Imported Upstream version 16.04

Change-Id: I77eadcd8538a9122e4773cbe55b24033dc451757
Signed-off-by: C.J. Collier <cjcollier@linuxfoundation.org>

10 files changed, 489 insertions, 0 deletions

diff --git a/examples/ip_pipeline/config/edge_router_downstream.cfg b/examples/ip_pipeline/config/edge_router_downstream.cfg
new file mode 100644
index 00000000..85bbab8f
--- /dev/null
+++ b/examples/ip_pipeline/config/edge_router_downstream.cfg
@@ -0,0 +1,85 @@
+;   BSD LICENSE
+;
+;   Copyright(c) 2015 Intel Corporation. All rights reserved.
+;   All rights reserved.
+;
+;   Redistribution and use in source and binary forms, with or without
+;   modification, are permitted provided that the following conditions
+;   are met:
+;
+;     * Redistributions of source code must retain the above copyright
+;       notice, this list of conditions and the following disclaimer.
+;     * Redistributions in binary form must reproduce the above copyright
+;       notice, this list of conditions and the following disclaimer in
+;       the documentation and/or other materials provided with the
+;       distribution.
+;     * Neither the name of Intel Corporation nor the names of its
+;       contributors may be used to endorse or promote products derived
+;       from this software without specific prior written permission.
+;
+;   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+;   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+;   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+;   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+;   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+;   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+;   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+;   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+;   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+;   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+;   An edge router typically sits between two networks such as the provider
+;   core network and the provider access network. A typical packet processing
+;   pipeline for the downstream traffic (i.e. traffic from core to access
+;   network) contains the following functional blocks: Packet RX & Routing,
+;   Traffic management and Packet TX. The input packets are assumed to be
+;   IPv4, while the output packets are Q-in-Q IPv4.
+
+;  A simple implementation for this functional pipeline is presented below.
+
+;                  Packet Rx &                Traffic Management               Packet Tx
+;                   Routing                    (Pass-Through)                (Pass-Through)
+;             _____________________  SWQ0  ______________________  SWQ4  _____________________
+; RXQ0.0 --->|                     |----->|                      |----->|                     |---> TXQ0.0
+;            |                     | SWQ1 |                      | SWQ5 |                     |
+; RXQ1.0 --->|                     |----->|                      |----->|                     |---> TXQ1.0
+;            |        (P1)         | SWQ2 |         (P2)         | SWQ6 |        (P3)         |
+; RXQ2.0 --->|                     |----->|                      |----->|                     |---> TXQ2.0
+;            |                     | SWQ3 |                      | SWQ7 |                     |
+; RXQ3.0 --->|                     |----->|                      |----->|                     |---> TXQ3.0
+;            |_____________________|      |______________________|      |_____________________|
+;                       |                 _|_ ^ _|_ ^ _|_ ^ _|_ ^
+;                       |                |___|||___|||___|||___||
+;                       +--> SINK0       |___|||___|||___|||___||
+;                      (route miss)        |__|  |__|  |__|  |__|
+;                                          TM0   TM1   TM2   TM3
+
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = ROUTING
+core = 1
+pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0
+pktq_out = SWQ0 SWQ1 SWQ2 SWQ3 SINK0
+encap = ethernet_qinq
+qinq_sched = test
+ip_hdr_offset = 270; mbuf (128) + headroom (128) + ethernet header (14) = 270
+
+[PIPELINE2]
+type = PASS-THROUGH
+core = 2
+pktq_in = SWQ0 SWQ1 SWQ2 SWQ3 TM0 TM1 TM2 TM3
+pktq_out = TM0 TM1 TM2 TM3 SWQ4 SWQ5 SWQ6 SWQ7
+
+[PIPELINE3]
+type = PASS-THROUGH
+core = 3
+pktq_in = SWQ4 SWQ5 SWQ6 SWQ7
+pktq_out = TXQ0.0 TXQ1.0 TXQ2.0 TXQ3.0
+
+[MEMPOOL0]
+pool_size = 2M
diff --git a/examples/ip_pipeline/config/edge_router_downstream.sh b/examples/ip_pipeline/config/edge_router_downstream.sh
new file mode 100644
index 00000000..ce46beb5
--- /dev/null
+++ b/examples/ip_pipeline/config/edge_router_downstream.sh
@@ -0,0 +1,10 @@
+################################################################################
+# Routing: Ether QinQ, ARP off
+################################################################################
+p 1 route add default 4 #SINK0
+p 1 route add 0.0.0.0 10 port 0 ether a0:b0:c0:d0:e0:f0 qinq 256 257
+p 1 route add 0.64.0.0 10 port 1 ether a1:b1:c1:d1:e1:f1 qinq 258 259
+p 1 route add 0.128.0.0 10 port 2 ether a2:b2:c2:d2:e2:f2 qinq 260 261
+p 1 route add 0.192.0.0 10 port 3 ether a3:b3:c3:d3:e3:f3 qinq 262 263
+
+p 1 route ls
diff --git a/examples/ip_pipeline/config/edge_router_upstream.cfg b/examples/ip_pipeline/config/edge_router_upstream.cfg
new file mode 100644
index 00000000..a08c5cce
--- /dev/null
+++ b/examples/ip_pipeline/config/edge_router_upstream.cfg
@@ -0,0 +1,110 @@
+;   BSD LICENSE
+;
+;   Copyright(c) 2015 Intel Corporation. All rights reserved.
+;   All rights reserved.
+;
+;   Redistribution and use in source and binary forms, with or without
+;   modification, are permitted provided that the following conditions
+;   are met:
+;
+;     * Redistributions of source code must retain the above copyright
+;       notice, this list of conditions and the following disclaimer.
+;     * Redistributions in binary form must reproduce the above copyright
+;       notice, this list of conditions and the following disclaimer in
+;       the documentation and/or other materials provided with the
+;       distribution.
+;     * Neither the name of Intel Corporation nor the names of its
+;       contributors may be used to endorse or promote products derived
+;       from this software without specific prior written permission.
+;
+;   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+;   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+;   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+;   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+;   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+;   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+;   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+;   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+;   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+;   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+;   An edge router typically sits between two networks such as the provider
+;   core network and the provider access network. A typical packet processing
+;   pipeline for the upstream traffic (i.e. traffic from access to core
+;   network) contains the following functional blocks: Packet RX & Firewall,
+;   Flow classification, Metering, Routing and Packet TX. The input packets
+;   are assumed to be Q-in-Q IPv4, while the output packets are MPLS IPv4
+;  (with variable number of labels per route).
+
+;   A simple implementation for this functional pipeline is presented below.
+
+;             Packet Rx &       Pass-Through    Flow-Classification   Flow-Actions         Routing
+:              Firewall
+;             __________  SWQ0   __________  SWQ4   __________  SWQ8   __________  SWQ12  __________
+; RXQ0.0 --->|          |------>|          |------>|          |------>|          |------>|          |------> TXQ0.0
+;            |          | SWQ1  |          | SWQ5  |          | SWQ9  |          | SWQ13 |          |
+; RXQ1.0 --->|          |------>|          |------>|          |------>|          |------>|          |------> TXQ1.0
+;            |   (P1)   | SWQ2  |  (P2)    | SWQ6  |   (P3)   | SWQ10 |   (P4)   | SWQ14 |   (P5)   |
+; RXQ2.0 --->|          |------>|          |------>|          |------>|          |------>|          |------> TXQ2.0
+;            |          | SWQ3  |          | SWQ7  |          | SWQ11 |          | SWQ15 |          |
+; RXQ3.0 --->|          |------>|          |------>|          |------>|          |------>|          |------> TXQ3.0
+;            |__________|       |__________|       |__________|       |__________|       |__________|
+;                 |                                     |                                     |
+;                 +--> SINK0 (Default)                  +--> SINK1 (Default)                  +--> SINK2 (Route Miss)
+
+
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = FIREWALL
+core = 1
+pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0
+pktq_out = SWQ0 SWQ1 SWQ2 SWQ3 SINK0
+n_rules = 4096
+pkt_type = qinq_ipv4
+
+[PIPELINE2]
+type = PASS-THROUGH
+core = 2
+pktq_in = SWQ0 SWQ1 SWQ2 SWQ3
+pktq_out = SWQ4 SWQ5 SWQ6 SWQ7
+dma_size = 8
+dma_dst_offset = 128; mbuf (128)
+dma_src_offset = 268; mbuf (128) + headroom (128) + 1st ethertype offset (12) = 268
+dma_src_mask = 00000FFF00000FFF; qinq
+dma_hash_offset = 136; dma_dst_offset + dma_size = 136
+
+[PIPELINE3]
+type = FLOW_CLASSIFICATION
+core = 2
+pktq_in = SWQ4 SWQ5 SWQ6 SWQ7
+pktq_out = SWQ8 SWQ9 SWQ10 SWQ11 SINK1
+n_flows = 65536
+key_size = 8; dma_size
+key_offset = 128; dma_dst_offset
+hash_offset = 136; dma_hash_offset
+flowid_offset = 192; mbuf (128) + 64
+
+[PIPELINE4]
+type = FLOW_ACTIONS
+core = 3
+pktq_in = SWQ8 SWQ9 SWQ10 SWQ11
+pktq_out = SWQ12 SWQ13 SWQ14 SWQ15
+n_flows = 65536
+n_meters_per_flow = 1
+flow_id_offset = 192; flowid_offset
+ip_hdr_offset = 278; mbuf (128) + headroom (128) + ethernet (14) + qinq (8) = 278
+color_offset = 196; flowid_offset + sizeof(flow_id)
+
+[PIPELINE5]
+type = ROUTING
+core = 4
+pktq_in = SWQ12 SWQ13 SWQ14 SWQ15
+pktq_out = TXQ0.0 TXQ1.0 TXQ2.0 TXQ3.0 SINK2
+encap = ethernet_mpls
+mpls_color_mark = yes
+ip_hdr_offset = 278; mbuf (128) + headroom (128) + ethernet (14) + qinq (8) = 278
+color_offset = 196; flowid_offset + sizeof(flow_id)
diff --git a/examples/ip_pipeline/config/edge_router_upstream.sh b/examples/ip_pipeline/config/edge_router_upstream.sh
new file mode 100644
index 00000000..eeba600c
--- /dev/null
+++ b/examples/ip_pipeline/config/edge_router_upstream.sh
@@ -0,0 +1,38 @@
+################################################
+# Firewall Rules:4 for 4 ports
+################################################
+p 1 firewall add ipv4 1 0.0.0.0 8 0.0.0.0 10 0 0 0 0 6 1 0
+p 1 firewall add ipv4 1 0.0.0.0 8 0.64.0.0 10 0 0 0 0 6 1 1
+p 1 firewall add ipv4 1 0.0.0.0 8 0.128.0.0 10 0 0 0 0 6 1 2
+p 1 firewall add ipv4 1 0.0.0.0 8 0.192.0.0 10 0 0 0 0 6 1 3
+p 1 firewall add default 4 #SINK0
+
+
+################################################################################
+# Flow classification
+################################################################################
+p 3 flow add default 4 #SINK1
+p 3 flow add qinq all 65536 4
+
+################################################################################
+# Flow Actions - Metering
+################################################################################
+p 4 flows 65536 meter 0 trtcm 1250000000 1250000000 100000000 100000000
+p 4 flows 65536 ports 4
+
+################################################################################
+# Routing: Ether MPLS, ARP off
+################################################################################
+p 5 route add default 4 #SINK2
+p 5 route add 0.0.0.0 10 port 0 ether a0:b0:c0:d0:e0:f0 mpls 0:1
+p 5 route add 0.64.0.0 10 port 1 ether a1:b1:c1:d1:e1:f1 mpls 10:11
+p 5 route add 0.128.0.0 10 port 2 ether a2:b2:c2:d2:e2:f2 mpls 20:21
+p 5 route add 0.192.0.0 10 port 3 ether a3:b3:c3:d3:e3:f3 mpls 30:31
+
+################################################################################
+# List all configurations
+################################################################################
+p 1 firewall ls
+#p 3 flow ls
+#p 4 flow actions ls
+p 5 route ls
diff --git a/examples/ip_pipeline/config/ip_pipeline.cfg b/examples/ip_pipeline/config/ip_pipeline.cfg
new file mode 100644
index 00000000..095ed25e
--- /dev/null
+++ b/examples/ip_pipeline/config/ip_pipeline.cfg
@@ -0,0 +1,9 @@
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0
+pktq_out = TXQ0.0 TXQ1.0 TXQ2.0 TXQ3.0
diff --git a/examples/ip_pipeline/config/ip_pipeline.sh b/examples/ip_pipeline/config/ip_pipeline.sh
new file mode 100644
index 00000000..4fca2597
--- /dev/null
+++ b/examples/ip_pipeline/config/ip_pipeline.sh
@@ -0,0 +1,5 @@
+#
+#run config/ip_pipeline.sh
+#
+
+p 1 ping
diff --git a/examples/ip_pipeline/config/l2fwd.cfg b/examples/ip_pipeline/config/l2fwd.cfg
new file mode 100644
index 00000000..c743a143
--- /dev/null
+++ b/examples/ip_pipeline/config/l2fwd.cfg
@@ -0,0 +1,55 @@
+;   BSD LICENSE
+;
+;   Copyright(c) 2015 Intel Corporation. All rights reserved.
+;   All rights reserved.
+;
+;   Redistribution and use in source and binary forms, with or without
+;   modification, are permitted provided that the following conditions
+;   are met:
+;
+;     * Redistributions of source code must retain the above copyright
+;       notice, this list of conditions and the following disclaimer.
+;     * Redistributions in binary form must reproduce the above copyright
+;       notice, this list of conditions and the following disclaimer in
+;       the documentation and/or other materials provided with the
+;       distribution.
+;     * Neither the name of Intel Corporation nor the names of its
+;       contributors may be used to endorse or promote products derived
+;       from this software without specific prior written permission.
+;
+;   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+;   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+;   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+;   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+;   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+;   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+;   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+;   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+;   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+;   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+;
+; The pass-through pipeline below connects the input ports to the output ports
+; as follows: RXQ0.0 -> TXQ1.0, RXQ1.0 -> TXQ0.0, RXQ2.0 -> TXQ3.0 and
+; RXQ3.0 -> TXQ2.0.
+;             ________________
+; RXQ0.0 --->|................|---> TXQ1.0
+;            |                |
+; RXQ1.0 --->|................|---> TXQ0.0
+;            |  Pass-through  |
+; RXQ2.0 --->|................|---> TXQ3.0
+;            |                |
+; RXQ3.0 --->|................|---> TXQ2.0
+;            |________________|
+;
+
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0
+pktq_out = TXQ1.0 TXQ0.0 TXQ3.0 TXQ2.0
diff --git a/examples/ip_pipeline/config/l3fwd.cfg b/examples/ip_pipeline/config/l3fwd.cfg
new file mode 100644
index 00000000..5449dc32
--- /dev/null
+++ b/examples/ip_pipeline/config/l3fwd.cfg
@@ -0,0 +1,63 @@
+;   BSD LICENSE
+;
+;   Copyright(c) 2015 Intel Corporation. All rights reserved.
+;   All rights reserved.
+;
+;   Redistribution and use in source and binary forms, with or without
+;   modification, are permitted provided that the following conditions
+;   are met:
+;
+;     * Redistributions of source code must retain the above copyright
+;       notice, this list of conditions and the following disclaimer.
+;     * Redistributions in binary form must reproduce the above copyright
+;       notice, this list of conditions and the following disclaimer in
+;       the documentation and/or other materials provided with the
+;       distribution.
+;     * Neither the name of Intel Corporation nor the names of its
+;       contributors may be used to endorse or promote products derived
+;       from this software without specific prior written permission.
+;
+;   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+;   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+;   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+;   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+;   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+;   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+;   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+;   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+;   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+;   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+;             _______________
+; RXQ0.0 --->|               |---> TXQ0.0
+;            |               |
+; RXQ1.0 --->|               |---> TXQ1.0
+;            |    Routing    |
+; RXQ2.0 --->|               |---> TXQ2.0
+;            |               |
+; RXQ3.0 --->|               |---> TXQ3.0
+;            |_______________|
+;                    |
+;                    +-----------> SINK0 (route miss)
+;
+; Input packet: Ethernet/IPv4
+;
+; Packet buffer layout:
+; #	Field Name		Offset (Bytes)	Size (Bytes)
+; 0	Mbuf			0 		128
+; 1	Headroom		128 		128
+; 2	Ethernet header		256 		14
+; 3	IPv4 header		270 		20
+
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = ROUTING
+core = 1
+pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0
+pktq_out = TXQ0.0 TXQ1.0 TXQ2.0 TXQ3.0 SINK0
+encap = ethernet; encap = ethernet / ethernet_qinq / ethernet_mpls
+ip_hdr_offset = 270
diff --git a/examples/ip_pipeline/config/l3fwd.sh b/examples/ip_pipeline/config/l3fwd.sh
new file mode 100644
index 00000000..27740103
--- /dev/null
+++ b/examples/ip_pipeline/config/l3fwd.sh
@@ -0,0 +1,9 @@
+################################################################################
+# Routing: encap = ethernet, arp = off
+################################################################################
+p 1 route add default 4 #SINK0
+p 1 route add 0.0.0.0 10 port 0 ether a0:b0:c0:d0:e0:f0
+p 1 route add 0.64.0.0 10 port 1 ether a1:b1:c1:d1:e1:f1
+p 1 route add 0.128.0.0 10 port 2 ether a2:b2:c2:d2:e2:f2
+p 1 route add 0.192.0.0 10 port 3 ether a3:b3:c3:d3:e3:f3
+p 1 route ls
diff --git a/examples/ip_pipeline/config/tm_profile.cfg b/examples/ip_pipeline/config/tm_profile.cfg
new file mode 100644
index 00000000..2dfb215e
--- /dev/null
+++ b/examples/ip_pipeline/config/tm_profile.cfg
@@ -0,0 +1,105 @@
+;   BSD LICENSE
+;
+;   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+;   All rights reserved.
+;
+;   Redistribution and use in source and binary forms, with or without
+;   modification, are permitted provided that the following conditions
+;   are met:
+;
+;     * Redistributions of source code must retain the above copyright
+;       notice, this list of conditions and the following disclaimer.
+;     * Redistributions in binary form must reproduce the above copyright
+;       notice, this list of conditions and the following disclaimer in
+;       the documentation and/or other materials provided with the
+;       distribution.
+;     * Neither the name of Intel Corporation nor the names of its
+;       contributors may be used to endorse or promote products derived
+;       from this software without specific prior written permission.
+;
+;   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+;   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+;   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+;   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+;   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+;   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+;   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+;   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+;   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+;   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+; This file enables the following hierarchical scheduler configuration for each
+; 10GbE output port:
+;	* Single subport (subport 0):
+;		- Subport rate set to 100% of port rate
+;		- Each of the 4 traffic classes has rate set to 100% of port rate
+;	* 4K pipes per subport 0 (pipes 0 .. 4095) with identical configuration:
+;		- Pipe rate set to 1/4K of port rate
+;		- Each of the 4 traffic classes has rate set to 100% of pipe rate
+;		- Within each traffic class, the byte-level WRR weights for the 4 queues
+;         are set to 1:1:1:1
+;
+; For more details, please refer to chapter "Quality of Service (QoS) Framework"
+; of Data Plane Development Kit (DPDK) Programmer's Guide.
+
+; Port configuration
+[port]
+frame overhead = 24 ; frame overhead = Preamble (7) + SFD (1) + FCS (4) + IFG (12)
+mtu = 1522; mtu = Q-in-Q MTU (FCS not included)
+number of subports per port = 1
+number of pipes per subport = 4096
+queue sizes = 64 64 64 64
+
+; Subport configuration
+[subport 0]
+tb rate = 1250000000           ; Bytes per second
+tb size = 1000000              ; Bytes
+
+tc 0 rate = 1250000000         ; Bytes per second
+tc 1 rate = 1250000000         ; Bytes per second
+tc 2 rate = 1250000000         ; Bytes per second
+tc 3 rate = 1250000000         ; Bytes per second
+tc period = 10                 ; Milliseconds
+
+pipe 0-4095 = 0                ; These pipes are configured with pipe profile 0
+
+; Pipe configuration
+[pipe profile 0]
+tb rate = 305175               ; Bytes per second
+tb size = 1000000              ; Bytes
+
+tc 0 rate = 305175             ; Bytes per second
+tc 1 rate = 305175             ; Bytes per second
+tc 2 rate = 305175             ; Bytes per second
+tc 3 rate = 305175             ; Bytes per second
+tc period = 40                 ; Milliseconds
+
+tc 3 oversubscription weight = 1
+
+tc 0 wrr weights = 1 1 1 1
+tc 1 wrr weights = 1 1 1 1
+tc 2 wrr weights = 1 1 1 1
+tc 3 wrr weights = 1 1 1 1
+
+; RED params per traffic class and color (Green / Yellow / Red)
+[red]
+tc 0 wred min = 48 40 32
+tc 0 wred max = 64 64 64
+tc 0 wred inv prob = 10 10 10
+tc 0 wred weight = 9 9 9
+
+tc 1 wred min = 48 40 32
+tc 1 wred max = 64 64 64
+tc 1 wred inv prob = 10 10 10
+tc 1 wred weight = 9 9 9
+
+tc 2 wred min = 48 40 32
+tc 2 wred max = 64 64 64
+tc 2 wred inv prob = 10 10 10
+tc 2 wred weight = 9 9 9
+
+tc 3 wred min = 48 40 32
+tc 3 wred max = 64 64 64
+tc 3 wred inv prob = 10 10 10
+tc 3 wred weight = 9 9 9