diff options
author | 2016-07-06 09:22:35 +0200 | |
---|---|---|
committer | 2016-07-06 16:15:13 +0200 | |
commit | 809f08006d56e7ba4ce190b0a63d44acf62d8044 (patch) | |
tree | d93fbe3244ee0cff16a6af830c7efb15c26e5ef4 /examples/vhost | |
parent | b8ce7c38b99df118002fb460e680fabf16944f6c (diff) |
Imported Upstream version 16.07-rc1
Change-Id: If3f757dc95532706b04053286c6b54492169f1a3
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Diffstat (limited to 'examples/vhost')
-rw-r--r-- | examples/vhost/main.c | 2370 | ||||
-rw-r--r-- | examples/vhost/main.h | 70 |
2 files changed, 384 insertions, 2056 deletions
diff --git a/examples/vhost/main.c b/examples/vhost/main.c index 28c17afd..3aff2cc8 100644 --- a/examples/vhost/main.c +++ b/examples/vhost/main.c @@ -1,7 +1,7 @@ /*- * BSD LICENSE * - * Copyright(c) 2010-2015 Intel Corporation. All rights reserved. + * Copyright(c) 2010-2016 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -62,26 +62,9 @@ /* the maximum number of external ports supported */ #define MAX_SUP_PORTS 1 -/* - * Calculate the number of buffers needed per port - */ -#define NUM_MBUFS_PER_PORT ((MAX_QUEUES*RTE_TEST_RX_DESC_DEFAULT) + \ - (num_switching_cores*MAX_PKT_BURST) + \ - (num_switching_cores*RTE_TEST_TX_DESC_DEFAULT) +\ - ((num_switching_cores+1)*MBUF_CACHE_SIZE)) - #define MBUF_CACHE_SIZE 128 #define MBUF_DATA_SIZE RTE_MBUF_DEFAULT_BUF_SIZE -/* - * No frame data buffer allocated from host are required for zero copy - * implementation, guest will allocate the frame data buffer, and vhost - * directly use it. - */ -#define VIRTIO_DESCRIPTOR_LEN_ZCP RTE_MBUF_DEFAULT_DATAROOM -#define MBUF_DATA_SIZE_ZCP RTE_MBUF_DEFAULT_BUF_SIZE -#define MBUF_CACHE_SIZE_ZCP 0 - #define MAX_PKT_BURST 32 /* Max burst size for RX/TX */ #define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */ @@ -95,33 +78,10 @@ #define DEVICE_RX 1 #define DEVICE_SAFE_REMOVE 2 -/* Config_core_flag status definitions. */ -#define REQUEST_DEV_REMOVAL 1 -#define ACK_DEV_REMOVAL 0 - /* Configurable number of RX/TX ring descriptors */ #define RTE_TEST_RX_DESC_DEFAULT 1024 #define RTE_TEST_TX_DESC_DEFAULT 512 -/* - * Need refine these 2 macros for legacy and DPDK based front end: - * Max vring avail descriptor/entries from guest - MAX_PKT_BURST - * And then adjust power 2. - */ -/* - * For legacy front end, 128 descriptors, - * half for virtio header, another half for mbuf. - */ -#define RTE_TEST_RX_DESC_DEFAULT_ZCP 32 /* legacy: 32, DPDK virt FE: 128. */ -#define RTE_TEST_TX_DESC_DEFAULT_ZCP 64 /* legacy: 64, DPDK virt FE: 64. */ - -/* Get first 4 bytes in mbuf headroom. */ -#define MBUF_HEADROOM_UINT32(mbuf) (*(uint32_t *)((uint8_t *)(mbuf) \ - + sizeof(struct rte_mbuf))) - -/* true if x is a power of 2 */ -#define POWEROF2(x) ((((x)-1) & (x)) == 0) - #define INVALID_PORT_ID 0xFF /* Max number of devices. Limited by vmdq. */ @@ -136,50 +96,22 @@ /* Maximum long option length for option parsing. */ #define MAX_LONG_OPT_SZ 64 -/* Used to compare MAC addresses. */ -#define MAC_ADDR_CMP 0xFFFFFFFFFFFFULL - -/* Number of descriptors per cacheline. */ -#define DESC_PER_CACHELINE (RTE_CACHE_LINE_SIZE / sizeof(struct vring_desc)) - -#define MBUF_EXT_MEM(mb) (rte_mbuf_from_indirect(mb) != (mb)) - /* mask of enabled ports */ static uint32_t enabled_port_mask = 0; /* Promiscuous mode */ static uint32_t promiscuous; -/*Number of switching cores enabled*/ -static uint32_t num_switching_cores = 0; - /* number of devices/queues to support*/ static uint32_t num_queues = 0; static uint32_t num_devices; -/* - * Enable zero copy, pkts buffer will directly dma to hw descriptor, - * disabled on default. - */ -static uint32_t zero_copy; +static struct rte_mempool *mbuf_pool; static int mergeable; /* Do vlan strip on host, enabled on default */ static uint32_t vlan_strip = 1; -/* number of descriptors to apply*/ -static uint32_t num_rx_descriptor = RTE_TEST_RX_DESC_DEFAULT_ZCP; -static uint32_t num_tx_descriptor = RTE_TEST_TX_DESC_DEFAULT_ZCP; - -/* max ring descriptor, ixgbe, i40e, e1000 all are 4096. */ -#define MAX_RING_DESC 4096 - -struct vpool { - struct rte_mempool *pool; - struct rte_ring *ring; - uint32_t buf_size; -} vpool_array[MAX_QUEUES+MAX_QUEUES]; - /* Enable VM2VM communications. If this is disabled then the MAC address compare is skipped. */ typedef enum { VM2VM_DISABLED = 0, @@ -189,14 +121,6 @@ typedef enum { } vm2vm_type; static vm2vm_type vm2vm_mode = VM2VM_SOFTWARE; -/* The type of host physical address translated from guest physical address. */ -typedef enum { - PHYS_ADDR_CONTINUOUS = 0, - PHYS_ADDR_CROSS_SUBREG = 1, - PHYS_ADDR_INVALID = 2, - PHYS_ADDR_LAST -} hpa_type; - /* Enable stats. */ static uint32_t enable_stats = 0; /* Enable retries on RX. */ @@ -208,6 +132,8 @@ static uint32_t enable_tx_csum; /* Disable TSO offload */ static uint32_t enable_tso; +static int client_mode; + /* Specify timeout (in useconds) between retries on RX. */ static uint32_t burst_rx_delay_time = BURST_RX_WAIT_US; /* Specify the number of retries on RX. */ @@ -259,7 +185,6 @@ static uint16_t num_pf_queues, num_vmdq_queues; static uint16_t vmdq_pool_base, vmdq_queue_base; static uint16_t queues_per_pool; -static const uint16_t external_pkt_default_vlan_tag = 2000; const uint16_t vlan_tags[] = { 1000, 1001, 1002, 1003, 1004, 1005, 1006, 1007, 1008, 1009, 1010, 1011, 1012, 1013, 1014, 1015, @@ -274,11 +199,9 @@ const uint16_t vlan_tags[] = { /* ethernet addresses of ports */ static struct ether_addr vmdq_ports_eth_addr[RTE_MAX_ETHPORTS]; -/* heads for the main used and free linked lists for the data path. */ -static struct virtio_net_data_ll *ll_root_used = NULL; -static struct virtio_net_data_ll *ll_root_free = NULL; +static struct vhost_dev_tailq_list vhost_dev_list = + TAILQ_HEAD_INITIALIZER(vhost_dev_list); -/* Array of data core structures containing information on individual core linked lists. */ static struct lcore_info lcore_info[RTE_MAX_LCORE]; /* Used for queueing bursts of TX packets. */ @@ -291,32 +214,9 @@ struct mbuf_table { /* TX queue for each data core. */ struct mbuf_table lcore_tx_queue[RTE_MAX_LCORE]; -/* TX queue fori each virtio device for zero copy. */ -struct mbuf_table tx_queue_zcp[MAX_QUEUES]; - -/* Vlan header struct used to insert vlan tags on TX. */ -struct vlan_ethhdr { - unsigned char h_dest[ETH_ALEN]; - unsigned char h_source[ETH_ALEN]; - __be16 h_vlan_proto; - __be16 h_vlan_TCI; - __be16 h_vlan_encapsulated_proto; -}; - -/* Header lengths. */ +#define MBUF_TABLE_DRAIN_TSC ((rte_get_tsc_hz() + US_PER_S - 1) \ + / US_PER_S * BURST_TX_DRAIN_US) #define VLAN_HLEN 4 -#define VLAN_ETH_HLEN 18 - -/* Per-device statistics struct */ -struct device_statistics { - uint64_t tx_total; - rte_atomic64_t rx_total_atomic; - uint64_t rx_total; - uint64_t tx; - rte_atomic64_t rx_atomic; - uint64_t rx; -} __rte_cache_aligned; -struct device_statistics dev_statistics[MAX_DEVICES]; /* * Builds up the correct configuration for VMDQ VLAN pool map @@ -394,29 +294,12 @@ port_init(uint8_t port) /* Enable vlan offload */ txconf->txq_flags &= ~ETH_TXQ_FLAGS_NOVLANOFFL; - /* - * Zero copy defers queue RX/TX start to the time when guest - * finishes its startup and packet buffers from that guest are - * available. - */ - if (zero_copy) { - rxconf->rx_deferred_start = 1; - rxconf->rx_drop_en = 0; - txconf->tx_deferred_start = 1; - } - /*configure the number of supported virtio devices based on VMDQ limits */ num_devices = dev_info.max_vmdq_pools; - if (zero_copy) { - rx_ring_size = num_rx_descriptor; - tx_ring_size = num_tx_descriptor; - tx_rings = dev_info.max_tx_queues; - } else { - rx_ring_size = RTE_TEST_RX_DESC_DEFAULT; - tx_ring_size = RTE_TEST_TX_DESC_DEFAULT; - tx_rings = (uint16_t)rte_lcore_count(); - } + rx_ring_size = RTE_TEST_RX_DESC_DEFAULT; + tx_ring_size = RTE_TEST_TX_DESC_DEFAULT; + tx_rings = (uint16_t)rte_lcore_count(); retval = validate_num_devices(MAX_DEVICES); if (retval < 0) @@ -457,7 +340,7 @@ port_init(uint8_t port) retval = rte_eth_rx_queue_setup(port, q, rx_ring_size, rte_eth_dev_socket_id(port), rxconf, - vpool_array[q].pool); + mbuf_pool); if (retval < 0) return retval; } @@ -576,14 +459,9 @@ us_vhost_usage(const char *prgname) " --vlan-strip [0|1]: disable/enable(default) RX VLAN strip on host\n" " --stats [0-N]: 0: Disable stats, N: Time in seconds to print stats\n" " --dev-basename: The basename to be used for the character device.\n" - " --zero-copy [0|1]: disable(default)/enable rx/tx " - "zero copy\n" - " --rx-desc-num [0-N]: the number of descriptors on rx, " - "used only when zero copy is enabled.\n" - " --tx-desc-num [0-N]: the number of descriptors on tx, " - "used only when zero copy is enabled.\n" " --tx-csum [0|1] disable/enable TX checksum offload.\n" - " --tso [0|1] disable/enable TCP segment offload.\n", + " --tso [0|1] disable/enable TCP segment offload.\n" + " --client register a vhost-user socket as client mode.\n", prgname); } @@ -606,11 +484,9 @@ us_vhost_parse_args(int argc, char **argv) {"vlan-strip", required_argument, NULL, 0}, {"stats", required_argument, NULL, 0}, {"dev-basename", required_argument, NULL, 0}, - {"zero-copy", required_argument, NULL, 0}, - {"rx-desc-num", required_argument, NULL, 0}, - {"tx-desc-num", required_argument, NULL, 0}, {"tx-csum", required_argument, NULL, 0}, {"tso", required_argument, NULL, 0}, + {"client", no_argument, &client_mode, 1}, {NULL, 0, 0, 0}, }; @@ -765,50 +641,6 @@ us_vhost_parse_args(int argc, char **argv) } } - /* Enable/disable rx/tx zero copy. */ - if (!strncmp(long_option[option_index].name, - "zero-copy", MAX_LONG_OPT_SZ)) { - ret = parse_num_opt(optarg, 1); - if (ret == -1) { - RTE_LOG(INFO, VHOST_CONFIG, - "Invalid argument" - " for zero-copy [0|1]\n"); - us_vhost_usage(prgname); - return -1; - } else - zero_copy = ret; - } - - /* Specify the descriptor number on RX. */ - if (!strncmp(long_option[option_index].name, - "rx-desc-num", MAX_LONG_OPT_SZ)) { - ret = parse_num_opt(optarg, MAX_RING_DESC); - if ((ret == -1) || (!POWEROF2(ret))) { - RTE_LOG(INFO, VHOST_CONFIG, - "Invalid argument for rx-desc-num[0-N]," - "power of 2 required.\n"); - us_vhost_usage(prgname); - return -1; - } else { - num_rx_descriptor = ret; - } - } - - /* Specify the descriptor number on TX. */ - if (!strncmp(long_option[option_index].name, - "tx-desc-num", MAX_LONG_OPT_SZ)) { - ret = parse_num_opt(optarg, MAX_RING_DESC); - if ((ret == -1) || (!POWEROF2(ret))) { - RTE_LOG(INFO, VHOST_CONFIG, - "Invalid argument for tx-desc-num [0-N]," - "power of 2 required.\n"); - us_vhost_usage(prgname); - return -1; - } else { - num_tx_descriptor = ret; - } - } - break; /* Invalid option - print options. */ @@ -829,21 +661,6 @@ us_vhost_parse_args(int argc, char **argv) return -1; } - if ((zero_copy == 1) && (vm2vm_mode == VM2VM_SOFTWARE)) { - RTE_LOG(INFO, VHOST_PORT, - "Vhost zero copy doesn't support software vm2vm," - "please specify 'vm2vm 2' to use hardware vm2vm.\n"); - return -1; - } - - if ((zero_copy == 1) && (vmdq_conf_default.rxmode.jumbo_frame == 1)) { - RTE_LOG(INFO, VHOST_PORT, - "Vhost zero copy doesn't support jumbo frame," - "please specify '--mergeable 0' to disable the " - "mergeable feature.\n"); - return -1; - } - return 0; } @@ -873,74 +690,18 @@ static unsigned check_ports_num(unsigned nb_ports) return valid_num_ports; } -/* - * Macro to print out packet contents. Wrapped in debug define so that the - * data path is not effected when debug is disabled. - */ -#ifdef DEBUG -#define PRINT_PACKET(device, addr, size, header) do { \ - char *pkt_addr = (char*)(addr); \ - unsigned int index; \ - char packet[MAX_PRINT_BUFF]; \ - \ - if ((header)) \ - snprintf(packet, MAX_PRINT_BUFF, "(%"PRIu64") Header size %d: ", (device->device_fh), (size)); \ - else \ - snprintf(packet, MAX_PRINT_BUFF, "(%"PRIu64") Packet size %d: ", (device->device_fh), (size)); \ - for (index = 0; index < (size); index++) { \ - snprintf(packet + strnlen(packet, MAX_PRINT_BUFF), MAX_PRINT_BUFF - strnlen(packet, MAX_PRINT_BUFF), \ - "%02hhx ", pkt_addr[index]); \ - } \ - snprintf(packet + strnlen(packet, MAX_PRINT_BUFF), MAX_PRINT_BUFF - strnlen(packet, MAX_PRINT_BUFF), "\n"); \ - \ - LOG_DEBUG(VHOST_DATA, "%s", packet); \ -} while(0) -#else -#define PRINT_PACKET(device, addr, size, header) do{} while(0) -#endif - -/* - * Function to convert guest physical addresses to vhost physical addresses. - * This is used to convert virtio buffer addresses. - */ -static inline uint64_t __attribute__((always_inline)) -gpa_to_hpa(struct vhost_dev *vdev, uint64_t guest_pa, - uint32_t buf_len, hpa_type *addr_type) +static inline struct vhost_dev *__attribute__((always_inline)) +find_vhost_dev(struct ether_addr *mac) { - struct virtio_memory_regions_hpa *region; - uint32_t regionidx; - uint64_t vhost_pa = 0; - - *addr_type = PHYS_ADDR_INVALID; - - for (regionidx = 0; regionidx < vdev->nregions_hpa; regionidx++) { - region = &vdev->regions_hpa[regionidx]; - if ((guest_pa >= region->guest_phys_address) && - (guest_pa <= region->guest_phys_address_end)) { - vhost_pa = region->host_phys_addr_offset + guest_pa; - if (likely((guest_pa + buf_len - 1) - <= region->guest_phys_address_end)) - *addr_type = PHYS_ADDR_CONTINUOUS; - else - *addr_type = PHYS_ADDR_CROSS_SUBREG; - break; - } - } - - LOG_DEBUG(VHOST_DATA, "(%"PRIu64") GPA %p| HPA %p\n", - vdev->dev->device_fh, (void *)(uintptr_t)guest_pa, - (void *)(uintptr_t)vhost_pa); + struct vhost_dev *vdev; - return vhost_pa; -} + TAILQ_FOREACH(vdev, &vhost_dev_list, global_vdev_entry) { + if (vdev->ready == DEVICE_RX && + is_same_ether_addr(mac, &vdev->mac_address)) + return vdev; + } -/* - * Compares a packet destination MAC address to a device MAC address. - */ -static inline int __attribute__((always_inline)) -ether_addr_cmp(struct ether_addr *ea, struct ether_addr *eb) -{ - return ((*(uint64_t *)ea ^ *(uint64_t *)eb) & MAC_ADDR_CMP) == 0; + return NULL; } /* @@ -951,32 +712,28 @@ static int link_vmdq(struct vhost_dev *vdev, struct rte_mbuf *m) { struct ether_hdr *pkt_hdr; - struct virtio_net_data_ll *dev_ll; - struct virtio_net *dev = vdev->dev; int i, ret; /* Learn MAC address of guest device from packet */ pkt_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *); - dev_ll = ll_root_used; - - while (dev_ll != NULL) { - if (ether_addr_cmp(&(pkt_hdr->s_addr), &dev_ll->vdev->mac_address)) { - RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") WARNING: This device is using an existing MAC address and has not been registered.\n", dev->device_fh); - return -1; - } - dev_ll = dev_ll->next; + if (find_vhost_dev(&pkt_hdr->s_addr)) { + RTE_LOG(ERR, VHOST_DATA, + "(%d) device is using a registered MAC!\n", + vdev->vid); + return -1; } for (i = 0; i < ETHER_ADDR_LEN; i++) vdev->mac_address.addr_bytes[i] = pkt_hdr->s_addr.addr_bytes[i]; /* vlan_tag currently uses the device_id. */ - vdev->vlan_tag = vlan_tags[dev->device_fh]; + vdev->vlan_tag = vlan_tags[vdev->vid]; /* Print out VMDQ registration info. */ - RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") MAC_ADDRESS %02x:%02x:%02x:%02x:%02x:%02x and VLAN_TAG %d registered\n", - dev->device_fh, + RTE_LOG(INFO, VHOST_DATA, + "(%d) mac %02x:%02x:%02x:%02x:%02x:%02x and vlan %d registered\n", + vdev->vid, vdev->mac_address.addr_bytes[0], vdev->mac_address.addr_bytes[1], vdev->mac_address.addr_bytes[2], vdev->mac_address.addr_bytes[3], vdev->mac_address.addr_bytes[4], vdev->mac_address.addr_bytes[5], @@ -984,10 +741,11 @@ link_vmdq(struct vhost_dev *vdev, struct rte_mbuf *m) /* Register the MAC address. */ ret = rte_eth_dev_mac_addr_add(ports[0], &vdev->mac_address, - (uint32_t)dev->device_fh + vmdq_pool_base); + (uint32_t)vdev->vid + vmdq_pool_base); if (ret) - RTE_LOG(ERR, VHOST_DATA, "(%"PRIu64") Failed to add device MAC address to VMDQ\n", - dev->device_fh); + RTE_LOG(ERR, VHOST_DATA, + "(%d) failed to add device MAC address to VMDQ\n", + vdev->vid); /* Enable stripping of the vlan tag as we handle routing. */ if (vlan_strip) @@ -1035,6 +793,21 @@ unlink_vmdq(struct vhost_dev *vdev) } } +static inline void __attribute__((always_inline)) +virtio_xmit(struct vhost_dev *dst_vdev, struct vhost_dev *src_vdev, + struct rte_mbuf *m) +{ + uint16_t ret; + + ret = rte_vhost_enqueue_burst(dst_vdev->vid, VIRTIO_RXQ, &m, 1); + if (enable_stats) { + rte_atomic64_inc(&dst_vdev->stats.rx_total_atomic); + rte_atomic64_add(&dst_vdev->stats.rx_atomic, ret); + src_vdev->stats.tx_total++; + src_vdev->stats.tx += ret; + } +} + /* * Check if the packet destination MAC address is for a local device. If so then put * the packet on that devices RX queue. If not then return. @@ -1042,56 +815,33 @@ unlink_vmdq(struct vhost_dev *vdev) static inline int __attribute__((always_inline)) virtio_tx_local(struct vhost_dev *vdev, struct rte_mbuf *m) { - struct virtio_net_data_ll *dev_ll; struct ether_hdr *pkt_hdr; - uint64_t ret = 0; - struct virtio_net *dev = vdev->dev; - struct virtio_net *tdev; /* destination virito device */ + struct vhost_dev *dst_vdev; pkt_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *); - /*get the used devices list*/ - dev_ll = ll_root_used; + dst_vdev = find_vhost_dev(&pkt_hdr->d_addr); + if (!dst_vdev) + return -1; - while (dev_ll != NULL) { - if ((dev_ll->vdev->ready == DEVICE_RX) && ether_addr_cmp(&(pkt_hdr->d_addr), - &dev_ll->vdev->mac_address)) { + if (vdev->vid == dst_vdev->vid) { + RTE_LOG(DEBUG, VHOST_DATA, + "(%d) TX: src and dst MAC is same. Dropping packet.\n", + vdev->vid); + return 0; + } - /* Drop the packet if the TX packet is destined for the TX device. */ - if (dev_ll->vdev->dev->device_fh == dev->device_fh) { - LOG_DEBUG(VHOST_DATA, "(%"PRIu64") TX: Source and destination MAC addresses are the same. Dropping packet.\n", - dev->device_fh); - return 0; - } - tdev = dev_ll->vdev->dev; - - - LOG_DEBUG(VHOST_DATA, "(%"PRIu64") TX: MAC address is local\n", tdev->device_fh); - - if (unlikely(dev_ll->vdev->remove)) { - /*drop the packet if the device is marked for removal*/ - LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Device is marked for removal\n", tdev->device_fh); - } else { - /*send the packet to the local virtio device*/ - ret = rte_vhost_enqueue_burst(tdev, VIRTIO_RXQ, &m, 1); - if (enable_stats) { - rte_atomic64_add( - &dev_statistics[tdev->device_fh].rx_total_atomic, - 1); - rte_atomic64_add( - &dev_statistics[tdev->device_fh].rx_atomic, - ret); - dev_statistics[dev->device_fh].tx_total++; - dev_statistics[dev->device_fh].tx += ret; - } - } + RTE_LOG(DEBUG, VHOST_DATA, + "(%d) TX: MAC address is local\n", dst_vdev->vid); - return 0; - } - dev_ll = dev_ll->next; + if (unlikely(dst_vdev->remove)) { + RTE_LOG(DEBUG, VHOST_DATA, + "(%d) device is marked for removal\n", dst_vdev->vid); + return 0; } - return -1; + virtio_xmit(dst_vdev, vdev, m); + return 0; } /* @@ -1099,49 +849,35 @@ virtio_tx_local(struct vhost_dev *vdev, struct rte_mbuf *m) * and get its vlan tag, and offset if it is. */ static inline int __attribute__((always_inline)) -find_local_dest(struct virtio_net *dev, struct rte_mbuf *m, +find_local_dest(struct vhost_dev *vdev, struct rte_mbuf *m, uint32_t *offset, uint16_t *vlan_tag) { - struct virtio_net_data_ll *dev_ll = ll_root_used; + struct vhost_dev *dst_vdev; struct ether_hdr *pkt_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *); - while (dev_ll != NULL) { - if ((dev_ll->vdev->ready == DEVICE_RX) - && ether_addr_cmp(&(pkt_hdr->d_addr), - &dev_ll->vdev->mac_address)) { - /* - * Drop the packet if the TX packet is - * destined for the TX device. - */ - if (dev_ll->vdev->dev->device_fh == dev->device_fh) { - LOG_DEBUG(VHOST_DATA, - "(%"PRIu64") TX: Source and destination" - " MAC addresses are the same. Dropping " - "packet.\n", - dev_ll->vdev->dev->device_fh); - return -1; - } - - /* - * HW vlan strip will reduce the packet length - * by minus length of vlan tag, so need restore - * the packet length by plus it. - */ - *offset = VLAN_HLEN; - *vlan_tag = - (uint16_t) - vlan_tags[(uint16_t)dev_ll->vdev->dev->device_fh]; - - LOG_DEBUG(VHOST_DATA, - "(%"PRIu64") TX: pkt to local VM device id:" - "(%"PRIu64") vlan tag: %d.\n", - dev->device_fh, dev_ll->vdev->dev->device_fh, - (int)*vlan_tag); + dst_vdev = find_vhost_dev(&pkt_hdr->d_addr); + if (!dst_vdev) + return 0; - break; - } - dev_ll = dev_ll->next; + if (vdev->vid == dst_vdev->vid) { + RTE_LOG(DEBUG, VHOST_DATA, + "(%d) TX: src and dst MAC is same. Dropping packet.\n", + vdev->vid); + return -1; } + + /* + * HW vlan strip will reduce the packet length + * by minus length of vlan tag, so need restore + * the packet length by plus it. + */ + *offset = VLAN_HLEN; + *vlan_tag = vlan_tags[vdev->vid]; + + RTE_LOG(DEBUG, VHOST_DATA, + "(%d) TX: pkt to local VM device id: (%d), vlan tag: %u.\n", + vdev->vid, dst_vdev->vid, *vlan_tag); + return 0; } @@ -1173,20 +909,49 @@ static void virtio_tx_offload(struct rte_mbuf *m) tcp_hdr->cksum = get_psd_sum(l3_hdr, m->ol_flags); } +static inline void +free_pkts(struct rte_mbuf **pkts, uint16_t n) +{ + while (n--) + rte_pktmbuf_free(pkts[n]); +} + +static inline void __attribute__((always_inline)) +do_drain_mbuf_table(struct mbuf_table *tx_q) +{ + uint16_t count; + + count = rte_eth_tx_burst(ports[0], tx_q->txq_id, + tx_q->m_table, tx_q->len); + if (unlikely(count < tx_q->len)) + free_pkts(&tx_q->m_table[count], tx_q->len - count); + + tx_q->len = 0; +} + /* - * This function routes the TX packet to the correct interface. This may be a local device - * or the physical port. + * This function routes the TX packet to the correct interface. This + * may be a local device or the physical port. */ static inline void __attribute__((always_inline)) virtio_tx_route(struct vhost_dev *vdev, struct rte_mbuf *m, uint16_t vlan_tag) { struct mbuf_table *tx_q; - struct rte_mbuf **m_table; - unsigned len, ret, offset = 0; + unsigned offset = 0; const uint16_t lcore_id = rte_lcore_id(); - struct virtio_net *dev = vdev->dev; struct ether_hdr *nh; + + nh = rte_pktmbuf_mtod(m, struct ether_hdr *); + if (unlikely(is_broadcast_ether_addr(&nh->d_addr))) { + struct vhost_dev *vdev2; + + TAILQ_FOREACH(vdev2, &vhost_dev_list, global_vdev_entry) { + virtio_xmit(vdev2, vdev, m); + } + goto queue2nic; + } + /*check if destination is local VM*/ if ((vm2vm_mode == VM2VM_SOFTWARE) && (virtio_tx_local(vdev, m) == 0)) { rte_pktmbuf_free(m); @@ -1194,17 +959,20 @@ virtio_tx_route(struct vhost_dev *vdev, struct rte_mbuf *m, uint16_t vlan_tag) } if (unlikely(vm2vm_mode == VM2VM_HARDWARE)) { - if (unlikely(find_local_dest(dev, m, &offset, &vlan_tag) != 0)) { + if (unlikely(find_local_dest(vdev, m, &offset, + &vlan_tag) != 0)) { rte_pktmbuf_free(m); return; } } - LOG_DEBUG(VHOST_DATA, "(%"PRIu64") TX: MAC address is external\n", dev->device_fh); + RTE_LOG(DEBUG, VHOST_DATA, + "(%d) TX: MAC address is external\n", vdev->vid); + +queue2nic: /*Add packet to the port tx queue*/ tx_q = &lcore_tx_queue[lcore_id]; - len = tx_q->len; nh = rte_pktmbuf_mtod(m, struct ether_hdr *); if (unlikely(nh->ether_type == rte_cpu_to_be_16(ETHER_TYPE_VLAN))) { @@ -1242,1411 +1010,213 @@ virtio_tx_route(struct vhost_dev *vdev, struct rte_mbuf *m, uint16_t vlan_tag) if (m->ol_flags & PKT_TX_TCP_SEG) virtio_tx_offload(m); - tx_q->m_table[len] = m; - len++; + tx_q->m_table[tx_q->len++] = m; if (enable_stats) { - dev_statistics[dev->device_fh].tx_total++; - dev_statistics[dev->device_fh].tx++; - } - - if (unlikely(len == MAX_PKT_BURST)) { - m_table = (struct rte_mbuf **)tx_q->m_table; - ret = rte_eth_tx_burst(ports[0], (uint16_t)tx_q->txq_id, m_table, (uint16_t) len); - /* Free any buffers not handled by TX and update the port stats. */ - if (unlikely(ret < len)) { - do { - rte_pktmbuf_free(m_table[ret]); - } while (++ret < len); - } - - len = 0; + vdev->stats.tx_total++; + vdev->stats.tx++; } - tx_q->len = len; - return; + if (unlikely(tx_q->len == MAX_PKT_BURST)) + do_drain_mbuf_table(tx_q); } -/* - * This function is called by each data core. It handles all RX/TX registered with the - * core. For TX the specific lcore linked list is used. For RX, MAC addresses are compared - * with all devices in the main linked list. - */ -static int -switch_worker(__attribute__((unused)) void *arg) -{ - struct rte_mempool *mbuf_pool = arg; - struct virtio_net *dev = NULL; - struct vhost_dev *vdev = NULL; - struct rte_mbuf *pkts_burst[MAX_PKT_BURST]; - struct virtio_net_data_ll *dev_ll; - struct mbuf_table *tx_q; - volatile struct lcore_ll_info *lcore_ll; - const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) / US_PER_S * BURST_TX_DRAIN_US; - uint64_t prev_tsc, diff_tsc, cur_tsc, ret_count = 0; - unsigned ret, i; - const uint16_t lcore_id = rte_lcore_id(); - const uint16_t num_cores = (uint16_t)rte_lcore_count(); - uint16_t rx_count = 0; - uint16_t tx_count; - uint32_t retry = 0; - - RTE_LOG(INFO, VHOST_DATA, "Procesing on Core %u started\n", lcore_id); - lcore_ll = lcore_info[lcore_id].lcore_ll; - prev_tsc = 0; - - tx_q = &lcore_tx_queue[lcore_id]; - for (i = 0; i < num_cores; i ++) { - if (lcore_ids[i] == lcore_id) { - tx_q->txq_id = i; - break; - } - } - - while(1) { - cur_tsc = rte_rdtsc(); - /* - * TX burst queue drain - */ - diff_tsc = cur_tsc - prev_tsc; - if (unlikely(diff_tsc > drain_tsc)) { - - if (tx_q->len) { - LOG_DEBUG(VHOST_DATA, "TX queue drained after timeout with burst size %u \n", tx_q->len); - - /*Tx any packets in the queue*/ - ret = rte_eth_tx_burst(ports[0], (uint16_t)tx_q->txq_id, - (struct rte_mbuf **)tx_q->m_table, - (uint16_t)tx_q->len); - if (unlikely(ret < tx_q->len)) { - do { - rte_pktmbuf_free(tx_q->m_table[ret]); - } while (++ret < tx_q->len); - } - - tx_q->len = 0; - } - prev_tsc = cur_tsc; - } - - rte_prefetch0(lcore_ll->ll_root_used); - /* - * Inform the configuration core that we have exited the linked list and that no devices are - * in use if requested. - */ - if (lcore_ll->dev_removal_flag == REQUEST_DEV_REMOVAL) - lcore_ll->dev_removal_flag = ACK_DEV_REMOVAL; - - /* - * Process devices - */ - dev_ll = lcore_ll->ll_root_used; - - while (dev_ll != NULL) { - /*get virtio device ID*/ - vdev = dev_ll->vdev; - dev = vdev->dev; - - if (unlikely(vdev->remove)) { - dev_ll = dev_ll->next; - unlink_vmdq(vdev); - vdev->ready = DEVICE_SAFE_REMOVE; - continue; - } - if (likely(vdev->ready == DEVICE_RX)) { - /*Handle guest RX*/ - rx_count = rte_eth_rx_burst(ports[0], - vdev->vmdq_rx_q, pkts_burst, MAX_PKT_BURST); - - if (rx_count) { - /* - * Retry is enabled and the queue is full then we wait and retry to avoid packet loss - * Here MAX_PKT_BURST must be less than virtio queue size - */ - if (enable_retry && unlikely(rx_count > rte_vring_available_entries(dev, VIRTIO_RXQ))) { - for (retry = 0; retry < burst_rx_retry_num; retry++) { - rte_delay_us(burst_rx_delay_time); - if (rx_count <= rte_vring_available_entries(dev, VIRTIO_RXQ)) - break; - } - } - ret_count = rte_vhost_enqueue_burst(dev, VIRTIO_RXQ, pkts_burst, rx_count); - if (enable_stats) { - rte_atomic64_add( - &dev_statistics[dev_ll->vdev->dev->device_fh].rx_total_atomic, - rx_count); - rte_atomic64_add( - &dev_statistics[dev_ll->vdev->dev->device_fh].rx_atomic, ret_count); - } - while (likely(rx_count)) { - rx_count--; - rte_pktmbuf_free(pkts_burst[rx_count]); - } +static inline void __attribute__((always_inline)) +drain_mbuf_table(struct mbuf_table *tx_q) +{ + static uint64_t prev_tsc; + uint64_t cur_tsc; - } - } + if (tx_q->len == 0) + return; - if (likely(!vdev->remove)) { - /* Handle guest TX*/ - tx_count = rte_vhost_dequeue_burst(dev, VIRTIO_TXQ, mbuf_pool, pkts_burst, MAX_PKT_BURST); - /* If this is the first received packet we need to learn the MAC and setup VMDQ */ - if (unlikely(vdev->ready == DEVICE_MAC_LEARNING) && tx_count) { - if (vdev->remove || (link_vmdq(vdev, pkts_burst[0]) == -1)) { - while (tx_count) - rte_pktmbuf_free(pkts_burst[--tx_count]); - } - } - for (i = 0; i < tx_count; ++i) { - virtio_tx_route(vdev, pkts_burst[i], - vlan_tags[(uint16_t)dev->device_fh]); - } - } + cur_tsc = rte_rdtsc(); + if (unlikely(cur_tsc - prev_tsc > MBUF_TABLE_DRAIN_TSC)) { + prev_tsc = cur_tsc; - /*move to the next device in the list*/ - dev_ll = dev_ll->next; - } + RTE_LOG(DEBUG, VHOST_DATA, + "TX queue drained after timeout with burst size %u\n", + tx_q->len); + do_drain_mbuf_table(tx_q); } - - return 0; } -/* - * This function gets available ring number for zero copy rx. - * Only one thread will call this funciton for a paticular virtio device, - * so, it is designed as non-thread-safe function. - */ -static inline uint32_t __attribute__((always_inline)) -get_available_ring_num_zcp(struct virtio_net *dev) -{ - struct vhost_virtqueue *vq = dev->virtqueue[VIRTIO_RXQ]; - uint16_t avail_idx; - - avail_idx = *((volatile uint16_t *)&vq->avail->idx); - return (uint32_t)(avail_idx - vq->last_used_idx_res); -} - -/* - * This function gets available ring index for zero copy rx, - * it will retry 'burst_rx_retry_num' times till it get enough ring index. - * Only one thread will call this funciton for a paticular virtio device, - * so, it is designed as non-thread-safe function. - */ -static inline uint32_t __attribute__((always_inline)) -get_available_ring_index_zcp(struct virtio_net *dev, - uint16_t *res_base_idx, uint32_t count) +static inline void __attribute__((always_inline)) +drain_eth_rx(struct vhost_dev *vdev) { - struct vhost_virtqueue *vq = dev->virtqueue[VIRTIO_RXQ]; - uint16_t avail_idx; - uint32_t retry = 0; - uint16_t free_entries; - - *res_base_idx = vq->last_used_idx_res; - avail_idx = *((volatile uint16_t *)&vq->avail->idx); - free_entries = (avail_idx - *res_base_idx); + uint16_t rx_count, enqueue_count; + struct rte_mbuf *pkts[MAX_PKT_BURST]; - LOG_DEBUG(VHOST_DATA, "(%"PRIu64") in get_available_ring_index_zcp: " - "avail idx: %d, " - "res base idx:%d, free entries:%d\n", - dev->device_fh, avail_idx, *res_base_idx, - free_entries); + rx_count = rte_eth_rx_burst(ports[0], vdev->vmdq_rx_q, + pkts, MAX_PKT_BURST); + if (!rx_count) + return; /* - * If retry is enabled and the queue is full then we wait - * and retry to avoid packet loss. + * When "enable_retry" is set, here we wait and retry when there + * is no enough free slots in the queue to hold @rx_count packets, + * to diminish packet loss. */ - if (enable_retry && unlikely(count > free_entries)) { + if (enable_retry && + unlikely(rx_count > rte_vhost_avail_entries(vdev->vid, + VIRTIO_RXQ))) { + uint32_t retry; + for (retry = 0; retry < burst_rx_retry_num; retry++) { rte_delay_us(burst_rx_delay_time); - avail_idx = *((volatile uint16_t *)&vq->avail->idx); - free_entries = (avail_idx - *res_base_idx); - if (count <= free_entries) + if (rx_count <= rte_vhost_avail_entries(vdev->vid, + VIRTIO_RXQ)) break; } } - /*check that we have enough buffers*/ - if (unlikely(count > free_entries)) - count = free_entries; - - if (unlikely(count == 0)) { - LOG_DEBUG(VHOST_DATA, - "(%"PRIu64") Fail in get_available_ring_index_zcp: " - "avail idx: %d, res base idx:%d, free entries:%d\n", - dev->device_fh, avail_idx, - *res_base_idx, free_entries); - return 0; + enqueue_count = rte_vhost_enqueue_burst(vdev->vid, VIRTIO_RXQ, + pkts, rx_count); + if (enable_stats) { + rte_atomic64_add(&vdev->stats.rx_total_atomic, rx_count); + rte_atomic64_add(&vdev->stats.rx_atomic, enqueue_count); } - vq->last_used_idx_res = *res_base_idx + count; - - return count; + free_pkts(pkts, rx_count); } -/* - * This function put descriptor back to used list. - */ static inline void __attribute__((always_inline)) -put_desc_to_used_list_zcp(struct vhost_virtqueue *vq, uint16_t desc_idx) +drain_virtio_tx(struct vhost_dev *vdev) { - uint16_t res_cur_idx = vq->last_used_idx; - vq->used->ring[res_cur_idx & (vq->size - 1)].id = (uint32_t)desc_idx; - vq->used->ring[res_cur_idx & (vq->size - 1)].len = 0; - rte_compiler_barrier(); - *(volatile uint16_t *)&vq->used->idx += 1; - vq->last_used_idx += 1; - - /* Kick the guest if necessary. */ - if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT)) - eventfd_write(vq->callfd, (eventfd_t)1); -} + struct rte_mbuf *pkts[MAX_PKT_BURST]; + uint16_t count; + uint16_t i; -/* - * This function get available descriptor from vitio vring and un-attached mbuf - * from vpool->ring, and then attach them together. It needs adjust the offset - * for buff_addr and phys_addr accroding to PMD implementation, otherwise the - * frame data may be put to wrong location in mbuf. - */ -static inline void __attribute__((always_inline)) -attach_rxmbuf_zcp(struct virtio_net *dev) -{ - uint16_t res_base_idx, desc_idx; - uint64_t buff_addr, phys_addr; - struct vhost_virtqueue *vq; - struct vring_desc *desc; - void *obj = NULL; - struct rte_mbuf *mbuf; - struct vpool *vpool; - hpa_type addr_type; - struct vhost_dev *vdev = (struct vhost_dev *)dev->priv; - - vpool = &vpool_array[vdev->vmdq_rx_q]; - vq = dev->virtqueue[VIRTIO_RXQ]; - - do { - if (unlikely(get_available_ring_index_zcp(vdev->dev, &res_base_idx, - 1) != 1)) - return; - desc_idx = vq->avail->ring[(res_base_idx) & (vq->size - 1)]; - - desc = &vq->desc[desc_idx]; - if (desc->flags & VRING_DESC_F_NEXT) { - desc = &vq->desc[desc->next]; - buff_addr = gpa_to_vva(dev, desc->addr); - phys_addr = gpa_to_hpa(vdev, desc->addr, desc->len, - &addr_type); - } else { - buff_addr = gpa_to_vva(dev, - desc->addr + vq->vhost_hlen); - phys_addr = gpa_to_hpa(vdev, - desc->addr + vq->vhost_hlen, - desc->len, &addr_type); - } + count = rte_vhost_dequeue_burst(vdev->vid, VIRTIO_TXQ, mbuf_pool, + pkts, MAX_PKT_BURST); - if (unlikely(addr_type == PHYS_ADDR_INVALID)) { - RTE_LOG(ERR, VHOST_DATA, "(%"PRIu64") Invalid frame buffer" - " address found when attaching RX frame buffer" - " address!\n", dev->device_fh); - put_desc_to_used_list_zcp(vq, desc_idx); - continue; - } - - /* - * Check if the frame buffer address from guest crosses - * sub-region or not. - */ - if (unlikely(addr_type == PHYS_ADDR_CROSS_SUBREG)) { - RTE_LOG(ERR, VHOST_DATA, - "(%"PRIu64") Frame buffer address cross " - "sub-regioin found when attaching RX frame " - "buffer address!\n", - dev->device_fh); - put_desc_to_used_list_zcp(vq, desc_idx); - continue; - } - } while (unlikely(phys_addr == 0)); - - rte_ring_sc_dequeue(vpool->ring, &obj); - mbuf = obj; - if (unlikely(mbuf == NULL)) { - LOG_DEBUG(VHOST_DATA, - "(%"PRIu64") in attach_rxmbuf_zcp: " - "ring_sc_dequeue fail.\n", - dev->device_fh); - put_desc_to_used_list_zcp(vq, desc_idx); - return; - } - - if (unlikely(vpool->buf_size > desc->len)) { - LOG_DEBUG(VHOST_DATA, - "(%"PRIu64") in attach_rxmbuf_zcp: frame buffer " - "length(%d) of descriptor idx: %d less than room " - "size required: %d\n", - dev->device_fh, desc->len, desc_idx, vpool->buf_size); - put_desc_to_used_list_zcp(vq, desc_idx); - rte_ring_sp_enqueue(vpool->ring, obj); - return; + /* setup VMDq for the first packet */ + if (unlikely(vdev->ready == DEVICE_MAC_LEARNING) && count) { + if (vdev->remove || link_vmdq(vdev, pkts[0]) == -1) + free_pkts(pkts, count); } - mbuf->buf_addr = (void *)(uintptr_t)(buff_addr - RTE_PKTMBUF_HEADROOM); - mbuf->data_off = RTE_PKTMBUF_HEADROOM; - mbuf->buf_physaddr = phys_addr - RTE_PKTMBUF_HEADROOM; - mbuf->data_len = desc->len; - MBUF_HEADROOM_UINT32(mbuf) = (uint32_t)desc_idx; - - LOG_DEBUG(VHOST_DATA, - "(%"PRIu64") in attach_rxmbuf_zcp: res base idx:%d, " - "descriptor idx:%d\n", - dev->device_fh, res_base_idx, desc_idx); - - __rte_mbuf_raw_free(mbuf); - - return; + for (i = 0; i < count; ++i) + virtio_tx_route(vdev, pkts[i], vlan_tags[vdev->vid]); } /* - * Detach an attched packet mbuf - - * - restore original mbuf address and length values. - * - reset pktmbuf data and data_len to their default values. - * All other fields of the given packet mbuf will be left intact. + * Main function of vhost-switch. It basically does: * - * @param m - * The attached packet mbuf. - */ -static inline void pktmbuf_detach_zcp(struct rte_mbuf *m) -{ - const struct rte_mempool *mp = m->pool; - void *buf = rte_mbuf_to_baddr(m); - uint32_t buf_ofs; - uint32_t buf_len = mp->elt_size - sizeof(*m); - m->buf_physaddr = rte_mempool_virt2phy(mp, m) + sizeof(*m); - - m->buf_addr = buf; - m->buf_len = (uint16_t)buf_len; - - buf_ofs = (RTE_PKTMBUF_HEADROOM <= m->buf_len) ? - RTE_PKTMBUF_HEADROOM : m->buf_len; - m->data_off = buf_ofs; - - m->data_len = 0; -} - -/* - * This function is called after packets have been transimited. It fetchs mbuf - * from vpool->pool, detached it and put into vpool->ring. It also update the - * used index and kick the guest if necessary. - */ -static inline uint32_t __attribute__((always_inline)) -txmbuf_clean_zcp(struct virtio_net *dev, struct vpool *vpool) -{ - struct rte_mbuf *mbuf; - struct vhost_virtqueue *vq = dev->virtqueue[VIRTIO_TXQ]; - uint32_t used_idx = vq->last_used_idx & (vq->size - 1); - uint32_t index = 0; - uint32_t mbuf_count = rte_mempool_count(vpool->pool); - - LOG_DEBUG(VHOST_DATA, - "(%"PRIu64") in txmbuf_clean_zcp: mbuf count in mempool before " - "clean is: %d\n", - dev->device_fh, mbuf_count); - LOG_DEBUG(VHOST_DATA, - "(%"PRIu64") in txmbuf_clean_zcp: mbuf count in ring before " - "clean is : %d\n", - dev->device_fh, rte_ring_count(vpool->ring)); - - for (index = 0; index < mbuf_count; index++) { - mbuf = __rte_mbuf_raw_alloc(vpool->pool); - if (likely(MBUF_EXT_MEM(mbuf))) - pktmbuf_detach_zcp(mbuf); - rte_ring_sp_enqueue(vpool->ring, mbuf); - - /* Update used index buffer information. */ - vq->used->ring[used_idx].id = MBUF_HEADROOM_UINT32(mbuf); - vq->used->ring[used_idx].len = 0; - - used_idx = (used_idx + 1) & (vq->size - 1); - } - - LOG_DEBUG(VHOST_DATA, - "(%"PRIu64") in txmbuf_clean_zcp: mbuf count in mempool after " - "clean is: %d\n", - dev->device_fh, rte_mempool_count(vpool->pool)); - LOG_DEBUG(VHOST_DATA, - "(%"PRIu64") in txmbuf_clean_zcp: mbuf count in ring after " - "clean is : %d\n", - dev->device_fh, rte_ring_count(vpool->ring)); - LOG_DEBUG(VHOST_DATA, - "(%"PRIu64") in txmbuf_clean_zcp: before updated " - "vq->last_used_idx:%d\n", - dev->device_fh, vq->last_used_idx); - - vq->last_used_idx += mbuf_count; - - LOG_DEBUG(VHOST_DATA, - "(%"PRIu64") in txmbuf_clean_zcp: after updated " - "vq->last_used_idx:%d\n", - dev->device_fh, vq->last_used_idx); - - rte_compiler_barrier(); - - *(volatile uint16_t *)&vq->used->idx += mbuf_count; - - /* Kick guest if required. */ - if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT)) - eventfd_write(vq->callfd, (eventfd_t)1); - - return 0; -} - -/* - * This function is called when a virtio device is destroy. - * It fetchs mbuf from vpool->pool, and detached it, and put into vpool->ring. - */ -static void mbuf_destroy_zcp(struct vpool *vpool) -{ - struct rte_mbuf *mbuf = NULL; - uint32_t index, mbuf_count = rte_mempool_count(vpool->pool); - - LOG_DEBUG(VHOST_CONFIG, - "in mbuf_destroy_zcp: mbuf count in mempool before " - "mbuf_destroy_zcp is: %d\n", - mbuf_count); - LOG_DEBUG(VHOST_CONFIG, - "in mbuf_destroy_zcp: mbuf count in ring before " - "mbuf_destroy_zcp is : %d\n", - rte_ring_count(vpool->ring)); - - for (index = 0; index < mbuf_count; index++) { - mbuf = __rte_mbuf_raw_alloc(vpool->pool); - if (likely(mbuf != NULL)) { - if (likely(MBUF_EXT_MEM(mbuf))) - pktmbuf_detach_zcp(mbuf); - rte_ring_sp_enqueue(vpool->ring, (void *)mbuf); - } - } - - LOG_DEBUG(VHOST_CONFIG, - "in mbuf_destroy_zcp: mbuf count in mempool after " - "mbuf_destroy_zcp is: %d\n", - rte_mempool_count(vpool->pool)); - LOG_DEBUG(VHOST_CONFIG, - "in mbuf_destroy_zcp: mbuf count in ring after " - "mbuf_destroy_zcp is : %d\n", - rte_ring_count(vpool->ring)); -} - -/* - * This function update the use flag and counter. - */ -static inline uint32_t __attribute__((always_inline)) -virtio_dev_rx_zcp(struct virtio_net *dev, struct rte_mbuf **pkts, - uint32_t count) -{ - struct vhost_virtqueue *vq; - struct vring_desc *desc; - struct rte_mbuf *buff; - /* The virtio_hdr is initialised to 0. */ - struct virtio_net_hdr_mrg_rxbuf virtio_hdr - = {{0, 0, 0, 0, 0, 0}, 0}; - uint64_t buff_hdr_addr = 0; - uint32_t head[MAX_PKT_BURST], packet_len = 0; - uint32_t head_idx, packet_success = 0; - uint16_t res_cur_idx; - - LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_rx()\n", dev->device_fh); - - if (count == 0) - return 0; - - vq = dev->virtqueue[VIRTIO_RXQ]; - count = (count > MAX_PKT_BURST) ? MAX_PKT_BURST : count; - - res_cur_idx = vq->last_used_idx; - LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Current Index %d| End Index %d\n", - dev->device_fh, res_cur_idx, res_cur_idx + count); - - /* Retrieve all of the head indexes first to avoid caching issues. */ - for (head_idx = 0; head_idx < count; head_idx++) - head[head_idx] = MBUF_HEADROOM_UINT32(pkts[head_idx]); - - /*Prefetch descriptor index. */ - rte_prefetch0(&vq->desc[head[packet_success]]); - - while (packet_success != count) { - /* Get descriptor from available ring */ - desc = &vq->desc[head[packet_success]]; - - buff = pkts[packet_success]; - LOG_DEBUG(VHOST_DATA, - "(%"PRIu64") in dev_rx_zcp: update the used idx for " - "pkt[%d] descriptor idx: %d\n", - dev->device_fh, packet_success, - MBUF_HEADROOM_UINT32(buff)); - - PRINT_PACKET(dev, - (uintptr_t)(((uint64_t)(uintptr_t)buff->buf_addr) - + RTE_PKTMBUF_HEADROOM), - rte_pktmbuf_data_len(buff), 0); - - /* Buffer address translation for virtio header. */ - buff_hdr_addr = gpa_to_vva(dev, desc->addr); - packet_len = rte_pktmbuf_data_len(buff) + vq->vhost_hlen; - - /* - * If the descriptors are chained the header and data are - * placed in separate buffers. - */ - if (desc->flags & VRING_DESC_F_NEXT) { - desc->len = vq->vhost_hlen; - desc = &vq->desc[desc->next]; - desc->len = rte_pktmbuf_data_len(buff); - } else { - desc->len = packet_len; - } - - /* Update used ring with desc information */ - vq->used->ring[res_cur_idx & (vq->size - 1)].id - = head[packet_success]; - vq->used->ring[res_cur_idx & (vq->size - 1)].len - = packet_len; - res_cur_idx++; - packet_success++; - - /* A header is required per buffer. */ - rte_memcpy((void *)(uintptr_t)buff_hdr_addr, - (const void *)&virtio_hdr, vq->vhost_hlen); - - PRINT_PACKET(dev, (uintptr_t)buff_hdr_addr, vq->vhost_hlen, 1); - - if (likely(packet_success < count)) { - /* Prefetch descriptor index. */ - rte_prefetch0(&vq->desc[head[packet_success]]); - } - } - - rte_compiler_barrier(); - - LOG_DEBUG(VHOST_DATA, - "(%"PRIu64") in dev_rx_zcp: before update used idx: " - "vq.last_used_idx: %d, vq->used->idx: %d\n", - dev->device_fh, vq->last_used_idx, vq->used->idx); - - *(volatile uint16_t *)&vq->used->idx += count; - vq->last_used_idx += count; - - LOG_DEBUG(VHOST_DATA, - "(%"PRIu64") in dev_rx_zcp: after update used idx: " - "vq.last_used_idx: %d, vq->used->idx: %d\n", - dev->device_fh, vq->last_used_idx, vq->used->idx); - - /* Kick the guest if necessary. */ - if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT)) - eventfd_write(vq->callfd, (eventfd_t)1); - - return count; -} - -/* - * This function routes the TX packet to the correct interface. - * This may be a local device or the physical port. + * for each vhost device { + * - drain_eth_rx() + * + * Which drains the host eth Rx queue linked to the vhost device, + * and deliver all of them to guest virito Rx ring associated with + * this vhost device. + * + * - drain_virtio_tx() + * + * Which drains the guest virtio Tx queue and deliver all of them + * to the target, which could be another vhost device, or the + * physical eth dev. The route is done in function "virtio_tx_route". + * } */ -static inline void __attribute__((always_inline)) -virtio_tx_route_zcp(struct virtio_net *dev, struct rte_mbuf *m, - uint32_t desc_idx, uint8_t need_copy) +static int +switch_worker(void *arg __rte_unused) { + unsigned i; + unsigned lcore_id = rte_lcore_id(); + struct vhost_dev *vdev; struct mbuf_table *tx_q; - struct rte_mbuf **m_table; - void *obj = NULL; - struct rte_mbuf *mbuf; - unsigned len, ret, offset = 0; - struct vpool *vpool; - uint16_t vlan_tag = (uint16_t)vlan_tags[(uint16_t)dev->device_fh]; - uint16_t vmdq_rx_q = ((struct vhost_dev *)dev->priv)->vmdq_rx_q; - - /*Add packet to the port tx queue*/ - tx_q = &tx_queue_zcp[vmdq_rx_q]; - len = tx_q->len; - - /* Allocate an mbuf and populate the structure. */ - vpool = &vpool_array[MAX_QUEUES + vmdq_rx_q]; - rte_ring_sc_dequeue(vpool->ring, &obj); - mbuf = obj; - if (unlikely(mbuf == NULL)) { - struct vhost_virtqueue *vq = dev->virtqueue[VIRTIO_TXQ]; - RTE_LOG(ERR, VHOST_DATA, - "(%"PRIu64") Failed to allocate memory for mbuf.\n", - dev->device_fh); - put_desc_to_used_list_zcp(vq, desc_idx); - return; - } - - if (vm2vm_mode == VM2VM_HARDWARE) { - /* Avoid using a vlan tag from any vm for external pkt, such as - * vlan_tags[dev->device_fh], oterwise, it conflicts when pool - * selection, MAC address determines it as an external pkt - * which should go to network, while vlan tag determine it as - * a vm2vm pkt should forward to another vm. Hardware confuse - * such a ambiguous situation, so pkt will lost. - */ - vlan_tag = external_pkt_default_vlan_tag; - if (find_local_dest(dev, m, &offset, &vlan_tag) != 0) { - MBUF_HEADROOM_UINT32(mbuf) = (uint32_t)desc_idx; - __rte_mbuf_raw_free(mbuf); - return; - } - } - - mbuf->nb_segs = m->nb_segs; - mbuf->next = m->next; - mbuf->data_len = m->data_len + offset; - mbuf->pkt_len = mbuf->data_len; - if (unlikely(need_copy)) { - /* Copy the packet contents to the mbuf. */ - rte_memcpy(rte_pktmbuf_mtod(mbuf, void *), - rte_pktmbuf_mtod(m, void *), - m->data_len); - } else { - mbuf->data_off = m->data_off; - mbuf->buf_physaddr = m->buf_physaddr; - mbuf->buf_addr = m->buf_addr; - } - mbuf->ol_flags |= PKT_TX_VLAN_PKT; - mbuf->vlan_tci = vlan_tag; - mbuf->l2_len = sizeof(struct ether_hdr); - mbuf->l3_len = sizeof(struct ipv4_hdr); - MBUF_HEADROOM_UINT32(mbuf) = (uint32_t)desc_idx; - - tx_q->m_table[len] = mbuf; - len++; - - LOG_DEBUG(VHOST_DATA, - "(%"PRIu64") in tx_route_zcp: pkt: nb_seg: %d, next:%s\n", - dev->device_fh, - mbuf->nb_segs, - (mbuf->next == NULL) ? "null" : "non-null"); - - if (enable_stats) { - dev_statistics[dev->device_fh].tx_total++; - dev_statistics[dev->device_fh].tx++; - } - if (unlikely(len == MAX_PKT_BURST)) { - m_table = (struct rte_mbuf **)tx_q->m_table; - ret = rte_eth_tx_burst(ports[0], - (uint16_t)tx_q->txq_id, m_table, (uint16_t) len); + RTE_LOG(INFO, VHOST_DATA, "Procesing on Core %u started\n", lcore_id); - /* - * Free any buffers not handled by TX and update - * the port stats. - */ - if (unlikely(ret < len)) { - do { - rte_pktmbuf_free(m_table[ret]); - } while (++ret < len); + tx_q = &lcore_tx_queue[lcore_id]; + for (i = 0; i < rte_lcore_count(); i++) { + if (lcore_ids[i] == lcore_id) { + tx_q->txq_id = i; + break; } - - len = 0; - txmbuf_clean_zcp(dev, vpool); } - tx_q->len = len; - - return; -} - -/* - * This function TX all available packets in virtio TX queue for one - * virtio-net device. If it is first packet, it learns MAC address and - * setup VMDQ. - */ -static inline void __attribute__((always_inline)) -virtio_dev_tx_zcp(struct virtio_net *dev) -{ - struct rte_mbuf m; - struct vhost_virtqueue *vq; - struct vring_desc *desc; - uint64_t buff_addr = 0, phys_addr; - uint32_t head[MAX_PKT_BURST]; - uint32_t i; - uint16_t free_entries, packet_success = 0; - uint16_t avail_idx; - uint8_t need_copy = 0; - hpa_type addr_type; - struct vhost_dev *vdev = (struct vhost_dev *)dev->priv; - - vq = dev->virtqueue[VIRTIO_TXQ]; - avail_idx = *((volatile uint16_t *)&vq->avail->idx); - - /* If there are no available buffers then return. */ - if (vq->last_used_idx_res == avail_idx) - return; - - LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_tx()\n", dev->device_fh); - - /* Prefetch available ring to retrieve head indexes. */ - rte_prefetch0(&vq->avail->ring[vq->last_used_idx_res & (vq->size - 1)]); - - /* Get the number of free entries in the ring */ - free_entries = (avail_idx - vq->last_used_idx_res); - - /* Limit to MAX_PKT_BURST. */ - free_entries - = (free_entries > MAX_PKT_BURST) ? MAX_PKT_BURST : free_entries; - - LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Buffers available %d\n", - dev->device_fh, free_entries); - - /* Retrieve all of the head indexes first to avoid caching issues. */ - for (i = 0; i < free_entries; i++) - head[i] - = vq->avail->ring[(vq->last_used_idx_res + i) - & (vq->size - 1)]; - - vq->last_used_idx_res += free_entries; - - /* Prefetch descriptor index. */ - rte_prefetch0(&vq->desc[head[packet_success]]); - rte_prefetch0(&vq->used->ring[vq->last_used_idx & (vq->size - 1)]); - - while (packet_success < free_entries) { - desc = &vq->desc[head[packet_success]]; - - /* Discard first buffer as it is the virtio header */ - desc = &vq->desc[desc->next]; - - /* Buffer address translation. */ - buff_addr = gpa_to_vva(dev, desc->addr); - /* Need check extra VLAN_HLEN size for inserting VLAN tag */ - phys_addr = gpa_to_hpa(vdev, desc->addr, desc->len + VLAN_HLEN, - &addr_type); - - if (likely(packet_success < (free_entries - 1))) - /* Prefetch descriptor index. */ - rte_prefetch0(&vq->desc[head[packet_success + 1]]); - - if (unlikely(addr_type == PHYS_ADDR_INVALID)) { - RTE_LOG(ERR, VHOST_DATA, - "(%"PRIu64") Invalid frame buffer address found" - "when TX packets!\n", - dev->device_fh); - packet_success++; - continue; - } - - /* Prefetch buffer address. */ - rte_prefetch0((void *)(uintptr_t)buff_addr); - - /* - * Setup dummy mbuf. This is copied to a real mbuf if - * transmitted out the physical port. - */ - m.data_len = desc->len; - m.nb_segs = 1; - m.next = NULL; - m.data_off = 0; - m.buf_addr = (void *)(uintptr_t)buff_addr; - m.buf_physaddr = phys_addr; - - /* - * Check if the frame buffer address from guest crosses - * sub-region or not. - */ - if (unlikely(addr_type == PHYS_ADDR_CROSS_SUBREG)) { - RTE_LOG(ERR, VHOST_DATA, - "(%"PRIu64") Frame buffer address cross " - "sub-regioin found when attaching TX frame " - "buffer address!\n", - dev->device_fh); - need_copy = 1; - } else - need_copy = 0; - - PRINT_PACKET(dev, (uintptr_t)buff_addr, desc->len, 0); + while(1) { + drain_mbuf_table(tx_q); /* - * If this is the first received packet we need to learn - * the MAC and setup VMDQ + * Inform the configuration core that we have exited the + * linked list and that no devices are in use if requested. */ - if (unlikely(vdev->ready == DEVICE_MAC_LEARNING)) { - if (vdev->remove || (link_vmdq(vdev, &m) == -1)) { - /* - * Discard frame if device is scheduled for - * removal or a duplicate MAC address is found. - */ - packet_success += free_entries; - vq->last_used_idx += packet_success; - break; - } - } - - virtio_tx_route_zcp(dev, &m, head[packet_success], need_copy); - packet_success++; - } -} - -/* - * This function is called by each data core. It handles all RX/TX registered - * with the core. For TX the specific lcore linked list is used. For RX, MAC - * addresses are compared with all devices in the main linked list. - */ -static int -switch_worker_zcp(__attribute__((unused)) void *arg) -{ - struct virtio_net *dev = NULL; - struct vhost_dev *vdev = NULL; - struct rte_mbuf *pkts_burst[MAX_PKT_BURST]; - struct virtio_net_data_ll *dev_ll; - struct mbuf_table *tx_q; - volatile struct lcore_ll_info *lcore_ll; - const uint64_t drain_tsc - = (rte_get_tsc_hz() + US_PER_S - 1) / US_PER_S - * BURST_TX_DRAIN_US; - uint64_t prev_tsc, diff_tsc, cur_tsc, ret_count = 0; - unsigned ret; - const uint16_t lcore_id = rte_lcore_id(); - uint16_t count_in_ring, rx_count = 0; - - RTE_LOG(INFO, VHOST_DATA, "Procesing on Core %u started\n", lcore_id); - - lcore_ll = lcore_info[lcore_id].lcore_ll; - prev_tsc = 0; - - while (1) { - cur_tsc = rte_rdtsc(); - - /* TX burst queue drain */ - diff_tsc = cur_tsc - prev_tsc; - if (unlikely(diff_tsc > drain_tsc)) { - /* - * Get mbuf from vpool.pool and detach mbuf and - * put back into vpool.ring. - */ - dev_ll = lcore_ll->ll_root_used; - while ((dev_ll != NULL) && (dev_ll->vdev != NULL)) { - /* Get virtio device ID */ - vdev = dev_ll->vdev; - dev = vdev->dev; - - if (likely(!vdev->remove)) { - tx_q = &tx_queue_zcp[(uint16_t)vdev->vmdq_rx_q]; - if (tx_q->len) { - LOG_DEBUG(VHOST_DATA, - "TX queue drained after timeout" - " with burst size %u\n", - tx_q->len); - - /* - * Tx any packets in the queue - */ - ret = rte_eth_tx_burst( - ports[0], - (uint16_t)tx_q->txq_id, - (struct rte_mbuf **) - tx_q->m_table, - (uint16_t)tx_q->len); - if (unlikely(ret < tx_q->len)) { - do { - rte_pktmbuf_free( - tx_q->m_table[ret]); - } while (++ret < tx_q->len); - } - tx_q->len = 0; - - txmbuf_clean_zcp(dev, - &vpool_array[MAX_QUEUES+vdev->vmdq_rx_q]); - } - } - dev_ll = dev_ll->next; - } - prev_tsc = cur_tsc; - } - - rte_prefetch0(lcore_ll->ll_root_used); + if (lcore_info[lcore_id].dev_removal_flag == REQUEST_DEV_REMOVAL) + lcore_info[lcore_id].dev_removal_flag = ACK_DEV_REMOVAL; /* - * Inform the configuration core that we have exited the linked - * list and that no devices are in use if requested. + * Process vhost devices */ - if (lcore_ll->dev_removal_flag == REQUEST_DEV_REMOVAL) - lcore_ll->dev_removal_flag = ACK_DEV_REMOVAL; - - /* Process devices */ - dev_ll = lcore_ll->ll_root_used; - - while ((dev_ll != NULL) && (dev_ll->vdev != NULL)) { - vdev = dev_ll->vdev; - dev = vdev->dev; + TAILQ_FOREACH(vdev, &lcore_info[lcore_id].vdev_list, + lcore_vdev_entry) { if (unlikely(vdev->remove)) { - dev_ll = dev_ll->next; unlink_vmdq(vdev); vdev->ready = DEVICE_SAFE_REMOVE; continue; } - if (likely(vdev->ready == DEVICE_RX)) { - uint32_t index = vdev->vmdq_rx_q; - uint16_t i; - count_in_ring - = rte_ring_count(vpool_array[index].ring); - uint16_t free_entries - = (uint16_t)get_available_ring_num_zcp(dev); - - /* - * Attach all mbufs in vpool.ring and put back - * into vpool.pool. - */ - for (i = 0; - i < RTE_MIN(free_entries, - RTE_MIN(count_in_ring, MAX_PKT_BURST)); - i++) - attach_rxmbuf_zcp(dev); - - /* Handle guest RX */ - rx_count = rte_eth_rx_burst(ports[0], - vdev->vmdq_rx_q, pkts_burst, - MAX_PKT_BURST); - - if (rx_count) { - ret_count = virtio_dev_rx_zcp(dev, - pkts_burst, rx_count); - if (enable_stats) { - dev_statistics[dev->device_fh].rx_total - += rx_count; - dev_statistics[dev->device_fh].rx - += ret_count; - } - while (likely(rx_count)) { - rx_count--; - pktmbuf_detach_zcp( - pkts_burst[rx_count]); - rte_ring_sp_enqueue( - vpool_array[index].ring, - (void *)pkts_burst[rx_count]); - } - } - } + if (likely(vdev->ready == DEVICE_RX)) + drain_eth_rx(vdev); if (likely(!vdev->remove)) - /* Handle guest TX */ - virtio_dev_tx_zcp(dev); - - /* Move to the next device in the list */ - dev_ll = dev_ll->next; + drain_virtio_tx(vdev); } } return 0; } - -/* - * Add an entry to a used linked list. A free entry must first be found - * in the free linked list using get_data_ll_free_entry(); - */ -static void -add_data_ll_entry(struct virtio_net_data_ll **ll_root_addr, - struct virtio_net_data_ll *ll_dev) -{ - struct virtio_net_data_ll *ll = *ll_root_addr; - - /* Set next as NULL and use a compiler barrier to avoid reordering. */ - ll_dev->next = NULL; - rte_compiler_barrier(); - - /* If ll == NULL then this is the first device. */ - if (ll) { - /* Increment to the tail of the linked list. */ - while ((ll->next != NULL) ) - ll = ll->next; - - ll->next = ll_dev; - } else { - *ll_root_addr = ll_dev; - } -} - -/* - * Remove an entry from a used linked list. The entry must then be added to - * the free linked list using put_data_ll_free_entry(). - */ -static void -rm_data_ll_entry(struct virtio_net_data_ll **ll_root_addr, - struct virtio_net_data_ll *ll_dev, - struct virtio_net_data_ll *ll_dev_last) -{ - struct virtio_net_data_ll *ll = *ll_root_addr; - - if (unlikely((ll == NULL) || (ll_dev == NULL))) - return; - - if (ll_dev == ll) - *ll_root_addr = ll_dev->next; - else - if (likely(ll_dev_last != NULL)) - ll_dev_last->next = ll_dev->next; - else - RTE_LOG(ERR, VHOST_CONFIG, "Remove entry form ll failed.\n"); -} - -/* - * Find and return an entry from the free linked list. - */ -static struct virtio_net_data_ll * -get_data_ll_free_entry(struct virtio_net_data_ll **ll_root_addr) -{ - struct virtio_net_data_ll *ll_free = *ll_root_addr; - struct virtio_net_data_ll *ll_dev; - - if (ll_free == NULL) - return NULL; - - ll_dev = ll_free; - *ll_root_addr = ll_free->next; - - return ll_dev; -} - -/* - * Place an entry back on to the free linked list. - */ -static void -put_data_ll_free_entry(struct virtio_net_data_ll **ll_root_addr, - struct virtio_net_data_ll *ll_dev) -{ - struct virtio_net_data_ll *ll_free = *ll_root_addr; - - if (ll_dev == NULL) - return; - - ll_dev->next = ll_free; - *ll_root_addr = ll_dev; -} - /* - * Creates a linked list of a given size. - */ -static struct virtio_net_data_ll * -alloc_data_ll(uint32_t size) -{ - struct virtio_net_data_ll *ll_new; - uint32_t i; - - /* Malloc and then chain the linked list. */ - ll_new = malloc(size * sizeof(struct virtio_net_data_ll)); - if (ll_new == NULL) { - RTE_LOG(ERR, VHOST_CONFIG, "Failed to allocate memory for ll_new.\n"); - return NULL; - } - - for (i = 0; i < size - 1; i++) { - ll_new[i].vdev = NULL; - ll_new[i].next = &ll_new[i+1]; - } - ll_new[i].next = NULL; - - return ll_new; -} - -/* - * Create the main linked list along with each individual cores linked list. A used and a free list - * are created to manage entries. - */ -static int -init_data_ll (void) -{ - int lcore; - - RTE_LCORE_FOREACH_SLAVE(lcore) { - lcore_info[lcore].lcore_ll = malloc(sizeof(struct lcore_ll_info)); - if (lcore_info[lcore].lcore_ll == NULL) { - RTE_LOG(ERR, VHOST_CONFIG, "Failed to allocate memory for lcore_ll.\n"); - return -1; - } - - lcore_info[lcore].lcore_ll->device_num = 0; - lcore_info[lcore].lcore_ll->dev_removal_flag = ACK_DEV_REMOVAL; - lcore_info[lcore].lcore_ll->ll_root_used = NULL; - if (num_devices % num_switching_cores) - lcore_info[lcore].lcore_ll->ll_root_free = alloc_data_ll((num_devices / num_switching_cores) + 1); - else - lcore_info[lcore].lcore_ll->ll_root_free = alloc_data_ll(num_devices / num_switching_cores); - } - - /* Allocate devices up to a maximum of MAX_DEVICES. */ - ll_root_free = alloc_data_ll(MIN((num_devices), MAX_DEVICES)); - - return 0; -} - -/* - * Remove a device from the specific data core linked list and from the main linked list. Synchonization - * occurs through the use of the lcore dev_removal_flag. Device is made volatile here to avoid re-ordering + * Remove a device from the specific data core linked list and from the + * main linked list. Synchonization occurs through the use of the + * lcore dev_removal_flag. Device is made volatile here to avoid re-ordering * of dev->remove=1 which can cause an infinite loop in the rte_pause loop. */ static void -destroy_device (volatile struct virtio_net *dev) +destroy_device(int vid) { - struct virtio_net_data_ll *ll_lcore_dev_cur; - struct virtio_net_data_ll *ll_main_dev_cur; - struct virtio_net_data_ll *ll_lcore_dev_last = NULL; - struct virtio_net_data_ll *ll_main_dev_last = NULL; - struct vhost_dev *vdev; + struct vhost_dev *vdev = NULL; int lcore; - dev->flags &= ~VIRTIO_DEV_RUNNING; - - vdev = (struct vhost_dev *)dev->priv; + TAILQ_FOREACH(vdev, &vhost_dev_list, global_vdev_entry) { + if (vdev->vid == vid) + break; + } + if (!vdev) + return; /*set the remove flag. */ vdev->remove = 1; while(vdev->ready != DEVICE_SAFE_REMOVE) { rte_pause(); } - /* Search for entry to be removed from lcore ll */ - ll_lcore_dev_cur = lcore_info[vdev->coreid].lcore_ll->ll_root_used; - while (ll_lcore_dev_cur != NULL) { - if (ll_lcore_dev_cur->vdev == vdev) { - break; - } else { - ll_lcore_dev_last = ll_lcore_dev_cur; - ll_lcore_dev_cur = ll_lcore_dev_cur->next; - } - } - - if (ll_lcore_dev_cur == NULL) { - RTE_LOG(ERR, VHOST_CONFIG, - "(%"PRIu64") Failed to find the dev to be destroy.\n", - dev->device_fh); - return; - } + TAILQ_REMOVE(&lcore_info[vdev->coreid].vdev_list, vdev, + lcore_vdev_entry); + TAILQ_REMOVE(&vhost_dev_list, vdev, global_vdev_entry); - /* Search for entry to be removed from main ll */ - ll_main_dev_cur = ll_root_used; - ll_main_dev_last = NULL; - while (ll_main_dev_cur != NULL) { - if (ll_main_dev_cur->vdev == vdev) { - break; - } else { - ll_main_dev_last = ll_main_dev_cur; - ll_main_dev_cur = ll_main_dev_cur->next; - } - } - - /* Remove entries from the lcore and main ll. */ - rm_data_ll_entry(&lcore_info[vdev->coreid].lcore_ll->ll_root_used, ll_lcore_dev_cur, ll_lcore_dev_last); - rm_data_ll_entry(&ll_root_used, ll_main_dev_cur, ll_main_dev_last); /* Set the dev_removal_flag on each lcore. */ - RTE_LCORE_FOREACH_SLAVE(lcore) { - lcore_info[lcore].lcore_ll->dev_removal_flag = REQUEST_DEV_REMOVAL; - } + RTE_LCORE_FOREACH_SLAVE(lcore) + lcore_info[lcore].dev_removal_flag = REQUEST_DEV_REMOVAL; /* - * Once each core has set the dev_removal_flag to ACK_DEV_REMOVAL we can be sure that - * they can no longer access the device removed from the linked lists and that the devices - * are no longer in use. + * Once each core has set the dev_removal_flag to ACK_DEV_REMOVAL + * we can be sure that they can no longer access the device removed + * from the linked lists and that the devices are no longer in use. */ RTE_LCORE_FOREACH_SLAVE(lcore) { - while (lcore_info[lcore].lcore_ll->dev_removal_flag != ACK_DEV_REMOVAL) { + while (lcore_info[lcore].dev_removal_flag != ACK_DEV_REMOVAL) rte_pause(); - } } - /* Add the entries back to the lcore and main free ll.*/ - put_data_ll_free_entry(&lcore_info[vdev->coreid].lcore_ll->ll_root_free, ll_lcore_dev_cur); - put_data_ll_free_entry(&ll_root_free, ll_main_dev_cur); + lcore_info[vdev->coreid].device_num--; - /* Decrement number of device on the lcore. */ - lcore_info[vdev->coreid].lcore_ll->device_num--; + RTE_LOG(INFO, VHOST_DATA, + "(%d) device has been removed from data core\n", + vdev->vid); - RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Device has been removed from data core\n", dev->device_fh); - - if (zero_copy) { - struct vpool *vpool = &vpool_array[vdev->vmdq_rx_q]; - - /* Stop the RX queue. */ - if (rte_eth_dev_rx_queue_stop(ports[0], vdev->vmdq_rx_q) != 0) { - LOG_DEBUG(VHOST_CONFIG, - "(%"PRIu64") In destroy_device: Failed to stop " - "rx queue:%d\n", - dev->device_fh, - vdev->vmdq_rx_q); - } - - LOG_DEBUG(VHOST_CONFIG, - "(%"PRIu64") in destroy_device: Start put mbuf in " - "mempool back to ring for RX queue: %d\n", - dev->device_fh, vdev->vmdq_rx_q); - - mbuf_destroy_zcp(vpool); - - /* Stop the TX queue. */ - if (rte_eth_dev_tx_queue_stop(ports[0], vdev->vmdq_rx_q) != 0) { - LOG_DEBUG(VHOST_CONFIG, - "(%"PRIu64") In destroy_device: Failed to " - "stop tx queue:%d\n", - dev->device_fh, vdev->vmdq_rx_q); - } - - vpool = &vpool_array[vdev->vmdq_rx_q + MAX_QUEUES]; - - LOG_DEBUG(VHOST_CONFIG, - "(%"PRIu64") destroy_device: Start put mbuf in mempool " - "back to ring for TX queue: %d, dev:(%"PRIu64")\n", - dev->device_fh, (vdev->vmdq_rx_q + MAX_QUEUES), - dev->device_fh); - - mbuf_destroy_zcp(vpool); - rte_free(vdev->regions_hpa); - } rte_free(vdev); - -} - -/* - * Calculate the region count of physical continous regions for one particular - * region of whose vhost virtual address is continous. The particular region - * start from vva_start, with size of 'size' in argument. - */ -static uint32_t -check_hpa_regions(uint64_t vva_start, uint64_t size) -{ - uint32_t i, nregions = 0, page_size = getpagesize(); - uint64_t cur_phys_addr = 0, next_phys_addr = 0; - if (vva_start % page_size) { - LOG_DEBUG(VHOST_CONFIG, - "in check_countinous: vva start(%p) mod page_size(%d) " - "has remainder\n", - (void *)(uintptr_t)vva_start, page_size); - return 0; - } - if (size % page_size) { - LOG_DEBUG(VHOST_CONFIG, - "in check_countinous: " - "size((%"PRIu64")) mod page_size(%d) has remainder\n", - size, page_size); - return 0; - } - for (i = 0; i < size - page_size; i = i + page_size) { - cur_phys_addr - = rte_mem_virt2phy((void *)(uintptr_t)(vva_start + i)); - next_phys_addr = rte_mem_virt2phy( - (void *)(uintptr_t)(vva_start + i + page_size)); - if ((cur_phys_addr + page_size) != next_phys_addr) { - ++nregions; - LOG_DEBUG(VHOST_CONFIG, - "in check_continuous: hva addr:(%p) is not " - "continuous with hva addr:(%p), diff:%d\n", - (void *)(uintptr_t)(vva_start + (uint64_t)i), - (void *)(uintptr_t)(vva_start + (uint64_t)i - + page_size), page_size); - LOG_DEBUG(VHOST_CONFIG, - "in check_continuous: hpa addr:(%p) is not " - "continuous with hpa addr:(%p), " - "diff:(%"PRIu64")\n", - (void *)(uintptr_t)cur_phys_addr, - (void *)(uintptr_t)next_phys_addr, - (next_phys_addr-cur_phys_addr)); - } - } - return nregions; -} - -/* - * Divide each region whose vhost virtual address is continous into a few - * sub-regions, make sure the physical address within each sub-region are - * continous. And fill offset(to GPA) and size etc. information of each - * sub-region into regions_hpa. - */ -static uint32_t -fill_hpa_memory_regions(struct virtio_memory_regions_hpa *mem_region_hpa, struct virtio_memory *virtio_memory) -{ - uint32_t regionidx, regionidx_hpa = 0, i, k, page_size = getpagesize(); - uint64_t cur_phys_addr = 0, next_phys_addr = 0, vva_start; - - if (mem_region_hpa == NULL) - return 0; - - for (regionidx = 0; regionidx < virtio_memory->nregions; regionidx++) { - vva_start = virtio_memory->regions[regionidx].guest_phys_address + - virtio_memory->regions[regionidx].address_offset; - mem_region_hpa[regionidx_hpa].guest_phys_address - = virtio_memory->regions[regionidx].guest_phys_address; - mem_region_hpa[regionidx_hpa].host_phys_addr_offset = - rte_mem_virt2phy((void *)(uintptr_t)(vva_start)) - - mem_region_hpa[regionidx_hpa].guest_phys_address; - LOG_DEBUG(VHOST_CONFIG, - "in fill_hpa_regions: guest phys addr start[%d]:(%p)\n", - regionidx_hpa, - (void *)(uintptr_t) - (mem_region_hpa[regionidx_hpa].guest_phys_address)); - LOG_DEBUG(VHOST_CONFIG, - "in fill_hpa_regions: host phys addr start[%d]:(%p)\n", - regionidx_hpa, - (void *)(uintptr_t) - (mem_region_hpa[regionidx_hpa].host_phys_addr_offset)); - for (i = 0, k = 0; - i < virtio_memory->regions[regionidx].memory_size - - page_size; - i += page_size) { - cur_phys_addr = rte_mem_virt2phy( - (void *)(uintptr_t)(vva_start + i)); - next_phys_addr = rte_mem_virt2phy( - (void *)(uintptr_t)(vva_start + - i + page_size)); - if ((cur_phys_addr + page_size) != next_phys_addr) { - mem_region_hpa[regionidx_hpa].guest_phys_address_end = - mem_region_hpa[regionidx_hpa].guest_phys_address + - k + page_size; - mem_region_hpa[regionidx_hpa].memory_size - = k + page_size; - LOG_DEBUG(VHOST_CONFIG, "in fill_hpa_regions: guest " - "phys addr end [%d]:(%p)\n", - regionidx_hpa, - (void *)(uintptr_t) - (mem_region_hpa[regionidx_hpa].guest_phys_address_end)); - LOG_DEBUG(VHOST_CONFIG, - "in fill_hpa_regions: guest phys addr " - "size [%d]:(%p)\n", - regionidx_hpa, - (void *)(uintptr_t) - (mem_region_hpa[regionidx_hpa].memory_size)); - mem_region_hpa[regionidx_hpa + 1].guest_phys_address - = mem_region_hpa[regionidx_hpa].guest_phys_address_end; - ++regionidx_hpa; - mem_region_hpa[regionidx_hpa].host_phys_addr_offset = - next_phys_addr - - mem_region_hpa[regionidx_hpa].guest_phys_address; - LOG_DEBUG(VHOST_CONFIG, "in fill_hpa_regions: guest" - " phys addr start[%d]:(%p)\n", - regionidx_hpa, - (void *)(uintptr_t) - (mem_region_hpa[regionidx_hpa].guest_phys_address)); - LOG_DEBUG(VHOST_CONFIG, - "in fill_hpa_regions: host phys addr " - "start[%d]:(%p)\n", - regionidx_hpa, - (void *)(uintptr_t) - (mem_region_hpa[regionidx_hpa].host_phys_addr_offset)); - k = 0; - } else { - k += page_size; - } - } - mem_region_hpa[regionidx_hpa].guest_phys_address_end - = mem_region_hpa[regionidx_hpa].guest_phys_address - + k + page_size; - mem_region_hpa[regionidx_hpa].memory_size = k + page_size; - LOG_DEBUG(VHOST_CONFIG, "in fill_hpa_regions: guest phys addr end " - "[%d]:(%p)\n", regionidx_hpa, - (void *)(uintptr_t) - (mem_region_hpa[regionidx_hpa].guest_phys_address_end)); - LOG_DEBUG(VHOST_CONFIG, "in fill_hpa_regions: guest phys addr size " - "[%d]:(%p)\n", regionidx_hpa, - (void *)(uintptr_t) - (mem_region_hpa[regionidx_hpa].memory_size)); - ++regionidx_hpa; - } - return regionidx_hpa; } /* @@ -2654,148 +1224,23 @@ fill_hpa_memory_regions(struct virtio_memory_regions_hpa *mem_region_hpa, struct * and the allocated to a specific data core. */ static int -new_device (struct virtio_net *dev) +new_device(int vid) { - struct virtio_net_data_ll *ll_dev; int lcore, core_add = 0; uint32_t device_num_min = num_devices; struct vhost_dev *vdev; - uint32_t regionidx; vdev = rte_zmalloc("vhost device", sizeof(*vdev), RTE_CACHE_LINE_SIZE); if (vdev == NULL) { - RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Couldn't allocate memory for vhost dev\n", - dev->device_fh); + RTE_LOG(INFO, VHOST_DATA, + "(%d) couldn't allocate memory for vhost dev\n", + vid); return -1; } - vdev->dev = dev; - dev->priv = vdev; - - if (zero_copy) { - vdev->nregions_hpa = dev->mem->nregions; - for (regionidx = 0; regionidx < dev->mem->nregions; regionidx++) { - vdev->nregions_hpa - += check_hpa_regions( - dev->mem->regions[regionidx].guest_phys_address - + dev->mem->regions[regionidx].address_offset, - dev->mem->regions[regionidx].memory_size); + vdev->vid = vid; - } - - vdev->regions_hpa = rte_calloc("vhost hpa region", - vdev->nregions_hpa, - sizeof(struct virtio_memory_regions_hpa), - RTE_CACHE_LINE_SIZE); - if (vdev->regions_hpa == NULL) { - RTE_LOG(ERR, VHOST_CONFIG, "Cannot allocate memory for hpa region\n"); - rte_free(vdev); - return -1; - } - - - if (fill_hpa_memory_regions( - vdev->regions_hpa, dev->mem - ) != vdev->nregions_hpa) { - - RTE_LOG(ERR, VHOST_CONFIG, - "hpa memory regions number mismatch: " - "[%d]\n", vdev->nregions_hpa); - rte_free(vdev->regions_hpa); - rte_free(vdev); - return -1; - } - } - - - /* Add device to main ll */ - ll_dev = get_data_ll_free_entry(&ll_root_free); - if (ll_dev == NULL) { - RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") No free entry found in linked list. Device limit " - "of %d devices per core has been reached\n", - dev->device_fh, num_devices); - if (vdev->regions_hpa) - rte_free(vdev->regions_hpa); - rte_free(vdev); - return -1; - } - ll_dev->vdev = vdev; - add_data_ll_entry(&ll_root_used, ll_dev); - vdev->vmdq_rx_q - = dev->device_fh * queues_per_pool + vmdq_queue_base; - - if (zero_copy) { - uint32_t index = vdev->vmdq_rx_q; - uint32_t count_in_ring, i; - struct mbuf_table *tx_q; - - count_in_ring = rte_ring_count(vpool_array[index].ring); - - LOG_DEBUG(VHOST_CONFIG, - "(%"PRIu64") in new_device: mbuf count in mempool " - "before attach is: %d\n", - dev->device_fh, - rte_mempool_count(vpool_array[index].pool)); - LOG_DEBUG(VHOST_CONFIG, - "(%"PRIu64") in new_device: mbuf count in ring " - "before attach is : %d\n", - dev->device_fh, count_in_ring); - - /* - * Attach all mbufs in vpool.ring and put back intovpool.pool. - */ - for (i = 0; i < count_in_ring; i++) - attach_rxmbuf_zcp(dev); - - LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") in new_device: mbuf count in " - "mempool after attach is: %d\n", - dev->device_fh, - rte_mempool_count(vpool_array[index].pool)); - LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") in new_device: mbuf count in " - "ring after attach is : %d\n", - dev->device_fh, - rte_ring_count(vpool_array[index].ring)); - - tx_q = &tx_queue_zcp[(uint16_t)vdev->vmdq_rx_q]; - tx_q->txq_id = vdev->vmdq_rx_q; - - if (rte_eth_dev_tx_queue_start(ports[0], vdev->vmdq_rx_q) != 0) { - struct vpool *vpool = &vpool_array[vdev->vmdq_rx_q]; - - LOG_DEBUG(VHOST_CONFIG, - "(%"PRIu64") In new_device: Failed to start " - "tx queue:%d\n", - dev->device_fh, vdev->vmdq_rx_q); - - mbuf_destroy_zcp(vpool); - rte_free(vdev->regions_hpa); - rte_free(vdev); - return -1; - } - - if (rte_eth_dev_rx_queue_start(ports[0], vdev->vmdq_rx_q) != 0) { - struct vpool *vpool = &vpool_array[vdev->vmdq_rx_q]; - - LOG_DEBUG(VHOST_CONFIG, - "(%"PRIu64") In new_device: Failed to start " - "rx queue:%d\n", - dev->device_fh, vdev->vmdq_rx_q); - - /* Stop the TX queue. */ - if (rte_eth_dev_tx_queue_stop(ports[0], - vdev->vmdq_rx_q) != 0) { - LOG_DEBUG(VHOST_CONFIG, - "(%"PRIu64") In new_device: Failed to " - "stop tx queue:%d\n", - dev->device_fh, vdev->vmdq_rx_q); - } - - mbuf_destroy_zcp(vpool); - rte_free(vdev->regions_hpa); - rte_free(vdev); - return -1; - } - - } + TAILQ_INSERT_TAIL(&vhost_dev_list, vdev, global_vdev_entry); + vdev->vmdq_rx_q = vid * queues_per_pool + vmdq_queue_base; /*reset ready flag*/ vdev->ready = DEVICE_MAC_LEARNING; @@ -2803,36 +1248,24 @@ new_device (struct virtio_net *dev) /* Find a suitable lcore to add the device. */ RTE_LCORE_FOREACH_SLAVE(lcore) { - if (lcore_info[lcore].lcore_ll->device_num < device_num_min) { - device_num_min = lcore_info[lcore].lcore_ll->device_num; + if (lcore_info[lcore].device_num < device_num_min) { + device_num_min = lcore_info[lcore].device_num; core_add = lcore; } } - /* Add device to lcore ll */ - ll_dev = get_data_ll_free_entry(&lcore_info[core_add].lcore_ll->ll_root_free); - if (ll_dev == NULL) { - RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Failed to add device to data core\n", dev->device_fh); - vdev->ready = DEVICE_SAFE_REMOVE; - destroy_device(dev); - rte_free(vdev->regions_hpa); - rte_free(vdev); - return -1; - } - ll_dev->vdev = vdev; vdev->coreid = core_add; - add_data_ll_entry(&lcore_info[vdev->coreid].lcore_ll->ll_root_used, ll_dev); - - /* Initialize device stats */ - memset(&dev_statistics[dev->device_fh], 0, sizeof(struct device_statistics)); + TAILQ_INSERT_TAIL(&lcore_info[vdev->coreid].vdev_list, vdev, + lcore_vdev_entry); + lcore_info[vdev->coreid].device_num++; /* Disable notifications. */ - rte_vhost_enable_guest_notification(dev, VIRTIO_RXQ, 0); - rte_vhost_enable_guest_notification(dev, VIRTIO_TXQ, 0); - lcore_info[vdev->coreid].lcore_ll->device_num++; - dev->flags |= VIRTIO_DEV_RUNNING; + rte_vhost_enable_guest_notification(vid, VIRTIO_RXQ, 0); + rte_vhost_enable_guest_notification(vid, VIRTIO_TXQ, 0); - RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Device has been added to data core %d\n", dev->device_fh, vdev->coreid); + RTE_LOG(INFO, VHOST_DATA, + "(%d) device has been added to data core %d\n", + vid, vdev->coreid); return 0; } @@ -2854,10 +1287,9 @@ static const struct virtio_net_device_ops virtio_net_device_ops = static void print_stats(void) { - struct virtio_net_data_ll *dev_ll; + struct vhost_dev *vdev; uint64_t tx_dropped, rx_dropped; uint64_t tx, tx_total, rx, rx_total; - uint32_t device_fh; const char clr[] = { 27, '[', '2', 'J', '\0' }; const char top_left[] = { 27, '[', '1', ';', '1', 'H','\0' }; @@ -2865,77 +1297,32 @@ print_stats(void) sleep(enable_stats); /* Clear screen and move to top left */ - printf("%s%s", clr, top_left); - - printf("\nDevice statistics ===================================="); + printf("%s%s\n", clr, top_left); + printf("Device statistics =================================\n"); - dev_ll = ll_root_used; - while (dev_ll != NULL) { - device_fh = (uint32_t)dev_ll->vdev->dev->device_fh; - tx_total = dev_statistics[device_fh].tx_total; - tx = dev_statistics[device_fh].tx; + TAILQ_FOREACH(vdev, &vhost_dev_list, global_vdev_entry) { + tx_total = vdev->stats.tx_total; + tx = vdev->stats.tx; tx_dropped = tx_total - tx; - if (zero_copy == 0) { - rx_total = rte_atomic64_read( - &dev_statistics[device_fh].rx_total_atomic); - rx = rte_atomic64_read( - &dev_statistics[device_fh].rx_atomic); - } else { - rx_total = dev_statistics[device_fh].rx_total; - rx = dev_statistics[device_fh].rx; - } + + rx_total = rte_atomic64_read(&vdev->stats.rx_total_atomic); + rx = rte_atomic64_read(&vdev->stats.rx_atomic); rx_dropped = rx_total - rx; - printf("\nStatistics for device %"PRIu32" ------------------------------" - "\nTX total: %"PRIu64"" - "\nTX dropped: %"PRIu64"" - "\nTX successful: %"PRIu64"" - "\nRX total: %"PRIu64"" - "\nRX dropped: %"PRIu64"" - "\nRX successful: %"PRIu64"", - device_fh, - tx_total, - tx_dropped, - tx, - rx_total, - rx_dropped, - rx); - - dev_ll = dev_ll->next; + printf("Statistics for device %d\n" + "-----------------------\n" + "TX total: %" PRIu64 "\n" + "TX dropped: %" PRIu64 "\n" + "TX successful: %" PRIu64 "\n" + "RX total: %" PRIu64 "\n" + "RX dropped: %" PRIu64 "\n" + "RX successful: %" PRIu64 "\n", + vdev->vid, + tx_total, tx_dropped, tx, + rx_total, rx_dropped, rx); } - printf("\n======================================================\n"); - } -} -static void -setup_mempool_tbl(int socket, uint32_t index, char *pool_name, - char *ring_name, uint32_t nb_mbuf) -{ - vpool_array[index].pool = rte_pktmbuf_pool_create(pool_name, nb_mbuf, - MBUF_CACHE_SIZE_ZCP, 0, MBUF_DATA_SIZE_ZCP, socket); - if (vpool_array[index].pool != NULL) { - vpool_array[index].ring - = rte_ring_create(ring_name, - rte_align32pow2(nb_mbuf + 1), - socket, RING_F_SP_ENQ | RING_F_SC_DEQ); - if (likely(vpool_array[index].ring != NULL)) { - LOG_DEBUG(VHOST_CONFIG, - "in setup_mempool_tbl: mbuf count in " - "mempool is: %d\n", - rte_mempool_count(vpool_array[index].pool)); - LOG_DEBUG(VHOST_CONFIG, - "in setup_mempool_tbl: mbuf count in " - "ring is: %d\n", - rte_ring_count(vpool_array[index].ring)); - } else { - rte_exit(EXIT_FAILURE, "ring_create(%s) failed", - ring_name); - } - - /* Need consider head room. */ - vpool_array[index].buf_size = VIRTIO_DESCRIPTOR_LEN_ZCP; - } else { - rte_exit(EXIT_FAILURE, "mempool_create(%s) failed", pool_name); + printf("===================================================\n"); } } @@ -2951,20 +1338,70 @@ sigint_handler(__rte_unused int signum) } /* + * While creating an mbuf pool, one key thing is to figure out how + * many mbuf entries is enough for our use. FYI, here are some + * guidelines: + * + * - Each rx queue would reserve @nr_rx_desc mbufs at queue setup stage + * + * - For each switch core (A CPU core does the packet switch), we need + * also make some reservation for receiving the packets from virtio + * Tx queue. How many is enough depends on the usage. It's normally + * a simple calculation like following: + * + * MAX_PKT_BURST * max packet size / mbuf size + * + * So, we definitely need allocate more mbufs when TSO is enabled. + * + * - Similarly, for each switching core, we should serve @nr_rx_desc + * mbufs for receiving the packets from physical NIC device. + * + * - We also need make sure, for each switch core, we have allocated + * enough mbufs to fill up the mbuf cache. + */ +static void +create_mbuf_pool(uint16_t nr_port, uint32_t nr_switch_core, uint32_t mbuf_size, + uint32_t nr_queues, uint32_t nr_rx_desc, uint32_t nr_mbuf_cache) +{ + uint32_t nr_mbufs; + uint32_t nr_mbufs_per_core; + uint32_t mtu = 1500; + + if (mergeable) + mtu = 9000; + if (enable_tso) + mtu = 64 * 1024; + + nr_mbufs_per_core = (mtu + mbuf_size) * MAX_PKT_BURST / + (mbuf_size - RTE_PKTMBUF_HEADROOM) * MAX_PKT_BURST; + nr_mbufs_per_core += nr_rx_desc; + nr_mbufs_per_core = RTE_MAX(nr_mbufs_per_core, nr_mbuf_cache); + + nr_mbufs = nr_queues * nr_rx_desc; + nr_mbufs += nr_mbufs_per_core * nr_switch_core; + nr_mbufs *= nr_port; + + mbuf_pool = rte_pktmbuf_pool_create("MBUF_POOL", nr_mbufs, + nr_mbuf_cache, 0, mbuf_size, + rte_socket_id()); + if (mbuf_pool == NULL) + rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n"); +} + +/* * Main function, does initialisation and calls the per-lcore functions. The CUSE * device is also registered here to handle the IOCTLs. */ int main(int argc, char *argv[]) { - struct rte_mempool *mbuf_pool = NULL; unsigned lcore_id, core_id = 0; unsigned nb_ports, valid_num_ports; int ret; uint8_t portid; - uint16_t queue_id; static pthread_t tid; char thread_name[RTE_MAX_THREAD_NAME_LEN]; + uint64_t flags = 0; signal(SIGINT, sigint_handler); @@ -2981,19 +1418,16 @@ main(int argc, char *argv[]) rte_exit(EXIT_FAILURE, "Invalid argument\n"); for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id ++) + TAILQ_INIT(&lcore_info[lcore_id].vdev_list); + if (rte_lcore_is_enabled(lcore_id)) lcore_ids[core_id ++] = lcore_id; if (rte_lcore_count() > RTE_MAX_LCORE) rte_exit(EXIT_FAILURE,"Not enough cores\n"); - /*set the number of swithcing cores available*/ - num_switching_cores = rte_lcore_count()-1; - /* Get the number of physical ports. */ nb_ports = rte_eth_dev_count(); - if (nb_ports > RTE_MAX_ETHPORTS) - nb_ports = RTE_MAX_ETHPORTS; /* * Update the global var NUM_PORTS and global array PORTS @@ -3007,64 +1441,21 @@ main(int argc, char *argv[]) return -1; } - if (zero_copy == 0) { - /* Create the mbuf pool. */ - mbuf_pool = rte_pktmbuf_pool_create("MBUF_POOL", - NUM_MBUFS_PER_PORT * valid_num_ports, MBUF_CACHE_SIZE, - 0, MBUF_DATA_SIZE, rte_socket_id()); - if (mbuf_pool == NULL) - rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n"); - - for (queue_id = 0; queue_id < MAX_QUEUES + 1; queue_id++) - vpool_array[queue_id].pool = mbuf_pool; - - if (vm2vm_mode == VM2VM_HARDWARE) { - /* Enable VT loop back to let L2 switch to do it. */ - vmdq_conf_default.rx_adv_conf.vmdq_rx_conf.enable_loop_back = 1; - LOG_DEBUG(VHOST_CONFIG, - "Enable loop back for L2 switch in vmdq.\n"); - } - } else { - uint32_t nb_mbuf; - char pool_name[RTE_MEMPOOL_NAMESIZE]; - char ring_name[RTE_MEMPOOL_NAMESIZE]; - - nb_mbuf = num_rx_descriptor - + num_switching_cores * MBUF_CACHE_SIZE_ZCP - + num_switching_cores * MAX_PKT_BURST; - - for (queue_id = 0; queue_id < MAX_QUEUES; queue_id++) { - snprintf(pool_name, sizeof(pool_name), - "rxmbuf_pool_%u", queue_id); - snprintf(ring_name, sizeof(ring_name), - "rxmbuf_ring_%u", queue_id); - setup_mempool_tbl(rte_socket_id(), queue_id, - pool_name, ring_name, nb_mbuf); - } - - nb_mbuf = num_tx_descriptor - + num_switching_cores * MBUF_CACHE_SIZE_ZCP - + num_switching_cores * MAX_PKT_BURST; - - for (queue_id = 0; queue_id < MAX_QUEUES; queue_id++) { - snprintf(pool_name, sizeof(pool_name), - "txmbuf_pool_%u", queue_id); - snprintf(ring_name, sizeof(ring_name), - "txmbuf_ring_%u", queue_id); - setup_mempool_tbl(rte_socket_id(), - (queue_id + MAX_QUEUES), - pool_name, ring_name, nb_mbuf); - } + /* + * FIXME: here we are trying to allocate mbufs big enough for + * @MAX_QUEUES, but the truth is we're never going to use that + * many queues here. We probably should only do allocation for + * those queues we are going to use. + */ + create_mbuf_pool(valid_num_ports, rte_lcore_count() - 1, MBUF_DATA_SIZE, + MAX_QUEUES, RTE_TEST_RX_DESC_DEFAULT, MBUF_CACHE_SIZE); - if (vm2vm_mode == VM2VM_HARDWARE) { - /* Enable VT loop back to let L2 switch to do it. */ - vmdq_conf_default.rx_adv_conf.vmdq_rx_conf.enable_loop_back = 1; - LOG_DEBUG(VHOST_CONFIG, - "Enable loop back for L2 switch in vmdq.\n"); - } + if (vm2vm_mode == VM2VM_HARDWARE) { + /* Enable VT loop back to let L2 switch to do it. */ + vmdq_conf_default.rx_adv_conf.vmdq_rx_conf.enable_loop_back = 1; + RTE_LOG(DEBUG, VHOST_CONFIG, + "Enable loop back for L2 switch in vmdq.\n"); } - /* Set log level. */ - rte_set_log_level(LOG_LEVEL); /* initialize all ports */ for (portid = 0; portid < nb_ports; portid++) { @@ -3079,13 +1470,6 @@ main(int argc, char *argv[]) "Cannot initialize network ports\n"); } - /* Initialise all linked lists. */ - if (init_data_ll() == -1) - rte_exit(EXIT_FAILURE, "Failed to initialize linked list\n"); - - /* Initialize device stats */ - memset(&dev_statistics, 0, sizeof(dev_statistics)); - /* Enable stats if the user option is set. */ if (enable_stats) { ret = pthread_create(&tid, NULL, (void *)print_stats, NULL); @@ -3097,54 +1481,22 @@ main(int argc, char *argv[]) snprintf(thread_name, RTE_MAX_THREAD_NAME_LEN, "print-stats"); ret = rte_thread_setname(tid, thread_name); if (ret != 0) - RTE_LOG(ERR, VHOST_CONFIG, + RTE_LOG(DEBUG, VHOST_CONFIG, "Cannot set print-stats name\n"); } /* Launch all data cores. */ - if (zero_copy == 0) { - RTE_LCORE_FOREACH_SLAVE(lcore_id) { - rte_eal_remote_launch(switch_worker, - mbuf_pool, lcore_id); - } - } else { - uint32_t count_in_mempool, index, i; - for (index = 0; index < 2*MAX_QUEUES; index++) { - /* For all RX and TX queues. */ - count_in_mempool - = rte_mempool_count(vpool_array[index].pool); - - /* - * Transfer all un-attached mbufs from vpool.pool - * to vpoo.ring. - */ - for (i = 0; i < count_in_mempool; i++) { - struct rte_mbuf *mbuf - = __rte_mbuf_raw_alloc( - vpool_array[index].pool); - rte_ring_sp_enqueue(vpool_array[index].ring, - (void *)mbuf); - } - - LOG_DEBUG(VHOST_CONFIG, - "in main: mbuf count in mempool at initial " - "is: %d\n", count_in_mempool); - LOG_DEBUG(VHOST_CONFIG, - "in main: mbuf count in ring at initial is :" - " %d\n", - rte_ring_count(vpool_array[index].ring)); - } - - RTE_LCORE_FOREACH_SLAVE(lcore_id) - rte_eal_remote_launch(switch_worker_zcp, NULL, - lcore_id); - } + RTE_LCORE_FOREACH_SLAVE(lcore_id) + rte_eal_remote_launch(switch_worker, NULL, lcore_id); if (mergeable == 0) rte_vhost_feature_disable(1ULL << VIRTIO_NET_F_MRG_RXBUF); + if (client_mode) + flags |= RTE_VHOST_USER_CLIENT; + /* Register vhost(cuse or user) driver to handle vhost messages. */ - ret = rte_vhost_driver_register((char *)&dev_basename); + ret = rte_vhost_driver_register(dev_basename, flags); if (ret != 0) rte_exit(EXIT_FAILURE, "vhost driver register failure.\n"); diff --git a/examples/vhost/main.h b/examples/vhost/main.h index d04e2be2..6bb42e89 100644 --- a/examples/vhost/main.h +++ b/examples/vhost/main.h @@ -1,7 +1,7 @@ /*- * BSD LICENSE * - * Copyright(c) 2010-2014 Intel Corporation. All rights reserved. + * Copyright(c) 2010-2016 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -34,48 +34,23 @@ #ifndef _MAIN_H_ #define _MAIN_H_ -//#define DEBUG - -#ifdef DEBUG -#define LOG_LEVEL RTE_LOG_DEBUG -#define LOG_DEBUG(log_type, fmt, args...) do { \ - RTE_LOG(DEBUG, log_type, fmt, ##args); \ -} while (0) -#else -#define LOG_LEVEL RTE_LOG_INFO -#define LOG_DEBUG(log_type, fmt, args...) do{} while(0) -#endif +#include <sys/queue.h> /* Macros for printing using RTE_LOG */ #define RTE_LOGTYPE_VHOST_CONFIG RTE_LOGTYPE_USER1 #define RTE_LOGTYPE_VHOST_DATA RTE_LOGTYPE_USER2 #define RTE_LOGTYPE_VHOST_PORT RTE_LOGTYPE_USER3 -/** - * Information relating to memory regions including offsets to - * addresses in host physical space. - */ -struct virtio_memory_regions_hpa { - /**< Base guest physical address of region. */ - uint64_t guest_phys_address; - /**< End guest physical address of region. */ - uint64_t guest_phys_address_end; - /**< Size of region. */ - uint64_t memory_size; - /**< Offset of region for gpa to hpa translation. */ - uint64_t host_phys_addr_offset; +struct device_statistics { + uint64_t tx; + uint64_t tx_total; + rte_atomic64_t rx_atomic; + rte_atomic64_t rx_total_atomic; }; -/* - * Device linked list structure for data path. - */ struct vhost_dev { - /**< Pointer to device created by vhost lib. */ - struct virtio_net *dev; /**< Number of memory regions for gpa to hpa translation. */ uint32_t nregions_hpa; - /**< Memory region information for gpa to hpa translation. */ - struct virtio_memory_regions_hpa *regions_hpa; /**< Device MAC address (Obtained on first TX packet). */ struct ether_addr mac_address; /**< RX VMDQ queue number. */ @@ -88,28 +63,29 @@ struct vhost_dev { volatile uint8_t ready; /**< Device is marked for removal from the data core. */ volatile uint8_t remove; + + int vid; + struct device_statistics stats; + TAILQ_ENTRY(vhost_dev) global_vdev_entry; + TAILQ_ENTRY(vhost_dev) lcore_vdev_entry; } __rte_cache_aligned; -struct virtio_net_data_ll -{ - struct vhost_dev *vdev; /* Pointer to device created by configuration core. */ - struct virtio_net_data_ll *next; /* Pointer to next device in linked list. */ -}; +TAILQ_HEAD(vhost_dev_tailq_list, vhost_dev); + + +#define REQUEST_DEV_REMOVAL 1 +#define ACK_DEV_REMOVAL 0 /* * Structure containing data core specific information. */ -struct lcore_ll_info -{ - struct virtio_net_data_ll *ll_root_free; /* Pointer to head in free linked list. */ - struct virtio_net_data_ll *ll_root_used; /* Pointer to head of used linked list. */ - uint32_t device_num; /* Number of devices on lcore. */ - volatile uint8_t dev_removal_flag; /* Flag to synchronize device removal. */ -}; +struct lcore_info { + uint32_t device_num; + + /* Flag to synchronize device removal. */ + volatile uint8_t dev_removal_flag; -struct lcore_info -{ - struct lcore_ll_info *lcore_ll; /* Pointer to data core specific lcore_ll_info struct */ + struct vhost_dev_tailq_list vdev_list; }; #endif /* _MAIN_H_ */ |