New upstream version 18.05

Change-Id: Icd4170ddc4f63aeae5d0559490e5195b5349f9c2
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>

1 files changed, 1142 insertions, 0 deletions

diff --git a/kernel/linux/kni/ethtool/ixgbe/ixgbe_api.c b/kernel/linux/kni/ethtool/ixgbe/ixgbe_api.c
new file mode 100644
index 00000000..1be4c64f
--- /dev/null
+++ b/kernel/linux/kni/ethtool/ixgbe/ixgbe_api.c
@@ -0,0 +1,1142 @@
+// SPDX-License-Identifier: GPL-2.0
+/*******************************************************************************
+
+  Intel 10 Gigabit PCI Express Linux driver
+  Copyright(c) 1999 - 2012 Intel Corporation.
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "ixgbe_api.h"
+#include "ixgbe_common.h"
+
+/**
+ *  ixgbe_init_shared_code - Initialize the shared code
+ *  @hw: pointer to hardware structure
+ *
+ *  This will assign function pointers and assign the MAC type and PHY code.
+ *  Does not touch the hardware. This function must be called prior to any
+ *  other function in the shared code. The ixgbe_hw structure should be
+ *  memset to 0 prior to calling this function.  The following fields in
+ *  hw structure should be filled in prior to calling this function:
+ *  hw_addr, back, device_id, vendor_id, subsystem_device_id,
+ *  subsystem_vendor_id, and revision_id
+ **/
+s32 ixgbe_init_shared_code(struct ixgbe_hw *hw)
+{
+	s32 status;
+
+	/*
+	 * Set the mac type
+	 */
+	ixgbe_set_mac_type(hw);
+
+	switch (hw->mac.type) {
+	case ixgbe_mac_82598EB:
+		status = ixgbe_init_ops_82598(hw);
+		break;
+	case ixgbe_mac_82599EB:
+		status = ixgbe_init_ops_82599(hw);
+		break;
+	case ixgbe_mac_X540:
+		status = ixgbe_init_ops_X540(hw);
+		break;
+	default:
+		status = IXGBE_ERR_DEVICE_NOT_SUPPORTED;
+		break;
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_set_mac_type - Sets MAC type
+ *  @hw: pointer to the HW structure
+ *
+ *  This function sets the mac type of the adapter based on the
+ *  vendor ID and device ID stored in the hw structure.
+ **/
+s32 ixgbe_set_mac_type(struct ixgbe_hw *hw)
+{
+	s32 ret_val = 0;
+
+	if (hw->vendor_id == IXGBE_INTEL_VENDOR_ID) {
+		switch (hw->device_id) {
+		case IXGBE_DEV_ID_82598:
+		case IXGBE_DEV_ID_82598_BX:
+		case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
+		case IXGBE_DEV_ID_82598AF_DUAL_PORT:
+		case IXGBE_DEV_ID_82598AT:
+		case IXGBE_DEV_ID_82598AT2:
+		case IXGBE_DEV_ID_82598EB_CX4:
+		case IXGBE_DEV_ID_82598_CX4_DUAL_PORT:
+		case IXGBE_DEV_ID_82598_DA_DUAL_PORT:
+		case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM:
+		case IXGBE_DEV_ID_82598EB_XF_LR:
+		case IXGBE_DEV_ID_82598EB_SFP_LOM:
+			hw->mac.type = ixgbe_mac_82598EB;
+			break;
+		case IXGBE_DEV_ID_82599_KX4:
+		case IXGBE_DEV_ID_82599_KX4_MEZZ:
+		case IXGBE_DEV_ID_82599_XAUI_LOM:
+		case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
+		case IXGBE_DEV_ID_82599_KR:
+		case IXGBE_DEV_ID_82599_SFP:
+		case IXGBE_DEV_ID_82599_BACKPLANE_FCOE:
+		case IXGBE_DEV_ID_82599_SFP_FCOE:
+		case IXGBE_DEV_ID_82599_SFP_EM:
+		case IXGBE_DEV_ID_82599_SFP_SF2:
+		case IXGBE_DEV_ID_82599_QSFP_SF_QP:
+		case IXGBE_DEV_ID_82599EN_SFP:
+		case IXGBE_DEV_ID_82599_CX4:
+		case IXGBE_DEV_ID_82599_LS:
+		case IXGBE_DEV_ID_82599_T3_LOM:
+			hw->mac.type = ixgbe_mac_82599EB;
+			break;
+		case IXGBE_DEV_ID_X540T:
+			hw->mac.type = ixgbe_mac_X540;
+			break;
+		default:
+			ret_val = IXGBE_ERR_DEVICE_NOT_SUPPORTED;
+			break;
+		}
+	} else {
+		ret_val = IXGBE_ERR_DEVICE_NOT_SUPPORTED;
+	}
+
+	hw_dbg(hw, "ixgbe_set_mac_type found mac: %d, returns: %d\n",
+		  hw->mac.type, ret_val);
+	return ret_val;
+}
+
+/**
+ *  ixgbe_init_hw - Initialize the hardware
+ *  @hw: pointer to hardware structure
+ *
+ *  Initialize the hardware by resetting and then starting the hardware
+ **/
+s32 ixgbe_init_hw(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.init_hw, (hw),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_reset_hw - Performs a hardware reset
+ *  @hw: pointer to hardware structure
+ *
+ *  Resets the hardware by resetting the transmit and receive units, masks and
+ *  clears all interrupts, performs a PHY reset, and performs a MAC reset
+ **/
+s32 ixgbe_reset_hw(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.reset_hw, (hw),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_start_hw - Prepares hardware for Rx/Tx
+ *  @hw: pointer to hardware structure
+ *
+ *  Starts the hardware by filling the bus info structure and media type,
+ *  clears all on chip counters, initializes receive address registers,
+ *  multicast table, VLAN filter table, calls routine to setup link and
+ *  flow control settings, and leaves transmit and receive units disabled
+ *  and uninitialized.
+ **/
+s32 ixgbe_start_hw(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.start_hw, (hw),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_clear_hw_cntrs - Clear hardware counters
+ *  @hw: pointer to hardware structure
+ *
+ *  Clears all hardware statistics counters by reading them from the hardware
+ *  Statistics counters are clear on read.
+ **/
+s32 ixgbe_clear_hw_cntrs(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.clear_hw_cntrs, (hw),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_get_media_type - Get media type
+ *  @hw: pointer to hardware structure
+ *
+ *  Returns the media type (fiber, copper, backplane)
+ **/
+enum ixgbe_media_type ixgbe_get_media_type(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.get_media_type, (hw),
+			       ixgbe_media_type_unknown);
+}
+
+/**
+ *  ixgbe_get_mac_addr - Get MAC address
+ *  @hw: pointer to hardware structure
+ *  @mac_addr: Adapter MAC address
+ *
+ *  Reads the adapter's MAC address from the first Receive Address Register
+ *  (RAR0) A reset of the adapter must have been performed prior to calling
+ *  this function in order for the MAC address to have been loaded from the
+ *  EEPROM into RAR0
+ **/
+s32 ixgbe_get_mac_addr(struct ixgbe_hw *hw, u8 *mac_addr)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.get_mac_addr,
+			       (hw, mac_addr), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_get_san_mac_addr - Get SAN MAC address
+ *  @hw: pointer to hardware structure
+ *  @san_mac_addr: SAN MAC address
+ *
+ *  Reads the SAN MAC address from the EEPROM, if it's available.  This is
+ *  per-port, so set_lan_id() must be called before reading the addresses.
+ **/
+s32 ixgbe_get_san_mac_addr(struct ixgbe_hw *hw, u8 *san_mac_addr)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.get_san_mac_addr,
+			       (hw, san_mac_addr), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_set_san_mac_addr - Write a SAN MAC address
+ *  @hw: pointer to hardware structure
+ *  @san_mac_addr: SAN MAC address
+ *
+ *  Writes A SAN MAC address to the EEPROM.
+ **/
+s32 ixgbe_set_san_mac_addr(struct ixgbe_hw *hw, u8 *san_mac_addr)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.set_san_mac_addr,
+			       (hw, san_mac_addr), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_get_device_caps - Get additional device capabilities
+ *  @hw: pointer to hardware structure
+ *  @device_caps: the EEPROM word for device capabilities
+ *
+ *  Reads the extra device capabilities from the EEPROM
+ **/
+s32 ixgbe_get_device_caps(struct ixgbe_hw *hw, u16 *device_caps)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.get_device_caps,
+			       (hw, device_caps), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_get_wwn_prefix - Get alternative WWNN/WWPN prefix from the EEPROM
+ *  @hw: pointer to hardware structure
+ *  @wwnn_prefix: the alternative WWNN prefix
+ *  @wwpn_prefix: the alternative WWPN prefix
+ *
+ *  This function will read the EEPROM from the alternative SAN MAC address
+ *  block to check the support for the alternative WWNN/WWPN prefix support.
+ **/
+s32 ixgbe_get_wwn_prefix(struct ixgbe_hw *hw, u16 *wwnn_prefix,
+			 u16 *wwpn_prefix)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.get_wwn_prefix,
+			       (hw, wwnn_prefix, wwpn_prefix),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_get_fcoe_boot_status -  Get FCOE boot status from EEPROM
+ *  @hw: pointer to hardware structure
+ *  @bs: the fcoe boot status
+ *
+ *  This function will read the FCOE boot status from the iSCSI FCOE block
+ **/
+s32 ixgbe_get_fcoe_boot_status(struct ixgbe_hw *hw, u16 *bs)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.get_fcoe_boot_status,
+			       (hw, bs),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_get_bus_info - Set PCI bus info
+ *  @hw: pointer to hardware structure
+ *
+ *  Sets the PCI bus info (speed, width, type) within the ixgbe_hw structure
+ **/
+s32 ixgbe_get_bus_info(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.get_bus_info, (hw),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_get_num_of_tx_queues - Get Tx queues
+ *  @hw: pointer to hardware structure
+ *
+ *  Returns the number of transmit queues for the given adapter.
+ **/
+u32 ixgbe_get_num_of_tx_queues(struct ixgbe_hw *hw)
+{
+	return hw->mac.max_tx_queues;
+}
+
+/**
+ *  ixgbe_get_num_of_rx_queues - Get Rx queues
+ *  @hw: pointer to hardware structure
+ *
+ *  Returns the number of receive queues for the given adapter.
+ **/
+u32 ixgbe_get_num_of_rx_queues(struct ixgbe_hw *hw)
+{
+	return hw->mac.max_rx_queues;
+}
+
+/**
+ *  ixgbe_stop_adapter - Disable Rx/Tx units
+ *  @hw: pointer to hardware structure
+ *
+ *  Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts,
+ *  disables transmit and receive units. The adapter_stopped flag is used by
+ *  the shared code and drivers to determine if the adapter is in a stopped
+ *  state and should not touch the hardware.
+ **/
+s32 ixgbe_stop_adapter(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.stop_adapter, (hw),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_read_pba_string - Reads part number string from EEPROM
+ *  @hw: pointer to hardware structure
+ *  @pba_num: stores the part number string from the EEPROM
+ *  @pba_num_size: part number string buffer length
+ *
+ *  Reads the part number string from the EEPROM.
+ **/
+s32 ixgbe_read_pba_string(struct ixgbe_hw *hw, u8 *pba_num, u32 pba_num_size)
+{
+	return ixgbe_read_pba_string_generic(hw, pba_num, pba_num_size);
+}
+
+/**
+ *  ixgbe_identify_phy - Get PHY type
+ *  @hw: pointer to hardware structure
+ *
+ *  Determines the physical layer module found on the current adapter.
+ **/
+s32 ixgbe_identify_phy(struct ixgbe_hw *hw)
+{
+	s32 status = 0;
+
+	if (hw->phy.type == ixgbe_phy_unknown) {
+		status = ixgbe_call_func(hw, hw->phy.ops.identify, (hw),
+					 IXGBE_NOT_IMPLEMENTED);
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_reset_phy - Perform a PHY reset
+ *  @hw: pointer to hardware structure
+ **/
+s32 ixgbe_reset_phy(struct ixgbe_hw *hw)
+{
+	s32 status = 0;
+
+	if (hw->phy.type == ixgbe_phy_unknown) {
+		if (ixgbe_identify_phy(hw) != 0)
+			status = IXGBE_ERR_PHY;
+	}
+
+	if (status == 0) {
+		status = ixgbe_call_func(hw, hw->phy.ops.reset, (hw),
+					 IXGBE_NOT_IMPLEMENTED);
+	}
+	return status;
+}
+
+/**
+ *  ixgbe_get_phy_firmware_version -
+ *  @hw: pointer to hardware structure
+ *  @firmware_version: pointer to firmware version
+ **/
+s32 ixgbe_get_phy_firmware_version(struct ixgbe_hw *hw, u16 *firmware_version)
+{
+	s32 status = 0;
+
+	status = ixgbe_call_func(hw, hw->phy.ops.get_firmware_version,
+				 (hw, firmware_version),
+				 IXGBE_NOT_IMPLEMENTED);
+	return status;
+}
+
+/**
+ *  ixgbe_read_phy_reg - Read PHY register
+ *  @hw: pointer to hardware structure
+ *  @reg_addr: 32 bit address of PHY register to read
+ *  @phy_data: Pointer to read data from PHY register
+ *
+ *  Reads a value from a specified PHY register
+ **/
+s32 ixgbe_read_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
+		       u16 *phy_data)
+{
+	if (hw->phy.id == 0)
+		ixgbe_identify_phy(hw);
+
+	return ixgbe_call_func(hw, hw->phy.ops.read_reg, (hw, reg_addr,
+			       device_type, phy_data), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_write_phy_reg - Write PHY register
+ *  @hw: pointer to hardware structure
+ *  @reg_addr: 32 bit PHY register to write
+ *  @phy_data: Data to write to the PHY register
+ *
+ *  Writes a value to specified PHY register
+ **/
+s32 ixgbe_write_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
+			u16 phy_data)
+{
+	if (hw->phy.id == 0)
+		ixgbe_identify_phy(hw);
+
+	return ixgbe_call_func(hw, hw->phy.ops.write_reg, (hw, reg_addr,
+			       device_type, phy_data), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_setup_phy_link - Restart PHY autoneg
+ *  @hw: pointer to hardware structure
+ *
+ *  Restart autonegotiation and PHY and waits for completion.
+ **/
+s32 ixgbe_setup_phy_link(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->phy.ops.setup_link, (hw),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_check_phy_link - Determine link and speed status
+ *  @hw: pointer to hardware structure
+ *
+ *  Reads a PHY register to determine if link is up and the current speed for
+ *  the PHY.
+ **/
+s32 ixgbe_check_phy_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+			 bool *link_up)
+{
+	return ixgbe_call_func(hw, hw->phy.ops.check_link, (hw, speed,
+			       link_up), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_setup_phy_link_speed - Set auto advertise
+ *  @hw: pointer to hardware structure
+ *  @speed: new link speed
+ *  @autoneg: true if autonegotiation enabled
+ *
+ *  Sets the auto advertised capabilities
+ **/
+s32 ixgbe_setup_phy_link_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed,
+			       bool autoneg,
+			       bool autoneg_wait_to_complete)
+{
+	return ixgbe_call_func(hw, hw->phy.ops.setup_link_speed, (hw, speed,
+			       autoneg, autoneg_wait_to_complete),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_check_link - Get link and speed status
+ *  @hw: pointer to hardware structure
+ *
+ *  Reads the links register to determine if link is up and the current speed
+ **/
+s32 ixgbe_check_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+		     bool *link_up, bool link_up_wait_to_complete)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.check_link, (hw, speed,
+			       link_up, link_up_wait_to_complete),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_disable_tx_laser - Disable Tx laser
+ *  @hw: pointer to hardware structure
+ *
+ *  If the driver needs to disable the laser on SFI optics.
+ **/
+void ixgbe_disable_tx_laser(struct ixgbe_hw *hw)
+{
+	if (hw->mac.ops.disable_tx_laser)
+		hw->mac.ops.disable_tx_laser(hw);
+}
+
+/**
+ *  ixgbe_enable_tx_laser - Enable Tx laser
+ *  @hw: pointer to hardware structure
+ *
+ *  If the driver needs to enable the laser on SFI optics.
+ **/
+void ixgbe_enable_tx_laser(struct ixgbe_hw *hw)
+{
+	if (hw->mac.ops.enable_tx_laser)
+		hw->mac.ops.enable_tx_laser(hw);
+}
+
+/**
+ *  ixgbe_flap_tx_laser - flap Tx laser to start autotry process
+ *  @hw: pointer to hardware structure
+ *
+ *  When the driver changes the link speeds that it can support then
+ *  flap the tx laser to alert the link partner to start autotry
+ *  process on its end.
+ **/
+void ixgbe_flap_tx_laser(struct ixgbe_hw *hw)
+{
+	if (hw->mac.ops.flap_tx_laser)
+		hw->mac.ops.flap_tx_laser(hw);
+}
+
+/**
+ *  ixgbe_setup_link - Set link speed
+ *  @hw: pointer to hardware structure
+ *  @speed: new link speed
+ *  @autoneg: true if autonegotiation enabled
+ *
+ *  Configures link settings.  Restarts the link.
+ *  Performs autonegotiation if needed.
+ **/
+s32 ixgbe_setup_link(struct ixgbe_hw *hw, ixgbe_link_speed speed,
+		     bool autoneg,
+		     bool autoneg_wait_to_complete)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.setup_link, (hw, speed,
+			       autoneg, autoneg_wait_to_complete),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_get_link_capabilities - Returns link capabilities
+ *  @hw: pointer to hardware structure
+ *
+ *  Determines the link capabilities of the current configuration.
+ **/
+s32 ixgbe_get_link_capabilities(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+				bool *autoneg)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.get_link_capabilities, (hw,
+			       speed, autoneg), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_led_on - Turn on LEDs
+ *  @hw: pointer to hardware structure
+ *  @index: led number to turn on
+ *
+ *  Turns on the software controllable LEDs.
+ **/
+s32 ixgbe_led_on(struct ixgbe_hw *hw, u32 index)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.led_on, (hw, index),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_led_off - Turn off LEDs
+ *  @hw: pointer to hardware structure
+ *  @index: led number to turn off
+ *
+ *  Turns off the software controllable LEDs.
+ **/
+s32 ixgbe_led_off(struct ixgbe_hw *hw, u32 index)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.led_off, (hw, index),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_blink_led_start - Blink LEDs
+ *  @hw: pointer to hardware structure
+ *  @index: led number to blink
+ *
+ *  Blink LED based on index.
+ **/
+s32 ixgbe_blink_led_start(struct ixgbe_hw *hw, u32 index)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.blink_led_start, (hw, index),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_blink_led_stop - Stop blinking LEDs
+ *  @hw: pointer to hardware structure
+ *
+ *  Stop blinking LED based on index.
+ **/
+s32 ixgbe_blink_led_stop(struct ixgbe_hw *hw, u32 index)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.blink_led_stop, (hw, index),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_init_eeprom_params - Initialize EEPROM parameters
+ *  @hw: pointer to hardware structure
+ *
+ *  Initializes the EEPROM parameters ixgbe_eeprom_info within the
+ *  ixgbe_hw struct in order to set up EEPROM access.
+ **/
+s32 ixgbe_init_eeprom_params(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->eeprom.ops.init_params, (hw),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+
+/**
+ *  ixgbe_write_eeprom - Write word to EEPROM
+ *  @hw: pointer to hardware structure
+ *  @offset: offset within the EEPROM to be written to
+ *  @data: 16 bit word to be written to the EEPROM
+ *
+ *  Writes 16 bit value to EEPROM. If ixgbe_eeprom_update_checksum is not
+ *  called after this function, the EEPROM will most likely contain an
+ *  invalid checksum.
+ **/
+s32 ixgbe_write_eeprom(struct ixgbe_hw *hw, u16 offset, u16 data)
+{
+	return ixgbe_call_func(hw, hw->eeprom.ops.write, (hw, offset, data),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_write_eeprom_buffer - Write word(s) to EEPROM
+ *  @hw: pointer to hardware structure
+ *  @offset: offset within the EEPROM to be written to
+ *  @data: 16 bit word(s) to be written to the EEPROM
+ *  @words: number of words
+ *
+ *  Writes 16 bit word(s) to EEPROM. If ixgbe_eeprom_update_checksum is not
+ *  called after this function, the EEPROM will most likely contain an
+ *  invalid checksum.
+ **/
+s32 ixgbe_write_eeprom_buffer(struct ixgbe_hw *hw, u16 offset, u16 words,
+			      u16 *data)
+{
+	return ixgbe_call_func(hw, hw->eeprom.ops.write_buffer,
+			       (hw, offset, words, data),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_read_eeprom - Read word from EEPROM
+ *  @hw: pointer to hardware structure
+ *  @offset: offset within the EEPROM to be read
+ *  @data: read 16 bit value from EEPROM
+ *
+ *  Reads 16 bit value from EEPROM
+ **/
+s32 ixgbe_read_eeprom(struct ixgbe_hw *hw, u16 offset, u16 *data)
+{
+	return ixgbe_call_func(hw, hw->eeprom.ops.read, (hw, offset, data),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_read_eeprom_buffer - Read word(s) from EEPROM
+ *  @hw: pointer to hardware structure
+ *  @offset: offset within the EEPROM to be read
+ *  @data: read 16 bit word(s) from EEPROM
+ *  @words: number of words
+ *
+ *  Reads 16 bit word(s) from EEPROM
+ **/
+s32 ixgbe_read_eeprom_buffer(struct ixgbe_hw *hw, u16 offset,
+			     u16 words, u16 *data)
+{
+	return ixgbe_call_func(hw, hw->eeprom.ops.read_buffer,
+			       (hw, offset, words, data),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_validate_eeprom_checksum - Validate EEPROM checksum
+ *  @hw: pointer to hardware structure
+ *  @checksum_val: calculated checksum
+ *
+ *  Performs checksum calculation and validates the EEPROM checksum
+ **/
+s32 ixgbe_validate_eeprom_checksum(struct ixgbe_hw *hw, u16 *checksum_val)
+{
+	return ixgbe_call_func(hw, hw->eeprom.ops.validate_checksum,
+			       (hw, checksum_val), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_eeprom_update_checksum - Updates the EEPROM checksum
+ *  @hw: pointer to hardware structure
+ **/
+s32 ixgbe_update_eeprom_checksum(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->eeprom.ops.update_checksum, (hw),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_insert_mac_addr - Find a RAR for this mac address
+ *  @hw: pointer to hardware structure
+ *  @addr: Address to put into receive address register
+ *  @vmdq: VMDq pool to assign
+ *
+ *  Puts an ethernet address into a receive address register, or
+ *  finds the rar that it is already in; adds to the pool list
+ **/
+s32 ixgbe_insert_mac_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.insert_mac_addr,
+			       (hw, addr, vmdq),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_set_rar - Set Rx address register
+ *  @hw: pointer to hardware structure
+ *  @index: Receive address register to write
+ *  @addr: Address to put into receive address register
+ *  @vmdq: VMDq "set"
+ *  @enable_addr: set flag that address is active
+ *
+ *  Puts an ethernet address into a receive address register.
+ **/
+s32 ixgbe_set_rar(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
+		  u32 enable_addr)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.set_rar, (hw, index, addr, vmdq,
+			       enable_addr), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_clear_rar - Clear Rx address register
+ *  @hw: pointer to hardware structure
+ *  @index: Receive address register to write
+ *
+ *  Puts an ethernet address into a receive address register.
+ **/
+s32 ixgbe_clear_rar(struct ixgbe_hw *hw, u32 index)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.clear_rar, (hw, index),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_set_vmdq - Associate a VMDq index with a receive address
+ *  @hw: pointer to hardware structure
+ *  @rar: receive address register index to associate with VMDq index
+ *  @vmdq: VMDq set or pool index
+ **/
+s32 ixgbe_set_vmdq(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.set_vmdq, (hw, rar, vmdq),
+			       IXGBE_NOT_IMPLEMENTED);
+
+}
+
+/**
+ *  ixgbe_set_vmdq_san_mac - Associate VMDq index 127 with a receive address
+ *  @hw: pointer to hardware structure
+ *  @vmdq: VMDq default pool index
+ **/
+s32 ixgbe_set_vmdq_san_mac(struct ixgbe_hw *hw, u32 vmdq)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.set_vmdq_san_mac,
+			       (hw, vmdq), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_clear_vmdq - Disassociate a VMDq index from a receive address
+ *  @hw: pointer to hardware structure
+ *  @rar: receive address register index to disassociate with VMDq index
+ *  @vmdq: VMDq set or pool index
+ **/
+s32 ixgbe_clear_vmdq(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.clear_vmdq, (hw, rar, vmdq),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_init_rx_addrs - Initializes receive address filters.
+ *  @hw: pointer to hardware structure
+ *
+ *  Places the MAC address in receive address register 0 and clears the rest
+ *  of the receive address registers. Clears the multicast table. Assumes
+ *  the receiver is in reset when the routine is called.
+ **/
+s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.init_rx_addrs, (hw),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_get_num_rx_addrs - Returns the number of RAR entries.
+ *  @hw: pointer to hardware structure
+ **/
+u32 ixgbe_get_num_rx_addrs(struct ixgbe_hw *hw)
+{
+	return hw->mac.num_rar_entries;
+}
+
+/**
+ *  ixgbe_update_uc_addr_list - Updates the MAC's list of secondary addresses
+ *  @hw: pointer to hardware structure
+ *  @addr_list: the list of new multicast addresses
+ *  @addr_count: number of addresses
+ *  @func: iterator function to walk the multicast address list
+ *
+ *  The given list replaces any existing list. Clears the secondary addrs from
+ *  receive address registers. Uses unused receive address registers for the
+ *  first secondary addresses, and falls back to promiscuous mode as needed.
+ **/
+s32 ixgbe_update_uc_addr_list(struct ixgbe_hw *hw, u8 *addr_list,
+			      u32 addr_count, ixgbe_mc_addr_itr func)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.update_uc_addr_list, (hw,
+			       addr_list, addr_count, func),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_update_mc_addr_list - Updates the MAC's list of multicast addresses
+ *  @hw: pointer to hardware structure
+ *  @mc_addr_list: the list of new multicast addresses
+ *  @mc_addr_count: number of addresses
+ *  @func: iterator function to walk the multicast address list
+ *
+ *  The given list replaces any existing list. Clears the MC addrs from receive
+ *  address registers and the multicast table. Uses unused receive address
+ *  registers for the first multicast addresses, and hashes the rest into the
+ *  multicast table.
+ **/
+s32 ixgbe_update_mc_addr_list(struct ixgbe_hw *hw, u8 *mc_addr_list,
+			      u32 mc_addr_count, ixgbe_mc_addr_itr func,
+			      bool clear)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.update_mc_addr_list, (hw,
+			       mc_addr_list, mc_addr_count, func, clear),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_enable_mc - Enable multicast address in RAR
+ *  @hw: pointer to hardware structure
+ *
+ *  Enables multicast address in RAR and the use of the multicast hash table.
+ **/
+s32 ixgbe_enable_mc(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.enable_mc, (hw),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_disable_mc - Disable multicast address in RAR
+ *  @hw: pointer to hardware structure
+ *
+ *  Disables multicast address in RAR and the use of the multicast hash table.
+ **/
+s32 ixgbe_disable_mc(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.disable_mc, (hw),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_clear_vfta - Clear VLAN filter table
+ *  @hw: pointer to hardware structure
+ *
+ *  Clears the VLAN filer table, and the VMDq index associated with the filter
+ **/
+s32 ixgbe_clear_vfta(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.clear_vfta, (hw),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_set_vfta - Set VLAN filter table
+ *  @hw: pointer to hardware structure
+ *  @vlan: VLAN id to write to VLAN filter
+ *  @vind: VMDq output index that maps queue to VLAN id in VFTA
+ *  @vlan_on: boolean flag to turn on/off VLAN in VFTA
+ *
+ *  Turn on/off specified VLAN in the VLAN filter table.
+ **/
+s32 ixgbe_set_vfta(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.set_vfta, (hw, vlan, vind,
+			       vlan_on), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_set_vlvf - Set VLAN Pool Filter
+ *  @hw: pointer to hardware structure
+ *  @vlan: VLAN id to write to VLAN filter
+ *  @vind: VMDq output index that maps queue to VLAN id in VFVFB
+ *  @vlan_on: boolean flag to turn on/off VLAN in VFVF
+ *  @vfta_changed: pointer to boolean flag which indicates whether VFTA
+ *                 should be changed
+ *
+ *  Turn on/off specified bit in VLVF table.
+ **/
+s32 ixgbe_set_vlvf(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on,
+		    bool *vfta_changed)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.set_vlvf, (hw, vlan, vind,
+			       vlan_on, vfta_changed), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_fc_enable - Enable flow control
+ *  @hw: pointer to hardware structure
+ *
+ *  Configures the flow control settings based on SW configuration.
+ **/
+s32 ixgbe_fc_enable(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.fc_enable, (hw),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_set_fw_drv_ver - Try to send the driver version number FW
+ * @hw: pointer to hardware structure
+ * @maj: driver major number to be sent to firmware
+ * @min: driver minor number to be sent to firmware
+ * @build: driver build number to be sent to firmware
+ * @ver: driver version number to be sent to firmware
+ **/
+s32 ixgbe_set_fw_drv_ver(struct ixgbe_hw *hw, u8 maj, u8 min, u8 build,
+			 u8 ver)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.set_fw_drv_ver, (hw, maj, min,
+			       build, ver), IXGBE_NOT_IMPLEMENTED);
+}
+
+
+/**
+ *  ixgbe_get_thermal_sensor_data - Gathers thermal sensor data
+ *  @hw: pointer to hardware structure
+ *
+ *  Updates the temperatures in mac.thermal_sensor_data
+ **/
+s32 ixgbe_get_thermal_sensor_data(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.get_thermal_sensor_data, (hw),
+				IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_init_thermal_sensor_thresh - Inits thermal sensor thresholds
+ *  @hw: pointer to hardware structure
+ *
+ *  Inits the thermal sensor thresholds according to the NVM map
+ **/
+s32 ixgbe_init_thermal_sensor_thresh(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.init_thermal_sensor_thresh, (hw),
+				IXGBE_NOT_IMPLEMENTED);
+}
+/**
+ *  ixgbe_read_analog_reg8 - Reads 8 bit analog register
+ *  @hw: pointer to hardware structure
+ *  @reg: analog register to read
+ *  @val: read value
+ *
+ *  Performs write operation to analog register specified.
+ **/
+s32 ixgbe_read_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 *val)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.read_analog_reg8, (hw, reg,
+			       val), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_write_analog_reg8 - Writes 8 bit analog register
+ *  @hw: pointer to hardware structure
+ *  @reg: analog register to write
+ *  @val: value to write
+ *
+ *  Performs write operation to Atlas analog register specified.
+ **/
+s32 ixgbe_write_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 val)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.write_analog_reg8, (hw, reg,
+			       val), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_init_uta_tables - Initializes Unicast Table Arrays.
+ *  @hw: pointer to hardware structure
+ *
+ *  Initializes the Unicast Table Arrays to zero on device load.  This
+ *  is part of the Rx init addr execution path.
+ **/
+s32 ixgbe_init_uta_tables(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.init_uta_tables, (hw),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_read_i2c_byte - Reads 8 bit word over I2C at specified device address
+ *  @hw: pointer to hardware structure
+ *  @byte_offset: byte offset to read
+ *  @data: value read
+ *
+ *  Performs byte read operation to SFP module's EEPROM over I2C interface.
+ **/
+s32 ixgbe_read_i2c_byte(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr,
+			u8 *data)
+{
+	return ixgbe_call_func(hw, hw->phy.ops.read_i2c_byte, (hw, byte_offset,
+			       dev_addr, data), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_write_i2c_byte - Writes 8 bit word over I2C
+ *  @hw: pointer to hardware structure
+ *  @byte_offset: byte offset to write
+ *  @data: value to write
+ *
+ *  Performs byte write operation to SFP module's EEPROM over I2C interface
+ *  at a specified device address.
+ **/
+s32 ixgbe_write_i2c_byte(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr,
+			 u8 data)
+{
+	return ixgbe_call_func(hw, hw->phy.ops.write_i2c_byte, (hw, byte_offset,
+			       dev_addr, data), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_write_i2c_eeprom - Writes 8 bit EEPROM word over I2C interface
+ *  @hw: pointer to hardware structure
+ *  @byte_offset: EEPROM byte offset to write
+ *  @eeprom_data: value to write
+ *
+ *  Performs byte write operation to SFP module's EEPROM over I2C interface.
+ **/
+s32 ixgbe_write_i2c_eeprom(struct ixgbe_hw *hw,
+			   u8 byte_offset, u8 eeprom_data)
+{
+	return ixgbe_call_func(hw, hw->phy.ops.write_i2c_eeprom,
+			       (hw, byte_offset, eeprom_data),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_read_i2c_eeprom - Reads 8 bit EEPROM word over I2C interface
+ *  @hw: pointer to hardware structure
+ *  @byte_offset: EEPROM byte offset to read
+ *  @eeprom_data: value read
+ *
+ *  Performs byte read operation to SFP module's EEPROM over I2C interface.
+ **/
+s32 ixgbe_read_i2c_eeprom(struct ixgbe_hw *hw, u8 byte_offset, u8 *eeprom_data)
+{
+	return ixgbe_call_func(hw, hw->phy.ops.read_i2c_eeprom,
+			      (hw, byte_offset, eeprom_data),
+			      IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_get_supported_physical_layer - Returns physical layer type
+ *  @hw: pointer to hardware structure
+ *
+ *  Determines physical layer capabilities of the current configuration.
+ **/
+u32 ixgbe_get_supported_physical_layer(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.get_supported_physical_layer,
+			       (hw), IXGBE_PHYSICAL_LAYER_UNKNOWN);
+}
+
+/**
+ *  ixgbe_enable_rx_dma - Enables Rx DMA unit, dependent on device specifics
+ *  @hw: pointer to hardware structure
+ *  @regval: bitfield to write to the Rx DMA register
+ *
+ *  Enables the Rx DMA unit of the device.
+ **/
+s32 ixgbe_enable_rx_dma(struct ixgbe_hw *hw, u32 regval)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.enable_rx_dma,
+			       (hw, regval), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_disable_sec_rx_path - Stops the receive data path
+ *  @hw: pointer to hardware structure
+ *
+ *  Stops the receive data path.
+ **/
+s32 ixgbe_disable_sec_rx_path(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.disable_sec_rx_path,
+				(hw), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_enable_sec_rx_path - Enables the receive data path
+ *  @hw: pointer to hardware structure
+ *
+ *  Enables the receive data path.
+ **/
+s32 ixgbe_enable_sec_rx_path(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.enable_sec_rx_path,
+				(hw), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_acquire_swfw_semaphore - Acquire SWFW semaphore
+ *  @hw: pointer to hardware structure
+ *  @mask: Mask to specify which semaphore to acquire
+ *
+ *  Acquires the SWFW semaphore through SW_FW_SYNC register for the specified
+ *  function (CSR, PHY0, PHY1, EEPROM, Flash)
+ **/
+s32 ixgbe_acquire_swfw_semaphore(struct ixgbe_hw *hw, u16 mask)
+{
+	return ixgbe_call_func(hw, hw->mac.ops.acquire_swfw_sync,
+			       (hw, mask), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_release_swfw_semaphore - Release SWFW semaphore
+ *  @hw: pointer to hardware structure
+ *  @mask: Mask to specify which semaphore to release
+ *
+ *  Releases the SWFW semaphore through SW_FW_SYNC register for the specified
+ *  function (CSR, PHY0, PHY1, EEPROM, Flash)
+ **/
+void ixgbe_release_swfw_semaphore(struct ixgbe_hw *hw, u16 mask)
+{
+	if (hw->mac.ops.release_swfw_sync)
+		hw->mac.ops.release_swfw_sync(hw, mask);
+}