Imported Upstream version 16.04

Change-Id: I77eadcd8538a9122e4773cbe55b24033dc451757
Signed-off-by: C.J. Collier <cjcollier@linuxfoundation.org>

1 files changed, 85 insertions, 0 deletions

diff --git a/examples/ip_pipeline/config/edge_router_downstream.cfg b/examples/ip_pipeline/config/edge_router_downstream.cfg
new file mode 100644
index 00000000..85bbab8f
--- /dev/null
+++ b/examples/ip_pipeline/config/edge_router_downstream.cfg
@@ -0,0 +1,85 @@
+;   BSD LICENSE
+;
+;   Copyright(c) 2015 Intel Corporation. All rights reserved.
+;   All rights reserved.
+;
+;   Redistribution and use in source and binary forms, with or without
+;   modification, are permitted provided that the following conditions
+;   are met:
+;
+;     * Redistributions of source code must retain the above copyright
+;       notice, this list of conditions and the following disclaimer.
+;     * Redistributions in binary form must reproduce the above copyright
+;       notice, this list of conditions and the following disclaimer in
+;       the documentation and/or other materials provided with the
+;       distribution.
+;     * Neither the name of Intel Corporation nor the names of its
+;       contributors may be used to endorse or promote products derived
+;       from this software without specific prior written permission.
+;
+;   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+;   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+;   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+;   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+;   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+;   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+;   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+;   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+;   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+;   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+;   An edge router typically sits between two networks such as the provider
+;   core network and the provider access network. A typical packet processing
+;   pipeline for the downstream traffic (i.e. traffic from core to access
+;   network) contains the following functional blocks: Packet RX & Routing,
+;   Traffic management and Packet TX. The input packets are assumed to be
+;   IPv4, while the output packets are Q-in-Q IPv4.
+
+;  A simple implementation for this functional pipeline is presented below.
+
+;                  Packet Rx &                Traffic Management               Packet Tx
+;                   Routing                    (Pass-Through)                (Pass-Through)
+;             _____________________  SWQ0  ______________________  SWQ4  _____________________
+; RXQ0.0 --->|                     |----->|                      |----->|                     |---> TXQ0.0
+;            |                     | SWQ1 |                      | SWQ5 |                     |
+; RXQ1.0 --->|                     |----->|                      |----->|                     |---> TXQ1.0
+;            |        (P1)         | SWQ2 |         (P2)         | SWQ6 |        (P3)         |
+; RXQ2.0 --->|                     |----->|                      |----->|                     |---> TXQ2.0
+;            |                     | SWQ3 |                      | SWQ7 |                     |
+; RXQ3.0 --->|                     |----->|                      |----->|                     |---> TXQ3.0
+;            |_____________________|      |______________________|      |_____________________|
+;                       |                 _|_ ^ _|_ ^ _|_ ^ _|_ ^
+;                       |                |___|||___|||___|||___||
+;                       +--> SINK0       |___|||___|||___|||___||
+;                      (route miss)        |__|  |__|  |__|  |__|
+;                                          TM0   TM1   TM2   TM3
+
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = ROUTING
+core = 1
+pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0
+pktq_out = SWQ0 SWQ1 SWQ2 SWQ3 SINK0
+encap = ethernet_qinq
+qinq_sched = test
+ip_hdr_offset = 270; mbuf (128) + headroom (128) + ethernet header (14) = 270
+
+[PIPELINE2]
+type = PASS-THROUGH
+core = 2
+pktq_in = SWQ0 SWQ1 SWQ2 SWQ3 TM0 TM1 TM2 TM3
+pktq_out = TM0 TM1 TM2 TM3 SWQ4 SWQ5 SWQ6 SWQ7
+
+[PIPELINE3]
+type = PASS-THROUGH
+core = 3
+pktq_in = SWQ4 SWQ5 SWQ6 SWQ7
+pktq_out = TXQ0.0 TXQ1.0 TXQ2.0 TXQ3.0
+
+[MEMPOOL0]
+pool_size = 2M