_generic;
+	mac->ops.init_thermal_sensor_thresh =
+				      ixgbe_init_thermal_sensor_thresh_generic;
+
+	mac->ops.get_rtrup2tc = ixgbe_dcb_get_rtrup2tc_generic;
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_get_link_capabilities_82599 - Determines link capabilities
+ *  @hw: pointer to hardware structure
+ *  @speed: pointer to link speed
+ *  @autoneg: true when autoneg or autotry is enabled
+ *
+ *  Determines the link capabilities by reading the AUTOC register.
+ **/
+s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw,
+				      ixgbe_link_speed *speed,
+				      bool *autoneg)
+{
+	s32 status = IXGBE_SUCCESS;
+	u32 autoc = 0;
+
+	DEBUGFUNC("ixgbe_get_link_capabilities_82599");
+
+
+	/* Check if 1G SFP module. */
+	if (hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
+	    hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
+	    hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
+	    hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 ||
+	    hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
+	    hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1) {
+		*speed = IXGBE_LINK_SPEED_1GB_FULL;
+		*autoneg = true;
+		goto out;
+	}
+
+	/*
+	 * Determine link capabilities based on the stored value of AUTOC,
+	 * which represents EEPROM defaults.  If AUTOC value has not
+	 * been stored, use the current register values.
+	 */
+	if (hw->mac.orig_link_settings_stored)
+		autoc = hw->mac.orig_autoc;
+	else
+		autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+
+	switch (autoc & IXGBE_AUTOC_LMS_MASK) {
+	case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
+		*speed = IXGBE_LINK_SPEED_1GB_FULL;
+		*autoneg = false;
+		break;
+
+	case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
+		*speed = IXGBE_LINK_SPEED_10GB_FULL;
+		*autoneg = false;
+		break;
+
+	case IXGBE_AUTOC_LMS_1G_AN:
+		*speed = IXGBE_LINK_SPEED_1GB_FULL;
+		*autoneg = true;
+		break;
+
+	case IXGBE_AUTOC_LMS_10G_SERIAL:
+		*speed = IXGBE_LINK_SPEED_10GB_FULL;
+		*autoneg = false;
+		break;
+
+	case IXGBE_AUTOC_LMS_KX4_KX_KR:
+	case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN:
+		*speed = IXGBE_LINK_SPEED_UNKNOWN;
+		if (autoc & IXGBE_AUTOC_KR_SUPP)
+			*speed |= IXGBE_LINK_SPEED_10GB_FULL;
+		if (autoc & IXGBE_AUTOC_KX4_SUPP)
+			*speed |= IXGBE_LINK_SPEED_10GB_FULL;
+		if (autoc & IXGBE_AUTOC_KX_SUPP)
+			*speed |= IXGBE_LINK_SPEED_1GB_FULL;
+		*autoneg = true;
+		break;
+
+	case IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII:
+		*speed = IXGBE_LINK_SPEED_100_FULL;
+		if (autoc & IXGBE_AUTOC_KR_SUPP)
+			*speed |= IXGBE_LINK_SPEED_10GB_FULL;
+		if (autoc & IXGBE_AUTOC_KX4_SUPP)
+			*speed |= IXGBE_LINK_SPEED_10GB_FULL;
+		if (autoc & IXGBE_AUTOC_KX_SUPP)
+			*speed |= IXGBE_LINK_SPEED_1GB_FULL;
+		*autoneg = true;
+		break;
+
+	case IXGBE_AUTOC_LMS_SGMII_1G_100M:
+		*speed = IXGBE_LINK_SPEED_1GB_FULL | IXGBE_LINK_SPEED_100_FULL;
+		*autoneg = false;
+		break;
+
+	default:
+		status = IXGBE_ERR_LINK_SETUP;
+		goto out;
+		break;
+	}
+
+	if (hw->phy.multispeed_fiber) {
+		*speed |= IXGBE_LINK_SPEED_10GB_FULL |
+			  IXGBE_LINK_SPEED_1GB_FULL;
+
+		/* QSFP must not enable full auto-negotiation
+		 * Limited autoneg is enabled at 1G
+		 */
+		if (hw->phy.media_type == ixgbe_media_type_fiber_qsfp)
+			*autoneg = false;
+		else
+			*autoneg = true;
+	}
+
+out:
+	return status;
+}
+
+/**
+ *  ixgbe_get_media_type_82599 - Get media type
+ *  @hw: pointer to hardware structure
+ *
+ *  Returns the media type (fiber, copper, backplane)
+ **/
+enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw)
+{
+	enum ixgbe_media_type media_type;
+
+	DEBUGFUNC("ixgbe_get_media_type_82599");
+
+	/* Detect if there is a copper PHY attached. */
+	switch (hw->phy.type) {
+	case ixgbe_phy_cu_unknown:
+	case ixgbe_phy_tn:
+		media_type = ixgbe_media_type_copper;
+		goto out;
+	default:
+		break;
+	}
+
+	switch (hw->device_id) {
+	case IXGBE_DEV_ID_82599_KX4:
+	case IXGBE_DEV_ID_82599_KX4_MEZZ:
+	case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
+	case IXGBE_DEV_ID_82599_KR:
+	case IXGBE_DEV_ID_82599_BACKPLANE_FCOE:
+	case IXGBE_DEV_ID_82599_XAUI_LOM:
+		/* Default device ID is mezzanine card KX/KX4 */
+		media_type = ixgbe_media_type_backplane;
+		break;
+	case IXGBE_DEV_ID_82599_SFP:
+	case IXGBE_DEV_ID_82599_SFP_FCOE:
+	case IXGBE_DEV_ID_82599_SFP_EM:
+	case IXGBE_DEV_ID_82599_SFP_SF2:
+	case IXGBE_DEV_ID_82599_SFP_SF_QP:
+	case IXGBE_DEV_ID_82599EN_SFP:
+		media_type = ixgbe_media_type_fiber;
+		break;
+	case IXGBE_DEV_ID_82599_CX4:
+		media_type = ixgbe_media_type_cx4;
+		break;
+	case IXGBE_DEV_ID_82599_T3_LOM:
+		media_type = ixgbe_media_type_copper;
+		break;
+	case IXGBE_DEV_ID_82599_LS:
+		media_type = ixgbe_media_type_fiber_lco;
+		break;
+	case IXGBE_DEV_ID_82599_QSFP_SF_QP:
+		media_type = ixgbe_media_type_fiber_qsfp;
+		break;
+	default:
+		media_type = ixgbe_media_type_unknown;
+		break;
+	}
+out:
+	return media_type;
+}
+
+/**
+ *  ixgbe_stop_mac_link_on_d3_82599 - Disables link on D3
+ *  @hw: pointer to hardware structure
+ *
+ *  Disables link during D3 power down sequence.
+ *
+ **/
+void ixgbe_stop_mac_link_on_d3_82599(struct ixgbe_hw *hw)
+{
+	u32 autoc2_reg;
+	u16 ee_ctrl_2 = 0;
+
+	DEBUGFUNC("ixgbe_stop_mac_link_on_d3_82599");
+	ixgbe_read_eeprom(hw, IXGBE_EEPROM_CTRL_2, &ee_ctrl_2);
+
+	if (!ixgbe_mng_present(hw) && !hw->wol_enabled &&
+	    ee_ctrl_2 & IXGBE_EEPROM_CCD_BIT) {
+		autoc2_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
+		autoc2_reg |= IXGBE_AUTOC2_LINK_DISABLE_ON_D3_MASK;
+		IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2_reg);
+	}
+}
+
+/**
+ *  ixgbe_start_mac_link_82599 - Setup MAC link settings
+ *  @hw: pointer to hardware structure
+ *  @autoneg_wait_to_complete: true when waiting for completion is needed
+ *
+ *  Configures link settings based on values in the ixgbe_hw struct.
+ *  Restarts the link.  Performs autonegotiation if needed.
+ **/
+s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw,
+			       bool autoneg_wait_to_complete)
+{
+	u32 autoc_reg;
+	u32 links_reg;
+	u32 i;
+	s32 status = IXGBE_SUCCESS;
+	bool got_lock = false;
+
+	DEBUGFUNC("ixgbe_start_mac_link_82599");
+
+
+	/*  reset_pipeline requires us to hold this lock as it writes to
+	 *  AUTOC.
+	 */
+	if (ixgbe_verify_lesm_fw_enabled_82599(hw)) {
+		status = hw->mac.ops.acquire_swfw_sync(hw,
+						       IXGBE_GSSR_MAC_CSR_SM);
+		if (status != IXGBE_SUCCESS)
+			goto out;
+
+		got_lock = true;
+	}
+
+	/* Restart link */
+	ixgbe_reset_pipeline_82599(hw);
+
+	if (got_lock)
+		hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
+
+	/* Only poll for autoneg to complete if specified to do so */
+	if (autoneg_wait_to_complete) {
+		autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+		if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
+		     IXGBE_AUTOC_LMS_KX4_KX_KR ||
+		    (autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
+		     IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN ||
+		    (autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
+		     IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) {
+			links_reg = 0; /* Just in case Autoneg time = 0 */
+			for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) {
+				links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
+				if (links_reg & IXGBE_LINKS_KX_AN_COMP)
+					break;
+				msec_delay(100);
+			}
+			if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) {
+				status = IXGBE_ERR_AUTONEG_NOT_COMPLETE;
+				DEBUGOUT("Autoneg did not complete.\n");
+			}
+		}
+	}
+
+	/* Add delay to filter out noises during initial link setup */
+	msec_delay(50);
+
+out:
+	return status;
+}
+
+/**
+ *  ixgbe_disable_tx_laser_multispeed_fiber - Disable Tx laser
+ *  @hw: pointer to hardware structure
+ *
+ *  The base drivers may require better control over SFP+ module
+ *  PHY states.  This includes selectively shutting down the Tx
+ *  laser on the PHY, effectively halting physical link.
+ **/
+void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
+{
+	u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
+
+	/* Blocked by MNG FW so bail */
+	if (ixgbe_check_reset_blocked(hw))
+		return;
+
+	/* Disable Tx laser; allow 100us to go dark per spec */
+	esdp_reg |= IXGBE_ESDP_SDP3;
+	IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+	IXGBE_WRITE_FLUSH(hw);
+	usec_delay(100);
+}
+
+/**
+ *  ixgbe_enable_tx_laser_multispeed_fiber - Enable Tx laser
+ *  @hw: pointer to hardware structure
+ *
+ *  The base drivers may require better control over SFP+ module
+ *  PHY states.  This includes selectively turning on the Tx
+ *  laser on the PHY, effectively starting physical link.
+ **/
+void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
+{
+	u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
+
+	/* Enable Tx laser; allow 100ms to light up */
+	esdp_reg &= ~IXGBE_ESDP_SDP3;
+	IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+	IXGBE_WRITE_FLUSH(hw);
+	msec_delay(100);
+}
+
+/**
+ *  ixgbe_flap_tx_laser_multispeed_fiber - Flap Tx laser
+ *  @hw: pointer to hardware structure
+ *
+ *  When the driver changes the link speeds that it can support,
+ *  it sets autotry_restart to true to indicate that we need to
+ *  initiate a new autotry session with the link partner.  To do
+ *  so, we set the speed then disable and re-enable the Tx laser, to
+ *  alert the link partner that it also needs to restart autotry on its
+ *  end.  This is consistent with true clause 37 autoneg, which also
+ *  involves a loss of signal.
+ **/
+void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
+{
+	DEBUGFUNC("ixgbe_flap_tx_laser_multispeed_fiber");
+
+	/* Blocked by MNG FW so bail */
+	if (ixgbe_check_reset_blocked(hw))
+		return;
+
+	if (hw->mac.autotry_restart) {
+		ixgbe_disable_tx_laser_multispeed_fiber(hw);
+		ixgbe_enable_tx_laser_multispeed_fiber(hw);
+		hw->mac.autotry_restart = false;
+	}
+}
+
+/**
+ *  ixgbe_set_hard_rate_select_speed - Set module link speed
+ *  @hw: pointer to hardware structure
+ *  @speed: link speed to set
+ *
+ *  Set module link speed via RS0/RS1 rate select pins.
+ */
+void ixgbe_set_hard_rate_select_speed(struct ixgbe_hw *hw,
+					ixgbe_link_speed speed)
+{
+	u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
+
+	switch (speed) {
+	case IXGBE_LINK_SPEED_10GB_FULL:
+		esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5);
+		break;
+	case IXGBE_LINK_SPEED_1GB_FULL:
+		esdp_reg &= ~IXGBE_ESDP_SDP5;
+		esdp_reg |= IXGBE_ESDP_SDP5_DIR;
+		break;
+	default:
+		DEBUGOUT("Invalid fixed module speed\n");
+		return;
+	}
+
+	IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+	IXGBE_WRITE_FLUSH(hw);
+}
+
+/**
+ *  ixgbe_setup_mac_link_smartspeed - Set MAC link speed using SmartSpeed
+ *  @hw: pointer to hardware structure
+ *  @speed: new link speed
+ *  @autoneg_wait_to_complete: true when waiting for completion is needed
+ *
+ *  Implements the Intel SmartSpeed algorithm.
+ **/
+s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
+				    ixgbe_link_speed speed,
+				    bool autoneg_wait_to_complete)
+{
+	s32 status = IXGBE_SUCCESS;
+	ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN;
+	s32 i, j;
+	bool link_up = false;
+	u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+
+	DEBUGFUNC("ixgbe_setup_mac_link_smartspeed");
+
+	 /* Set autoneg_advertised value based on input link speed */
+	hw->phy.autoneg_advertised = 0;
+
+	if (speed & IXGBE_LINK_SPEED_10GB_FULL)
+		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
+
+	if (speed & IXGBE_LINK_SPEED_1GB_FULL)
+		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
+
+	if (speed & IXGBE_LINK_SPEED_100_FULL)
+		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_100_FULL;
+
+	/*
+	 * Implement Intel SmartSpeed algorithm.  SmartSpeed will reduce the
+	 * autoneg advertisement if link is unable to be established at the
+	 * highest negotiated rate.  This can sometimes happen due to integrity
+	 * issues with the physical media connection.
+	 */
+
+	/* First, try to get link with full advertisement */
+	hw->phy.smart_speed_active = false;
+	for (j = 0; j < IXGBE_SMARTSPEED_MAX_RETRIES; j++) {
+		status = ixgbe_setup_mac_link_82599(hw, speed,
+						    autoneg_wait_to_complete);
+		if (status != IXGBE_SUCCESS)
+			goto out;
+
+		/*
+		 * Wait for the controller to acquire link.  Per IEEE 802.3ap,
+		 * Section 73.10.2, we may have to wait up to 500ms if KR is
+		 * attempted, or 200ms if KX/KX4/BX/BX4 is attempted, per
+		 * Table 9 in the AN MAS.
+		 */
+		for (i = 0; i < 5; i++) {
+			msec_delay(100);
+
+			/* If we have link, just jump out */
+			status = ixgbe_check_link(hw, &link_speed, &link_up,
+						  false);
+			if (status != IXGBE_SUCCESS)
+				goto out;
+
+			if (link_up)
+				goto out;
+		}
+	}
+
+	/*
+	 * We didn't get link.  If we advertised KR plus one of KX4/KX
+	 * (or BX4/BX), then disable KR and try again.
+	 */
+	if (((autoc_reg & IXGBE_AUTOC_KR_SUPP) == 0) ||
+	    ((autoc_reg & IXGBE_AUTOC_KX4_KX_SUPP_MASK) == 0))
+		goto out;
+
+	/* Turn SmartSpeed on to disable KR support */
+	hw->phy.smart_speed_active = true;
+	status = ixgbe_setup_mac_link_82599(hw, speed,
+					    autoneg_wait_to_complete);
+	if (status != IXGBE_SUCCESS)
+		goto out;
+
+	/*
+	 * Wait for the controller to acquire link.  600ms will allow for
+	 * the AN link_fail_inhibit_timer as well for multiple cycles of
+	 * parallel detect, both 10g and 1g. This allows for the maximum
+	 * connect attempts as defined in the AN MAS table 73-7.
+	 */
+	for (i = 0; i < 6; i++) {
+		msec_delay(100);
+
+		/* If we have link, just jump out */
+		status = ixgbe_check_link(hw, &link_speed, &link_up, false);
+		if (status != IXGBE_SUCCESS)
+			goto out;
+
+		if (link_up)
+			goto out;
+	}
+
+	/* We didn't get link.  Turn SmartSpeed back off. */
+	hw->phy.smart_speed_active = false;
+	status = ixgbe_setup_mac_link_82599(hw, speed,
+					    autoneg_wait_to_complete);
+
+out:
+	if (link_up && (link_speed == IXGBE_LINK_SPEED_1GB_FULL))
+		DEBUGOUT("Smartspeed has downgraded the link speed "
+		"from the maximum advertised\n");
+	return status;
+}
+
+/**
+ *  ixgbe_setup_mac_link_82599 - Set MAC link speed
+ *  @hw: pointer to hardware structure
+ *  @speed: new link speed
+ *  @autoneg_wait_to_complete: true when waiting for completion is needed
+ *
+ *  Set the link speed in the AUTOC register and restarts link.
+ **/
+s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw,
+			       ixgbe_link_speed speed,
+			       bool autoneg_wait_to_complete)
+{
+	bool autoneg = false;
+	s32 status = IXGBE_SUCCESS;
+	u32 pma_pmd_1g, link_mode;
+	u32 current_autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); /* holds the value of AUTOC register at this current point in time */
+	u32 orig_autoc = 0; /* holds the cached value of AUTOC register */
+	u32 autoc = current_autoc; /* Temporary variable used for comparison purposes */
+	u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
+	u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK;
+	u32 links_reg;
+	u32 i;
+	ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN;
+
+	DEBUGFUNC("ixgbe_setup_mac_link_82599");
+
+	/* Check to see if speed passed in is supported. */
+	status = ixgbe_get_link_capabilities(hw, &link_capabilities, &autoneg);
+	if (status)
+		goto out;
+
+	speed &= link_capabilities;
+
+	if (speed == IXGBE_LINK_SPEED_UNKNOWN) {
+		status = IXGBE_ERR_LINK_SETUP;
+		goto out;
+	}
+
+	/* Use stored value (EEPROM defaults) of AUTOC to find KR/KX4 support*/
+	if (hw->mac.orig_link_settings_stored)
+		orig_autoc = hw->mac.orig_autoc;
+	else
+		orig_autoc = autoc;
+
+	link_mode = autoc & IXGBE_AUTOC_LMS_MASK;
+	pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
+
+	if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR ||
+	    link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN ||
+	    link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) {
+		/* Set KX4/KX/KR support according to speed requested */
+		autoc &= ~(IXGBE_AUTOC_KX4_KX_SUPP_MASK | IXGBE_AUTOC_KR_SUPP);
+		if (speed & IXGBE_LINK_SPEED_10GB_FULL) {
+			if (orig_autoc & IXGBE_AUTOC_KX4_SUPP)
+				autoc |= IXGBE_AUTOC_KX4_SUPP;
+			if ((orig_autoc & IXGBE_AUTOC_KR_SUPP) &&
+			    (hw->phy.smart_speed_active == false))
+				autoc |= IXGBE_AUTOC_KR_SUPP;
+		}
+		if (speed & IXGBE_LINK_SPEED_1GB_FULL)
+			autoc |= IXGBE_AUTOC_KX_SUPP;
+	} else if ((pma_pmd_1g == IXGBE_AUTOC_1G_SFI) &&
+		   (link_mode == IXGBE_AUTOC_LMS_1G_LINK_NO_AN ||
+		    link_mode == IXGBE_AUTOC_LMS_1G_AN)) {
+		/* Switch from 1G SFI to 10G SFI if requested */
+		if ((speed == IXGBE_LINK_SPEED_10GB_FULL) &&
+		    (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI)) {
+			autoc &= ~IXGBE_AUTOC_LMS_MASK;
+			autoc |= IXGBE_AUTOC_LMS_10G_SERIAL;
+		}
+	} else if ((pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI) &&
+		   (link_mode == IXGBE_AUTOC_LMS_10G_SERIAL)) {
+		/* Switch from 10G SFI to 1G SFI if requested */
+		if ((speed == IXGBE_LINK_SPEED_1GB_FULL) &&
+		    (pma_pmd_1g == IXGBE_AUTOC_1G_SFI)) {
+			autoc &= ~IXGBE_AUTOC_LMS_MASK;
+			if (autoneg || hw->phy.type == ixgbe_phy_qsfp_intel)
+				autoc |= IXGBE_AUTOC_LMS_1G_AN;
+			else
+				autoc |= IXGBE_AUTOC_LMS_1G_LINK_NO_AN;
+		}
+	}
+
+	if (autoc != current_autoc) {
+		/* Restart link */
+		status = hw->mac.ops.prot_autoc_write(hw, autoc, false);
+		if (status != IXGBE_SUCCESS)
+			goto out;
+
+		/* Only poll for autoneg to complete if specified to do so */
+		if (autoneg_wait_to_complete) {
+			if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR ||
+			    link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN ||
+			    link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) {
+				links_reg = 0; /*Just in case Autoneg time=0*/
+				for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) {
+					links_reg =
+					       IXGBE_READ_REG(hw, IXGBE_LINKS);
+					if (links_reg & IXGBE_LINKS_KX_AN_COMP)
+						break;
+					msec_delay(100);
+				}
+				if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) {
+					status =
+						IXGBE_ERR_AUTONEG_NOT_COMPLETE;
+					DEBUGOUT("Autoneg did not complete.\n");
+				}
+			}
+		}
+
+		/* Add delay to filter out noises during initial link setup */
+		msec_delay(50);
+	}
+
+out:
+	return status;
+}
+
+/**
+ *  ixgbe_setup_copper_link_82599 - Set the PHY autoneg advertised field
+ *  @hw: pointer to hardware structure
+ *  @speed: new link speed
+ *  @autoneg_wait_to_complete: true if waiting is needed to complete
+ *
+ *  Restarts link on PHY and MAC based on settings passed in.
+ **/
+STATIC s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw,
+					 ixgbe_link_speed speed,
+					 bool autoneg_wait_to_complete)
+{
+	s32 status;
+
+	DEBUGFUNC("ixgbe_setup_copper_link_82599");
+
+	/* Setup the PHY according to input speed */
+	status = hw->phy.ops.setup_link_speed(hw, speed,
+					      autoneg_wait_to_complete);
+	/* Set up MAC */
+	ixgbe_start_mac_link_82599(hw, autoneg_wait_to_complete);
+
+	return status;
+}
+
+/**
+ *  ixgbe_reset_hw_82599 - Perform hardware reset
+ *  @hw: pointer to hardware structure
+ *
+ *  Resets the hardware by resetting the transmit and receive units, masks
+ *  and clears all interrupts, perform a PHY reset, and perform a link (MAC)
+ *  reset.
+ **/
+s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw)
+{
+	ixgbe_link_speed link_speed;
+	s32 status;
+	u32 ctrl = 0;
+	u32 i, autoc, autoc2;
+	u32 curr_lms;
+	bool link_up = false;
+
+	DEBUGFUNC("ixgbe_reset_hw_82599");
+
+	/* Call adapter stop to disable tx/rx and clear interrupts */
+	status = hw->mac.ops.stop_adapter(hw);
+	if (status != IXGBE_SUCCESS)
+		goto reset_hw_out;
+
+	/* flush pending Tx transactions */
+	ixgbe_clear_tx_pending(hw);
+
+	/* PHY ops must be identified and initialized prior to reset */
+
+	/* Identify PHY and related function pointers */
+	status = hw->phy.ops.init(hw);
+
+	if (status == IXGBE_ERR_SFP_NOT_SUPPORTED)
+		goto reset_hw_out;
+
+	/* Setup SFP module if there is one present. */
+	if (hw->phy.sfp_setup_needed) {
+		status = hw->mac.ops.setup_sfp(hw);
+		hw->phy.sfp_setup_needed = false;
+	}
+
+	if (status == IXGBE_ERR_SFP_NOT_SUPPORTED)
+		goto reset_hw_out;
+
+	/* Reset PHY */
+	if (hw->phy.reset_disable == false && hw->phy.ops.reset != NULL)
+		hw->phy.ops.reset(hw);
+
+	/* remember AUTOC from before we reset */
+	curr_lms = IXGBE_READ_REG(hw, IXGBE_AUTOC) & IXGBE_AUTOC_LMS_MASK;
+
+mac_reset_top:
+	/*
+	 * Issue global reset to the MAC.  Needs to be SW reset if link is up.
+	 * If link reset is used when link is up, it might reset the PHY when
+	 * mng is using it.  If link is down or the flag to force full link
+	 * reset is set, then perform link reset.
+	 */
+	ctrl = IXGBE_CTRL_LNK_RST;
+	if (!hw->force_full_reset) {
+		hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
+		if (link_up)
+			ctrl = IXGBE_CTRL_RST;
+	}
+
+	ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL);
+	IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl);
+	IXGBE_WRITE_FLUSH(hw);
+
+	/* Poll for reset bit to self-clear meaning reset is complete */
+	for (i = 0; i < 10; i++) {
+		usec_delay(1);
+		ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
+		if (!(ctrl & IXGBE_CTRL_RST_MASK))
+			break;
+	}
+
+	if (ctrl & IXGBE_CTRL_RST_MASK) {
+		status = IXGBE_ERR_RESET_FAILED;
+		DEBUGOUT("Reset polling failed to complete.\n");
+	}
+
+	msec_delay(50);
+
+	/*
+	 * Double resets are required for recovery from certain error
+	 * conditions.  Between resets, it is necessary to stall to
+	 * allow time for any pending HW events to complete.
+	 */
+	if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) {
+		hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
+		goto mac_reset_top;
+	}
+
+	/*
+	 * Store the original AUTOC/AUTOC2 values if they have not been
+	 * stored off yet.  Otherwise restore the stored original
+	 * values since the reset operation sets back to defaults.
+	 */
+	autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
+
+	/* Enable link if disabled in NVM */
+	if (autoc2 & IXGBE_AUTOC2_LINK_DISABLE_MASK) {
+		autoc2 &= ~IXGBE_AUTOC2_LINK_DISABLE_MASK;
+		IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2);
+		IXGBE_WRITE_FLUSH(hw);
+	}
+
+	if (hw->mac.orig_link_settings_stored == false) {
+		hw->mac.orig_autoc = autoc;
+		hw->mac.orig_autoc2 = autoc2;
+		hw->mac.orig_link_settings_stored = true;
+	} else {
+
+		/* If MNG FW is running on a multi-speed device that
+		 * doesn't autoneg with out driver support we need to
+		 * leave LMS in the state it was before we MAC reset.
+		 * Likewise if we support WoL we don't want change the
+		 * LMS state.
+		 */
+		if ((hw->phy.multispeed_fiber && ixgbe_mng_enabled(hw)) ||
+		    hw->wol_enabled)
+			hw->mac.orig_autoc =
+				(hw->mac.orig_autoc & ~IXGBE_AUTOC_LMS_MASK) |
+				curr_lms;
+
+		if (autoc != hw->mac.orig_autoc) {
+			status = hw->mac.ops.prot_autoc_write(hw,
+							hw->mac.orig_autoc,
+							false);
+			if (status != IXGBE_SUCCESS)
+				goto reset_hw_out;
+		}
+
+		if ((autoc2 & IXGBE_AUTOC2_UPPER_MASK) !=
+		    (hw->mac.orig_autoc2 & IXGBE_AUTOC2_UPPER_MASK)) {
+			autoc2 &= ~IXGBE_AUTOC2_UPPER_MASK;
+			autoc2 |= (hw->mac.orig_autoc2 &
+				   IXGBE_AUTOC2_UPPER_MASK);
+			IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2);
+		}
+	}
+
+	/* Store the permanent mac address */
+	hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
+
+	/*
+	 * Store MAC address from RAR0, clear receive address registers, and
+	 * clear the multicast table.  Also reset num_rar_entries to 128,
+	 * since we modify this value when programming the SAN MAC address.
+	 */
+	hw->mac.num_rar_entries = 128;
+	hw->mac.ops.init_rx_addrs(hw);
+
+	/* Store the permanent SAN mac address */
+	hw->mac.ops.get_san_mac_addr(hw, hw->mac.san_addr);
+
+	/* Add the SAN MAC address to the RAR only if it's a valid address */
+	if (ixgbe_validate_mac_addr(hw->mac.san_addr) == 0) {
+		hw->mac.ops.set_rar(hw, hw->mac.num_rar_entries - 1,
+				    hw->mac.san_addr, 0, IXGBE_RAH_AV);
+
+		/* Save the SAN MAC RAR index */
+		hw->mac.san_mac_rar_index = hw->mac.num_rar_entries - 1;
+
+		/* Reserve the last RAR for the SAN MAC address */
+		hw->mac.num_rar_entries--;
+	}
+
+	/* Store the alternative WWNN/WWPN prefix */
+	hw->mac.ops.get_wwn_prefix(hw, &hw->mac.wwnn_prefix,
+				   &hw->mac.wwpn_prefix);
+
+reset_hw_out:
+	return status;
+}
+
+/**
+ * ixgbe_fdir_check_cmd_complete - poll to check whether FDIRCMD is complete
+ * @hw: pointer to hardware structure
+ * @fdircmd: current value of FDIRCMD register
+ */
+STATIC s32 ixgbe_fdir_check_cmd_complete(struct ixgbe_hw *hw, u32 *fdircmd)
+{
+	int i;
+
+	for (i = 0; i < IXGBE_FDIRCMD_CMD_POLL; i++) {
+		*fdircmd = IXGBE_READ_REG(hw, IXGBE_FDIRCMD);
+		if (!(*fdircmd & IXGBE_FDIRCMD_CMD_MASK))
+			return IXGBE_SUCCESS;
+		usec_delay(10);
+	}
+
+	return IXGBE_ERR_FDIR_CMD_INCOMPLETE;
+}
+
+/**
+ *  ixgbe_reinit_fdir_tables_82599 - Reinitialize Flow Director tables.
+ *  @hw: pointer to hardware structure
+ **/
+s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw)
+{
+	s32 err;
+	int i;
+	u32 fdirctrl = IXGBE_READ_REG(hw, IXGBE_FDIRCTRL);
+	u32 fdircmd;
+	fdirctrl &= ~IXGBE_FDIRCTRL_INIT_DONE;
+
+	DEBUGFUNC("ixgbe_reinit_fdir_tables_82599");
+
+	/*
+	 * Before starting reinitialization process,
+	 * FDIRCMD.CMD must be zero.
+	 */
+	err = ixgbe_fdir_check_cmd_complete(hw, &fdircmd);
+	if (err) {
+		DEBUGOUT("Flow Director previous command did not complete, aborting table re-initialization.\n");
+		return err;
+	}
+
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRFREE, 0);
+	IXGBE_WRITE_FLUSH(hw);
+	/*
+	 * 82599 adapters flow director init flow cannot be restarted,
+	 * Workaround 82599 silicon errata by performing the following steps
+	 * before re-writing the FDIRCTRL control register with the same value.
+	 * - write 1 to bit 8 of FDIRCMD register &
+	 * - write 0 to bit 8 of FDIRCMD register
+	 */
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD,
+			(IXGBE_READ_REG(hw, IXGBE_FDIRCMD) |
+			 IXGBE_FDIRCMD_CLEARHT));
+	IXGBE_WRITE_FLUSH(hw);
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD,
+			(IXGBE_READ_REG(hw, IXGBE_FDIRCMD) &
+			 ~IXGBE_FDIRCMD_CLEARHT));
+	IXGBE_WRITE_FLUSH(hw);
+	/*
+	 * Clear FDIR Hash register to clear any leftover hashes
+	 * waiting to be programmed.
+	 */
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, 0x00);
+	IXGBE_WRITE_FLUSH(hw);
+
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl);
+	IXGBE_WRITE_FLUSH(hw);
+
+	/* Poll init-done after we write FDIRCTRL register */
+	for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) {
+		if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) &
+				   IXGBE_FDIRCTRL_INIT_DONE)
+			break;
+		msec_delay(1);
+	}
+	if (i >= IXGBE_FDIR_INIT_DONE_POLL) {
+		DEBUGOUT("Flow Director Signature poll time exceeded!\n");
+		return IXGBE_ERR_FDIR_REINIT_FAILED;
+	}
+
+	/* Clear FDIR statistics registers (read to clear) */
+	IXGBE_READ_REG(hw, IXGBE_FDIRUSTAT);
+	IXGBE_READ_REG(hw, IXGBE_FDIRFSTAT);
+	IXGBE_READ_REG(hw, IXGBE_FDIRMATCH);
+	IXGBE_READ_REG(hw, IXGBE_FDIRMISS);
+	IXGBE_READ_REG(hw, IXGBE_FDIRLEN);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_fdir_enable_82599 - Initialize Flow Director control registers
+ *  @hw: pointer to hardware structure
+ *  @fdirctrl: value to write to flow director control register
+ **/
+STATIC void ixgbe_fdir_enable_82599(struct ixgbe_hw *hw, u32 fdirctrl)
+{
+	int i;
+
+	DEBUGFUNC("ixgbe_fdir_enable_82599");
+
+	/* Prime the keys for hashing */
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRHKEY, IXGBE_ATR_BUCKET_HASH_KEY);
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRSKEY, IXGBE_ATR_SIGNATURE_HASH_KEY);
+
+	/*
+	 * Poll init-done after we write the register.  Estimated times:
+	 *      10G: PBALLOC = 11b, timing is 60us
+	 *       1G: PBALLOC = 11b, timing is 600us
+	 *     100M: PBALLOC = 11b, timing is 6ms
+	 *
+	 *     Multiple these timings by 4 if under full Rx load
+	 *
+	 * So we'll poll for IXGBE_FDIR_INIT_DONE_POLL times, sleeping for
+	 * 1 msec per poll time.  If we're at line rate and drop to 100M, then
+	 * this might not finish in our poll time, but we can live with that
+	 * for now.
+	 */
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl);
+	IXGBE_WRITE_FLUSH(hw);
+	for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) {
+		if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) &
+				   IXGBE_FDIRCTRL_INIT_DONE)
+			break;
+		msec_delay(1);
+	}
+
+	if (i >= IXGBE_FDIR_INIT_DONE_POLL)
+		DEBUGOUT("Flow Director poll time exceeded!\n");
+}
+
+/**
+ *  ixgbe_init_fdir_signature_82599 - Initialize Flow Director signature filters
+ *  @hw: pointer to hardware structure
+ *  @fdirctrl: value to write to flow director control register, initially
+ *	     contains just the value of the Rx packet buffer allocation
+ **/
+s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 fdirctrl)
+{
+	DEBUGFUNC("ixgbe_init_fdir_signature_82599");
+
+	/*
+	 * Continue setup of fdirctrl register bits:
+	 *  Move the flexible bytes to use the ethertype - shift 6 words
+	 *  Set the maximum length per hash bucket to 0xA filters
+	 *  Send interrupt when 64 filters are left
+	 */
+	fdirctrl |= (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT) |
+		    (0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT) |
+		    (4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT);
+
+	/* write hashes and fdirctrl register, poll for completion */
+	ixgbe_fdir_enable_82599(hw, fdirctrl);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_init_fdir_perfect_82599 - Initialize Flow Director perfect filters
+ *  @hw: pointer to hardware structure
+ *  @fdirctrl: value to write to flow director control register, initially
+ *	     contains just the value of the Rx packet buffer allocation
+ *  @cloud_mode: true - cloud mode, false - other mode
+ **/
+s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 fdirctrl,
+			bool cloud_mode)
+{
+	DEBUGFUNC("ixgbe_init_fdir_perfect_82599");
+
+	/*
+	 * Continue setup of fdirctrl register bits:
+	 *  Turn perfect match filtering on
+	 *  Report hash in RSS field of Rx wb descriptor
+	 *  Initialize the drop queue to queue 127
+	 *  Move the flexible bytes to use the ethertype - shift 6 words
+	 *  Set the maximum length per hash bucket to 0xA filters
+	 *  Send interrupt when 64 (0x4 * 16) filters are left
+	 */
+	fdirctrl |= IXGBE_FDIRCTRL_PERFECT_MATCH |
+		    IXGBE_FDIRCTRL_REPORT_STATUS |
+		    (IXGBE_FDIR_DROP_QUEUE << IXGBE_FDIRCTRL_DROP_Q_SHIFT) |
+		    (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT) |
+		    (0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT) |
+		    (4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT);
+
+	if (cloud_mode)
+		fdirctrl |=(IXGBE_FDIRCTRL_FILTERMODE_CLOUD <<
+					IXGBE_FDIRCTRL_FILTERMODE_SHIFT);
+
+	/* write hashes and fdirctrl register, poll for completion */
+	ixgbe_fdir_enable_82599(hw, fdirctrl);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_set_fdir_drop_queue_82599 - Set Flow Director drop queue
+ *  @hw: pointer to hardware structure
+ *  @dropqueue: Rx queue index used for the dropped packets
+ **/
+void ixgbe_set_fdir_drop_queue_82599(struct ixgbe_hw *hw, u8 dropqueue)
+{
+	u32 fdirctrl;
+
+	DEBUGFUNC("ixgbe_set_fdir_drop_queue_82599");
+	/* Clear init done bit and drop queue field */
+	fdirctrl = IXGBE_READ_REG(hw, IXGBE_FDIRCTRL);
+	fdirctrl &= ~(IXGBE_FDIRCTRL_DROP_Q_MASK | IXGBE_FDIRCTRL_INIT_DONE);
+
+	/* Set drop queue */
+	fdirctrl |= (dropqueue << IXGBE_FDIRCTRL_DROP_Q_SHIFT);
+	if ((hw->mac.type == ixgbe_mac_X550) ||
+	    (hw->mac.type == ixgbe_mac_X550EM_x) ||
+	    (hw->mac.type == ixgbe_mac_X550EM_a))
+		fdirctrl |= IXGBE_FDIRCTRL_DROP_NO_MATCH;
+
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD,
+			(IXGBE_READ_REG(hw, IXGBE_FDIRCMD) |
+			 IXGBE_FDIRCMD_CLEARHT));
+	IXGBE_WRITE_FLUSH(hw);
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD,
+			(IXGBE_READ_REG(hw, IXGBE_FDIRCMD) &
+			 ~IXGBE_FDIRCMD_CLEARHT));
+	IXGBE_WRITE_FLUSH(hw);
+
+	/* write hashes and fdirctrl register, poll for completion */
+	ixgbe_fdir_enable_82599(hw, fdirctrl);
+}
+
+/*
+ * These defines allow us to quickly generate all of the necessary instructions
+ * in the function below by simply calling out IXGBE_COMPUTE_SIG_HASH_ITERATION
+ * for values 0 through 15
+ */
+#define IXGBE_ATR_COMMON_HASH_KEY \
+		(IXGBE_ATR_BUCKET_HASH_KEY & IXGBE_ATR_SIGNATURE_HASH_KEY)
+#define IXGBE_COMPUTE_SIG_HASH_ITERATION(_n) \
+do { \
+	u32 n = (_n); \
+	if (IXGBE_ATR_COMMON_HASH_KEY & (0x01 << n)) \
+		common_hash ^= lo_hash_dword >> n; \
+	else if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << n)) \
+		bucket_hash ^= lo_hash_dword >> n; \
+	else if (IXGBE_ATR_SIGNATURE_HASH_KEY & (0x01 << n)) \
+		sig_hash ^= lo_hash_dword << (16 - n); \
+	if (IXGBE_ATR_COMMON_HASH_KEY & (0x01 << (n + 16))) \
+		common_hash ^= hi_hash_dword >> n; \
+	else if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << (n + 16))) \
+		bucket_hash ^= hi_hash_dword >> n; \
+	else if (IXGBE_ATR_SIGNATURE_HASH_KEY & (0x01 << (n + 16))) \
+		sig_hash ^= hi_hash_dword << (16 - n); \
+} while (0)
+
+/**
+ *  ixgbe_atr_compute_sig_hash_82599 - Compute the signature hash
+ *  @stream: input bitstream to compute the hash on
+ *
+ *  This function is almost identical to the function above but contains
+ *  several optimizations such as unwinding all of the loops, letting the
+ *  compiler work out all of the conditional ifs since the keys are static
+ *  defines, and computing two keys at once since the hashed dword stream
+ *  will be the same for both keys.
+ **/
+u32 ixgbe_atr_compute_sig_hash_82599(union ixgbe_atr_hash_dword input,
+				     union ixgbe_atr_hash_dword common)
+{
+	u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan;
+	u32 sig_hash = 0, bucket_hash = 0, common_hash = 0;
+
+	/* record the flow_vm_vlan bits as they are a key part to the hash */
+	flow_vm_vlan = IXGBE_NTOHL(input.dword);
+
+	/* generate common hash dword */
+	hi_hash_dword = IXGBE_NTOHL(common.dword);
+
+	/* low dword is word swapped version of common */
+	lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16);
+
+	/* apply flow ID/VM pool/VLAN ID bits to hash words */
+	hi_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan >> 16);
+
+	/* Process bits 0 and 16 */
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(0);
+
+	/*
+	 * apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to
+	 * delay this because bit 0 of the stream should not be processed
+	 * so we do not add the VLAN until after bit 0 was processed
+	 */
+	lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16);
+
+	/* Process remaining 30 bit of the key */
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(1);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(2);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(3);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(4);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(5);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(6);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(7);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(8);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(9);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(10);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(11);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(12);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(13);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(14);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(15);
+
+	/* combine common_hash result with signature and bucket hashes */
+	bucket_hash ^= common_hash;
+	bucket_hash &= IXGBE_ATR_HASH_MASK;
+
+	sig_hash ^= common_hash << 16;
+	sig_hash &= IXGBE_ATR_HASH_MASK << 16;
+
+	/* return completed signature hash */
+	return sig_hash ^ bucket_hash;
+}
+
+/**
+ *  ixgbe_atr_add_signature_filter_82599 - Adds a signature hash filter
+ *  @hw: pointer to hardware structure
+ *  @input: unique input dword
+ *  @common: compressed common input dword
+ *  @queue: queue index to direct traffic to
+ *
+ * Note that the tunnel bit in input must not be set when the hardware
+ * tunneling support does not exist.
+ **/
+void ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw,
+					   union ixgbe_atr_hash_dword input,
+					   union ixgbe_atr_hash_dword common,
+					   u8 queue)
+{
+	u64 fdirhashcmd;
+	u8 flow_type;
+	bool tunnel;
+	u32 fdircmd;
+
+	DEBUGFUNC("ixgbe_fdir_add_signature_filter_82599");
+
+	/*
+	 * Get the flow_type in order to program FDIRCMD properly
+	 * lowest 2 bits are FDIRCMD.L4TYPE, third lowest bit is FDIRCMD.IPV6
+	 * fifth is FDIRCMD.TUNNEL_FILTER
+	 */
+	tunnel = !!(input.formatted.flow_type & IXGBE_ATR_L4TYPE_TUNNEL_MASK);
+	flow_type = input.formatted.flow_type &
+		    (IXGBE_ATR_L4TYPE_TUNNEL_MASK - 1);
+	switch (flow_type) {
+	case IXGBE_ATR_FLOW_TYPE_TCPV4:
+	case IXGBE_ATR_FLOW_TYPE_UDPV4:
+	case IXGBE_ATR_FLOW_TYPE_SCTPV4:
+	case IXGBE_ATR_FLOW_TYPE_TCPV6:
+	case IXGBE_ATR_FLOW_TYPE_UDPV6:
+	case IXGBE_ATR_FLOW_TYPE_SCTPV6:
+		break;
+	default:
+		DEBUGOUT(" Error on flow type input\n");
+		return;
+	}
+
+	/* configure FDIRCMD register */
+	fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE |
+		  IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN;
+	fdircmd |= (u32)flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT;
+	fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT;
+	if (tunnel)
+		fdircmd |= IXGBE_FDIRCMD_TUNNEL_FILTER;
+
+	/*
+	 * The lower 32-bits of fdirhashcmd is for FDIRHASH, the upper 32-bits
+	 * is for FDIRCMD.  Then do a 64-bit register write from FDIRHASH.
+	 */
+	fdirhashcmd = (u64)fdircmd << 32;
+	fdirhashcmd |= ixgbe_atr_compute_sig_hash_82599(input, common);
+	IXGBE_WRITE_REG64(hw, IXGBE_FDIRHASH, fdirhashcmd);
+
+	DEBUGOUT2("Tx Queue=%x hash=%x\n", queue, (u32)fdirhashcmd);
+
+	return;
+}
+
+#define IXGBE_COMPUTE_BKT_HASH_ITERATION(_n) \
+do { \
+	u32 n = (_n); \
+	if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << n)) \
+		bucket_hash ^= lo_hash_dword >> n; \
+	if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << (n + 16))) \
+		bucket_hash ^= hi_hash_dword >> n; \
+} while (0)
+
+/**
+ *  ixgbe_atr_compute_perfect_hash_82599 - Compute the perfect filter hash
+ *  @atr_input: input bitstream to compute the hash on
+ *  @input_mask: mask for the input bitstream
+ *
+ *  This function serves two main purposes.  First it applies the input_mask
+ *  to the atr_input resulting in a cleaned up atr_input data stream.
+ *  Secondly it computes the hash and stores it in the bkt_hash field at
+ *  the end of the input byte stream.  This way it will be available for
+ *  future use without needing to recompute the hash.
+ **/
+void ixgbe_atr_compute_perfect_hash_82599(union ixgbe_atr_input *input,
+					  union ixgbe_atr_input *input_mask)
+{
+
+	u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan;
+	u32 bucket_hash = 0;
+	u32 hi_dword = 0;
+	u32 i = 0;
+
+	/* Apply masks to input data */
+	for (i = 0; i < 14; i++)
+		input->dword_stream[i]  &= input_mask->dword_stream[i];
+
+	/* record the flow_vm_vlan bits as they are a key part to the hash */
+	flow_vm_vlan = IXGBE_NTOHL(input->dword_stream[0]);
+
+	/* generate common hash dword */
+	for (i = 1; i <= 13; i++)
+		hi_dword ^= input->dword_stream[i];
+	hi_hash_dword = IXGBE_NTOHL(hi_dword);
+
+	/* low dword is word swapped version of common */
+	lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16);
+
+	/* apply flow ID/VM pool/VLAN ID bits to hash words */
+	hi_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan >> 16);
+
+	/* Process bits 0 and 16 */
+	IXGBE_COMPUTE_BKT_HASH_ITERATION(0);
+
+	/*
+	 * apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to
+	 * delay this because bit 0 of the stream should not be processed
+	 * so we do not add the VLAN until after bit 0 was processed
+	 */
+	lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16);
+
+	/* Process remaining 30 bit of the key */
+	for (i = 1; i <= 15; i++)
+		IXGBE_COMPUTE_BKT_HASH_ITERATION(i);
+
+	/*
+	 * Limit hash to 13 bits since max bucket count is 8K.
+	 * Store result at the end of the input stream.
+	 */
+	input->formatted.bkt_hash = bucket_hash & 0x1FFF;
+}
+
+/**
+ *  ixgbe_get_fdirtcpm_82599 - generate a TCP port from atr_input_masks
+ *  @input_mask: mask to be bit swapped
+ *
+ *  The source and destination port masks for flow director are bit swapped
+ *  in that bit 15 effects bit 0, 14 effects 1, 13, 2 etc.  In order to
+ *  generate a correctly swapped value we need to bit swap the mask and that
+ *  is what is accomplished by this function.
+ **/
+STATIC u32 ixgbe_get_fdirtcpm_82599(union ixgbe_atr_input *input_mask)
+{
+	u32 mask = IXGBE_NTOHS(input_mask->formatted.dst_port);
+	mask <<= IXGBE_FDIRTCPM_DPORTM_SHIFT;
+	mask |= IXGBE_NTOHS(input_mask->formatted.src_port);
+	mask = ((mask & 0x55555555) << 1) | ((mask & 0xAAAAAAAA) >> 1);
+	mask = ((mask & 0x33333333) << 2) | ((mask & 0xCCCCCCCC) >> 2);
+	mask = ((mask & 0x0F0F0F0F) << 4) | ((mask & 0xF0F0F0F0) >> 4);
+	return ((mask & 0x00FF00FF) << 8) | ((mask & 0xFF00FF00) >> 8);
+}
+
+/*
+ * These two macros are meant to address the fact that we have registers
+ * that are either all or in part big-endian.  As a result on big-endian
+ * systems we will end up byte swapping the value to little-endian before
+ * it is byte swapped again and written to the hardware in the original
+ * big-endian format.
+ */
+#define IXGBE_STORE_AS_BE32(_value) \
+	(((u32)(_value) >> 24) | (((u32)(_value) & 0x00FF0000) >> 8) | \
+	 (((u32)(_value) & 0x0000FF00) << 8) | ((u32)(_value) << 24))
+
+#define IXGBE_WRITE_REG_BE32(a, reg, value) \
+	IXGBE_WRITE_REG((a), (reg), IXGBE_STORE_AS_BE32(IXGBE_NTOHL(value)))
+
+#define IXGBE_STORE_AS_BE16(_value) \
+	IXGBE_NTOHS(((u16)(_value) >> 8) | ((u16)(_value) << 8))
+
+s32 ixgbe_fdir_set_input_mask_82599(struct ixgbe_hw *hw,
+				    union ixgbe_atr_input *input_mask, bool cloud_mode)
+{
+	/* mask IPv6 since it is currently not supported */
+	u32 fdirm = IXGBE_FDIRM_DIPv6;
+	u32 fdirtcpm;
+	u32 fdirip6m;
+	DEBUGFUNC("ixgbe_fdir_set_atr_input_mask_82599");
+
+	/*
+	 * Program the relevant mask registers.  If src/dst_port or src/dst_addr
+	 * are zero, then assume a full mask for that field.  Also assume that
+	 * a VLAN of 0 is unspecified, so mask that out as well.  L4type
+	 * cannot be masked out in this implementation.
+	 *
+	 * This also assumes IPv4 only.  IPv6 masking isn't supported at this
+	 * point in time.
+	 */
+
+	/* verify bucket hash is cleared on hash generation */
+	if (input_mask->formatted.bkt_hash)
+		DEBUGOUT(" bucket hash should always be 0 in mask\n");
+
+	/* Program FDIRM and verify partial masks */
+	switch (input_mask->formatted.vm_pool & 0x7F) {
+	case 0x0:
+		fdirm |= IXGBE_FDIRM_POOL;
+	case 0x7F:
+		break;
+	default:
+		DEBUGOUT(" Error on vm pool mask\n");
+		return IXGBE_ERR_CONFIG;
+	}
+
+	switch (input_mask->formatted.flow_type & IXGBE_ATR_L4TYPE_MASK) {
+	case 0x0:
+		fdirm |= IXGBE_FDIRM_L4P;
+		if (input_mask->formatted.dst_port ||
+		    input_mask->formatted.src_port) {
+			DEBUGOUT(" Error on src/dst port mask\n");
+			return IXGBE_ERR_CONFIG;
+		}
+	case IXGBE_ATR_L4TYPE_MASK:
+		break;
+	default:
+		DEBUGOUT(" Error on flow type mask\n");
+		return IXGBE_ERR_CONFIG;
+	}
+
+	switch (IXGBE_NTOHS(input_mask->formatted.vlan_id) & 0xEFFF) {
+	case 0x0000:
+		/* mask VLAN ID, fall through to mask VLAN priority */
+		fdirm |= IXGBE_FDIRM_VLANID;
+	case 0x0FFF:
+		/* mask VLAN priority */
+		fdirm |= IXGBE_FDIRM_VLANP;
+		break;
+	case 0xE000:
+		/* mask VLAN ID only, fall through */
+		fdirm |= IXGBE_FDIRM_VLANID;
+	case 0xEFFF:
+		/* no VLAN fields masked */
+		break;
+	default:
+		DEBUGOUT(" Error on VLAN mask\n");
+		return IXGBE_ERR_CONFIG;
+	}
+
+	switch (input_mask->formatted.flex_bytes & 0xFFFF) {
+	case 0x0000:
+		/* Mask Flex Bytes, fall through */
+		fdirm |= IXGBE_FDIRM_FLEX;
+	case 0xFFFF:
+		break;
+	default:
+		DEBUGOUT(" Error on flexible byte mask\n");
+		return IXGBE_ERR_CONFIG;
+	}
+
+	if (cloud_mode) {
+		fdirm |= IXGBE_FDIRM_L3P;
+		fdirip6m = ((u32) 0xFFFFU << IXGBE_FDIRIP6M_DIPM_SHIFT);
+		fdirip6m |= IXGBE_FDIRIP6M_ALWAYS_MASK;
+
+		switch (input_mask->formatted.inner_mac[0] & 0xFF) {
+		case 0x00:
+			/* Mask inner MAC, fall through */
+			fdirip6m |= IXGBE_FDIRIP6M_INNER_MAC;
+		case 0xFF:
+			break;
+		default:
+			DEBUGOUT(" Error on inner_mac byte mask\n");
+			return IXGBE_ERR_CONFIG;
+		}
+
+		switch (input_mask->formatted.tni_vni & 0xFFFFFFFF) {
+		case 0x0:
+			/* Mask vxlan id */
+			fdirip6m |= IXGBE_FDIRIP6M_TNI_VNI;
+			break;
+		case 0x00FFFFFF:
+			fdirip6m |= IXGBE_FDIRIP6M_TNI_VNI_24;
+			break;
+		case 0xFFFFFFFF:
+			break;
+		default:
+			DEBUGOUT(" Error on TNI/VNI byte mask\n");
+			return IXGBE_ERR_CONFIG;
+		}
+
+		switch (input_mask->formatted.tunnel_type & 0xFFFF) {
+		case 0x0:
+			/* Mask turnnel type, fall through */
+			fdirip6m |= IXGBE_FDIRIP6M_TUNNEL_TYPE;
+		case 0xFFFF:
+			break;
+		default:
+			DEBUGOUT(" Error on tunnel type byte mask\n");
+			return IXGBE_ERR_CONFIG;
+		}
+		IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIP6M, fdirip6m);
+
+		/* Set all bits in FDIRTCPM, FDIRUDPM, FDIRSIP4M and
+		 * FDIRDIP4M in cloud mode to allow L3/L3 packets to
+		 * tunnel.
+		 */
+		IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM, 0xFFFFFFFF);
+		IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM, 0xFFFFFFFF);
+		IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRDIP4M, 0xFFFFFFFF);
+		IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIP4M, 0xFFFFFFFF);
+	}
+
+	/* Now mask VM pool and destination IPv6 - bits 5 and 2 */
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRM, fdirm);
+
+	if (!cloud_mode) {
+		/* store the TCP/UDP port masks, bit reversed from port
+		 * layout */
+		fdirtcpm = ixgbe_get_fdirtcpm_82599(input_mask);
+
+		/* write both the same so that UDP and TCP use the same mask */
+		IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM, ~fdirtcpm);
+		IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM, ~fdirtcpm);
+		/* also use it for SCTP */
+		switch (hw->mac.type) {
+		case ixgbe_mac_X550:
+		case ixgbe_mac_X550EM_x:
+		case ixgbe_mac_X550EM_a:
+			IXGBE_WRITE_REG(hw, IXGBE_FDIRSCTPM, ~fdirtcpm);
+			break;
+		default:
+			break;
+		}
+
+		/* store source and destination IP masks (big-enian) */
+		IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIP4M,
+				     ~input_mask->formatted.src_ip[0]);
+		IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRDIP4M,
+				     ~input_mask->formatted.dst_ip[0]);
+	}
+	return IXGBE_SUCCESS;
+}
+
+s32 ixgbe_fdir_write_perfect_filter_82599(struct ixgbe_hw *hw,
+					  union ixgbe_atr_input *input,
+					  u16 soft_id, u8 queue, bool cloud_mode)
+{
+	u32 fdirport, fdirvlan, fdirhash, fdircmd;
+	u32 addr_low, addr_high;
+	u32 cloud_type = 0;
+	s32 err;
+
+	DEBUGFUNC("ixgbe_fdir_write_perfect_filter_82599");
+	if (!cloud_mode) {
+		/* currently IPv6 is not supported, must be programmed with 0 */
+		IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(0),
+				     input->formatted.src_ip[0]);
+		IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(1),
+				     input->formatted.src_ip[1]);
+		IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(2),
+				     input->formatted.src_ip[2]);
+
+		/* record the source address (big-endian) */
+		IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPSA,
+			input->formatted.src_ip[0]);
+
+		/* record the first 32 bits of the destination address
+		 * (big-endian) */
+		IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPDA,
+			input->formatted.dst_ip[0]);
+
+		/* record source and destination port (little-endian)*/
+		fdirport = IXGBE_NTOHS(input->formatted.dst_port);
+		fdirport <<= IXGBE_FDIRPORT_DESTINATION_SHIFT;
+		fdirport |= IXGBE_NTOHS(input->formatted.src_port);
+		IXGBE_WRITE_REG(hw, IXGBE_FDIRPORT, fdirport);
+	}
+
+	/* record VLAN (little-endian) and flex_bytes(big-endian) */
+	fdirvlan = IXGBE_STORE_AS_BE16(input->formatted.flex_bytes);
+	fdirvlan <<= IXGBE_FDIRVLAN_FLEX_SHIFT;
+	fdirvlan |= IXGBE_NTOHS(input->formatted.vlan_id);
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRVLAN, fdirvlan);
+
+	if (cloud_mode) {
+		if (input->formatted.tunnel_type != 0)
+			cloud_type = 0x80000000;
+
+		addr_low = ((u32)input->formatted.inner_mac[0] |
+				((u32)input->formatted.inner_mac[1] << 8) |
+				((u32)input->formatted.inner_mac[2] << 16) |
+				((u32)input->formatted.inner_mac[3] << 24));
+		addr_high = ((u32)input->formatted.inner_mac[4] |
+				((u32)input->formatted.inner_mac[5] << 8));
+		cloud_type |= addr_high;
+		IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(0), addr_low);
+		IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(1), cloud_type);
+		IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(2), input->formatted.tni_vni);
+	}
+
+	/* configure FDIRHASH register */
+	fdirhash = input->formatted.bkt_hash;
+	fdirhash |= soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT;
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash);
+
+	/*
+	 * flush all previous writes to make certain registers are
+	 * programmed prior to issuing the command
+	 */
+	IXGBE_WRITE_FLUSH(hw);
+
+	/* configure FDIRCMD register */
+	fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE |
+		  IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN;
+	if (queue == IXGBE_FDIR_DROP_QUEUE)
+		fdircmd |= IXGBE_FDIRCMD_DROP;
+	if (input->formatted.flow_type & IXGBE_ATR_L4TYPE_TUNNEL_MASK)
+		fdircmd |= IXGBE_FDIRCMD_TUNNEL_FILTER;
+	fdircmd |= input->formatted.flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT;
+	fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT;
+	fdircmd |= (u32)input->formatted.vm_pool << IXGBE_FDIRCMD_VT_POOL_SHIFT;
+
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, fdircmd);
+	err = ixgbe_fdir_check_cmd_complete(hw, &fdircmd);
+	if (err) {
+		DEBUGOUT("Flow Director command did not complete!\n");
+		return err;
+	}
+
+	return IXGBE_SUCCESS;
+}
+
+s32 ixgbe_fdir_erase_perfect_filter_82599(struct ixgbe_hw *hw,
+					  union ixgbe_atr_input *input,
+					  u16 soft_id)
+{
+	u32 fdirhash;
+	u32 fdircmd;
+	s32 err;
+
+	/* configure FDIRHASH register */
+	fdirhash = input->formatted.bkt_hash;
+	fdirhash |= soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT;
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash);
+
+	/* flush hash to HW */
+	IXGBE_WRITE_FLUSH(hw);
+
+	/* Query if filter is present */
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, IXGBE_FDIRCMD_CMD_QUERY_REM_FILT);
+
+	err = ixgbe_fdir_check_cmd_complete(hw, &fdircmd);
+	if (err) {
+		DEBUGOUT("Flow Director command did not complete!\n");
+		return err;
+	}
+
+	/* if filter exists in hardware then remove it */
+	if (fdircmd & IXGBE_FDIRCMD_FILTER_VALID) {
+		IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash);
+		IXGBE_WRITE_FLUSH(hw);
+		IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD,
+				IXGBE_FDIRCMD_CMD_REMOVE_FLOW);
+	}
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_fdir_add_perfect_filter_82599 - Adds a perfect filter
+ *  @hw: pointer to hardware structure
+ *  @input: input bitstream
+ *  @input_mask: mask for the input bitstream
+ *  @soft_id: software index for the filters
+ *  @queue: queue index to direct traffic to
+ *
+ *  Note that the caller to this function must lock before calling, since the
+ *  hardware writes must be protected from one another.
+ **/
+s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw,
+					union ixgbe_atr_input *input,
+					union ixgbe_atr_input *input_mask,
+					u16 soft_id, u8 queue, bool cloud_mode)
+{
+	s32 err = IXGBE_ERR_CONFIG;
+
+	DEBUGFUNC("ixgbe_fdir_add_perfect_filter_82599");
+
+	/*
+	 * Check flow_type formatting, and bail out before we touch the hardware
+	 * if there's a configuration issue
+	 */
+	switch (input->formatted.flow_type) {
+	case IXGBE_ATR_FLOW_TYPE_IPV4:
+	case IXGBE_ATR_FLOW_TYPE_TUNNELED_IPV4:
+		input_mask->formatted.flow_type = IXGBE_ATR_L4TYPE_IPV6_MASK;
+		if (input->formatted.dst_port || input->formatted.src_port) {
+			DEBUGOUT(" Error on src/dst port\n");
+			return IXGBE_ERR_CONFIG;
+		}
+		break;
+	case IXGBE_ATR_FLOW_TYPE_SCTPV4:
+	case IXGBE_ATR_FLOW_TYPE_TUNNELED_SCTPV4:
+		if (input->formatted.dst_port || input->formatted.src_port) {
+			DEBUGOUT(" Error on src/dst port\n");
+			return IXGBE_ERR_CONFIG;
+		}
+	case IXGBE_ATR_FLOW_TYPE_TCPV4:
+	case IXGBE_ATR_FLOW_TYPE_TUNNELED_TCPV4:
+	case IXGBE_ATR_FLOW_TYPE_UDPV4:
+	case IXGBE_ATR_FLOW_TYPE_TUNNELED_UDPV4:
+		input_mask->formatted.flow_type = IXGBE_ATR_L4TYPE_IPV6_MASK |
+						  IXGBE_ATR_L4TYPE_MASK;
+		break;
+	default:
+		DEBUGOUT(" Error on flow type input\n");
+		return err;
+	}
+
+	/* program input mask into the HW */
+	err = ixgbe_fdir_set_input_mask_82599(hw, input_mask, cloud_mode);
+	if (err)
+		return err;
+
+	/* apply mask and compute/store hash */
+	ixgbe_atr_compute_perfect_hash_82599(input, input_mask);
+
+	/* program filters to filter memory */
+	return ixgbe_fdir_write_perfect_filter_82599(hw, input,
+						     soft_id, queue, cloud_mode);
+}
+
+/**
+ *  ixgbe_read_analog_reg8_82599 - Reads 8 bit Omer analog register
+ *  @hw: pointer to hardware structure
+ *  @reg: analog register to read
+ *  @val: read value
+ *
+ *  Performs read operation to Omer analog register specified.
+ **/
+s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val)
+{
+	u32  core_ctl;
+
+	DEBUGFUNC("ixgbe_read_analog_reg8_82599");
+
+	IXGBE_WRITE_REG(hw, IXGBE_CORECTL, IXGBE_CORECTL_WRITE_CMD |
+			(reg << 8));
+	IXGBE_WRITE_FLUSH(hw);
+	usec_delay(10);
+	core_ctl = IXGBE_READ_REG(hw, IXGBE_CORECTL);
+	*val = (u8)core_ctl;
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_write_analog_reg8_82599 - Writes 8 bit Omer analog register
+ *  @hw: pointer to hardware structure
+ *  @reg: atlas register to write
+ *  @val: value to write
+ *
+ *  Performs write operation to Omer analog register specified.
+ **/
+s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val)
+{
+	u32  core_ctl;
+
+	DEBUGFUNC("ixgbe_write_analog_reg8_82599");
+
+	core_ctl = (reg << 8) | val;
+	IXGBE_WRITE_REG(hw, IXGBE_CORECTL, core_ctl);
+	IXGBE_WRITE_FLUSH(hw);
+	usec_delay(10);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_start_hw_82599 - Prepare hardware for Tx/Rx
+ *  @hw: pointer to hardware structure
+ *
+ *  Starts the hardware using the generic start_hw function
+ *  and the generation start_hw function.
+ *  Then performs revision-specific operations, if any.
+ **/
+s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw)
+{
+	s32 ret_val = IXGBE_SUCCESS;
+
+	DEBUGFUNC("ixgbe_start_hw_82599");
+
+	ret_val = ixgbe_start_hw_generic(hw);
+	if (ret_val != IXGBE_SUCCESS)
+		goto out;
+
+	ret_val = ixgbe_start_hw_gen2(hw);
+	if (ret_val != IXGBE_SUCCESS)
+		goto out;
+
+	/* We need to run link autotry after the driver loads */
+	hw->mac.autotry_restart = true;
+
+	if (ret_val == IXGBE_SUCCESS)
+		ret_val = ixgbe_verify_fw_version_82599(hw);
+out:
+	return ret_val;
+}
+
+/**
+ *  ixgbe_identify_phy_82599 - Get physical layer module
+ *  @hw: pointer to hardware structure
+ *
+ *  Determines the physical layer module found on the current adapter.
+ *  If PHY already detected, maintains current PHY type in hw struct,
+ *  otherwise executes the PHY detection routine.
+ **/
+s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw)
+{
+	s32 status;
+
+	DEBUGFUNC("ixgbe_identify_phy_82599");
+
+	/* Detect PHY if not unknown - returns success if already detected. */
+	status = ixgbe_identify_phy_generic(hw);
+	if (status != IXGBE_SUCCESS) {
+		/* 82599 10GBASE-T requires an external PHY */
+		if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_copper)
+			return status;
+		else
+			status = ixgbe_identify_module_generic(hw);
+	}
+
+	/* Set PHY type none if no PHY detected */
+	if (hw->phy.type == ixgbe_phy_unknown) {
+		hw->phy.type = ixgbe_phy_none;
+		return IXGBE_SUCCESS;
+	}
+
+	/* Return error if SFP module has been detected but is not supported */
+	if (hw->phy.type == ixgbe_phy_sfp_unsupported)
+		return IXGBE_ERR_SFP_NOT_SUPPORTED;
+
+	return status;
+}
+
+/**
+ *  ixgbe_get_supported_physical_layer_82599 - Returns physical layer type
+ *  @hw: pointer to hardware structure
+ *
+ *  Determines physical layer capabilities of the current configuration.
+ **/
+u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw)
+{
+	u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+	u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
+	u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK;
+	u32 pma_pmd_10g_parallel = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK;
+	u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
+	u16 ext_ability = 0;
+
+	DEBUGFUNC("ixgbe_get_support_physical_layer_82599");
+
+	hw->phy.ops.identify(hw);
+
+	switch (hw->phy.type) {
+	case ixgbe_phy_tn:
+	case ixgbe_phy_cu_unknown:
+		hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_EXT_ABILITY,
+		IXGBE_MDIO_PMA_PMD_DEV_TYPE, &ext_ability);
+		if (ext_ability & IXGBE_MDIO_PHY_10GBASET_ABILITY)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T;
+		if (ext_ability & IXGBE_MDIO_PHY_1000BASET_ABILITY)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T;
+		if (ext_ability & IXGBE_MDIO_PHY_100BASETX_ABILITY)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX;
+		goto out;
+	default:
+		break;
+	}
+
+	switch (autoc & IXGBE_AUTOC_LMS_MASK) {
+	case IXGBE_AUTOC_LMS_1G_AN:
+	case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
+		if (pma_pmd_1g == IXGBE_AUTOC_1G_KX_BX) {
+			physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX |
+			    IXGBE_PHYSICAL_LAYER_1000BASE_BX;
+			goto out;
+		} else
+			/* SFI mode so read SFP module */
+			goto sfp_check;
+		break;
+	case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
+		if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_CX4)
+			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4;
+		else if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_KX4)
+			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
+		else if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_XAUI)
+			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_XAUI;
+		goto out;
+		break;
+	case IXGBE_AUTOC_LMS_10G_SERIAL:
+		if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_KR) {
+			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KR;
+			goto out;
+		} else if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI)
+			goto sfp_check;
+		break;
+	case IXGBE_AUTOC_LMS_KX4_KX_KR:
+	case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN:
+		if (autoc & IXGBE_AUTOC_KX_SUPP)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX;
+		if (autoc & IXGBE_AUTOC_KX4_SUPP)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
+		if (autoc & IXGBE_AUTOC_KR_SUPP)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KR;
+		goto out;
+		break;
+	default:
+		goto out;
+		break;
+	}
+
+sfp_check:
+	/* SFP check must be done last since DA modules are sometimes used to
+	 * test KR mode -  we need to id KR mode correctly before SFP module.
+	 * Call identify_sfp because the pluggable module may have changed */
+	physical_layer = ixgbe_get_supported_phy_sfp_layer_generic(hw);
+out:
+	return physical_layer;
+}
+
+/**
+ *  ixgbe_enable_rx_dma_82599 - Enable the Rx DMA unit on 82599
+ *  @hw: pointer to hardware structure
+ *  @regval: register value to write to RXCTRL
+ *
+ *  Enables the Rx DMA unit for 82599
+ **/
+s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval)
+{
+
+	DEBUGFUNC("ixgbe_enable_rx_dma_82599");
+
+	/*
+	 * Workaround for 82599 silicon errata when enabling the Rx datapath.
+	 * If traffic is incoming before we enable the Rx unit, it could hang
+	 * the Rx DMA unit.  Therefore, make sure the security engine is
+	 * completely disabled prior to enabling the Rx unit.
+	 */
+
+	hw->mac.ops.disable_sec_rx_path(hw);
+
+	if (regval & IXGBE_RXCTRL_RXEN)
+		ixgbe_enable_rx(hw);
+	else
+		ixgbe_disable_rx(hw);
+
+	hw->mac.ops.enable_sec_rx_path(hw);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_verify_fw_version_82599 - verify FW version for 82599
+ *  @hw: pointer to hardware structure
+ *
+ *  Verifies that installed the firmware version is 0.6 or higher
+ *  for SFI devices. All 82599 SFI devices should have version 0.6 or higher.
+ *
+ *  Returns IXGBE_ERR_EEPROM_VERSION if the FW is not present or
+ *  if the FW version is not supported.
+ **/
+STATIC s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw)
+{
+	s32 status = IXGBE_ERR_EEPROM_VERSION;
+	u16 fw_offset, fw_ptp_cfg_offset;
+	u16 fw_version;
+
+	DEBUGFUNC("ixgbe_verify_fw_version_82599");
+
+	/* firmware check is only necessary for SFI devices */
+	if (hw->phy.media_type != ixgbe_media_type_fiber) {
+		status = IXGBE_SUCCESS;
+		goto fw_version_out;
+	}
+
+	/* get the offset to the Firmware Module block */
+	if (hw->eeprom.ops.read(hw, IXGBE_FW_PTR, &fw_offset)) {
+		ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+			      "eeprom read at offset %d failed", IXGBE_FW_PTR);
+		return IXGBE_ERR_EEPROM_VERSION;
+	}
+
+	if ((fw_offset == 0) || (fw_offset == 0xFFFF))
+		goto fw_version_out;
+
+	/* get the offset to the Pass Through Patch Configuration block */
+	if (hw->eeprom.ops.read(hw, (fw_offset +
+				 IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR),
+				 &fw_ptp_cfg_offset)) {
+		ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+			      "eeprom read at offset %d failed",
+			      fw_offset +
+			      IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR);
+		return IXGBE_ERR_EEPROM_VERSION;
+	}
+
+	if ((fw_ptp_cfg_offset == 0) || (fw_ptp_cfg_offset == 0xFFFF))
+		goto fw_version_out;
+
+	/* get the firmware version */
+	if (hw->eeprom.ops.read(hw, (fw_ptp_cfg_offset +
+			    IXGBE_FW_PATCH_VERSION_4), &fw_version)) {
+		ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+			      "eeprom read at offset %d failed",
+			      fw_ptp_cfg_offset + IXGBE_FW_PATCH_VERSION_4);
+		return IXGBE_ERR_EEPROM_VERSION;
+	}
+
+	if (fw_version > 0x5)
+		status = IXGBE_SUCCESS;
+
+fw_version_out:
+	return status;
+}
+
+/**
+ *  ixgbe_verify_lesm_fw_enabled_82599 - Checks LESM FW module state.
+ *  @hw: pointer to hardware structure
+ *
+ *  Returns true if the LESM FW module is present and enabled. Otherwise
+ *  returns false. Smart Speed must be disabled if LESM FW module is enabled.
+ **/
+bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw)
+{
+	bool lesm_enabled = false;
+	u16 fw_offset, fw_lesm_param_offset, fw_lesm_state;
+	s32 status;
+
+	DEBUGFUNC("ixgbe_verify_lesm_fw_enabled_82599");
+
+	/* get the offset to the Firmware Module block */
+	status = hw->eeprom.ops.read(hw, IXGBE_FW_PTR, &fw_offset);
+
+	if ((status != IXGBE_SUCCESS) ||
+	    (fw_offset == 0) || (fw_offset == 0xFFFF))
+		goto out;
+
+	/* get the offset to the LESM Parameters block */
+	status = hw->eeprom.ops.read(hw, (fw_offset +
+				     IXGBE_FW_LESM_PARAMETERS_PTR),
+				     &fw_lesm_param_offset);
+
+	if ((status != IXGBE_SUCCESS) ||
+	    (fw_lesm_param_offset == 0) || (fw_lesm_param_offset == 0xFFFF))
+		goto out;
+
+	/* get the LESM state word */
+	status = hw->eeprom.ops.read(hw, (fw_lesm_param_offset +
+				     IXGBE_FW_LESM_STATE_1),
+				     &fw_lesm_state);
+
+	if ((status == IXGBE_SUCCESS) &&
+	    (fw_lesm_state & IXGBE_FW_LESM_STATE_ENABLED))
+		lesm_enabled = true;
+
+out:
+	return lesm_enabled;
+}
+
+/**
+ *  ixgbe_read_eeprom_buffer_82599 - Read EEPROM word(s) using
+ *  fastest available method
+ *
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in EEPROM to read
+ *  @words: number of words
+ *  @data: word(s) read from the EEPROM
+ *
+ *  Retrieves 16 bit word(s) read from EEPROM
+ **/
+STATIC s32 ixgbe_read_eeprom_buffer_82599(struct ixgbe_hw *hw, u16 offset,
+					  u16 words, u16 *data)
+{
+	struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+	s32 ret_val = IXGBE_ERR_CONFIG;
+
+	DEBUGFUNC("ixgbe_read_eeprom_buffer_82599");
+
+	/*
+	 * If EEPROM is detected and can be addressed using 14 bits,
+	 * use EERD otherwise use bit bang
+	 */
+	if ((eeprom->type == ixgbe_eeprom_spi) &&
+	    (offset + (words - 1) <= IXGBE_EERD_MAX_ADDR))
+		ret_val = ixgbe_read_eerd_buffer_generic(hw, offset, words,
+							 data);
+	else
+		ret_val = ixgbe_read_eeprom_buffer_bit_bang_generic(hw, offset,
+								    words,
+								    data);
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_read_eeprom_82599 - Read EEPROM word using
+ *  fastest available method
+ *
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to read
+ *  @data: word read from the EEPROM
+ *
+ *  Reads a 16 bit word from the EEPROM
+ **/
+STATIC s32 ixgbe_read_eeprom_82599(struct ixgbe_hw *hw,
+				   u16 offset, u16 *data)
+{
+	struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+	s32 ret_val = IXGBE_ERR_CONFIG;
+
+	DEBUGFUNC("ixgbe_read_eeprom_82599");
+
+	/*
+	 * If EEPROM is detected and can be addressed using 14 bits,
+	 * use EERD otherwise use bit bang
+	 */
+	if ((eeprom->type == ixgbe_eeprom_spi) &&
+	    (offset <= IXGBE_EERD_MAX_ADDR))
+		ret_val = ixgbe_read_eerd_generic(hw, offset, data);
+	else
+		ret_val = ixgbe_read_eeprom_bit_bang_generic(hw, offset, data);
+
+	return ret_val;
+}
+
+/**
+ * ixgbe_reset_pipeline_82599 - perform pipeline reset
+ *
+ *  @hw: pointer to hardware structure
+ *
+ * Reset pipeline by asserting Restart_AN together with LMS change to ensure
+ * full pipeline reset.  This function assumes the SW/FW lock is held.
+ **/
+s32 ixgbe_reset_pipeline_82599(struct ixgbe_hw *hw)
+{
+	s32 ret_val;
+	u32 anlp1_reg = 0;
+	u32 i, autoc_reg, autoc2_reg;
+
+	/* Enable link if disabled in NVM */
+	autoc2_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
+	if (autoc2_reg & IXGBE_AUTOC2_LINK_DISABLE_MASK) {
+		autoc2_reg &= ~IXGBE_AUTOC2_LINK_DISABLE_MASK;
+		IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2_reg);
+		IXGBE_WRITE_FLUSH(hw);
+	}
+
+	autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	autoc_reg |= IXGBE_AUTOC_AN_RESTART;
+	/* Write AUTOC register with toggled LMS[2] bit and Restart_AN */
+	IXGBE_WRITE_REG(hw, IXGBE_AUTOC,
+			autoc_reg ^ (0x4 << IXGBE_AUTOC_LMS_SHIFT));
+	/* Wait for AN to leave state 0 */
+	for (i = 0; i < 10; i++) {
+		msec_delay(4);
+		anlp1_reg = IXGBE_READ_REG(hw, IXGBE_ANLP1);
+		if (anlp1_reg & IXGBE_ANLP1_AN_STATE_MASK)
+			break;
+	}
+
+	if (!(anlp1_reg & IXGBE_ANLP1_AN_STATE_MASK)) {
+		DEBUGOUT("auto negotiation not completed\n");
+		ret_val = IXGBE_ERR_RESET_FAILED;
+		goto reset_pipeline_out;
+	}
+
+	ret_val = IXGBE_SUCCESS;
+
+reset_pipeline_out:
+	/* Write AUTOC register with original LMS field and Restart_AN */
+	IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
+	IXGBE_WRITE_FLUSH(hw);
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_read_i2c_byte_82599 - Reads 8 bit word over I2C
+ *  @hw: pointer to hardware structure
+ *  @byte_offset: byte offset to read
+ *  @data: value read
+ *
+ *  Performs byte read operation to SFP module's EEPROM over I2C interface at
+ *  a specified device address.
+ **/
+STATIC s32 ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
+				u8 dev_addr, u8 *data)
+{
+	u32 esdp;
+	s32 status;
+	s32 timeout = 200;
+
+	DEBUGFUNC("ixgbe_read_i2c_byte_82599");
+
+	if (hw->phy.qsfp_shared_i2c_bus == TRUE) {
+		/* Acquire I2C bus ownership. */
+		esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+		esdp |= IXGBE_ESDP_SDP0;
+		IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+		IXGBE_WRITE_FLUSH(hw);
+
+		while (timeout) {
+			esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+			if (esdp & IXGBE_ESDP_SDP1)
+				break;
+
+			msec_delay(5);
+			timeout--;
+		}
+
+		if (!timeout) {
+			DEBUGOUT("Driver can't access resource,"
+				 " acquiring I2C bus timeout.\n");
+			status = IXGBE_ERR_I2C;
+			goto release_i2c_access;
+		}
+	}
+
+	status = ixgbe_read_i2c_byte_generic(hw, byte_offset, dev_addr, data);
+
+release_i2c_access:
+
+	if (hw->phy.qsfp_shared_i2c_bus == TRUE) {
+		/* Release I2C bus ownership. */
+		esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+		esdp &= ~IXGBE_ESDP_SDP0;
+		IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+		IXGBE_WRITE_FLUSH(hw);
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_write_i2c_byte_82599 - Writes 8 bit word over I2C
+ *  @hw: pointer to hardware structure
+ *  @byte_offset: byte offset to write
+ *  @data: value to write
+ *
+ *  Performs byte write operation to SFP module's EEPROM over I2C interface at
+ *  a specified device address.
+ **/
+STATIC s32 ixgbe_write_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
+				 u8 dev_addr, u8 data)
+{
+	u32 esdp;
+	s32 status;
+	s32 timeout = 200;
+
+	DEBUGFUNC("ixgbe_write_i2c_byte_82599");
+
+	if (hw->phy.qsfp_shared_i2c_bus == TRUE) {
+		/* Acquire I2C bus ownership. */
+		esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+		esdp |= IXGBE_ESDP_SDP0;
+		IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+		IXGBE_WRITE_FLUSH(hw);
+
+		while (timeout) {
+			esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+			if (esdp & IXGBE_ESDP_SDP1)
+				break;
+
+			msec_delay(5);
+			timeout--;
+		}
+
+		if (!timeout) {
+			DEBUGOUT("Driver can't access resource,"
+				 " acquiring I2C bus timeout.\n");
+			status = IXGBE_ERR_I2C;
+			goto release_i2c_access;
+		}
+	}
+
+	status = ixgbe_write_i2c_byte_generic(hw, byte_offset, dev_addr, data);
+
+release_i2c_access:
+
+	if (hw->phy.qsfp_shared_i2c_bus == TRUE) {
+		/* Release I2C bus ownership. */
+		esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+		esdp &= ~IXGBE_ESDP_SDP0;
+		IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+		IXGBE_WRITE_FLUSH(hw);
+	}
+
+	return status;
+}
diff --git a/drivers/net/ixgbe/base/ixgbe_82599.h b/drivers/net/ixgbe/base/ixgbe_82599.h
new file mode 100644
index 00000000..c034d3d9
--- /dev/null
+++ b/drivers/net/ixgbe/base/ixgbe_82599.h
@@ -0,0 +1,64 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+    this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in the
+    documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+    contributors may be used to endorse or promote products derived from
+    this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#ifndef _IXGBE_82599_H_
+#define _IXGBE_82599_H_
+
+s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw,
+				      ixgbe_link_speed *speed, bool *autoneg);
+enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw);
+void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
+void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
+void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
+void ixgbe_set_hard_rate_select_speed(struct ixgbe_hw *hw,
+					ixgbe_link_speed speed);
+s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
+				    ixgbe_link_speed speed,
+				    bool autoneg_wait_to_complete);
+s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw,
+			       bool autoneg_wait_to_complete);
+s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, ixgbe_link_speed speed,
+			       bool autoneg_wait_to_complete);
+s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw);
+void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw);
+s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw);
+s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val);
+s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val);
+s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw);
+s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw);
+s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw);
+u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw);
+s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval);
+s32 prot_autoc_read_82599(struct ixgbe_hw *hw, bool *locked, u32 *reg_val);
+s32 prot_autoc_write_82599(struct ixgbe_hw *hw, u32 reg_val, bool locked);
+#endif /* _IXGBE_82599_H_ */
diff --git a/drivers/net/ixgbe/base/ixgbe_api.c b/drivers/net/ixgbe/base/ixgbe_api.c
new file mode 100644
index 00000000..cf1e5169
--- /dev/null
+++ b/drivers/net/ixgbe/base/ixgbe_api.c
@@ -0,0 +1,1664 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+    this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in the
+    documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+    contributors may be used to endorse or promote products derived from
+    this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#include "ixgbe_api.h"
+#include "ixgbe_common.h"
+
+#define IXGBE_EMPTY_PARAM
+
+static const u32 ixgbe_mvals_base[IXGBE_MVALS_IDX_LIMIT] = {
+	IXGBE_MVALS_INIT(IXGBE_EMPTY_PARAM)
+};
+
+static const u32 ixgbe_mvals_X540[IXGBE_MVALS_IDX_LIMIT] = {
+	IXGBE_MVALS_INIT(_X540)
+};
+
+static const u32 ixgbe_mvals_X550[IXGBE_MVALS_IDX_LIMIT] = {
+	IXGBE_MVALS_INIT(_X550)
+};
+
+static const u32 ixgbe_mvals_X550EM_x[IXGBE_MVALS_IDX_LIMIT] = {
+	IXGBE_MVALS_INIT(_X550EM_x)
+};
+
+static const u32 ixgbe_mvals_X550EM_a[IXGBE_MVALS_IDX_LIMIT] = {
+	IXGBE_MVALS_INIT(_X550EM_a)
+};
+
+/**
+ * ixgbe_dcb_get_rtrup2tc - read rtrup2tc reg
+ * @hw: pointer to hardware structure
+ * @map: pointer to u8 arr for returning map
+ *
+ * Read the rtrup2tc HW register and resolve its content into map
+ **/
+void ixgbe_dcb_get_rtrup2tc(struct ixgbe_hw *hw, u8 *map)
+{
+	if (hw->mac.ops.get_rtrup2tc)
+		hw->mac.ops.get_rtrup2tc(hw, map);
+}
+
+/**
+ *  ixgbe_init_shared_code - Initialize the shared code
+ *  @hw: pointer to hardware structure
+ *
+ *  This will assign function pointers and assign the MAC type and PHY code.
+ *  Does not touch the hardware. This function must be called prior to any
+ *  other function in the shared code. The ixgbe_hw structure should be
+ *  memset to 0 prior to calling this function.  The following fields in
+ *  hw structure should be filled in prior to calling this function:
+ *  hw_addr, back, device_id, vendor_id, subsystem_device_id,
+ *  subsystem_vendor_id, and revision_id
+ **/
+s32 ixgbe_init_shared_code(struct ixgbe_hw *hw)
+{
+	s32 status;
+
+	DEBUGFUNC("ixgbe_init_shared_code");
+
+	/*
+	 * Set the mac type
+	 */
+	ixgbe_set_mac_type(hw);
+
+	switch (hw->mac.type) {
+	case ixgbe_mac_82598EB:
+		status = ixgbe_init_ops_82598(hw);
+		break;
+	case ixgbe_mac_82599EB:
+		status = ixgbe_init_ops_82599(hw);
+		break;
+	case ixgbe_mac_X540:
+		status = ixgbe_init_ops_X540(hw);
+		break;
+	case ixgbe_mac_X550:
+		status = ixgbe_init_ops_X550(hw);
+		break;
+	case ixgbe_mac_X550EM_x:
+	case ixgbe_mac_X550EM_a:
+		status = ixgbe_init_ops_X550EM(hw);
+		break;
+	case ixgbe_mac_82599_vf:
+	case ixgbe_mac_X540_vf:
+	case ixgbe_mac_X550_vf:
+	case ixgbe_mac_X550EM_x_vf:
+	case ixgbe_mac_X550EM_a_vf:
+		status = ixgbe_init_ops_vf(hw);
+		break;
+	default:
+		status = IXGBE_ERR_DEVICE_NOT_SUPPORTED;
+		break;
+	}
+	hw->mac.max_link_up_time = IXGBE_LINK_UP_TIME;
+
+	return status;
+}
+
+/**
+ *  ixgbe_set_mac_type - Sets MAC type
+ *  @hw: pointer to the HW structure
+ *
+ *  This function sets the mac type of the adapter based on the
+ *  vendor ID and device ID stored in the hw structure.
+ **/
+s32 ixgbe_set_mac_type(struct ixgbe_hw *hw)
+{
+	s32 ret_val = IXGBE_SUCCESS;
+
+	DEBUGFUNC("ixgbe_set_mac_type\n");
+
+	if (hw->vendor_id != IXGBE_INTEL_VENDOR_ID) {
+		ERROR_REPORT2(IXGBE_ERROR_UNSUPPORTED,
+			     "Unsupported vendor id: %x", hw->vendor_id);
+		return IXGBE_ERR_DEVICE_NOT_SUPPORTED;
+	}
+
+	hw->mvals = ixgbe_mvals_base;
+
+	switch (hw->device_id) {
+	case IXGBE_DEV_ID_82598:
+	case IXGBE_DEV_ID_82598_BX:
+	case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
+	case IXGBE_DEV_ID_82598AF_DUAL_PORT:
+	case IXGBE_DEV_ID_82598AT:
+	case IXGBE_DEV_ID_82598AT2:
+	case IXGBE_DEV_ID_82598EB_CX4:
+	case IXGBE_DEV_ID_82598_CX4_DUAL_PORT:
+	case IXGBE_DEV_ID_82598_DA_DUAL_PORT:
+	case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM:
+	case IXGBE_DEV_ID_82598EB_XF_LR:
+	case IXGBE_DEV_ID_82598EB_SFP_LOM:
+		hw->mac.type = ixgbe_mac_82598EB;
+		break;
+	case IXGBE_DEV_ID_82599_KX4:
+	case IXGBE_DEV_ID_82599_KX4_MEZZ:
+	case IXGBE_DEV_ID_82599_XAUI_LOM:
+	case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
+	case IXGBE_DEV_ID_82599_KR:
+	case IXGBE_DEV_ID_82599_SFP:
+	case IXGBE_DEV_ID_82599_BACKPLANE_FCOE:
+	case IXGBE_DEV_ID_82599_SFP_FCOE:
+	case IXGBE_DEV_ID_82599_SFP_EM:
+	case IXGBE_DEV_ID_82599_SFP_SF2:
+	case IXGBE_DEV_ID_82599_SFP_SF_QP:
+	case IXGBE_DEV_ID_82599_QSFP_SF_QP:
+	case IXGBE_DEV_ID_82599EN_SFP:
+	case IXGBE_DEV_ID_82599_CX4:
+	case IXGBE_DEV_ID_82599_LS:
+	case IXGBE_DEV_ID_82599_T3_LOM:
+		hw->mac.type = ixgbe_mac_82599EB;
+		break;
+	case IXGBE_DEV_ID_82599_VF:
+	case IXGBE_DEV_ID_82599_VF_HV:
+		hw->mac.type = ixgbe_mac_82599_vf;
+		break;
+	case IXGBE_DEV_ID_X540_VF:
+	case IXGBE_DEV_ID_X540_VF_HV:
+		hw->mac.type = ixgbe_mac_X540_vf;
+		hw->mvals = ixgbe_mvals_X540;
+		break;
+	case IXGBE_DEV_ID_X540T:
+	case IXGBE_DEV_ID_X540T1:
+		hw->mac.type = ixgbe_mac_X540;
+		hw->mvals = ixgbe_mvals_X540;
+		break;
+	case IXGBE_DEV_ID_X550T:
+	case IXGBE_DEV_ID_X550T1:
+		hw->mac.type = ixgbe_mac_X550;
+		hw->mvals = ixgbe_mvals_X550;
+		break;
+	case IXGBE_DEV_ID_X550EM_X_KX4:
+	case IXGBE_DEV_ID_X550EM_X_KR:
+	case IXGBE_DEV_ID_X550EM_X_10G_T:
+	case IXGBE_DEV_ID_X550EM_X_1G_T:
+	case IXGBE_DEV_ID_X550EM_X_SFP:
+		hw->mac.type = ixgbe_mac_X550EM_x;
+		hw->mvals = ixgbe_mvals_X550EM_x;
+		break;
+	case IXGBE_DEV_ID_X550EM_A_KR:
+	case IXGBE_DEV_ID_X550EM_A_KR_L:
+	case IXGBE_DEV_ID_X550EM_A_SFP_N:
+	case IXGBE_DEV_ID_X550EM_A_1G_T:
+	case IXGBE_DEV_ID_X550EM_A_1G_T_L:
+	case IXGBE_DEV_ID_X550EM_A_10G_T:
+	case IXGBE_DEV_ID_X550EM_A_QSFP:
+	case IXGBE_DEV_ID_X550EM_A_QSFP_N:
+	case IXGBE_DEV_ID_X550EM_A_SFP:
+		hw->mac.type = ixgbe_mac_X550EM_a;
+		hw->mvals = ixgbe_mvals_X550EM_a;
+		break;
+	case IXGBE_DEV_ID_X550_VF:
+	case IXGBE_DEV_ID_X550_VF_HV:
+		hw->mac.type = ixgbe_mac_X550_vf;
+		hw->mvals = ixgbe_mvals_X550;
+		break;
+	case IXGBE_DEV_ID_X550EM_X_VF:
+	case IXGBE_DEV_ID_X550EM_X_VF_HV:
+		hw->mac.type = ixgbe_mac_X550EM_x_vf;
+		hw->mvals = ixgbe_mvals_X550EM_x;
+		break;
+	case IXGBE_DEV_ID_X550EM_A_VF:
+	case IXGBE_DEV_ID_X550EM_A_VF_HV:
+		hw->mac.type = ixgbe_mac_X550EM_a_vf;
+		hw->mvals = ixgbe_mvals_X550EM_a;
+		break;
+	default:
+		ret_val = IXGBE_ERR_DEVICE_NOT_SUPPORTED;
+		ERROR_REPORT2(IXGBE_ERROR_UNSUPPORTED,
+			     "Unsupported device id: %x",
+			     hw->device_id);
+		break;
+	}
+
+	DEBUGOUT2("ixgbe_set_mac_type found mac: %d, returns: %d\n",
+		  hw->mac.type, ret_val);
+	return ret_val;
+}
+
+/**
+ *  ixgbe_init_hw - Initialize the hardware
+ *  @hw: pointer to hardware structure
+ *
+ *  Initialize the hardware by resetting and then starting the hardware
+ **/
+s32 ixgbe_init_hw(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.init_hw, (hw),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_reset_hw - Performs a hardware reset
+ *  @hw: pointer to hardware structure
+ *
+ *  Resets the hardware by resetting the transmit and receive units, masks and
+ *  clears all interrupts, performs a PHY reset, and performs a MAC reset
+ **/
+s32 ixgbe_reset_hw(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.reset_hw, (hw),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_start_hw - Prepares hardware for Rx/Tx
+ *  @hw: pointer to hardware structure
+ *
+ *  Starts the hardware by filling the bus info structure and media type,
+ *  clears all on chip counters, initializes receive address registers,
+ *  multicast table, VLAN filter table, calls routine to setup link and
+ *  flow control settings, and leaves transmit and receive units disabled
+ *  and uninitialized.
+ **/
+s32 ixgbe_start_hw(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.start_hw, (hw),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_enable_relaxed_ordering - Enables tx relaxed ordering,
+ *  which is disabled by default in ixgbe_start_hw();
+ *
+ *  @hw: pointer to hardware structure
+ *
+ *   Enable relaxed ordering;
+ **/
+void ixgbe_enable_relaxed_ordering(struct ixgbe_hw *hw)
+{
+	if (hw->mac.ops.enable_relaxed_ordering)
+		hw->mac.ops.enable_relaxed_ordering(hw);
+}
+
+/**
+ *  ixgbe_clear_hw_cntrs - Clear hardware counters
+ *  @hw: pointer to hardware structure
+ *
+ *  Clears all hardware statistics counters by reading them from the hardware
+ *  Statistics counters are clear on read.
+ **/
+s32 ixgbe_clear_hw_cntrs(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.clear_hw_cntrs, (hw),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_get_media_type - Get media type
+ *  @hw: pointer to hardware structure
+ *
+ *  Returns the media type (fiber, copper, backplane)
+ **/
+enum ixgbe_media_type ixgbe_get_media_type(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.get_media_type, (hw),
+			       ixgbe_media_type_unknown);
+}
+
+/**
+ *  ixgbe_get_mac_addr - Get MAC address
+ *  @hw: pointer to hardware structure
+ *  @mac_addr: Adapter MAC address
+ *
+ *  Reads the adapter's MAC address from the first Receive Address Register
+ *  (RAR0) A reset of the adapter must have been performed prior to calling
+ *  this function in order for the MAC address to have been loaded from the
+ *  EEPROM into RAR0
+ **/
+s32 ixgbe_get_mac_addr(struct ixgbe_hw *hw, u8 *mac_addr)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.get_mac_addr,
+			       (hw, mac_addr), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_get_san_mac_addr - Get SAN MAC address
+ *  @hw: pointer to hardware structure
+ *  @san_mac_addr: SAN MAC address
+ *
+ *  Reads the SAN MAC address from the EEPROM, if it's available.  This is
+ *  per-port, so set_lan_id() must be called before reading the addresses.
+ **/
+s32 ixgbe_get_san_mac_addr(struct ixgbe_hw *hw, u8 *san_mac_addr)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.get_san_mac_addr,
+			       (hw, san_mac_addr), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_set_san_mac_addr - Write a SAN MAC address
+ *  @hw: pointer to hardware structure
+ *  @san_mac_addr: SAN MAC address
+ *
+ *  Writes A SAN MAC address to the EEPROM.
+ **/
+s32 ixgbe_set_san_mac_addr(struct ixgbe_hw *hw, u8 *san_mac_addr)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.set_san_mac_addr,
+			       (hw, san_mac_addr), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_get_device_caps - Get additional device capabilities
+ *  @hw: pointer to hardware structure
+ *  @device_caps: the EEPROM word for device capabilities
+ *
+ *  Reads the extra device capabilities from the EEPROM
+ **/
+s32 ixgbe_get_device_caps(struct ixgbe_hw *hw, u16 *device_caps)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.get_device_caps,
+			       (hw, device_caps), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_get_wwn_prefix - Get alternative WWNN/WWPN prefix from the EEPROM
+ *  @hw: pointer to hardware structure
+ *  @wwnn_prefix: the alternative WWNN prefix
+ *  @wwpn_prefix: the alternative WWPN prefix
+ *
+ *  This function will read the EEPROM from the alternative SAN MAC address
+ *  block to check the support for the alternative WWNN/WWPN prefix support.
+ **/
+s32 ixgbe_get_wwn_prefix(struct ixgbe_hw *hw, u16 *wwnn_prefix,
+			 u16 *wwpn_prefix)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.get_wwn_prefix,
+			       (hw, wwnn_prefix, wwpn_prefix),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_get_fcoe_boot_status -  Get FCOE boot status from EEPROM
+ *  @hw: pointer to hardware structure
+ *  @bs: the fcoe boot status
+ *
+ *  This function will read the FCOE boot status from the iSCSI FCOE block
+ **/
+s32 ixgbe_get_fcoe_boot_status(struct ixgbe_hw *hw, u16 *bs)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.get_fcoe_boot_status,
+			       (hw, bs),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_get_bus_info - Set PCI bus info
+ *  @hw: pointer to hardware structure
+ *
+ *  Sets the PCI bus info (speed, width, type) within the ixgbe_hw structure
+ **/
+s32 ixgbe_get_bus_info(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.get_bus_info, (hw),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_get_num_of_tx_queues - Get Tx queues
+ *  @hw: pointer to hardware structure
+ *
+ *  Returns the number of transmit queues for the given adapter.
+ **/
+u32 ixgbe_get_num_of_tx_queues(struct ixgbe_hw *hw)
+{
+	return hw->mac.max_tx_queues;
+}
+
+/**
+ *  ixgbe_get_num_of_rx_queues - Get Rx queues
+ *  @hw: pointer to hardware structure
+ *
+ *  Returns the number of receive queues for the given adapter.
+ **/
+u32 ixgbe_get_num_of_rx_queues(struct ixgbe_hw *hw)
+{
+	return hw->mac.max_rx_queues;
+}
+
+/**
+ *  ixgbe_stop_adapter - Disable Rx/Tx units
+ *  @hw: pointer to hardware structure
+ *
+ *  Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts,
+ *  disables transmit and receive units. The adapter_stopped flag is used by
+ *  the shared code and drivers to determine if the adapter is in a stopped
+ *  state and should not touch the hardware.
+ **/
+s32 ixgbe_stop_adapter(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.stop_adapter, (hw),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_read_pba_string - Reads part number string from EEPROM
+ *  @hw: pointer to hardware structure
+ *  @pba_num: stores the part number string from the EEPROM
+ *  @pba_num_size: part number string buffer length
+ *
+ *  Reads the part number string from the EEPROM.
+ **/
+s32 ixgbe_read_pba_string(struct ixgbe_hw *hw, u8 *pba_num, u32 pba_num_size)
+{
+	return ixgbe_read_pba_string_generic(hw, pba_num, pba_num_size);
+}
+
+/**
+ *  ixgbe_read_pba_num - Reads part number from EEPROM
+ *  @hw: pointer to hardware structure
+ *  @pba_num: stores the part number from the EEPROM
+ *
+ *  Reads the part number from the EEPROM.
+ **/
+s32 ixgbe_read_pba_num(struct ixgbe_hw *hw, u32 *pba_num)
+{
+	return ixgbe_read_pba_num_generic(hw, pba_num);
+}
+
+/**
+ *  ixgbe_identify_phy - Get PHY type
+ *  @hw: pointer to hardware structure
+ *
+ *  Determines the physical layer module found on the current adapter.
+ **/
+s32 ixgbe_identify_phy(struct ixgbe_hw *hw)
+{
+	s32 status = IXGBE_SUCCESS;
+
+	if (hw->phy.type == ixgbe_phy_unknown) {
+		status = ixgbe_call_func(hw, hw->phy.ops.identify, (hw),
+					 IXGBE_NOT_IMPLEMENTED);
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_reset_phy - Perform a PHY reset
+ *  @hw: pointer to hardware structure
+ **/
+s32 ixgbe_reset_phy(struct ixgbe_hw *hw)
+{
+	s32 status = IXGBE_SUCCESS;
+
+	if (hw->phy.type == ixgbe_phy_unknown) {
+		if (ixgbe_identify_phy(hw) != IXGBE_SUCCESS)
+			status = IXGBE_ERR_PHY;
+	}
+
+	if (status == IXGBE_SUCCESS) {
+		status = ixgbe_call_func(hw, hw->phy.ops.reset, (hw),
+					 IXGBE_NOT_IMPLEMENTED);
+	}
+	return status;
+}
+
+/**
+ *  ixgbe_get_phy_firmware_version -
+ *  @hw: pointer to hardware structure
+ *  @firmware_version: pointer to firmware version
+ **/
+s32 ixgbe_get_phy_firmware_version(struct ixgbe_hw *hw, u16 *firmware_version)
+{
+	s32 status = IXGBE_SUCCESS;
+
+	status = ixgbe_call_func(hw, hw->phy.ops.get_firmware_version,
+				 (hw, firmware_version),
+				 IXGBE_NOT_IMPLEMENTED);
+	return status;
+}
+
+/**
+ *  ixgbe_read_phy_reg - Read PHY register
+ *  @hw: pointer to hardware structure
+ *  @reg_addr: 32 bit address of PHY register to read
+ *  @phy_data: Pointer to read data from PHY register
+ *
+ *  Reads a value from a specified PHY register
+ **/
+s32 ixgbe_read_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
+		       u16 *phy_data)
+{
+	if (hw->phy.id == 0)
+		ixgbe_identify_phy(hw);
+
+	return ixgbe_call_func(hw, hw->phy.ops.read_reg, (hw, reg_addr,
+			       device_type, phy_data), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_write_phy_reg - Write PHY register
+ *  @hw: pointer to hardware structure
+ *  @reg_addr: 32 bit PHY register to write
+ *  @phy_data: Data to write to the PHY register
+ *
+ *  Writes a value to specified PHY register
+ **/
+s32 ixgbe_write_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
+			u16 phy_data)
+{
+	if (hw->phy.id == 0)
+		ixgbe_identify_phy(hw);
+
+	return ixgbe_call_func(hw, hw->phy.ops.write_reg, (hw, reg_addr,
+			       device_type, phy_data), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_setup_phy_link - Restart PHY autoneg
+ *  @hw: pointer to hardware structure
+ *
+ *  Restart autonegotiation and PHY and waits for completion.
+ **/
+s32 ixgbe_setup_phy_link(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->phy.ops.setup_link, (hw),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_setup_internal_phy - Configure integrated PHY
+ * @hw: pointer to hardware structure
+ *
+ * Reconfigure the integrated PHY in order to enable talk to the external PHY.
+ * Returns success if not implemented, since nothing needs to be done in this
+ * case.
+ */
+s32 ixgbe_setup_internal_phy(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->phy.ops.setup_internal_link, (hw),
+			       IXGBE_SUCCESS);
+}
+
+/**
+ *  ixgbe_check_phy_link - Determine link and speed status
+ *  @hw: pointer to hardware structure
+ *
+ *  Reads a PHY register to determine if link is up and the current speed for
+ *  the PHY.
+ **/
+s32 ixgbe_check_phy_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+			 bool *link_up)
+{
+	return ixgbe_call_func(hw, hw->phy.ops.check_link, (hw, speed,
+			       link_up), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_setup_phy_link_speed - Set auto advertise
+ *  @hw: pointer to hardware structure
+ *  @speed: new link speed
+ *
+ *  Sets the auto advertised capabilities
+ **/
+s32 ixgbe_setup_phy_link_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed,
+			       bool autoneg_wait_to_complete)
+{
+	return ixgbe_call_func(hw, hw->phy.ops.setup_link_speed, (hw, speed,
+			       autoneg_wait_to_complete),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_set_phy_power - Control the phy power state
+ * @hw: pointer to hardware structure
+ * @on: true for on, false for off
+ */
+s32 ixgbe_set_phy_power(struct ixgbe_hw *hw, bool on)
+{
+	return ixgbe_call_func(hw, hw->phy.ops.set_phy_power, (hw, on),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_check_link - Get link and speed status
+ *  @hw: pointer to hardware structure
+ *
+ *  Reads the links register to determine if link is up and the current speed
+ **/
+s32 ixgbe_check_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+		     bool *link_up, bool link_up_wait_to_complete)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.check_link, (hw, speed,
+			       link_up, link_up_wait_to_complete),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_disable_tx_laser - Disable Tx laser
+ *  @hw: pointer to hardware structure
+ *
+ *  If the driver needs to disable the laser on SFI optics.
+ **/
+void ixgbe_disable_tx_laser(struct ixgbe_hw *hw)
+{
+	if (hw->mac.ops.disable_tx_laser)
+		hw->mac.ops.disable_tx_laser(hw);
+}
+
+/**
+ *  ixgbe_enable_tx_laser - Enable Tx laser
+ *  @hw: pointer to hardware structure
+ *
+ *  If the driver needs to enable the laser on SFI optics.
+ **/
+void ixgbe_enable_tx_laser(struct ixgbe_hw *hw)
+{
+	if (hw->mac.ops.enable_tx_laser)
+		hw->mac.ops.enable_tx_laser(hw);
+}
+
+/**
+ *  ixgbe_flap_tx_laser - flap Tx laser to start autotry process
+ *  @hw: pointer to hardware structure
+ *
+ *  When the driver changes the link speeds that it can support then
+ *  flap the tx laser to alert the link partner to start autotry
+ *  process on its end.
+ **/
+void ixgbe_flap_tx_laser(struct ixgbe_hw *hw)
+{
+	if (hw->mac.ops.flap_tx_laser)
+		hw->mac.ops.flap_tx_laser(hw);
+}
+
+/**
+ *  ixgbe_setup_link - Set link speed
+ *  @hw: pointer to hardware structure
+ *  @speed: new link speed
+ *
+ *  Configures link settings.  Restarts the link.
+ *  Performs autonegotiation if needed.
+ **/
+s32 ixgbe_setup_link(struct ixgbe_hw *hw, ixgbe_link_speed speed,
+		     bool autoneg_wait_to_complete)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.setup_link, (hw, speed,
+			       autoneg_wait_to_complete),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_setup_mac_link - Set link speed
+ *  @hw: pointer to hardware structure
+ *  @speed: new link speed
+ *
+ *  Configures link settings.  Restarts the link.
+ *  Performs autonegotiation if needed.
+ **/
+s32 ixgbe_setup_mac_link(struct ixgbe_hw *hw, ixgbe_link_speed speed,
+			 bool autoneg_wait_to_complete)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.setup_mac_link, (hw, speed,
+			       autoneg_wait_to_complete),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_get_link_capabilities - Returns link capabilities
+ *  @hw: pointer to hardware structure
+ *
+ *  Determines the link capabilities of the current configuration.
+ **/
+s32 ixgbe_get_link_capabilities(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+				bool *autoneg)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.get_link_capabilities, (hw,
+			       speed, autoneg), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_led_on - Turn on LEDs
+ *  @hw: pointer to hardware structure
+ *  @index: led number to turn on
+ *
+ *  Turns on the software controllable LEDs.
+ **/
+s32 ixgbe_led_on(struct ixgbe_hw *hw, u32 index)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.led_on, (hw, index),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_led_off - Turn off LEDs
+ *  @hw: pointer to hardware structure
+ *  @index: led number to turn off
+ *
+ *  Turns off the software controllable LEDs.
+ **/
+s32 ixgbe_led_off(struct ixgbe_hw *hw, u32 index)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.led_off, (hw, index),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_blink_led_start - Blink LEDs
+ *  @hw: pointer to hardware structure
+ *  @index: led number to blink
+ *
+ *  Blink LED based on index.
+ **/
+s32 ixgbe_blink_led_start(struct ixgbe_hw *hw, u32 index)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.blink_led_start, (hw, index),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_blink_led_stop - Stop blinking LEDs
+ *  @hw: pointer to hardware structure
+ *
+ *  Stop blinking LED based on index.
+ **/
+s32 ixgbe_blink_led_stop(struct ixgbe_hw *hw, u32 index)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.blink_led_stop, (hw, index),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_init_eeprom_params - Initialize EEPROM parameters
+ *  @hw: pointer to hardware structure
+ *
+ *  Initializes the EEPROM parameters ixgbe_eeprom_info within the
+ *  ixgbe_hw struct in order to set up EEPROM access.
+ **/
+s32 ixgbe_init_eeprom_params(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->eeprom.ops.init_params, (hw),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+
+/**
+ *  ixgbe_write_eeprom - Write word to EEPROM
+ *  @hw: pointer to hardware structure
+ *  @offset: offset within the EEPROM to be written to
+ *  @data: 16 bit word to be written to the EEPROM
+ *
+ *  Writes 16 bit value to EEPROM. If ixgbe_eeprom_update_checksum is not
+ *  called after this function, the EEPROM will most likely contain an
+ *  invalid checksum.
+ **/
+s32 ixgbe_write_eeprom(struct ixgbe_hw *hw, u16 offset, u16 data)
+{
+	return ixgbe_call_func(hw, hw->eeprom.ops.write, (hw, offset, data),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_write_eeprom_buffer - Write word(s) to EEPROM
+ *  @hw: pointer to hardware structure
+ *  @offset: offset within the EEPROM to be written to
+ *  @data: 16 bit word(s) to be written to the EEPROM
+ *  @words: number of words
+ *
+ *  Writes 16 bit word(s) to EEPROM. If ixgbe_eeprom_update_checksum is not
+ *  called after this function, the EEPROM will most likely contain an
+ *  invalid checksum.
+ **/
+s32 ixgbe_write_eeprom_buffer(struct ixgbe_hw *hw, u16 offset, u16 words,
+			      u16 *data)
+{
+	return ixgbe_call_func(hw, hw->eeprom.ops.write_buffer,
+			       (hw, offset, words, data),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_read_eeprom - Read word from EEPROM
+ *  @hw: pointer to hardware structure
+ *  @offset: offset within the EEPROM to be read
+ *  @data: read 16 bit value from EEPROM
+ *
+ *  Reads 16 bit value from EEPROM
+ **/
+s32 ixgbe_read_eeprom(struct ixgbe_hw *hw, u16 offset, u16 *data)
+{
+	return ixgbe_call_func(hw, hw->eeprom.ops.read, (hw, offset, data),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_read_eeprom_buffer - Read word(s) from EEPROM
+ *  @hw: pointer to hardware structure
+ *  @offset: offset within the EEPROM to be read
+ *  @data: read 16 bit word(s) from EEPROM
+ *  @words: number of words
+ *
+ *  Reads 16 bit word(s) from EEPROM
+ **/
+s32 ixgbe_read_eeprom_buffer(struct ixgbe_hw *hw, u16 offset,
+			     u16 words, u16 *data)
+{
+	return ixgbe_call_func(hw, hw->eeprom.ops.read_buffer,
+			       (hw, offset, words, data),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_validate_eeprom_checksum - Validate EEPROM checksum
+ *  @hw: pointer to hardware structure
+ *  @checksum_val: calculated checksum
+ *
+ *  Performs checksum calculation and validates the EEPROM checksum
+ **/
+s32 ixgbe_validate_eeprom_checksum(struct ixgbe_hw *hw, u16 *checksum_val)
+{
+	return ixgbe_call_func(hw, hw->eeprom.ops.validate_checksum,
+			       (hw, checksum_val), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_eeprom_update_checksum - Updates the EEPROM checksum
+ *  @hw: pointer to hardware structure
+ **/
+s32 ixgbe_update_eeprom_checksum(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->eeprom.ops.update_checksum, (hw),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_insert_mac_addr - Find a RAR for this mac address
+ *  @hw: pointer to hardware structure
+ *  @addr: Address to put into receive address register
+ *  @vmdq: VMDq pool to assign
+ *
+ *  Puts an ethernet address into a receive address register, or
+ *  finds the rar that it is aleady in; adds to the pool list
+ **/
+s32 ixgbe_insert_mac_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.insert_mac_addr,
+			       (hw, addr, vmdq),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_set_rar - Set Rx address register
+ *  @hw: pointer to hardware structure
+ *  @index: Receive address register to write
+ *  @addr: Address to put into receive address register
+ *  @vmdq: VMDq "set"
+ *  @enable_addr: set flag that address is active
+ *
+ *  Puts an ethernet address into a receive address register.
+ **/
+s32 ixgbe_set_rar(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
+		  u32 enable_addr)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.set_rar, (hw, index, addr, vmdq,
+			       enable_addr), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_clear_rar - Clear Rx address register
+ *  @hw: pointer to hardware structure
+ *  @index: Receive address register to write
+ *
+ *  Puts an ethernet address into a receive address register.
+ **/
+s32 ixgbe_clear_rar(struct ixgbe_hw *hw, u32 index)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.clear_rar, (hw, index),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_set_vmdq - Associate a VMDq index with a receive address
+ *  @hw: pointer to hardware structure
+ *  @rar: receive address register index to associate with VMDq index
+ *  @vmdq: VMDq set or pool index
+ **/
+s32 ixgbe_set_vmdq(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.set_vmdq, (hw, rar, vmdq),
+			       IXGBE_NOT_IMPLEMENTED);
+
+}
+
+/**
+ *  ixgbe_set_vmdq_san_mac - Associate VMDq index 127 with a receive address
+ *  @hw: pointer to hardware structure
+ *  @vmdq: VMDq default pool index
+ **/
+s32 ixgbe_set_vmdq_san_mac(struct ixgbe_hw *hw, u32 vmdq)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.set_vmdq_san_mac,
+			       (hw, vmdq), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_clear_vmdq - Disassociate a VMDq index from a receive address
+ *  @hw: pointer to hardware structure
+ *  @rar: receive address register index to disassociate with VMDq index
+ *  @vmdq: VMDq set or pool index
+ **/
+s32 ixgbe_clear_vmdq(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.clear_vmdq, (hw, rar, vmdq),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_init_rx_addrs - Initializes receive address filters.
+ *  @hw: pointer to hardware structure
+ *
+ *  Places the MAC address in receive address register 0 and clears the rest
+ *  of the receive address registers. Clears the multicast table. Assumes
+ *  the receiver is in reset when the routine is called.
+ **/
+s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.init_rx_addrs, (hw),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_get_num_rx_addrs - Returns the number of RAR entries.
+ *  @hw: pointer to hardware structure
+ **/
+u32 ixgbe_get_num_rx_addrs(struct ixgbe_hw *hw)
+{
+	return hw->mac.num_rar_entries;
+}
+
+/**
+ *  ixgbe_update_uc_addr_list - Updates the MAC's list of secondary addresses
+ *  @hw: pointer to hardware structure
+ *  @addr_list: the list of new multicast addresses
+ *  @addr_count: number of addresses
+ *  @func: iterator function to walk the multicast address list
+ *
+ *  The given list replaces any existing list. Clears the secondary addrs from
+ *  receive address registers. Uses unused receive address registers for the
+ *  first secondary addresses, and falls back to promiscuous mode as needed.
+ **/
+s32 ixgbe_update_uc_addr_list(struct ixgbe_hw *hw, u8 *addr_list,
+			      u32 addr_count, ixgbe_mc_addr_itr func)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.update_uc_addr_list, (hw,
+			       addr_list, addr_count, func),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_update_mc_addr_list - Updates the MAC's list of multicast addresses
+ *  @hw: pointer to hardware structure
+ *  @mc_addr_list: the list of new multicast addresses
+ *  @mc_addr_count: number of addresses
+ *  @func: iterator function to walk the multicast address list
+ *
+ *  The given list replaces any existing list. Clears the MC addrs from receive
+ *  address registers and the multicast table. Uses unused receive address
+ *  registers for the first multicast addresses, and hashes the rest into the
+ *  multicast table.
+ **/
+s32 ixgbe_update_mc_addr_list(struct ixgbe_hw *hw, u8 *mc_addr_list,
+			      u32 mc_addr_count, ixgbe_mc_addr_itr func,
+			      bool clear)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.update_mc_addr_list, (hw,
+			       mc_addr_list, mc_addr_count, func, clear),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_enable_mc - Enable multicast address in RAR
+ *  @hw: pointer to hardware structure
+ *
+ *  Enables multicast address in RAR and the use of the multicast hash table.
+ **/
+s32 ixgbe_enable_mc(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.enable_mc, (hw),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_disable_mc - Disable multicast address in RAR
+ *  @hw: pointer to hardware structure
+ *
+ *  Disables multicast address in RAR and the use of the multicast hash table.
+ **/
+s32 ixgbe_disable_mc(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.disable_mc, (hw),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_clear_vfta - Clear VLAN filter table
+ *  @hw: pointer to hardware structure
+ *
+ *  Clears the VLAN filer table, and the VMDq index associated with the filter
+ **/
+s32 ixgbe_clear_vfta(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.clear_vfta, (hw),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_set_vfta - Set VLAN filter table
+ *  @hw: pointer to hardware structure
+ *  @vlan: VLAN id to write to VLAN filter
+ *  @vind: VMDq output index that maps queue to VLAN id in VFTA
+ *  @vlan_on: boolean flag to turn on/off VLAN in VFTA
+ *
+ *  Turn on/off specified VLAN in the VLAN filter table.
+ **/
+s32 ixgbe_set_vfta(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.set_vfta, (hw, vlan, vind,
+			       vlan_on), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_set_vlvf - Set VLAN Pool Filter
+ *  @hw: pointer to hardware structure
+ *  @vlan: VLAN id to write to VLAN filter
+ *  @vind: VMDq output index that maps queue to VLAN id in VFVFB
+ *  @vlan_on: boolean flag to turn on/off VLAN in VFVF
+ *  @vfta_changed: pointer to boolean flag which indicates whether VFTA
+ *                 should be changed
+ *
+ *  Turn on/off specified bit in VLVF table.
+ **/
+s32 ixgbe_set_vlvf(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on,
+		    bool *vfta_changed)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.set_vlvf, (hw, vlan, vind,
+			       vlan_on, vfta_changed), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_fc_enable - Enable flow control
+ *  @hw: pointer to hardware structure
+ *
+ *  Configures the flow control settings based on SW configuration.
+ **/
+s32 ixgbe_fc_enable(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.fc_enable, (hw),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_setup_fc - Set up flow control
+ *  @hw: pointer to hardware structure
+ *
+ *  Called at init time to set up flow control.
+ **/
+s32 ixgbe_setup_fc(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.setup_fc, (hw),
+		IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_set_fw_drv_ver - Try to send the driver version number FW
+ * @hw: pointer to hardware structure
+ * @maj: driver major number to be sent to firmware
+ * @min: driver minor number to be sent to firmware
+ * @build: driver build number to be sent to firmware
+ * @ver: driver version number to be sent to firmware
+ **/
+s32 ixgbe_set_fw_drv_ver(struct ixgbe_hw *hw, u8 maj, u8 min, u8 build,
+			 u8 ver)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.set_fw_drv_ver, (hw, maj, min,
+			       build, ver), IXGBE_NOT_IMPLEMENTED);
+}
+
+
+/**
+ *  ixgbe_get_thermal_sensor_data - Gathers thermal sensor data
+ *  @hw: pointer to hardware structure
+ *
+ *  Updates the temperatures in mac.thermal_sensor_data
+ **/
+s32 ixgbe_get_thermal_sensor_data(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.get_thermal_sensor_data, (hw),
+				IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_init_thermal_sensor_thresh - Inits thermal sensor thresholds
+ *  @hw: pointer to hardware structure
+ *
+ *  Inits the thermal sensor thresholds according to the NVM map
+ **/
+s32 ixgbe_init_thermal_sensor_thresh(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.init_thermal_sensor_thresh, (hw),
+				IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_dmac_config - Configure DMA Coalescing registers.
+ *  @hw: pointer to hardware structure
+ *
+ *  Configure DMA coalescing. If enabling dmac, dmac is activated.
+ *  When disabling dmac, dmac enable dmac bit is cleared.
+ **/
+s32 ixgbe_dmac_config(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.dmac_config, (hw),
+				IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_dmac_update_tcs - Configure DMA Coalescing registers.
+ *  @hw: pointer to hardware structure
+ *
+ *  Disables dmac, updates per TC settings, and then enable dmac.
+ **/
+s32 ixgbe_dmac_update_tcs(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.dmac_update_tcs, (hw),
+				IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_dmac_config_tcs - Configure DMA Coalescing registers.
+ *  @hw: pointer to hardware structure
+ *
+ *  Configure DMA coalescing threshold per TC and set high priority bit for
+ *  FCOE TC. The dmac enable bit must be cleared before configuring.
+ **/
+s32 ixgbe_dmac_config_tcs(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.dmac_config_tcs, (hw),
+				IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_setup_eee - Enable/disable EEE support
+ *  @hw: pointer to the HW structure
+ *  @enable_eee: boolean flag to enable EEE
+ *
+ *  Enable/disable EEE based on enable_ee flag.
+ *  Auto-negotiation must be started after BASE-T EEE bits in PHY register 7.3C
+ *  are modified.
+ *
+ **/
+s32 ixgbe_setup_eee(struct ixgbe_hw *hw, bool enable_eee)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.setup_eee, (hw, enable_eee),
+			IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_set_source_address_pruning - Enable/Disable source address pruning
+ * @hw: pointer to hardware structure
+ * @enbale: enable or disable source address pruning
+ * @pool: Rx pool - Rx pool to toggle source address pruning
+ **/
+void ixgbe_set_source_address_pruning(struct ixgbe_hw *hw, bool enable,
+				      unsigned int pool)
+{
+	if (hw->mac.ops.set_source_address_pruning)
+		hw->mac.ops.set_source_address_pruning(hw, enable, pool);
+}
+
+/**
+ *  ixgbe_set_ethertype_anti_spoofing - Enable/Disable Ethertype anti-spoofing
+ *  @hw: pointer to hardware structure
+ *  @enable: enable or disable switch for Ethertype anti-spoofing
+ *  @vf: Virtual Function pool - VF Pool to set for Ethertype anti-spoofing
+ *
+ **/
+void ixgbe_set_ethertype_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf)
+{
+	if (hw->mac.ops.set_ethertype_anti_spoofing)
+		hw->mac.ops.set_ethertype_anti_spoofing(hw, enable, vf);
+}
+
+/**
+ *  ixgbe_read_iosf_sb_reg - Read 32 bit PHY register
+ *  @hw: pointer to hardware structure
+ *  @reg_addr: 32 bit address of PHY register to read
+ *  @device_type: type of device you want to communicate with
+ *  @phy_data: Pointer to read data from PHY register
+ *
+ *  Reads a value from a specified PHY register
+ **/
+s32 ixgbe_read_iosf_sb_reg(struct ixgbe_hw *hw, u32 reg_addr,
+			   u32 device_type, u32 *phy_data)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.read_iosf_sb_reg, (hw, reg_addr,
+			       device_type, phy_data), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_write_iosf_sb_reg - Write 32 bit register through IOSF Sideband
+ *  @hw: pointer to hardware structure
+ *  @reg_addr: 32 bit PHY register to write
+ *  @device_type: type of device you want to communicate with
+ *  @phy_data: Data to write to the PHY register
+ *
+ *  Writes a value to specified PHY register
+ **/
+s32 ixgbe_write_iosf_sb_reg(struct ixgbe_hw *hw, u32 reg_addr,
+			    u32 device_type, u32 phy_data)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.write_iosf_sb_reg, (hw, reg_addr,
+			       device_type, phy_data), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_disable_mdd - Disable malicious driver detection
+ *  @hw: pointer to hardware structure
+ *
+ **/
+void ixgbe_disable_mdd(struct ixgbe_hw *hw)
+{
+	if (hw->mac.ops.disable_mdd)
+		hw->mac.ops.disable_mdd(hw);
+}
+
+/**
+ *  ixgbe_enable_mdd - Enable malicious driver detection
+ *  @hw: pointer to hardware structure
+ *
+ **/
+void ixgbe_enable_mdd(struct ixgbe_hw *hw)
+{
+	if (hw->mac.ops.enable_mdd)
+		hw->mac.ops.enable_mdd(hw);
+}
+
+/**
+ *  ixgbe_mdd_event - Handle malicious driver detection event
+ *  @hw: pointer to hardware structure
+ *  @vf_bitmap: vf bitmap of malicious vfs
+ *
+ **/
+void ixgbe_mdd_event(struct ixgbe_hw *hw, u32 *vf_bitmap)
+{
+	if (hw->mac.ops.mdd_event)
+		hw->mac.ops.mdd_event(hw, vf_bitmap);
+}
+
+/**
+ *  ixgbe_restore_mdd_vf - Restore VF that was disabled during malicious driver
+ *  detection event
+ *  @hw: pointer to hardware structure
+ *  @vf: vf index
+ *
+ **/
+void ixgbe_restore_mdd_vf(struct ixgbe_hw *hw, u32 vf)
+{
+	if (hw->mac.ops.restore_mdd_vf)
+		hw->mac.ops.restore_mdd_vf(hw, vf);
+}
+
+/**
+ *  ixgbe_enter_lplu - Transition to low power states
+ *  @hw: pointer to hardware structure
+ *
+ * Configures Low Power Link Up on transition to low power states
+ * (from D0 to non-D0).
+ **/
+s32 ixgbe_enter_lplu(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->phy.ops.enter_lplu, (hw),
+				IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_handle_lasi - Handle external Base T PHY interrupt
+ * @hw: pointer to hardware structure
+ *
+ * Handle external Base T PHY interrupt. If high temperature
+ * failure alarm then return error, else if link status change
+ * then setup internal/external PHY link
+ *
+ * Return IXGBE_ERR_OVERTEMP if interrupt is high temperature
+ * failure alarm, else return PHY access status.
+ */
+s32 ixgbe_handle_lasi(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->phy.ops.handle_lasi, (hw),
+				IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_read_analog_reg8 - Reads 8 bit analog register
+ *  @hw: pointer to hardware structure
+ *  @reg: analog register to read
+ *  @val: read value
+ *
+ *  Performs write operation to analog register specified.
+ **/
+s32 ixgbe_read_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 *val)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.read_analog_reg8, (hw, reg,
+			       val), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_write_analog_reg8 - Writes 8 bit analog register
+ *  @hw: pointer to hardware structure
+ *  @reg: analog register to write
+ *  @val: value to write
+ *
+ *  Performs write operation to Atlas analog register specified.
+ **/
+s32 ixgbe_write_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 val)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.write_analog_reg8, (hw, reg,
+			       val), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_init_uta_tables - Initializes Unicast Table Arrays.
+ *  @hw: pointer to hardware structure
+ *
+ *  Initializes the Unicast Table Arrays to zero on device load.  This
+ *  is part of the Rx init addr execution path.
+ **/
+s32 ixgbe_init_uta_tables(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.init_uta_tables, (hw),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_read_i2c_byte - Reads 8 bit word over I2C at specified device address
+ *  @hw: pointer to hardware structure
+ *  @byte_offset: byte offset to read
+ *  @dev_addr: I2C bus address to read from
+ *  @data: value read
+ *
+ *  Performs byte read operation to SFP module's EEPROM over I2C interface.
+ **/
+s32 ixgbe_read_i2c_byte(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr,
+			u8 *data)
+{
+	return ixgbe_call_func(hw, hw->phy.ops.read_i2c_byte, (hw, byte_offset,
+			       dev_addr, data), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_read_i2c_byte_unlocked - Reads 8 bit word via I2C from device address
+ *  @hw: pointer to hardware structure
+ *  @byte_offset: byte offset to read
+ *  @dev_addr: I2C bus address to read from
+ *  @data: value read
+ *
+ *  Performs byte read operation to SFP module's EEPROM over I2C interface.
+ **/
+s32 ixgbe_read_i2c_byte_unlocked(struct ixgbe_hw *hw, u8 byte_offset,
+				 u8 dev_addr, u8 *data)
+{
+	return ixgbe_call_func(hw, hw->phy.ops.read_i2c_byte_unlocked,
+			       (hw, byte_offset, dev_addr, data),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_read_link - Perform read operation on link device
+ * @hw: pointer to the hardware structure
+ * @addr: bus address to read from
+ * @reg: device register to read from
+ * @val: pointer to location to receive read value
+ *
+ * Returns an error code on error.
+ */
+s32 ixgbe_read_link(struct ixgbe_hw *hw, u8 addr, u16 reg, u16 *val)
+{
+	return ixgbe_call_func(hw, hw->link.ops.read_link, (hw, addr,
+			       reg, val), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_read_link_unlocked - Perform read operation on link device
+ * @hw: pointer to the hardware structure
+ * @addr: bus address to read from
+ * @reg: device register to read from
+ * @val: pointer to location to receive read value
+ *
+ * Returns an error code on error.
+ **/
+s32 ixgbe_read_link_unlocked(struct ixgbe_hw *hw, u8 addr, u16 reg, u16 *val)
+{
+	return ixgbe_call_func(hw, hw->link.ops.read_link_unlocked,
+			       (hw, addr, reg, val), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_write_i2c_byte - Writes 8 bit word over I2C
+ *  @hw: pointer to hardware structure
+ *  @byte_offset: byte offset to write
+ *  @dev_addr: I2C bus address to write to
+ *  @data: value to write
+ *
+ *  Performs byte write operation to SFP module's EEPROM over I2C interface
+ *  at a specified device address.
+ **/
+s32 ixgbe_write_i2c_byte(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr,
+			 u8 data)
+{
+	return ixgbe_call_func(hw, hw->phy.ops.write_i2c_byte, (hw, byte_offset,
+			       dev_addr, data), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_write_i2c_byte_unlocked - Writes 8 bit word over I2C
+ *  @hw: pointer to hardware structure
+ *  @byte_offset: byte offset to write
+ *  @dev_addr: I2C bus address to write to
+ *  @data: value to write
+ *
+ *  Performs byte write operation to SFP module's EEPROM over I2C interface
+ *  at a specified device address.
+ **/
+s32 ixgbe_write_i2c_byte_unlocked(struct ixgbe_hw *hw, u8 byte_offset,
+				  u8 dev_addr, u8 data)
+{
+	return ixgbe_call_func(hw, hw->phy.ops.write_i2c_byte_unlocked,
+			       (hw, byte_offset, dev_addr, data),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_write_link - Perform write operation on link device
+ * @hw: pointer to the hardware structure
+ * @addr: bus address to write to
+ * @reg: device register to write to
+ * @val: value to write
+ *
+ * Returns an error code on error.
+ */
+s32 ixgbe_write_link(struct ixgbe_hw *hw, u8 addr, u16 reg, u16 val)
+{
+	return ixgbe_call_func(hw, hw->link.ops.write_link,
+			       (hw, addr, reg, val), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_write_link_unlocked - Perform write operation on link device
+ * @hw: pointer to the hardware structure
+ * @addr: bus address to write to
+ * @reg: device register to write to
+ * @val: value to write
+ *
+ * Returns an error code on error.
+ **/
+s32 ixgbe_write_link_unlocked(struct ixgbe_hw *hw, u8 addr, u16 reg, u16 val)
+{
+	return ixgbe_call_func(hw, hw->link.ops.write_link_unlocked,
+			       (hw, addr, reg, val), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_write_i2c_eeprom - Writes 8 bit EEPROM word over I2C interface
+ *  @hw: pointer to hardware structure
+ *  @byte_offset: EEPROM byte offset to write
+ *  @eeprom_data: value to write
+ *
+ *  Performs byte write operation to SFP module's EEPROM over I2C interface.
+ **/
+s32 ixgbe_write_i2c_eeprom(struct ixgbe_hw *hw,
+			   u8 byte_offset, u8 eeprom_data)
+{
+	return ixgbe_call_func(hw, hw->phy.ops.write_i2c_eeprom,
+			       (hw, byte_offset, eeprom_data),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_read_i2c_eeprom - Reads 8 bit EEPROM word over I2C interface
+ *  @hw: pointer to hardware structure
+ *  @byte_offset: EEPROM byte offset to read
+ *  @eeprom_data: value read
+ *
+ *  Performs byte read operation to SFP module's EEPROM over I2C interface.
+ **/
+s32 ixgbe_read_i2c_eeprom(struct ixgbe_hw *hw, u8 byte_offset, u8 *eeprom_data)
+{
+	return ixgbe_call_func(hw, hw->phy.ops.read_i2c_eeprom,
+			      (hw, byte_offset, eeprom_data),
+			      IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_get_supported_physical_layer - Returns physical layer type
+ *  @hw: pointer to hardware structure
+ *
+ *  Determines physical layer capabilities of the current configuration.
+ **/
+u32 ixgbe_get_supported_physical_layer(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.get_supported_physical_layer,
+			       (hw), IXGBE_PHYSICAL_LAYER_UNKNOWN);
+}
+
+/**
+ *  ixgbe_enable_rx_dma - Enables Rx DMA unit, dependent on device specifics
+ *  @hw: pointer to hardware structure
+ *  @regval: bitfield to write to the Rx DMA register
+ *
+ *  Enables the Rx DMA unit of the device.
+ **/
+s32 ixgbe_enable_rx_dma(struct ixgbe_hw *hw, u32 regval)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.enable_rx_dma,
+			       (hw, regval), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_disable_sec_rx_path - Stops the receive data path
+ *  @hw: pointer to hardware structure
+ *
+ *  Stops the receive data path.
+ **/
+s32 ixgbe_disable_sec_rx_path(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.disable_sec_rx_path,
+				(hw), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_enable_sec_rx_path - Enables the receive data path
+ *  @hw: pointer to hardware structure
+ *
+ *  Enables the receive data path.
+ **/
+s32 ixgbe_enable_sec_rx_path(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.enable_sec_rx_path,
+				(hw), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_acquire_swfw_semaphore - Acquire SWFW semaphore
+ *  @hw: pointer to hardware structure
+ *  @mask: Mask to specify which semaphore to acquire
+ *
+ *  Acquires the SWFW semaphore through SW_FW_SYNC register for the specified
+ *  function (CSR, PHY0, PHY1, EEPROM, Flash)
+ **/
+s32 ixgbe_acquire_swfw_semaphore(struct ixgbe_hw *hw, u32 mask)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.acquire_swfw_sync,
+			       (hw, mask), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_release_swfw_semaphore - Release SWFW semaphore
+ *  @hw: pointer to hardware structure
+ *  @mask: Mask to specify which semaphore to release
+ *
+ *  Releases the SWFW semaphore through SW_FW_SYNC register for the specified
+ *  function (CSR, PHY0, PHY1, EEPROM, Flash)
+ **/
+void ixgbe_release_swfw_semaphore(struct ixgbe_hw *hw, u32 mask)
+{
+	if (hw->mac.ops.release_swfw_sync)
+		hw->mac.ops.release_swfw_sync(hw, mask);
+}
+
+
+void ixgbe_disable_rx(struct ixgbe_hw *hw)
+{
+	if (hw->mac.ops.disable_rx)
+		hw->mac.ops.disable_rx(hw);
+}
+
+void ixgbe_enable_rx(struct ixgbe_hw *hw)
+{
+	if (hw->mac.ops.enable_rx)
+		hw->mac.ops.enable_rx(hw);
+}
+
+/**
+ *  ixgbe_set_rate_select_speed - Set module link speed
+ *  @hw: pointer to hardware structure
+ *  @speed: link speed to set
+ *
+ *  Set module link speed via the rate select.
+ */
+void ixgbe_set_rate_select_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed)
+{
+	if (hw->mac.ops.set_rate_select_speed)
+		hw->mac.ops.set_rate_select_speed(hw, speed);
+}
diff --git a/drivers/net/ixgbe/base/ixgbe_api.h b/drivers/net/ixgbe/base/ixgbe_api.h
new file mode 100644
index 00000000..ae26a6ac
--- /dev/null
+++ b/drivers/net/ixgbe/base/ixgbe_api.h
@@ -0,0 +1,219 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+    this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in the
+    documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+    contributors may be used to endorse or promote products derived from
+    this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#ifndef _IXGBE_API_H_
+#define _IXGBE_API_H_
+
+#include "ixgbe_type.h"
+
+void ixgbe_dcb_get_rtrup2tc(struct ixgbe_hw *hw, u8 *map);
+
+s32 ixgbe_init_shared_code(struct ixgbe_hw *hw);
+
+extern s32 ixgbe_init_ops_82598(struct ixgbe_hw *hw);
+extern s32 ixgbe_init_ops_82599(struct ixgbe_hw *hw);
+extern s32 ixgbe_init_ops_X540(struct ixgbe_hw *hw);
+extern s32 ixgbe_init_ops_X550(struct ixgbe_hw *hw);
+extern s32 ixgbe_init_ops_X550EM(struct ixgbe_hw *hw);
+extern s32 ixgbe_init_ops_vf(struct ixgbe_hw *hw);
+
+s32 ixgbe_set_mac_type(struct ixgbe_hw *hw);
+s32 ixgbe_init_hw(struct ixgbe_hw *hw);
+s32 ixgbe_reset_hw(struct ixgbe_hw *hw);
+s32 ixgbe_start_hw(struct ixgbe_hw *hw);
+void ixgbe_enable_relaxed_ordering(struct ixgbe_hw *hw);
+s32 ixgbe_clear_hw_cntrs(struct ixgbe_hw *hw);
+enum ixgbe_media_type ixgbe_get_media_type(struct ixgbe_hw *hw);
+s32 ixgbe_get_mac_addr(struct ixgbe_hw *hw, u8 *mac_addr);
+s32 ixgbe_get_bus_info(struct ixgbe_hw *hw);
+u32 ixgbe_get_num_of_tx_queues(struct ixgbe_hw *hw);
+u32 ixgbe_get_num_of_rx_queues(struct ixgbe_hw *hw);
+s32 ixgbe_stop_adapter(struct ixgbe_hw *hw);
+s32 ixgbe_read_pba_num(struct ixgbe_hw *hw, u32 *pba_num);
+s32 ixgbe_read_pba_string(struct ixgbe_hw *hw, u8 *pba_num, u32 pba_num_size);
+
+s32 ixgbe_identify_phy(struct ixgbe_hw *hw);
+s32 ixgbe_reset_phy(struct ixgbe_hw *hw);
+s32 ixgbe_read_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
+		       u16 *phy_data);
+s32 ixgbe_write_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
+			u16 phy_data);
+
+s32 ixgbe_setup_phy_link(struct ixgbe_hw *hw);
+s32 ixgbe_setup_internal_phy(struct ixgbe_hw *hw);
+s32 ixgbe_check_phy_link(struct ixgbe_hw *hw,
+			 ixgbe_link_speed *speed,
+			 bool *link_up);
+s32 ixgbe_setup_phy_link_speed(struct ixgbe_hw *hw,
+			       ixgbe_link_speed speed,
+			       bool autoneg_wait_to_complete);
+s32 ixgbe_set_phy_power(struct ixgbe_hw *, bool on);
+void ixgbe_disable_tx_laser(struct ixgbe_hw *hw);
+void ixgbe_enable_tx_laser(struct ixgbe_hw *hw);
+void ixgbe_flap_tx_laser(struct ixgbe_hw *hw);
+s32 ixgbe_setup_link(struct ixgbe_hw *hw, ixgbe_link_speed speed,
+		     bool autoneg_wait_to_complete);
+s32 ixgbe_setup_mac_link(struct ixgbe_hw *hw, ixgbe_link_speed speed,
+			 bool autoneg_wait_to_complete);
+s32 ixgbe_check_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+		     bool *link_up, bool link_up_wait_to_complete);
+s32 ixgbe_get_link_capabilities(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+				bool *autoneg);
+s32 ixgbe_led_on(struct ixgbe_hw *hw, u32 index);
+s32 ixgbe_led_off(struct ixgbe_hw *hw, u32 index);
+s32 ixgbe_blink_led_start(struct ixgbe_hw *hw, u32 index);
+s32 ixgbe_blink_led_stop(struct ixgbe_hw *hw, u32 index);
+
+s32 ixgbe_init_eeprom_params(struct ixgbe_hw *hw);
+s32 ixgbe_write_eeprom(struct ixgbe_hw *hw, u16 offset, u16 data);
+s32 ixgbe_write_eeprom_buffer(struct ixgbe_hw *hw, u16 offset,
+			      u16 words, u16 *data);
+s32 ixgbe_read_eeprom(struct ixgbe_hw *hw, u16 offset, u16 *data);
+s32 ixgbe_read_eeprom_buffer(struct ixgbe_hw *hw, u16 offset,
+			     u16 words, u16 *data);
+
+s32 ixgbe_validate_eeprom_checksum(struct ixgbe_hw *hw, u16 *checksum_val);
+s32 ixgbe_update_eeprom_checksum(struct ixgbe_hw *hw);
+
+s32 ixgbe_insert_mac_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq);
+s32 ixgbe_set_rar(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
+		  u32 enable_addr);
+s32 ixgbe_clear_rar(struct ixgbe_hw *hw, u32 index);
+s32 ixgbe_set_vmdq(struct ixgbe_hw *hw, u32 rar, u32 vmdq);
+s32 ixgbe_set_vmdq_san_mac(struct ixgbe_hw *hw, u32 vmdq);
+s32 ixgbe_clear_vmdq(struct ixgbe_hw *hw, u32 rar, u32 vmdq);
+s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw);
+u32 ixgbe_get_num_rx_addrs(struct ixgbe_hw *hw);
+s32 ixgbe_update_uc_addr_list(struct ixgbe_hw *hw, u8 *addr_list,
+			      u32 addr_count, ixgbe_mc_addr_itr func);
+s32 ixgbe_update_mc_addr_list(struct ixgbe_hw *hw, u8 *mc_addr_list,
+			      u32 mc_addr_count, ixgbe_mc_addr_itr func,
+			      bool clear);
+void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr_list, u32 vmdq);
+s32 ixgbe_enable_mc(struct ixgbe_hw *hw);
+s32 ixgbe_disable_mc(struct ixgbe_hw *hw);
+s32 ixgbe_clear_vfta(struct ixgbe_hw *hw);
+s32 ixgbe_set_vfta(struct ixgbe_hw *hw, u32 vlan,
+		   u32 vind, bool vlan_on);
+s32 ixgbe_set_vlvf(struct ixgbe_hw *hw, u32 vlan, u32 vind,
+		   bool vlan_on, bool *vfta_changed);
+s32 ixgbe_fc_enable(struct ixgbe_hw *hw);
+s32 ixgbe_setup_fc(struct ixgbe_hw *hw);
+s32 ixgbe_set_fw_drv_ver(struct ixgbe_hw *hw, u8 maj, u8 min, u8 build,
+			 u8 ver);
+s32 ixgbe_get_thermal_sensor_data(struct ixgbe_hw *hw);
+s32 ixgbe_init_thermal_sensor_thresh(struct ixgbe_hw *hw);
+void ixgbe_set_mta(struct ixgbe_hw *hw, u8 *mc_addr);
+s32 ixgbe_get_phy_firmware_version(struct ixgbe_hw *hw,
+				   u16 *firmware_version);
+s32 ixgbe_read_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 *val);
+s32 ixgbe_write_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 val);
+s32 ixgbe_init_uta_tables(struct ixgbe_hw *hw);
+s32 ixgbe_read_i2c_eeprom(struct ixgbe_hw *hw, u8 byte_offset, u8 *eeprom_data);
+u32 ixgbe_get_supported_physical_layer(struct ixgbe_hw *hw);
+s32 ixgbe_enable_rx_dma(struct ixgbe_hw *hw, u32 regval);
+s32 ixgbe_disable_sec_rx_path(struct ixgbe_hw *hw);
+s32 ixgbe_enable_sec_rx_path(struct ixgbe_hw *hw);
+s32 ixgbe_mng_fw_enabled(struct ixgbe_hw *hw);
+s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw);
+s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 fdirctrl);
+s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 fdirctrl,
+					bool cloud_mode);
+void ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw,
+					   union ixgbe_atr_hash_dword input,
+					   union ixgbe_atr_hash_dword common,
+					   u8 queue);
+s32 ixgbe_fdir_set_input_mask_82599(struct ixgbe_hw *hw,
+				    union ixgbe_atr_input *input_mask, bool cloud_mode);
+s32 ixgbe_fdir_write_perfect_filter_82599(struct ixgbe_hw *hw,
+					  union ixgbe_atr_input *input,
+					  u16 soft_id, u8 queue, bool cloud_mode);
+s32 ixgbe_fdir_erase_perfect_filter_82599(struct ixgbe_hw *hw,
+					  union ixgbe_atr_input *input,
+					  u16 soft_id);
+s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw,
+					union ixgbe_atr_input *input,
+					union ixgbe_atr_input *mask,
+					u16 soft_id,
+					u8 queue,
+					bool cloud_mode);
+void ixgbe_atr_compute_perfect_hash_82599(union ixgbe_atr_input *input,
+					  union ixgbe_atr_input *mask);
+u32 ixgbe_atr_compute_sig_hash_82599(union ixgbe_atr_hash_dword input,
+				     union ixgbe_atr_hash_dword common);
+bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw);
+s32 ixgbe_read_i2c_byte(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr,
+			u8 *data);
+s32 ixgbe_read_i2c_byte_unlocked(struct ixgbe_hw *hw, u8 byte_offset,
+				 u8 dev_addr, u8 *data);
+s32 ixgbe_read_link(struct ixgbe_hw *hw, u8 addr, u16 reg, u16 *val);
+s32 ixgbe_read_link_unlocked(struct ixgbe_hw *hw, u8 addr, u16 reg, u16 *val);
+s32 ixgbe_write_i2c_byte(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr,
+			 u8 data);
+void ixgbe_set_fdir_drop_queue_82599(struct ixgbe_hw *hw, u8 dropqueue);
+s32 ixgbe_write_i2c_byte_unlocked(struct ixgbe_hw *hw, u8 byte_offset,
+				  u8 dev_addr, u8 data);
+s32 ixgbe_write_link(struct ixgbe_hw *hw, u8 addr, u16 reg, u16 val);
+s32 ixgbe_write_link_unlocked(struct ixgbe_hw *hw, u8 addr, u16 reg, u16 val);
+s32 ixgbe_write_i2c_eeprom(struct ixgbe_hw *hw, u8 byte_offset, u8 eeprom_data);
+s32 ixgbe_get_san_mac_addr(struct ixgbe_hw *hw, u8 *san_mac_addr);
+s32 ixgbe_set_san_mac_addr(struct ixgbe_hw *hw, u8 *san_mac_addr);
+s32 ixgbe_get_device_caps(struct ixgbe_hw *hw, u16 *device_caps);
+s32 ixgbe_acquire_swfw_semaphore(struct ixgbe_hw *hw, u32 mask);
+void ixgbe_release_swfw_semaphore(struct ixgbe_hw *hw, u32 mask);
+s32 ixgbe_get_wwn_prefix(struct ixgbe_hw *hw, u16 *wwnn_prefix,
+			 u16 *wwpn_prefix);
+s32 ixgbe_get_fcoe_boot_status(struct ixgbe_hw *hw, u16 *bs);
+s32 ixgbe_dmac_config(struct ixgbe_hw *hw);
+s32 ixgbe_dmac_update_tcs(struct ixgbe_hw *hw);
+s32 ixgbe_dmac_config_tcs(struct ixgbe_hw *hw);
+s32 ixgbe_setup_eee(struct ixgbe_hw *hw, bool enable_eee);
+void ixgbe_set_source_address_pruning(struct ixgbe_hw *hw, bool enable,
+				      unsigned int vf);
+void ixgbe_set_ethertype_anti_spoofing(struct ixgbe_hw *hw, bool enable,
+				       int vf);
+s32 ixgbe_read_iosf_sb_reg(struct ixgbe_hw *hw, u32 reg_addr,
+			u32 device_type, u32 *phy_data);
+s32 ixgbe_write_iosf_sb_reg(struct ixgbe_hw *hw, u32 reg_addr,
+			u32 device_type, u32 phy_data);
+void ixgbe_disable_mdd(struct ixgbe_hw *hw);
+void ixgbe_enable_mdd(struct ixgbe_hw *hw);
+void ixgbe_mdd_event(struct ixgbe_hw *hw, u32 *vf_bitmap);
+void ixgbe_restore_mdd_vf(struct ixgbe_hw *hw, u32 vf);
+s32 ixgbe_enter_lplu(struct ixgbe_hw *hw);
+s32 ixgbe_handle_lasi(struct ixgbe_hw *hw);
+void ixgbe_set_rate_select_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed);
+void ixgbe_disable_rx(struct ixgbe_hw *hw);
+void ixgbe_enable_rx(struct ixgbe_hw *hw);
+
+#endif /* _IXGBE_API_H_ */
diff --git a/drivers/net/ixgbe/base/ixgbe_common.c b/drivers/net/ixgbe/base/ixgbe_common.c
new file mode 100644
index 00000000..ec61408d
--- /dev/null
+++ b/drivers/net/ixgbe/base/ixgbe_common.c
@@ -0,0 +1,5142 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+    this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in the
+    documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+    contributors may be used to endorse or promote products derived from
+    this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#include "ixgbe_common.h"
+#include "ixgbe_phy.h"
+#include "ixgbe_dcb.h"
+#include "ixgbe_dcb_82599.h"
+#include "ixgbe_api.h"
+
+STATIC s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw);
+STATIC s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw);
+STATIC void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw);
+STATIC s32 ixgbe_ready_eeprom(struct ixgbe_hw *hw);
+STATIC void ixgbe_standby_eeprom(struct ixgbe_hw *hw);
+STATIC void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data,
+					u16 count);
+STATIC u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count);
+STATIC void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec);
+STATIC void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec);
+STATIC void ixgbe_release_eeprom(struct ixgbe_hw *hw);
+
+STATIC s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr);
+STATIC s32 ixgbe_get_san_mac_addr_offset(struct ixgbe_hw *hw,
+					 u16 *san_mac_offset);
+STATIC s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset,
+					     u16 words, u16 *data);
+STATIC s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset,
+					      u16 words, u16 *data);
+STATIC s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw,
+						 u16 offset);
+
+/**
+ *  ixgbe_init_ops_generic - Inits function ptrs
+ *  @hw: pointer to the hardware structure
+ *
+ *  Initialize the function pointers.
+ **/
+s32 ixgbe_init_ops_generic(struct ixgbe_hw *hw)
+{
+	struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+	struct ixgbe_mac_info *mac = &hw->mac;
+	u32 eec = IXGBE_READ_REG(hw, IXGBE_EEC_BY_MAC(hw));
+
+	DEBUGFUNC("ixgbe_init_ops_generic");
+
+	/* EEPROM */
+	eeprom->ops.init_params = ixgbe_init_eeprom_params_generic;
+	/* If EEPROM is valid (bit 8 = 1), use EERD otherwise use bit bang */
+	if (eec & IXGBE_EEC_PRES) {
+		eeprom->ops.read = ixgbe_read_eerd_generic;
+		eeprom->ops.read_buffer = ixgbe_read_eerd_buffer_generic;
+	} else {
+		eeprom->ops.read = ixgbe_read_eeprom_bit_bang_generic;
+		eeprom->ops.read_buffer =
+				 ixgbe_read_eeprom_buffer_bit_bang_generic;
+	}
+	eeprom->ops.write = ixgbe_write_eeprom_generic;
+	eeprom->ops.write_buffer = ixgbe_write_eeprom_buffer_bit_bang_generic;
+	eeprom->ops.validate_checksum =
+				      ixgbe_validate_eeprom_checksum_generic;
+	eeprom->ops.update_checksum = ixgbe_update_eeprom_checksum_generic;
+	eeprom->ops.calc_checksum = ixgbe_calc_eeprom_checksum_generic;
+
+	/* MAC */
+	mac->ops.init_hw = ixgbe_init_hw_generic;
+	mac->ops.reset_hw = NULL;
+	mac->ops.start_hw = ixgbe_start_hw_generic;
+	mac->ops.clear_hw_cntrs = ixgbe_clear_hw_cntrs_generic;
+	mac->ops.get_media_type = NULL;
+	mac->ops.get_supported_physical_layer = NULL;
+	mac->ops.enable_rx_dma = ixgbe_enable_rx_dma_generic;
+	mac->ops.get_mac_addr = ixgbe_get_mac_addr_generic;
+	mac->ops.stop_adapter = ixgbe_stop_adapter_generic;
+	mac->ops.get_bus_info = ixgbe_get_bus_info_generic;
+	mac->ops.set_lan_id = ixgbe_set_lan_id_multi_port_pcie;
+	mac->ops.acquire_swfw_sync = ixgbe_acquire_swfw_sync;
+	mac->ops.release_swfw_sync = ixgbe_release_swfw_sync;
+	mac->ops.prot_autoc_read = prot_autoc_read_generic;
+	mac->ops.prot_autoc_write = prot_autoc_write_generic;
+
+	/* LEDs */
+	mac->ops.led_on = ixgbe_led_on_generic;
+	mac->ops.led_off = ixgbe_led_off_generic;
+	mac->ops.blink_led_start = ixgbe_blink_led_start_generic;
+	mac->ops.blink_led_stop = ixgbe_blink_led_stop_generic;
+
+	/* RAR, Multicast, VLAN */
+	mac->ops.set_rar = ixgbe_set_rar_generic;
+	mac->ops.clear_rar = ixgbe_clear_rar_generic;
+	mac->ops.insert_mac_addr = NULL;
+	mac->ops.set_vmdq = NULL;
+	mac->ops.clear_vmdq = NULL;
+	mac->ops.init_rx_addrs = ixgbe_init_rx_addrs_generic;
+	mac->ops.update_uc_addr_list = ixgbe_update_uc_addr_list_generic;
+	mac->ops.update_mc_addr_list = ixgbe_update_mc_addr_list_generic;
+	mac->ops.enable_mc = ixgbe_enable_mc_generic;
+	mac->ops.disable_mc = ixgbe_disable_mc_generic;
+	mac->ops.clear_vfta = NULL;
+	mac->ops.set_vfta = NULL;
+	mac->ops.set_vlvf = NULL;
+	mac->ops.init_uta_tables = NULL;
+	mac->ops.enable_rx = ixgbe_enable_rx_generic;
+	mac->ops.disable_rx = ixgbe_disable_rx_generic;
+
+	/* Flow Control */
+	mac->ops.fc_enable = ixgbe_fc_enable_generic;
+	mac->ops.setup_fc = ixgbe_setup_fc_generic;
+
+	/* Link */
+	mac->ops.get_link_capabilities = NULL;
+	mac->ops.setup_link = NULL;
+	mac->ops.check_link = NULL;
+	mac->ops.dmac_config = NULL;
+	mac->ops.dmac_update_tcs = NULL;
+	mac->ops.dmac_config_tcs = NULL;
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_device_supports_autoneg_fc - Check if device supports autonegotiation
+ * of flow control
+ * @hw: pointer to hardware structure
+ *
+ * This function returns true if the device supports flow control
+ * autonegotiation, and false if it does not.
+ *
+ **/
+bool ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw)
+{
+	bool supported = false;
+	ixgbe_link_speed speed;
+	bool link_up;
+
+	DEBUGFUNC("ixgbe_device_supports_autoneg_fc");
+
+	switch (hw->phy.media_type) {
+	case ixgbe_media_type_fiber_qsfp:
+	case ixgbe_media_type_fiber:
+		hw->mac.ops.check_link(hw, &speed, &link_up, false);
+		/* if link is down, assume supported */
+		if (link_up)
+			supported = speed == IXGBE_LINK_SPEED_1GB_FULL ?
+				true : false;
+		else
+			supported = true;
+		break;
+	case ixgbe_media_type_backplane:
+		supported = true;
+		break;
+	case ixgbe_media_type_copper:
+		/* only some copper devices support flow control autoneg */
+		switch (hw->device_id) {
+		case IXGBE_DEV_ID_82599_T3_LOM:
+		case IXGBE_DEV_ID_X540T:
+		case IXGBE_DEV_ID_X540T1:
+		case IXGBE_DEV_ID_X550T:
+		case IXGBE_DEV_ID_X550T1:
+		case IXGBE_DEV_ID_X550EM_X_10G_T:
+			supported = true;
+			break;
+		default:
+			supported = false;
+		}
+	default:
+		break;
+	}
+
+	ERROR_REPORT2(IXGBE_ERROR_UNSUPPORTED,
+		      "Device %x does not support flow control autoneg",
+		      hw->device_id);
+	return supported;
+}
+
+/**
+ *  ixgbe_setup_fc_generic - Set up flow control
+ *  @hw: pointer to hardware structure
+ *
+ *  Called at init time to set up flow control.
+ **/
+s32 ixgbe_setup_fc_generic(struct ixgbe_hw *hw)
+{
+	s32 ret_val = IXGBE_SUCCESS;
+	u32 reg = 0, reg_bp = 0;
+	u16 reg_cu = 0;
+	bool locked = false;
+
+	DEBUGFUNC("ixgbe_setup_fc_generic");
+
+	/* Validate the requested mode */
+	if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) {
+		ERROR_REPORT1(IXGBE_ERROR_UNSUPPORTED,
+			   "ixgbe_fc_rx_pause not valid in strict IEEE mode\n");
+		ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
+		goto out;
+	}
+
+	/*
+	 * 10gig parts do not have a word in the EEPROM to determine the
+	 * default flow control setting, so we explicitly set it to full.
+	 */
+	if (hw->fc.requested_mode == ixgbe_fc_default)
+		hw->fc.requested_mode = ixgbe_fc_full;
+
+	/*
+	 * Set up the 1G and 10G flow control advertisement registers so the
+	 * HW will be able to do fc autoneg once the cable is plugged in.  If
+	 * we link at 10G, the 1G advertisement is harmless and vice versa.
+	 */
+	switch (hw->phy.media_type) {
+	case ixgbe_media_type_backplane:
+		/* some MAC's need RMW protection on AUTOC */
+		ret_val = hw->mac.ops.prot_autoc_read(hw, &locked, &reg_bp);
+		if (ret_val != IXGBE_SUCCESS)
+			goto out;
+
+		/* only backplane uses autoc so fall though */
+	case ixgbe_media_type_fiber_qsfp:
+	case ixgbe_media_type_fiber:
+		reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA);
+
+		break;
+	case ixgbe_media_type_copper:
+		hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_ADVT,
+				     IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &reg_cu);
+		break;
+	default:
+		break;
+	}
+
+	/*
+	 * The possible values of fc.requested_mode are:
+	 * 0: Flow control is completely disabled
+	 * 1: Rx flow control is enabled (we can receive pause frames,
+	 *    but not send pause frames).
+	 * 2: Tx flow control is enabled (we can send pause frames but
+	 *    we do not support receiving pause frames).
+	 * 3: Both Rx and Tx flow control (symmetric) are enabled.
+	 * other: Invalid.
+	 */
+	switch (hw->fc.requested_mode) {
+	case ixgbe_fc_none:
+		/* Flow control completely disabled by software override. */
+		reg &= ~(IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE);
+		if (hw->phy.media_type == ixgbe_media_type_backplane)
+			reg_bp &= ~(IXGBE_AUTOC_SYM_PAUSE |
+				    IXGBE_AUTOC_ASM_PAUSE);
+		else if (hw->phy.media_type == ixgbe_media_type_copper)
+			reg_cu &= ~(IXGBE_TAF_SYM_PAUSE | IXGBE_TAF_ASM_PAUSE);
+		break;
+	case ixgbe_fc_tx_pause:
+		/*
+		 * Tx Flow control is enabled, and Rx Flow control is
+		 * disabled by software override.
+		 */
+		reg |= IXGBE_PCS1GANA_ASM_PAUSE;
+		reg &= ~IXGBE_PCS1GANA_SYM_PAUSE;
+		if (hw->phy.media_type == ixgbe_media_type_backplane) {
+			reg_bp |= IXGBE_AUTOC_ASM_PAUSE;
+			reg_bp &= ~IXGBE_AUTOC_SYM_PAUSE;
+		} else if (hw->phy.media_type == ixgbe_media_type_copper) {
+			reg_cu |= IXGBE_TAF_ASM_PAUSE;
+			reg_cu &= ~IXGBE_TAF_SYM_PAUSE;
+		}
+		break;
+	case ixgbe_fc_rx_pause:
+		/*
+		 * Rx Flow control is enabled and Tx Flow control is
+		 * disabled by software override. Since there really
+		 * isn't a way to advertise that we are capable of RX
+		 * Pause ONLY, we will advertise that we support both
+		 * symmetric and asymmetric Rx PAUSE, as such we fall
+		 * through to the fc_full statement.  Later, we will
+		 * disable the adapter's ability to send PAUSE frames.
+		 */
+	case ixgbe_fc_full:
+		/* Flow control (both Rx and Tx) is enabled by SW override. */
+		reg |= IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE;
+		if (hw->phy.media_type == ixgbe_media_type_backplane)
+			reg_bp |= IXGBE_AUTOC_SYM_PAUSE |
+				  IXGBE_AUTOC_ASM_PAUSE;
+		else if (hw->phy.media_type == ixgbe_media_type_copper)
+			reg_cu |= IXGBE_TAF_SYM_PAUSE | IXGBE_TAF_ASM_PAUSE;
+		break;
+	default:
+		ERROR_REPORT1(IXGBE_ERROR_ARGUMENT,
+			     "Flow control param set incorrectly\n");
+		ret_val = IXGBE_ERR_CONFIG;
+		goto out;
+		break;
+	}
+
+	if (hw->mac.type < ixgbe_mac_X540) {
+		/*
+		 * Enable auto-negotiation between the MAC & PHY;
+		 * the MAC will advertise clause 37 flow control.
+		 */
+		IXGBE_WRITE_REG(hw, IXGBE_PCS1GANA, reg);
+		reg = IXGBE_READ_REG(hw, IXGBE_PCS1GLCTL);
+
+		/* Disable AN timeout */
+		if (hw->fc.strict_ieee)
+			reg &= ~IXGBE_PCS1GLCTL_AN_1G_TIMEOUT_EN;
+
+		IXGBE_WRITE_REG(hw, IXGBE_PCS1GLCTL, reg);
+		DEBUGOUT1("Set up FC; PCS1GLCTL = 0x%08X\n", reg);
+	}
+
+	/*
+	 * AUTOC restart handles negotiation of 1G and 10G on backplane
+	 * and copper. There is no need to set the PCS1GCTL register.
+	 *
+	 */
+	if (hw->phy.media_type == ixgbe_media_type_backplane) {
+		reg_bp |= IXGBE_AUTOC_AN_RESTART;
+		ret_val = hw->mac.ops.prot_autoc_write(hw, reg_bp, locked);
+		if (ret_val)
+			goto out;
+	} else if ((hw->phy.media_type == ixgbe_media_type_copper) &&
+		    (ixgbe_device_supports_autoneg_fc(hw))) {
+		hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_ADVT,
+				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE, reg_cu);
+	}
+
+	DEBUGOUT1("Set up FC; PCS1GLCTL = 0x%08X\n", reg);
+out:
+	return ret_val;
+}
+
+/**
+ *  ixgbe_start_hw_generic - Prepare hardware for Tx/Rx
+ *  @hw: pointer to hardware structure
+ *
+ *  Starts the hardware by filling the bus info structure and media type, clears
+ *  all on chip counters, initializes receive address registers, multicast
+ *  table, VLAN filter table, calls routine to set up link and flow control
+ *  settings, and leaves transmit and receive units disabled and uninitialized
+ **/
+s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw)
+{
+	s32 ret_val;
+	u32 ctrl_ext;
+
+	DEBUGFUNC("ixgbe_start_hw_generic");
+
+	/* Set the media type */
+	hw->phy.media_type = hw->mac.ops.get_media_type(hw);
+
+	/* PHY ops initialization must be done in reset_hw() */
+
+	/* Clear the VLAN filter table */
+	hw->mac.ops.clear_vfta(hw);
+
+	/* Clear statistics registers */
+	hw->mac.ops.clear_hw_cntrs(hw);
+
+	/* Set No Snoop Disable */
+	ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT);
+	ctrl_ext |= IXGBE_CTRL_EXT_NS_DIS;
+	IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext);
+	IXGBE_WRITE_FLUSH(hw);
+
+	/* Setup flow control */
+	ret_val = ixgbe_setup_fc(hw);
+	if (ret_val != IXGBE_SUCCESS)
+		goto out;
+
+	/* Clear adapter stopped flag */
+	hw->adapter_stopped = false;
+
+out:
+	return ret_val;
+}
+
+/**
+ *  ixgbe_start_hw_gen2 - Init sequence for common device family
+ *  @hw: pointer to hw structure
+ *
+ * Performs the init sequence common to the second generation
+ * of 10 GbE devices.
+ * Devices in the second generation:
+ *     82599
+ *     X540
+ **/
+s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw)
+{
+	u32 i;
+	u32 regval;
+
+	/* Clear the rate limiters */
+	for (i = 0; i < hw->mac.max_tx_queues; i++) {
+		IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, i);
+		IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRC, 0);
+	}
+	IXGBE_WRITE_FLUSH(hw);
+
+	/* Disable relaxed ordering */
+	for (i = 0; i < hw->mac.max_tx_queues; i++) {
+		regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(i));
+		regval &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN;
+		IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(i), regval);
+	}
+
+	for (i = 0; i < hw->mac.max_rx_queues; i++) {
+		regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
+		regval &= ~(IXGBE_DCA_RXCTRL_DATA_WRO_EN |
+			    IXGBE_DCA_RXCTRL_HEAD_WRO_EN);
+		IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
+	}
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_init_hw_generic - Generic hardware initialization
+ *  @hw: pointer to hardware structure
+ *
+ *  Initialize the hardware by resetting the hardware, filling the bus info
+ *  structure and media type, clears all on chip counters, initializes receive
+ *  address registers, multicast table, VLAN filter table, calls routine to set
+ *  up link and flow control settings, and leaves transmit and receive units
+ *  disabled and uninitialized
+ **/
+s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw)
+{
+	s32 status;
+
+	DEBUGFUNC("ixgbe_init_hw_generic");
+
+	/* Reset the hardware */
+	status = hw->mac.ops.reset_hw(hw);
+
+	if (status == IXGBE_SUCCESS) {
+		/* Start the HW */
+		status = hw->mac.ops.start_hw(hw);
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_clear_hw_cntrs_generic - Generic clear hardware counters
+ *  @hw: pointer to hardware structure
+ *
+ *  Clears all hardware statistics counters by reading them from the hardware
+ *  Statistics counters are clear on read.
+ **/
+s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw)
+{
+	u16 i = 0;
+
+	DEBUGFUNC("ixgbe_clear_hw_cntrs_generic");
+
+	IXGBE_READ_REG(hw, IXGBE_CRCERRS);
+	IXGBE_READ_REG(hw, IXGBE_ILLERRC);
+	IXGBE_READ_REG(hw, IXGBE_ERRBC);
+	IXGBE_READ_REG(hw, IXGBE_MSPDC);
+	for (i = 0; i < 8; i++)
+		IXGBE_READ_REG(hw, IXGBE_MPC(i));
+
+	IXGBE_READ_REG(hw, IXGBE_MLFC);
+	IXGBE_READ_REG(hw, IXGBE_MRFC);
+	IXGBE_READ_REG(hw, IXGBE_RLEC);
+	IXGBE_READ_REG(hw, IXGBE_LXONTXC);
+	IXGBE_READ_REG(hw, IXGBE_LXOFFTXC);
+	if (hw->mac.type >= ixgbe_mac_82599EB) {
+		IXGBE_READ_REG(hw, IXGBE_LXONRXCNT);
+		IXGBE_READ_REG(hw, IXGBE_LXOFFRXCNT);
+	} else {
+		IXGBE_READ_REG(hw, IXGBE_LXONRXC);
+		IXGBE_READ_REG(hw, IXGBE_LXOFFRXC);
+	}
+
+	for (i = 0; i < 8; i++) {
+		IXGBE_READ_REG(hw, IXGBE_PXONTXC(i));
+		IXGBE_READ_REG(hw, IXGBE_PXOFFTXC(i));
+		if (hw->mac.type >= ixgbe_mac_82599EB) {
+			IXGBE_READ_REG(hw, IXGBE_PXONRXCNT(i));
+			IXGBE_READ_REG(hw, IXGBE_PXOFFRXCNT(i));
+		} else {
+			IXGBE_READ_REG(hw, IXGBE_PXONRXC(i));
+			IXGBE_READ_REG(hw, IXGBE_PXOFFRXC(i));
+		}
+	}
+	if (hw->mac.type >= ixgbe_mac_82599EB)
+		for (i = 0; i < 8; i++)
+			IXGBE_READ_REG(hw, IXGBE_PXON2OFFCNT(i));
+	IXGBE_READ_REG(hw, IXGBE_PRC64);
+	IXGBE_READ_REG(hw, IXGBE_PRC127);
+	IXGBE_READ_REG(hw, IXGBE_PRC255);
+	IXGBE_READ_REG(hw, IXGBE_PRC511);
+	IXGBE_READ_REG(hw, IXGBE_PRC1023);
+	IXGBE_READ_REG(hw, IXGBE_PRC1522);
+	IXGBE_READ_REG(hw, IXGBE_GPRC);
+	IXGBE_READ_REG(hw, IXGBE_BPRC);
+	IXGBE_READ_REG(hw, IXGBE_MPRC);
+	IXGBE_READ_REG(hw, IXGBE_GPTC);
+	IXGBE_READ_REG(hw, IXGBE_GORCL);
+	IXGBE_READ_REG(hw, IXGBE_GORCH);
+	IXGBE_READ_REG(hw, IXGBE_GOTCL);
+	IXGBE_READ_REG(hw, IXGBE_GOTCH);
+	if (hw->mac.type == ixgbe_mac_82598EB)
+		for (i = 0; i < 8; i++)
+			IXGBE_READ_REG(hw, IXGBE_RNBC(i));
+	IXGBE_READ_REG(hw, IXGBE_RUC);
+	IXGBE_READ_REG(hw, IXGBE_RFC);
+	IXGBE_READ_REG(hw, IXGBE_ROC);
+	IXGBE_READ_REG(hw, IXGBE_RJC);
+	IXGBE_READ_REG(hw, IXGBE_MNGPRC);
+	IXGBE_READ_REG(hw, IXGBE_MNGPDC);
+	IXGBE_READ_REG(hw, IXGBE_MNGPTC);
+	IXGBE_READ_REG(hw, IXGBE_TORL);
+	IXGBE_READ_REG(hw, IXGBE_TORH);
+	IXGBE_READ_REG(hw, IXGBE_TPR);
+	IXGBE_READ_REG(hw, IXGBE_TPT);
+	IXGBE_READ_REG(hw, IXGBE_PTC64);
+	IXGBE_READ_REG(hw, IXGBE_PTC127);
+	IXGBE_READ_REG(hw, IXGBE_PTC255);
+	IXGBE_READ_REG(hw, IXGBE_PTC511);
+	IXGBE_READ_REG(hw, IXGBE_PTC1023);
+	IXGBE_READ_REG(hw, IXGBE_PTC1522);
+	IXGBE_READ_REG(hw, IXGBE_MPTC);
+	IXGBE_READ_REG(hw, IXGBE_BPTC);
+	for (i = 0; i < 16; i++) {
+		IXGBE_READ_REG(hw, IXGBE_QPRC(i));
+		IXGBE_READ_REG(hw, IXGBE_QPTC(i));
+		if (hw->mac.type >= ixgbe_mac_82599EB) {
+			IXGBE_READ_REG(hw, IXGBE_QBRC_L(i));
+			IXGBE_READ_REG(hw, IXGBE_QBRC_H(i));
+			IXGBE_READ_REG(hw, IXGBE_QBTC_L(i));
+			IXGBE_READ_REG(hw, IXGBE_QBTC_H(i));
+			IXGBE_READ_REG(hw, IXGBE_QPRDC(i));
+		} else {
+			IXGBE_READ_REG(hw, IXGBE_QBRC(i));
+			IXGBE_READ_REG(hw, IXGBE_QBTC(i));
+		}
+	}
+
+	if (hw->mac.type == ixgbe_mac_X550 || hw->mac.type == ixgbe_mac_X540) {
+		if (hw->phy.id == 0)
+			ixgbe_identify_phy(hw);
+		hw->phy.ops.read_reg(hw, IXGBE_PCRC8ECL,
+				     IXGBE_MDIO_PCS_DEV_TYPE, &i);
+		hw->phy.ops.read_reg(hw, IXGBE_PCRC8ECH,
+				     IXGBE_MDIO_PCS_DEV_TYPE, &i);
+		hw->phy.ops.read_reg(hw, IXGBE_LDPCECL,
+				     IXGBE_MDIO_PCS_DEV_TYPE, &i);
+		hw->phy.ops.read_reg(hw, IXGBE_LDPCECH,
+				     IXGBE_MDIO_PCS_DEV_TYPE, &i);
+	}
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_read_pba_string_generic - Reads part number string from EEPROM
+ *  @hw: pointer to hardware structure
+ *  @pba_num: stores the part number string from the EEPROM
+ *  @pba_num_size: part number string buffer length
+ *
+ *  Reads the part number string from the EEPROM.
+ **/
+s32 ixgbe_read_pba_string_generic(struct ixgbe_hw *hw, u8 *pba_num,
+				  u32 pba_num_size)
+{
+	s32 ret_val;
+	u16 data;
+	u16 pba_ptr;
+	u16 offset;
+	u16 length;
+
+	DEBUGFUNC("ixgbe_read_pba_string_generic");
+
+	if (pba_num == NULL) {
+		DEBUGOUT("PBA string buffer was null\n");
+		return IXGBE_ERR_INVALID_ARGUMENT;
+	}
+
+	ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM0_PTR, &data);
+	if (ret_val) {
+		DEBUGOUT("NVM Read Error\n");
+		return ret_val;
+	}
+
+	ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM1_PTR, &pba_ptr);
+	if (ret_val) {
+		DEBUGOUT("NVM Read Error\n");
+		return ret_val;
+	}
+
+	/*
+	 * if data is not ptr guard the PBA must be in legacy format which
+	 * means pba_ptr is actually our second data word for the PBA number
+	 * and we can decode it into an ascii string
+	 */
+	if (data != IXGBE_PBANUM_PTR_GUARD) {
+		DEBUGOUT("NVM PBA number is not stored as string\n");
+
+		/* we will need 11 characters to store the PBA */
+		if (pba_num_size < 11) {
+			DEBUGOUT("PBA string buffer too small\n");
+			return IXGBE_ERR_NO_SPACE;
+		}
+
+		/* extract hex string from data and pba_ptr */
+		pba_num[0] = (data >> 12) & 0xF;
+		pba_num[1] = (data >> 8) & 0xF;
+		pba_num[2] = (data >> 4) & 0xF;
+		pba_num[3] = data & 0xF;
+		pba_num[4] = (pba_ptr >> 12) & 0xF;
+		pba_num[5] = (pba_ptr >> 8) & 0xF;
+		pba_num[6] = '-';
+		pba_num[7] = 0;
+		pba_num[8] = (pba_ptr >> 4) & 0xF;
+		pba_num[9] = pba_ptr & 0xF;
+
+		/* put a null character on the end of our string */
+		pba_num[10] = '\0';
+
+		/* switch all the data but the '-' to hex char */
+		for (offset = 0; offset < 10; offset++) {
+			if (pba_num[offset] < 0xA)
+				pba_num[offset] += '0';
+			else if (pba_num[offset] < 0x10)
+				pba_num[offset] += 'A' - 0xA;
+		}
+
+		return IXGBE_SUCCESS;
+	}
+
+	ret_val = hw->eeprom.ops.read(hw, pba_ptr, &length);
+	if (ret_val) {
+		DEBUGOUT("NVM Read Error\n");
+		return ret_val;
+	}
+
+	if (length == 0xFFFF || length == 0) {
+		DEBUGOUT("NVM PBA number section invalid length\n");
+		return IXGBE_ERR_PBA_SECTION;
+	}
+
+	/* check if pba_num buffer is big enough */
+	if (pba_num_size  < (((u32)length * 2) - 1)) {
+		DEBUGOUT("PBA string buffer too small\n");
+		return IXGBE_ERR_NO_SPACE;
+	}
+
+	/* trim pba length from start of string */
+	pba_ptr++;
+	length--;
+
+	for (offset = 0; offset < length; offset++) {
+		ret_val = hw->eeprom.ops.read(hw, pba_ptr + offset, &data);
+		if (ret_val) {
+			DEBUGOUT("NVM Read Error\n");
+			return ret_val;
+		}
+		pba_num[offset * 2] = (u8)(data >> 8);
+		pba_num[(offset * 2) + 1] = (u8)(data & 0xFF);
+	}
+	pba_num[offset * 2] = '\0';
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_read_pba_num_generic - Reads part number from EEPROM
+ *  @hw: pointer to hardware structure
+ *  @pba_num: stores the part number from the EEPROM
+ *
+ *  Reads the part number from the EEPROM.
+ **/
+s32 ixgbe_read_pba_num_generic(struct ixgbe_hw *hw, u32 *pba_num)
+{
+	s32 ret_val;
+	u16 data;
+
+	DEBUGFUNC("ixgbe_read_pba_num_generic");
+
+	ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM0_PTR, &data);
+	if (ret_val) {
+		DEBUGOUT("NVM Read Error\n");
+		return ret_val;
+	} else if (data == IXGBE_PBANUM_PTR_GUARD) {
+		DEBUGOUT("NVM Not supported\n");
+		return IXGBE_NOT_IMPLEMENTED;
+	}
+	*pba_num = (u32)(data << 16);
+
+	ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM1_PTR, &data);
+	if (ret_val) {
+		DEBUGOUT("NVM Read Error\n");
+		return ret_val;
+	}
+	*pba_num |= data;
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_read_pba_raw
+ *  @hw: pointer to the HW structure
+ *  @eeprom_buf: optional pointer to EEPROM image
+ *  @eeprom_buf_size: size of EEPROM image in words
+ *  @max_pba_block_size: PBA block size limit
+ *  @pba: pointer to output PBA structure
+ *
+ *  Reads PBA from EEPROM image when eeprom_buf is not NULL.
+ *  Reads PBA from physical EEPROM device when eeprom_buf is NULL.
+ *
+ **/
+s32 ixgbe_read_pba_raw(struct ixgbe_hw *hw, u16 *eeprom_buf,
+		       u32 eeprom_buf_size, u16 max_pba_block_size,
+		       struct ixgbe_pba *pba)
+{
+	s32 ret_val;
+	u16 pba_block_size;
+
+	if (pba == NULL)
+		return IXGBE_ERR_PARAM;
+
+	if (eeprom_buf == NULL) {
+		ret_val = hw->eeprom.ops.read_buffer(hw, IXGBE_PBANUM0_PTR, 2,
+						     &pba->word[0]);
+		if (ret_val)
+			return ret_val;
+	} else {
+		if (eeprom_buf_size > IXGBE_PBANUM1_PTR) {
+			pba->word[0] = eeprom_buf[IXGBE_PBANUM0_PTR];
+			pba->word[1] = eeprom_buf[IXGBE_PBANUM1_PTR];
+		} else {
+			return IXGBE_ERR_PARAM;
+		}
+	}
+
+	if (pba->word[0] == IXGBE_PBANUM_PTR_GUARD) {
+		if (pba->pba_block == NULL)
+			return IXGBE_ERR_PARAM;
+
+		ret_val = ixgbe_get_pba_block_size(hw, eeprom_buf,
+						   eeprom_buf_size,
+						   &pba_block_size);
+		if (ret_val)
+			return ret_val;
+
+		if (pba_block_size > max_pba_block_size)
+			return IXGBE_ERR_PARAM;
+
+		if (eeprom_buf == NULL) {
+			ret_val = hw->eeprom.ops.read_buffer(hw, pba->word[1],
+							     pba_block_size,
+							     pba->pba_block);
+			if (ret_val)
+				return ret_val;
+		} else {
+			if (eeprom_buf_size > (u32)(pba->word[1] +
+					      pba_block_size)) {
+				memcpy(pba->pba_block,
+				       &eeprom_buf[pba->word[1]],
+				       pba_block_size * sizeof(u16));
+			} else {
+				return IXGBE_ERR_PARAM;
+			}
+		}
+	}
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_write_pba_raw
+ *  @hw: pointer to the HW structure
+ *  @eeprom_buf: optional pointer to EEPROM image
+ *  @eeprom_buf_size: size of EEPROM image in words
+ *  @pba: pointer to PBA structure
+ *
+ *  Writes PBA to EEPROM image when eeprom_buf is not NULL.
+ *  Writes PBA to physical EEPROM device when eeprom_buf is NULL.
+ *
+ **/
+s32 ixgbe_write_pba_raw(struct ixgbe_hw *hw, u16 *eeprom_buf,
+			u32 eeprom_buf_size, struct ixgbe_pba *pba)
+{
+	s32 ret_val;
+
+	if (pba == NULL)
+		return IXGBE_ERR_PARAM;
+
+	if (eeprom_buf == NULL) {
+		ret_val = hw->eeprom.ops.write_buffer(hw, IXGBE_PBANUM0_PTR, 2,
+						      &pba->word[0]);
+		if (ret_val)
+			return ret_val;
+	} else {
+		if (eeprom_buf_size > IXGBE_PBANUM1_PTR) {
+			eeprom_buf[IXGBE_PBANUM0_PTR] = pba->word[0];
+			eeprom_buf[IXGBE_PBANUM1_PTR] = pba->word[1];
+		} else {
+			return IXGBE_ERR_PARAM;
+		}
+	}
+
+	if (pba->word[0] == IXGBE_PBANUM_PTR_GUARD) {
+		if (pba->pba_block == NULL)
+			return IXGBE_ERR_PARAM;
+
+		if (eeprom_buf == NULL) {
+			ret_val = hw->eeprom.ops.write_buffer(hw, pba->word[1],
+							      pba->pba_block[0],
+							      pba->pba_block);
+			if (ret_val)
+				return ret_val;
+		} else {
+			if (eeprom_buf_size > (u32)(pba->word[1] +
+					      pba->pba_block[0])) {
+				memcpy(&eeprom_buf[pba->word[1]],
+				       pba->pba_block,
+				       pba->pba_block[0] * sizeof(u16));
+			} else {
+				return IXGBE_ERR_PARAM;
+			}
+		}
+	}
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_get_pba_block_size
+ *  @hw: pointer to the HW structure
+ *  @eeprom_buf: optional pointer to EEPROM image
+ *  @eeprom_buf_size: size of EEPROM image in words
+ *  @pba_data_size: pointer to output variable
+ *
+ *  Returns the size of the PBA block in words. Function operates on EEPROM
+ *  image if the eeprom_buf pointer is not NULL otherwise it accesses physical
+ *  EEPROM device.
+ *
+ **/
+s32 ixgbe_get_pba_block_size(struct ixgbe_hw *hw, u16 *eeprom_buf,
+			     u32 eeprom_buf_size, u16 *pba_block_size)
+{
+	s32 ret_val;
+	u16 pba_word[2];
+	u16 length;
+
+	DEBUGFUNC("ixgbe_get_pba_block_size");
+
+	if (eeprom_buf == NULL) {
+		ret_val = hw->eeprom.ops.read_buffer(hw, IXGBE_PBANUM0_PTR, 2,
+						     &pba_word[0]);
+		if (ret_val)
+			return ret_val;
+	} else {
+		if (eeprom_buf_size > IXGBE_PBANUM1_PTR) {
+			pba_word[0] = eeprom_buf[IXGBE_PBANUM0_PTR];
+			pba_word[1] = eeprom_buf[IXGBE_PBANUM1_PTR];
+		} else {
+			return IXGBE_ERR_PARAM;
+		}
+	}
+
+	if (pba_word[0] == IXGBE_PBANUM_PTR_GUARD) {
+		if (eeprom_buf == NULL) {
+			ret_val = hw->eeprom.ops.read(hw, pba_word[1] + 0,
+						      &length);
+			if (ret_val)
+				return ret_val;
+		} else {
+			if (eeprom_buf_size > pba_word[1])
+				length = eeprom_buf[pba_word[1] + 0];
+			else
+				return IXGBE_ERR_PARAM;
+		}
+
+		if (length == 0xFFFF || length == 0)
+			return IXGBE_ERR_PBA_SECTION;
+	} else {
+		/* PBA number in legacy format, there is no PBA Block. */
+		length = 0;
+	}
+
+	if (pba_block_size != NULL)
+		*pba_block_size = length;
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_get_mac_addr_generic - Generic get MAC address
+ *  @hw: pointer to hardware structure
+ *  @mac_addr: Adapter MAC address
+ *
+ *  Reads the adapter's MAC address from first Receive Address Register (RAR0)
+ *  A reset of the adapter must be performed prior to calling this function
+ *  in order for the MAC address to have been loaded from the EEPROM into RAR0
+ **/
+s32 ixgbe_get_mac_addr_generic(struct ixgbe_hw *hw, u8 *mac_addr)
+{
+	u32 rar_high;
+	u32 rar_low;
+	u16 i;
+
+	DEBUGFUNC("ixgbe_get_mac_addr_generic");
+
+	rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(0));
+	rar_low = IXGBE_READ_REG(hw, IXGBE_RAL(0));
+
+	for (i = 0; i < 4; i++)
+		mac_addr[i] = (u8)(rar_low >> (i*8));
+
+	for (i = 0; i < 2; i++)
+		mac_addr[i+4] = (u8)(rar_high >> (i*8));
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_set_pci_config_data_generic - Generic store PCI bus info
+ *  @hw: pointer to hardware structure
+ *  @link_status: the link status returned by the PCI config space
+ *
+ *  Stores the PCI bus info (speed, width, type) within the ixgbe_hw structure
+ **/
+void ixgbe_set_pci_config_data_generic(struct ixgbe_hw *hw, u16 link_status)
+{
+	struct ixgbe_mac_info *mac = &hw->mac;
+
+	if (hw->bus.type == ixgbe_bus_type_unknown)
+		hw->bus.type = ixgbe_bus_type_pci_express;
+
+	switch (link_status & IXGBE_PCI_LINK_WIDTH) {
+	case IXGBE_PCI_LINK_WIDTH_1:
+		hw->bus.width = ixgbe_bus_width_pcie_x1;
+		break;
+	case IXGBE_PCI_LINK_WIDTH_2:
+		hw->bus.width = ixgbe_bus_width_pcie_x2;
+		break;
+	case IXGBE_PCI_LINK_WIDTH_4:
+		hw->bus.width = ixgbe_bus_width_pcie_x4;
+		break;
+	case IXGBE_PCI_LINK_WIDTH_8:
+		hw->bus.width = ixgbe_bus_width_pcie_x8;
+		break;
+	default:
+		hw->bus.width = ixgbe_bus_width_unknown;
+		break;
+	}
+
+	switch (link_status & IXGBE_PCI_LINK_SPEED) {
+	case IXGBE_PCI_LINK_SPEED_2500:
+		hw->bus.speed = ixgbe_bus_speed_2500;
+		break;
+	case IXGBE_PCI_LINK_SPEED_5000:
+		hw->bus.speed = ixgbe_bus_speed_5000;
+		break;
+	case IXGBE_PCI_LINK_SPEED_8000:
+		hw->bus.speed = ixgbe_bus_speed_8000;
+		break;
+	default:
+		hw->bus.speed = ixgbe_bus_speed_unknown;
+		break;
+	}
+
+	mac->ops.set_lan_id(hw);
+}
+
+/**
+ *  ixgbe_get_bus_info_generic - Generic set PCI bus info
+ *  @hw: pointer to hardware structure
+ *
+ *  Gets the PCI bus info (speed, width, type) then calls helper function to
+ *  store this data within the ixgbe_hw structure.
+ **/
+s32 ixgbe_get_bus_info_generic(struct ixgbe_hw *hw)
+{
+	u16 link_status;
+
+	DEBUGFUNC("ixgbe_get_bus_info_generic");
+
+	/* Get the negotiated link width and speed from PCI config space */
+	link_status = IXGBE_READ_PCIE_WORD(hw, IXGBE_PCI_LINK_STATUS);
+
+	ixgbe_set_pci_config_data_generic(hw, link_status);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_set_lan_id_multi_port_pcie - Set LAN id for PCIe multiple port devices
+ *  @hw: pointer to the HW structure
+ *
+ *  Determines the LAN function id by reading memory-mapped registers
+ *  and swaps the port value if requested.
+ **/
+void ixgbe_set_lan_id_multi_port_pcie(struct ixgbe_hw *hw)
+{
+	struct ixgbe_bus_info *bus = &hw->bus;
+	u32 reg;
+
+	DEBUGFUNC("ixgbe_set_lan_id_multi_port_pcie");
+
+	reg = IXGBE_READ_REG(hw, IXGBE_STATUS);
+	bus->func = (reg & IXGBE_STATUS_LAN_ID) >> IXGBE_STATUS_LAN_ID_SHIFT;
+	bus->lan_id = bus->func;
+
+	/* check for a port swap */
+	reg = IXGBE_READ_REG(hw, IXGBE_FACTPS_BY_MAC(hw));
+	if (reg & IXGBE_FACTPS_LFS)
+		bus->func ^= 0x1;
+}
+
+/**
+ *  ixgbe_stop_adapter_generic - Generic stop Tx/Rx units
+ *  @hw: pointer to hardware structure
+ *
+ *  Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts,
+ *  disables transmit and receive units. The adapter_stopped flag is used by
+ *  the shared code and drivers to determine if the adapter is in a stopped
+ *  state and should not touch the hardware.
+ **/
+s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw)
+{
+	u32 reg_val;
+	u16 i;
+
+	DEBUGFUNC("ixgbe_stop_adapter_generic");
+
+	/*
+	 * Set the adapter_stopped flag so other driver functions stop touching
+	 * the hardware
+	 */
+	hw->adapter_stopped = true;
+
+	/* Disable the receive unit */
+	ixgbe_disable_rx(hw);
+
+	/* Clear interrupt mask to stop interrupts from being generated */
+	IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_IRQ_CLEAR_MASK);
+
+	/* Clear any pending interrupts, flush previous writes */
+	IXGBE_READ_REG(hw, IXGBE_EICR);
+
+	/* Disable the transmit unit.  Each queue must be disabled. */
+	for (i = 0; i < hw->mac.max_tx_queues; i++)
+		IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(i), IXGBE_TXDCTL_SWFLSH);
+
+	/* Disable the receive unit by stopping each queue */
+	for (i = 0; i < hw->mac.max_rx_queues; i++) {
+		reg_val = IXGBE_READ_REG(hw, IXGBE_RXDCTL(i));
+		reg_val &= ~IXGBE_RXDCTL_ENABLE;
+		reg_val |= IXGBE_RXDCTL_SWFLSH;
+		IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(i), reg_val);
+	}
+
+	/* flush all queues disables */
+	IXGBE_WRITE_FLUSH(hw);
+	msec_delay(2);
+
+	/*
+	 * Prevent the PCI-E bus from hanging by disabling PCI-E master
+	 * access and verify no pending requests
+	 */
+	return ixgbe_disable_pcie_master(hw);
+}
+
+/**
+ *  ixgbe_led_on_generic - Turns on the software controllable LEDs.
+ *  @hw: pointer to hardware structure
+ *  @index: led number to turn on
+ **/
+s32 ixgbe_led_on_generic(struct ixgbe_hw *hw, u32 index)
+{
+	u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+
+	DEBUGFUNC("ixgbe_led_on_generic");
+
+	/* To turn on the LED, set mode to ON. */
+	led_reg &= ~IXGBE_LED_MODE_MASK(index);
+	led_reg |= IXGBE_LED_ON << IXGBE_LED_MODE_SHIFT(index);
+	IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
+	IXGBE_WRITE_FLUSH(hw);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_led_off_generic - Turns off the software controllable LEDs.
+ *  @hw: pointer to hardware structure
+ *  @index: led number to turn off
+ **/
+s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index)
+{
+	u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+
+	DEBUGFUNC("ixgbe_led_off_generic");
+
+	/* To turn off the LED, set mode to OFF. */
+	led_reg &= ~IXGBE_LED_MODE_MASK(index);
+	led_reg |= IXGBE_LED_OFF << IXGBE_LED_MODE_SHIFT(index);
+	IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
+	IXGBE_WRITE_FLUSH(hw);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_init_eeprom_params_generic - Initialize EEPROM params
+ *  @hw: pointer to hardware structure
+ *
+ *  Initializes the EEPROM parameters ixgbe_eeprom_info within the
+ *  ixgbe_hw struct in order to set up EEPROM access.
+ **/
+s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw)
+{
+	struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+	u32 eec;
+	u16 eeprom_size;
+
+	DEBUGFUNC("ixgbe_init_eeprom_params_generic");
+
+	if (eeprom->type == ixgbe_eeprom_uninitialized) {
+		eeprom->type = ixgbe_eeprom_none;
+		/* Set default semaphore delay to 10ms which is a well
+		 * tested value */
+		eeprom->semaphore_delay = 10;
+		/* Clear EEPROM page size, it will be initialized as needed */
+		eeprom->word_page_size = 0;
+
+		/*
+		 * Check for EEPROM present first.
+		 * If not present leave as none
+		 */
+		eec = IXGBE_READ_REG(hw, IXGBE_EEC_BY_MAC(hw));
+		if (eec & IXGBE_EEC_PRES) {
+			eeprom->type = ixgbe_eeprom_spi;
+
+			/*
+			 * SPI EEPROM is assumed here.  This code would need to
+			 * change if a future EEPROM is not SPI.
+			 */
+			eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >>
+					    IXGBE_EEC_SIZE_SHIFT);
+			eeprom->word_size = 1 << (eeprom_size +
+					     IXGBE_EEPROM_WORD_SIZE_SHIFT);
+		}
+
+		if (eec & IXGBE_EEC_ADDR_SIZE)
+			eeprom->address_bits = 16;
+		else
+			eeprom->address_bits = 8;
+		DEBUGOUT3("Eeprom params: type = %d, size = %d, address bits: "
+			  "%d\n", eeprom->type, eeprom->word_size,
+			  eeprom->address_bits);
+	}
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_write_eeprom_buffer_bit_bang_generic - Write EEPROM using bit-bang
+ *  @hw: pointer to hardware structure
+ *  @offset: offset within the EEPROM to write
+ *  @words: number of word(s)
+ *  @data: 16 bit word(s) to write to EEPROM
+ *
+ *  Reads 16 bit word(s) from EEPROM through bit-bang method
+ **/
+s32 ixgbe_write_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
+					       u16 words, u16 *data)
+{
+	s32 status = IXGBE_SUCCESS;
+	u16 i, count;
+
+	DEBUGFUNC("ixgbe_write_eeprom_buffer_bit_bang_generic");
+
+	hw->eeprom.ops.init_params(hw);
+
+	if (words == 0) {
+		status = IXGBE_ERR_INVALID_ARGUMENT;
+		goto out;
+	}
+
+	if (offset + words > hw->eeprom.word_size) {
+		status = IXGBE_ERR_EEPROM;
+		goto out;
+	}
+
+	/*
+	 * The EEPROM page size cannot be queried from the chip. We do lazy
+	 * initialization. It is worth to do that when we write large buffer.
+	 */
+	if ((hw->eeprom.word_page_size == 0) &&
+	    (words > IXGBE_EEPROM_PAGE_SIZE_MAX))
+		ixgbe_detect_eeprom_page_size_generic(hw, offset);
+
+	/*
+	 * We cannot hold synchronization semaphores for too long
+	 * to avoid other entity starvation. However it is more efficient
+	 * to read in bursts than synchronizing access for each word.
+	 */
+	for (i = 0; i < words; i += IXGBE_EEPROM_RD_BUFFER_MAX_COUNT) {
+		count = (words - i) / IXGBE_EEPROM_RD_BUFFER_MAX_COUNT > 0 ?
+			IXGBE_EEPROM_RD_BUFFER_MAX_COUNT : (words - i);
+		status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset + i,
+							    count, &data[i]);
+
+		if (status != IXGBE_SUCCESS)
+			break;
+	}
+
+out:
+	return status;
+}
+
+/**
+ *  ixgbe_write_eeprom_buffer_bit_bang - Writes 16 bit word(s) to EEPROM
+ *  @hw: pointer to hardware structure
+ *  @offset: offset within the EEPROM to be written to
+ *  @words: number of word(s)
+ *  @data: 16 bit word(s) to be written to the EEPROM
+ *
+ *  If ixgbe_eeprom_update_checksum is not called after this function, the
+ *  EEPROM will most likely contain an invalid checksum.
+ **/
+STATIC s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset,
+					      u16 words, u16 *data)
+{
+	s32 status;
+	u16 word;
+	u16 page_size;
+	u16 i;
+	u8 write_opcode = IXGBE_EEPROM_WRITE_OPCODE_SPI;
+
+	DEBUGFUNC("ixgbe_write_eeprom_buffer_bit_bang");
+
+	/* Prepare the EEPROM for writing  */
+	status = ixgbe_acquire_eeprom(hw);
+
+	if (status == IXGBE_SUCCESS) {
+		if (ixgbe_ready_eeprom(hw) != IXGBE_SUCCESS) {
+			ixgbe_release_eeprom(hw);
+			status = IXGBE_ERR_EEPROM;
+		}
+	}
+
+	if (status == IXGBE_SUCCESS) {
+		for (i = 0; i < words; i++) {
+			ixgbe_standby_eeprom(hw);
+
+			/*  Send the WRITE ENABLE command (8 bit opcode )  */
+			ixgbe_shift_out_eeprom_bits(hw,
+						   IXGBE_EEPROM_WREN_OPCODE_SPI,
+						   IXGBE_EEPROM_OPCODE_BITS);
+
+			ixgbe_standby_eeprom(hw);
+
+			/*
+			 * Some SPI eeproms use the 8th address bit embedded
+			 * in the opcode
+			 */
+			if ((hw->eeprom.address_bits == 8) &&
+			    ((offset + i) >= 128))
+				write_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI;
+
+			/* Send the Write command (8-bit opcode + addr) */
+			ixgbe_shift_out_eeprom_bits(hw, write_opcode,
+						    IXGBE_EEPROM_OPCODE_BITS);
+			ixgbe_shift_out_eeprom_bits(hw, (u16)((offset + i) * 2),
+						    hw->eeprom.address_bits);
+
+			page_size = hw->eeprom.word_page_size;
+
+			/* Send the data in burst via SPI*/
+			do {
+				word = data[i];
+				word = (word >> 8) | (word << 8);
+				ixgbe_shift_out_eeprom_bits(hw, word, 16);
+
+				if (page_size == 0)
+					break;
+
+				/* do not wrap around page */
+				if (((offset + i) & (page_size - 1)) ==
+				    (page_size - 1))
+					break;
+			} while (++i < words);
+
+			ixgbe_standby_eeprom(hw);
+			msec_delay(10);
+		}
+		/* Done with writing - release the EEPROM */
+		ixgbe_release_eeprom(hw);
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_write_eeprom_generic - Writes 16 bit value to EEPROM
+ *  @hw: pointer to hardware structure
+ *  @offset: offset within the EEPROM to be written to
+ *  @data: 16 bit word to be written to the EEPROM
+ *
+ *  If ixgbe_eeprom_update_checksum is not called after this function, the
+ *  EEPROM will most likely contain an invalid checksum.
+ **/
+s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data)
+{
+	s32 status;
+
+	DEBUGFUNC("ixgbe_write_eeprom_generic");
+
+	hw->eeprom.ops.init_params(hw);
+
+	if (offset >= hw->eeprom.word_size) {
+		status = IXGBE_ERR_EEPROM;
+		goto out;
+	}
+
+	status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset, 1, &data);
+
+out:
+	return status;
+}
+
+/**
+ *  ixgbe_read_eeprom_buffer_bit_bang_generic - Read EEPROM using bit-bang
+ *  @hw: pointer to hardware structure
+ *  @offset: offset within the EEPROM to be read
+ *  @data: read 16 bit words(s) from EEPROM
+ *  @words: number of word(s)
+ *
+ *  Reads 16 bit word(s) from EEPROM through bit-bang method
+ **/
+s32 ixgbe_read_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
+					      u16 words, u16 *data)
+{
+	s32 status = IXGBE_SUCCESS;
+	u16 i, count;
+
+	DEBUGFUNC("ixgbe_read_eeprom_buffer_bit_bang_generic");
+
+	hw->eeprom.ops.init_params(hw);
+
+	if (words == 0) {
+		status = IXGBE_ERR_INVALID_ARGUMENT;
+		goto out;
+	}
+
+	if (offset + words > hw->eeprom.word_size) {
+		status = IXGBE_ERR_EEPROM;
+		goto out;
+	}
+
+	/*
+	 * We cannot hold synchronization semaphores for too long
+	 * to avoid other entity starvation. However it is more efficient
+	 * to read in bursts than synchronizing access for each word.
+	 */
+	for (i = 0; i < words; i += IXGBE_EEPROM_RD_BUFFER_MAX_COUNT) {
+		count = (words - i) / IXGBE_EEPROM_RD_BUFFER_MAX_COUNT > 0 ?
+			IXGBE_EEPROM_RD_BUFFER_MAX_COUNT : (words - i);
+
+		status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset + i,
+							   count, &data[i]);
+
+		if (status != IXGBE_SUCCESS)
+			break;
+	}
+
+out:
+	return status;
+}
+
+/**
+ *  ixgbe_read_eeprom_buffer_bit_bang - Read EEPROM using bit-bang
+ *  @hw: pointer to hardware structure
+ *  @offset: offset within the EEPROM to be read
+ *  @words: number of word(s)
+ *  @data: read 16 bit word(s) from EEPROM
+ *
+ *  Reads 16 bit word(s) from EEPROM through bit-bang method
+ **/
+STATIC s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset,
+					     u16 words, u16 *data)
+{
+	s32 status;
+	u16 word_in;
+	u8 read_opcode = IXGBE_EEPROM_READ_OPCODE_SPI;
+	u16 i;
+
+	DEBUGFUNC("ixgbe_read_eeprom_buffer_bit_bang");
+
+	/* Prepare the EEPROM for reading  */
+	status = ixgbe_acquire_eeprom(hw);
+
+	if (status == IXGBE_SUCCESS) {
+		if (ixgbe_ready_eeprom(hw) != IXGBE_SUCCESS) {
+			ixgbe_release_eeprom(hw);
+			status = IXGBE_ERR_EEPROM;
+		}
+	}
+
+	if (status == IXGBE_SUCCESS) {
+		for (i = 0; i < words; i++) {
+			ixgbe_standby_eeprom(hw);
+			/*
+			 * Some SPI eeproms use the 8th address bit embedded
+			 * in the opcode
+			 */
+			if ((hw->eeprom.address_bits == 8) &&
+			    ((offset + i) >= 128))
+				read_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI;
+
+			/* Send the READ command (opcode + addr) */
+			ixgbe_shift_out_eeprom_bits(hw, read_opcode,
+						    IXGBE_EEPROM_OPCODE_BITS);
+			ixgbe_shift_out_eeprom_bits(hw, (u16)((offset + i) * 2),
+						    hw->eeprom.address_bits);
+
+			/* Read the data. */
+			word_in = ixgbe_shift_in_eeprom_bits(hw, 16);
+			data[i] = (word_in >> 8) | (word_in << 8);
+		}
+
+		/* End this read operation */
+		ixgbe_release_eeprom(hw);
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_read_eeprom_bit_bang_generic - Read EEPROM word using bit-bang
+ *  @hw: pointer to hardware structure
+ *  @offset: offset within the EEPROM to be read
+ *  @data: read 16 bit value from EEPROM
+ *
+ *  Reads 16 bit value from EEPROM through bit-bang method
+ **/
+s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
+				       u16 *data)
+{
+	s32 status;
+
+	DEBUGFUNC("ixgbe_read_eeprom_bit_bang_generic");
+
+	hw->eeprom.ops.init_params(hw);
+
+	if (offset >= hw->eeprom.word_size) {
+		status = IXGBE_ERR_EEPROM;
+		goto out;
+	}
+
+	status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset, 1, data);
+
+out:
+	return status;
+}
+
+/**
+ *  ixgbe_read_eerd_buffer_generic - Read EEPROM word(s) using EERD
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of word in the EEPROM to read
+ *  @words: number of word(s)
+ *  @data: 16 bit word(s) from the EEPROM
+ *
+ *  Reads a 16 bit word(s) from the EEPROM using the EERD register.
+ **/
+s32 ixgbe_read_eerd_buffer_generic(struct ixgbe_hw *hw, u16 offset,
+				   u16 words, u16 *data)
+{
+	u32 eerd;
+	s32 status = IXGBE_SUCCESS;
+	u32 i;
+
+	DEBUGFUNC("ixgbe_read_eerd_buffer_generic");
+
+	hw->eeprom.ops.init_params(hw);
+
+	if (words == 0) {
+		status = IXGBE_ERR_INVALID_ARGUMENT;
+		ERROR_REPORT1(IXGBE_ERROR_ARGUMENT, "Invalid EEPROM words");
+		goto out;
+	}
+
+	if (offset >= hw->eeprom.word_size) {
+		status = IXGBE_ERR_EEPROM;
+		ERROR_REPORT1(IXGBE_ERROR_ARGUMENT, "Invalid EEPROM offset");
+		goto out;
+	}
+
+	for (i = 0; i < words; i++) {
+		eerd = ((offset + i) << IXGBE_EEPROM_RW_ADDR_SHIFT) |
+		       IXGBE_EEPROM_RW_REG_START;
+
+		IXGBE_WRITE_REG(hw, IXGBE_EERD, eerd);
+		status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_READ);
+
+		if (status == IXGBE_SUCCESS) {
+			data[i] = (IXGBE_READ_REG(hw, IXGBE_EERD) >>
+				   IXGBE_EEPROM_RW_REG_DATA);
+		} else {
+			DEBUGOUT("Eeprom read timed out\n");
+			goto out;
+		}
+	}
+out:
+	return status;
+}
+
+/**
+ *  ixgbe_detect_eeprom_page_size_generic - Detect EEPROM page size
+ *  @hw: pointer to hardware structure
+ *  @offset: offset within the EEPROM to be used as a scratch pad
+ *
+ *  Discover EEPROM page size by writing marching data at given offset.
+ *  This function is called only when we are writing a new large buffer
+ *  at given offset so the data would be overwritten anyway.
+ **/
+STATIC s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw,
+						 u16 offset)
+{
+	u16 data[IXGBE_EEPROM_PAGE_SIZE_MAX];
+	s32 status = IXGBE_SUCCESS;
+	u16 i;
+
+	DEBUGFUNC("ixgbe_detect_eeprom_page_size_generic");
+
+	for (i = 0; i < IXGBE_EEPROM_PAGE_SIZE_MAX; i++)
+		data[i] = i;
+
+	hw->eeprom.word_page_size = IXGBE_EEPROM_PAGE_SIZE_MAX;
+	status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset,
+					     IXGBE_EEPROM_PAGE_SIZE_MAX, data);
+	hw->eeprom.word_page_size = 0;
+	if (status != IXGBE_SUCCESS)
+		goto out;
+
+	status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset, 1, data);
+	if (status != IXGBE_SUCCESS)
+		goto out;
+
+	/*
+	 * When writing in burst more than the actual page size
+	 * EEPROM address wraps around current page.
+	 */
+	hw->eeprom.word_page_size = IXGBE_EEPROM_PAGE_SIZE_MAX - data[0];
+
+	DEBUGOUT1("Detected EEPROM page size = %d words.",
+		  hw->eeprom.word_page_size);
+out:
+	return status;
+}
+
+/**
+ *  ixgbe_read_eerd_generic - Read EEPROM word using EERD
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to read
+ *  @data: word read from the EEPROM
+ *
+ *  Reads a 16 bit word from the EEPROM using the EERD register.
+ **/
+s32 ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data)
+{
+	return ixgbe_read_eerd_buffer_generic(hw, offset, 1, data);
+}
+
+/**
+ *  ixgbe_write_eewr_buffer_generic - Write EEPROM word(s) using EEWR
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to write
+ *  @words: number of word(s)
+ *  @data: word(s) write to the EEPROM
+ *
+ *  Write a 16 bit word(s) to the EEPROM using the EEWR register.
+ **/
+s32 ixgbe_write_eewr_buffer_generic(struct ixgbe_hw *hw, u16 offset,
+				    u16 words, u16 *data)
+{
+	u32 eewr;
+	s32 status = IXGBE_SUCCESS;
+	u16 i;
+
+	DEBUGFUNC("ixgbe_write_eewr_generic");
+
+	hw->eeprom.ops.init_params(hw);
+
+	if (words == 0) {
+		status = IXGBE_ERR_INVALID_ARGUMENT;
+		ERROR_REPORT1(IXGBE_ERROR_ARGUMENT, "Invalid EEPROM words");
+		goto out;
+	}
+
+	if (offset >= hw->eeprom.word_size) {
+		status = IXGBE_ERR_EEPROM;
+		ERROR_REPORT1(IXGBE_ERROR_ARGUMENT, "Invalid EEPROM offset");
+		goto out;
+	}
+
+	for (i = 0; i < words; i++) {
+		eewr = ((offset + i) << IXGBE_EEPROM_RW_ADDR_SHIFT) |
+			(data[i] << IXGBE_EEPROM_RW_REG_DATA) |
+			IXGBE_EEPROM_RW_REG_START;
+
+		status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE);
+		if (status != IXGBE_SUCCESS) {
+			DEBUGOUT("Eeprom write EEWR timed out\n");
+			goto out;
+		}
+
+		IXGBE_WRITE_REG(hw, IXGBE_EEWR, eewr);
+
+		status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE);
+		if (status != IXGBE_SUCCESS) {
+			DEBUGOUT("Eeprom write EEWR timed out\n");
+			goto out;
+		}
+	}
+
+out:
+	return status;
+}
+
+/**
+ *  ixgbe_write_eewr_generic - Write EEPROM word using EEWR
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to write
+ *  @data: word write to the EEPROM
+ *
+ *  Write a 16 bit word to the EEPROM using the EEWR register.
+ **/
+s32 ixgbe_write_eewr_generic(struct ixgbe_hw *hw, u16 offset, u16 data)
+{
+	return ixgbe_write_eewr_buffer_generic(hw, offset, 1, &data);
+}
+
+/**
+ *  ixgbe_poll_eerd_eewr_done - Poll EERD read or EEWR write status
+ *  @hw: pointer to hardware structure
+ *  @ee_reg: EEPROM flag for polling
+ *
+ *  Polls the status bit (bit 1) of the EERD or EEWR to determine when the
+ *  read or write is done respectively.
+ **/
+s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg)
+{
+	u32 i;
+	u32 reg;
+	s32 status = IXGBE_ERR_EEPROM;
+
+	DEBUGFUNC("ixgbe_poll_eerd_eewr_done");
+
+	for (i = 0; i < IXGBE_EERD_EEWR_ATTEMPTS; i++) {
+		if (ee_reg == IXGBE_NVM_POLL_READ)
+			reg = IXGBE_READ_REG(hw, IXGBE_EERD);
+		else
+			reg = IXGBE_READ_REG(hw, IXGBE_EEWR);
+
+		if (reg & IXGBE_EEPROM_RW_REG_DONE) {
+			status = IXGBE_SUCCESS;
+			break;
+		}
+		usec_delay(5);
+	}
+
+	if (i == IXGBE_EERD_EEWR_ATTEMPTS)
+		ERROR_REPORT1(IXGBE_ERROR_POLLING,
+			     "EEPROM read/write done polling timed out");
+
+	return status;
+}
+
+/**
+ *  ixgbe_acquire_eeprom - Acquire EEPROM using bit-bang
+ *  @hw: pointer to hardware structure
+ *
+ *  Prepares EEPROM for access using bit-bang method. This function should
+ *  be called before issuing a command to the EEPROM.
+ **/
+STATIC s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw)
+{
+	s32 status = IXGBE_SUCCESS;
+	u32 eec;
+	u32 i;
+
+	DEBUGFUNC("ixgbe_acquire_eeprom");
+
+	if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM)
+	    != IXGBE_SUCCESS)
+		status = IXGBE_ERR_SWFW_SYNC;
+
+	if (status == IXGBE_SUCCESS) {
+		eec = IXGBE_READ_REG(hw, IXGBE_EEC_BY_MAC(hw));
+
+		/* Request EEPROM Access */
+		eec |= IXGBE_EEC_REQ;
+		IXGBE_WRITE_REG(hw, IXGBE_EEC_BY_MAC(hw), eec);
+
+		for (i = 0; i < IXGBE_EEPROM_GRANT_ATTEMPTS; i++) {
+			eec = IXGBE_READ_REG(hw, IXGBE_EEC_BY_MAC(hw));
+			if (eec & IXGBE_EEC_GNT)
+				break;
+			usec_delay(5);
+		}
+
+		/* Release if grant not acquired */
+		if (!(eec & IXGBE_EEC_GNT)) {
+			eec &= ~IXGBE_EEC_REQ;
+			IXGBE_WRITE_REG(hw, IXGBE_EEC_BY_MAC(hw), eec);
+			DEBUGOUT("Could not acquire EEPROM grant\n");
+
+			hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+			status = IXGBE_ERR_EEPROM;
+		}
+
+		/* Setup EEPROM for Read/Write */
+		if (status == IXGBE_SUCCESS) {
+			/* Clear CS and SK */
+			eec &= ~(IXGBE_EEC_CS | IXGBE_EEC_SK);
+			IXGBE_WRITE_REG(hw, IXGBE_EEC_BY_MAC(hw), eec);
+			IXGBE_WRITE_FLUSH(hw);
+			usec_delay(1);
+		}
+	}
+	return status;
+}
+
+/**
+ *  ixgbe_get_eeprom_semaphore - Get hardware semaphore
+ *  @hw: pointer to hardware structure
+ *
+ *  Sets the hardware semaphores so EEPROM access can occur for bit-bang method
+ **/
+STATIC s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw)
+{
+	s32 status = IXGBE_ERR_EEPROM;
+	u32 timeout = 2000;
+	u32 i;
+	u32 swsm;
+
+	DEBUGFUNC("ixgbe_get_eeprom_semaphore");
+
+
+	/* Get SMBI software semaphore between device drivers first */
+	for (i = 0; i < timeout; i++) {
+		/*
+		 * If the SMBI bit is 0 when we read it, then the bit will be
+		 * set and we have the semaphore
+		 */
+		swsm = IXGBE_READ_REG(hw, IXGBE_SWSM_BY_MAC(hw));
+		if (!(swsm & IXGBE_SWSM_SMBI)) {
+			status = IXGBE_SUCCESS;
+			break;
+		}
+		usec_delay(50);
+	}
+
+	if (i == timeout) {
+		DEBUGOUT("Driver can't access the Eeprom - SMBI Semaphore "
+			 "not granted.\n");
+		/*
+		 * this release is particularly important because our attempts
+		 * above to get the semaphore may have succeeded, and if there
+		 * was a timeout, we should unconditionally clear the semaphore
+		 * bits to free the driver to make progress
+		 */
+		ixgbe_release_eeprom_semaphore(hw);
+
+		usec_delay(50);
+		/*
+		 * one last try
+		 * If the SMBI bit is 0 when we read it, then the bit will be
+		 * set and we have the semaphore
+		 */
+		swsm = IXGBE_READ_REG(hw, IXGBE_SWSM_BY_MAC(hw));
+		if (!(swsm & IXGBE_SWSM_SMBI))
+			status = IXGBE_SUCCESS;
+	}
+
+	/* Now get the semaphore between SW/FW through the SWESMBI bit */
+	if (status == IXGBE_SUCCESS) {
+		for (i = 0; i < timeout; i++) {
+			swsm = IXGBE_READ_REG(hw, IXGBE_SWSM_BY_MAC(hw));
+
+			/* Set the SW EEPROM semaphore bit to request access */
+			swsm |= IXGBE_SWSM_SWESMBI;
+			IXGBE_WRITE_REG(hw, IXGBE_SWSM_BY_MAC(hw), swsm);
+
+			/*
+			 * If we set the bit successfully then we got the
+			 * semaphore.
+			 */
+			swsm = IXGBE_READ_REG(hw, IXGBE_SWSM_BY_MAC(hw));
+			if (swsm & IXGBE_SWSM_SWESMBI)
+				break;
+
+			usec_delay(50);
+		}
+
+		/*
+		 * Release semaphores and return error if SW EEPROM semaphore
+		 * was not granted because we don't have access to the EEPROM
+		 */
+		if (i >= timeout) {
+			ERROR_REPORT1(IXGBE_ERROR_POLLING,
+			    "SWESMBI Software EEPROM semaphore not granted.\n");
+			ixgbe_release_eeprom_semaphore(hw);
+			status = IXGBE_ERR_EEPROM;
+		}
+	} else {
+		ERROR_REPORT1(IXGBE_ERROR_POLLING,
+			     "Software semaphore SMBI between device drivers "
+			     "not granted.\n");
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_release_eeprom_semaphore - Release hardware semaphore
+ *  @hw: pointer to hardware structure
+ *
+ *  This function clears hardware semaphore bits.
+ **/
+STATIC void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw)
+{
+	u32 swsm;
+
+	DEBUGFUNC("ixgbe_release_eeprom_semaphore");
+
+	swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
+
+	/* Release both semaphores by writing 0 to the bits SWESMBI and SMBI */
+	swsm &= ~(IXGBE_SWSM_SWESMBI | IXGBE_SWSM_SMBI);
+	IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm);
+	IXGBE_WRITE_FLUSH(hw);
+}
+
+/**
+ *  ixgbe_ready_eeprom - Polls for EEPROM ready
+ *  @hw: pointer to hardware structure
+ **/
+STATIC s32 ixgbe_ready_eeprom(struct ixgbe_hw *hw)
+{
+	s32 status = IXGBE_SUCCESS;
+	u16 i;
+	u8 spi_stat_reg;
+
+	DEBUGFUNC("ixgbe_ready_eeprom");
+
+	/*
+	 * Read "Status Register" repeatedly until the LSB is cleared.  The
+	 * EEPROM will signal that the command has been completed by clearing
+	 * bit 0 of the internal status register.  If it's not cleared within
+	 * 5 milliseconds, then error out.
+	 */
+	for (i = 0; i < IXGBE_EEPROM_MAX_RETRY_SPI; i += 5) {
+		ixgbe_shift_out_eeprom_bits(hw, IXGBE_EEPROM_RDSR_OPCODE_SPI,
+					    IXGBE_EEPROM_OPCODE_BITS);
+		spi_stat_reg = (u8)ixgbe_shift_in_eeprom_bits(hw, 8);
+		if (!(spi_stat_reg & IXGBE_EEPROM_STATUS_RDY_SPI))
+			break;
+
+		usec_delay(5);
+		ixgbe_standby_eeprom(hw);
+	};
+
+	/*
+	 * On some parts, SPI write time could vary from 0-20mSec on 3.3V
+	 * devices (and only 0-5mSec on 5V devices)
+	 */
+	if (i >= IXGBE_EEPROM_MAX_RETRY_SPI) {
+		DEBUGOUT("SPI EEPROM Status error\n");
+		status = IXGBE_ERR_EEPROM;
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_standby_eeprom - Returns EEPROM to a "standby" state
+ *  @hw: pointer to hardware structure
+ **/
+STATIC void ixgbe_standby_eeprom(struct ixgbe_hw *hw)
+{
+	u32 eec;
+
+	DEBUGFUNC("ixgbe_standby_eeprom");
+
+	eec = IXGBE_READ_REG(hw, IXGBE_EEC_BY_MAC(hw));
+
+	/* Toggle CS to flush commands */
+	eec |= IXGBE_EEC_CS;
+	IXGBE_WRITE_REG(hw, IXGBE_EEC_BY_MAC(hw), eec);
+	IXGBE_WRITE_FLUSH(hw);
+	usec_delay(1);
+	eec &= ~IXGBE_EEC_CS;
+	IXGBE_WRITE_REG(hw, IXGBE_EEC_BY_MAC(hw), eec);
+	IXGBE_WRITE_FLUSH(hw);
+	usec_delay(1);
+}
+
+/**
+ *  ixgbe_shift_out_eeprom_bits - Shift data bits out to the EEPROM.
+ *  @hw: pointer to hardware structure
+ *  @data: data to send to the EEPROM
+ *  @count: number of bits to shift out
+ **/
+STATIC void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data,
+					u16 count)
+{
+	u32 eec;
+	u32 mask;
+	u32 i;
+
+	DEBUGFUNC("ixgbe_shift_out_eeprom_bits");
+
+	eec = IXGBE_READ_REG(hw, IXGBE_EEC_BY_MAC(hw));
+
+	/*
+	 * Mask is used to shift "count" bits of "data" out to the EEPROM
+	 * one bit at a time.  Determine the starting bit based on count
+	 */
+	mask = 0x01 << (count - 1);
+
+	for (i = 0; i < count; i++) {
+		/*
+		 * A "1" is shifted out to the EEPROM by setting bit "DI" to a
+		 * "1", and then raising and then lowering the clock (the SK
+		 * bit controls the clock input to the EEPROM).  A "0" is
+		 * shifted out to the EEPROM by setting "DI" to "0" and then
+		 * raising and then lowering the clock.
+		 */
+		if (data & mask)
+			eec |= IXGBE_EEC_DI;
+		else
+			eec &= ~IXGBE_EEC_DI;
+
+		IXGBE_WRITE_REG(hw, IXGBE_EEC_BY_MAC(hw), eec);
+		IXGBE_WRITE_FLUSH(hw);
+
+		usec_delay(1);
+
+		ixgbe_raise_eeprom_clk(hw, &eec);
+		ixgbe_lower_eeprom_clk(hw, &eec);
+
+		/*
+		 * Shift mask to signify next bit of data to shift in to the
+		 * EEPROM
+		 */
+		mask = mask >> 1;
+	};
+
+	/* We leave the "DI" bit set to "0" when we leave this routine. */
+	eec &= ~IXGBE_EEC_DI;
+	IXGBE_WRITE_REG(hw, IXGBE_EEC_BY_MAC(hw), eec);
+	IXGBE_WRITE_FLUSH(hw);
+}
+
+/**
+ *  ixgbe_shift_in_eeprom_bits - Shift data bits in from the EEPROM
+ *  @hw: pointer to hardware structure
+ **/
+STATIC u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count)
+{
+	u32 eec;
+	u32 i;
+	u16 data = 0;
+
+	DEBUGFUNC("ixgbe_shift_in_eeprom_bits");
+
+	/*
+	 * In order to read a register from the EEPROM, we need to shift
+	 * 'count' bits in from the EEPROM. Bits are "shifted in" by raising
+	 * the clock input to the EEPROM (setting the SK bit), and then reading
+	 * the value of the "DO" bit.  During this "shifting in" process the
+	 * "DI" bit should always be clear.
+	 */
+	eec = IXGBE_READ_REG(hw, IXGBE_EEC_BY_MAC(hw));
+
+	eec &= ~(IXGBE_EEC_DO | IXGBE_EEC_DI);
+
+	for (i = 0; i < count; i++) {
+		data = data << 1;
+		ixgbe_raise_eeprom_clk(hw, &eec);
+
+		eec = IXGBE_READ_REG(hw, IXGBE_EEC_BY_MAC(hw));
+
+		eec &= ~(IXGBE_EEC_DI);
+		if (eec & IXGBE_EEC_DO)
+			data |= 1;
+
+		ixgbe_lower_eeprom_clk(hw, &eec);
+	}
+
+	return data;
+}
+
+/**
+ *  ixgbe_raise_eeprom_clk - Raises the EEPROM's clock input.
+ *  @hw: pointer to hardware structure
+ *  @eec: EEC register's current value
+ **/
+STATIC void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec)
+{
+	DEBUGFUNC("ixgbe_raise_eeprom_clk");
+
+	/*
+	 * Raise the clock input to the EEPROM
+	 * (setting the SK bit), then delay
+	 */
+	*eec = *eec | IXGBE_EEC_SK;
+	IXGBE_WRITE_REG(hw, IXGBE_EEC_BY_MAC(hw), *eec);
+	IXGBE_WRITE_FLUSH(hw);
+	usec_delay(1);
+}
+
+/**
+ *  ixgbe_lower_eeprom_clk - Lowers the EEPROM's clock input.
+ *  @hw: pointer to hardware structure
+ *  @eecd: EECD's current value
+ **/
+STATIC void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec)
+{
+	DEBUGFUNC("ixgbe_lower_eeprom_clk");
+
+	/*
+	 * Lower the clock input to the EEPROM (clearing the SK bit), then
+	 * delay
+	 */
+	*eec = *eec & ~IXGBE_EEC_SK;
+	IXGBE_WRITE_REG(hw, IXGBE_EEC_BY_MAC(hw), *eec);
+	IXGBE_WRITE_FLUSH(hw);
+	usec_delay(1);
+}
+
+/**
+ *  ixgbe_release_eeprom - Release EEPROM, release semaphores
+ *  @hw: pointer to hardware structure
+ **/
+STATIC void ixgbe_release_eeprom(struct ixgbe_hw *hw)
+{
+	u32 eec;
+
+	DEBUGFUNC("ixgbe_release_eeprom");
+
+	eec = IXGBE_READ_REG(hw, IXGBE_EEC_BY_MAC(hw));
+
+	eec |= IXGBE_EEC_CS;  /* Pull CS high */
+	eec &= ~IXGBE_EEC_SK; /* Lower SCK */
+
+	IXGBE_WRITE_REG(hw, IXGBE_EEC_BY_MAC(hw), eec);
+	IXGBE_WRITE_FLUSH(hw);
+
+	usec_delay(1);
+
+	/* Stop requesting EEPROM access */
+	eec &= ~IXGBE_EEC_REQ;
+	IXGBE_WRITE_REG(hw, IXGBE_EEC_BY_MAC(hw), eec);
+
+	hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+
+	/* Delay before attempt to obtain semaphore again to allow FW access */
+	msec_delay(hw->eeprom.semaphore_delay);
+}
+
+/**
+ *  ixgbe_calc_eeprom_checksum_generic - Calculates and returns the checksum
+ *  @hw: pointer to hardware structure
+ *
+ *  Returns a negative error code on error, or the 16-bit checksum
+ **/
+s32 ixgbe_calc_eeprom_checksum_generic(struct ixgbe_hw *hw)
+{
+	u16 i;
+	u16 j;
+	u16 checksum = 0;
+	u16 length = 0;
+	u16 pointer = 0;
+	u16 word = 0;
+
+	DEBUGFUNC("ixgbe_calc_eeprom_checksum_generic");
+
+	/* Include 0x0-0x3F in the checksum */
+	for (i = 0; i < IXGBE_EEPROM_CHECKSUM; i++) {
+		if (hw->eeprom.ops.read(hw, i, &word)) {
+			DEBUGOUT("EEPROM read failed\n");
+			return IXGBE_ERR_EEPROM;
+		}
+		checksum += word;
+	}
+
+	/* Include all data from pointers except for the fw pointer */
+	for (i = IXGBE_PCIE_ANALOG_PTR; i < IXGBE_FW_PTR; i++) {
+		if (hw->eeprom.ops.read(hw, i, &pointer)) {
+			DEBUGOUT("EEPROM read failed\n");
+			return IXGBE_ERR_EEPROM;
+		}
+
+		/* If the pointer seems invalid */
+		if (pointer == 0xFFFF || pointer == 0)
+			continue;
+
+		if (hw->eeprom.ops.read(hw, pointer, &length)) {
+			DEBUGOUT("EEPROM read failed\n");
+			return IXGBE_ERR_EEPROM;
+		}
+
+		if (length == 0xFFFF || length == 0)
+			continue;
+
+		for (j = pointer + 1; j <= pointer + length; j++) {
+			if (hw->eeprom.ops.read(hw, j, &word)) {
+				DEBUGOUT("EEPROM read failed\n");
+				return IXGBE_ERR_EEPROM;
+			}
+			checksum += word;
+		}
+	}
+
+	checksum = (u16)IXGBE_EEPROM_SUM - checksum;
+
+	return (s32)checksum;
+}
+
+/**
+ *  ixgbe_validate_eeprom_checksum_generic - Validate EEPROM checksum
+ *  @hw: pointer to hardware structure
+ *  @checksum_val: calculated checksum
+ *
+ *  Performs checksum calculation and validates the EEPROM checksum.  If the
+ *  caller does not need checksum_val, the value can be NULL.
+ **/
+s32 ixgbe_validate_eeprom_checksum_generic(struct ixgbe_hw *hw,
+					   u16 *checksum_val)
+{
+	s32 status;
+	u16 checksum;
+	u16 read_checksum = 0;
+
+	DEBUGFUNC("ixgbe_validate_eeprom_checksum_generic");
+
+	/* Read the first word from the EEPROM. If this times out or fails, do
+	 * not continue or we could be in for a very long wait while every
+	 * EEPROM read fails
+	 */
+	status = hw->eeprom.ops.read(hw, 0, &checksum);
+	if (status) {
+		DEBUGOUT("EEPROM read failed\n");
+		return status;
+	}
+
+	status = hw->eeprom.ops.calc_checksum(hw);
+	if (status < 0)
+		return status;
+
+	checksum = (u16)(status & 0xffff);
+
+	status = hw->eeprom.ops.read(hw, IXGBE_EEPROM_CHECKSUM, &read_checksum);
+	if (status) {
+		DEBUGOUT("EEPROM read failed\n");
+		return status;
+	}
+
+	/* Verify read checksum from EEPROM is the same as
+	 * calculated checksum
+	 */
+	if (read_checksum != checksum)
+		status = IXGBE_ERR_EEPROM_CHECKSUM;
+
+	/* If the user cares, return the calculated checksum */
+	if (checksum_val)
+		*checksum_val = checksum;
+
+	return status;
+}
+
+/**
+ *  ixgbe_update_eeprom_checksum_generic - Updates the EEPROM checksum
+ *  @hw: pointer to hardware structure
+ **/
+s32 ixgbe_update_eeprom_checksum_generic(struct ixgbe_hw *hw)
+{
+	s32 status;
+	u16 checksum;
+
+	DEBUGFUNC("ixgbe_update_eeprom_checksum_generic");
+
+	/* Read the first word from the EEPROM. If this times out or fails, do
+	 * not continue or we could be in for a very long wait while every
+	 * EEPROM read fails
+	 */
+	status = hw->eeprom.ops.read(hw, 0, &checksum);
+	if (status) {
+		DEBUGOUT("EEPROM read failed\n");
+		return status;
+	}
+
+	status = hw->eeprom.ops.calc_checksum(hw);
+	if (status < 0)
+		return status;
+
+	checksum = (u16)(status & 0xffff);
+
+	status = hw->eeprom.ops.write(hw, IXGBE_EEPROM_CHECKSUM, checksum);
+
+	return status;
+}
+
+/**
+ *  ixgbe_validate_mac_addr - Validate MAC address
+ *  @mac_addr: pointer to MAC address.
+ *
+ *  Tests a MAC address to ensure it is a valid Individual Address.
+ **/
+s32 ixgbe_validate_mac_addr(u8 *mac_addr)
+{
+	s32 status = IXGBE_SUCCESS;
+
+	DEBUGFUNC("ixgbe_validate_mac_addr");
+
+	/* Make sure it is not a multicast address */
+	if (IXGBE_IS_MULTICAST(mac_addr)) {
+		status = IXGBE_ERR_INVALID_MAC_ADDR;
+	/* Not a broadcast address */
+	} else if (IXGBE_IS_BROADCAST(mac_addr)) {
+		status = IXGBE_ERR_INVALID_MAC_ADDR;
+	/* Reject the zero address */
+	} else if (mac_addr[0] == 0 && mac_addr[1] == 0 && mac_addr[2] == 0 &&
+		   mac_addr[3] == 0 && mac_addr[4] == 0 && mac_addr[5] == 0) {
+		status = IXGBE_ERR_INVALID_MAC_ADDR;
+	}
+	return status;
+}
+
+/**
+ *  ixgbe_set_rar_generic - Set Rx address register
+ *  @hw: pointer to hardware structure
+ *  @index: Receive address register to write
+ *  @addr: Address to put into receive address register
+ *  @vmdq: VMDq "set" or "pool" index
+ *  @enable_addr: set flag that address is active
+ *
+ *  Puts an ethernet address into a receive address register.
+ **/
+s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
+			  u32 enable_addr)
+{
+	u32 rar_low, rar_high;
+	u32 rar_entries = hw->mac.num_rar_entries;
+
+	DEBUGFUNC("ixgbe_set_rar_generic");
+
+	/* Make sure we are using a valid rar index range */
+	if (index >= rar_entries) {
+		ERROR_REPORT2(IXGBE_ERROR_ARGUMENT,
+			     "RAR index %d is out of range.\n", index);
+		return IXGBE_ERR_INVALID_ARGUMENT;
+	}
+
+	/* setup VMDq pool selection before this RAR gets enabled */
+	hw->mac.ops.set_vmdq(hw, index, vmdq);
+
+	/*
+	 * HW expects these in little endian so we reverse the byte
+	 * order from network order (big endian) to little endian
+	 */
+	rar_low = ((u32)addr[0] |
+		   ((u32)addr[1] << 8) |
+		   ((u32)addr[2] << 16) |
+		   ((u32)addr[3] << 24));
+	/*
+	 * Some parts put the VMDq setting in the extra RAH bits,
+	 * so save everything except the lower 16 bits that hold part
+	 * of the address and the address valid bit.
+	 */
+	rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index));
+	rar_high &= ~(0x0000FFFF | IXGBE_RAH_AV);
+	rar_high |= ((u32)addr[4] | ((u32)addr[5] << 8));
+
+	if (enable_addr != 0)
+		rar_high |= IXGBE_RAH_AV;
+
+	IXGBE_WRITE_REG(hw, IXGBE_RAL(index), rar_low);
+	IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_clear_rar_generic - Remove Rx address register
+ *  @hw: pointer to hardware structure
+ *  @index: Receive address register to write
+ *
+ *  Clears an ethernet address from a receive address register.
+ **/
+s32 ixgbe_clear_rar_generic(struct ixgbe_hw *hw, u32 index)
+{
+	u32 rar_high;
+	u32 rar_entries = hw->mac.num_rar_entries;
+
+	DEBUGFUNC("ixgbe_clear_rar_generic");
+
+	/* Make sure we are using a valid rar index range */
+	if (index >= rar_entries) {
+		ERROR_REPORT2(IXGBE_ERROR_ARGUMENT,
+			     "RAR index %d is out of range.\n", index);
+		return IXGBE_ERR_INVALID_ARGUMENT;
+	}
+
+	/*
+	 * Some parts put the VMDq setting in the extra RAH bits,
+	 * so save everything except the lower 16 bits that hold part
+	 * of the address and the address valid bit.
+	 */
+	rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index));
+	rar_high &= ~(0x0000FFFF | IXGBE_RAH_AV);
+
+	IXGBE_WRITE_REG(hw, IXGBE_RAL(index), 0);
+	IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high);
+
+	/* clear VMDq pool/queue selection for this RAR */
+	hw->mac.ops.clear_vmdq(hw, index, IXGBE_CLEAR_VMDQ_ALL);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_init_rx_addrs_generic - Initializes receive address filters.
+ *  @hw: pointer to hardware structure
+ *
+ *  Places the MAC address in receive address register 0 and clears the rest
+ *  of the receive address registers. Clears the multicast table. Assumes
+ *  the receiver is in reset when the routine is called.
+ **/
+s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw)
+{
+	u32 i;
+	u32 rar_entries = hw->mac.num_rar_entries;
+
+	DEBUGFUNC("ixgbe_init_rx_addrs_generic");
+
+	/*
+	 * If the current mac address is valid, assume it is a software override
+	 * to the permanent address.
+	 * Otherwise, use the permanent address from the eeprom.
+	 */
+	if (ixgbe_validate_mac_addr(hw->mac.addr) ==
+	    IXGBE_ERR_INVALID_MAC_ADDR) {
+		/* Get the MAC address from the RAR0 for later reference */
+		hw->mac.ops.get_mac_addr(hw, hw->mac.addr);
+
+		DEBUGOUT3(" Keeping Current RAR0 Addr =%.2X %.2X %.2X ",
+			  hw->mac.addr[0], hw->mac.addr[1],
+			  hw->mac.addr[2]);
+		DEBUGOUT3("%.2X %.2X %.2X\n", hw->mac.addr[3],
+			  hw->mac.addr[4], hw->mac.addr[5]);
+	} else {
+		/* Setup the receive address. */
+		DEBUGOUT("Overriding MAC Address in RAR[0]\n");
+		DEBUGOUT3(" New MAC Addr =%.2X %.2X %.2X ",
+			  hw->mac.addr[0], hw->mac.addr[1],
+			  hw->mac.addr[2]);
+		DEBUGOUT3("%.2X %.2X %.2X\n", hw->mac.addr[3],
+			  hw->mac.addr[4], hw->mac.addr[5]);
+
+		hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0, IXGBE_RAH_AV);
+
+		/* clear VMDq pool/queue selection for RAR 0 */
+		hw->mac.ops.clear_vmdq(hw, 0, IXGBE_CLEAR_VMDQ_ALL);
+	}
+	hw->addr_ctrl.overflow_promisc = 0;
+
+	hw->addr_ctrl.rar_used_count = 1;
+
+	/* Zero out the other receive addresses. */
+	DEBUGOUT1("Clearing RAR[1-%d]\n", rar_entries - 1);
+	for (i = 1; i < rar_entries; i++) {
+		IXGBE_WRITE_REG(hw, IXGBE_RAL(i), 0);
+		IXGBE_WRITE_REG(hw, IXGBE_RAH(i), 0);
+	}
+
+	/* Clear the MTA */
+	hw->addr_ctrl.mta_in_use = 0;
+	IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, hw->mac.mc_filter_type);
+
+	DEBUGOUT(" Clearing MTA\n");
+	for (i = 0; i < hw->mac.mcft_size; i++)
+		IXGBE_WRITE_REG(hw, IXGBE_MTA(i), 0);
+
+	ixgbe_init_uta_tables(hw);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_add_uc_addr - Adds a secondary unicast address.
+ *  @hw: pointer to hardware structure
+ *  @addr: new address
+ *
+ *  Adds it to unused receive address register or goes into promiscuous mode.
+ **/
+void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq)
+{
+	u32 rar_entries = hw->mac.num_rar_entries;
+	u32 rar;
+
+	DEBUGFUNC("ixgbe_add_uc_addr");
+
+	DEBUGOUT6(" UC Addr = %.2X %.2X %.2X %.2X %.2X %.2X\n",
+		  addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]);
+
+	/*
+	 * Place this address in the RAR if there is room,
+	 * else put the controller into promiscuous mode
+	 */
+	if (hw->addr_ctrl.rar_used_count < rar_entries) {
+		rar = hw->addr_ctrl.rar_used_count;
+		hw->mac.ops.set_rar(hw, rar, addr, vmdq, IXGBE_RAH_AV);
+		DEBUGOUT1("Added a secondary address to RAR[%d]\n", rar);
+		hw->addr_ctrl.rar_used_count++;
+	} else {
+		hw->addr_ctrl.overflow_promisc++;
+	}
+
+	DEBUGOUT("ixgbe_add_uc_addr Complete\n");
+}
+
+/**
+ *  ixgbe_update_uc_addr_list_generic - Updates MAC list of secondary addresses
+ *  @hw: pointer to hardware structure
+ *  @addr_list: the list of new addresses
+ *  @addr_count: number of addresses
+ *  @next: iterator function to walk the address list
+ *
+ *  The given list replaces any existing list.  Clears the secondary addrs from
+ *  receive address registers.  Uses unused receive address registers for the
+ *  first secondary addresses, and falls back to promiscuous mode as needed.
+ *
+ *  Drivers using secondary unicast addresses must set user_set_promisc when
+ *  manually putting the device into promiscuous mode.
+ **/
+s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw, u8 *addr_list,
+				      u32 addr_count, ixgbe_mc_addr_itr next)
+{
+	u8 *addr;
+	u32 i;
+	u32 old_promisc_setting = hw->addr_ctrl.overflow_promisc;
+	u32 uc_addr_in_use;
+	u32 fctrl;
+	u32 vmdq;
+
+	DEBUGFUNC("ixgbe_update_uc_addr_list_generic");
+
+	/*
+	 * Clear accounting of old secondary address list,
+	 * don't count RAR[0]
+	 */
+	uc_addr_in_use = hw->addr_ctrl.rar_used_count - 1;
+	hw->addr_ctrl.rar_used_count -= uc_addr_in_use;
+	hw->addr_ctrl.overflow_promisc = 0;
+
+	/* Zero out the other receive addresses */
+	DEBUGOUT1("Clearing RAR[1-%d]\n", uc_addr_in_use+1);
+	for (i = 0; i < uc_addr_in_use; i++) {
+		IXGBE_WRITE_REG(hw, IXGBE_RAL(1+i), 0);
+		IXGBE_WRITE_REG(hw, IXGBE_RAH(1+i), 0);
+	}
+
+	/* Add the new addresses */
+	for (i = 0; i < addr_count; i++) {
+		DEBUGOUT(" Adding the secondary addresses:\n");
+		addr = next(hw, &addr_list, &vmdq);
+		ixgbe_add_uc_addr(hw, addr, vmdq);
+	}
+
+	if (hw->addr_ctrl.overflow_promisc) {
+		/* enable promisc if not already in overflow or set by user */
+		if (!old_promisc_setting && !hw->addr_ctrl.user_set_promisc) {
+			DEBUGOUT(" Entering address overflow promisc mode\n");
+			fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
+			fctrl |= IXGBE_FCTRL_UPE;
+			IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl);
+		}
+	} else {
+		/* only disable if set by overflow, not by user */
+		if (old_promisc_setting && !hw->addr_ctrl.user_set_promisc) {
+			DEBUGOUT(" Leaving address overflow promisc mode\n");
+			fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
+			fctrl &= ~IXGBE_FCTRL_UPE;
+			IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl);
+		}
+	}
+
+	DEBUGOUT("ixgbe_update_uc_addr_list_generic Complete\n");
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_mta_vector - Determines bit-vector in multicast table to set
+ *  @hw: pointer to hardware structure
+ *  @mc_addr: the multicast address
+ *
+ *  Extracts the 12 bits, from a multicast address, to determine which
+ *  bit-vector to set in the multicast table. The hardware uses 12 bits, from
+ *  incoming rx multicast addresses, to determine the bit-vector to check in
+ *  the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set
+ *  by the MO field of the MCSTCTRL. The MO field is set during initialization
+ *  to mc_filter_type.
+ **/
+STATIC s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr)
+{
+	u32 vector = 0;
+
+	DEBUGFUNC("ixgbe_mta_vector");
+
+	switch (hw->mac.mc_filter_type) {
+	case 0:   /* use bits [47:36] of the address */
+		vector = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4));
+		break;
+	case 1:   /* use bits [46:35] of the address */
+		vector = ((mc_addr[4] >> 3) | (((u16)mc_addr[5]) << 5));
+		break;
+	case 2:   /* use bits [45:34] of the address */
+		vector = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6));
+		break;
+	case 3:   /* use bits [43:32] of the address */
+		vector = ((mc_addr[4]) | (((u16)mc_addr[5]) << 8));
+		break;
+	default:  /* Invalid mc_filter_type */
+		DEBUGOUT("MC filter type param set incorrectly\n");
+		ASSERT(0);
+		break;
+	}
+
+	/* vector can only be 12-bits or boundary will be exceeded */
+	vector &= 0xFFF;
+	return vector;
+}
+
+/**
+ *  ixgbe_set_mta - Set bit-vector in multicast table
+ *  @hw: pointer to hardware structure
+ *  @hash_value: Multicast address hash value
+ *
+ *  Sets the bit-vector in the multicast table.
+ **/
+void ixgbe_set_mta(struct ixgbe_hw *hw, u8 *mc_addr)
+{
+	u32 vector;
+	u32 vector_bit;
+	u32 vector_reg;
+
+	DEBUGFUNC("ixgbe_set_mta");
+
+	hw->addr_ctrl.mta_in_use++;
+
+	vector = ixgbe_mta_vector(hw, mc_addr);
+	DEBUGOUT1(" bit-vector = 0x%03X\n", vector);
+
+	/*
+	 * The MTA is a register array of 128 32-bit registers. It is treated
+	 * like an array of 4096 bits.  We want to set bit
+	 * BitArray[vector_value]. So we figure out what register the bit is
+	 * in, read it, OR in the new bit, then write back the new value.  The
+	 * register is determined by the upper 7 bits of the vector value and
+	 * the bit within that register are determined by the lower 5 bits of
+	 * the value.
+	 */
+	vector_reg = (vector >> 5) & 0x7F;
+	vector_bit = vector & 0x1F;
+	hw->mac.mta_shadow[vector_reg] |= (1 << vector_bit);
+}
+
+/**
+ *  ixgbe_update_mc_addr_list_generic - Updates MAC list of multicast addresses
+ *  @hw: pointer to hardware structure
+ *  @mc_addr_list: the list of new multicast addresses
+ *  @mc_addr_count: number of addresses
+ *  @next: iterator function to walk the multicast address list
+ *  @clear: flag, when set clears the table beforehand
+ *
+ *  When the clear flag is set, the given list replaces any existing list.
+ *  Hashes the given addresses into the multicast table.
+ **/
+s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw, u8 *mc_addr_list,
+				      u32 mc_addr_count, ixgbe_mc_addr_itr next,
+				      bool clear)
+{
+	u32 i;
+	u32 vmdq;
+
+	DEBUGFUNC("ixgbe_update_mc_addr_list_generic");
+
+	/*
+	 * Set the new number of MC addresses that we are being requested to
+	 * use.
+	 */
+	hw->addr_ctrl.num_mc_addrs = mc_addr_count;
+	hw->addr_ctrl.mta_in_use = 0;
+
+	/* Clear mta_shadow */
+	if (clear) {
+		DEBUGOUT(" Clearing MTA\n");
+		memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow));
+	}
+
+	/* Update mta_shadow */
+	for (i = 0; i < mc_addr_count; i++) {
+		DEBUGOUT(" Adding the multicast addresses:\n");
+		ixgbe_set_mta(hw, next(hw, &mc_addr_list, &vmdq));
+	}
+
+	/* Enable mta */
+	for (i = 0; i < hw->mac.mcft_size; i++)
+		IXGBE_WRITE_REG_ARRAY(hw, IXGBE_MTA(0), i,
+				      hw->mac.mta_shadow[i]);
+
+	if (hw->addr_ctrl.mta_in_use > 0)
+		IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL,
+				IXGBE_MCSTCTRL_MFE | hw->mac.mc_filter_type);
+
+	DEBUGOUT("ixgbe_update_mc_addr_list_generic Complete\n");
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_enable_mc_generic - Enable multicast address in RAR
+ *  @hw: pointer to hardware structure
+ *
+ *  Enables multicast address in RAR and the use of the multicast hash table.
+ **/
+s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw)
+{
+	struct ixgbe_addr_filter_info *a = &hw->addr_ctrl;
+
+	DEBUGFUNC("ixgbe_enable_mc_generic");
+
+	if (a->mta_in_use > 0)
+		IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, IXGBE_MCSTCTRL_MFE |
+				hw->mac.mc_filter_type);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_disable_mc_generic - Disable multicast address in RAR
+ *  @hw: pointer to hardware structure
+ *
+ *  Disables multicast address in RAR and the use of the multicast hash table.
+ **/
+s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw)
+{
+	struct ixgbe_addr_filter_info *a = &hw->addr_ctrl;
+
+	DEBUGFUNC("ixgbe_disable_mc_generic");
+
+	if (a->mta_in_use > 0)
+		IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, hw->mac.mc_filter_type);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_fc_enable_generic - Enable flow control
+ *  @hw: pointer to hardware structure
+ *
+ *  Enable flow control according to the current settings.
+ **/
+s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw)
+{
+	s32 ret_val = IXGBE_SUCCESS;
+	u32 mflcn_reg, fccfg_reg;
+	u32 reg;
+	u32 fcrtl, fcrth;
+	int i;
+
+	DEBUGFUNC("ixgbe_fc_enable_generic");
+
+	/* Validate the water mark configuration */
+	if (!hw->fc.pause_time) {
+		ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
+		goto out;
+	}
+
+	/* Low water mark of zero causes XOFF floods */
+	for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) {
+		if ((hw->fc.current_mode & ixgbe_fc_tx_pause) &&
+		    hw->fc.high_water[i]) {
+			if (!hw->fc.low_water[i] ||
+			    hw->fc.low_water[i] >= hw->fc.high_water[i]) {
+				DEBUGOUT("Invalid water mark configuration\n");
+				ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
+				goto out;
+			}
+		}
+	}
+
+	/* Negotiate the fc mode to use */
+	ixgbe_fc_autoneg(hw);
+
+	/* Disable any previous flow control settings */
+	mflcn_reg = IXGBE_READ_REG(hw, IXGBE_MFLCN);
+	mflcn_reg &= ~(IXGBE_MFLCN_RPFCE_MASK | IXGBE_MFLCN_RFCE);
+
+	fccfg_reg = IXGBE_READ_REG(hw, IXGBE_FCCFG);
+	fccfg_reg &= ~(IXGBE_FCCFG_TFCE_802_3X | IXGBE_FCCFG_TFCE_PRIORITY);
+
+	/*
+	 * The possible values of fc.current_mode are:
+	 * 0: Flow control is completely disabled
+	 * 1: Rx flow control is enabled (we can receive pause frames,
+	 *    but not send pause frames).
+	 * 2: Tx flow control is enabled (we can send pause frames but
+	 *    we do not support receiving pause frames).
+	 * 3: Both Rx and Tx flow control (symmetric) are enabled.
+	 * other: Invalid.
+	 */
+	switch (hw->fc.current_mode) {
+	case ixgbe_fc_none:
+		/*
+		 * Flow control is disabled by software override or autoneg.
+		 * The code below will actually disable it in the HW.
+		 */
+		break;
+	case ixgbe_fc_rx_pause:
+		/*
+		 * Rx Flow control is enabled and Tx Flow control is
+		 * disabled by software override. Since there really
+		 * isn't a way to advertise that we are capable of RX
+		 * Pause ONLY, we will advertise that we support both
+		 * symmetric and asymmetric Rx PAUSE.  Later, we will
+		 * disable the adapter's ability to send PAUSE frames.
+		 */
+		mflcn_reg |= IXGBE_MFLCN_RFCE;
+		break;
+	case ixgbe_fc_tx_pause:
+		/*
+		 * Tx Flow control is enabled, and Rx Flow control is
+		 * disabled by software override.
+		 */
+		fccfg_reg |= IXGBE_FCCFG_TFCE_802_3X;
+		break;
+	case ixgbe_fc_full:
+		/* Flow control (both Rx and Tx) is enabled by SW override. */
+		mflcn_reg |= IXGBE_MFLCN_RFCE;
+		fccfg_reg |= IXGBE_FCCFG_TFCE_802_3X;
+		break;
+	default:
+		ERROR_REPORT1(IXGBE_ERROR_ARGUMENT,
+			     "Flow control param set incorrectly\n");
+		ret_val = IXGBE_ERR_CONFIG;
+		goto out;
+		break;
+	}
+
+	/* Set 802.3x based flow control settings. */
+	mflcn_reg |= IXGBE_MFLCN_DPF;
+	IXGBE_WRITE_REG(hw, IXGBE_MFLCN, mflcn_reg);
+	IXGBE_WRITE_REG(hw, IXGBE_FCCFG, fccfg_reg);
+
+
+	/* Set up and enable Rx high/low water mark thresholds, enable XON. */
+	for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) {
+		if ((hw->fc.current_mode & ixgbe_fc_tx_pause) &&
+		    hw->fc.high_water[i]) {
+			fcrtl = (hw->fc.low_water[i] << 10) | IXGBE_FCRTL_XONE;
+			IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), fcrtl);
+			fcrth = (hw->fc.high_water[i] << 10) | IXGBE_FCRTH_FCEN;
+		} else {
+			IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), 0);
+			/*
+			 * In order to prevent Tx hangs when the internal Tx
+			 * switch is enabled we must set the high water mark
+			 * to the Rx packet buffer size - 24KB.  This allows
+			 * the Tx switch to function even under heavy Rx
+			 * workloads.
+			 */
+			fcrth = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i)) - 24576;
+		}
+
+		IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(i), fcrth);
+	}
+
+	/* Configure pause time (2 TCs per register) */
+	reg = hw->fc.pause_time * 0x00010001;
+	for (i = 0; i < (IXGBE_DCB_MAX_TRAFFIC_CLASS / 2); i++)
+		IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), reg);
+
+	/* Configure flow control refresh threshold value */
+	IXGBE_WRITE_REG(hw, IXGBE_FCRTV, hw->fc.pause_time / 2);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  ixgbe_negotiate_fc - Negotiate flow control
+ *  @hw: pointer to hardware structure
+ *  @adv_reg: flow control advertised settings
+ *  @lp_reg: link partner's flow control settings
+ *  @adv_sym: symmetric pause bit in advertisement
+ *  @adv_asm: asymmetric pause bit in advertisement
+ *  @lp_sym: symmetric pause bit in link partner advertisement
+ *  @lp_asm: asymmetric pause bit in link partner advertisement
+ *
+ *  Find the intersection between advertised settings and link partner's
+ *  advertised settings
+ **/
+STATIC s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg,
+			      u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm)
+{
+	if ((!(adv_reg)) ||  (!(lp_reg))) {
+		ERROR_REPORT3(IXGBE_ERROR_UNSUPPORTED,
+			     "Local or link partner's advertised flow control "
+			     "settings are NULL. Local: %x, link partner: %x\n",
+			     adv_reg, lp_reg);
+		return IXGBE_ERR_FC_NOT_NEGOTIATED;
+	}
+
+	if ((adv_reg & adv_sym) && (lp_reg & lp_sym)) {
+		/*
+		 * Now we need to check if the user selected Rx ONLY
+		 * of pause frames.  In this case, we had to advertise
+		 * FULL flow control because we could not advertise RX
+		 * ONLY. Hence, we must now check to see if we need to
+		 * turn OFF the TRANSMISSION of PAUSE frames.
+		 */
+		if (hw->fc.requested_mode == ixgbe_fc_full) {
+			hw->fc.current_mode = ixgbe_fc_full;
+			DEBUGOUT("Flow Control = FULL.\n");
+		} else {
+			hw->fc.current_mode = ixgbe_fc_rx_pause;
+			DEBUGOUT("Flow Control=RX PAUSE frames only\n");
+		}
+	} else if (!(adv_reg & adv_sym) && (adv_reg & adv_asm) &&
+		   (lp_reg & lp_sym) && (lp_reg & lp_asm)) {
+		hw->fc.current_mode = ixgbe_fc_tx_pause;
+		DEBUGOUT("Flow Control = TX PAUSE frames only.\n");
+	} else if ((adv_reg & adv_sym) && (adv_reg & adv_asm) &&
+		   !(lp_reg & lp_sym) && (lp_reg & lp_asm)) {
+		hw->fc.current_mode = ixgbe_fc_rx_pause;
+		DEBUGOUT("Flow Control = RX PAUSE frames only.\n");
+	} else {
+		hw->fc.current_mode = ixgbe_fc_none;
+		DEBUGOUT("Flow Control = NONE.\n");
+	}
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_fc_autoneg_fiber - Enable flow control on 1 gig fiber
+ *  @hw: pointer to hardware structure
+ *
+ *  Enable flow control according on 1 gig fiber.
+ **/
+STATIC s32 ixgbe_fc_autoneg_fiber(struct ixgbe_hw *hw)
+{
+	u32 pcs_anadv_reg, pcs_lpab_reg, linkstat;
+	s32 ret_val = IXGBE_ERR_FC_NOT_NEGOTIATED;
+
+	/*
+	 * On multispeed fiber at 1g, bail out if
+	 * - link is up but AN did not complete, or if
+	 * - link is up and AN completed but timed out
+	 */
+
+	linkstat = IXGBE_READ_REG(hw, IXGBE_PCS1GLSTA);
+	if ((!!(linkstat & IXGBE_PCS1GLSTA_AN_COMPLETE) == 0) ||
+	    (!!(linkstat & IXGBE_PCS1GLSTA_AN_TIMED_OUT) == 1)) {
+		DEBUGOUT("Auto-Negotiation did not complete or timed out\n");
+		goto out;
+	}
+
+	pcs_anadv_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA);
+	pcs_lpab_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANLP);
+
+	ret_val =  ixgbe_negotiate_fc(hw, pcs_anadv_reg,
+				      pcs_lpab_reg, IXGBE_PCS1GANA_SYM_PAUSE,
+				      IXGBE_PCS1GANA_ASM_PAUSE,
+				      IXGBE_PCS1GANA_SYM_PAUSE,
+				      IXGBE_PCS1GANA_ASM_PAUSE);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  ixgbe_fc_autoneg_backplane - Enable flow control IEEE clause 37
+ *  @hw: pointer to hardware structure
+ *
+ *  Enable flow control according to IEEE clause 37.
+ **/
+STATIC s32 ixgbe_fc_autoneg_backplane(struct ixgbe_hw *hw)
+{
+	u32 links2, anlp1_reg, autoc_reg, links;
+	s32 ret_val = IXGBE_ERR_FC_NOT_NEGOTIATED;
+
+	/*
+	 * On backplane, bail out if
+	 * - backplane autoneg was not completed, or if
+	 * - we are 82599 and link partner is not AN enabled
+	 */
+	links = IXGBE_READ_REG(hw, IXGBE_LINKS);
+	if ((links & IXGBE_LINKS_KX_AN_COMP) == 0) {
+		DEBUGOUT("Auto-Negotiation did not complete\n");
+		goto out;
+	}
+
+	if (hw->mac.type == ixgbe_mac_82599EB) {
+		links2 = IXGBE_READ_REG(hw, IXGBE_LINKS2);
+		if ((links2 & IXGBE_LINKS2_AN_SUPPORTED) == 0) {
+			DEBUGOUT("Link partner is not AN enabled\n");
+			goto out;
+		}
+	}
+	/*
+	 * Read the 10g AN autoc and LP ability registers and resolve
+	 * local flow control settings accordingly
+	 */
+	autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	anlp1_reg = IXGBE_READ_REG(hw, IXGBE_ANLP1);
+
+	ret_val = ixgbe_negotiate_fc(hw, autoc_reg,
+		anlp1_reg, IXGBE_AUTOC_SYM_PAUSE, IXGBE_AUTOC_ASM_PAUSE,
+		IXGBE_ANLP1_SYM_PAUSE, IXGBE_ANLP1_ASM_PAUSE);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  ixgbe_fc_autoneg_copper - Enable flow control IEEE clause 37
+ *  @hw: pointer to hardware structure
+ *
+ *  Enable flow control according to IEEE clause 37.
+ **/
+STATIC s32 ixgbe_fc_autoneg_copper(struct ixgbe_hw *hw)
+{
+	u16 technology_ability_reg = 0;
+	u16 lp_technology_ability_reg = 0;
+
+	hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_ADVT,
+			     IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+			     &technology_ability_reg);
+	hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_LP,
+			     IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+			     &lp_technology_ability_reg);
+
+	return ixgbe_negotiate_fc(hw, (u32)technology_ability_reg,
+				  (u32)lp_technology_ability_reg,
+				  IXGBE_TAF_SYM_PAUSE, IXGBE_TAF_ASM_PAUSE,
+				  IXGBE_TAF_SYM_PAUSE, IXGBE_TAF_ASM_PAUSE);
+}
+
+/**
+ *  ixgbe_fc_autoneg - Configure flow control
+ *  @hw: pointer to hardware structure
+ *
+ *  Compares our advertised flow control capabilities to those advertised by
+ *  our link partner, and determines the proper flow control mode to use.
+ **/
+void ixgbe_fc_autoneg(struct ixgbe_hw *hw)
+{
+	s32 ret_val = IXGBE_ERR_FC_NOT_NEGOTIATED;
+	ixgbe_link_speed speed;
+	bool link_up;
+
+	DEBUGFUNC("ixgbe_fc_autoneg");
+
+	/*
+	 * AN should have completed when the cable was plugged in.
+	 * Look for reasons to bail out.  Bail out if:
+	 * - FC autoneg is disabled, or if
+	 * - link is not up.
+	 */
+	if (hw->fc.disable_fc_autoneg) {
+		ERROR_REPORT1(IXGBE_ERROR_UNSUPPORTED,
+			     "Flow control autoneg is disabled");
+		goto out;
+	}
+
+	hw->mac.ops.check_link(hw, &speed, &link_up, false);
+	if (!link_up) {
+		ERROR_REPORT1(IXGBE_ERROR_SOFTWARE, "The link is down");
+		goto out;
+	}
+
+	switch (hw->phy.media_type) {
+	/* Autoneg flow control on fiber adapters */
+	case ixgbe_media_type_fiber_qsfp:
+	case ixgbe_media_type_fiber:
+		if (speed == IXGBE_LINK_SPEED_1GB_FULL)
+			ret_val = ixgbe_fc_autoneg_fiber(hw);
+		break;
+
+	/* Autoneg flow control on backplane adapters */
+	case ixgbe_media_type_backplane:
+		ret_val = ixgbe_fc_autoneg_backplane(hw);
+		break;
+
+	/* Autoneg flow control on copper adapters */
+	case ixgbe_media_type_copper:
+		if (ixgbe_device_supports_autoneg_fc(hw))
+			ret_val = ixgbe_fc_autoneg_copper(hw);
+		break;
+
+	default:
+		break;
+	}
+
+out:
+	if (ret_val == IXGBE_SUCCESS) {
+		hw->fc.fc_was_autonegged = true;
+	} else {
+		hw->fc.fc_was_autonegged = false;
+		hw->fc.current_mode = hw->fc.requested_mode;
+	}
+}
+
+/*
+ * ixgbe_pcie_timeout_poll - Return number of times to poll for completion
+ * @hw: pointer to hardware structure
+ *
+ * System-wide timeout range is encoded in PCIe Device Control2 register.
+ *
+ * Add 10% to specified maximum and return the number of times to poll for
+ * completion timeout, in units of 100 microsec.  Never return less than
+ * 800 = 80 millisec.
+ */
+STATIC u32 ixgbe_pcie_timeout_poll(struct ixgbe_hw *hw)
+{
+	s16 devctl2;
+	u32 pollcnt;
+
+	devctl2 = IXGBE_READ_PCIE_WORD(hw, IXGBE_PCI_DEVICE_CONTROL2);
+	devctl2 &= IXGBE_PCIDEVCTRL2_TIMEO_MASK;
+
+	switch (devctl2) {
+	case IXGBE_PCIDEVCTRL2_65_130ms:
+		pollcnt = 1300;		/* 130 millisec */
+		break;
+	case IXGBE_PCIDEVCTRL2_260_520ms:
+		pollcnt = 5200;		/* 520 millisec */
+		break;
+	case IXGBE_PCIDEVCTRL2_1_2s:
+		pollcnt = 20000;	/* 2 sec */
+		break;
+	case IXGBE_PCIDEVCTRL2_4_8s:
+		pollcnt = 80000;	/* 8 sec */
+		break;
+	case IXGBE_PCIDEVCTRL2_17_34s:
+		pollcnt = 34000;	/* 34 sec */
+		break;
+	case IXGBE_PCIDEVCTRL2_50_100us:	/* 100 microsecs */
+	case IXGBE_PCIDEVCTRL2_1_2ms:		/* 2 millisecs */
+	case IXGBE_PCIDEVCTRL2_16_32ms:		/* 32 millisec */
+	case IXGBE_PCIDEVCTRL2_16_32ms_def:	/* 32 millisec default */
+	default:
+		pollcnt = 800;		/* 80 millisec minimum */
+		break;
+	}
+
+	/* add 10% to spec maximum */
+	return (pollcnt * 11) / 10;
+}
+
+/**
+ *  ixgbe_disable_pcie_master - Disable PCI-express master access
+ *  @hw: pointer to hardware structure
+ *
+ *  Disables PCI-Express master access and verifies there are no pending
+ *  requests. IXGBE_ERR_MASTER_REQUESTS_PENDING is returned if master disable
+ *  bit hasn't caused the master requests to be disabled, else IXGBE_SUCCESS
+ *  is returned signifying master requests disabled.
+ **/
+s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw)
+{
+	s32 status = IXGBE_SUCCESS;
+	u32 i, poll;
+	u16 value;
+
+	DEBUGFUNC("ixgbe_disable_pcie_master");
+
+	/* Always set this bit to ensure any future transactions are blocked */
+	IXGBE_WRITE_REG(hw, IXGBE_CTRL, IXGBE_CTRL_GIO_DIS);
+
+	/* Exit if master requests are blocked */
+	if (!(IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_GIO) ||
+	    IXGBE_REMOVED(hw->hw_addr))
+		goto out;
+
+	/* Poll for master request bit to clear */
+	for (i = 0; i < IXGBE_PCI_MASTER_DISABLE_TIMEOUT; i++) {
+		usec_delay(100);
+		if (!(IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_GIO))
+			goto out;
+	}
+
+	/*
+	 * Two consecutive resets are required via CTRL.RST per datasheet
+	 * 5.2.5.3.2 Master Disable.  We set a flag to inform the reset routine
+	 * of this need.  The first reset prevents new master requests from
+	 * being issued by our device.  We then must wait 1usec or more for any
+	 * remaining completions from the PCIe bus to trickle in, and then reset
+	 * again to clear out any effects they may have had on our device.
+	 */
+	DEBUGOUT("GIO Master Disable bit didn't clear - requesting resets\n");
+	hw->mac.flags |= IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
+
+	if (hw->mac.type >= ixgbe_mac_X550)
+		goto out;
+
+	/*
+	 * Before proceeding, make sure that the PCIe block does not have
+	 * transactions pending.
+	 */
+	poll = ixgbe_pcie_timeout_poll(hw);
+	for (i = 0; i < poll; i++) {
+		usec_delay(100);
+		value = IXGBE_READ_PCIE_WORD(hw, IXGBE_PCI_DEVICE_STATUS);
+		if (IXGBE_REMOVED(hw->hw_addr))
+			goto out;
+		if (!(value & IXGBE_PCI_DEVICE_STATUS_TRANSACTION_PENDING))
+			goto out;
+	}
+
+	ERROR_REPORT1(IXGBE_ERROR_POLLING,
+		     "PCIe transaction pending bit also did not clear.\n");
+	status = IXGBE_ERR_MASTER_REQUESTS_PENDING;
+
+out:
+	return status;
+}
+
+/**
+ *  ixgbe_acquire_swfw_sync - Acquire SWFW semaphore
+ *  @hw: pointer to hardware structure
+ *  @mask: Mask to specify which semaphore to acquire
+ *
+ *  Acquires the SWFW semaphore through the GSSR register for the specified
+ *  function (CSR, PHY0, PHY1, EEPROM, Flash)
+ **/
+s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u32 mask)
+{
+	u32 gssr = 0;
+	u32 swmask = mask;
+	u32 fwmask = mask << 5;
+	u32 timeout = 200;
+	u32 i;
+
+	DEBUGFUNC("ixgbe_acquire_swfw_sync");
+
+	for (i = 0; i < timeout; i++) {
+		/*
+		 * SW NVM semaphore bit is used for access to all
+		 * SW_FW_SYNC bits (not just NVM)
+		 */
+		if (ixgbe_get_eeprom_semaphore(hw))
+			return IXGBE_ERR_SWFW_SYNC;
+
+		gssr = IXGBE_READ_REG(hw, IXGBE_GSSR);
+		if (!(gssr & (fwmask | swmask))) {
+			gssr |= swmask;
+			IXGBE_WRITE_REG(hw, IXGBE_GSSR, gssr);
+			ixgbe_release_eeprom_semaphore(hw);
+			return IXGBE_SUCCESS;
+		} else {
+			/* Resource is currently in use by FW or SW */
+			ixgbe_release_eeprom_semaphore(hw);
+			msec_delay(5);
+		}
+	}
+
+	/* If time expired clear the bits holding the lock and retry */
+	if (gssr & (fwmask | swmask))
+		ixgbe_release_swfw_sync(hw, gssr & (fwmask | swmask));
+
+	msec_delay(5);
+	return IXGBE_ERR_SWFW_SYNC;
+}
+
+/**
+ *  ixgbe_release_swfw_sync - Release SWFW semaphore
+ *  @hw: pointer to hardware structure
+ *  @mask: Mask to specify which semaphore to release
+ *
+ *  Releases the SWFW semaphore through the GSSR register for the specified
+ *  function (CSR, PHY0, PHY1, EEPROM, Flash)
+ **/
+void ixgbe_release_swfw_sync(struct ixgbe_hw *hw, u32 mask)
+{
+	u32 gssr;
+	u32 swmask = mask;
+
+	DEBUGFUNC("ixgbe_release_swfw_sync");
+
+	ixgbe_get_eeprom_semaphore(hw);
+
+	gssr = IXGBE_READ_REG(hw, IXGBE_GSSR);
+	gssr &= ~swmask;
+	IXGBE_WRITE_REG(hw, IXGBE_GSSR, gssr);
+
+	ixgbe_release_eeprom_semaphore(hw);
+}
+
+/**
+ *  ixgbe_disable_sec_rx_path_generic - Stops the receive data path
+ *  @hw: pointer to hardware structure
+ *
+ *  Stops the receive data path and waits for the HW to internally empty
+ *  the Rx security block
+ **/
+s32 ixgbe_disable_sec_rx_path_generic(struct ixgbe_hw *hw)
+{
+#define IXGBE_MAX_SECRX_POLL 40
+
+	int i;
+	int secrxreg;
+
+	DEBUGFUNC("ixgbe_disable_sec_rx_path_generic");
+
+
+	secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL);
+	secrxreg |= IXGBE_SECRXCTRL_RX_DIS;
+	IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, secrxreg);
+	for (i = 0; i < IXGBE_MAX_SECRX_POLL; i++) {
+		secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXSTAT);
+		if (secrxreg & IXGBE_SECRXSTAT_SECRX_RDY)
+			break;
+		else
+			/* Use interrupt-safe sleep just in case */
+			usec_delay(1000);
+	}
+
+	/* For informational purposes only */
+	if (i >= IXGBE_MAX_SECRX_POLL)
+		DEBUGOUT("Rx unit being enabled before security "
+			 "path fully disabled.  Continuing with init.\n");
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  prot_autoc_read_generic - Hides MAC differences needed for AUTOC read
+ *  @hw: pointer to hardware structure
+ *  @reg_val: Value we read from AUTOC
+ *
+ *  The default case requires no protection so just to the register read.
+ */
+s32 prot_autoc_read_generic(struct ixgbe_hw *hw, bool *locked, u32 *reg_val)
+{
+	*locked = false;
+	*reg_val = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	return IXGBE_SUCCESS;
+}
+
+/**
+ * prot_autoc_write_generic - Hides MAC differences needed for AUTOC write
+ * @hw: pointer to hardware structure
+ * @reg_val: value to write to AUTOC
+ * @locked: bool to indicate whether the SW/FW lock was already taken by
+ *           previous read.
+ *
+ * The default case requires no protection so just to the register write.
+ */
+s32 prot_autoc_write_generic(struct ixgbe_hw *hw, u32 reg_val, bool locked)
+{
+	UNREFERENCED_1PARAMETER(locked);
+
+	IXGBE_WRITE_REG(hw, IXGBE_AUTOC, reg_val);
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_enable_sec_rx_path_generic - Enables the receive data path
+ *  @hw: pointer to hardware structure
+ *
+ *  Enables the receive data path.
+ **/
+s32 ixgbe_enable_sec_rx_path_generic(struct ixgbe_hw *hw)
+{
+	int secrxreg;
+
+	DEBUGFUNC("ixgbe_enable_sec_rx_path_generic");
+
+	secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL);
+	secrxreg &= ~IXGBE_SECRXCTRL_RX_DIS;
+	IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, secrxreg);
+	IXGBE_WRITE_FLUSH(hw);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_enable_rx_dma_generic - Enable the Rx DMA unit
+ *  @hw: pointer to hardware structure
+ *  @regval: register value to write to RXCTRL
+ *
+ *  Enables the Rx DMA unit
+ **/
+s32 ixgbe_enable_rx_dma_generic(struct ixgbe_hw *hw, u32 regval)
+{
+	DEBUGFUNC("ixgbe_enable_rx_dma_generic");
+
+	if (regval & IXGBE_RXCTRL_RXEN)
+		ixgbe_enable_rx(hw);
+	else
+		ixgbe_disable_rx(hw);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_blink_led_start_generic - Blink LED based on index.
+ *  @hw: pointer to hardware structure
+ *  @index: led number to blink
+ **/
+s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index)
+{
+	ixgbe_link_speed speed = 0;
+	bool link_up = 0;
+	u32 autoc_reg = 0;
+	u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+	s32 ret_val = IXGBE_SUCCESS;
+	bool locked = false;
+
+	DEBUGFUNC("ixgbe_blink_led_start_generic");
+
+	/*
+	 * Link must be up to auto-blink the LEDs;
+	 * Force it if link is down.
+	 */
+	hw->mac.ops.check_link(hw, &speed, &link_up, false);
+
+	if (!link_up) {
+		ret_val = hw->mac.ops.prot_autoc_read(hw, &locked, &autoc_reg);
+		if (ret_val != IXGBE_SUCCESS)
+			goto out;
+
+		autoc_reg |= IXGBE_AUTOC_AN_RESTART;
+		autoc_reg |= IXGBE_AUTOC_FLU;
+
+		ret_val = hw->mac.ops.prot_autoc_write(hw, autoc_reg, locked);
+		if (ret_val != IXGBE_SUCCESS)
+			goto out;
+
+		IXGBE_WRITE_FLUSH(hw);
+		msec_delay(10);
+	}
+
+	led_reg &= ~IXGBE_LED_MODE_MASK(index);
+	led_reg |= IXGBE_LED_BLINK(index);
+	IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
+	IXGBE_WRITE_FLUSH(hw);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  ixgbe_blink_led_stop_generic - Stop blinking LED based on index.
+ *  @hw: pointer to hardware structure
+ *  @index: led number to stop blinking
+ **/
+s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index)
+{
+	u32 autoc_reg = 0;
+	u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+	s32 ret_val = IXGBE_SUCCESS;
+	bool locked = false;
+
+	DEBUGFUNC("ixgbe_blink_led_stop_generic");
+
+	ret_val = hw->mac.ops.prot_autoc_read(hw, &locked, &autoc_reg);
+	if (ret_val != IXGBE_SUCCESS)
+		goto out;
+
+	autoc_reg &= ~IXGBE_AUTOC_FLU;
+	autoc_reg |= IXGBE_AUTOC_AN_RESTART;
+
+	ret_val = hw->mac.ops.prot_autoc_write(hw, autoc_reg, locked);
+	if (ret_val != IXGBE_SUCCESS)
+		goto out;
+
+	led_reg &= ~IXGBE_LED_MODE_MASK(index);
+	led_reg &= ~IXGBE_LED_BLINK(index);
+	led_reg |= IXGBE_LED_LINK_ACTIVE << IXGBE_LED_MODE_SHIFT(index);
+	IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
+	IXGBE_WRITE_FLUSH(hw);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  ixgbe_get_san_mac_addr_offset - Get SAN MAC address offset from the EEPROM
+ *  @hw: pointer to hardware structure
+ *  @san_mac_offset: SAN MAC address offset
+ *
+ *  This function will read the EEPROM location for the SAN MAC address
+ *  pointer, and returns the value at that location.  This is used in both
+ *  get and set mac_addr routines.
+ **/
+STATIC s32 ixgbe_get_san_mac_addr_offset(struct ixgbe_hw *hw,
+					 u16 *san_mac_offset)
+{
+	s32 ret_val;
+
+	DEBUGFUNC("ixgbe_get_san_mac_addr_offset");
+
+	/*
+	 * First read the EEPROM pointer to see if the MAC addresses are
+	 * available.
+	 */
+	ret_val = hw->eeprom.ops.read(hw, IXGBE_SAN_MAC_ADDR_PTR,
+				      san_mac_offset);
+	if (ret_val) {
+		ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+			      "eeprom at offset %d failed",
+			      IXGBE_SAN_MAC_ADDR_PTR);
+	}
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_get_san_mac_addr_generic - SAN MAC address retrieval from the EEPROM
+ *  @hw: pointer to hardware structure
+ *  @san_mac_addr: SAN MAC address
+ *
+ *  Reads the SAN MAC address from the EEPROM, if it's available.  This is
+ *  per-port, so set_lan_id() must be called before reading the addresses.
+ *  set_lan_id() is called by identify_sfp(), but this cannot be relied
+ *  upon for non-SFP connections, so we must call it here.
+ **/
+s32 ixgbe_get_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr)
+{
+	u16 san_mac_data, san_mac_offset;
+	u8 i;
+	s32 ret_val;
+
+	DEBUGFUNC("ixgbe_get_san_mac_addr_generic");
+
+	/*
+	 * First read the EEPROM pointer to see if the MAC addresses are
+	 * available.  If they're not, no point in calling set_lan_id() here.
+	 */
+	ret_val = ixgbe_get_san_mac_addr_offset(hw, &san_mac_offset);
+	if (ret_val || san_mac_offset == 0 || san_mac_offset == 0xFFFF)
+		goto san_mac_addr_out;
+
+	/* make sure we know which port we need to program */
+	hw->mac.ops.set_lan_id(hw);
+	/* apply the port offset to the address offset */
+	(hw->bus.func) ? (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT1_OFFSET) :
+			 (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT0_OFFSET);
+	for (i = 0; i < 3; i++) {
+		ret_val = hw->eeprom.ops.read(hw, san_mac_offset,
+					      &san_mac_data);
+		if (ret_val) {
+			ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+				      "eeprom read at offset %d failed",
+				      san_mac_offset);
+			goto san_mac_addr_out;
+		}
+		san_mac_addr[i * 2] = (u8)(san_mac_data);
+		san_mac_addr[i * 2 + 1] = (u8)(san_mac_data >> 8);
+		san_mac_offset++;
+	}
+	return IXGBE_SUCCESS;
+
+san_mac_addr_out:
+	/*
+	 * No addresses available in this EEPROM.  It's not an
+	 * error though, so just wipe the local address and return.
+	 */
+	for (i = 0; i < 6; i++)
+		san_mac_addr[i] = 0xFF;
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_set_san_mac_addr_generic - Write the SAN MAC address to the EEPROM
+ *  @hw: pointer to hardware structure
+ *  @san_mac_addr: SAN MAC address
+ *
+ *  Write a SAN MAC address to the EEPROM.
+ **/
+s32 ixgbe_set_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr)
+{
+	s32 ret_val;
+	u16 san_mac_data, san_mac_offset;
+	u8 i;
+
+	DEBUGFUNC("ixgbe_set_san_mac_addr_generic");
+
+	/* Look for SAN mac address pointer.  If not defined, return */
+	ret_val = ixgbe_get_san_mac_addr_offset(hw, &san_mac_offset);
+	if (ret_val || san_mac_offset == 0 || san_mac_offset == 0xFFFF)
+		return IXGBE_ERR_NO_SAN_ADDR_PTR;
+
+	/* Make sure we know which port we need to write */
+	hw->mac.ops.set_lan_id(hw);
+	/* Apply the port offset to the address offset */
+	(hw->bus.func) ? (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT1_OFFSET) :
+			 (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT0_OFFSET);
+
+	for (i = 0; i < 3; i++) {
+		san_mac_data = (u16)((u16)(san_mac_addr[i * 2 + 1]) << 8);
+		san_mac_data |= (u16)(san_mac_addr[i * 2]);
+		hw->eeprom.ops.write(hw, san_mac_offset, san_mac_data);
+		san_mac_offset++;
+	}
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_get_pcie_msix_count_generic - Gets MSI-X vector count
+ *  @hw: pointer to hardware structure
+ *
+ *  Read PCIe configuration space, and get the MSI-X vector count from
+ *  the capabilities table.
+ **/
+u16 ixgbe_get_pcie_msix_count_generic(struct ixgbe_hw *hw)
+{
+	u16 msix_count = 1;
+	u16 max_msix_count;
+	u16 pcie_offset;
+
+	switch (hw->mac.type) {
+	case ixgbe_mac_82598EB:
+		pcie_offset = IXGBE_PCIE_MSIX_82598_CAPS;
+		max_msix_count = IXGBE_MAX_MSIX_VECTORS_82598;
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+	case ixgbe_mac_X550EM_a:
+		pcie_offset = IXGBE_PCIE_MSIX_82599_CAPS;
+		max_msix_count = IXGBE_MAX_MSIX_VECTORS_82599;
+		break;
+	default:
+		return msix_count;
+	}
+
+	DEBUGFUNC("ixgbe_get_pcie_msix_count_generic");
+	msix_count = IXGBE_READ_PCIE_WORD(hw, pcie_offset);
+	if (IXGBE_REMOVED(hw->hw_addr))
+		msix_count = 0;
+	msix_count &= IXGBE_PCIE_MSIX_TBL_SZ_MASK;
+
+	/* MSI-X count is zero-based in HW */
+	msix_count++;
+
+	if (msix_count > max_msix_count)
+		msix_count = max_msix_count;
+
+	return msix_count;
+}
+
+/**
+ *  ixgbe_insert_mac_addr_generic - Find a RAR for this mac address
+ *  @hw: pointer to hardware structure
+ *  @addr: Address to put into receive address register
+ *  @vmdq: VMDq pool to assign
+ *
+ *  Puts an ethernet address into a receive address register, or
+ *  finds the rar that it is aleady in; adds to the pool list
+ **/
+s32 ixgbe_insert_mac_addr_generic(struct ixgbe_hw *hw, u8 *addr, u32 vmdq)
+{
+	static const u32 NO_EMPTY_RAR_FOUND = 0xFFFFFFFF;
+	u32 first_empty_rar = NO_EMPTY_RAR_FOUND;
+	u32 rar;
+	u32 rar_low, rar_high;
+	u32 addr_low, addr_high;
+
+	DEBUGFUNC("ixgbe_insert_mac_addr_generic");
+
+	/* swap bytes for HW little endian */
+	addr_low  = addr[0] | (addr[1] << 8)
+			    | (addr[2] << 16)
+			    | (addr[3] << 24);
+	addr_high = addr[4] | (addr[5] << 8);
+
+	/*
+	 * Either find the mac_id in rar or find the first empty space.
+	 * rar_highwater points to just after the highest currently used
+	 * rar in order to shorten the search.  It grows when we add a new
+	 * rar to the top.
+	 */
+	for (rar = 0; rar < hw->mac.rar_highwater; rar++) {
+		rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar));
+
+		if (((IXGBE_RAH_AV & rar_high) == 0)
+		    && first_empty_rar == NO_EMPTY_RAR_FOUND) {
+			first_empty_rar = rar;
+		} else if ((rar_high & 0xFFFF) == addr_high) {
+			rar_low = IXGBE_READ_REG(hw, IXGBE_RAL(rar));
+			if (rar_low == addr_low)
+				break;    /* found it already in the rars */
+		}
+	}
+
+	if (rar < hw->mac.rar_highwater) {
+		/* already there so just add to the pool bits */
+		ixgbe_set_vmdq(hw, rar, vmdq);
+	} else if (first_empty_rar != NO_EMPTY_RAR_FOUND) {
+		/* stick it into first empty RAR slot we found */
+		rar = first_empty_rar;
+		ixgbe_set_rar(hw, rar, addr, vmdq, IXGBE_RAH_AV);
+	} else if (rar == hw->mac.rar_highwater) {
+		/* add it to the top of the list and inc the highwater mark */
+		ixgbe_set_rar(hw, rar, addr, vmdq, IXGBE_RAH_AV);
+		hw->mac.rar_highwater++;
+	} else if (rar >= hw->mac.num_rar_entries) {
+		return IXGBE_ERR_INVALID_MAC_ADDR;
+	}
+
+	/*
+	 * If we found rar[0], make sure the default pool bit (we use pool 0)
+	 * remains cleared to be sure default pool packets will get delivered
+	 */
+	if (rar == 0)
+		ixgbe_clear_vmdq(hw, rar, 0);
+
+	return rar;
+}
+
+/**
+ *  ixgbe_clear_vmdq_generic - Disassociate a VMDq pool index from a rx address
+ *  @hw: pointer to hardware struct
+ *  @rar: receive address register index to disassociate
+ *  @vmdq: VMDq pool index to remove from the rar
+ **/
+s32 ixgbe_clear_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
+{
+	u32 mpsar_lo, mpsar_hi;
+	u32 rar_entries = hw->mac.num_rar_entries;
+
+	DEBUGFUNC("ixgbe_clear_vmdq_generic");
+
+	/* Make sure we are using a valid rar index range */
+	if (rar >= rar_entries) {
+		ERROR_REPORT2(IXGBE_ERROR_ARGUMENT,
+			     "RAR index %d is out of range.\n", rar);
+		return IXGBE_ERR_INVALID_ARGUMENT;
+	}
+
+	mpsar_lo = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar));
+	mpsar_hi = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar));
+
+	if (IXGBE_REMOVED(hw->hw_addr))
+		goto done;
+
+	if (!mpsar_lo && !mpsar_hi)
+		goto done;
+
+	if (vmdq == IXGBE_CLEAR_VMDQ_ALL) {
+		if (mpsar_lo) {
+			IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), 0);
+			mpsar_lo = 0;
+		}
+		if (mpsar_hi) {
+			IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), 0);
+			mpsar_hi = 0;
+		}
+	} else if (vmdq < 32) {
+		mpsar_lo &= ~(1 << vmdq);
+		IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar_lo);
+	} else {
+		mpsar_hi &= ~(1 << (vmdq - 32));
+		IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar_hi);
+	}
+
+	/* was that the last pool using this rar? */
+	if (mpsar_lo == 0 && mpsar_hi == 0 && rar != 0)
+		hw->mac.ops.clear_rar(hw, rar);
+done:
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_set_vmdq_generic - Associate a VMDq pool index with a rx address
+ *  @hw: pointer to hardware struct
+ *  @rar: receive address register index to associate with a VMDq index
+ *  @vmdq: VMDq pool index
+ **/
+s32 ixgbe_set_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
+{
+	u32 mpsar;
+	u32 rar_entries = hw->mac.num_rar_entries;
+
+	DEBUGFUNC("ixgbe_set_vmdq_generic");
+
+	/* Make sure we are using a valid rar index range */
+	if (rar >= rar_entries) {
+		ERROR_REPORT2(IXGBE_ERROR_ARGUMENT,
+			     "RAR index %d is out of range.\n", rar);
+		return IXGBE_ERR_INVALID_ARGUMENT;
+	}
+
+	if (vmdq < 32) {
+		mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar));
+		mpsar |= 1 << vmdq;
+		IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar);
+	} else {
+		mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar));
+		mpsar |= 1 << (vmdq - 32);
+		IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar);
+	}
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  This function should only be involved in the IOV mode.
+ *  In IOV mode, Default pool is next pool after the number of
+ *  VFs advertized and not 0.
+ *  MPSAR table needs to be updated for SAN_MAC RAR [hw->mac.san_mac_rar_index]
+ *
+ *  ixgbe_set_vmdq_san_mac - Associate default VMDq pool index with a rx address
+ *  @hw: pointer to hardware struct
+ *  @vmdq: VMDq pool index
+ **/
+s32 ixgbe_set_vmdq_san_mac_generic(struct ixgbe_hw *hw, u32 vmdq)
+{
+	u32 rar = hw->mac.san_mac_rar_index;
+
+	DEBUGFUNC("ixgbe_set_vmdq_san_mac");
+
+	if (vmdq < 32) {
+		IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), 1 << vmdq);
+		IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), 0);
+	} else {
+		IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), 0);
+		IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), 1 << (vmdq - 32));
+	}
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_init_uta_tables_generic - Initialize the Unicast Table Array
+ *  @hw: pointer to hardware structure
+ **/
+s32 ixgbe_init_uta_tables_generic(struct ixgbe_hw *hw)
+{
+	int i;
+
+	DEBUGFUNC("ixgbe_init_uta_tables_generic");
+	DEBUGOUT(" Clearing UTA\n");
+
+	for (i = 0; i < 128; i++)
+		IXGBE_WRITE_REG(hw, IXGBE_UTA(i), 0);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_find_vlvf_slot - find the vlanid or the first empty slot
+ *  @hw: pointer to hardware structure
+ *  @vlan: VLAN id to write to VLAN filter
+ *
+ *  return the VLVF index where this VLAN id should be placed
+ *
+ **/
+s32 ixgbe_find_vlvf_slot(struct ixgbe_hw *hw, u32 vlan)
+{
+	u32 bits = 0;
+	u32 first_empty_slot = 0;
+	s32 regindex;
+
+	/* short cut the special case */
+	if (vlan == 0)
+		return 0;
+
+	/*
+	  * Search for the vlan id in the VLVF entries. Save off the first empty
+	  * slot found along the way
+	  */
+	for (regindex = 1; regindex < IXGBE_VLVF_ENTRIES; regindex++) {
+		bits = IXGBE_READ_REG(hw, IXGBE_VLVF(regindex));
+		if (!bits && !(first_empty_slot))
+			first_empty_slot = regindex;
+		else if ((bits & 0x0FFF) == vlan)
+			break;
+	}
+
+	/*
+	  * If regindex is less than IXGBE_VLVF_ENTRIES, then we found the vlan
+	  * in the VLVF. Else use the first empty VLVF register for this
+	  * vlan id.
+	  */
+	if (regindex >= IXGBE_VLVF_ENTRIES) {
+		if (first_empty_slot)
+			regindex = first_empty_slot;
+		else {
+			ERROR_REPORT1(IXGBE_ERROR_SOFTWARE,
+				     "No space in VLVF.\n");
+			regindex = IXGBE_ERR_NO_SPACE;
+		}
+	}
+
+	return regindex;
+}
+
+/**
+ *  ixgbe_set_vfta_generic - Set VLAN filter table
+ *  @hw: pointer to hardware structure
+ *  @vlan: VLAN id to write to VLAN filter
+ *  @vind: VMDq output index that maps queue to VLAN id in VFVFB
+ *  @vlan_on: boolean flag to turn on/off VLAN in VFVF
+ *
+ *  Turn on/off specified VLAN in the VLAN filter table.
+ **/
+s32 ixgbe_set_vfta_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind,
+			   bool vlan_on)
+{
+	s32 regindex;
+	u32 bitindex;
+	u32 vfta;
+	u32 targetbit;
+	s32 ret_val = IXGBE_SUCCESS;
+	bool vfta_changed = false;
+
+	DEBUGFUNC("ixgbe_set_vfta_generic");
+
+	if (vlan > 4095)
+		return IXGBE_ERR_PARAM;
+
+	/*
+	 * this is a 2 part operation - first the VFTA, then the
+	 * VLVF and VLVFB if VT Mode is set
+	 * We don't write the VFTA until we know the VLVF part succeeded.
+	 */
+
+	/* Part 1
+	 * The VFTA is a bitstring made up of 128 32-bit registers
+	 * that enable the particular VLAN id, much like the MTA:
+	 *    bits[11-5]: which register
+	 *    bits[4-0]:  which bit in the register
+	 */
+	regindex = (vlan >> 5) & 0x7F;
+	bitindex = vlan & 0x1F;
+	targetbit = (1 << bitindex);
+	vfta = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex));
+
+	if (vlan_on) {
+		if (!(vfta & targetbit)) {
+			vfta |= targetbit;
+			vfta_changed = true;
+		}
+	} else {
+		if ((vfta & targetbit)) {
+			vfta &= ~targetbit;
+			vfta_changed = true;
+		}
+	}
+
+	/* Part 2
+	 * Call ixgbe_set_vlvf_generic to set VLVFB and VLVF
+	 */
+	ret_val = ixgbe_set_vlvf_generic(hw, vlan, vind, vlan_on,
+					 &vfta_changed);
+	if (ret_val != IXGBE_SUCCESS)
+		return ret_val;
+
+	if (vfta_changed)
+		IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), vfta);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_set_vlvf_generic - Set VLAN Pool Filter
+ *  @hw: pointer to hardware structure
+ *  @vlan: VLAN id to write to VLAN filter
+ *  @vind: VMDq output index that maps queue to VLAN id in VFVFB
+ *  @vlan_on: boolean flag to turn on/off VLAN in VFVF
+ *  @vfta_changed: pointer to boolean flag which indicates whether VFTA
+ *                 should be changed
+ *
+ *  Turn on/off specified bit in VLVF table.
+ **/
+s32 ixgbe_set_vlvf_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind,
+			    bool vlan_on, bool *vfta_changed)
+{
+	u32 vt;
+
+	DEBUGFUNC("ixgbe_set_vlvf_generic");
+
+	if (vlan > 4095)
+		return IXGBE_ERR_PARAM;
+
+	/* If VT Mode is set
+	 *   Either vlan_on
+	 *     make sure the vlan is in VLVF
+	 *     set the vind bit in the matching VLVFB
+	 *   Or !vlan_on
+	 *     clear the pool bit and possibly the vind
+	 */
+	vt = IXGBE_READ_REG(hw, IXGBE_VT_CTL);
+	if (vt & IXGBE_VT_CTL_VT_ENABLE) {
+		s32 vlvf_index;
+		u32 bits;
+
+		vlvf_index = ixgbe_find_vlvf_slot(hw, vlan);
+		if (vlvf_index < 0)
+			return vlvf_index;
+
+		if (vlan_on) {
+			/* set the pool bit */
+			if (vind < 32) {
+				bits = IXGBE_READ_REG(hw,
+						IXGBE_VLVFB(vlvf_index * 2));
+				bits |= (1 << vind);
+				IXGBE_WRITE_REG(hw,
+						IXGBE_VLVFB(vlvf_index * 2),
+						bits);
+			} else {
+				bits = IXGBE_READ_REG(hw,
+					IXGBE_VLVFB((vlvf_index * 2) + 1));
+				bits |= (1 << (vind - 32));
+				IXGBE_WRITE_REG(hw,
+					IXGBE_VLVFB((vlvf_index * 2) + 1),
+					bits);
+			}
+		} else {
+			/* clear the pool bit */
+			if (vind < 32) {
+				bits = IXGBE_READ_REG(hw,
+						IXGBE_VLVFB(vlvf_index * 2));
+				bits &= ~(1 << vind);
+				IXGBE_WRITE_REG(hw,
+						IXGBE_VLVFB(vlvf_index * 2),
+						bits);
+				bits |= IXGBE_READ_REG(hw,
+					IXGBE_VLVFB((vlvf_index * 2) + 1));
+			} else {
+				bits = IXGBE_READ_REG(hw,
+					IXGBE_VLVFB((vlvf_index * 2) + 1));
+				bits &= ~(1 << (vind - 32));
+				IXGBE_WRITE_REG(hw,
+					IXGBE_VLVFB((vlvf_index * 2) + 1),
+					bits);
+				bits |= IXGBE_READ_REG(hw,
+						IXGBE_VLVFB(vlvf_index * 2));
+			}
+		}
+
+		/*
+		 * If there are still bits set in the VLVFB registers
+		 * for the VLAN ID indicated we need to see if the
+		 * caller is requesting that we clear the VFTA entry bit.
+		 * If the caller has requested that we clear the VFTA
+		 * entry bit but there are still pools/VFs using this VLAN
+		 * ID entry then ignore the request.  We're not worried
+		 * about the case where we're turning the VFTA VLAN ID
+		 * entry bit on, only when requested to turn it off as
+		 * there may be multiple pools and/or VFs using the
+		 * VLAN ID entry.  In that case we cannot clear the
+		 * VFTA bit until all pools/VFs using that VLAN ID have also
+		 * been cleared.  This will be indicated by "bits" being
+		 * zero.
+		 */
+		if (bits) {
+			IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index),
+					(IXGBE_VLVF_VIEN | vlan));
+			if ((!vlan_on) && (vfta_changed != NULL)) {
+				/* someone wants to clear the vfta entry
+				 * but some pools/VFs are still using it.
+				 * Ignore it. */
+				*vfta_changed = false;
+			}
+		} else
+			IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index), 0);
+	}
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_clear_vfta_generic - Clear VLAN filter table
+ *  @hw: pointer to hardware structure
+ *
+ *  Clears the VLAN filer table, and the VMDq index associated with the filter
+ **/
+s32 ixgbe_clear_vfta_generic(struct ixgbe_hw *hw)
+{
+	u32 offset;
+
+	DEBUGFUNC("ixgbe_clear_vfta_generic");
+
+	for (offset = 0; offset < hw->mac.vft_size; offset++)
+		IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0);
+
+	for (offset = 0; offset < IXGBE_VLVF_ENTRIES; offset++) {
+		IXGBE_WRITE_REG(hw, IXGBE_VLVF(offset), 0);
+		IXGBE_WRITE_REG(hw, IXGBE_VLVFB(offset * 2), 0);
+		IXGBE_WRITE_REG(hw, IXGBE_VLVFB((offset * 2) + 1), 0);
+	}
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_check_mac_link_generic - Determine link and speed status
+ *  @hw: pointer to hardware structure
+ *  @speed: pointer to link speed
+ *  @link_up: true when link is up
+ *  @link_up_wait_to_complete: bool used to wait for link up or not
+ *
+ *  Reads the links register to determine if link is up and the current speed
+ **/
+s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+				 bool *link_up, bool link_up_wait_to_complete)
+{
+	u32 links_reg, links_orig;
+	u32 i;
+
+	DEBUGFUNC("ixgbe_check_mac_link_generic");
+
+	/* clear the old state */
+	links_orig = IXGBE_READ_REG(hw, IXGBE_LINKS);
+
+	links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
+
+	if (links_orig != links_reg) {
+		DEBUGOUT2("LINKS changed from %08X to %08X\n",
+			  links_orig, links_reg);
+	}
+
+	if (link_up_wait_to_complete) {
+		for (i = 0; i < hw->mac.max_link_up_time; i++) {
+			if (links_reg & IXGBE_LINKS_UP) {
+				*link_up = true;
+				break;
+			} else {
+				*link_up = false;
+			}
+			msec_delay(100);
+			links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
+		}
+	} else {
+		if (links_reg & IXGBE_LINKS_UP)
+			*link_up = true;
+		else
+			*link_up = false;
+	}
+
+	switch (links_reg & IXGBE_LINKS_SPEED_82599) {
+	case IXGBE_LINKS_SPEED_10G_82599:
+		*speed = IXGBE_LINK_SPEED_10GB_FULL;
+		if (hw->mac.type >= ixgbe_mac_X550) {
+			if (links_reg & IXGBE_LINKS_SPEED_NON_STD)
+				*speed = IXGBE_LINK_SPEED_2_5GB_FULL;
+		}
+		break;
+	case IXGBE_LINKS_SPEED_1G_82599:
+		*speed = IXGBE_LINK_SPEED_1GB_FULL;
+		break;
+	case IXGBE_LINKS_SPEED_100_82599:
+		*speed = IXGBE_LINK_SPEED_100_FULL;
+		if (hw->mac.type >= ixgbe_mac_X550) {
+			if (links_reg & IXGBE_LINKS_SPEED_NON_STD)
+				*speed = IXGBE_LINK_SPEED_5GB_FULL;
+		}
+		break;
+	default:
+		*speed = IXGBE_LINK_SPEED_UNKNOWN;
+	}
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_get_wwn_prefix_generic - Get alternative WWNN/WWPN prefix from
+ *  the EEPROM
+ *  @hw: pointer to hardware structure
+ *  @wwnn_prefix: the alternative WWNN prefix
+ *  @wwpn_prefix: the alternative WWPN prefix
+ *
+ *  This function will read the EEPROM from the alternative SAN MAC address
+ *  block to check the support for the alternative WWNN/WWPN prefix support.
+ **/
+s32 ixgbe_get_wwn_prefix_generic(struct ixgbe_hw *hw, u16 *wwnn_prefix,
+				 u16 *wwpn_prefix)
+{
+	u16 offset, caps;
+	u16 alt_san_mac_blk_offset;
+
+	DEBUGFUNC("ixgbe_get_wwn_prefix_generic");
+
+	/* clear output first */
+	*wwnn_prefix = 0xFFFF;
+	*wwpn_prefix = 0xFFFF;
+
+	/* check if alternative SAN MAC is supported */
+	offset = IXGBE_ALT_SAN_MAC_ADDR_BLK_PTR;
+	if (hw->eeprom.ops.read(hw, offset, &alt_san_mac_blk_offset))
+		goto wwn_prefix_err;
+
+	if ((alt_san_mac_blk_offset == 0) ||
+	    (alt_san_mac_blk_offset == 0xFFFF))
+		goto wwn_prefix_out;
+
+	/* check capability in alternative san mac address block */
+	offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_CAPS_OFFSET;
+	if (hw->eeprom.ops.read(hw, offset, &caps))
+		goto wwn_prefix_err;
+	if (!(caps & IXGBE_ALT_SAN_MAC_ADDR_CAPS_ALTWWN))
+		goto wwn_prefix_out;
+
+	/* get the corresponding prefix for WWNN/WWPN */
+	offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWNN_OFFSET;
+	if (hw->eeprom.ops.read(hw, offset, wwnn_prefix)) {
+		ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+			      "eeprom read at offset %d failed", offset);
+	}
+
+	offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWPN_OFFSET;
+	if (hw->eeprom.ops.read(hw, offset, wwpn_prefix))
+		goto wwn_prefix_err;
+
+wwn_prefix_out:
+	return IXGBE_SUCCESS;
+
+wwn_prefix_err:
+	ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+		      "eeprom read at offset %d failed", offset);
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_get_fcoe_boot_status_generic - Get FCOE boot status from EEPROM
+ *  @hw: pointer to hardware structure
+ *  @bs: the fcoe boot status
+ *
+ *  This function will read the FCOE boot status from the iSCSI FCOE block
+ **/
+s32 ixgbe_get_fcoe_boot_status_generic(struct ixgbe_hw *hw, u16 *bs)
+{
+	u16 offset, caps, flags;
+	s32 status;
+
+	DEBUGFUNC("ixgbe_get_fcoe_boot_status_generic");
+
+	/* clear output first */
+	*bs = ixgbe_fcoe_bootstatus_unavailable;
+
+	/* check if FCOE IBA block is present */
+	offset = IXGBE_FCOE_IBA_CAPS_BLK_PTR;
+	status = hw->eeprom.ops.read(hw, offset, &caps);
+	if (status != IXGBE_SUCCESS)
+		goto out;
+
+	if (!(caps & IXGBE_FCOE_IBA_CAPS_FCOE))
+		goto out;
+
+	/* check if iSCSI FCOE block is populated */
+	status = hw->eeprom.ops.read(hw, IXGBE_ISCSI_FCOE_BLK_PTR, &offset);
+	if (status != IXGBE_SUCCESS)
+		goto out;
+
+	if ((offset == 0) || (offset == 0xFFFF))
+		goto out;
+
+	/* read fcoe flags in iSCSI FCOE block */
+	offset = offset + IXGBE_ISCSI_FCOE_FLAGS_OFFSET;
+	status = hw->eeprom.ops.read(hw, offset, &flags);
+	if (status != IXGBE_SUCCESS)
+		goto out;
+
+	if (flags & IXGBE_ISCSI_FCOE_FLAGS_ENABLE)
+		*bs = ixgbe_fcoe_bootstatus_enabled;
+	else
+		*bs = ixgbe_fcoe_bootstatus_disabled;
+
+out:
+	return status;
+}
+
+/**
+ *  ixgbe_set_mac_anti_spoofing - Enable/Disable MAC anti-spoofing
+ *  @hw: pointer to hardware structure
+ *  @enable: enable or disable switch for anti-spoofing
+ *  @pf: Physical Function pool - do not enable anti-spoofing for the PF
+ *
+ **/
+void ixgbe_set_mac_anti_spoofing(struct ixgbe_hw *hw, bool enable, int pf)
+{
+	int j;
+	int pf_target_reg = pf >> 3;
+	int pf_target_shift = pf % 8;
+	u32 pfvfspoof = 0;
+
+	if (hw->mac.type == ixgbe_mac_82598EB)
+		return;
+
+	if (enable)
+		pfvfspoof = IXGBE_SPOOF_MACAS_MASK;
+
+	/*
+	 * PFVFSPOOF register array is size 8 with 8 bits assigned to
+	 * MAC anti-spoof enables in each register array element.
+	 */
+	for (j = 0; j < pf_target_reg; j++)
+		IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(j), pfvfspoof);
+
+	/*
+	 * The PF should be allowed to spoof so that it can support
+	 * emulation mode NICs.  Do not set the bits assigned to the PF
+	 */
+	pfvfspoof &= (1 << pf_target_shift) - 1;
+	IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(j), pfvfspoof);
+
+	/*
+	 * Remaining pools belong to the PF so they do not need to have
+	 * anti-spoofing enabled.
+	 */
+	for (j++; j < IXGBE_PFVFSPOOF_REG_COUNT; j++)
+		IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(j), 0);
+}
+
+/**
+ *  ixgbe_set_vlan_anti_spoofing - Enable/Disable VLAN anti-spoofing
+ *  @hw: pointer to hardware structure
+ *  @enable: enable or disable switch for VLAN anti-spoofing
+ *  @vf: Virtual Function pool - VF Pool to set for VLAN anti-spoofing
+ *
+ **/
+void ixgbe_set_vlan_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf)
+{
+	int vf_target_reg = vf >> 3;
+	int vf_target_shift = vf % 8 + IXGBE_SPOOF_VLANAS_SHIFT;
+	u32 pfvfspoof;
+
+	if (hw->mac.type == ixgbe_mac_82598EB)
+		return;
+
+	pfvfspoof = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg));
+	if (enable)
+		pfvfspoof |= (1 << vf_target_shift);
+	else
+		pfvfspoof &= ~(1 << vf_target_shift);
+	IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg), pfvfspoof);
+}
+
+/**
+ *  ixgbe_get_device_caps_generic - Get additional device capabilities
+ *  @hw: pointer to hardware structure
+ *  @device_caps: the EEPROM word with the extra device capabilities
+ *
+ *  This function will read the EEPROM location for the device capabilities,
+ *  and return the word through device_caps.
+ **/
+s32 ixgbe_get_device_caps_generic(struct ixgbe_hw *hw, u16 *device_caps)
+{
+	DEBUGFUNC("ixgbe_get_device_caps_generic");
+
+	hw->eeprom.ops.read(hw, IXGBE_DEVICE_CAPS, device_caps);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_enable_relaxed_ordering_gen2 - Enable relaxed ordering
+ *  @hw: pointer to hardware structure
+ *
+ **/
+void ixgbe_enable_relaxed_ordering_gen2(struct ixgbe_hw *hw)
+{
+	u32 regval;
+	u32 i;
+
+	DEBUGFUNC("ixgbe_enable_relaxed_ordering_gen2");
+
+	/* Enable relaxed ordering */
+	for (i = 0; i < hw->mac.max_tx_queues; i++) {
+		regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(i));
+		regval |= IXGBE_DCA_TXCTRL_DESC_WRO_EN;
+		IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(i), regval);
+	}
+
+	for (i = 0; i < hw->mac.max_rx_queues; i++) {
+		regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
+		regval |= IXGBE_DCA_RXCTRL_DATA_WRO_EN |
+			  IXGBE_DCA_RXCTRL_HEAD_WRO_EN;
+		IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
+	}
+
+}
+
+/**
+ *  ixgbe_calculate_checksum - Calculate checksum for buffer
+ *  @buffer: pointer to EEPROM
+ *  @length: size of EEPROM to calculate a checksum for
+ *  Calculates the checksum for some buffer on a specified length.  The
+ *  checksum calculated is returned.
+ **/
+u8 ixgbe_calculate_checksum(u8 *buffer, u32 length)
+{
+	u32 i;
+	u8 sum = 0;
+
+	DEBUGFUNC("ixgbe_calculate_checksum");
+
+	if (!buffer)
+		return 0;
+
+	for (i = 0; i < length; i++)
+		sum += buffer[i];
+
+	return (u8) (0 - sum);
+}
+
+/**
+ *  ixgbe_host_interface_command - Issue command to manageability block
+ *  @hw: pointer to the HW structure
+ *  @buffer: contains the command to write and where the return status will
+ *   be placed
+ *  @length: length of buffer, must be multiple of 4 bytes
+ *  @timeout: time in ms to wait for command completion
+ *  @return_data: read and return data from the buffer (true) or not (false)
+ *   Needed because FW structures are big endian and decoding of
+ *   these fields can be 8 bit or 16 bit based on command. Decoding
+ *   is not easily understood without making a table of commands.
+ *   So we will leave this up to the caller to read back the data
+ *   in these cases.
+ *
+ *  Communicates with the manageability block.  On success return IXGBE_SUCCESS
+ *  else return IXGBE_ERR_HOST_INTERFACE_COMMAND.
+ **/
+s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer,
+				 u32 length, u32 timeout, bool return_data)
+{
+	u32 hicr, i, bi, fwsts;
+	u32 hdr_size = sizeof(struct ixgbe_hic_hdr);
+	u16 buf_len;
+	u16 dword_len;
+
+	DEBUGFUNC("ixgbe_host_interface_command");
+
+	if (length == 0 || length > IXGBE_HI_MAX_BLOCK_BYTE_LENGTH) {
+		DEBUGOUT1("Buffer length failure buffersize=%d.\n", length);
+		return IXGBE_ERR_HOST_INTERFACE_COMMAND;
+	}
+	/* Set bit 9 of FWSTS clearing FW reset indication */
+	fwsts = IXGBE_READ_REG(hw, IXGBE_FWSTS);
+	IXGBE_WRITE_REG(hw, IXGBE_FWSTS, fwsts | IXGBE_FWSTS_FWRI);
+
+	/* Check that the host interface is enabled. */
+	hicr = IXGBE_READ_REG(hw, IXGBE_HICR);
+	if ((hicr & IXGBE_HICR_EN) == 0) {
+		DEBUGOUT("IXGBE_HOST_EN bit disabled.\n");
+		return IXGBE_ERR_HOST_INTERFACE_COMMAND;
+	}
+
+	/* Calculate length in DWORDs. We must be DWORD aligned */
+	if ((length % (sizeof(u32))) != 0) {
+		DEBUGOUT("Buffer length failure, not aligned to dword");
+		return IXGBE_ERR_INVALID_ARGUMENT;
+	}
+
+	dword_len = length >> 2;
+
+	/* The device driver writes the relevant command block
+	 * into the ram area.
+	 */
+	for (i = 0; i < dword_len; i++)
+		IXGBE_WRITE_REG_ARRAY(hw, IXGBE_FLEX_MNG,
+				      i, IXGBE_CPU_TO_LE32(buffer[i]));
+
+	/* Setting this bit tells the ARC that a new command is pending. */
+	IXGBE_WRITE_REG(hw, IXGBE_HICR, hicr | IXGBE_HICR_C);
+
+	for (i = 0; i < timeout; i++) {
+		hicr = IXGBE_READ_REG(hw, IXGBE_HICR);
+		if (!(hicr & IXGBE_HICR_C))
+			break;
+		msec_delay(1);
+	}
+
+	/* Check command completion */
+	if ((timeout != 0 && i == timeout) ||
+	    !(IXGBE_READ_REG(hw, IXGBE_HICR) & IXGBE_HICR_SV)) {
+		ERROR_REPORT1(IXGBE_ERROR_CAUTION,
+			     "Command has failed with no status valid.\n");
+		return IXGBE_ERR_HOST_INTERFACE_COMMAND;
+	}
+
+	if (!return_data)
+		return 0;
+
+	/* Calculate length in DWORDs */
+	dword_len = hdr_size >> 2;
+
+	/* first pull in the header so we know the buffer length */
+	for (bi = 0; bi < dword_len; bi++) {
+		buffer[bi] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, bi);
+		IXGBE_LE32_TO_CPUS(&buffer[bi]);
+	}
+
+	/* If there is any thing in data position pull it in */
+	buf_len = ((struct ixgbe_hic_hdr *)buffer)->buf_len;
+	if (buf_len == 0)
+		return 0;
+
+	if (length < buf_len + hdr_size) {
+		DEBUGOUT("Buffer not large enough for reply message.\n");
+		return IXGBE_ERR_HOST_INTERFACE_COMMAND;
+	}
+
+	/* Calculate length in DWORDs, add 3 for odd lengths */
+	dword_len = (buf_len + 3) >> 2;
+
+	/* Pull in the rest of the buffer (bi is where we left off) */
+	for (; bi <= dword_len; bi++) {
+		buffer[bi] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, bi);
+		IXGBE_LE32_TO_CPUS(&buffer[bi]);
+	}
+
+	return 0;
+}
+
+/**
+ *  ixgbe_set_fw_drv_ver_generic - Sends driver version to firmware
+ *  @hw: pointer to the HW structure
+ *  @maj: driver version major number
+ *  @min: driver version minor number
+ *  @build: driver version build number
+ *  @sub: driver version sub build number
+ *
+ *  Sends driver version number to firmware through the manageability
+ *  block.  On success return IXGBE_SUCCESS
+ *  else returns IXGBE_ERR_SWFW_SYNC when encountering an error acquiring
+ *  semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails.
+ **/
+s32 ixgbe_set_fw_drv_ver_generic(struct ixgbe_hw *hw, u8 maj, u8 min,
+				 u8 build, u8 sub)
+{
+	struct ixgbe_hic_drv_info fw_cmd;
+	int i;
+	s32 ret_val = IXGBE_SUCCESS;
+
+	DEBUGFUNC("ixgbe_set_fw_drv_ver_generic");
+
+	if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM)
+	    != IXGBE_SUCCESS) {
+		ret_val = IXGBE_ERR_SWFW_SYNC;
+		goto out;
+	}
+
+	fw_cmd.hdr.cmd = FW_CEM_CMD_DRIVER_INFO;
+	fw_cmd.hdr.buf_len = FW_CEM_CMD_DRIVER_INFO_LEN;
+	fw_cmd.hdr.cmd_or_resp.cmd_resv = FW_CEM_CMD_RESERVED;
+	fw_cmd.port_num = (u8)hw->bus.func;
+	fw_cmd.ver_maj = maj;
+	fw_cmd.ver_min = min;
+	fw_cmd.ver_build = build;
+	fw_cmd.ver_sub = sub;
+	fw_cmd.hdr.checksum = 0;
+	fw_cmd.hdr.checksum = ixgbe_calculate_checksum((u8 *)&fw_cmd,
+				(FW_CEM_HDR_LEN + fw_cmd.hdr.buf_len));
+	fw_cmd.pad = 0;
+	fw_cmd.pad2 = 0;
+
+	for (i = 0; i <= FW_CEM_MAX_RETRIES; i++) {
+		ret_val = ixgbe_host_interface_command(hw, (u32 *)&fw_cmd,
+						       sizeof(fw_cmd),
+						       IXGBE_HI_COMMAND_TIMEOUT,
+						       true);
+		if (ret_val != IXGBE_SUCCESS)
+			continue;
+
+		if (fw_cmd.hdr.cmd_or_resp.ret_status ==
+		    FW_CEM_RESP_STATUS_SUCCESS)
+			ret_val = IXGBE_SUCCESS;
+		else
+			ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND;
+
+		break;
+	}
+
+	hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM);
+out:
+	return ret_val;
+}
+
+/**
+ * ixgbe_set_rxpba_generic - Initialize Rx packet buffer
+ * @hw: pointer to hardware structure
+ * @num_pb: number of packet buffers to allocate
+ * @headroom: reserve n KB of headroom
+ * @strategy: packet buffer allocation strategy
+ **/
+void ixgbe_set_rxpba_generic(struct ixgbe_hw *hw, int num_pb, u32 headroom,
+			     int strategy)
+{
+	u32 pbsize = hw->mac.rx_pb_size;
+	int i = 0;
+	u32 rxpktsize, txpktsize, txpbthresh;
+
+	/* Reserve headroom */
+	pbsize -= headroom;
+
+	if (!num_pb)
+		num_pb = 1;
+
+	/* Divide remaining packet buffer space amongst the number of packet
+	 * buffers requested using supplied strategy.
+	 */
+	switch (strategy) {
+	case PBA_STRATEGY_WEIGHTED:
+		/* ixgbe_dcb_pba_80_48 strategy weight first half of packet
+		 * buffer with 5/8 of the packet buffer space.
+		 */
+		rxpktsize = (pbsize * 5) / (num_pb * 4);
+		pbsize -= rxpktsize * (num_pb / 2);
+		rxpktsize <<= IXGBE_RXPBSIZE_SHIFT;
+		for (; i < (num_pb / 2); i++)
+			IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize);
+		/* Fall through to configure remaining packet buffers */
+	case PBA_STRATEGY_EQUAL:
+		rxpktsize = (pbsize / (num_pb - i)) << IXGBE_RXPBSIZE_SHIFT;
+		for (; i < num_pb; i++)
+			IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize);
+		break;
+	default:
+		break;
+	}
+
+	/* Only support an equally distributed Tx packet buffer strategy. */
+	txpktsize = IXGBE_TXPBSIZE_MAX / num_pb;
+	txpbthresh = (txpktsize / 1024) - IXGBE_TXPKT_SIZE_MAX;
+	for (i = 0; i < num_pb; i++) {
+		IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), txpktsize);
+		IXGBE_WRITE_REG(hw, IXGBE_TXPBTHRESH(i), txpbthresh);
+	}
+
+	/* Clear unused TCs, if any, to zero buffer size*/
+	for (; i < IXGBE_MAX_PB; i++) {
+		IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), 0);
+		IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), 0);
+		IXGBE_WRITE_REG(hw, IXGBE_TXPBTHRESH(i), 0);
+	}
+}
+
+/**
+ * ixgbe_clear_tx_pending - Clear pending TX work from the PCIe fifo
+ * @hw: pointer to the hardware structure
+ *
+ * The 82599 and x540 MACs can experience issues if TX work is still pending
+ * when a reset occurs.  This function prevents this by flushing the PCIe
+ * buffers on the system.
+ **/
+void ixgbe_clear_tx_pending(struct ixgbe_hw *hw)
+{
+	u32 gcr_ext, hlreg0, i, poll;
+	u16 value;
+
+	/*
+	 * If double reset is not requested then all transactions should
+	 * already be clear and as such there is no work to do
+	 */
+	if (!(hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED))
+		return;
+
+	/*
+	 * Set loopback enable to prevent any transmits from being sent
+	 * should the link come up.  This assumes that the RXCTRL.RXEN bit
+	 * has already been cleared.
+	 */
+	hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0);
+	IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0 | IXGBE_HLREG0_LPBK);
+
+	/* Wait for a last completion before clearing buffers */
+	IXGBE_WRITE_FLUSH(hw);
+	msec_delay(3);
+
+	/*
+	 * Before proceeding, make sure that the PCIe block does not have
+	 * transactions pending.
+	 */
+	poll = ixgbe_pcie_timeout_poll(hw);
+	for (i = 0; i < poll; i++) {
+		usec_delay(100);
+		value = IXGBE_READ_PCIE_WORD(hw, IXGBE_PCI_DEVICE_STATUS);
+		if (IXGBE_REMOVED(hw->hw_addr))
+			goto out;
+		if (!(value & IXGBE_PCI_DEVICE_STATUS_TRANSACTION_PENDING))
+			goto out;
+	}
+
+out:
+	/* initiate cleaning flow for buffers in the PCIe transaction layer */
+	gcr_ext = IXGBE_READ_REG(hw, IXGBE_GCR_EXT);
+	IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT,
+			gcr_ext | IXGBE_GCR_EXT_BUFFERS_CLEAR);
+
+	/* Flush all writes and allow 20usec for all transactions to clear */
+	IXGBE_WRITE_FLUSH(hw);
+	usec_delay(20);
+
+	/* restore previous register values */
+	IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT, gcr_ext);
+	IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0);
+}
+
+STATIC const u8 ixgbe_emc_temp_data[4] = {
+	IXGBE_EMC_INTERNAL_DATA,
+	IXGBE_EMC_DIODE1_DATA,
+	IXGBE_EMC_DIODE2_DATA,
+	IXGBE_EMC_DIODE3_DATA
+};
+STATIC const u8 ixgbe_emc_therm_limit[4] = {
+	IXGBE_EMC_INTERNAL_THERM_LIMIT,
+	IXGBE_EMC_DIODE1_THERM_LIMIT,
+	IXGBE_EMC_DIODE2_THERM_LIMIT,
+	IXGBE_EMC_DIODE3_THERM_LIMIT
+};
+
+/**
+ *  ixgbe_get_thermal_sensor_data - Gathers thermal sensor data
+ *  @hw: pointer to hardware structure
+ *  @data: pointer to the thermal sensor data structure
+ *
+ *  Returns the thermal sensor data structure
+ **/
+s32 ixgbe_get_thermal_sensor_data_generic(struct ixgbe_hw *hw)
+{
+	s32 status = IXGBE_SUCCESS;
+	u16 ets_offset;
+	u16 ets_cfg;
+	u16 ets_sensor;
+	u8  num_sensors;
+	u8  sensor_index;
+	u8  sensor_location;
+	u8  i;
+	struct ixgbe_thermal_sensor_data *data = &hw->mac.thermal_sensor_data;
+
+	DEBUGFUNC("ixgbe_get_thermal_sensor_data_generic");
+
+	/* Only support thermal sensors attached to 82599 physical port 0 */
+	if ((hw->mac.type != ixgbe_mac_82599EB) ||
+	    (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)) {
+		status = IXGBE_NOT_IMPLEMENTED;
+		goto out;
+	}
+
+	status = hw->eeprom.ops.read(hw, IXGBE_ETS_CFG, &ets_offset);
+	if (status)
+		goto out;
+
+	if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF)) {
+		status = IXGBE_NOT_IMPLEMENTED;
+		goto out;
+	}
+
+	status = hw->eeprom.ops.read(hw, ets_offset, &ets_cfg);
+	if (status)
+		goto out;
+
+	if (((ets_cfg & IXGBE_ETS_TYPE_MASK) >> IXGBE_ETS_TYPE_SHIFT)
+		!= IXGBE_ETS_TYPE_EMC) {
+		status = IXGBE_NOT_IMPLEMENTED;
+		goto out;
+	}
+
+	num_sensors = (ets_cfg & IXGBE_ETS_NUM_SENSORS_MASK);
+	if (num_sensors > IXGBE_MAX_SENSORS)
+		num_sensors = IXGBE_MAX_SENSORS;
+
+	for (i = 0; i < num_sensors; i++) {
+		status = hw->eeprom.ops.read(hw, (ets_offset + 1 + i),
+					     &ets_sensor);
+		if (status)
+			goto out;
+
+		sensor_index = ((ets_sensor & IXGBE_ETS_DATA_INDEX_MASK) >>
+				IXGBE_ETS_DATA_INDEX_SHIFT);
+		sensor_location = ((ets_sensor & IXGBE_ETS_DATA_LOC_MASK) >>
+				   IXGBE_ETS_DATA_LOC_SHIFT);
+
+		if (sensor_location != 0) {
+			status = hw->phy.ops.read_i2c_byte(hw,
+					ixgbe_emc_temp_data[sensor_index],
+					IXGBE_I2C_THERMAL_SENSOR_ADDR,
+					&data->sensor[i].temp);
+			if (status)
+				goto out;
+		}
+	}
+out:
+	return status;
+}
+
+/**
+ *  ixgbe_init_thermal_sensor_thresh_generic - Inits thermal sensor thresholds
+ *  @hw: pointer to hardware structure
+ *
+ *  Inits the thermal sensor thresholds according to the NVM map
+ *  and save off the threshold and location values into mac.thermal_sensor_data
+ **/
+s32 ixgbe_init_thermal_sensor_thresh_generic(struct ixgbe_hw *hw)
+{
+	s32 status = IXGBE_SUCCESS;
+	u16 offset;
+	u16 ets_offset;
+	u16 ets_cfg;
+	u16 ets_sensor;
+	u8  low_thresh_delta;
+	u8  num_sensors;
+	u8  sensor_index;
+	u8  sensor_location;
+	u8  therm_limit;
+	u8  i;
+	struct ixgbe_thermal_sensor_data *data = &hw->mac.thermal_sensor_data;
+
+	DEBUGFUNC("ixgbe_init_thermal_sensor_thresh_generic");
+
+	memset(data, 0, sizeof(struct ixgbe_thermal_sensor_data));
+
+	/* Only support thermal sensors attached to 82599 physical port 0 */
+	if ((hw->mac.type != ixgbe_mac_82599EB) ||
+	    (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1))
+		return IXGBE_NOT_IMPLEMENTED;
+
+	offset = IXGBE_ETS_CFG;
+	if (hw->eeprom.ops.read(hw, offset, &ets_offset))
+		goto eeprom_err;
+	if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF))
+		return IXGBE_NOT_IMPLEMENTED;
+
+	offset = ets_offset;
+	if (hw->eeprom.ops.read(hw, offset, &ets_cfg))
+		goto eeprom_err;
+	if (((ets_cfg & IXGBE_ETS_TYPE_MASK) >> IXGBE_ETS_TYPE_SHIFT)
+		!= IXGBE_ETS_TYPE_EMC)
+		return IXGBE_NOT_IMPLEMENTED;
+
+	low_thresh_delta = ((ets_cfg & IXGBE_ETS_LTHRES_DELTA_MASK) >>
+			     IXGBE_ETS_LTHRES_DELTA_SHIFT);
+	num_sensors = (ets_cfg & IXGBE_ETS_NUM_SENSORS_MASK);
+
+	for (i = 0; i < num_sensors; i++) {
+		offset = ets_offset + 1 + i;
+		if (hw->eeprom.ops.read(hw, offset, &ets_sensor)) {
+			ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+				      "eeprom read at offset %d failed",
+				      offset);
+			continue;
+		}
+		sensor_index = ((ets_sensor & IXGBE_ETS_DATA_INDEX_MASK) >>
+				IXGBE_ETS_DATA_INDEX_SHIFT);
+		sensor_location = ((ets_sensor & IXGBE_ETS_DATA_LOC_MASK) >>
+				   IXGBE_ETS_DATA_LOC_SHIFT);
+		therm_limit = ets_sensor & IXGBE_ETS_DATA_HTHRESH_MASK;
+
+		hw->phy.ops.write_i2c_byte(hw,
+			ixgbe_emc_therm_limit[sensor_index],
+			IXGBE_I2C_THERMAL_SENSOR_ADDR, therm_limit);
+
+		if ((i < IXGBE_MAX_SENSORS) && (sensor_location != 0)) {
+			data->sensor[i].location = sensor_location;
+			data->sensor[i].caution_thresh = therm_limit;
+			data->sensor[i].max_op_thresh = therm_limit -
+							low_thresh_delta;
+		}
+	}
+	return status;
+
+eeprom_err:
+	ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+		      "eeprom read at offset %d failed", offset);
+	return IXGBE_NOT_IMPLEMENTED;
+}
+
+
+/**
+ * ixgbe_dcb_get_rtrup2tc_generic - read rtrup2tc reg
+ * @hw: pointer to hardware structure
+ * @map: pointer to u8 arr for returning map
+ *
+ * Read the rtrup2tc HW register and resolve its content into map
+ **/
+void ixgbe_dcb_get_rtrup2tc_generic(struct ixgbe_hw *hw, u8 *map)
+{
+	u32 reg, i;
+
+	reg = IXGBE_READ_REG(hw, IXGBE_RTRUP2TC);
+	for (i = 0; i < IXGBE_DCB_MAX_USER_PRIORITY; i++)
+		map[i] = IXGBE_RTRUP2TC_UP_MASK &
+			(reg >> (i * IXGBE_RTRUP2TC_UP_SHIFT));
+	return;
+}
+
+void ixgbe_disable_rx_generic(struct ixgbe_hw *hw)
+{
+	u32 pfdtxgswc;
+	u32 rxctrl;
+
+	rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
+	if (rxctrl & IXGBE_RXCTRL_RXEN) {
+		if (hw->mac.type != ixgbe_mac_82598EB) {
+			pfdtxgswc = IXGBE_READ_REG(hw, IXGBE_PFDTXGSWC);
+			if (pfdtxgswc & IXGBE_PFDTXGSWC_VT_LBEN) {
+				pfdtxgswc &= ~IXGBE_PFDTXGSWC_VT_LBEN;
+				IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, pfdtxgswc);
+				hw->mac.set_lben = true;
+			} else {
+				hw->mac.set_lben = false;
+			}
+		}
+		rxctrl &= ~IXGBE_RXCTRL_RXEN;
+		IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl);
+	}
+}
+
+void ixgbe_enable_rx_generic(struct ixgbe_hw *hw)
+{
+	u32 pfdtxgswc;
+	u32 rxctrl;
+
+	rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
+	IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, (rxctrl | IXGBE_RXCTRL_RXEN));
+
+	if (hw->mac.type != ixgbe_mac_82598EB) {
+		if (hw->mac.set_lben) {
+			pfdtxgswc = IXGBE_READ_REG(hw, IXGBE_PFDTXGSWC);
+			pfdtxgswc |= IXGBE_PFDTXGSWC_VT_LBEN;
+			IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, pfdtxgswc);
+			hw->mac.set_lben = false;
+		}
+	}
+}
+
+/**
+ * ixgbe_mng_present - returns true when management capability is present
+ * @hw: pointer to hardware structure
+ */
+bool ixgbe_mng_present(struct ixgbe_hw *hw)
+{
+	u32 fwsm;
+
+	if (hw->mac.type < ixgbe_mac_82599EB)
+		return false;
+
+	fwsm = IXGBE_READ_REG(hw, IXGBE_FWSM_BY_MAC(hw));
+	fwsm &= IXGBE_FWSM_MODE_MASK;
+	return fwsm == IXGBE_FWSM_FW_MODE_PT;
+}
+
+/**
+ * ixgbe_mng_enabled - Is the manageability engine enabled?
+ * @hw: pointer to hardware structure
+ *
+ * Returns true if the manageability engine is enabled.
+ **/
+bool ixgbe_mng_enabled(struct ixgbe_hw *hw)
+{
+	u32 fwsm, manc, factps;
+
+	fwsm = IXGBE_READ_REG(hw, IXGBE_FWSM_BY_MAC(hw));
+	if ((fwsm & IXGBE_FWSM_MODE_MASK) != IXGBE_FWSM_FW_MODE_PT)
+		return false;
+
+	manc = IXGBE_READ_REG(hw, IXGBE_MANC);
+	if (!(manc & IXGBE_MANC_RCV_TCO_EN))
+		return false;
+
+	if (hw->mac.type <= ixgbe_mac_X540) {
+		factps = IXGBE_READ_REG(hw, IXGBE_FACTPS_BY_MAC(hw));
+		if (factps & IXGBE_FACTPS_MNGCG)
+			return false;
+	}
+
+	return true;
+}
+
+/**
+ *  ixgbe_setup_mac_link_multispeed_fiber - Set MAC link speed
+ *  @hw: pointer to hardware structure
+ *  @speed: new link speed
+ *  @autoneg_wait_to_complete: true when waiting for completion is needed
+ *
+ *  Set the link speed in the MAC and/or PHY register and restarts link.
+ **/
+s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
+					  ixgbe_link_speed speed,
+					  bool autoneg_wait_to_complete)
+{
+	ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN;
+	ixgbe_link_speed highest_link_speed = IXGBE_LINK_SPEED_UNKNOWN;
+	s32 status = IXGBE_SUCCESS;
+	u32 speedcnt = 0;
+	u32 i = 0;
+	bool autoneg, link_up = false;
+
+	DEBUGFUNC("ixgbe_setup_mac_link_multispeed_fiber");
+
+	/* Mask off requested but non-supported speeds */
+	status = ixgbe_get_link_capabilities(hw, &link_speed, &autoneg);
+	if (status != IXGBE_SUCCESS)
+		return status;
+
+	speed &= link_speed;
+
+	/* Try each speed one by one, highest priority first.  We do this in
+	 * software because 10Gb fiber doesn't support speed autonegotiation.
+	 */
+	if (speed & IXGBE_LINK_SPEED_10GB_FULL) {
+		speedcnt++;
+		highest_link_speed = IXGBE_LINK_SPEED_10GB_FULL;
+
+		/* If we already have link at this speed, just jump out */
+		status = ixgbe_check_link(hw, &link_speed, &link_up, false);
+		if (status != IXGBE_SUCCESS)
+			return status;
+
+		if ((link_speed == IXGBE_LINK_SPEED_10GB_FULL) && link_up)
+			goto out;
+
+		/* Set the module link speed */
+		switch (hw->phy.media_type) {
+		case ixgbe_media_type_fiber:
+			ixgbe_set_rate_select_speed(hw,
+						    IXGBE_LINK_SPEED_10GB_FULL);
+			break;
+		case ixgbe_media_type_fiber_qsfp:
+			/* QSFP module automatically detects MAC link speed */
+			break;
+		default:
+			DEBUGOUT("Unexpected media type.\n");
+			break;
+		}
+
+		/* Allow module to change analog characteristics (1G->10G) */
+		msec_delay(40);
+
+		status = ixgbe_setup_mac_link(hw,
+					      IXGBE_LINK_SPEED_10GB_FULL,
+					      autoneg_wait_to_complete);
+		if (status != IXGBE_SUCCESS)
+			return status;
+
+		/* Flap the Tx laser if it has not already been done */
+		ixgbe_flap_tx_laser(hw);
+
+		/* Wait for the controller to acquire link.  Per IEEE 802.3ap,
+		 * Section 73.10.2, we may have to wait up to 500ms if KR is
+		 * attempted.  82599 uses the same timing for 10g SFI.
+		 */
+		for (i = 0; i < 5; i++) {
+			/* Wait for the link partner to also set speed */
+			msec_delay(100);
+
+			/* If we have link, just jump out */
+			status = ixgbe_check_link(hw, &link_speed,
+						  &link_up, false);
+			if (status != IXGBE_SUCCESS)
+				return status;
+
+			if (link_up)
+				goto out;
+		}
+	}
+
+	if (speed & IXGBE_LINK_SPEED_1GB_FULL) {
+		speedcnt++;
+		if (highest_link_speed == IXGBE_LINK_SPEED_UNKNOWN)
+			highest_link_speed = IXGBE_LINK_SPEED_1GB_FULL;
+
+		/* If we already have link at this speed, just jump out */
+		status = ixgbe_check_link(hw, &link_speed, &link_up, false);
+		if (status != IXGBE_SUCCESS)
+			return status;
+
+		if ((link_speed == IXGBE_LINK_SPEED_1GB_FULL) && link_up)
+			goto out;
+
+		/* Set the module link speed */
+		switch (hw->phy.media_type) {
+		case ixgbe_media_type_fiber:
+			ixgbe_set_rate_select_speed(hw,
+						    IXGBE_LINK_SPEED_1GB_FULL);
+			break;
+		case ixgbe_media_type_fiber_qsfp:
+			/* QSFP module automatically detects link speed */
+			break;
+		default:
+			DEBUGOUT("Unexpected media type.\n");
+			break;
+		}
+
+		/* Allow module to change analog characteristics (10G->1G) */
+		msec_delay(40);
+
+		status = ixgbe_setup_mac_link(hw,
+					      IXGBE_LINK_SPEED_1GB_FULL,
+					      autoneg_wait_to_complete);
+		if (status != IXGBE_SUCCESS)
+			return status;
+
+		/* Flap the Tx laser if it has not already been done */
+		ixgbe_flap_tx_laser(hw);
+
+		/* Wait for the link partner to also set speed */
+		msec_delay(100);
+
+		/* If we have link, just jump out */
+		status = ixgbe_check_link(hw, &link_speed, &link_up, false);
+		if (status != IXGBE_SUCCESS)
+			return status;
+
+		if (link_up)
+			goto out;
+	}
+
+	/* We didn't get link.  Configure back to the highest speed we tried,
+	 * (if there was more than one).  We call ourselves back with just the
+	 * single highest speed that the user requested.
+	 */
+	if (speedcnt > 1)
+		status = ixgbe_setup_mac_link_multispeed_fiber(hw,
+						      highest_link_speed,
+						      autoneg_wait_to_complete);
+
+out:
+	/* Set autoneg_advertised value based on input link speed */
+	hw->phy.autoneg_advertised = 0;
+
+	if (speed & IXGBE_LINK_SPEED_10GB_FULL)
+		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
+
+	if (speed & IXGBE_LINK_SPEED_1GB_FULL)
+		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
+
+	return status;
+}
+
+/**
+ *  ixgbe_set_soft_rate_select_speed - Set module link speed
+ *  @hw: pointer to hardware structure
+ *  @speed: link speed to set
+ *
+ *  Set module link speed via the soft rate select.
+ */
+void ixgbe_set_soft_rate_select_speed(struct ixgbe_hw *hw,
+					ixgbe_link_speed speed)
+{
+	s32 status;
+	u8 rs, eeprom_data;
+
+	switch (speed) {
+	case IXGBE_LINK_SPEED_10GB_FULL:
+		/* one bit mask same as setting on */
+		rs = IXGBE_SFF_SOFT_RS_SELECT_10G;
+		break;
+	case IXGBE_LINK_SPEED_1GB_FULL:
+		rs = IXGBE_SFF_SOFT_RS_SELECT_1G;
+		break;
+	default:
+		DEBUGOUT("Invalid fixed module speed\n");
+		return;
+	}
+
+	/* Set RS0 */
+	status = hw->phy.ops.read_i2c_byte(hw, IXGBE_SFF_SFF_8472_OSCB,
+					   IXGBE_I2C_EEPROM_DEV_ADDR2,
+					   &eeprom_data);
+	if (status) {
+		DEBUGOUT("Failed to read Rx Rate Select RS0\n");
+		goto out;
+	}
+
+	eeprom_data = (eeprom_data & ~IXGBE_SFF_SOFT_RS_SELECT_MASK) | rs;
+
+	status = hw->phy.ops.write_i2c_byte(hw, IXGBE_SFF_SFF_8472_OSCB,
+					    IXGBE_I2C_EEPROM_DEV_ADDR2,
+					    eeprom_data);
+	if (status) {
+		DEBUGOUT("Failed to write Rx Rate Select RS0\n");
+		goto out;
+	}
+
+	/* Set RS1 */
+	status = hw->phy.ops.read_i2c_byte(hw, IXGBE_SFF_SFF_8472_ESCB,
+					   IXGBE_I2C_EEPROM_DEV_ADDR2,
+					   &eeprom_data);
+	if (status) {
+		DEBUGOUT("Failed to read Rx Rate Select RS1\n");
+		goto out;
+	}
+
+	eeprom_data = (eeprom_data & ~IXGBE_SFF_SOFT_RS_SELECT_MASK) | rs;
+
+	status = hw->phy.ops.write_i2c_byte(hw, IXGBE_SFF_SFF_8472_ESCB,
+					    IXGBE_I2C_EEPROM_DEV_ADDR2,
+					    eeprom_data);
+	if (status) {
+		DEBUGOUT("Failed to write Rx Rate Select RS1\n");
+		goto out;
+	}
+out:
+	return;
+}
diff --git a/drivers/net/ixgbe/base/ixgbe_common.h b/drivers/net/ixgbe/base/ixgbe_common.h
new file mode 100644
index 00000000..fd67a889
--- /dev/null
+++ b/drivers/net/ixgbe/base/ixgbe_common.h
@@ -0,0 +1,188 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+    this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in the
+    documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+    contributors may be used to endorse or promote products derived from
+    this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#ifndef _IXGBE_COMMON_H_
+#define _IXGBE_COMMON_H_
+
+#include "ixgbe_type.h"
+#define IXGBE_WRITE_REG64(hw, reg, value) \
+	do { \
+		IXGBE_WRITE_REG(hw, reg, (u32) value); \
+		IXGBE_WRITE_REG(hw, reg + 4, (u32) (value >> 32)); \
+	} while (0)
+#define IXGBE_REMOVED(a) (0)
+struct ixgbe_pba {
+	u16 word[2];
+	u16 *pba_block;
+};
+
+void ixgbe_dcb_get_rtrup2tc_generic(struct ixgbe_hw *hw, u8 *map);
+
+u16 ixgbe_get_pcie_msix_count_generic(struct ixgbe_hw *hw);
+s32 ixgbe_init_ops_generic(struct ixgbe_hw *hw);
+s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw);
+s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw);
+s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw);
+s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw);
+s32 ixgbe_read_pba_num_generic(struct ixgbe_hw *hw, u32 *pba_num);
+s32 ixgbe_read_pba_string_generic(struct ixgbe_hw *hw, u8 *pba_num,
+				  u32 pba_num_size);
+s32 ixgbe_read_pba_raw(struct ixgbe_hw *hw, u16 *eeprom_buf,
+		       u32 eeprom_buf_size, u16 max_pba_block_size,
+		       struct ixgbe_pba *pba);
+s32 ixgbe_write_pba_raw(struct ixgbe_hw *hw, u16 *eeprom_buf,
+			u32 eeprom_buf_size, struct ixgbe_pba *pba);
+s32 ixgbe_get_pba_block_size(struct ixgbe_hw *hw, u16 *eeprom_buf,
+			     u32 eeprom_buf_size, u16 *pba_block_size);
+s32 ixgbe_get_mac_addr_generic(struct ixgbe_hw *hw, u8 *mac_addr);
+s32 ixgbe_get_bus_info_generic(struct ixgbe_hw *hw);
+void ixgbe_set_pci_config_data_generic(struct ixgbe_hw *hw, u16 link_status);
+void ixgbe_set_lan_id_multi_port_pcie(struct ixgbe_hw *hw);
+s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw);
+
+s32 ixgbe_led_on_generic(struct ixgbe_hw *hw, u32 index);
+s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index);
+
+s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw);
+s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data);
+s32 ixgbe_write_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
+					       u16 words, u16 *data);
+s32 ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data);
+s32 ixgbe_read_eerd_buffer_generic(struct ixgbe_hw *hw, u16 offset,
+				   u16 words, u16 *data);
+s32 ixgbe_write_eewr_generic(struct ixgbe_hw *hw, u16 offset, u16 data);
+s32 ixgbe_write_eewr_buffer_generic(struct ixgbe_hw *hw, u16 offset,
+				    u16 words, u16 *data);
+s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
+				       u16 *data);
+s32 ixgbe_read_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
+					      u16 words, u16 *data);
+s32 ixgbe_calc_eeprom_checksum_generic(struct ixgbe_hw *hw);
+s32 ixgbe_validate_eeprom_checksum_generic(struct ixgbe_hw *hw,
+					   u16 *checksum_val);
+s32 ixgbe_update_eeprom_checksum_generic(struct ixgbe_hw *hw);
+s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg);
+
+s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
+			  u32 enable_addr);
+s32 ixgbe_clear_rar_generic(struct ixgbe_hw *hw, u32 index);
+s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw);
+s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw, u8 *mc_addr_list,
+				      u32 mc_addr_count,
+				      ixgbe_mc_addr_itr func, bool clear);
+s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw, u8 *addr_list,
+				      u32 addr_count, ixgbe_mc_addr_itr func);
+s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw);
+s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw);
+s32 ixgbe_enable_rx_dma_generic(struct ixgbe_hw *hw, u32 regval);
+s32 ixgbe_disable_sec_rx_path_generic(struct ixgbe_hw *hw);
+s32 ixgbe_enable_sec_rx_path_generic(struct ixgbe_hw *hw);
+
+s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw);
+bool ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw);
+void ixgbe_fc_autoneg(struct ixgbe_hw *hw);
+s32 ixgbe_setup_fc_generic(struct ixgbe_hw *hw);
+
+s32 ixgbe_validate_mac_addr(u8 *mac_addr);
+s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u32 mask);
+void ixgbe_release_swfw_sync(struct ixgbe_hw *hw, u32 mask);
+s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw);
+
+s32 prot_autoc_read_generic(struct ixgbe_hw *hw, bool *, u32 *reg_val);
+s32 prot_autoc_write_generic(struct ixgbe_hw *hw, u32 reg_val, bool locked);
+
+s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index);
+s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index);
+
+s32 ixgbe_get_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr);
+s32 ixgbe_set_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr);
+
+s32 ixgbe_set_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq);
+s32 ixgbe_set_vmdq_san_mac_generic(struct ixgbe_hw *hw, u32 vmdq);
+s32 ixgbe_clear_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq);
+s32 ixgbe_insert_mac_addr_generic(struct ixgbe_hw *hw, u8 *addr, u32 vmdq);
+s32 ixgbe_init_uta_tables_generic(struct ixgbe_hw *hw);
+s32 ixgbe_set_vfta_generic(struct ixgbe_hw *hw, u32 vlan,
+			 u32 vind, bool vlan_on);
+s32 ixgbe_set_vlvf_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind,
+			   bool vlan_on, bool *vfta_changed);
+s32 ixgbe_clear_vfta_generic(struct ixgbe_hw *hw);
+s32 ixgbe_find_vlvf_slot(struct ixgbe_hw *hw, u32 vlan);
+
+s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw,
+			       ixgbe_link_speed *speed,
+			       bool *link_up, bool link_up_wait_to_complete);
+
+s32 ixgbe_get_wwn_prefix_generic(struct ixgbe_hw *hw, u16 *wwnn_prefix,
+				 u16 *wwpn_prefix);
+
+s32 ixgbe_get_fcoe_boot_status_generic(struct ixgbe_hw *hw, u16 *bs);
+void ixgbe_set_mac_anti_spoofing(struct ixgbe_hw *hw, bool enable, int pf);
+void ixgbe_set_vlan_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf);
+s32 ixgbe_get_device_caps_generic(struct ixgbe_hw *hw, u16 *device_caps);
+void ixgbe_set_rxpba_generic(struct ixgbe_hw *hw, int num_pb, u32 headroom,
+			     int strategy);
+void ixgbe_enable_relaxed_ordering_gen2(struct ixgbe_hw *hw);
+s32 ixgbe_set_fw_drv_ver_generic(struct ixgbe_hw *hw, u8 maj, u8 min,
+				 u8 build, u8 ver);
+u8 ixgbe_calculate_checksum(u8 *buffer, u32 length);
+s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer,
+				 u32 length, u32 timeout, bool return_data);
+
+void ixgbe_clear_tx_pending(struct ixgbe_hw *hw);
+
+extern s32 ixgbe_reset_pipeline_82599(struct ixgbe_hw *hw);
+extern void ixgbe_stop_mac_link_on_d3_82599(struct ixgbe_hw *hw);
+bool ixgbe_mng_present(struct ixgbe_hw *hw);
+bool ixgbe_mng_enabled(struct ixgbe_hw *hw);
+
+#define IXGBE_I2C_THERMAL_SENSOR_ADDR	0xF8
+#define IXGBE_EMC_INTERNAL_DATA		0x00
+#define IXGBE_EMC_INTERNAL_THERM_LIMIT	0x20
+#define IXGBE_EMC_DIODE1_DATA		0x01
+#define IXGBE_EMC_DIODE1_THERM_LIMIT	0x19
+#define IXGBE_EMC_DIODE2_DATA		0x23
+#define IXGBE_EMC_DIODE2_THERM_LIMIT	0x1A
+#define IXGBE_EMC_DIODE3_DATA		0x2A
+#define IXGBE_EMC_DIODE3_THERM_LIMIT	0x30
+
+s32 ixgbe_get_thermal_sensor_data_generic(struct ixgbe_hw *hw);
+s32 ixgbe_init_thermal_sensor_thresh_generic(struct ixgbe_hw *hw);
+void ixgbe_disable_rx_generic(struct ixgbe_hw *hw);
+void ixgbe_enable_rx_generic(struct ixgbe_hw *hw);
+s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
+					  ixgbe_link_speed speed,
+					  bool autoneg_wait_to_complete);
+void ixgbe_set_soft_rate_select_speed(struct ixgbe_hw *hw,
+				      ixgbe_link_speed speed);
+#endif /* IXGBE_COMMON */
diff --git a/drivers/net/ixgbe/base/ixgbe_dcb.c b/drivers/net/ixgbe/base/ixgbe_dcb.c
new file mode 100644
index 00000000..9a6a5085
--- /dev/null
+++ b/drivers/net/ixgbe/base/ixgbe_dcb.c
@@ -0,0 +1,727 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+    this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in the
+    documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+    contributors may be used to endorse or promote products derived from
+    this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+
+#include "ixgbe_type.h"
+#include "ixgbe_dcb.h"
+#include "ixgbe_dcb_82598.h"
+#include "ixgbe_dcb_82599.h"
+
+/**
+ * ixgbe_dcb_calculate_tc_credits - This calculates the ieee traffic class
+ * credits from the configured bandwidth percentages. Credits
+ * are the smallest unit programmable into the underlying
+ * hardware. The IEEE 802.1Qaz specification do not use bandwidth
+ * groups so this is much simplified from the CEE case.
+ */
+s32 ixgbe_dcb_calculate_tc_credits(u8 *bw, u16 *refill, u16 *max,
+				   int max_frame_size)
+{
+	int min_percent = 100;
+	int min_credit, multiplier;
+	int i;
+
+	min_credit = ((max_frame_size / 2) + IXGBE_DCB_CREDIT_QUANTUM - 1) /
+			IXGBE_DCB_CREDIT_QUANTUM;
+
+	for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) {
+		if (bw[i] < min_percent && bw[i])
+			min_percent = bw[i];
+	}
+
+	multiplier = (min_credit / min_percent) + 1;
+
+	/* Find out the hw credits for each TC */
+	for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) {
+		int val = min(bw[i] * multiplier, IXGBE_DCB_MAX_CREDIT_REFILL);
+
+		if (val < min_credit)
+			val = min_credit;
+		refill[i] = (u16)val;
+
+		max[i] = bw[i] ? (bw[i]*IXGBE_DCB_MAX_CREDIT)/100 : min_credit;
+	}
+
+	return 0;
+}
+
+/**
+ * ixgbe_dcb_calculate_tc_credits_cee - Calculates traffic class credits
+ * @ixgbe_dcb_config: Struct containing DCB settings.
+ * @direction: Configuring either Tx or Rx.
+ *
+ * This function calculates the credits allocated to each traffic class.
+ * It should be called only after the rules are checked by
+ * ixgbe_dcb_check_config_cee().
+ */
+s32 ixgbe_dcb_calculate_tc_credits_cee(struct ixgbe_hw *hw,
+				   struct ixgbe_dcb_config *dcb_config,
+				   u32 max_frame_size, u8 direction)
+{
+	struct ixgbe_dcb_tc_path *p;
+	u32 min_multiplier	= 0;
+	u16 min_percent		= 100;
+	s32 ret_val =		IXGBE_SUCCESS;
+	/* Initialization values default for Tx settings */
+	u32 min_credit		= 0;
+	u32 credit_refill	= 0;
+	u32 credit_max		= 0;
+	u16 link_percentage	= 0;
+	u8  bw_percent		= 0;
+	u8  i;
+
+	if (dcb_config == NULL) {
+		ret_val = IXGBE_ERR_CONFIG;
+		goto out;
+	}
+
+	min_credit = ((max_frame_size / 2) + IXGBE_DCB_CREDIT_QUANTUM - 1) /
+		     IXGBE_DCB_CREDIT_QUANTUM;
+
+	/* Find smallest link percentage */
+	for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) {
+		p = &dcb_config->tc_config[i].path[direction];
+		bw_percent = dcb_config->bw_percentage[direction][p->bwg_id];
+		link_percentage = p->bwg_percent;
+
+		link_percentage = (link_percentage * bw_percent) / 100;
+
+		if (link_percentage && link_percentage < min_percent)
+			min_percent = link_percentage;
+	}
+
+	/*
+	 * The ratio between traffic classes will control the bandwidth
+	 * percentages seen on the wire. To calculate this ratio we use
+	 * a multiplier. It is required that the refill credits must be
+	 * larger than the max frame size so here we find the smallest
+	 * multiplier that will allow all bandwidth percentages to be
+	 * greater than the max frame size.
+	 */
+	min_multiplier = (min_credit / min_percent) + 1;
+
+	/* Find out the link percentage for each TC first */
+	for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) {
+		p = &dcb_config->tc_config[i].path[direction];
+		bw_percent = dcb_config->bw_percentage[direction][p->bwg_id];
+
+		link_percentage = p->bwg_percent;
+		/* Must be careful of integer division for very small nums */
+		link_percentage = (link_percentage * bw_percent) / 100;
+		if (p->bwg_percent > 0 && link_percentage == 0)
+			link_percentage = 1;
+
+		/* Save link_percentage for reference */
+		p->link_percent = (u8)link_percentage;
+
+		/* Calculate credit refill ratio using multiplier */
+		credit_refill = min(link_percentage * min_multiplier,
+				    (u32)IXGBE_DCB_MAX_CREDIT_REFILL);
+
+		/* Refill at least minimum credit */
+		if (credit_refill < min_credit)
+			credit_refill = min_credit;
+
+		p->data_credits_refill = (u16)credit_refill;
+
+		/* Calculate maximum credit for the TC */
+		credit_max = (link_percentage * IXGBE_DCB_MAX_CREDIT) / 100;
+
+		/*
+		 * Adjustment based on rule checking, if the percentage
+		 * of a TC is too small, the maximum credit may not be
+		 * enough to send out a jumbo frame in data plane arbitration.
+		 */
+		if (credit_max < min_credit)
+			credit_max = min_credit;
+
+		if (direction == IXGBE_DCB_TX_CONFIG) {
+			/*
+			 * Adjustment based on rule checking, if the
+			 * percentage of a TC is too small, the maximum
+			 * credit may not be enough to send out a TSO
+			 * packet in descriptor plane arbitration.
+			 */
+			if (credit_max && (credit_max <
+			    IXGBE_DCB_MIN_TSO_CREDIT)
+			    && (hw->mac.type == ixgbe_mac_82598EB))
+				credit_max = IXGBE_DCB_MIN_TSO_CREDIT;
+
+			dcb_config->tc_config[i].desc_credits_max =
+								(u16)credit_max;
+		}
+
+		p->data_credits_max = (u16)credit_max;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ * ixgbe_dcb_unpack_pfc_cee - Unpack dcb_config PFC info
+ * @cfg: dcb configuration to unpack into hardware consumable fields
+ * @map: user priority to traffic class map
+ * @pfc_up: u8 to store user priority PFC bitmask
+ *
+ * This unpacks the dcb configuration PFC info which is stored per
+ * traffic class into a 8bit user priority bitmask that can be
+ * consumed by hardware routines. The priority to tc map must be
+ * updated before calling this routine to use current up-to maps.
+ */
+void ixgbe_dcb_unpack_pfc_cee(struct ixgbe_dcb_config *cfg, u8 *map, u8 *pfc_up)
+{
+	struct ixgbe_dcb_tc_config *tc_config = &cfg->tc_config[0];
+	int up;
+
+	/*
+	 * If the TC for this user priority has PFC enabled then set the
+	 * matching bit in 'pfc_up' to reflect that PFC is enabled.
+	 */
+	for (*pfc_up = 0, up = 0; up < IXGBE_DCB_MAX_USER_PRIORITY; up++) {
+		if (tc_config[map[up]].pfc != ixgbe_dcb_pfc_disabled)
+			*pfc_up |= 1 << up;
+	}
+}
+
+void ixgbe_dcb_unpack_refill_cee(struct ixgbe_dcb_config *cfg, int direction,
+			     u16 *refill)
+{
+	struct ixgbe_dcb_tc_config *tc_config = &cfg->tc_config[0];
+	int tc;
+
+	for (tc = 0; tc < IXGBE_DCB_MAX_TRAFFIC_CLASS; tc++)
+		refill[tc] = tc_config[tc].path[direction].data_credits_refill;
+}
+
+void ixgbe_dcb_unpack_max_cee(struct ixgbe_dcb_config *cfg, u16 *max)
+{
+	struct ixgbe_dcb_tc_config *tc_config = &cfg->tc_config[0];
+	int tc;
+
+	for (tc = 0; tc < IXGBE_DCB_MAX_TRAFFIC_CLASS; tc++)
+		max[tc] = tc_config[tc].desc_credits_max;
+}
+
+void ixgbe_dcb_unpack_bwgid_cee(struct ixgbe_dcb_config *cfg, int direction,
+			    u8 *bwgid)
+{
+	struct ixgbe_dcb_tc_config *tc_config = &cfg->tc_config[0];
+	int tc;
+
+	for (tc = 0; tc < IXGBE_DCB_MAX_TRAFFIC_CLASS; tc++)
+		bwgid[tc] = tc_config[tc].path[direction].bwg_id;
+}
+
+void ixgbe_dcb_unpack_tsa_cee(struct ixgbe_dcb_config *cfg, int direction,
+			   u8 *tsa)
+{
+	struct ixgbe_dcb_tc_config *tc_config = &cfg->tc_config[0];
+	int tc;
+
+	for (tc = 0; tc < IXGBE_DCB_MAX_TRAFFIC_CLASS; tc++)
+		tsa[tc] = tc_config[tc].path[direction].tsa;
+}
+
+u8 ixgbe_dcb_get_tc_from_up(struct ixgbe_dcb_config *cfg, int direction, u8 up)
+{
+	struct ixgbe_dcb_tc_config *tc_config = &cfg->tc_config[0];
+	u8 prio_mask = 1 << up;
+	u8 tc = cfg->num_tcs.pg_tcs;
+
+	/* If tc is 0 then DCB is likely not enabled or supported */
+	if (!tc)
+		goto out;
+
+	/*
+	 * Test from maximum TC to 1 and report the first match we find.  If
+	 * we find no match we can assume that the TC is 0 since the TC must
+	 * be set for all user priorities
+	 */
+	for (tc--; tc; tc--) {
+		if (prio_mask & tc_config[tc].path[direction].up_to_tc_bitmap)
+			break;
+	}
+out:
+	return tc;
+}
+
+void ixgbe_dcb_unpack_map_cee(struct ixgbe_dcb_config *cfg, int direction,
+			      u8 *map)
+{
+	u8 up;
+
+	for (up = 0; up < IXGBE_DCB_MAX_USER_PRIORITY; up++)
+		map[up] = ixgbe_dcb_get_tc_from_up(cfg, direction, up);
+}
+
+/**
+ * ixgbe_dcb_config - Struct containing DCB settings.
+ * @dcb_config: Pointer to DCB config structure
+ *
+ * This function checks DCB rules for DCB settings.
+ * The following rules are checked:
+ * 1. The sum of bandwidth percentages of all Bandwidth Groups must total 100%.
+ * 2. The sum of bandwidth percentages of all Traffic Classes within a Bandwidth
+ *    Group must total 100.
+ * 3. A Traffic Class should not be set to both Link Strict Priority
+ *    and Group Strict Priority.
+ * 4. Link strict Bandwidth Groups can only have link strict traffic classes
+ *    with zero bandwidth.
+ */
+s32 ixgbe_dcb_check_config_cee(struct ixgbe_dcb_config *dcb_config)
+{
+	struct ixgbe_dcb_tc_path *p;
+	s32 ret_val = IXGBE_SUCCESS;
+	u8 i, j, bw = 0, bw_id;
+	u8 bw_sum[2][IXGBE_DCB_MAX_BW_GROUP];
+	bool link_strict[2][IXGBE_DCB_MAX_BW_GROUP];
+
+	memset(bw_sum, 0, sizeof(bw_sum));
+	memset(link_strict, 0, sizeof(link_strict));
+
+	/* First Tx, then Rx */
+	for (i = 0; i < 2; i++) {
+		/* Check each traffic class for rule violation */
+		for (j = 0; j < IXGBE_DCB_MAX_TRAFFIC_CLASS; j++) {
+			p = &dcb_config->tc_config[j].path[i];
+
+			bw = p->bwg_percent;
+			bw_id = p->bwg_id;
+
+			if (bw_id >= IXGBE_DCB_MAX_BW_GROUP) {
+				ret_val = IXGBE_ERR_CONFIG;
+				goto err_config;
+			}
+			if (p->tsa == ixgbe_dcb_tsa_strict) {
+				link_strict[i][bw_id] = true;
+				/* Link strict should have zero bandwidth */
+				if (bw) {
+					ret_val = IXGBE_ERR_CONFIG;
+					goto err_config;
+				}
+			} else if (!bw) {
+				/*
+				 * Traffic classes without link strict
+				 * should have non-zero bandwidth.
+				 */
+				ret_val = IXGBE_ERR_CONFIG;
+				goto err_config;
+			}
+			bw_sum[i][bw_id] += bw;
+		}
+
+		bw = 0;
+
+		/* Check each bandwidth group for rule violation */
+		for (j = 0; j < IXGBE_DCB_MAX_BW_GROUP; j++) {
+			bw += dcb_config->bw_percentage[i][j];
+			/*
+			 * Sum of bandwidth percentages of all traffic classes
+			 * within a Bandwidth Group must total 100 except for
+			 * link strict group (zero bandwidth).
+			 */
+			if (link_strict[i][j]) {
+				if (bw_sum[i][j]) {
+					/*
+					 * Link strict group should have zero
+					 * bandwidth.
+					 */
+					ret_val = IXGBE_ERR_CONFIG;
+					goto err_config;
+				}
+			} else if (bw_sum[i][j] != IXGBE_DCB_BW_PERCENT &&
+				   bw_sum[i][j] != 0) {
+				ret_val = IXGBE_ERR_CONFIG;
+				goto err_config;
+			}
+		}
+
+		if (bw != IXGBE_DCB_BW_PERCENT) {
+			ret_val = IXGBE_ERR_CONFIG;
+			goto err_config;
+		}
+	}
+
+err_config:
+
+	return ret_val;
+}
+
+/**
+ * ixgbe_dcb_get_tc_stats - Returns status of each traffic class
+ * @hw: pointer to hardware structure
+ * @stats: pointer to statistics structure
+ * @tc_count:  Number of elements in bwg_array.
+ *
+ * This function returns the status data for each of the Traffic Classes in use.
+ */
+s32 ixgbe_dcb_get_tc_stats(struct ixgbe_hw *hw, struct ixgbe_hw_stats *stats,
+			   u8 tc_count)
+{
+	s32 ret = IXGBE_NOT_IMPLEMENTED;
+	switch (hw->mac.type) {
+	case ixgbe_mac_82598EB:
+		ret = ixgbe_dcb_get_tc_stats_82598(hw, stats, tc_count);
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+	case ixgbe_mac_X550EM_a:
+		ret = ixgbe_dcb_get_tc_stats_82599(hw, stats, tc_count);
+		break;
+	default:
+		break;
+	}
+	return ret;
+}
+
+/**
+ * ixgbe_dcb_get_pfc_stats - Returns CBFC status of each traffic class
+ * @hw: pointer to hardware structure
+ * @stats: pointer to statistics structure
+ * @tc_count:  Number of elements in bwg_array.
+ *
+ * This function returns the CBFC status data for each of the Traffic Classes.
+ */
+s32 ixgbe_dcb_get_pfc_stats(struct ixgbe_hw *hw, struct ixgbe_hw_stats *stats,
+			    u8 tc_count)
+{
+	s32 ret = IXGBE_NOT_IMPLEMENTED;
+	switch (hw->mac.type) {
+	case ixgbe_mac_82598EB:
+		ret = ixgbe_dcb_get_pfc_stats_82598(hw, stats, tc_count);
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+	case ixgbe_mac_X550EM_a:
+		ret = ixgbe_dcb_get_pfc_stats_82599(hw, stats, tc_count);
+		break;
+	default:
+		break;
+	}
+	return ret;
+}
+
+/**
+ * ixgbe_dcb_config_rx_arbiter_cee - Config Rx arbiter
+ * @hw: pointer to hardware structure
+ * @dcb_config: pointer to ixgbe_dcb_config structure
+ *
+ * Configure Rx Data Arbiter and credits for each traffic class.
+ */
+s32 ixgbe_dcb_config_rx_arbiter_cee(struct ixgbe_hw *hw,
+				struct ixgbe_dcb_config *dcb_config)
+{
+	s32 ret = IXGBE_NOT_IMPLEMENTED;
+	u8 tsa[IXGBE_DCB_MAX_TRAFFIC_CLASS]	= { 0 };
+	u8 bwgid[IXGBE_DCB_MAX_TRAFFIC_CLASS]	= { 0 };
+	u8 map[IXGBE_DCB_MAX_USER_PRIORITY]	= { 0 };
+	u16 refill[IXGBE_DCB_MAX_TRAFFIC_CLASS]	= { 0 };
+	u16 max[IXGBE_DCB_MAX_TRAFFIC_CLASS]	= { 0 };
+
+	ixgbe_dcb_unpack_refill_cee(dcb_config, IXGBE_DCB_TX_CONFIG, refill);
+	ixgbe_dcb_unpack_max_cee(dcb_config, max);
+	ixgbe_dcb_unpack_bwgid_cee(dcb_config, IXGBE_DCB_TX_CONFIG, bwgid);
+	ixgbe_dcb_unpack_tsa_cee(dcb_config, IXGBE_DCB_TX_CONFIG, tsa);
+	ixgbe_dcb_unpack_map_cee(dcb_config, IXGBE_DCB_TX_CONFIG, map);
+
+	switch (hw->mac.type) {
+	case ixgbe_mac_82598EB:
+		ret = ixgbe_dcb_config_rx_arbiter_82598(hw, refill, max, tsa);
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+	case ixgbe_mac_X550EM_a:
+		ret = ixgbe_dcb_config_rx_arbiter_82599(hw, refill, max, bwgid,
+							tsa, map);
+		break;
+	default:
+		break;
+	}
+	return ret;
+}
+
+/**
+ * ixgbe_dcb_config_tx_desc_arbiter_cee - Config Tx Desc arbiter
+ * @hw: pointer to hardware structure
+ * @dcb_config: pointer to ixgbe_dcb_config structure
+ *
+ * Configure Tx Descriptor Arbiter and credits for each traffic class.
+ */
+s32 ixgbe_dcb_config_tx_desc_arbiter_cee(struct ixgbe_hw *hw,
+				     struct ixgbe_dcb_config *dcb_config)
+{
+	s32 ret = IXGBE_NOT_IMPLEMENTED;
+	u8 tsa[IXGBE_DCB_MAX_TRAFFIC_CLASS];
+	u8 bwgid[IXGBE_DCB_MAX_TRAFFIC_CLASS];
+	u16 refill[IXGBE_DCB_MAX_TRAFFIC_CLASS];
+	u16 max[IXGBE_DCB_MAX_TRAFFIC_CLASS];
+
+	ixgbe_dcb_unpack_refill_cee(dcb_config, IXGBE_DCB_TX_CONFIG, refill);
+	ixgbe_dcb_unpack_max_cee(dcb_config, max);
+	ixgbe_dcb_unpack_bwgid_cee(dcb_config, IXGBE_DCB_TX_CONFIG, bwgid);
+	ixgbe_dcb_unpack_tsa_cee(dcb_config, IXGBE_DCB_TX_CONFIG, tsa);
+
+	switch (hw->mac.type) {
+	case ixgbe_mac_82598EB:
+		ret = ixgbe_dcb_config_tx_desc_arbiter_82598(hw, refill, max,
+							     bwgid, tsa);
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+	case ixgbe_mac_X550EM_a:
+		ret = ixgbe_dcb_config_tx_desc_arbiter_82599(hw, refill, max,
+							     bwgid, tsa);
+		break;
+	default:
+		break;
+	}
+	return ret;
+}
+
+/**
+ * ixgbe_dcb_config_tx_data_arbiter_cee - Config Tx data arbiter
+ * @hw: pointer to hardware structure
+ * @dcb_config: pointer to ixgbe_dcb_config structure
+ *
+ * Configure Tx Data Arbiter and credits for each traffic class.
+ */
+s32 ixgbe_dcb_config_tx_data_arbiter_cee(struct ixgbe_hw *hw,
+				     struct ixgbe_dcb_config *dcb_config)
+{
+	s32 ret = IXGBE_NOT_IMPLEMENTED;
+	u8 tsa[IXGBE_DCB_MAX_TRAFFIC_CLASS];
+	u8 bwgid[IXGBE_DCB_MAX_TRAFFIC_CLASS];
+	u8 map[IXGBE_DCB_MAX_USER_PRIORITY] = { 0 };
+	u16 refill[IXGBE_DCB_MAX_TRAFFIC_CLASS];
+	u16 max[IXGBE_DCB_MAX_TRAFFIC_CLASS];
+
+	ixgbe_dcb_unpack_refill_cee(dcb_config, IXGBE_DCB_TX_CONFIG, refill);
+	ixgbe_dcb_unpack_max_cee(dcb_config, max);
+	ixgbe_dcb_unpack_bwgid_cee(dcb_config, IXGBE_DCB_TX_CONFIG, bwgid);
+	ixgbe_dcb_unpack_tsa_cee(dcb_config, IXGBE_DCB_TX_CONFIG, tsa);
+	ixgbe_dcb_unpack_map_cee(dcb_config, IXGBE_DCB_TX_CONFIG, map);
+
+	switch (hw->mac.type) {
+	case ixgbe_mac_82598EB:
+		ret = ixgbe_dcb_config_tx_data_arbiter_82598(hw, refill, max,
+							     bwgid, tsa);
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+	case ixgbe_mac_X550EM_a:
+		ret = ixgbe_dcb_config_tx_data_arbiter_82599(hw, refill, max,
+							     bwgid, tsa,
+							     map);
+		break;
+	default:
+		break;
+	}
+	return ret;
+}
+
+/**
+ * ixgbe_dcb_config_pfc_cee - Config priority flow control
+ * @hw: pointer to hardware structure
+ * @dcb_config: pointer to ixgbe_dcb_config structure
+ *
+ * Configure Priority Flow Control for each traffic class.
+ */
+s32 ixgbe_dcb_config_pfc_cee(struct ixgbe_hw *hw,
+			 struct ixgbe_dcb_config *dcb_config)
+{
+	s32 ret = IXGBE_NOT_IMPLEMENTED;
+	u8 pfc_en;
+	u8 map[IXGBE_DCB_MAX_USER_PRIORITY] = { 0 };
+
+	ixgbe_dcb_unpack_map_cee(dcb_config, IXGBE_DCB_TX_CONFIG, map);
+	ixgbe_dcb_unpack_pfc_cee(dcb_config, map, &pfc_en);
+
+	switch (hw->mac.type) {
+	case ixgbe_mac_82598EB:
+		ret = ixgbe_dcb_config_pfc_82598(hw, pfc_en);
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+	case ixgbe_mac_X550EM_a:
+		ret = ixgbe_dcb_config_pfc_82599(hw, pfc_en, map);
+		break;
+	default:
+		break;
+	}
+	return ret;
+}
+
+/**
+ * ixgbe_dcb_config_tc_stats - Config traffic class statistics
+ * @hw: pointer to hardware structure
+ *
+ * Configure queue statistics registers, all queues belonging to same traffic
+ * class uses a single set of queue statistics counters.
+ */
+s32 ixgbe_dcb_config_tc_stats(struct ixgbe_hw *hw)
+{
+	s32 ret = IXGBE_NOT_IMPLEMENTED;
+	switch (hw->mac.type) {
+	case ixgbe_mac_82598EB:
+		ret = ixgbe_dcb_config_tc_stats_82598(hw);
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+	case ixgbe_mac_X550EM_a:
+		ret = ixgbe_dcb_config_tc_stats_82599(hw, NULL);
+		break;
+	default:
+		break;
+	}
+	return ret;
+}
+
+/**
+ * ixgbe_dcb_hw_config_cee - Config and enable DCB
+ * @hw: pointer to hardware structure
+ * @dcb_config: pointer to ixgbe_dcb_config structure
+ *
+ * Configure dcb settings and enable dcb mode.
+ */
+s32 ixgbe_dcb_hw_config_cee(struct ixgbe_hw *hw,
+			struct ixgbe_dcb_config *dcb_config)
+{
+	s32 ret = IXGBE_NOT_IMPLEMENTED;
+	u8 pfc_en;
+	u8 tsa[IXGBE_DCB_MAX_TRAFFIC_CLASS];
+	u8 bwgid[IXGBE_DCB_MAX_TRAFFIC_CLASS];
+	u8 map[IXGBE_DCB_MAX_USER_PRIORITY] = { 0 };
+	u16 refill[IXGBE_DCB_MAX_TRAFFIC_CLASS];
+	u16 max[IXGBE_DCB_MAX_TRAFFIC_CLASS];
+
+	/* Unpack CEE standard containers */
+	ixgbe_dcb_unpack_refill_cee(dcb_config, IXGBE_DCB_TX_CONFIG, refill);
+	ixgbe_dcb_unpack_max_cee(dcb_config, max);
+	ixgbe_dcb_unpack_bwgid_cee(dcb_config, IXGBE_DCB_TX_CONFIG, bwgid);
+	ixgbe_dcb_unpack_tsa_cee(dcb_config, IXGBE_DCB_TX_CONFIG, tsa);
+	ixgbe_dcb_unpack_map_cee(dcb_config, IXGBE_DCB_TX_CONFIG, map);
+
+	switch (hw->mac.type) {
+	case ixgbe_mac_82598EB:
+		ret = ixgbe_dcb_hw_config_82598(hw, dcb_config->link_speed,
+						refill, max, bwgid, tsa);
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+	case ixgbe_mac_X550EM_a:
+		ixgbe_dcb_config_82599(hw, dcb_config);
+		ret = ixgbe_dcb_hw_config_82599(hw, dcb_config->link_speed,
+						refill, max, bwgid,
+						tsa, map);
+
+		ixgbe_dcb_config_tc_stats_82599(hw, dcb_config);
+		break;
+	default:
+		break;
+	}
+
+	if (!ret && dcb_config->pfc_mode_enable) {
+		ixgbe_dcb_unpack_pfc_cee(dcb_config, map, &pfc_en);
+		ret = ixgbe_dcb_config_pfc(hw, pfc_en, map);
+	}
+
+	return ret;
+}
+
+/* Helper routines to abstract HW specifics from DCB netlink ops */
+s32 ixgbe_dcb_config_pfc(struct ixgbe_hw *hw, u8 pfc_en, u8 *map)
+{
+	int ret = IXGBE_ERR_PARAM;
+
+	switch (hw->mac.type) {
+	case ixgbe_mac_82598EB:
+		ret = ixgbe_dcb_config_pfc_82598(hw, pfc_en);
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+	case ixgbe_mac_X550EM_a:
+		ret = ixgbe_dcb_config_pfc_82599(hw, pfc_en, map);
+		break;
+	default:
+		break;
+	}
+	return ret;
+}
+
+s32 ixgbe_dcb_hw_config(struct ixgbe_hw *hw, u16 *refill, u16 *max,
+			    u8 *bwg_id, u8 *tsa, u8 *map)
+{
+	switch (hw->mac.type) {
+	case ixgbe_mac_82598EB:
+		ixgbe_dcb_config_rx_arbiter_82598(hw, refill, max, tsa);
+		ixgbe_dcb_config_tx_desc_arbiter_82598(hw, refill, max, bwg_id,
+						       tsa);
+		ixgbe_dcb_config_tx_data_arbiter_82598(hw, refill, max, bwg_id,
+						       tsa);
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+	case ixgbe_mac_X550EM_a:
+		ixgbe_dcb_config_rx_arbiter_82599(hw, refill, max, bwg_id,
+						  tsa, map);
+		ixgbe_dcb_config_tx_desc_arbiter_82599(hw, refill, max, bwg_id,
+						       tsa);
+		ixgbe_dcb_config_tx_data_arbiter_82599(hw, refill, max, bwg_id,
+						       tsa, map);
+		break;
+	default:
+		break;
+	}
+	return 0;
+}
diff --git a/drivers/net/ixgbe/base/ixgbe_dcb.h b/drivers/net/ixgbe/base/ixgbe_dcb.h
new file mode 100644
index 00000000..41208049
--- /dev/null
+++ b/drivers/net/ixgbe/base/ixgbe_dcb.h
@@ -0,0 +1,174 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+    this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in the
+    documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+    contributors may be used to endorse or promote products derived from
+    this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#ifndef _IXGBE_DCB_H_
+#define _IXGBE_DCB_H_
+
+#include "ixgbe_type.h"
+
+/* DCB defines */
+/* DCB credit calculation defines */
+#define IXGBE_DCB_CREDIT_QUANTUM	64
+#define IXGBE_DCB_MAX_CREDIT_REFILL	200   /* 200 * 64B = 12800B */
+#define IXGBE_DCB_MAX_TSO_SIZE		(32 * 1024) /* Max TSO pkt size in DCB*/
+#define IXGBE_DCB_MAX_CREDIT		(2 * IXGBE_DCB_MAX_CREDIT_REFILL)
+
+/* 513 for 32KB TSO packet */
+#define IXGBE_DCB_MIN_TSO_CREDIT	\
+	((IXGBE_DCB_MAX_TSO_SIZE / IXGBE_DCB_CREDIT_QUANTUM) + 1)
+
+/* DCB configuration defines */
+#define IXGBE_DCB_MAX_USER_PRIORITY	8
+#define IXGBE_DCB_MAX_BW_GROUP		8
+#define IXGBE_DCB_BW_PERCENT		100
+
+#define IXGBE_DCB_TX_CONFIG		0
+#define IXGBE_DCB_RX_CONFIG		1
+
+/* DCB capability defines */
+#define IXGBE_DCB_PG_SUPPORT	0x00000001
+#define IXGBE_DCB_PFC_SUPPORT	0x00000002
+#define IXGBE_DCB_BCN_SUPPORT	0x00000004
+#define IXGBE_DCB_UP2TC_SUPPORT	0x00000008
+#define IXGBE_DCB_GSP_SUPPORT	0x00000010
+
+struct ixgbe_dcb_support {
+	u32 capabilities; /* DCB capabilities */
+
+	/* Each bit represents a number of TCs configurable in the hw.
+	 * If 8 traffic classes can be configured, the value is 0x80. */
+	u8 traffic_classes;
+	u8 pfc_traffic_classes;
+};
+
+enum ixgbe_dcb_tsa {
+	ixgbe_dcb_tsa_ets = 0,
+	ixgbe_dcb_tsa_group_strict_cee,
+	ixgbe_dcb_tsa_strict
+};
+
+/* Traffic class bandwidth allocation per direction */
+struct ixgbe_dcb_tc_path {
+	u8 bwg_id; /* Bandwidth Group (BWG) ID */
+	u8 bwg_percent; /* % of BWG's bandwidth */
+	u8 link_percent; /* % of link bandwidth */
+	u8 up_to_tc_bitmap; /* User Priority to Traffic Class mapping */
+	u16 data_credits_refill; /* Credit refill amount in 64B granularity */
+	u16 data_credits_max; /* Max credits for a configured packet buffer
+			       * in 64B granularity.*/
+	enum ixgbe_dcb_tsa tsa; /* Link or Group Strict Priority */
+};
+
+enum ixgbe_dcb_pfc {
+	ixgbe_dcb_pfc_disabled = 0,
+	ixgbe_dcb_pfc_enabled,
+	ixgbe_dcb_pfc_enabled_txonly,
+	ixgbe_dcb_pfc_enabled_rxonly
+};
+
+/* Traffic class configuration */
+struct ixgbe_dcb_tc_config {
+	struct ixgbe_dcb_tc_path path[2]; /* One each for Tx/Rx */
+	enum ixgbe_dcb_pfc pfc; /* Class based flow control setting */
+
+	u16 desc_credits_max; /* For Tx Descriptor arbitration */
+	u8 tc; /* Traffic class (TC) */
+};
+
+enum ixgbe_dcb_pba {
+	/* PBA[0-7] each use 64KB FIFO */
+	ixgbe_dcb_pba_equal = PBA_STRATEGY_EQUAL,
+	/* PBA[0-3] each use 80KB, PBA[4-7] each use 48KB */
+	ixgbe_dcb_pba_80_48 = PBA_STRATEGY_WEIGHTED
+};
+
+struct ixgbe_dcb_num_tcs {
+	u8 pg_tcs;
+	u8 pfc_tcs;
+};
+
+struct ixgbe_dcb_config {
+	struct ixgbe_dcb_tc_config tc_config[IXGBE_DCB_MAX_TRAFFIC_CLASS];
+	struct ixgbe_dcb_support support;
+	struct ixgbe_dcb_num_tcs num_tcs;
+	u8 bw_percentage[2][IXGBE_DCB_MAX_BW_GROUP]; /* One each for Tx/Rx */
+	bool pfc_mode_enable;
+	bool round_robin_enable;
+
+	enum ixgbe_dcb_pba rx_pba_cfg;
+
+	u32 dcb_cfg_version; /* Not used...OS-specific? */
+	u32 link_speed; /* For bandwidth allocation validation purpose */
+	bool vt_mode;
+};
+
+/* DCB driver APIs */
+
+/* DCB rule checking */
+s32 ixgbe_dcb_check_config_cee(struct ixgbe_dcb_config *);
+
+/* DCB credits calculation */
+s32 ixgbe_dcb_calculate_tc_credits(u8 *, u16 *, u16 *, int);
+s32 ixgbe_dcb_calculate_tc_credits_cee(struct ixgbe_hw *,
+				       struct ixgbe_dcb_config *, u32, u8);
+
+/* DCB PFC */
+s32 ixgbe_dcb_config_pfc(struct ixgbe_hw *, u8, u8 *);
+s32 ixgbe_dcb_config_pfc_cee(struct ixgbe_hw *, struct ixgbe_dcb_config *);
+
+/* DCB stats */
+s32 ixgbe_dcb_config_tc_stats(struct ixgbe_hw *);
+s32 ixgbe_dcb_get_tc_stats(struct ixgbe_hw *, struct ixgbe_hw_stats *, u8);
+s32 ixgbe_dcb_get_pfc_stats(struct ixgbe_hw *, struct ixgbe_hw_stats *, u8);
+
+/* DCB config arbiters */
+s32 ixgbe_dcb_config_tx_desc_arbiter_cee(struct ixgbe_hw *,
+					 struct ixgbe_dcb_config *);
+s32 ixgbe_dcb_config_tx_data_arbiter_cee(struct ixgbe_hw *,
+					 struct ixgbe_dcb_config *);
+s32 ixgbe_dcb_config_rx_arbiter_cee(struct ixgbe_hw *,
+				    struct ixgbe_dcb_config *);
+
+/* DCB unpack routines */
+void ixgbe_dcb_unpack_pfc_cee(struct ixgbe_dcb_config *, u8 *, u8 *);
+void ixgbe_dcb_unpack_refill_cee(struct ixgbe_dcb_config *, int, u16 *);
+void ixgbe_dcb_unpack_max_cee(struct ixgbe_dcb_config *, u16 *);
+void ixgbe_dcb_unpack_bwgid_cee(struct ixgbe_dcb_config *, int, u8 *);
+void ixgbe_dcb_unpack_tsa_cee(struct ixgbe_dcb_config *, int, u8 *);
+void ixgbe_dcb_unpack_map_cee(struct ixgbe_dcb_config *, int, u8 *);
+u8 ixgbe_dcb_get_tc_from_up(struct ixgbe_dcb_config *, int, u8);
+
+/* DCB initialization */
+s32 ixgbe_dcb_hw_config(struct ixgbe_hw *, u16 *, u16 *, u8 *, u8 *, u8 *);
+s32 ixgbe_dcb_hw_config_cee(struct ixgbe_hw *, struct ixgbe_dcb_config *);
+#endif /* _IXGBE_DCB_H_ */
diff --git a/drivers/net/ixgbe/base/ixgbe_dcb_82598.c b/drivers/net/ixgbe/base/ixgbe_dcb_82598.c
new file mode 100644
index 00000000..7ff7beb4
--- /dev/null
+++ b/drivers/net/ixgbe/base/ixgbe_dcb_82598.c
@@ -0,0 +1,360 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+    this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in the
+    documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+    contributors may be used to endorse or promote products derived from
+    this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+
+#include "ixgbe_type.h"
+#include "ixgbe_dcb.h"
+#include "ixgbe_dcb_82598.h"
+
+/**
+ * ixgbe_dcb_get_tc_stats_82598 - Return status data for each traffic class
+ * @hw: pointer to hardware structure
+ * @stats: pointer to statistics structure
+ * @tc_count:  Number of elements in bwg_array.
+ *
+ * This function returns the status data for each of the Traffic Classes in use.
+ */
+s32 ixgbe_dcb_get_tc_stats_82598(struct ixgbe_hw *hw,
+				 struct ixgbe_hw_stats *stats,
+				 u8 tc_count)
+{
+	int tc;
+
+	DEBUGFUNC("dcb_get_tc_stats");
+
+	if (tc_count > IXGBE_DCB_MAX_TRAFFIC_CLASS)
+		return IXGBE_ERR_PARAM;
+
+	/* Statistics pertaining to each traffic class */
+	for (tc = 0; tc < tc_count; tc++) {
+		/* Transmitted Packets */
+		stats->qptc[tc] += IXGBE_READ_REG(hw, IXGBE_QPTC(tc));
+		/* Transmitted Bytes */
+		stats->qbtc[tc] += IXGBE_READ_REG(hw, IXGBE_QBTC(tc));
+		/* Received Packets */
+		stats->qprc[tc] += IXGBE_READ_REG(hw, IXGBE_QPRC(tc));
+		/* Received Bytes */
+		stats->qbrc[tc] += IXGBE_READ_REG(hw, IXGBE_QBRC(tc));
+
+#if 0
+		/* Can we get rid of these??  Consequently, getting rid
+		 * of the tc_stats structure.
+		 */
+		tc_stats_array[up]->in_overflow_discards = 0;
+		tc_stats_array[up]->out_overflow_discards = 0;
+#endif
+	}
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_dcb_get_pfc_stats_82598 - Returns CBFC status data
+ * @hw: pointer to hardware structure
+ * @stats: pointer to statistics structure
+ * @tc_count:  Number of elements in bwg_array.
+ *
+ * This function returns the CBFC status data for each of the Traffic Classes.
+ */
+s32 ixgbe_dcb_get_pfc_stats_82598(struct ixgbe_hw *hw,
+				  struct ixgbe_hw_stats *stats,
+				  u8 tc_count)
+{
+	int tc;
+
+	DEBUGFUNC("dcb_get_pfc_stats");
+
+	if (tc_count > IXGBE_DCB_MAX_TRAFFIC_CLASS)
+		return IXGBE_ERR_PARAM;
+
+	for (tc = 0; tc < tc_count; tc++) {
+		/* Priority XOFF Transmitted */
+		stats->pxofftxc[tc] += IXGBE_READ_REG(hw, IXGBE_PXOFFTXC(tc));
+		/* Priority XOFF Received */
+		stats->pxoffrxc[tc] += IXGBE_READ_REG(hw, IXGBE_PXOFFRXC(tc));
+	}
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_dcb_config_rx_arbiter_82598 - Config Rx data arbiter
+ * @hw: pointer to hardware structure
+ * @dcb_config: pointer to ixgbe_dcb_config structure
+ *
+ * Configure Rx Data Arbiter and credits for each traffic class.
+ */
+s32 ixgbe_dcb_config_rx_arbiter_82598(struct ixgbe_hw *hw, u16 *refill,
+				      u16 *max, u8 *tsa)
+{
+	u32 reg = 0;
+	u32 credit_refill = 0;
+	u32 credit_max = 0;
+	u8 i = 0;
+
+	reg = IXGBE_READ_REG(hw, IXGBE_RUPPBMR) | IXGBE_RUPPBMR_MQA;
+	IXGBE_WRITE_REG(hw, IXGBE_RUPPBMR, reg);
+
+	reg = IXGBE_READ_REG(hw, IXGBE_RMCS);
+	/* Enable Arbiter */
+	reg &= ~IXGBE_RMCS_ARBDIS;
+	/* Enable Receive Recycle within the BWG */
+	reg |= IXGBE_RMCS_RRM;
+	/* Enable Deficit Fixed Priority arbitration*/
+	reg |= IXGBE_RMCS_DFP;
+
+	IXGBE_WRITE_REG(hw, IXGBE_RMCS, reg);
+
+	/* Configure traffic class credits and priority */
+	for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) {
+		credit_refill = refill[i];
+		credit_max = max[i];
+
+		reg = credit_refill | (credit_max << IXGBE_RT2CR_MCL_SHIFT);
+
+		if (tsa[i] == ixgbe_dcb_tsa_strict)
+			reg |= IXGBE_RT2CR_LSP;
+
+		IXGBE_WRITE_REG(hw, IXGBE_RT2CR(i), reg);
+	}
+
+	reg = IXGBE_READ_REG(hw, IXGBE_RDRXCTL);
+	reg |= IXGBE_RDRXCTL_RDMTS_1_2;
+	reg |= IXGBE_RDRXCTL_MPBEN;
+	reg |= IXGBE_RDRXCTL_MCEN;
+	IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, reg);
+
+	reg = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
+	/* Make sure there is enough descriptors before arbitration */
+	reg &= ~IXGBE_RXCTRL_DMBYPS;
+	IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, reg);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_dcb_config_tx_desc_arbiter_82598 - Config Tx Desc. arbiter
+ * @hw: pointer to hardware structure
+ * @dcb_config: pointer to ixgbe_dcb_config structure
+ *
+ * Configure Tx Descriptor Arbiter and credits for each traffic class.
+ */
+s32 ixgbe_dcb_config_tx_desc_arbiter_82598(struct ixgbe_hw *hw,
+					   u16 *refill, u16 *max, u8 *bwg_id,
+					   u8 *tsa)
+{
+	u32 reg, max_credits;
+	u8 i;
+
+	reg = IXGBE_READ_REG(hw, IXGBE_DPMCS);
+
+	/* Enable arbiter */
+	reg &= ~IXGBE_DPMCS_ARBDIS;
+	reg |= IXGBE_DPMCS_TSOEF;
+
+	/* Configure Max TSO packet size 34KB including payload and headers */
+	reg |= (0x4 << IXGBE_DPMCS_MTSOS_SHIFT);
+
+	IXGBE_WRITE_REG(hw, IXGBE_DPMCS, reg);
+
+	/* Configure traffic class credits and priority */
+	for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) {
+		max_credits = max[i];
+		reg = max_credits << IXGBE_TDTQ2TCCR_MCL_SHIFT;
+		reg |= refill[i];
+		reg |= (u32)(bwg_id[i]) << IXGBE_TDTQ2TCCR_BWG_SHIFT;
+
+		if (tsa[i] == ixgbe_dcb_tsa_group_strict_cee)
+			reg |= IXGBE_TDTQ2TCCR_GSP;
+
+		if (tsa[i] == ixgbe_dcb_tsa_strict)
+			reg |= IXGBE_TDTQ2TCCR_LSP;
+
+		IXGBE_WRITE_REG(hw, IXGBE_TDTQ2TCCR(i), reg);
+	}
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_dcb_config_tx_data_arbiter_82598 - Config Tx data arbiter
+ * @hw: pointer to hardware structure
+ * @dcb_config: pointer to ixgbe_dcb_config structure
+ *
+ * Configure Tx Data Arbiter and credits for each traffic class.
+ */
+s32 ixgbe_dcb_config_tx_data_arbiter_82598(struct ixgbe_hw *hw,
+					   u16 *refill, u16 *max, u8 *bwg_id,
+					   u8 *tsa)
+{
+	u32 reg;
+	u8 i;
+
+	reg = IXGBE_READ_REG(hw, IXGBE_PDPMCS);
+	/* Enable Data Plane Arbiter */
+	reg &= ~IXGBE_PDPMCS_ARBDIS;
+	/* Enable DFP and Transmit Recycle Mode */
+	reg |= (IXGBE_PDPMCS_TPPAC | IXGBE_PDPMCS_TRM);
+
+	IXGBE_WRITE_REG(hw, IXGBE_PDPMCS, reg);
+
+	/* Configure traffic class credits and priority */
+	for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) {
+		reg = refill[i];
+		reg |= (u32)(max[i]) << IXGBE_TDPT2TCCR_MCL_SHIFT;
+		reg |= (u32)(bwg_id[i]) << IXGBE_TDPT2TCCR_BWG_SHIFT;
+
+		if (tsa[i] == ixgbe_dcb_tsa_group_strict_cee)
+			reg |= IXGBE_TDPT2TCCR_GSP;
+
+		if (tsa[i] == ixgbe_dcb_tsa_strict)
+			reg |= IXGBE_TDPT2TCCR_LSP;
+
+		IXGBE_WRITE_REG(hw, IXGBE_TDPT2TCCR(i), reg);
+	}
+
+	/* Enable Tx packet buffer division */
+	reg = IXGBE_READ_REG(hw, IXGBE_DTXCTL);
+	reg |= IXGBE_DTXCTL_ENDBUBD;
+	IXGBE_WRITE_REG(hw, IXGBE_DTXCTL, reg);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_dcb_config_pfc_82598 - Config priority flow control
+ * @hw: pointer to hardware structure
+ * @dcb_config: pointer to ixgbe_dcb_config structure
+ *
+ * Configure Priority Flow Control for each traffic class.
+ */
+s32 ixgbe_dcb_config_pfc_82598(struct ixgbe_hw *hw, u8 pfc_en)
+{
+	u32 fcrtl, reg;
+	u8 i;
+
+	/* Enable Transmit Priority Flow Control */
+	reg = IXGBE_READ_REG(hw, IXGBE_RMCS);
+	reg &= ~IXGBE_RMCS_TFCE_802_3X;
+	reg |= IXGBE_RMCS_TFCE_PRIORITY;
+	IXGBE_WRITE_REG(hw, IXGBE_RMCS, reg);
+
+	/* Enable Receive Priority Flow Control */
+	reg = IXGBE_READ_REG(hw, IXGBE_FCTRL);
+	reg &= ~(IXGBE_FCTRL_RPFCE | IXGBE_FCTRL_RFCE);
+
+	if (pfc_en)
+		reg |= IXGBE_FCTRL_RPFCE;
+
+	IXGBE_WRITE_REG(hw, IXGBE_FCTRL, reg);
+
+	/* Configure PFC Tx thresholds per TC */
+	for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) {
+		if (!(pfc_en & (1 << i))) {
+			IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), 0);
+			IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), 0);
+			continue;
+		}
+
+		fcrtl = (hw->fc.low_water[i] << 10) | IXGBE_FCRTL_XONE;
+		reg = (hw->fc.high_water[i] << 10) | IXGBE_FCRTH_FCEN;
+		IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), fcrtl);
+		IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), reg);
+	}
+
+	/* Configure pause time */
+	reg = hw->fc.pause_time | (hw->fc.pause_time << 16);
+	for (i = 0; i < (IXGBE_DCB_MAX_TRAFFIC_CLASS / 2); i++)
+		IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), reg);
+
+	/* Configure flow control refresh threshold value */
+	IXGBE_WRITE_REG(hw, IXGBE_FCRTV, hw->fc.pause_time / 2);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_dcb_config_tc_stats_82598 - Configure traffic class statistics
+ * @hw: pointer to hardware structure
+ *
+ * Configure queue statistics registers, all queues belonging to same traffic
+ * class uses a single set of queue statistics counters.
+ */
+s32 ixgbe_dcb_config_tc_stats_82598(struct ixgbe_hw *hw)
+{
+	u32 reg = 0;
+	u8 i = 0;
+	u8 j = 0;
+
+	/* Receive Queues stats setting -  8 queues per statistics reg */
+	for (i = 0, j = 0; i < 15 && j < 8; i = i + 2, j++) {
+		reg = IXGBE_READ_REG(hw, IXGBE_RQSMR(i));
+		reg |= ((0x1010101) * j);
+		IXGBE_WRITE_REG(hw, IXGBE_RQSMR(i), reg);
+		reg = IXGBE_READ_REG(hw, IXGBE_RQSMR(i + 1));
+		reg |= ((0x1010101) * j);
+		IXGBE_WRITE_REG(hw, IXGBE_RQSMR(i + 1), reg);
+	}
+	/* Transmit Queues stats setting -  4 queues per statistics reg*/
+	for (i = 0; i < 8; i++) {
+		reg = IXGBE_READ_REG(hw, IXGBE_TQSMR(i));
+		reg |= ((0x1010101) * i);
+		IXGBE_WRITE_REG(hw, IXGBE_TQSMR(i), reg);
+	}
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_dcb_hw_config_82598 - Config and enable DCB
+ * @hw: pointer to hardware structure
+ * @dcb_config: pointer to ixgbe_dcb_config structure
+ *
+ * Configure dcb settings and enable dcb mode.
+ */
+s32 ixgbe_dcb_hw_config_82598(struct ixgbe_hw *hw, int link_speed,
+			      u16 *refill, u16 *max, u8 *bwg_id,
+			      u8 *tsa)
+{
+	UNREFERENCED_1PARAMETER(link_speed);
+
+	ixgbe_dcb_config_rx_arbiter_82598(hw, refill, max, tsa);
+	ixgbe_dcb_config_tx_desc_arbiter_82598(hw, refill, max, bwg_id,
+					       tsa);
+	ixgbe_dcb_config_tx_data_arbiter_82598(hw, refill, max, bwg_id,
+					       tsa);
+	ixgbe_dcb_config_tc_stats_82598(hw);
+
+
+	return IXGBE_SUCCESS;
+}
diff --git a/drivers/net/ixgbe/base/ixgbe_dcb_82598.h b/drivers/net/ixgbe/base/ixgbe_dcb_82598.h
new file mode 100644
index 00000000..eb88b3d3
--- /dev/null
+++ b/drivers/net/ixgbe/base/ixgbe_dcb_82598.h
@@ -0,0 +1,99 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+    this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in the
+    documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+    contributors may be used to endorse or promote products derived from
+    this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#ifndef _IXGBE_DCB_82598_H_
+#define _IXGBE_DCB_82598_H_
+
+/* DCB register definitions */
+
+#define IXGBE_DPMCS_MTSOS_SHIFT	16
+#define IXGBE_DPMCS_TDPAC	0x00000001 /* 0 Round Robin,
+					    * 1 DFP - Deficit Fixed Priority */
+#define IXGBE_DPMCS_TRM		0x00000010 /* Transmit Recycle Mode */
+#define IXGBE_DPMCS_ARBDIS	0x00000040 /* DCB arbiter disable */
+#define IXGBE_DPMCS_TSOEF	0x00080000 /* TSO Expand Factor: 0=x4, 1=x2 */
+
+#define IXGBE_RUPPBMR_MQA	0x80000000 /* Enable UP to queue mapping */
+
+#define IXGBE_RT2CR_MCL_SHIFT	12 /* Offset to Max Credit Limit setting */
+#define IXGBE_RT2CR_LSP		0x80000000 /* LSP enable bit */
+
+#define IXGBE_RDRXCTL_MPBEN	0x00000010 /* DMA config for multiple packet
+					    * buffers enable */
+#define IXGBE_RDRXCTL_MCEN	0x00000040 /* DMA config for multiple cores
+					    * (RSS) enable */
+
+#define IXGBE_TDTQ2TCCR_MCL_SHIFT	12
+#define IXGBE_TDTQ2TCCR_BWG_SHIFT	9
+#define IXGBE_TDTQ2TCCR_GSP	0x40000000
+#define IXGBE_TDTQ2TCCR_LSP	0x80000000
+
+#define IXGBE_TDPT2TCCR_MCL_SHIFT	12
+#define IXGBE_TDPT2TCCR_BWG_SHIFT	9
+#define IXGBE_TDPT2TCCR_GSP	0x40000000
+#define IXGBE_TDPT2TCCR_LSP	0x80000000
+
+#define IXGBE_PDPMCS_TPPAC	0x00000020 /* 0 Round Robin,
+					    * 1 DFP - Deficit Fixed Priority */
+#define IXGBE_PDPMCS_ARBDIS	0x00000040 /* Arbiter disable */
+#define IXGBE_PDPMCS_TRM	0x00000100 /* Transmit Recycle Mode enable */
+
+#define IXGBE_DTXCTL_ENDBUBD	0x00000004 /* Enable DBU buffer division */
+
+#define IXGBE_TXPBSIZE_40KB	0x0000A000 /* 40KB Packet Buffer */
+#define IXGBE_RXPBSIZE_48KB	0x0000C000 /* 48KB Packet Buffer */
+#define IXGBE_RXPBSIZE_64KB	0x00010000 /* 64KB Packet Buffer */
+#define IXGBE_RXPBSIZE_80KB	0x00014000 /* 80KB Packet Buffer */
+
+/* DCB driver APIs */
+
+/* DCB PFC */
+s32 ixgbe_dcb_config_pfc_82598(struct ixgbe_hw *, u8);
+
+/* DCB stats */
+s32 ixgbe_dcb_config_tc_stats_82598(struct ixgbe_hw *);
+s32 ixgbe_dcb_get_tc_stats_82598(struct ixgbe_hw *,
+				 struct ixgbe_hw_stats *, u8);
+s32 ixgbe_dcb_get_pfc_stats_82598(struct ixgbe_hw *,
+				  struct ixgbe_hw_stats *, u8);
+
+/* DCB config arbiters */
+s32 ixgbe_dcb_config_tx_desc_arbiter_82598(struct ixgbe_hw *, u16 *, u16 *,
+					   u8 *, u8 *);
+s32 ixgbe_dcb_config_tx_data_arbiter_82598(struct ixgbe_hw *, u16 *, u16 *,
+					   u8 *, u8 *);
+s32 ixgbe_dcb_config_rx_arbiter_82598(struct ixgbe_hw *, u16 *, u16 *, u8 *);
+
+/* DCB initialization */
+s32 ixgbe_dcb_hw_config_82598(struct ixgbe_hw *, int, u16 *, u16 *, u8 *, u8 *);
+#endif /* _IXGBE_DCB_82958_H_ */
diff --git a/drivers/net/ixgbe/base/ixgbe_dcb_82599.c b/drivers/net/ixgbe/base/ixgbe_dcb_82599.c
new file mode 100644
index 00000000..a52f83a0
--- /dev/null
+++ b/drivers/net/ixgbe/base/ixgbe_dcb_82599.c
@@ -0,0 +1,593 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+    this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in the
+    documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+    contributors may be used to endorse or promote products derived from
+    this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+
+#include "ixgbe_type.h"
+#include "ixgbe_dcb.h"
+#include "ixgbe_dcb_82599.h"
+
+/**
+ * ixgbe_dcb_get_tc_stats_82599 - Returns status for each traffic class
+ * @hw: pointer to hardware structure
+ * @stats: pointer to statistics structure
+ * @tc_count:  Number of elements in bwg_array.
+ *
+ * This function returns the status data for each of the Traffic Classes in use.
+ */
+s32 ixgbe_dcb_get_tc_stats_82599(struct ixgbe_hw *hw,
+				 struct ixgbe_hw_stats *stats,
+				 u8 tc_count)
+{
+	int tc;
+
+	DEBUGFUNC("dcb_get_tc_stats");
+
+	if (tc_count > IXGBE_DCB_MAX_TRAFFIC_CLASS)
+		return IXGBE_ERR_PARAM;
+
+	/* Statistics pertaining to each traffic class */
+	for (tc = 0; tc < tc_count; tc++) {
+		/* Transmitted Packets */
+		stats->qptc[tc] += IXGBE_READ_REG(hw, IXGBE_QPTC(tc));
+		/* Transmitted Bytes (read low first to prevent missed carry) */
+		stats->qbtc[tc] += IXGBE_READ_REG(hw, IXGBE_QBTC_L(tc));
+		stats->qbtc[tc] +=
+			(((u64)(IXGBE_READ_REG(hw, IXGBE_QBTC_H(tc)))) << 32);
+		/* Received Packets */
+		stats->qprc[tc] += IXGBE_READ_REG(hw, IXGBE_QPRC(tc));
+		/* Received Bytes (read low first to prevent missed carry) */
+		stats->qbrc[tc] += IXGBE_READ_REG(hw, IXGBE_QBRC_L(tc));
+		stats->qbrc[tc] +=
+			(((u64)(IXGBE_READ_REG(hw, IXGBE_QBRC_H(tc)))) << 32);
+
+		/* Received Dropped Packet */
+		stats->qprdc[tc] += IXGBE_READ_REG(hw, IXGBE_QPRDC(tc));
+	}
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_dcb_get_pfc_stats_82599 - Return CBFC status data
+ * @hw: pointer to hardware structure
+ * @stats: pointer to statistics structure
+ * @tc_count:  Number of elements in bwg_array.
+ *
+ * This function returns the CBFC status data for each of the Traffic Classes.
+ */
+s32 ixgbe_dcb_get_pfc_stats_82599(struct ixgbe_hw *hw,
+				  struct ixgbe_hw_stats *stats,
+				  u8 tc_count)
+{
+	int tc;
+
+	DEBUGFUNC("dcb_get_pfc_stats");
+
+	if (tc_count > IXGBE_DCB_MAX_TRAFFIC_CLASS)
+		return IXGBE_ERR_PARAM;
+
+	for (tc = 0; tc < tc_count; tc++) {
+		/* Priority XOFF Transmitted */
+		stats->pxofftxc[tc] += IXGBE_READ_REG(hw, IXGBE_PXOFFTXC(tc));
+		/* Priority XOFF Received */
+		stats->pxoffrxc[tc] += IXGBE_READ_REG(hw, IXGBE_PXOFFRXCNT(tc));
+	}
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_dcb_config_rx_arbiter_82599 - Config Rx Data arbiter
+ * @hw: pointer to hardware structure
+ * @dcb_config: pointer to ixgbe_dcb_config structure
+ *
+ * Configure Rx Packet Arbiter and credits for each traffic class.
+ */
+s32 ixgbe_dcb_config_rx_arbiter_82599(struct ixgbe_hw *hw, u16 *refill,
+				      u16 *max, u8 *bwg_id, u8 *tsa,
+				      u8 *map)
+{
+	u32 reg = 0;
+	u32 credit_refill = 0;
+	u32 credit_max = 0;
+	u8  i = 0;
+
+	/*
+	 * Disable the arbiter before changing parameters
+	 * (always enable recycle mode; WSP)
+	 */
+	reg = IXGBE_RTRPCS_RRM | IXGBE_RTRPCS_RAC | IXGBE_RTRPCS_ARBDIS;
+	IXGBE_WRITE_REG(hw, IXGBE_RTRPCS, reg);
+
+	/*
+	 * map all UPs to TCs. up_to_tc_bitmap for each TC has corresponding
+	 * bits sets for the UPs that needs to be mappped to that TC.
+	 * e.g if priorities 6 and 7 are to be mapped to a TC then the
+	 * up_to_tc_bitmap value for that TC will be 11000000 in binary.
+	 */
+	reg = 0;
+	for (i = 0; i < IXGBE_DCB_MAX_USER_PRIORITY; i++)
+		reg |= (map[i] << (i * IXGBE_RTRUP2TC_UP_SHIFT));
+
+	IXGBE_WRITE_REG(hw, IXGBE_RTRUP2TC, reg);
+
+	/* Configure traffic class credits and priority */
+	for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) {
+		credit_refill = refill[i];
+		credit_max = max[i];
+		reg = credit_refill | (credit_max << IXGBE_RTRPT4C_MCL_SHIFT);
+
+		reg |= (u32)(bwg_id[i]) << IXGBE_RTRPT4C_BWG_SHIFT;
+
+		if (tsa[i] == ixgbe_dcb_tsa_strict)
+			reg |= IXGBE_RTRPT4C_LSP;
+
+		IXGBE_WRITE_REG(hw, IXGBE_RTRPT4C(i), reg);
+	}
+
+	/*
+	 * Configure Rx packet plane (recycle mode; WSP) and
+	 * enable arbiter
+	 */
+	reg = IXGBE_RTRPCS_RRM | IXGBE_RTRPCS_RAC;
+	IXGBE_WRITE_REG(hw, IXGBE_RTRPCS, reg);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_dcb_config_tx_desc_arbiter_82599 - Config Tx Desc. arbiter
+ * @hw: pointer to hardware structure
+ * @dcb_config: pointer to ixgbe_dcb_config structure
+ *
+ * Configure Tx Descriptor Arbiter and credits for each traffic class.
+ */
+s32 ixgbe_dcb_config_tx_desc_arbiter_82599(struct ixgbe_hw *hw, u16 *refill,
+					   u16 *max, u8 *bwg_id, u8 *tsa)
+{
+	u32 reg, max_credits;
+	u8  i;
+
+	/* Clear the per-Tx queue credits; we use per-TC instead */
+	for (i = 0; i < 128; i++) {
+		IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, i);
+		IXGBE_WRITE_REG(hw, IXGBE_RTTDT1C, 0);
+	}
+
+	/* Configure traffic class credits and priority */
+	for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) {
+		max_credits = max[i];
+		reg = max_credits << IXGBE_RTTDT2C_MCL_SHIFT;
+		reg |= refill[i];
+		reg |= (u32)(bwg_id[i]) << IXGBE_RTTDT2C_BWG_SHIFT;
+
+		if (tsa[i] == ixgbe_dcb_tsa_group_strict_cee)
+			reg |= IXGBE_RTTDT2C_GSP;
+
+		if (tsa[i] == ixgbe_dcb_tsa_strict)
+			reg |= IXGBE_RTTDT2C_LSP;
+
+		IXGBE_WRITE_REG(hw, IXGBE_RTTDT2C(i), reg);
+	}
+
+	/*
+	 * Configure Tx descriptor plane (recycle mode; WSP) and
+	 * enable arbiter
+	 */
+	reg = IXGBE_RTTDCS_TDPAC | IXGBE_RTTDCS_TDRM;
+	IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, reg);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_dcb_config_tx_data_arbiter_82599 - Config Tx Data arbiter
+ * @hw: pointer to hardware structure
+ * @dcb_config: pointer to ixgbe_dcb_config structure
+ *
+ * Configure Tx Packet Arbiter and credits for each traffic class.
+ */
+s32 ixgbe_dcb_config_tx_data_arbiter_82599(struct ixgbe_hw *hw, u16 *refill,
+					   u16 *max, u8 *bwg_id, u8 *tsa,
+					   u8 *map)
+{
+	u32 reg;
+	u8 i;
+
+	/*
+	 * Disable the arbiter before changing parameters
+	 * (always enable recycle mode; SP; arb delay)
+	 */
+	reg = IXGBE_RTTPCS_TPPAC | IXGBE_RTTPCS_TPRM |
+	      (IXGBE_RTTPCS_ARBD_DCB << IXGBE_RTTPCS_ARBD_SHIFT) |
+	      IXGBE_RTTPCS_ARBDIS;
+	IXGBE_WRITE_REG(hw, IXGBE_RTTPCS, reg);
+
+	/*
+	 * map all UPs to TCs. up_to_tc_bitmap for each TC has corresponding
+	 * bits sets for the UPs that needs to be mappped to that TC.
+	 * e.g if priorities 6 and 7 are to be mapped to a TC then the
+	 * up_to_tc_bitmap value for that TC will be 11000000 in binary.
+	 */
+	reg = 0;
+	for (i = 0; i < IXGBE_DCB_MAX_USER_PRIORITY; i++)
+		reg |= (map[i] << (i * IXGBE_RTTUP2TC_UP_SHIFT));
+
+	IXGBE_WRITE_REG(hw, IXGBE_RTTUP2TC, reg);
+
+	/* Configure traffic class credits and priority */
+	for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) {
+		reg = refill[i];
+		reg |= (u32)(max[i]) << IXGBE_RTTPT2C_MCL_SHIFT;
+		reg |= (u32)(bwg_id[i]) << IXGBE_RTTPT2C_BWG_SHIFT;
+
+		if (tsa[i] == ixgbe_dcb_tsa_group_strict_cee)
+			reg |= IXGBE_RTTPT2C_GSP;
+
+		if (tsa[i] == ixgbe_dcb_tsa_strict)
+			reg |= IXGBE_RTTPT2C_LSP;
+
+		IXGBE_WRITE_REG(hw, IXGBE_RTTPT2C(i), reg);
+	}
+
+	/*
+	 * Configure Tx packet plane (recycle mode; SP; arb delay) and
+	 * enable arbiter
+	 */
+	reg = IXGBE_RTTPCS_TPPAC | IXGBE_RTTPCS_TPRM |
+	      (IXGBE_RTTPCS_ARBD_DCB << IXGBE_RTTPCS_ARBD_SHIFT);
+	IXGBE_WRITE_REG(hw, IXGBE_RTTPCS, reg);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_dcb_config_pfc_82599 - Configure priority flow control
+ * @hw: pointer to hardware structure
+ * @pfc_en: enabled pfc bitmask
+ * @map: priority to tc assignments indexed by priority
+ *
+ * Configure Priority Flow Control (PFC) for each traffic class.
+ */
+s32 ixgbe_dcb_config_pfc_82599(struct ixgbe_hw *hw, u8 pfc_en, u8 *map)
+{
+	u32 i, j, fcrtl, reg;
+	u8 max_tc = 0;
+
+	/* Enable Transmit Priority Flow Control */
+	IXGBE_WRITE_REG(hw, IXGBE_FCCFG, IXGBE_FCCFG_TFCE_PRIORITY);
+
+	/* Enable Receive Priority Flow Control */
+	reg = IXGBE_READ_REG(hw, IXGBE_MFLCN);
+	reg |= IXGBE_MFLCN_DPF;
+
+	/*
+	 * X540 supports per TC Rx priority flow control.  So
+	 * clear all TCs and only enable those that should be
+	 * enabled.
+	 */
+	reg &= ~(IXGBE_MFLCN_RPFCE_MASK | IXGBE_MFLCN_RFCE);
+
+	if (hw->mac.type >= ixgbe_mac_X540)
+		reg |= pfc_en << IXGBE_MFLCN_RPFCE_SHIFT;
+
+	if (pfc_en)
+		reg |= IXGBE_MFLCN_RPFCE;
+
+	IXGBE_WRITE_REG(hw, IXGBE_MFLCN, reg);
+
+	for (i = 0; i < IXGBE_DCB_MAX_USER_PRIORITY; i++) {
+		if (map[i] > max_tc)
+			max_tc = map[i];
+	}
+
+
+	/* Configure PFC Tx thresholds per TC */
+	for (i = 0; i <= max_tc; i++) {
+		int enabled = 0;
+
+		for (j = 0; j < IXGBE_DCB_MAX_USER_PRIORITY; j++) {
+			if ((map[j] == i) && (pfc_en & (1 << j))) {
+				enabled = 1;
+				break;
+			}
+		}
+
+		if (enabled) {
+			reg = (hw->fc.high_water[i] << 10) | IXGBE_FCRTH_FCEN;
+			fcrtl = (hw->fc.low_water[i] << 10) | IXGBE_FCRTL_XONE;
+			IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), fcrtl);
+		} else {
+			/*
+			 * In order to prevent Tx hangs when the internal Tx
+			 * switch is enabled we must set the high water mark
+			 * to the Rx packet buffer size - 24KB.  This allows
+			 * the Tx switch to function even under heavy Rx
+			 * workloads.
+			 */
+			reg = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i)) - 24576;
+			IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), 0);
+		}
+
+		IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(i), reg);
+	}
+
+	for (; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) {
+		IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), 0);
+		IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(i), 0);
+	}
+
+	/* Configure pause time (2 TCs per register) */
+	reg = hw->fc.pause_time | (hw->fc.pause_time << 16);
+	for (i = 0; i < (IXGBE_DCB_MAX_TRAFFIC_CLASS / 2); i++)
+		IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), reg);
+
+	/* Configure flow control refresh threshold value */
+	IXGBE_WRITE_REG(hw, IXGBE_FCRTV, hw->fc.pause_time / 2);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_dcb_config_tc_stats_82599 - Config traffic class statistics
+ * @hw: pointer to hardware structure
+ *
+ * Configure queue statistics registers, all queues belonging to same traffic
+ * class uses a single set of queue statistics counters.
+ */
+s32 ixgbe_dcb_config_tc_stats_82599(struct ixgbe_hw *hw,
+				    struct ixgbe_dcb_config *dcb_config)
+{
+	u32 reg = 0;
+	u8  i   = 0;
+	u8 tc_count = 8;
+	bool vt_mode = false;
+
+	if (dcb_config != NULL) {
+		tc_count = dcb_config->num_tcs.pg_tcs;
+		vt_mode = dcb_config->vt_mode;
+	}
+
+	if (!((tc_count == 8 && vt_mode == false) || tc_count == 4))
+		return IXGBE_ERR_PARAM;
+
+	if (tc_count == 8 && vt_mode == false) {
+		/*
+		 * Receive Queues stats setting
+		 * 32 RQSMR registers, each configuring 4 queues.
+		 *
+		 * Set all 16 queues of each TC to the same stat
+		 * with TC 'n' going to stat 'n'.
+		 */
+		for (i = 0; i < 32; i++) {
+			reg = 0x01010101 * (i / 4);
+			IXGBE_WRITE_REG(hw, IXGBE_RQSMR(i), reg);
+		}
+		/*
+		 * Transmit Queues stats setting
+		 * 32 TQSM registers, each controlling 4 queues.
+		 *
+		 * Set all queues of each TC to the same stat
+		 * with TC 'n' going to stat 'n'.
+		 * Tx queues are allocated non-uniformly to TCs:
+		 * 32, 32, 16, 16, 8, 8, 8, 8.
+		 */
+		for (i = 0; i < 32; i++) {
+			if (i < 8)
+				reg = 0x00000000;
+			else if (i < 16)
+				reg = 0x01010101;
+			else if (i < 20)
+				reg = 0x02020202;
+			else if (i < 24)
+				reg = 0x03030303;
+			else if (i < 26)
+				reg = 0x04040404;
+			else if (i < 28)
+				reg = 0x05050505;
+			else if (i < 30)
+				reg = 0x06060606;
+			else
+				reg = 0x07070707;
+			IXGBE_WRITE_REG(hw, IXGBE_TQSM(i), reg);
+		}
+	} else if (tc_count == 4 && vt_mode == false) {
+		/*
+		 * Receive Queues stats setting
+		 * 32 RQSMR registers, each configuring 4 queues.
+		 *
+		 * Set all 16 queues of each TC to the same stat
+		 * with TC 'n' going to stat 'n'.
+		 */
+		for (i = 0; i < 32; i++) {
+			if (i % 8 > 3)
+				/* In 4 TC mode, odd 16-queue ranges are
+				 *  not used.
+				*/
+				continue;
+			reg = 0x01010101 * (i / 8);
+			IXGBE_WRITE_REG(hw, IXGBE_RQSMR(i), reg);
+		}
+		/*
+		 * Transmit Queues stats setting
+		 * 32 TQSM registers, each controlling 4 queues.
+		 *
+		 * Set all queues of each TC to the same stat
+		 * with TC 'n' going to stat 'n'.
+		 * Tx queues are allocated non-uniformly to TCs:
+		 * 64, 32, 16, 16.
+		 */
+		for (i = 0; i < 32; i++) {
+			if (i < 16)
+				reg = 0x00000000;
+			else if (i < 24)
+				reg = 0x01010101;
+			else if (i < 28)
+				reg = 0x02020202;
+			else
+				reg = 0x03030303;
+			IXGBE_WRITE_REG(hw, IXGBE_TQSM(i), reg);
+		}
+	} else if (tc_count == 4 && vt_mode == true) {
+		/*
+		 * Receive Queues stats setting
+		 * 32 RQSMR registers, each configuring 4 queues.
+		 *
+		 * Queue Indexing in 32 VF with DCB mode maps 4 TC's to each
+		 * pool. Set all 32 queues of each TC across pools to the same
+		 * stat with TC 'n' going to stat 'n'.
+		 */
+		for (i = 0; i < 32; i++)
+			IXGBE_WRITE_REG(hw, IXGBE_RQSMR(i), 0x03020100);
+		/*
+		 * Transmit Queues stats setting
+		 * 32 TQSM registers, each controlling 4 queues.
+		 *
+		 * Queue Indexing in 32 VF with DCB mode maps 4 TC's to each
+		 * pool. Set all 32 queues of each TC across pools to the same
+		 * stat with TC 'n' going to stat 'n'.
+		 */
+		for (i = 0; i < 32; i++)
+			IXGBE_WRITE_REG(hw, IXGBE_TQSM(i), 0x03020100);
+	}
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_dcb_config_82599 - Configure general DCB parameters
+ * @hw: pointer to hardware structure
+ * @dcb_config: pointer to ixgbe_dcb_config structure
+ *
+ * Configure general DCB parameters.
+ */
+s32 ixgbe_dcb_config_82599(struct ixgbe_hw *hw,
+			   struct ixgbe_dcb_config *dcb_config)
+{
+	u32 reg;
+	u32 q;
+
+	/* Disable the Tx desc arbiter so that MTQC can be changed */
+	reg = IXGBE_READ_REG(hw, IXGBE_RTTDCS);
+	reg |= IXGBE_RTTDCS_ARBDIS;
+	IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, reg);
+
+	reg = IXGBE_READ_REG(hw, IXGBE_MRQC);
+	if (dcb_config->num_tcs.pg_tcs == 8) {
+		/* Enable DCB for Rx with 8 TCs */
+		switch (reg & IXGBE_MRQC_MRQE_MASK) {
+		case 0:
+		case IXGBE_MRQC_RT4TCEN:
+			/* RSS disabled cases */
+			reg = (reg & ~IXGBE_MRQC_MRQE_MASK) |
+			      IXGBE_MRQC_RT8TCEN;
+			break;
+		case IXGBE_MRQC_RSSEN:
+		case IXGBE_MRQC_RTRSS4TCEN:
+			/* RSS enabled cases */
+			reg = (reg & ~IXGBE_MRQC_MRQE_MASK) |
+			      IXGBE_MRQC_RTRSS8TCEN;
+			break;
+		default:
+			/*
+			 * Unsupported value, assume stale data,
+			 * overwrite no RSS
+			 */
+			ASSERT(0);
+			reg = (reg & ~IXGBE_MRQC_MRQE_MASK) |
+			      IXGBE_MRQC_RT8TCEN;
+		}
+	}
+	if (dcb_config->num_tcs.pg_tcs == 4) {
+		/* We support both VT-on and VT-off with 4 TCs. */
+		if (dcb_config->vt_mode)
+			reg = (reg & ~IXGBE_MRQC_MRQE_MASK) |
+			      IXGBE_MRQC_VMDQRT4TCEN;
+		else
+			reg = (reg & ~IXGBE_MRQC_MRQE_MASK) |
+			      IXGBE_MRQC_RTRSS4TCEN;
+	}
+	IXGBE_WRITE_REG(hw, IXGBE_MRQC, reg);
+
+	/* Enable DCB for Tx with 8 TCs */
+	if (dcb_config->num_tcs.pg_tcs == 8)
+		reg = IXGBE_MTQC_RT_ENA | IXGBE_MTQC_8TC_8TQ;
+	else {
+		/* We support both VT-on and VT-off with 4 TCs. */
+		reg = IXGBE_MTQC_RT_ENA | IXGBE_MTQC_4TC_4TQ;
+		if (dcb_config->vt_mode)
+			reg |= IXGBE_MTQC_VT_ENA;
+	}
+	IXGBE_WRITE_REG(hw, IXGBE_MTQC, reg);
+
+	/* Disable drop for all queues */
+	for (q = 0; q < 128; q++)
+		IXGBE_WRITE_REG(hw, IXGBE_QDE,
+				(IXGBE_QDE_WRITE | (q << IXGBE_QDE_IDX_SHIFT)));
+
+	/* Enable the Tx desc arbiter */
+	reg = IXGBE_READ_REG(hw, IXGBE_RTTDCS);
+	reg &= ~IXGBE_RTTDCS_ARBDIS;
+	IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, reg);
+
+	/* Enable Security TX Buffer IFG for DCB */
+	reg = IXGBE_READ_REG(hw, IXGBE_SECTXMINIFG);
+	reg |= IXGBE_SECTX_DCB;
+	IXGBE_WRITE_REG(hw, IXGBE_SECTXMINIFG, reg);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_dcb_hw_config_82599 - Configure and enable DCB
+ * @hw: pointer to hardware structure
+ * @dcb_config: pointer to ixgbe_dcb_config structure
+ *
+ * Configure dcb settings and enable dcb mode.
+ */
+s32 ixgbe_dcb_hw_config_82599(struct ixgbe_hw *hw, int link_speed,
+			      u16 *refill, u16 *max, u8 *bwg_id, u8 *tsa,
+			      u8 *map)
+{
+	UNREFERENCED_1PARAMETER(link_speed);
+
+	ixgbe_dcb_config_rx_arbiter_82599(hw, refill, max, bwg_id, tsa,
+					  map);
+	ixgbe_dcb_config_tx_desc_arbiter_82599(hw, refill, max, bwg_id,
+					       tsa);
+	ixgbe_dcb_config_tx_data_arbiter_82599(hw, refill, max, bwg_id,
+					       tsa, map);
+
+	return IXGBE_SUCCESS;
+}
+
diff --git a/drivers/net/ixgbe/base/ixgbe_dcb_82599.h b/drivers/net/ixgbe/base/ixgbe_dcb_82599.h
new file mode 100644
index 00000000..dc0fb284
--- /dev/null
+++ b/drivers/net/ixgbe/base/ixgbe_dcb_82599.h
@@ -0,0 +1,153 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+    this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in the
+    documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+    contributors may be used to endorse or promote products derived from
+    this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#ifndef _IXGBE_DCB_82599_H_
+#define _IXGBE_DCB_82599_H_
+
+/* DCB register definitions */
+#define IXGBE_RTTDCS_TDPAC	0x00000001 /* 0 Round Robin,
+					    * 1 WSP - Weighted Strict Priority
+					    */
+#define IXGBE_RTTDCS_VMPAC	0x00000002 /* 0 Round Robin,
+					    * 1 WRR - Weighted Round Robin
+					    */
+#define IXGBE_RTTDCS_TDRM	0x00000010 /* Transmit Recycle Mode */
+#define IXGBE_RTTDCS_BDPM	0x00400000 /* Bypass Data Pipe - must clear! */
+#define IXGBE_RTTDCS_BPBFSM	0x00800000 /* Bypass PB Free Space - must
+					     * clear!
+					     */
+#define IXGBE_RTTDCS_SPEED_CHG	0x80000000 /* Link speed change */
+
+/* Receive UP2TC mapping */
+#define IXGBE_RTRUP2TC_UP_SHIFT	3
+#define IXGBE_RTRUP2TC_UP_MASK	7
+/* Transmit UP2TC mapping */
+#define IXGBE_RTTUP2TC_UP_SHIFT	3
+
+#define IXGBE_RTRPT4C_MCL_SHIFT	12 /* Offset to Max Credit Limit setting */
+#define IXGBE_RTRPT4C_BWG_SHIFT	9  /* Offset to BWG index */
+#define IXGBE_RTRPT4C_GSP	0x40000000 /* GSP enable bit */
+#define IXGBE_RTRPT4C_LSP	0x80000000 /* LSP enable bit */
+
+#define IXGBE_RDRXCTL_MPBEN	0x00000010 /* DMA config for multiple packet
+					    * buffers enable
+					    */
+#define IXGBE_RDRXCTL_MCEN	0x00000040 /* DMA config for multiple cores
+					    * (RSS) enable
+					    */
+
+/* RTRPCS Bit Masks */
+#define IXGBE_RTRPCS_RRM	0x00000002 /* Receive Recycle Mode enable */
+/* Receive Arbitration Control: 0 Round Robin, 1 DFP */
+#define IXGBE_RTRPCS_RAC	0x00000004
+#define IXGBE_RTRPCS_ARBDIS	0x00000040 /* Arbitration disable bit */
+
+/* RTTDT2C Bit Masks */
+#define IXGBE_RTTDT2C_MCL_SHIFT	12
+#define IXGBE_RTTDT2C_BWG_SHIFT	9
+#define IXGBE_RTTDT2C_GSP	0x40000000
+#define IXGBE_RTTDT2C_LSP	0x80000000
+
+#define IXGBE_RTTPT2C_MCL_SHIFT	12
+#define IXGBE_RTTPT2C_BWG_SHIFT	9
+#define IXGBE_RTTPT2C_GSP	0x40000000
+#define IXGBE_RTTPT2C_LSP	0x80000000
+
+/* RTTPCS Bit Masks */
+#define IXGBE_RTTPCS_TPPAC	0x00000020 /* 0 Round Robin,
+					    * 1 SP - Strict Priority
+					    */
+#define IXGBE_RTTPCS_ARBDIS	0x00000040 /* Arbiter disable */
+#define IXGBE_RTTPCS_TPRM	0x00000100 /* Transmit Recycle Mode enable */
+#define IXGBE_RTTPCS_ARBD_SHIFT	22
+#define IXGBE_RTTPCS_ARBD_DCB	0x4 /* Arbitration delay in DCB mode */
+
+#define IXGBE_TXPBTHRESH_DCB	0xA /* THRESH value for DCB mode */
+
+/* SECTXMINIFG DCB */
+#define IXGBE_SECTX_DCB		0x00001F00 /* DCB TX Buffer SEC IFG */
+
+/* BCN register definitions */
+#define IXGBE_RTTBCNRC_RF_INT_SHIFT	14
+#define IXGBE_RTTBCNRC_RS_ENA		0x80000000
+
+#define IXGBE_RTTBCNCR_MNG_CMTGI	0x00000001
+#define IXGBE_RTTBCNCR_MGN_BCNA_MODE	0x00000002
+#define IXGBE_RTTBCNCR_RSV7_11_SHIFT	5
+#define IXGBE_RTTBCNCR_G		0x00000400
+#define IXGBE_RTTBCNCR_I		0x00000800
+#define IXGBE_RTTBCNCR_H		0x00001000
+#define IXGBE_RTTBCNCR_VER_SHIFT	14
+#define IXGBE_RTTBCNCR_CMT_ETH_SHIFT	16
+
+#define IXGBE_RTTBCNACL_SMAC_L_SHIFT	16
+
+#define IXGBE_RTTBCNTG_BCNA_MODE	0x80000000
+
+#define IXGBE_RTTBCNRTT_TS_SHIFT	3
+#define IXGBE_RTTBCNRTT_TXQ_IDX_SHIFT	16
+
+#define IXGBE_RTTBCNRD_BCN_CLEAR_ALL	0x00000002
+#define IXGBE_RTTBCNRD_DRIFT_FAC_SHIFT	2
+#define IXGBE_RTTBCNRD_DRIFT_INT_SHIFT	16
+#define IXGBE_RTTBCNRD_DRIFT_ENA	0x80000000
+
+
+/* DCB driver APIs */
+
+/* DCB PFC */
+s32 ixgbe_dcb_config_pfc_82599(struct ixgbe_hw *, u8, u8 *);
+
+/* DCB stats */
+s32 ixgbe_dcb_config_tc_stats_82599(struct ixgbe_hw *,
+				    struct ixgbe_dcb_config *);
+s32 ixgbe_dcb_get_tc_stats_82599(struct ixgbe_hw *,
+				 struct ixgbe_hw_stats *, u8);
+s32 ixgbe_dcb_get_pfc_stats_82599(struct ixgbe_hw *,
+				  struct ixgbe_hw_stats *, u8);
+
+/* DCB config arbiters */
+s32 ixgbe_dcb_config_tx_desc_arbiter_82599(struct ixgbe_hw *, u16 *, u16 *,
+					   u8 *, u8 *);
+s32 ixgbe_dcb_config_tx_data_arbiter_82599(struct ixgbe_hw *, u16 *, u16 *,
+					   u8 *, u8 *, u8 *);
+s32 ixgbe_dcb_config_rx_arbiter_82599(struct ixgbe_hw *, u16 *, u16 *, u8 *,
+				      u8 *, u8 *);
+
+/* DCB initialization */
+s32 ixgbe_dcb_config_82599(struct ixgbe_hw *,
+			   struct ixgbe_dcb_config *);
+
+s32 ixgbe_dcb_hw_config_82599(struct ixgbe_hw *, int, u16 *, u16 *, u8 *,
+			      u8 *, u8 *);
+#endif /* _IXGBE_DCB_82959_H_ */
diff --git a/drivers/net/ixgbe/base/ixgbe_mbx.c b/drivers/net/ixgbe/base/ixgbe_mbx.c
new file mode 100644
index 00000000..042e5cc1
--- /dev/null
+++ b/drivers/net/ixgbe/base/ixgbe_mbx.c
@@ -0,0 +1,791 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+    this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in the
+    documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+    contributors may be used to endorse or promote products derived from
+    this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#include "ixgbe_type.h"
+#include "ixgbe_mbx.h"
+
+/**
+ *  ixgbe_read_mbx - Reads a message from the mailbox
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *  @mbx_id: id of mailbox to read
+ *
+ *  returns SUCCESS if it successfully read message from buffer
+ **/
+s32 ixgbe_read_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size, u16 mbx_id)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+	s32 ret_val = IXGBE_ERR_MBX;
+
+	DEBUGFUNC("ixgbe_read_mbx");
+
+	/* limit read to size of mailbox */
+	if (size > mbx->size)
+		size = mbx->size;
+
+	if (mbx->ops.read)
+		ret_val = mbx->ops.read(hw, msg, size, mbx_id);
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_write_mbx - Write a message to the mailbox
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *  @mbx_id: id of mailbox to write
+ *
+ *  returns SUCCESS if it successfully copied message into the buffer
+ **/
+s32 ixgbe_write_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size, u16 mbx_id)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+	s32 ret_val = IXGBE_SUCCESS;
+
+	DEBUGFUNC("ixgbe_write_mbx");
+
+	if (size > mbx->size) {
+		ret_val = IXGBE_ERR_MBX;
+		ERROR_REPORT2(IXGBE_ERROR_ARGUMENT,
+			     "Invalid mailbox message size %d", size);
+	} else if (mbx->ops.write)
+		ret_val = mbx->ops.write(hw, msg, size, mbx_id);
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_check_for_msg - checks to see if someone sent us mail
+ *  @hw: pointer to the HW structure
+ *  @mbx_id: id of mailbox to check
+ *
+ *  returns SUCCESS if the Status bit was found or else ERR_MBX
+ **/
+s32 ixgbe_check_for_msg(struct ixgbe_hw *hw, u16 mbx_id)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+	s32 ret_val = IXGBE_ERR_MBX;
+
+	DEBUGFUNC("ixgbe_check_for_msg");
+
+	if (mbx->ops.check_for_msg)
+		ret_val = mbx->ops.check_for_msg(hw, mbx_id);
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_check_for_ack - checks to see if someone sent us ACK
+ *  @hw: pointer to the HW structure
+ *  @mbx_id: id of mailbox to check
+ *
+ *  returns SUCCESS if the Status bit was found or else ERR_MBX
+ **/
+s32 ixgbe_check_for_ack(struct ixgbe_hw *hw, u16 mbx_id)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+	s32 ret_val = IXGBE_ERR_MBX;
+
+	DEBUGFUNC("ixgbe_check_for_ack");
+
+	if (mbx->ops.check_for_ack)
+		ret_val = mbx->ops.check_for_ack(hw, mbx_id);
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_check_for_rst - checks to see if other side has reset
+ *  @hw: pointer to the HW structure
+ *  @mbx_id: id of mailbox to check
+ *
+ *  returns SUCCESS if the Status bit was found or else ERR_MBX
+ **/
+s32 ixgbe_check_for_rst(struct ixgbe_hw *hw, u16 mbx_id)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+	s32 ret_val = IXGBE_ERR_MBX;
+
+	DEBUGFUNC("ixgbe_check_for_rst");
+
+	if (mbx->ops.check_for_rst)
+		ret_val = mbx->ops.check_for_rst(hw, mbx_id);
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_poll_for_msg - Wait for message notification
+ *  @hw: pointer to the HW structure
+ *  @mbx_id: id of mailbox to write
+ *
+ *  returns SUCCESS if it successfully received a message notification
+ **/
+STATIC s32 ixgbe_poll_for_msg(struct ixgbe_hw *hw, u16 mbx_id)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+	int countdown = mbx->timeout;
+
+	DEBUGFUNC("ixgbe_poll_for_msg");
+
+	if (!countdown || !mbx->ops.check_for_msg)
+		goto out;
+
+	while (countdown && mbx->ops.check_for_msg(hw, mbx_id)) {
+		countdown--;
+		if (!countdown)
+			break;
+		usec_delay(mbx->usec_delay);
+	}
+
+	if (countdown == 0)
+		ERROR_REPORT2(IXGBE_ERROR_POLLING,
+			   "Polling for VF%d mailbox message timedout", mbx_id);
+
+out:
+	return countdown ? IXGBE_SUCCESS : IXGBE_ERR_MBX;
+}
+
+/**
+ *  ixgbe_poll_for_ack - Wait for message acknowledgement
+ *  @hw: pointer to the HW structure
+ *  @mbx_id: id of mailbox to write
+ *
+ *  returns SUCCESS if it successfully received a message acknowledgement
+ **/
+STATIC s32 ixgbe_poll_for_ack(struct ixgbe_hw *hw, u16 mbx_id)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+	int countdown = mbx->timeout;
+
+	DEBUGFUNC("ixgbe_poll_for_ack");
+
+	if (!countdown || !mbx->ops.check_for_ack)
+		goto out;
+
+	while (countdown && mbx->ops.check_for_ack(hw, mbx_id)) {
+		countdown--;
+		if (!countdown)
+			break;
+		usec_delay(mbx->usec_delay);
+	}
+
+	if (countdown == 0)
+		ERROR_REPORT2(IXGBE_ERROR_POLLING,
+			     "Polling for VF%d mailbox ack timedout", mbx_id);
+
+out:
+	return countdown ? IXGBE_SUCCESS : IXGBE_ERR_MBX;
+}
+
+/**
+ *  ixgbe_read_posted_mbx - Wait for message notification and receive message
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *  @mbx_id: id of mailbox to write
+ *
+ *  returns SUCCESS if it successfully received a message notification and
+ *  copied it into the receive buffer.
+ **/
+s32 ixgbe_read_posted_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size, u16 mbx_id)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+	s32 ret_val = IXGBE_ERR_MBX;
+
+	DEBUGFUNC("ixgbe_read_posted_mbx");
+
+	if (!mbx->ops.read)
+		goto out;
+
+	ret_val = ixgbe_poll_for_msg(hw, mbx_id);
+
+	/* if ack received read message, otherwise we timed out */
+	if (!ret_val)
+		ret_val = mbx->ops.read(hw, msg, size, mbx_id);
+out:
+	return ret_val;
+}
+
+/**
+ *  ixgbe_write_posted_mbx - Write a message to the mailbox, wait for ack
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *  @mbx_id: id of mailbox to write
+ *
+ *  returns SUCCESS if it successfully copied message into the buffer and
+ *  received an ack to that message within delay * timeout period
+ **/
+s32 ixgbe_write_posted_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size,
+			   u16 mbx_id)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+	s32 ret_val = IXGBE_ERR_MBX;
+
+	DEBUGFUNC("ixgbe_write_posted_mbx");
+
+	/* exit if either we can't write or there isn't a defined timeout */
+	if (!mbx->ops.write || !mbx->timeout)
+		goto out;
+
+	/* send msg */
+	ret_val = mbx->ops.write(hw, msg, size, mbx_id);
+
+	/* if msg sent wait until we receive an ack */
+	if (!ret_val)
+		ret_val = ixgbe_poll_for_ack(hw, mbx_id);
+out:
+	return ret_val;
+}
+
+/**
+ *  ixgbe_init_mbx_ops_generic - Initialize MB function pointers
+ *  @hw: pointer to the HW structure
+ *
+ *  Setups up the mailbox read and write message function pointers
+ **/
+void ixgbe_init_mbx_ops_generic(struct ixgbe_hw *hw)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+
+	mbx->ops.read_posted = ixgbe_read_posted_mbx;
+	mbx->ops.write_posted = ixgbe_write_posted_mbx;
+}
+
+/**
+ *  ixgbe_read_v2p_mailbox - read v2p mailbox
+ *  @hw: pointer to the HW structure
+ *
+ *  This function is used to read the v2p mailbox without losing the read to
+ *  clear status bits.
+ **/
+STATIC u32 ixgbe_read_v2p_mailbox(struct ixgbe_hw *hw)
+{
+	u32 v2p_mailbox = IXGBE_READ_REG(hw, IXGBE_VFMAILBOX);
+
+	v2p_mailbox |= hw->mbx.v2p_mailbox;
+	hw->mbx.v2p_mailbox |= v2p_mailbox & IXGBE_VFMAILBOX_R2C_BITS;
+
+	return v2p_mailbox;
+}
+
+/**
+ *  ixgbe_check_for_bit_vf - Determine if a status bit was set
+ *  @hw: pointer to the HW structure
+ *  @mask: bitmask for bits to be tested and cleared
+ *
+ *  This function is used to check for the read to clear bits within
+ *  the V2P mailbox.
+ **/
+STATIC s32 ixgbe_check_for_bit_vf(struct ixgbe_hw *hw, u32 mask)
+{
+	u32 v2p_mailbox = ixgbe_read_v2p_mailbox(hw);
+	s32 ret_val = IXGBE_ERR_MBX;
+
+	if (v2p_mailbox & mask)
+		ret_val = IXGBE_SUCCESS;
+
+	hw->mbx.v2p_mailbox &= ~mask;
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_check_for_msg_vf - checks to see if the PF has sent mail
+ *  @hw: pointer to the HW structure
+ *  @mbx_id: id of mailbox to check
+ *
+ *  returns SUCCESS if the PF has set the Status bit or else ERR_MBX
+ **/
+STATIC s32 ixgbe_check_for_msg_vf(struct ixgbe_hw *hw, u16 mbx_id)
+{
+	s32 ret_val = IXGBE_ERR_MBX;
+
+	UNREFERENCED_1PARAMETER(mbx_id);
+	DEBUGFUNC("ixgbe_check_for_msg_vf");
+
+	if (!ixgbe_check_for_bit_vf(hw, IXGBE_VFMAILBOX_PFSTS)) {
+		ret_val = IXGBE_SUCCESS;
+		hw->mbx.stats.reqs++;
+	}
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_check_for_ack_vf - checks to see if the PF has ACK'd
+ *  @hw: pointer to the HW structure
+ *  @mbx_id: id of mailbox to check
+ *
+ *  returns SUCCESS if the PF has set the ACK bit or else ERR_MBX
+ **/
+STATIC s32 ixgbe_check_for_ack_vf(struct ixgbe_hw *hw, u16 mbx_id)
+{
+	s32 ret_val = IXGBE_ERR_MBX;
+
+	UNREFERENCED_1PARAMETER(mbx_id);
+	DEBUGFUNC("ixgbe_check_for_ack_vf");
+
+	if (!ixgbe_check_for_bit_vf(hw, IXGBE_VFMAILBOX_PFACK)) {
+		ret_val = IXGBE_SUCCESS;
+		hw->mbx.stats.acks++;
+	}
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_check_for_rst_vf - checks to see if the PF has reset
+ *  @hw: pointer to the HW structure
+ *  @mbx_id: id of mailbox to check
+ *
+ *  returns true if the PF has set the reset done bit or else false
+ **/
+STATIC s32 ixgbe_check_for_rst_vf(struct ixgbe_hw *hw, u16 mbx_id)
+{
+	s32 ret_val = IXGBE_ERR_MBX;
+
+	UNREFERENCED_1PARAMETER(mbx_id);
+	DEBUGFUNC("ixgbe_check_for_rst_vf");
+
+	if (!ixgbe_check_for_bit_vf(hw, (IXGBE_VFMAILBOX_RSTD |
+	    IXGBE_VFMAILBOX_RSTI))) {
+		ret_val = IXGBE_SUCCESS;
+		hw->mbx.stats.rsts++;
+	}
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_obtain_mbx_lock_vf - obtain mailbox lock
+ *  @hw: pointer to the HW structure
+ *
+ *  return SUCCESS if we obtained the mailbox lock
+ **/
+STATIC s32 ixgbe_obtain_mbx_lock_vf(struct ixgbe_hw *hw)
+{
+	s32 ret_val = IXGBE_ERR_MBX;
+
+	DEBUGFUNC("ixgbe_obtain_mbx_lock_vf");
+
+	/* Take ownership of the buffer */
+	IXGBE_WRITE_REG(hw, IXGBE_VFMAILBOX, IXGBE_VFMAILBOX_VFU);
+
+	/* reserve mailbox for vf use */
+	if (ixgbe_read_v2p_mailbox(hw) & IXGBE_VFMAILBOX_VFU)
+		ret_val = IXGBE_SUCCESS;
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_write_mbx_vf - Write a message to the mailbox
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *  @mbx_id: id of mailbox to write
+ *
+ *  returns SUCCESS if it successfully copied message into the buffer
+ **/
+STATIC s32 ixgbe_write_mbx_vf(struct ixgbe_hw *hw, u32 *msg, u16 size,
+			      u16 mbx_id)
+{
+	s32 ret_val;
+	u16 i;
+
+	UNREFERENCED_1PARAMETER(mbx_id);
+
+	DEBUGFUNC("ixgbe_write_mbx_vf");
+
+	/* lock the mailbox to prevent pf/vf race condition */
+	ret_val = ixgbe_obtain_mbx_lock_vf(hw);
+	if (ret_val)
+		goto out_no_write;
+
+	/* flush msg and acks as we are overwriting the message buffer */
+	ixgbe_check_for_msg_vf(hw, 0);
+	ixgbe_check_for_ack_vf(hw, 0);
+
+	/* copy the caller specified message to the mailbox memory buffer */
+	for (i = 0; i < size; i++)
+		IXGBE_WRITE_REG_ARRAY(hw, IXGBE_VFMBMEM, i, msg[i]);
+
+	/*
+	 * Complete the remaining mailbox data registers with zero to reset
+	 * the data sent in a previous exchange (in either side) with the PF,
+	 * including exchanges performed by another Guest OS to which that VF
+	 * was previously assigned.
+	 */
+	while (i < hw->mbx.size) {
+		IXGBE_WRITE_REG_ARRAY(hw, IXGBE_VFMBMEM, i, 0);
+		i++;
+	}
+
+	/* update stats */
+	hw->mbx.stats.msgs_tx++;
+
+	/* Drop VFU and interrupt the PF to tell it a message has been sent */
+	IXGBE_WRITE_REG(hw, IXGBE_VFMAILBOX, IXGBE_VFMAILBOX_REQ);
+
+out_no_write:
+	return ret_val;
+}
+
+/**
+ *  ixgbe_read_mbx_vf - Reads a message from the inbox intended for vf
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *  @mbx_id: id of mailbox to read
+ *
+ *  returns SUCCESS if it successfully read message from buffer
+ **/
+STATIC s32 ixgbe_read_mbx_vf(struct ixgbe_hw *hw, u32 *msg, u16 size,
+			     u16 mbx_id)
+{
+	s32 ret_val = IXGBE_SUCCESS;
+	u16 i;
+
+	DEBUGFUNC("ixgbe_read_mbx_vf");
+	UNREFERENCED_1PARAMETER(mbx_id);
+
+	/* lock the mailbox to prevent pf/vf race condition */
+	ret_val = ixgbe_obtain_mbx_lock_vf(hw);
+	if (ret_val)
+		goto out_no_read;
+
+	/* copy the message from the mailbox memory buffer */
+	for (i = 0; i < size; i++)
+		msg[i] = IXGBE_READ_REG_ARRAY(hw, IXGBE_VFMBMEM, i);
+
+	/* Acknowledge receipt and release mailbox, then we're done */
+	IXGBE_WRITE_REG(hw, IXGBE_VFMAILBOX, IXGBE_VFMAILBOX_ACK);
+
+	/* update stats */
+	hw->mbx.stats.msgs_rx++;
+
+out_no_read:
+	return ret_val;
+}
+
+/**
+ *  ixgbe_init_mbx_params_vf - set initial values for vf mailbox
+ *  @hw: pointer to the HW structure
+ *
+ *  Initializes the hw->mbx struct to correct values for vf mailbox
+ */
+void ixgbe_init_mbx_params_vf(struct ixgbe_hw *hw)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+
+	/* start mailbox as timed out and let the reset_hw call set the timeout
+	 * value to begin communications */
+	mbx->timeout = 0;
+	mbx->usec_delay = IXGBE_VF_MBX_INIT_DELAY;
+
+	mbx->size = IXGBE_VFMAILBOX_SIZE;
+
+	mbx->ops.read = ixgbe_read_mbx_vf;
+	mbx->ops.write = ixgbe_write_mbx_vf;
+	mbx->ops.read_posted = ixgbe_read_posted_mbx;
+	mbx->ops.write_posted = ixgbe_write_posted_mbx;
+	mbx->ops.check_for_msg = ixgbe_check_for_msg_vf;
+	mbx->ops.check_for_ack = ixgbe_check_for_ack_vf;
+	mbx->ops.check_for_rst = ixgbe_check_for_rst_vf;
+
+	mbx->stats.msgs_tx = 0;
+	mbx->stats.msgs_rx = 0;
+	mbx->stats.reqs = 0;
+	mbx->stats.acks = 0;
+	mbx->stats.rsts = 0;
+}
+
+STATIC s32 ixgbe_check_for_bit_pf(struct ixgbe_hw *hw, u32 mask, s32 index)
+{
+	u32 mbvficr = IXGBE_READ_REG(hw, IXGBE_MBVFICR(index));
+	s32 ret_val = IXGBE_ERR_MBX;
+
+	if (mbvficr & mask) {
+		ret_val = IXGBE_SUCCESS;
+		IXGBE_WRITE_REG(hw, IXGBE_MBVFICR(index), mask);
+	}
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_check_for_msg_pf - checks to see if the VF has sent mail
+ *  @hw: pointer to the HW structure
+ *  @vf_number: the VF index
+ *
+ *  returns SUCCESS if the VF has set the Status bit or else ERR_MBX
+ **/
+STATIC s32 ixgbe_check_for_msg_pf(struct ixgbe_hw *hw, u16 vf_number)
+{
+	s32 ret_val = IXGBE_ERR_MBX;
+	s32 index = IXGBE_MBVFICR_INDEX(vf_number);
+	u32 vf_bit = vf_number % 16;
+
+	DEBUGFUNC("ixgbe_check_for_msg_pf");
+
+	if (!ixgbe_check_for_bit_pf(hw, IXGBE_MBVFICR_VFREQ_VF1 << vf_bit,
+				    index)) {
+		ret_val = IXGBE_SUCCESS;
+		hw->mbx.stats.reqs++;
+	}
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_check_for_ack_pf - checks to see if the VF has ACKed
+ *  @hw: pointer to the HW structure
+ *  @vf_number: the VF index
+ *
+ *  returns SUCCESS if the VF has set the Status bit or else ERR_MBX
+ **/
+STATIC s32 ixgbe_check_for_ack_pf(struct ixgbe_hw *hw, u16 vf_number)
+{
+	s32 ret_val = IXGBE_ERR_MBX;
+	s32 index = IXGBE_MBVFICR_INDEX(vf_number);
+	u32 vf_bit = vf_number % 16;
+
+	DEBUGFUNC("ixgbe_check_for_ack_pf");
+
+	if (!ixgbe_check_for_bit_pf(hw, IXGBE_MBVFICR_VFACK_VF1 << vf_bit,
+				    index)) {
+		ret_val = IXGBE_SUCCESS;
+		hw->mbx.stats.acks++;
+	}
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_check_for_rst_pf - checks to see if the VF has reset
+ *  @hw: pointer to the HW structure
+ *  @vf_number: the VF index
+ *
+ *  returns SUCCESS if the VF has set the Status bit or else ERR_MBX
+ **/
+STATIC s32 ixgbe_check_for_rst_pf(struct ixgbe_hw *hw, u16 vf_number)
+{
+	u32 reg_offset = (vf_number < 32) ? 0 : 1;
+	u32 vf_shift = vf_number % 32;
+	u32 vflre = 0;
+	s32 ret_val = IXGBE_ERR_MBX;
+
+	DEBUGFUNC("ixgbe_check_for_rst_pf");
+
+	switch (hw->mac.type) {
+	case ixgbe_mac_82599EB:
+		vflre = IXGBE_READ_REG(hw, IXGBE_VFLRE(reg_offset));
+		break;
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+	case ixgbe_mac_X550EM_a:
+	case ixgbe_mac_X540:
+		vflre = IXGBE_READ_REG(hw, IXGBE_VFLREC(reg_offset));
+		break;
+	default:
+		break;
+	}
+
+	if (vflre & (1 << vf_shift)) {
+		ret_val = IXGBE_SUCCESS;
+		IXGBE_WRITE_REG(hw, IXGBE_VFLREC(reg_offset), (1 << vf_shift));
+		hw->mbx.stats.rsts++;
+	}
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_obtain_mbx_lock_pf - obtain mailbox lock
+ *  @hw: pointer to the HW structure
+ *  @vf_number: the VF index
+ *
+ *  return SUCCESS if we obtained the mailbox lock
+ **/
+STATIC s32 ixgbe_obtain_mbx_lock_pf(struct ixgbe_hw *hw, u16 vf_number)
+{
+	s32 ret_val = IXGBE_ERR_MBX;
+	u32 p2v_mailbox;
+
+	DEBUGFUNC("ixgbe_obtain_mbx_lock_pf");
+
+	/* Take ownership of the buffer */
+	IXGBE_WRITE_REG(hw, IXGBE_PFMAILBOX(vf_number), IXGBE_PFMAILBOX_PFU);
+
+	/* reserve mailbox for vf use */
+	p2v_mailbox = IXGBE_READ_REG(hw, IXGBE_PFMAILBOX(vf_number));
+	if (p2v_mailbox & IXGBE_PFMAILBOX_PFU)
+		ret_val = IXGBE_SUCCESS;
+	else
+		ERROR_REPORT2(IXGBE_ERROR_POLLING,
+			   "Failed to obtain mailbox lock for VF%d", vf_number);
+
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_write_mbx_pf - Places a message in the mailbox
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *  @vf_number: the VF index
+ *
+ *  returns SUCCESS if it successfully copied message into the buffer
+ **/
+STATIC s32 ixgbe_write_mbx_pf(struct ixgbe_hw *hw, u32 *msg, u16 size,
+			      u16 vf_number)
+{
+	s32 ret_val;
+	u16 i;
+
+	DEBUGFUNC("ixgbe_write_mbx_pf");
+
+	/* lock the mailbox to prevent pf/vf race condition */
+	ret_val = ixgbe_obtain_mbx_lock_pf(hw, vf_number);
+	if (ret_val)
+		goto out_no_write;
+
+	/* flush msg and acks as we are overwriting the message buffer */
+	ixgbe_check_for_msg_pf(hw, vf_number);
+	ixgbe_check_for_ack_pf(hw, vf_number);
+
+	/* copy the caller specified message to the mailbox memory buffer */
+	for (i = 0; i < size; i++)
+		IXGBE_WRITE_REG_ARRAY(hw, IXGBE_PFMBMEM(vf_number), i, msg[i]);
+
+	/*
+	 * Complete the remaining mailbox data registers with zero to reset
+	 * the data sent in a previous exchange (in either side) with the VF,
+	 * including exchanges performed by another Guest OS to which that VF
+	 * was previously assigned.
+	 */
+	while (i < hw->mbx.size) {
+		IXGBE_WRITE_REG_ARRAY(hw, IXGBE_PFMBMEM(vf_number), i, 0);
+		i++;
+	}
+
+	/* Interrupt VF to tell it a message has been sent and release buffer*/
+	IXGBE_WRITE_REG(hw, IXGBE_PFMAILBOX(vf_number), IXGBE_PFMAILBOX_STS);
+
+	/* update stats */
+	hw->mbx.stats.msgs_tx++;
+
+out_no_write:
+	return ret_val;
+
+}
+
+/**
+ *  ixgbe_read_mbx_pf - Read a message from the mailbox
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *  @vf_number: the VF index
+ *
+ *  This function copies a message from the mailbox buffer to the caller's
+ *  memory buffer.  The presumption is that the caller knows that there was
+ *  a message due to a VF request so no polling for message is needed.
+ **/
+STATIC s32 ixgbe_read_mbx_pf(struct ixgbe_hw *hw, u32 *msg, u16 size,
+			     u16 vf_number)
+{
+	s32 ret_val;
+	u16 i;
+
+	DEBUGFUNC("ixgbe_read_mbx_pf");
+
+	/* lock the mailbox to prevent pf/vf race condition */
+	ret_val = ixgbe_obtain_mbx_lock_pf(hw, vf_number);
+	if (ret_val)
+		goto out_no_read;
+
+	/* copy the message to the mailbox memory buffer */
+	for (i = 0; i < size; i++)
+		msg[i] = IXGBE_READ_REG_ARRAY(hw, IXGBE_PFMBMEM(vf_number), i);
+
+	/* Acknowledge the message and release buffer */
+	IXGBE_WRITE_REG(hw, IXGBE_PFMAILBOX(vf_number), IXGBE_PFMAILBOX_ACK);
+
+	/* update stats */
+	hw->mbx.stats.msgs_rx++;
+
+out_no_read:
+	return ret_val;
+}
+
+/**
+ *  ixgbe_init_mbx_params_pf - set initial values for pf mailbox
+ *  @hw: pointer to the HW structure
+ *
+ *  Initializes the hw->mbx struct to correct values for pf mailbox
+ */
+void ixgbe_init_mbx_params_pf(struct ixgbe_hw *hw)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+
+	if (hw->mac.type != ixgbe_mac_82599EB &&
+	    hw->mac.type != ixgbe_mac_X550 &&
+	    hw->mac.type != ixgbe_mac_X550EM_x &&
+	    hw->mac.type != ixgbe_mac_X550EM_a &&
+	    hw->mac.type != ixgbe_mac_X540)
+		return;
+
+	mbx->timeout = 0;
+	mbx->usec_delay = 0;
+
+	mbx->size = IXGBE_VFMAILBOX_SIZE;
+
+	mbx->ops.read = ixgbe_read_mbx_pf;
+	mbx->ops.write = ixgbe_write_mbx_pf;
+	mbx->ops.read_posted = ixgbe_read_posted_mbx;
+	mbx->ops.write_posted = ixgbe_write_posted_mbx;
+	mbx->ops.check_for_msg = ixgbe_check_for_msg_pf;
+	mbx->ops.check_for_ack = ixgbe_check_for_ack_pf;
+	mbx->ops.check_for_rst = ixgbe_check_for_rst_pf;
+
+	mbx->stats.msgs_tx = 0;
+	mbx->stats.msgs_rx = 0;
+	mbx->stats.reqs = 0;
+	mbx->stats.acks = 0;
+	mbx->stats.rsts = 0;
+}
diff --git a/drivers/net/ixgbe/base/ixgbe_mbx.h b/drivers/net/ixgbe/base/ixgbe_mbx.h
new file mode 100644
index 00000000..4a120a3d
--- /dev/null
+++ b/drivers/net/ixgbe/base/ixgbe_mbx.h
@@ -0,0 +1,154 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+    this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in the
+    documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+    contributors may be used to endorse or promote products derived from
+    this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#ifndef _IXGBE_MBX_H_
+#define _IXGBE_MBX_H_
+
+#include "ixgbe_type.h"
+
+#define IXGBE_VFMAILBOX_SIZE	16 /* 16 32 bit words - 64 bytes */
+#define IXGBE_ERR_MBX		-100
+
+#define IXGBE_VFMAILBOX		0x002FC
+#define IXGBE_VFMBMEM		0x00200
+
+/* Define mailbox register bits */
+#define IXGBE_VFMAILBOX_REQ	0x00000001 /* Request for PF Ready bit */
+#define IXGBE_VFMAILBOX_ACK	0x00000002 /* Ack PF message received */
+#define IXGBE_VFMAILBOX_VFU	0x00000004 /* VF owns the mailbox buffer */
+#define IXGBE_VFMAILBOX_PFU	0x00000008 /* PF owns the mailbox buffer */
+#define IXGBE_VFMAILBOX_PFSTS	0x00000010 /* PF wrote a message in the MB */
+#define IXGBE_VFMAILBOX_PFACK	0x00000020 /* PF ack the previous VF msg */
+#define IXGBE_VFMAILBOX_RSTI	0x00000040 /* PF has reset indication */
+#define IXGBE_VFMAILBOX_RSTD	0x00000080 /* PF has indicated reset done */
+#define IXGBE_VFMAILBOX_R2C_BITS	0x000000B0 /* All read to clear bits */
+
+#define IXGBE_PFMAILBOX_STS	0x00000001 /* Initiate message send to VF */
+#define IXGBE_PFMAILBOX_ACK	0x00000002 /* Ack message recv'd from VF */
+#define IXGBE_PFMAILBOX_VFU	0x00000004 /* VF owns the mailbox buffer */
+#define IXGBE_PFMAILBOX_PFU	0x00000008 /* PF owns the mailbox buffer */
+#define IXGBE_PFMAILBOX_RVFU	0x00000010 /* Reset VFU - used when VF stuck */
+
+#define IXGBE_MBVFICR_VFREQ_MASK	0x0000FFFF /* bits for VF messages */
+#define IXGBE_MBVFICR_VFREQ_VF1		0x00000001 /* bit for VF 1 message */
+#define IXGBE_MBVFICR_VFACK_MASK	0xFFFF0000 /* bits for VF acks */
+#define IXGBE_MBVFICR_VFACK_VF1		0x00010000 /* bit for VF 1 ack */
+
+
+/* If it's a IXGBE_VF_* msg then it originates in the VF and is sent to the
+ * PF.  The reverse is true if it is IXGBE_PF_*.
+ * Message ACK's are the value or'd with 0xF0000000
+ */
+#define IXGBE_VT_MSGTYPE_ACK	0x80000000 /* Messages below or'd with
+					    * this are the ACK */
+#define IXGBE_VT_MSGTYPE_NACK	0x40000000 /* Messages below or'd with
+					    * this are the NACK */
+#define IXGBE_VT_MSGTYPE_CTS	0x20000000 /* Indicates that VF is still
+					    * clear to send requests */
+#define IXGBE_VT_MSGINFO_SHIFT	16
+/* bits 23:16 are used for extra info for certain messages */
+#define IXGBE_VT_MSGINFO_MASK	(0xFF << IXGBE_VT_MSGINFO_SHIFT)
+
+/* definitions to support mailbox API version negotiation */
+
+/*
+ * each element denotes a version of the API; existing numbers may not
+ * change; any additions must go at the end
+ */
+enum ixgbe_pfvf_api_rev {
+	ixgbe_mbox_api_10,	/* API version 1.0, linux/freebsd VF driver */
+	ixgbe_mbox_api_20,	/* API version 2.0, solaris Phase1 VF driver */
+	ixgbe_mbox_api_11,	/* API version 1.1, linux/freebsd VF driver */
+	ixgbe_mbox_api_12,	/* API version 1.2, linux/freebsd VF driver */
+	/* This value should always be last */
+	ixgbe_mbox_api_unknown,	/* indicates that API version is not known */
+};
+
+/* mailbox API, legacy requests */
+#define IXGBE_VF_RESET		0x01 /* VF requests reset */
+#define IXGBE_VF_SET_MAC_ADDR	0x02 /* VF requests PF to set MAC addr */
+#define IXGBE_VF_SET_MULTICAST	0x03 /* VF requests PF to set MC addr */
+#define IXGBE_VF_SET_VLAN	0x04 /* VF requests PF to set VLAN */
+
+/* mailbox API, version 1.0 VF requests */
+#define IXGBE_VF_SET_LPE	0x05 /* VF requests PF to set VMOLR.LPE */
+#define IXGBE_VF_SET_MACVLAN	0x06 /* VF requests PF for unicast filter */
+#define IXGBE_VF_API_NEGOTIATE	0x08 /* negotiate API version */
+
+/* mailbox API, version 1.1 VF requests */
+#define IXGBE_VF_GET_QUEUES	0x09 /* get queue configuration */
+
+/* mailbox API, version 1.2 VF requests */
+#define IXGBE_VF_UPDATE_XCAST_MODE     0x0C
+
+/* GET_QUEUES return data indices within the mailbox */
+#define IXGBE_VF_TX_QUEUES	1	/* number of Tx queues supported */
+#define IXGBE_VF_RX_QUEUES	2	/* number of Rx queues supported */
+#define IXGBE_VF_TRANS_VLAN	3	/* Indication of port vlan */
+#define IXGBE_VF_DEF_QUEUE	4	/* Default queue offset */
+
+/* length of permanent address message returned from PF */
+#define IXGBE_VF_PERMADDR_MSG_LEN	4
+/* word in permanent address message with the current multicast type */
+#define IXGBE_VF_MC_TYPE_WORD		3
+
+#define IXGBE_PF_CONTROL_MSG		0x0100 /* PF control message */
+
+/* mailbox API, version 2.0 VF requests */
+#define IXGBE_VF_API_NEGOTIATE		0x08 /* negotiate API version */
+#define IXGBE_VF_GET_QUEUES		0x09 /* get queue configuration */
+#define IXGBE_VF_ENABLE_MACADDR		0x0A /* enable MAC address */
+#define IXGBE_VF_DISABLE_MACADDR	0x0B /* disable MAC address */
+#define IXGBE_VF_GET_MACADDRS		0x0C /* get all configured MAC addrs */
+#define IXGBE_VF_SET_MCAST_PROMISC	0x0D /* enable multicast promiscuous */
+#define IXGBE_VF_GET_MTU		0x0E /* get bounds on MTU */
+#define IXGBE_VF_SET_MTU		0x0F /* set a specific MTU */
+
+/* mailbox API, version 2.0 PF requests */
+#define IXGBE_PF_TRANSPARENT_VLAN	0x0101 /* enable transparent vlan */
+
+#define IXGBE_VF_MBX_INIT_TIMEOUT	2000 /* number of retries on mailbox */
+#define IXGBE_VF_MBX_INIT_DELAY		500  /* microseconds between retries */
+
+s32 ixgbe_read_mbx(struct ixgbe_hw *, u32 *, u16, u16);
+s32 ixgbe_write_mbx(struct ixgbe_hw *, u32 *, u16, u16);
+s32 ixgbe_read_posted_mbx(struct ixgbe_hw *, u32 *, u16, u16);
+s32 ixgbe_write_posted_mbx(struct ixgbe_hw *, u32 *, u16, u16);
+s32 ixgbe_check_for_msg(struct ixgbe_hw *, u16);
+s32 ixgbe_check_for_ack(struct ixgbe_hw *, u16);
+s32 ixgbe_check_for_rst(struct ixgbe_hw *, u16);
+void ixgbe_init_mbx_ops_generic(struct ixgbe_hw *hw);
+void ixgbe_init_mbx_params_vf(struct ixgbe_hw *);
+void ixgbe_init_mbx_params_pf(struct ixgbe_hw *);
+
+#endif /* _IXGBE_MBX_H_ */
diff --git a/drivers/net/ixgbe/base/ixgbe_osdep.h b/drivers/net/ixgbe/base/ixgbe_osdep.h
new file mode 100644
index 00000000..40b0b512
--- /dev/null
+++ b/drivers/net/ixgbe/base/ixgbe_osdep.h
@@ -0,0 +1,155 @@
+/******************************************************************************
+
+  Copyright (c) 2001-2015, Intel Corporation
+  All rights reserved.
+  
+  Redistribution and use in source and binary forms, with or without 
+  modification, are permitted provided that the following conditions are met:
+  
+   1. Redistributions of source code must retain the above copyright notice, 
+      this list of conditions and the following disclaimer.
+  
+   2. Redistributions in binary form must reproduce the above copyright 
+      notice, this list of conditions and the following disclaimer in the 
+      documentation and/or other materials provided with the distribution.
+  
+   3. Neither the name of the Intel Corporation nor the names of its 
+      contributors may be used to endorse or promote products derived from 
+      this software without specific prior written permission.
+  
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
+  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 
+  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 
+  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 
+  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 
+  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
+  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
+  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+  POSSIBILITY OF SUCH DAMAGE.
+
+******************************************************************************/
+/*$FreeBSD$*/
+
+#ifndef _IXGBE_OS_H_
+#define _IXGBE_OS_H_
+
+#include <string.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdarg.h>
+#include <rte_common.h>
+#include <rte_debug.h>
+#include <rte_cycles.h>
+#include <rte_log.h>
+#include <rte_byteorder.h>
+
+#include "../ixgbe_logs.h"
+#include "../ixgbe_bypass_defines.h"
+
+#define ASSERT(x) if(!(x)) rte_panic("IXGBE: x")
+
+#define DELAY(x) rte_delay_us(x)
+#define usec_delay(x) DELAY(x)
+#define msec_delay(x) DELAY(1000*(x))
+
+#define DEBUGFUNC(F)            DEBUGOUT(F "\n");
+#define DEBUGOUT(S, args...)    PMD_DRV_LOG_RAW(DEBUG, S, ##args)
+#define DEBUGOUT1(S, args...)   DEBUGOUT(S, ##args)
+#define DEBUGOUT2(S, args...)   DEBUGOUT(S, ##args)
+#define DEBUGOUT3(S, args...)   DEBUGOUT(S, ##args)
+#define DEBUGOUT6(S, args...)   DEBUGOUT(S, ##args)
+#define DEBUGOUT7(S, args...)   DEBUGOUT(S, ##args)
+
+#define ERROR_REPORT1(e, S, args...)   DEBUGOUT(S, ##args)
+#define ERROR_REPORT2(e, S, args...)   DEBUGOUT(S, ##args)
+#define ERROR_REPORT3(e, S, args...)   DEBUGOUT(S, ##args)
+
+#define FALSE               0
+#define TRUE                1
+
+#define false               0
+#define true                1
+#define min(a,b)	RTE_MIN(a,b) 
+
+#define EWARN(hw, S, args...)     DEBUGOUT1(S, ##args)
+
+/* Bunch of defines for shared code bogosity */
+#define UNREFERENCED_PARAMETER(_p)  
+#define UNREFERENCED_1PARAMETER(_p) 
+#define UNREFERENCED_2PARAMETER(_p, _q)
+#define UNREFERENCED_3PARAMETER(_p, _q, _r) 
+#define UNREFERENCED_4PARAMETER(_p, _q, _r, _s) 
+
+/* Shared code error reporting */
+enum {
+	IXGBE_ERROR_SOFTWARE,
+	IXGBE_ERROR_POLLING,
+	IXGBE_ERROR_INVALID_STATE,
+	IXGBE_ERROR_UNSUPPORTED,
+	IXGBE_ERROR_ARGUMENT,
+	IXGBE_ERROR_CAUTION,
+};
+
+#define STATIC static
+#define IXGBE_NTOHL(_i)	rte_be_to_cpu_32(_i)
+#define IXGBE_NTOHS(_i)	rte_be_to_cpu_16(_i)
+#define IXGBE_CPU_TO_LE32(_i)  rte_cpu_to_le_32(_i)
+#define IXGBE_LE32_TO_CPUS(_i) rte_le_to_cpu_32(_i)
+#define IXGBE_CPU_TO_BE16(_i)  rte_cpu_to_be_16(_i)
+#define IXGBE_CPU_TO_BE32(_i)  rte_cpu_to_be_32(_i)
+
+typedef uint8_t		u8;
+typedef int8_t		s8;
+typedef uint16_t	u16;
+typedef int16_t		s16;
+typedef uint32_t	u32;
+typedef int32_t		s32;
+typedef uint64_t	u64;
+typedef int		bool;
+
+#define mb()	rte_mb()
+#define wmb()	rte_wmb()
+#define rmb()	rte_rmb()
+
+#define IOMEM
+
+#define prefetch(x) rte_prefetch0(x)
+
+#define IXGBE_PCI_REG(reg) (*((volatile uint32_t *)(reg)))
+
+static inline uint32_t ixgbe_read_addr(volatile void* addr)
+{
+	return rte_le_to_cpu_32(IXGBE_PCI_REG(addr));
+}
+
+#define IXGBE_PCI_REG_WRITE(reg, value) do { \
+	IXGBE_PCI_REG((reg)) = (rte_cpu_to_le_32(value)); \
+} while(0)
+
+#define IXGBE_PCI_REG_ADDR(hw, reg) \
+	((volatile uint32_t *)((char *)(hw)->hw_addr + (reg)))
+
+#define IXGBE_PCI_REG_ARRAY_ADDR(hw, reg, index) \
+	IXGBE_PCI_REG_ADDR((hw), (reg) + ((index) << 2))
+
+/* Not implemented !! */
+#define IXGBE_READ_PCIE_WORD(hw, reg) 0	
+#define IXGBE_WRITE_PCIE_WORD(hw, reg, value) do { } while(0)
+
+#define IXGBE_WRITE_FLUSH(a) IXGBE_READ_REG(a, IXGBE_STATUS)
+
+#define IXGBE_READ_REG(hw, reg) \
+	ixgbe_read_addr(IXGBE_PCI_REG_ADDR((hw), (reg)))
+
+#define IXGBE_WRITE_REG(hw, reg, value) \
+	IXGBE_PCI_REG_WRITE(IXGBE_PCI_REG_ADDR((hw), (reg)), (value))
+
+#define IXGBE_READ_REG_ARRAY(hw, reg, index) \
+	IXGBE_PCI_REG(IXGBE_PCI_REG_ARRAY_ADDR((hw), (reg), (index)))
+
+#define IXGBE_WRITE_REG_ARRAY(hw, reg, index, value) \
+	IXGBE_PCI_REG_WRITE(IXGBE_PCI_REG_ARRAY_ADDR((hw), (reg), (index)), (value))
+
+#endif /* _IXGBE_OS_H_ */
diff --git a/drivers/net/ixgbe/base/ixgbe_phy.c b/drivers/net/ixgbe/base/ixgbe_phy.c
new file mode 100644
index 00000000..6ed685e8
--- /dev/null
+++ b/drivers/net/ixgbe/base/ixgbe_phy.c
@@ -0,0 +1,2687 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+    this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in the
+    documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+    contributors may be used to endorse or promote products derived from
+    this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#include "ixgbe_api.h"
+#include "ixgbe_common.h"
+#include "ixgbe_phy.h"
+
+STATIC void ixgbe_i2c_start(struct ixgbe_hw *hw);
+STATIC void ixgbe_i2c_stop(struct ixgbe_hw *hw);
+STATIC s32 ixgbe_clock_in_i2c_byte(struct ixgbe_hw *hw, u8 *data);
+STATIC s32 ixgbe_clock_out_i2c_byte(struct ixgbe_hw *hw, u8 data);
+STATIC s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw);
+STATIC s32 ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data);
+STATIC s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data);
+STATIC void ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl);
+STATIC void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl);
+STATIC s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data);
+STATIC bool ixgbe_get_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl);
+STATIC s32 ixgbe_read_i2c_sff8472_generic(struct ixgbe_hw *hw, u8 byte_offset,
+					  u8 *sff8472_data);
+
+/**
+ * ixgbe_out_i2c_byte_ack - Send I2C byte with ack
+ * @hw: pointer to the hardware structure
+ * @byte: byte to send
+ *
+ * Returns an error code on error.
+ */
+STATIC s32 ixgbe_out_i2c_byte_ack(struct ixgbe_hw *hw, u8 byte)
+{
+	s32 status;
+
+	status = ixgbe_clock_out_i2c_byte(hw, byte);
+	if (status)
+		return status;
+	return ixgbe_get_i2c_ack(hw);
+}
+
+/**
+ * ixgbe_in_i2c_byte_ack - Receive an I2C byte and send ack
+ * @hw: pointer to the hardware structure
+ * @byte: pointer to a u8 to receive the byte
+ *
+ * Returns an error code on error.
+ */
+STATIC s32 ixgbe_in_i2c_byte_ack(struct ixgbe_hw *hw, u8 *byte)
+{
+	s32 status;
+
+	status = ixgbe_clock_in_i2c_byte(hw, byte);
+	if (status)
+		return status;
+	/* ACK */
+	return ixgbe_clock_out_i2c_bit(hw, false);
+}
+
+/**
+ * ixgbe_ones_comp_byte_add - Perform one's complement addition
+ * @add1 - addend 1
+ * @add2 - addend 2
+ *
+ * Returns one's complement 8-bit sum.
+ */
+STATIC u8 ixgbe_ones_comp_byte_add(u8 add1, u8 add2)
+{
+	u16 sum = add1 + add2;
+
+	sum = (sum & 0xFF) + (sum >> 8);
+	return sum & 0xFF;
+}
+
+/**
+ * ixgbe_read_i2c_combined_generic_int - Perform I2C read combined operation
+ * @hw: pointer to the hardware structure
+ * @addr: I2C bus address to read from
+ * @reg: I2C device register to read from
+ * @val: pointer to location to receive read value
+ * @lock: true if to take and release semaphore
+ *
+ * Returns an error code on error.
+ */
+s32 ixgbe_read_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr, u16 reg,
+					u16 *val, bool lock)
+{
+	u32 swfw_mask = hw->phy.phy_semaphore_mask;
+	int max_retry = 10;
+	int retry = 0;
+	u8 csum_byte;
+	u8 high_bits;
+	u8 low_bits;
+	u8 reg_high;
+	u8 csum;
+
+	if (hw->mac.type >= ixgbe_mac_X550)
+		max_retry = 3;
+	reg_high = ((reg >> 7) & 0xFE) | 1;	/* Indicate read combined */
+	csum = ixgbe_ones_comp_byte_add(reg_high, reg & 0xFF);
+	csum = ~csum;
+	do {
+		if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask))
+			return IXGBE_ERR_SWFW_SYNC;
+		ixgbe_i2c_start(hw);
+		/* Device Address and write indication */
+		if (ixgbe_out_i2c_byte_ack(hw, addr))
+			goto fail;
+		/* Write bits 14:8 */
+		if (ixgbe_out_i2c_byte_ack(hw, reg_high))
+			goto fail;
+		/* Write bits 7:0 */
+		if (ixgbe_out_i2c_byte_ack(hw, reg & 0xFF))
+			goto fail;
+		/* Write csum */
+		if (ixgbe_out_i2c_byte_ack(hw, csum))
+			goto fail;
+		/* Re-start condition */
+		ixgbe_i2c_start(hw);
+		/* Device Address and read indication */
+		if (ixgbe_out_i2c_byte_ack(hw, addr | 1))
+			goto fail;
+		/* Get upper bits */
+		if (ixgbe_in_i2c_byte_ack(hw, &high_bits))
+			goto fail;
+		/* Get low bits */
+		if (ixgbe_in_i2c_byte_ack(hw, &low_bits))
+			goto fail;
+		/* Get csum */
+		if (ixgbe_clock_in_i2c_byte(hw, &csum_byte))
+			goto fail;
+		/* NACK */
+		if (ixgbe_clock_out_i2c_bit(hw, false))
+			goto fail;
+		ixgbe_i2c_stop(hw);
+		if (lock)
+			hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+		*val = (high_bits << 8) | low_bits;
+		return 0;
+
+fail:
+		ixgbe_i2c_bus_clear(hw);
+		if (lock)
+			hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+		retry++;
+		if (retry < max_retry)
+			DEBUGOUT("I2C byte read combined error - Retrying.\n");
+		else
+			DEBUGOUT("I2C byte read combined error.\n");
+	} while (retry < max_retry);
+
+	return IXGBE_ERR_I2C;
+}
+
+/**
+ * ixgbe_write_i2c_combined_generic_int - Perform I2C write combined operation
+ * @hw: pointer to the hardware structure
+ * @addr: I2C bus address to write to
+ * @reg: I2C device register to write to
+ * @val: value to write
+ * @lock: true if to take and release semaphore
+ *
+ * Returns an error code on error.
+ */
+s32 ixgbe_write_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr, u16 reg,
+					 u16 val, bool lock)
+{
+	u32 swfw_mask = hw->phy.phy_semaphore_mask;
+	int max_retry = 1;
+	int retry = 0;
+	u8 reg_high;
+	u8 csum;
+
+	reg_high = (reg >> 7) & 0xFE;	/* Indicate write combined */
+	csum = ixgbe_ones_comp_byte_add(reg_high, reg & 0xFF);
+	csum = ixgbe_ones_comp_byte_add(csum, val >> 8);
+	csum = ixgbe_ones_comp_byte_add(csum, val & 0xFF);
+	csum = ~csum;
+	do {
+		if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask))
+			return IXGBE_ERR_SWFW_SYNC;
+		ixgbe_i2c_start(hw);
+		/* Device Address and write indication */
+		if (ixgbe_out_i2c_byte_ack(hw, addr))
+			goto fail;
+		/* Write bits 14:8 */
+		if (ixgbe_out_i2c_byte_ack(hw, reg_high))
+			goto fail;
+		/* Write bits 7:0 */
+		if (ixgbe_out_i2c_byte_ack(hw, reg & 0xFF))
+			goto fail;
+		/* Write data 15:8 */
+		if (ixgbe_out_i2c_byte_ack(hw, val >> 8))
+			goto fail;
+		/* Write data 7:0 */
+		if (ixgbe_out_i2c_byte_ack(hw, val & 0xFF))
+			goto fail;
+		/* Write csum */
+		if (ixgbe_out_i2c_byte_ack(hw, csum))
+			goto fail;
+		ixgbe_i2c_stop(hw);
+		if (lock)
+			hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+		return 0;
+
+fail:
+		ixgbe_i2c_bus_clear(hw);
+		if (lock)
+			hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+		retry++;
+		if (retry < max_retry)
+			DEBUGOUT("I2C byte write combined error - Retrying.\n");
+		else
+			DEBUGOUT("I2C byte write combined error.\n");
+	} while (retry < max_retry);
+
+	return IXGBE_ERR_I2C;
+}
+
+/**
+ *  ixgbe_init_phy_ops_generic - Inits PHY function ptrs
+ *  @hw: pointer to the hardware structure
+ *
+ *  Initialize the function pointers.
+ **/
+s32 ixgbe_init_phy_ops_generic(struct ixgbe_hw *hw)
+{
+	struct ixgbe_phy_info *phy = &hw->phy;
+
+	DEBUGFUNC("ixgbe_init_phy_ops_generic");
+
+	/* PHY */
+	phy->ops.identify = ixgbe_identify_phy_generic;
+	phy->ops.reset = ixgbe_reset_phy_generic;
+	phy->ops.read_reg = ixgbe_read_phy_reg_generic;
+	phy->ops.write_reg = ixgbe_write_phy_reg_generic;
+	phy->ops.read_reg_mdi = ixgbe_read_phy_reg_mdi;
+	phy->ops.write_reg_mdi = ixgbe_write_phy_reg_mdi;
+	phy->ops.setup_link = ixgbe_setup_phy_link_generic;
+	phy->ops.setup_link_speed = ixgbe_setup_phy_link_speed_generic;
+	phy->ops.check_link = NULL;
+	phy->ops.get_firmware_version = ixgbe_get_phy_firmware_version_generic;
+	phy->ops.read_i2c_byte = ixgbe_read_i2c_byte_generic;
+	phy->ops.write_i2c_byte = ixgbe_write_i2c_byte_generic;
+	phy->ops.read_i2c_sff8472 = ixgbe_read_i2c_sff8472_generic;
+	phy->ops.read_i2c_eeprom = ixgbe_read_i2c_eeprom_generic;
+	phy->ops.write_i2c_eeprom = ixgbe_write_i2c_eeprom_generic;
+	phy->ops.i2c_bus_clear = ixgbe_i2c_bus_clear;
+	phy->ops.identify_sfp = ixgbe_identify_module_generic;
+	phy->sfp_type = ixgbe_sfp_type_unknown;
+	phy->ops.read_i2c_byte_unlocked = ixgbe_read_i2c_byte_generic_unlocked;
+	phy->ops.write_i2c_byte_unlocked =
+				ixgbe_write_i2c_byte_generic_unlocked;
+	phy->ops.check_overtemp = ixgbe_tn_check_overtemp;
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_identify_phy_generic - Get physical layer module
+ *  @hw: pointer to hardware structure
+ *
+ *  Determines the physical layer module found on the current adapter.
+ **/
+s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw)
+{
+	s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
+	u32 phy_addr;
+	u16 ext_ability = 0;
+
+	DEBUGFUNC("ixgbe_identify_phy_generic");
+
+	if (!hw->phy.phy_semaphore_mask) {
+		if (hw->bus.lan_id)
+			hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY1_SM;
+		else
+			hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY0_SM;
+	}
+
+	if (hw->phy.type == ixgbe_phy_unknown) {
+		for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) {
+			if (ixgbe_validate_phy_addr(hw, phy_addr)) {
+				hw->phy.addr = phy_addr;
+				ixgbe_get_phy_id(hw);
+				hw->phy.type =
+					ixgbe_get_phy_type_from_id(hw->phy.id);
+
+				if (hw->phy.type == ixgbe_phy_unknown) {
+					hw->phy.ops.read_reg(hw,
+						  IXGBE_MDIO_PHY_EXT_ABILITY,
+						  IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+						  &ext_ability);
+					if (ext_ability &
+					    (IXGBE_MDIO_PHY_10GBASET_ABILITY |
+					     IXGBE_MDIO_PHY_1000BASET_ABILITY))
+						hw->phy.type =
+							 ixgbe_phy_cu_unknown;
+					else
+						hw->phy.type =
+							 ixgbe_phy_generic;
+				}
+
+				status = IXGBE_SUCCESS;
+				break;
+			}
+		}
+
+		/* Certain media types do not have a phy so an address will not
+		 * be found and the code will take this path.  Caller has to
+		 * decide if it is an error or not.
+		 */
+		if (status != IXGBE_SUCCESS) {
+			hw->phy.addr = 0;
+		}
+	} else {
+		status = IXGBE_SUCCESS;
+	}
+
+	return status;
+}
+
+/**
+ * ixgbe_check_reset_blocked - check status of MNG FW veto bit
+ * @hw: pointer to the hardware structure
+ *
+ * This function checks the MMNGC.MNG_VETO bit to see if there are
+ * any constraints on link from manageability.  For MAC's that don't
+ * have this bit just return faluse since the link can not be blocked
+ * via this method.
+ **/
+s32 ixgbe_check_reset_blocked(struct ixgbe_hw *hw)
+{
+	u32 mmngc;
+
+	DEBUGFUNC("ixgbe_check_reset_blocked");
+
+	/* If we don't have this bit, it can't be blocking */
+	if (hw->mac.type == ixgbe_mac_82598EB)
+		return false;
+
+	mmngc = IXGBE_READ_REG(hw, IXGBE_MMNGC);
+	if (mmngc & IXGBE_MMNGC_MNG_VETO) {
+		ERROR_REPORT1(IXGBE_ERROR_SOFTWARE,
+			      "MNG_VETO bit detected.\n");
+		return true;
+	}
+
+	return false;
+}
+
+/**
+ *  ixgbe_validate_phy_addr - Determines phy address is valid
+ *  @hw: pointer to hardware structure
+ *
+ **/
+bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr)
+{
+	u16 phy_id = 0;
+	bool valid = false;
+
+	DEBUGFUNC("ixgbe_validate_phy_addr");
+
+	hw->phy.addr = phy_addr;
+	hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_HIGH,
+			     IXGBE_MDIO_PMA_PMD_DEV_TYPE, &phy_id);
+
+	if (phy_id != 0xFFFF && phy_id != 0x0)
+		valid = true;
+
+	return valid;
+}
+
+/**
+ *  ixgbe_get_phy_id - Get the phy type
+ *  @hw: pointer to hardware structure
+ *
+ **/
+s32 ixgbe_get_phy_id(struct ixgbe_hw *hw)
+{
+	u32 status;
+	u16 phy_id_high = 0;
+	u16 phy_id_low = 0;
+
+	DEBUGFUNC("ixgbe_get_phy_id");
+
+	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_HIGH,
+				      IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+				      &phy_id_high);
+
+	if (status == IXGBE_SUCCESS) {
+		hw->phy.id = (u32)(phy_id_high << 16);
+		status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_LOW,
+					      IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+					      &phy_id_low);
+		hw->phy.id |= (u32)(phy_id_low & IXGBE_PHY_REVISION_MASK);
+		hw->phy.revision = (u32)(phy_id_low & ~IXGBE_PHY_REVISION_MASK);
+	}
+	return status;
+}
+
+/**
+ *  ixgbe_get_phy_type_from_id - Get the phy type
+ *  @phy_id: PHY ID information
+ *
+ **/
+enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id)
+{
+	enum ixgbe_phy_type phy_type;
+
+	DEBUGFUNC("ixgbe_get_phy_type_from_id");
+
+	switch (phy_id) {
+	case TN1010_PHY_ID:
+		phy_type = ixgbe_phy_tn;
+		break;
+	case X550_PHY_ID1:
+	case X550_PHY_ID2:
+	case X550_PHY_ID3:
+	case X540_PHY_ID:
+		phy_type = ixgbe_phy_aq;
+		break;
+	case QT2022_PHY_ID:
+		phy_type = ixgbe_phy_qt;
+		break;
+	case ATH_PHY_ID:
+		phy_type = ixgbe_phy_nl;
+		break;
+	case X557_PHY_ID:
+		phy_type = ixgbe_phy_x550em_ext_t;
+		break;
+	default:
+		phy_type = ixgbe_phy_unknown;
+		break;
+	}
+	return phy_type;
+}
+
+/**
+ *  ixgbe_reset_phy_generic - Performs a PHY reset
+ *  @hw: pointer to hardware structure
+ **/
+s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw)
+{
+	u32 i;
+	u16 ctrl = 0;
+	s32 status = IXGBE_SUCCESS;
+
+	DEBUGFUNC("ixgbe_reset_phy_generic");
+
+	if (hw->phy.type == ixgbe_phy_unknown)
+		status = ixgbe_identify_phy_generic(hw);
+
+	if (status != IXGBE_SUCCESS || hw->phy.type == ixgbe_phy_none)
+		goto out;
+
+	/* Don't reset PHY if it's shut down due to overtemp. */
+	if (!hw->phy.reset_if_overtemp &&
+	    (IXGBE_ERR_OVERTEMP == hw->phy.ops.check_overtemp(hw)))
+		goto out;
+
+	/* Blocked by MNG FW so bail */
+	if (ixgbe_check_reset_blocked(hw))
+		goto out;
+
+	/*
+	 * Perform soft PHY reset to the PHY_XS.
+	 * This will cause a soft reset to the PHY
+	 */
+	hw->phy.ops.write_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
+			      IXGBE_MDIO_PHY_XS_DEV_TYPE,
+			      IXGBE_MDIO_PHY_XS_RESET);
+
+	/*
+	 * Poll for reset bit to self-clear indicating reset is complete.
+	 * Some PHYs could take up to 3 seconds to complete and need about
+	 * 1.7 usec delay after the reset is complete.
+	 */
+	for (i = 0; i < 30; i++) {
+		msec_delay(100);
+		hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
+				     IXGBE_MDIO_PHY_XS_DEV_TYPE, &ctrl);
+		if (!(ctrl & IXGBE_MDIO_PHY_XS_RESET)) {
+			usec_delay(2);
+			break;
+		}
+	}
+
+	if (ctrl & IXGBE_MDIO_PHY_XS_RESET) {
+		status = IXGBE_ERR_RESET_FAILED;
+		ERROR_REPORT1(IXGBE_ERROR_POLLING,
+			     "PHY reset polling failed to complete.\n");
+	}
+
+out:
+	return status;
+}
+
+/**
+ *  ixgbe_read_phy_mdi - Reads a value from a specified PHY register without
+ *  the SWFW lock
+ *  @hw: pointer to hardware structure
+ *  @reg_addr: 32 bit address of PHY register to read
+ *  @phy_data: Pointer to read data from PHY register
+ **/
+s32 ixgbe_read_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
+		       u16 *phy_data)
+{
+	u32 i, data, command;
+
+	/* Setup and write the address cycle command */
+	command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT)  |
+		   (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
+		   (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+		   (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
+
+	IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
+
+	/*
+	 * Check every 10 usec to see if the address cycle completed.
+	 * The MDI Command bit will clear when the operation is
+	 * complete
+	 */
+	for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
+		usec_delay(10);
+
+		command = IXGBE_READ_REG(hw, IXGBE_MSCA);
+		if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
+				break;
+	}
+
+
+	if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
+		ERROR_REPORT1(IXGBE_ERROR_POLLING, "PHY address command did not complete.\n");
+		return IXGBE_ERR_PHY;
+	}
+
+	/*
+	 * Address cycle complete, setup and write the read
+	 * command
+	 */
+	command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT)  |
+		   (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
+		   (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+		   (IXGBE_MSCA_READ | IXGBE_MSCA_MDI_COMMAND));
+
+	IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
+
+	/*
+	 * Check every 10 usec to see if the address cycle
+	 * completed. The MDI Command bit will clear when the
+	 * operation is complete
+	 */
+	for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
+		usec_delay(10);
+
+		command = IXGBE_READ_REG(hw, IXGBE_MSCA);
+		if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
+			break;
+	}
+
+	if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
+		ERROR_REPORT1(IXGBE_ERROR_POLLING, "PHY read command didn't complete\n");
+		return IXGBE_ERR_PHY;
+	}
+
+	/*
+	 * Read operation is complete.  Get the data
+	 * from MSRWD
+	 */
+	data = IXGBE_READ_REG(hw, IXGBE_MSRWD);
+	data >>= IXGBE_MSRWD_READ_DATA_SHIFT;
+	*phy_data = (u16)(data);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_read_phy_reg_generic - Reads a value from a specified PHY register
+ *  using the SWFW lock - this function is needed in most cases
+ *  @hw: pointer to hardware structure
+ *  @reg_addr: 32 bit address of PHY register to read
+ *  @phy_data: Pointer to read data from PHY register
+ **/
+s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
+			       u32 device_type, u16 *phy_data)
+{
+	s32 status;
+	u32 gssr = hw->phy.phy_semaphore_mask;
+
+	DEBUGFUNC("ixgbe_read_phy_reg_generic");
+
+	if (hw->mac.ops.acquire_swfw_sync(hw, gssr) == IXGBE_SUCCESS) {
+		status = ixgbe_read_phy_reg_mdi(hw, reg_addr, device_type,
+						phy_data);
+		hw->mac.ops.release_swfw_sync(hw, gssr);
+	} else {
+		status = IXGBE_ERR_SWFW_SYNC;
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_write_phy_reg_mdi - Writes a value to specified PHY register
+ *  without SWFW lock
+ *  @hw: pointer to hardware structure
+ *  @reg_addr: 32 bit PHY register to write
+ *  @device_type: 5 bit device type
+ *  @phy_data: Data to write to the PHY register
+ **/
+s32 ixgbe_write_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr,
+				u32 device_type, u16 phy_data)
+{
+	u32 i, command;
+
+	/* Put the data in the MDI single read and write data register*/
+	IXGBE_WRITE_REG(hw, IXGBE_MSRWD, (u32)phy_data);
+
+	/* Setup and write the address cycle command */
+	command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT)  |
+		   (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
+		   (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+		   (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
+
+	IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
+
+	/*
+	 * Check every 10 usec to see if the address cycle completed.
+	 * The MDI Command bit will clear when the operation is
+	 * complete
+	 */
+	for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
+		usec_delay(10);
+
+		command = IXGBE_READ_REG(hw, IXGBE_MSCA);
+		if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
+			break;
+	}
+
+	if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
+		ERROR_REPORT1(IXGBE_ERROR_POLLING, "PHY address cmd didn't complete\n");
+		return IXGBE_ERR_PHY;
+	}
+
+	/*
+	 * Address cycle complete, setup and write the write
+	 * command
+	 */
+	command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT)  |
+		   (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
+		   (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+		   (IXGBE_MSCA_WRITE | IXGBE_MSCA_MDI_COMMAND));
+
+	IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
+
+	/*
+	 * Check every 10 usec to see if the address cycle
+	 * completed. The MDI Command bit will clear when the
+	 * operation is complete
+	 */
+	for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
+		usec_delay(10);
+
+		command = IXGBE_READ_REG(hw, IXGBE_MSCA);
+		if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
+			break;
+	}
+
+	if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
+		ERROR_REPORT1(IXGBE_ERROR_POLLING, "PHY write cmd didn't complete\n");
+		return IXGBE_ERR_PHY;
+	}
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_write_phy_reg_generic - Writes a value to specified PHY register
+ *  using SWFW lock- this function is needed in most cases
+ *  @hw: pointer to hardware structure
+ *  @reg_addr: 32 bit PHY register to write
+ *  @device_type: 5 bit device type
+ *  @phy_data: Data to write to the PHY register
+ **/
+s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
+				u32 device_type, u16 phy_data)
+{
+	s32 status;
+	u32 gssr = hw->phy.phy_semaphore_mask;
+
+	DEBUGFUNC("ixgbe_write_phy_reg_generic");
+
+	if (hw->mac.ops.acquire_swfw_sync(hw, gssr) == IXGBE_SUCCESS) {
+		status = ixgbe_write_phy_reg_mdi(hw, reg_addr, device_type,
+						 phy_data);
+		hw->mac.ops.release_swfw_sync(hw, gssr);
+	} else {
+		status = IXGBE_ERR_SWFW_SYNC;
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_setup_phy_link_generic - Set and restart auto-neg
+ *  @hw: pointer to hardware structure
+ *
+ *  Restart auto-negotiation and PHY and waits for completion.
+ **/
+s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw)
+{
+	s32 status = IXGBE_SUCCESS;
+	u16 autoneg_reg = IXGBE_MII_AUTONEG_REG;
+	bool autoneg = false;
+	ixgbe_link_speed speed;
+
+	DEBUGFUNC("ixgbe_setup_phy_link_generic");
+
+	ixgbe_get_copper_link_capabilities_generic(hw, &speed, &autoneg);
+
+	if (speed & IXGBE_LINK_SPEED_10GB_FULL) {
+		/* Set or unset auto-negotiation 10G advertisement */
+		hw->phy.ops.read_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG,
+				     IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+				     &autoneg_reg);
+
+		autoneg_reg &= ~IXGBE_MII_10GBASE_T_ADVERTISE;
+		if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL)
+			autoneg_reg |= IXGBE_MII_10GBASE_T_ADVERTISE;
+
+		hw->phy.ops.write_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG,
+				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+				      autoneg_reg);
+	}
+
+	if (hw->mac.type == ixgbe_mac_X550) {
+		if (speed & IXGBE_LINK_SPEED_5GB_FULL) {
+			/* Set or unset auto-negotiation 5G advertisement */
+			hw->phy.ops.read_reg(hw,
+				IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
+				IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+				&autoneg_reg);
+
+			autoneg_reg &= ~IXGBE_MII_5GBASE_T_ADVERTISE;
+			if (hw->phy.autoneg_advertised &
+			     IXGBE_LINK_SPEED_5GB_FULL)
+				autoneg_reg |= IXGBE_MII_5GBASE_T_ADVERTISE;
+
+			hw->phy.ops.write_reg(hw,
+				IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
+				IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+				autoneg_reg);
+		}
+
+		if (speed & IXGBE_LINK_SPEED_2_5GB_FULL) {
+			/* Set or unset auto-negotiation 2.5G advertisement */
+			hw->phy.ops.read_reg(hw,
+				IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
+				IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+				&autoneg_reg);
+
+			autoneg_reg &= ~IXGBE_MII_2_5GBASE_T_ADVERTISE;
+			if (hw->phy.autoneg_advertised &
+			    IXGBE_LINK_SPEED_2_5GB_FULL)
+				autoneg_reg |= IXGBE_MII_2_5GBASE_T_ADVERTISE;
+
+			hw->phy.ops.write_reg(hw,
+				IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
+				IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+				autoneg_reg);
+		}
+	}
+
+	if (speed & IXGBE_LINK_SPEED_1GB_FULL) {
+		/* Set or unset auto-negotiation 1G advertisement */
+		hw->phy.ops.read_reg(hw,
+				     IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
+				     IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+				     &autoneg_reg);
+
+		autoneg_reg &= ~IXGBE_MII_1GBASE_T_ADVERTISE;
+		if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL)
+			autoneg_reg |= IXGBE_MII_1GBASE_T_ADVERTISE;
+
+		hw->phy.ops.write_reg(hw,
+				      IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
+				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+				      autoneg_reg);
+	}
+
+	if (speed & IXGBE_LINK_SPEED_100_FULL) {
+		/* Set or unset auto-negotiation 100M advertisement */
+		hw->phy.ops.read_reg(hw, IXGBE_MII_AUTONEG_ADVERTISE_REG,
+				     IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+				     &autoneg_reg);
+
+		autoneg_reg &= ~(IXGBE_MII_100BASE_T_ADVERTISE |
+				 IXGBE_MII_100BASE_T_ADVERTISE_HALF);
+		if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL)
+			autoneg_reg |= IXGBE_MII_100BASE_T_ADVERTISE;
+
+		hw->phy.ops.write_reg(hw, IXGBE_MII_AUTONEG_ADVERTISE_REG,
+				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+				      autoneg_reg);
+	}
+
+	/* Blocked by MNG FW so don't reset PHY */
+	if (ixgbe_check_reset_blocked(hw))
+		return status;
+
+	/* Restart PHY auto-negotiation. */
+	hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
+			     IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg);
+
+	autoneg_reg |= IXGBE_MII_RESTART;
+
+	hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
+			      IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg);
+
+	return status;
+}
+
+/**
+ *  ixgbe_setup_phy_link_speed_generic - Sets the auto advertised capabilities
+ *  @hw: pointer to hardware structure
+ *  @speed: new link speed
+ **/
+s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
+				       ixgbe_link_speed speed,
+				       bool autoneg_wait_to_complete)
+{
+	UNREFERENCED_1PARAMETER(autoneg_wait_to_complete);
+
+	DEBUGFUNC("ixgbe_setup_phy_link_speed_generic");
+
+	/*
+	 * Clear autoneg_advertised and set new values based on input link
+	 * speed.
+	 */
+	hw->phy.autoneg_advertised = 0;
+
+	if (speed & IXGBE_LINK_SPEED_10GB_FULL)
+		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
+
+	if (speed & IXGBE_LINK_SPEED_5GB_FULL)
+		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_5GB_FULL;
+
+	if (speed & IXGBE_LINK_SPEED_2_5GB_FULL)
+		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_2_5GB_FULL;
+
+	if (speed & IXGBE_LINK_SPEED_1GB_FULL)
+		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
+
+	if (speed & IXGBE_LINK_SPEED_100_FULL)
+		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_100_FULL;
+
+	/* Setup link based on the new speed settings */
+	ixgbe_setup_phy_link(hw);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_get_copper_speeds_supported - Get copper link speeds from phy
+ * @hw: pointer to hardware structure
+ *
+ * Determines the supported link capabilities by reading the PHY auto
+ * negotiation register.
+ **/
+static s32 ixgbe_get_copper_speeds_supported(struct ixgbe_hw *hw)
+{
+	s32 status;
+	u16 speed_ability;
+
+	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_SPEED_ABILITY,
+				      IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+				      &speed_ability);
+	if (status)
+		return status;
+
+	if (speed_ability & IXGBE_MDIO_PHY_SPEED_10G)
+		hw->phy.speeds_supported |= IXGBE_LINK_SPEED_10GB_FULL;
+	if (speed_ability & IXGBE_MDIO_PHY_SPEED_1G)
+		hw->phy.speeds_supported |= IXGBE_LINK_SPEED_1GB_FULL;
+	if (speed_ability & IXGBE_MDIO_PHY_SPEED_100M)
+		hw->phy.speeds_supported |= IXGBE_LINK_SPEED_100_FULL;
+
+	switch (hw->mac.type) {
+	case ixgbe_mac_X550:
+		hw->phy.speeds_supported |= IXGBE_LINK_SPEED_2_5GB_FULL;
+		hw->phy.speeds_supported |= IXGBE_LINK_SPEED_5GB_FULL;
+		break;
+	case ixgbe_mac_X550EM_x:
+		hw->phy.speeds_supported &= ~IXGBE_LINK_SPEED_100_FULL;
+		break;
+	default:
+		break;
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_get_copper_link_capabilities_generic - Determines link capabilities
+ *  @hw: pointer to hardware structure
+ *  @speed: pointer to link speed
+ *  @autoneg: boolean auto-negotiation value
+ **/
+s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw,
+					       ixgbe_link_speed *speed,
+					       bool *autoneg)
+{
+	s32 status = IXGBE_SUCCESS;
+
+	DEBUGFUNC("ixgbe_get_copper_link_capabilities_generic");
+
+	*autoneg = true;
+	if (!hw->phy.speeds_supported)
+		status = ixgbe_get_copper_speeds_supported(hw);
+
+	*speed = hw->phy.speeds_supported;
+	return status;
+}
+
+/**
+ *  ixgbe_check_phy_link_tnx - Determine link and speed status
+ *  @hw: pointer to hardware structure
+ *
+ *  Reads the VS1 register to determine if link is up and the current speed for
+ *  the PHY.
+ **/
+s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+			     bool *link_up)
+{
+	s32 status = IXGBE_SUCCESS;
+	u32 time_out;
+	u32 max_time_out = 10;
+	u16 phy_link = 0;
+	u16 phy_speed = 0;
+	u16 phy_data = 0;
+
+	DEBUGFUNC("ixgbe_check_phy_link_tnx");
+
+	/* Initialize speed and link to default case */
+	*link_up = false;
+	*speed = IXGBE_LINK_SPEED_10GB_FULL;
+
+	/*
+	 * Check current speed and link status of the PHY register.
+	 * This is a vendor specific register and may have to
+	 * be changed for other copper PHYs.
+	 */
+	for (time_out = 0; time_out < max_time_out; time_out++) {
+		usec_delay(10);
+		status = hw->phy.ops.read_reg(hw,
+					IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS,
+					IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+					&phy_data);
+		phy_link = phy_data & IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS;
+		phy_speed = phy_data &
+				 IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS;
+		if (phy_link == IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS) {
+			*link_up = true;
+			if (phy_speed ==
+			    IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS)
+				*speed = IXGBE_LINK_SPEED_1GB_FULL;
+			break;
+		}
+	}
+
+	return status;
+}
+
+/**
+ *	ixgbe_setup_phy_link_tnx - Set and restart auto-neg
+ *	@hw: pointer to hardware structure
+ *
+ *	Restart auto-negotiation and PHY and waits for completion.
+ **/
+s32 ixgbe_setup_phy_link_tnx(struct ixgbe_hw *hw)
+{
+	s32 status = IXGBE_SUCCESS;
+	u16 autoneg_reg = IXGBE_MII_AUTONEG_REG;
+	bool autoneg = false;
+	ixgbe_link_speed speed;
+
+	DEBUGFUNC("ixgbe_setup_phy_link_tnx");
+
+	ixgbe_get_copper_link_capabilities_generic(hw, &speed, &autoneg);
+
+	if (speed & IXGBE_LINK_SPEED_10GB_FULL) {
+		/* Set or unset auto-negotiation 10G advertisement */
+		hw->phy.ops.read_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG,
+				     IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+				     &autoneg_reg);
+
+		autoneg_reg &= ~IXGBE_MII_10GBASE_T_ADVERTISE;
+		if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL)
+			autoneg_reg |= IXGBE_MII_10GBASE_T_ADVERTISE;
+
+		hw->phy.ops.write_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG,
+				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+				      autoneg_reg);
+	}
+
+	if (speed & IXGBE_LINK_SPEED_1GB_FULL) {
+		/* Set or unset auto-negotiation 1G advertisement */
+		hw->phy.ops.read_reg(hw, IXGBE_MII_AUTONEG_XNP_TX_REG,
+				     IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+				     &autoneg_reg);
+
+		autoneg_reg &= ~IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX;
+		if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL)
+			autoneg_reg |= IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX;
+
+		hw->phy.ops.write_reg(hw, IXGBE_MII_AUTONEG_XNP_TX_REG,
+				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+				      autoneg_reg);
+	}
+
+	if (speed & IXGBE_LINK_SPEED_100_FULL) {
+		/* Set or unset auto-negotiation 100M advertisement */
+		hw->phy.ops.read_reg(hw, IXGBE_MII_AUTONEG_ADVERTISE_REG,
+				     IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+				     &autoneg_reg);
+
+		autoneg_reg &= ~IXGBE_MII_100BASE_T_ADVERTISE;
+		if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL)
+			autoneg_reg |= IXGBE_MII_100BASE_T_ADVERTISE;
+
+		hw->phy.ops.write_reg(hw, IXGBE_MII_AUTONEG_ADVERTISE_REG,
+				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+				      autoneg_reg);
+	}
+
+	/* Blocked by MNG FW so don't reset PHY */
+	if (ixgbe_check_reset_blocked(hw))
+		return status;
+
+	/* Restart PHY auto-negotiation. */
+	hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
+			     IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg);
+
+	autoneg_reg |= IXGBE_MII_RESTART;
+
+	hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
+			      IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg);
+
+	return status;
+}
+
+/**
+ *  ixgbe_get_phy_firmware_version_tnx - Gets the PHY Firmware Version
+ *  @hw: pointer to hardware structure
+ *  @firmware_version: pointer to the PHY Firmware Version
+ **/
+s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw,
+				       u16 *firmware_version)
+{
+	s32 status;
+
+	DEBUGFUNC("ixgbe_get_phy_firmware_version_tnx");
+
+	status = hw->phy.ops.read_reg(hw, TNX_FW_REV,
+				      IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+				      firmware_version);
+
+	return status;
+}
+
+/**
+ *  ixgbe_get_phy_firmware_version_generic - Gets the PHY Firmware Version
+ *  @hw: pointer to hardware structure
+ *  @firmware_version: pointer to the PHY Firmware Version
+ **/
+s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw,
+					   u16 *firmware_version)
+{
+	s32 status;
+
+	DEBUGFUNC("ixgbe_get_phy_firmware_version_generic");
+
+	status = hw->phy.ops.read_reg(hw, AQ_FW_REV,
+				      IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+				      firmware_version);
+
+	return status;
+}
+
+/**
+ *  ixgbe_reset_phy_nl - Performs a PHY reset
+ *  @hw: pointer to hardware structure
+ **/
+s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw)
+{
+	u16 phy_offset, control, eword, edata, block_crc;
+	bool end_data = false;
+	u16 list_offset, data_offset;
+	u16 phy_data = 0;
+	s32 ret_val = IXGBE_SUCCESS;
+	u32 i;
+
+	DEBUGFUNC("ixgbe_reset_phy_nl");
+
+	/* Blocked by MNG FW so bail */
+	if (ixgbe_check_reset_blocked(hw))
+		goto out;
+
+	hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
+			     IXGBE_MDIO_PHY_XS_DEV_TYPE, &phy_data);
+
+	/* reset the PHY and poll for completion */
+	hw->phy.ops.write_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
+			      IXGBE_MDIO_PHY_XS_DEV_TYPE,
+			      (phy_data | IXGBE_MDIO_PHY_XS_RESET));
+
+	for (i = 0; i < 100; i++) {
+		hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
+				     IXGBE_MDIO_PHY_XS_DEV_TYPE, &phy_data);
+		if ((phy_data & IXGBE_MDIO_PHY_XS_RESET) == 0)
+			break;
+		msec_delay(10);
+	}
+
+	if ((phy_data & IXGBE_MDIO_PHY_XS_RESET) != 0) {
+		DEBUGOUT("PHY reset did not complete.\n");
+		ret_val = IXGBE_ERR_PHY;
+		goto out;
+	}
+
+	/* Get init offsets */
+	ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset,
+						      &data_offset);
+	if (ret_val != IXGBE_SUCCESS)
+		goto out;
+
+	ret_val = hw->eeprom.ops.read(hw, data_offset, &block_crc);
+	data_offset++;
+	while (!end_data) {
+		/*
+		 * Read control word from PHY init contents offset
+		 */
+		ret_val = hw->eeprom.ops.read(hw, data_offset, &eword);
+		if (ret_val)
+			goto err_eeprom;
+		control = (eword & IXGBE_CONTROL_MASK_NL) >>
+			   IXGBE_CONTROL_SHIFT_NL;
+		edata = eword & IXGBE_DATA_MASK_NL;
+		switch (control) {
+		case IXGBE_DELAY_NL:
+			data_offset++;
+			DEBUGOUT1("DELAY: %d MS\n", edata);
+			msec_delay(edata);
+			break;
+		case IXGBE_DATA_NL:
+			DEBUGOUT("DATA:\n");
+			data_offset++;
+			ret_val = hw->eeprom.ops.read(hw, data_offset,
+						      &phy_offset);
+			if (ret_val)
+				goto err_eeprom;
+			data_offset++;
+			for (i = 0; i < edata; i++) {
+				ret_val = hw->eeprom.ops.read(hw, data_offset,
+							      &eword);
+				if (ret_val)
+					goto err_eeprom;
+				hw->phy.ops.write_reg(hw, phy_offset,
+						      IXGBE_TWINAX_DEV, eword);
+				DEBUGOUT2("Wrote %4.4x to %4.4x\n", eword,
+					  phy_offset);
+				data_offset++;
+				phy_offset++;
+			}
+			break;
+		case IXGBE_CONTROL_NL:
+			data_offset++;
+			DEBUGOUT("CONTROL:\n");
+			if (edata == IXGBE_CONTROL_EOL_NL) {
+				DEBUGOUT("EOL\n");
+				end_data = true;
+			} else if (edata == IXGBE_CONTROL_SOL_NL) {
+				DEBUGOUT("SOL\n");
+			} else {
+				DEBUGOUT("Bad control value\n");
+				ret_val = IXGBE_ERR_PHY;
+				goto out;
+			}
+			break;
+		default:
+			DEBUGOUT("Bad control type\n");
+			ret_val = IXGBE_ERR_PHY;
+			goto out;
+		}
+	}
+
+out:
+	return ret_val;
+
+err_eeprom:
+	ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+		      "eeprom read at offset %d failed", data_offset);
+	return IXGBE_ERR_PHY;
+}
+
+/**
+ *  ixgbe_identify_module_generic - Identifies module type
+ *  @hw: pointer to hardware structure
+ *
+ *  Determines HW type and calls appropriate function.
+ **/
+s32 ixgbe_identify_module_generic(struct ixgbe_hw *hw)
+{
+	s32 status = IXGBE_ERR_SFP_NOT_PRESENT;
+
+	DEBUGFUNC("ixgbe_identify_module_generic");
+
+	switch (hw->mac.ops.get_media_type(hw)) {
+	case ixgbe_media_type_fiber:
+		status = ixgbe_identify_sfp_module_generic(hw);
+		break;
+
+	case ixgbe_media_type_fiber_qsfp:
+		status = ixgbe_identify_qsfp_module_generic(hw);
+		break;
+
+	default:
+		hw->phy.sfp_type = ixgbe_sfp_type_not_present;
+		status = IXGBE_ERR_SFP_NOT_PRESENT;
+		break;
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_identify_sfp_module_generic - Identifies SFP modules
+ *  @hw: pointer to hardware structure
+ *
+ *  Searches for and identifies the SFP module and assigns appropriate PHY type.
+ **/
+s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
+{
+	s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
+	u32 vendor_oui = 0;
+	enum ixgbe_sfp_type stored_sfp_type = hw->phy.sfp_type;
+	u8 identifier = 0;
+	u8 comp_codes_1g = 0;
+	u8 comp_codes_10g = 0;
+	u8 oui_bytes[3] = {0, 0, 0};
+	u8 cable_tech = 0;
+	u8 cable_spec = 0;
+	u16 enforce_sfp = 0;
+
+	DEBUGFUNC("ixgbe_identify_sfp_module_generic");
+
+	if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_fiber) {
+		hw->phy.sfp_type = ixgbe_sfp_type_not_present;
+		status = IXGBE_ERR_SFP_NOT_PRESENT;
+		goto out;
+	}
+
+	/* LAN ID is needed for I2C access */
+	hw->mac.ops.set_lan_id(hw);
+
+	status = hw->phy.ops.read_i2c_eeprom(hw,
+					     IXGBE_SFF_IDENTIFIER,
+					     &identifier);
+
+	if (status != IXGBE_SUCCESS)
+		goto err_read_i2c_eeprom;
+
+	if (identifier != IXGBE_SFF_IDENTIFIER_SFP) {
+		hw->phy.type = ixgbe_phy_sfp_unsupported;
+		status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+	} else {
+		status = hw->phy.ops.read_i2c_eeprom(hw,
+						     IXGBE_SFF_1GBE_COMP_CODES,
+						     &comp_codes_1g);
+
+		if (status != IXGBE_SUCCESS)
+			goto err_read_i2c_eeprom;
+
+		status = hw->phy.ops.read_i2c_eeprom(hw,
+						     IXGBE_SFF_10GBE_COMP_CODES,
+						     &comp_codes_10g);
+
+		if (status != IXGBE_SUCCESS)
+			goto err_read_i2c_eeprom;
+		status = hw->phy.ops.read_i2c_eeprom(hw,
+						     IXGBE_SFF_CABLE_TECHNOLOGY,
+						     &cable_tech);
+
+		if (status != IXGBE_SUCCESS)
+			goto err_read_i2c_eeprom;
+
+		 /* ID Module
+		  * =========
+		  * 0   SFP_DA_CU
+		  * 1   SFP_SR
+		  * 2   SFP_LR
+		  * 3   SFP_DA_CORE0 - 82599-specific
+		  * 4   SFP_DA_CORE1 - 82599-specific
+		  * 5   SFP_SR/LR_CORE0 - 82599-specific
+		  * 6   SFP_SR/LR_CORE1 - 82599-specific
+		  * 7   SFP_act_lmt_DA_CORE0 - 82599-specific
+		  * 8   SFP_act_lmt_DA_CORE1 - 82599-specific
+		  * 9   SFP_1g_cu_CORE0 - 82599-specific
+		  * 10  SFP_1g_cu_CORE1 - 82599-specific
+		  * 11  SFP_1g_sx_CORE0 - 82599-specific
+		  * 12  SFP_1g_sx_CORE1 - 82599-specific
+		  */
+		if (hw->mac.type == ixgbe_mac_82598EB) {
+			if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
+				hw->phy.sfp_type = ixgbe_sfp_type_da_cu;
+			else if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
+				hw->phy.sfp_type = ixgbe_sfp_type_sr;
+			else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
+				hw->phy.sfp_type = ixgbe_sfp_type_lr;
+			else
+				hw->phy.sfp_type = ixgbe_sfp_type_unknown;
+		} else {
+			if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) {
+				if (hw->bus.lan_id == 0)
+					hw->phy.sfp_type =
+						     ixgbe_sfp_type_da_cu_core0;
+				else
+					hw->phy.sfp_type =
+						     ixgbe_sfp_type_da_cu_core1;
+			} else if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE) {
+				hw->phy.ops.read_i2c_eeprom(
+						hw, IXGBE_SFF_CABLE_SPEC_COMP,
+						&cable_spec);
+				if (cable_spec &
+				    IXGBE_SFF_DA_SPEC_ACTIVE_LIMITING) {
+					if (hw->bus.lan_id == 0)
+						hw->phy.sfp_type =
+						ixgbe_sfp_type_da_act_lmt_core0;
+					else
+						hw->phy.sfp_type =
+						ixgbe_sfp_type_da_act_lmt_core1;
+				} else {
+					hw->phy.sfp_type =
+							ixgbe_sfp_type_unknown;
+				}
+			} else if (comp_codes_10g &
+				   (IXGBE_SFF_10GBASESR_CAPABLE |
+				    IXGBE_SFF_10GBASELR_CAPABLE)) {
+				if (hw->bus.lan_id == 0)
+					hw->phy.sfp_type =
+						      ixgbe_sfp_type_srlr_core0;
+				else
+					hw->phy.sfp_type =
+						      ixgbe_sfp_type_srlr_core1;
+			} else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE) {
+				if (hw->bus.lan_id == 0)
+					hw->phy.sfp_type =
+						ixgbe_sfp_type_1g_cu_core0;
+				else
+					hw->phy.sfp_type =
+						ixgbe_sfp_type_1g_cu_core1;
+			} else if (comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) {
+				if (hw->bus.lan_id == 0)
+					hw->phy.sfp_type =
+						ixgbe_sfp_type_1g_sx_core0;
+				else
+					hw->phy.sfp_type =
+						ixgbe_sfp_type_1g_sx_core1;
+			} else if (comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) {
+				if (hw->bus.lan_id == 0)
+					hw->phy.sfp_type =
+						ixgbe_sfp_type_1g_lx_core0;
+				else
+					hw->phy.sfp_type =
+						ixgbe_sfp_type_1g_lx_core1;
+			} else {
+				hw->phy.sfp_type = ixgbe_sfp_type_unknown;
+			}
+		}
+
+		if (hw->phy.sfp_type != stored_sfp_type)
+			hw->phy.sfp_setup_needed = true;
+
+		/* Determine if the SFP+ PHY is dual speed or not. */
+		hw->phy.multispeed_fiber = false;
+		if (((comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) &&
+		   (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)) ||
+		   ((comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) &&
+		   (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)))
+			hw->phy.multispeed_fiber = true;
+
+		/* Determine PHY vendor */
+		if (hw->phy.type != ixgbe_phy_nl) {
+			hw->phy.id = identifier;
+			status = hw->phy.ops.read_i2c_eeprom(hw,
+						    IXGBE_SFF_VENDOR_OUI_BYTE0,
+						    &oui_bytes[0]);
+
+			if (status != IXGBE_SUCCESS)
+				goto err_read_i2c_eeprom;
+
+			status = hw->phy.ops.read_i2c_eeprom(hw,
+						    IXGBE_SFF_VENDOR_OUI_BYTE1,
+						    &oui_bytes[1]);
+
+			if (status != IXGBE_SUCCESS)
+				goto err_read_i2c_eeprom;
+
+			status = hw->phy.ops.read_i2c_eeprom(hw,
+						    IXGBE_SFF_VENDOR_OUI_BYTE2,
+						    &oui_bytes[2]);
+
+			if (status != IXGBE_SUCCESS)
+				goto err_read_i2c_eeprom;
+
+			vendor_oui =
+			  ((oui_bytes[0] << IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT) |
+			   (oui_bytes[1] << IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT) |
+			   (oui_bytes[2] << IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT));
+
+			switch (vendor_oui) {
+			case IXGBE_SFF_VENDOR_OUI_TYCO:
+				if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
+					hw->phy.type =
+						    ixgbe_phy_sfp_passive_tyco;
+				break;
+			case IXGBE_SFF_VENDOR_OUI_FTL:
+				if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE)
+					hw->phy.type = ixgbe_phy_sfp_ftl_active;
+				else
+					hw->phy.type = ixgbe_phy_sfp_ftl;
+				break;
+			case IXGBE_SFF_VENDOR_OUI_AVAGO:
+				hw->phy.type = ixgbe_phy_sfp_avago;
+				break;
+			case IXGBE_SFF_VENDOR_OUI_INTEL:
+				hw->phy.type = ixgbe_phy_sfp_intel;
+				break;
+			default:
+				if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
+					hw->phy.type =
+						 ixgbe_phy_sfp_passive_unknown;
+				else if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE)
+					hw->phy.type =
+						ixgbe_phy_sfp_active_unknown;
+				else
+					hw->phy.type = ixgbe_phy_sfp_unknown;
+				break;
+			}
+		}
+
+		/* Allow any DA cable vendor */
+		if (cable_tech & (IXGBE_SFF_DA_PASSIVE_CABLE |
+		    IXGBE_SFF_DA_ACTIVE_CABLE)) {
+			status = IXGBE_SUCCESS;
+			goto out;
+		}
+
+		/* Verify supported 1G SFP modules */
+		if (comp_codes_10g == 0 &&
+		    !(hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
+		      hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
+		      hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
+		      hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 ||
+		      hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
+		      hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1)) {
+			hw->phy.type = ixgbe_phy_sfp_unsupported;
+			status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+			goto out;
+		}
+
+		/* Anything else 82598-based is supported */
+		if (hw->mac.type == ixgbe_mac_82598EB) {
+			status = IXGBE_SUCCESS;
+			goto out;
+		}
+
+		ixgbe_get_device_caps(hw, &enforce_sfp);
+		if (!(enforce_sfp & IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP) &&
+		    !(hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
+		      hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
+		      hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
+		      hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 ||
+		      hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
+		      hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1)) {
+			/* Make sure we're a supported PHY type */
+			if (hw->phy.type == ixgbe_phy_sfp_intel) {
+				status = IXGBE_SUCCESS;
+			} else {
+				if (hw->allow_unsupported_sfp == true) {
+					EWARN(hw, "WARNING: Intel (R) Network "
+					      "Connections are quality tested "
+					      "using Intel (R) Ethernet Optics."
+					      " Using untested modules is not "
+					      "supported and may cause unstable"
+					      " operation or damage to the "
+					      "module or the adapter. Intel "
+					      "Corporation is not responsible "
+					      "for any harm caused by using "
+					      "untested modules.\n", status);
+					status = IXGBE_SUCCESS;
+				} else {
+					DEBUGOUT("SFP+ module not supported\n");
+					hw->phy.type =
+						ixgbe_phy_sfp_unsupported;
+					status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+				}
+			}
+		} else {
+			status = IXGBE_SUCCESS;
+		}
+	}
+
+out:
+	return status;
+
+err_read_i2c_eeprom:
+	hw->phy.sfp_type = ixgbe_sfp_type_not_present;
+	if (hw->phy.type != ixgbe_phy_nl) {
+		hw->phy.id = 0;
+		hw->phy.type = ixgbe_phy_unknown;
+	}
+	return IXGBE_ERR_SFP_NOT_PRESENT;
+}
+
+/**
+ *  ixgbe_get_supported_phy_sfp_layer_generic - Returns physical layer type
+ *  @hw: pointer to hardware structure
+ *
+ *  Determines physical layer capabilities of the current SFP.
+ */
+s32 ixgbe_get_supported_phy_sfp_layer_generic(struct ixgbe_hw *hw)
+{
+	u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+	u8 comp_codes_10g = 0;
+	u8 comp_codes_1g = 0;
+
+	DEBUGFUNC("ixgbe_get_supported_phy_sfp_layer_generic");
+
+	hw->phy.ops.identify_sfp(hw);
+	if (hw->phy.sfp_type == ixgbe_sfp_type_not_present)
+		return physical_layer;
+
+	switch (hw->phy.type) {
+	case ixgbe_phy_sfp_passive_tyco:
+	case ixgbe_phy_sfp_passive_unknown:
+	case ixgbe_phy_qsfp_passive_unknown:
+		physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
+		break;
+	case ixgbe_phy_sfp_ftl_active:
+	case ixgbe_phy_sfp_active_unknown:
+	case ixgbe_phy_qsfp_active_unknown:
+		physical_layer = IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA;
+		break;
+	case ixgbe_phy_sfp_avago:
+	case ixgbe_phy_sfp_ftl:
+	case ixgbe_phy_sfp_intel:
+	case ixgbe_phy_sfp_unknown:
+		hw->phy.ops.read_i2c_eeprom(hw,
+		      IXGBE_SFF_1GBE_COMP_CODES, &comp_codes_1g);
+		hw->phy.ops.read_i2c_eeprom(hw,
+		      IXGBE_SFF_10GBE_COMP_CODES, &comp_codes_10g);
+		if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
+			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
+		else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
+			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
+		else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE)
+			physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_T;
+		else if (comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE)
+			physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_SX;
+		break;
+	case ixgbe_phy_qsfp_intel:
+	case ixgbe_phy_qsfp_unknown:
+		hw->phy.ops.read_i2c_eeprom(hw,
+		      IXGBE_SFF_QSFP_10GBE_COMP, &comp_codes_10g);
+		if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
+			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
+		else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
+			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
+		break;
+	default:
+		break;
+	}
+
+	return physical_layer;
+}
+
+/**
+ *  ixgbe_identify_qsfp_module_generic - Identifies QSFP modules
+ *  @hw: pointer to hardware structure
+ *
+ *  Searches for and identifies the QSFP module and assigns appropriate PHY type
+ **/
+s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw)
+{
+	s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
+	u32 vendor_oui = 0;
+	enum ixgbe_sfp_type stored_sfp_type = hw->phy.sfp_type;
+	u8 identifier = 0;
+	u8 comp_codes_1g = 0;
+	u8 comp_codes_10g = 0;
+	u8 oui_bytes[3] = {0, 0, 0};
+	u16 enforce_sfp = 0;
+	u8 connector = 0;
+	u8 cable_length = 0;
+	u8 device_tech = 0;
+	bool active_cable = false;
+
+	DEBUGFUNC("ixgbe_identify_qsfp_module_generic");
+
+	if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_fiber_qsfp) {
+		hw->phy.sfp_type = ixgbe_sfp_type_not_present;
+		status = IXGBE_ERR_SFP_NOT_PRESENT;
+		goto out;
+	}
+
+	/* LAN ID is needed for I2C access */
+	hw->mac.ops.set_lan_id(hw);
+
+	status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_IDENTIFIER,
+					     &identifier);
+
+	if (status != IXGBE_SUCCESS)
+		goto err_read_i2c_eeprom;
+
+	if (identifier != IXGBE_SFF_IDENTIFIER_QSFP_PLUS) {
+		hw->phy.type = ixgbe_phy_sfp_unsupported;
+		status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+		goto out;
+	}
+
+	hw->phy.id = identifier;
+
+	status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_QSFP_10GBE_COMP,
+					     &comp_codes_10g);
+
+	if (status != IXGBE_SUCCESS)
+		goto err_read_i2c_eeprom;
+
+	status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_QSFP_1GBE_COMP,
+					     &comp_codes_1g);
+
+	if (status != IXGBE_SUCCESS)
+		goto err_read_i2c_eeprom;
+
+	if (comp_codes_10g & IXGBE_SFF_QSFP_DA_PASSIVE_CABLE) {
+		hw->phy.type = ixgbe_phy_qsfp_passive_unknown;
+		if (hw->bus.lan_id == 0)
+			hw->phy.sfp_type = ixgbe_sfp_type_da_cu_core0;
+		else
+			hw->phy.sfp_type = ixgbe_sfp_type_da_cu_core1;
+	} else if (comp_codes_10g & (IXGBE_SFF_10GBASESR_CAPABLE |
+				     IXGBE_SFF_10GBASELR_CAPABLE)) {
+		if (hw->bus.lan_id == 0)
+			hw->phy.sfp_type = ixgbe_sfp_type_srlr_core0;
+		else
+			hw->phy.sfp_type = ixgbe_sfp_type_srlr_core1;
+	} else {
+		if (comp_codes_10g & IXGBE_SFF_QSFP_DA_ACTIVE_CABLE)
+			active_cable = true;
+
+		if (!active_cable) {
+			/* check for active DA cables that pre-date
+			 * SFF-8436 v3.6 */
+			hw->phy.ops.read_i2c_eeprom(hw,
+					IXGBE_SFF_QSFP_CONNECTOR,
+					&connector);
+
+			hw->phy.ops.read_i2c_eeprom(hw,
+					IXGBE_SFF_QSFP_CABLE_LENGTH,
+					&cable_length);
+
+			hw->phy.ops.read_i2c_eeprom(hw,
+					IXGBE_SFF_QSFP_DEVICE_TECH,
+					&device_tech);
+
+			if ((connector ==
+				     IXGBE_SFF_QSFP_CONNECTOR_NOT_SEPARABLE) &&
+			    (cable_length > 0) &&
+			    ((device_tech >> 4) ==
+				     IXGBE_SFF_QSFP_TRANSMITER_850NM_VCSEL))
+				active_cable = true;
+		}
+
+		if (active_cable) {
+			hw->phy.type = ixgbe_phy_qsfp_active_unknown;
+			if (hw->bus.lan_id == 0)
+				hw->phy.sfp_type =
+						ixgbe_sfp_type_da_act_lmt_core0;
+			else
+				hw->phy.sfp_type =
+						ixgbe_sfp_type_da_act_lmt_core1;
+		} else {
+			/* unsupported module type */
+			hw->phy.type = ixgbe_phy_sfp_unsupported;
+			status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+			goto out;
+		}
+	}
+
+	if (hw->phy.sfp_type != stored_sfp_type)
+		hw->phy.sfp_setup_needed = true;
+
+	/* Determine if the QSFP+ PHY is dual speed or not. */
+	hw->phy.multispeed_fiber = false;
+	if (((comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) &&
+	   (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)) ||
+	   ((comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) &&
+	   (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)))
+		hw->phy.multispeed_fiber = true;
+
+	/* Determine PHY vendor for optical modules */
+	if (comp_codes_10g & (IXGBE_SFF_10GBASESR_CAPABLE |
+			      IXGBE_SFF_10GBASELR_CAPABLE))  {
+		status = hw->phy.ops.read_i2c_eeprom(hw,
+					    IXGBE_SFF_QSFP_VENDOR_OUI_BYTE0,
+					    &oui_bytes[0]);
+
+		if (status != IXGBE_SUCCESS)
+			goto err_read_i2c_eeprom;
+
+		status = hw->phy.ops.read_i2c_eeprom(hw,
+					    IXGBE_SFF_QSFP_VENDOR_OUI_BYTE1,
+					    &oui_bytes[1]);
+
+		if (status != IXGBE_SUCCESS)
+			goto err_read_i2c_eeprom;
+
+		status = hw->phy.ops.read_i2c_eeprom(hw,
+					    IXGBE_SFF_QSFP_VENDOR_OUI_BYTE2,
+					    &oui_bytes[2]);
+
+		if (status != IXGBE_SUCCESS)
+			goto err_read_i2c_eeprom;
+
+		vendor_oui =
+		  ((oui_bytes[0] << IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT) |
+		   (oui_bytes[1] << IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT) |
+		   (oui_bytes[2] << IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT));
+
+		if (vendor_oui == IXGBE_SFF_VENDOR_OUI_INTEL)
+			hw->phy.type = ixgbe_phy_qsfp_intel;
+		else
+			hw->phy.type = ixgbe_phy_qsfp_unknown;
+
+		ixgbe_get_device_caps(hw, &enforce_sfp);
+		if (!(enforce_sfp & IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP)) {
+			/* Make sure we're a supported PHY type */
+			if (hw->phy.type == ixgbe_phy_qsfp_intel) {
+				status = IXGBE_SUCCESS;
+			} else {
+				if (hw->allow_unsupported_sfp == true) {
+					EWARN(hw, "WARNING: Intel (R) Network "
+					      "Connections are quality tested "
+					      "using Intel (R) Ethernet Optics."
+					      " Using untested modules is not "
+					      "supported and may cause unstable"
+					      " operation or damage to the "
+					      "module or the adapter. Intel "
+					      "Corporation is not responsible "
+					      "for any harm caused by using "
+					      "untested modules.\n", status);
+					status = IXGBE_SUCCESS;
+				} else {
+					DEBUGOUT("QSFP module not supported\n");
+					hw->phy.type =
+						ixgbe_phy_sfp_unsupported;
+					status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+				}
+			}
+		} else {
+			status = IXGBE_SUCCESS;
+		}
+	}
+
+out:
+	return status;
+
+err_read_i2c_eeprom:
+	hw->phy.sfp_type = ixgbe_sfp_type_not_present;
+	hw->phy.id = 0;
+	hw->phy.type = ixgbe_phy_unknown;
+
+	return IXGBE_ERR_SFP_NOT_PRESENT;
+}
+
+
+/**
+ *  ixgbe_get_sfp_init_sequence_offsets - Provides offset of PHY init sequence
+ *  @hw: pointer to hardware structure
+ *  @list_offset: offset to the SFP ID list
+ *  @data_offset: offset to the SFP data block
+ *
+ *  Checks the MAC's EEPROM to see if it supports a given SFP+ module type, if
+ *  so it returns the offsets to the phy init sequence block.
+ **/
+s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
+					u16 *list_offset,
+					u16 *data_offset)
+{
+	u16 sfp_id;
+	u16 sfp_type = hw->phy.sfp_type;
+
+	DEBUGFUNC("ixgbe_get_sfp_init_sequence_offsets");
+
+	if (hw->phy.sfp_type == ixgbe_sfp_type_unknown)
+		return IXGBE_ERR_SFP_NOT_SUPPORTED;
+
+	if (hw->phy.sfp_type == ixgbe_sfp_type_not_present)
+		return IXGBE_ERR_SFP_NOT_PRESENT;
+
+	if ((hw->device_id == IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM) &&
+	    (hw->phy.sfp_type == ixgbe_sfp_type_da_cu))
+		return IXGBE_ERR_SFP_NOT_SUPPORTED;
+
+	/*
+	 * Limiting active cables and 1G Phys must be initialized as
+	 * SR modules
+	 */
+	if (sfp_type == ixgbe_sfp_type_da_act_lmt_core0 ||
+	    sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
+	    sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
+	    sfp_type == ixgbe_sfp_type_1g_sx_core0)
+		sfp_type = ixgbe_sfp_type_srlr_core0;
+	else if (sfp_type == ixgbe_sfp_type_da_act_lmt_core1 ||
+		 sfp_type == ixgbe_sfp_type_1g_lx_core1 ||
+		 sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
+		 sfp_type == ixgbe_sfp_type_1g_sx_core1)
+		sfp_type = ixgbe_sfp_type_srlr_core1;
+
+	/* Read offset to PHY init contents */
+	if (hw->eeprom.ops.read(hw, IXGBE_PHY_INIT_OFFSET_NL, list_offset)) {
+		ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+			      "eeprom read at offset %d failed",
+			      IXGBE_PHY_INIT_OFFSET_NL);
+		return IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT;
+	}
+
+	if ((!*list_offset) || (*list_offset == 0xFFFF))
+		return IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT;
+
+	/* Shift offset to first ID word */
+	(*list_offset)++;
+
+	/*
+	 * Find the matching SFP ID in the EEPROM
+	 * and program the init sequence
+	 */
+	if (hw->eeprom.ops.read(hw, *list_offset, &sfp_id))
+		goto err_phy;
+
+	while (sfp_id != IXGBE_PHY_INIT_END_NL) {
+		if (sfp_id == sfp_type) {
+			(*list_offset)++;
+			if (hw->eeprom.ops.read(hw, *list_offset, data_offset))
+				goto err_phy;
+			if ((!*data_offset) || (*data_offset == 0xFFFF)) {
+				DEBUGOUT("SFP+ module not supported\n");
+				return IXGBE_ERR_SFP_NOT_SUPPORTED;
+			} else {
+				break;
+			}
+		} else {
+			(*list_offset) += 2;
+			if (hw->eeprom.ops.read(hw, *list_offset, &sfp_id))
+				goto err_phy;
+		}
+	}
+
+	if (sfp_id == IXGBE_PHY_INIT_END_NL) {
+		DEBUGOUT("No matching SFP+ module found\n");
+		return IXGBE_ERR_SFP_NOT_SUPPORTED;
+	}
+
+	return IXGBE_SUCCESS;
+
+err_phy:
+	ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+		      "eeprom read at offset %d failed", *list_offset);
+	return IXGBE_ERR_PHY;
+}
+
+/**
+ *  ixgbe_read_i2c_eeprom_generic - Reads 8 bit EEPROM word over I2C interface
+ *  @hw: pointer to hardware structure
+ *  @byte_offset: EEPROM byte offset to read
+ *  @eeprom_data: value read
+ *
+ *  Performs byte read operation to SFP module's EEPROM over I2C interface.
+ **/
+s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
+				  u8 *eeprom_data)
+{
+	DEBUGFUNC("ixgbe_read_i2c_eeprom_generic");
+
+	return hw->phy.ops.read_i2c_byte(hw, byte_offset,
+					 IXGBE_I2C_EEPROM_DEV_ADDR,
+					 eeprom_data);
+}
+
+/**
+ *  ixgbe_read_i2c_sff8472_generic - Reads 8 bit word over I2C interface
+ *  @hw: pointer to hardware structure
+ *  @byte_offset: byte offset at address 0xA2
+ *  @eeprom_data: value read
+ *
+ *  Performs byte read operation to SFP module's SFF-8472 data over I2C
+ **/
+STATIC s32 ixgbe_read_i2c_sff8472_generic(struct ixgbe_hw *hw, u8 byte_offset,
+					  u8 *sff8472_data)
+{
+	return hw->phy.ops.read_i2c_byte(hw, byte_offset,
+					 IXGBE_I2C_EEPROM_DEV_ADDR2,
+					 sff8472_data);
+}
+
+/**
+ *  ixgbe_write_i2c_eeprom_generic - Writes 8 bit EEPROM word over I2C interface
+ *  @hw: pointer to hardware structure
+ *  @byte_offset: EEPROM byte offset to write
+ *  @eeprom_data: value to write
+ *
+ *  Performs byte write operation to SFP module's EEPROM over I2C interface.
+ **/
+s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
+				   u8 eeprom_data)
+{
+	DEBUGFUNC("ixgbe_write_i2c_eeprom_generic");
+
+	return hw->phy.ops.write_i2c_byte(hw, byte_offset,
+					  IXGBE_I2C_EEPROM_DEV_ADDR,
+					  eeprom_data);
+}
+
+/**
+ * ixgbe_is_sfp_probe - Returns true if SFP is being detected
+ * @hw: pointer to hardware structure
+ * @offset: eeprom offset to be read
+ * @addr: I2C address to be read
+ */
+STATIC bool ixgbe_is_sfp_probe(struct ixgbe_hw *hw, u8 offset, u8 addr)
+{
+	if (addr == IXGBE_I2C_EEPROM_DEV_ADDR &&
+	    offset == IXGBE_SFF_IDENTIFIER &&
+	    hw->phy.sfp_type == ixgbe_sfp_type_not_present)
+		return true;
+	return false;
+}
+
+/**
+ *  ixgbe_read_i2c_byte_generic_int - Reads 8 bit word over I2C
+ *  @hw: pointer to hardware structure
+ *  @byte_offset: byte offset to read
+ *  @data: value read
+ *  @lock: true if to take and release semaphore
+ *
+ *  Performs byte read operation to SFP module's EEPROM over I2C interface at
+ *  a specified device address.
+ **/
+STATIC s32 ixgbe_read_i2c_byte_generic_int(struct ixgbe_hw *hw, u8 byte_offset,
+					   u8 dev_addr, u8 *data, bool lock)
+{
+	s32 status;
+	u32 max_retry = 10;
+	u32 retry = 0;
+	u32 swfw_mask = hw->phy.phy_semaphore_mask;
+	bool nack = 1;
+	*data = 0;
+
+	DEBUGFUNC("ixgbe_read_i2c_byte_generic");
+
+	if (hw->mac.type >= ixgbe_mac_X550)
+		max_retry = 3;
+	if (ixgbe_is_sfp_probe(hw, byte_offset, dev_addr))
+		max_retry = IXGBE_SFP_DETECT_RETRIES;
+
+	do {
+		if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask))
+			return IXGBE_ERR_SWFW_SYNC;
+
+		ixgbe_i2c_start(hw);
+
+		/* Device Address and write indication */
+		status = ixgbe_clock_out_i2c_byte(hw, dev_addr);
+		if (status != IXGBE_SUCCESS)
+			goto fail;
+
+		status = ixgbe_get_i2c_ack(hw);
+		if (status != IXGBE_SUCCESS)
+			goto fail;
+
+		status = ixgbe_clock_out_i2c_byte(hw, byte_offset);
+		if (status != IXGBE_SUCCESS)
+			goto fail;
+
+		status = ixgbe_get_i2c_ack(hw);
+		if (status != IXGBE_SUCCESS)
+			goto fail;
+
+		ixgbe_i2c_start(hw);
+
+		/* Device Address and read indication */
+		status = ixgbe_clock_out_i2c_byte(hw, (dev_addr | 0x1));
+		if (status != IXGBE_SUCCESS)
+			goto fail;
+
+		status = ixgbe_get_i2c_ack(hw);
+		if (status != IXGBE_SUCCESS)
+			goto fail;
+
+		status = ixgbe_clock_in_i2c_byte(hw, data);
+		if (status != IXGBE_SUCCESS)
+			goto fail;
+
+		status = ixgbe_clock_out_i2c_bit(hw, nack);
+		if (status != IXGBE_SUCCESS)
+			goto fail;
+
+		ixgbe_i2c_stop(hw);
+		if (lock)
+			hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+		return IXGBE_SUCCESS;
+
+fail:
+		ixgbe_i2c_bus_clear(hw);
+		if (lock) {
+			hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+			msec_delay(100);
+		}
+		retry++;
+		if (retry < max_retry)
+			DEBUGOUT("I2C byte read error - Retrying.\n");
+		else
+			DEBUGOUT("I2C byte read error.\n");
+
+	} while (retry < max_retry);
+
+	return status;
+}
+
+/**
+ *  ixgbe_read_i2c_byte_generic - Reads 8 bit word over I2C
+ *  @hw: pointer to hardware structure
+ *  @byte_offset: byte offset to read
+ *  @data: value read
+ *
+ *  Performs byte read operation to SFP module's EEPROM over I2C interface at
+ *  a specified device address.
+ **/
+s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
+				u8 dev_addr, u8 *data)
+{
+	return ixgbe_read_i2c_byte_generic_int(hw, byte_offset, dev_addr,
+					       data, true);
+}
+
+/**
+ *  ixgbe_read_i2c_byte_generic_unlocked - Reads 8 bit word over I2C
+ *  @hw: pointer to hardware structure
+ *  @byte_offset: byte offset to read
+ *  @data: value read
+ *
+ *  Performs byte read operation to SFP module's EEPROM over I2C interface at
+ *  a specified device address.
+ **/
+s32 ixgbe_read_i2c_byte_generic_unlocked(struct ixgbe_hw *hw, u8 byte_offset,
+					 u8 dev_addr, u8 *data)
+{
+	return ixgbe_read_i2c_byte_generic_int(hw, byte_offset, dev_addr,
+					       data, false);
+}
+
+/**
+ *  ixgbe_write_i2c_byte_generic_int - Writes 8 bit word over I2C
+ *  @hw: pointer to hardware structure
+ *  @byte_offset: byte offset to write
+ *  @data: value to write
+ *  @lock: true if to take and release semaphore
+ *
+ *  Performs byte write operation to SFP module's EEPROM over I2C interface at
+ *  a specified device address.
+ **/
+STATIC s32 ixgbe_write_i2c_byte_generic_int(struct ixgbe_hw *hw, u8 byte_offset,
+					    u8 dev_addr, u8 data, bool lock)
+{
+	s32 status;
+	u32 max_retry = 1;
+	u32 retry = 0;
+	u32 swfw_mask = hw->phy.phy_semaphore_mask;
+
+	DEBUGFUNC("ixgbe_write_i2c_byte_generic");
+
+	if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) !=
+	    IXGBE_SUCCESS)
+		return IXGBE_ERR_SWFW_SYNC;
+
+	do {
+		ixgbe_i2c_start(hw);
+
+		status = ixgbe_clock_out_i2c_byte(hw, dev_addr);
+		if (status != IXGBE_SUCCESS)
+			goto fail;
+
+		status = ixgbe_get_i2c_ack(hw);
+		if (status != IXGBE_SUCCESS)
+			goto fail;
+
+		status = ixgbe_clock_out_i2c_byte(hw, byte_offset);
+		if (status != IXGBE_SUCCESS)
+			goto fail;
+
+		status = ixgbe_get_i2c_ack(hw);
+		if (status != IXGBE_SUCCESS)
+			goto fail;
+
+		status = ixgbe_clock_out_i2c_byte(hw, data);
+		if (status != IXGBE_SUCCESS)
+			goto fail;
+
+		status = ixgbe_get_i2c_ack(hw);
+		if (status != IXGBE_SUCCESS)
+			goto fail;
+
+		ixgbe_i2c_stop(hw);
+		if (lock)
+			hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+		return IXGBE_SUCCESS;
+
+fail:
+		ixgbe_i2c_bus_clear(hw);
+		retry++;
+		if (retry < max_retry)
+			DEBUGOUT("I2C byte write error - Retrying.\n");
+		else
+			DEBUGOUT("I2C byte write error.\n");
+	} while (retry < max_retry);
+
+	if (lock)
+		hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+
+	return status;
+}
+
+/**
+ *  ixgbe_write_i2c_byte_generic - Writes 8 bit word over I2C
+ *  @hw: pointer to hardware structure
+ *  @byte_offset: byte offset to write
+ *  @data: value to write
+ *
+ *  Performs byte write operation to SFP module's EEPROM over I2C interface at
+ *  a specified device address.
+ **/
+s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
+				 u8 dev_addr, u8 data)
+{
+	return ixgbe_write_i2c_byte_generic_int(hw, byte_offset, dev_addr,
+						data, true);
+}
+
+/**
+ *  ixgbe_write_i2c_byte_generic_unlocked - Writes 8 bit word over I2C
+ *  @hw: pointer to hardware structure
+ *  @byte_offset: byte offset to write
+ *  @data: value to write
+ *
+ *  Performs byte write operation to SFP module's EEPROM over I2C interface at
+ *  a specified device address.
+ **/
+s32 ixgbe_write_i2c_byte_generic_unlocked(struct ixgbe_hw *hw, u8 byte_offset,
+					  u8 dev_addr, u8 data)
+{
+	return ixgbe_write_i2c_byte_generic_int(hw, byte_offset, dev_addr,
+						data, false);
+}
+
+/**
+ *  ixgbe_i2c_start - Sets I2C start condition
+ *  @hw: pointer to hardware structure
+ *
+ *  Sets I2C start condition (High -> Low on SDA while SCL is High)
+ *  Set bit-bang mode on X550 hardware.
+ **/
+STATIC void ixgbe_i2c_start(struct ixgbe_hw *hw)
+{
+	u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+
+	DEBUGFUNC("ixgbe_i2c_start");
+
+	i2cctl |= IXGBE_I2C_BB_EN_BY_MAC(hw);
+
+	/* Start condition must begin with data and clock high */
+	ixgbe_set_i2c_data(hw, &i2cctl, 1);
+	ixgbe_raise_i2c_clk(hw, &i2cctl);
+
+	/* Setup time for start condition (4.7us) */
+	usec_delay(IXGBE_I2C_T_SU_STA);
+
+	ixgbe_set_i2c_data(hw, &i2cctl, 0);
+
+	/* Hold time for start condition (4us) */
+	usec_delay(IXGBE_I2C_T_HD_STA);
+
+	ixgbe_lower_i2c_clk(hw, &i2cctl);
+
+	/* Minimum low period of clock is 4.7 us */
+	usec_delay(IXGBE_I2C_T_LOW);
+
+}
+
+/**
+ *  ixgbe_i2c_stop - Sets I2C stop condition
+ *  @hw: pointer to hardware structure
+ *
+ *  Sets I2C stop condition (Low -> High on SDA while SCL is High)
+ *  Disables bit-bang mode and negates data output enable on X550
+ *  hardware.
+ **/
+STATIC void ixgbe_i2c_stop(struct ixgbe_hw *hw)
+{
+	u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+	u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN_BY_MAC(hw);
+	u32 clk_oe_bit = IXGBE_I2C_CLK_OE_N_EN_BY_MAC(hw);
+	u32 bb_en_bit = IXGBE_I2C_BB_EN_BY_MAC(hw);
+
+	DEBUGFUNC("ixgbe_i2c_stop");
+
+	/* Stop condition must begin with data low and clock high */
+	ixgbe_set_i2c_data(hw, &i2cctl, 0);
+	ixgbe_raise_i2c_clk(hw, &i2cctl);
+
+	/* Setup time for stop condition (4us) */
+	usec_delay(IXGBE_I2C_T_SU_STO);
+
+	ixgbe_set_i2c_data(hw, &i2cctl, 1);
+
+	/* bus free time between stop and start (4.7us)*/
+	usec_delay(IXGBE_I2C_T_BUF);
+
+	if (bb_en_bit || data_oe_bit || clk_oe_bit) {
+		i2cctl &= ~bb_en_bit;
+		i2cctl |= data_oe_bit | clk_oe_bit;
+		IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), i2cctl);
+		IXGBE_WRITE_FLUSH(hw);
+	}
+}
+
+/**
+ *  ixgbe_clock_in_i2c_byte - Clocks in one byte via I2C
+ *  @hw: pointer to hardware structure
+ *  @data: data byte to clock in
+ *
+ *  Clocks in one byte data via I2C data/clock
+ **/
+STATIC s32 ixgbe_clock_in_i2c_byte(struct ixgbe_hw *hw, u8 *data)
+{
+	s32 i;
+	bool bit = 0;
+
+	DEBUGFUNC("ixgbe_clock_in_i2c_byte");
+
+	*data = 0;
+	for (i = 7; i >= 0; i--) {
+		ixgbe_clock_in_i2c_bit(hw, &bit);
+		*data |= bit << i;
+	}
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_clock_out_i2c_byte - Clocks out one byte via I2C
+ *  @hw: pointer to hardware structure
+ *  @data: data byte clocked out
+ *
+ *  Clocks out one byte data via I2C data/clock
+ **/
+STATIC s32 ixgbe_clock_out_i2c_byte(struct ixgbe_hw *hw, u8 data)
+{
+	s32 status = IXGBE_SUCCESS;
+	s32 i;
+	u32 i2cctl;
+	bool bit;
+
+	DEBUGFUNC("ixgbe_clock_out_i2c_byte");
+
+	for (i = 7; i >= 0; i--) {
+		bit = (data >> i) & 0x1;
+		status = ixgbe_clock_out_i2c_bit(hw, bit);
+
+		if (status != IXGBE_SUCCESS)
+			break;
+	}
+
+	/* Release SDA line (set high) */
+	i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+	i2cctl |= IXGBE_I2C_DATA_OUT_BY_MAC(hw);
+	i2cctl |= IXGBE_I2C_DATA_OE_N_EN_BY_MAC(hw);
+	IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), i2cctl);
+	IXGBE_WRITE_FLUSH(hw);
+
+	return status;
+}
+
+/**
+ *  ixgbe_get_i2c_ack - Polls for I2C ACK
+ *  @hw: pointer to hardware structure
+ *
+ *  Clocks in/out one bit via I2C data/clock
+ **/
+STATIC s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw)
+{
+	u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN_BY_MAC(hw);
+	s32 status = IXGBE_SUCCESS;
+	u32 i = 0;
+	u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+	u32 timeout = 10;
+	bool ack = 1;
+
+	DEBUGFUNC("ixgbe_get_i2c_ack");
+
+	if (data_oe_bit) {
+		i2cctl |= IXGBE_I2C_DATA_OUT_BY_MAC(hw);
+		i2cctl |= data_oe_bit;
+		IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), i2cctl);
+		IXGBE_WRITE_FLUSH(hw);
+	}
+	ixgbe_raise_i2c_clk(hw, &i2cctl);
+
+	/* Minimum high period of clock is 4us */
+	usec_delay(IXGBE_I2C_T_HIGH);
+
+	/* Poll for ACK.  Note that ACK in I2C spec is
+	 * transition from 1 to 0 */
+	for (i = 0; i < timeout; i++) {
+		i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+		ack = ixgbe_get_i2c_data(hw, &i2cctl);
+
+		usec_delay(1);
+		if (!ack)
+			break;
+	}
+
+	if (ack) {
+		DEBUGOUT("I2C ack was not received.\n");
+		status = IXGBE_ERR_I2C;
+	}
+
+	ixgbe_lower_i2c_clk(hw, &i2cctl);
+
+	/* Minimum low period of clock is 4.7 us */
+	usec_delay(IXGBE_I2C_T_LOW);
+
+	return status;
+}
+
+/**
+ *  ixgbe_clock_in_i2c_bit - Clocks in one bit via I2C data/clock
+ *  @hw: pointer to hardware structure
+ *  @data: read data value
+ *
+ *  Clocks in one bit via I2C data/clock
+ **/
+STATIC s32 ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data)
+{
+	u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+	u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN_BY_MAC(hw);
+
+	DEBUGFUNC("ixgbe_clock_in_i2c_bit");
+
+	if (data_oe_bit) {
+		i2cctl |= IXGBE_I2C_DATA_OUT_BY_MAC(hw);
+		i2cctl |= data_oe_bit;
+		IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), i2cctl);
+		IXGBE_WRITE_FLUSH(hw);
+	}
+	ixgbe_raise_i2c_clk(hw, &i2cctl);
+
+	/* Minimum high period of clock is 4us */
+	usec_delay(IXGBE_I2C_T_HIGH);
+
+	i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+	*data = ixgbe_get_i2c_data(hw, &i2cctl);
+
+	ixgbe_lower_i2c_clk(hw, &i2cctl);
+
+	/* Minimum low period of clock is 4.7 us */
+	usec_delay(IXGBE_I2C_T_LOW);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_clock_out_i2c_bit - Clocks in/out one bit via I2C data/clock
+ *  @hw: pointer to hardware structure
+ *  @data: data value to write
+ *
+ *  Clocks out one bit via I2C data/clock
+ **/
+STATIC s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data)
+{
+	s32 status;
+	u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+
+	DEBUGFUNC("ixgbe_clock_out_i2c_bit");
+
+	status = ixgbe_set_i2c_data(hw, &i2cctl, data);
+	if (status == IXGBE_SUCCESS) {
+		ixgbe_raise_i2c_clk(hw, &i2cctl);
+
+		/* Minimum high period of clock is 4us */
+		usec_delay(IXGBE_I2C_T_HIGH);
+
+		ixgbe_lower_i2c_clk(hw, &i2cctl);
+
+		/* Minimum low period of clock is 4.7 us.
+		 * This also takes care of the data hold time.
+		 */
+		usec_delay(IXGBE_I2C_T_LOW);
+	} else {
+		status = IXGBE_ERR_I2C;
+		ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+			     "I2C data was not set to %X\n", data);
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_raise_i2c_clk - Raises the I2C SCL clock
+ *  @hw: pointer to hardware structure
+ *  @i2cctl: Current value of I2CCTL register
+ *
+ *  Raises the I2C clock line '0'->'1'
+ *  Negates the I2C clock output enable on X550 hardware.
+ **/
+STATIC void ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl)
+{
+	u32 clk_oe_bit = IXGBE_I2C_CLK_OE_N_EN_BY_MAC(hw);
+	u32 i = 0;
+	u32 timeout = IXGBE_I2C_CLOCK_STRETCHING_TIMEOUT;
+	u32 i2cctl_r = 0;
+
+	DEBUGFUNC("ixgbe_raise_i2c_clk");
+
+	if (clk_oe_bit) {
+		*i2cctl |= clk_oe_bit;
+		IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl);
+	}
+
+	for (i = 0; i < timeout; i++) {
+		*i2cctl |= IXGBE_I2C_CLK_OUT_BY_MAC(hw);
+
+		IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl);
+		IXGBE_WRITE_FLUSH(hw);
+		/* SCL rise time (1000ns) */
+		usec_delay(IXGBE_I2C_T_RISE);
+
+		i2cctl_r = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+		if (i2cctl_r & IXGBE_I2C_CLK_IN_BY_MAC(hw))
+			break;
+	}
+}
+
+/**
+ *  ixgbe_lower_i2c_clk - Lowers the I2C SCL clock
+ *  @hw: pointer to hardware structure
+ *  @i2cctl: Current value of I2CCTL register
+ *
+ *  Lowers the I2C clock line '1'->'0'
+ *  Asserts the I2C clock output enable on X550 hardware.
+ **/
+STATIC void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl)
+{
+	DEBUGFUNC("ixgbe_lower_i2c_clk");
+
+	*i2cctl &= ~(IXGBE_I2C_CLK_OUT_BY_MAC(hw));
+	*i2cctl &= ~IXGBE_I2C_CLK_OE_N_EN_BY_MAC(hw);
+
+	IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl);
+	IXGBE_WRITE_FLUSH(hw);
+
+	/* SCL fall time (300ns) */
+	usec_delay(IXGBE_I2C_T_FALL);
+}
+
+/**
+ *  ixgbe_set_i2c_data - Sets the I2C data bit
+ *  @hw: pointer to hardware structure
+ *  @i2cctl: Current value of I2CCTL register
+ *  @data: I2C data value (0 or 1) to set
+ *
+ *  Sets the I2C data bit
+ *  Asserts the I2C data output enable on X550 hardware.
+ **/
+STATIC s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data)
+{
+	u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN_BY_MAC(hw);
+	s32 status = IXGBE_SUCCESS;
+
+	DEBUGFUNC("ixgbe_set_i2c_data");
+
+	if (data)
+		*i2cctl |= IXGBE_I2C_DATA_OUT_BY_MAC(hw);
+	else
+		*i2cctl &= ~(IXGBE_I2C_DATA_OUT_BY_MAC(hw));
+	*i2cctl &= ~data_oe_bit;
+
+	IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl);
+	IXGBE_WRITE_FLUSH(hw);
+
+	/* Data rise/fall (1000ns/300ns) and set-up time (250ns) */
+	usec_delay(IXGBE_I2C_T_RISE + IXGBE_I2C_T_FALL + IXGBE_I2C_T_SU_DATA);
+
+	if (!data)	/* Can't verify data in this case */
+		return IXGBE_SUCCESS;
+	if (data_oe_bit) {
+		*i2cctl |= data_oe_bit;
+		IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl);
+		IXGBE_WRITE_FLUSH(hw);
+	}
+
+	/* Verify data was set correctly */
+	*i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+	if (data != ixgbe_get_i2c_data(hw, i2cctl)) {
+		status = IXGBE_ERR_I2C;
+		ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+			     "Error - I2C data was not set to %X.\n",
+			     data);
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_get_i2c_data - Reads the I2C SDA data bit
+ *  @hw: pointer to hardware structure
+ *  @i2cctl: Current value of I2CCTL register
+ *
+ *  Returns the I2C data bit value
+ *  Negates the I2C data output enable on X550 hardware.
+ **/
+STATIC bool ixgbe_get_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl)
+{
+	u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN_BY_MAC(hw);
+	bool data;
+
+	DEBUGFUNC("ixgbe_get_i2c_data");
+
+	if (data_oe_bit) {
+		*i2cctl |= data_oe_bit;
+		IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl);
+		IXGBE_WRITE_FLUSH(hw);
+		usec_delay(IXGBE_I2C_T_FALL);
+	}
+
+	if (*i2cctl & IXGBE_I2C_DATA_IN_BY_MAC(hw))
+		data = 1;
+	else
+		data = 0;
+
+	return data;
+}
+
+/**
+ *  ixgbe_i2c_bus_clear - Clears the I2C bus
+ *  @hw: pointer to hardware structure
+ *
+ *  Clears the I2C bus by sending nine clock pulses.
+ *  Used when data line is stuck low.
+ **/
+void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw)
+{
+	u32 i2cctl;
+	u32 i;
+
+	DEBUGFUNC("ixgbe_i2c_bus_clear");
+
+	ixgbe_i2c_start(hw);
+	i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+
+	ixgbe_set_i2c_data(hw, &i2cctl, 1);
+
+	for (i = 0; i < 9; i++) {
+		ixgbe_raise_i2c_clk(hw, &i2cctl);
+
+		/* Min high period of clock is 4us */
+		usec_delay(IXGBE_I2C_T_HIGH);
+
+		ixgbe_lower_i2c_clk(hw, &i2cctl);
+
+		/* Min low period of clock is 4.7us*/
+		usec_delay(IXGBE_I2C_T_LOW);
+	}
+
+	ixgbe_i2c_start(hw);
+
+	/* Put the i2c bus back to default state */
+	ixgbe_i2c_stop(hw);
+}
+
+/**
+ *  ixgbe_tn_check_overtemp - Checks if an overtemp occurred.
+ *  @hw: pointer to hardware structure
+ *
+ *  Checks if the LASI temp alarm status was triggered due to overtemp
+ **/
+s32 ixgbe_tn_check_overtemp(struct ixgbe_hw *hw)
+{
+	s32 status = IXGBE_SUCCESS;
+	u16 phy_data = 0;
+
+	DEBUGFUNC("ixgbe_tn_check_overtemp");
+
+	if (hw->device_id != IXGBE_DEV_ID_82599_T3_LOM)
+		goto out;
+
+	/* Check that the LASI temp alarm status was triggered */
+	hw->phy.ops.read_reg(hw, IXGBE_TN_LASI_STATUS_REG,
+			     IXGBE_MDIO_PMA_PMD_DEV_TYPE, &phy_data);
+
+	if (!(phy_data & IXGBE_TN_LASI_STATUS_TEMP_ALARM))
+		goto out;
+
+	status = IXGBE_ERR_OVERTEMP;
+	ERROR_REPORT1(IXGBE_ERROR_CAUTION, "Device over temperature");
+out:
+	return status;
+}
+
+/**
+ * ixgbe_set_copper_phy_power - Control power for copper phy
+ * @hw: pointer to hardware structure
+ * @on: true for on, false for off
+ */
+s32 ixgbe_set_copper_phy_power(struct ixgbe_hw *hw, bool on)
+{
+	u32 status;
+	u16 reg;
+
+	if (!on && ixgbe_mng_present(hw))
+		return 0;
+
+	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL,
+				      IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+				      &reg);
+	if (status)
+		return status;
+
+	if (on) {
+		reg &= ~IXGBE_MDIO_PHY_SET_LOW_POWER_MODE;
+	} else {
+		if (ixgbe_check_reset_blocked(hw))
+			return 0;
+		reg |= IXGBE_MDIO_PHY_SET_LOW_POWER_MODE;
+	}
+
+	status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL,
+				       IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+				       reg);
+	return status;
+}
diff --git a/drivers/net/ixgbe/base/ixgbe_phy.h b/drivers/net/ixgbe/base/ixgbe_phy.h
new file mode 100644
index 00000000..1a5affe5
--- /dev/null
+++ b/drivers/net/ixgbe/base/ixgbe_phy.h
@@ -0,0 +1,214 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+    this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in the
+    documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+    contributors may be used to endorse or promote products derived from
+    this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#ifndef _IXGBE_PHY_H_
+#define _IXGBE_PHY_H_
+
+#include "ixgbe_type.h"
+#define IXGBE_I2C_EEPROM_DEV_ADDR	0xA0
+#define IXGBE_I2C_EEPROM_DEV_ADDR2	0xA2
+#define IXGBE_I2C_EEPROM_BANK_LEN	0xFF
+
+/* EEPROM byte offsets */
+#define IXGBE_SFF_IDENTIFIER		0x0
+#define IXGBE_SFF_IDENTIFIER_SFP	0x3
+#define IXGBE_SFF_VENDOR_OUI_BYTE0	0x25
+#define IXGBE_SFF_VENDOR_OUI_BYTE1	0x26
+#define IXGBE_SFF_VENDOR_OUI_BYTE2	0x27
+#define IXGBE_SFF_1GBE_COMP_CODES	0x6
+#define IXGBE_SFF_10GBE_COMP_CODES	0x3
+#define IXGBE_SFF_CABLE_TECHNOLOGY	0x8
+#define IXGBE_SFF_CABLE_SPEC_COMP	0x3C
+#define IXGBE_SFF_SFF_8472_SWAP		0x5C
+#define IXGBE_SFF_SFF_8472_COMP		0x5E
+#define IXGBE_SFF_SFF_8472_OSCB		0x6E
+#define IXGBE_SFF_SFF_8472_ESCB		0x76
+#define IXGBE_SFF_IDENTIFIER_QSFP_PLUS	0xD
+#define IXGBE_SFF_QSFP_VENDOR_OUI_BYTE0	0xA5
+#define IXGBE_SFF_QSFP_VENDOR_OUI_BYTE1	0xA6
+#define IXGBE_SFF_QSFP_VENDOR_OUI_BYTE2	0xA7
+#define IXGBE_SFF_QSFP_CONNECTOR	0x82
+#define IXGBE_SFF_QSFP_10GBE_COMP	0x83
+#define IXGBE_SFF_QSFP_1GBE_COMP	0x86
+#define IXGBE_SFF_QSFP_CABLE_LENGTH	0x92
+#define IXGBE_SFF_QSFP_DEVICE_TECH	0x93
+
+/* Bitmasks */
+#define IXGBE_SFF_DA_PASSIVE_CABLE	0x4
+#define IXGBE_SFF_DA_ACTIVE_CABLE	0x8
+#define IXGBE_SFF_DA_SPEC_ACTIVE_LIMITING	0x4
+#define IXGBE_SFF_1GBASESX_CAPABLE	0x1
+#define IXGBE_SFF_1GBASELX_CAPABLE	0x2
+#define IXGBE_SFF_1GBASET_CAPABLE	0x8
+#define IXGBE_SFF_10GBASESR_CAPABLE	0x10
+#define IXGBE_SFF_10GBASELR_CAPABLE	0x20
+#define IXGBE_SFF_SOFT_RS_SELECT_MASK	0x8
+#define IXGBE_SFF_SOFT_RS_SELECT_10G	0x8
+#define IXGBE_SFF_SOFT_RS_SELECT_1G	0x0
+#define IXGBE_SFF_ADDRESSING_MODE	0x4
+#define IXGBE_SFF_QSFP_DA_ACTIVE_CABLE	0x1
+#define IXGBE_SFF_QSFP_DA_PASSIVE_CABLE	0x8
+#define IXGBE_SFF_QSFP_CONNECTOR_NOT_SEPARABLE	0x23
+#define IXGBE_SFF_QSFP_TRANSMITER_850NM_VCSEL	0x0
+#define IXGBE_I2C_EEPROM_READ_MASK	0x100
+#define IXGBE_I2C_EEPROM_STATUS_MASK	0x3
+#define IXGBE_I2C_EEPROM_STATUS_NO_OPERATION	0x0
+#define IXGBE_I2C_EEPROM_STATUS_PASS	0x1
+#define IXGBE_I2C_EEPROM_STATUS_FAIL	0x2
+#define IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS	0x3
+
+#define IXGBE_CS4227			0xBE	/* CS4227 address */
+#define IXGBE_CS4227_GLOBAL_ID_LSB	0
+#define IXGBE_CS4227_SCRATCH		2
+#define IXGBE_CS4227_GLOBAL_ID_VALUE	0x03E5
+#define IXGBE_CS4227_RESET_PENDING	0x1357
+#define IXGBE_CS4227_RESET_COMPLETE	0x5AA5
+#define IXGBE_CS4227_RETRIES		15
+#define IXGBE_CS4227_EFUSE_STATUS	0x0181
+#define IXGBE_CS4227_LINE_SPARE22_MSB	0x12AD	/* Reg to program speed */
+#define IXGBE_CS4227_LINE_SPARE24_LSB	0x12B0	/* Reg to program EDC */
+#define IXGBE_CS4227_HOST_SPARE22_MSB	0x1AAD	/* Reg to program speed */
+#define IXGBE_CS4227_HOST_SPARE24_LSB	0x1AB0	/* Reg to program EDC */
+#define IXGBE_CS4227_EEPROM_STATUS	0x5001
+#define IXGBE_CS4227_EEPROM_LOAD_OK	0x0001
+#define IXGBE_CS4227_SPEED_1G		0x8000
+#define IXGBE_CS4227_SPEED_10G		0
+#define IXGBE_CS4227_EDC_MODE_CX1	0x0002
+#define IXGBE_CS4227_EDC_MODE_SR	0x0004
+#define IXGBE_CS4227_EDC_MODE_DIAG	0x0008
+#define IXGBE_CS4227_RESET_HOLD		500	/* microseconds */
+#define IXGBE_CS4227_RESET_DELAY	450	/* milliseconds */
+#define IXGBE_CS4227_CHECK_DELAY	30	/* milliseconds */
+#define IXGBE_PE			0xE0	/* Port expander address */
+#define IXGBE_PE_OUTPUT			1	/* Output register offset */
+#define IXGBE_PE_CONFIG			3	/* Config register offset */
+#define IXGBE_PE_BIT1			(1 << 1)
+
+/* Flow control defines */
+#define IXGBE_TAF_SYM_PAUSE		0x400
+#define IXGBE_TAF_ASM_PAUSE		0x800
+
+/* Bit-shift macros */
+#define IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT	24
+#define IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT	16
+#define IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT	8
+
+/* Vendor OUIs: format of OUI is 0x[byte0][byte1][byte2][00] */
+#define IXGBE_SFF_VENDOR_OUI_TYCO	0x00407600
+#define IXGBE_SFF_VENDOR_OUI_FTL	0x00906500
+#define IXGBE_SFF_VENDOR_OUI_AVAGO	0x00176A00
+#define IXGBE_SFF_VENDOR_OUI_INTEL	0x001B2100
+
+/* I2C SDA and SCL timing parameters for standard mode */
+#define IXGBE_I2C_T_HD_STA	4
+#define IXGBE_I2C_T_LOW		5
+#define IXGBE_I2C_T_HIGH	4
+#define IXGBE_I2C_T_SU_STA	5
+#define IXGBE_I2C_T_HD_DATA	5
+#define IXGBE_I2C_T_SU_DATA	1
+#define IXGBE_I2C_T_RISE	1
+#define IXGBE_I2C_T_FALL	1
+#define IXGBE_I2C_T_SU_STO	4
+#define IXGBE_I2C_T_BUF		5
+
+#ifndef IXGBE_SFP_DETECT_RETRIES
+#define IXGBE_SFP_DETECT_RETRIES	10
+
+#endif /* IXGBE_SFP_DETECT_RETRIES */
+#define IXGBE_TN_LASI_STATUS_REG	0x9005
+#define IXGBE_TN_LASI_STATUS_TEMP_ALARM	0x0008
+
+/* SFP+ SFF-8472 Compliance */
+#define IXGBE_SFF_SFF_8472_UNSUP	0x00
+
+s32 ixgbe_init_phy_ops_generic(struct ixgbe_hw *hw);
+bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr);
+enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id);
+s32 ixgbe_get_phy_id(struct ixgbe_hw *hw);
+s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw);
+s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw);
+s32 ixgbe_read_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
+			   u16 *phy_data);
+s32 ixgbe_write_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
+			    u16 phy_data);
+s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
+			       u32 device_type, u16 *phy_data);
+s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
+				u32 device_type, u16 phy_data);
+s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw);
+s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
+				       ixgbe_link_speed speed,
+				       bool autoneg_wait_to_complete);
+s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw,
+					       ixgbe_link_speed *speed,
+					       bool *autoneg);
+s32 ixgbe_check_reset_blocked(struct ixgbe_hw *hw);
+
+/* PHY specific */
+s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw,
+			     ixgbe_link_speed *speed,
+			     bool *link_up);
+s32 ixgbe_setup_phy_link_tnx(struct ixgbe_hw *hw);
+s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw,
+				       u16 *firmware_version);
+s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw,
+					   u16 *firmware_version);
+
+s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw);
+s32 ixgbe_set_copper_phy_power(struct ixgbe_hw *hw, bool on);
+s32 ixgbe_identify_module_generic(struct ixgbe_hw *hw);
+s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw);
+s32 ixgbe_get_supported_phy_sfp_layer_generic(struct ixgbe_hw *hw);
+s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw);
+s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
+					u16 *list_offset,
+					u16 *data_offset);
+s32 ixgbe_tn_check_overtemp(struct ixgbe_hw *hw);
+s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
+				u8 dev_addr, u8 *data);
+s32 ixgbe_read_i2c_byte_generic_unlocked(struct ixgbe_hw *hw, u8 byte_offset,
+					 u8 dev_addr, u8 *data);
+s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
+				 u8 dev_addr, u8 data);
+s32 ixgbe_write_i2c_byte_generic_unlocked(struct ixgbe_hw *hw, u8 byte_offset,
+					  u8 dev_addr, u8 data);
+s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
+				  u8 *eeprom_data);
+s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
+				   u8 eeprom_data);
+void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw);
+s32 ixgbe_read_i2c_combined_generic_int(struct ixgbe_hw *, u8 addr, u16 reg,
+					u16 *val, bool lock);
+s32 ixgbe_write_i2c_combined_generic_int(struct ixgbe_hw *, u8 addr, u16 reg,
+					 u16 val, bool lock);
+#endif /* _IXGBE_PHY_H_ */
diff --git a/drivers/net/ixgbe/base/ixgbe_type.h b/drivers/net/ixgbe/base/ixgbe_type.h
new file mode 100644
index 00000000..4dce2ac1
--- /dev/null
+++ b/drivers/net/ixgbe/base/ixgbe_type.h
@@ -0,0 +1,4121 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+    this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in the
+    documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+    contributors may be used to endorse or promote products derived from
+    this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#ifndef _IXGBE_TYPE_H_
+#define _IXGBE_TYPE_H_
+
+/*
+ * The following is a brief description of the error categories used by the
+ * ERROR_REPORT* macros.
+ *
+ * - IXGBE_ERROR_INVALID_STATE
+ * This category is for errors which represent a serious failure state that is
+ * unexpected, and could be potentially harmful to device operation. It should
+ * not be used for errors relating to issues that can be worked around or
+ * ignored.
+ *
+ * - IXGBE_ERROR_POLLING
+ * This category is for errors related to polling/timeout issues and should be
+ * used in any case where the timeout occured, or a failure to obtain a lock, or
+ * failure to receive data within the time limit.
+ *
+ * - IXGBE_ERROR_CAUTION
+ * This category should be used for reporting issues that may be the cause of
+ * other errors, such as temperature warnings. It should indicate an event which
+ * could be serious, but hasn't necessarily caused problems yet.
+ *
+ * - IXGBE_ERROR_SOFTWARE
+ * This category is intended for errors due to software state preventing
+ * something. The category is not intended for errors due to bad arguments, or
+ * due to unsupported features. It should be used when a state occurs which
+ * prevents action but is not a serious issue.
+ *
+ * - IXGBE_ERROR_ARGUMENT
+ * This category is for when a bad or invalid argument is passed. It should be
+ * used whenever a function is called and error checking has detected the
+ * argument is wrong or incorrect.
+ *
+ * - IXGBE_ERROR_UNSUPPORTED
+ * This category is for errors which are due to unsupported circumstances or
+ * configuration issues. It should not be used when the issue is due to an
+ * invalid argument, but for when something has occurred that is unsupported
+ * (Ex: Flow control autonegotiation or an unsupported SFP+ module.)
+ */
+
+#include "ixgbe_osdep.h"
+
+/* Override this by setting IOMEM in your ixgbe_osdep.h header */
+
+/* Vendor ID */
+#define IXGBE_INTEL_VENDOR_ID			0x8086
+
+/* Device IDs */
+#define IXGBE_DEV_ID_82598			0x10B6
+#define IXGBE_DEV_ID_82598_BX			0x1508
+#define IXGBE_DEV_ID_82598AF_DUAL_PORT		0x10C6
+#define IXGBE_DEV_ID_82598AF_SINGLE_PORT	0x10C7
+#define IXGBE_DEV_ID_82598AT			0x10C8
+#define IXGBE_DEV_ID_82598AT2			0x150B
+#define IXGBE_DEV_ID_82598EB_SFP_LOM		0x10DB
+#define IXGBE_DEV_ID_82598EB_CX4		0x10DD
+#define IXGBE_DEV_ID_82598_CX4_DUAL_PORT	0x10EC
+#define IXGBE_DEV_ID_82598_DA_DUAL_PORT		0x10F1
+#define IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM	0x10E1
+#define IXGBE_DEV_ID_82598EB_XF_LR		0x10F4
+#define IXGBE_DEV_ID_82599_KX4			0x10F7
+#define IXGBE_DEV_ID_82599_KX4_MEZZ		0x1514
+#define IXGBE_DEV_ID_82599_KR			0x1517
+#define IXGBE_DEV_ID_82599_COMBO_BACKPLANE	0x10F8
+#define IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ	0x000C
+#define IXGBE_DEV_ID_82599_CX4			0x10F9
+#define IXGBE_DEV_ID_82599_SFP			0x10FB
+#define IXGBE_SUBDEV_ID_82599_SFP		0x11A9
+#define IXGBE_SUBDEV_ID_82599_SFP_WOL0		0x1071
+#define IXGBE_SUBDEV_ID_82599_RNDC		0x1F72
+#define IXGBE_SUBDEV_ID_82599_560FLR		0x17D0
+#define IXGBE_SUBDEV_ID_82599_ECNA_DP		0x0470
+#define IXGBE_SUBDEV_ID_82599_SP_560FLR		0x211B
+#define IXGBE_SUBDEV_ID_82599_LOM_SFP		0x8976
+#define IXGBE_SUBDEV_ID_82599_LOM_SNAP6		0x2159
+#define IXGBE_SUBDEV_ID_82599_SFP_1OCP		0x000D
+#define IXGBE_SUBDEV_ID_82599_SFP_2OCP		0x0008
+#define IXGBE_SUBDEV_ID_82599_SFP_LOM		0x06EE
+#define IXGBE_DEV_ID_82599_BACKPLANE_FCOE	0x152A
+#define IXGBE_DEV_ID_82599_SFP_FCOE		0x1529
+#define IXGBE_DEV_ID_82599_SFP_EM		0x1507
+#define IXGBE_DEV_ID_82599_SFP_SF2		0x154D
+#define IXGBE_DEV_ID_82599_SFP_SF_QP		0x154A
+#define IXGBE_DEV_ID_82599_QSFP_SF_QP		0x1558
+#define IXGBE_DEV_ID_82599EN_SFP		0x1557
+#define IXGBE_SUBDEV_ID_82599EN_SFP_OCP1	0x0001
+#define IXGBE_DEV_ID_82599_XAUI_LOM		0x10FC
+#define IXGBE_DEV_ID_82599_T3_LOM		0x151C
+#define IXGBE_DEV_ID_82599_VF			0x10ED
+#define IXGBE_DEV_ID_82599_VF_HV		0x152E
+#define IXGBE_DEV_ID_82599_LS			0x154F
+#define IXGBE_DEV_ID_X540T			0x1528
+#define IXGBE_DEV_ID_X540_VF			0x1515
+#define IXGBE_DEV_ID_X540_VF_HV			0x1530
+#define IXGBE_DEV_ID_X540T1			0x1560
+#define IXGBE_DEV_ID_X550T			0x1563
+#define IXGBE_DEV_ID_X550T1			0x15D1
+/* Placeholder value, pending official value. */
+#define IXGBE_DEV_ID_X550EM_A_KR		0x15C2
+#define IXGBE_DEV_ID_X550EM_A_KR_L		0x15C3
+#define IXGBE_DEV_ID_X550EM_A_SFP_N		0x15C4
+#define IXGBE_DEV_ID_X550EM_A_1G_T		0x15C6
+#define IXGBE_DEV_ID_X550EM_A_1G_T_L		0x15C7
+#define IXGBE_DEV_ID_X550EM_A_10G_T		0x15C8
+#define IXGBE_DEV_ID_X550EM_A_QSFP		0x15CA
+#define IXGBE_DEV_ID_X550EM_A_QSFP_N		0x15CC
+#define IXGBE_DEV_ID_X550EM_A_SFP		0x15CE
+#define IXGBE_DEV_ID_X550EM_X_KX4		0x15AA
+#define IXGBE_DEV_ID_X550EM_X_KR		0x15AB
+#define IXGBE_DEV_ID_X550EM_X_SFP		0x15AC
+#define IXGBE_DEV_ID_X550EM_X_10G_T		0x15AD
+#define IXGBE_DEV_ID_X550EM_X_1G_T		0x15AE
+#define IXGBE_DEV_ID_X550_VF_HV			0x1564
+#define IXGBE_DEV_ID_X550_VF			0x1565
+#define IXGBE_DEV_ID_X550EM_A_VF		0x15C5
+#define IXGBE_DEV_ID_X550EM_A_VF_HV		0x15B4
+#define IXGBE_DEV_ID_X550EM_X_VF		0x15A8
+#define IXGBE_DEV_ID_X550EM_X_VF_HV		0x15A9
+
+#define IXGBE_CAT(r, m) IXGBE_##r##m
+
+#define IXGBE_BY_MAC(_hw, r) ((_hw)->mvals[IXGBE_CAT(r, _IDX)])
+
+/* General Registers */
+#define IXGBE_CTRL		0x00000
+#define IXGBE_STATUS		0x00008
+#define IXGBE_CTRL_EXT		0x00018
+#define IXGBE_ESDP		0x00020
+#define IXGBE_EODSDP		0x00028
+#define IXGBE_I2CCTL_82599	0x00028
+#define IXGBE_I2CCTL		IXGBE_I2CCTL_82599
+#define IXGBE_I2CCTL_X540	IXGBE_I2CCTL_82599
+#define IXGBE_I2CCTL_X550	0x15F5C
+#define IXGBE_I2CCTL_X550EM_x	IXGBE_I2CCTL_X550
+#define IXGBE_I2CCTL_X550EM_a	IXGBE_I2CCTL_X550
+#define IXGBE_I2CCTL_BY_MAC(_hw) IXGBE_BY_MAC((_hw), I2CCTL)
+#define IXGBE_PHY_GPIO		0x00028
+#define IXGBE_MAC_GPIO		0x00030
+#define IXGBE_PHYINT_STATUS0	0x00100
+#define IXGBE_PHYINT_STATUS1	0x00104
+#define IXGBE_PHYINT_STATUS2	0x00108
+#define IXGBE_LEDCTL		0x00200
+#define IXGBE_FRTIMER		0x00048
+#define IXGBE_TCPTIMER		0x0004C
+#define IXGBE_CORESPARE		0x00600
+#define IXGBE_EXVET		0x05078
+
+/* NVM Registers */
+#define IXGBE_EEC		0x10010
+#define IXGBE_EEC_X540		IXGBE_EEC
+#define IXGBE_EEC_X550		IXGBE_EEC
+#define IXGBE_EEC_X550EM_x	IXGBE_EEC
+#define IXGBE_EEC_X550EM_a	0x15FF8
+#define IXGBE_EEC_BY_MAC(_hw)	IXGBE_BY_MAC((_hw), EEC)
+
+#define IXGBE_EERD		0x10014
+#define IXGBE_EEWR		0x10018
+
+#define IXGBE_FLA		0x1001C
+#define IXGBE_FLA_X540		IXGBE_FLA
+#define IXGBE_FLA_X550		IXGBE_FLA
+#define IXGBE_FLA_X550EM_x	IXGBE_FLA
+#define IXGBE_FLA_X550EM_a	0x15F6C
+#define IXGBE_FLA_BY_MAC(_hw)	IXGBE_BY_MAC((_hw), FLA)
+
+#define IXGBE_EEMNGCTL	0x10110
+#define IXGBE_EEMNGDATA	0x10114
+#define IXGBE_FLMNGCTL	0x10118
+#define IXGBE_FLMNGDATA	0x1011C
+#define IXGBE_FLMNGCNT	0x10120
+#define IXGBE_FLOP	0x1013C
+
+#define IXGBE_GRC		0x10200
+#define IXGBE_GRC_X540		IXGBE_GRC
+#define IXGBE_GRC_X550		IXGBE_GRC
+#define IXGBE_GRC_X550EM_x	IXGBE_GRC
+#define IXGBE_GRC_X550EM_a	0x15F64
+#define IXGBE_GRC_BY_MAC(_hw)	IXGBE_BY_MAC((_hw), GRC)
+
+#define IXGBE_SRAMREL		0x10210
+#define IXGBE_SRAMREL_X540	IXGBE_SRAMREL
+#define IXGBE_SRAMREL_X550	IXGBE_SRAMREL
+#define IXGBE_SRAMREL_X550EM_x	IXGBE_SRAMREL
+#define IXGBE_SRAMREL_X550EM_a	0x15F6C
+#define IXGBE_SRAMREL_BY_MAC(_hw)	IXGBE_BY_MAC((_hw), SRAMREL)
+
+#define IXGBE_PHYDBG	0x10218
+
+/* General Receive Control */
+#define IXGBE_GRC_MNG	0x00000001 /* Manageability Enable */
+#define IXGBE_GRC_APME	0x00000002 /* APM enabled in EEPROM */
+
+#define IXGBE_VPDDIAG0	0x10204
+#define IXGBE_VPDDIAG1	0x10208
+
+/* I2CCTL Bit Masks */
+#define IXGBE_I2C_CLK_IN		0x00000001
+#define IXGBE_I2C_CLK_IN_X540		IXGBE_I2C_CLK_IN
+#define IXGBE_I2C_CLK_IN_X550		0x00004000
+#define IXGBE_I2C_CLK_IN_X550EM_x	IXGBE_I2C_CLK_IN_X550
+#define IXGBE_I2C_CLK_IN_X550EM_a	IXGBE_I2C_CLK_IN_X550
+#define IXGBE_I2C_CLK_IN_BY_MAC(_hw)	IXGBE_BY_MAC((_hw), I2C_CLK_IN)
+
+#define IXGBE_I2C_CLK_OUT		0x00000002
+#define IXGBE_I2C_CLK_OUT_X540		IXGBE_I2C_CLK_OUT
+#define IXGBE_I2C_CLK_OUT_X550		0x00000200
+#define IXGBE_I2C_CLK_OUT_X550EM_x	IXGBE_I2C_CLK_OUT_X550
+#define IXGBE_I2C_CLK_OUT_X550EM_a	IXGBE_I2C_CLK_OUT_X550
+#define IXGBE_I2C_CLK_OUT_BY_MAC(_hw)	IXGBE_BY_MAC((_hw), I2C_CLK_OUT)
+
+#define IXGBE_I2C_DATA_IN		0x00000004
+#define IXGBE_I2C_DATA_IN_X540		IXGBE_I2C_DATA_IN
+#define IXGBE_I2C_DATA_IN_X550		0x00001000
+#define IXGBE_I2C_DATA_IN_X550EM_x	IXGBE_I2C_DATA_IN_X550
+#define IXGBE_I2C_DATA_IN_X550EM_a	IXGBE_I2C_DATA_IN_X550
+#define IXGBE_I2C_DATA_IN_BY_MAC(_hw)	IXGBE_BY_MAC((_hw), I2C_DATA_IN)
+
+#define IXGBE_I2C_DATA_OUT		0x00000008
+#define IXGBE_I2C_DATA_OUT_X540		IXGBE_I2C_DATA_OUT
+#define IXGBE_I2C_DATA_OUT_X550		0x00000400
+#define IXGBE_I2C_DATA_OUT_X550EM_x	IXGBE_I2C_DATA_OUT_X550
+#define IXGBE_I2C_DATA_OUT_X550EM_a	IXGBE_I2C_DATA_OUT_X550
+#define IXGBE_I2C_DATA_OUT_BY_MAC(_hw)	IXGBE_BY_MAC((_hw), I2C_DATA_OUT)
+
+#define IXGBE_I2C_DATA_OE_N_EN		0
+#define IXGBE_I2C_DATA_OE_N_EN_X540	IXGBE_I2C_DATA_OE_N_EN
+#define IXGBE_I2C_DATA_OE_N_EN_X550	0x00000800
+#define IXGBE_I2C_DATA_OE_N_EN_X550EM_x	IXGBE_I2C_DATA_OE_N_EN_X550
+#define IXGBE_I2C_DATA_OE_N_EN_X550EM_a	IXGBE_I2C_DATA_OE_N_EN_X550
+#define IXGBE_I2C_DATA_OE_N_EN_BY_MAC(_hw) IXGBE_BY_MAC((_hw), I2C_DATA_OE_N_EN)
+
+#define IXGBE_I2C_BB_EN			0
+#define IXGBE_I2C_BB_EN_X540		IXGBE_I2C_BB_EN
+#define IXGBE_I2C_BB_EN_X550		0x00000100
+#define IXGBE_I2C_BB_EN_X550EM_x	IXGBE_I2C_BB_EN_X550
+#define IXGBE_I2C_BB_EN_X550EM_a	IXGBE_I2C_BB_EN_X550
+
+#define IXGBE_I2C_BB_EN_BY_MAC(_hw)	IXGBE_BY_MAC((_hw), I2C_BB_EN)
+
+#define IXGBE_I2C_CLK_OE_N_EN		0
+#define IXGBE_I2C_CLK_OE_N_EN_X540	IXGBE_I2C_CLK_OE_N_EN
+#define IXGBE_I2C_CLK_OE_N_EN_X550	0x00002000
+#define IXGBE_I2C_CLK_OE_N_EN_X550EM_x	IXGBE_I2C_CLK_OE_N_EN_X550
+#define IXGBE_I2C_CLK_OE_N_EN_X550EM_a	IXGBE_I2C_CLK_OE_N_EN_X550
+#define IXGBE_I2C_CLK_OE_N_EN_BY_MAC(_hw) IXGBE_BY_MAC((_hw), I2C_CLK_OE_N_EN)
+#define IXGBE_I2C_CLOCK_STRETCHING_TIMEOUT	500
+
+#define IXGBE_I2C_THERMAL_SENSOR_ADDR	0xF8
+#define IXGBE_EMC_INTERNAL_DATA		0x00
+#define IXGBE_EMC_INTERNAL_THERM_LIMIT	0x20
+#define IXGBE_EMC_DIODE1_DATA		0x01
+#define IXGBE_EMC_DIODE1_THERM_LIMIT	0x19
+#define IXGBE_EMC_DIODE2_DATA		0x23
+#define IXGBE_EMC_DIODE2_THERM_LIMIT	0x1A
+
+#define IXGBE_MAX_SENSORS		3
+
+struct ixgbe_thermal_diode_data {
+	u8 location;
+	u8 temp;
+	u8 caution_thresh;
+	u8 max_op_thresh;
+};
+
+struct ixgbe_thermal_sensor_data {
+	struct ixgbe_thermal_diode_data sensor[IXGBE_MAX_SENSORS];
+};
+
+/* Interrupt Registers */
+#define IXGBE_EICR		0x00800
+#define IXGBE_EICS		0x00808
+#define IXGBE_EIMS		0x00880
+#define IXGBE_EIMC		0x00888
+#define IXGBE_EIAC		0x00810
+#define IXGBE_EIAM		0x00890
+#define IXGBE_EICS_EX(_i)	(0x00A90 + (_i) * 4)
+#define IXGBE_EIMS_EX(_i)	(0x00AA0 + (_i) * 4)
+#define IXGBE_EIMC_EX(_i)	(0x00AB0 + (_i) * 4)
+#define IXGBE_EIAM_EX(_i)	(0x00AD0 + (_i) * 4)
+/* 82599 EITR is only 12 bits, with the lower 3 always zero */
+/*
+ * 82598 EITR is 16 bits but set the limits based on the max
+ * supported by all ixgbe hardware
+ */
+#define IXGBE_MAX_INT_RATE	488281
+#define IXGBE_MIN_INT_RATE	956
+#define IXGBE_MAX_EITR		0x00000FF8
+#define IXGBE_MIN_EITR		8
+#define IXGBE_EITR(_i)		(((_i) <= 23) ? (0x00820 + ((_i) * 4)) : \
+				 (0x012300 + (((_i) - 24) * 4)))
+#define IXGBE_EITR_ITR_INT_MASK	0x00000FF8
+#define IXGBE_EITR_LLI_MOD	0x00008000
+#define IXGBE_EITR_CNT_WDIS	0x80000000
+#define IXGBE_IVAR(_i)		(0x00900 + ((_i) * 4)) /* 24 at 0x900-0x960 */
+#define IXGBE_IVAR_MISC		0x00A00 /* misc MSI-X interrupt causes */
+#define IXGBE_EITRSEL		0x00894
+#define IXGBE_MSIXT		0x00000 /* MSI-X Table. 0x0000 - 0x01C */
+#define IXGBE_MSIXPBA		0x02000 /* MSI-X Pending bit array */
+#define IXGBE_PBACL(_i)	(((_i) == 0) ? (0x11068) : (0x110C0 + ((_i) * 4)))
+#define IXGBE_GPIE		0x00898
+
+/* Flow Control Registers */
+#define IXGBE_FCADBUL		0x03210
+#define IXGBE_FCADBUH		0x03214
+#define IXGBE_FCAMACL		0x04328
+#define IXGBE_FCAMACH		0x0432C
+#define IXGBE_FCRTH_82599(_i)	(0x03260 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_FCRTL_82599(_i)	(0x03220 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_PFCTOP		0x03008
+#define IXGBE_FCTTV(_i)		(0x03200 + ((_i) * 4)) /* 4 of these (0-3) */
+#define IXGBE_FCRTL(_i)		(0x03220 + ((_i) * 8)) /* 8 of these (0-7) */
+#define IXGBE_FCRTH(_i)		(0x03260 + ((_i) * 8)) /* 8 of these (0-7) */
+#define IXGBE_FCRTV		0x032A0
+#define IXGBE_FCCFG		0x03D00
+#define IXGBE_TFCS		0x0CE00
+
+/* Receive DMA Registers */
+#define IXGBE_RDBAL(_i)	(((_i) < 64) ? (0x01000 + ((_i) * 0x40)) : \
+			 (0x0D000 + (((_i) - 64) * 0x40)))
+#define IXGBE_RDBAH(_i)	(((_i) < 64) ? (0x01004 + ((_i) * 0x40)) : \
+			 (0x0D004 + (((_i) - 64) * 0x40)))
+#define IXGBE_RDLEN(_i)	(((_i) < 64) ? (0x01008 + ((_i) * 0x40)) : \
+			 (0x0D008 + (((_i) - 64) * 0x40)))
+#define IXGBE_RDH(_i)	(((_i) < 64) ? (0x01010 + ((_i) * 0x40)) : \
+			 (0x0D010 + (((_i) - 64) * 0x40)))
+#define IXGBE_RDT(_i)	(((_i) < 64) ? (0x01018 + ((_i) * 0x40)) : \
+			 (0x0D018 + (((_i) - 64) * 0x40)))
+#define IXGBE_RXDCTL(_i)	(((_i) < 64) ? (0x01028 + ((_i) * 0x40)) : \
+				 (0x0D028 + (((_i) - 64) * 0x40)))
+#define IXGBE_RSCCTL(_i)	(((_i) < 64) ? (0x0102C + ((_i) * 0x40)) : \
+				 (0x0D02C + (((_i) - 64) * 0x40)))
+#define IXGBE_RSCDBU	0x03028
+#define IXGBE_RDDCC	0x02F20
+#define IXGBE_RXMEMWRAP	0x03190
+#define IXGBE_STARCTRL	0x03024
+/*
+ * Split and Replication Receive Control Registers
+ * 00-15 : 0x02100 + n*4
+ * 16-64 : 0x01014 + n*0x40
+ * 64-127: 0x0D014 + (n-64)*0x40
+ */
+#define IXGBE_SRRCTL(_i)	(((_i) <= 15) ? (0x02100 + ((_i) * 4)) : \
+				 (((_i) < 64) ? (0x01014 + ((_i) * 0x40)) : \
+				 (0x0D014 + (((_i) - 64) * 0x40))))
+/*
+ * Rx DCA Control Register:
+ * 00-15 : 0x02200 + n*4
+ * 16-64 : 0x0100C + n*0x40
+ * 64-127: 0x0D00C + (n-64)*0x40
+ */
+#define IXGBE_DCA_RXCTRL(_i)	(((_i) <= 15) ? (0x02200 + ((_i) * 4)) : \
+				 (((_i) < 64) ? (0x0100C + ((_i) * 0x40)) : \
+				 (0x0D00C + (((_i) - 64) * 0x40))))
+#define IXGBE_RDRXCTL		0x02F00
+/* 8 of these 0x03C00 - 0x03C1C */
+#define IXGBE_RXPBSIZE(_i)	(0x03C00 + ((_i) * 4))
+#define IXGBE_RXCTRL		0x03000
+#define IXGBE_DROPEN		0x03D04
+#define IXGBE_RXPBSIZE_SHIFT	10
+#define IXGBE_RXPBSIZE_MASK	0x000FFC00
+
+/* Receive Registers */
+#define IXGBE_RXCSUM		0x05000
+#define IXGBE_RFCTL		0x05008
+#define IXGBE_DRECCCTL		0x02F08
+#define IXGBE_DRECCCTL_DISABLE	0
+#define IXGBE_DRECCCTL2		0x02F8C
+
+/* Multicast Table Array - 128 entries */
+#define IXGBE_MTA(_i)		(0x05200 + ((_i) * 4))
+#define IXGBE_RAL(_i)		(((_i) <= 15) ? (0x05400 + ((_i) * 8)) : \
+				 (0x0A200 + ((_i) * 8)))
+#define IXGBE_RAH(_i)		(((_i) <= 15) ? (0x05404 + ((_i) * 8)) : \
+				 (0x0A204 + ((_i) * 8)))
+#define IXGBE_MPSAR_LO(_i)	(0x0A600 + ((_i) * 8))
+#define IXGBE_MPSAR_HI(_i)	(0x0A604 + ((_i) * 8))
+/* Packet split receive type */
+#define IXGBE_PSRTYPE(_i)	(((_i) <= 15) ? (0x05480 + ((_i) * 4)) : \
+				 (0x0EA00 + ((_i) * 4)))
+/* array of 4096 1-bit vlan filters */
+#define IXGBE_VFTA(_i)		(0x0A000 + ((_i) * 4))
+/*array of 4096 4-bit vlan vmdq indices */
+#define IXGBE_VFTAVIND(_j, _i)	(0x0A200 + ((_j) * 0x200) + ((_i) * 4))
+#define IXGBE_FCTRL		0x05080
+#define IXGBE_VLNCTRL		0x05088
+#define IXGBE_MCSTCTRL		0x05090
+#define IXGBE_MRQC		0x05818
+#define IXGBE_SAQF(_i)	(0x0E000 + ((_i) * 4)) /* Source Address Queue Filter */
+#define IXGBE_DAQF(_i)	(0x0E200 + ((_i) * 4)) /* Dest. Address Queue Filter */
+#define IXGBE_SDPQF(_i)	(0x0E400 + ((_i) * 4)) /* Src Dest. Addr Queue Filter */
+#define IXGBE_FTQF(_i)	(0x0E600 + ((_i) * 4)) /* Five Tuple Queue Filter */
+#define IXGBE_ETQF(_i)	(0x05128 + ((_i) * 4)) /* EType Queue Filter */
+#define IXGBE_ETQS(_i)	(0x0EC00 + ((_i) * 4)) /* EType Queue Select */
+#define IXGBE_SYNQF	0x0EC30 /* SYN Packet Queue Filter */
+#define IXGBE_RQTC	0x0EC70
+#define IXGBE_MTQC	0x08120
+#define IXGBE_VLVF(_i)	(0x0F100 + ((_i) * 4))  /* 64 of these (0-63) */
+#define IXGBE_VLVFB(_i)	(0x0F200 + ((_i) * 4))  /* 128 of these (0-127) */
+#define IXGBE_VMVIR(_i)	(0x08000 + ((_i) * 4))  /* 64 of these (0-63) */
+#define IXGBE_PFFLPL		0x050B0
+#define IXGBE_PFFLPH		0x050B4
+#define IXGBE_VT_CTL		0x051B0
+#define IXGBE_PFMAILBOX(_i)	(0x04B00 + (4 * (_i))) /* 64 total */
+/* 64 Mailboxes, 16 DW each */
+#define IXGBE_PFMBMEM(_i)	(0x13000 + (64 * (_i)))
+#define IXGBE_PFMBICR(_i)	(0x00710 + (4 * (_i))) /* 4 total */
+#define IXGBE_PFMBIMR(_i)	(0x00720 + (4 * (_i))) /* 4 total */
+#define IXGBE_VFRE(_i)		(0x051E0 + ((_i) * 4))
+#define IXGBE_VFTE(_i)		(0x08110 + ((_i) * 4))
+#define IXGBE_VMECM(_i)		(0x08790 + ((_i) * 4))
+#define IXGBE_QDE		0x2F04
+#define IXGBE_VMTXSW(_i)	(0x05180 + ((_i) * 4)) /* 2 total */
+#define IXGBE_VMOLR(_i)		(0x0F000 + ((_i) * 4)) /* 64 total */
+#define IXGBE_UTA(_i)		(0x0F400 + ((_i) * 4))
+#define IXGBE_MRCTL(_i)		(0x0F600 + ((_i) * 4))
+#define IXGBE_VMRVLAN(_i)	(0x0F610 + ((_i) * 4))
+#define IXGBE_VMRVM(_i)		(0x0F630 + ((_i) * 4))
+#define IXGBE_LVMMC_RX		0x2FA8
+#define IXGBE_LVMMC_TX		0x8108
+#define IXGBE_LMVM_RX		0x2FA4
+#define IXGBE_LMVM_TX		0x8124
+#define IXGBE_WQBR_RX(_i)	(0x2FB0 + ((_i) * 4)) /* 4 total */
+#define IXGBE_WQBR_TX(_i)	(0x8130 + ((_i) * 4)) /* 4 total */
+#define IXGBE_L34T_IMIR(_i)	(0x0E800 + ((_i) * 4)) /*128 of these (0-127)*/
+#define IXGBE_RXFECCERR0	0x051B8
+#define IXGBE_LLITHRESH		0x0EC90
+#define IXGBE_IMIR(_i)		(0x05A80 + ((_i) * 4))  /* 8 of these (0-7) */
+#define IXGBE_IMIREXT(_i)	(0x05AA0 + ((_i) * 4))  /* 8 of these (0-7) */
+#define IXGBE_IMIRVP		0x05AC0
+#define IXGBE_VMD_CTL		0x0581C
+#define IXGBE_RETA(_i)		(0x05C00 + ((_i) * 4))  /* 32 of these (0-31) */
+#define IXGBE_ERETA(_i)		(0x0EE80 + ((_i) * 4))  /* 96 of these (0-95) */
+#define IXGBE_RSSRK(_i)		(0x05C80 + ((_i) * 4))  /* 10 of these (0-9) */
+
+/* Registers for setting up RSS on X550 with SRIOV
+ * _p - pool number (0..63)
+ * _i - index (0..10 for PFVFRSSRK, 0..15 for PFVFRETA)
+ */
+#define IXGBE_PFVFMRQC(_p)	(0x03400 + ((_p) * 4))
+#define IXGBE_PFVFRSSRK(_i, _p)	(0x018000 + ((_i) * 4) + ((_p) * 0x40))
+#define IXGBE_PFVFRETA(_i, _p)	(0x019000 + ((_i) * 4) + ((_p) * 0x40))
+
+/* Flow Director registers */
+#define IXGBE_FDIRCTRL	0x0EE00
+#define IXGBE_FDIRHKEY	0x0EE68
+#define IXGBE_FDIRSKEY	0x0EE6C
+#define IXGBE_FDIRDIP4M	0x0EE3C
+#define IXGBE_FDIRSIP4M	0x0EE40
+#define IXGBE_FDIRTCPM	0x0EE44
+#define IXGBE_FDIRUDPM	0x0EE48
+#define IXGBE_FDIRSCTPM	0x0EE78
+#define IXGBE_FDIRIP6M	0x0EE74
+#define IXGBE_FDIRM	0x0EE70
+
+/* Flow Director Stats registers */
+#define IXGBE_FDIRFREE	0x0EE38
+#define IXGBE_FDIRLEN	0x0EE4C
+#define IXGBE_FDIRUSTAT	0x0EE50
+#define IXGBE_FDIRFSTAT	0x0EE54
+#define IXGBE_FDIRMATCH	0x0EE58
+#define IXGBE_FDIRMISS	0x0EE5C
+
+/* Flow Director Programming registers */
+#define IXGBE_FDIRSIPv6(_i) (0x0EE0C + ((_i) * 4)) /* 3 of these (0-2) */
+#define IXGBE_FDIRIPSA	0x0EE18
+#define IXGBE_FDIRIPDA	0x0EE1C
+#define IXGBE_FDIRPORT	0x0EE20
+#define IXGBE_FDIRVLAN	0x0EE24
+#define IXGBE_FDIRHASH	0x0EE28
+#define IXGBE_FDIRCMD	0x0EE2C
+
+/* Transmit DMA registers */
+#define IXGBE_TDBAL(_i)		(0x06000 + ((_i) * 0x40)) /* 32 of them (0-31)*/
+#define IXGBE_TDBAH(_i)		(0x06004 + ((_i) * 0x40))
+#define IXGBE_TDLEN(_i)		(0x06008 + ((_i) * 0x40))
+#define IXGBE_TDH(_i)		(0x06010 + ((_i) * 0x40))
+#define IXGBE_TDT(_i)		(0x06018 + ((_i) * 0x40))
+#define IXGBE_TXDCTL(_i)	(0x06028 + ((_i) * 0x40))
+#define IXGBE_TDWBAL(_i)	(0x06038 + ((_i) * 0x40))
+#define IXGBE_TDWBAH(_i)	(0x0603C + ((_i) * 0x40))
+#define IXGBE_DTXCTL		0x07E00
+
+#define IXGBE_DMATXCTL		0x04A80
+#define IXGBE_PFVFSPOOF(_i)	(0x08200 + ((_i) * 4)) /* 8 of these 0 - 7 */
+#define IXGBE_PFDTXGSWC		0x08220
+#define IXGBE_DTXMXSZRQ		0x08100
+#define IXGBE_DTXTCPFLGL	0x04A88
+#define IXGBE_DTXTCPFLGH	0x04A8C
+#define IXGBE_LBDRPEN		0x0CA00
+#define IXGBE_TXPBTHRESH(_i)	(0x04950 + ((_i) * 4)) /* 8 of these 0 - 7 */
+
+#define IXGBE_DMATXCTL_TE	0x1 /* Transmit Enable */
+#define IXGBE_DMATXCTL_NS	0x2 /* No Snoop LSO hdr buffer */
+#define IXGBE_DMATXCTL_GDV	0x8 /* Global Double VLAN */
+#define IXGBE_DMATXCTL_MDP_EN	0x20 /* Bit 5 */
+#define IXGBE_DMATXCTL_MBINTEN	0x40 /* Bit 6 */
+#define IXGBE_DMATXCTL_VT_SHIFT	16  /* VLAN EtherType */
+
+#define IXGBE_PFDTXGSWC_VT_LBEN	0x1 /* Local L2 VT switch enable */
+
+/* Anti-spoofing defines */
+#define IXGBE_SPOOF_MACAS_MASK		0xFF
+#define IXGBE_SPOOF_VLANAS_MASK		0xFF00
+#define IXGBE_SPOOF_VLANAS_SHIFT	8
+#define IXGBE_SPOOF_ETHERTYPEAS		0xFF000000
+#define IXGBE_SPOOF_ETHERTYPEAS_SHIFT	16
+#define IXGBE_PFVFSPOOF_REG_COUNT	8
+/* 16 of these (0-15) */
+#define IXGBE_DCA_TXCTRL(_i)		(0x07200 + ((_i) * 4))
+/* Tx DCA Control register : 128 of these (0-127) */
+#define IXGBE_DCA_TXCTRL_82599(_i)	(0x0600C + ((_i) * 0x40))
+#define IXGBE_TIPG			0x0CB00
+#define IXGBE_TXPBSIZE(_i)		(0x0CC00 + ((_i) * 4)) /* 8 of these */
+#define IXGBE_MNGTXMAP			0x0CD10
+#define IXGBE_TIPG_FIBER_DEFAULT	3
+#define IXGBE_TXPBSIZE_SHIFT		10
+
+/* Wake up registers */
+#define IXGBE_WUC	0x05800
+#define IXGBE_WUFC	0x05808
+#define IXGBE_WUS	0x05810
+#define IXGBE_IPAV	0x05838
+#define IXGBE_IP4AT	0x05840 /* IPv4 table 0x5840-0x5858 */
+#define IXGBE_IP6AT	0x05880 /* IPv6 table 0x5880-0x588F */
+
+#define IXGBE_WUPL	0x05900
+#define IXGBE_WUPM	0x05A00 /* wake up pkt memory 0x5A00-0x5A7C */
+#define IXGBE_PROXYS	0x05F60 /* Proxying Status Register */
+#define IXGBE_PROXYFC	0x05F64 /* Proxying Filter Control Register */
+#define IXGBE_VXLANCTRL	0x0000507C /* Rx filter VXLAN UDPPORT Register */
+
+#define IXGBE_FHFT(_n)	(0x09000 + ((_n) * 0x100)) /* Flex host filter table */
+/* Ext Flexible Host Filter Table */
+#define IXGBE_FHFT_EXT(_n)	(0x09800 + ((_n) * 0x100))
+#define IXGBE_FHFT_EXT_X550(_n)	(0x09600 + ((_n) * 0x100))
+
+/* Four Flexible Filters are supported */
+#define IXGBE_FLEXIBLE_FILTER_COUNT_MAX		4
+
+/* Six Flexible Filters are supported */
+#define IXGBE_FLEXIBLE_FILTER_COUNT_MAX_6	6
+/* Eight Flexible Filters are supported */
+#define IXGBE_FLEXIBLE_FILTER_COUNT_MAX_8	8
+#define IXGBE_EXT_FLEXIBLE_FILTER_COUNT_MAX	2
+
+/* Each Flexible Filter is at most 128 (0x80) bytes in length */
+#define IXGBE_FLEXIBLE_FILTER_SIZE_MAX		128
+#define IXGBE_FHFT_LENGTH_OFFSET		0xFC  /* Length byte in FHFT */
+#define IXGBE_FHFT_LENGTH_MASK			0x0FF /* Length in lower byte */
+
+/* Definitions for power management and wakeup registers */
+/* Wake Up Control */
+#define IXGBE_WUC_PME_EN	0x00000002 /* PME Enable */
+#define IXGBE_WUC_PME_STATUS	0x00000004 /* PME Status */
+#define IXGBE_WUC_WKEN		0x00000010 /* Enable PE_WAKE_N pin assertion  */
+
+/* Wake Up Filter Control */
+#define IXGBE_WUFC_LNKC	0x00000001 /* Link Status Change Wakeup Enable */
+#define IXGBE_WUFC_MAG	0x00000002 /* Magic Packet Wakeup Enable */
+#define IXGBE_WUFC_EX	0x00000004 /* Directed Exact Wakeup Enable */
+#define IXGBE_WUFC_MC	0x00000008 /* Directed Multicast Wakeup Enable */
+#define IXGBE_WUFC_BC	0x00000010 /* Broadcast Wakeup Enable */
+#define IXGBE_WUFC_ARP	0x00000020 /* ARP Request Packet Wakeup Enable */
+#define IXGBE_WUFC_IPV4	0x00000040 /* Directed IPv4 Packet Wakeup Enable */
+#define IXGBE_WUFC_IPV6	0x00000080 /* Directed IPv6 Packet Wakeup Enable */
+#define IXGBE_WUFC_MNG	0x00000100 /* Directed Mgmt Packet Wakeup Enable */
+
+#define IXGBE_WUFC_IGNORE_TCO	0x00008000 /* Ignore WakeOn TCO packets */
+#define IXGBE_WUFC_FLX0	0x00010000 /* Flexible Filter 0 Enable */
+#define IXGBE_WUFC_FLX1	0x00020000 /* Flexible Filter 1 Enable */
+#define IXGBE_WUFC_FLX2	0x00040000 /* Flexible Filter 2 Enable */
+#define IXGBE_WUFC_FLX3	0x00080000 /* Flexible Filter 3 Enable */
+#define IXGBE_WUFC_FLX4	0x00100000 /* Flexible Filter 4 Enable */
+#define IXGBE_WUFC_FLX5	0x00200000 /* Flexible Filter 5 Enable */
+#define IXGBE_WUFC_FLX_FILTERS		0x000F0000 /* Mask for 4 flex filters */
+#define IXGBE_WUFC_FLX_FILTERS_6	0x003F0000 /* Mask for 6 flex filters */
+#define IXGBE_WUFC_FLX_FILTERS_8	0x00FF0000 /* Mask for 8 flex filters */
+#define IXGBE_WUFC_FW_RST_WK	0x80000000 /* Ena wake on FW reset assertion */
+/* Mask for Ext. flex filters */
+#define IXGBE_WUFC_EXT_FLX_FILTERS	0x00300000
+#define IXGBE_WUFC_ALL_FILTERS		0x000F00FF /* Mask all 4 flex filters */
+#define IXGBE_WUFC_ALL_FILTERS_6	0x003F00FF /* Mask all 6 flex filters */
+#define IXGBE_WUFC_ALL_FILTERS_8	0x00FF00FF /* Mask all 8 flex filters */
+#define IXGBE_WUFC_FLX_OFFSET	16 /* Offset to the Flexible Filters bits */
+
+/* Wake Up Status */
+#define IXGBE_WUS_LNKC		IXGBE_WUFC_LNKC
+#define IXGBE_WUS_MAG		IXGBE_WUFC_MAG
+#define IXGBE_WUS_EX		IXGBE_WUFC_EX
+#define IXGBE_WUS_MC		IXGBE_WUFC_MC
+#define IXGBE_WUS_BC		IXGBE_WUFC_BC
+#define IXGBE_WUS_ARP		IXGBE_WUFC_ARP
+#define IXGBE_WUS_IPV4		IXGBE_WUFC_IPV4
+#define IXGBE_WUS_IPV6		IXGBE_WUFC_IPV6
+#define IXGBE_WUS_MNG		IXGBE_WUFC_MNG
+#define IXGBE_WUS_FLX0		IXGBE_WUFC_FLX0
+#define IXGBE_WUS_FLX1		IXGBE_WUFC_FLX1
+#define IXGBE_WUS_FLX2		IXGBE_WUFC_FLX2
+#define IXGBE_WUS_FLX3		IXGBE_WUFC_FLX3
+#define IXGBE_WUS_FLX4		IXGBE_WUFC_FLX4
+#define IXGBE_WUS_FLX5		IXGBE_WUFC_FLX5
+#define IXGBE_WUS_FLX_FILTERS	IXGBE_WUFC_FLX_FILTERS
+#define IXGBE_WUS_FW_RST_WK	IXGBE_WUFC_FW_RST_WK
+/* Proxy Status */
+#define IXGBE_PROXYS_EX		0x00000004 /* Exact packet received */
+#define IXGBE_PROXYS_ARP_DIR	0x00000020 /* ARP w/filter match received */
+#define IXGBE_PROXYS_NS		0x00000200 /* IPV6 NS received */
+#define IXGBE_PROXYS_NS_DIR	0x00000400 /* IPV6 NS w/DA match received */
+#define IXGBE_PROXYS_ARP	0x00000800 /* ARP request packet received */
+#define IXGBE_PROXYS_MLD	0x00001000 /* IPv6 MLD packet received */
+
+/* Proxying Filter Control */
+#define IXGBE_PROXYFC_ENABLE	0x00000001 /* Port Proxying Enable */
+#define IXGBE_PROXYFC_EX	0x00000004 /* Directed Exact Proxy Enable */
+#define IXGBE_PROXYFC_ARP_DIR	0x00000020 /* Directed ARP Proxy Enable */
+#define IXGBE_PROXYFC_NS	0x00000200 /* IPv6 Neighbor Solicitation */
+#define IXGBE_PROXYFC_ARP	0x00000800 /* ARP Request Proxy Enable */
+#define IXGBE_PROXYFC_MLD	0x00000800 /* IPv6 MLD Proxy Enable */
+#define IXGBE_PROXYFC_NO_TCO	0x00008000 /* Ignore TCO packets */
+
+#define IXGBE_WUPL_LENGTH_MASK	0xFFFF
+
+/* DCB registers */
+#define IXGBE_DCB_MAX_TRAFFIC_CLASS	8
+#define IXGBE_RMCS		0x03D00
+#define IXGBE_DPMCS		0x07F40
+#define IXGBE_PDPMCS		0x0CD00
+#define IXGBE_RUPPBMR		0x050A0
+#define IXGBE_RT2CR(_i)		(0x03C20 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_RT2SR(_i)		(0x03C40 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_TDTQ2TCCR(_i)	(0x0602C + ((_i) * 0x40)) /* 8 of these (0-7) */
+#define IXGBE_TDTQ2TCSR(_i)	(0x0622C + ((_i) * 0x40)) /* 8 of these (0-7) */
+#define IXGBE_TDPT2TCCR(_i)	(0x0CD20 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_TDPT2TCSR(_i)	(0x0CD40 + ((_i) * 4)) /* 8 of these (0-7) */
+
+/* Power Management */
+/* DMA Coalescing configuration */
+struct ixgbe_dmac_config {
+	u16	watchdog_timer; /* usec units */
+	bool	fcoe_en;
+	u32	link_speed;
+	u8	fcoe_tc;
+	u8	num_tcs;
+};
+
+/*
+ * DMA Coalescing threshold Rx PB TC[n] value in Kilobyte by link speed.
+ * DMACRXT = 10Gbps = 10,000 bits / usec = 1250 bytes / usec 70 * 1250 ==
+ * 87500 bytes [85KB]
+ */
+#define IXGBE_DMACRXT_10G		0x55
+#define IXGBE_DMACRXT_1G		0x09
+#define IXGBE_DMACRXT_100M		0x01
+
+/* DMA Coalescing registers */
+#define IXGBE_DMCMNGTH			0x15F20 /* Management Threshold */
+#define IXGBE_DMACR			0x02400 /* Control register */
+#define IXGBE_DMCTH(_i)			(0x03300 + ((_i) * 4)) /* 8 of these */
+#define IXGBE_DMCTLX			0x02404 /* Time to Lx request */
+/* DMA Coalescing register fields */
+#define IXGBE_DMCMNGTH_DMCMNGTH_MASK	0x000FFFF0 /* Mng Threshold mask */
+#define IXGBE_DMCMNGTH_DMCMNGTH_SHIFT	4 /* Management Threshold shift */
+#define IXGBE_DMACR_DMACWT_MASK		0x0000FFFF /* Watchdog Timer mask */
+#define IXGBE_DMACR_HIGH_PRI_TC_MASK	0x00FF0000
+#define IXGBE_DMACR_HIGH_PRI_TC_SHIFT	16
+#define IXGBE_DMACR_EN_MNG_IND		0x10000000 /* Enable Mng Indications */
+#define IXGBE_DMACR_LX_COAL_IND		0x40000000 /* Lx Coalescing indicate */
+#define IXGBE_DMACR_DMAC_EN		0x80000000 /* DMA Coalescing Enable */
+#define IXGBE_DMCTH_DMACRXT_MASK	0x000001FF /* Receive Threshold mask */
+#define IXGBE_DMCTLX_TTLX_MASK		0x00000FFF /* Time to Lx request mask */
+
+/* EEE registers */
+#define IXGBE_EEER			0x043A0 /* EEE register */
+#define IXGBE_EEE_STAT			0x04398 /* EEE Status */
+#define IXGBE_EEE_SU			0x04380 /* EEE Set up */
+#define IXGBE_EEE_SU_TEEE_DLY_SHIFT	26
+#define IXGBE_TLPIC			0x041F4 /* EEE Tx LPI count */
+#define IXGBE_RLPIC			0x041F8 /* EEE Rx LPI count */
+
+/* EEE register fields */
+#define IXGBE_EEER_TX_LPI_EN		0x00010000 /* Enable EEE LPI TX path */
+#define IXGBE_EEER_RX_LPI_EN		0x00020000 /* Enable EEE LPI RX path */
+#define IXGBE_EEE_STAT_NEG		0x20000000 /* EEE support neg on link */
+#define IXGBE_EEE_RX_LPI_STATUS		0x40000000 /* RX Link in LPI status */
+#define IXGBE_EEE_TX_LPI_STATUS		0x80000000 /* TX Link in LPI status */
+
+
+
+/* Security Control Registers */
+#define IXGBE_SECTXCTRL		0x08800
+#define IXGBE_SECTXSTAT		0x08804
+#define IXGBE_SECTXBUFFAF	0x08808
+#define IXGBE_SECTXMINIFG	0x08810
+#define IXGBE_SECRXCTRL		0x08D00
+#define IXGBE_SECRXSTAT		0x08D04
+
+/* Security Bit Fields and Masks */
+#define IXGBE_SECTXCTRL_SECTX_DIS	0x00000001
+#define IXGBE_SECTXCTRL_TX_DIS		0x00000002
+#define IXGBE_SECTXCTRL_STORE_FORWARD	0x00000004
+
+#define IXGBE_SECTXSTAT_SECTX_RDY	0x00000001
+#define IXGBE_SECTXSTAT_ECC_TXERR	0x00000002
+
+#define IXGBE_SECRXCTRL_SECRX_DIS	0x00000001
+#define IXGBE_SECRXCTRL_RX_DIS		0x00000002
+
+#define IXGBE_SECRXSTAT_SECRX_RDY	0x00000001
+#define IXGBE_SECRXSTAT_ECC_RXERR	0x00000002
+
+/* LinkSec (MacSec) Registers */
+#define IXGBE_LSECTXCAP		0x08A00
+#define IXGBE_LSECRXCAP		0x08F00
+#define IXGBE_LSECTXCTRL	0x08A04
+#define IXGBE_LSECTXSCL		0x08A08 /* SCI Low */
+#define IXGBE_LSECTXSCH		0x08A0C /* SCI High */
+#define IXGBE_LSECTXSA		0x08A10
+#define IXGBE_LSECTXPN0		0x08A14
+#define IXGBE_LSECTXPN1		0x08A18
+#define IXGBE_LSECTXKEY0(_n)	(0x08A1C + (4 * (_n))) /* 4 of these (0-3) */
+#define IXGBE_LSECTXKEY1(_n)	(0x08A2C + (4 * (_n))) /* 4 of these (0-3) */
+#define IXGBE_LSECRXCTRL	0x08F04
+#define IXGBE_LSECRXSCL		0x08F08
+#define IXGBE_LSECRXSCH		0x08F0C
+#define IXGBE_LSECRXSA(_i)	(0x08F10 + (4 * (_i))) /* 2 of these (0-1) */
+#define IXGBE_LSECRXPN(_i)	(0x08F18 + (4 * (_i))) /* 2 of these (0-1) */
+#define IXGBE_LSECRXKEY(_n, _m)	(0x08F20 + ((0x10 * (_n)) + (4 * (_m))))
+#define IXGBE_LSECTXUT		0x08A3C /* OutPktsUntagged */
+#define IXGBE_LSECTXPKTE	0x08A40 /* OutPktsEncrypted */
+#define IXGBE_LSECTXPKTP	0x08A44 /* OutPktsProtected */
+#define IXGBE_LSECTXOCTE	0x08A48 /* OutOctetsEncrypted */
+#define IXGBE_LSECTXOCTP	0x08A4C /* OutOctetsProtected */
+#define IXGBE_LSECRXUT		0x08F40 /* InPktsUntagged/InPktsNoTag */
+#define IXGBE_LSECRXOCTD	0x08F44 /* InOctetsDecrypted */
+#define IXGBE_LSECRXOCTV	0x08F48 /* InOctetsValidated */
+#define IXGBE_LSECRXBAD		0x08F4C /* InPktsBadTag */
+#define IXGBE_LSECRXNOSCI	0x08F50 /* InPktsNoSci */
+#define IXGBE_LSECRXUNSCI	0x08F54 /* InPktsUnknownSci */
+#define IXGBE_LSECRXUNCH	0x08F58 /* InPktsUnchecked */
+#define IXGBE_LSECRXDELAY	0x08F5C /* InPktsDelayed */
+#define IXGBE_LSECRXLATE	0x08F60 /* InPktsLate */
+#define IXGBE_LSECRXOK(_n)	(0x08F64 + (0x04 * (_n))) /* InPktsOk */
+#define IXGBE_LSECRXINV(_n)	(0x08F6C + (0x04 * (_n))) /* InPktsInvalid */
+#define IXGBE_LSECRXNV(_n)	(0x08F74 + (0x04 * (_n))) /* InPktsNotValid */
+#define IXGBE_LSECRXUNSA	0x08F7C /* InPktsUnusedSa */
+#define IXGBE_LSECRXNUSA	0x08F80 /* InPktsNotUsingSa */
+
+/* LinkSec (MacSec) Bit Fields and Masks */
+#define IXGBE_LSECTXCAP_SUM_MASK	0x00FF0000
+#define IXGBE_LSECTXCAP_SUM_SHIFT	16
+#define IXGBE_LSECRXCAP_SUM_MASK	0x00FF0000
+#define IXGBE_LSECRXCAP_SUM_SHIFT	16
+
+#define IXGBE_LSECTXCTRL_EN_MASK	0x00000003
+#define IXGBE_LSECTXCTRL_DISABLE	0x0
+#define IXGBE_LSECTXCTRL_AUTH		0x1
+#define IXGBE_LSECTXCTRL_AUTH_ENCRYPT	0x2
+#define IXGBE_LSECTXCTRL_AISCI		0x00000020
+#define IXGBE_LSECTXCTRL_PNTHRSH_MASK	0xFFFFFF00
+#define IXGBE_LSECTXCTRL_RSV_MASK	0x000000D8
+
+#define IXGBE_LSECRXCTRL_EN_MASK	0x0000000C
+#define IXGBE_LSECRXCTRL_EN_SHIFT	2
+#define IXGBE_LSECRXCTRL_DISABLE	0x0
+#define IXGBE_LSECRXCTRL_CHECK		0x1
+#define IXGBE_LSECRXCTRL_STRICT		0x2
+#define IXGBE_LSECRXCTRL_DROP		0x3
+#define IXGBE_LSECRXCTRL_PLSH		0x00000040
+#define IXGBE_LSECRXCTRL_RP		0x00000080
+#define IXGBE_LSECRXCTRL_RSV_MASK	0xFFFFFF33
+
+/* IpSec Registers */
+#define IXGBE_IPSTXIDX		0x08900
+#define IXGBE_IPSTXSALT		0x08904
+#define IXGBE_IPSTXKEY(_i)	(0x08908 + (4 * (_i))) /* 4 of these (0-3) */
+#define IXGBE_IPSRXIDX		0x08E00
+#define IXGBE_IPSRXIPADDR(_i)	(0x08E04 + (4 * (_i))) /* 4 of these (0-3) */
+#define IXGBE_IPSRXSPI		0x08E14
+#define IXGBE_IPSRXIPIDX	0x08E18
+#define IXGBE_IPSRXKEY(_i)	(0x08E1C + (4 * (_i))) /* 4 of these (0-3) */
+#define IXGBE_IPSRXSALT		0x08E2C
+#define IXGBE_IPSRXMOD		0x08E30
+
+#define IXGBE_SECTXCTRL_STORE_FORWARD_ENABLE	0x4
+
+/* DCB registers */
+#define IXGBE_RTRPCS		0x02430
+#define IXGBE_RTTDCS		0x04900
+#define IXGBE_RTTDCS_ARBDIS	0x00000040 /* DCB arbiter disable */
+#define IXGBE_RTTPCS		0x0CD00
+#define IXGBE_RTRUP2TC		0x03020
+#define IXGBE_RTTUP2TC		0x0C800
+#define IXGBE_RTRPT4C(_i)	(0x02140 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_TXLLQ(_i)		(0x082E0 + ((_i) * 4)) /* 4 of these (0-3) */
+#define IXGBE_RTRPT4S(_i)	(0x02160 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_RTTDT2C(_i)	(0x04910 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_RTTDT2S(_i)	(0x04930 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_RTTPT2C(_i)	(0x0CD20 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_RTTPT2S(_i)	(0x0CD40 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_RTTDQSEL		0x04904
+#define IXGBE_RTTDT1C		0x04908
+#define IXGBE_RTTDT1S		0x0490C
+#define IXGBE_RTTDTECC		0x04990
+#define IXGBE_RTTDTECC_NO_BCN	0x00000100
+
+#define IXGBE_RTTBCNRC			0x04984
+#define IXGBE_RTTBCNRC_RS_ENA		0x80000000
+#define IXGBE_RTTBCNRC_RF_DEC_MASK	0x00003FFF
+#define IXGBE_RTTBCNRC_RF_INT_SHIFT	14
+#define IXGBE_RTTBCNRC_RF_INT_MASK \
+	(IXGBE_RTTBCNRC_RF_DEC_MASK << IXGBE_RTTBCNRC_RF_INT_SHIFT)
+#define IXGBE_RTTBCNRM	0x04980
+
+/* BCN (for DCB) Registers */
+#define IXGBE_RTTBCNRS	0x04988
+#define IXGBE_RTTBCNCR	0x08B00
+#define IXGBE_RTTBCNACH	0x08B04
+#define IXGBE_RTTBCNACL	0x08B08
+#define IXGBE_RTTBCNTG	0x04A90
+#define IXGBE_RTTBCNIDX	0x08B0C
+#define IXGBE_RTTBCNCP	0x08B10
+#define IXGBE_RTFRTIMER	0x08B14
+#define IXGBE_RTTBCNRTT	0x05150
+#define IXGBE_RTTBCNRD	0x0498C
+
+
+/* FCoE DMA Context Registers */
+/* FCoE Direct DMA Context */
+#define IXGBE_FCDDC(_i, _j)	(0x20000 + ((_i) * 0x4) + ((_j) * 0x10))
+#define IXGBE_FCPTRL		0x02410 /* FC User Desc. PTR Low */
+#define IXGBE_FCPTRH		0x02414 /* FC USer Desc. PTR High */
+#define IXGBE_FCBUFF		0x02418 /* FC Buffer Control */
+#define IXGBE_FCDMARW		0x02420 /* FC Receive DMA RW */
+#define IXGBE_FCBUFF_VALID	(1 << 0)   /* DMA Context Valid */
+#define IXGBE_FCBUFF_BUFFSIZE	(3 << 3)   /* User Buffer Size */
+#define IXGBE_FCBUFF_WRCONTX	(1 << 7)   /* 0: Initiator, 1: Target */
+#define IXGBE_FCBUFF_BUFFCNT	0x0000ff00 /* Number of User Buffers */
+#define IXGBE_FCBUFF_OFFSET	0xffff0000 /* User Buffer Offset */
+#define IXGBE_FCBUFF_BUFFSIZE_SHIFT	3
+#define IXGBE_FCBUFF_BUFFCNT_SHIFT	8
+#define IXGBE_FCBUFF_OFFSET_SHIFT	16
+#define IXGBE_FCDMARW_WE		(1 << 14)   /* Write enable */
+#define IXGBE_FCDMARW_RE		(1 << 15)   /* Read enable */
+#define IXGBE_FCDMARW_FCOESEL		0x000001ff  /* FC X_ID: 11 bits */
+#define IXGBE_FCDMARW_LASTSIZE		0xffff0000  /* Last User Buffer Size */
+#define IXGBE_FCDMARW_LASTSIZE_SHIFT	16
+/* FCoE SOF/EOF */
+#define IXGBE_TEOFF		0x04A94 /* Tx FC EOF */
+#define IXGBE_TSOFF		0x04A98 /* Tx FC SOF */
+#define IXGBE_REOFF		0x05158 /* Rx FC EOF */
+#define IXGBE_RSOFF		0x051F8 /* Rx FC SOF */
+/* FCoE Filter Context Registers */
+#define IXGBE_FCD_ID		0x05114 /* FCoE D_ID */
+#define IXGBE_FCSMAC		0x0510C /* FCoE Source MAC */
+#define IXGBE_FCFLTRW_SMAC_HIGH_SHIFT	16
+/* FCoE Direct Filter Context */
+#define IXGBE_FCDFC(_i, _j)	(0x28000 + ((_i) * 0x4) + ((_j) * 0x10))
+#define IXGBE_FCDFCD(_i)	(0x30000 + ((_i) * 0x4))
+#define IXGBE_FCFLT		0x05108 /* FC FLT Context */
+#define IXGBE_FCFLTRW		0x05110 /* FC Filter RW Control */
+#define IXGBE_FCPARAM		0x051d8 /* FC Offset Parameter */
+#define IXGBE_FCFLT_VALID	(1 << 0)   /* Filter Context Valid */
+#define IXGBE_FCFLT_FIRST	(1 << 1)   /* Filter First */
+#define IXGBE_FCFLT_SEQID	0x00ff0000 /* Sequence ID */
+#define IXGBE_FCFLT_SEQCNT	0xff000000 /* Sequence Count */
+#define IXGBE_FCFLTRW_RVALDT	(1 << 13)  /* Fast Re-Validation */
+#define IXGBE_FCFLTRW_WE	(1 << 14)  /* Write Enable */
+#define IXGBE_FCFLTRW_RE	(1 << 15)  /* Read Enable */
+/* FCoE Receive Control */
+#define IXGBE_FCRXCTRL		0x05100 /* FC Receive Control */
+#define IXGBE_FCRXCTRL_FCOELLI	(1 << 0)   /* Low latency interrupt */
+#define IXGBE_FCRXCTRL_SAVBAD	(1 << 1)   /* Save Bad Frames */
+#define IXGBE_FCRXCTRL_FRSTRDH	(1 << 2)   /* EN 1st Read Header */
+#define IXGBE_FCRXCTRL_LASTSEQH	(1 << 3)   /* EN Last Header in Seq */
+#define IXGBE_FCRXCTRL_ALLH	(1 << 4)   /* EN All Headers */
+#define IXGBE_FCRXCTRL_FRSTSEQH	(1 << 5)   /* EN 1st Seq. Header */
+#define IXGBE_FCRXCTRL_ICRC	(1 << 6)   /* Ignore Bad FC CRC */
+#define IXGBE_FCRXCTRL_FCCRCBO	(1 << 7)   /* FC CRC Byte Ordering */
+#define IXGBE_FCRXCTRL_FCOEVER	0x00000f00 /* FCoE Version: 4 bits */
+#define IXGBE_FCRXCTRL_FCOEVER_SHIFT	8
+/* FCoE Redirection */
+#define IXGBE_FCRECTL		0x0ED00 /* FC Redirection Control */
+#define IXGBE_FCRETA0		0x0ED10 /* FC Redirection Table 0 */
+#define IXGBE_FCRETA(_i)	(IXGBE_FCRETA0 + ((_i) * 4)) /* FCoE Redir */
+#define IXGBE_FCRECTL_ENA	0x1 /* FCoE Redir Table Enable */
+#define IXGBE_FCRETASEL_ENA	0x2 /* FCoE FCRETASEL bit */
+#define IXGBE_FCRETA_SIZE	8 /* Max entries in FCRETA */
+#define IXGBE_FCRETA_ENTRY_MASK	0x0000007f /* 7 bits for the queue index */
+#define IXGBE_FCRETA_SIZE_X550	32 /* Max entries in FCRETA */
+/* Higher 7 bits for the queue index */
+#define IXGBE_FCRETA_ENTRY_HIGH_MASK	0x007F0000
+#define IXGBE_FCRETA_ENTRY_HIGH_SHIFT	16
+
+/* Stats registers */
+#define IXGBE_CRCERRS	0x04000
+#define IXGBE_ILLERRC	0x04004
+#define IXGBE_ERRBC	0x04008
+#define IXGBE_MSPDC	0x04010
+#define IXGBE_MPC(_i)	(0x03FA0 + ((_i) * 4)) /* 8 of these 3FA0-3FBC*/
+#define IXGBE_MLFC	0x04034
+#define IXGBE_MRFC	0x04038
+#define IXGBE_RLEC	0x04040
+#define IXGBE_LXONTXC	0x03F60
+#define IXGBE_LXONRXC	0x0CF60
+#define IXGBE_LXOFFTXC	0x03F68
+#define IXGBE_LXOFFRXC	0x0CF68
+#define IXGBE_LXONRXCNT		0x041A4
+#define IXGBE_LXOFFRXCNT	0x041A8
+#define IXGBE_PXONRXCNT(_i)	(0x04140 + ((_i) * 4)) /* 8 of these */
+#define IXGBE_PXOFFRXCNT(_i)	(0x04160 + ((_i) * 4)) /* 8 of these */
+#define IXGBE_PXON2OFFCNT(_i)	(0x03240 + ((_i) * 4)) /* 8 of these */
+#define IXGBE_PXONTXC(_i)	(0x03F00 + ((_i) * 4)) /* 8 of these 3F00-3F1C*/
+#define IXGBE_PXONRXC(_i)	(0x0CF00 + ((_i) * 4)) /* 8 of these CF00-CF1C*/
+#define IXGBE_PXOFFTXC(_i)	(0x03F20 + ((_i) * 4)) /* 8 of these 3F20-3F3C*/
+#define IXGBE_PXOFFRXC(_i)	(0x0CF20 + ((_i) * 4)) /* 8 of these CF20-CF3C*/
+#define IXGBE_PRC64		0x0405C
+#define IXGBE_PRC127		0x04060
+#define IXGBE_PRC255		0x04064
+#define IXGBE_PRC511		0x04068
+#define IXGBE_PRC1023		0x0406C
+#define IXGBE_PRC1522		0x04070
+#define IXGBE_GPRC		0x04074
+#define IXGBE_BPRC		0x04078
+#define IXGBE_MPRC		0x0407C
+#define IXGBE_GPTC		0x04080
+#define IXGBE_GORCL		0x04088
+#define IXGBE_GORCH		0x0408C
+#define IXGBE_GOTCL		0x04090
+#define IXGBE_GOTCH		0x04094
+#define IXGBE_RNBC(_i)		(0x03FC0 + ((_i) * 4)) /* 8 of these 3FC0-3FDC*/
+#define IXGBE_RUC		0x040A4
+#define IXGBE_RFC		0x040A8
+#define IXGBE_ROC		0x040AC
+#define IXGBE_RJC		0x040B0
+#define IXGBE_MNGPRC		0x040B4
+#define IXGBE_MNGPDC		0x040B8
+#define IXGBE_MNGPTC		0x0CF90
+#define IXGBE_TORL		0x040C0
+#define IXGBE_TORH		0x040C4
+#define IXGBE_TPR		0x040D0
+#define IXGBE_TPT		0x040D4
+#define IXGBE_PTC64		0x040D8
+#define IXGBE_PTC127		0x040DC
+#define IXGBE_PTC255		0x040E0
+#define IXGBE_PTC511		0x040E4
+#define IXGBE_PTC1023		0x040E8
+#define IXGBE_PTC1522		0x040EC
+#define IXGBE_MPTC		0x040F0
+#define IXGBE_BPTC		0x040F4
+#define IXGBE_XEC		0x04120
+#define IXGBE_SSVPC		0x08780
+
+#define IXGBE_RQSMR(_i)	(0x02300 + ((_i) * 4))
+#define IXGBE_TQSMR(_i)	(((_i) <= 7) ? (0x07300 + ((_i) * 4)) : \
+			 (0x08600 + ((_i) * 4)))
+#define IXGBE_TQSM(_i)	(0x08600 + ((_i) * 4))
+
+#define IXGBE_QPRC(_i)	(0x01030 + ((_i) * 0x40)) /* 16 of these */
+#define IXGBE_QPTC(_i)	(0x06030 + ((_i) * 0x40)) /* 16 of these */
+#define IXGBE_QBRC(_i)	(0x01034 + ((_i) * 0x40)) /* 16 of these */
+#define IXGBE_QBTC(_i)	(0x06034 + ((_i) * 0x40)) /* 16 of these */
+#define IXGBE_QBRC_L(_i)	(0x01034 + ((_i) * 0x40)) /* 16 of these */
+#define IXGBE_QBRC_H(_i)	(0x01038 + ((_i) * 0x40)) /* 16 of these */
+#define IXGBE_QPRDC(_i)		(0x01430 + ((_i) * 0x40)) /* 16 of these */
+#define IXGBE_QBTC_L(_i)	(0x08700 + ((_i) * 0x8)) /* 16 of these */
+#define IXGBE_QBTC_H(_i)	(0x08704 + ((_i) * 0x8)) /* 16 of these */
+#define IXGBE_FCCRC		0x05118 /* Num of Good Eth CRC w/ Bad FC CRC */
+#define IXGBE_FCOERPDC		0x0241C /* FCoE Rx Packets Dropped Count */
+#define IXGBE_FCLAST		0x02424 /* FCoE Last Error Count */
+#define IXGBE_FCOEPRC		0x02428 /* Number of FCoE Packets Received */
+#define IXGBE_FCOEDWRC		0x0242C /* Number of FCoE DWords Received */
+#define IXGBE_FCOEPTC		0x08784 /* Number of FCoE Packets Transmitted */
+#define IXGBE_FCOEDWTC		0x08788 /* Number of FCoE DWords Transmitted */
+#define IXGBE_FCCRC_CNT_MASK	0x0000FFFF /* CRC_CNT: bit 0 - 15 */
+#define IXGBE_FCLAST_CNT_MASK	0x0000FFFF /* Last_CNT: bit 0 - 15 */
+#define IXGBE_O2BGPTC		0x041C4
+#define IXGBE_O2BSPC		0x087B0
+#define IXGBE_B2OSPC		0x041C0
+#define IXGBE_B2OGPRC		0x02F90
+#define IXGBE_BUPRC		0x04180
+#define IXGBE_BMPRC		0x04184
+#define IXGBE_BBPRC		0x04188
+#define IXGBE_BUPTC		0x0418C
+#define IXGBE_BMPTC		0x04190
+#define IXGBE_BBPTC		0x04194
+#define IXGBE_BCRCERRS		0x04198
+#define IXGBE_BXONRXC		0x0419C
+#define IXGBE_BXOFFRXC		0x041E0
+#define IXGBE_BXONTXC		0x041E4
+#define IXGBE_BXOFFTXC		0x041E8
+
+/* Management */
+#define IXGBE_MAVTV(_i)		(0x05010 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_MFUTP(_i)		(0x05030 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_MANC		0x05820
+#define IXGBE_MFVAL		0x05824
+#define IXGBE_MANC2H		0x05860
+#define IXGBE_MDEF(_i)		(0x05890 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_MIPAF		0x058B0
+#define IXGBE_MMAL(_i)		(0x05910 + ((_i) * 8)) /* 4 of these (0-3) */
+#define IXGBE_MMAH(_i)		(0x05914 + ((_i) * 8)) /* 4 of these (0-3) */
+#define IXGBE_FTFT		0x09400 /* 0x9400-0x97FC */
+#define IXGBE_METF(_i)		(0x05190 + ((_i) * 4)) /* 4 of these (0-3) */
+#define IXGBE_MDEF_EXT(_i)	(0x05160 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_LSWFW		0x15014
+#define IXGBE_BMCIP(_i)		(0x05050 + ((_i) * 4)) /* 0x5050-0x505C */
+#define IXGBE_BMCIPVAL		0x05060
+#define IXGBE_BMCIP_IPADDR_TYPE	0x00000001
+#define IXGBE_BMCIP_IPADDR_VALID	0x00000002
+
+/* Management Bit Fields and Masks */
+#define IXGBE_MANC_MPROXYE	0x40000000 /* Management Proxy Enable */
+#define IXGBE_MANC_RCV_TCO_EN	0x00020000 /* Rcv TCO packet enable */
+#define IXGBE_MANC_EN_BMC2OS	0x10000000 /* Ena BMC2OS and OS2BMC traffic */
+#define IXGBE_MANC_EN_BMC2OS_SHIFT	28
+
+/* Firmware Semaphore Register */
+#define IXGBE_FWSM_MODE_MASK	0xE
+#define IXGBE_FWSM_TS_ENABLED	0x1
+#define IXGBE_FWSM_FW_MODE_PT	0x4
+
+/* ARC Subsystem registers */
+#define IXGBE_HICR		0x15F00
+#define IXGBE_FWSTS		0x15F0C
+#define IXGBE_HSMC0R		0x15F04
+#define IXGBE_HSMC1R		0x15F08
+#define IXGBE_SWSR		0x15F10
+#define IXGBE_HFDR		0x15FE8
+#define IXGBE_FLEX_MNG		0x15800 /* 0x15800 - 0x15EFC */
+
+#define IXGBE_HICR_EN		0x01  /* Enable bit - RO */
+/* Driver sets this bit when done to put command in RAM */
+#define IXGBE_HICR_C		0x02
+#define IXGBE_HICR_SV		0x04  /* Status Validity */
+#define IXGBE_HICR_FW_RESET_ENABLE	0x40
+#define IXGBE_HICR_FW_RESET	0x80
+
+/* PCI-E registers */
+#define IXGBE_GCR		0x11000
+#define IXGBE_GTV		0x11004
+#define IXGBE_FUNCTAG		0x11008
+#define IXGBE_GLT		0x1100C
+#define IXGBE_PCIEPIPEADR	0x11004
+#define IXGBE_PCIEPIPEDAT	0x11008
+#define IXGBE_GSCL_1		0x11010
+#define IXGBE_GSCL_2		0x11014
+#define IXGBE_GSCL_3		0x11018
+#define IXGBE_GSCL_4		0x1101C
+#define IXGBE_GSCN_0		0x11020
+#define IXGBE_GSCN_1		0x11024
+#define IXGBE_GSCN_2		0x11028
+#define IXGBE_GSCN_3		0x1102C
+#define IXGBE_FACTPS		0x10150
+#define IXGBE_FACTPS_X540	IXGBE_FACTPS
+#define IXGBE_FACTPS_X550	IXGBE_FACTPS
+#define IXGBE_FACTPS_X550EM_x	IXGBE_FACTPS
+#define IXGBE_FACTPS_X550EM_a	0x15FEC
+#define IXGBE_FACTPS_BY_MAC(_hw)	IXGBE_BY_MAC((_hw), FACTPS)
+
+#define IXGBE_PCIEANACTL	0x11040
+#define IXGBE_SWSM		0x10140
+#define IXGBE_SWSM_X540		IXGBE_SWSM
+#define IXGBE_SWSM_X550		IXGBE_SWSM
+#define IXGBE_SWSM_X550EM_x	IXGBE_SWSM
+#define IXGBE_SWSM_X550EM_a	0x15F70
+#define IXGBE_SWSM_BY_MAC(_hw)	IXGBE_BY_MAC((_hw), SWSM)
+
+#define IXGBE_FWSM		0x10148
+#define IXGBE_FWSM_X540		IXGBE_FWSM
+#define IXGBE_FWSM_X550		IXGBE_FWSM
+#define IXGBE_FWSM_X550EM_x	IXGBE_FWSM
+#define IXGBE_FWSM_X550EM_a	0x15F74
+#define IXGBE_FWSM_BY_MAC(_hw)	IXGBE_BY_MAC((_hw), FWSM)
+
+#define IXGBE_SWFW_SYNC		IXGBE_GSSR
+#define IXGBE_SWFW_SYNC_X540	IXGBE_SWFW_SYNC
+#define IXGBE_SWFW_SYNC_X550	IXGBE_SWFW_SYNC
+#define IXGBE_SWFW_SYNC_X550EM_x	IXGBE_SWFW_SYNC
+#define IXGBE_SWFW_SYNC_X550EM_a	0x15F78
+#define IXGBE_SWFW_SYNC_BY_MAC(_hw)	IXGBE_BY_MAC((_hw), SWFW_SYNC)
+
+#define IXGBE_GSSR		0x10160
+#define IXGBE_MREVID		0x11064
+#define IXGBE_DCA_ID		0x11070
+#define IXGBE_DCA_CTRL		0x11074
+
+/* PCI-E registers 82599-Specific */
+#define IXGBE_GCR_EXT		0x11050
+#define IXGBE_GSCL_5_82599	0x11030
+#define IXGBE_GSCL_6_82599	0x11034
+#define IXGBE_GSCL_7_82599	0x11038
+#define IXGBE_GSCL_8_82599	0x1103C
+#define IXGBE_PHYADR_82599	0x11040
+#define IXGBE_PHYDAT_82599	0x11044
+#define IXGBE_PHYCTL_82599	0x11048
+#define IXGBE_PBACLR_82599	0x11068
+#define IXGBE_CIAA		0x11088
+#define IXGBE_CIAD		0x1108C
+#define IXGBE_CIAA_82599	IXGBE_CIAA
+#define IXGBE_CIAD_82599	IXGBE_CIAD
+#define IXGBE_CIAA_X540		IXGBE_CIAA
+#define IXGBE_CIAD_X540		IXGBE_CIAD
+#define IXGBE_CIAA_X550		0x11508
+#define IXGBE_CIAD_X550		0x11510
+#define IXGBE_CIAA_X550EM_x	IXGBE_CIAA_X550
+#define IXGBE_CIAD_X550EM_x	IXGBE_CIAD_X550
+#define IXGBE_CIAA_X550EM_a	IXGBE_CIAA_X550
+#define IXGBE_CIAD_X550EM_a	IXGBE_CIAD_X550
+#define IXGBE_CIAA_BY_MAC(_hw)	IXGBE_BY_MAC((_hw), CIAA)
+#define IXGBE_CIAD_BY_MAC(_hw)	IXGBE_BY_MAC((_hw), CIAD)
+#define IXGBE_PICAUSE		0x110B0
+#define IXGBE_PIENA		0x110B8
+#define IXGBE_CDQ_MBR_82599	0x110B4
+#define IXGBE_PCIESPARE		0x110BC
+#define IXGBE_MISC_REG_82599	0x110F0
+#define IXGBE_ECC_CTRL_0_82599	0x11100
+#define IXGBE_ECC_CTRL_1_82599	0x11104
+#define IXGBE_ECC_STATUS_82599	0x110E0
+#define IXGBE_BAR_CTRL_82599	0x110F4
+
+/* PCI Express Control */
+#define IXGBE_GCR_CMPL_TMOUT_MASK	0x0000F000
+#define IXGBE_GCR_CMPL_TMOUT_10ms	0x00001000
+#define IXGBE_GCR_CMPL_TMOUT_RESEND	0x00010000
+#define IXGBE_GCR_CAP_VER2		0x00040000
+
+#define IXGBE_GCR_EXT_MSIX_EN		0x80000000
+#define IXGBE_GCR_EXT_BUFFERS_CLEAR	0x40000000
+#define IXGBE_GCR_EXT_VT_MODE_16	0x00000001
+#define IXGBE_GCR_EXT_VT_MODE_32	0x00000002
+#define IXGBE_GCR_EXT_VT_MODE_64	0x00000003
+#define IXGBE_GCR_EXT_SRIOV		(IXGBE_GCR_EXT_MSIX_EN | \
+					 IXGBE_GCR_EXT_VT_MODE_64)
+#define IXGBE_GCR_EXT_VT_MODE_MASK	0x00000003
+/* Time Sync Registers */
+#define IXGBE_TSYNCRXCTL	0x05188 /* Rx Time Sync Control register - RW */
+#define IXGBE_TSYNCTXCTL	0x08C00 /* Tx Time Sync Control register - RW */
+#define IXGBE_RXSTMPL	0x051E8 /* Rx timestamp Low - RO */
+#define IXGBE_RXSTMPH	0x051A4 /* Rx timestamp High - RO */
+#define IXGBE_RXSATRL	0x051A0 /* Rx timestamp attribute low - RO */
+#define IXGBE_RXSATRH	0x051A8 /* Rx timestamp attribute high - RO */
+#define IXGBE_RXMTRL	0x05120 /* RX message type register low - RW */
+#define IXGBE_TXSTMPL	0x08C04 /* Tx timestamp value Low - RO */
+#define IXGBE_TXSTMPH	0x08C08 /* Tx timestamp value High - RO */
+#define IXGBE_SYSTIML	0x08C0C /* System time register Low - RO */
+#define IXGBE_SYSTIMH	0x08C10 /* System time register High - RO */
+#define IXGBE_SYSTIMR	0x08C58 /* System time register Residue - RO */
+#define IXGBE_TIMINCA	0x08C14 /* Increment attributes register - RW */
+#define IXGBE_TIMADJL	0x08C18 /* Time Adjustment Offset register Low - RW */
+#define IXGBE_TIMADJH	0x08C1C /* Time Adjustment Offset register High - RW */
+#define IXGBE_TSAUXC	0x08C20 /* TimeSync Auxiliary Control register - RW */
+#define IXGBE_TRGTTIML0	0x08C24 /* Target Time Register 0 Low - RW */
+#define IXGBE_TRGTTIMH0	0x08C28 /* Target Time Register 0 High - RW */
+#define IXGBE_TRGTTIML1	0x08C2C /* Target Time Register 1 Low - RW */
+#define IXGBE_TRGTTIMH1	0x08C30 /* Target Time Register 1 High - RW */
+#define IXGBE_CLKTIML	0x08C34 /* Clock Out Time Register Low - RW */
+#define IXGBE_CLKTIMH	0x08C38 /* Clock Out Time Register High - RW */
+#define IXGBE_FREQOUT0	0x08C34 /* Frequency Out 0 Control register - RW */
+#define IXGBE_FREQOUT1	0x08C38 /* Frequency Out 1 Control register - RW */
+#define IXGBE_AUXSTMPL0	0x08C3C /* Auxiliary Time Stamp 0 register Low - RO */
+#define IXGBE_AUXSTMPH0	0x08C40 /* Auxiliary Time Stamp 0 register High - RO */
+#define IXGBE_AUXSTMPL1	0x08C44 /* Auxiliary Time Stamp 1 register Low - RO */
+#define IXGBE_AUXSTMPH1	0x08C48 /* Auxiliary Time Stamp 1 register High - RO */
+#define IXGBE_TSIM	0x08C68 /* TimeSync Interrupt Mask Register - RW */
+#define IXGBE_TSICR	0x08C60 /* TimeSync Interrupt Cause Register - WO */
+#define IXGBE_TSSDP	0x0003C /* TimeSync SDP Configuration Register - RW */
+
+/* Diagnostic Registers */
+#define IXGBE_RDSTATCTL		0x02C20
+#define IXGBE_RDSTAT(_i)	(0x02C00 + ((_i) * 4)) /* 0x02C00-0x02C1C */
+#define IXGBE_RDHMPN		0x02F08
+#define IXGBE_RIC_DW(_i)	(0x02F10 + ((_i) * 4))
+#define IXGBE_RDPROBE		0x02F20
+#define IXGBE_RDMAM		0x02F30
+#define IXGBE_RDMAD		0x02F34
+#define IXGBE_TDHMPN		0x07F08
+#define IXGBE_TDHMPN2		0x082FC
+#define IXGBE_TXDESCIC		0x082CC
+#define IXGBE_TIC_DW(_i)	(0x07F10 + ((_i) * 4))
+#define IXGBE_TIC_DW2(_i)	(0x082B0 + ((_i) * 4))
+#define IXGBE_TDPROBE		0x07F20
+#define IXGBE_TXBUFCTRL		0x0C600
+#define IXGBE_TXBUFDATA0	0x0C610
+#define IXGBE_TXBUFDATA1	0x0C614
+#define IXGBE_TXBUFDATA2	0x0C618
+#define IXGBE_TXBUFDATA3	0x0C61C
+#define IXGBE_RXBUFCTRL		0x03600
+#define IXGBE_RXBUFDATA0	0x03610
+#define IXGBE_RXBUFDATA1	0x03614
+#define IXGBE_RXBUFDATA2	0x03618
+#define IXGBE_RXBUFDATA3	0x0361C
+#define IXGBE_PCIE_DIAG(_i)	(0x11090 + ((_i) * 4)) /* 8 of these */
+#define IXGBE_RFVAL		0x050A4
+#define IXGBE_MDFTC1		0x042B8
+#define IXGBE_MDFTC2		0x042C0
+#define IXGBE_MDFTFIFO1		0x042C4
+#define IXGBE_MDFTFIFO2		0x042C8
+#define IXGBE_MDFTS		0x042CC
+#define IXGBE_RXDATAWRPTR(_i)	(0x03700 + ((_i) * 4)) /* 8 of these 3700-370C*/
+#define IXGBE_RXDESCWRPTR(_i)	(0x03710 + ((_i) * 4)) /* 8 of these 3710-371C*/
+#define IXGBE_RXDATARDPTR(_i)	(0x03720 + ((_i) * 4)) /* 8 of these 3720-372C*/
+#define IXGBE_RXDESCRDPTR(_i)	(0x03730 + ((_i) * 4)) /* 8 of these 3730-373C*/
+#define IXGBE_TXDATAWRPTR(_i)	(0x0C700 + ((_i) * 4)) /* 8 of these C700-C70C*/
+#define IXGBE_TXDESCWRPTR(_i)	(0x0C710 + ((_i) * 4)) /* 8 of these C710-C71C*/
+#define IXGBE_TXDATARDPTR(_i)	(0x0C720 + ((_i) * 4)) /* 8 of these C720-C72C*/
+#define IXGBE_TXDESCRDPTR(_i)	(0x0C730 + ((_i) * 4)) /* 8 of these C730-C73C*/
+#define IXGBE_PCIEECCCTL	0x1106C
+#define IXGBE_RXWRPTR(_i)	(0x03100 + ((_i) * 4)) /* 8 of these 3100-310C*/
+#define IXGBE_RXUSED(_i)	(0x03120 + ((_i) * 4)) /* 8 of these 3120-312C*/
+#define IXGBE_RXRDPTR(_i)	(0x03140 + ((_i) * 4)) /* 8 of these 3140-314C*/
+#define IXGBE_RXRDWRPTR(_i)	(0x03160 + ((_i) * 4)) /* 8 of these 3160-310C*/
+#define IXGBE_TXWRPTR(_i)	(0x0C100 + ((_i) * 4)) /* 8 of these C100-C10C*/
+#define IXGBE_TXUSED(_i)	(0x0C120 + ((_i) * 4)) /* 8 of these C120-C12C*/
+#define IXGBE_TXRDPTR(_i)	(0x0C140 + ((_i) * 4)) /* 8 of these C140-C14C*/
+#define IXGBE_TXRDWRPTR(_i)	(0x0C160 + ((_i) * 4)) /* 8 of these C160-C10C*/
+#define IXGBE_PCIEECCCTL0	0x11100
+#define IXGBE_PCIEECCCTL1	0x11104
+#define IXGBE_RXDBUECC		0x03F70
+#define IXGBE_TXDBUECC		0x0CF70
+#define IXGBE_RXDBUEST		0x03F74
+#define IXGBE_TXDBUEST		0x0CF74
+#define IXGBE_PBTXECC		0x0C300
+#define IXGBE_PBRXECC		0x03300
+#define IXGBE_GHECCR		0x110B0
+
+/* MAC Registers */
+#define IXGBE_PCS1GCFIG		0x04200
+#define IXGBE_PCS1GLCTL		0x04208
+#define IXGBE_PCS1GLSTA		0x0420C
+#define IXGBE_PCS1GDBG0		0x04210
+#define IXGBE_PCS1GDBG1		0x04214
+#define IXGBE_PCS1GANA		0x04218
+#define IXGBE_PCS1GANLP		0x0421C
+#define IXGBE_PCS1GANNP		0x04220
+#define IXGBE_PCS1GANLPNP	0x04224
+#define IXGBE_HLREG0		0x04240
+#define IXGBE_HLREG1		0x04244
+#define IXGBE_PAP		0x04248
+#define IXGBE_MACA		0x0424C
+#define IXGBE_APAE		0x04250
+#define IXGBE_ARD		0x04254
+#define IXGBE_AIS		0x04258
+#define IXGBE_MSCA		0x0425C
+#define IXGBE_MSRWD		0x04260
+#define IXGBE_MLADD		0x04264
+#define IXGBE_MHADD		0x04268
+#define IXGBE_MAXFRS		0x04268
+#define IXGBE_TREG		0x0426C
+#define IXGBE_PCSS1		0x04288
+#define IXGBE_PCSS2		0x0428C
+#define IXGBE_XPCSS		0x04290
+#define IXGBE_MFLCN		0x04294
+#define IXGBE_SERDESC		0x04298
+#define IXGBE_MAC_SGMII_BUSY	0x04298
+#define IXGBE_MACS		0x0429C
+#define IXGBE_AUTOC		0x042A0
+#define IXGBE_LINKS		0x042A4
+#define IXGBE_LINKS2		0x04324
+#define IXGBE_AUTOC2		0x042A8
+#define IXGBE_AUTOC3		0x042AC
+#define IXGBE_ANLP1		0x042B0
+#define IXGBE_ANLP2		0x042B4
+#define IXGBE_MACC		0x04330
+#define IXGBE_ATLASCTL		0x04800
+#define IXGBE_MMNGC		0x042D0
+#define IXGBE_ANLPNP1		0x042D4
+#define IXGBE_ANLPNP2		0x042D8
+#define IXGBE_KRPCSFC		0x042E0
+#define IXGBE_KRPCSS		0x042E4
+#define IXGBE_FECS1		0x042E8
+#define IXGBE_FECS2		0x042EC
+#define IXGBE_SMADARCTL		0x14F10
+#define IXGBE_MPVC		0x04318
+#define IXGBE_SGMIIC		0x04314
+
+/* Statistics Registers */
+#define IXGBE_RXNFGPC		0x041B0
+#define IXGBE_RXNFGBCL		0x041B4
+#define IXGBE_RXNFGBCH		0x041B8
+#define IXGBE_RXDGPC		0x02F50
+#define IXGBE_RXDGBCL		0x02F54
+#define IXGBE_RXDGBCH		0x02F58
+#define IXGBE_RXDDGPC		0x02F5C
+#define IXGBE_RXDDGBCL		0x02F60
+#define IXGBE_RXDDGBCH		0x02F64
+#define IXGBE_RXLPBKGPC		0x02F68
+#define IXGBE_RXLPBKGBCL	0x02F6C
+#define IXGBE_RXLPBKGBCH	0x02F70
+#define IXGBE_RXDLPBKGPC	0x02F74
+#define IXGBE_RXDLPBKGBCL	0x02F78
+#define IXGBE_RXDLPBKGBCH	0x02F7C
+#define IXGBE_TXDGPC		0x087A0
+#define IXGBE_TXDGBCL		0x087A4
+#define IXGBE_TXDGBCH		0x087A8
+
+#define IXGBE_RXDSTATCTRL	0x02F40
+
+/* Copper Pond 2 link timeout */
+#define IXGBE_VALIDATE_LINK_READY_TIMEOUT 50
+
+/* Omer CORECTL */
+#define IXGBE_CORECTL			0x014F00
+/* BARCTRL */
+#define IXGBE_BARCTRL			0x110F4
+#define IXGBE_BARCTRL_FLSIZE		0x0700
+#define IXGBE_BARCTRL_FLSIZE_SHIFT	8
+#define IXGBE_BARCTRL_CSRSIZE		0x2000
+
+/* RSCCTL Bit Masks */
+#define IXGBE_RSCCTL_RSCEN	0x01
+#define IXGBE_RSCCTL_MAXDESC_1	0x00
+#define IXGBE_RSCCTL_MAXDESC_4	0x04
+#define IXGBE_RSCCTL_MAXDESC_8	0x08
+#define IXGBE_RSCCTL_MAXDESC_16	0x0C
+#define IXGBE_RSCCTL_TS_DIS	0x02
+
+/* RSCDBU Bit Masks */
+#define IXGBE_RSCDBU_RSCSMALDIS_MASK	0x0000007F
+#define IXGBE_RSCDBU_RSCACKDIS		0x00000080
+
+/* RDRXCTL Bit Masks */
+#define IXGBE_RDRXCTL_RDMTS_1_2		0x00000000 /* Rx Desc Min THLD Size */
+#define IXGBE_RDRXCTL_CRCSTRIP		0x00000002 /* CRC Strip */
+#define IXGBE_RDRXCTL_PSP		0x00000004 /* Pad Small Packet */
+#define IXGBE_RDRXCTL_MVMEN		0x00000020
+#define IXGBE_RDRXCTL_RSC_PUSH_DIS	0x00000020
+#define IXGBE_RDRXCTL_DMAIDONE		0x00000008 /* DMA init cycle done */
+#define IXGBE_RDRXCTL_RSC_PUSH		0x00000080
+#define IXGBE_RDRXCTL_AGGDIS		0x00010000 /* Aggregation disable */
+#define IXGBE_RDRXCTL_RSCFRSTSIZE	0x003E0000 /* RSC First packet size */
+#define IXGBE_RDRXCTL_RSCLLIDIS		0x00800000 /* Disable RSC compl on LLI*/
+#define IXGBE_RDRXCTL_RSCACKC		0x02000000 /* must set 1 when RSC ena */
+#define IXGBE_RDRXCTL_FCOE_WRFIX	0x04000000 /* must set 1 when RSC ena */
+#define IXGBE_RDRXCTL_MBINTEN		0x10000000
+#define IXGBE_RDRXCTL_MDP_EN		0x20000000
+
+/* RQTC Bit Masks and Shifts */
+#define IXGBE_RQTC_SHIFT_TC(_i)	((_i) * 4)
+#define IXGBE_RQTC_TC0_MASK	(0x7 << 0)
+#define IXGBE_RQTC_TC1_MASK	(0x7 << 4)
+#define IXGBE_RQTC_TC2_MASK	(0x7 << 8)
+#define IXGBE_RQTC_TC3_MASK	(0x7 << 12)
+#define IXGBE_RQTC_TC4_MASK	(0x7 << 16)
+#define IXGBE_RQTC_TC5_MASK	(0x7 << 20)
+#define IXGBE_RQTC_TC6_MASK	(0x7 << 24)
+#define IXGBE_RQTC_TC7_MASK	(0x7 << 28)
+
+/* PSRTYPE.RQPL Bit masks and shift */
+#define IXGBE_PSRTYPE_RQPL_MASK		0x7
+#define IXGBE_PSRTYPE_RQPL_SHIFT	29
+
+/* CTRL Bit Masks */
+#define IXGBE_CTRL_GIO_DIS	0x00000004 /* Global IO Master Disable bit */
+#define IXGBE_CTRL_LNK_RST	0x00000008 /* Link Reset. Resets everything. */
+#define IXGBE_CTRL_RST		0x04000000 /* Reset (SW) */
+#define IXGBE_CTRL_RST_MASK	(IXGBE_CTRL_LNK_RST | IXGBE_CTRL_RST)
+
+/* FACTPS */
+#define IXGBE_FACTPS_MNGCG	0x20000000 /* Manageblility Clock Gated */
+#define IXGBE_FACTPS_LFS	0x40000000 /* LAN Function Select */
+
+/* MHADD Bit Masks */
+#define IXGBE_MHADD_MFS_MASK	0xFFFF0000
+#define IXGBE_MHADD_MFS_SHIFT	16
+
+/* Extended Device Control */
+#define IXGBE_CTRL_EXT_PFRSTD	0x00004000 /* Physical Function Reset Done */
+#define IXGBE_CTRL_EXT_NS_DIS	0x00010000 /* No Snoop disable */
+#define IXGBE_CTRL_EXT_RO_DIS	0x00020000 /* Relaxed Ordering disable */
+#define IXGBE_CTRL_EXT_DRV_LOAD	0x10000000 /* Driver loaded bit for FW */
+
+/* Direct Cache Access (DCA) definitions */
+#define IXGBE_DCA_CTRL_DCA_ENABLE	0x00000000 /* DCA Enable */
+#define IXGBE_DCA_CTRL_DCA_DISABLE	0x00000001 /* DCA Disable */
+
+#define IXGBE_DCA_CTRL_DCA_MODE_CB1	0x00 /* DCA Mode CB1 */
+#define IXGBE_DCA_CTRL_DCA_MODE_CB2	0x02 /* DCA Mode CB2 */
+
+#define IXGBE_DCA_RXCTRL_CPUID_MASK	0x0000001F /* Rx CPUID Mask */
+#define IXGBE_DCA_RXCTRL_CPUID_MASK_82599	0xFF000000 /* Rx CPUID Mask */
+#define IXGBE_DCA_RXCTRL_CPUID_SHIFT_82599	24 /* Rx CPUID Shift */
+#define IXGBE_DCA_RXCTRL_DESC_DCA_EN	(1 << 5) /* Rx Desc enable */
+#define IXGBE_DCA_RXCTRL_HEAD_DCA_EN	(1 << 6) /* Rx Desc header ena */
+#define IXGBE_DCA_RXCTRL_DATA_DCA_EN	(1 << 7) /* Rx Desc payload ena */
+#define IXGBE_DCA_RXCTRL_DESC_RRO_EN	(1 << 9) /* Rx rd Desc Relax Order */
+#define IXGBE_DCA_RXCTRL_DATA_WRO_EN	(1 << 13) /* Rx wr data Relax Order */
+#define IXGBE_DCA_RXCTRL_HEAD_WRO_EN	(1 << 15) /* Rx wr header RO */
+
+#define IXGBE_DCA_TXCTRL_CPUID_MASK	0x0000001F /* Tx CPUID Mask */
+#define IXGBE_DCA_TXCTRL_CPUID_MASK_82599	0xFF000000 /* Tx CPUID Mask */
+#define IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599	24 /* Tx CPUID Shift */
+#define IXGBE_DCA_TXCTRL_DESC_DCA_EN	(1 << 5) /* DCA Tx Desc enable */
+#define IXGBE_DCA_TXCTRL_DESC_RRO_EN	(1 << 9) /* Tx rd Desc Relax Order */
+#define IXGBE_DCA_TXCTRL_DESC_WRO_EN	(1 << 11) /* Tx Desc writeback RO bit */
+#define IXGBE_DCA_TXCTRL_DATA_RRO_EN	(1 << 13) /* Tx rd data Relax Order */
+#define IXGBE_DCA_MAX_QUEUES_82598	16 /* DCA regs only on 16 queues */
+
+/* MSCA Bit Masks */
+#define IXGBE_MSCA_NP_ADDR_MASK		0x0000FFFF /* MDI Addr (new prot) */
+#define IXGBE_MSCA_NP_ADDR_SHIFT	0
+#define IXGBE_MSCA_DEV_TYPE_MASK	0x001F0000 /* Dev Type (new prot) */
+#define IXGBE_MSCA_DEV_TYPE_SHIFT	16 /* Register Address (old prot */
+#define IXGBE_MSCA_PHY_ADDR_MASK	0x03E00000 /* PHY Address mask */
+#define IXGBE_MSCA_PHY_ADDR_SHIFT	21 /* PHY Address shift*/
+#define IXGBE_MSCA_OP_CODE_MASK		0x0C000000 /* OP CODE mask */
+#define IXGBE_MSCA_OP_CODE_SHIFT	26 /* OP CODE shift */
+#define IXGBE_MSCA_ADDR_CYCLE		0x00000000 /* OP CODE 00 (addr cycle) */
+#define IXGBE_MSCA_WRITE		0x04000000 /* OP CODE 01 (wr) */
+#define IXGBE_MSCA_READ			0x0C000000 /* OP CODE 11 (rd) */
+#define IXGBE_MSCA_READ_AUTOINC		0x08000000 /* OP CODE 10 (rd auto inc)*/
+#define IXGBE_MSCA_ST_CODE_MASK		0x30000000 /* ST Code mask */
+#define IXGBE_MSCA_ST_CODE_SHIFT	28 /* ST Code shift */
+#define IXGBE_MSCA_NEW_PROTOCOL		0x00000000 /* ST CODE 00 (new prot) */
+#define IXGBE_MSCA_OLD_PROTOCOL		0x10000000 /* ST CODE 01 (old prot) */
+#define IXGBE_MSCA_MDI_COMMAND		0x40000000 /* Initiate MDI command */
+#define IXGBE_MSCA_MDI_IN_PROG_EN	0x80000000 /* MDI in progress ena */
+
+/* MSRWD bit masks */
+#define IXGBE_MSRWD_WRITE_DATA_MASK	0x0000FFFF
+#define IXGBE_MSRWD_WRITE_DATA_SHIFT	0
+#define IXGBE_MSRWD_READ_DATA_MASK	0xFFFF0000
+#define IXGBE_MSRWD_READ_DATA_SHIFT	16
+
+/* Atlas registers */
+#define IXGBE_ATLAS_PDN_LPBK		0x24
+#define IXGBE_ATLAS_PDN_10G		0xB
+#define IXGBE_ATLAS_PDN_1G		0xC
+#define IXGBE_ATLAS_PDN_AN		0xD
+
+/* Atlas bit masks */
+#define IXGBE_ATLASCTL_WRITE_CMD	0x00010000
+#define IXGBE_ATLAS_PDN_TX_REG_EN	0x10
+#define IXGBE_ATLAS_PDN_TX_10G_QL_ALL	0xF0
+#define IXGBE_ATLAS_PDN_TX_1G_QL_ALL	0xF0
+#define IXGBE_ATLAS_PDN_TX_AN_QL_ALL	0xF0
+
+/* Omer bit masks */
+#define IXGBE_CORECTL_WRITE_CMD		0x00010000
+
+/* Device Type definitions for new protocol MDIO commands */
+#define IXGBE_MDIO_PMA_PMD_DEV_TYPE		0x1
+#define IXGBE_MDIO_PCS_DEV_TYPE			0x3
+#define IXGBE_MDIO_PHY_XS_DEV_TYPE		0x4
+#define IXGBE_MDIO_AUTO_NEG_DEV_TYPE		0x7
+#define IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE	0x1E   /* Device 30 */
+#define IXGBE_TWINAX_DEV			1
+
+#define IXGBE_MDIO_COMMAND_TIMEOUT	100 /* PHY Timeout for 1 GB mode */
+
+#define IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL		0x0 /* VS1 Ctrl Reg */
+#define IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS		0x1 /* VS1 Status Reg */
+#define IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS	0x0008 /* 1 = Link Up */
+#define IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS	0x0010 /* 0-10G, 1-1G */
+#define IXGBE_MDIO_VENDOR_SPECIFIC_1_10G_SPEED		0x0018
+#define IXGBE_MDIO_VENDOR_SPECIFIC_1_1G_SPEED		0x0010
+
+#define IXGBE_MDIO_AUTO_NEG_CONTROL	0x0 /* AUTO_NEG Control Reg */
+#define IXGBE_MDIO_AUTO_NEG_STATUS	0x1 /* AUTO_NEG Status Reg */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STAT	0xC800 /* AUTO_NEG Vendor Status Reg */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM 0xCC00 /* AUTO_NEG Vendor TX Reg */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM2 0xCC01 /* AUTO_NEG Vendor Tx Reg */
+#define IXGBE_MDIO_AUTO_NEG_VEN_LSC	0x1 /* AUTO_NEG Vendor Tx LSC */
+#define IXGBE_MDIO_AUTO_NEG_ADVT	0x10 /* AUTO_NEG Advt Reg */
+#define IXGBE_MDIO_AUTO_NEG_LP		0x13 /* AUTO_NEG LP Status Reg */
+#define IXGBE_MDIO_AUTO_NEG_EEE_ADVT	0x3C /* AUTO_NEG EEE Advt Reg */
+#define IXGBE_AUTO_NEG_10GBASE_EEE_ADVT	0x8  /* AUTO NEG EEE 10GBaseT Advt */
+#define IXGBE_AUTO_NEG_1000BASE_EEE_ADVT 0x4  /* AUTO NEG EEE 1000BaseT Advt */
+#define IXGBE_AUTO_NEG_100BASE_EEE_ADVT	0x2  /* AUTO NEG EEE 100BaseT Advt */
+#define IXGBE_MDIO_PHY_XS_CONTROL	0x0 /* PHY_XS Control Reg */
+#define IXGBE_MDIO_PHY_XS_RESET		0x8000 /* PHY_XS Reset */
+#define IXGBE_MDIO_PHY_ID_HIGH		0x2 /* PHY ID High Reg*/
+#define IXGBE_MDIO_PHY_ID_LOW		0x3 /* PHY ID Low Reg*/
+#define IXGBE_MDIO_PHY_SPEED_ABILITY	0x4 /* Speed Ability Reg */
+#define IXGBE_MDIO_PHY_SPEED_10G	0x0001 /* 10G capable */
+#define IXGBE_MDIO_PHY_SPEED_1G		0x0010 /* 1G capable */
+#define IXGBE_MDIO_PHY_SPEED_100M	0x0020 /* 100M capable */
+#define IXGBE_MDIO_PHY_EXT_ABILITY	0xB /* Ext Ability Reg */
+#define IXGBE_MDIO_PHY_10GBASET_ABILITY		0x0004 /* 10GBaseT capable */
+#define IXGBE_MDIO_PHY_1000BASET_ABILITY	0x0020 /* 1000BaseT capable */
+#define IXGBE_MDIO_PHY_100BASETX_ABILITY	0x0080 /* 100BaseTX capable */
+#define IXGBE_MDIO_PHY_SET_LOW_POWER_MODE	0x0800 /* Set low power mode */
+#define IXGBE_AUTO_NEG_LP_STATUS	0xE820 /* AUTO NEG Rx LP Status Reg */
+#define IXGBE_AUTO_NEG_LP_1000BASE_CAP	0x8000 /* AUTO NEG Rx LP 1000BaseT Cap */
+#define IXGBE_AUTO_NEG_LP_10GBASE_CAP	0x0800 /* AUTO NEG Rx LP 10GBaseT Cap */
+#define IXGBE_AUTO_NEG_10GBASET_STAT	0x0021 /* AUTO NEG 10G BaseT Stat */
+
+#define IXGBE_MDIO_TX_VENDOR_ALARMS_3		0xCC02 /* Vendor Alarms 3 Reg */
+#define IXGBE_MDIO_TX_VENDOR_ALARMS_3_RST_MASK	0x3 /* PHY Reset Complete Mask */
+#define IXGBE_MDIO_GLOBAL_RES_PR_10 0xC479 /* Global Resv Provisioning 10 Reg */
+#define IXGBE_MDIO_POWER_UP_STALL		0x8000 /* Power Up Stall */
+#define IXGBE_MDIO_GLOBAL_INT_CHIP_STD_MASK	0xFF00 /* int std mask */
+#define IXGBE_MDIO_GLOBAL_CHIP_STD_INT_FLAG	0xFC00 /* chip std int flag */
+#define IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_MASK	0xFF01 /* int chip-wide mask */
+#define IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_FLAG	0xFC01 /* int chip-wide mask */
+#define IXGBE_MDIO_GLOBAL_ALARM_1		0xCC00 /* Global alarm 1 */
+#define IXGBE_MDIO_GLOBAL_ALM_1_DEV_FAULT	0x0010 /* device fault */
+#define IXGBE_MDIO_GLOBAL_ALM_1_HI_TMP_FAIL	0x4000 /* high temp failure */
+#define IXGBE_MDIO_GLOBAL_FAULT_MSG	0xC850 /* Global Fault Message */
+#define IXGBE_MDIO_GLOBAL_FAULT_MSG_HI_TMP	0x8007 /* high temp failure */
+#define IXGBE_MDIO_GLOBAL_INT_MASK		0xD400 /* Global int mask */
+#define IXGBE_MDIO_GLOBAL_AN_VEN_ALM_INT_EN	0x1000 /* autoneg vendor alarm int enable */
+#define IXGBE_MDIO_GLOBAL_ALARM_1_INT		0x4 /* int in Global alarm 1 */
+#define IXGBE_MDIO_GLOBAL_VEN_ALM_INT_EN	0x1 /* vendor alarm int enable */
+#define IXGBE_MDIO_GLOBAL_STD_ALM2_INT		0x200 /* vendor alarm2 int mask */
+#define IXGBE_MDIO_GLOBAL_INT_HI_TEMP_EN	0x4000 /* int high temp enable */
+#define IXGBE_MDIO_GLOBAL_INT_DEV_FAULT_EN 0x0010 /* int dev fault enable */
+#define IXGBE_MDIO_PMA_PMD_CONTROL_ADDR	0x0000 /* PMA/PMD Control Reg */
+#define IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR	0xC30A /* PHY_XS SDA/SCL Addr Reg */
+#define IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA	0xC30B /* PHY_XS SDA/SCL Data Reg */
+#define IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT	0xC30C /* PHY_XS SDA/SCL Status Reg */
+#define IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK 0xD401 /* PHY TX Vendor LASI */
+#define IXGBE_MDIO_PMA_TX_VEN_LASI_INT_EN   0x1 /* PHY TX Vendor LASI enable */
+#define IXGBE_MDIO_PMD_STD_TX_DISABLE_CNTR 0x9 /* Standard Transmit Dis Reg */
+#define IXGBE_MDIO_PMD_GLOBAL_TX_DISABLE 0x0001 /* PMD Global Transmit Dis */
+
+#define IXGBE_PCRC8ECL		0x0E810 /* PCR CRC-8 Error Count Lo */
+#define IXGBE_PCRC8ECH		0x0E811 /* PCR CRC-8 Error Count Hi */
+#define IXGBE_PCRC8ECH_MASK	0x1F
+#define IXGBE_LDPCECL		0x0E820 /* PCR Uncorrected Error Count Lo */
+#define IXGBE_LDPCECH		0x0E821 /* PCR Uncorrected Error Count Hi */
+
+/* MII clause 22/28 definitions */
+#define IXGBE_MDIO_PHY_LOW_POWER_MODE	0x0800
+
+#define IXGBE_MDIO_XENPAK_LASI_STATUS		0x9005 /* XENPAK LASI Status register*/
+#define IXGBE_XENPAK_LASI_LINK_STATUS_ALARM	0x1 /* Link Status Alarm change */
+
+#define IXGBE_MDIO_AUTO_NEG_LINK_STATUS		0x4 /* Indicates if link is up */
+
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_MASK	0x7 /* Speed/Duplex Mask */
+#define IXGBE_MDIO_AUTO_NEG_VEN_STAT_SPEED_MASK		0x6 /* Speed Mask */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10M_HALF	0x0 /* 10Mb/s Half Duplex */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10M_FULL	0x1 /* 10Mb/s Full Duplex */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_100M_HALF	0x2 /* 100Mb/s Half Duplex */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_100M_FULL	0x3 /* 100Mb/s Full Duplex */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB_HALF	0x4 /* 1Gb/s Half Duplex */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB_FULL	0x5 /* 1Gb/s Full Duplex */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB_HALF	0x6 /* 10Gb/s Half Duplex */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB_FULL	0x7 /* 10Gb/s Full Duplex */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB		0x4 /* 1Gb/s */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB		0x6 /* 10Gb/s */
+
+#define IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG	0x20   /* 10G Control Reg */
+#define IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG 0xC400 /* 1G Provisioning 1 */
+#define IXGBE_MII_AUTONEG_XNP_TX_REG		0x17   /* 1G XNP Transmit */
+#define IXGBE_MII_AUTONEG_ADVERTISE_REG		0x10   /* 100M Advertisement */
+#define IXGBE_MII_10GBASE_T_ADVERTISE		0x1000 /* full duplex, bit:12*/
+#define IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX	0x4000 /* full duplex, bit:14*/
+#define IXGBE_MII_1GBASE_T_ADVERTISE		0x8000 /* full duplex, bit:15*/
+#define IXGBE_MII_2_5GBASE_T_ADVERTISE		0x0400
+#define IXGBE_MII_5GBASE_T_ADVERTISE		0x0800
+#define IXGBE_MII_100BASE_T_ADVERTISE		0x0100 /* full duplex, bit:8 */
+#define IXGBE_MII_100BASE_T_ADVERTISE_HALF	0x0080 /* half duplex, bit:7 */
+#define IXGBE_MII_RESTART			0x200
+#define IXGBE_MII_AUTONEG_COMPLETE		0x20
+#define IXGBE_MII_AUTONEG_LINK_UP		0x04
+#define IXGBE_MII_AUTONEG_REG			0x0
+
+#define IXGBE_PHY_REVISION_MASK		0xFFFFFFF0
+#define IXGBE_MAX_PHY_ADDR		32
+
+/* PHY IDs*/
+#define TN1010_PHY_ID	0x00A19410
+#define TNX_FW_REV	0xB
+#define X540_PHY_ID	0x01540200
+#define X550_PHY_ID1	0x01540220
+#define X550_PHY_ID2	0x01540223
+#define X550_PHY_ID3	0x01540221
+#define X557_PHY_ID	0x01540240
+#define AQ_FW_REV	0x20
+#define QT2022_PHY_ID	0x0043A400
+#define ATH_PHY_ID	0x03429050
+
+/* PHY Types */
+#define IXGBE_M88E1145_E_PHY_ID	0x01410CD0
+
+/* Special PHY Init Routine */
+#define IXGBE_PHY_INIT_OFFSET_NL	0x002B
+#define IXGBE_PHY_INIT_END_NL		0xFFFF
+#define IXGBE_CONTROL_MASK_NL		0xF000
+#define IXGBE_DATA_MASK_NL		0x0FFF
+#define IXGBE_CONTROL_SHIFT_NL		12
+#define IXGBE_DELAY_NL			0
+#define IXGBE_DATA_NL			1
+#define IXGBE_CONTROL_NL		0x000F
+#define IXGBE_CONTROL_EOL_NL		0x0FFF
+#define IXGBE_CONTROL_SOL_NL		0x0000
+
+/* General purpose Interrupt Enable */
+#define IXGBE_SDP0_GPIEN	0x00000001 /* SDP0 */
+#define IXGBE_SDP1_GPIEN	0x00000002 /* SDP1 */
+#define IXGBE_SDP2_GPIEN	0x00000004 /* SDP2 */
+#define IXGBE_SDP0_GPIEN_X540	0x00000002 /* SDP0 on X540 and X550 */
+#define IXGBE_SDP1_GPIEN_X540	0x00000004 /* SDP1 on X540 and X550 */
+#define IXGBE_SDP2_GPIEN_X540	0x00000008 /* SDP2 on X540 and X550 */
+#define IXGBE_SDP0_GPIEN_X550	IXGBE_SDP0_GPIEN_X540
+#define IXGBE_SDP1_GPIEN_X550	IXGBE_SDP1_GPIEN_X540
+#define IXGBE_SDP2_GPIEN_X550	IXGBE_SDP2_GPIEN_X540
+#define IXGBE_SDP0_GPIEN_X550EM_x	IXGBE_SDP0_GPIEN_X540
+#define IXGBE_SDP1_GPIEN_X550EM_x	IXGBE_SDP1_GPIEN_X540
+#define IXGBE_SDP2_GPIEN_X550EM_x	IXGBE_SDP2_GPIEN_X540
+#define IXGBE_SDP0_GPIEN_X550EM_a	IXGBE_SDP0_GPIEN_X540
+#define IXGBE_SDP1_GPIEN_X550EM_a	IXGBE_SDP1_GPIEN_X540
+#define IXGBE_SDP2_GPIEN_X550EM_a	IXGBE_SDP2_GPIEN_X540
+#define IXGBE_SDP0_GPIEN_BY_MAC(_hw)	IXGBE_BY_MAC((_hw), SDP0_GPIEN)
+#define IXGBE_SDP1_GPIEN_BY_MAC(_hw)	IXGBE_BY_MAC((_hw), SDP1_GPIEN)
+#define IXGBE_SDP2_GPIEN_BY_MAC(_hw)	IXGBE_BY_MAC((_hw), SDP2_GPIEN)
+
+#define IXGBE_GPIE_MSIX_MODE	0x00000010 /* MSI-X mode */
+#define IXGBE_GPIE_OCD		0x00000020 /* Other Clear Disable */
+#define IXGBE_GPIE_EIMEN	0x00000040 /* Immediate Interrupt Enable */
+#define IXGBE_GPIE_EIAME	0x40000000
+#define IXGBE_GPIE_PBA_SUPPORT	0x80000000
+#define IXGBE_GPIE_RSC_DELAY_SHIFT	11
+#define IXGBE_GPIE_VTMODE_MASK	0x0000C000 /* VT Mode Mask */
+#define IXGBE_GPIE_VTMODE_16	0x00004000 /* 16 VFs 8 queues per VF */
+#define IXGBE_GPIE_VTMODE_32	0x00008000 /* 32 VFs 4 queues per VF */
+#define IXGBE_GPIE_VTMODE_64	0x0000C000 /* 64 VFs 2 queues per VF */
+
+/* Packet Buffer Initialization */
+#define IXGBE_MAX_PACKET_BUFFERS	8
+
+#define IXGBE_TXPBSIZE_20KB	0x00005000 /* 20KB Packet Buffer */
+#define IXGBE_TXPBSIZE_40KB	0x0000A000 /* 40KB Packet Buffer */
+#define IXGBE_RXPBSIZE_48KB	0x0000C000 /* 48KB Packet Buffer */
+#define IXGBE_RXPBSIZE_64KB	0x00010000 /* 64KB Packet Buffer */
+#define IXGBE_RXPBSIZE_80KB	0x00014000 /* 80KB Packet Buffer */
+#define IXGBE_RXPBSIZE_128KB	0x00020000 /* 128KB Packet Buffer */
+#define IXGBE_RXPBSIZE_MAX	0x00080000 /* 512KB Packet Buffer */
+#define IXGBE_TXPBSIZE_MAX	0x00028000 /* 160KB Packet Buffer */
+
+#define IXGBE_TXPKT_SIZE_MAX	0xA /* Max Tx Packet size */
+#define IXGBE_MAX_PB		8
+
+/* Packet buffer allocation strategies */
+enum {
+	PBA_STRATEGY_EQUAL	= 0, /* Distribute PB space equally */
+#define PBA_STRATEGY_EQUAL	PBA_STRATEGY_EQUAL
+	PBA_STRATEGY_WEIGHTED	= 1, /* Weight front half of TCs */
+#define PBA_STRATEGY_WEIGHTED	PBA_STRATEGY_WEIGHTED
+};
+
+/* Transmit Flow Control status */
+#define IXGBE_TFCS_TXOFF	0x00000001
+#define IXGBE_TFCS_TXOFF0	0x00000100
+#define IXGBE_TFCS_TXOFF1	0x00000200
+#define IXGBE_TFCS_TXOFF2	0x00000400
+#define IXGBE_TFCS_TXOFF3	0x00000800
+#define IXGBE_TFCS_TXOFF4	0x00001000
+#define IXGBE_TFCS_TXOFF5	0x00002000
+#define IXGBE_TFCS_TXOFF6	0x00004000
+#define IXGBE_TFCS_TXOFF7	0x00008000
+
+/* TCP Timer */
+#define IXGBE_TCPTIMER_KS		0x00000100
+#define IXGBE_TCPTIMER_COUNT_ENABLE	0x00000200
+#define IXGBE_TCPTIMER_COUNT_FINISH	0x00000400
+#define IXGBE_TCPTIMER_LOOP		0x00000800
+#define IXGBE_TCPTIMER_DURATION_MASK	0x000000FF
+
+/* HLREG0 Bit Masks */
+#define IXGBE_HLREG0_TXCRCEN		0x00000001 /* bit  0 */
+#define IXGBE_HLREG0_RXCRCSTRP		0x00000002 /* bit  1 */
+#define IXGBE_HLREG0_JUMBOEN		0x00000004 /* bit  2 */
+#define IXGBE_HLREG0_TXPADEN		0x00000400 /* bit 10 */
+#define IXGBE_HLREG0_TXPAUSEEN		0x00001000 /* bit 12 */
+#define IXGBE_HLREG0_RXPAUSEEN		0x00004000 /* bit 14 */
+#define IXGBE_HLREG0_LPBK		0x00008000 /* bit 15 */
+#define IXGBE_HLREG0_MDCSPD		0x00010000 /* bit 16 */
+#define IXGBE_HLREG0_CONTMDC		0x00020000 /* bit 17 */
+#define IXGBE_HLREG0_CTRLFLTR		0x00040000 /* bit 18 */
+#define IXGBE_HLREG0_PREPEND		0x00F00000 /* bits 20-23 */
+#define IXGBE_HLREG0_PRIPAUSEEN		0x01000000 /* bit 24 */
+#define IXGBE_HLREG0_RXPAUSERECDA	0x06000000 /* bits 25-26 */
+#define IXGBE_HLREG0_RXLNGTHERREN	0x08000000 /* bit 27 */
+#define IXGBE_HLREG0_RXPADSTRIPEN	0x10000000 /* bit 28 */
+
+/* VMD_CTL bitmasks */
+#define IXGBE_VMD_CTL_VMDQ_EN		0x00000001
+#define IXGBE_VMD_CTL_VMDQ_FILTER	0x00000002
+
+/* VT_CTL bitmasks */
+#define IXGBE_VT_CTL_DIS_DEFPL		0x20000000 /* disable default pool */
+#define IXGBE_VT_CTL_REPLEN		0x40000000 /* replication enabled */
+#define IXGBE_VT_CTL_VT_ENABLE		0x00000001  /* Enable VT Mode */
+#define IXGBE_VT_CTL_POOL_SHIFT		7
+#define IXGBE_VT_CTL_POOL_MASK		(0x3F << IXGBE_VT_CTL_POOL_SHIFT)
+
+/* VMOLR bitmasks */
+#define IXGBE_VMOLR_AUPE	0x01000000 /* accept untagged packets */
+#define IXGBE_VMOLR_ROMPE	0x02000000 /* accept packets in MTA tbl */
+#define IXGBE_VMOLR_ROPE	0x04000000 /* accept packets in UC tbl */
+#define IXGBE_VMOLR_BAM		0x08000000 /* accept broadcast packets */
+#define IXGBE_VMOLR_MPE		0x10000000 /* multicast promiscuous */
+
+/* VFRE bitmask */
+#define IXGBE_VFRE_ENABLE_ALL	0xFFFFFFFF
+
+#define IXGBE_VF_INIT_TIMEOUT	200 /* Number of retries to clear RSTI */
+
+/* RDHMPN and TDHMPN bitmasks */
+#define IXGBE_RDHMPN_RDICADDR		0x007FF800
+#define IXGBE_RDHMPN_RDICRDREQ		0x00800000
+#define IXGBE_RDHMPN_RDICADDR_SHIFT	11
+#define IXGBE_TDHMPN_TDICADDR		0x003FF800
+#define IXGBE_TDHMPN_TDICRDREQ		0x00800000
+#define IXGBE_TDHMPN_TDICADDR_SHIFT	11
+
+#define IXGBE_RDMAM_MEM_SEL_SHIFT		13
+#define IXGBE_RDMAM_DWORD_SHIFT			9
+#define IXGBE_RDMAM_DESC_COMP_FIFO		1
+#define IXGBE_RDMAM_DFC_CMD_FIFO		2
+#define IXGBE_RDMAM_RSC_HEADER_ADDR		3
+#define IXGBE_RDMAM_TCN_STATUS_RAM		4
+#define IXGBE_RDMAM_WB_COLL_FIFO		5
+#define IXGBE_RDMAM_QSC_CNT_RAM			6
+#define IXGBE_RDMAM_QSC_FCOE_RAM		7
+#define IXGBE_RDMAM_QSC_QUEUE_CNT		8
+#define IXGBE_RDMAM_QSC_QUEUE_RAM		0xA
+#define IXGBE_RDMAM_QSC_RSC_RAM			0xB
+#define IXGBE_RDMAM_DESC_COM_FIFO_RANGE		135
+#define IXGBE_RDMAM_DESC_COM_FIFO_COUNT		4
+#define IXGBE_RDMAM_DFC_CMD_FIFO_RANGE		48
+#define IXGBE_RDMAM_DFC_CMD_FIFO_COUNT		7
+#define IXGBE_RDMAM_RSC_HEADER_ADDR_RANGE	32
+#define IXGBE_RDMAM_RSC_HEADER_ADDR_COUNT	4
+#define IXGBE_RDMAM_TCN_STATUS_RAM_RANGE	256
+#define IXGBE_RDMAM_TCN_STATUS_RAM_COUNT	9
+#define IXGBE_RDMAM_WB_COLL_FIFO_RANGE		8
+#define IXGBE_RDMAM_WB_COLL_FIFO_COUNT		4
+#define IXGBE_RDMAM_QSC_CNT_RAM_RANGE		64
+#define IXGBE_RDMAM_QSC_CNT_RAM_COUNT		4
+#define IXGBE_RDMAM_QSC_FCOE_RAM_RANGE		512
+#define IXGBE_RDMAM_QSC_FCOE_RAM_COUNT		5
+#define IXGBE_RDMAM_QSC_QUEUE_CNT_RANGE		32
+#define IXGBE_RDMAM_QSC_QUEUE_CNT_COUNT		4
+#define IXGBE_RDMAM_QSC_QUEUE_RAM_RANGE		128
+#define IXGBE_RDMAM_QSC_QUEUE_RAM_COUNT		8
+#define IXGBE_RDMAM_QSC_RSC_RAM_RANGE		32
+#define IXGBE_RDMAM_QSC_RSC_RAM_COUNT		8
+
+#define IXGBE_TXDESCIC_READY	0x80000000
+
+/* Receive Checksum Control */
+#define IXGBE_RXCSUM_IPPCSE	0x00001000 /* IP payload checksum enable */
+#define IXGBE_RXCSUM_PCSD	0x00002000 /* packet checksum disabled */
+
+/* FCRTL Bit Masks */
+#define IXGBE_FCRTL_XONE	0x80000000 /* XON enable */
+#define IXGBE_FCRTH_FCEN	0x80000000 /* Packet buffer fc enable */
+
+/* PAP bit masks*/
+#define IXGBE_PAP_TXPAUSECNT_MASK	0x0000FFFF /* Pause counter mask */
+
+/* RMCS Bit Masks */
+#define IXGBE_RMCS_RRM			0x00000002 /* Rx Recycle Mode enable */
+/* Receive Arbitration Control: 0 Round Robin, 1 DFP */
+#define IXGBE_RMCS_RAC			0x00000004
+/* Deficit Fixed Prio ena */
+#define IXGBE_RMCS_DFP			IXGBE_RMCS_RAC
+#define IXGBE_RMCS_TFCE_802_3X		0x00000008 /* Tx Priority FC ena */
+#define IXGBE_RMCS_TFCE_PRIORITY	0x00000010 /* Tx Priority FC ena */
+#define IXGBE_RMCS_ARBDIS		0x00000040 /* Arbitration disable bit */
+
+/* FCCFG Bit Masks */
+#define IXGBE_FCCFG_TFCE_802_3X		0x00000008 /* Tx link FC enable */
+#define IXGBE_FCCFG_TFCE_PRIORITY	0x00000010 /* Tx priority FC enable */
+
+/* Interrupt register bitmasks */
+
+/* Extended Interrupt Cause Read */
+#define IXGBE_EICR_RTX_QUEUE	0x0000FFFF /* RTx Queue Interrupt */
+#define IXGBE_EICR_FLOW_DIR	0x00010000 /* FDir Exception */
+#define IXGBE_EICR_RX_MISS	0x00020000 /* Packet Buffer Overrun */
+#define IXGBE_EICR_PCI		0x00040000 /* PCI Exception */
+#define IXGBE_EICR_MAILBOX	0x00080000 /* VF to PF Mailbox Interrupt */
+#define IXGBE_EICR_LSC		0x00100000 /* Link Status Change */
+#define IXGBE_EICR_LINKSEC	0x00200000 /* PN Threshold */
+#define IXGBE_EICR_MNG		0x00400000 /* Manageability Event Interrupt */
+#define IXGBE_EICR_TS		0x00800000 /* Thermal Sensor Event */
+#define IXGBE_EICR_TIMESYNC	0x01000000 /* Timesync Event */
+#define IXGBE_EICR_GPI_SDP0	0x01000000 /* Gen Purpose Interrupt on SDP0 */
+#define IXGBE_EICR_GPI_SDP1	0x02000000 /* Gen Purpose Interrupt on SDP1 */
+#define IXGBE_EICR_GPI_SDP2	0x04000000 /* Gen Purpose Interrupt on SDP2 */
+#define IXGBE_EICR_ECC		0x10000000 /* ECC Error */
+#define IXGBE_EICR_GPI_SDP0_X540 0x02000000 /* Gen Purpose Interrupt on SDP0 */
+#define IXGBE_EICR_GPI_SDP1_X540 0x04000000 /* Gen Purpose Interrupt on SDP1 */
+#define IXGBE_EICR_GPI_SDP2_X540 0x08000000 /* Gen Purpose Interrupt on SDP2 */
+#define IXGBE_EICR_GPI_SDP0_X550	IXGBE_EICR_GPI_SDP0_X540
+#define IXGBE_EICR_GPI_SDP1_X550	IXGBE_EICR_GPI_SDP1_X540
+#define IXGBE_EICR_GPI_SDP2_X550	IXGBE_EICR_GPI_SDP2_X540
+#define IXGBE_EICR_GPI_SDP0_X550EM_x	IXGBE_EICR_GPI_SDP0_X540
+#define IXGBE_EICR_GPI_SDP1_X550EM_x	IXGBE_EICR_GPI_SDP1_X540
+#define IXGBE_EICR_GPI_SDP2_X550EM_x	IXGBE_EICR_GPI_SDP2_X540
+#define IXGBE_EICR_GPI_SDP0_X550EM_a	IXGBE_EICR_GPI_SDP0_X540
+#define IXGBE_EICR_GPI_SDP1_X550EM_a	IXGBE_EICR_GPI_SDP1_X540
+#define IXGBE_EICR_GPI_SDP2_X550EM_a	IXGBE_EICR_GPI_SDP2_X540
+#define IXGBE_EICR_GPI_SDP0_BY_MAC(_hw)	IXGBE_BY_MAC((_hw), EICR_GPI_SDP0)
+#define IXGBE_EICR_GPI_SDP1_BY_MAC(_hw)	IXGBE_BY_MAC((_hw), EICR_GPI_SDP1)
+#define IXGBE_EICR_GPI_SDP2_BY_MAC(_hw)	IXGBE_BY_MAC((_hw), EICR_GPI_SDP2)
+
+#define IXGBE_EICR_PBUR		0x10000000 /* Packet Buffer Handler Error */
+#define IXGBE_EICR_DHER		0x20000000 /* Descriptor Handler Error */
+#define IXGBE_EICR_TCP_TIMER	0x40000000 /* TCP Timer */
+#define IXGBE_EICR_OTHER	0x80000000 /* Interrupt Cause Active */
+
+/* Extended Interrupt Cause Set */
+#define IXGBE_EICS_RTX_QUEUE	IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */
+#define IXGBE_EICS_FLOW_DIR	IXGBE_EICR_FLOW_DIR  /* FDir Exception */
+#define IXGBE_EICS_RX_MISS	IXGBE_EICR_RX_MISS   /* Pkt Buffer Overrun */
+#define IXGBE_EICS_PCI		IXGBE_EICR_PCI /* PCI Exception */
+#define IXGBE_EICS_MAILBOX	IXGBE_EICR_MAILBOX   /* VF to PF Mailbox Int */
+#define IXGBE_EICS_LSC		IXGBE_EICR_LSC /* Link Status Change */
+#define IXGBE_EICS_MNG		IXGBE_EICR_MNG /* MNG Event Interrupt */
+#define IXGBE_EICS_TIMESYNC	IXGBE_EICR_TIMESYNC /* Timesync Event */
+#define IXGBE_EICS_GPI_SDP0	IXGBE_EICR_GPI_SDP0 /* SDP0 Gen Purpose Int */
+#define IXGBE_EICS_GPI_SDP1	IXGBE_EICR_GPI_SDP1 /* SDP1 Gen Purpose Int */
+#define IXGBE_EICS_GPI_SDP2	IXGBE_EICR_GPI_SDP2 /* SDP2 Gen Purpose Int */
+#define IXGBE_EICS_ECC		IXGBE_EICR_ECC /* ECC Error */
+#define IXGBE_EICS_GPI_SDP0_BY_MAC(_hw)	IXGBE_EICR_GPI_SDP0_BY_MAC(_hw)
+#define IXGBE_EICS_GPI_SDP1_BY_MAC(_hw)	IXGBE_EICR_GPI_SDP1_BY_MAC(_hw)
+#define IXGBE_EICS_GPI_SDP2_BY_MAC(_hw)	IXGBE_EICR_GPI_SDP2_BY_MAC(_hw)
+#define IXGBE_EICS_PBUR		IXGBE_EICR_PBUR /* Pkt Buf Handler Err */
+#define IXGBE_EICS_DHER		IXGBE_EICR_DHER /* Desc Handler Error */
+#define IXGBE_EICS_TCP_TIMER	IXGBE_EICR_TCP_TIMER /* TCP Timer */
+#define IXGBE_EICS_OTHER	IXGBE_EICR_OTHER /* INT Cause Active */
+
+/* Extended Interrupt Mask Set */
+#define IXGBE_EIMS_RTX_QUEUE	IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */
+#define IXGBE_EIMS_FLOW_DIR	IXGBE_EICR_FLOW_DIR /* FDir Exception */
+#define IXGBE_EIMS_RX_MISS	IXGBE_EICR_RX_MISS /* Packet Buffer Overrun */
+#define IXGBE_EIMS_PCI		IXGBE_EICR_PCI /* PCI Exception */
+#define IXGBE_EIMS_MAILBOX	IXGBE_EICR_MAILBOX   /* VF to PF Mailbox Int */
+#define IXGBE_EIMS_LSC		IXGBE_EICR_LSC /* Link Status Change */
+#define IXGBE_EIMS_MNG		IXGBE_EICR_MNG /* MNG Event Interrupt */
+#define IXGBE_EIMS_TS		IXGBE_EICR_TS /* Thermal Sensor Event */
+#define IXGBE_EIMS_TIMESYNC	IXGBE_EICR_TIMESYNC /* Timesync Event */
+#define IXGBE_EIMS_GPI_SDP0	IXGBE_EICR_GPI_SDP0 /* SDP0 Gen Purpose Int */
+#define IXGBE_EIMS_GPI_SDP1	IXGBE_EICR_GPI_SDP1 /* SDP1 Gen Purpose Int */
+#define IXGBE_EIMS_GPI_SDP2	IXGBE_EICR_GPI_SDP2 /* SDP2 Gen Purpose Int */
+#define IXGBE_EIMS_ECC		IXGBE_EICR_ECC /* ECC Error */
+#define IXGBE_EIMS_GPI_SDP0_BY_MAC(_hw)	IXGBE_EICR_GPI_SDP0_BY_MAC(_hw)
+#define IXGBE_EIMS_GPI_SDP1_BY_MAC(_hw)	IXGBE_EICR_GPI_SDP1_BY_MAC(_hw)
+#define IXGBE_EIMS_GPI_SDP2_BY_MAC(_hw)	IXGBE_EICR_GPI_SDP2_BY_MAC(_hw)
+#define IXGBE_EIMS_PBUR		IXGBE_EICR_PBUR /* Pkt Buf Handler Err */
+#define IXGBE_EIMS_DHER		IXGBE_EICR_DHER /* Descr Handler Error */
+#define IXGBE_EIMS_TCP_TIMER	IXGBE_EICR_TCP_TIMER /* TCP Timer */
+#define IXGBE_EIMS_OTHER	IXGBE_EICR_OTHER /* INT Cause Active */
+
+/* Extended Interrupt Mask Clear */
+#define IXGBE_EIMC_RTX_QUEUE	IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */
+#define IXGBE_EIMC_FLOW_DIR	IXGBE_EICR_FLOW_DIR /* FDir Exception */
+#define IXGBE_EIMC_RX_MISS	IXGBE_EICR_RX_MISS /* Packet Buffer Overrun */
+#define IXGBE_EIMC_PCI		IXGBE_EICR_PCI /* PCI Exception */
+#define IXGBE_EIMC_MAILBOX	IXGBE_EICR_MAILBOX /* VF to PF Mailbox Int */
+#define IXGBE_EIMC_LSC		IXGBE_EICR_LSC /* Link Status Change */
+#define IXGBE_EIMC_MNG		IXGBE_EICR_MNG /* MNG Event Interrupt */
+#define IXGBE_EIMC_TIMESYNC	IXGBE_EICR_TIMESYNC /* Timesync Event */
+#define IXGBE_EIMC_GPI_SDP0	IXGBE_EICR_GPI_SDP0 /* SDP0 Gen Purpose Int */
+#define IXGBE_EIMC_GPI_SDP1	IXGBE_EICR_GPI_SDP1 /* SDP1 Gen Purpose Int */
+#define IXGBE_EIMC_GPI_SDP2	IXGBE_EICR_GPI_SDP2  /* SDP2 Gen Purpose Int */
+#define IXGBE_EIMC_ECC		IXGBE_EICR_ECC /* ECC Error */
+#define IXGBE_EIMC_GPI_SDP0_BY_MAC(_hw)	IXGBE_EICR_GPI_SDP0_BY_MAC(_hw)
+#define IXGBE_EIMC_GPI_SDP1_BY_MAC(_hw)	IXGBE_EICR_GPI_SDP1_BY_MAC(_hw)
+#define IXGBE_EIMC_GPI_SDP2_BY_MAC(_hw)	IXGBE_EICR_GPI_SDP2_BY_MAC(_hw)
+#define IXGBE_EIMC_PBUR		IXGBE_EICR_PBUR /* Pkt Buf Handler Err */
+#define IXGBE_EIMC_DHER		IXGBE_EICR_DHER /* Desc Handler Err */
+#define IXGBE_EIMC_TCP_TIMER	IXGBE_EICR_TCP_TIMER /* TCP Timer */
+#define IXGBE_EIMC_OTHER	IXGBE_EICR_OTHER /* INT Cause Active */
+
+#define IXGBE_EIMS_ENABLE_MASK ( \
+				IXGBE_EIMS_RTX_QUEUE	| \
+				IXGBE_EIMS_LSC		| \
+				IXGBE_EIMS_TCP_TIMER	| \
+				IXGBE_EIMS_OTHER)
+
+/* Immediate Interrupt Rx (A.K.A. Low Latency Interrupt) */
+#define IXGBE_IMIR_PORT_IM_EN	0x00010000  /* TCP port enable */
+#define IXGBE_IMIR_PORT_BP	0x00020000  /* TCP port check bypass */
+#define IXGBE_IMIREXT_SIZE_BP	0x00001000  /* Packet size bypass */
+#define IXGBE_IMIREXT_CTRL_URG	0x00002000  /* Check URG bit in header */
+#define IXGBE_IMIREXT_CTRL_ACK	0x00004000  /* Check ACK bit in header */
+#define IXGBE_IMIREXT_CTRL_PSH	0x00008000  /* Check PSH bit in header */
+#define IXGBE_IMIREXT_CTRL_RST	0x00010000  /* Check RST bit in header */
+#define IXGBE_IMIREXT_CTRL_SYN	0x00020000  /* Check SYN bit in header */
+#define IXGBE_IMIREXT_CTRL_FIN	0x00040000  /* Check FIN bit in header */
+#define IXGBE_IMIREXT_CTRL_BP	0x00080000  /* Bypass check of control bits */
+#define IXGBE_IMIR_SIZE_BP_82599	0x00001000 /* Packet size bypass */
+#define IXGBE_IMIR_CTRL_URG_82599	0x00002000 /* Check URG bit in header */
+#define IXGBE_IMIR_CTRL_ACK_82599	0x00004000 /* Check ACK bit in header */
+#define IXGBE_IMIR_CTRL_PSH_82599	0x00008000 /* Check PSH bit in header */
+#define IXGBE_IMIR_CTRL_RST_82599	0x00010000 /* Check RST bit in header */
+#define IXGBE_IMIR_CTRL_SYN_82599	0x00020000 /* Check SYN bit in header */
+#define IXGBE_IMIR_CTRL_FIN_82599	0x00040000 /* Check FIN bit in header */
+#define IXGBE_IMIR_CTRL_BP_82599	0x00080000 /* Bypass chk of ctrl bits */
+#define IXGBE_IMIR_LLI_EN_82599		0x00100000 /* Enables low latency Int */
+#define IXGBE_IMIR_RX_QUEUE_MASK_82599	0x0000007F /* Rx Queue Mask */
+#define IXGBE_IMIR_RX_QUEUE_SHIFT_82599	21 /* Rx Queue Shift */
+#define IXGBE_IMIRVP_PRIORITY_MASK	0x00000007 /* VLAN priority mask */
+#define IXGBE_IMIRVP_PRIORITY_EN	0x00000008 /* VLAN priority enable */
+
+#define IXGBE_MAX_FTQF_FILTERS		128
+#define IXGBE_FTQF_PROTOCOL_MASK	0x00000003
+#define IXGBE_FTQF_PROTOCOL_TCP		0x00000000
+#define IXGBE_FTQF_PROTOCOL_UDP		0x00000001
+#define IXGBE_FTQF_PROTOCOL_SCTP	2
+#define IXGBE_FTQF_PRIORITY_MASK	0x00000007
+#define IXGBE_FTQF_PRIORITY_SHIFT	2
+#define IXGBE_FTQF_POOL_MASK		0x0000003F
+#define IXGBE_FTQF_POOL_SHIFT		8
+#define IXGBE_FTQF_5TUPLE_MASK_MASK	0x0000001F
+#define IXGBE_FTQF_5TUPLE_MASK_SHIFT	25
+#define IXGBE_FTQF_SOURCE_ADDR_MASK	0x1E
+#define IXGBE_FTQF_DEST_ADDR_MASK	0x1D
+#define IXGBE_FTQF_SOURCE_PORT_MASK	0x1B
+#define IXGBE_FTQF_DEST_PORT_MASK	0x17
+#define IXGBE_FTQF_PROTOCOL_COMP_MASK	0x0F
+#define IXGBE_FTQF_POOL_MASK_EN		0x40000000
+#define IXGBE_FTQF_QUEUE_ENABLE		0x80000000
+
+/* Interrupt clear mask */
+#define IXGBE_IRQ_CLEAR_MASK	0xFFFFFFFF
+
+/* Interrupt Vector Allocation Registers */
+#define IXGBE_IVAR_REG_NUM		25
+#define IXGBE_IVAR_REG_NUM_82599	64
+#define IXGBE_IVAR_TXRX_ENTRY		96
+#define IXGBE_IVAR_RX_ENTRY		64
+#define IXGBE_IVAR_RX_QUEUE(_i)		(0 + (_i))
+#define IXGBE_IVAR_TX_QUEUE(_i)		(64 + (_i))
+#define IXGBE_IVAR_TX_ENTRY		32
+
+#define IXGBE_IVAR_TCP_TIMER_INDEX	96 /* 0 based index */
+#define IXGBE_IVAR_OTHER_CAUSES_INDEX	97 /* 0 based index */
+
+#define IXGBE_MSIX_VECTOR(_i)		(0 + (_i))
+
+#define IXGBE_IVAR_ALLOC_VAL		0x80 /* Interrupt Allocation valid */
+
+/* ETYPE Queue Filter/Select Bit Masks */
+#define IXGBE_MAX_ETQF_FILTERS		8
+#define IXGBE_ETQF_FCOE			0x08000000 /* bit 27 */
+#define IXGBE_ETQF_BCN			0x10000000 /* bit 28 */
+#define IXGBE_ETQF_TX_ANTISPOOF		0x20000000 /* bit 29 */
+#define IXGBE_ETQF_1588			0x40000000 /* bit 30 */
+#define IXGBE_ETQF_FILTER_EN		0x80000000 /* bit 31 */
+#define IXGBE_ETQF_POOL_ENABLE		(1 << 26) /* bit 26 */
+#define IXGBE_ETQF_POOL_SHIFT		20
+
+#define IXGBE_ETQS_RX_QUEUE		0x007F0000 /* bits 22:16 */
+#define IXGBE_ETQS_RX_QUEUE_SHIFT	16
+#define IXGBE_ETQS_LLI			0x20000000 /* bit 29 */
+#define IXGBE_ETQS_QUEUE_EN		0x80000000 /* bit 31 */
+
+/*
+ * ETQF filter list: one static filter per filter consumer. This is
+ *		   to avoid filter collisions later. Add new filters
+ *		   here!!
+ *
+ * Current filters:
+ *	EAPOL 802.1x (0x888e): Filter 0
+ *	FCoE (0x8906):	 Filter 2
+ *	1588 (0x88f7):	 Filter 3
+ *	FIP  (0x8914):	 Filter 4
+ *	LLDP (0x88CC):	 Filter 5
+ *	LACP (0x8809):	 Filter 6
+ *	FC   (0x8808):	 Filter 7
+ */
+#define IXGBE_ETQF_FILTER_EAPOL		0
+#define IXGBE_ETQF_FILTER_FCOE		2
+#define IXGBE_ETQF_FILTER_1588		3
+#define IXGBE_ETQF_FILTER_FIP		4
+#define IXGBE_ETQF_FILTER_LLDP		5
+#define IXGBE_ETQF_FILTER_LACP		6
+#define IXGBE_ETQF_FILTER_FC		7
+/* VLAN Control Bit Masks */
+#define IXGBE_VLNCTRL_VET		0x0000FFFF  /* bits 0-15 */
+#define IXGBE_VLNCTRL_CFI		0x10000000  /* bit 28 */
+#define IXGBE_VLNCTRL_CFIEN		0x20000000  /* bit 29 */
+#define IXGBE_VLNCTRL_VFE		0x40000000  /* bit 30 */
+#define IXGBE_VLNCTRL_VME		0x80000000  /* bit 31 */
+
+/* VLAN pool filtering masks */
+#define IXGBE_VLVF_VIEN			0x80000000  /* filter is valid */
+#define IXGBE_VLVF_ENTRIES		64
+#define IXGBE_VLVF_VLANID_MASK		0x00000FFF
+/* Per VF Port VLAN insertion rules */
+#define IXGBE_VMVIR_VLANA_DEFAULT	0x40000000 /* Always use default VLAN */
+#define IXGBE_VMVIR_VLANA_NEVER		0x80000000 /* Never insert VLAN tag */
+
+#define IXGBE_ETHERNET_IEEE_VLAN_TYPE	0x8100  /* 802.1q protocol */
+
+/* STATUS Bit Masks */
+#define IXGBE_STATUS_LAN_ID		0x0000000C /* LAN ID */
+#define IXGBE_STATUS_LAN_ID_SHIFT	2 /* LAN ID Shift*/
+#define IXGBE_STATUS_GIO		0x00080000 /* GIO Master Ena Status */
+
+#define IXGBE_STATUS_LAN_ID_0	0x00000000 /* LAN ID 0 */
+#define IXGBE_STATUS_LAN_ID_1	0x00000004 /* LAN ID 1 */
+
+/* ESDP Bit Masks */
+#define IXGBE_ESDP_SDP0		0x00000001 /* SDP0 Data Value */
+#define IXGBE_ESDP_SDP1		0x00000002 /* SDP1 Data Value */
+#define IXGBE_ESDP_SDP2		0x00000004 /* SDP2 Data Value */
+#define IXGBE_ESDP_SDP3		0x00000008 /* SDP3 Data Value */
+#define IXGBE_ESDP_SDP4		0x00000010 /* SDP4 Data Value */
+#define IXGBE_ESDP_SDP5		0x00000020 /* SDP5 Data Value */
+#define IXGBE_ESDP_SDP6		0x00000040 /* SDP6 Data Value */
+#define IXGBE_ESDP_SDP7		0x00000080 /* SDP7 Data Value */
+#define IXGBE_ESDP_SDP0_DIR	0x00000100 /* SDP0 IO direction */
+#define IXGBE_ESDP_SDP1_DIR	0x00000200 /* SDP1 IO direction */
+#define IXGBE_ESDP_SDP2_DIR	0x00000400 /* SDP1 IO direction */
+#define IXGBE_ESDP_SDP3_DIR	0x00000800 /* SDP3 IO direction */
+#define IXGBE_ESDP_SDP4_DIR	0x00001000 /* SDP4 IO direction */
+#define IXGBE_ESDP_SDP5_DIR	0x00002000 /* SDP5 IO direction */
+#define IXGBE_ESDP_SDP6_DIR	0x00004000 /* SDP6 IO direction */
+#define IXGBE_ESDP_SDP7_DIR	0x00008000 /* SDP7 IO direction */
+#define IXGBE_ESDP_SDP0_NATIVE	0x00010000 /* SDP0 IO mode */
+#define IXGBE_ESDP_SDP1_NATIVE	0x00020000 /* SDP1 IO mode */
+
+
+/* LEDCTL Bit Masks */
+#define IXGBE_LED_IVRT_BASE		0x00000040
+#define IXGBE_LED_BLINK_BASE		0x00000080
+#define IXGBE_LED_MODE_MASK_BASE	0x0000000F
+#define IXGBE_LED_OFFSET(_base, _i)	(_base << (8 * (_i)))
+#define IXGBE_LED_MODE_SHIFT(_i)	(8*(_i))
+#define IXGBE_LED_IVRT(_i)	IXGBE_LED_OFFSET(IXGBE_LED_IVRT_BASE, _i)
+#define IXGBE_LED_BLINK(_i)	IXGBE_LED_OFFSET(IXGBE_LED_BLINK_BASE, _i)
+#define IXGBE_LED_MODE_MASK(_i)	IXGBE_LED_OFFSET(IXGBE_LED_MODE_MASK_BASE, _i)
+#define IXGBE_X557_LED_MANUAL_SET_MASK	(1 << 8)
+#define IXGBE_X557_MAX_LED_INDEX	3
+#define IXGBE_X557_LED_PROVISIONING	0xC430
+
+/* LED modes */
+#define IXGBE_LED_LINK_UP	0x0
+#define IXGBE_LED_LINK_10G	0x1
+#define IXGBE_LED_MAC		0x2
+#define IXGBE_LED_FILTER	0x3
+#define IXGBE_LED_LINK_ACTIVE	0x4
+#define IXGBE_LED_LINK_1G	0x5
+#define IXGBE_LED_ON		0xE
+#define IXGBE_LED_OFF		0xF
+
+/* AUTOC Bit Masks */
+#define IXGBE_AUTOC_KX4_KX_SUPP_MASK 0xC0000000
+#define IXGBE_AUTOC_KX4_SUPP	0x80000000
+#define IXGBE_AUTOC_KX_SUPP	0x40000000
+#define IXGBE_AUTOC_PAUSE	0x30000000
+#define IXGBE_AUTOC_ASM_PAUSE	0x20000000
+#define IXGBE_AUTOC_SYM_PAUSE	0x10000000
+#define IXGBE_AUTOC_RF		0x08000000
+#define IXGBE_AUTOC_PD_TMR	0x06000000
+#define IXGBE_AUTOC_AN_RX_LOOSE	0x01000000
+#define IXGBE_AUTOC_AN_RX_DRIFT	0x00800000
+#define IXGBE_AUTOC_AN_RX_ALIGN	0x007C0000
+#define IXGBE_AUTOC_FECA	0x00040000
+#define IXGBE_AUTOC_FECR	0x00020000
+#define IXGBE_AUTOC_KR_SUPP	0x00010000
+#define IXGBE_AUTOC_AN_RESTART	0x00001000
+#define IXGBE_AUTOC_FLU		0x00000001
+#define IXGBE_AUTOC_LMS_SHIFT	13
+#define IXGBE_AUTOC_LMS_10G_SERIAL	(0x3 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_KX4_KX_KR	(0x4 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_SGMII_1G_100M	(0x5 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN	(0x6 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII	(0x7 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_MASK		(0x7 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_1G_LINK_NO_AN	(0x0 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_10G_LINK_NO_AN	(0x1 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_1G_AN		(0x2 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_KX4_AN		(0x4 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_KX4_AN_1G_AN	(0x6 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_ATTACH_TYPE	(0x7 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT)
+
+#define IXGBE_AUTOC_1G_PMA_PMD_MASK	0x00000200
+#define IXGBE_AUTOC_1G_PMA_PMD_SHIFT	9
+#define IXGBE_AUTOC_10G_PMA_PMD_MASK	0x00000180
+#define IXGBE_AUTOC_10G_PMA_PMD_SHIFT	7
+#define IXGBE_AUTOC_10G_XAUI	(0x0 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT)
+#define IXGBE_AUTOC_10G_KX4	(0x1 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT)
+#define IXGBE_AUTOC_10G_CX4	(0x2 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT)
+#define IXGBE_AUTOC_1G_BX	(0x0 << IXGBE_AUTOC_1G_PMA_PMD_SHIFT)
+#define IXGBE_AUTOC_1G_KX	(0x1 << IXGBE_AUTOC_1G_PMA_PMD_SHIFT)
+#define IXGBE_AUTOC_1G_SFI	(0x0 << IXGBE_AUTOC_1G_PMA_PMD_SHIFT)
+#define IXGBE_AUTOC_1G_KX_BX	(0x1 << IXGBE_AUTOC_1G_PMA_PMD_SHIFT)
+
+#define IXGBE_AUTOC2_UPPER_MASK	0xFFFF0000
+#define IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK	0x00030000
+#define IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT	16
+#define IXGBE_AUTOC2_10G_KR	(0x0 << IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT)
+#define IXGBE_AUTOC2_10G_XFI	(0x1 << IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT)
+#define IXGBE_AUTOC2_10G_SFI	(0x2 << IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT)
+#define IXGBE_AUTOC2_LINK_DISABLE_ON_D3_MASK	0x50000000
+#define IXGBE_AUTOC2_LINK_DISABLE_MASK		0x70000000
+
+#define IXGBE_MACC_FLU		0x00000001
+#define IXGBE_MACC_FSV_10G	0x00030000
+#define IXGBE_MACC_FS		0x00040000
+#define IXGBE_MAC_RX2TX_LPBK	0x00000002
+
+/* Veto Bit definiton */
+#define IXGBE_MMNGC_MNG_VETO	0x00000001
+
+/* LINKS Bit Masks */
+#define IXGBE_LINKS_KX_AN_COMP	0x80000000
+#define IXGBE_LINKS_UP		0x40000000
+#define IXGBE_LINKS_SPEED	0x20000000
+#define IXGBE_LINKS_MODE	0x18000000
+#define IXGBE_LINKS_RX_MODE	0x06000000
+#define IXGBE_LINKS_TX_MODE	0x01800000
+#define IXGBE_LINKS_XGXS_EN	0x00400000
+#define IXGBE_LINKS_SGMII_EN	0x02000000
+#define IXGBE_LINKS_PCS_1G_EN	0x00200000
+#define IXGBE_LINKS_1G_AN_EN	0x00100000
+#define IXGBE_LINKS_KX_AN_IDLE	0x00080000
+#define IXGBE_LINKS_1G_SYNC	0x00040000
+#define IXGBE_LINKS_10G_ALIGN	0x00020000
+#define IXGBE_LINKS_10G_LANE_SYNC	0x00017000
+#define IXGBE_LINKS_TL_FAULT		0x00001000
+#define IXGBE_LINKS_SIGNAL		0x00000F00
+
+#define IXGBE_LINKS_SPEED_NON_STD	0x08000000
+#define IXGBE_LINKS_SPEED_82599		0x30000000
+#define IXGBE_LINKS_SPEED_10G_82599	0x30000000
+#define IXGBE_LINKS_SPEED_1G_82599	0x20000000
+#define IXGBE_LINKS_SPEED_100_82599	0x10000000
+#define IXGBE_LINK_UP_TIME		90 /* 9.0 Seconds */
+#define IXGBE_AUTO_NEG_TIME		45 /* 4.5 Seconds */
+
+#define IXGBE_LINKS2_AN_SUPPORTED	0x00000040
+
+/* PCS1GLSTA Bit Masks */
+#define IXGBE_PCS1GLSTA_LINK_OK		1
+#define IXGBE_PCS1GLSTA_SYNK_OK		0x10
+#define IXGBE_PCS1GLSTA_AN_COMPLETE	0x10000
+#define IXGBE_PCS1GLSTA_AN_PAGE_RX	0x20000
+#define IXGBE_PCS1GLSTA_AN_TIMED_OUT	0x40000
+#define IXGBE_PCS1GLSTA_AN_REMOTE_FAULT	0x80000
+#define IXGBE_PCS1GLSTA_AN_ERROR_RWS	0x100000
+
+#define IXGBE_PCS1GANA_SYM_PAUSE	0x80
+#define IXGBE_PCS1GANA_ASM_PAUSE	0x100
+
+/* PCS1GLCTL Bit Masks */
+#define IXGBE_PCS1GLCTL_AN_1G_TIMEOUT_EN 0x00040000 /* PCS 1G autoneg to en */
+#define IXGBE_PCS1GLCTL_FLV_LINK_UP	1
+#define IXGBE_PCS1GLCTL_FORCE_LINK	0x20
+#define IXGBE_PCS1GLCTL_LOW_LINK_LATCH	0x40
+#define IXGBE_PCS1GLCTL_AN_ENABLE	0x10000
+#define IXGBE_PCS1GLCTL_AN_RESTART	0x20000
+
+/* ANLP1 Bit Masks */
+#define IXGBE_ANLP1_PAUSE		0x0C00
+#define IXGBE_ANLP1_SYM_PAUSE		0x0400
+#define IXGBE_ANLP1_ASM_PAUSE		0x0800
+#define IXGBE_ANLP1_AN_STATE_MASK	0x000f0000
+
+/* SW Semaphore Register bitmasks */
+#define IXGBE_SWSM_SMBI		0x00000001 /* Driver Semaphore bit */
+#define IXGBE_SWSM_SWESMBI	0x00000002 /* FW Semaphore bit */
+#define IXGBE_SWSM_WMNG		0x00000004 /* Wake MNG Clock */
+#define IXGBE_SWFW_REGSMP	0x80000000 /* Register Semaphore bit 31 */
+
+/* SW_FW_SYNC/GSSR definitions */
+#define IXGBE_GSSR_EEP_SM		0x0001
+#define IXGBE_GSSR_PHY0_SM		0x0002
+#define IXGBE_GSSR_PHY1_SM		0x0004
+#define IXGBE_GSSR_MAC_CSR_SM		0x0008
+#define IXGBE_GSSR_FLASH_SM		0x0010
+#define IXGBE_GSSR_NVM_UPDATE_SM	0x0200
+#define IXGBE_GSSR_SW_MNG_SM		0x0400
+#define IXGBE_GSSR_TOKEN_SM	0x40000000 /* SW bit for shared access */
+#define IXGBE_GSSR_SHARED_I2C_SM 0x1806 /* Wait for both phys and both I2Cs */
+#define IXGBE_GSSR_I2C_MASK	0x1800
+#define IXGBE_GSSR_NVM_PHY_MASK	0xF
+
+/* FW Status register bitmask */
+#define IXGBE_FWSTS_FWRI	0x00000200 /* Firmware Reset Indication */
+
+/* EEC Register */
+#define IXGBE_EEC_SK		0x00000001 /* EEPROM Clock */
+#define IXGBE_EEC_CS		0x00000002 /* EEPROM Chip Select */
+#define IXGBE_EEC_DI		0x00000004 /* EEPROM Data In */
+#define IXGBE_EEC_DO		0x00000008 /* EEPROM Data Out */
+#define IXGBE_EEC_FWE_MASK	0x00000030 /* FLASH Write Enable */
+#define IXGBE_EEC_FWE_DIS	0x00000010 /* Disable FLASH writes */
+#define IXGBE_EEC_FWE_EN	0x00000020 /* Enable FLASH writes */
+#define IXGBE_EEC_FWE_SHIFT	4
+#define IXGBE_EEC_REQ		0x00000040 /* EEPROM Access Request */
+#define IXGBE_EEC_GNT		0x00000080 /* EEPROM Access Grant */
+#define IXGBE_EEC_PRES		0x00000100 /* EEPROM Present */
+#define IXGBE_EEC_ARD		0x00000200 /* EEPROM Auto Read Done */
+#define IXGBE_EEC_FLUP		0x00800000 /* Flash update command */
+#define IXGBE_EEC_SEC1VAL	0x02000000 /* Sector 1 Valid */
+#define IXGBE_EEC_FLUDONE	0x04000000 /* Flash update done */
+/* EEPROM Addressing bits based on type (0-small, 1-large) */
+#define IXGBE_EEC_ADDR_SIZE	0x00000400
+#define IXGBE_EEC_SIZE		0x00007800 /* EEPROM Size */
+#define IXGBE_EERD_MAX_ADDR	0x00003FFF /* EERD alows 14 bits for addr. */
+
+#define IXGBE_EEC_SIZE_SHIFT		11
+#define IXGBE_EEPROM_WORD_SIZE_SHIFT	6
+#define IXGBE_EEPROM_OPCODE_BITS	8
+
+/* FLA Register */
+#define IXGBE_FLA_LOCKED	0x00000040
+
+/* Part Number String Length */
+#define IXGBE_PBANUM_LENGTH	11
+
+/* Checksum and EEPROM pointers */
+#define IXGBE_PBANUM_PTR_GUARD		0xFAFA
+#define IXGBE_EEPROM_CHECKSUM		0x3F
+#define IXGBE_EEPROM_SUM		0xBABA
+#define IXGBE_PCIE_ANALOG_PTR		0x03
+#define IXGBE_ATLAS0_CONFIG_PTR		0x04
+#define IXGBE_PHY_PTR			0x04
+#define IXGBE_ATLAS1_CONFIG_PTR		0x05
+#define IXGBE_OPTION_ROM_PTR		0x05
+#define IXGBE_PCIE_GENERAL_PTR		0x06
+#define IXGBE_PCIE_CONFIG0_PTR		0x07
+#define IXGBE_PCIE_CONFIG1_PTR		0x08
+#define IXGBE_CORE0_PTR			0x09
+#define IXGBE_CORE1_PTR			0x0A
+#define IXGBE_MAC0_PTR			0x0B
+#define IXGBE_MAC1_PTR			0x0C
+#define IXGBE_CSR0_CONFIG_PTR		0x0D
+#define IXGBE_CSR1_CONFIG_PTR		0x0E
+#define IXGBE_PCIE_ANALOG_PTR_X550	0x02
+#define IXGBE_SHADOW_RAM_SIZE_X550	0x4000
+#define IXGBE_IXGBE_PCIE_GENERAL_SIZE	0x24
+#define IXGBE_PCIE_CONFIG_SIZE		0x08
+#define IXGBE_EEPROM_LAST_WORD		0x41
+#define IXGBE_FW_PTR			0x0F
+#define IXGBE_PBANUM0_PTR		0x15
+#define IXGBE_PBANUM1_PTR		0x16
+#define IXGBE_ALT_MAC_ADDR_PTR		0x37
+#define IXGBE_FREE_SPACE_PTR		0X3E
+
+/* External Thermal Sensor Config */
+#define IXGBE_ETS_CFG			0x26
+#define IXGBE_ETS_LTHRES_DELTA_MASK	0x07C0
+#define IXGBE_ETS_LTHRES_DELTA_SHIFT	6
+#define IXGBE_ETS_TYPE_MASK		0x0038
+#define IXGBE_ETS_TYPE_SHIFT		3
+#define IXGBE_ETS_TYPE_EMC		0x000
+#define IXGBE_ETS_NUM_SENSORS_MASK	0x0007
+#define IXGBE_ETS_DATA_LOC_MASK		0x3C00
+#define IXGBE_ETS_DATA_LOC_SHIFT	10
+#define IXGBE_ETS_DATA_INDEX_MASK	0x0300
+#define IXGBE_ETS_DATA_INDEX_SHIFT	8
+#define IXGBE_ETS_DATA_HTHRESH_MASK	0x00FF
+
+#define IXGBE_SAN_MAC_ADDR_PTR		0x28
+#define IXGBE_DEVICE_CAPS		0x2C
+#define IXGBE_SERIAL_NUMBER_MAC_ADDR	0x11
+#define IXGBE_PCIE_MSIX_82599_CAPS	0x72
+#define IXGBE_MAX_MSIX_VECTORS_82599	0x40
+#define IXGBE_PCIE_MSIX_82598_CAPS	0x62
+#define IXGBE_MAX_MSIX_VECTORS_82598	0x13
+
+/* MSI-X capability fields masks */
+#define IXGBE_PCIE_MSIX_TBL_SZ_MASK	0x7FF
+
+/* Legacy EEPROM word offsets */
+#define IXGBE_ISCSI_BOOT_CAPS		0x0033
+#define IXGBE_ISCSI_SETUP_PORT_0	0x0030
+#define IXGBE_ISCSI_SETUP_PORT_1	0x0034
+
+/* EEPROM Commands - SPI */
+#define IXGBE_EEPROM_MAX_RETRY_SPI	5000 /* Max wait 5ms for RDY signal */
+#define IXGBE_EEPROM_STATUS_RDY_SPI	0x01
+#define IXGBE_EEPROM_READ_OPCODE_SPI	0x03  /* EEPROM read opcode */
+#define IXGBE_EEPROM_WRITE_OPCODE_SPI	0x02  /* EEPROM write opcode */
+#define IXGBE_EEPROM_A8_OPCODE_SPI	0x08  /* opcode bit-3 = addr bit-8 */
+#define IXGBE_EEPROM_WREN_OPCODE_SPI	0x06  /* EEPROM set Write Ena latch */
+/* EEPROM reset Write Enable latch */
+#define IXGBE_EEPROM_WRDI_OPCODE_SPI	0x04
+#define IXGBE_EEPROM_RDSR_OPCODE_SPI	0x05  /* EEPROM read Status reg */
+#define IXGBE_EEPROM_WRSR_OPCODE_SPI	0x01  /* EEPROM write Status reg */
+#define IXGBE_EEPROM_ERASE4K_OPCODE_SPI	0x20  /* EEPROM ERASE 4KB */
+#define IXGBE_EEPROM_ERASE64K_OPCODE_SPI	0xD8  /* EEPROM ERASE 64KB */
+#define IXGBE_EEPROM_ERASE256_OPCODE_SPI	0xDB  /* EEPROM ERASE 256B */
+
+/* EEPROM Read Register */
+#define IXGBE_EEPROM_RW_REG_DATA	16 /* data offset in EEPROM read reg */
+#define IXGBE_EEPROM_RW_REG_DONE	2 /* Offset to READ done bit */
+#define IXGBE_EEPROM_RW_REG_START	1 /* First bit to start operation */
+#define IXGBE_EEPROM_RW_ADDR_SHIFT	2 /* Shift to the address bits */
+#define IXGBE_NVM_POLL_WRITE		1 /* Flag for polling for wr complete */
+#define IXGBE_NVM_POLL_READ		0 /* Flag for polling for rd complete */
+
+#define NVM_INIT_CTRL_3		0x38
+#define NVM_INIT_CTRL_3_LPLU	0x8
+#define NVM_INIT_CTRL_3_D10GMP_PORT0 0x40
+#define NVM_INIT_CTRL_3_D10GMP_PORT1 0x100
+
+#define IXGBE_ETH_LENGTH_OF_ADDRESS	6
+
+#define IXGBE_EEPROM_PAGE_SIZE_MAX	128
+#define IXGBE_EEPROM_RD_BUFFER_MAX_COUNT	256 /* words rd in burst */
+#define IXGBE_EEPROM_WR_BUFFER_MAX_COUNT	256 /* words wr in burst */
+#define IXGBE_EEPROM_CTRL_2		1 /* EEPROM CTRL word 2 */
+#define IXGBE_EEPROM_CCD_BIT		2
+
+#ifndef IXGBE_EEPROM_GRANT_ATTEMPTS
+#define IXGBE_EEPROM_GRANT_ATTEMPTS	1000 /* EEPROM attempts to gain grant */
+#endif
+
+/* Number of 5 microseconds we wait for EERD read and
+ * EERW write to complete */
+#define IXGBE_EERD_EEWR_ATTEMPTS	100000
+
+/* # attempts we wait for flush update to complete */
+#define IXGBE_FLUDONE_ATTEMPTS		20000
+
+#define IXGBE_PCIE_CTRL2		0x5   /* PCIe Control 2 Offset */
+#define IXGBE_PCIE_CTRL2_DUMMY_ENABLE	0x8   /* Dummy Function Enable */
+#define IXGBE_PCIE_CTRL2_LAN_DISABLE	0x2   /* LAN PCI Disable */
+#define IXGBE_PCIE_CTRL2_DISABLE_SELECT	0x1   /* LAN Disable Select */
+
+#define IXGBE_SAN_MAC_ADDR_PORT0_OFFSET		0x0
+#define IXGBE_SAN_MAC_ADDR_PORT1_OFFSET		0x3
+#define IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP		0x1
+#define IXGBE_DEVICE_CAPS_FCOE_OFFLOADS		0x2
+#define IXGBE_FW_LESM_PARAMETERS_PTR		0x2
+#define IXGBE_FW_LESM_STATE_1			0x1
+#define IXGBE_FW_LESM_STATE_ENABLED		0x8000 /* LESM Enable bit */
+#define IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR	0x4
+#define IXGBE_FW_PATCH_VERSION_4		0x7
+#define IXGBE_FCOE_IBA_CAPS_BLK_PTR		0x33 /* iSCSI/FCOE block */
+#define IXGBE_FCOE_IBA_CAPS_FCOE		0x20 /* FCOE flags */
+#define IXGBE_ISCSI_FCOE_BLK_PTR		0x17 /* iSCSI/FCOE block */
+#define IXGBE_ISCSI_FCOE_FLAGS_OFFSET		0x0 /* FCOE flags */
+#define IXGBE_ISCSI_FCOE_FLAGS_ENABLE		0x1 /* FCOE flags enable bit */
+#define IXGBE_ALT_SAN_MAC_ADDR_BLK_PTR		0x27 /* Alt. SAN MAC block */
+#define IXGBE_ALT_SAN_MAC_ADDR_CAPS_OFFSET	0x0 /* Alt SAN MAC capability */
+#define IXGBE_ALT_SAN_MAC_ADDR_PORT0_OFFSET	0x1 /* Alt SAN MAC 0 offset */
+#define IXGBE_ALT_SAN_MAC_ADDR_PORT1_OFFSET	0x4 /* Alt SAN MAC 1 offset */
+#define IXGBE_ALT_SAN_MAC_ADDR_WWNN_OFFSET	0x7 /* Alt WWNN prefix offset */
+#define IXGBE_ALT_SAN_MAC_ADDR_WWPN_OFFSET	0x8 /* Alt WWPN prefix offset */
+#define IXGBE_ALT_SAN_MAC_ADDR_CAPS_SANMAC	0x0 /* Alt SAN MAC exists */
+#define IXGBE_ALT_SAN_MAC_ADDR_CAPS_ALTWWN	0x1 /* Alt WWN base exists */
+
+/* FW header offset */
+#define IXGBE_X540_FW_PASSTHROUGH_PATCH_CONFIG_PTR	0x4
+#define IXGBE_X540_FW_MODULE_MASK			0x7FFF
+/* 4KB multiplier */
+#define IXGBE_X540_FW_MODULE_LENGTH			0x1000
+/* version word 2 (month & day) */
+#define IXGBE_X540_FW_PATCH_VERSION_2		0x5
+/* version word 3 (silicon compatibility & year) */
+#define IXGBE_X540_FW_PATCH_VERSION_3		0x6
+/* version word 4 (major & minor numbers) */
+#define IXGBE_X540_FW_PATCH_VERSION_4		0x7
+
+#define IXGBE_DEVICE_CAPS_WOL_PORT0_1	0x4 /* WoL supported on ports 0 & 1 */
+#define IXGBE_DEVICE_CAPS_WOL_PORT0	0x8 /* WoL supported on port 0 */
+#define IXGBE_DEVICE_CAPS_WOL_MASK	0xC /* Mask for WoL capabilities */
+
+/* PCI Bus Info */
+#define IXGBE_PCI_DEVICE_STATUS		0xAA
+#define IXGBE_PCI_DEVICE_STATUS_TRANSACTION_PENDING	0x0020
+#define IXGBE_PCI_LINK_STATUS		0xB2
+#define IXGBE_PCI_DEVICE_CONTROL2	0xC8
+#define IXGBE_PCI_LINK_WIDTH		0x3F0
+#define IXGBE_PCI_LINK_WIDTH_1		0x10
+#define IXGBE_PCI_LINK_WIDTH_2		0x20
+#define IXGBE_PCI_LINK_WIDTH_4		0x40
+#define IXGBE_PCI_LINK_WIDTH_8		0x80
+#define IXGBE_PCI_LINK_SPEED		0xF
+#define IXGBE_PCI_LINK_SPEED_2500	0x1
+#define IXGBE_PCI_LINK_SPEED_5000	0x2
+#define IXGBE_PCI_LINK_SPEED_8000	0x3
+#define IXGBE_PCI_HEADER_TYPE_REGISTER	0x0E
+#define IXGBE_PCI_HEADER_TYPE_MULTIFUNC	0x80
+#define IXGBE_PCI_DEVICE_CONTROL2_16ms	0x0005
+
+#define IXGBE_PCIDEVCTRL2_TIMEO_MASK	0xf
+#define IXGBE_PCIDEVCTRL2_16_32ms_def	0x0
+#define IXGBE_PCIDEVCTRL2_50_100us	0x1
+#define IXGBE_PCIDEVCTRL2_1_2ms		0x2
+#define IXGBE_PCIDEVCTRL2_16_32ms	0x5
+#define IXGBE_PCIDEVCTRL2_65_130ms	0x6
+#define IXGBE_PCIDEVCTRL2_260_520ms	0x9
+#define IXGBE_PCIDEVCTRL2_1_2s		0xa
+#define IXGBE_PCIDEVCTRL2_4_8s		0xd
+#define IXGBE_PCIDEVCTRL2_17_34s	0xe
+
+/* Number of 100 microseconds we wait for PCI Express master disable */
+#define IXGBE_PCI_MASTER_DISABLE_TIMEOUT	800
+
+/* Check whether address is multicast. This is little-endian specific check.*/
+#define IXGBE_IS_MULTICAST(Address) \
+		(bool)(((u8 *)(Address))[0] & ((u8)0x01))
+
+/* Check whether an address is broadcast. */
+#define IXGBE_IS_BROADCAST(Address) \
+		((((u8 *)(Address))[0] == ((u8)0xff)) && \
+		(((u8 *)(Address))[1] == ((u8)0xff)))
+
+/* RAH */
+#define IXGBE_RAH_VIND_MASK	0x003C0000
+#define IXGBE_RAH_VIND_SHIFT	18
+#define IXGBE_RAH_AV		0x80000000
+#define IXGBE_CLEAR_VMDQ_ALL	0xFFFFFFFF
+
+/* Header split receive */
+#define IXGBE_RFCTL_ISCSI_DIS		0x00000001
+#define IXGBE_RFCTL_ISCSI_DWC_MASK	0x0000003E
+#define IXGBE_RFCTL_ISCSI_DWC_SHIFT	1
+#define IXGBE_RFCTL_RSC_DIS		0x00000020
+#define IXGBE_RFCTL_NFSW_DIS		0x00000040
+#define IXGBE_RFCTL_NFSR_DIS		0x00000080
+#define IXGBE_RFCTL_NFS_VER_MASK	0x00000300
+#define IXGBE_RFCTL_NFS_VER_SHIFT	8
+#define IXGBE_RFCTL_NFS_VER_2		0
+#define IXGBE_RFCTL_NFS_VER_3		1
+#define IXGBE_RFCTL_NFS_VER_4		2
+#define IXGBE_RFCTL_IPV6_DIS		0x00000400
+#define IXGBE_RFCTL_IPV6_XSUM_DIS	0x00000800
+#define IXGBE_RFCTL_IPFRSP_DIS		0x00004000
+#define IXGBE_RFCTL_IPV6_EX_DIS		0x00010000
+#define IXGBE_RFCTL_NEW_IPV6_EXT_DIS	0x00020000
+
+/* Transmit Config masks */
+#define IXGBE_TXDCTL_ENABLE		0x02000000 /* Ena specific Tx Queue */
+#define IXGBE_TXDCTL_SWFLSH		0x04000000 /* Tx Desc. wr-bk flushing */
+#define IXGBE_TXDCTL_WTHRESH_SHIFT	16 /* shift to WTHRESH bits */
+/* Enable short packet padding to 64 bytes */
+#define IXGBE_TX_PAD_ENABLE		0x00000400
+#define IXGBE_JUMBO_FRAME_ENABLE	0x00000004  /* Allow jumbo frames */
+/* This allows for 16K packets + 4k for vlan */
+#define IXGBE_MAX_FRAME_SZ		0x40040000
+
+#define IXGBE_TDWBAL_HEAD_WB_ENABLE	0x1 /* Tx head write-back enable */
+#define IXGBE_TDWBAL_SEQNUM_WB_ENABLE	0x2 /* Tx seq# write-back enable */
+
+/* Receive Config masks */
+#define IXGBE_RXCTRL_RXEN		0x00000001 /* Enable Receiver */
+#define IXGBE_RXCTRL_DMBYPS		0x00000002 /* Desc Monitor Bypass */
+#define IXGBE_RXDCTL_ENABLE		0x02000000 /* Ena specific Rx Queue */
+#define IXGBE_RXDCTL_SWFLSH		0x04000000 /* Rx Desc wr-bk flushing */
+#define IXGBE_RXDCTL_RLPMLMASK		0x00003FFF /* X540 supported only */
+#define IXGBE_RXDCTL_RLPML_EN		0x00008000
+#define IXGBE_RXDCTL_VME		0x40000000 /* VLAN mode enable */
+
+#define IXGBE_TSAUXC_EN_CLK		0x00000004
+#define IXGBE_TSAUXC_SYNCLK		0x00000008
+#define IXGBE_TSAUXC_SDP0_INT		0x00000040
+#define IXGBE_TSAUXC_EN_TT0		0x00000001
+#define IXGBE_TSAUXC_EN_TT1		0x00000002
+#define IXGBE_TSAUXC_ST0		0x00000010
+#define IXGBE_TSAUXC_DISABLE_SYSTIME	0x80000000
+
+#define IXGBE_TSSDP_TS_SDP0_SEL_MASK	0x000000C0
+#define IXGBE_TSSDP_TS_SDP0_CLK0	0x00000080
+#define IXGBE_TSSDP_TS_SDP0_EN		0x00000100
+
+#define IXGBE_TSYNCTXCTL_VALID		0x00000001 /* Tx timestamp valid */
+#define IXGBE_TSYNCTXCTL_ENABLED	0x00000010 /* Tx timestamping enabled */
+
+#define IXGBE_TSYNCRXCTL_VALID		0x00000001 /* Rx timestamp valid */
+#define IXGBE_TSYNCRXCTL_TYPE_MASK	0x0000000E /* Rx type mask */
+#define IXGBE_TSYNCRXCTL_TYPE_L2_V2	0x00
+#define IXGBE_TSYNCRXCTL_TYPE_L4_V1	0x02
+#define IXGBE_TSYNCRXCTL_TYPE_L2_L4_V2	0x04
+#define IXGBE_TSYNCRXCTL_TYPE_ALL	0x08
+#define IXGBE_TSYNCRXCTL_TYPE_EVENT_V2	0x0A
+#define IXGBE_TSYNCRXCTL_ENABLED	0x00000010 /* Rx Timestamping enabled */
+#define IXGBE_TSYNCRXCTL_TSIP_UT_EN	0x00800000 /* Rx Timestamp in Packet */
+#define IXGBE_TSYNCRXCTL_TSIP_UP_MASK	0xFF000000 /* Rx Timestamp UP Mask */
+
+#define IXGBE_TSIM_SYS_WRAP		0x00000001
+#define IXGBE_TSIM_TXTS			0x00000002
+#define IXGBE_TSIM_TADJ			0x00000080
+
+#define IXGBE_TSICR_SYS_WRAP		IXGBE_TSIM_SYS_WRAP
+#define IXGBE_TSICR_TXTS		IXGBE_TSIM_TXTS
+#define IXGBE_TSICR_TADJ		IXGBE_TSIM_TADJ
+
+#define IXGBE_RXMTRL_V1_CTRLT_MASK	0x000000FF
+#define IXGBE_RXMTRL_V1_SYNC_MSG	0x00
+#define IXGBE_RXMTRL_V1_DELAY_REQ_MSG	0x01
+#define IXGBE_RXMTRL_V1_FOLLOWUP_MSG	0x02
+#define IXGBE_RXMTRL_V1_DELAY_RESP_MSG	0x03
+#define IXGBE_RXMTRL_V1_MGMT_MSG	0x04
+
+#define IXGBE_RXMTRL_V2_MSGID_MASK	0x0000FF00
+#define IXGBE_RXMTRL_V2_SYNC_MSG	0x0000
+#define IXGBE_RXMTRL_V2_DELAY_REQ_MSG	0x0100
+#define IXGBE_RXMTRL_V2_PDELAY_REQ_MSG	0x0200
+#define IXGBE_RXMTRL_V2_PDELAY_RESP_MSG	0x0300
+#define IXGBE_RXMTRL_V2_FOLLOWUP_MSG	0x0800
+#define IXGBE_RXMTRL_V2_DELAY_RESP_MSG	0x0900
+#define IXGBE_RXMTRL_V2_PDELAY_FOLLOWUP_MSG 0x0A00
+#define IXGBE_RXMTRL_V2_ANNOUNCE_MSG	0x0B00
+#define IXGBE_RXMTRL_V2_SIGNALLING_MSG	0x0C00
+#define IXGBE_RXMTRL_V2_MGMT_MSG	0x0D00
+
+#define IXGBE_FCTRL_SBP		0x00000002 /* Store Bad Packet */
+#define IXGBE_FCTRL_MPE		0x00000100 /* Multicast Promiscuous Ena*/
+#define IXGBE_FCTRL_UPE		0x00000200 /* Unicast Promiscuous Ena */
+#define IXGBE_FCTRL_BAM		0x00000400 /* Broadcast Accept Mode */
+#define IXGBE_FCTRL_PMCF	0x00001000 /* Pass MAC Control Frames */
+#define IXGBE_FCTRL_DPF		0x00002000 /* Discard Pause Frame */
+/* Receive Priority Flow Control Enable */
+#define IXGBE_FCTRL_RPFCE	0x00004000
+#define IXGBE_FCTRL_RFCE	0x00008000 /* Receive Flow Control Ena */
+#define IXGBE_MFLCN_PMCF	0x00000001 /* Pass MAC Control Frames */
+#define IXGBE_MFLCN_DPF		0x00000002 /* Discard Pause Frame */
+#define IXGBE_MFLCN_RPFCE	0x00000004 /* Receive Priority FC Enable */
+#define IXGBE_MFLCN_RFCE	0x00000008 /* Receive FC Enable */
+#define IXGBE_MFLCN_RPFCE_MASK	0x00000FF4 /* Rx Priority FC bitmap mask */
+#define IXGBE_MFLCN_RPFCE_SHIFT	4 /* Rx Priority FC bitmap shift */
+
+/* Multiple Receive Queue Control */
+#define IXGBE_MRQC_RSSEN	0x00000001  /* RSS Enable */
+#define IXGBE_MRQC_MRQE_MASK	0xF /* Bits 3:0 */
+#define IXGBE_MRQC_RT8TCEN	0x00000002 /* 8 TC no RSS */
+#define IXGBE_MRQC_RT4TCEN	0x00000003 /* 4 TC no RSS */
+#define IXGBE_MRQC_RTRSS8TCEN	0x00000004 /* 8 TC w/ RSS */
+#define IXGBE_MRQC_RTRSS4TCEN	0x00000005 /* 4 TC w/ RSS */
+#define IXGBE_MRQC_VMDQEN	0x00000008 /* VMDq2 64 pools no RSS */
+#define IXGBE_MRQC_VMDQRSS32EN	0x0000000A /* VMDq2 32 pools w/ RSS */
+#define IXGBE_MRQC_VMDQRSS64EN	0x0000000B /* VMDq2 64 pools w/ RSS */
+#define IXGBE_MRQC_VMDQRT8TCEN	0x0000000C /* VMDq2/RT 16 pool 8 TC */
+#define IXGBE_MRQC_VMDQRT4TCEN	0x0000000D /* VMDq2/RT 32 pool 4 TC */
+#define IXGBE_MRQC_RSS_FIELD_MASK	0xFFFF0000
+#define IXGBE_MRQC_RSS_FIELD_IPV4_TCP	0x00010000
+#define IXGBE_MRQC_RSS_FIELD_IPV4	0x00020000
+#define IXGBE_MRQC_RSS_FIELD_IPV6_EX_TCP 0x00040000
+#define IXGBE_MRQC_RSS_FIELD_IPV6_EX	0x00080000
+#define IXGBE_MRQC_RSS_FIELD_IPV6	0x00100000
+#define IXGBE_MRQC_RSS_FIELD_IPV6_TCP	0x00200000
+#define IXGBE_MRQC_RSS_FIELD_IPV4_UDP	0x00400000
+#define IXGBE_MRQC_RSS_FIELD_IPV6_UDP	0x00800000
+#define IXGBE_MRQC_RSS_FIELD_IPV6_EX_UDP 0x01000000
+#define IXGBE_MRQC_MULTIPLE_RSS		0x00002000
+#define IXGBE_MRQC_L3L4TXSWEN		0x00008000
+
+/* Queue Drop Enable */
+#define IXGBE_QDE_ENABLE	0x00000001
+#define IXGBE_QDE_HIDE_VLAN	0x00000002
+#define IXGBE_QDE_IDX_MASK	0x00007F00
+#define IXGBE_QDE_IDX_SHIFT	8
+#define IXGBE_QDE_WRITE		0x00010000
+#define IXGBE_QDE_READ		0x00020000
+
+#define IXGBE_TXD_POPTS_IXSM	0x01 /* Insert IP checksum */
+#define IXGBE_TXD_POPTS_TXSM	0x02 /* Insert TCP/UDP checksum */
+#define IXGBE_TXD_CMD_EOP	0x01000000 /* End of Packet */
+#define IXGBE_TXD_CMD_IFCS	0x02000000 /* Insert FCS (Ethernet CRC) */
+#define IXGBE_TXD_CMD_IC	0x04000000 /* Insert Checksum */
+#define IXGBE_TXD_CMD_RS	0x08000000 /* Report Status */
+#define IXGBE_TXD_CMD_DEXT	0x20000000 /* Desc extension (0 = legacy) */
+#define IXGBE_TXD_CMD_VLE	0x40000000 /* Add VLAN tag */
+#define IXGBE_TXD_STAT_DD	0x00000001 /* Descriptor Done */
+
+#define IXGBE_RXDADV_IPSEC_STATUS_SECP		0x00020000
+#define IXGBE_RXDADV_IPSEC_ERROR_INVALID_PROTOCOL 0x08000000
+#define IXGBE_RXDADV_IPSEC_ERROR_INVALID_LENGTH	0x10000000
+#define IXGBE_RXDADV_IPSEC_ERROR_AUTH_FAILED	0x18000000
+#define IXGBE_RXDADV_IPSEC_ERROR_BIT_MASK	0x18000000
+/* Multiple Transmit Queue Command Register */
+#define IXGBE_MTQC_RT_ENA	0x1 /* DCB Enable */
+#define IXGBE_MTQC_VT_ENA	0x2 /* VMDQ2 Enable */
+#define IXGBE_MTQC_64Q_1PB	0x0 /* 64 queues 1 pack buffer */
+#define IXGBE_MTQC_32VF		0x8 /* 4 TX Queues per pool w/32VF's */
+#define IXGBE_MTQC_64VF		0x4 /* 2 TX Queues per pool w/64VF's */
+#define IXGBE_MTQC_4TC_4TQ	0x8 /* 4 TC if RT_ENA and VT_ENA */
+#define IXGBE_MTQC_8TC_8TQ	0xC /* 8 TC if RT_ENA or 8 TQ if VT_ENA */
+
+/* Receive Descriptor bit definitions */
+#define IXGBE_RXD_STAT_DD	0x01 /* Descriptor Done */
+#define IXGBE_RXD_STAT_EOP	0x02 /* End of Packet */
+#define IXGBE_RXD_STAT_FLM	0x04 /* FDir Match */
+#define IXGBE_RXD_STAT_VP	0x08 /* IEEE VLAN Packet */
+#define IXGBE_RXDADV_NEXTP_MASK	0x000FFFF0 /* Next Descriptor Index */
+#define IXGBE_RXDADV_NEXTP_SHIFT	0x00000004
+#define IXGBE_RXD_STAT_UDPCS	0x10 /* UDP xsum calculated */
+#define IXGBE_RXD_STAT_L4CS	0x20 /* L4 xsum calculated */
+#define IXGBE_RXD_STAT_IPCS	0x40 /* IP xsum calculated */
+#define IXGBE_RXD_STAT_PIF	0x80 /* passed in-exact filter */
+#define IXGBE_RXD_STAT_CRCV	0x100 /* Speculative CRC Valid */
+#define IXGBE_RXD_STAT_OUTERIPCS	0x100 /* Cloud IP xsum calculated */
+#define IXGBE_RXD_STAT_VEXT	0x200 /* 1st VLAN found */
+#define IXGBE_RXD_STAT_UDPV	0x400 /* Valid UDP checksum */
+#define IXGBE_RXD_STAT_DYNINT	0x800 /* Pkt caused INT via DYNINT */
+#define IXGBE_RXD_STAT_LLINT	0x800 /* Pkt caused Low Latency Interrupt */
+#define IXGBE_RXD_STAT_TSIP	0x08000 /* Time Stamp in packet buffer */
+#define IXGBE_RXD_STAT_TS	0x10000 /* Time Stamp */
+#define IXGBE_RXD_STAT_SECP	0x20000 /* Security Processing */
+#define IXGBE_RXD_STAT_LB	0x40000 /* Loopback Status */
+#define IXGBE_RXD_STAT_ACK	0x8000 /* ACK Packet indication */
+#define IXGBE_RXD_ERR_CE	0x01 /* CRC Error */
+#define IXGBE_RXD_ERR_LE	0x02 /* Length Error */
+#define IXGBE_RXD_ERR_PE	0x08 /* Packet Error */
+#define IXGBE_RXD_ERR_OSE	0x10 /* Oversize Error */
+#define IXGBE_RXD_ERR_USE	0x20 /* Undersize Error */
+#define IXGBE_RXD_ERR_TCPE	0x40 /* TCP/UDP Checksum Error */
+#define IXGBE_RXD_ERR_IPE	0x80 /* IP Checksum Error */
+#define IXGBE_RXDADV_ERR_MASK		0xfff00000 /* RDESC.ERRORS mask */
+#define IXGBE_RXDADV_ERR_SHIFT		20 /* RDESC.ERRORS shift */
+#define IXGBE_RXDADV_ERR_OUTERIPER	0x04000000 /* CRC IP Header error */
+#define IXGBE_RXDADV_ERR_RXE		0x20000000 /* Any MAC Error */
+#define IXGBE_RXDADV_ERR_FCEOFE		0x80000000 /* FCEOFe/IPE */
+#define IXGBE_RXDADV_ERR_FCERR		0x00700000 /* FCERR/FDIRERR */
+#define IXGBE_RXDADV_ERR_FDIR_LEN	0x00100000 /* FDIR Length error */
+#define IXGBE_RXDADV_ERR_FDIR_DROP	0x00200000 /* FDIR Drop error */
+#define IXGBE_RXDADV_ERR_FDIR_COLL	0x00400000 /* FDIR Collision error */
+#define IXGBE_RXDADV_ERR_HBO	0x00800000 /*Header Buffer Overflow */
+#define IXGBE_RXDADV_ERR_CE	0x01000000 /* CRC Error */
+#define IXGBE_RXDADV_ERR_LE	0x02000000 /* Length Error */
+#define IXGBE_RXDADV_ERR_PE	0x08000000 /* Packet Error */
+#define IXGBE_RXDADV_ERR_OSE	0x10000000 /* Oversize Error */
+#define IXGBE_RXDADV_ERR_USE	0x20000000 /* Undersize Error */
+#define IXGBE_RXDADV_ERR_TCPE	0x40000000 /* TCP/UDP Checksum Error */
+#define IXGBE_RXDADV_ERR_IPE	0x80000000 /* IP Checksum Error */
+#define IXGBE_RXD_VLAN_ID_MASK	0x0FFF  /* VLAN ID is in lower 12 bits */
+#define IXGBE_RXD_PRI_MASK	0xE000  /* Priority is in upper 3 bits */
+#define IXGBE_RXD_PRI_SHIFT	13
+#define IXGBE_RXD_CFI_MASK	0x1000  /* CFI is bit 12 */
+#define IXGBE_RXD_CFI_SHIFT	12
+
+#define IXGBE_RXDADV_STAT_DD		IXGBE_RXD_STAT_DD  /* Done */
+#define IXGBE_RXDADV_STAT_EOP		IXGBE_RXD_STAT_EOP /* End of Packet */
+#define IXGBE_RXDADV_STAT_FLM		IXGBE_RXD_STAT_FLM /* FDir Match */
+#define IXGBE_RXDADV_STAT_VP		IXGBE_RXD_STAT_VP  /* IEEE VLAN Pkt */
+#define IXGBE_RXDADV_STAT_MASK		0x000fffff /* Stat/NEXTP: bit 0-19 */
+#define IXGBE_RXDADV_STAT_FCEOFS	0x00000040 /* FCoE EOF/SOF Stat */
+#define IXGBE_RXDADV_STAT_FCSTAT	0x00000030 /* FCoE Pkt Stat */
+#define IXGBE_RXDADV_STAT_FCSTAT_NOMTCH	0x00000000 /* 00: No Ctxt Match */
+#define IXGBE_RXDADV_STAT_FCSTAT_NODDP	0x00000010 /* 01: Ctxt w/o DDP */
+#define IXGBE_RXDADV_STAT_FCSTAT_FCPRSP	0x00000020 /* 10: Recv. FCP_RSP */
+#define IXGBE_RXDADV_STAT_FCSTAT_DDP	0x00000030 /* 11: Ctxt w/ DDP */
+#define IXGBE_RXDADV_STAT_TS		0x00010000 /* IEEE1588 Time Stamp */
+#define IXGBE_RXDADV_STAT_TSIP		0x00008000 /* Time Stamp in packet buffer */
+
+/* PSRTYPE bit definitions */
+#define IXGBE_PSRTYPE_TCPHDR	0x00000010
+#define IXGBE_PSRTYPE_UDPHDR	0x00000020
+#define IXGBE_PSRTYPE_IPV4HDR	0x00000100
+#define IXGBE_PSRTYPE_IPV6HDR	0x00000200
+#define IXGBE_PSRTYPE_L2HDR	0x00001000
+
+/* SRRCTL bit definitions */
+#define IXGBE_SRRCTL_BSIZEPKT_SHIFT	10 /* so many KBs */
+#define IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT	2 /* 64byte resolution (>> 6)
+					   * + at bit 8 offset (<< 8)
+					   *  = (<< 2)
+					   */
+#define IXGBE_SRRCTL_RDMTS_SHIFT	22
+#define IXGBE_SRRCTL_RDMTS_MASK		0x01C00000
+#define IXGBE_SRRCTL_DROP_EN		0x10000000
+#define IXGBE_SRRCTL_BSIZEPKT_MASK	0x0000007F
+#define IXGBE_SRRCTL_BSIZEHDR_MASK	0x00003F00
+#define IXGBE_SRRCTL_DESCTYPE_LEGACY	0x00000000
+#define IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF 0x02000000
+#define IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT	0x04000000
+#define IXGBE_SRRCTL_DESCTYPE_HDR_REPLICATION_LARGE_PKT 0x08000000
+#define IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS 0x0A000000
+#define IXGBE_SRRCTL_DESCTYPE_MASK	0x0E000000
+
+#define IXGBE_RXDPS_HDRSTAT_HDRSP	0x00008000
+#define IXGBE_RXDPS_HDRSTAT_HDRLEN_MASK	0x000003FF
+
+#define IXGBE_RXDADV_RSSTYPE_MASK	0x0000000F
+#define IXGBE_RXDADV_PKTTYPE_MASK	0x0000FFF0
+#define IXGBE_RXDADV_PKTTYPE_MASK_EX	0x0001FFF0
+#define IXGBE_RXDADV_HDRBUFLEN_MASK	0x00007FE0
+#define IXGBE_RXDADV_RSCCNT_MASK	0x001E0000
+#define IXGBE_RXDADV_RSCCNT_SHIFT	17
+#define IXGBE_RXDADV_HDRBUFLEN_SHIFT	5
+#define IXGBE_RXDADV_SPLITHEADER_EN	0x00001000
+#define IXGBE_RXDADV_SPH		0x8000
+
+/* RSS Hash results */
+#define IXGBE_RXDADV_RSSTYPE_NONE	0x00000000
+#define IXGBE_RXDADV_RSSTYPE_IPV4_TCP	0x00000001
+#define IXGBE_RXDADV_RSSTYPE_IPV4	0x00000002
+#define IXGBE_RXDADV_RSSTYPE_IPV6_TCP	0x00000003
+#define IXGBE_RXDADV_RSSTYPE_IPV6_EX	0x00000004
+#define IXGBE_RXDADV_RSSTYPE_IPV6	0x00000005
+#define IXGBE_RXDADV_RSSTYPE_IPV6_TCP_EX 0x00000006
+#define IXGBE_RXDADV_RSSTYPE_IPV4_UDP	0x00000007
+#define IXGBE_RXDADV_RSSTYPE_IPV6_UDP	0x00000008
+#define IXGBE_RXDADV_RSSTYPE_IPV6_UDP_EX 0x00000009
+
+/* RSS Packet Types as indicated in the receive descriptor. */
+#define IXGBE_RXDADV_PKTTYPE_NONE	0x00000000
+#define IXGBE_RXDADV_PKTTYPE_IPV4	0x00000010 /* IPv4 hdr present */
+#define IXGBE_RXDADV_PKTTYPE_IPV4_EX	0x00000020 /* IPv4 hdr + extensions */
+#define IXGBE_RXDADV_PKTTYPE_IPV6	0x00000040 /* IPv6 hdr present */
+#define IXGBE_RXDADV_PKTTYPE_IPV6_EX	0x00000080 /* IPv6 hdr + extensions */
+#define IXGBE_RXDADV_PKTTYPE_TCP	0x00000100 /* TCP hdr present */
+#define IXGBE_RXDADV_PKTTYPE_UDP	0x00000200 /* UDP hdr present */
+#define IXGBE_RXDADV_PKTTYPE_SCTP	0x00000400 /* SCTP hdr present */
+#define IXGBE_RXDADV_PKTTYPE_NFS	0x00000800 /* NFS hdr present */
+#define IXGBE_RXDADV_PKTTYPE_VXLAN	0x00000800 /* VXLAN hdr present */
+#define IXGBE_RXDADV_PKTTYPE_TUNNEL	0x00010000 /* Tunnel type */
+#define IXGBE_RXDADV_PKTTYPE_IPSEC_ESP	0x00001000 /* IPSec ESP */
+#define IXGBE_RXDADV_PKTTYPE_IPSEC_AH	0x00002000 /* IPSec AH */
+#define IXGBE_RXDADV_PKTTYPE_LINKSEC	0x00004000 /* LinkSec Encap */
+#define IXGBE_RXDADV_PKTTYPE_ETQF	0x00008000 /* PKTTYPE is ETQF index */
+#define IXGBE_RXDADV_PKTTYPE_ETQF_MASK	0x00000070 /* ETQF has 8 indices */
+#define IXGBE_RXDADV_PKTTYPE_ETQF_SHIFT	4 /* Right-shift 4 bits */
+
+/* Security Processing bit Indication */
+#define IXGBE_RXDADV_LNKSEC_STATUS_SECP		0x00020000
+#define IXGBE_RXDADV_LNKSEC_ERROR_NO_SA_MATCH	0x08000000
+#define IXGBE_RXDADV_LNKSEC_ERROR_REPLAY_ERROR	0x10000000
+#define IXGBE_RXDADV_LNKSEC_ERROR_BIT_MASK	0x18000000
+#define IXGBE_RXDADV_LNKSEC_ERROR_BAD_SIG	0x18000000
+
+/* Masks to determine if packets should be dropped due to frame errors */
+#define IXGBE_RXD_ERR_FRAME_ERR_MASK ( \
+				IXGBE_RXD_ERR_CE | \
+				IXGBE_RXD_ERR_LE | \
+				IXGBE_RXD_ERR_PE | \
+				IXGBE_RXD_ERR_OSE | \
+				IXGBE_RXD_ERR_USE)
+
+#define IXGBE_RXDADV_ERR_FRAME_ERR_MASK ( \
+				IXGBE_RXDADV_ERR_CE | \
+				IXGBE_RXDADV_ERR_LE | \
+				IXGBE_RXDADV_ERR_PE | \
+				IXGBE_RXDADV_ERR_OSE | \
+				IXGBE_RXDADV_ERR_USE)
+
+#define IXGBE_RXDADV_ERR_FRAME_ERR_MASK_82599	IXGBE_RXDADV_ERR_RXE
+
+/* Multicast bit mask */
+#define IXGBE_MCSTCTRL_MFE	0x4
+
+/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
+#define IXGBE_REQ_TX_DESCRIPTOR_MULTIPLE	8
+#define IXGBE_REQ_RX_DESCRIPTOR_MULTIPLE	8
+#define IXGBE_REQ_TX_BUFFER_GRANULARITY		1024
+
+/* Vlan-specific macros */
+#define IXGBE_RX_DESC_SPECIAL_VLAN_MASK	0x0FFF /* VLAN ID in lower 12 bits */
+#define IXGBE_RX_DESC_SPECIAL_PRI_MASK	0xE000 /* Priority in upper 3 bits */
+#define IXGBE_RX_DESC_SPECIAL_PRI_SHIFT	0x000D /* Priority in upper 3 of 16 */
+#define IXGBE_TX_DESC_SPECIAL_PRI_SHIFT	IXGBE_RX_DESC_SPECIAL_PRI_SHIFT
+
+/* SR-IOV specific macros */
+#define IXGBE_MBVFICR_INDEX(vf_number)	(vf_number >> 4)
+#define IXGBE_MBVFICR(_i)		(0x00710 + ((_i) * 4))
+#define IXGBE_VFLRE(_i)			(((_i & 1) ? 0x001C0 : 0x00600))
+#define IXGBE_VFLREC(_i)		 (0x00700 + ((_i) * 4))
+/* Translated register #defines */
+#define IXGBE_PVFCTRL(P)	(0x00300 + (4 * (P)))
+#define IXGBE_PVFSTATUS(P)	(0x00008 + (0 * (P)))
+#define IXGBE_PVFLINKS(P)	(0x042A4 + (0 * (P)))
+#define IXGBE_PVFRTIMER(P)	(0x00048 + (0 * (P)))
+#define IXGBE_PVFMAILBOX(P)	(0x04C00 + (4 * (P)))
+#define IXGBE_PVFRXMEMWRAP(P)	(0x03190 + (0 * (P)))
+#define IXGBE_PVTEICR(P)	(0x00B00 + (4 * (P)))
+#define IXGBE_PVTEICS(P)	(0x00C00 + (4 * (P)))
+#define IXGBE_PVTEIMS(P)	(0x00D00 + (4 * (P)))
+#define IXGBE_PVTEIMC(P)	(0x00E00 + (4 * (P)))
+#define IXGBE_PVTEIAC(P)	(0x00F00 + (4 * (P)))
+#define IXGBE_PVTEIAM(P)	(0x04D00 + (4 * (P)))
+#define IXGBE_PVTEITR(P)	(((P) < 24) ? (0x00820 + ((P) * 4)) : \
+				 (0x012300 + (((P) - 24) * 4)))
+#define IXGBE_PVTIVAR(P)	(0x12500 + (4 * (P)))
+#define IXGBE_PVTIVAR_MISC(P)	(0x04E00 + (4 * (P)))
+#define IXGBE_PVTRSCINT(P)	(0x12000 + (4 * (P)))
+#define IXGBE_VFPBACL(P)	(0x110C8 + (4 * (P)))
+#define IXGBE_PVFRDBAL(P)	((P < 64) ? (0x01000 + (0x40 * (P))) \
+				 : (0x0D000 + (0x40 * ((P) - 64))))
+#define IXGBE_PVFRDBAH(P)	((P < 64) ? (0x01004 + (0x40 * (P))) \
+				 : (0x0D004 + (0x40 * ((P) - 64))))
+#define IXGBE_PVFRDLEN(P)	((P < 64) ? (0x01008 + (0x40 * (P))) \
+				 : (0x0D008 + (0x40 * ((P) - 64))))
+#define IXGBE_PVFRDH(P)		((P < 64) ? (0x01010 + (0x40 * (P))) \
+				 : (0x0D010 + (0x40 * ((P) - 64))))
+#define IXGBE_PVFRDT(P)		((P < 64) ? (0x01018 + (0x40 * (P))) \
+				 : (0x0D018 + (0x40 * ((P) - 64))))
+#define IXGBE_PVFRXDCTL(P)	((P < 64) ? (0x01028 + (0x40 * (P))) \
+				 : (0x0D028 + (0x40 * ((P) - 64))))
+#define IXGBE_PVFSRRCTL(P)	((P < 64) ? (0x01014 + (0x40 * (P))) \
+				 : (0x0D014 + (0x40 * ((P) - 64))))
+#define IXGBE_PVFPSRTYPE(P)	(0x0EA00 + (4 * (P)))
+#define IXGBE_PVFTDBAL(P)	(0x06000 + (0x40 * (P)))
+#define IXGBE_PVFTDBAH(P)	(0x06004 + (0x40 * (P)))
+#define IXGBE_PVFTTDLEN(P)	(0x06008 + (0x40 * (P)))
+#define IXGBE_PVFTDH(P)		(0x06010 + (0x40 * (P)))
+#define IXGBE_PVFTDT(P)		(0x06018 + (0x40 * (P)))
+#define IXGBE_PVFTXDCTL(P)	(0x06028 + (0x40 * (P)))
+#define IXGBE_PVFTDWBAL(P)	(0x06038 + (0x40 * (P)))
+#define IXGBE_PVFTDWBAH(P)	(0x0603C + (0x40 * (P)))
+#define IXGBE_PVFDCA_RXCTRL(P)	(((P) < 64) ? (0x0100C + (0x40 * (P))) \
+				 : (0x0D00C + (0x40 * ((P) - 64))))
+#define IXGBE_PVFDCA_TXCTRL(P)	(0x0600C + (0x40 * (P)))
+#define IXGBE_PVFGPRC(x)	(0x0101C + (0x40 * (x)))
+#define IXGBE_PVFGPTC(x)	(0x08300 + (0x04 * (x)))
+#define IXGBE_PVFGORC_LSB(x)	(0x01020 + (0x40 * (x)))
+#define IXGBE_PVFGORC_MSB(x)	(0x0D020 + (0x40 * (x)))
+#define IXGBE_PVFGOTC_LSB(x)	(0x08400 + (0x08 * (x)))
+#define IXGBE_PVFGOTC_MSB(x)	(0x08404 + (0x08 * (x)))
+#define IXGBE_PVFMPRC(x)	(0x0D01C + (0x40 * (x)))
+
+#define IXGBE_PVFTDWBALn(q_per_pool, vf_number, vf_q_index) \
+		(IXGBE_PVFTDWBAL((q_per_pool)*(vf_number) + (vf_q_index)))
+#define IXGBE_PVFTDWBAHn(q_per_pool, vf_number, vf_q_index) \
+		(IXGBE_PVFTDWBAH((q_per_pool)*(vf_number) + (vf_q_index)))
+
+#define IXGBE_PVFTDHn(q_per_pool, vf_number, vf_q_index) \
+		(IXGBE_PVFTDH((q_per_pool)*(vf_number) + (vf_q_index)))
+#define IXGBE_PVFTDTn(q_per_pool, vf_number, vf_q_index) \
+		(IXGBE_PVFTDT((q_per_pool)*(vf_number) + (vf_q_index)))
+
+/* Little Endian defines */
+#ifndef __le16
+#define __le16  u16
+#endif
+#ifndef __le32
+#define __le32  u32
+#endif
+#ifndef __le64
+#define __le64  u64
+
+#endif
+#ifndef __be16
+/* Big Endian defines */
+#define __be16  u16
+#define __be32  u32
+#define __be64  u64
+
+#endif
+enum ixgbe_fdir_pballoc_type {
+	IXGBE_FDIR_PBALLOC_NONE = 0,
+	IXGBE_FDIR_PBALLOC_64K  = 1,
+	IXGBE_FDIR_PBALLOC_128K = 2,
+	IXGBE_FDIR_PBALLOC_256K = 3,
+};
+
+/* Flow Director register values */
+#define IXGBE_FDIRCTRL_PBALLOC_64K		0x00000001
+#define IXGBE_FDIRCTRL_PBALLOC_128K		0x00000002
+#define IXGBE_FDIRCTRL_PBALLOC_256K		0x00000003
+#define IXGBE_FDIRCTRL_INIT_DONE		0x00000008
+#define IXGBE_FDIRCTRL_PERFECT_MATCH		0x00000010
+#define IXGBE_FDIRCTRL_REPORT_STATUS		0x00000020
+#define IXGBE_FDIRCTRL_REPORT_STATUS_ALWAYS	0x00000080
+#define IXGBE_FDIRCTRL_DROP_Q_SHIFT		8
+#define IXGBE_FDIRCTRL_DROP_Q_MASK		0x00007F00
+#define IXGBE_FDIRCTRL_FLEX_SHIFT		16
+#define IXGBE_FDIRCTRL_DROP_NO_MATCH		0x00008000
+#define IXGBE_FDIRCTRL_FILTERMODE_SHIFT		21
+#define IXGBE_FDIRCTRL_FILTERMODE_MACVLAN	0x0001 /* bit 23:21, 001b */
+#define IXGBE_FDIRCTRL_FILTERMODE_CLOUD		0x0002 /* bit 23:21, 010b */
+#define IXGBE_FDIRCTRL_SEARCHLIM		0x00800000
+#define IXGBE_FDIRCTRL_FILTERMODE_MASK		0x00E00000
+#define IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT		24
+#define IXGBE_FDIRCTRL_FULL_THRESH_MASK		0xF0000000
+#define IXGBE_FDIRCTRL_FULL_THRESH_SHIFT	28
+
+#define IXGBE_FDIRTCPM_DPORTM_SHIFT		16
+#define IXGBE_FDIRUDPM_DPORTM_SHIFT		16
+#define IXGBE_FDIRIP6M_DIPM_SHIFT		16
+#define IXGBE_FDIRM_VLANID			0x00000001
+#define IXGBE_FDIRM_VLANP			0x00000002
+#define IXGBE_FDIRM_POOL			0x00000004
+#define IXGBE_FDIRM_L4P				0x00000008
+#define IXGBE_FDIRM_FLEX			0x00000010
+#define IXGBE_FDIRM_DIPv6			0x00000020
+#define IXGBE_FDIRM_L3P				0x00000040
+
+#define IXGBE_FDIRIP6M_INNER_MAC	0x03F0 /* bit 9:4 */
+#define IXGBE_FDIRIP6M_TUNNEL_TYPE	0x0800 /* bit 11 */
+#define IXGBE_FDIRIP6M_TNI_VNI		0xF000 /* bit 15:12 */
+#define IXGBE_FDIRIP6M_TNI_VNI_24	0x1000 /* bit 12 */
+#define IXGBE_FDIRIP6M_ALWAYS_MASK	0x040F /* bit 10, 3:0 */
+
+#define IXGBE_FDIRFREE_FREE_MASK		0xFFFF
+#define IXGBE_FDIRFREE_FREE_SHIFT		0
+#define IXGBE_FDIRFREE_COLL_MASK		0x7FFF0000
+#define IXGBE_FDIRFREE_COLL_SHIFT		16
+#define IXGBE_FDIRLEN_MAXLEN_MASK		0x3F
+#define IXGBE_FDIRLEN_MAXLEN_SHIFT		0
+#define IXGBE_FDIRLEN_MAXHASH_MASK		0x7FFF0000
+#define IXGBE_FDIRLEN_MAXHASH_SHIFT		16
+#define IXGBE_FDIRUSTAT_ADD_MASK		0xFFFF
+#define IXGBE_FDIRUSTAT_ADD_SHIFT		0
+#define IXGBE_FDIRUSTAT_REMOVE_MASK		0xFFFF0000
+#define IXGBE_FDIRUSTAT_REMOVE_SHIFT		16
+#define IXGBE_FDIRFSTAT_FADD_MASK		0x00FF
+#define IXGBE_FDIRFSTAT_FADD_SHIFT		0
+#define IXGBE_FDIRFSTAT_FREMOVE_MASK		0xFF00
+#define IXGBE_FDIRFSTAT_FREMOVE_SHIFT		8
+#define IXGBE_FDIRPORT_DESTINATION_SHIFT	16
+#define IXGBE_FDIRVLAN_FLEX_SHIFT		16
+#define IXGBE_FDIRHASH_BUCKET_VALID_SHIFT	15
+#define IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT	16
+
+#define IXGBE_FDIRCMD_CMD_MASK			0x00000003
+#define IXGBE_FDIRCMD_CMD_ADD_FLOW		0x00000001
+#define IXGBE_FDIRCMD_CMD_REMOVE_FLOW		0x00000002
+#define IXGBE_FDIRCMD_CMD_QUERY_REM_FILT	0x00000003
+#define IXGBE_FDIRCMD_FILTER_VALID		0x00000004
+#define IXGBE_FDIRCMD_FILTER_UPDATE		0x00000008
+#define IXGBE_FDIRCMD_IPv6DMATCH		0x00000010
+#define IXGBE_FDIRCMD_L4TYPE_UDP		0x00000020
+#define IXGBE_FDIRCMD_L4TYPE_TCP		0x00000040
+#define IXGBE_FDIRCMD_L4TYPE_SCTP		0x00000060
+#define IXGBE_FDIRCMD_IPV6			0x00000080
+#define IXGBE_FDIRCMD_CLEARHT			0x00000100
+#define IXGBE_FDIRCMD_DROP			0x00000200
+#define IXGBE_FDIRCMD_INT			0x00000400
+#define IXGBE_FDIRCMD_LAST			0x00000800
+#define IXGBE_FDIRCMD_COLLISION			0x00001000
+#define IXGBE_FDIRCMD_QUEUE_EN			0x00008000
+#define IXGBE_FDIRCMD_FLOW_TYPE_SHIFT		5
+#define IXGBE_FDIRCMD_RX_QUEUE_SHIFT		16
+#define IXGBE_FDIRCMD_TUNNEL_FILTER_SHIFT	23
+#define IXGBE_FDIRCMD_VT_POOL_SHIFT		24
+#define IXGBE_FDIR_INIT_DONE_POLL		10
+#define IXGBE_FDIRCMD_CMD_POLL			10
+#define IXGBE_FDIRCMD_TUNNEL_FILTER		0x00800000
+#define IXGBE_FDIR_DROP_QUEUE			127
+
+
+/* Manageablility Host Interface defines */
+#define IXGBE_HI_MAX_BLOCK_BYTE_LENGTH	1792 /* Num of bytes in range */
+#define IXGBE_HI_MAX_BLOCK_DWORD_LENGTH	448 /* Num of dwords in range */
+#define IXGBE_HI_COMMAND_TIMEOUT	500 /* Process HI command limit */
+#define IXGBE_HI_FLASH_ERASE_TIMEOUT	1000 /* Process Erase command limit */
+#define IXGBE_HI_FLASH_UPDATE_TIMEOUT	5000 /* Process Update command limit */
+#define IXGBE_HI_FLASH_APPLY_TIMEOUT	0 /* Process Apply command limit */
+#define IXGBE_HI_PHY_MGMT_REQ_TIMEOUT	2000 /* Wait up to 2 seconds */
+
+/* CEM Support */
+#define FW_CEM_HDR_LEN			0x4
+#define FW_CEM_CMD_DRIVER_INFO		0xDD
+#define FW_CEM_CMD_DRIVER_INFO_LEN	0x5
+#define FW_CEM_CMD_RESERVED		0X0
+#define FW_CEM_UNUSED_VER		0x0
+#define FW_CEM_MAX_RETRIES		3
+#define FW_CEM_RESP_STATUS_SUCCESS	0x1
+#define FW_READ_SHADOW_RAM_CMD		0x31
+#define FW_READ_SHADOW_RAM_LEN		0x6
+#define FW_WRITE_SHADOW_RAM_CMD		0x33
+#define FW_WRITE_SHADOW_RAM_LEN		0xA /* 8 plus 1 WORD to write */
+#define FW_SHADOW_RAM_DUMP_CMD		0x36
+#define FW_SHADOW_RAM_DUMP_LEN		0
+#define FW_DEFAULT_CHECKSUM		0xFF /* checksum always 0xFF */
+#define FW_NVM_DATA_OFFSET		3
+#define FW_MAX_READ_BUFFER_SIZE		1024
+#define FW_DISABLE_RXEN_CMD		0xDE
+#define FW_DISABLE_RXEN_LEN		0x1
+#define FW_PHY_MGMT_REQ_CMD		0x20
+#define FW_PHY_TOKEN_REQ_CMD		0xA
+#define FW_PHY_TOKEN_REQ_LEN		2
+#define FW_PHY_TOKEN_REQ		0
+#define FW_PHY_TOKEN_REL		1
+#define FW_PHY_TOKEN_OK			1
+#define FW_PHY_TOKEN_RETRY		0x80
+#define FW_PHY_TOKEN_DELAY		5	/* milliseconds */
+#define FW_PHY_TOKEN_WAIT		5	/* seconds */
+#define FW_PHY_TOKEN_RETRIES ((FW_PHY_TOKEN_WAIT * 1000) / FW_PHY_TOKEN_DELAY)
+#define FW_INT_PHY_REQ_CMD		0xB
+#define FW_INT_PHY_REQ_LEN		10
+#define FW_INT_PHY_REQ_READ		0
+#define FW_INT_PHY_REQ_WRITE		1
+
+/* Host Interface Command Structures */
+
+struct ixgbe_hic_hdr {
+	u8 cmd;
+	u8 buf_len;
+	union {
+		u8 cmd_resv;
+		u8 ret_status;
+	} cmd_or_resp;
+	u8 checksum;
+};
+
+struct ixgbe_hic_hdr2_req {
+	u8 cmd;
+	u8 buf_lenh;
+	u8 buf_lenl;
+	u8 checksum;
+};
+
+struct ixgbe_hic_hdr2_rsp {
+	u8 cmd;
+	u8 buf_lenl;
+	u8 buf_lenh_status;	/* 7-5: high bits of buf_len, 4-0: status */
+	u8 checksum;
+};
+
+union ixgbe_hic_hdr2 {
+	struct ixgbe_hic_hdr2_req req;
+	struct ixgbe_hic_hdr2_rsp rsp;
+};
+
+struct ixgbe_hic_drv_info {
+	struct ixgbe_hic_hdr hdr;
+	u8 port_num;
+	u8 ver_sub;
+	u8 ver_build;
+	u8 ver_min;
+	u8 ver_maj;
+	u8 pad; /* end spacing to ensure length is mult. of dword */
+	u16 pad2; /* end spacing to ensure length is mult. of dword2 */
+};
+
+/* These need to be dword aligned */
+struct ixgbe_hic_read_shadow_ram {
+	union ixgbe_hic_hdr2 hdr;
+	u32 address;
+	u16 length;
+	u16 pad2;
+	u16 data;
+	u16 pad3;
+};
+
+struct ixgbe_hic_write_shadow_ram {
+	union ixgbe_hic_hdr2 hdr;
+	u32 address;
+	u16 length;
+	u16 pad2;
+	u16 data;
+	u16 pad3;
+};
+
+struct ixgbe_hic_disable_rxen {
+	struct ixgbe_hic_hdr hdr;
+	u8  port_number;
+	u8  pad2;
+	u16 pad3;
+};
+
+struct ixgbe_hic_phy_token_req {
+	struct ixgbe_hic_hdr hdr;
+	u8 port_number;
+	u8 command_type;
+	u16 pad;
+};
+
+struct ixgbe_hic_internal_phy_req {
+	struct ixgbe_hic_hdr hdr;
+	u8 port_number;
+	u8 command_type;
+	u16 address;
+	u16 rsv1;
+	u32 write_data;
+	u16 pad;
+};
+
+struct ixgbe_hic_internal_phy_resp {
+	struct ixgbe_hic_hdr hdr;
+	u32 read_data;
+};
+
+
+/* Transmit Descriptor - Legacy */
+struct ixgbe_legacy_tx_desc {
+	u64 buffer_addr; /* Address of the descriptor's data buffer */
+	union {
+		__le32 data;
+		struct {
+			__le16 length; /* Data buffer length */
+			u8 cso; /* Checksum offset */
+			u8 cmd; /* Descriptor control */
+		} flags;
+	} lower;
+	union {
+		__le32 data;
+		struct {
+			u8 status; /* Descriptor status */
+			u8 css; /* Checksum start */
+			__le16 vlan;
+		} fields;
+	} upper;
+};
+
+/* Transmit Descriptor - Advanced */
+union ixgbe_adv_tx_desc {
+	struct {
+		__le64 buffer_addr; /* Address of descriptor's data buf */
+		__le32 cmd_type_len;
+		__le32 olinfo_status;
+	} read;
+	struct {
+		__le64 rsvd; /* Reserved */
+		__le32 nxtseq_seed;
+		__le32 status;
+	} wb;
+};
+
+/* Receive Descriptor - Legacy */
+struct ixgbe_legacy_rx_desc {
+	__le64 buffer_addr; /* Address of the descriptor's data buffer */
+	__le16 length; /* Length of data DMAed into data buffer */
+	__le16 csum; /* Packet checksum */
+	u8 status;   /* Descriptor status */
+	u8 errors;   /* Descriptor Errors */
+	__le16 vlan;
+};
+
+/* Receive Descriptor - Advanced */
+union ixgbe_adv_rx_desc {
+	struct {
+		__le64 pkt_addr; /* Packet buffer address */
+		__le64 hdr_addr; /* Header buffer address */
+	} read;
+	struct {
+		struct {
+			union {
+				__le32 data;
+				struct {
+					__le16 pkt_info; /* RSS, Pkt type */
+					__le16 hdr_info; /* Splithdr, hdrlen */
+				} hs_rss;
+			} lo_dword;
+			union {
+				__le32 rss; /* RSS Hash */
+				struct {
+					__le16 ip_id; /* IP id */
+					__le16 csum; /* Packet Checksum */
+				} csum_ip;
+			} hi_dword;
+		} lower;
+		struct {
+			__le32 status_error; /* ext status/error */
+			__le16 length; /* Packet length */
+			__le16 vlan; /* VLAN tag */
+		} upper;
+	} wb;  /* writeback */
+};
+
+/* Context descriptors */
+struct ixgbe_adv_tx_context_desc {
+	__le32 vlan_macip_lens;
+	__le32 seqnum_seed;
+	__le32 type_tucmd_mlhl;
+	__le32 mss_l4len_idx;
+};
+
+/* Adv Transmit Descriptor Config Masks */
+#define IXGBE_ADVTXD_DTALEN_MASK	0x0000FFFF /* Data buf length(bytes) */
+#define IXGBE_ADVTXD_MAC_LINKSEC	0x00040000 /* Insert LinkSec */
+#define IXGBE_ADVTXD_MAC_TSTAMP		0x00080000 /* IEEE1588 time stamp */
+#define IXGBE_ADVTXD_IPSEC_SA_INDEX_MASK 0x000003FF /* IPSec SA index */
+#define IXGBE_ADVTXD_IPSEC_ESP_LEN_MASK	0x000001FF /* IPSec ESP length */
+#define IXGBE_ADVTXD_DTYP_MASK		0x00F00000 /* DTYP mask */
+#define IXGBE_ADVTXD_DTYP_CTXT		0x00200000 /* Adv Context Desc */
+#define IXGBE_ADVTXD_DTYP_DATA		0x00300000 /* Adv Data Descriptor */
+#define IXGBE_ADVTXD_DCMD_EOP		IXGBE_TXD_CMD_EOP  /* End of Packet */
+#define IXGBE_ADVTXD_DCMD_IFCS		IXGBE_TXD_CMD_IFCS /* Insert FCS */
+#define IXGBE_ADVTXD_DCMD_RS		IXGBE_TXD_CMD_RS /* Report Status */
+#define IXGBE_ADVTXD_DCMD_DDTYP_ISCSI	0x10000000 /* DDP hdr type or iSCSI */
+#define IXGBE_ADVTXD_DCMD_DEXT		IXGBE_TXD_CMD_DEXT /* Desc ext 1=Adv */
+#define IXGBE_ADVTXD_DCMD_VLE		IXGBE_TXD_CMD_VLE  /* VLAN pkt enable */
+#define IXGBE_ADVTXD_DCMD_TSE		0x80000000 /* TCP Seg enable */
+#define IXGBE_ADVTXD_STAT_DD		IXGBE_TXD_STAT_DD  /* Descriptor Done */
+#define IXGBE_ADVTXD_STAT_SN_CRC	0x00000002 /* NXTSEQ/SEED pres in WB */
+#define IXGBE_ADVTXD_STAT_RSV		0x0000000C /* STA Reserved */
+#define IXGBE_ADVTXD_IDX_SHIFT		4 /* Adv desc Index shift */
+#define IXGBE_ADVTXD_CC			0x00000080 /* Check Context */
+#define IXGBE_ADVTXD_POPTS_SHIFT	8  /* Adv desc POPTS shift */
+#define IXGBE_ADVTXD_POPTS_IXSM		(IXGBE_TXD_POPTS_IXSM << \
+					 IXGBE_ADVTXD_POPTS_SHIFT)
+#define IXGBE_ADVTXD_POPTS_TXSM		(IXGBE_TXD_POPTS_TXSM << \
+					 IXGBE_ADVTXD_POPTS_SHIFT)
+#define IXGBE_ADVTXD_POPTS_ISCO_1ST	0x00000000 /* 1st TSO of iSCSI PDU */
+#define IXGBE_ADVTXD_POPTS_ISCO_MDL	0x00000800 /* Middle TSO of iSCSI PDU */
+#define IXGBE_ADVTXD_POPTS_ISCO_LAST	0x00001000 /* Last TSO of iSCSI PDU */
+/* 1st&Last TSO-full iSCSI PDU */
+#define IXGBE_ADVTXD_POPTS_ISCO_FULL	0x00001800
+#define IXGBE_ADVTXD_POPTS_RSV		0x00002000 /* POPTS Reserved */
+#define IXGBE_ADVTXD_PAYLEN_SHIFT	14 /* Adv desc PAYLEN shift */
+#define IXGBE_ADVTXD_MACLEN_SHIFT	9  /* Adv ctxt desc mac len shift */
+#define IXGBE_ADVTXD_VLAN_SHIFT		16  /* Adv ctxt vlan tag shift */
+#define IXGBE_ADVTXD_TUCMD_IPV4		0x00000400 /* IP Packet Type: 1=IPv4 */
+#define IXGBE_ADVTXD_TUCMD_IPV6		0x00000000 /* IP Packet Type: 0=IPv6 */
+#define IXGBE_ADVTXD_TUCMD_L4T_UDP	0x00000000 /* L4 Packet TYPE of UDP */
+#define IXGBE_ADVTXD_TUCMD_L4T_TCP	0x00000800 /* L4 Packet TYPE of TCP */
+#define IXGBE_ADVTXD_TUCMD_L4T_SCTP	0x00001000 /* L4 Packet TYPE of SCTP */
+#define IXGBE_ADVTXD_TUCMD_L4T_RSV	0x00001800 /* RSV L4 Packet TYPE */
+#define IXGBE_ADVTXD_TUCMD_MKRREQ	0x00002000 /* req Markers and CRC */
+#define IXGBE_ADVTXD_POPTS_IPSEC	0x00000400 /* IPSec offload request */
+#define IXGBE_ADVTXD_TUCMD_IPSEC_TYPE_ESP 0x00002000 /* IPSec Type ESP */
+#define IXGBE_ADVTXD_TUCMD_IPSEC_ENCRYPT_EN 0x00004000/* ESP Encrypt Enable */
+#define IXGBE_ADVTXT_TUCMD_FCOE		0x00008000 /* FCoE Frame Type */
+#define IXGBE_ADVTXD_FCOEF_EOF_MASK	(0x3 << 10) /* FC EOF index */
+#define IXGBE_ADVTXD_FCOEF_SOF		((1 << 2) << 10) /* FC SOF index */
+#define IXGBE_ADVTXD_FCOEF_PARINC	((1 << 3) << 10) /* Rel_Off in F_CTL */
+#define IXGBE_ADVTXD_FCOEF_ORIE		((1 << 4) << 10) /* Orientation End */
+#define IXGBE_ADVTXD_FCOEF_ORIS		((1 << 5) << 10) /* Orientation Start */
+#define IXGBE_ADVTXD_FCOEF_EOF_N	(0x0 << 10) /* 00: EOFn */
+#define IXGBE_ADVTXD_FCOEF_EOF_T	(0x1 << 10) /* 01: EOFt */
+#define IXGBE_ADVTXD_FCOEF_EOF_NI	(0x2 << 10) /* 10: EOFni */
+#define IXGBE_ADVTXD_FCOEF_EOF_A	(0x3 << 10) /* 11: EOFa */
+#define IXGBE_ADVTXD_L4LEN_SHIFT	8  /* Adv ctxt L4LEN shift */
+#define IXGBE_ADVTXD_MSS_SHIFT		16  /* Adv ctxt MSS shift */
+
+#define IXGBE_ADVTXD_OUTER_IPLEN	16 /* Adv ctxt OUTERIPLEN shift */
+#define IXGBE_ADVTXD_TUNNEL_LEN 	24 /* Adv ctxt TUNNELLEN shift */
+#define IXGBE_ADVTXD_TUNNEL_TYPE_SHIFT	16 /* Adv Tx Desc Tunnel Type shift */
+#define IXGBE_ADVTXD_OUTERIPCS_SHIFT	17 /* Adv Tx Desc OUTERIPCS Shift */
+#define IXGBE_ADVTXD_TUNNEL_TYPE_NVGRE	1  /* Adv Tx Desc Tunnel Type NVGRE */
+/* Adv Tx Desc OUTERIPCS Shift for X550EM_a */
+#define IXGBE_ADVTXD_OUTERIPCS_SHIFT_X550EM_a	26
+/* Autonegotiation advertised speeds */
+typedef u32 ixgbe_autoneg_advertised;
+/* Link speed */
+typedef u32 ixgbe_link_speed;
+#define IXGBE_LINK_SPEED_UNKNOWN	0
+#define IXGBE_LINK_SPEED_100_FULL	0x0008
+#define IXGBE_LINK_SPEED_1GB_FULL	0x0020
+#define IXGBE_LINK_SPEED_2_5GB_FULL	0x0400
+#define IXGBE_LINK_SPEED_5GB_FULL	0x0800
+#define IXGBE_LINK_SPEED_10GB_FULL	0x0080
+#define IXGBE_LINK_SPEED_82598_AUTONEG	(IXGBE_LINK_SPEED_1GB_FULL | \
+					 IXGBE_LINK_SPEED_10GB_FULL)
+#define IXGBE_LINK_SPEED_82599_AUTONEG	(IXGBE_LINK_SPEED_100_FULL | \
+					 IXGBE_LINK_SPEED_1GB_FULL | \
+					 IXGBE_LINK_SPEED_10GB_FULL)
+
+/* Physical layer type */
+typedef u32 ixgbe_physical_layer;
+#define IXGBE_PHYSICAL_LAYER_UNKNOWN		0
+#define IXGBE_PHYSICAL_LAYER_10GBASE_T		0x0001
+#define IXGBE_PHYSICAL_LAYER_1000BASE_T		0x0002
+#define IXGBE_PHYSICAL_LAYER_100BASE_TX		0x0004
+#define IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU	0x0008
+#define IXGBE_PHYSICAL_LAYER_10GBASE_LR		0x0010
+#define IXGBE_PHYSICAL_LAYER_10GBASE_LRM	0x0020
+#define IXGBE_PHYSICAL_LAYER_10GBASE_SR		0x0040
+#define IXGBE_PHYSICAL_LAYER_10GBASE_KX4	0x0080
+#define IXGBE_PHYSICAL_LAYER_10GBASE_CX4	0x0100
+#define IXGBE_PHYSICAL_LAYER_1000BASE_KX	0x0200
+#define IXGBE_PHYSICAL_LAYER_1000BASE_BX	0x0400
+#define IXGBE_PHYSICAL_LAYER_10GBASE_KR		0x0800
+#define IXGBE_PHYSICAL_LAYER_10GBASE_XAUI	0x1000
+#define IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA	0x2000
+#define IXGBE_PHYSICAL_LAYER_1000BASE_SX	0x4000
+
+/* Flow Control Data Sheet defined values
+ * Calculation and defines taken from 802.1bb Annex O
+ */
+
+/* BitTimes (BT) conversion */
+#define IXGBE_BT2KB(BT)		((BT + (8 * 1024 - 1)) / (8 * 1024))
+#define IXGBE_B2BT(BT)		(BT * 8)
+
+/* Calculate Delay to respond to PFC */
+#define IXGBE_PFC_D	672
+
+/* Calculate Cable Delay */
+#define IXGBE_CABLE_DC	5556 /* Delay Copper */
+#define IXGBE_CABLE_DO	5000 /* Delay Optical */
+
+/* Calculate Interface Delay X540 */
+#define IXGBE_PHY_DC	25600 /* Delay 10G BASET */
+#define IXGBE_MAC_DC	8192  /* Delay Copper XAUI interface */
+#define IXGBE_XAUI_DC	(2 * 2048) /* Delay Copper Phy */
+
+#define IXGBE_ID_X540	(IXGBE_MAC_DC + IXGBE_XAUI_DC + IXGBE_PHY_DC)
+
+/* Calculate Interface Delay 82598, 82599 */
+#define IXGBE_PHY_D	12800
+#define IXGBE_MAC_D	4096
+#define IXGBE_XAUI_D	(2 * 1024)
+
+#define IXGBE_ID	(IXGBE_MAC_D + IXGBE_XAUI_D + IXGBE_PHY_D)
+
+/* Calculate Delay incurred from higher layer */
+#define IXGBE_HD	6144
+
+/* Calculate PCI Bus delay for low thresholds */
+#define IXGBE_PCI_DELAY	10000
+
+/* Calculate X540 delay value in bit times */
+#define IXGBE_DV_X540(_max_frame_link, _max_frame_tc) \
+			((36 * \
+			  (IXGBE_B2BT(_max_frame_link) + \
+			   IXGBE_PFC_D + \
+			   (2 * IXGBE_CABLE_DC) + \
+			   (2 * IXGBE_ID_X540) + \
+			   IXGBE_HD) / 25 + 1) + \
+			 2 * IXGBE_B2BT(_max_frame_tc))
+
+/* Calculate 82599, 82598 delay value in bit times */
+#define IXGBE_DV(_max_frame_link, _max_frame_tc) \
+			((36 * \
+			  (IXGBE_B2BT(_max_frame_link) + \
+			   IXGBE_PFC_D + \
+			   (2 * IXGBE_CABLE_DC) + \
+			   (2 * IXGBE_ID) + \
+			   IXGBE_HD) / 25 + 1) + \
+			 2 * IXGBE_B2BT(_max_frame_tc))
+
+/* Calculate low threshold delay values */
+#define IXGBE_LOW_DV_X540(_max_frame_tc) \
+			(2 * IXGBE_B2BT(_max_frame_tc) + \
+			(36 * IXGBE_PCI_DELAY / 25) + 1)
+#define IXGBE_LOW_DV(_max_frame_tc) \
+			(2 * IXGBE_LOW_DV_X540(_max_frame_tc))
+
+/* Software ATR hash keys */
+#define IXGBE_ATR_BUCKET_HASH_KEY	0x3DAD14E2
+#define IXGBE_ATR_SIGNATURE_HASH_KEY	0x174D3614
+
+/* Software ATR input stream values and masks */
+#define IXGBE_ATR_HASH_MASK		0x7fff
+#define IXGBE_ATR_L4TYPE_MASK		0x3
+#define IXGBE_ATR_L4TYPE_UDP		0x1
+#define IXGBE_ATR_L4TYPE_TCP		0x2
+#define IXGBE_ATR_L4TYPE_SCTP		0x3
+#define IXGBE_ATR_L4TYPE_IPV6_MASK	0x4
+#define IXGBE_ATR_L4TYPE_TUNNEL_MASK	0x10
+enum ixgbe_atr_flow_type {
+	IXGBE_ATR_FLOW_TYPE_IPV4	= 0x0,
+	IXGBE_ATR_FLOW_TYPE_UDPV4	= 0x1,
+	IXGBE_ATR_FLOW_TYPE_TCPV4	= 0x2,
+	IXGBE_ATR_FLOW_TYPE_SCTPV4	= 0x3,
+	IXGBE_ATR_FLOW_TYPE_IPV6	= 0x4,
+	IXGBE_ATR_FLOW_TYPE_UDPV6	= 0x5,
+	IXGBE_ATR_FLOW_TYPE_TCPV6	= 0x6,
+	IXGBE_ATR_FLOW_TYPE_SCTPV6	= 0x7,
+	IXGBE_ATR_FLOW_TYPE_TUNNELED_IPV4	= 0x10,
+	IXGBE_ATR_FLOW_TYPE_TUNNELED_UDPV4	= 0x11,
+	IXGBE_ATR_FLOW_TYPE_TUNNELED_TCPV4	= 0x12,
+	IXGBE_ATR_FLOW_TYPE_TUNNELED_SCTPV4	= 0x13,
+	IXGBE_ATR_FLOW_TYPE_TUNNELED_IPV6	= 0x14,
+	IXGBE_ATR_FLOW_TYPE_TUNNELED_UDPV6	= 0x15,
+	IXGBE_ATR_FLOW_TYPE_TUNNELED_TCPV6	= 0x16,
+	IXGBE_ATR_FLOW_TYPE_TUNNELED_SCTPV6	= 0x17,
+};
+
+/* Flow Director ATR input struct. */
+union ixgbe_atr_input {
+	/*
+	 * Byte layout in order, all values with MSB first:
+	 *
+	 * vm_pool	- 1 byte
+	 * flow_type	- 1 byte
+	 * vlan_id	- 2 bytes
+	 * src_ip	- 16 bytes
+	 * inner_mac	- 6 bytes
+	 * cloud_mode	- 2 bytes
+	 * tni_vni	- 4 bytes
+	 * dst_ip	- 16 bytes
+	 * src_port	- 2 bytes
+	 * dst_port	- 2 bytes
+	 * flex_bytes	- 2 bytes
+	 * bkt_hash	- 2 bytes
+	 */
+	struct {
+		u8 vm_pool;
+		u8 flow_type;
+		__be16 vlan_id;
+		__be32 dst_ip[4];
+		__be32 src_ip[4];
+		u8 inner_mac[6];
+		__be16 tunnel_type;
+		__be32 tni_vni;
+		__be16 src_port;
+		__be16 dst_port;
+		__be16 flex_bytes;
+		__be16 bkt_hash;
+	} formatted;
+	__be32 dword_stream[14];
+};
+
+/* Flow Director compressed ATR hash input struct */
+union ixgbe_atr_hash_dword {
+	struct {
+		u8 vm_pool;
+		u8 flow_type;
+		__be16 vlan_id;
+	} formatted;
+	__be32 ip;
+	struct {
+		__be16 src;
+		__be16 dst;
+	} port;
+	__be16 flex_bytes;
+	__be32 dword;
+};
+
+
+#define IXGBE_MVALS_INIT(m)	\
+	IXGBE_CAT(EEC, m),		\
+	IXGBE_CAT(FLA, m),		\
+	IXGBE_CAT(GRC, m),		\
+	IXGBE_CAT(SRAMREL, m),		\
+	IXGBE_CAT(FACTPS, m),		\
+	IXGBE_CAT(SWSM, m),		\
+	IXGBE_CAT(SWFW_SYNC, m),	\
+	IXGBE_CAT(FWSM, m),		\
+	IXGBE_CAT(SDP0_GPIEN, m),	\
+	IXGBE_CAT(SDP1_GPIEN, m),	\
+	IXGBE_CAT(SDP2_GPIEN, m),	\
+	IXGBE_CAT(EICR_GPI_SDP0, m),	\
+	IXGBE_CAT(EICR_GPI_SDP1, m),	\
+	IXGBE_CAT(EICR_GPI_SDP2, m),	\
+	IXGBE_CAT(CIAA, m),		\
+	IXGBE_CAT(CIAD, m),		\
+	IXGBE_CAT(I2C_CLK_IN, m),	\
+	IXGBE_CAT(I2C_CLK_OUT, m),	\
+	IXGBE_CAT(I2C_DATA_IN, m),	\
+	IXGBE_CAT(I2C_DATA_OUT, m),	\
+	IXGBE_CAT(I2C_DATA_OE_N_EN, m),	\
+	IXGBE_CAT(I2C_BB_EN, m),	\
+	IXGBE_CAT(I2C_CLK_OE_N_EN, m),	\
+	IXGBE_CAT(I2CCTL, m)
+
+enum ixgbe_mvals {
+	IXGBE_MVALS_INIT(_IDX),
+	IXGBE_MVALS_IDX_LIMIT
+};
+
+/*
+ * Unavailable: The FCoE Boot Option ROM is not present in the flash.
+ * Disabled: Present; boot order is not set for any targets on the port.
+ * Enabled: Present; boot order is set for at least one target on the port.
+ */
+enum ixgbe_fcoe_boot_status {
+	ixgbe_fcoe_bootstatus_disabled = 0,
+	ixgbe_fcoe_bootstatus_enabled = 1,
+	ixgbe_fcoe_bootstatus_unavailable = 0xFFFF
+};
+
+enum ixgbe_eeprom_type {
+	ixgbe_eeprom_uninitialized = 0,
+	ixgbe_eeprom_spi,
+	ixgbe_flash,
+	ixgbe_eeprom_none /* No NVM support */
+};
+
+enum ixgbe_mac_type {
+	ixgbe_mac_unknown = 0,
+	ixgbe_mac_82598EB,
+	ixgbe_mac_82599EB,
+	ixgbe_mac_82599_vf,
+	ixgbe_mac_X540,
+	ixgbe_mac_X540_vf,
+	ixgbe_mac_X550,
+	ixgbe_mac_X550EM_x,
+	ixgbe_mac_X550EM_a,
+	ixgbe_mac_X550_vf,
+	ixgbe_mac_X550EM_x_vf,
+	ixgbe_mac_X550EM_a_vf,
+	ixgbe_num_macs
+};
+
+enum ixgbe_phy_type {
+	ixgbe_phy_unknown = 0,
+	ixgbe_phy_none,
+	ixgbe_phy_tn,
+	ixgbe_phy_aq,
+	ixgbe_phy_x550em_kr,
+	ixgbe_phy_x550em_kx4,
+	ixgbe_phy_x550em_ext_t,
+	ixgbe_phy_cu_unknown,
+	ixgbe_phy_qt,
+	ixgbe_phy_xaui,
+	ixgbe_phy_nl,
+	ixgbe_phy_sfp_passive_tyco,
+	ixgbe_phy_sfp_passive_unknown,
+	ixgbe_phy_sfp_active_unknown,
+	ixgbe_phy_sfp_avago,
+	ixgbe_phy_sfp_ftl,
+	ixgbe_phy_sfp_ftl_active,
+	ixgbe_phy_sfp_unknown,
+	ixgbe_phy_sfp_intel,
+	ixgbe_phy_qsfp_passive_unknown,
+	ixgbe_phy_qsfp_active_unknown,
+	ixgbe_phy_qsfp_intel,
+	ixgbe_phy_qsfp_unknown,
+	ixgbe_phy_sfp_unsupported, /*Enforce bit set with unsupported module*/
+	ixgbe_phy_generic
+};
+
+/*
+ * SFP+ module type IDs:
+ *
+ * ID	Module Type
+ * =============
+ * 0	SFP_DA_CU
+ * 1	SFP_SR
+ * 2	SFP_LR
+ * 3	SFP_DA_CU_CORE0 - 82599-specific
+ * 4	SFP_DA_CU_CORE1 - 82599-specific
+ * 5	SFP_SR/LR_CORE0 - 82599-specific
+ * 6	SFP_SR/LR_CORE1 - 82599-specific
+ */
+enum ixgbe_sfp_type {
+	ixgbe_sfp_type_da_cu = 0,
+	ixgbe_sfp_type_sr = 1,
+	ixgbe_sfp_type_lr = 2,
+	ixgbe_sfp_type_da_cu_core0 = 3,
+	ixgbe_sfp_type_da_cu_core1 = 4,
+	ixgbe_sfp_type_srlr_core0 = 5,
+	ixgbe_sfp_type_srlr_core1 = 6,
+	ixgbe_sfp_type_da_act_lmt_core0 = 7,
+	ixgbe_sfp_type_da_act_lmt_core1 = 8,
+	ixgbe_sfp_type_1g_cu_core0 = 9,
+	ixgbe_sfp_type_1g_cu_core1 = 10,
+	ixgbe_sfp_type_1g_sx_core0 = 11,
+	ixgbe_sfp_type_1g_sx_core1 = 12,
+	ixgbe_sfp_type_1g_lx_core0 = 13,
+	ixgbe_sfp_type_1g_lx_core1 = 14,
+	ixgbe_sfp_type_not_present = 0xFFFE,
+	ixgbe_sfp_type_unknown = 0xFFFF
+};
+
+enum ixgbe_media_type {
+	ixgbe_media_type_unknown = 0,
+	ixgbe_media_type_fiber,
+	ixgbe_media_type_fiber_qsfp,
+	ixgbe_media_type_fiber_lco,
+	ixgbe_media_type_copper,
+	ixgbe_media_type_backplane,
+	ixgbe_media_type_cx4,
+	ixgbe_media_type_virtual
+};
+
+/* Flow Control Settings */
+enum ixgbe_fc_mode {
+	ixgbe_fc_none = 0,
+	ixgbe_fc_rx_pause,
+	ixgbe_fc_tx_pause,
+	ixgbe_fc_full,
+	ixgbe_fc_default
+};
+
+/* Smart Speed Settings */
+#define IXGBE_SMARTSPEED_MAX_RETRIES	3
+enum ixgbe_smart_speed {
+	ixgbe_smart_speed_auto = 0,
+	ixgbe_smart_speed_on,
+	ixgbe_smart_speed_off
+};
+
+/* PCI bus types */
+enum ixgbe_bus_type {
+	ixgbe_bus_type_unknown = 0,
+	ixgbe_bus_type_pci,
+	ixgbe_bus_type_pcix,
+	ixgbe_bus_type_pci_express,
+	ixgbe_bus_type_internal,
+	ixgbe_bus_type_reserved
+};
+
+/* PCI bus speeds */
+enum ixgbe_bus_speed {
+	ixgbe_bus_speed_unknown	= 0,
+	ixgbe_bus_speed_33	= 33,
+	ixgbe_bus_speed_66	= 66,
+	ixgbe_bus_speed_100	= 100,
+	ixgbe_bus_speed_120	= 120,
+	ixgbe_bus_speed_133	= 133,
+	ixgbe_bus_speed_2500	= 2500,
+	ixgbe_bus_speed_5000	= 5000,
+	ixgbe_bus_speed_8000	= 8000,
+	ixgbe_bus_speed_reserved
+};
+
+/* PCI bus widths */
+enum ixgbe_bus_width {
+	ixgbe_bus_width_unknown	= 0,
+	ixgbe_bus_width_pcie_x1	= 1,
+	ixgbe_bus_width_pcie_x2	= 2,
+	ixgbe_bus_width_pcie_x4	= 4,
+	ixgbe_bus_width_pcie_x8	= 8,
+	ixgbe_bus_width_32	= 32,
+	ixgbe_bus_width_64	= 64,
+	ixgbe_bus_width_reserved
+};
+
+struct ixgbe_addr_filter_info {
+	u32 num_mc_addrs;
+	u32 rar_used_count;
+	u32 mta_in_use;
+	u32 overflow_promisc;
+	bool user_set_promisc;
+};
+
+/* Bus parameters */
+struct ixgbe_bus_info {
+	enum ixgbe_bus_speed speed;
+	enum ixgbe_bus_width width;
+	enum ixgbe_bus_type type;
+
+	u16 func;
+	u16 lan_id;
+};
+
+/* Flow control parameters */
+struct ixgbe_fc_info {
+	u32 high_water[IXGBE_DCB_MAX_TRAFFIC_CLASS]; /* Flow Ctrl High-water */
+	u32 low_water[IXGBE_DCB_MAX_TRAFFIC_CLASS]; /* Flow Ctrl Low-water */
+	u16 pause_time; /* Flow Control Pause timer */
+	bool send_xon; /* Flow control send XON */
+	bool strict_ieee; /* Strict IEEE mode */
+	bool disable_fc_autoneg; /* Do not autonegotiate FC */
+	bool fc_was_autonegged; /* Is current_mode the result of autonegging? */
+	enum ixgbe_fc_mode current_mode; /* FC mode in effect */
+	enum ixgbe_fc_mode requested_mode; /* FC mode requested by caller */
+};
+
+/* Statistics counters collected by the MAC */
+struct ixgbe_hw_stats {
+	u64 crcerrs;
+	u64 illerrc;
+	u64 errbc;
+	u64 mspdc;
+	u64 mpctotal;
+	u64 mpc[8];
+	u64 mlfc;
+	u64 mrfc;
+	u64 rlec;
+	u64 lxontxc;
+	u64 lxonrxc;
+	u64 lxofftxc;
+	u64 lxoffrxc;
+	u64 pxontxc[8];
+	u64 pxonrxc[8];
+	u64 pxofftxc[8];
+	u64 pxoffrxc[8];
+	u64 prc64;
+	u64 prc127;
+	u64 prc255;
+	u64 prc511;
+	u64 prc1023;
+	u64 prc1522;
+	u64 gprc;
+	u64 bprc;
+	u64 mprc;
+	u64 gptc;
+	u64 gorc;
+	u64 gotc;
+	u64 rnbc[8];
+	u64 ruc;
+	u64 rfc;
+	u64 roc;
+	u64 rjc;
+	u64 mngprc;
+	u64 mngpdc;
+	u64 mngptc;
+	u64 tor;
+	u64 tpr;
+	u64 tpt;
+	u64 ptc64;
+	u64 ptc127;
+	u64 ptc255;
+	u64 ptc511;
+	u64 ptc1023;
+	u64 ptc1522;
+	u64 mptc;
+	u64 bptc;
+	u64 xec;
+	u64 qprc[16];
+	u64 qptc[16];
+	u64 qbrc[16];
+	u64 qbtc[16];
+	u64 qprdc[16];
+	u64 pxon2offc[8];
+	u64 fdirustat_add;
+	u64 fdirustat_remove;
+	u64 fdirfstat_fadd;
+	u64 fdirfstat_fremove;
+	u64 fdirmatch;
+	u64 fdirmiss;
+	u64 fccrc;
+	u64 fclast;
+	u64 fcoerpdc;
+	u64 fcoeprc;
+	u64 fcoeptc;
+	u64 fcoedwrc;
+	u64 fcoedwtc;
+	u64 fcoe_noddp;
+	u64 fcoe_noddp_ext_buff;
+	u64 ldpcec;
+	u64 pcrc8ec;
+	u64 b2ospc;
+	u64 b2ogprc;
+	u64 o2bgptc;
+	u64 o2bspc;
+};
+
+/* forward declaration */
+struct ixgbe_hw;
+
+/* iterator type for walking multicast address lists */
+typedef u8* (*ixgbe_mc_addr_itr) (struct ixgbe_hw *hw, u8 **mc_addr_ptr,
+				  u32 *vmdq);
+
+/* Function pointer table */
+struct ixgbe_eeprom_operations {
+	s32 (*init_params)(struct ixgbe_hw *);
+	s32 (*read)(struct ixgbe_hw *, u16, u16 *);
+	s32 (*read_buffer)(struct ixgbe_hw *, u16, u16, u16 *);
+	s32 (*write)(struct ixgbe_hw *, u16, u16);
+	s32 (*write_buffer)(struct ixgbe_hw *, u16, u16, u16 *);
+	s32 (*validate_checksum)(struct ixgbe_hw *, u16 *);
+	s32 (*update_checksum)(struct ixgbe_hw *);
+	s32 (*calc_checksum)(struct ixgbe_hw *);
+};
+
+struct ixgbe_mac_operations {
+	s32 (*init_hw)(struct ixgbe_hw *);
+	s32 (*reset_hw)(struct ixgbe_hw *);
+	s32 (*start_hw)(struct ixgbe_hw *);
+	s32 (*clear_hw_cntrs)(struct ixgbe_hw *);
+	void (*enable_relaxed_ordering)(struct ixgbe_hw *);
+	enum ixgbe_media_type (*get_media_type)(struct ixgbe_hw *);
+	u32 (*get_supported_physical_layer)(struct ixgbe_hw *);
+	s32 (*get_mac_addr)(struct ixgbe_hw *, u8 *);
+	s32 (*get_san_mac_addr)(struct ixgbe_hw *, u8 *);
+	s32 (*set_san_mac_addr)(struct ixgbe_hw *, u8 *);
+	s32 (*get_device_caps)(struct ixgbe_hw *, u16 *);
+	s32 (*get_wwn_prefix)(struct ixgbe_hw *, u16 *, u16 *);
+	s32 (*get_fcoe_boot_status)(struct ixgbe_hw *, u16 *);
+	s32 (*stop_adapter)(struct ixgbe_hw *);
+	s32 (*get_bus_info)(struct ixgbe_hw *);
+	void (*set_lan_id)(struct ixgbe_hw *);
+	s32 (*read_analog_reg8)(struct ixgbe_hw*, u32, u8*);
+	s32 (*write_analog_reg8)(struct ixgbe_hw*, u32, u8);
+	s32 (*setup_sfp)(struct ixgbe_hw *);
+	s32 (*enable_rx_dma)(struct ixgbe_hw *, u32);
+	s32 (*disable_sec_rx_path)(struct ixgbe_hw *);
+	s32 (*enable_sec_rx_path)(struct ixgbe_hw *);
+	s32 (*acquire_swfw_sync)(struct ixgbe_hw *, u32);
+	void (*release_swfw_sync)(struct ixgbe_hw *, u32);
+	s32 (*prot_autoc_read)(struct ixgbe_hw *, bool *, u32 *);
+	s32 (*prot_autoc_write)(struct ixgbe_hw *, u32, bool);
+
+	/* Link */
+	void (*disable_tx_laser)(struct ixgbe_hw *);
+	void (*enable_tx_laser)(struct ixgbe_hw *);
+	void (*flap_tx_laser)(struct ixgbe_hw *);
+	s32 (*setup_link)(struct ixgbe_hw *, ixgbe_link_speed, bool);
+	s32 (*setup_mac_link)(struct ixgbe_hw *, ixgbe_link_speed, bool);
+	s32 (*check_link)(struct ixgbe_hw *, ixgbe_link_speed *, bool *, bool);
+	s32 (*get_link_capabilities)(struct ixgbe_hw *, ixgbe_link_speed *,
+				     bool *);
+	void (*set_rate_select_speed)(struct ixgbe_hw *, ixgbe_link_speed);
+
+	/* Packet Buffer manipulation */
+	void (*setup_rxpba)(struct ixgbe_hw *, int, u32, int);
+
+	/* LED */
+	s32 (*led_on)(struct ixgbe_hw *, u32);
+	s32 (*led_off)(struct ixgbe_hw *, u32);
+	s32 (*blink_led_start)(struct ixgbe_hw *, u32);
+	s32 (*blink_led_stop)(struct ixgbe_hw *, u32);
+
+	/* RAR, Multicast, VLAN */
+	s32 (*set_rar)(struct ixgbe_hw *, u32, u8 *, u32, u32);
+	s32 (*set_uc_addr)(struct ixgbe_hw *, u32, u8 *);
+	s32 (*clear_rar)(struct ixgbe_hw *, u32);
+	s32 (*insert_mac_addr)(struct ixgbe_hw *, u8 *, u32);
+	s32 (*set_vmdq)(struct ixgbe_hw *, u32, u32);
+	s32 (*set_vmdq_san_mac)(struct ixgbe_hw *, u32);
+	s32 (*clear_vmdq)(struct ixgbe_hw *, u32, u32);
+	s32 (*init_rx_addrs)(struct ixgbe_hw *);
+	s32 (*update_uc_addr_list)(struct ixgbe_hw *, u8 *, u32,
+				   ixgbe_mc_addr_itr);
+	s32 (*update_mc_addr_list)(struct ixgbe_hw *, u8 *, u32,
+				   ixgbe_mc_addr_itr, bool clear);
+	s32 (*enable_mc)(struct ixgbe_hw *);
+	s32 (*disable_mc)(struct ixgbe_hw *);
+	s32 (*clear_vfta)(struct ixgbe_hw *);
+	s32 (*set_vfta)(struct ixgbe_hw *, u32, u32, bool);
+	s32 (*set_vlvf)(struct ixgbe_hw *, u32, u32, bool, bool *);
+	s32 (*init_uta_tables)(struct ixgbe_hw *);
+	void (*set_mac_anti_spoofing)(struct ixgbe_hw *, bool, int);
+	void (*set_vlan_anti_spoofing)(struct ixgbe_hw *, bool, int);
+
+	/* Flow Control */
+	s32 (*fc_enable)(struct ixgbe_hw *);
+	s32 (*setup_fc)(struct ixgbe_hw *);
+
+	/* Manageability interface */
+	s32 (*set_fw_drv_ver)(struct ixgbe_hw *, u8, u8, u8, u8);
+	s32 (*get_thermal_sensor_data)(struct ixgbe_hw *);
+	s32 (*init_thermal_sensor_thresh)(struct ixgbe_hw *hw);
+	void (*get_rtrup2tc)(struct ixgbe_hw *hw, u8 *map);
+	void (*disable_rx)(struct ixgbe_hw *hw);
+	void (*enable_rx)(struct ixgbe_hw *hw);
+	void (*set_source_address_pruning)(struct ixgbe_hw *, bool,
+					   unsigned int);
+	void (*set_ethertype_anti_spoofing)(struct ixgbe_hw *, bool, int);
+	s32 (*dmac_update_tcs)(struct ixgbe_hw *hw);
+	s32 (*dmac_config_tcs)(struct ixgbe_hw *hw);
+	s32 (*dmac_config)(struct ixgbe_hw *hw);
+	s32 (*setup_eee)(struct ixgbe_hw *hw, bool enable_eee);
+	s32 (*read_iosf_sb_reg)(struct ixgbe_hw *, u32, u32, u32 *);
+	s32 (*write_iosf_sb_reg)(struct ixgbe_hw *, u32, u32, u32);
+	void (*disable_mdd)(struct ixgbe_hw *hw);
+	void (*enable_mdd)(struct ixgbe_hw *hw);
+	void (*mdd_event)(struct ixgbe_hw *hw, u32 *vf_bitmap);
+	void (*restore_mdd_vf)(struct ixgbe_hw *hw, u32 vf);
+};
+
+struct ixgbe_phy_operations {
+	s32 (*identify)(struct ixgbe_hw *);
+	s32 (*identify_sfp)(struct ixgbe_hw *);
+	s32 (*init)(struct ixgbe_hw *);
+	s32 (*reset)(struct ixgbe_hw *);
+	s32 (*read_reg)(struct ixgbe_hw *, u32, u32, u16 *);
+	s32 (*write_reg)(struct ixgbe_hw *, u32, u32, u16);
+	s32 (*read_reg_mdi)(struct ixgbe_hw *, u32, u32, u16 *);
+	s32 (*write_reg_mdi)(struct ixgbe_hw *, u32, u32, u16);
+	s32 (*setup_link)(struct ixgbe_hw *);
+	s32 (*setup_internal_link)(struct ixgbe_hw *);
+	s32 (*setup_link_speed)(struct ixgbe_hw *, ixgbe_link_speed, bool);
+	s32 (*check_link)(struct ixgbe_hw *, ixgbe_link_speed *, bool *);
+	s32 (*get_firmware_version)(struct ixgbe_hw *, u16 *);
+	s32 (*read_i2c_byte)(struct ixgbe_hw *, u8, u8, u8 *);
+	s32 (*write_i2c_byte)(struct ixgbe_hw *, u8, u8, u8);
+	s32 (*read_i2c_sff8472)(struct ixgbe_hw *, u8 , u8 *);
+	s32 (*read_i2c_eeprom)(struct ixgbe_hw *, u8 , u8 *);
+	s32 (*write_i2c_eeprom)(struct ixgbe_hw *, u8, u8);
+	void (*i2c_bus_clear)(struct ixgbe_hw *);
+	s32 (*check_overtemp)(struct ixgbe_hw *);
+	s32 (*set_phy_power)(struct ixgbe_hw *, bool on);
+	s32 (*enter_lplu)(struct ixgbe_hw *);
+	s32 (*handle_lasi)(struct ixgbe_hw *hw);
+	s32 (*read_i2c_byte_unlocked)(struct ixgbe_hw *, u8 offset, u8 addr,
+				      u8 *value);
+	s32 (*write_i2c_byte_unlocked)(struct ixgbe_hw *, u8 offset, u8 addr,
+				       u8 value);
+};
+
+struct ixgbe_link_operations {
+	s32 (*read_link)(struct ixgbe_hw *, u8 addr, u16 reg, u16 *val);
+	s32 (*read_link_unlocked)(struct ixgbe_hw *, u8 addr, u16 reg,
+				  u16 *val);
+	s32 (*write_link)(struct ixgbe_hw *, u8 addr, u16 reg, u16 val);
+	s32 (*write_link_unlocked)(struct ixgbe_hw *, u8 addr, u16 reg,
+				   u16 val);
+};
+
+struct ixgbe_link_info {
+	struct ixgbe_link_operations ops;
+	u8 addr;
+};
+
+struct ixgbe_eeprom_info {
+	struct ixgbe_eeprom_operations ops;
+	enum ixgbe_eeprom_type type;
+	u32 semaphore_delay;
+	u16 word_size;
+	u16 address_bits;
+	u16 word_page_size;
+	u16 ctrl_word_3;
+};
+
+#define IXGBE_FLAGS_DOUBLE_RESET_REQUIRED	0x01
+struct ixgbe_mac_info {
+	struct ixgbe_mac_operations ops;
+	enum ixgbe_mac_type type;
+	u8 addr[IXGBE_ETH_LENGTH_OF_ADDRESS];
+	u8 perm_addr[IXGBE_ETH_LENGTH_OF_ADDRESS];
+	u8 san_addr[IXGBE_ETH_LENGTH_OF_ADDRESS];
+	/* prefix for World Wide Node Name (WWNN) */
+	u16 wwnn_prefix;
+	/* prefix for World Wide Port Name (WWPN) */
+	u16 wwpn_prefix;
+#define IXGBE_MAX_MTA			128
+	u32 mta_shadow[IXGBE_MAX_MTA];
+	s32 mc_filter_type;
+	u32 mcft_size;
+	u32 vft_size;
+	u32 num_rar_entries;
+	u32 rar_highwater;
+	u32 rx_pb_size;
+	u32 max_tx_queues;
+	u32 max_rx_queues;
+	u32 orig_autoc;
+	u8  san_mac_rar_index;
+	bool get_link_status;
+	u32 orig_autoc2;
+	u16 max_msix_vectors;
+	bool arc_subsystem_valid;
+	bool orig_link_settings_stored;
+	bool autotry_restart;
+	u8 flags;
+	struct ixgbe_thermal_sensor_data  thermal_sensor_data;
+	bool thermal_sensor_enabled;
+	struct ixgbe_dmac_config dmac_config;
+	bool set_lben;
+	u32  max_link_up_time;
+};
+
+struct ixgbe_phy_info {
+	struct ixgbe_phy_operations ops;
+	enum ixgbe_phy_type type;
+	u32 addr;
+	u32 id;
+	enum ixgbe_sfp_type sfp_type;
+	bool sfp_setup_needed;
+	u32 revision;
+	enum ixgbe_media_type media_type;
+	u32 phy_semaphore_mask;
+	bool reset_disable;
+	ixgbe_autoneg_advertised autoneg_advertised;
+	ixgbe_link_speed speeds_supported;
+	enum ixgbe_smart_speed smart_speed;
+	bool smart_speed_active;
+	bool multispeed_fiber;
+	bool reset_if_overtemp;
+	bool qsfp_shared_i2c_bus;
+	u32 nw_mng_if_sel;
+};
+
+#include "ixgbe_mbx.h"
+
+struct ixgbe_mbx_operations {
+	void (*init_params)(struct ixgbe_hw *hw);
+	s32  (*read)(struct ixgbe_hw *, u32 *, u16,  u16);
+	s32  (*write)(struct ixgbe_hw *, u32 *, u16, u16);
+	s32  (*read_posted)(struct ixgbe_hw *, u32 *, u16,  u16);
+	s32  (*write_posted)(struct ixgbe_hw *, u32 *, u16, u16);
+	s32  (*check_for_msg)(struct ixgbe_hw *, u16);
+	s32  (*check_for_ack)(struct ixgbe_hw *, u16);
+	s32  (*check_for_rst)(struct ixgbe_hw *, u16);
+};
+
+struct ixgbe_mbx_stats {
+	u32 msgs_tx;
+	u32 msgs_rx;
+
+	u32 acks;
+	u32 reqs;
+	u32 rsts;
+};
+
+struct ixgbe_mbx_info {
+	struct ixgbe_mbx_operations ops;
+	struct ixgbe_mbx_stats stats;
+	u32 timeout;
+	u32 usec_delay;
+	u32 v2p_mailbox;
+	u16 size;
+};
+
+struct ixgbe_hw {
+	u8 IOMEM *hw_addr;
+	void *back;
+	struct ixgbe_mac_info mac;
+	struct ixgbe_addr_filter_info addr_ctrl;
+	struct ixgbe_fc_info fc;
+	struct ixgbe_phy_info phy;
+	struct ixgbe_link_info link;
+	struct ixgbe_eeprom_info eeprom;
+	struct ixgbe_bus_info bus;
+	struct ixgbe_mbx_info mbx;
+	const u32 *mvals;
+	u16 device_id;
+	u16 vendor_id;
+	u16 subsystem_device_id;
+	u16 subsystem_vendor_id;
+	u8 revision_id;
+	bool adapter_stopped;
+	int api_version;
+	bool force_full_reset;
+	bool allow_unsupported_sfp;
+	bool wol_enabled;
+};
+
+#define ixgbe_call_func(hw, func, params, error) \
+		(func != NULL) ? func params : error
+
+
+/* Error Codes */
+#define IXGBE_SUCCESS				0
+#define IXGBE_ERR_EEPROM			-1
+#define IXGBE_ERR_EEPROM_CHECKSUM		-2
+#define IXGBE_ERR_PHY				-3
+#define IXGBE_ERR_CONFIG			-4
+#define IXGBE_ERR_PARAM				-5
+#define IXGBE_ERR_MAC_TYPE			-6
+#define IXGBE_ERR_UNKNOWN_PHY			-7
+#define IXGBE_ERR_LINK_SETUP			-8
+#define IXGBE_ERR_ADAPTER_STOPPED		-9
+#define IXGBE_ERR_INVALID_MAC_ADDR		-10
+#define IXGBE_ERR_DEVICE_NOT_SUPPORTED		-11
+#define IXGBE_ERR_MASTER_REQUESTS_PENDING	-12
+#define IXGBE_ERR_INVALID_LINK_SETTINGS		-13
+#define IXGBE_ERR_AUTONEG_NOT_COMPLETE		-14
+#define IXGBE_ERR_RESET_FAILED			-15
+#define IXGBE_ERR_SWFW_SYNC			-16
+#define IXGBE_ERR_PHY_ADDR_INVALID		-17
+#define IXGBE_ERR_I2C				-18
+#define IXGBE_ERR_SFP_NOT_SUPPORTED		-19
+#define IXGBE_ERR_SFP_NOT_PRESENT		-20
+#define IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT	-21
+#define IXGBE_ERR_NO_SAN_ADDR_PTR		-22
+#define IXGBE_ERR_FDIR_REINIT_FAILED		-23
+#define IXGBE_ERR_EEPROM_VERSION		-24
+#define IXGBE_ERR_NO_SPACE			-25
+#define IXGBE_ERR_OVERTEMP			-26
+#define IXGBE_ERR_FC_NOT_NEGOTIATED		-27
+#define IXGBE_ERR_FC_NOT_SUPPORTED		-28
+#define IXGBE_ERR_SFP_SETUP_NOT_COMPLETE	-30
+#define IXGBE_ERR_PBA_SECTION			-31
+#define IXGBE_ERR_INVALID_ARGUMENT		-32
+#define IXGBE_ERR_HOST_INTERFACE_COMMAND	-33
+#define IXGBE_ERR_OUT_OF_MEM			-34
+#define IXGBE_ERR_FEATURE_NOT_SUPPORTED		-36
+#define IXGBE_ERR_EEPROM_PROTECTED_REGION	-37
+#define IXGBE_ERR_FDIR_CMD_INCOMPLETE		-38
+#define IXGBE_ERR_FW_RESP_INVALID		-39
+#define IXGBE_ERR_TOKEN_RETRY			-40
+
+#define IXGBE_NOT_IMPLEMENTED			0x7FFFFFFF
+
+
+#define IXGBE_FUSES0_GROUP(_i)		(0x11158 + ((_i) * 4))
+#define IXGBE_FUSES0_300MHZ		(1 << 5)
+#define IXGBE_FUSES0_REV_MASK		(3 << 6)
+
+#define IXGBE_KRM_PORT_CAR_GEN_CTRL(P)	((P) ? 0x8010 : 0x4010)
+#define IXGBE_KRM_LINK_CTRL_1(P)	((P) ? 0x820C : 0x420C)
+#define IXGBE_KRM_AN_CNTL_1(P)		((P) ? 0x822C : 0x422C)
+#define IXGBE_KRM_DSP_TXFFE_STATE_4(P)	((P) ? 0x8634 : 0x4634)
+#define IXGBE_KRM_DSP_TXFFE_STATE_5(P)	((P) ? 0x8638 : 0x4638)
+#define IXGBE_KRM_RX_TRN_LINKUP_CTRL(P)	((P) ? 0x8B00 : 0x4B00)
+#define IXGBE_KRM_PMD_DFX_BURNIN(P)	((P) ? 0x8E00 : 0x4E00)
+#define IXGBE_KRM_TX_COEFF_CTRL_1(P)	((P) ? 0x9520 : 0x5520)
+#define IXGBE_KRM_RX_ANA_CTL(P)		((P) ? 0x9A00 : 0x5A00)
+
+#define IXGBE_KRM_PORT_CAR_GEN_CTRL_NELB_32B		(1 << 9)
+#define IXGBE_KRM_PORT_CAR_GEN_CTRL_NELB_KRPCS		(1 << 11)
+
+#define IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK	(0x7 << 8)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G	(2 << 8)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_10G	(4 << 8)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_AN_FEC_REQ		(1 << 14)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_FEC		(1 << 15)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX		(1 << 16)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR		(1 << 18)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KX		(1 << 24)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KR		(1 << 26)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE		(1 << 29)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART		(1 << 31)
+
+#define IXGBE_KRM_AN_CNTL_1_SYM_PAUSE			(1 << 28)
+#define IXGBE_KRM_AN_CNTL_1_ASM_PAUSE			(1 << 29)
+
+#define IXGBE_KRM_DSP_TXFFE_STATE_C0_EN			(1 << 6)
+#define IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN		(1 << 15)
+#define IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN		(1 << 16)
+
+#define IXGBE_KRM_RX_TRN_LINKUP_CTRL_CONV_WO_PROTOCOL	(1 << 4)
+#define IXGBE_KRM_RX_TRN_LINKUP_CTRL_PROTOCOL_BYPASS	(1 << 2)
+
+#define IXGBE_KRM_PMD_DFX_BURNIN_TX_RX_KR_LB_MASK	(0x3 << 16)
+
+#define IXGBE_KRM_TX_COEFF_CTRL_1_CMINUS1_OVRRD_EN	(1 << 1)
+#define IXGBE_KRM_TX_COEFF_CTRL_1_CPLUS1_OVRRD_EN	(1 << 2)
+#define IXGBE_KRM_TX_COEFF_CTRL_1_CZERO_EN		(1 << 3)
+#define IXGBE_KRM_TX_COEFF_CTRL_1_OVRRD_EN		(1 << 31)
+
+#define IXGBE_SB_IOSF_INDIRECT_CTRL	0x00011144
+#define IXGBE_SB_IOSF_INDIRECT_DATA	0x00011148
+
+#define IXGBE_SB_IOSF_CTRL_ADDR_SHIFT		0
+#define IXGBE_SB_IOSF_CTRL_ADDR_MASK		0xFF
+#define IXGBE_SB_IOSF_CTRL_RESP_STAT_SHIFT	18
+#define IXGBE_SB_IOSF_CTRL_RESP_STAT_MASK	\
+				(0x3 << IXGBE_SB_IOSF_CTRL_RESP_STAT_SHIFT)
+#define IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT	20
+#define IXGBE_SB_IOSF_CTRL_CMPL_ERR_MASK	\
+				(0xFF << IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT)
+#define IXGBE_SB_IOSF_CTRL_TARGET_SELECT_SHIFT	28
+#define IXGBE_SB_IOSF_CTRL_TARGET_SELECT_MASK	0x7
+#define IXGBE_SB_IOSF_CTRL_BUSY_SHIFT		31
+#define IXGBE_SB_IOSF_CTRL_BUSY		(1 << IXGBE_SB_IOSF_CTRL_BUSY_SHIFT)
+#define IXGBE_SB_IOSF_TARGET_KR_PHY	0
+
+#define IXGBE_NW_MNG_IF_SEL		0x00011178
+#define IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE (1 << 24)
+
+#endif /* _IXGBE_TYPE_H_ */
diff --git a/drivers/net/ixgbe/base/ixgbe_vf.c b/drivers/net/ixgbe/base/ixgbe_vf.c
new file mode 100644
index 00000000..40dc1c8c
--- /dev/null
+++ b/drivers/net/ixgbe/base/ixgbe_vf.c
@@ -0,0 +1,726 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+    this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in the
+    documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+    contributors may be used to endorse or promote products derived from
+    this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+
+#include "ixgbe_api.h"
+#include "ixgbe_type.h"
+#include "ixgbe_vf.h"
+
+#ifndef IXGBE_VFWRITE_REG
+#define IXGBE_VFWRITE_REG IXGBE_WRITE_REG
+#endif
+#ifndef IXGBE_VFREAD_REG
+#define IXGBE_VFREAD_REG IXGBE_READ_REG
+#endif
+
+/**
+ *  ixgbe_init_ops_vf - Initialize the pointers for vf
+ *  @hw: pointer to hardware structure
+ *
+ *  This will assign function pointers, adapter-specific functions can
+ *  override the assignment of generic function pointers by assigning
+ *  their own adapter-specific function pointers.
+ *  Does not touch the hardware.
+ **/
+s32 ixgbe_init_ops_vf(struct ixgbe_hw *hw)
+{
+	/* MAC */
+	hw->mac.ops.init_hw = ixgbe_init_hw_vf;
+	hw->mac.ops.reset_hw = ixgbe_reset_hw_vf;
+	hw->mac.ops.start_hw = ixgbe_start_hw_vf;
+	/* Cannot clear stats on VF */
+	hw->mac.ops.clear_hw_cntrs = NULL;
+	hw->mac.ops.get_media_type = NULL;
+	hw->mac.ops.get_mac_addr = ixgbe_get_mac_addr_vf;
+	hw->mac.ops.stop_adapter = ixgbe_stop_adapter_vf;
+	hw->mac.ops.get_bus_info = NULL;
+
+	/* Link */
+	hw->mac.ops.setup_link = ixgbe_setup_mac_link_vf;
+	hw->mac.ops.check_link = ixgbe_check_mac_link_vf;
+	hw->mac.ops.get_link_capabilities = NULL;
+
+	/* RAR, Multicast, VLAN */
+	hw->mac.ops.set_rar = ixgbe_set_rar_vf;
+	hw->mac.ops.set_uc_addr = ixgbevf_set_uc_addr_vf;
+	hw->mac.ops.init_rx_addrs = NULL;
+	hw->mac.ops.update_mc_addr_list = ixgbe_update_mc_addr_list_vf;
+	hw->mac.ops.enable_mc = NULL;
+	hw->mac.ops.disable_mc = NULL;
+	hw->mac.ops.clear_vfta = NULL;
+	hw->mac.ops.set_vfta = ixgbe_set_vfta_vf;
+
+	hw->mac.max_tx_queues = 1;
+	hw->mac.max_rx_queues = 1;
+
+	hw->mbx.ops.init_params = ixgbe_init_mbx_params_vf;
+
+	return IXGBE_SUCCESS;
+}
+
+/* ixgbe_virt_clr_reg - Set register to default (power on) state.
+ *  @hw: pointer to hardware structure
+ */
+static void ixgbe_virt_clr_reg(struct ixgbe_hw *hw)
+{
+	int i;
+	u32 vfsrrctl;
+	u32 vfdca_rxctrl;
+	u32 vfdca_txctrl;
+
+	/* VRSRRCTL default values (BSIZEPACKET = 2048, BSIZEHEADER = 256) */
+	vfsrrctl = 0x100 << IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT;
+	vfsrrctl |= 0x800 >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
+
+	/* DCA_RXCTRL default value */
+	vfdca_rxctrl = IXGBE_DCA_RXCTRL_DESC_RRO_EN |
+		       IXGBE_DCA_RXCTRL_DATA_WRO_EN |
+		       IXGBE_DCA_RXCTRL_HEAD_WRO_EN;
+
+	/* DCA_TXCTRL default value */
+	vfdca_txctrl = IXGBE_DCA_TXCTRL_DESC_RRO_EN |
+		       IXGBE_DCA_TXCTRL_DESC_WRO_EN |
+		       IXGBE_DCA_TXCTRL_DATA_RRO_EN;
+
+	IXGBE_WRITE_REG(hw, IXGBE_VFPSRTYPE, 0);
+
+	for (i = 0; i < 7; i++) {
+		IXGBE_WRITE_REG(hw, IXGBE_VFRDH(i), 0);
+		IXGBE_WRITE_REG(hw, IXGBE_VFRDT(i), 0);
+		IXGBE_WRITE_REG(hw, IXGBE_VFRXDCTL(i), 0);
+		IXGBE_WRITE_REG(hw, IXGBE_VFSRRCTL(i), vfsrrctl);
+		IXGBE_WRITE_REG(hw, IXGBE_VFTDH(i), 0);
+		IXGBE_WRITE_REG(hw, IXGBE_VFTDT(i), 0);
+		IXGBE_WRITE_REG(hw, IXGBE_VFTXDCTL(i), 0);
+		IXGBE_WRITE_REG(hw, IXGBE_VFTDWBAH(i), 0);
+		IXGBE_WRITE_REG(hw, IXGBE_VFTDWBAL(i), 0);
+		IXGBE_WRITE_REG(hw, IXGBE_VFDCA_RXCTRL(i), vfdca_rxctrl);
+		IXGBE_WRITE_REG(hw, IXGBE_VFDCA_TXCTRL(i), vfdca_txctrl);
+	}
+
+	IXGBE_WRITE_FLUSH(hw);
+}
+
+/**
+ *  ixgbe_start_hw_vf - Prepare hardware for Tx/Rx
+ *  @hw: pointer to hardware structure
+ *
+ *  Starts the hardware by filling the bus info structure and media type, clears
+ *  all on chip counters, initializes receive address registers, multicast
+ *  table, VLAN filter table, calls routine to set up link and flow control
+ *  settings, and leaves transmit and receive units disabled and uninitialized
+ **/
+s32 ixgbe_start_hw_vf(struct ixgbe_hw *hw)
+{
+	/* Clear adapter stopped flag */
+	hw->adapter_stopped = false;
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_init_hw_vf - virtual function hardware initialization
+ *  @hw: pointer to hardware structure
+ *
+ *  Initialize the hardware by resetting the hardware and then starting
+ *  the hardware
+ **/
+s32 ixgbe_init_hw_vf(struct ixgbe_hw *hw)
+{
+	s32 status = hw->mac.ops.start_hw(hw);
+
+	hw->mac.ops.get_mac_addr(hw, hw->mac.addr);
+
+	return status;
+}
+
+/**
+ *  ixgbe_reset_hw_vf - Performs hardware reset
+ *  @hw: pointer to hardware structure
+ *
+ *  Resets the hardware by reseting the transmit and receive units, masks and
+ *  clears all interrupts.
+ **/
+s32 ixgbe_reset_hw_vf(struct ixgbe_hw *hw)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+	u32 timeout = IXGBE_VF_INIT_TIMEOUT;
+	s32 ret_val = IXGBE_ERR_INVALID_MAC_ADDR;
+	u32 msgbuf[IXGBE_VF_PERMADDR_MSG_LEN];
+	u8 *addr = (u8 *)(&msgbuf[1]);
+
+	DEBUGFUNC("ixgbevf_reset_hw_vf");
+
+	/* Call adapter stop to disable tx/rx and clear interrupts */
+	hw->mac.ops.stop_adapter(hw);
+
+	/* reset the api version */
+	hw->api_version = ixgbe_mbox_api_10;
+
+	DEBUGOUT("Issuing a function level reset to MAC\n");
+
+	IXGBE_VFWRITE_REG(hw, IXGBE_VFCTRL, IXGBE_CTRL_RST);
+	IXGBE_WRITE_FLUSH(hw);
+
+	msec_delay(50);
+
+	/* we cannot reset while the RSTI / RSTD bits are asserted */
+	while (!mbx->ops.check_for_rst(hw, 0) && timeout) {
+		timeout--;
+		usec_delay(5);
+	}
+
+	if (!timeout)
+		return IXGBE_ERR_RESET_FAILED;
+
+	/* Reset VF registers to initial values */
+	ixgbe_virt_clr_reg(hw);
+
+	/* mailbox timeout can now become active */
+	mbx->timeout = IXGBE_VF_MBX_INIT_TIMEOUT;
+
+	msgbuf[0] = IXGBE_VF_RESET;
+	mbx->ops.write_posted(hw, msgbuf, 1, 0);
+
+	msec_delay(10);
+
+	/*
+	 * set our "perm_addr" based on info provided by PF
+	 * also set up the mc_filter_type which is piggy backed
+	 * on the mac address in word 3
+	 */
+	ret_val = mbx->ops.read_posted(hw, msgbuf,
+			IXGBE_VF_PERMADDR_MSG_LEN, 0);
+	if (ret_val)
+		return ret_val;
+
+	if (msgbuf[0] != (IXGBE_VF_RESET | IXGBE_VT_MSGTYPE_ACK) &&
+	    msgbuf[0] != (IXGBE_VF_RESET | IXGBE_VT_MSGTYPE_NACK))
+		return IXGBE_ERR_INVALID_MAC_ADDR;
+
+	if (msgbuf[0] == (IXGBE_VF_RESET | IXGBE_VT_MSGTYPE_ACK))
+		memcpy(hw->mac.perm_addr, addr, IXGBE_ETH_LENGTH_OF_ADDRESS);
+
+	hw->mac.mc_filter_type = msgbuf[IXGBE_VF_MC_TYPE_WORD];
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_stop_adapter_vf - Generic stop Tx/Rx units
+ *  @hw: pointer to hardware structure
+ *
+ *  Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts,
+ *  disables transmit and receive units. The adapter_stopped flag is used by
+ *  the shared code and drivers to determine if the adapter is in a stopped
+ *  state and should not touch the hardware.
+ **/
+s32 ixgbe_stop_adapter_vf(struct ixgbe_hw *hw)
+{
+	u32 reg_val;
+	u16 i;
+
+	/*
+	 * Set the adapter_stopped flag so other driver functions stop touching
+	 * the hardware
+	 */
+	hw->adapter_stopped = true;
+
+	/* Clear interrupt mask to stop from interrupts being generated */
+	IXGBE_VFWRITE_REG(hw, IXGBE_VTEIMC, IXGBE_VF_IRQ_CLEAR_MASK);
+
+	/* Clear any pending interrupts, flush previous writes */
+	IXGBE_VFREAD_REG(hw, IXGBE_VTEICR);
+
+	/* Disable the transmit unit.  Each queue must be disabled. */
+	for (i = 0; i < hw->mac.max_tx_queues; i++)
+		IXGBE_VFWRITE_REG(hw, IXGBE_VFTXDCTL(i), IXGBE_TXDCTL_SWFLSH);
+
+	/* Disable the receive unit by stopping each queue */
+	for (i = 0; i < hw->mac.max_rx_queues; i++) {
+		reg_val = IXGBE_VFREAD_REG(hw, IXGBE_VFRXDCTL(i));
+		reg_val &= ~IXGBE_RXDCTL_ENABLE;
+		IXGBE_VFWRITE_REG(hw, IXGBE_VFRXDCTL(i), reg_val);
+	}
+	/* Clear packet split and pool config */
+	IXGBE_WRITE_REG(hw, IXGBE_VFPSRTYPE, 0);
+
+	/* flush all queues disables */
+	IXGBE_WRITE_FLUSH(hw);
+	msec_delay(2);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_mta_vector - Determines bit-vector in multicast table to set
+ *  @hw: pointer to hardware structure
+ *  @mc_addr: the multicast address
+ *
+ *  Extracts the 12 bits, from a multicast address, to determine which
+ *  bit-vector to set in the multicast table. The hardware uses 12 bits, from
+ *  incoming rx multicast addresses, to determine the bit-vector to check in
+ *  the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set
+ *  by the MO field of the MCSTCTRL. The MO field is set during initialization
+ *  to mc_filter_type.
+ **/
+STATIC s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr)
+{
+	u32 vector = 0;
+
+	switch (hw->mac.mc_filter_type) {
+	case 0:   /* use bits [47:36] of the address */
+		vector = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4));
+		break;
+	case 1:   /* use bits [46:35] of the address */
+		vector = ((mc_addr[4] >> 3) | (((u16)mc_addr[5]) << 5));
+		break;
+	case 2:   /* use bits [45:34] of the address */
+		vector = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6));
+		break;
+	case 3:   /* use bits [43:32] of the address */
+		vector = ((mc_addr[4]) | (((u16)mc_addr[5]) << 8));
+		break;
+	default:  /* Invalid mc_filter_type */
+		DEBUGOUT("MC filter type param set incorrectly\n");
+		ASSERT(0);
+		break;
+	}
+
+	/* vector can only be 12-bits or boundary will be exceeded */
+	vector &= 0xFFF;
+	return vector;
+}
+
+STATIC void ixgbevf_write_msg_read_ack(struct ixgbe_hw *hw,
+					u32 *msg, u16 size)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+	u32 retmsg[IXGBE_VFMAILBOX_SIZE];
+	s32 retval = mbx->ops.write_posted(hw, msg, size, 0);
+
+	if (!retval)
+		mbx->ops.read_posted(hw, retmsg, size, 0);
+}
+
+/**
+ *  ixgbe_set_rar_vf - set device MAC address
+ *  @hw: pointer to hardware structure
+ *  @index: Receive address register to write
+ *  @addr: Address to put into receive address register
+ *  @vmdq: VMDq "set" or "pool" index
+ *  @enable_addr: set flag that address is active
+ **/
+s32 ixgbe_set_rar_vf(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
+		     u32 enable_addr)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+	u32 msgbuf[3];
+	u8 *msg_addr = (u8 *)(&msgbuf[1]);
+	s32 ret_val;
+	UNREFERENCED_3PARAMETER(vmdq, enable_addr, index);
+
+	memset(msgbuf, 0, 12);
+	msgbuf[0] = IXGBE_VF_SET_MAC_ADDR;
+	memcpy(msg_addr, addr, 6);
+	ret_val = mbx->ops.write_posted(hw, msgbuf, 3, 0);
+
+	if (!ret_val)
+		ret_val = mbx->ops.read_posted(hw, msgbuf, 3, 0);
+
+	msgbuf[0] &= ~IXGBE_VT_MSGTYPE_CTS;
+
+	/* if nacked the address was rejected, use "perm_addr" */
+	if (!ret_val &&
+	    (msgbuf[0] == (IXGBE_VF_SET_MAC_ADDR | IXGBE_VT_MSGTYPE_NACK)))
+		ixgbe_get_mac_addr_vf(hw, hw->mac.addr);
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_update_mc_addr_list_vf - Update Multicast addresses
+ *  @hw: pointer to the HW structure
+ *  @mc_addr_list: array of multicast addresses to program
+ *  @mc_addr_count: number of multicast addresses to program
+ *  @next: caller supplied function to return next address in list
+ *
+ *  Updates the Multicast Table Array.
+ **/
+s32 ixgbe_update_mc_addr_list_vf(struct ixgbe_hw *hw, u8 *mc_addr_list,
+				 u32 mc_addr_count, ixgbe_mc_addr_itr next,
+				 bool clear)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+	u32 msgbuf[IXGBE_VFMAILBOX_SIZE];
+	u16 *vector_list = (u16 *)&msgbuf[1];
+	u32 vector;
+	u32 cnt, i;
+	u32 vmdq;
+
+	UNREFERENCED_1PARAMETER(clear);
+
+	DEBUGFUNC("ixgbe_update_mc_addr_list_vf");
+
+	/* Each entry in the list uses 1 16 bit word.  We have 30
+	 * 16 bit words available in our HW msg buffer (minus 1 for the
+	 * msg type).  That's 30 hash values if we pack 'em right.  If
+	 * there are more than 30 MC addresses to add then punt the
+	 * extras for now and then add code to handle more than 30 later.
+	 * It would be unusual for a server to request that many multi-cast
+	 * addresses except for in large enterprise network environments.
+	 */
+
+	DEBUGOUT1("MC Addr Count = %d\n", mc_addr_count);
+
+	cnt = (mc_addr_count > 30) ? 30 : mc_addr_count;
+	msgbuf[0] = IXGBE_VF_SET_MULTICAST;
+	msgbuf[0] |= cnt << IXGBE_VT_MSGINFO_SHIFT;
+
+	for (i = 0; i < cnt; i++) {
+		vector = ixgbe_mta_vector(hw, next(hw, &mc_addr_list, &vmdq));
+		DEBUGOUT1("Hash value = 0x%03X\n", vector);
+		vector_list[i] = (u16)vector;
+	}
+
+	return mbx->ops.write_posted(hw, msgbuf, IXGBE_VFMAILBOX_SIZE, 0);
+}
+
+/**
+ *  ixgbe_set_vfta_vf - Set/Unset vlan filter table address
+ *  @hw: pointer to the HW structure
+ *  @vlan: 12 bit VLAN ID
+ *  @vind: unused by VF drivers
+ *  @vlan_on: if true then set bit, else clear bit
+ **/
+s32 ixgbe_set_vfta_vf(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+	u32 msgbuf[2];
+	s32 ret_val;
+	UNREFERENCED_1PARAMETER(vind);
+
+	msgbuf[0] = IXGBE_VF_SET_VLAN;
+	msgbuf[1] = vlan;
+	/* Setting the 8 bit field MSG INFO to TRUE indicates "add" */
+	msgbuf[0] |= vlan_on << IXGBE_VT_MSGINFO_SHIFT;
+
+	ret_val = mbx->ops.write_posted(hw, msgbuf, 2, 0);
+	if (!ret_val)
+		ret_val = mbx->ops.read_posted(hw, msgbuf, 1, 0);
+
+	if (!ret_val && (msgbuf[0] & IXGBE_VT_MSGTYPE_ACK))
+		return IXGBE_SUCCESS;
+
+	return ret_val | (msgbuf[0] & IXGBE_VT_MSGTYPE_NACK);
+}
+
+/**
+ *  ixgbe_get_num_of_tx_queues_vf - Get number of TX queues
+ *  @hw: pointer to hardware structure
+ *
+ *  Returns the number of transmit queues for the given adapter.
+ **/
+u32 ixgbe_get_num_of_tx_queues_vf(struct ixgbe_hw *hw)
+{
+	UNREFERENCED_1PARAMETER(hw);
+	return IXGBE_VF_MAX_TX_QUEUES;
+}
+
+/**
+ *  ixgbe_get_num_of_rx_queues_vf - Get number of RX queues
+ *  @hw: pointer to hardware structure
+ *
+ *  Returns the number of receive queues for the given adapter.
+ **/
+u32 ixgbe_get_num_of_rx_queues_vf(struct ixgbe_hw *hw)
+{
+	UNREFERENCED_1PARAMETER(hw);
+	return IXGBE_VF_MAX_RX_QUEUES;
+}
+
+/**
+ *  ixgbe_get_mac_addr_vf - Read device MAC address
+ *  @hw: pointer to the HW structure
+ **/
+s32 ixgbe_get_mac_addr_vf(struct ixgbe_hw *hw, u8 *mac_addr)
+{
+	int i;
+
+	for (i = 0; i < IXGBE_ETH_LENGTH_OF_ADDRESS; i++)
+		mac_addr[i] = hw->mac.perm_addr[i];
+
+	return IXGBE_SUCCESS;
+}
+
+s32 ixgbevf_set_uc_addr_vf(struct ixgbe_hw *hw, u32 index, u8 *addr)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+	u32 msgbuf[3];
+	u8 *msg_addr = (u8 *)(&msgbuf[1]);
+	s32 ret_val;
+
+	memset(msgbuf, 0, sizeof(msgbuf));
+	/*
+	 * If index is one then this is the start of a new list and needs
+	 * indication to the PF so it can do it's own list management.
+	 * If it is zero then that tells the PF to just clear all of
+	 * this VF's macvlans and there is no new list.
+	 */
+	msgbuf[0] |= index << IXGBE_VT_MSGINFO_SHIFT;
+	msgbuf[0] |= IXGBE_VF_SET_MACVLAN;
+	if (addr)
+		memcpy(msg_addr, addr, 6);
+	ret_val = mbx->ops.write_posted(hw, msgbuf, 3, 0);
+
+	if (!ret_val)
+		ret_val = mbx->ops.read_posted(hw, msgbuf, 3, 0);
+
+	msgbuf[0] &= ~IXGBE_VT_MSGTYPE_CTS;
+
+	if (!ret_val)
+		if (msgbuf[0] == (IXGBE_VF_SET_MACVLAN | IXGBE_VT_MSGTYPE_NACK))
+			ret_val = IXGBE_ERR_OUT_OF_MEM;
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_setup_mac_link_vf - Setup MAC link settings
+ *  @hw: pointer to hardware structure
+ *  @speed: new link speed
+ *  @autoneg: true if autonegotiation enabled
+ *  @autoneg_wait_to_complete: true when waiting for completion is needed
+ *
+ *  Set the link speed in the AUTOC register and restarts link.
+ **/
+s32 ixgbe_setup_mac_link_vf(struct ixgbe_hw *hw, ixgbe_link_speed speed,
+			    bool autoneg_wait_to_complete)
+{
+	UNREFERENCED_3PARAMETER(hw, speed, autoneg_wait_to_complete);
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_check_mac_link_vf - Get link/speed status
+ *  @hw: pointer to hardware structure
+ *  @speed: pointer to link speed
+ *  @link_up: true is link is up, false otherwise
+ *  @autoneg_wait_to_complete: true when waiting for completion is needed
+ *
+ *  Reads the links register to determine if link is up and the current speed
+ **/
+s32 ixgbe_check_mac_link_vf(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+			    bool *link_up, bool autoneg_wait_to_complete)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+	struct ixgbe_mac_info *mac = &hw->mac;
+	s32 ret_val = IXGBE_SUCCESS;
+	u32 links_reg;
+	u32 in_msg = 0;
+	UNREFERENCED_1PARAMETER(autoneg_wait_to_complete);
+
+	/* If we were hit with a reset drop the link */
+	if (!mbx->ops.check_for_rst(hw, 0) || !mbx->timeout)
+		mac->get_link_status = true;
+
+	if (!mac->get_link_status)
+		goto out;
+
+	/* if link status is down no point in checking to see if pf is up */
+	links_reg = IXGBE_READ_REG(hw, IXGBE_VFLINKS);
+	if (!(links_reg & IXGBE_LINKS_UP))
+		goto out;
+
+	/* for SFP+ modules and DA cables on 82599 it can take up to 500usecs
+	 * before the link status is correct
+	 */
+	if (mac->type == ixgbe_mac_82599_vf) {
+		int i;
+
+		for (i = 0; i < 5; i++) {
+			usec_delay(100);
+			links_reg = IXGBE_READ_REG(hw, IXGBE_VFLINKS);
+
+			if (!(links_reg & IXGBE_LINKS_UP))
+				goto out;
+		}
+	}
+
+	switch (links_reg & IXGBE_LINKS_SPEED_82599) {
+	case IXGBE_LINKS_SPEED_10G_82599:
+		*speed = IXGBE_LINK_SPEED_10GB_FULL;
+		break;
+	case IXGBE_LINKS_SPEED_1G_82599:
+		*speed = IXGBE_LINK_SPEED_1GB_FULL;
+		break;
+	case IXGBE_LINKS_SPEED_100_82599:
+		*speed = IXGBE_LINK_SPEED_100_FULL;
+		break;
+	}
+
+	/* if the read failed it could just be a mailbox collision, best wait
+	 * until we are called again and don't report an error
+	 */
+	if (mbx->ops.read(hw, &in_msg, 1, 0))
+		goto out;
+
+	if (!(in_msg & IXGBE_VT_MSGTYPE_CTS)) {
+		/* msg is not CTS and is NACK we must have lost CTS status */
+		if (in_msg & IXGBE_VT_MSGTYPE_NACK)
+			ret_val = -1;
+		goto out;
+	}
+
+	/* the pf is talking, if we timed out in the past we reinit */
+	if (!mbx->timeout) {
+		ret_val = -1;
+		goto out;
+	}
+
+	/* if we passed all the tests above then the link is up and we no
+	 * longer need to check for link
+	 */
+	mac->get_link_status = false;
+
+out:
+	*link_up = !mac->get_link_status;
+	return ret_val;
+}
+
+/**
+ *  ixgbevf_rlpml_set_vf - Set the maximum receive packet length
+ *  @hw: pointer to the HW structure
+ *  @max_size: value to assign to max frame size
+ **/
+void ixgbevf_rlpml_set_vf(struct ixgbe_hw *hw, u16 max_size)
+{
+	u32 msgbuf[2];
+
+	msgbuf[0] = IXGBE_VF_SET_LPE;
+	msgbuf[1] = max_size;
+	ixgbevf_write_msg_read_ack(hw, msgbuf, 2);
+}
+
+/**
+ *  ixgbevf_negotiate_api_version - Negotiate supported API version
+ *  @hw: pointer to the HW structure
+ *  @api: integer containing requested API version
+ **/
+int ixgbevf_negotiate_api_version(struct ixgbe_hw *hw, int api)
+{
+	int err;
+	u32 msg[3];
+
+	/* Negotiate the mailbox API version */
+	msg[0] = IXGBE_VF_API_NEGOTIATE;
+	msg[1] = api;
+	msg[2] = 0;
+	err = hw->mbx.ops.write_posted(hw, msg, 3, 0);
+
+	if (!err)
+		err = hw->mbx.ops.read_posted(hw, msg, 3, 0);
+
+	if (!err) {
+		msg[0] &= ~IXGBE_VT_MSGTYPE_CTS;
+
+		/* Store value and return 0 on success */
+		if (msg[0] == (IXGBE_VF_API_NEGOTIATE | IXGBE_VT_MSGTYPE_ACK)) {
+			hw->api_version = api;
+			return 0;
+		}
+
+		err = IXGBE_ERR_INVALID_ARGUMENT;
+	}
+
+	return err;
+}
+
+int ixgbevf_get_queues(struct ixgbe_hw *hw, unsigned int *num_tcs,
+		       unsigned int *default_tc)
+{
+	int err;
+	u32 msg[5];
+
+	/* do nothing if API doesn't support ixgbevf_get_queues */
+	switch (hw->api_version) {
+	case ixgbe_mbox_api_11:
+	case ixgbe_mbox_api_12:
+		break;
+	default:
+		return 0;
+	}
+
+	/* Fetch queue configuration from the PF */
+	msg[0] = IXGBE_VF_GET_QUEUES;
+	msg[1] = msg[2] = msg[3] = msg[4] = 0;
+	err = hw->mbx.ops.write_posted(hw, msg, 5, 0);
+
+	if (!err)
+		err = hw->mbx.ops.read_posted(hw, msg, 5, 0);
+
+	if (!err) {
+		msg[0] &= ~IXGBE_VT_MSGTYPE_CTS;
+
+		/*
+		 * if we we didn't get an ACK there must have been
+		 * some sort of mailbox error so we should treat it
+		 * as such
+		 */
+		if (msg[0] != (IXGBE_VF_GET_QUEUES | IXGBE_VT_MSGTYPE_ACK))
+			return IXGBE_ERR_MBX;
+
+		/* record and validate values from message */
+		hw->mac.max_tx_queues = msg[IXGBE_VF_TX_QUEUES];
+		if (hw->mac.max_tx_queues == 0 ||
+		    hw->mac.max_tx_queues > IXGBE_VF_MAX_TX_QUEUES)
+			hw->mac.max_tx_queues = IXGBE_VF_MAX_TX_QUEUES;
+
+		hw->mac.max_rx_queues = msg[IXGBE_VF_RX_QUEUES];
+		if (hw->mac.max_rx_queues == 0 ||
+		    hw->mac.max_rx_queues > IXGBE_VF_MAX_RX_QUEUES)
+			hw->mac.max_rx_queues = IXGBE_VF_MAX_RX_QUEUES;
+
+		*num_tcs = msg[IXGBE_VF_TRANS_VLAN];
+		/* in case of unknown state assume we cannot tag frames */
+		if (*num_tcs > hw->mac.max_rx_queues)
+			*num_tcs = 1;
+
+		*default_tc = msg[IXGBE_VF_DEF_QUEUE];
+		/* default to queue 0 on out-of-bounds queue number */
+		if (*default_tc >= hw->mac.max_tx_queues)
+			*default_tc = 0;
+	}
+
+	return err;
+}
diff --git a/drivers/net/ixgbe/base/ixgbe_vf.h b/drivers/net/ixgbe/base/ixgbe_vf.h
new file mode 100644
index 00000000..411152a4
--- /dev/null
+++ b/drivers/net/ixgbe/base/ixgbe_vf.h
@@ -0,0 +1,140 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+    this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in the
+    documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+    contributors may be used to endorse or promote products derived from
+    this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#ifndef __IXGBE_VF_H__
+#define __IXGBE_VF_H__
+
+#define IXGBE_VF_IRQ_CLEAR_MASK	7
+#define IXGBE_VF_MAX_TX_QUEUES	8
+#define IXGBE_VF_MAX_RX_QUEUES	8
+
+/* DCB define */
+#define IXGBE_VF_MAX_TRAFFIC_CLASS	8
+
+#define IXGBE_VFCTRL		0x00000
+#define IXGBE_VFSTATUS		0x00008
+#define IXGBE_VFLINKS		0x00010
+#define IXGBE_VFFRTIMER		0x00048
+#define IXGBE_VFRXMEMWRAP	0x03190
+#define IXGBE_VTEICR		0x00100
+#define IXGBE_VTEICS		0x00104
+#define IXGBE_VTEIMS		0x00108
+#define IXGBE_VTEIMC		0x0010C
+#define IXGBE_VTEIAC		0x00110
+#define IXGBE_VTEIAM		0x00114
+#define IXGBE_VTEITR(x)		(0x00820 + (4 * (x)))
+#define IXGBE_VTIVAR(x)		(0x00120 + (4 * (x)))
+#define IXGBE_VTIVAR_MISC	0x00140
+#define IXGBE_VTRSCINT(x)	(0x00180 + (4 * (x)))
+/* define IXGBE_VFPBACL  still says TBD in EAS */
+#define IXGBE_VFRDBAL(x)	(0x01000 + (0x40 * (x)))
+#define IXGBE_VFRDBAH(x)	(0x01004 + (0x40 * (x)))
+#define IXGBE_VFRDLEN(x)	(0x01008 + (0x40 * (x)))
+#define IXGBE_VFRDH(x)		(0x01010 + (0x40 * (x)))
+#define IXGBE_VFRDT(x)		(0x01018 + (0x40 * (x)))
+#define IXGBE_VFRXDCTL(x)	(0x01028 + (0x40 * (x)))
+#define IXGBE_VFSRRCTL(x)	(0x01014 + (0x40 * (x)))
+#define IXGBE_VFRSCCTL(x)	(0x0102C + (0x40 * (x)))
+#define IXGBE_VFPSRTYPE		0x00300
+#define IXGBE_VFTDBAL(x)	(0x02000 + (0x40 * (x)))
+#define IXGBE_VFTDBAH(x)	(0x02004 + (0x40 * (x)))
+#define IXGBE_VFTDLEN(x)	(0x02008 + (0x40 * (x)))
+#define IXGBE_VFTDH(x)		(0x02010 + (0x40 * (x)))
+#define IXGBE_VFTDT(x)		(0x02018 + (0x40 * (x)))
+#define IXGBE_VFTXDCTL(x)	(0x02028 + (0x40 * (x)))
+#define IXGBE_VFTDWBAL(x)	(0x02038 + (0x40 * (x)))
+#define IXGBE_VFTDWBAH(x)	(0x0203C + (0x40 * (x)))
+#define IXGBE_VFDCA_RXCTRL(x)	(0x0100C + (0x40 * (x)))
+#define IXGBE_VFDCA_TXCTRL(x)	(0x0200c + (0x40 * (x)))
+#define IXGBE_VFGPRC		0x0101C
+#define IXGBE_VFGPTC		0x0201C
+#define IXGBE_VFGORC_LSB	0x01020
+#define IXGBE_VFGORC_MSB	0x01024
+#define IXGBE_VFGOTC_LSB	0x02020
+#define IXGBE_VFGOTC_MSB	0x02024
+#define IXGBE_VFMPRC		0x01034
+#define IXGBE_VFMRQC		0x3000
+#define IXGBE_VFRSSRK(x)	(0x3100 + ((x) * 4))
+#define IXGBE_VFRETA(x)	(0x3200 + ((x) * 4))
+
+
+struct ixgbevf_hw_stats {
+	u64 base_vfgprc;
+	u64 base_vfgptc;
+	u64 base_vfgorc;
+	u64 base_vfgotc;
+	u64 base_vfmprc;
+
+	u64 last_vfgprc;
+	u64 last_vfgptc;
+	u64 last_vfgorc;
+	u64 last_vfgotc;
+	u64 last_vfmprc;
+
+	u64 vfgprc;
+	u64 vfgptc;
+	u64 vfgorc;
+	u64 vfgotc;
+	u64 vfmprc;
+
+	u64 saved_reset_vfgprc;
+	u64 saved_reset_vfgptc;
+	u64 saved_reset_vfgorc;
+	u64 saved_reset_vfgotc;
+	u64 saved_reset_vfmprc;
+};
+
+s32 ixgbe_init_hw_vf(struct ixgbe_hw *hw);
+s32 ixgbe_start_hw_vf(struct ixgbe_hw *hw);
+s32 ixgbe_reset_hw_vf(struct ixgbe_hw *hw);
+s32 ixgbe_stop_adapter_vf(struct ixgbe_hw *hw);
+u32 ixgbe_get_num_of_tx_queues_vf(struct ixgbe_hw *hw);
+u32 ixgbe_get_num_of_rx_queues_vf(struct ixgbe_hw *hw);
+s32 ixgbe_get_mac_addr_vf(struct ixgbe_hw *hw, u8 *mac_addr);
+s32 ixgbe_setup_mac_link_vf(struct ixgbe_hw *hw, ixgbe_link_speed speed,
+			    bool autoneg_wait_to_complete);
+s32 ixgbe_check_mac_link_vf(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+			    bool *link_up, bool autoneg_wait_to_complete);
+s32 ixgbe_set_rar_vf(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
+		     u32 enable_addr);
+s32 ixgbevf_set_uc_addr_vf(struct ixgbe_hw *hw, u32 index, u8 *addr);
+s32 ixgbe_update_mc_addr_list_vf(struct ixgbe_hw *hw, u8 *mc_addr_list,
+				 u32 mc_addr_count, ixgbe_mc_addr_itr,
+				 bool clear);
+s32 ixgbe_set_vfta_vf(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on);
+void ixgbevf_rlpml_set_vf(struct ixgbe_hw *hw, u16 max_size);
+int ixgbevf_negotiate_api_version(struct ixgbe_hw *hw, int api);
+int ixgbevf_get_queues(struct ixgbe_hw *hw, unsigned int *num_tcs,
+		       unsigned int *default_tc);
+
+#endif /* __IXGBE_VF_H__ */
diff --git a/drivers/net/ixgbe/base/ixgbe_x540.c b/drivers/net/ixgbe/base/ixgbe_x540.c
new file mode 100644
index 00000000..9ade1b5e
--- /dev/null
+++ b/drivers/net/ixgbe/base/ixgbe_x540.c
@@ -0,0 +1,1012 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+    this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in the
+    documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+    contributors may be used to endorse or promote products derived from
+    this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#include "ixgbe_x540.h"
+#include "ixgbe_type.h"
+#include "ixgbe_api.h"
+#include "ixgbe_common.h"
+#include "ixgbe_phy.h"
+
+#define IXGBE_X540_MAX_TX_QUEUES	128
+#define IXGBE_X540_MAX_RX_QUEUES	128
+#define IXGBE_X540_RAR_ENTRIES		128
+#define IXGBE_X540_MC_TBL_SIZE		128
+#define IXGBE_X540_VFT_TBL_SIZE		128
+#define IXGBE_X540_RX_PB_SIZE		384
+
+STATIC s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw);
+STATIC s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw);
+STATIC void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw);
+
+/**
+ *  ixgbe_init_ops_X540 - Inits func ptrs and MAC type
+ *  @hw: pointer to hardware structure
+ *
+ *  Initialize the function pointers and assign the MAC type for X540.
+ *  Does not touch the hardware.
+ **/
+s32 ixgbe_init_ops_X540(struct ixgbe_hw *hw)
+{
+	struct ixgbe_mac_info *mac = &hw->mac;
+	struct ixgbe_phy_info *phy = &hw->phy;
+	struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+	s32 ret_val;
+
+	DEBUGFUNC("ixgbe_init_ops_X540");
+
+	ret_val = ixgbe_init_phy_ops_generic(hw);
+	ret_val = ixgbe_init_ops_generic(hw);
+
+
+	/* EEPROM */
+	eeprom->ops.init_params = ixgbe_init_eeprom_params_X540;
+	eeprom->ops.read = ixgbe_read_eerd_X540;
+	eeprom->ops.read_buffer = ixgbe_read_eerd_buffer_X540;
+	eeprom->ops.write = ixgbe_write_eewr_X540;
+	eeprom->ops.write_buffer = ixgbe_write_eewr_buffer_X540;
+	eeprom->ops.update_checksum = ixgbe_update_eeprom_checksum_X540;
+	eeprom->ops.validate_checksum = ixgbe_validate_eeprom_checksum_X540;
+	eeprom->ops.calc_checksum = ixgbe_calc_eeprom_checksum_X540;
+
+	/* PHY */
+	phy->ops.init = ixgbe_init_phy_ops_generic;
+	phy->ops.reset = NULL;
+	phy->ops.set_phy_power = ixgbe_set_copper_phy_power;
+
+	/* MAC */
+	mac->ops.reset_hw = ixgbe_reset_hw_X540;
+	mac->ops.enable_relaxed_ordering = ixgbe_enable_relaxed_ordering_gen2;
+	mac->ops.get_media_type = ixgbe_get_media_type_X540;
+	mac->ops.get_supported_physical_layer =
+				    ixgbe_get_supported_physical_layer_X540;
+	mac->ops.read_analog_reg8 = NULL;
+	mac->ops.write_analog_reg8 = NULL;
+	mac->ops.start_hw = ixgbe_start_hw_X540;
+	mac->ops.get_san_mac_addr = ixgbe_get_san_mac_addr_generic;
+	mac->ops.set_san_mac_addr = ixgbe_set_san_mac_addr_generic;
+	mac->ops.get_device_caps = ixgbe_get_device_caps_generic;
+	mac->ops.get_wwn_prefix = ixgbe_get_wwn_prefix_generic;
+	mac->ops.get_fcoe_boot_status = ixgbe_get_fcoe_boot_status_generic;
+	mac->ops.acquire_swfw_sync = ixgbe_acquire_swfw_sync_X540;
+	mac->ops.release_swfw_sync = ixgbe_release_swfw_sync_X540;
+	mac->ops.disable_sec_rx_path = ixgbe_disable_sec_rx_path_generic;
+	mac->ops.enable_sec_rx_path = ixgbe_enable_sec_rx_path_generic;
+
+	/* RAR, Multicast, VLAN */
+	mac->ops.set_vmdq = ixgbe_set_vmdq_generic;
+	mac->ops.set_vmdq_san_mac = ixgbe_set_vmdq_san_mac_generic;
+	mac->ops.clear_vmdq = ixgbe_clear_vmdq_generic;
+	mac->ops.insert_mac_addr = ixgbe_insert_mac_addr_generic;
+	mac->rar_highwater = 1;
+	mac->ops.set_vfta = ixgbe_set_vfta_generic;
+	mac->ops.set_vlvf = ixgbe_set_vlvf_generic;
+	mac->ops.clear_vfta = ixgbe_clear_vfta_generic;
+	mac->ops.init_uta_tables = ixgbe_init_uta_tables_generic;
+	mac->ops.set_mac_anti_spoofing = ixgbe_set_mac_anti_spoofing;
+	mac->ops.set_vlan_anti_spoofing = ixgbe_set_vlan_anti_spoofing;
+
+	/* Link */
+	mac->ops.get_link_capabilities =
+				ixgbe_get_copper_link_capabilities_generic;
+	mac->ops.setup_link = ixgbe_setup_mac_link_X540;
+	mac->ops.setup_rxpba = ixgbe_set_rxpba_generic;
+	mac->ops.check_link = ixgbe_check_mac_link_generic;
+
+
+	mac->mcft_size		= IXGBE_X540_MC_TBL_SIZE;
+	mac->vft_size		= IXGBE_X540_VFT_TBL_SIZE;
+	mac->num_rar_entries	= IXGBE_X540_RAR_ENTRIES;
+	mac->rx_pb_size		= IXGBE_X540_RX_PB_SIZE;
+	mac->max_rx_queues	= IXGBE_X540_MAX_RX_QUEUES;
+	mac->max_tx_queues	= IXGBE_X540_MAX_TX_QUEUES;
+	mac->max_msix_vectors	= ixgbe_get_pcie_msix_count_generic(hw);
+
+	/*
+	 * FWSM register
+	 * ARC supported; valid only if manageability features are
+	 * enabled.
+	 */
+	mac->arc_subsystem_valid = !!(IXGBE_READ_REG(hw, IXGBE_FWSM_BY_MAC(hw))
+				     & IXGBE_FWSM_MODE_MASK);
+
+	hw->mbx.ops.init_params = ixgbe_init_mbx_params_pf;
+
+	/* LEDs */
+	mac->ops.blink_led_start = ixgbe_blink_led_start_X540;
+	mac->ops.blink_led_stop = ixgbe_blink_led_stop_X540;
+
+	/* Manageability interface */
+	mac->ops.set_fw_drv_ver = ixgbe_set_fw_drv_ver_generic;
+
+	mac->ops.get_rtrup2tc = ixgbe_dcb_get_rtrup2tc_generic;
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_get_link_capabilities_X540 - Determines link capabilities
+ *  @hw: pointer to hardware structure
+ *  @speed: pointer to link speed
+ *  @autoneg: true when autoneg or autotry is enabled
+ *
+ *  Determines the link capabilities by reading the AUTOC register.
+ **/
+s32 ixgbe_get_link_capabilities_X540(struct ixgbe_hw *hw,
+				     ixgbe_link_speed *speed,
+				     bool *autoneg)
+{
+	ixgbe_get_copper_link_capabilities_generic(hw, speed, autoneg);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_get_media_type_X540 - Get media type
+ *  @hw: pointer to hardware structure
+ *
+ *  Returns the media type (fiber, copper, backplane)
+ **/
+enum ixgbe_media_type ixgbe_get_media_type_X540(struct ixgbe_hw *hw)
+{
+	UNREFERENCED_1PARAMETER(hw);
+	return ixgbe_media_type_copper;
+}
+
+/**
+ *  ixgbe_setup_mac_link_X540 - Sets the auto advertised capabilities
+ *  @hw: pointer to hardware structure
+ *  @speed: new link speed
+ *  @autoneg_wait_to_complete: true when waiting for completion is needed
+ **/
+s32 ixgbe_setup_mac_link_X540(struct ixgbe_hw *hw,
+			      ixgbe_link_speed speed,
+			      bool autoneg_wait_to_complete)
+{
+	DEBUGFUNC("ixgbe_setup_mac_link_X540");
+	return hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait_to_complete);
+}
+
+/**
+ *  ixgbe_reset_hw_X540 - Perform hardware reset
+ *  @hw: pointer to hardware structure
+ *
+ *  Resets the hardware by resetting the transmit and receive units, masks
+ *  and clears all interrupts, and perform a reset.
+ **/
+s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw)
+{
+	s32 status;
+	u32 ctrl, i;
+
+	DEBUGFUNC("ixgbe_reset_hw_X540");
+
+	/* Call adapter stop to disable tx/rx and clear interrupts */
+	status = hw->mac.ops.stop_adapter(hw);
+	if (status != IXGBE_SUCCESS)
+		goto reset_hw_out;
+
+	/* flush pending Tx transactions */
+	ixgbe_clear_tx_pending(hw);
+
+mac_reset_top:
+	ctrl = IXGBE_CTRL_RST;
+	ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL);
+	IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl);
+	IXGBE_WRITE_FLUSH(hw);
+
+	/* Poll for reset bit to self-clear indicating reset is complete */
+	for (i = 0; i < 10; i++) {
+		usec_delay(1);
+		ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
+		if (!(ctrl & IXGBE_CTRL_RST_MASK))
+			break;
+	}
+
+	if (ctrl & IXGBE_CTRL_RST_MASK) {
+		status = IXGBE_ERR_RESET_FAILED;
+		ERROR_REPORT1(IXGBE_ERROR_POLLING,
+			     "Reset polling failed to complete.\n");
+	}
+	msec_delay(100);
+
+	/*
+	 * Double resets are required for recovery from certain error
+	 * conditions.  Between resets, it is necessary to stall to allow time
+	 * for any pending HW events to complete.
+	 */
+	if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) {
+		hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
+		goto mac_reset_top;
+	}
+
+	/* Set the Rx packet buffer size. */
+	IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(0), 384 << IXGBE_RXPBSIZE_SHIFT);
+
+	/* Store the permanent mac address */
+	hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
+
+	/*
+	 * Store MAC address from RAR0, clear receive address registers, and
+	 * clear the multicast table.  Also reset num_rar_entries to 128,
+	 * since we modify this value when programming the SAN MAC address.
+	 */
+	hw->mac.num_rar_entries = 128;
+	hw->mac.ops.init_rx_addrs(hw);
+
+	/* Store the permanent SAN mac address */
+	hw->mac.ops.get_san_mac_addr(hw, hw->mac.san_addr);
+
+	/* Add the SAN MAC address to the RAR only if it's a valid address */
+	if (ixgbe_validate_mac_addr(hw->mac.san_addr) == 0) {
+		hw->mac.ops.set_rar(hw, hw->mac.num_rar_entries - 1,
+				    hw->mac.san_addr, 0, IXGBE_RAH_AV);
+
+		/* Save the SAN MAC RAR index */
+		hw->mac.san_mac_rar_index = hw->mac.num_rar_entries - 1;
+
+		/* Reserve the last RAR for the SAN MAC address */
+		hw->mac.num_rar_entries--;
+	}
+
+	/* Store the alternative WWNN/WWPN prefix */
+	hw->mac.ops.get_wwn_prefix(hw, &hw->mac.wwnn_prefix,
+				   &hw->mac.wwpn_prefix);
+
+reset_hw_out:
+	return status;
+}
+
+/**
+ *  ixgbe_start_hw_X540 - Prepare hardware for Tx/Rx
+ *  @hw: pointer to hardware structure
+ *
+ *  Starts the hardware using the generic start_hw function
+ *  and the generation start_hw function.
+ *  Then performs revision-specific operations, if any.
+ **/
+s32 ixgbe_start_hw_X540(struct ixgbe_hw *hw)
+{
+	s32 ret_val = IXGBE_SUCCESS;
+
+	DEBUGFUNC("ixgbe_start_hw_X540");
+
+	ret_val = ixgbe_start_hw_generic(hw);
+	if (ret_val != IXGBE_SUCCESS)
+		goto out;
+
+	ret_val = ixgbe_start_hw_gen2(hw);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  ixgbe_get_supported_physical_layer_X540 - Returns physical layer type
+ *  @hw: pointer to hardware structure
+ *
+ *  Determines physical layer capabilities of the current configuration.
+ **/
+u32 ixgbe_get_supported_physical_layer_X540(struct ixgbe_hw *hw)
+{
+	u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+	u16 ext_ability = 0;
+
+	DEBUGFUNC("ixgbe_get_supported_physical_layer_X540");
+
+	hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_EXT_ABILITY,
+	IXGBE_MDIO_PMA_PMD_DEV_TYPE, &ext_ability);
+	if (ext_ability & IXGBE_MDIO_PHY_10GBASET_ABILITY)
+		physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T;
+	if (ext_ability & IXGBE_MDIO_PHY_1000BASET_ABILITY)
+		physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T;
+	if (ext_ability & IXGBE_MDIO_PHY_100BASETX_ABILITY)
+		physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX;
+
+	return physical_layer;
+}
+
+/**
+ *  ixgbe_init_eeprom_params_X540 - Initialize EEPROM params
+ *  @hw: pointer to hardware structure
+ *
+ *  Initializes the EEPROM parameters ixgbe_eeprom_info within the
+ *  ixgbe_hw struct in order to set up EEPROM access.
+ **/
+s32 ixgbe_init_eeprom_params_X540(struct ixgbe_hw *hw)
+{
+	struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+	u32 eec;
+	u16 eeprom_size;
+
+	DEBUGFUNC("ixgbe_init_eeprom_params_X540");
+
+	if (eeprom->type == ixgbe_eeprom_uninitialized) {
+		eeprom->semaphore_delay = 10;
+		eeprom->type = ixgbe_flash;
+
+		eec = IXGBE_READ_REG(hw, IXGBE_EEC_BY_MAC(hw));
+		eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >>
+				    IXGBE_EEC_SIZE_SHIFT);
+		eeprom->word_size = 1 << (eeprom_size +
+					  IXGBE_EEPROM_WORD_SIZE_SHIFT);
+
+		DEBUGOUT2("Eeprom params: type = %d, size = %d\n",
+			  eeprom->type, eeprom->word_size);
+	}
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_read_eerd_X540- Read EEPROM word using EERD
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to read
+ *  @data: word read from the EEPROM
+ *
+ *  Reads a 16 bit word from the EEPROM using the EERD register.
+ **/
+s32 ixgbe_read_eerd_X540(struct ixgbe_hw *hw, u16 offset, u16 *data)
+{
+	s32 status = IXGBE_SUCCESS;
+
+	DEBUGFUNC("ixgbe_read_eerd_X540");
+	if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) ==
+	    IXGBE_SUCCESS) {
+		status = ixgbe_read_eerd_generic(hw, offset, data);
+		hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+	} else {
+		status = IXGBE_ERR_SWFW_SYNC;
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_read_eerd_buffer_X540- Read EEPROM word(s) using EERD
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to read
+ *  @words: number of words
+ *  @data: word(s) read from the EEPROM
+ *
+ *  Reads a 16 bit word(s) from the EEPROM using the EERD register.
+ **/
+s32 ixgbe_read_eerd_buffer_X540(struct ixgbe_hw *hw,
+				u16 offset, u16 words, u16 *data)
+{
+	s32 status = IXGBE_SUCCESS;
+
+	DEBUGFUNC("ixgbe_read_eerd_buffer_X540");
+	if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) ==
+	    IXGBE_SUCCESS) {
+		status = ixgbe_read_eerd_buffer_generic(hw, offset,
+							words, data);
+		hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+	} else {
+		status = IXGBE_ERR_SWFW_SYNC;
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_write_eewr_X540 - Write EEPROM word using EEWR
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to write
+ *  @data: word write to the EEPROM
+ *
+ *  Write a 16 bit word to the EEPROM using the EEWR register.
+ **/
+s32 ixgbe_write_eewr_X540(struct ixgbe_hw *hw, u16 offset, u16 data)
+{
+	s32 status = IXGBE_SUCCESS;
+
+	DEBUGFUNC("ixgbe_write_eewr_X540");
+	if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) ==
+	    IXGBE_SUCCESS) {
+		status = ixgbe_write_eewr_generic(hw, offset, data);
+		hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+	} else {
+		status = IXGBE_ERR_SWFW_SYNC;
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_write_eewr_buffer_X540 - Write EEPROM word(s) using EEWR
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to write
+ *  @words: number of words
+ *  @data: word(s) write to the EEPROM
+ *
+ *  Write a 16 bit word(s) to the EEPROM using the EEWR register.
+ **/
+s32 ixgbe_write_eewr_buffer_X540(struct ixgbe_hw *hw,
+				 u16 offset, u16 words, u16 *data)
+{
+	s32 status = IXGBE_SUCCESS;
+
+	DEBUGFUNC("ixgbe_write_eewr_buffer_X540");
+	if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) ==
+	    IXGBE_SUCCESS) {
+		status = ixgbe_write_eewr_buffer_generic(hw, offset,
+							 words, data);
+		hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+	} else {
+		status = IXGBE_ERR_SWFW_SYNC;
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_calc_eeprom_checksum_X540 - Calculates and returns the checksum
+ *
+ *  This function does not use synchronization for EERD and EEWR. It can
+ *  be used internally by function which utilize ixgbe_acquire_swfw_sync_X540.
+ *
+ *  @hw: pointer to hardware structure
+ *
+ *  Returns a negative error code on error, or the 16-bit checksum
+ **/
+s32 ixgbe_calc_eeprom_checksum_X540(struct ixgbe_hw *hw)
+{
+	u16 i, j;
+	u16 checksum = 0;
+	u16 length = 0;
+	u16 pointer = 0;
+	u16 word = 0;
+	u16 checksum_last_word = IXGBE_EEPROM_CHECKSUM;
+	u16 ptr_start = IXGBE_PCIE_ANALOG_PTR;
+
+	/* Do not use hw->eeprom.ops.read because we do not want to take
+	 * the synchronization semaphores here. Instead use
+	 * ixgbe_read_eerd_generic
+	 */
+
+	DEBUGFUNC("ixgbe_calc_eeprom_checksum_X540");
+
+	/* Include 0x0-0x3F in the checksum */
+	for (i = 0; i <= checksum_last_word; i++) {
+		if (ixgbe_read_eerd_generic(hw, i, &word)) {
+			DEBUGOUT("EEPROM read failed\n");
+			return IXGBE_ERR_EEPROM;
+		}
+		if (i != IXGBE_EEPROM_CHECKSUM)
+			checksum += word;
+	}
+
+	/* Include all data from pointers 0x3, 0x6-0xE.  This excludes the
+	 * FW, PHY module, and PCIe Expansion/Option ROM pointers.
+	 */
+	for (i = ptr_start; i < IXGBE_FW_PTR; i++) {
+		if (i == IXGBE_PHY_PTR || i == IXGBE_OPTION_ROM_PTR)
+			continue;
+
+		if (ixgbe_read_eerd_generic(hw, i, &pointer)) {
+			DEBUGOUT("EEPROM read failed\n");
+			return IXGBE_ERR_EEPROM;
+		}
+
+		/* Skip pointer section if the pointer is invalid. */
+		if (pointer == 0xFFFF || pointer == 0 ||
+		    pointer >= hw->eeprom.word_size)
+			continue;
+
+		if (ixgbe_read_eerd_generic(hw, pointer, &length)) {
+			DEBUGOUT("EEPROM read failed\n");
+			return IXGBE_ERR_EEPROM;
+		}
+
+		/* Skip pointer section if length is invalid. */
+		if (length == 0xFFFF || length == 0 ||
+		    (pointer + length) >= hw->eeprom.word_size)
+			continue;
+
+		for (j = pointer + 1; j <= pointer + length; j++) {
+			if (ixgbe_read_eerd_generic(hw, j, &word)) {
+				DEBUGOUT("EEPROM read failed\n");
+				return IXGBE_ERR_EEPROM;
+			}
+			checksum += word;
+		}
+	}
+
+	checksum = (u16)IXGBE_EEPROM_SUM - checksum;
+
+	return (s32)checksum;
+}
+
+/**
+ *  ixgbe_validate_eeprom_checksum_X540 - Validate EEPROM checksum
+ *  @hw: pointer to hardware structure
+ *  @checksum_val: calculated checksum
+ *
+ *  Performs checksum calculation and validates the EEPROM checksum.  If the
+ *  caller does not need checksum_val, the value can be NULL.
+ **/
+s32 ixgbe_validate_eeprom_checksum_X540(struct ixgbe_hw *hw,
+					u16 *checksum_val)
+{
+	s32 status;
+	u16 checksum;
+	u16 read_checksum = 0;
+
+	DEBUGFUNC("ixgbe_validate_eeprom_checksum_X540");
+
+	/* Read the first word from the EEPROM. If this times out or fails, do
+	 * not continue or we could be in for a very long wait while every
+	 * EEPROM read fails
+	 */
+	status = hw->eeprom.ops.read(hw, 0, &checksum);
+	if (status) {
+		DEBUGOUT("EEPROM read failed\n");
+		return status;
+	}
+
+	if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM))
+		return IXGBE_ERR_SWFW_SYNC;
+
+	status = hw->eeprom.ops.calc_checksum(hw);
+	if (status < 0)
+		goto out;
+
+	checksum = (u16)(status & 0xffff);
+
+	/* Do not use hw->eeprom.ops.read because we do not want to take
+	 * the synchronization semaphores twice here.
+	 */
+	status = ixgbe_read_eerd_generic(hw, IXGBE_EEPROM_CHECKSUM,
+					 &read_checksum);
+	if (status)
+		goto out;
+
+	/* Verify read checksum from EEPROM is the same as
+	 * calculated checksum
+	 */
+	if (read_checksum != checksum) {
+		ERROR_REPORT1(IXGBE_ERROR_INVALID_STATE,
+			     "Invalid EEPROM checksum");
+		status = IXGBE_ERR_EEPROM_CHECKSUM;
+	}
+
+	/* If the user cares, return the calculated checksum */
+	if (checksum_val)
+		*checksum_val = checksum;
+
+out:
+	hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+
+	return status;
+}
+
+/**
+ * ixgbe_update_eeprom_checksum_X540 - Updates the EEPROM checksum and flash
+ * @hw: pointer to hardware structure
+ *
+ * After writing EEPROM to shadow RAM using EEWR register, software calculates
+ * checksum and updates the EEPROM and instructs the hardware to update
+ * the flash.
+ **/
+s32 ixgbe_update_eeprom_checksum_X540(struct ixgbe_hw *hw)
+{
+	s32 status;
+	u16 checksum;
+
+	DEBUGFUNC("ixgbe_update_eeprom_checksum_X540");
+
+	/* Read the first word from the EEPROM. If this times out or fails, do
+	 * not continue or we could be in for a very long wait while every
+	 * EEPROM read fails
+	 */
+	status = hw->eeprom.ops.read(hw, 0, &checksum);
+	if (status) {
+		DEBUGOUT("EEPROM read failed\n");
+		return status;
+	}
+
+	if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM))
+		return IXGBE_ERR_SWFW_SYNC;
+
+	status = hw->eeprom.ops.calc_checksum(hw);
+	if (status < 0)
+		goto out;
+
+	checksum = (u16)(status & 0xffff);
+
+	/* Do not use hw->eeprom.ops.write because we do not want to
+	 * take the synchronization semaphores twice here.
+	 */
+	status = ixgbe_write_eewr_generic(hw, IXGBE_EEPROM_CHECKSUM, checksum);
+	if (status)
+		goto out;
+
+	status = ixgbe_update_flash_X540(hw);
+
+out:
+	hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+
+	return status;
+}
+
+/**
+ *  ixgbe_update_flash_X540 - Instruct HW to copy EEPROM to Flash device
+ *  @hw: pointer to hardware structure
+ *
+ *  Set FLUP (bit 23) of the EEC register to instruct Hardware to copy
+ *  EEPROM from shadow RAM to the flash device.
+ **/
+s32 ixgbe_update_flash_X540(struct ixgbe_hw *hw)
+{
+	u32 flup;
+	s32 status;
+
+	DEBUGFUNC("ixgbe_update_flash_X540");
+
+	status = ixgbe_poll_flash_update_done_X540(hw);
+	if (status == IXGBE_ERR_EEPROM) {
+		DEBUGOUT("Flash update time out\n");
+		goto out;
+	}
+
+	flup = IXGBE_READ_REG(hw, IXGBE_EEC_BY_MAC(hw)) | IXGBE_EEC_FLUP;
+	IXGBE_WRITE_REG(hw, IXGBE_EEC_BY_MAC(hw), flup);
+
+	status = ixgbe_poll_flash_update_done_X540(hw);
+	if (status == IXGBE_SUCCESS)
+		DEBUGOUT("Flash update complete\n");
+	else
+		DEBUGOUT("Flash update time out\n");
+
+	if (hw->mac.type == ixgbe_mac_X540 && hw->revision_id == 0) {
+		flup = IXGBE_READ_REG(hw, IXGBE_EEC_BY_MAC(hw));
+
+		if (flup & IXGBE_EEC_SEC1VAL) {
+			flup |= IXGBE_EEC_FLUP;
+			IXGBE_WRITE_REG(hw, IXGBE_EEC_BY_MAC(hw), flup);
+		}
+
+		status = ixgbe_poll_flash_update_done_X540(hw);
+		if (status == IXGBE_SUCCESS)
+			DEBUGOUT("Flash update complete\n");
+		else
+			DEBUGOUT("Flash update time out\n");
+	}
+out:
+	return status;
+}
+
+/**
+ *  ixgbe_poll_flash_update_done_X540 - Poll flash update status
+ *  @hw: pointer to hardware structure
+ *
+ *  Polls the FLUDONE (bit 26) of the EEC Register to determine when the
+ *  flash update is done.
+ **/
+STATIC s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw)
+{
+	u32 i;
+	u32 reg;
+	s32 status = IXGBE_ERR_EEPROM;
+
+	DEBUGFUNC("ixgbe_poll_flash_update_done_X540");
+
+	for (i = 0; i < IXGBE_FLUDONE_ATTEMPTS; i++) {
+		reg = IXGBE_READ_REG(hw, IXGBE_EEC_BY_MAC(hw));
+		if (reg & IXGBE_EEC_FLUDONE) {
+			status = IXGBE_SUCCESS;
+			break;
+		}
+		msec_delay(5);
+	}
+
+	if (i == IXGBE_FLUDONE_ATTEMPTS)
+		ERROR_REPORT1(IXGBE_ERROR_POLLING,
+			     "Flash update status polling timed out");
+
+	return status;
+}
+
+/**
+ *  ixgbe_acquire_swfw_sync_X540 - Acquire SWFW semaphore
+ *  @hw: pointer to hardware structure
+ *  @mask: Mask to specify which semaphore to acquire
+ *
+ *  Acquires the SWFW semaphore thought the SW_FW_SYNC register for
+ *  the specified function (CSR, PHY0, PHY1, NVM, Flash)
+ **/
+s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask)
+{
+	u32 swmask = mask & IXGBE_GSSR_NVM_PHY_MASK;
+	u32 fwmask = swmask << 5;
+	u32 swi2c_mask = mask & IXGBE_GSSR_I2C_MASK;
+	u32 timeout = 200;
+	u32 hwmask = 0;
+	u32 swfw_sync;
+	u32 i;
+
+	DEBUGFUNC("ixgbe_acquire_swfw_sync_X540");
+
+	if (swmask & IXGBE_GSSR_EEP_SM)
+		hwmask |= IXGBE_GSSR_FLASH_SM;
+
+	/* SW only mask doesn't have FW bit pair */
+	if (mask & IXGBE_GSSR_SW_MNG_SM)
+		swmask |= IXGBE_GSSR_SW_MNG_SM;
+
+	swmask |= swi2c_mask;
+	fwmask |= swi2c_mask << 2;
+	for (i = 0; i < timeout; i++) {
+		/* SW NVM semaphore bit is used for access to all
+		 * SW_FW_SYNC bits (not just NVM)
+		 */
+		if (ixgbe_get_swfw_sync_semaphore(hw))
+			return IXGBE_ERR_SWFW_SYNC;
+
+		swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC_BY_MAC(hw));
+		if (!(swfw_sync & (fwmask | swmask | hwmask))) {
+			swfw_sync |= swmask;
+			IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC_BY_MAC(hw),
+					swfw_sync);
+			ixgbe_release_swfw_sync_semaphore(hw);
+			msec_delay(5);
+			return IXGBE_SUCCESS;
+		}
+		/* Firmware currently using resource (fwmask), hardware
+		 * currently using resource (hwmask), or other software
+		 * thread currently using resource (swmask)
+		 */
+		ixgbe_release_swfw_sync_semaphore(hw);
+		msec_delay(5);
+	}
+
+	/* Failed to get SW only semaphore */
+	if (swmask == IXGBE_GSSR_SW_MNG_SM) {
+		ERROR_REPORT1(IXGBE_ERROR_POLLING,
+			     "Failed to get SW only semaphore");
+		return IXGBE_ERR_SWFW_SYNC;
+	}
+
+	/* If the resource is not released by the FW/HW the SW can assume that
+	 * the FW/HW malfunctions. In that case the SW should set the SW bit(s)
+	 * of the requested resource(s) while ignoring the corresponding FW/HW
+	 * bits in the SW_FW_SYNC register.
+	 */
+	if (ixgbe_get_swfw_sync_semaphore(hw))
+		return IXGBE_ERR_SWFW_SYNC;
+	swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC_BY_MAC(hw));
+	if (swfw_sync & (fwmask | hwmask)) {
+		swfw_sync |= swmask;
+		IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC_BY_MAC(hw), swfw_sync);
+		ixgbe_release_swfw_sync_semaphore(hw);
+		msec_delay(5);
+		return IXGBE_SUCCESS;
+	}
+	/* If the resource is not released by other SW the SW can assume that
+	 * the other SW malfunctions. In that case the SW should clear all SW
+	 * flags that it does not own and then repeat the whole process once
+	 * again.
+	 */
+	if (swfw_sync & swmask) {
+		u32 rmask = IXGBE_GSSR_EEP_SM | IXGBE_GSSR_PHY0_SM |
+			    IXGBE_GSSR_PHY1_SM | IXGBE_GSSR_MAC_CSR_SM;
+
+		if (swi2c_mask)
+			rmask |= IXGBE_GSSR_I2C_MASK;
+		ixgbe_release_swfw_sync_X540(hw, rmask);
+		ixgbe_release_swfw_sync_semaphore(hw);
+		return IXGBE_ERR_SWFW_SYNC;
+	}
+	ixgbe_release_swfw_sync_semaphore(hw);
+
+	return IXGBE_ERR_SWFW_SYNC;
+}
+
+/**
+ *  ixgbe_release_swfw_sync_X540 - Release SWFW semaphore
+ *  @hw: pointer to hardware structure
+ *  @mask: Mask to specify which semaphore to release
+ *
+ *  Releases the SWFW semaphore through the SW_FW_SYNC register
+ *  for the specified function (CSR, PHY0, PHY1, EVM, Flash)
+ **/
+void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask)
+{
+	u32 swmask = mask & (IXGBE_GSSR_NVM_PHY_MASK | IXGBE_GSSR_SW_MNG_SM);
+	u32 swfw_sync;
+
+	DEBUGFUNC("ixgbe_release_swfw_sync_X540");
+
+	if (mask & IXGBE_GSSR_I2C_MASK)
+		swmask |= mask & IXGBE_GSSR_I2C_MASK;
+	ixgbe_get_swfw_sync_semaphore(hw);
+
+	swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC_BY_MAC(hw));
+	swfw_sync &= ~swmask;
+	IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC_BY_MAC(hw), swfw_sync);
+
+	ixgbe_release_swfw_sync_semaphore(hw);
+	msec_delay(5);
+}
+
+/**
+ *  ixgbe_get_swfw_sync_semaphore - Get hardware semaphore
+ *  @hw: pointer to hardware structure
+ *
+ *  Sets the hardware semaphores so SW/FW can gain control of shared resources
+ **/
+STATIC s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw)
+{
+	s32 status = IXGBE_ERR_EEPROM;
+	u32 timeout = 2000;
+	u32 i;
+	u32 swsm;
+
+	DEBUGFUNC("ixgbe_get_swfw_sync_semaphore");
+
+	/* Get SMBI software semaphore between device drivers first */
+	for (i = 0; i < timeout; i++) {
+		/*
+		 * If the SMBI bit is 0 when we read it, then the bit will be
+		 * set and we have the semaphore
+		 */
+		swsm = IXGBE_READ_REG(hw, IXGBE_SWSM_BY_MAC(hw));
+		if (!(swsm & IXGBE_SWSM_SMBI)) {
+			status = IXGBE_SUCCESS;
+			break;
+		}
+		usec_delay(50);
+	}
+
+	/* Now get the semaphore between SW/FW through the REGSMP bit */
+	if (status == IXGBE_SUCCESS) {
+		for (i = 0; i < timeout; i++) {
+			swsm = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC_BY_MAC(hw));
+			if (!(swsm & IXGBE_SWFW_REGSMP))
+				break;
+
+			usec_delay(50);
+		}
+
+		/*
+		 * Release semaphores and return error if SW NVM semaphore
+		 * was not granted because we don't have access to the EEPROM
+		 */
+		if (i >= timeout) {
+			ERROR_REPORT1(IXGBE_ERROR_POLLING,
+				"REGSMP Software NVM semaphore not granted.\n");
+			ixgbe_release_swfw_sync_semaphore(hw);
+			status = IXGBE_ERR_EEPROM;
+		}
+	} else {
+		ERROR_REPORT1(IXGBE_ERROR_POLLING,
+			     "Software semaphore SMBI between device drivers "
+			     "not granted.\n");
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_release_swfw_sync_semaphore - Release hardware semaphore
+ *  @hw: pointer to hardware structure
+ *
+ *  This function clears hardware semaphore bits.
+ **/
+STATIC void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw)
+{
+	u32 swsm;
+
+	DEBUGFUNC("ixgbe_release_swfw_sync_semaphore");
+
+	/* Release both semaphores by writing 0 to the bits REGSMP and SMBI */
+
+	swsm = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC_BY_MAC(hw));
+	swsm &= ~IXGBE_SWFW_REGSMP;
+	IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC_BY_MAC(hw), swsm);
+
+	swsm = IXGBE_READ_REG(hw, IXGBE_SWSM_BY_MAC(hw));
+	swsm &= ~IXGBE_SWSM_SMBI;
+	IXGBE_WRITE_REG(hw, IXGBE_SWSM_BY_MAC(hw), swsm);
+
+	IXGBE_WRITE_FLUSH(hw);
+}
+
+/**
+ * ixgbe_blink_led_start_X540 - Blink LED based on index.
+ * @hw: pointer to hardware structure
+ * @index: led number to blink
+ *
+ * Devices that implement the version 2 interface:
+ *   X540
+ **/
+s32 ixgbe_blink_led_start_X540(struct ixgbe_hw *hw, u32 index)
+{
+	u32 macc_reg;
+	u32 ledctl_reg;
+	ixgbe_link_speed speed;
+	bool link_up;
+
+	DEBUGFUNC("ixgbe_blink_led_start_X540");
+
+	/*
+	 * Link should be up in order for the blink bit in the LED control
+	 * register to work. Force link and speed in the MAC if link is down.
+	 * This will be reversed when we stop the blinking.
+	 */
+	hw->mac.ops.check_link(hw, &speed, &link_up, false);
+	if (link_up == false) {
+		macc_reg = IXGBE_READ_REG(hw, IXGBE_MACC);
+		macc_reg |= IXGBE_MACC_FLU | IXGBE_MACC_FSV_10G | IXGBE_MACC_FS;
+		IXGBE_WRITE_REG(hw, IXGBE_MACC, macc_reg);
+	}
+	/* Set the LED to LINK_UP + BLINK. */
+	ledctl_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+	ledctl_reg &= ~IXGBE_LED_MODE_MASK(index);
+	ledctl_reg |= IXGBE_LED_BLINK(index);
+	IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, ledctl_reg);
+	IXGBE_WRITE_FLUSH(hw);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_blink_led_stop_X540 - Stop blinking LED based on index.
+ * @hw: pointer to hardware structure
+ * @index: led number to stop blinking
+ *
+ * Devices that implement the version 2 interface:
+ *   X540
+ **/
+s32 ixgbe_blink_led_stop_X540(struct ixgbe_hw *hw, u32 index)
+{
+	u32 macc_reg;
+	u32 ledctl_reg;
+
+	DEBUGFUNC("ixgbe_blink_led_stop_X540");
+
+	/* Restore the LED to its default value. */
+	ledctl_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+	ledctl_reg &= ~IXGBE_LED_MODE_MASK(index);
+	ledctl_reg |= IXGBE_LED_LINK_ACTIVE << IXGBE_LED_MODE_SHIFT(index);
+	ledctl_reg &= ~IXGBE_LED_BLINK(index);
+	IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, ledctl_reg);
+
+	/* Unforce link and speed in the MAC. */
+	macc_reg = IXGBE_READ_REG(hw, IXGBE_MACC);
+	macc_reg &= ~(IXGBE_MACC_FLU | IXGBE_MACC_FSV_10G | IXGBE_MACC_FS);
+	IXGBE_WRITE_REG(hw, IXGBE_MACC, macc_reg);
+	IXGBE_WRITE_FLUSH(hw);
+
+	return IXGBE_SUCCESS;
+}
diff --git a/drivers/net/ixgbe/base/ixgbe_x540.h b/drivers/net/ixgbe/base/ixgbe_x540.h
new file mode 100644
index 00000000..42c08a82
--- /dev/null
+++ b/drivers/net/ixgbe/base/ixgbe_x540.h
@@ -0,0 +1,66 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+    this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in the
+    documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+    contributors may be used to endorse or promote products derived from
+    this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#ifndef _IXGBE_X540_H_
+#define _IXGBE_X540_H_
+
+#include "ixgbe_type.h"
+
+s32 ixgbe_get_link_capabilities_X540(struct ixgbe_hw *hw,
+				     ixgbe_link_speed *speed, bool *autoneg);
+enum ixgbe_media_type ixgbe_get_media_type_X540(struct ixgbe_hw *hw);
+s32 ixgbe_setup_mac_link_X540(struct ixgbe_hw *hw, ixgbe_link_speed speed,
+			      bool link_up_wait_to_complete);
+s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw);
+s32 ixgbe_start_hw_X540(struct ixgbe_hw *hw);
+u32 ixgbe_get_supported_physical_layer_X540(struct ixgbe_hw *hw);
+
+s32 ixgbe_init_eeprom_params_X540(struct ixgbe_hw *hw);
+s32 ixgbe_read_eerd_X540(struct ixgbe_hw *hw, u16 offset, u16 *data);
+s32 ixgbe_read_eerd_buffer_X540(struct ixgbe_hw *hw, u16 offset, u16 words,
+				u16 *data);
+s32 ixgbe_write_eewr_X540(struct ixgbe_hw *hw, u16 offset, u16 data);
+s32 ixgbe_write_eewr_buffer_X540(struct ixgbe_hw *hw, u16 offset, u16 words,
+				 u16 *data);
+s32 ixgbe_update_eeprom_checksum_X540(struct ixgbe_hw *hw);
+s32 ixgbe_validate_eeprom_checksum_X540(struct ixgbe_hw *hw, u16 *checksum_val);
+s32 ixgbe_calc_eeprom_checksum_X540(struct ixgbe_hw *hw);
+s32 ixgbe_update_flash_X540(struct ixgbe_hw *hw);
+
+s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask);
+void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask);
+
+s32 ixgbe_blink_led_start_X540(struct ixgbe_hw *hw, u32 index);
+s32 ixgbe_blink_led_stop_X540(struct ixgbe_hw *hw, u32 index);
+#endif /* _IXGBE_X540_H_ */
+
diff --git a/drivers/net/ixgbe/base/ixgbe_x550.c b/drivers/net/ixgbe/base/ixgbe_x550.c
new file mode 100644
index 00000000..0bbaa55b
--- /dev/null
+++ b/drivers/net/ixgbe/base/ixgbe_x550.c
@@ -0,0 +1,3466 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+    this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in the
+    documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+    contributors may be used to endorse or promote products derived from
+    this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#include "ixgbe_x550.h"
+#include "ixgbe_x540.h"
+#include "ixgbe_type.h"
+#include "ixgbe_api.h"
+#include "ixgbe_common.h"
+#include "ixgbe_phy.h"
+
+STATIC s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed);
+static s32 ixgbe_acquire_swfw_sync_X550a(struct ixgbe_hw *, u32 mask);
+static void ixgbe_release_swfw_sync_X550a(struct ixgbe_hw *, u32 mask);
+
+/**
+ *  ixgbe_init_ops_X550 - Inits func ptrs and MAC type
+ *  @hw: pointer to hardware structure
+ *
+ *  Initialize the function pointers and assign the MAC type for X550.
+ *  Does not touch the hardware.
+ **/
+s32 ixgbe_init_ops_X550(struct ixgbe_hw *hw)
+{
+	struct ixgbe_mac_info *mac = &hw->mac;
+	struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+	s32 ret_val;
+
+	DEBUGFUNC("ixgbe_init_ops_X550");
+
+	ret_val = ixgbe_init_ops_X540(hw);
+	mac->ops.dmac_config = ixgbe_dmac_config_X550;
+	mac->ops.dmac_config_tcs = ixgbe_dmac_config_tcs_X550;
+	mac->ops.dmac_update_tcs = ixgbe_dmac_update_tcs_X550;
+	mac->ops.setup_eee = ixgbe_setup_eee_X550;
+	mac->ops.set_source_address_pruning =
+			ixgbe_set_source_address_pruning_X550;
+	mac->ops.set_ethertype_anti_spoofing =
+			ixgbe_set_ethertype_anti_spoofing_X550;
+
+	mac->ops.get_rtrup2tc = ixgbe_dcb_get_rtrup2tc_generic;
+	eeprom->ops.init_params = ixgbe_init_eeprom_params_X550;
+	eeprom->ops.calc_checksum = ixgbe_calc_eeprom_checksum_X550;
+	eeprom->ops.read = ixgbe_read_ee_hostif_X550;
+	eeprom->ops.read_buffer = ixgbe_read_ee_hostif_buffer_X550;
+	eeprom->ops.write = ixgbe_write_ee_hostif_X550;
+	eeprom->ops.write_buffer = ixgbe_write_ee_hostif_buffer_X550;
+	eeprom->ops.update_checksum = ixgbe_update_eeprom_checksum_X550;
+	eeprom->ops.validate_checksum = ixgbe_validate_eeprom_checksum_X550;
+
+	mac->ops.disable_mdd = ixgbe_disable_mdd_X550;
+	mac->ops.enable_mdd = ixgbe_enable_mdd_X550;
+	mac->ops.mdd_event = ixgbe_mdd_event_X550;
+	mac->ops.restore_mdd_vf = ixgbe_restore_mdd_vf_X550;
+	mac->ops.disable_rx = ixgbe_disable_rx_x550;
+	switch (hw->device_id) {
+	case IXGBE_DEV_ID_X550EM_X_10G_T:
+	case IXGBE_DEV_ID_X550EM_A_10G_T:
+		hw->mac.ops.led_on = ixgbe_led_on_t_X550em;
+		hw->mac.ops.led_off = ixgbe_led_off_t_X550em;
+		break;
+	default:
+		break;
+	}
+	return ret_val;
+}
+
+/**
+ * ixgbe_read_cs4227 - Read CS4227 register
+ * @hw: pointer to hardware structure
+ * @reg: register number to write
+ * @value: pointer to receive value read
+ *
+ * Returns status code
+ **/
+STATIC s32 ixgbe_read_cs4227(struct ixgbe_hw *hw, u16 reg, u16 *value)
+{
+	return hw->link.ops.read_link_unlocked(hw, hw->link.addr, reg, value);
+}
+
+/**
+ * ixgbe_write_cs4227 - Write CS4227 register
+ * @hw: pointer to hardware structure
+ * @reg: register number to write
+ * @value: value to write to register
+ *
+ * Returns status code
+ **/
+STATIC s32 ixgbe_write_cs4227(struct ixgbe_hw *hw, u16 reg, u16 value)
+{
+	return hw->link.ops.write_link_unlocked(hw, hw->link.addr, reg, value);
+}
+
+/**
+ * ixgbe_read_pe - Read register from port expander
+ * @hw: pointer to hardware structure
+ * @reg: register number to read
+ * @value: pointer to receive read value
+ *
+ * Returns status code
+ **/
+STATIC s32 ixgbe_read_pe(struct ixgbe_hw *hw, u8 reg, u8 *value)
+{
+	s32 status;
+
+	status = ixgbe_read_i2c_byte_unlocked(hw, reg, IXGBE_PE, value);
+	if (status != IXGBE_SUCCESS)
+		ERROR_REPORT2(IXGBE_ERROR_CAUTION,
+			      "port expander access failed with %d\n", status);
+	return status;
+}
+
+/**
+ * ixgbe_write_pe - Write register to port expander
+ * @hw: pointer to hardware structure
+ * @reg: register number to write
+ * @value: value to write
+ *
+ * Returns status code
+ **/
+STATIC s32 ixgbe_write_pe(struct ixgbe_hw *hw, u8 reg, u8 value)
+{
+	s32 status;
+
+	status = ixgbe_write_i2c_byte_unlocked(hw, reg, IXGBE_PE, value);
+	if (status != IXGBE_SUCCESS)
+		ERROR_REPORT2(IXGBE_ERROR_CAUTION,
+			      "port expander access failed with %d\n", status);
+	return status;
+}
+
+/**
+ * ixgbe_reset_cs4227 - Reset CS4227 using port expander
+ * @hw: pointer to hardware structure
+ *
+ * This function assumes that the caller has acquired the proper semaphore.
+ * Returns error code
+ **/
+STATIC s32 ixgbe_reset_cs4227(struct ixgbe_hw *hw)
+{
+	s32 status;
+	u32 retry;
+	u16 value;
+	u8 reg;
+
+	/* Trigger hard reset. */
+	status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT, &reg);
+	if (status != IXGBE_SUCCESS)
+		return status;
+	reg |= IXGBE_PE_BIT1;
+	status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT, reg);
+	if (status != IXGBE_SUCCESS)
+		return status;
+
+	status = ixgbe_read_pe(hw, IXGBE_PE_CONFIG, &reg);
+	if (status != IXGBE_SUCCESS)
+		return status;
+	reg &= ~IXGBE_PE_BIT1;
+	status = ixgbe_write_pe(hw, IXGBE_PE_CONFIG, reg);
+	if (status != IXGBE_SUCCESS)
+		return status;
+
+	status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT, &reg);
+	if (status != IXGBE_SUCCESS)
+		return status;
+	reg &= ~IXGBE_PE_BIT1;
+	status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT, reg);
+	if (status != IXGBE_SUCCESS)
+		return status;
+
+	usec_delay(IXGBE_CS4227_RESET_HOLD);
+
+	status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT, &reg);
+	if (status != IXGBE_SUCCESS)
+		return status;
+	reg |= IXGBE_PE_BIT1;
+	status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT, reg);
+	if (status != IXGBE_SUCCESS)
+		return status;
+
+	/* Wait for the reset to complete. */
+	msec_delay(IXGBE_CS4227_RESET_DELAY);
+	for (retry = 0; retry < IXGBE_CS4227_RETRIES; retry++) {
+		status = ixgbe_read_cs4227(hw, IXGBE_CS4227_EFUSE_STATUS,
+					   &value);
+		if (status == IXGBE_SUCCESS &&
+		    value == IXGBE_CS4227_EEPROM_LOAD_OK)
+			break;
+		msec_delay(IXGBE_CS4227_CHECK_DELAY);
+	}
+	if (retry == IXGBE_CS4227_RETRIES) {
+		ERROR_REPORT1(IXGBE_ERROR_INVALID_STATE,
+			"CS4227 reset did not complete.");
+		return IXGBE_ERR_PHY;
+	}
+
+	status = ixgbe_read_cs4227(hw, IXGBE_CS4227_EEPROM_STATUS, &value);
+	if (status != IXGBE_SUCCESS ||
+	    !(value & IXGBE_CS4227_EEPROM_LOAD_OK)) {
+		ERROR_REPORT1(IXGBE_ERROR_INVALID_STATE,
+			"CS4227 EEPROM did not load successfully.");
+		return IXGBE_ERR_PHY;
+	}
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_check_cs4227 - Check CS4227 and reset as needed
+ * @hw: pointer to hardware structure
+ **/
+STATIC void ixgbe_check_cs4227(struct ixgbe_hw *hw)
+{
+	s32 status = IXGBE_SUCCESS;
+	u32 swfw_mask = hw->phy.phy_semaphore_mask;
+	u16 value = 0;
+	u8 retry;
+
+	for (retry = 0; retry < IXGBE_CS4227_RETRIES; retry++) {
+		status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask);
+		if (status != IXGBE_SUCCESS) {
+			ERROR_REPORT2(IXGBE_ERROR_CAUTION,
+				"semaphore failed with %d", status);
+			msec_delay(IXGBE_CS4227_CHECK_DELAY);
+			continue;
+		}
+
+		/* Get status of reset flow. */
+		status = ixgbe_read_cs4227(hw, IXGBE_CS4227_SCRATCH, &value);
+
+		if (status == IXGBE_SUCCESS &&
+		    value == IXGBE_CS4227_RESET_COMPLETE)
+			goto out;
+
+		if (status != IXGBE_SUCCESS ||
+		    value != IXGBE_CS4227_RESET_PENDING)
+			break;
+
+		/* Reset is pending. Wait and check again. */
+		hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+		msec_delay(IXGBE_CS4227_CHECK_DELAY);
+	}
+
+	/* If still pending, assume other instance failed. */
+	if (retry == IXGBE_CS4227_RETRIES) {
+		status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask);
+		if (status != IXGBE_SUCCESS) {
+			ERROR_REPORT2(IXGBE_ERROR_CAUTION,
+				      "semaphore failed with %d", status);
+			return;
+		}
+	}
+
+	/* Reset the CS4227. */
+	status = ixgbe_reset_cs4227(hw);
+	if (status != IXGBE_SUCCESS) {
+		ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+			"CS4227 reset failed: %d", status);
+		goto out;
+	}
+
+	/* Reset takes so long, temporarily release semaphore in case the
+	 * other driver instance is waiting for the reset indication.
+	 */
+	ixgbe_write_cs4227(hw, IXGBE_CS4227_SCRATCH,
+			   IXGBE_CS4227_RESET_PENDING);
+	hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+	msec_delay(10);
+	status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask);
+	if (status != IXGBE_SUCCESS) {
+		ERROR_REPORT2(IXGBE_ERROR_CAUTION,
+			"semaphore failed with %d", status);
+		return;
+	}
+
+	/* Record completion for next time. */
+	status = ixgbe_write_cs4227(hw, IXGBE_CS4227_SCRATCH,
+		IXGBE_CS4227_RESET_COMPLETE);
+
+out:
+	hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+	msec_delay(hw->eeprom.semaphore_delay);
+}
+
+/**
+ * ixgbe_setup_mux_ctl - Setup ESDP register for I2C mux control
+ * @hw: pointer to hardware structure
+ **/
+STATIC void ixgbe_setup_mux_ctl(struct ixgbe_hw *hw)
+{
+	u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+
+	if (hw->bus.lan_id) {
+		esdp &= ~(IXGBE_ESDP_SDP1_NATIVE | IXGBE_ESDP_SDP1);
+		esdp |= IXGBE_ESDP_SDP1_DIR;
+	}
+	esdp &= ~(IXGBE_ESDP_SDP0_NATIVE | IXGBE_ESDP_SDP0_DIR);
+	IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+	IXGBE_WRITE_FLUSH(hw);
+}
+
+/**
+ * ixgbe_identify_phy_x550em - Get PHY type based on device id
+ * @hw: pointer to hardware structure
+ *
+ * Returns error code
+ */
+STATIC s32 ixgbe_identify_phy_x550em(struct ixgbe_hw *hw)
+{
+	switch (hw->device_id) {
+	case IXGBE_DEV_ID_X550EM_A_SFP:
+		hw->phy.phy_semaphore_mask = IXGBE_GSSR_TOKEN_SM;
+		if (hw->bus.lan_id)
+			hw->phy.phy_semaphore_mask |= IXGBE_GSSR_PHY1_SM;
+		else
+			hw->phy.phy_semaphore_mask |= IXGBE_GSSR_PHY0_SM;
+		return ixgbe_identify_module_generic(hw);
+	case IXGBE_DEV_ID_X550EM_X_SFP:
+		/* set up for CS4227 usage */
+		hw->phy.phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM;
+		ixgbe_setup_mux_ctl(hw);
+		ixgbe_check_cs4227(hw);
+		/* Fallthrough */
+
+	case IXGBE_DEV_ID_X550EM_A_SFP_N:
+		return ixgbe_identify_module_generic(hw);
+		break;
+	case IXGBE_DEV_ID_X550EM_X_KX4:
+		hw->phy.type = ixgbe_phy_x550em_kx4;
+		break;
+	case IXGBE_DEV_ID_X550EM_X_KR:
+	case IXGBE_DEV_ID_X550EM_A_KR:
+	case IXGBE_DEV_ID_X550EM_A_KR_L:
+		hw->phy.type = ixgbe_phy_x550em_kr;
+		break;
+	case IXGBE_DEV_ID_X550EM_X_1G_T:
+	case IXGBE_DEV_ID_X550EM_X_10G_T:
+	case IXGBE_DEV_ID_X550EM_A_1G_T:
+	case IXGBE_DEV_ID_X550EM_A_1G_T_L:
+	case IXGBE_DEV_ID_X550EM_A_10G_T:
+		return ixgbe_identify_phy_generic(hw);
+	default:
+		break;
+	}
+	return IXGBE_SUCCESS;
+}
+
+STATIC s32 ixgbe_read_phy_reg_x550em(struct ixgbe_hw *hw, u32 reg_addr,
+				     u32 device_type, u16 *phy_data)
+{
+	UNREFERENCED_4PARAMETER(*hw, reg_addr, device_type, *phy_data);
+	return IXGBE_NOT_IMPLEMENTED;
+}
+
+STATIC s32 ixgbe_write_phy_reg_x550em(struct ixgbe_hw *hw, u32 reg_addr,
+				      u32 device_type, u16 phy_data)
+{
+	UNREFERENCED_4PARAMETER(*hw, reg_addr, device_type, phy_data);
+	return IXGBE_NOT_IMPLEMENTED;
+}
+
+/**
+ * ixgbe_read_i2c_combined_generic - Perform I2C read combined operation
+ * @hw: pointer to the hardware structure
+ * @addr: I2C bus address to read from
+ * @reg: I2C device register to read from
+ * @val: pointer to location to receive read value
+ *
+ * Returns an error code on error.
+ **/
+static s32 ixgbe_read_i2c_combined_generic(struct ixgbe_hw *hw, u8 addr,
+					   u16 reg, u16 *val)
+{
+	return ixgbe_read_i2c_combined_generic_int(hw, addr, reg, val, true);
+}
+
+/**
+ * ixgbe_read_i2c_combined_generic_unlocked - Do I2C read combined operation
+ * @hw: pointer to the hardware structure
+ * @addr: I2C bus address to read from
+ * @reg: I2C device register to read from
+ * @val: pointer to location to receive read value
+ *
+ * Returns an error code on error.
+ **/
+static s32
+ixgbe_read_i2c_combined_generic_unlocked(struct ixgbe_hw *hw, u8 addr,
+					 u16 reg, u16 *val)
+{
+	return ixgbe_read_i2c_combined_generic_int(hw, addr, reg, val, false);
+}
+
+/**
+ * ixgbe_write_i2c_combined_generic - Perform I2C write combined operation
+ * @hw: pointer to the hardware structure
+ * @addr: I2C bus address to write to
+ * @reg: I2C device register to write to
+ * @val: value to write
+ *
+ * Returns an error code on error.
+ **/
+static s32 ixgbe_write_i2c_combined_generic(struct ixgbe_hw *hw,
+					    u8 addr, u16 reg, u16 val)
+{
+	return ixgbe_write_i2c_combined_generic_int(hw, addr, reg, val, true);
+}
+
+/**
+ * ixgbe_write_i2c_combined_generic_unlocked - Do I2C write combined operation
+ * @hw: pointer to the hardware structure
+ * @addr: I2C bus address to write to
+ * @reg: I2C device register to write to
+ * @val: value to write
+ *
+ * Returns an error code on error.
+ **/
+static s32
+ixgbe_write_i2c_combined_generic_unlocked(struct ixgbe_hw *hw,
+					  u8 addr, u16 reg, u16 val)
+{
+	return ixgbe_write_i2c_combined_generic_int(hw, addr, reg, val, false);
+}
+
+/**
+*  ixgbe_init_ops_X550EM - Inits func ptrs and MAC type
+*  @hw: pointer to hardware structure
+*
+*  Initialize the function pointers and for MAC type X550EM.
+*  Does not touch the hardware.
+**/
+s32 ixgbe_init_ops_X550EM(struct ixgbe_hw *hw)
+{
+	struct ixgbe_mac_info *mac = &hw->mac;
+	struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+	struct ixgbe_phy_info *phy = &hw->phy;
+	struct ixgbe_link_info *link = &hw->link;
+	s32 ret_val;
+
+	DEBUGFUNC("ixgbe_init_ops_X550EM");
+
+	/* Similar to X550 so start there. */
+	ret_val = ixgbe_init_ops_X550(hw);
+
+	/* Since this function eventually calls
+	 * ixgbe_init_ops_540 by design, we are setting
+	 * the pointers to NULL explicitly here to overwrite
+	 * the values being set in the x540 function.
+	 */
+	/* Thermal sensor not supported in x550EM */
+	mac->ops.get_thermal_sensor_data = NULL;
+	mac->ops.init_thermal_sensor_thresh = NULL;
+	mac->thermal_sensor_enabled = false;
+
+	/* FCOE not supported in x550EM */
+	mac->ops.get_san_mac_addr = NULL;
+	mac->ops.set_san_mac_addr = NULL;
+	mac->ops.get_wwn_prefix = NULL;
+	mac->ops.get_fcoe_boot_status = NULL;
+
+	/* IPsec not supported in x550EM */
+	mac->ops.disable_sec_rx_path = NULL;
+	mac->ops.enable_sec_rx_path = NULL;
+
+	/* AUTOC register is not present in x550EM. */
+	mac->ops.prot_autoc_read = NULL;
+	mac->ops.prot_autoc_write = NULL;
+
+	/* X550EM bus type is internal*/
+	hw->bus.type = ixgbe_bus_type_internal;
+	mac->ops.get_bus_info = ixgbe_get_bus_info_X550em;
+
+	if (hw->mac.type == ixgbe_mac_X550EM_x) {
+		mac->ops.read_iosf_sb_reg = ixgbe_read_iosf_sb_reg_x550;
+		mac->ops.write_iosf_sb_reg = ixgbe_write_iosf_sb_reg_x550;
+		mac->ops.acquire_swfw_sync = ixgbe_acquire_swfw_sync_X550em;
+		mac->ops.release_swfw_sync = ixgbe_release_swfw_sync_X550em;
+		link->ops.read_link = ixgbe_read_i2c_combined_generic;
+		link->ops.read_link_unlocked =
+				ixgbe_read_i2c_combined_generic_unlocked;
+		link->ops.write_link = ixgbe_write_i2c_combined_generic;
+		link->ops.write_link_unlocked =
+				ixgbe_write_i2c_combined_generic_unlocked;
+		link->addr = IXGBE_CS4227;
+	}
+	if (hw->mac.type == ixgbe_mac_X550EM_a) {
+		mac->ops.read_iosf_sb_reg = ixgbe_read_iosf_sb_reg_x550a;
+		mac->ops.write_iosf_sb_reg = ixgbe_write_iosf_sb_reg_x550a;
+		mac->ops.acquire_swfw_sync = ixgbe_acquire_swfw_sync_X550a;
+		mac->ops.release_swfw_sync = ixgbe_release_swfw_sync_X550a;
+	}
+
+	mac->ops.get_media_type = ixgbe_get_media_type_X550em;
+	mac->ops.setup_sfp = ixgbe_setup_sfp_modules_X550em;
+	mac->ops.get_link_capabilities = ixgbe_get_link_capabilities_X550em;
+	mac->ops.reset_hw = ixgbe_reset_hw_X550em;
+	mac->ops.get_supported_physical_layer =
+				    ixgbe_get_supported_physical_layer_X550em;
+
+	if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper)
+		mac->ops.setup_fc = ixgbe_setup_fc_generic;
+	else
+		mac->ops.setup_fc = ixgbe_setup_fc_X550em;
+
+
+	if (hw->device_id != IXGBE_DEV_ID_X550EM_X_KR)
+		mac->ops.setup_eee = NULL;
+
+	/* PHY */
+	phy->ops.init = ixgbe_init_phy_ops_X550em;
+	phy->ops.identify = ixgbe_identify_phy_x550em;
+	if (mac->ops.get_media_type(hw) != ixgbe_media_type_copper)
+		phy->ops.set_phy_power = NULL;
+
+
+	/* EEPROM */
+	eeprom->ops.init_params = ixgbe_init_eeprom_params_X540;
+	eeprom->ops.read = ixgbe_read_ee_hostif_X550;
+	eeprom->ops.read_buffer = ixgbe_read_ee_hostif_buffer_X550;
+	eeprom->ops.write = ixgbe_write_ee_hostif_X550;
+	eeprom->ops.write_buffer = ixgbe_write_ee_hostif_buffer_X550;
+	eeprom->ops.update_checksum = ixgbe_update_eeprom_checksum_X550;
+	eeprom->ops.validate_checksum = ixgbe_validate_eeprom_checksum_X550;
+	eeprom->ops.calc_checksum = ixgbe_calc_eeprom_checksum_X550;
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_dmac_config_X550
+ *  @hw: pointer to hardware structure
+ *
+ *  Configure DMA coalescing. If enabling dmac, dmac is activated.
+ *  When disabling dmac, dmac enable dmac bit is cleared.
+ **/
+s32 ixgbe_dmac_config_X550(struct ixgbe_hw *hw)
+{
+	u32 reg, high_pri_tc;
+
+	DEBUGFUNC("ixgbe_dmac_config_X550");
+
+	/* Disable DMA coalescing before configuring */
+	reg = IXGBE_READ_REG(hw, IXGBE_DMACR);
+	reg &= ~IXGBE_DMACR_DMAC_EN;
+	IXGBE_WRITE_REG(hw, IXGBE_DMACR, reg);
+
+	/* Disable DMA Coalescing if the watchdog timer is 0 */
+	if (!hw->mac.dmac_config.watchdog_timer)
+		goto out;
+
+	ixgbe_dmac_config_tcs_X550(hw);
+
+	/* Configure DMA Coalescing Control Register */
+	reg = IXGBE_READ_REG(hw, IXGBE_DMACR);
+
+	/* Set the watchdog timer in units of 40.96 usec */
+	reg &= ~IXGBE_DMACR_DMACWT_MASK;
+	reg |= (hw->mac.dmac_config.watchdog_timer * 100) / 4096;
+
+	reg &= ~IXGBE_DMACR_HIGH_PRI_TC_MASK;
+	/* If fcoe is enabled, set high priority traffic class */
+	if (hw->mac.dmac_config.fcoe_en) {
+		high_pri_tc = 1 << hw->mac.dmac_config.fcoe_tc;
+		reg |= ((high_pri_tc << IXGBE_DMACR_HIGH_PRI_TC_SHIFT) &
+			IXGBE_DMACR_HIGH_PRI_TC_MASK);
+	}
+	reg |= IXGBE_DMACR_EN_MNG_IND;
+
+	/* Enable DMA coalescing after configuration */
+	reg |= IXGBE_DMACR_DMAC_EN;
+	IXGBE_WRITE_REG(hw, IXGBE_DMACR, reg);
+
+out:
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_dmac_config_tcs_X550
+ *  @hw: pointer to hardware structure
+ *
+ *  Configure DMA coalescing threshold per TC. The dmac enable bit must
+ *  be cleared before configuring.
+ **/
+s32 ixgbe_dmac_config_tcs_X550(struct ixgbe_hw *hw)
+{
+	u32 tc, reg, pb_headroom, rx_pb_size, maxframe_size_kb;
+
+	DEBUGFUNC("ixgbe_dmac_config_tcs_X550");
+
+	/* Configure DMA coalescing enabled */
+	switch (hw->mac.dmac_config.link_speed) {
+	case IXGBE_LINK_SPEED_100_FULL:
+		pb_headroom = IXGBE_DMACRXT_100M;
+		break;
+	case IXGBE_LINK_SPEED_1GB_FULL:
+		pb_headroom = IXGBE_DMACRXT_1G;
+		break;
+	default:
+		pb_headroom = IXGBE_DMACRXT_10G;
+		break;
+	}
+
+	maxframe_size_kb = ((IXGBE_READ_REG(hw, IXGBE_MAXFRS) >>
+			     IXGBE_MHADD_MFS_SHIFT) / 1024);
+
+	/* Set the per Rx packet buffer receive threshold */
+	for (tc = 0; tc < IXGBE_DCB_MAX_TRAFFIC_CLASS; tc++) {
+		reg = IXGBE_READ_REG(hw, IXGBE_DMCTH(tc));
+		reg &= ~IXGBE_DMCTH_DMACRXT_MASK;
+
+		if (tc < hw->mac.dmac_config.num_tcs) {
+			/* Get Rx PB size */
+			rx_pb_size = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(tc));
+			rx_pb_size = (rx_pb_size & IXGBE_RXPBSIZE_MASK) >>
+				IXGBE_RXPBSIZE_SHIFT;
+
+			/* Calculate receive buffer threshold in kilobytes */
+			if (rx_pb_size > pb_headroom)
+				rx_pb_size = rx_pb_size - pb_headroom;
+			else
+				rx_pb_size = 0;
+
+			/* Minimum of MFS shall be set for DMCTH */
+			reg |= (rx_pb_size > maxframe_size_kb) ?
+				rx_pb_size : maxframe_size_kb;
+		}
+		IXGBE_WRITE_REG(hw, IXGBE_DMCTH(tc), reg);
+	}
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_dmac_update_tcs_X550
+ *  @hw: pointer to hardware structure
+ *
+ *  Disables dmac, updates per TC settings, and then enables dmac.
+ **/
+s32 ixgbe_dmac_update_tcs_X550(struct ixgbe_hw *hw)
+{
+	u32 reg;
+
+	DEBUGFUNC("ixgbe_dmac_update_tcs_X550");
+
+	/* Disable DMA coalescing before configuring */
+	reg = IXGBE_READ_REG(hw, IXGBE_DMACR);
+	reg &= ~IXGBE_DMACR_DMAC_EN;
+	IXGBE_WRITE_REG(hw, IXGBE_DMACR, reg);
+
+	ixgbe_dmac_config_tcs_X550(hw);
+
+	/* Enable DMA coalescing after configuration */
+	reg = IXGBE_READ_REG(hw, IXGBE_DMACR);
+	reg |= IXGBE_DMACR_DMAC_EN;
+	IXGBE_WRITE_REG(hw, IXGBE_DMACR, reg);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_init_eeprom_params_X550 - Initialize EEPROM params
+ *  @hw: pointer to hardware structure
+ *
+ *  Initializes the EEPROM parameters ixgbe_eeprom_info within the
+ *  ixgbe_hw struct in order to set up EEPROM access.
+ **/
+s32 ixgbe_init_eeprom_params_X550(struct ixgbe_hw *hw)
+{
+	struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+	u32 eec;
+	u16 eeprom_size;
+
+	DEBUGFUNC("ixgbe_init_eeprom_params_X550");
+
+	if (eeprom->type == ixgbe_eeprom_uninitialized) {
+		eeprom->semaphore_delay = 10;
+		eeprom->type = ixgbe_flash;
+
+		eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+		eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >>
+				    IXGBE_EEC_SIZE_SHIFT);
+		eeprom->word_size = 1 << (eeprom_size +
+					  IXGBE_EEPROM_WORD_SIZE_SHIFT);
+
+		DEBUGOUT2("Eeprom params: type = %d, size = %d\n",
+			  eeprom->type, eeprom->word_size);
+	}
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_setup_eee_X550 - Enable/disable EEE support
+ *  @hw: pointer to the HW structure
+ *  @enable_eee: boolean flag to enable EEE
+ *
+ *  Enable/disable EEE based on enable_eee flag.
+ *  Auto-negotiation must be started after BASE-T EEE bits in PHY register 7.3C
+ *  are modified.
+ *
+ **/
+s32 ixgbe_setup_eee_X550(struct ixgbe_hw *hw, bool enable_eee)
+{
+	u32 eeer;
+	u16 autoneg_eee_reg;
+	u32 link_reg;
+	s32 status;
+
+	DEBUGFUNC("ixgbe_setup_eee_X550");
+
+	eeer = IXGBE_READ_REG(hw, IXGBE_EEER);
+	/* Enable or disable EEE per flag */
+	if (enable_eee) {
+		eeer |= (IXGBE_EEER_TX_LPI_EN | IXGBE_EEER_RX_LPI_EN);
+
+		if (hw->mac.type == ixgbe_mac_X550) {
+			/* Advertise EEE capability */
+			hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_EEE_ADVT,
+				IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_eee_reg);
+
+			autoneg_eee_reg |= (IXGBE_AUTO_NEG_10GBASE_EEE_ADVT |
+				IXGBE_AUTO_NEG_1000BASE_EEE_ADVT |
+				IXGBE_AUTO_NEG_100BASE_EEE_ADVT);
+
+			hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_EEE_ADVT,
+				IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_eee_reg);
+		} else if (hw->device_id == IXGBE_DEV_ID_X550EM_X_KR) {
+			/* Not supported on first revision of X550EM_x. */
+			if ((hw->mac.type == ixgbe_mac_X550EM_x) &&
+			    !(IXGBE_FUSES0_REV_MASK &
+			      IXGBE_READ_REG(hw, IXGBE_FUSES0_GROUP(0))))
+				return IXGBE_SUCCESS;
+
+			status = ixgbe_read_iosf_sb_reg_x550(hw,
+				IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, &link_reg);
+			if (status != IXGBE_SUCCESS)
+				return status;
+
+			link_reg |= IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KR |
+				    IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KX;
+
+			/* Don't advertise FEC capability when EEE enabled. */
+			link_reg &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_FEC;
+
+			status = ixgbe_write_iosf_sb_reg_x550(hw,
+				IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, link_reg);
+			if (status != IXGBE_SUCCESS)
+				return status;
+		}
+	} else {
+		eeer &= ~(IXGBE_EEER_TX_LPI_EN | IXGBE_EEER_RX_LPI_EN);
+
+		if (hw->mac.type == ixgbe_mac_X550) {
+			/* Disable advertised EEE capability */
+			hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_EEE_ADVT,
+				IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_eee_reg);
+
+			autoneg_eee_reg &= ~(IXGBE_AUTO_NEG_10GBASE_EEE_ADVT |
+				IXGBE_AUTO_NEG_1000BASE_EEE_ADVT |
+				IXGBE_AUTO_NEG_100BASE_EEE_ADVT);
+
+			hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_EEE_ADVT,
+				IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_eee_reg);
+		} else if (hw->device_id == IXGBE_DEV_ID_X550EM_X_KR) {
+			status = ixgbe_read_iosf_sb_reg_x550(hw,
+				IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, &link_reg);
+			if (status != IXGBE_SUCCESS)
+				return status;
+
+			link_reg &= ~(IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KR |
+				IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KX);
+
+			/* Advertise FEC capability when EEE is disabled. */
+			link_reg |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_FEC;
+
+			status = ixgbe_write_iosf_sb_reg_x550(hw,
+				IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, link_reg);
+			if (status != IXGBE_SUCCESS)
+				return status;
+		}
+	}
+	IXGBE_WRITE_REG(hw, IXGBE_EEER, eeer);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_set_source_address_pruning_X550 - Enable/Disbale source address pruning
+ * @hw: pointer to hardware structure
+ * @enable: enable or disable source address pruning
+ * @pool: Rx pool to set source address pruning for
+ **/
+void ixgbe_set_source_address_pruning_X550(struct ixgbe_hw *hw, bool enable,
+					   unsigned int pool)
+{
+	u64 pfflp;
+
+	/* max rx pool is 63 */
+	if (pool > 63)
+		return;
+
+	pfflp = (u64)IXGBE_READ_REG(hw, IXGBE_PFFLPL);
+	pfflp |= (u64)IXGBE_READ_REG(hw, IXGBE_PFFLPH) << 32;
+
+	if (enable)
+		pfflp |= (1ULL << pool);
+	else
+		pfflp &= ~(1ULL << pool);
+
+	IXGBE_WRITE_REG(hw, IXGBE_PFFLPL, (u32)pfflp);
+	IXGBE_WRITE_REG(hw, IXGBE_PFFLPH, (u32)(pfflp >> 32));
+}
+
+/**
+ *  ixgbe_set_ethertype_anti_spoofing_X550 - Enable/Disable Ethertype anti-spoofing
+ *  @hw: pointer to hardware structure
+ *  @enable: enable or disable switch for Ethertype anti-spoofing
+ *  @vf: Virtual Function pool - VF Pool to set for Ethertype anti-spoofing
+ *
+ **/
+void ixgbe_set_ethertype_anti_spoofing_X550(struct ixgbe_hw *hw,
+		bool enable, int vf)
+{
+	int vf_target_reg = vf >> 3;
+	int vf_target_shift = vf % 8 + IXGBE_SPOOF_ETHERTYPEAS_SHIFT;
+	u32 pfvfspoof;
+
+	DEBUGFUNC("ixgbe_set_ethertype_anti_spoofing_X550");
+
+	pfvfspoof = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg));
+	if (enable)
+		pfvfspoof |= (1 << vf_target_shift);
+	else
+		pfvfspoof &= ~(1 << vf_target_shift);
+
+	IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg), pfvfspoof);
+}
+
+/**
+ * ixgbe_iosf_wait - Wait for IOSF command completion
+ * @hw: pointer to hardware structure
+ * @ctrl: pointer to location to receive final IOSF control value
+ *
+ * Returns failing status on timeout
+ *
+ * Note: ctrl can be NULL if the IOSF control register value is not needed
+ **/
+STATIC s32 ixgbe_iosf_wait(struct ixgbe_hw *hw, u32 *ctrl)
+{
+	u32 i, command = 0;
+
+	/* Check every 10 usec to see if the address cycle completed.
+	 * The SB IOSF BUSY bit will clear when the operation is
+	 * complete
+	 */
+	for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
+		command = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL);
+		if ((command & IXGBE_SB_IOSF_CTRL_BUSY) == 0)
+			break;
+		usec_delay(10);
+	}
+	if (ctrl)
+		*ctrl = command;
+	if (i == IXGBE_MDIO_COMMAND_TIMEOUT) {
+		ERROR_REPORT1(IXGBE_ERROR_POLLING, "Wait timed out\n");
+		return IXGBE_ERR_PHY;
+	}
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_write_iosf_sb_reg_x550 - Writes a value to specified register of the IOSF
+ *  device
+ *  @hw: pointer to hardware structure
+ *  @reg_addr: 32 bit PHY register to write
+ *  @device_type: 3 bit device type
+ *  @data: Data to write to the register
+ **/
+s32 ixgbe_write_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr,
+			    u32 device_type, u32 data)
+{
+	u32 gssr = IXGBE_GSSR_PHY1_SM | IXGBE_GSSR_PHY0_SM;
+	u32 command, error;
+	s32 ret;
+
+	ret = ixgbe_acquire_swfw_semaphore(hw, gssr);
+	if (ret != IXGBE_SUCCESS)
+		return ret;
+
+	ret = ixgbe_iosf_wait(hw, NULL);
+	if (ret != IXGBE_SUCCESS)
+		goto out;
+
+	command = ((reg_addr << IXGBE_SB_IOSF_CTRL_ADDR_SHIFT) |
+		   (device_type << IXGBE_SB_IOSF_CTRL_TARGET_SELECT_SHIFT));
+
+	/* Write IOSF control register */
+	IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL, command);
+
+	/* Write IOSF data register */
+	IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_DATA, data);
+
+	ret = ixgbe_iosf_wait(hw, &command);
+
+	if ((command & IXGBE_SB_IOSF_CTRL_RESP_STAT_MASK) != 0) {
+		error = (command & IXGBE_SB_IOSF_CTRL_CMPL_ERR_MASK) >>
+			 IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT;
+		ERROR_REPORT2(IXGBE_ERROR_POLLING,
+			      "Failed to write, error %x\n", error);
+		ret = IXGBE_ERR_PHY;
+	}
+
+out:
+	ixgbe_release_swfw_semaphore(hw, gssr);
+	return ret;
+}
+
+/**
+ *  ixgbe_read_iosf_sb_reg_x550 - Writes a value to specified register of the IOSF
+ *  device
+ *  @hw: pointer to hardware structure
+ *  @reg_addr: 32 bit PHY register to write
+ *  @device_type: 3 bit device type
+ *  @phy_data: Pointer to read data from the register
+ **/
+s32 ixgbe_read_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr,
+			   u32 device_type, u32 *data)
+{
+	u32 gssr = IXGBE_GSSR_PHY1_SM | IXGBE_GSSR_PHY0_SM;
+	u32 command, error;
+	s32 ret;
+
+	ret = ixgbe_acquire_swfw_semaphore(hw, gssr);
+	if (ret != IXGBE_SUCCESS)
+		return ret;
+
+	ret = ixgbe_iosf_wait(hw, NULL);
+	if (ret != IXGBE_SUCCESS)
+		goto out;
+
+	command = ((reg_addr << IXGBE_SB_IOSF_CTRL_ADDR_SHIFT) |
+		   (device_type << IXGBE_SB_IOSF_CTRL_TARGET_SELECT_SHIFT));
+
+	/* Write IOSF control register */
+	IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL, command);
+
+	ret = ixgbe_iosf_wait(hw, &command);
+
+	if ((command & IXGBE_SB_IOSF_CTRL_RESP_STAT_MASK) != 0) {
+		error = (command & IXGBE_SB_IOSF_CTRL_CMPL_ERR_MASK) >>
+			 IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT;
+		ERROR_REPORT2(IXGBE_ERROR_POLLING,
+				"Failed to read, error %x\n", error);
+		ret = IXGBE_ERR_PHY;
+	}
+
+	if (ret == IXGBE_SUCCESS)
+		*data = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_DATA);
+
+out:
+	ixgbe_release_swfw_semaphore(hw, gssr);
+	return ret;
+}
+
+/**
+ * ixgbe_get_phy_token - Get the token for shared phy access
+ * @hw: Pointer to hardware structure
+ */
+
+s32 ixgbe_get_phy_token(struct ixgbe_hw *hw)
+{
+	struct ixgbe_hic_phy_token_req token_cmd;
+	s32 status;
+
+	token_cmd.hdr.cmd = FW_PHY_TOKEN_REQ_CMD;
+	token_cmd.hdr.buf_len = FW_PHY_TOKEN_REQ_LEN;
+	token_cmd.hdr.cmd_or_resp.cmd_resv = 0;
+	token_cmd.port_number = hw->bus.lan_id;
+	token_cmd.command_type = FW_PHY_TOKEN_REQ;
+	token_cmd.pad = 0;
+	status = ixgbe_host_interface_command(hw, (u32 *)&token_cmd,
+					      sizeof(token_cmd),
+					      IXGBE_HI_COMMAND_TIMEOUT,
+					      true);
+	if (status)
+		return status;
+	if (token_cmd.hdr.cmd_or_resp.ret_status == FW_PHY_TOKEN_OK)
+		return IXGBE_SUCCESS;
+	if (token_cmd.hdr.cmd_or_resp.ret_status != FW_PHY_TOKEN_RETRY)
+		return IXGBE_ERR_FW_RESP_INVALID;
+
+	return IXGBE_ERR_TOKEN_RETRY;
+}
+
+/**
+ * ixgbe_put_phy_token - Put the token for shared phy access
+ * @hw: Pointer to hardware structure
+ */
+
+s32 ixgbe_put_phy_token(struct ixgbe_hw *hw)
+{
+	struct ixgbe_hic_phy_token_req token_cmd;
+	s32 status;
+
+	token_cmd.hdr.cmd = FW_PHY_TOKEN_REQ_CMD;
+	token_cmd.hdr.buf_len = FW_PHY_TOKEN_REQ_LEN;
+	token_cmd.hdr.cmd_or_resp.cmd_resv = 0;
+	token_cmd.port_number = hw->bus.lan_id;
+	token_cmd.command_type = FW_PHY_TOKEN_REL;
+	token_cmd.pad = 0;
+	status = ixgbe_host_interface_command(hw, (u32 *)&token_cmd,
+					      sizeof(token_cmd),
+					      IXGBE_HI_COMMAND_TIMEOUT,
+					      true);
+	if (status)
+		return status;
+	if (token_cmd.hdr.cmd_or_resp.ret_status == FW_PHY_TOKEN_OK)
+		return IXGBE_SUCCESS;
+	return IXGBE_ERR_FW_RESP_INVALID;
+}
+
+/**
+ *  ixgbe_write_iosf_sb_reg_x550a - Writes a value to specified register
+ *  of the IOSF device
+ *  @hw: pointer to hardware structure
+ *  @reg_addr: 32 bit PHY register to write
+ *  @device_type: 3 bit device type
+ *  @data: Data to write to the register
+ **/
+s32 ixgbe_write_iosf_sb_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr,
+	u32 device_type, u32 data)
+{
+	struct ixgbe_hic_internal_phy_req write_cmd;
+	s32 status;
+	UNREFERENCED_1PARAMETER(device_type);
+
+	write_cmd.hdr.cmd = FW_INT_PHY_REQ_CMD;
+	write_cmd.hdr.buf_len = FW_INT_PHY_REQ_LEN;
+	write_cmd.port_number = hw->bus.lan_id;
+	write_cmd.command_type = FW_INT_PHY_REQ_WRITE;
+	write_cmd.address = (u16)reg_addr;
+	write_cmd.rsv1 = 0;
+	write_cmd.write_data = data;
+	write_cmd.pad = 0;
+
+	status = ixgbe_host_interface_command(hw, (u32 *)&write_cmd,
+		sizeof(write_cmd), IXGBE_HI_COMMAND_TIMEOUT, false);
+
+	return status;
+}
+
+/**
+ *  ixgbe_read_iosf_sb_reg_x550a - Writes a value to specified register
+ *  of the IOSF device.
+ *  @hw: pointer to hardware structure
+ *  @reg_addr: 32 bit PHY register to write
+ *  @device_type: 3 bit device type
+ *  @data: Pointer to read data from the register
+ **/
+s32 ixgbe_read_iosf_sb_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr,
+	u32 device_type, u32 *data)
+{
+	struct ixgbe_hic_internal_phy_req read_cmd;
+	s32 status;
+	UNREFERENCED_1PARAMETER(device_type);
+
+	read_cmd.hdr.cmd = FW_INT_PHY_REQ_CMD;
+	read_cmd.hdr.buf_len = FW_INT_PHY_REQ_LEN;
+	read_cmd.port_number = hw->bus.lan_id;
+	read_cmd.command_type = FW_INT_PHY_REQ_READ;
+	read_cmd.address = (u16)reg_addr;
+	read_cmd.rsv1 = 0;
+	read_cmd.write_data = 0;
+	read_cmd.pad = 0;
+
+	status = ixgbe_host_interface_command(hw, (u32 *)&read_cmd,
+		sizeof(read_cmd), IXGBE_HI_COMMAND_TIMEOUT, true);
+
+	/* Extract the register value from the response. */
+	*data = ((struct ixgbe_hic_internal_phy_resp *)&read_cmd)->read_data;
+
+	return status;
+}
+
+/**
+ *  ixgbe_disable_mdd_X550
+ *  @hw: pointer to hardware structure
+ *
+ *  Disable malicious driver detection
+ **/
+void ixgbe_disable_mdd_X550(struct ixgbe_hw *hw)
+{
+	u32 reg;
+
+	DEBUGFUNC("ixgbe_disable_mdd_X550");
+
+	/* Disable MDD for TX DMA and interrupt */
+	reg = IXGBE_READ_REG(hw, IXGBE_DMATXCTL);
+	reg &= ~(IXGBE_DMATXCTL_MDP_EN | IXGBE_DMATXCTL_MBINTEN);
+	IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL, reg);
+
+	/* Disable MDD for RX and interrupt */
+	reg = IXGBE_READ_REG(hw, IXGBE_RDRXCTL);
+	reg &= ~(IXGBE_RDRXCTL_MDP_EN | IXGBE_RDRXCTL_MBINTEN);
+	IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, reg);
+}
+
+/**
+ *  ixgbe_enable_mdd_X550
+ *  @hw: pointer to hardware structure
+ *
+ *  Enable malicious driver detection
+ **/
+void ixgbe_enable_mdd_X550(struct ixgbe_hw *hw)
+{
+	u32 reg;
+
+	DEBUGFUNC("ixgbe_enable_mdd_X550");
+
+	/* Enable MDD for TX DMA and interrupt */
+	reg = IXGBE_READ_REG(hw, IXGBE_DMATXCTL);
+	reg |= (IXGBE_DMATXCTL_MDP_EN | IXGBE_DMATXCTL_MBINTEN);
+	IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL, reg);
+
+	/* Enable MDD for RX and interrupt */
+	reg = IXGBE_READ_REG(hw, IXGBE_RDRXCTL);
+	reg |= (IXGBE_RDRXCTL_MDP_EN | IXGBE_RDRXCTL_MBINTEN);
+	IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, reg);
+}
+
+/**
+ *  ixgbe_restore_mdd_vf_X550
+ *  @hw: pointer to hardware structure
+ *  @vf: vf index
+ *
+ *  Restore VF that was disabled during malicious driver detection event
+ **/
+void ixgbe_restore_mdd_vf_X550(struct ixgbe_hw *hw, u32 vf)
+{
+	u32 idx, reg, num_qs, start_q, bitmask;
+
+	DEBUGFUNC("ixgbe_restore_mdd_vf_X550");
+
+	/* Map VF to queues */
+	reg = IXGBE_READ_REG(hw, IXGBE_MRQC);
+	switch (reg & IXGBE_MRQC_MRQE_MASK) {
+	case IXGBE_MRQC_VMDQRT8TCEN:
+		num_qs = 8;  /* 16 VFs / pools */
+		bitmask = 0x000000FF;
+		break;
+	case IXGBE_MRQC_VMDQRSS32EN:
+	case IXGBE_MRQC_VMDQRT4TCEN:
+		num_qs = 4;  /* 32 VFs / pools */
+		bitmask = 0x0000000F;
+		break;
+	default:            /* 64 VFs / pools */
+		num_qs = 2;
+		bitmask = 0x00000003;
+		break;
+	}
+	start_q = vf * num_qs;
+
+	/* Release vf's queues by clearing WQBR_TX and WQBR_RX (RW1C) */
+	idx = start_q / 32;
+	reg = 0;
+	reg |= (bitmask << (start_q % 32));
+	IXGBE_WRITE_REG(hw, IXGBE_WQBR_TX(idx), reg);
+	IXGBE_WRITE_REG(hw, IXGBE_WQBR_RX(idx), reg);
+}
+
+/**
+ *  ixgbe_mdd_event_X550
+ *  @hw: pointer to hardware structure
+ *  @vf_bitmap: vf bitmap of malicious vfs
+ *
+ *  Handle malicious driver detection event.
+ **/
+void ixgbe_mdd_event_X550(struct ixgbe_hw *hw, u32 *vf_bitmap)
+{
+	u32 wqbr;
+	u32 i, j, reg, q, shift, vf, idx;
+
+	DEBUGFUNC("ixgbe_mdd_event_X550");
+
+	/* figure out pool size for mapping to vf's */
+	reg = IXGBE_READ_REG(hw, IXGBE_MRQC);
+	switch (reg & IXGBE_MRQC_MRQE_MASK) {
+	case IXGBE_MRQC_VMDQRT8TCEN:
+		shift = 3;  /* 16 VFs / pools */
+		break;
+	case IXGBE_MRQC_VMDQRSS32EN:
+	case IXGBE_MRQC_VMDQRT4TCEN:
+		shift = 2;  /* 32 VFs / pools */
+		break;
+	default:
+		shift = 1;  /* 64 VFs / pools */
+		break;
+	}
+
+	/* Read WQBR_TX and WQBR_RX and check for malicious queues */
+	for (i = 0; i < 4; i++) {
+		wqbr = IXGBE_READ_REG(hw, IXGBE_WQBR_TX(i));
+		wqbr |= IXGBE_READ_REG(hw, IXGBE_WQBR_RX(i));
+
+		if (!wqbr)
+			continue;
+
+		/* Get malicious queue */
+		for (j = 0; j < 32 && wqbr; j++) {
+
+			if (!(wqbr & (1 << j)))
+				continue;
+
+			/* Get queue from bitmask */
+			q = j + (i * 32);
+
+			/* Map queue to vf */
+			vf = (q >> shift);
+
+			/* Set vf bit in vf_bitmap */
+			idx = vf / 32;
+			vf_bitmap[idx] |= (1 << (vf % 32));
+			wqbr &= ~(1 << j);
+		}
+	}
+}
+
+/**
+ *  ixgbe_get_media_type_X550em - Get media type
+ *  @hw: pointer to hardware structure
+ *
+ *  Returns the media type (fiber, copper, backplane)
+ */
+enum ixgbe_media_type ixgbe_get_media_type_X550em(struct ixgbe_hw *hw)
+{
+	enum ixgbe_media_type media_type;
+
+	DEBUGFUNC("ixgbe_get_media_type_X550em");
+
+	/* Detect if there is a copper PHY attached. */
+	switch (hw->device_id) {
+	case IXGBE_DEV_ID_X550EM_X_KR:
+	case IXGBE_DEV_ID_X550EM_X_KX4:
+	case IXGBE_DEV_ID_X550EM_A_KR:
+	case IXGBE_DEV_ID_X550EM_A_KR_L:
+		media_type = ixgbe_media_type_backplane;
+		break;
+	case IXGBE_DEV_ID_X550EM_X_SFP:
+	case IXGBE_DEV_ID_X550EM_A_SFP:
+	case IXGBE_DEV_ID_X550EM_A_SFP_N:
+	case IXGBE_DEV_ID_X550EM_A_QSFP:
+	case IXGBE_DEV_ID_X550EM_A_QSFP_N:
+		media_type = ixgbe_media_type_fiber;
+		break;
+	case IXGBE_DEV_ID_X550EM_X_1G_T:
+	case IXGBE_DEV_ID_X550EM_X_10G_T:
+	case IXGBE_DEV_ID_X550EM_A_1G_T:
+	case IXGBE_DEV_ID_X550EM_A_1G_T_L:
+	case IXGBE_DEV_ID_X550EM_A_10G_T:
+		media_type = ixgbe_media_type_copper;
+		break;
+	default:
+		media_type = ixgbe_media_type_unknown;
+		break;
+	}
+	return media_type;
+}
+
+/**
+ *  ixgbe_supported_sfp_modules_X550em - Check if SFP module type is supported
+ *  @hw: pointer to hardware structure
+ *  @linear: true if SFP module is linear
+ */
+STATIC s32 ixgbe_supported_sfp_modules_X550em(struct ixgbe_hw *hw, bool *linear)
+{
+	DEBUGFUNC("ixgbe_supported_sfp_modules_X550em");
+
+	switch (hw->phy.sfp_type) {
+	case ixgbe_sfp_type_not_present:
+		return IXGBE_ERR_SFP_NOT_PRESENT;
+	case ixgbe_sfp_type_da_cu_core0:
+	case ixgbe_sfp_type_da_cu_core1:
+		*linear = true;
+		break;
+	case ixgbe_sfp_type_srlr_core0:
+	case ixgbe_sfp_type_srlr_core1:
+	case ixgbe_sfp_type_da_act_lmt_core0:
+	case ixgbe_sfp_type_da_act_lmt_core1:
+	case ixgbe_sfp_type_1g_sx_core0:
+	case ixgbe_sfp_type_1g_sx_core1:
+	case ixgbe_sfp_type_1g_lx_core0:
+	case ixgbe_sfp_type_1g_lx_core1:
+		*linear = false;
+		break;
+	case ixgbe_sfp_type_unknown:
+	case ixgbe_sfp_type_1g_cu_core0:
+	case ixgbe_sfp_type_1g_cu_core1:
+	default:
+		return IXGBE_ERR_SFP_NOT_SUPPORTED;
+	}
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_identify_sfp_module_X550em - Identifies SFP modules
+ *  @hw: pointer to hardware structure
+ *
+ *  Searches for and identifies the SFP module and assigns appropriate PHY type.
+ **/
+s32 ixgbe_identify_sfp_module_X550em(struct ixgbe_hw *hw)
+{
+	s32 status;
+	bool linear;
+
+	DEBUGFUNC("ixgbe_identify_sfp_module_X550em");
+
+	status = ixgbe_identify_module_generic(hw);
+
+	if (status != IXGBE_SUCCESS)
+		return status;
+
+	/* Check if SFP module is supported */
+	status = ixgbe_supported_sfp_modules_X550em(hw, &linear);
+
+	return status;
+}
+
+/**
+ *  ixgbe_setup_sfp_modules_X550em - Setup MAC link ops
+ *  @hw: pointer to hardware structure
+ */
+s32 ixgbe_setup_sfp_modules_X550em(struct ixgbe_hw *hw)
+{
+	s32 status;
+	bool linear;
+
+	DEBUGFUNC("ixgbe_setup_sfp_modules_X550em");
+
+	/* Check if SFP module is supported */
+	status = ixgbe_supported_sfp_modules_X550em(hw, &linear);
+
+	if (status != IXGBE_SUCCESS)
+		return status;
+
+	ixgbe_init_mac_link_ops_X550em(hw);
+	hw->phy.ops.reset = NULL;
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_init_mac_link_ops_X550em - init mac link function pointers
+ *  @hw: pointer to hardware structure
+ */
+void ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw *hw)
+{
+	struct ixgbe_mac_info *mac = &hw->mac;
+
+	DEBUGFUNC("ixgbe_init_mac_link_ops_X550em");
+
+	 switch (hw->mac.ops.get_media_type(hw)) {
+	 case ixgbe_media_type_fiber:
+		/* CS4227 does not support autoneg, so disable the laser control
+		 * functions for SFP+ fiber
+		 */
+		mac->ops.disable_tx_laser = NULL;
+		mac->ops.enable_tx_laser = NULL;
+		mac->ops.flap_tx_laser = NULL;
+		mac->ops.setup_link = ixgbe_setup_mac_link_multispeed_fiber;
+		mac->ops.setup_mac_link = ixgbe_setup_mac_link_sfp_x550em;
+		mac->ops.set_rate_select_speed =
+					ixgbe_set_soft_rate_select_speed;
+		break;
+	case ixgbe_media_type_copper:
+		mac->ops.setup_link = ixgbe_setup_mac_link_t_X550em;
+		mac->ops.check_link = ixgbe_check_link_t_X550em;
+		break;
+	default:
+		break;
+	 }
+}
+
+/**
+ *  ixgbe_get_link_capabilities_x550em - Determines link capabilities
+ *  @hw: pointer to hardware structure
+ *  @speed: pointer to link speed
+ *  @autoneg: true when autoneg or autotry is enabled
+ */
+s32 ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw,
+				       ixgbe_link_speed *speed,
+				       bool *autoneg)
+{
+	DEBUGFUNC("ixgbe_get_link_capabilities_X550em");
+
+	/* SFP */
+	if (hw->phy.media_type == ixgbe_media_type_fiber) {
+
+		/* CS4227 SFP must not enable auto-negotiation */
+		*autoneg = false;
+
+		/* Check if 1G SFP module. */
+		if (hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
+		    hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1
+		    || hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
+		    hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1) {
+			*speed = IXGBE_LINK_SPEED_1GB_FULL;
+			return IXGBE_SUCCESS;
+		}
+
+		/* Link capabilities are based on SFP */
+		if (hw->phy.multispeed_fiber)
+			*speed = IXGBE_LINK_SPEED_10GB_FULL |
+				 IXGBE_LINK_SPEED_1GB_FULL;
+		else
+			*speed = IXGBE_LINK_SPEED_10GB_FULL;
+	} else {
+		*speed = IXGBE_LINK_SPEED_10GB_FULL |
+			 IXGBE_LINK_SPEED_1GB_FULL;
+		*autoneg = true;
+	}
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_get_lasi_ext_t_x550em - Determime external Base T PHY interrupt cause
+ * @hw: pointer to hardware structure
+ * @lsc: pointer to boolean flag which indicates whether external Base T
+ *       PHY interrupt is lsc
+ *
+ * Determime if external Base T PHY interrupt cause is high temperature
+ * failure alarm or link status change.
+ *
+ * Return IXGBE_ERR_OVERTEMP if interrupt is high temperature
+ * failure alarm, else return PHY access status.
+ */
+STATIC s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc)
+{
+	u32 status;
+	u16 reg;
+
+	*lsc = false;
+
+	/* Vendor alarm triggered */
+	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_CHIP_STD_INT_FLAG,
+				      IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+				      &reg);
+
+	if (status != IXGBE_SUCCESS ||
+	    !(reg & IXGBE_MDIO_GLOBAL_VEN_ALM_INT_EN))
+		return status;
+
+	/* Vendor Auto-Neg alarm triggered or Global alarm 1 triggered */
+	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_FLAG,
+				      IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+				      &reg);
+
+	if (status != IXGBE_SUCCESS ||
+	    !(reg & (IXGBE_MDIO_GLOBAL_AN_VEN_ALM_INT_EN |
+	    IXGBE_MDIO_GLOBAL_ALARM_1_INT)))
+		return status;
+
+	/* Global alarm triggered */
+	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_ALARM_1,
+				      IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+				      &reg);
+
+	if (status != IXGBE_SUCCESS)
+		return status;
+
+	/* If high temperature failure, then return over temp error and exit */
+	if (reg & IXGBE_MDIO_GLOBAL_ALM_1_HI_TMP_FAIL) {
+		/* power down the PHY in case the PHY FW didn't already */
+		ixgbe_set_copper_phy_power(hw, false);
+		return IXGBE_ERR_OVERTEMP;
+	} else if (reg & IXGBE_MDIO_GLOBAL_ALM_1_DEV_FAULT) {
+		/*  device fault alarm triggered */
+		status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_FAULT_MSG,
+					  IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+					  &reg);
+
+		if (status != IXGBE_SUCCESS)
+			return status;
+
+		/* if device fault was due to high temp alarm handle and exit */
+		if (reg == IXGBE_MDIO_GLOBAL_FAULT_MSG_HI_TMP) {
+			/* power down the PHY in case the PHY FW didn't */
+			ixgbe_set_copper_phy_power(hw, false);
+			return IXGBE_ERR_OVERTEMP;
+		}
+	}
+
+	/* Vendor alarm 2 triggered */
+	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_CHIP_STD_INT_FLAG,
+				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &reg);
+
+	if (status != IXGBE_SUCCESS ||
+	    !(reg & IXGBE_MDIO_GLOBAL_STD_ALM2_INT))
+		return status;
+
+	/* link connect/disconnect event occurred */
+	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM2,
+				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &reg);
+
+	if (status != IXGBE_SUCCESS)
+		return status;
+
+	/* Indicate LSC */
+	if (reg & IXGBE_MDIO_AUTO_NEG_VEN_LSC)
+		*lsc = true;
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_enable_lasi_ext_t_x550em - Enable external Base T PHY interrupts
+ * @hw: pointer to hardware structure
+ *
+ * Enable link status change and temperature failure alarm for the external
+ * Base T PHY
+ *
+ * Returns PHY access status
+ */
+STATIC s32 ixgbe_enable_lasi_ext_t_x550em(struct ixgbe_hw *hw)
+{
+	u32 status;
+	u16 reg;
+	bool lsc;
+
+	/* Clear interrupt flags */
+	status = ixgbe_get_lasi_ext_t_x550em(hw, &lsc);
+
+	/* Enable link status change alarm */
+	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK,
+				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &reg);
+
+	if (status != IXGBE_SUCCESS)
+		return status;
+
+	reg |= IXGBE_MDIO_PMA_TX_VEN_LASI_INT_EN;
+
+	status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK,
+				       IXGBE_MDIO_AUTO_NEG_DEV_TYPE, reg);
+
+	if (status != IXGBE_SUCCESS)
+		return status;
+
+	/* Enable high temperature failure and global fault alarms */
+	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_MASK,
+				      IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+				      &reg);
+
+	if (status != IXGBE_SUCCESS)
+		return status;
+
+	reg |= (IXGBE_MDIO_GLOBAL_INT_HI_TEMP_EN |
+		IXGBE_MDIO_GLOBAL_INT_DEV_FAULT_EN);
+
+	status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_MASK,
+				       IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+				       reg);
+
+	if (status != IXGBE_SUCCESS)
+		return status;
+
+	/* Enable vendor Auto-Neg alarm and Global Interrupt Mask 1 alarm */
+	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_MASK,
+				      IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+				      &reg);
+
+	if (status != IXGBE_SUCCESS)
+		return status;
+
+	reg |= (IXGBE_MDIO_GLOBAL_AN_VEN_ALM_INT_EN |
+		IXGBE_MDIO_GLOBAL_ALARM_1_INT);
+
+	status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_MASK,
+				       IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+				       reg);
+
+	if (status != IXGBE_SUCCESS)
+		return status;
+
+	/* Enable chip-wide vendor alarm */
+	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_STD_MASK,
+				      IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+				      &reg);
+
+	if (status != IXGBE_SUCCESS)
+		return status;
+
+	reg |= IXGBE_MDIO_GLOBAL_VEN_ALM_INT_EN;
+
+	status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_STD_MASK,
+				       IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+				       reg);
+
+	return status;
+}
+
+/**
+ *  ixgbe_setup_kr_speed_x550em - Configure the KR PHY for link speed.
+ *  @hw: pointer to hardware structure
+ *  @speed: link speed
+ *
+ *  Configures the integrated KR PHY.
+ **/
+STATIC s32 ixgbe_setup_kr_speed_x550em(struct ixgbe_hw *hw,
+				       ixgbe_link_speed speed)
+{
+	s32 status;
+	u32 reg_val;
+
+	status = ixgbe_read_iosf_sb_reg_x550(hw,
+		IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+		IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
+	if (status)
+		return status;
+
+	reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE;
+	reg_val &= ~(IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR |
+		     IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX);
+
+	/* Advertise 10G support. */
+	if (speed & IXGBE_LINK_SPEED_10GB_FULL)
+		reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR;
+
+	/* Advertise 1G support. */
+	if (speed & IXGBE_LINK_SPEED_1GB_FULL)
+		reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX;
+
+	/* Restart auto-negotiation. */
+	reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART;
+	status = ixgbe_write_iosf_sb_reg_x550(hw,
+		IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+		IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+
+	return status;
+}
+
+/**
+ *  ixgbe_init_phy_ops_X550em - PHY/SFP specific init
+ *  @hw: pointer to hardware structure
+ *
+ *  Initialize any function pointers that were not able to be
+ *  set during init_shared_code because the PHY/SFP type was
+ *  not known.  Perform the SFP init if necessary.
+ */
+s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw)
+{
+	struct ixgbe_phy_info *phy = &hw->phy;
+	s32 ret_val;
+
+	DEBUGFUNC("ixgbe_init_phy_ops_X550em");
+
+	hw->mac.ops.set_lan_id(hw);
+
+	if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) {
+		phy->phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM;
+		ixgbe_setup_mux_ctl(hw);
+
+		/* Save NW management interface connected on board. This is used
+		 * to determine internal PHY mode.
+		 */
+		phy->nw_mng_if_sel = IXGBE_READ_REG(hw, IXGBE_NW_MNG_IF_SEL);
+		phy->ops.identify_sfp = ixgbe_identify_sfp_module_X550em;
+	}
+
+	/* Identify the PHY or SFP module */
+	ret_val = phy->ops.identify(hw);
+	if (ret_val == IXGBE_ERR_SFP_NOT_SUPPORTED)
+		return ret_val;
+
+	/* Setup function pointers based on detected hardware */
+	ixgbe_init_mac_link_ops_X550em(hw);
+	if (phy->sfp_type != ixgbe_sfp_type_unknown)
+		phy->ops.reset = NULL;
+
+	/* Set functions pointers based on phy type */
+	switch (hw->phy.type) {
+	case ixgbe_phy_x550em_kx4:
+		phy->ops.setup_link = NULL;
+		phy->ops.read_reg = ixgbe_read_phy_reg_x550em;
+		phy->ops.write_reg = ixgbe_write_phy_reg_x550em;
+		break;
+	case ixgbe_phy_x550em_kr:
+		phy->ops.setup_link = ixgbe_setup_kr_x550em;
+		phy->ops.read_reg = ixgbe_read_phy_reg_x550em;
+		phy->ops.write_reg = ixgbe_write_phy_reg_x550em;
+		break;
+	case ixgbe_phy_x550em_ext_t:
+		/* Save NW management interface connected on board. This is used
+		 * to determine internal PHY mode
+		 */
+		phy->nw_mng_if_sel = IXGBE_READ_REG(hw, IXGBE_NW_MNG_IF_SEL);
+
+		/* If internal link mode is XFI, then setup iXFI internal link,
+		 * else setup KR now.
+		 */
+		phy->ops.setup_internal_link =
+					      ixgbe_setup_internal_phy_t_x550em;
+
+		/* setup SW LPLU only for first revision of X550EM_x */
+		if ((hw->mac.type == ixgbe_mac_X550EM_x) &&
+		    !(IXGBE_FUSES0_REV_MASK &
+		      IXGBE_READ_REG(hw, IXGBE_FUSES0_GROUP(0))))
+			phy->ops.enter_lplu = ixgbe_enter_lplu_t_x550em;
+
+		phy->ops.handle_lasi = ixgbe_handle_lasi_ext_t_x550em;
+		phy->ops.reset = ixgbe_reset_phy_t_X550em;
+		break;
+	default:
+		break;
+	}
+	return ret_val;
+}
+
+/**
+ * ixgbe_set_mdio_speed - Set MDIO clock speed
+ *  @hw: pointer to hardware structure
+ */
+static void ixgbe_set_mdio_speed(struct ixgbe_hw *hw)
+{
+	u32 hlreg0;
+
+	switch (hw->device_id) {
+	case IXGBE_DEV_ID_X550EM_X_10G_T:
+	case IXGBE_DEV_ID_X550EM_A_1G_T:
+	case IXGBE_DEV_ID_X550EM_A_1G_T_L:
+	case IXGBE_DEV_ID_X550EM_A_10G_T:
+	case IXGBE_DEV_ID_X550EM_A_SFP:
+	case IXGBE_DEV_ID_X550EM_A_QSFP:
+		/* Config MDIO clock speed before the first MDIO PHY access */
+		hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0);
+		hlreg0 &= ~IXGBE_HLREG0_MDCSPD;
+		IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0);
+		break;
+	default:
+		break;
+	}
+}
+
+/**
+ *  ixgbe_reset_hw_X550em - Perform hardware reset
+ *  @hw: pointer to hardware structure
+ *
+ *  Resets the hardware by resetting the transmit and receive units, masks
+ *  and clears all interrupts, perform a PHY reset, and perform a link (MAC)
+ *  reset.
+ */
+s32 ixgbe_reset_hw_X550em(struct ixgbe_hw *hw)
+{
+	ixgbe_link_speed link_speed;
+	s32 status;
+	u32 ctrl = 0;
+	u32 i;
+	bool link_up = false;
+
+	DEBUGFUNC("ixgbe_reset_hw_X550em");
+
+	/* Call adapter stop to disable Tx/Rx and clear interrupts */
+	status = hw->mac.ops.stop_adapter(hw);
+	if (status != IXGBE_SUCCESS)
+		return status;
+
+	/* flush pending Tx transactions */
+	ixgbe_clear_tx_pending(hw);
+
+	ixgbe_set_mdio_speed(hw);
+
+	/* PHY ops must be identified and initialized prior to reset */
+	status = hw->phy.ops.init(hw);
+
+	if (status == IXGBE_ERR_SFP_NOT_SUPPORTED)
+		return status;
+
+	/* start the external PHY */
+	if (hw->phy.type == ixgbe_phy_x550em_ext_t) {
+		status = ixgbe_init_ext_t_x550em(hw);
+		if (status)
+			return status;
+	}
+
+	/* Setup SFP module if there is one present. */
+	if (hw->phy.sfp_setup_needed) {
+		status = hw->mac.ops.setup_sfp(hw);
+		hw->phy.sfp_setup_needed = false;
+	}
+
+	if (status == IXGBE_ERR_SFP_NOT_SUPPORTED)
+		return status;
+
+	/* Reset PHY */
+	if (!hw->phy.reset_disable && hw->phy.ops.reset)
+		hw->phy.ops.reset(hw);
+
+mac_reset_top:
+	/* Issue global reset to the MAC.  Needs to be SW reset if link is up.
+	 * If link reset is used when link is up, it might reset the PHY when
+	 * mng is using it.  If link is down or the flag to force full link
+	 * reset is set, then perform link reset.
+	 */
+	ctrl = IXGBE_CTRL_LNK_RST;
+	if (!hw->force_full_reset) {
+		hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
+		if (link_up)
+			ctrl = IXGBE_CTRL_RST;
+	}
+
+	ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL);
+	IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl);
+	IXGBE_WRITE_FLUSH(hw);
+
+	/* Poll for reset bit to self-clear meaning reset is complete */
+	for (i = 0; i < 10; i++) {
+		usec_delay(1);
+		ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
+		if (!(ctrl & IXGBE_CTRL_RST_MASK))
+			break;
+	}
+
+	if (ctrl & IXGBE_CTRL_RST_MASK) {
+		status = IXGBE_ERR_RESET_FAILED;
+		DEBUGOUT("Reset polling failed to complete.\n");
+	}
+
+	msec_delay(50);
+
+	/* Double resets are required for recovery from certain error
+	 * conditions.  Between resets, it is necessary to stall to
+	 * allow time for any pending HW events to complete.
+	 */
+	if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) {
+		hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
+		goto mac_reset_top;
+	}
+
+	/* Store the permanent mac address */
+	hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
+
+	/* Store MAC address from RAR0, clear receive address registers, and
+	 * clear the multicast table.  Also reset num_rar_entries to 128,
+	 * since we modify this value when programming the SAN MAC address.
+	 */
+	hw->mac.num_rar_entries = 128;
+	hw->mac.ops.init_rx_addrs(hw);
+
+	ixgbe_set_mdio_speed(hw);
+
+	if (hw->device_id == IXGBE_DEV_ID_X550EM_X_SFP)
+		ixgbe_setup_mux_ctl(hw);
+
+	return status;
+}
+
+/**
+ * ixgbe_init_ext_t_x550em - Start (unstall) the external Base T PHY.
+ * @hw: pointer to hardware structure
+ */
+s32 ixgbe_init_ext_t_x550em(struct ixgbe_hw *hw)
+{
+	u32 status;
+	u16 reg;
+
+	status = hw->phy.ops.read_reg(hw,
+				      IXGBE_MDIO_TX_VENDOR_ALARMS_3,
+				      IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+				      &reg);
+
+	if (status != IXGBE_SUCCESS)
+		return status;
+
+	/* If PHY FW reset completed bit is set then this is the first
+	 * SW instance after a power on so the PHY FW must be un-stalled.
+	 */
+	if (reg & IXGBE_MDIO_TX_VENDOR_ALARMS_3_RST_MASK) {
+		status = hw->phy.ops.read_reg(hw,
+					IXGBE_MDIO_GLOBAL_RES_PR_10,
+					IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+					&reg);
+
+		if (status != IXGBE_SUCCESS)
+			return status;
+
+		reg &= ~IXGBE_MDIO_POWER_UP_STALL;
+
+		status = hw->phy.ops.write_reg(hw,
+					IXGBE_MDIO_GLOBAL_RES_PR_10,
+					IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+					reg);
+
+		if (status != IXGBE_SUCCESS)
+			return status;
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_setup_kr_x550em - Configure the KR PHY.
+ *  @hw: pointer to hardware structure
+ *
+ *  Configures the integrated KR PHY.
+ **/
+s32 ixgbe_setup_kr_x550em(struct ixgbe_hw *hw)
+{
+	return ixgbe_setup_kr_speed_x550em(hw, hw->phy.autoneg_advertised);
+}
+
+/**
+ *  ixgbe_setup_mac_link_sfp_x550em - Setup internal/external the PHY for SFP
+ *  @hw: pointer to hardware structure
+ *
+ *  Configure the external PHY and the integrated KR PHY for SFP support.
+ **/
+s32 ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw,
+				    ixgbe_link_speed speed,
+				    bool autoneg_wait_to_complete)
+{
+	s32 ret_val;
+	u16 reg_slice, reg_val;
+	bool setup_linear = false;
+	UNREFERENCED_1PARAMETER(autoneg_wait_to_complete);
+
+	/* Check if SFP module is supported and linear */
+	ret_val = ixgbe_supported_sfp_modules_X550em(hw, &setup_linear);
+
+	/* If no SFP module present, then return success. Return success since
+	 * there is no reason to configure CS4227 and SFP not present error is
+	 * not excepted in the setup MAC link flow.
+	 */
+	if (ret_val == IXGBE_ERR_SFP_NOT_PRESENT)
+		return IXGBE_SUCCESS;
+
+	if (ret_val != IXGBE_SUCCESS)
+		return ret_val;
+
+	if (!(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) {
+		/* Configure CS4227 LINE side to 10G SR. */
+		reg_slice = IXGBE_CS4227_LINE_SPARE22_MSB +
+			    (hw->bus.lan_id << 12);
+		reg_val = IXGBE_CS4227_SPEED_10G;
+		ret_val = hw->link.ops.write_link(hw, hw->link.addr, reg_slice,
+						  reg_val);
+
+		reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB +
+			    (hw->bus.lan_id << 12);
+		reg_val = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1;
+		ret_val = hw->link.ops.write_link(hw, hw->link.addr, reg_slice,
+						  reg_val);
+
+		/* Configure CS4227 for HOST connection rate then type. */
+		reg_slice = IXGBE_CS4227_HOST_SPARE22_MSB +
+			    (hw->bus.lan_id << 12);
+		reg_val = (speed & IXGBE_LINK_SPEED_10GB_FULL) ?
+		IXGBE_CS4227_SPEED_10G : IXGBE_CS4227_SPEED_1G;
+		ret_val = hw->link.ops.write_link(hw, hw->link.addr, reg_slice,
+						  reg_val);
+
+		reg_slice = IXGBE_CS4227_HOST_SPARE24_LSB +
+			    (hw->bus.lan_id << 12);
+		if (setup_linear)
+			reg_val = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1;
+		else
+			reg_val = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1;
+		ret_val = hw->link.ops.write_link(hw, hw->link.addr, reg_slice,
+						  reg_val);
+
+		/* Setup XFI internal link. */
+		ret_val = ixgbe_setup_ixfi_x550em(hw, &speed);
+	} else {
+		/* Configure internal PHY for KR/KX. */
+		ixgbe_setup_kr_speed_x550em(hw, speed);
+
+		/* Configure CS4227 LINE side to proper mode. */
+		reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB +
+			    (hw->bus.lan_id << 12);
+		if (setup_linear)
+			reg_val = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1;
+		else
+			reg_val = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1;
+		ret_val = hw->link.ops.write_link(hw, hw->link.addr, reg_slice,
+						  reg_val);
+	}
+	return ret_val;
+}
+
+/**
+ *  ixgbe_setup_ixfi_x550em_x - MAC specific iXFI configuration
+ *  @hw: pointer to hardware structure
+ *
+ *  iXfI configuration needed for ixgbe_mac_X550EM_x devices.
+ **/
+STATIC s32 ixgbe_setup_ixfi_x550em_x(struct ixgbe_hw *hw)
+{
+	s32 status;
+	u32 reg_val;
+
+	/* Disable training protocol FSM. */
+	status = ixgbe_read_iosf_sb_reg_x550(hw,
+				IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
+	if (status != IXGBE_SUCCESS)
+		return status;
+	reg_val |= IXGBE_KRM_RX_TRN_LINKUP_CTRL_CONV_WO_PROTOCOL;
+	status = ixgbe_write_iosf_sb_reg_x550(hw,
+				IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+	if (status != IXGBE_SUCCESS)
+		return status;
+
+	/* Disable Flex from training TXFFE. */
+	status = ixgbe_read_iosf_sb_reg_x550(hw,
+				IXGBE_KRM_DSP_TXFFE_STATE_4(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
+	if (status != IXGBE_SUCCESS)
+		return status;
+	reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_C0_EN;
+	reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN;
+	reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN;
+	status = ixgbe_write_iosf_sb_reg_x550(hw,
+				IXGBE_KRM_DSP_TXFFE_STATE_4(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+	if (status != IXGBE_SUCCESS)
+		return status;
+	status = ixgbe_read_iosf_sb_reg_x550(hw,
+				IXGBE_KRM_DSP_TXFFE_STATE_5(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
+	if (status != IXGBE_SUCCESS)
+		return status;
+	reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_C0_EN;
+	reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN;
+	reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN;
+	status = ixgbe_write_iosf_sb_reg_x550(hw,
+				IXGBE_KRM_DSP_TXFFE_STATE_5(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+	if (status != IXGBE_SUCCESS)
+		return status;
+
+	/* Enable override for coefficients. */
+	status = ixgbe_read_iosf_sb_reg_x550(hw,
+				IXGBE_KRM_TX_COEFF_CTRL_1(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
+	if (status != IXGBE_SUCCESS)
+		return status;
+	reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_OVRRD_EN;
+	reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CZERO_EN;
+	reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CPLUS1_OVRRD_EN;
+	reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CMINUS1_OVRRD_EN;
+	status = ixgbe_write_iosf_sb_reg_x550(hw,
+				IXGBE_KRM_TX_COEFF_CTRL_1(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+	return status;
+}
+
+/**
+ *  ixgbe_setup_ixfi_x550em - Configure the KR PHY for iXFI mode.
+ *  @hw: pointer to hardware structure
+ *  @speed: the link speed to force
+ *
+ *  Configures the integrated KR PHY to use iXFI mode. Used to connect an
+ *  internal and external PHY at a specific speed, without autonegotiation.
+ **/
+STATIC s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed)
+{
+	s32 status;
+	u32 reg_val;
+
+	/* Disable AN and force speed to 10G Serial. */
+	status = ixgbe_read_iosf_sb_reg_x550(hw,
+					IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+					IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
+	if (status != IXGBE_SUCCESS)
+		return status;
+
+	reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE;
+	reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK;
+
+	/* Select forced link speed for internal PHY. */
+	switch (*speed) {
+	case IXGBE_LINK_SPEED_10GB_FULL:
+		reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_10G;
+		break;
+	case IXGBE_LINK_SPEED_1GB_FULL:
+		reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G;
+		break;
+	default:
+		/* Other link speeds are not supported by internal KR PHY. */
+		return IXGBE_ERR_LINK_SETUP;
+	}
+
+	status = ixgbe_write_iosf_sb_reg_x550(hw,
+					IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+					IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+	if (status != IXGBE_SUCCESS)
+		return status;
+
+	/* Additional configuration needed for x550em_x */
+	if (hw->mac.type == ixgbe_mac_X550EM_x) {
+		status = ixgbe_setup_ixfi_x550em_x(hw);
+		if (status != IXGBE_SUCCESS)
+			return status;
+	}
+
+	/* Toggle port SW reset by AN reset. */
+	status = ixgbe_read_iosf_sb_reg_x550(hw,
+					IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+					IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
+	if (status != IXGBE_SUCCESS)
+		return status;
+	reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART;
+	status = ixgbe_write_iosf_sb_reg_x550(hw,
+					IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+					IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+
+	return status;
+}
+
+/**
+ * ixgbe_ext_phy_t_x550em_get_link - Get ext phy link status
+ * @hw: address of hardware structure
+ * @link_up: address of boolean to indicate link status
+ *
+ * Returns error code if unable to get link status.
+ */
+STATIC s32 ixgbe_ext_phy_t_x550em_get_link(struct ixgbe_hw *hw, bool *link_up)
+{
+	u32 ret;
+	u16 autoneg_status;
+
+	*link_up = false;
+
+	/* read this twice back to back to indicate current status */
+	ret = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
+				   IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+				   &autoneg_status);
+	if (ret != IXGBE_SUCCESS)
+		return ret;
+
+	ret = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
+				   IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+				   &autoneg_status);
+	if (ret != IXGBE_SUCCESS)
+		return ret;
+
+	*link_up = !!(autoneg_status & IXGBE_MDIO_AUTO_NEG_LINK_STATUS);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_setup_internal_phy_t_x550em - Configure KR PHY to X557 link
+ * @hw: point to hardware structure
+ *
+ * Configures the link between the integrated KR PHY and the external X557 PHY
+ * The driver will call this function when it gets a link status change
+ * interrupt from the X557 PHY. This function configures the link speed
+ * between the PHYs to match the link speed of the BASE-T link.
+ *
+ * A return of a non-zero value indicates an error, and the base driver should
+ * not report link up.
+ */
+s32 ixgbe_setup_internal_phy_t_x550em(struct ixgbe_hw *hw)
+{
+	ixgbe_link_speed force_speed;
+	bool link_up;
+	u32 status;
+	u16 speed;
+
+	if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper)
+		return IXGBE_ERR_CONFIG;
+
+	if (!(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) {
+		/* If link is down, there is no setup necessary so return  */
+		status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up);
+		if (status != IXGBE_SUCCESS)
+			return status;
+
+		if (!link_up)
+			return IXGBE_SUCCESS;
+
+		status = hw->phy.ops.read_reg(hw,
+					      IXGBE_MDIO_AUTO_NEG_VENDOR_STAT,
+					      IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+					      &speed);
+		if (status != IXGBE_SUCCESS)
+			return status;
+
+		/* If link is still down - no setup is required so return */
+		status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up);
+		if (status != IXGBE_SUCCESS)
+			return status;
+		if (!link_up)
+			return IXGBE_SUCCESS;
+
+		/* clear everything but the speed and duplex bits */
+		speed &= IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_MASK;
+
+		switch (speed) {
+		case IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB_FULL:
+			force_speed = IXGBE_LINK_SPEED_10GB_FULL;
+			break;
+		case IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB_FULL:
+			force_speed = IXGBE_LINK_SPEED_1GB_FULL;
+			break;
+		default:
+			/* Internal PHY does not support anything else */
+			return IXGBE_ERR_INVALID_LINK_SETTINGS;
+		}
+
+		return ixgbe_setup_ixfi_x550em(hw, &force_speed);
+	} else {
+		speed = IXGBE_LINK_SPEED_10GB_FULL |
+			IXGBE_LINK_SPEED_1GB_FULL;
+		return ixgbe_setup_kr_speed_x550em(hw, speed);
+	}
+}
+
+/**
+ *  ixgbe_setup_phy_loopback_x550em - Configure the KR PHY for loopback.
+ *  @hw: pointer to hardware structure
+ *
+ *  Configures the integrated KR PHY to use internal loopback mode.
+ **/
+s32 ixgbe_setup_phy_loopback_x550em(struct ixgbe_hw *hw)
+{
+	s32 status;
+	u32 reg_val;
+
+	/* Disable AN and force speed to 10G Serial. */
+	status = ixgbe_read_iosf_sb_reg_x550(hw,
+		IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+		IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
+	if (status != IXGBE_SUCCESS)
+		return status;
+	reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE;
+	reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK;
+	reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_10G;
+	status = ixgbe_write_iosf_sb_reg_x550(hw,
+		IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+		IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+	if (status != IXGBE_SUCCESS)
+		return status;
+
+	/* Set near-end loopback clocks. */
+	status = ixgbe_read_iosf_sb_reg_x550(hw,
+		IXGBE_KRM_PORT_CAR_GEN_CTRL(hw->bus.lan_id),
+		IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
+	if (status != IXGBE_SUCCESS)
+		return status;
+	reg_val |= IXGBE_KRM_PORT_CAR_GEN_CTRL_NELB_32B;
+	reg_val |= IXGBE_KRM_PORT_CAR_GEN_CTRL_NELB_KRPCS;
+	status = ixgbe_write_iosf_sb_reg_x550(hw,
+		IXGBE_KRM_PORT_CAR_GEN_CTRL(hw->bus.lan_id),
+		IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+	if (status != IXGBE_SUCCESS)
+		return status;
+
+	/* Set loopback enable. */
+	status = ixgbe_read_iosf_sb_reg_x550(hw,
+		IXGBE_KRM_PMD_DFX_BURNIN(hw->bus.lan_id),
+		IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
+	if (status != IXGBE_SUCCESS)
+		return status;
+	reg_val |= IXGBE_KRM_PMD_DFX_BURNIN_TX_RX_KR_LB_MASK;
+	status = ixgbe_write_iosf_sb_reg_x550(hw,
+		IXGBE_KRM_PMD_DFX_BURNIN(hw->bus.lan_id),
+		IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+	if (status != IXGBE_SUCCESS)
+		return status;
+
+	/* Training bypass. */
+	status = ixgbe_read_iosf_sb_reg_x550(hw,
+		IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id),
+		IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
+	if (status != IXGBE_SUCCESS)
+		return status;
+	reg_val |= IXGBE_KRM_RX_TRN_LINKUP_CTRL_PROTOCOL_BYPASS;
+	status = ixgbe_write_iosf_sb_reg_x550(hw,
+		IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id),
+		IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+
+	return status;
+}
+
+/**
+ *  ixgbe_read_ee_hostif_X550 - Read EEPROM word using a host interface command
+ *  assuming that the semaphore is already obtained.
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to read
+ *  @data: word read from the EEPROM
+ *
+ *  Reads a 16 bit word from the EEPROM using the hostif.
+ **/
+s32 ixgbe_read_ee_hostif_data_X550(struct ixgbe_hw *hw, u16 offset,
+				   u16 *data)
+{
+	s32 status;
+	struct ixgbe_hic_read_shadow_ram buffer;
+
+	DEBUGFUNC("ixgbe_read_ee_hostif_data_X550");
+	buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD;
+	buffer.hdr.req.buf_lenh = 0;
+	buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN;
+	buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM;
+
+	/* convert offset from words to bytes */
+	buffer.address = IXGBE_CPU_TO_BE32(offset * 2);
+	/* one word */
+	buffer.length = IXGBE_CPU_TO_BE16(sizeof(u16));
+
+	status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
+					      sizeof(buffer),
+					      IXGBE_HI_COMMAND_TIMEOUT, false);
+
+	if (status)
+		return status;
+
+	*data = (u16)IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG,
+					  FW_NVM_DATA_OFFSET);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_read_ee_hostif_X550 - Read EEPROM word using a host interface command
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to read
+ *  @data: word read from the EEPROM
+ *
+ *  Reads a 16 bit word from the EEPROM using the hostif.
+ **/
+s32 ixgbe_read_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset,
+			      u16 *data)
+{
+	s32 status = IXGBE_SUCCESS;
+
+	DEBUGFUNC("ixgbe_read_ee_hostif_X550");
+
+	if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) ==
+	    IXGBE_SUCCESS) {
+		status = ixgbe_read_ee_hostif_data_X550(hw, offset, data);
+		hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+	} else {
+		status = IXGBE_ERR_SWFW_SYNC;
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_read_ee_hostif_buffer_X550- Read EEPROM word(s) using hostif
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to read
+ *  @words: number of words
+ *  @data: word(s) read from the EEPROM
+ *
+ *  Reads a 16 bit word(s) from the EEPROM using the hostif.
+ **/
+s32 ixgbe_read_ee_hostif_buffer_X550(struct ixgbe_hw *hw,
+				     u16 offset, u16 words, u16 *data)
+{
+	struct ixgbe_hic_read_shadow_ram buffer;
+	u32 current_word = 0;
+	u16 words_to_read;
+	s32 status;
+	u32 i;
+
+	DEBUGFUNC("ixgbe_read_ee_hostif_buffer_X550");
+
+	/* Take semaphore for the entire operation. */
+	status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+	if (status) {
+		DEBUGOUT("EEPROM read buffer - semaphore failed\n");
+		return status;
+	}
+	while (words) {
+		if (words > FW_MAX_READ_BUFFER_SIZE / 2)
+			words_to_read = FW_MAX_READ_BUFFER_SIZE / 2;
+		else
+			words_to_read = words;
+
+		buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD;
+		buffer.hdr.req.buf_lenh = 0;
+		buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN;
+		buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM;
+
+		/* convert offset from words to bytes */
+		buffer.address = IXGBE_CPU_TO_BE32((offset + current_word) * 2);
+		buffer.length = IXGBE_CPU_TO_BE16(words_to_read * 2);
+
+		status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
+						      sizeof(buffer),
+						      IXGBE_HI_COMMAND_TIMEOUT,
+						      false);
+
+		if (status) {
+			DEBUGOUT("Host interface command failed\n");
+			goto out;
+		}
+
+		for (i = 0; i < words_to_read; i++) {
+			u32 reg = IXGBE_FLEX_MNG + (FW_NVM_DATA_OFFSET << 2) +
+				  2 * i;
+			u32 value = IXGBE_READ_REG(hw, reg);
+
+			data[current_word] = (u16)(value & 0xffff);
+			current_word++;
+			i++;
+			if (i < words_to_read) {
+				value >>= 16;
+				data[current_word] = (u16)(value & 0xffff);
+				current_word++;
+			}
+		}
+		words -= words_to_read;
+	}
+
+out:
+	hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+	return status;
+}
+
+/**
+ *  ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to write
+ *  @data: word write to the EEPROM
+ *
+ *  Write a 16 bit word to the EEPROM using the hostif.
+ **/
+s32 ixgbe_write_ee_hostif_data_X550(struct ixgbe_hw *hw, u16 offset,
+				    u16 data)
+{
+	s32 status;
+	struct ixgbe_hic_write_shadow_ram buffer;
+
+	DEBUGFUNC("ixgbe_write_ee_hostif_data_X550");
+
+	buffer.hdr.req.cmd = FW_WRITE_SHADOW_RAM_CMD;
+	buffer.hdr.req.buf_lenh = 0;
+	buffer.hdr.req.buf_lenl = FW_WRITE_SHADOW_RAM_LEN;
+	buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM;
+
+	 /* one word */
+	buffer.length = IXGBE_CPU_TO_BE16(sizeof(u16));
+	buffer.data = data;
+	buffer.address = IXGBE_CPU_TO_BE32(offset * 2);
+
+	status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
+					      sizeof(buffer),
+					      IXGBE_HI_COMMAND_TIMEOUT, false);
+
+	return status;
+}
+
+/**
+ *  ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to write
+ *  @data: word write to the EEPROM
+ *
+ *  Write a 16 bit word to the EEPROM using the hostif.
+ **/
+s32 ixgbe_write_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset,
+			       u16 data)
+{
+	s32 status = IXGBE_SUCCESS;
+
+	DEBUGFUNC("ixgbe_write_ee_hostif_X550");
+
+	if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) ==
+	    IXGBE_SUCCESS) {
+		status = ixgbe_write_ee_hostif_data_X550(hw, offset, data);
+		hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+	} else {
+		DEBUGOUT("write ee hostif failed to get semaphore");
+		status = IXGBE_ERR_SWFW_SYNC;
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_write_ee_hostif_buffer_X550 - Write EEPROM word(s) using hostif
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to write
+ *  @words: number of words
+ *  @data: word(s) write to the EEPROM
+ *
+ *  Write a 16 bit word(s) to the EEPROM using the hostif.
+ **/
+s32 ixgbe_write_ee_hostif_buffer_X550(struct ixgbe_hw *hw,
+				      u16 offset, u16 words, u16 *data)
+{
+	s32 status = IXGBE_SUCCESS;
+	u32 i = 0;
+
+	DEBUGFUNC("ixgbe_write_ee_hostif_buffer_X550");
+
+	/* Take semaphore for the entire operation. */
+	status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+	if (status != IXGBE_SUCCESS) {
+		DEBUGOUT("EEPROM write buffer - semaphore failed\n");
+		goto out;
+	}
+
+	for (i = 0; i < words; i++) {
+		status = ixgbe_write_ee_hostif_data_X550(hw, offset + i,
+							 data[i]);
+
+		if (status != IXGBE_SUCCESS) {
+			DEBUGOUT("Eeprom buffered write failed\n");
+			break;
+		}
+	}
+
+	hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+out:
+
+	return status;
+}
+
+/**
+ * ixgbe_checksum_ptr_x550 - Checksum one pointer region
+ * @hw: pointer to hardware structure
+ * @ptr: pointer offset in eeprom
+ * @size: size of section pointed by ptr, if 0 first word will be used as size
+ * @csum: address of checksum to update
+ *
+ * Returns error status for any failure
+ */
+STATIC s32 ixgbe_checksum_ptr_x550(struct ixgbe_hw *hw, u16 ptr,
+				   u16 size, u16 *csum, u16 *buffer,
+				   u32 buffer_size)
+{
+	u16 buf[256];
+	s32 status;
+	u16 length, bufsz, i, start;
+	u16 *local_buffer;
+
+	bufsz = sizeof(buf) / sizeof(buf[0]);
+
+	/* Read a chunk at the pointer location */
+	if (!buffer) {
+		status = ixgbe_read_ee_hostif_buffer_X550(hw, ptr, bufsz, buf);
+		if (status) {
+			DEBUGOUT("Failed to read EEPROM image\n");
+			return status;
+		}
+		local_buffer = buf;
+	} else {
+		if (buffer_size < ptr)
+			return  IXGBE_ERR_PARAM;
+		local_buffer = &buffer[ptr];
+	}
+
+	if (size) {
+		start = 0;
+		length = size;
+	} else {
+		start = 1;
+		length = local_buffer[0];
+
+		/* Skip pointer section if length is invalid. */
+		if (length == 0xFFFF || length == 0 ||
+		    (ptr + length) >= hw->eeprom.word_size)
+			return IXGBE_SUCCESS;
+	}
+
+	if (buffer && ((u32)start + (u32)length > buffer_size))
+		return IXGBE_ERR_PARAM;
+
+	for (i = start; length; i++, length--) {
+		if (i == bufsz && !buffer) {
+			ptr += bufsz;
+			i = 0;
+			if (length < bufsz)
+				bufsz = length;
+
+			/* Read a chunk at the pointer location */
+			status = ixgbe_read_ee_hostif_buffer_X550(hw, ptr,
+								  bufsz, buf);
+			if (status) {
+				DEBUGOUT("Failed to read EEPROM image\n");
+				return status;
+			}
+		}
+		*csum += local_buffer[i];
+	}
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_calc_checksum_X550 - Calculates and returns the checksum
+ *  @hw: pointer to hardware structure
+ *  @buffer: pointer to buffer containing calculated checksum
+ *  @buffer_size: size of buffer
+ *
+ *  Returns a negative error code on error, or the 16-bit checksum
+ **/
+s32 ixgbe_calc_checksum_X550(struct ixgbe_hw *hw, u16 *buffer, u32 buffer_size)
+{
+	u16 eeprom_ptrs[IXGBE_EEPROM_LAST_WORD + 1];
+	u16 *local_buffer;
+	s32 status;
+	u16 checksum = 0;
+	u16 pointer, i, size;
+
+	DEBUGFUNC("ixgbe_calc_eeprom_checksum_X550");
+
+	hw->eeprom.ops.init_params(hw);
+
+	if (!buffer) {
+		/* Read pointer area */
+		status = ixgbe_read_ee_hostif_buffer_X550(hw, 0,
+						     IXGBE_EEPROM_LAST_WORD + 1,
+						     eeprom_ptrs);
+		if (status) {
+			DEBUGOUT("Failed to read EEPROM image\n");
+			return status;
+		}
+		local_buffer = eeprom_ptrs;
+	} else {
+		if (buffer_size < IXGBE_EEPROM_LAST_WORD)
+			return IXGBE_ERR_PARAM;
+		local_buffer = buffer;
+	}
+
+	/*
+	 * For X550 hardware include 0x0-0x41 in the checksum, skip the
+	 * checksum word itself
+	 */
+	for (i = 0; i <= IXGBE_EEPROM_LAST_WORD; i++)
+		if (i != IXGBE_EEPROM_CHECKSUM)
+			checksum += local_buffer[i];
+
+	/*
+	 * Include all data from pointers 0x3, 0x6-0xE.  This excludes the
+	 * FW, PHY module, and PCIe Expansion/Option ROM pointers.
+	 */
+	for (i = IXGBE_PCIE_ANALOG_PTR_X550; i < IXGBE_FW_PTR; i++) {
+		if (i == IXGBE_PHY_PTR || i == IXGBE_OPTION_ROM_PTR)
+			continue;
+
+		pointer = local_buffer[i];
+
+		/* Skip pointer section if the pointer is invalid. */
+		if (pointer == 0xFFFF || pointer == 0 ||
+		    pointer >= hw->eeprom.word_size)
+			continue;
+
+		switch (i) {
+		case IXGBE_PCIE_GENERAL_PTR:
+			size = IXGBE_IXGBE_PCIE_GENERAL_SIZE;
+			break;
+		case IXGBE_PCIE_CONFIG0_PTR:
+		case IXGBE_PCIE_CONFIG1_PTR:
+			size = IXGBE_PCIE_CONFIG_SIZE;
+			break;
+		default:
+			size = 0;
+			break;
+		}
+
+		status = ixgbe_checksum_ptr_x550(hw, pointer, size, &checksum,
+						buffer, buffer_size);
+		if (status)
+			return status;
+	}
+
+	checksum = (u16)IXGBE_EEPROM_SUM - checksum;
+
+	return (s32)checksum;
+}
+
+/**
+ *  ixgbe_calc_eeprom_checksum_X550 - Calculates and returns the checksum
+ *  @hw: pointer to hardware structure
+ *
+ *  Returns a negative error code on error, or the 16-bit checksum
+ **/
+s32 ixgbe_calc_eeprom_checksum_X550(struct ixgbe_hw *hw)
+{
+	return ixgbe_calc_checksum_X550(hw, NULL, 0);
+}
+
+/**
+ *  ixgbe_validate_eeprom_checksum_X550 - Validate EEPROM checksum
+ *  @hw: pointer to hardware structure
+ *  @checksum_val: calculated checksum
+ *
+ *  Performs checksum calculation and validates the EEPROM checksum.  If the
+ *  caller does not need checksum_val, the value can be NULL.
+ **/
+s32 ixgbe_validate_eeprom_checksum_X550(struct ixgbe_hw *hw, u16 *checksum_val)
+{
+	s32 status;
+	u16 checksum;
+	u16 read_checksum = 0;
+
+	DEBUGFUNC("ixgbe_validate_eeprom_checksum_X550");
+
+	/* Read the first word from the EEPROM. If this times out or fails, do
+	 * not continue or we could be in for a very long wait while every
+	 * EEPROM read fails
+	 */
+	status = hw->eeprom.ops.read(hw, 0, &checksum);
+	if (status) {
+		DEBUGOUT("EEPROM read failed\n");
+		return status;
+	}
+
+	status = hw->eeprom.ops.calc_checksum(hw);
+	if (status < 0)
+		return status;
+
+	checksum = (u16)(status & 0xffff);
+
+	status = ixgbe_read_ee_hostif_X550(hw, IXGBE_EEPROM_CHECKSUM,
+					   &read_checksum);
+	if (status)
+		return status;
+
+	/* Verify read checksum from EEPROM is the same as
+	 * calculated checksum
+	 */
+	if (read_checksum != checksum) {
+		status = IXGBE_ERR_EEPROM_CHECKSUM;
+		ERROR_REPORT1(IXGBE_ERROR_INVALID_STATE,
+			     "Invalid EEPROM checksum");
+	}
+
+	/* If the user cares, return the calculated checksum */
+	if (checksum_val)
+		*checksum_val = checksum;
+
+	return status;
+}
+
+/**
+ * ixgbe_update_eeprom_checksum_X550 - Updates the EEPROM checksum and flash
+ * @hw: pointer to hardware structure
+ *
+ * After writing EEPROM to shadow RAM using EEWR register, software calculates
+ * checksum and updates the EEPROM and instructs the hardware to update
+ * the flash.
+ **/
+s32 ixgbe_update_eeprom_checksum_X550(struct ixgbe_hw *hw)
+{
+	s32 status;
+	u16 checksum = 0;
+
+	DEBUGFUNC("ixgbe_update_eeprom_checksum_X550");
+
+	/* Read the first word from the EEPROM. If this times out or fails, do
+	 * not continue or we could be in for a very long wait while every
+	 * EEPROM read fails
+	 */
+	status = ixgbe_read_ee_hostif_X550(hw, 0, &checksum);
+	if (status) {
+		DEBUGOUT("EEPROM read failed\n");
+		return status;
+	}
+
+	status = ixgbe_calc_eeprom_checksum_X550(hw);
+	if (status < 0)
+		return status;
+
+	checksum = (u16)(status & 0xffff);
+
+	status = ixgbe_write_ee_hostif_X550(hw, IXGBE_EEPROM_CHECKSUM,
+					    checksum);
+	if (status)
+		return status;
+
+	status = ixgbe_update_flash_X550(hw);
+
+	return status;
+}
+
+/**
+ *  ixgbe_update_flash_X550 - Instruct HW to copy EEPROM to Flash device
+ *  @hw: pointer to hardware structure
+ *
+ *  Issue a shadow RAM dump to FW to copy EEPROM from shadow RAM to the flash.
+ **/
+s32 ixgbe_update_flash_X550(struct ixgbe_hw *hw)
+{
+	s32 status = IXGBE_SUCCESS;
+	union ixgbe_hic_hdr2 buffer;
+
+	DEBUGFUNC("ixgbe_update_flash_X550");
+
+	buffer.req.cmd = FW_SHADOW_RAM_DUMP_CMD;
+	buffer.req.buf_lenh = 0;
+	buffer.req.buf_lenl = FW_SHADOW_RAM_DUMP_LEN;
+	buffer.req.checksum = FW_DEFAULT_CHECKSUM;
+
+	status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
+					      sizeof(buffer),
+					      IXGBE_HI_COMMAND_TIMEOUT, false);
+
+	return status;
+}
+
+/**
+ *  ixgbe_get_supported_physical_layer_X550em - Returns physical layer type
+ *  @hw: pointer to hardware structure
+ *
+ *  Determines physical layer capabilities of the current configuration.
+ **/
+u32 ixgbe_get_supported_physical_layer_X550em(struct ixgbe_hw *hw)
+{
+	u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+	u16 ext_ability = 0;
+
+	DEBUGFUNC("ixgbe_get_supported_physical_layer_X550em");
+
+	hw->phy.ops.identify(hw);
+
+	switch (hw->phy.type) {
+	case ixgbe_phy_x550em_kr:
+		physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KR |
+				 IXGBE_PHYSICAL_LAYER_1000BASE_KX;
+		break;
+	case ixgbe_phy_x550em_kx4:
+		physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4 |
+				 IXGBE_PHYSICAL_LAYER_1000BASE_KX;
+		break;
+	case ixgbe_phy_x550em_ext_t:
+		hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_EXT_ABILITY,
+				     IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+				     &ext_ability);
+		if (ext_ability & IXGBE_MDIO_PHY_10GBASET_ABILITY)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T;
+		if (ext_ability & IXGBE_MDIO_PHY_1000BASET_ABILITY)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T;
+		break;
+	default:
+		break;
+	}
+
+	if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber)
+		physical_layer = ixgbe_get_supported_phy_sfp_layer_generic(hw);
+
+	return physical_layer;
+}
+
+/**
+ * ixgbe_get_bus_info_x550em - Set PCI bus info
+ * @hw: pointer to hardware structure
+ *
+ * Sets bus link width and speed to unknown because X550em is
+ * not a PCI device.
+ **/
+s32 ixgbe_get_bus_info_X550em(struct ixgbe_hw *hw)
+{
+
+	DEBUGFUNC("ixgbe_get_bus_info_x550em");
+
+	hw->bus.width = ixgbe_bus_width_unknown;
+	hw->bus.speed = ixgbe_bus_speed_unknown;
+
+	hw->mac.ops.set_lan_id(hw);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_disable_rx_x550 - Disable RX unit
+ *
+ * Enables the Rx DMA unit for x550
+ **/
+void ixgbe_disable_rx_x550(struct ixgbe_hw *hw)
+{
+	u32 rxctrl, pfdtxgswc;
+	s32 status;
+	struct ixgbe_hic_disable_rxen fw_cmd;
+
+	DEBUGFUNC("ixgbe_enable_rx_dma_x550");
+
+	rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
+	if (rxctrl & IXGBE_RXCTRL_RXEN) {
+		pfdtxgswc = IXGBE_READ_REG(hw, IXGBE_PFDTXGSWC);
+		if (pfdtxgswc & IXGBE_PFDTXGSWC_VT_LBEN) {
+			pfdtxgswc &= ~IXGBE_PFDTXGSWC_VT_LBEN;
+			IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, pfdtxgswc);
+			hw->mac.set_lben = true;
+		} else {
+			hw->mac.set_lben = false;
+		}
+
+		fw_cmd.hdr.cmd = FW_DISABLE_RXEN_CMD;
+		fw_cmd.hdr.buf_len = FW_DISABLE_RXEN_LEN;
+		fw_cmd.hdr.checksum = FW_DEFAULT_CHECKSUM;
+		fw_cmd.port_number = (u8)hw->bus.lan_id;
+
+		status = ixgbe_host_interface_command(hw, (u32 *)&fw_cmd,
+					sizeof(struct ixgbe_hic_disable_rxen),
+					IXGBE_HI_COMMAND_TIMEOUT, true);
+
+		/* If we fail - disable RX using register write */
+		if (status) {
+			rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
+			if (rxctrl & IXGBE_RXCTRL_RXEN) {
+				rxctrl &= ~IXGBE_RXCTRL_RXEN;
+				IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl);
+			}
+		}
+	}
+}
+
+/**
+ * ixgbe_enter_lplu_x550em - Transition to low power states
+ *  @hw: pointer to hardware structure
+ *
+ * Configures Low Power Link Up on transition to low power states
+ * (from D0 to non-D0). Link is required to enter LPLU so avoid resetting the
+ * X557 PHY immediately prior to entering LPLU.
+ **/
+s32 ixgbe_enter_lplu_t_x550em(struct ixgbe_hw *hw)
+{
+	u16 an_10g_cntl_reg, autoneg_reg, speed;
+	s32 status;
+	ixgbe_link_speed lcd_speed;
+	u32 save_autoneg;
+	bool link_up;
+
+	/* SW LPLU not required on later HW revisions. */
+	if ((hw->mac.type == ixgbe_mac_X550EM_x) &&
+	    (IXGBE_FUSES0_REV_MASK &
+	     IXGBE_READ_REG(hw, IXGBE_FUSES0_GROUP(0))))
+		return IXGBE_SUCCESS;
+
+	/* If blocked by MNG FW, then don't restart AN */
+	if (ixgbe_check_reset_blocked(hw))
+		return IXGBE_SUCCESS;
+
+	status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up);
+	if (status != IXGBE_SUCCESS)
+		return status;
+
+	status = ixgbe_read_eeprom(hw, NVM_INIT_CTRL_3, &hw->eeprom.ctrl_word_3);
+
+	if (status != IXGBE_SUCCESS)
+		return status;
+
+	/* If link is down, LPLU disabled in NVM, WoL disabled, or manageability
+	 * disabled, then force link down by entering low power mode.
+	 */
+	if (!link_up || !(hw->eeprom.ctrl_word_3 & NVM_INIT_CTRL_3_LPLU) ||
+	    !(hw->wol_enabled || ixgbe_mng_present(hw)))
+		return ixgbe_set_copper_phy_power(hw, FALSE);
+
+	/* Determine LCD */
+	status = ixgbe_get_lcd_t_x550em(hw, &lcd_speed);
+
+	if (status != IXGBE_SUCCESS)
+		return status;
+
+	/* If no valid LCD link speed, then force link down and exit. */
+	if (lcd_speed == IXGBE_LINK_SPEED_UNKNOWN)
+		return ixgbe_set_copper_phy_power(hw, FALSE);
+
+	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_STAT,
+				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+				      &speed);
+
+	if (status != IXGBE_SUCCESS)
+		return status;
+
+	/* If no link now, speed is invalid so take link down */
+	status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up);
+	if (status != IXGBE_SUCCESS)
+		return ixgbe_set_copper_phy_power(hw, false);
+
+	/* clear everything but the speed bits */
+	speed &= IXGBE_MDIO_AUTO_NEG_VEN_STAT_SPEED_MASK;
+
+	/* If current speed is already LCD, then exit. */
+	if (((speed == IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB) &&
+	     (lcd_speed == IXGBE_LINK_SPEED_1GB_FULL)) ||
+	    ((speed == IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB) &&
+	     (lcd_speed == IXGBE_LINK_SPEED_10GB_FULL)))
+		return status;
+
+	/* Clear AN completed indication */
+	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM,
+				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+				      &autoneg_reg);
+
+	if (status != IXGBE_SUCCESS)
+		return status;
+
+	status = hw->phy.ops.read_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG,
+			     IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+			     &an_10g_cntl_reg);
+
+	if (status != IXGBE_SUCCESS)
+		return status;
+
+	status = hw->phy.ops.read_reg(hw,
+			     IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
+			     IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+			     &autoneg_reg);
+
+	if (status != IXGBE_SUCCESS)
+		return status;
+
+	save_autoneg = hw->phy.autoneg_advertised;
+
+	/* Setup link at least common link speed */
+	status = hw->mac.ops.setup_link(hw, lcd_speed, false);
+
+	/* restore autoneg from before setting lplu speed */
+	hw->phy.autoneg_advertised = save_autoneg;
+
+	return status;
+}
+
+/**
+ * ixgbe_get_lcd_x550em - Determine lowest common denominator
+ *  @hw: pointer to hardware structure
+ *  @lcd_speed: pointer to lowest common link speed
+ *
+ * Determine lowest common link speed with link partner.
+ **/
+s32 ixgbe_get_lcd_t_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *lcd_speed)
+{
+	u16 an_lp_status;
+	s32 status;
+	u16 word = hw->eeprom.ctrl_word_3;
+
+	*lcd_speed = IXGBE_LINK_SPEED_UNKNOWN;
+
+	status = hw->phy.ops.read_reg(hw, IXGBE_AUTO_NEG_LP_STATUS,
+				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+				      &an_lp_status);
+
+	if (status != IXGBE_SUCCESS)
+		return status;
+
+	/* If link partner advertised 1G, return 1G */
+	if (an_lp_status & IXGBE_AUTO_NEG_LP_1000BASE_CAP) {
+		*lcd_speed = IXGBE_LINK_SPEED_1GB_FULL;
+		return status;
+	}
+
+	/* If 10G disabled for LPLU via NVM D10GMP, then return no valid LCD */
+	if ((hw->bus.lan_id && (word & NVM_INIT_CTRL_3_D10GMP_PORT1)) ||
+	    (word & NVM_INIT_CTRL_3_D10GMP_PORT0))
+		return status;
+
+	/* Link partner not capable of lower speeds, return 10G */
+	*lcd_speed = IXGBE_LINK_SPEED_10GB_FULL;
+	return status;
+}
+
+/**
+ *  ixgbe_setup_fc_X550em - Set up flow control
+ *  @hw: pointer to hardware structure
+ *
+ *  Called at init time to set up flow control.
+ **/
+s32 ixgbe_setup_fc_X550em(struct ixgbe_hw *hw)
+{
+	s32 ret_val = IXGBE_SUCCESS;
+	u32 pause, asm_dir, reg_val;
+
+	DEBUGFUNC("ixgbe_setup_fc_X550em");
+
+	/* Validate the requested mode */
+	if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) {
+		ERROR_REPORT1(IXGBE_ERROR_UNSUPPORTED,
+			"ixgbe_fc_rx_pause not valid in strict IEEE mode\n");
+		ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
+		goto out;
+	}
+
+	/* 10gig parts do not have a word in the EEPROM to determine the
+	 * default flow control setting, so we explicitly set it to full.
+	 */
+	if (hw->fc.requested_mode == ixgbe_fc_default)
+		hw->fc.requested_mode = ixgbe_fc_full;
+
+	/* Determine PAUSE and ASM_DIR bits. */
+	switch (hw->fc.requested_mode) {
+	case ixgbe_fc_none:
+		pause = 0;
+		asm_dir = 0;
+		break;
+	case ixgbe_fc_tx_pause:
+		pause = 0;
+		asm_dir = 1;
+		break;
+	case ixgbe_fc_rx_pause:
+		/* Rx Flow control is enabled and Tx Flow control is
+		 * disabled by software override. Since there really
+		 * isn't a way to advertise that we are capable of RX
+		 * Pause ONLY, we will advertise that we support both
+		 * symmetric and asymmetric Rx PAUSE, as such we fall
+		 * through to the fc_full statement.  Later, we will
+		 * disable the adapter's ability to send PAUSE frames.
+		 */
+	case ixgbe_fc_full:
+		pause = 1;
+		asm_dir = 1;
+		break;
+	default:
+		ERROR_REPORT1(IXGBE_ERROR_ARGUMENT,
+			"Flow control param set incorrectly\n");
+		ret_val = IXGBE_ERR_CONFIG;
+		goto out;
+	}
+
+	if (hw->device_id == IXGBE_DEV_ID_X550EM_X_KR) {
+		ret_val = ixgbe_read_iosf_sb_reg_x550(hw,
+			IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id),
+			IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
+		if (ret_val != IXGBE_SUCCESS)
+			goto out;
+		reg_val &= ~(IXGBE_KRM_AN_CNTL_1_SYM_PAUSE |
+			IXGBE_KRM_AN_CNTL_1_ASM_PAUSE);
+		if (pause)
+			reg_val |= IXGBE_KRM_AN_CNTL_1_SYM_PAUSE;
+		if (asm_dir)
+			reg_val |= IXGBE_KRM_AN_CNTL_1_ASM_PAUSE;
+		ret_val = ixgbe_write_iosf_sb_reg_x550(hw,
+			IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id),
+			IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+
+		/* This device does not fully support AN. */
+		hw->fc.disable_fc_autoneg = true;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ * ixgbe_set_mux - Set mux for port 1 access with CS4227
+ * @hw: pointer to hardware structure
+ * @state: set mux if 1, clear if 0
+ */
+STATIC void ixgbe_set_mux(struct ixgbe_hw *hw, u8 state)
+{
+	u32 esdp;
+
+	if (!hw->bus.lan_id)
+		return;
+	esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+	if (state)
+		esdp |= IXGBE_ESDP_SDP1;
+	else
+		esdp &= ~IXGBE_ESDP_SDP1;
+	IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+	IXGBE_WRITE_FLUSH(hw);
+}
+
+/**
+ *  ixgbe_acquire_swfw_sync_X550em - Acquire SWFW semaphore
+ *  @hw: pointer to hardware structure
+ *  @mask: Mask to specify which semaphore to acquire
+ *
+ *  Acquires the SWFW semaphore and sets the I2C MUX
+ **/
+s32 ixgbe_acquire_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask)
+{
+	s32 status;
+
+	DEBUGFUNC("ixgbe_acquire_swfw_sync_X550em");
+
+	status = ixgbe_acquire_swfw_sync_X540(hw, mask);
+	if (status)
+		return status;
+
+	if (mask & IXGBE_GSSR_I2C_MASK)
+		ixgbe_set_mux(hw, 1);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_release_swfw_sync_X550em - Release SWFW semaphore
+ *  @hw: pointer to hardware structure
+ *  @mask: Mask to specify which semaphore to release
+ *
+ *  Releases the SWFW semaphore and sets the I2C MUX
+ **/
+void ixgbe_release_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask)
+{
+	DEBUGFUNC("ixgbe_release_swfw_sync_X550em");
+
+	if (mask & IXGBE_GSSR_I2C_MASK)
+		ixgbe_set_mux(hw, 0);
+
+	ixgbe_release_swfw_sync_X540(hw, mask);
+}
+
+/**
+ *  ixgbe_acquire_swfw_sync_X550a - Acquire SWFW semaphore
+ *  @hw: pointer to hardware structure
+ *  @mask: Mask to specify which semaphore to acquire
+ *
+ *  Acquires the SWFW semaphore and get the shared phy token as needed
+ */
+static s32 ixgbe_acquire_swfw_sync_X550a(struct ixgbe_hw *hw, u32 mask)
+{
+	u32 hmask = mask & ~IXGBE_GSSR_TOKEN_SM;
+	int retries = FW_PHY_TOKEN_RETRIES;
+	s32 status = IXGBE_SUCCESS;
+
+	DEBUGFUNC("ixgbe_acquire_swfw_sync_X550a");
+
+	while (--retries) {
+		if (hmask)
+			status = ixgbe_acquire_swfw_sync_X540(hw, hmask);
+		if (status)
+			break;
+		if (!(mask & IXGBE_GSSR_TOKEN_SM))
+			break;
+		status = ixgbe_get_phy_token(hw);
+		if (status != IXGBE_ERR_TOKEN_RETRY)
+			break;
+		if (hmask)
+			ixgbe_release_swfw_sync_X540(hw, hmask);
+		msec_delay(FW_PHY_TOKEN_DELAY);
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_release_swfw_sync_X550a - Release SWFW semaphore
+ *  @hw: pointer to hardware structure
+ *  @mask: Mask to specify which semaphore to release
+ *
+ *  Releases the SWFW semaphore and puts the shared phy token as needed
+ */
+static void ixgbe_release_swfw_sync_X550a(struct ixgbe_hw *hw, u32 mask)
+{
+	u32 hmask = mask & ~IXGBE_GSSR_TOKEN_SM;
+
+	DEBUGFUNC("ixgbe_release_swfw_sync_X550a");
+
+	if (mask & IXGBE_GSSR_TOKEN_SM)
+		ixgbe_put_phy_token(hw);
+
+	if (hmask)
+		ixgbe_release_swfw_sync_X540(hw, hmask);
+}
+
+/**
+ * ixgbe_handle_lasi_ext_t_x550em - Handle external Base T PHY interrupt
+ * @hw: pointer to hardware structure
+ *
+ * Handle external Base T PHY interrupt. If high temperature
+ * failure alarm then return error, else if link status change
+ * then setup internal/external PHY link
+ *
+ * Return IXGBE_ERR_OVERTEMP if interrupt is high temperature
+ * failure alarm, else return PHY access status.
+ */
+s32 ixgbe_handle_lasi_ext_t_x550em(struct ixgbe_hw *hw)
+{
+	bool lsc;
+	u32 status;
+
+	status = ixgbe_get_lasi_ext_t_x550em(hw, &lsc);
+
+	if (status != IXGBE_SUCCESS)
+		return status;
+
+	if (lsc)
+		return ixgbe_setup_internal_phy(hw);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_setup_mac_link_t_X550em - Sets the auto advertised link speed
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ * @autoneg_wait_to_complete: true when waiting for completion is needed
+ *
+ * Setup internal/external PHY link speed based on link speed, then set
+ * external PHY auto advertised link speed.
+ *
+ * Returns error status for any failure
+ **/
+s32 ixgbe_setup_mac_link_t_X550em(struct ixgbe_hw *hw,
+				  ixgbe_link_speed speed,
+				  bool autoneg_wait_to_complete)
+{
+	s32 status;
+	ixgbe_link_speed force_speed;
+
+	DEBUGFUNC("ixgbe_setup_mac_link_t_X550em");
+
+	/* Setup internal/external PHY link speed to iXFI (10G), unless
+	 * only 1G is auto advertised then setup KX link.
+	 */
+	if (speed & IXGBE_LINK_SPEED_10GB_FULL)
+		force_speed = IXGBE_LINK_SPEED_10GB_FULL;
+	else
+		force_speed = IXGBE_LINK_SPEED_1GB_FULL;
+
+	/* If internal link mode is XFI, then setup XFI internal link. */
+	if (!(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) {
+		status = ixgbe_setup_ixfi_x550em(hw, &force_speed);
+
+		if (status != IXGBE_SUCCESS)
+			return status;
+	}
+
+	return hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait_to_complete);
+}
+
+/**
+ * ixgbe_check_link_t_X550em - Determine link and speed status
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @link_up: true when link is up
+ * @link_up_wait_to_complete: bool used to wait for link up or not
+ *
+ * Check that both the MAC and X557 external PHY have link.
+ **/
+s32 ixgbe_check_link_t_X550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+			      bool *link_up, bool link_up_wait_to_complete)
+{
+	u32 status;
+	u16 autoneg_status;
+
+	if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper)
+		return IXGBE_ERR_CONFIG;
+
+	status = ixgbe_check_mac_link_generic(hw, speed, link_up,
+					      link_up_wait_to_complete);
+
+	/* If check link fails or MAC link is not up, then return */
+	if (status != IXGBE_SUCCESS || !(*link_up))
+		return status;
+
+	/* MAC link is up, so check external PHY link.
+	 * Read this twice back to back to indicate current status.
+	 */
+	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
+				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+				      &autoneg_status);
+
+	if (status != IXGBE_SUCCESS)
+		return status;
+
+	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
+				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+				      &autoneg_status);
+
+	if (status != IXGBE_SUCCESS)
+		return status;
+
+	/* If external PHY link is not up, then indicate link not up */
+	if (!(autoneg_status & IXGBE_MDIO_AUTO_NEG_LINK_STATUS))
+		*link_up = false;
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_reset_phy_t_X550em - Performs X557 PHY reset and enables LASI
+ *  @hw: pointer to hardware structure
+ **/
+s32 ixgbe_reset_phy_t_X550em(struct ixgbe_hw *hw)
+{
+	s32 status;
+
+	status = ixgbe_reset_phy_generic(hw);
+
+	if (status != IXGBE_SUCCESS)
+		return status;
+
+	/* Configure Link Status Alarm and Temperature Threshold interrupts */
+	return ixgbe_enable_lasi_ext_t_x550em(hw);
+}
+
+/**
+ *  ixgbe_led_on_t_X550em - Turns on the software controllable LEDs.
+ *  @hw: pointer to hardware structure
+ *  @led_idx: led number to turn on
+ **/
+s32 ixgbe_led_on_t_X550em(struct ixgbe_hw *hw, u32 led_idx)
+{
+	u16 phy_data;
+
+	DEBUGFUNC("ixgbe_led_on_t_X550em");
+
+	if (led_idx >= IXGBE_X557_MAX_LED_INDEX)
+		return IXGBE_ERR_PARAM;
+
+	/* To turn on the LED, set mode to ON. */
+	ixgbe_read_phy_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
+			   IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, &phy_data);
+	phy_data |= IXGBE_X557_LED_MANUAL_SET_MASK;
+	ixgbe_write_phy_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
+			    IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, phy_data);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_led_off_t_X550em - Turns off the software controllable LEDs.
+ *  @hw: pointer to hardware structure
+ *  @led_idx: led number to turn off
+ **/
+s32 ixgbe_led_off_t_X550em(struct ixgbe_hw *hw, u32 led_idx)
+{
+	u16 phy_data;
+
+	DEBUGFUNC("ixgbe_led_off_t_X550em");
+
+	if (led_idx >= IXGBE_X557_MAX_LED_INDEX)
+		return IXGBE_ERR_PARAM;
+
+	/* To turn on the LED, set mode to ON. */
+	ixgbe_read_phy_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
+			   IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, &phy_data);
+	phy_data &= ~IXGBE_X557_LED_MANUAL_SET_MASK;
+	ixgbe_write_phy_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
+			    IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, phy_data);
+
+	return IXGBE_SUCCESS;
+}
+
diff --git a/drivers/net/ixgbe/base/ixgbe_x550.h b/drivers/net/ixgbe/base/ixgbe_x550.h
new file mode 100644
index 00000000..a8c0a678
--- /dev/null
+++ b/drivers/net/ixgbe/base/ixgbe_x550.h
@@ -0,0 +1,113 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+    this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in the
+    documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+    contributors may be used to endorse or promote products derived from
+    this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#ifndef _IXGBE_X550_H_
+#define _IXGBE_X550_H_
+
+#include "ixgbe_type.h"
+
+s32 ixgbe_dmac_config_X550(struct ixgbe_hw *hw);
+s32 ixgbe_dmac_config_tcs_X550(struct ixgbe_hw *hw);
+s32 ixgbe_dmac_update_tcs_X550(struct ixgbe_hw *hw);
+
+s32 ixgbe_get_bus_info_X550em(struct ixgbe_hw *hw);
+s32 ixgbe_init_eeprom_params_X550(struct ixgbe_hw *hw);
+s32 ixgbe_update_eeprom_checksum_X550(struct ixgbe_hw *hw);
+s32 ixgbe_calc_eeprom_checksum_X550(struct ixgbe_hw *hw);
+s32 ixgbe_calc_checksum_X550(struct ixgbe_hw *hw, u16 *buffer, u32 buffer_size);
+s32 ixgbe_validate_eeprom_checksum_X550(struct ixgbe_hw *hw, u16 *checksum_val);
+s32 ixgbe_update_flash_X550(struct ixgbe_hw *hw);
+s32 ixgbe_write_ee_hostif_buffer_X550(struct ixgbe_hw *hw,
+				      u16 offset, u16 words, u16 *data);
+s32 ixgbe_write_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset,
+			       u16 data);
+s32 ixgbe_read_ee_hostif_buffer_X550(struct ixgbe_hw *hw,
+				     u16 offset, u16 words, u16 *data);
+s32 ixgbe_read_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset,
+u16				*data);
+s32 ixgbe_read_ee_hostif_data_X550(struct ixgbe_hw *hw, u16 offset,
+				   u16 *data);
+s32 ixgbe_write_ee_hostif_data_X550(struct ixgbe_hw *hw, u16 offset,
+				    u16 data);
+s32 ixgbe_set_eee_X550(struct ixgbe_hw *hw, bool enable_eee);
+s32 ixgbe_setup_eee_X550(struct ixgbe_hw *hw, bool enable_eee);
+void ixgbe_set_source_address_pruning_X550(struct ixgbe_hw *hw, bool enable,
+					   unsigned int pool);
+void ixgbe_set_ethertype_anti_spoofing_X550(struct ixgbe_hw *hw,
+					    bool enable, int vf);
+s32 ixgbe_write_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr,
+				 u32 device_type, u32 data);
+s32 ixgbe_read_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr,
+	u32 device_type, u32 *data);
+s32 ixgbe_get_phy_token(struct ixgbe_hw *);
+s32 ixgbe_put_phy_token(struct ixgbe_hw *);
+s32 ixgbe_write_iosf_sb_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr,
+	u32 device_type, u32 data);
+s32 ixgbe_read_iosf_sb_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr,
+	u32 device_type, u32 *data);
+void ixgbe_disable_mdd_X550(struct ixgbe_hw *hw);
+void ixgbe_enable_mdd_X550(struct ixgbe_hw *hw);
+void ixgbe_mdd_event_X550(struct ixgbe_hw *hw, u32 *vf_bitmap);
+void ixgbe_restore_mdd_vf_X550(struct ixgbe_hw *hw, u32 vf);
+enum ixgbe_media_type ixgbe_get_media_type_X550em(struct ixgbe_hw *hw);
+s32 ixgbe_setup_sfp_modules_X550em(struct ixgbe_hw *hw);
+s32 ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw,
+				       ixgbe_link_speed *speed, bool *autoneg);
+void ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw *hw);
+s32 ixgbe_reset_hw_X550em(struct ixgbe_hw *hw);
+s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw);
+s32 ixgbe_setup_kr_x550em(struct ixgbe_hw *hw);
+s32 ixgbe_init_ext_t_x550em(struct ixgbe_hw *hw);
+s32 ixgbe_setup_internal_phy_t_x550em(struct ixgbe_hw *hw);
+s32 ixgbe_setup_phy_loopback_x550em(struct ixgbe_hw *hw);
+u32 ixgbe_get_supported_physical_layer_X550em(struct ixgbe_hw *hw);
+void ixgbe_disable_rx_x550(struct ixgbe_hw *hw);
+s32 ixgbe_get_lcd_t_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *lcd_speed);
+s32 ixgbe_enter_lplu_t_x550em(struct ixgbe_hw *hw);
+s32 ixgbe_acquire_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask);
+void ixgbe_release_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask);
+s32 ixgbe_setup_fc_X550em(struct ixgbe_hw *hw);
+s32 ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw,
+				    ixgbe_link_speed speed,
+				    bool autoneg_wait_to_complete);
+s32 ixgbe_handle_lasi_ext_t_x550em(struct ixgbe_hw *hw);
+s32 ixgbe_setup_mac_link_t_X550em(struct ixgbe_hw *hw,
+				  ixgbe_link_speed speed,
+				  bool autoneg_wait_to_complete);
+s32 ixgbe_check_link_t_X550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+			      bool *link_up, bool link_up_wait_to_complete);
+s32 ixgbe_reset_phy_t_X550em(struct ixgbe_hw *hw);
+s32 ixgbe_identify_sfp_module_X550em(struct ixgbe_hw *hw);
+s32 ixgbe_led_on_t_X550em(struct ixgbe_hw *hw, u32 led_idx);
+s32 ixgbe_led_off_t_X550em(struct ixgbe_hw *hw, u32 led_idx);
+#endif /* _IXGBE_X550_H_ */