diff options
author | 2016-07-18 15:30:06 -0300 | |
---|---|---|
committer | 2016-07-18 15:30:30 -0300 | |
commit | a41e6ff15809d40e0f9bbc9576bf8f7f80fbec1d (patch) | |
tree | c9e6fc399c2738e84ed2585e6e51e90f9608ca12 /lib/librte_eal/linuxapp/eal/eal_vfio.c | |
parent | 8b25d1ad5d2264bdfc2818c7bda74ee2697df6db (diff) |
Imported Upstream version 16.07-rc2
Change-Id: Ie9e8ec528a2a0dace085c5e44aa7fa3b489d4ba0
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Diffstat (limited to 'lib/librte_eal/linuxapp/eal/eal_vfio.c')
-rw-r--r-- | lib/librte_eal/linuxapp/eal/eal_vfio.c | 547 |
1 files changed, 547 insertions, 0 deletions
diff --git a/lib/librte_eal/linuxapp/eal/eal_vfio.c b/lib/librte_eal/linuxapp/eal/eal_vfio.c new file mode 100644 index 00000000..fcb0ab38 --- /dev/null +++ b/lib/librte_eal/linuxapp/eal/eal_vfio.c @@ -0,0 +1,547 @@ +/*- + * BSD LICENSE + * + * Copyright(c) 2010-2014 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <string.h> +#include <fcntl.h> +#include <unistd.h> +#include <sys/ioctl.h> + +#include <rte_log.h> +#include <rte_memory.h> +#include <rte_eal_memconfig.h> + +#include "eal_filesystem.h" +#include "eal_vfio.h" +#include "eal_private.h" + +#ifdef VFIO_PRESENT + +/* per-process VFIO config */ +static struct vfio_config vfio_cfg; + +static int vfio_type1_dma_map(int); +static int vfio_noiommu_dma_map(int); + +/* IOMMU types we support */ +static const struct vfio_iommu_type iommu_types[] = { + /* x86 IOMMU, otherwise known as type 1 */ + { RTE_VFIO_TYPE1, "Type 1", &vfio_type1_dma_map}, + /* IOMMU-less mode */ + { RTE_VFIO_NOIOMMU, "No-IOMMU", &vfio_noiommu_dma_map}, +}; + +int +vfio_get_group_fd(int iommu_group_no) +{ + int i; + int vfio_group_fd; + char filename[PATH_MAX]; + + /* check if we already have the group descriptor open */ + for (i = 0; i < vfio_cfg.vfio_group_idx; i++) + if (vfio_cfg.vfio_groups[i].group_no == iommu_group_no) + return vfio_cfg.vfio_groups[i].fd; + + /* if primary, try to open the group */ + if (internal_config.process_type == RTE_PROC_PRIMARY) { + /* try regular group format */ + snprintf(filename, sizeof(filename), + VFIO_GROUP_FMT, iommu_group_no); + vfio_group_fd = open(filename, O_RDWR); + if (vfio_group_fd < 0) { + /* if file not found, it's not an error */ + if (errno != ENOENT) { + RTE_LOG(ERR, EAL, "Cannot open %s: %s\n", filename, + strerror(errno)); + return -1; + } + + /* special case: try no-IOMMU path as well */ + snprintf(filename, sizeof(filename), + VFIO_NOIOMMU_GROUP_FMT, iommu_group_no); + vfio_group_fd = open(filename, O_RDWR); + if (vfio_group_fd < 0) { + if (errno != ENOENT) { + RTE_LOG(ERR, EAL, "Cannot open %s: %s\n", filename, + strerror(errno)); + return -1; + } + return 0; + } + /* noiommu group found */ + } + + /* if the fd is valid, create a new group for it */ + if (vfio_cfg.vfio_group_idx == VFIO_MAX_GROUPS) { + RTE_LOG(ERR, EAL, "Maximum number of VFIO groups reached!\n"); + close(vfio_group_fd); + return -1; + } + vfio_cfg.vfio_groups[vfio_cfg.vfio_group_idx].group_no = iommu_group_no; + vfio_cfg.vfio_groups[vfio_cfg.vfio_group_idx].fd = vfio_group_fd; + return vfio_group_fd; + } + /* if we're in a secondary process, request group fd from the primary + * process via our socket + */ + else { + int socket_fd, ret; + + socket_fd = vfio_mp_sync_connect_to_primary(); + + if (socket_fd < 0) { + RTE_LOG(ERR, EAL, " cannot connect to primary process!\n"); + return -1; + } + if (vfio_mp_sync_send_request(socket_fd, SOCKET_REQ_GROUP) < 0) { + RTE_LOG(ERR, EAL, " cannot request container fd!\n"); + close(socket_fd); + return -1; + } + if (vfio_mp_sync_send_request(socket_fd, iommu_group_no) < 0) { + RTE_LOG(ERR, EAL, " cannot send group number!\n"); + close(socket_fd); + return -1; + } + ret = vfio_mp_sync_receive_request(socket_fd); + switch (ret) { + case SOCKET_NO_FD: + close(socket_fd); + return 0; + case SOCKET_OK: + vfio_group_fd = vfio_mp_sync_receive_fd(socket_fd); + /* if we got the fd, return it */ + if (vfio_group_fd > 0) { + close(socket_fd); + return vfio_group_fd; + } + /* fall-through on error */ + default: + RTE_LOG(ERR, EAL, " cannot get container fd!\n"); + close(socket_fd); + return -1; + } + } + return -1; +} + +static void +clear_current_group(void) +{ + vfio_cfg.vfio_groups[vfio_cfg.vfio_group_idx].group_no = 0; + vfio_cfg.vfio_groups[vfio_cfg.vfio_group_idx].fd = -1; +} + +int vfio_setup_device(const char *sysfs_base, const char *dev_addr, + int *vfio_dev_fd, struct vfio_device_info *device_info) +{ + struct vfio_group_status group_status = { + .argsz = sizeof(group_status) + }; + int vfio_group_fd; + int iommu_group_no; + int ret; + + /* get group number */ + ret = vfio_get_group_no(sysfs_base, dev_addr, &iommu_group_no); + if (ret == 0) { + RTE_LOG(WARNING, EAL, " %s not managed by VFIO driver, skipping\n", + dev_addr); + return 1; + } + + /* if negative, something failed */ + if (ret < 0) + return -1; + + /* get the actual group fd */ + vfio_group_fd = vfio_get_group_fd(iommu_group_no); + if (vfio_group_fd < 0) + return -1; + + /* store group fd */ + vfio_cfg.vfio_groups[vfio_cfg.vfio_group_idx].group_no = iommu_group_no; + vfio_cfg.vfio_groups[vfio_cfg.vfio_group_idx].fd = vfio_group_fd; + + /* if group_fd == 0, that means the device isn't managed by VFIO */ + if (vfio_group_fd == 0) { + RTE_LOG(WARNING, EAL, " %s not managed by VFIO driver, skipping\n", + dev_addr); + /* we store 0 as group fd to distinguish between existing but + * unbound VFIO groups, and groups that don't exist at all. + */ + vfio_cfg.vfio_group_idx++; + return 1; + } + + /* + * at this point, we know that this group is viable (meaning, all devices + * are either bound to VFIO or not bound to anything) + */ + + /* check if the group is viable */ + ret = ioctl(vfio_group_fd, VFIO_GROUP_GET_STATUS, &group_status); + if (ret) { + RTE_LOG(ERR, EAL, " %s cannot get group status, " + "error %i (%s)\n", dev_addr, errno, strerror(errno)); + close(vfio_group_fd); + clear_current_group(); + return -1; + } else if (!(group_status.flags & VFIO_GROUP_FLAGS_VIABLE)) { + RTE_LOG(ERR, EAL, " %s VFIO group is not viable!\n", dev_addr); + close(vfio_group_fd); + clear_current_group(); + return -1; + } + + /* check if group does not have a container yet */ + if (!(group_status.flags & VFIO_GROUP_FLAGS_CONTAINER_SET)) { + + /* add group to a container */ + ret = ioctl(vfio_group_fd, VFIO_GROUP_SET_CONTAINER, + &vfio_cfg.vfio_container_fd); + if (ret) { + RTE_LOG(ERR, EAL, " %s cannot add VFIO group to container, " + "error %i (%s)\n", dev_addr, errno, strerror(errno)); + close(vfio_group_fd); + clear_current_group(); + return -1; + } + /* + * at this point we know that this group has been successfully + * initialized, so we increment vfio_group_idx to indicate that we can + * add new groups. + */ + vfio_cfg.vfio_group_idx++; + } + + /* + * pick an IOMMU type and set up DMA mappings for container + * + * needs to be done only once, only when at least one group is assigned to + * a container and only in primary process + */ + if (internal_config.process_type == RTE_PROC_PRIMARY && + vfio_cfg.vfio_container_has_dma == 0) { + /* select an IOMMU type which we will be using */ + const struct vfio_iommu_type *t = + vfio_set_iommu_type(vfio_cfg.vfio_container_fd); + if (!t) { + RTE_LOG(ERR, EAL, " %s failed to select IOMMU type\n", dev_addr); + return -1; + } + ret = t->dma_map_func(vfio_cfg.vfio_container_fd); + if (ret) { + RTE_LOG(ERR, EAL, " %s DMA remapping failed, " + "error %i (%s)\n", dev_addr, errno, strerror(errno)); + return -1; + } + vfio_cfg.vfio_container_has_dma = 1; + } + + /* get a file descriptor for the device */ + *vfio_dev_fd = ioctl(vfio_group_fd, VFIO_GROUP_GET_DEVICE_FD, dev_addr); + if (*vfio_dev_fd < 0) { + /* if we cannot get a device fd, this simply means that this + * particular port is not bound to VFIO + */ + RTE_LOG(WARNING, EAL, " %s not managed by VFIO driver, skipping\n", + dev_addr); + return 1; + } + + /* test and setup the device */ + ret = ioctl(*vfio_dev_fd, VFIO_DEVICE_GET_INFO, device_info); + if (ret) { + RTE_LOG(ERR, EAL, " %s cannot get device info, " + "error %i (%s)\n", dev_addr, errno, strerror(errno)); + close(*vfio_dev_fd); + return -1; + } + + return 0; +} + +int +vfio_enable(const char *modname) +{ + /* initialize group list */ + int i; + int vfio_available; + + for (i = 0; i < VFIO_MAX_GROUPS; i++) { + vfio_cfg.vfio_groups[i].fd = -1; + vfio_cfg.vfio_groups[i].group_no = -1; + } + + /* inform the user that we are probing for VFIO */ + RTE_LOG(INFO, EAL, "Probing VFIO support...\n"); + + /* check if vfio-pci module is loaded */ + vfio_available = rte_eal_check_module(modname); + + /* return error directly */ + if (vfio_available == -1) { + RTE_LOG(INFO, EAL, "Could not get loaded module details!\n"); + return -1; + } + + /* return 0 if VFIO modules not loaded */ + if (vfio_available == 0) { + RTE_LOG(DEBUG, EAL, "VFIO modules not loaded, " + "skipping VFIO support...\n"); + return 0; + } + + vfio_cfg.vfio_container_fd = vfio_get_container_fd(); + + /* check if we have VFIO driver enabled */ + if (vfio_cfg.vfio_container_fd != -1) { + RTE_LOG(NOTICE, EAL, "VFIO support initialized\n"); + vfio_cfg.vfio_enabled = 1; + } else { + RTE_LOG(NOTICE, EAL, "VFIO support could not be initialized\n"); + } + + return 0; +} + +int +vfio_is_enabled(const char *modname) +{ + const int mod_available = rte_eal_check_module(modname); + return vfio_cfg.vfio_enabled && mod_available; +} + +const struct vfio_iommu_type * +vfio_set_iommu_type(int vfio_container_fd) { + unsigned idx; + for (idx = 0; idx < RTE_DIM(iommu_types); idx++) { + const struct vfio_iommu_type *t = &iommu_types[idx]; + + int ret = ioctl(vfio_container_fd, VFIO_SET_IOMMU, + t->type_id); + if (!ret) { + RTE_LOG(NOTICE, EAL, " using IOMMU type %d (%s)\n", + t->type_id, t->name); + return t; + } + /* not an error, there may be more supported IOMMU types */ + RTE_LOG(DEBUG, EAL, " set IOMMU type %d (%s) failed, " + "error %i (%s)\n", t->type_id, t->name, errno, + strerror(errno)); + } + /* if we didn't find a suitable IOMMU type, fail */ + return NULL; +} + +int +vfio_has_supported_extensions(int vfio_container_fd) { + int ret; + unsigned idx, n_extensions = 0; + for (idx = 0; idx < RTE_DIM(iommu_types); idx++) { + const struct vfio_iommu_type *t = &iommu_types[idx]; + + ret = ioctl(vfio_container_fd, VFIO_CHECK_EXTENSION, + t->type_id); + if (ret < 0) { + RTE_LOG(ERR, EAL, " could not get IOMMU type, " + "error %i (%s)\n", errno, + strerror(errno)); + close(vfio_container_fd); + return -1; + } else if (ret == 1) { + /* we found a supported extension */ + n_extensions++; + } + RTE_LOG(DEBUG, EAL, " IOMMU type %d (%s) is %s\n", + t->type_id, t->name, + ret ? "supported" : "not supported"); + } + + /* if we didn't find any supported IOMMU types, fail */ + if (!n_extensions) { + close(vfio_container_fd); + return -1; + } + + return 0; +} + +int +vfio_get_container_fd(void) +{ + int ret, vfio_container_fd; + + /* if we're in a primary process, try to open the container */ + if (internal_config.process_type == RTE_PROC_PRIMARY) { + vfio_container_fd = open(VFIO_CONTAINER_PATH, O_RDWR); + if (vfio_container_fd < 0) { + RTE_LOG(ERR, EAL, " cannot open VFIO container, " + "error %i (%s)\n", errno, strerror(errno)); + return -1; + } + + /* check VFIO API version */ + ret = ioctl(vfio_container_fd, VFIO_GET_API_VERSION); + if (ret != VFIO_API_VERSION) { + if (ret < 0) + RTE_LOG(ERR, EAL, " could not get VFIO API version, " + "error %i (%s)\n", errno, strerror(errno)); + else + RTE_LOG(ERR, EAL, " unsupported VFIO API version!\n"); + close(vfio_container_fd); + return -1; + } + + ret = vfio_has_supported_extensions(vfio_container_fd); + if (ret) { + RTE_LOG(ERR, EAL, " no supported IOMMU " + "extensions found!\n"); + return -1; + } + + return vfio_container_fd; + } else { + /* + * if we're in a secondary process, request container fd from the + * primary process via our socket + */ + int socket_fd; + + socket_fd = vfio_mp_sync_connect_to_primary(); + if (socket_fd < 0) { + RTE_LOG(ERR, EAL, " cannot connect to primary process!\n"); + return -1; + } + if (vfio_mp_sync_send_request(socket_fd, SOCKET_REQ_CONTAINER) < 0) { + RTE_LOG(ERR, EAL, " cannot request container fd!\n"); + close(socket_fd); + return -1; + } + vfio_container_fd = vfio_mp_sync_receive_fd(socket_fd); + if (vfio_container_fd < 0) { + RTE_LOG(ERR, EAL, " cannot get container fd!\n"); + close(socket_fd); + return -1; + } + close(socket_fd); + return vfio_container_fd; + } + + return -1; +} + +int +vfio_get_group_no(const char *sysfs_base, + const char *dev_addr, int *iommu_group_no) +{ + char linkname[PATH_MAX]; + char filename[PATH_MAX]; + char *tok[16], *group_tok, *end; + int ret; + + memset(linkname, 0, sizeof(linkname)); + memset(filename, 0, sizeof(filename)); + + /* try to find out IOMMU group for this device */ + snprintf(linkname, sizeof(linkname), + "%s/%s/iommu_group", sysfs_base, dev_addr); + + ret = readlink(linkname, filename, sizeof(filename)); + + /* if the link doesn't exist, no VFIO for us */ + if (ret < 0) + return 0; + + ret = rte_strsplit(filename, sizeof(filename), + tok, RTE_DIM(tok), '/'); + + if (ret <= 0) { + RTE_LOG(ERR, EAL, " %s cannot get IOMMU group\n", dev_addr); + return -1; + } + + /* IOMMU group is always the last token */ + errno = 0; + group_tok = tok[ret - 1]; + end = group_tok; + *iommu_group_no = strtol(group_tok, &end, 10); + if ((end != group_tok && *end != '\0') || errno != 0) { + RTE_LOG(ERR, EAL, " %s error parsing IOMMU number!\n", dev_addr); + return -1; + } + + return 1; +} + +static int +vfio_type1_dma_map(int vfio_container_fd) +{ + const struct rte_memseg *ms = rte_eal_get_physmem_layout(); + int i, ret; + + /* map all DPDK segments for DMA. use 1:1 PA to IOVA mapping */ + for (i = 0; i < RTE_MAX_MEMSEG; i++) { + struct vfio_iommu_type1_dma_map dma_map; + + if (ms[i].addr == NULL) + break; + + memset(&dma_map, 0, sizeof(dma_map)); + dma_map.argsz = sizeof(struct vfio_iommu_type1_dma_map); + dma_map.vaddr = ms[i].addr_64; + dma_map.size = ms[i].len; + dma_map.iova = ms[i].phys_addr; + dma_map.flags = VFIO_DMA_MAP_FLAG_READ | VFIO_DMA_MAP_FLAG_WRITE; + + ret = ioctl(vfio_container_fd, VFIO_IOMMU_MAP_DMA, &dma_map); + + if (ret) { + RTE_LOG(ERR, EAL, " cannot set up DMA remapping, " + "error %i (%s)\n", errno, strerror(errno)); + return -1; + } + } + + return 0; +} + +static int +vfio_noiommu_dma_map(int __rte_unused vfio_container_fd) +{ + /* No-IOMMU mode does not need DMA mapping */ + return 0; +} + +#endif |