Imported Upstream version 16.04

Change-Id: I77eadcd8538a9122e4773cbe55b24033dc451757
Signed-off-by: C.J. Collier <cjcollier@linuxfoundation.org>

1 files changed, 110 insertions, 0 deletions

diff --git a/examples/ip_pipeline/config/edge_router_upstream.cfg b/examples/ip_pipeline/config/edge_router_upstream.cfg
new file mode 100644
index 00000000..a08c5cce
--- /dev/null
+++ b/examples/ip_pipeline/config/edge_router_upstream.cfg
@@ -0,0 +1,110 @@
+;   BSD LICENSE
+;
+;   Copyright(c) 2015 Intel Corporation. All rights reserved.
+;   All rights reserved.
+;
+;   Redistribution and use in source and binary forms, with or without
+;   modification, are permitted provided that the following conditions
+;   are met:
+;
+;     * Redistributions of source code must retain the above copyright
+;       notice, this list of conditions and the following disclaimer.
+;     * Redistributions in binary form must reproduce the above copyright
+;       notice, this list of conditions and the following disclaimer in
+;       the documentation and/or other materials provided with the
+;       distribution.
+;     * Neither the name of Intel Corporation nor the names of its
+;       contributors may be used to endorse or promote products derived
+;       from this software without specific prior written permission.
+;
+;   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+;   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+;   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+;   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+;   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+;   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+;   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+;   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+;   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+;   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+;   An edge router typically sits between two networks such as the provider
+;   core network and the provider access network. A typical packet processing
+;   pipeline for the upstream traffic (i.e. traffic from access to core
+;   network) contains the following functional blocks: Packet RX & Firewall,
+;   Flow classification, Metering, Routing and Packet TX. The input packets
+;   are assumed to be Q-in-Q IPv4, while the output packets are MPLS IPv4
+;  (with variable number of labels per route).
+
+;   A simple implementation for this functional pipeline is presented below.
+
+;             Packet Rx &       Pass-Through    Flow-Classification   Flow-Actions         Routing
+:              Firewall
+;             __________  SWQ0   __________  SWQ4   __________  SWQ8   __________  SWQ12  __________
+; RXQ0.0 --->|          |------>|          |------>|          |------>|          |------>|          |------> TXQ0.0
+;            |          | SWQ1  |          | SWQ5  |          | SWQ9  |          | SWQ13 |          |
+; RXQ1.0 --->|          |------>|          |------>|          |------>|          |------>|          |------> TXQ1.0
+;            |   (P1)   | SWQ2  |  (P2)    | SWQ6  |   (P3)   | SWQ10 |   (P4)   | SWQ14 |   (P5)   |
+; RXQ2.0 --->|          |------>|          |------>|          |------>|          |------>|          |------> TXQ2.0
+;            |          | SWQ3  |          | SWQ7  |          | SWQ11 |          | SWQ15 |          |
+; RXQ3.0 --->|          |------>|          |------>|          |------>|          |------>|          |------> TXQ3.0
+;            |__________|       |__________|       |__________|       |__________|       |__________|
+;                 |                                     |                                     |
+;                 +--> SINK0 (Default)                  +--> SINK1 (Default)                  +--> SINK2 (Route Miss)
+
+
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = FIREWALL
+core = 1
+pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0
+pktq_out = SWQ0 SWQ1 SWQ2 SWQ3 SINK0
+n_rules = 4096
+pkt_type = qinq_ipv4
+
+[PIPELINE2]
+type = PASS-THROUGH
+core = 2
+pktq_in = SWQ0 SWQ1 SWQ2 SWQ3
+pktq_out = SWQ4 SWQ5 SWQ6 SWQ7
+dma_size = 8
+dma_dst_offset = 128; mbuf (128)
+dma_src_offset = 268; mbuf (128) + headroom (128) + 1st ethertype offset (12) = 268
+dma_src_mask = 00000FFF00000FFF; qinq
+dma_hash_offset = 136; dma_dst_offset + dma_size = 136
+
+[PIPELINE3]
+type = FLOW_CLASSIFICATION
+core = 2
+pktq_in = SWQ4 SWQ5 SWQ6 SWQ7
+pktq_out = SWQ8 SWQ9 SWQ10 SWQ11 SINK1
+n_flows = 65536
+key_size = 8; dma_size
+key_offset = 128; dma_dst_offset
+hash_offset = 136; dma_hash_offset
+flowid_offset = 192; mbuf (128) + 64
+
+[PIPELINE4]
+type = FLOW_ACTIONS
+core = 3
+pktq_in = SWQ8 SWQ9 SWQ10 SWQ11
+pktq_out = SWQ12 SWQ13 SWQ14 SWQ15
+n_flows = 65536
+n_meters_per_flow = 1
+flow_id_offset = 192; flowid_offset
+ip_hdr_offset = 278; mbuf (128) + headroom (128) + ethernet (14) + qinq (8) = 278
+color_offset = 196; flowid_offset + sizeof(flow_id)
+
+[PIPELINE5]
+type = ROUTING
+core = 4
+pktq_in = SWQ12 SWQ13 SWQ14 SWQ15
+pktq_out = TXQ0.0 TXQ1.0 TXQ2.0 TXQ3.0 SINK2
+encap = ethernet_mpls
+mpls_color_mark = yes
+ip_hdr_offset = 278; mbuf (128) + headroom (128) + ethernet (14) + qinq (8) = 278
+color_offset = 196; flowid_offset + sizeof(flow_id)