New upstream version 18.11-rc1upstream/18.11-rc1

Change-Id: Iaa71986dd6332e878d8f4bf493101b2bbc6313bb
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>

1 files changed, 987 insertions, 0 deletions

diff --git a/drivers/net/mvneta/mvneta_ethdev.c b/drivers/net/mvneta/mvneta_ethdev.c
new file mode 100644
index 00000000..2d766645
--- /dev/null
+++ b/drivers/net/mvneta/mvneta_ethdev.c
@@ -0,0 +1,987 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018 Marvell International Ltd.
+ * Copyright(c) 2018 Semihalf.
+ * All rights reserved.
+ */
+
+#include <rte_ethdev_driver.h>
+#include <rte_kvargs.h>
+#include <rte_bus_vdev.h>
+
+#include <stdio.h>
+#include <fcntl.h>
+#include <linux/ethtool.h>
+#include <linux/sockios.h>
+#include <net/if.h>
+#include <net/if_arp.h>
+#include <sys/ioctl.h>
+#include <sys/socket.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+
+#include <rte_mvep_common.h>
+
+#include "mvneta_rxtx.h"
+
+
+#define MVNETA_IFACE_NAME_ARG "iface"
+
+#define MVNETA_RX_OFFLOADS (DEV_RX_OFFLOAD_JUMBO_FRAME | \
+			  DEV_RX_OFFLOAD_CHECKSUM)
+
+/** Port Tx offloads capabilities */
+#define MVNETA_TX_OFFLOADS (DEV_TX_OFFLOAD_IPV4_CKSUM | \
+			  DEV_TX_OFFLOAD_UDP_CKSUM | \
+			  DEV_TX_OFFLOAD_TCP_CKSUM | \
+			  DEV_TX_OFFLOAD_MULTI_SEGS)
+
+#define MVNETA_PKT_SIZE_MAX (16382 - MV_MH_SIZE) /* 9700B */
+#define MVNETA_DEFAULT_MTU 1500
+
+#define MVNETA_MAC_ADDRS_MAX 256 /*16 UC, 256 IP, 256 MC/BC */
+/** Maximum length of a match string */
+#define MVNETA_MATCH_LEN 16
+
+int mvneta_logtype;
+
+static const char * const valid_args[] = {
+	MVNETA_IFACE_NAME_ARG,
+	NULL
+};
+
+struct mvneta_ifnames {
+	const char *names[NETA_NUM_ETH_PPIO];
+	int idx;
+};
+
+static int mvneta_dev_num;
+
+/**
+ * Deinitialize packet processor.
+ */
+static void
+mvneta_neta_deinit(void)
+{
+	neta_deinit();
+}
+
+/**
+ * Initialize packet processor.
+ *
+ * @return
+ *   0 on success, negative error value otherwise.
+ */
+static int
+mvneta_neta_init(void)
+{
+	return neta_init();
+}
+
+/**
+ * Callback used by rte_kvargs_process() during argument parsing.
+ *
+ * @param key
+ *   Pointer to the parsed key (unused).
+ * @param value
+ *   Pointer to the parsed value.
+ * @param extra_args
+ *   Pointer to the extra arguments which contains address of the
+ *   table of pointers to parsed interface names.
+ *
+ * @return
+ *   Always 0.
+ */
+static int
+mvneta_ifnames_get(const char *key __rte_unused, const char *value,
+		 void *extra_args)
+{
+	struct mvneta_ifnames *ifnames = extra_args;
+
+	ifnames->names[ifnames->idx++] = value;
+
+	return 0;
+}
+
+/**
+ * Ethernet device configuration.
+ *
+ * Prepare the driver for a given number of TX and RX queues and
+ * configure RSS if supported.
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure.
+ *
+ * @return
+ *   0 on success, negative error value otherwise.
+ */
+static int
+mvneta_dev_configure(struct rte_eth_dev *dev)
+{
+	struct mvneta_priv *priv = dev->data->dev_private;
+	struct neta_ppio_params *ppio_params;
+
+	if (dev->data->dev_conf.rxmode.mq_mode != ETH_MQ_RX_NONE) {
+		MVNETA_LOG(INFO, "Unsupported RSS and rx multi queue mode %d",
+			dev->data->dev_conf.rxmode.mq_mode);
+		if (dev->data->nb_rx_queues > 1)
+			return -EINVAL;
+	}
+
+	if (dev->data->dev_conf.rxmode.split_hdr_size) {
+		MVNETA_LOG(INFO, "Split headers not supported");
+		return -EINVAL;
+	}
+
+	if (dev->data->dev_conf.rxmode.offloads & DEV_RX_OFFLOAD_JUMBO_FRAME)
+		dev->data->mtu = dev->data->dev_conf.rxmode.max_rx_pkt_len -
+				 MRVL_NETA_ETH_HDRS_LEN;
+
+	if (dev->data->dev_conf.txmode.offloads & DEV_TX_OFFLOAD_MULTI_SEGS)
+		priv->multiseg = 1;
+
+	ppio_params = &priv->ppio_params;
+	ppio_params->outqs_params.num_outqs = dev->data->nb_tx_queues;
+	/* Default: 1 TC, no QoS supported. */
+	ppio_params->inqs_params.num_tcs = 1;
+	ppio_params->inqs_params.tcs_params[0].pkt_offset = MRVL_NETA_PKT_OFFS;
+	priv->ppio_id = dev->data->port_id;
+
+	return 0;
+}
+
+/**
+ * DPDK callback to get information about the device.
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure (unused).
+ * @param info
+ *   Info structure output buffer.
+ */
+static void
+mvneta_dev_infos_get(struct rte_eth_dev *dev __rte_unused,
+		   struct rte_eth_dev_info *info)
+{
+	info->speed_capa = ETH_LINK_SPEED_10M |
+			   ETH_LINK_SPEED_100M |
+			   ETH_LINK_SPEED_1G |
+			   ETH_LINK_SPEED_2_5G;
+
+	info->max_rx_queues = MRVL_NETA_RXQ_MAX;
+	info->max_tx_queues = MRVL_NETA_TXQ_MAX;
+	info->max_mac_addrs = MVNETA_MAC_ADDRS_MAX;
+
+	info->rx_desc_lim.nb_max = MRVL_NETA_RXD_MAX;
+	info->rx_desc_lim.nb_min = MRVL_NETA_RXD_MIN;
+	info->rx_desc_lim.nb_align = MRVL_NETA_RXD_ALIGN;
+
+	info->tx_desc_lim.nb_max = MRVL_NETA_TXD_MAX;
+	info->tx_desc_lim.nb_min = MRVL_NETA_TXD_MIN;
+	info->tx_desc_lim.nb_align = MRVL_NETA_TXD_ALIGN;
+
+	info->rx_offload_capa = MVNETA_RX_OFFLOADS;
+	info->rx_queue_offload_capa = MVNETA_RX_OFFLOADS;
+
+	info->tx_offload_capa =  MVNETA_TX_OFFLOADS;
+	info->tx_queue_offload_capa =  MVNETA_TX_OFFLOADS;
+
+	/* By default packets are dropped if no descriptors are available */
+	info->default_rxconf.rx_drop_en = 1;
+	/* Deferred tx queue start is not supported */
+	info->default_txconf.tx_deferred_start = 0;
+	info->default_txconf.offloads = 0;
+
+	info->max_rx_pktlen = MVNETA_PKT_SIZE_MAX;
+}
+
+/**
+ * Return supported packet types.
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure (unused).
+ *
+ * @return
+ *   Const pointer to the table with supported packet types.
+ */
+static const uint32_t *
+mvneta_dev_supported_ptypes_get(struct rte_eth_dev *dev __rte_unused)
+{
+	static const uint32_t ptypes[] = {
+		RTE_PTYPE_L2_ETHER,
+		RTE_PTYPE_L2_ETHER_VLAN,
+		RTE_PTYPE_L3_IPV4,
+		RTE_PTYPE_L3_IPV6,
+		RTE_PTYPE_L4_TCP,
+		RTE_PTYPE_L4_UDP
+	};
+
+	return ptypes;
+}
+
+/**
+ * DPDK callback to change the MTU.
+ *
+ * Setting the MTU affects hardware MRU (packets larger than the MRU
+ * will be dropped).
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure.
+ * @param mtu
+ *   New MTU.
+ *
+ * @return
+ *   0 on success, negative error value otherwise.
+ */
+static int
+mvneta_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
+{
+	struct mvneta_priv *priv = dev->data->dev_private;
+	uint16_t mbuf_data_size = 0; /* SW buffer size */
+	uint16_t mru;
+	int ret;
+
+	mru = MRVL_NETA_MTU_TO_MRU(mtu);
+	/*
+	 * min_rx_buf_size is equal to mbuf data size
+	 * if pmd didn't set it differently
+	 */
+	mbuf_data_size = dev->data->min_rx_buf_size - RTE_PKTMBUF_HEADROOM;
+	/* Prevent PMD from:
+	 * - setting mru greater than the mbuf size resulting in
+	 * hw and sw buffer size mismatch
+	 * - setting mtu that requires the support of scattered packets
+	 * when this feature has not been enabled/supported so far.
+	 */
+	if (!dev->data->scattered_rx &&
+	    (mru + MRVL_NETA_PKT_OFFS > mbuf_data_size)) {
+		mru = mbuf_data_size - MRVL_NETA_PKT_OFFS;
+		mtu = MRVL_NETA_MRU_TO_MTU(mru);
+		MVNETA_LOG(WARNING, "MTU too big, max MTU possible limitted by"
+			" current mbuf size: %u. Set MTU to %u, MRU to %u",
+			mbuf_data_size, mtu, mru);
+	}
+
+	if (mtu < ETHER_MIN_MTU || mru > MVNETA_PKT_SIZE_MAX) {
+		MVNETA_LOG(ERR, "Invalid MTU [%u] or MRU [%u]", mtu, mru);
+		return -EINVAL;
+	}
+
+	dev->data->mtu = mtu;
+	dev->data->dev_conf.rxmode.max_rx_pkt_len = mru - MV_MH_SIZE;
+
+	if (!priv->ppio)
+		/* It is OK. New MTU will be set later on mvneta_dev_start */
+		return 0;
+
+	ret = neta_ppio_set_mru(priv->ppio, mru);
+	if (ret) {
+		MVNETA_LOG(ERR, "Failed to change MRU");
+		return ret;
+	}
+
+	ret = neta_ppio_set_mtu(priv->ppio, mtu);
+	if (ret) {
+		MVNETA_LOG(ERR, "Failed to change MTU");
+		return ret;
+	}
+	MVNETA_LOG(INFO, "MTU changed to %u, MRU = %u", mtu, mru);
+
+	return 0;
+}
+
+/**
+ * DPDK callback to bring the link up.
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure.
+ *
+ * @return
+ *   0 on success, negative error value otherwise.
+ */
+static int
+mvneta_dev_set_link_up(struct rte_eth_dev *dev)
+{
+	struct mvneta_priv *priv = dev->data->dev_private;
+
+	if (!priv->ppio)
+		return 0;
+
+	return neta_ppio_enable(priv->ppio);
+}
+
+/**
+ * DPDK callback to bring the link down.
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure.
+ *
+ * @return
+ *   0 on success, negative error value otherwise.
+ */
+static int
+mvneta_dev_set_link_down(struct rte_eth_dev *dev)
+{
+	struct mvneta_priv *priv = dev->data->dev_private;
+
+	if (!priv->ppio)
+		return 0;
+
+	return neta_ppio_disable(priv->ppio);
+}
+
+/**
+ * DPDK callback to start the device.
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure.
+ *
+ * @return
+ *   0 on success, negative errno value on failure.
+ */
+static int
+mvneta_dev_start(struct rte_eth_dev *dev)
+{
+	struct mvneta_priv *priv = dev->data->dev_private;
+	char match[MVNETA_MATCH_LEN];
+	int ret = 0, i;
+
+	if (priv->ppio)
+		return mvneta_dev_set_link_up(dev);
+
+	snprintf(match, sizeof(match), "%s", dev->data->name);
+	priv->ppio_params.match = match;
+	priv->ppio_params.inqs_params.mtu = dev->data->mtu;
+
+	ret = neta_ppio_init(&priv->ppio_params, &priv->ppio);
+	if (ret) {
+		MVNETA_LOG(ERR, "Failed to init ppio");
+		return ret;
+	}
+	priv->ppio_id = priv->ppio->port_id;
+
+	/*
+	 * In case there are some some stale uc/mc mac addresses flush them
+	 * here. It cannot be done during mvneta_dev_close() as port information
+	 * is already gone at that point (due to neta_ppio_deinit() in
+	 * mvneta_dev_stop()).
+	 */
+	if (!priv->uc_mc_flushed) {
+		ret = neta_ppio_flush_mac_addrs(priv->ppio, 0, 1);
+		if (ret) {
+			MVNETA_LOG(ERR,
+				"Failed to flush uc/mc filter list");
+			goto out;
+		}
+		priv->uc_mc_flushed = 1;
+	}
+
+	ret = mvneta_alloc_rx_bufs(dev);
+	if (ret)
+		goto out;
+
+	ret = mvneta_mtu_set(dev, dev->data->mtu);
+	if (ret) {
+		MVNETA_LOG(ERR, "Failed to set MTU %d", dev->data->mtu);
+		goto out;
+	}
+
+	ret = mvneta_dev_set_link_up(dev);
+	if (ret) {
+		MVNETA_LOG(ERR, "Failed to set link up");
+		goto out;
+	}
+
+	/* start tx queues */
+	for (i = 0; i < dev->data->nb_tx_queues; i++)
+		dev->data->tx_queue_state[i] = RTE_ETH_QUEUE_STATE_STARTED;
+
+	mvneta_set_tx_function(dev);
+
+	return 0;
+
+out:
+	MVNETA_LOG(ERR, "Failed to start device");
+	neta_ppio_deinit(priv->ppio);
+	return ret;
+}
+
+/**
+ * DPDK callback to stop the device.
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure.
+ */
+static void
+mvneta_dev_stop(struct rte_eth_dev *dev)
+{
+	struct mvneta_priv *priv = dev->data->dev_private;
+
+	if (!priv->ppio)
+		return;
+
+	mvneta_dev_set_link_down(dev);
+	mvneta_flush_queues(dev);
+	neta_ppio_deinit(priv->ppio);
+
+	priv->ppio = NULL;
+}
+
+/**
+ * DPDK callback to close the device.
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure.
+ */
+static void
+mvneta_dev_close(struct rte_eth_dev *dev)
+{
+	struct mvneta_priv *priv = dev->data->dev_private;
+	int i;
+
+	if (priv->ppio)
+		mvneta_dev_stop(dev);
+
+	for (i = 0; i < dev->data->nb_rx_queues; i++) {
+		mvneta_rx_queue_release(dev->data->rx_queues[i]);
+		dev->data->rx_queues[i] = NULL;
+	}
+
+	for (i = 0; i < dev->data->nb_tx_queues; i++) {
+		mvneta_tx_queue_release(dev->data->tx_queues[i]);
+		dev->data->tx_queues[i] = NULL;
+	}
+}
+
+/**
+ * DPDK callback to retrieve physical link information.
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure.
+ * @param wait_to_complete
+ *   Wait for request completion (ignored).
+ *
+ * @return
+ *   0 on success, negative error value otherwise.
+ */
+static int
+mvneta_link_update(struct rte_eth_dev *dev, int wait_to_complete __rte_unused)
+{
+	/*
+	 * TODO
+	 * once MUSDK provides necessary API use it here
+	 */
+	struct mvneta_priv *priv = dev->data->dev_private;
+	struct ethtool_cmd edata;
+	struct ifreq req;
+	int ret, fd, link_up;
+
+	if (!priv->ppio)
+		return -EPERM;
+
+	edata.cmd = ETHTOOL_GSET;
+
+	strcpy(req.ifr_name, dev->data->name);
+	req.ifr_data = (void *)&edata;
+
+	fd = socket(AF_INET, SOCK_DGRAM, 0);
+	if (fd == -1)
+		return -EFAULT;
+	ret = ioctl(fd, SIOCETHTOOL, &req);
+	if (ret == -1) {
+		close(fd);
+		return -EFAULT;
+	}
+
+	close(fd);
+
+	switch (ethtool_cmd_speed(&edata)) {
+	case SPEED_10:
+		dev->data->dev_link.link_speed = ETH_SPEED_NUM_10M;
+		break;
+	case SPEED_100:
+		dev->data->dev_link.link_speed = ETH_SPEED_NUM_100M;
+		break;
+	case SPEED_1000:
+		dev->data->dev_link.link_speed = ETH_SPEED_NUM_1G;
+		break;
+	case SPEED_2500:
+		dev->data->dev_link.link_speed = ETH_SPEED_NUM_2_5G;
+		break;
+	default:
+		dev->data->dev_link.link_speed = ETH_SPEED_NUM_NONE;
+	}
+
+	dev->data->dev_link.link_duplex = edata.duplex ? ETH_LINK_FULL_DUPLEX :
+							 ETH_LINK_HALF_DUPLEX;
+	dev->data->dev_link.link_autoneg = edata.autoneg ? ETH_LINK_AUTONEG :
+							   ETH_LINK_FIXED;
+
+	neta_ppio_get_link_state(priv->ppio, &link_up);
+	dev->data->dev_link.link_status = link_up ? ETH_LINK_UP : ETH_LINK_DOWN;
+
+	return 0;
+}
+
+/**
+ * DPDK callback to enable promiscuous mode.
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure.
+ */
+static void
+mvneta_promiscuous_enable(struct rte_eth_dev *dev)
+{
+	struct mvneta_priv *priv = dev->data->dev_private;
+	int ret, en;
+
+	if (!priv->ppio)
+		return;
+
+	neta_ppio_get_promisc(priv->ppio, &en);
+	if (en) {
+		MVNETA_LOG(INFO, "Promiscuous already enabled");
+		return;
+	}
+
+	ret = neta_ppio_set_promisc(priv->ppio, 1);
+	if (ret)
+		MVNETA_LOG(ERR, "Failed to enable promiscuous mode");
+}
+
+/**
+ * DPDK callback to disable allmulticast mode.
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure.
+ */
+static void
+mvneta_promiscuous_disable(struct rte_eth_dev *dev)
+{
+	struct mvneta_priv *priv = dev->data->dev_private;
+	int ret, en;
+
+	if (!priv->ppio)
+		return;
+
+	neta_ppio_get_promisc(priv->ppio, &en);
+	if (!en) {
+		MVNETA_LOG(INFO, "Promiscuous already disabled");
+		return;
+	}
+
+	ret = neta_ppio_set_promisc(priv->ppio, 0);
+	if (ret)
+		MVNETA_LOG(ERR, "Failed to disable promiscuous mode");
+}
+
+/**
+ * DPDK callback to remove a MAC address.
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure.
+ * @param index
+ *   MAC address index.
+ */
+static void
+mvneta_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index)
+{
+	struct mvneta_priv *priv = dev->data->dev_private;
+	char buf[ETHER_ADDR_FMT_SIZE];
+	int ret;
+
+	if (!priv->ppio)
+		return;
+
+	ret = neta_ppio_remove_mac_addr(priv->ppio,
+				       dev->data->mac_addrs[index].addr_bytes);
+	if (ret) {
+		ether_format_addr(buf, sizeof(buf),
+				  &dev->data->mac_addrs[index]);
+		MVNETA_LOG(ERR, "Failed to remove mac %s", buf);
+	}
+}
+
+/**
+ * DPDK callback to add a MAC address.
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure.
+ * @param mac_addr
+ *   MAC address to register.
+ * @param index
+ *   MAC address index.
+ * @param vmdq
+ *   VMDq pool index to associate address with (unused).
+ *
+ * @return
+ *   0 on success, negative error value otherwise.
+ */
+static int
+mvneta_mac_addr_add(struct rte_eth_dev *dev, struct ether_addr *mac_addr,
+		  uint32_t index, uint32_t vmdq __rte_unused)
+{
+	struct mvneta_priv *priv = dev->data->dev_private;
+	char buf[ETHER_ADDR_FMT_SIZE];
+	int ret;
+
+	if (index == 0)
+		/* For setting index 0, mrvl_mac_addr_set() should be used.*/
+		return -1;
+
+	if (!priv->ppio)
+		return 0;
+
+	ret = neta_ppio_add_mac_addr(priv->ppio, mac_addr->addr_bytes);
+	if (ret) {
+		ether_format_addr(buf, sizeof(buf), mac_addr);
+		MVNETA_LOG(ERR, "Failed to add mac %s", buf);
+		return -1;
+	}
+
+	return 0;
+}
+
+/**
+ * DPDK callback to set the primary MAC address.
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure.
+ * @param mac_addr
+ *   MAC address to register.
+ */
+static int
+mvneta_mac_addr_set(struct rte_eth_dev *dev, struct ether_addr *mac_addr)
+{
+	struct mvneta_priv *priv = dev->data->dev_private;
+	int ret;
+
+	if (!priv->ppio)
+		return -EINVAL;
+
+	ret = neta_ppio_set_mac_addr(priv->ppio, mac_addr->addr_bytes);
+	if (ret) {
+		char buf[ETHER_ADDR_FMT_SIZE];
+		ether_format_addr(buf, sizeof(buf), mac_addr);
+		MVNETA_LOG(ERR, "Failed to set mac to %s", buf);
+	}
+	return 0;
+}
+
+/**
+ * DPDK callback to get device statistics.
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure.
+ * @param stats
+ *   Stats structure output buffer.
+ *
+ * @return
+ *   0 on success, negative error value otherwise.
+ */
+static int
+mvneta_stats_get(struct rte_eth_dev *dev, struct rte_eth_stats *stats)
+{
+	struct mvneta_priv *priv = dev->data->dev_private;
+	struct neta_ppio_statistics ppio_stats;
+	unsigned int ret;
+
+	if (!priv->ppio)
+		return -EPERM;
+
+	ret = neta_ppio_get_statistics(priv->ppio, &ppio_stats);
+	if (unlikely(ret)) {
+		MVNETA_LOG(ERR, "Failed to update port statistics");
+		return ret;
+	}
+
+	stats->ipackets += ppio_stats.rx_packets +
+			ppio_stats.rx_broadcast_packets +
+			ppio_stats.rx_multicast_packets -
+			priv->prev_stats.ipackets;
+	stats->opackets += ppio_stats.tx_packets +
+			ppio_stats.tx_broadcast_packets +
+			ppio_stats.tx_multicast_packets -
+			priv->prev_stats.opackets;
+	stats->ibytes += ppio_stats.rx_bytes - priv->prev_stats.ibytes;
+	stats->obytes += ppio_stats.tx_bytes - priv->prev_stats.obytes;
+	stats->imissed += ppio_stats.rx_discard +
+			  ppio_stats.rx_overrun -
+			  priv->prev_stats.imissed;
+
+	stats->ierrors = ppio_stats.rx_packets_err +
+			ppio_stats.rx_errors +
+			ppio_stats.rx_crc_error -
+			priv->prev_stats.ierrors;
+	stats->oerrors = ppio_stats.tx_errors - priv->prev_stats.oerrors;
+
+	return 0;
+}
+
+/**
+ * DPDK callback to clear device statistics.
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure.
+ */
+static void
+mvneta_stats_reset(struct rte_eth_dev *dev)
+{
+	struct mvneta_priv *priv = dev->data->dev_private;
+	unsigned int ret;
+
+	if (!priv->ppio)
+		return;
+
+	ret = mvneta_stats_get(dev, &priv->prev_stats);
+	if (unlikely(ret))
+		RTE_LOG(ERR, PMD, "Failed to reset port statistics");
+}
+
+
+static const struct eth_dev_ops mvneta_ops = {
+	.dev_configure = mvneta_dev_configure,
+	.dev_start = mvneta_dev_start,
+	.dev_stop = mvneta_dev_stop,
+	.dev_set_link_up = mvneta_dev_set_link_up,
+	.dev_set_link_down = mvneta_dev_set_link_down,
+	.dev_close = mvneta_dev_close,
+	.link_update = mvneta_link_update,
+	.promiscuous_enable = mvneta_promiscuous_enable,
+	.promiscuous_disable = mvneta_promiscuous_disable,
+	.mac_addr_remove = mvneta_mac_addr_remove,
+	.mac_addr_add = mvneta_mac_addr_add,
+	.mac_addr_set = mvneta_mac_addr_set,
+	.mtu_set = mvneta_mtu_set,
+	.stats_get = mvneta_stats_get,
+	.stats_reset = mvneta_stats_reset,
+	.dev_infos_get = mvneta_dev_infos_get,
+	.dev_supported_ptypes_get = mvneta_dev_supported_ptypes_get,
+	.rxq_info_get = mvneta_rxq_info_get,
+	.txq_info_get = mvneta_txq_info_get,
+	.rx_queue_setup = mvneta_rx_queue_setup,
+	.rx_queue_release = mvneta_rx_queue_release,
+	.tx_queue_setup = mvneta_tx_queue_setup,
+	.tx_queue_release = mvneta_tx_queue_release,
+};
+
+/**
+ * Create device representing Ethernet port.
+ *
+ * @param name
+ *   Pointer to the port's name.
+ *
+ * @return
+ *   0 on success, negative error value otherwise.
+ */
+static int
+mvneta_eth_dev_create(struct rte_vdev_device *vdev, const char *name)
+{
+	int ret, fd = socket(AF_INET, SOCK_DGRAM, 0);
+	struct rte_eth_dev *eth_dev;
+	struct mvneta_priv *priv;
+	struct ifreq req;
+
+	eth_dev = rte_eth_dev_allocate(name);
+	if (!eth_dev)
+		return -ENOMEM;
+
+	priv = rte_zmalloc_socket(name, sizeof(*priv), 0, rte_socket_id());
+	if (!priv) {
+		ret = -ENOMEM;
+		goto out_free;
+	}
+	eth_dev->data->dev_private = priv;
+
+	eth_dev->data->mac_addrs =
+		rte_zmalloc("mac_addrs",
+			    ETHER_ADDR_LEN * MVNETA_MAC_ADDRS_MAX, 0);
+	if (!eth_dev->data->mac_addrs) {
+		MVNETA_LOG(ERR, "Failed to allocate space for eth addrs");
+		ret = -ENOMEM;
+		goto out_free;
+	}
+
+	memset(&req, 0, sizeof(req));
+	strcpy(req.ifr_name, name);
+	ret = ioctl(fd, SIOCGIFHWADDR, &req);
+	if (ret)
+		goto out_free;
+
+	memcpy(eth_dev->data->mac_addrs[0].addr_bytes,
+	       req.ifr_addr.sa_data, ETHER_ADDR_LEN);
+
+	eth_dev->data->kdrv = RTE_KDRV_NONE;
+	eth_dev->device = &vdev->device;
+	eth_dev->rx_pkt_burst = mvneta_rx_pkt_burst;
+	mvneta_set_tx_function(eth_dev);
+	eth_dev->dev_ops = &mvneta_ops;
+
+	rte_eth_dev_probing_finish(eth_dev);
+	return 0;
+out_free:
+	rte_eth_dev_release_port(eth_dev);
+
+	return ret;
+}
+
+/**
+ * Cleanup previously created device representing Ethernet port.
+ *
+ * @param eth_dev
+ *   Pointer to the corresponding rte_eth_dev structure.
+ */
+static void
+mvneta_eth_dev_destroy(struct rte_eth_dev *eth_dev)
+{
+	rte_eth_dev_release_port(eth_dev);
+}
+
+/**
+ * Cleanup previously created device representing Ethernet port.
+ *
+ * @param name
+ *   Pointer to the port name.
+ */
+static void
+mvneta_eth_dev_destroy_name(const char *name)
+{
+	struct rte_eth_dev *eth_dev;
+
+	eth_dev = rte_eth_dev_allocated(name);
+	if (!eth_dev)
+		return;
+
+	mvneta_eth_dev_destroy(eth_dev);
+}
+
+/**
+ * DPDK callback to register the virtual device.
+ *
+ * @param vdev
+ *   Pointer to the virtual device.
+ *
+ * @return
+ *   0 on success, negative error value otherwise.
+ */
+static int
+rte_pmd_mvneta_probe(struct rte_vdev_device *vdev)
+{
+	struct rte_kvargs *kvlist;
+	struct mvneta_ifnames ifnames;
+	int ret = -EINVAL;
+	uint32_t i, ifnum;
+	const char *params;
+
+	params = rte_vdev_device_args(vdev);
+	if (!params)
+		return -EINVAL;
+
+	kvlist = rte_kvargs_parse(params, valid_args);
+	if (!kvlist)
+		return -EINVAL;
+
+	ifnum = rte_kvargs_count(kvlist, MVNETA_IFACE_NAME_ARG);
+	if (ifnum > RTE_DIM(ifnames.names))
+		goto out_free_kvlist;
+
+	ifnames.idx = 0;
+	rte_kvargs_process(kvlist, MVNETA_IFACE_NAME_ARG,
+			   mvneta_ifnames_get, &ifnames);
+
+	/*
+	 * The below system initialization should be done only once,
+	 * on the first provided configuration file
+	 */
+	if (mvneta_dev_num)
+		goto init_devices;
+
+	MVNETA_LOG(INFO, "Perform MUSDK initializations");
+
+	ret = rte_mvep_init(MVEP_MOD_T_NETA, kvlist);
+	if (ret)
+		goto out_free_kvlist;
+
+	ret = mvneta_neta_init();
+	if (ret) {
+		MVNETA_LOG(ERR, "Failed to init NETA!");
+		rte_mvep_deinit(MVEP_MOD_T_NETA);
+		goto out_free_kvlist;
+	}
+
+init_devices:
+	for (i = 0; i < ifnum; i++) {
+		MVNETA_LOG(INFO, "Creating %s", ifnames.names[i]);
+		ret = mvneta_eth_dev_create(vdev, ifnames.names[i]);
+		if (ret)
+			goto out_cleanup;
+	}
+	mvneta_dev_num += ifnum;
+
+	rte_kvargs_free(kvlist);
+
+	return 0;
+out_cleanup:
+	for (; i > 0; i--)
+		mvneta_eth_dev_destroy_name(ifnames.names[i]);
+
+	if (mvneta_dev_num == 0) {
+		mvneta_neta_deinit();
+		rte_mvep_deinit(MVEP_MOD_T_NETA);
+	}
+out_free_kvlist:
+	rte_kvargs_free(kvlist);
+
+	return ret;
+}
+
+/**
+ * DPDK callback to remove virtual device.
+ *
+ * @param vdev
+ *   Pointer to the removed virtual device.
+ *
+ * @return
+ *   0 on success, negative error value otherwise.
+ */
+static int
+rte_pmd_mvneta_remove(struct rte_vdev_device *vdev)
+{
+	int i;
+	const char *name;
+
+	name = rte_vdev_device_name(vdev);
+	if (!name)
+		return -EINVAL;
+
+	MVNETA_LOG(INFO, "Removing %s", name);
+
+	RTE_ETH_FOREACH_DEV(i) {
+		if (rte_eth_devices[i].device != &vdev->device)
+			continue;
+
+		mvneta_eth_dev_destroy(&rte_eth_devices[i]);
+		mvneta_dev_num--;
+	}
+
+	if (mvneta_dev_num == 0) {
+		MVNETA_LOG(INFO, "Perform MUSDK deinit");
+		mvneta_neta_deinit();
+		rte_mvep_deinit(MVEP_MOD_T_NETA);
+	}
+
+	return 0;
+}
+
+static struct rte_vdev_driver pmd_mvneta_drv = {
+	.probe = rte_pmd_mvneta_probe,
+	.remove = rte_pmd_mvneta_remove,
+};
+
+RTE_PMD_REGISTER_VDEV(net_mvneta, pmd_mvneta_drv);
+RTE_PMD_REGISTER_PARAM_STRING(net_mvneta, "iface=<ifc>");
+
+RTE_INIT(mvneta_init_log)
+{
+	mvneta_logtype = rte_log_register("pmd.net.mvneta");
+	if (mvneta_logtype >= 0)
+		rte_log_set_level(mvneta_logtype, RTE_LOG_NOTICE);
+}