Imported Upstream version 16.07-rc2

Change-Id: Ie9e8ec528a2a0dace085c5e44aa7fa3b489d4ba0
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>

1 files changed, 343 insertions, 0 deletions

diff --git a/examples/ip_pipeline/config/diagram-generator.py b/examples/ip_pipeline/config/diagram-generator.py
new file mode 100755
index 00000000..f20cbcbb
--- /dev/null
+++ b/examples/ip_pipeline/config/diagram-generator.py
@@ -0,0 +1,343 @@
+#! /usr/bin/python2
+
+#   BSD LICENSE
+#
+#   Copyright(c) 2016 Intel Corporation. All rights reserved.
+#   All rights reserved.
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+#
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+#
+# This script creates a visual representation for a configuration file used by
+# the DPDK ip_pipeline application.
+#
+# The input configuration file is translated to an output file in DOT syntax,
+# which is then used to create the image file using graphviz (www.graphviz.org).
+#
+
+from __future__ import print_function
+import argparse
+import re
+import os
+
+#
+# Command to generate the image file
+#
+DOT_COMMAND = 'dot -Gsize=20,30 -Tpng %s > %s'
+
+#
+# Layout of generated DOT file
+#
+DOT_INTRO = \
+    '#\n# Command to generate image file:\n# \t%s\n#\n\n'
+DOT_GRAPH_BEGIN = \
+    'digraph g {\n  graph [ splines = true rankdir = "LR" ]\n'
+DOT_NODE_LINK_RX = \
+    '  "%s RX" [ shape = box style = filled fillcolor = yellowgreen ]\n'
+DOT_NODE_LINK_TX = \
+    '  "%s TX" [ shape = box style = filled fillcolor = yellowgreen ]\n'
+DOT_NODE_KNI_RX = \
+    '  "%s RX" [ shape = box style = filled fillcolor = orange ]\n'
+DOT_NODE_KNI_TX = \
+    '  "%s TX" [ shape = box style = filled fillcolor = orange ]\n'
+DOT_NODE_TAP_RX = \
+    '  "%s RX" [ shape = box style = filled fillcolor = gold ]\n'
+DOT_NODE_TAP_TX = \
+    '  "%s TX" [ shape = box style = filled fillcolor = gold ]\n'
+DOT_NODE_SOURCE = \
+    '  "%s" [ shape = box style = filled fillcolor = darkgreen ]\n'
+DOT_NODE_SINK = \
+    '  "%s" [ shape = box style = filled fillcolor = peachpuff ]\n'
+DOT_NODE_PIPELINE = \
+    '  "%s" [ shape = box style = filled fillcolor = royalblue ]\n'
+DOT_EDGE_PKTQ = \
+    '  "%s" -> "%s" [ label = "%s" color = gray ]\n'
+DOT_GRAPH_END = \
+    '}\n'
+
+# Relationships between the graph nodes and the graph edges:
+#
+# Edge ID | Edge Label | Writer Node | Reader Node   | Dependencies
+# --------+------------+-------------+---------------+--------------
+# RXQx.y  | RXQx.y     | LINKx       | PIPELINEz     | LINKx
+# TXQx.y  | TXQx.y     | PIPELINEz   | LINKx         | LINKx
+# SWQx    | SWQx       | PIPELINEy   | PIPELINEz     | -
+# TMx     | TMx        | PIPELINEy   | PIPELINEz     | LINKx
+# KNIx RX | KNIx       | KNIx RX     | PIPELINEy     | KNIx, LINKx
+# KNIx TX | KNIx       | PIPELINEy   | KNIx TX       | KNIx, LINKx
+# TAPx RX | TAPx       | TAPx RX     | PIPELINEy     | TAPx
+# TAPx TX | TAPx       | PIPELINEy   | TAPx TX       | TAPx
+# SOURCEx | SOURCEx    | SOURCEx     | PIPELINEy     | SOURCEx
+# SINKx   | SINKx      | PIPELINEy   | SINKx         | SINKx
+
+#
+# Parse the input configuration file to detect the graph nodes and edges
+#
+def process_config_file(cfgfile):
+    edges = {}
+    links = set()
+    knis = set()
+    taps = set()
+    sources = set()
+    sinks = set()
+    pipelines = set()
+    pipeline = ''
+
+    dotfile = cfgfile + '.txt'
+    imgfile = cfgfile + '.png'
+
+    #
+    # Read configuration file
+    #
+    lines = open(cfgfile, 'r')
+    for line in lines:
+        # Remove any leading and trailing white space characters
+        line = line.strip()
+
+        # Remove any comment at end of line
+        line, sep, tail = line.partition(';')
+
+        # Look for next "PIPELINE" section
+        match = re.search(r'\[(PIPELINE\d+)\]', line)
+        if match:
+            pipeline = match.group(1)
+            continue
+
+        # Look for next "pktq_in" section entry
+        match = re.search(r'pktq_in\s*=\s*(.+)', line)
+        if match:
+            pipelines.add(pipeline)
+            for q in re.findall('\S+', match.group(1)):
+                match_rxq = re.search(r'^RXQ(\d+)\.\d+$', q)
+                match_swq = re.search(r'^SWQ\d+$', q)
+                match_tm = re.search(r'^TM(\d+)$', q)
+                match_kni = re.search(r'^KNI(\d+)$', q)
+                match_tap = re.search(r'^TAP\d+$', q)
+                match_source = re.search(r'^SOURCE\d+$', q)
+
+                # Set ID for the current packet queue (graph edge)
+                q_id = ''
+                if match_rxq or match_swq or match_tm or match_source:
+                    q_id = q
+                elif match_kni or match_tap:
+                    q_id = q + ' RX'
+                else:
+                    print('Error: Unrecognized pktq_in element "%s"' % q)
+                    return
+
+                # Add current packet queue to the set of graph edges
+                if q_id not in edges:
+                    edges[q_id] = {}
+                if 'label' not in edges[q_id]:
+                    edges[q_id]['label'] = q
+                if 'readers' not in edges[q_id]:
+                    edges[q_id]['readers'] = []
+                if 'writers' not in edges[q_id]:
+                    edges[q_id]['writers'] = []
+
+                # Add reader for the new edge
+                edges[q_id]['readers'].append(pipeline)
+
+                # Check for RXQ
+                if match_rxq:
+                    link = 'LINK' + str(match_rxq.group(1))
+                    edges[q_id]['writers'].append(link + ' RX')
+                    links.add(link)
+                    continue
+
+                # Check for SWQ
+                if match_swq:
+                    continue
+
+                # Check for TM
+                if match_tm:
+                    link = 'LINK' + str(match_tm.group(1))
+                    links.add(link)
+                    continue
+
+                # Check for KNI
+                if match_kni:
+                    link = 'LINK' + str(match_kni.group(1))
+                    edges[q_id]['writers'].append(q_id)
+                    knis.add(q)
+                    links.add(link)
+                    continue
+
+                # Check for TAP
+                if match_tap:
+                    edges[q_id]['writers'].append(q_id)
+                    taps.add(q)
+                    continue
+
+                # Check for SOURCE
+                if match_source:
+                    edges[q_id]['writers'].append(q)
+                    sources.add(q)
+                    continue
+
+                continue
+
+        # Look for next "pktq_out" section entry
+        match = re.search(r'pktq_out\s*=\s*(.+)', line)
+        if match:
+            for q in re.findall('\S+', match.group(1)):
+                match_txq = re.search(r'^TXQ(\d+)\.\d+$', q)
+                match_swq = re.search(r'^SWQ\d+$', q)
+                match_tm = re.search(r'^TM(\d+)$', q)
+                match_kni = re.search(r'^KNI(\d+)$', q)
+                match_tap = re.search(r'^TAP(\d+)$', q)
+                match_sink = re.search(r'^SINK(\d+)$', q)
+
+                # Set ID for the current packet queue (graph edge)
+                q_id = ''
+                if match_txq or match_swq or match_tm or match_sink:
+                    q_id = q
+                elif match_kni or match_tap:
+                    q_id = q + ' TX'
+                else:
+                    print('Error: Unrecognized pktq_out element "%s"' % q)
+                    return
+
+                # Add current packet queue to the set of graph edges
+                if q_id not in edges:
+                    edges[q_id] = {}
+                if 'label' not in edges[q_id]:
+                    edges[q_id]['label'] = q
+                if 'readers' not in edges[q_id]:
+                    edges[q_id]['readers'] = []
+                if 'writers' not in edges[q_id]:
+                    edges[q_id]['writers'] = []
+
+                # Add writer for the new edge
+                edges[q_id]['writers'].append(pipeline)
+
+                # Check for TXQ
+                if match_txq:
+                    link = 'LINK' + str(match_txq.group(1))
+                    edges[q_id]['readers'].append(link + ' TX')
+                    links.add(link)
+                    continue
+
+                # Check for SWQ
+                if match_swq:
+                    continue
+
+                # Check for TM
+                if match_tm:
+                    link = 'LINK' + str(match_tm.group(1))
+                    links.add(link)
+                    continue
+
+                # Check for KNI
+                if match_kni:
+                    link = 'LINK' + str(match_kni.group(1))
+                    edges[q_id]['readers'].append(q_id)
+                    knis.add(q)
+                    links.add(link)
+                    continue
+
+                # Check for TAP
+                if match_tap:
+                    edges[q_id]['readers'].append(q_id)
+                    taps.add(q)
+                    continue
+
+                # Check for SINK
+                if match_sink:
+                    edges[q_id]['readers'].append(q)
+                    sinks.add(q)
+                    continue
+
+                continue
+
+    #
+    # Write DOT file
+    #
+    print('Creating DOT file "%s" ...' % dotfile)
+    dot_cmd = DOT_COMMAND % (dotfile, imgfile)
+    file = open(dotfile, 'w')
+    file.write(DOT_INTRO % dot_cmd)
+    file.write(DOT_GRAPH_BEGIN)
+
+    # Write the graph nodes to the DOT file
+    for l in sorted(links):
+        file.write(DOT_NODE_LINK_RX % l)
+        file.write(DOT_NODE_LINK_TX % l)
+    for k in sorted(knis):
+        file.write(DOT_NODE_KNI_RX % k)
+        file.write(DOT_NODE_KNI_TX % k)
+    for t in sorted(taps):
+        file.write(DOT_NODE_TAP_RX % t)
+        file.write(DOT_NODE_TAP_TX % t)
+    for s in sorted(sources):
+        file.write(DOT_NODE_SOURCE % s)
+    for s in sorted(sinks):
+        file.write(DOT_NODE_SINK % s)
+    for p in sorted(pipelines):
+        file.write(DOT_NODE_PIPELINE % p)
+
+    # Write the graph edges to the DOT file
+    for q in sorted(edges.keys()):
+        rw = edges[q]
+        if 'writers' not in rw:
+            print('Error: "%s" has no writer' % q)
+            return
+        if 'readers' not in rw:
+            print('Error: "%s" has no reader' % q)
+            return
+        for w in rw['writers']:
+            for r in rw['readers']:
+                file.write(DOT_EDGE_PKTQ % (w, r, rw['label']))
+
+    file.write(DOT_GRAPH_END)
+    file.close()
+
+    #
+    # Execute the DOT command to create the image file
+    #
+    print('Creating image file "%s" ...' % imgfile)
+    if os.system('which dot > /dev/null'):
+        print('Error: Unable to locate "dot" executable.' \
+            'Please install the "graphviz" package (www.graphviz.org).')
+        return
+
+    os.system(dot_cmd)
+
+
+if __name__ == '__main__':
+    parser = argparse.ArgumentParser(description=\
+        'Create diagram for IP pipeline configuration file.')
+
+    parser.add_argument(
+        '-f',
+        '--file',
+        help='input configuration file (e.g. "ip_pipeline.cfg")',
+        required=True)
+
+    args = parser.parse_args()
+
+    process_config_file(args.file)