aboutsummaryrefslogtreecommitdiffstats
path: root/examples/kni
diff options
context:
space:
mode:
authorLuca Boccassi <luca.boccassi@gmail.com>2018-02-19 11:16:57 +0000
committerLuca Boccassi <luca.boccassi@gmail.com>2018-02-19 11:17:28 +0000
commitca33590b6af032bff57d9cc70455660466a654b2 (patch)
tree0b68b090bd9b4a78a3614b62400b29279d76d553 /examples/kni
parent169a9de21e263aa6599cdc2d87a45ae158d9f509 (diff)
New upstream version 18.02upstream/18.02
Change-Id: I89ed24cb2a49b78fe5be6970b99dd46c1499fcc3 Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
Diffstat (limited to 'examples/kni')
-rw-r--r--examples/kni/Makefile77
-rw-r--r--examples/kni/main.c125
-rw-r--r--examples/kni/meson.build12
3 files changed, 135 insertions, 79 deletions
diff --git a/examples/kni/Makefile b/examples/kni/Makefile
index 08a4f0c5..562dc274 100644
--- a/examples/kni/Makefile
+++ b/examples/kni/Makefile
@@ -1,33 +1,43 @@
-# BSD LICENSE
-#
-# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# * Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in
-# the documentation and/or other materials provided with the
-# distribution.
-# * Neither the name of Intel Corporation nor the names of its
-# contributors may be used to endorse or promote products derived
-# from this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2010-2014 Intel Corporation
+
+# binary name
+APP = kni
+
+# all source are stored in SRCS-y
+SRCS-y := main.c
+
+# Build using pkg-config variables if possible
+$(shell pkg-config --exists libdpdk)
+ifeq ($(.SHELLSTATUS),0)
+
+all: shared
+.PHONY: shared static
+shared: build/$(APP)-shared
+ ln -sf $(APP)-shared build/$(APP)
+static: build/$(APP)-static
+ ln -sf $(APP)-static build/$(APP)
+
+PC_FILE := $(shell pkg-config --path libdpdk)
+CFLAGS += -O3 $(shell pkg-config --cflags libdpdk)
+LDFLAGS_SHARED = $(shell pkg-config --libs libdpdk)
+LDFLAGS_STATIC = -Wl,-Bstatic $(shell pkg-config --static --libs libdpdk)
+
+build/$(APP)-shared: $(SRCS-y) Makefile $(PC_FILE) | build
+ $(CC) $(CFLAGS) $(SRCS-y) -o $@ $(LDFLAGS) $(LDFLAGS_SHARED)
+
+build/$(APP)-static: $(SRCS-y) Makefile $(PC_FILE) | build
+ $(CC) $(CFLAGS) $(SRCS-y) -o $@ $(LDFLAGS) $(LDFLAGS_STATIC)
+
+build:
+ @mkdir -p $@
+
+.PHONY: clean
+clean:
+ rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
+ rmdir --ignore-fail-on-non-empty build
+
+else # Build using legacy build system
ifeq ($(RTE_SDK),)
$(error "Please define RTE_SDK environment variable")
@@ -43,13 +53,8 @@ $(error This application can only operate in a linuxapp environment, \
please change the definition of the RTE_TARGET environment variable)
endif
-# binary name
-APP = kni
-
-# all source are stored in SRCS-y
-SRCS-y := main.c
-
CFLAGS += -O3
CFLAGS += $(WERROR_FLAGS)
include $(RTE_SDK)/mk/rte.extapp.mk
+endif
diff --git a/examples/kni/main.c b/examples/kni/main.c
index 3f173854..0d9980ee 100644
--- a/examples/kni/main.c
+++ b/examples/kni/main.c
@@ -1,34 +1,5 @@
-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2014 Intel Corporation
*/
#include <stdio.h>
@@ -90,10 +61,10 @@
#define MEMPOOL_CACHE_SZ PKT_BURST_SZ
/* Number of RX ring descriptors */
-#define NB_RXD 128
+#define NB_RXD 1024
/* Number of TX ring descriptors */
-#define NB_TXD 512
+#define NB_TXD 1024
/* Total octets in ethernet header */
#define KNI_ENET_HEADER_SIZE 14
@@ -124,11 +95,8 @@ static struct kni_port_params *kni_port_params_array[RTE_MAX_ETHPORTS];
/* Options for configuring ethernet port */
static struct rte_eth_conf port_conf = {
.rxmode = {
- .header_split = 0, /* Header Split disabled */
- .hw_ip_checksum = 0, /* IP checksum offload disabled */
- .hw_vlan_filter = 0, /* VLAN filtering disabled */
- .jumbo_frame = 0, /* Jumbo Frame Support disabled */
- .hw_strip_crc = 1, /* CRC stripped by hardware */
+ .ignore_offload_bitfield = 1,
+ .offloads = DEV_RX_OFFLOAD_CRC_STRIP,
},
.txmode = {
.mq_mode = ETH_MQ_TX_NONE,
@@ -163,6 +131,7 @@ static struct kni_interface_stats kni_stats[RTE_MAX_ETHPORTS];
static int kni_change_mtu(uint16_t port_id, unsigned int new_mtu);
static int kni_config_network_interface(uint16_t port_id, uint8_t if_up);
+static int kni_config_mac_address(uint16_t port_id, uint8_t mac_addr[]);
static rte_atomic32_t kni_stop = RTE_ATOMIC32_INIT(0);
@@ -607,11 +576,19 @@ init_port(uint16_t port)
int ret;
uint16_t nb_rxd = NB_RXD;
uint16_t nb_txd = NB_TXD;
+ struct rte_eth_dev_info dev_info;
+ struct rte_eth_rxconf rxq_conf;
+ struct rte_eth_txconf txq_conf;
+ struct rte_eth_conf local_port_conf = port_conf;
/* Initialise device and RX/TX queues */
RTE_LOG(INFO, APP, "Initialising port %u ...\n", (unsigned)port);
fflush(stdout);
- ret = rte_eth_dev_configure(port, 1, 1, &port_conf);
+ rte_eth_dev_info_get(port, &dev_info);
+ if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
+ local_port_conf.txmode.offloads |=
+ DEV_TX_OFFLOAD_MBUF_FAST_FREE;
+ ret = rte_eth_dev_configure(port, 1, 1, &local_port_conf);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Could not configure port%u (%d)\n",
(unsigned)port, ret);
@@ -621,14 +598,19 @@ init_port(uint16_t port)
rte_exit(EXIT_FAILURE, "Could not adjust number of descriptors "
"for port%u (%d)\n", (unsigned)port, ret);
+ rxq_conf = dev_info.default_rxconf;
+ rxq_conf.offloads = local_port_conf.rxmode.offloads;
ret = rte_eth_rx_queue_setup(port, 0, nb_rxd,
- rte_eth_dev_socket_id(port), NULL, pktmbuf_pool);
+ rte_eth_dev_socket_id(port), &rxq_conf, pktmbuf_pool);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Could not setup up RX queue for "
"port%u (%d)\n", (unsigned)port, ret);
+ txq_conf = dev_info.default_txconf;
+ txq_conf.txq_flags = ETH_TXQ_FLAGS_IGNORE;
+ txq_conf.offloads = local_port_conf.txmode.offloads;
ret = rte_eth_tx_queue_setup(port, 0, nb_txd,
- rte_eth_dev_socket_id(port), NULL);
+ rte_eth_dev_socket_id(port), &txq_conf);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Could not setup up TX queue for "
"port%u (%d)\n", (unsigned)port, ret);
@@ -702,7 +684,10 @@ static int
kni_change_mtu(uint16_t port_id, unsigned int new_mtu)
{
int ret;
+ uint16_t nb_rxd = NB_RXD;
struct rte_eth_conf conf;
+ struct rte_eth_dev_info dev_info;
+ struct rte_eth_rxconf rxq_conf;
if (port_id >= rte_eth_dev_count()) {
RTE_LOG(ERR, APP, "Invalid port id %d\n", port_id);
@@ -717,9 +702,9 @@ kni_change_mtu(uint16_t port_id, unsigned int new_mtu)
memcpy(&conf, &port_conf, sizeof(conf));
/* Set new MTU */
if (new_mtu > ETHER_MAX_LEN)
- conf.rxmode.jumbo_frame = 1;
+ conf.rxmode.offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
else
- conf.rxmode.jumbo_frame = 0;
+ conf.rxmode.offloads &= ~DEV_RX_OFFLOAD_JUMBO_FRAME;
/* mtu + length of header + length of FCS = max pkt length */
conf.rxmode.max_rx_pkt_len = new_mtu + KNI_ENET_HEADER_SIZE +
@@ -730,6 +715,23 @@ kni_change_mtu(uint16_t port_id, unsigned int new_mtu)
return ret;
}
+ ret = rte_eth_dev_adjust_nb_rx_tx_desc(port_id, &nb_rxd, NULL);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "Could not adjust number of descriptors "
+ "for port%u (%d)\n", (unsigned int)port_id,
+ ret);
+
+ rte_eth_dev_info_get(port_id, &dev_info);
+ rxq_conf = dev_info.default_rxconf;
+ rxq_conf.offloads = conf.rxmode.offloads;
+ ret = rte_eth_rx_queue_setup(port_id, 0, nb_rxd,
+ rte_eth_dev_socket_id(port_id), &rxq_conf, pktmbuf_pool);
+ if (ret < 0) {
+ RTE_LOG(ERR, APP, "Fail to setup Rx queue of port %d\n",
+ port_id);
+ return ret;
+ }
+
/* Restart specific port */
ret = rte_eth_dev_start(port_id);
if (ret < 0) {
@@ -766,6 +768,37 @@ kni_config_network_interface(uint16_t port_id, uint8_t if_up)
return ret;
}
+static void
+print_ethaddr(const char *name, struct ether_addr *mac_addr)
+{
+ char buf[ETHER_ADDR_FMT_SIZE];
+ ether_format_addr(buf, ETHER_ADDR_FMT_SIZE, mac_addr);
+ RTE_LOG(INFO, APP, "\t%s%s\n", name, buf);
+}
+
+/* Callback for request of configuring mac address */
+static int
+kni_config_mac_address(uint16_t port_id, uint8_t mac_addr[])
+{
+ int ret = 0;
+
+ if (port_id >= rte_eth_dev_count() || port_id >= RTE_MAX_ETHPORTS) {
+ RTE_LOG(ERR, APP, "Invalid port id %d\n", port_id);
+ return -EINVAL;
+ }
+
+ RTE_LOG(INFO, APP, "Configure mac address of %d\n", port_id);
+ print_ethaddr("Address:", (struct ether_addr *)mac_addr);
+
+ ret = rte_eth_dev_default_mac_addr_set(port_id,
+ (struct ether_addr *)mac_addr);
+ if (ret < 0)
+ RTE_LOG(ERR, APP, "Failed to config mac_addr for port %d\n",
+ port_id);
+
+ return ret;
+}
+
static int
kni_alloc(uint16_t port_id)
{
@@ -809,11 +842,17 @@ kni_alloc(uint16_t port_id)
conf.addr = dev_info.pci_dev->addr;
conf.id = dev_info.pci_dev->id;
}
+ /* Get the interface default mac address */
+ rte_eth_macaddr_get(port_id,
+ (struct ether_addr *)&conf.mac_addr);
+
+ rte_eth_dev_get_mtu(port_id, &conf.mtu);
memset(&ops, 0, sizeof(ops));
ops.port_id = port_id;
ops.change_mtu = kni_change_mtu;
ops.config_network_if = kni_config_network_interface;
+ ops.config_mac_address = kni_config_mac_address;
kni = rte_kni_alloc(pktmbuf_pool, &conf, &ops);
} else
diff --git a/examples/kni/meson.build b/examples/kni/meson.build
new file mode 100644
index 00000000..c39aead6
--- /dev/null
+++ b/examples/kni/meson.build
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2017 Intel Corporation
+
+# meson file, for building this example as part of a main DPDK build.
+#
+# To build this example as a standalone application with an already-installed
+# DPDK instance, use 'make'
+
+deps += ['kni', 'bus_pci']
+sources = files(
+ 'main.c'
+)