aboutsummaryrefslogtreecommitdiffstats
path: root/lib/librte_ethdev/rte_ethdev.h
diff options
context:
space:
mode:
authorLuca Boccassi <luca.boccassi@gmail.com>2018-08-14 18:52:30 +0100
committerLuca Boccassi <luca.boccassi@gmail.com>2018-08-14 18:53:17 +0100
commitb63264c8342e6a1b6971c79550d2af2024b6a4de (patch)
tree83114aac64286fe616506c0b3dfaec2ab86ef835 /lib/librte_ethdev/rte_ethdev.h
parentca33590b6af032bff57d9cc70455660466a654b2 (diff)
New upstream version 18.08upstream/18.08
Change-Id: I32fdf5e5016556d9c0a6d88ddaf1fc468961790a Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
Diffstat (limited to 'lib/librte_ethdev/rte_ethdev.h')
-rw-r--r--lib/librte_ethdev/rte_ethdev.h4298
1 files changed, 4298 insertions, 0 deletions
diff --git a/lib/librte_ethdev/rte_ethdev.h b/lib/librte_ethdev/rte_ethdev.h
new file mode 100644
index 00000000..7070e9ab
--- /dev/null
+++ b/lib/librte_ethdev/rte_ethdev.h
@@ -0,0 +1,4298 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2017 Intel Corporation
+ */
+
+#ifndef _RTE_ETHDEV_H_
+#define _RTE_ETHDEV_H_
+
+/**
+ * @file
+ *
+ * RTE Ethernet Device API
+ *
+ * The Ethernet Device API is composed of two parts:
+ *
+ * - The application-oriented Ethernet API that includes functions to setup
+ * an Ethernet device (configure it, setup its RX and TX queues and start it),
+ * to get its MAC address, the speed and the status of its physical link,
+ * to receive and to transmit packets, and so on.
+ *
+ * - The driver-oriented Ethernet API that exports functions allowing
+ * an Ethernet Poll Mode Driver (PMD) to allocate an Ethernet device instance,
+ * create memzone for HW rings and process registered callbacks, and so on.
+ * PMDs should include rte_ethdev_driver.h instead of this header.
+ *
+ * By default, all the functions of the Ethernet Device API exported by a PMD
+ * are lock-free functions which assume to not be invoked in parallel on
+ * different logical cores to work on the same target object. For instance,
+ * the receive function of a PMD cannot be invoked in parallel on two logical
+ * cores to poll the same RX queue [of the same port]. Of course, this function
+ * can be invoked in parallel by different logical cores on different RX queues.
+ * It is the responsibility of the upper level application to enforce this rule.
+ *
+ * If needed, parallel accesses by multiple logical cores to shared queues
+ * shall be explicitly protected by dedicated inline lock-aware functions
+ * built on top of their corresponding lock-free functions of the PMD API.
+ *
+ * In all functions of the Ethernet API, the Ethernet device is
+ * designated by an integer >= 0 named the device port identifier.
+ *
+ * At the Ethernet driver level, Ethernet devices are represented by a generic
+ * data structure of type *rte_eth_dev*.
+ *
+ * Ethernet devices are dynamically registered during the PCI probing phase
+ * performed at EAL initialization time.
+ * When an Ethernet device is being probed, an *rte_eth_dev* structure and
+ * a new port identifier are allocated for that device. Then, the eth_dev_init()
+ * function supplied by the Ethernet driver matching the probed PCI
+ * device is invoked to properly initialize the device.
+ *
+ * The role of the device init function consists of resetting the hardware,
+ * checking access to Non-volatile Memory (NVM), reading the MAC address
+ * from NVM etc.
+ *
+ * If the device init operation is successful, the correspondence between
+ * the port identifier assigned to the new device and its associated
+ * *rte_eth_dev* structure is effectively registered.
+ * Otherwise, both the *rte_eth_dev* structure and the port identifier are
+ * freed.
+ *
+ * The functions exported by the application Ethernet API to setup a device
+ * designated by its port identifier must be invoked in the following order:
+ * - rte_eth_dev_configure()
+ * - rte_eth_tx_queue_setup()
+ * - rte_eth_rx_queue_setup()
+ * - rte_eth_dev_start()
+ *
+ * Then, the network application can invoke, in any order, the functions
+ * exported by the Ethernet API to get the MAC address of a given device, to
+ * get the speed and the status of a device physical link, to receive/transmit
+ * [burst of] packets, and so on.
+ *
+ * If the application wants to change the configuration (i.e. call
+ * rte_eth_dev_configure(), rte_eth_tx_queue_setup(), or
+ * rte_eth_rx_queue_setup()), it must call rte_eth_dev_stop() first to stop the
+ * device and then do the reconfiguration before calling rte_eth_dev_start()
+ * again. The transmit and receive functions should not be invoked when the
+ * device is stopped.
+ *
+ * Please note that some configuration is not stored between calls to
+ * rte_eth_dev_stop()/rte_eth_dev_start(). The following configuration will
+ * be retained:
+ *
+ * - flow control settings
+ * - receive mode configuration (promiscuous mode, hardware checksum mode,
+ * RSS/VMDQ settings etc.)
+ * - VLAN filtering configuration
+ * - MAC addresses supplied to MAC address array
+ * - flow director filtering mode (but not filtering rules)
+ * - NIC queue statistics mappings
+ *
+ * Any other configuration will not be stored and will need to be re-entered
+ * before a call to rte_eth_dev_start().
+ *
+ * Finally, a network application can close an Ethernet device by invoking the
+ * rte_eth_dev_close() function.
+ *
+ * Each function of the application Ethernet API invokes a specific function
+ * of the PMD that controls the target device designated by its port
+ * identifier.
+ * For this purpose, all device-specific functions of an Ethernet driver are
+ * supplied through a set of pointers contained in a generic structure of type
+ * *eth_dev_ops*.
+ * The address of the *eth_dev_ops* structure is stored in the *rte_eth_dev*
+ * structure by the device init function of the Ethernet driver, which is
+ * invoked during the PCI probing phase, as explained earlier.
+ *
+ * In other words, each function of the Ethernet API simply retrieves the
+ * *rte_eth_dev* structure associated with the device port identifier and
+ * performs an indirect invocation of the corresponding driver function
+ * supplied in the *eth_dev_ops* structure of the *rte_eth_dev* structure.
+ *
+ * For performance reasons, the address of the burst-oriented RX and TX
+ * functions of the Ethernet driver are not contained in the *eth_dev_ops*
+ * structure. Instead, they are directly stored at the beginning of the
+ * *rte_eth_dev* structure to avoid an extra indirect memory access during
+ * their invocation.
+ *
+ * RTE ethernet device drivers do not use interrupts for transmitting or
+ * receiving. Instead, Ethernet drivers export Poll-Mode receive and transmit
+ * functions to applications.
+ * Both receive and transmit functions are packet-burst oriented to minimize
+ * their cost per packet through the following optimizations:
+ *
+ * - Sharing among multiple packets the incompressible cost of the
+ * invocation of receive/transmit functions.
+ *
+ * - Enabling receive/transmit functions to take advantage of burst-oriented
+ * hardware features (L1 cache, prefetch instructions, NIC head/tail
+ * registers) to minimize the number of CPU cycles per packet, for instance,
+ * by avoiding useless read memory accesses to ring descriptors, or by
+ * systematically using arrays of pointers that exactly fit L1 cache line
+ * boundaries and sizes.
+ *
+ * The burst-oriented receive function does not provide any error notification,
+ * to avoid the corresponding overhead. As a hint, the upper-level application
+ * might check the status of the device link once being systematically returned
+ * a 0 value by the receive function of the driver for a given number of tries.
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+/* Use this macro to check if LRO API is supported */
+#define RTE_ETHDEV_HAS_LRO_SUPPORT
+
+#include <rte_compat.h>
+#include <rte_log.h>
+#include <rte_interrupts.h>
+#include <rte_dev.h>
+#include <rte_devargs.h>
+#include <rte_errno.h>
+#include <rte_common.h>
+#include <rte_config.h>
+
+#include "rte_ether.h"
+#include "rte_eth_ctrl.h"
+#include "rte_dev_info.h"
+
+extern int rte_eth_dev_logtype;
+
+#define RTE_ETHDEV_LOG(level, ...) \
+ rte_log(RTE_LOG_ ## level, rte_eth_dev_logtype, "" __VA_ARGS__)
+
+struct rte_mbuf;
+
+/**
+ * A structure used to retrieve statistics for an Ethernet port.
+ * Not all statistics fields in struct rte_eth_stats are supported
+ * by any type of network interface card (NIC). If any statistics
+ * field is not supported, its value is 0.
+ */
+struct rte_eth_stats {
+ uint64_t ipackets; /**< Total number of successfully received packets. */
+ uint64_t opackets; /**< Total number of successfully transmitted packets.*/
+ uint64_t ibytes; /**< Total number of successfully received bytes. */
+ uint64_t obytes; /**< Total number of successfully transmitted bytes. */
+ uint64_t imissed;
+ /**< Total of RX packets dropped by the HW,
+ * because there are no available buffer (i.e. RX queues are full).
+ */
+ uint64_t ierrors; /**< Total number of erroneous received packets. */
+ uint64_t oerrors; /**< Total number of failed transmitted packets. */
+ uint64_t rx_nombuf; /**< Total number of RX mbuf allocation failures. */
+ uint64_t q_ipackets[RTE_ETHDEV_QUEUE_STAT_CNTRS];
+ /**< Total number of queue RX packets. */
+ uint64_t q_opackets[RTE_ETHDEV_QUEUE_STAT_CNTRS];
+ /**< Total number of queue TX packets. */
+ uint64_t q_ibytes[RTE_ETHDEV_QUEUE_STAT_CNTRS];
+ /**< Total number of successfully received queue bytes. */
+ uint64_t q_obytes[RTE_ETHDEV_QUEUE_STAT_CNTRS];
+ /**< Total number of successfully transmitted queue bytes. */
+ uint64_t q_errors[RTE_ETHDEV_QUEUE_STAT_CNTRS];
+ /**< Total number of queue packets received that are dropped. */
+};
+
+/**
+ * Device supported speeds bitmap flags
+ */
+#define ETH_LINK_SPEED_AUTONEG (0 << 0) /**< Autonegotiate (all speeds) */
+#define ETH_LINK_SPEED_FIXED (1 << 0) /**< Disable autoneg (fixed speed) */
+#define ETH_LINK_SPEED_10M_HD (1 << 1) /**< 10 Mbps half-duplex */
+#define ETH_LINK_SPEED_10M (1 << 2) /**< 10 Mbps full-duplex */
+#define ETH_LINK_SPEED_100M_HD (1 << 3) /**< 100 Mbps half-duplex */
+#define ETH_LINK_SPEED_100M (1 << 4) /**< 100 Mbps full-duplex */
+#define ETH_LINK_SPEED_1G (1 << 5) /**< 1 Gbps */
+#define ETH_LINK_SPEED_2_5G (1 << 6) /**< 2.5 Gbps */
+#define ETH_LINK_SPEED_5G (1 << 7) /**< 5 Gbps */
+#define ETH_LINK_SPEED_10G (1 << 8) /**< 10 Gbps */
+#define ETH_LINK_SPEED_20G (1 << 9) /**< 20 Gbps */
+#define ETH_LINK_SPEED_25G (1 << 10) /**< 25 Gbps */
+#define ETH_LINK_SPEED_40G (1 << 11) /**< 40 Gbps */
+#define ETH_LINK_SPEED_50G (1 << 12) /**< 50 Gbps */
+#define ETH_LINK_SPEED_56G (1 << 13) /**< 56 Gbps */
+#define ETH_LINK_SPEED_100G (1 << 14) /**< 100 Gbps */
+
+/**
+ * Ethernet numeric link speeds in Mbps
+ */
+#define ETH_SPEED_NUM_NONE 0 /**< Not defined */
+#define ETH_SPEED_NUM_10M 10 /**< 10 Mbps */
+#define ETH_SPEED_NUM_100M 100 /**< 100 Mbps */
+#define ETH_SPEED_NUM_1G 1000 /**< 1 Gbps */
+#define ETH_SPEED_NUM_2_5G 2500 /**< 2.5 Gbps */
+#define ETH_SPEED_NUM_5G 5000 /**< 5 Gbps */
+#define ETH_SPEED_NUM_10G 10000 /**< 10 Gbps */
+#define ETH_SPEED_NUM_20G 20000 /**< 20 Gbps */
+#define ETH_SPEED_NUM_25G 25000 /**< 25 Gbps */
+#define ETH_SPEED_NUM_40G 40000 /**< 40 Gbps */
+#define ETH_SPEED_NUM_50G 50000 /**< 50 Gbps */
+#define ETH_SPEED_NUM_56G 56000 /**< 56 Gbps */
+#define ETH_SPEED_NUM_100G 100000 /**< 100 Gbps */
+
+/**
+ * A structure used to retrieve link-level information of an Ethernet port.
+ */
+__extension__
+struct rte_eth_link {
+ uint32_t link_speed; /**< ETH_SPEED_NUM_ */
+ uint16_t link_duplex : 1; /**< ETH_LINK_[HALF/FULL]_DUPLEX */
+ uint16_t link_autoneg : 1; /**< ETH_LINK_[AUTONEG/FIXED] */
+ uint16_t link_status : 1; /**< ETH_LINK_[DOWN/UP] */
+} __attribute__((aligned(8))); /**< aligned for atomic64 read/write */
+
+/* Utility constants */
+#define ETH_LINK_HALF_DUPLEX 0 /**< Half-duplex connection (see link_duplex). */
+#define ETH_LINK_FULL_DUPLEX 1 /**< Full-duplex connection (see link_duplex). */
+#define ETH_LINK_DOWN 0 /**< Link is down (see link_status). */
+#define ETH_LINK_UP 1 /**< Link is up (see link_status). */
+#define ETH_LINK_FIXED 0 /**< No autonegotiation (see link_autoneg). */
+#define ETH_LINK_AUTONEG 1 /**< Autonegotiated (see link_autoneg). */
+
+/**
+ * A structure used to configure the ring threshold registers of an RX/TX
+ * queue for an Ethernet port.
+ */
+struct rte_eth_thresh {
+ uint8_t pthresh; /**< Ring prefetch threshold. */
+ uint8_t hthresh; /**< Ring host threshold. */
+ uint8_t wthresh; /**< Ring writeback threshold. */
+};
+
+/**
+ * Simple flags are used for rte_eth_conf.rxmode.mq_mode.
+ */
+#define ETH_MQ_RX_RSS_FLAG 0x1
+#define ETH_MQ_RX_DCB_FLAG 0x2
+#define ETH_MQ_RX_VMDQ_FLAG 0x4
+
+/**
+ * A set of values to identify what method is to be used to route
+ * packets to multiple queues.
+ */
+enum rte_eth_rx_mq_mode {
+ /** None of DCB,RSS or VMDQ mode */
+ ETH_MQ_RX_NONE = 0,
+
+ /** For RX side, only RSS is on */
+ ETH_MQ_RX_RSS = ETH_MQ_RX_RSS_FLAG,
+ /** For RX side,only DCB is on. */
+ ETH_MQ_RX_DCB = ETH_MQ_RX_DCB_FLAG,
+ /** Both DCB and RSS enable */
+ ETH_MQ_RX_DCB_RSS = ETH_MQ_RX_RSS_FLAG | ETH_MQ_RX_DCB_FLAG,
+
+ /** Only VMDQ, no RSS nor DCB */
+ ETH_MQ_RX_VMDQ_ONLY = ETH_MQ_RX_VMDQ_FLAG,
+ /** RSS mode with VMDQ */
+ ETH_MQ_RX_VMDQ_RSS = ETH_MQ_RX_RSS_FLAG | ETH_MQ_RX_VMDQ_FLAG,
+ /** Use VMDQ+DCB to route traffic to queues */
+ ETH_MQ_RX_VMDQ_DCB = ETH_MQ_RX_VMDQ_FLAG | ETH_MQ_RX_DCB_FLAG,
+ /** Enable both VMDQ and DCB in VMDq */
+ ETH_MQ_RX_VMDQ_DCB_RSS = ETH_MQ_RX_RSS_FLAG | ETH_MQ_RX_DCB_FLAG |
+ ETH_MQ_RX_VMDQ_FLAG,
+};
+
+/**
+ * for rx mq mode backward compatible
+ */
+#define ETH_RSS ETH_MQ_RX_RSS
+#define VMDQ_DCB ETH_MQ_RX_VMDQ_DCB
+#define ETH_DCB_RX ETH_MQ_RX_DCB
+
+/**
+ * A set of values to identify what method is to be used to transmit
+ * packets using multi-TCs.
+ */
+enum rte_eth_tx_mq_mode {
+ ETH_MQ_TX_NONE = 0, /**< It is in neither DCB nor VT mode. */
+ ETH_MQ_TX_DCB, /**< For TX side,only DCB is on. */
+ ETH_MQ_TX_VMDQ_DCB, /**< For TX side,both DCB and VT is on. */
+ ETH_MQ_TX_VMDQ_ONLY, /**< Only VT on, no DCB */
+};
+
+/**
+ * for tx mq mode backward compatible
+ */
+#define ETH_DCB_NONE ETH_MQ_TX_NONE
+#define ETH_VMDQ_DCB_TX ETH_MQ_TX_VMDQ_DCB
+#define ETH_DCB_TX ETH_MQ_TX_DCB
+
+/**
+ * A structure used to configure the RX features of an Ethernet port.
+ */
+struct rte_eth_rxmode {
+ /** The multi-queue packet distribution mode to be used, e.g. RSS. */
+ enum rte_eth_rx_mq_mode mq_mode;
+ uint32_t max_rx_pkt_len; /**< Only used if JUMBO_FRAME enabled. */
+ uint16_t split_hdr_size; /**< hdr buf size (header_split enabled).*/
+ /**
+ * Per-port Rx offloads to be set using DEV_RX_OFFLOAD_* flags.
+ * Only offloads set on rx_offload_capa field on rte_eth_dev_info
+ * structure are allowed to be set.
+ */
+ uint64_t offloads;
+};
+
+/**
+ * VLAN types to indicate if it is for single VLAN, inner VLAN or outer VLAN.
+ * Note that single VLAN is treated the same as inner VLAN.
+ */
+enum rte_vlan_type {
+ ETH_VLAN_TYPE_UNKNOWN = 0,
+ ETH_VLAN_TYPE_INNER, /**< Inner VLAN. */
+ ETH_VLAN_TYPE_OUTER, /**< Single VLAN, or outer VLAN. */
+ ETH_VLAN_TYPE_MAX,
+};
+
+/**
+ * A structure used to describe a vlan filter.
+ * If the bit corresponding to a VID is set, such VID is on.
+ */
+struct rte_vlan_filter_conf {
+ uint64_t ids[64];
+};
+
+/**
+ * A structure used to configure the Receive Side Scaling (RSS) feature
+ * of an Ethernet port.
+ * If not NULL, the *rss_key* pointer of the *rss_conf* structure points
+ * to an array holding the RSS key to use for hashing specific header
+ * fields of received packets. The length of this array should be indicated
+ * by *rss_key_len* below. Otherwise, a default random hash key is used by
+ * the device driver.
+ *
+ * The *rss_key_len* field of the *rss_conf* structure indicates the length
+ * in bytes of the array pointed by *rss_key*. To be compatible, this length
+ * will be checked in i40e only. Others assume 40 bytes to be used as before.
+ *
+ * The *rss_hf* field of the *rss_conf* structure indicates the different
+ * types of IPv4/IPv6 packets to which the RSS hashing must be applied.
+ * Supplying an *rss_hf* equal to zero disables the RSS feature.
+ */
+struct rte_eth_rss_conf {
+ uint8_t *rss_key; /**< If not NULL, 40-byte hash key. */
+ uint8_t rss_key_len; /**< hash key length in bytes. */
+ uint64_t rss_hf; /**< Hash functions to apply - see below. */
+};
+
+/*
+ * The RSS offload types are defined based on flow types which are defined
+ * in rte_eth_ctrl.h. Different NIC hardwares may support different RSS offload
+ * types. The supported flow types or RSS offload types can be queried by
+ * rte_eth_dev_info_get().
+ */
+#define ETH_RSS_IPV4 (1ULL << RTE_ETH_FLOW_IPV4)
+#define ETH_RSS_FRAG_IPV4 (1ULL << RTE_ETH_FLOW_FRAG_IPV4)
+#define ETH_RSS_NONFRAG_IPV4_TCP (1ULL << RTE_ETH_FLOW_NONFRAG_IPV4_TCP)
+#define ETH_RSS_NONFRAG_IPV4_UDP (1ULL << RTE_ETH_FLOW_NONFRAG_IPV4_UDP)
+#define ETH_RSS_NONFRAG_IPV4_SCTP (1ULL << RTE_ETH_FLOW_NONFRAG_IPV4_SCTP)
+#define ETH_RSS_NONFRAG_IPV4_OTHER (1ULL << RTE_ETH_FLOW_NONFRAG_IPV4_OTHER)
+#define ETH_RSS_IPV6 (1ULL << RTE_ETH_FLOW_IPV6)
+#define ETH_RSS_FRAG_IPV6 (1ULL << RTE_ETH_FLOW_FRAG_IPV6)
+#define ETH_RSS_NONFRAG_IPV6_TCP (1ULL << RTE_ETH_FLOW_NONFRAG_IPV6_TCP)
+#define ETH_RSS_NONFRAG_IPV6_UDP (1ULL << RTE_ETH_FLOW_NONFRAG_IPV6_UDP)
+#define ETH_RSS_NONFRAG_IPV6_SCTP (1ULL << RTE_ETH_FLOW_NONFRAG_IPV6_SCTP)
+#define ETH_RSS_NONFRAG_IPV6_OTHER (1ULL << RTE_ETH_FLOW_NONFRAG_IPV6_OTHER)
+#define ETH_RSS_L2_PAYLOAD (1ULL << RTE_ETH_FLOW_L2_PAYLOAD)
+#define ETH_RSS_IPV6_EX (1ULL << RTE_ETH_FLOW_IPV6_EX)
+#define ETH_RSS_IPV6_TCP_EX (1ULL << RTE_ETH_FLOW_IPV6_TCP_EX)
+#define ETH_RSS_IPV6_UDP_EX (1ULL << RTE_ETH_FLOW_IPV6_UDP_EX)
+#define ETH_RSS_PORT (1ULL << RTE_ETH_FLOW_PORT)
+#define ETH_RSS_VXLAN (1ULL << RTE_ETH_FLOW_VXLAN)
+#define ETH_RSS_GENEVE (1ULL << RTE_ETH_FLOW_GENEVE)
+#define ETH_RSS_NVGRE (1ULL << RTE_ETH_FLOW_NVGRE)
+
+#define ETH_RSS_IP ( \
+ ETH_RSS_IPV4 | \
+ ETH_RSS_FRAG_IPV4 | \
+ ETH_RSS_NONFRAG_IPV4_OTHER | \
+ ETH_RSS_IPV6 | \
+ ETH_RSS_FRAG_IPV6 | \
+ ETH_RSS_NONFRAG_IPV6_OTHER | \
+ ETH_RSS_IPV6_EX)
+
+#define ETH_RSS_UDP ( \
+ ETH_RSS_NONFRAG_IPV4_UDP | \
+ ETH_RSS_NONFRAG_IPV6_UDP | \
+ ETH_RSS_IPV6_UDP_EX)
+
+#define ETH_RSS_TCP ( \
+ ETH_RSS_NONFRAG_IPV4_TCP | \
+ ETH_RSS_NONFRAG_IPV6_TCP | \
+ ETH_RSS_IPV6_TCP_EX)
+
+#define ETH_RSS_SCTP ( \
+ ETH_RSS_NONFRAG_IPV4_SCTP | \
+ ETH_RSS_NONFRAG_IPV6_SCTP)
+
+#define ETH_RSS_TUNNEL ( \
+ ETH_RSS_VXLAN | \
+ ETH_RSS_GENEVE | \
+ ETH_RSS_NVGRE)
+
+/**< Mask of valid RSS hash protocols */
+#define ETH_RSS_PROTO_MASK ( \
+ ETH_RSS_IPV4 | \
+ ETH_RSS_FRAG_IPV4 | \
+ ETH_RSS_NONFRAG_IPV4_TCP | \
+ ETH_RSS_NONFRAG_IPV4_UDP | \
+ ETH_RSS_NONFRAG_IPV4_SCTP | \
+ ETH_RSS_NONFRAG_IPV4_OTHER | \
+ ETH_RSS_IPV6 | \
+ ETH_RSS_FRAG_IPV6 | \
+ ETH_RSS_NONFRAG_IPV6_TCP | \
+ ETH_RSS_NONFRAG_IPV6_UDP | \
+ ETH_RSS_NONFRAG_IPV6_SCTP | \
+ ETH_RSS_NONFRAG_IPV6_OTHER | \
+ ETH_RSS_L2_PAYLOAD | \
+ ETH_RSS_IPV6_EX | \
+ ETH_RSS_IPV6_TCP_EX | \
+ ETH_RSS_IPV6_UDP_EX | \
+ ETH_RSS_PORT | \
+ ETH_RSS_VXLAN | \
+ ETH_RSS_GENEVE | \
+ ETH_RSS_NVGRE)
+
+/*
+ * Definitions used for redirection table entry size.
+ * Some RSS RETA sizes may not be supported by some drivers, check the
+ * documentation or the description of relevant functions for more details.
+ */
+#define ETH_RSS_RETA_SIZE_64 64
+#define ETH_RSS_RETA_SIZE_128 128
+#define ETH_RSS_RETA_SIZE_256 256
+#define ETH_RSS_RETA_SIZE_512 512
+#define RTE_RETA_GROUP_SIZE 64
+
+/* Definitions used for VMDQ and DCB functionality */
+#define ETH_VMDQ_MAX_VLAN_FILTERS 64 /**< Maximum nb. of VMDQ vlan filters. */
+#define ETH_DCB_NUM_USER_PRIORITIES 8 /**< Maximum nb. of DCB priorities. */
+#define ETH_VMDQ_DCB_NUM_QUEUES 128 /**< Maximum nb. of VMDQ DCB queues. */
+#define ETH_DCB_NUM_QUEUES 128 /**< Maximum nb. of DCB queues. */
+
+/* DCB capability defines */
+#define ETH_DCB_PG_SUPPORT 0x00000001 /**< Priority Group(ETS) support. */
+#define ETH_DCB_PFC_SUPPORT 0x00000002 /**< Priority Flow Control support. */
+
+/* Definitions used for VLAN Offload functionality */
+#define ETH_VLAN_STRIP_OFFLOAD 0x0001 /**< VLAN Strip On/Off */
+#define ETH_VLAN_FILTER_OFFLOAD 0x0002 /**< VLAN Filter On/Off */
+#define ETH_VLAN_EXTEND_OFFLOAD 0x0004 /**< VLAN Extend On/Off */
+
+/* Definitions used for mask VLAN setting */
+#define ETH_VLAN_STRIP_MASK 0x0001 /**< VLAN Strip setting mask */
+#define ETH_VLAN_FILTER_MASK 0x0002 /**< VLAN Filter setting mask*/
+#define ETH_VLAN_EXTEND_MASK 0x0004 /**< VLAN Extend setting mask*/
+#define ETH_VLAN_ID_MAX 0x0FFF /**< VLAN ID is in lower 12 bits*/
+
+/* Definitions used for receive MAC address */
+#define ETH_NUM_RECEIVE_MAC_ADDR 128 /**< Maximum nb. of receive mac addr. */
+
+/* Definitions used for unicast hash */
+#define ETH_VMDQ_NUM_UC_HASH_ARRAY 128 /**< Maximum nb. of UC hash array. */
+
+/* Definitions used for VMDQ pool rx mode setting */
+#define ETH_VMDQ_ACCEPT_UNTAG 0x0001 /**< accept untagged packets. */
+#define ETH_VMDQ_ACCEPT_HASH_MC 0x0002 /**< accept packets in multicast table . */
+#define ETH_VMDQ_ACCEPT_HASH_UC 0x0004 /**< accept packets in unicast table. */
+#define ETH_VMDQ_ACCEPT_BROADCAST 0x0008 /**< accept broadcast packets. */
+#define ETH_VMDQ_ACCEPT_MULTICAST 0x0010 /**< multicast promiscuous. */
+
+/** Maximum nb. of vlan per mirror rule */
+#define ETH_MIRROR_MAX_VLANS 64
+
+#define ETH_MIRROR_VIRTUAL_POOL_UP 0x01 /**< Virtual Pool uplink Mirroring. */
+#define ETH_MIRROR_UPLINK_PORT 0x02 /**< Uplink Port Mirroring. */
+#define ETH_MIRROR_DOWNLINK_PORT 0x04 /**< Downlink Port Mirroring. */
+#define ETH_MIRROR_VLAN 0x08 /**< VLAN Mirroring. */
+#define ETH_MIRROR_VIRTUAL_POOL_DOWN 0x10 /**< Virtual Pool downlink Mirroring. */
+
+/**
+ * A structure used to configure VLAN traffic mirror of an Ethernet port.
+ */
+struct rte_eth_vlan_mirror {
+ uint64_t vlan_mask; /**< mask for valid VLAN ID. */
+ /** VLAN ID list for vlan mirroring. */
+ uint16_t vlan_id[ETH_MIRROR_MAX_VLANS];
+};
+
+/**
+ * A structure used to configure traffic mirror of an Ethernet port.
+ */
+struct rte_eth_mirror_conf {
+ uint8_t rule_type; /**< Mirroring rule type */
+ uint8_t dst_pool; /**< Destination pool for this mirror rule. */
+ uint64_t pool_mask; /**< Bitmap of pool for pool mirroring */
+ /** VLAN ID setting for VLAN mirroring. */
+ struct rte_eth_vlan_mirror vlan;
+};
+
+/**
+ * A structure used to configure 64 entries of Redirection Table of the
+ * Receive Side Scaling (RSS) feature of an Ethernet port. To configure
+ * more than 64 entries supported by hardware, an array of this structure
+ * is needed.
+ */
+struct rte_eth_rss_reta_entry64 {
+ uint64_t mask;
+ /**< Mask bits indicate which entries need to be updated/queried. */
+ uint16_t reta[RTE_RETA_GROUP_SIZE];
+ /**< Group of 64 redirection table entries. */
+};
+
+/**
+ * This enum indicates the possible number of traffic classes
+ * in DCB configurations
+ */
+enum rte_eth_nb_tcs {
+ ETH_4_TCS = 4, /**< 4 TCs with DCB. */
+ ETH_8_TCS = 8 /**< 8 TCs with DCB. */
+};
+
+/**
+ * This enum indicates the possible number of queue pools
+ * in VMDQ configurations.
+ */
+enum rte_eth_nb_pools {
+ ETH_8_POOLS = 8, /**< 8 VMDq pools. */
+ ETH_16_POOLS = 16, /**< 16 VMDq pools. */
+ ETH_32_POOLS = 32, /**< 32 VMDq pools. */
+ ETH_64_POOLS = 64 /**< 64 VMDq pools. */
+};
+
+/* This structure may be extended in future. */
+struct rte_eth_dcb_rx_conf {
+ enum rte_eth_nb_tcs nb_tcs; /**< Possible DCB TCs, 4 or 8 TCs */
+ /** Traffic class each UP mapped to. */
+ uint8_t dcb_tc[ETH_DCB_NUM_USER_PRIORITIES];
+};
+
+struct rte_eth_vmdq_dcb_tx_conf {
+ enum rte_eth_nb_pools nb_queue_pools; /**< With DCB, 16 or 32 pools. */
+ /** Traffic class each UP mapped to. */
+ uint8_t dcb_tc[ETH_DCB_NUM_USER_PRIORITIES];
+};
+
+struct rte_eth_dcb_tx_conf {
+ enum rte_eth_nb_tcs nb_tcs; /**< Possible DCB TCs, 4 or 8 TCs. */
+ /** Traffic class each UP mapped to. */
+ uint8_t dcb_tc[ETH_DCB_NUM_USER_PRIORITIES];
+};
+
+struct rte_eth_vmdq_tx_conf {
+ enum rte_eth_nb_pools nb_queue_pools; /**< VMDq mode, 64 pools. */
+};
+
+/**
+ * A structure used to configure the VMDQ+DCB feature
+ * of an Ethernet port.
+ *
+ * Using this feature, packets are routed to a pool of queues, based
+ * on the vlan id in the vlan tag, and then to a specific queue within
+ * that pool, using the user priority vlan tag field.
+ *
+ * A default pool may be used, if desired, to route all traffic which
+ * does not match the vlan filter rules.
+ */
+struct rte_eth_vmdq_dcb_conf {
+ enum rte_eth_nb_pools nb_queue_pools; /**< With DCB, 16 or 32 pools */
+ uint8_t enable_default_pool; /**< If non-zero, use a default pool */
+ uint8_t default_pool; /**< The default pool, if applicable */
+ uint8_t nb_pool_maps; /**< We can have up to 64 filters/mappings */
+ struct {
+ uint16_t vlan_id; /**< The vlan id of the received frame */
+ uint64_t pools; /**< Bitmask of pools for packet rx */
+ } pool_map[ETH_VMDQ_MAX_VLAN_FILTERS]; /**< VMDq vlan pool maps. */
+ uint8_t dcb_tc[ETH_DCB_NUM_USER_PRIORITIES];
+ /**< Selects a queue in a pool */
+};
+
+/**
+ * A structure used to configure the VMDQ feature of an Ethernet port when
+ * not combined with the DCB feature.
+ *
+ * Using this feature, packets are routed to a pool of queues. By default,
+ * the pool selection is based on the MAC address, the vlan id in the
+ * vlan tag as specified in the pool_map array.
+ * Passing the ETH_VMDQ_ACCEPT_UNTAG in the rx_mode field allows pool
+ * selection using only the MAC address. MAC address to pool mapping is done
+ * using the rte_eth_dev_mac_addr_add function, with the pool parameter
+ * corresponding to the pool id.
+ *
+ * Queue selection within the selected pool will be done using RSS when
+ * it is enabled or revert to the first queue of the pool if not.
+ *
+ * A default pool may be used, if desired, to route all traffic which
+ * does not match the vlan filter rules or any pool MAC address.
+ */
+struct rte_eth_vmdq_rx_conf {
+ enum rte_eth_nb_pools nb_queue_pools; /**< VMDq only mode, 8 or 64 pools */
+ uint8_t enable_default_pool; /**< If non-zero, use a default pool */
+ uint8_t default_pool; /**< The default pool, if applicable */
+ uint8_t enable_loop_back; /**< Enable VT loop back */
+ uint8_t nb_pool_maps; /**< We can have up to 64 filters/mappings */
+ uint32_t rx_mode; /**< Flags from ETH_VMDQ_ACCEPT_* */
+ struct {
+ uint16_t vlan_id; /**< The vlan id of the received frame */
+ uint64_t pools; /**< Bitmask of pools for packet rx */
+ } pool_map[ETH_VMDQ_MAX_VLAN_FILTERS]; /**< VMDq vlan pool maps. */
+};
+
+/**
+ * A structure used to configure the TX features of an Ethernet port.
+ */
+struct rte_eth_txmode {
+ enum rte_eth_tx_mq_mode mq_mode; /**< TX multi-queues mode. */
+ /**
+ * Per-port Tx offloads to be set using DEV_TX_OFFLOAD_* flags.
+ * Only offloads set on tx_offload_capa field on rte_eth_dev_info
+ * structure are allowed to be set.
+ */
+ uint64_t offloads;
+
+ /* For i40e specifically */
+ uint16_t pvid;
+ __extension__
+ uint8_t hw_vlan_reject_tagged : 1,
+ /**< If set, reject sending out tagged pkts */
+ hw_vlan_reject_untagged : 1,
+ /**< If set, reject sending out untagged pkts */
+ hw_vlan_insert_pvid : 1;
+ /**< If set, enable port based VLAN insertion */
+};
+
+/**
+ * A structure used to configure an RX ring of an Ethernet port.
+ */
+struct rte_eth_rxconf {
+ struct rte_eth_thresh rx_thresh; /**< RX ring threshold registers. */
+ uint16_t rx_free_thresh; /**< Drives the freeing of RX descriptors. */
+ uint8_t rx_drop_en; /**< Drop packets if no descriptors are available. */
+ uint8_t rx_deferred_start; /**< Do not start queue with rte_eth_dev_start(). */
+ /**
+ * Per-queue Rx offloads to be set using DEV_RX_OFFLOAD_* flags.
+ * Only offloads set on rx_queue_offload_capa or rx_offload_capa
+ * fields on rte_eth_dev_info structure are allowed to be set.
+ */
+ uint64_t offloads;
+};
+
+/**
+ * A structure used to configure a TX ring of an Ethernet port.
+ */
+struct rte_eth_txconf {
+ struct rte_eth_thresh tx_thresh; /**< TX ring threshold registers. */
+ uint16_t tx_rs_thresh; /**< Drives the setting of RS bit on TXDs. */
+ uint16_t tx_free_thresh; /**< Start freeing TX buffers if there are
+ less free descriptors than this value. */
+
+ uint8_t tx_deferred_start; /**< Do not start queue with rte_eth_dev_start(). */
+ /**
+ * Per-queue Tx offloads to be set using DEV_TX_OFFLOAD_* flags.
+ * Only offloads set on tx_queue_offload_capa or tx_offload_capa
+ * fields on rte_eth_dev_info structure are allowed to be set.
+ */
+ uint64_t offloads;
+};
+
+/**
+ * A structure contains information about HW descriptor ring limitations.
+ */
+struct rte_eth_desc_lim {
+ uint16_t nb_max; /**< Max allowed number of descriptors. */
+ uint16_t nb_min; /**< Min allowed number of descriptors. */
+ uint16_t nb_align; /**< Number of descriptors should be aligned to. */
+
+ /**
+ * Max allowed number of segments per whole packet.
+ *
+ * - For TSO packet this is the total number of data descriptors allowed
+ * by device.
+ *
+ * @see nb_mtu_seg_max
+ */
+ uint16_t nb_seg_max;
+
+ /**
+ * Max number of segments per one MTU.
+ *
+ * - For non-TSO packet, this is the maximum allowed number of segments
+ * in a single transmit packet.
+ *
+ * - For TSO packet each segment within the TSO may span up to this
+ * value.
+ *
+ * @see nb_seg_max
+ */
+ uint16_t nb_mtu_seg_max;
+};
+
+/**
+ * This enum indicates the flow control mode
+ */
+enum rte_eth_fc_mode {
+ RTE_FC_NONE = 0, /**< Disable flow control. */
+ RTE_FC_RX_PAUSE, /**< RX pause frame, enable flowctrl on TX side. */
+ RTE_FC_TX_PAUSE, /**< TX pause frame, enable flowctrl on RX side. */
+ RTE_FC_FULL /**< Enable flow control on both side. */
+};
+
+/**
+ * A structure used to configure Ethernet flow control parameter.
+ * These parameters will be configured into the register of the NIC.
+ * Please refer to the corresponding data sheet for proper value.
+ */
+struct rte_eth_fc_conf {
+ uint32_t high_water; /**< High threshold value to trigger XOFF */
+ uint32_t low_water; /**< Low threshold value to trigger XON */
+ uint16_t pause_time; /**< Pause quota in the Pause frame */
+ uint16_t send_xon; /**< Is XON frame need be sent */
+ enum rte_eth_fc_mode mode; /**< Link flow control mode */
+ uint8_t mac_ctrl_frame_fwd; /**< Forward MAC control frames */
+ uint8_t autoneg; /**< Use Pause autoneg */
+};
+
+/**
+ * A structure used to configure Ethernet priority flow control parameter.
+ * These parameters will be configured into the register of the NIC.
+ * Please refer to the corresponding data sheet for proper value.
+ */
+struct rte_eth_pfc_conf {
+ struct rte_eth_fc_conf fc; /**< General flow control parameter. */
+ uint8_t priority; /**< VLAN User Priority. */
+};
+
+/**
+ * Memory space that can be configured to store Flow Director filters
+ * in the board memory.
+ */
+enum rte_fdir_pballoc_type {
+ RTE_FDIR_PBALLOC_64K = 0, /**< 64k. */
+ RTE_FDIR_PBALLOC_128K, /**< 128k. */
+ RTE_FDIR_PBALLOC_256K, /**< 256k. */
+};
+
+/**
+ * Select report mode of FDIR hash information in RX descriptors.
+ */
+enum rte_fdir_status_mode {
+ RTE_FDIR_NO_REPORT_STATUS = 0, /**< Never report FDIR hash. */
+ RTE_FDIR_REPORT_STATUS, /**< Only report FDIR hash for matching pkts. */
+ RTE_FDIR_REPORT_STATUS_ALWAYS, /**< Always report FDIR hash. */
+};
+
+/**
+ * A structure used to configure the Flow Director (FDIR) feature
+ * of an Ethernet port.
+ *
+ * If mode is RTE_FDIR_DISABLE, the pballoc value is ignored.
+ */
+struct rte_fdir_conf {
+ enum rte_fdir_mode mode; /**< Flow Director mode. */
+ enum rte_fdir_pballoc_type pballoc; /**< Space for FDIR filters. */
+ enum rte_fdir_status_mode status; /**< How to report FDIR hash. */
+ /** RX queue of packets matching a "drop" filter in perfect mode. */
+ uint8_t drop_queue;
+ struct rte_eth_fdir_masks mask;
+ struct rte_eth_fdir_flex_conf flex_conf;
+ /**< Flex payload configuration. */
+};
+
+/**
+ * UDP tunneling configuration.
+ * Used to config the UDP port for a type of tunnel.
+ * NICs need the UDP port to identify the tunnel type.
+ * Normally a type of tunnel has a default UDP port, this structure can be used
+ * in case if the users want to change or support more UDP port.
+ */
+struct rte_eth_udp_tunnel {
+ uint16_t udp_port; /**< UDP port used for the tunnel. */
+ uint8_t prot_type; /**< Tunnel type. Defined in rte_eth_tunnel_type. */
+};
+
+/**
+ * A structure used to enable/disable specific device interrupts.
+ */
+struct rte_intr_conf {
+ /** enable/disable lsc interrupt. 0 (default) - disable, 1 enable */
+ uint32_t lsc:1;
+ /** enable/disable rxq interrupt. 0 (default) - disable, 1 enable */
+ uint32_t rxq:1;
+ /** enable/disable rmv interrupt. 0 (default) - disable, 1 enable */
+ uint32_t rmv:1;
+};
+
+/**
+ * A structure used to configure an Ethernet port.
+ * Depending upon the RX multi-queue mode, extra advanced
+ * configuration settings may be needed.
+ */
+struct rte_eth_conf {
+ uint32_t link_speeds; /**< bitmap of ETH_LINK_SPEED_XXX of speeds to be
+ used. ETH_LINK_SPEED_FIXED disables link
+ autonegotiation, and a unique speed shall be
+ set. Otherwise, the bitmap defines the set of
+ speeds to be advertised. If the special value
+ ETH_LINK_SPEED_AUTONEG (0) is used, all speeds
+ supported are advertised. */
+ struct rte_eth_rxmode rxmode; /**< Port RX configuration. */
+ struct rte_eth_txmode txmode; /**< Port TX configuration. */
+ uint32_t lpbk_mode; /**< Loopback operation mode. By default the value
+ is 0, meaning the loopback mode is disabled.
+ Read the datasheet of given ethernet controller
+ for details. The possible values of this field
+ are defined in implementation of each driver. */
+ struct {
+ struct rte_eth_rss_conf rss_conf; /**< Port RSS configuration */
+ struct rte_eth_vmdq_dcb_conf vmdq_dcb_conf;
+ /**< Port vmdq+dcb configuration. */
+ struct rte_eth_dcb_rx_conf dcb_rx_conf;
+ /**< Port dcb RX configuration. */
+ struct rte_eth_vmdq_rx_conf vmdq_rx_conf;
+ /**< Port vmdq RX configuration. */
+ } rx_adv_conf; /**< Port RX filtering configuration. */
+ union {
+ struct rte_eth_vmdq_dcb_tx_conf vmdq_dcb_tx_conf;
+ /**< Port vmdq+dcb TX configuration. */
+ struct rte_eth_dcb_tx_conf dcb_tx_conf;
+ /**< Port dcb TX configuration. */
+ struct rte_eth_vmdq_tx_conf vmdq_tx_conf;
+ /**< Port vmdq TX configuration. */
+ } tx_adv_conf; /**< Port TX DCB configuration (union). */
+ /** Currently,Priority Flow Control(PFC) are supported,if DCB with PFC
+ is needed,and the variable must be set ETH_DCB_PFC_SUPPORT. */
+ uint32_t dcb_capability_en;
+ struct rte_fdir_conf fdir_conf; /**< FDIR configuration. */
+ struct rte_intr_conf intr_conf; /**< Interrupt mode configuration. */
+};
+
+/**
+ * A structure used to retrieve the contextual information of
+ * an Ethernet device, such as the controlling driver of the device,
+ * its PCI context, etc...
+ */
+
+/**
+ * RX offload capabilities of a device.
+ */
+#define DEV_RX_OFFLOAD_VLAN_STRIP 0x00000001
+#define DEV_RX_OFFLOAD_IPV4_CKSUM 0x00000002
+#define DEV_RX_OFFLOAD_UDP_CKSUM 0x00000004
+#define DEV_RX_OFFLOAD_TCP_CKSUM 0x00000008
+#define DEV_RX_OFFLOAD_TCP_LRO 0x00000010
+#define DEV_RX_OFFLOAD_QINQ_STRIP 0x00000020
+#define DEV_RX_OFFLOAD_OUTER_IPV4_CKSUM 0x00000040
+#define DEV_RX_OFFLOAD_MACSEC_STRIP 0x00000080
+#define DEV_RX_OFFLOAD_HEADER_SPLIT 0x00000100
+#define DEV_RX_OFFLOAD_VLAN_FILTER 0x00000200
+#define DEV_RX_OFFLOAD_VLAN_EXTEND 0x00000400
+#define DEV_RX_OFFLOAD_JUMBO_FRAME 0x00000800
+#define DEV_RX_OFFLOAD_CRC_STRIP 0x00001000
+#define DEV_RX_OFFLOAD_SCATTER 0x00002000
+#define DEV_RX_OFFLOAD_TIMESTAMP 0x00004000
+#define DEV_RX_OFFLOAD_SECURITY 0x00008000
+
+/**
+ * Invalid to set both DEV_RX_OFFLOAD_CRC_STRIP and DEV_RX_OFFLOAD_KEEP_CRC
+ * No DEV_RX_OFFLOAD_CRC_STRIP flag means keep CRC
+ */
+#define DEV_RX_OFFLOAD_KEEP_CRC 0x00010000
+#define DEV_RX_OFFLOAD_CHECKSUM (DEV_RX_OFFLOAD_IPV4_CKSUM | \
+ DEV_RX_OFFLOAD_UDP_CKSUM | \
+ DEV_RX_OFFLOAD_TCP_CKSUM)
+#define DEV_RX_OFFLOAD_VLAN (DEV_RX_OFFLOAD_VLAN_STRIP | \
+ DEV_RX_OFFLOAD_VLAN_FILTER | \
+ DEV_RX_OFFLOAD_VLAN_EXTEND)
+
+/*
+ * If new Rx offload capabilities are defined, they also must be
+ * mentioned in rte_rx_offload_names in rte_ethdev.c file.
+ */
+
+/**
+ * TX offload capabilities of a device.
+ */
+#define DEV_TX_OFFLOAD_VLAN_INSERT 0x00000001
+#define DEV_TX_OFFLOAD_IPV4_CKSUM 0x00000002
+#define DEV_TX_OFFLOAD_UDP_CKSUM 0x00000004
+#define DEV_TX_OFFLOAD_TCP_CKSUM 0x00000008
+#define DEV_TX_OFFLOAD_SCTP_CKSUM 0x00000010
+#define DEV_TX_OFFLOAD_TCP_TSO 0x00000020
+#define DEV_TX_OFFLOAD_UDP_TSO 0x00000040
+#define DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM 0x00000080 /**< Used for tunneling packet. */
+#define DEV_TX_OFFLOAD_QINQ_INSERT 0x00000100
+#define DEV_TX_OFFLOAD_VXLAN_TNL_TSO 0x00000200 /**< Used for tunneling packet. */
+#define DEV_TX_OFFLOAD_GRE_TNL_TSO 0x00000400 /**< Used for tunneling packet. */
+#define DEV_TX_OFFLOAD_IPIP_TNL_TSO 0x00000800 /**< Used for tunneling packet. */
+#define DEV_TX_OFFLOAD_GENEVE_TNL_TSO 0x00001000 /**< Used for tunneling packet. */
+#define DEV_TX_OFFLOAD_MACSEC_INSERT 0x00002000
+#define DEV_TX_OFFLOAD_MT_LOCKFREE 0x00004000
+/**< Multiple threads can invoke rte_eth_tx_burst() concurrently on the same
+ * tx queue without SW lock.
+ */
+#define DEV_TX_OFFLOAD_MULTI_SEGS 0x00008000
+/**< Device supports multi segment send. */
+#define DEV_TX_OFFLOAD_MBUF_FAST_FREE 0x00010000
+/**< Device supports optimization for fast release of mbufs.
+ * When set application must guarantee that per-queue all mbufs comes from
+ * the same mempool and has refcnt = 1.
+ */
+#define DEV_TX_OFFLOAD_SECURITY 0x00020000
+/**
+ * Device supports generic UDP tunneled packet TSO.
+ * Application must set PKT_TX_TUNNEL_UDP and other mbuf fields required
+ * for tunnel TSO.
+ */
+#define DEV_TX_OFFLOAD_UDP_TNL_TSO 0x00040000
+/**
+ * Device supports generic IP tunneled packet TSO.
+ * Application must set PKT_TX_TUNNEL_IP and other mbuf fields required
+ * for tunnel TSO.
+ */
+#define DEV_TX_OFFLOAD_IP_TNL_TSO 0x00080000
+
+#define RTE_ETH_DEV_CAPA_RUNTIME_RX_QUEUE_SETUP 0x00000001
+/**< Device supports Rx queue setup after device started*/
+#define RTE_ETH_DEV_CAPA_RUNTIME_TX_QUEUE_SETUP 0x00000002
+/**< Device supports Tx queue setup after device started*/
+
+/*
+ * If new Tx offload capabilities are defined, they also must be
+ * mentioned in rte_tx_offload_names in rte_ethdev.c file.
+ */
+
+/*
+ * Fallback default preferred Rx/Tx port parameters.
+ * These are used if an application requests default parameters
+ * but the PMD does not provide preferred values.
+ */
+#define RTE_ETH_DEV_FALLBACK_RX_RINGSIZE 512
+#define RTE_ETH_DEV_FALLBACK_TX_RINGSIZE 512
+#define RTE_ETH_DEV_FALLBACK_RX_NBQUEUES 1
+#define RTE_ETH_DEV_FALLBACK_TX_NBQUEUES 1
+
+/**
+ * Preferred Rx/Tx port parameters.
+ * There are separate instances of this structure for transmission
+ * and reception respectively.
+ */
+struct rte_eth_dev_portconf {
+ uint16_t burst_size; /**< Device-preferred burst size */
+ uint16_t ring_size; /**< Device-preferred size of queue rings */
+ uint16_t nb_queues; /**< Device-preferred number of queues */
+};
+
+/**
+ * Default values for switch domain id when ethdev does not support switch
+ * domain definitions.
+ */
+#define RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID (0)
+
+/**
+ * Ethernet device associated switch information
+ */
+struct rte_eth_switch_info {
+ const char *name; /**< switch name */
+ uint16_t domain_id; /**< switch domain id */
+ uint16_t port_id;
+ /**<
+ * mapping to the devices physical switch port as enumerated from the
+ * perspective of the embedded interconnect/switch. For SR-IOV enabled
+ * device this may correspond to the VF_ID of each virtual function,
+ * but each driver should explicitly define the mapping of switch
+ * port identifier to that physical interconnect/switch
+ */
+};
+
+/**
+ * Ethernet device information
+ */
+struct rte_eth_dev_info {
+ struct rte_device *device; /** Generic device information */
+ const char *driver_name; /**< Device Driver name. */
+ unsigned int if_index; /**< Index to bound host interface, or 0 if none.
+ Use if_indextoname() to translate into an interface name. */
+ const uint32_t *dev_flags; /**< Device flags */
+ uint32_t min_rx_bufsize; /**< Minimum size of RX buffer. */
+ uint32_t max_rx_pktlen; /**< Maximum configurable length of RX pkt. */
+ uint16_t max_rx_queues; /**< Maximum number of RX queues. */
+ uint16_t max_tx_queues; /**< Maximum number of TX queues. */
+ uint32_t max_mac_addrs; /**< Maximum number of MAC addresses. */
+ uint32_t max_hash_mac_addrs;
+ /** Maximum number of hash MAC addresses for MTA and UTA. */
+ uint16_t max_vfs; /**< Maximum number of VFs. */
+ uint16_t max_vmdq_pools; /**< Maximum number of VMDq pools. */
+ uint64_t rx_offload_capa;
+ /**< All RX offload capabilities including all per-queue ones */
+ uint64_t tx_offload_capa;
+ /**< All TX offload capabilities including all per-queue ones */
+ uint64_t rx_queue_offload_capa;
+ /**< Device per-queue RX offload capabilities. */
+ uint64_t tx_queue_offload_capa;
+ /**< Device per-queue TX offload capabilities. */
+ uint16_t reta_size;
+ /**< Device redirection table size, the total number of entries. */
+ uint8_t hash_key_size; /**< Hash key size in bytes */
+ /** Bit mask of RSS offloads, the bit offset also means flow type */
+ uint64_t flow_type_rss_offloads;
+ struct rte_eth_rxconf default_rxconf; /**< Default RX configuration */
+ struct rte_eth_txconf default_txconf; /**< Default TX configuration */
+ uint16_t vmdq_queue_base; /**< First queue ID for VMDQ pools. */
+ uint16_t vmdq_queue_num; /**< Queue number for VMDQ pools. */
+ uint16_t vmdq_pool_base; /**< First ID of VMDQ pools. */
+ struct rte_eth_desc_lim rx_desc_lim; /**< RX descriptors limits */
+ struct rte_eth_desc_lim tx_desc_lim; /**< TX descriptors limits */
+ uint32_t speed_capa; /**< Supported speeds bitmap (ETH_LINK_SPEED_). */
+ /** Configured number of rx/tx queues */
+ uint16_t nb_rx_queues; /**< Number of RX queues. */
+ uint16_t nb_tx_queues; /**< Number of TX queues. */
+ /** Rx parameter recommendations */
+ struct rte_eth_dev_portconf default_rxportconf;
+ /** Tx parameter recommendations */
+ struct rte_eth_dev_portconf default_txportconf;
+ /** Generic device capabilities (RTE_ETH_DEV_CAPA_). */
+ uint64_t dev_capa;
+ /**
+ * Switching information for ports on a device with a
+ * embedded managed interconnect/switch.
+ */
+ struct rte_eth_switch_info switch_info;
+};
+
+/**
+ * Ethernet device RX queue information structure.
+ * Used to retieve information about configured queue.
+ */
+struct rte_eth_rxq_info {
+ struct rte_mempool *mp; /**< mempool used by that queue. */
+ struct rte_eth_rxconf conf; /**< queue config parameters. */
+ uint8_t scattered_rx; /**< scattered packets RX supported. */
+ uint16_t nb_desc; /**< configured number of RXDs. */
+} __rte_cache_min_aligned;
+
+/**
+ * Ethernet device TX queue information structure.
+ * Used to retrieve information about configured queue.
+ */
+struct rte_eth_txq_info {
+ struct rte_eth_txconf conf; /**< queue config parameters. */
+ uint16_t nb_desc; /**< configured number of TXDs. */
+} __rte_cache_min_aligned;
+
+/** Maximum name length for extended statistics counters */
+#define RTE_ETH_XSTATS_NAME_SIZE 64
+
+/**
+ * An Ethernet device extended statistic structure
+ *
+ * This structure is used by rte_eth_xstats_get() to provide
+ * statistics that are not provided in the generic *rte_eth_stats*
+ * structure.
+ * It maps a name id, corresponding to an index in the array returned
+ * by rte_eth_xstats_get_names(), to a statistic value.
+ */
+struct rte_eth_xstat {
+ uint64_t id; /**< The index in xstats name array. */
+ uint64_t value; /**< The statistic counter value. */
+};
+
+/**
+ * A name element for extended statistics.
+ *
+ * An array of this structure is returned by rte_eth_xstats_get_names().
+ * It lists the names of extended statistics for a PMD. The *rte_eth_xstat*
+ * structure references these names by their array index.
+ */
+struct rte_eth_xstat_name {
+ char name[RTE_ETH_XSTATS_NAME_SIZE]; /**< The statistic name. */
+};
+
+#define ETH_DCB_NUM_TCS 8
+#define ETH_MAX_VMDQ_POOL 64
+
+/**
+ * A structure used to get the information of queue and
+ * TC mapping on both TX and RX paths.
+ */
+struct rte_eth_dcb_tc_queue_mapping {
+ /** rx queues assigned to tc per Pool */
+ struct {
+ uint8_t base;
+ uint8_t nb_queue;
+ } tc_rxq[ETH_MAX_VMDQ_POOL][ETH_DCB_NUM_TCS];
+ /** rx queues assigned to tc per Pool */
+ struct {
+ uint8_t base;
+ uint8_t nb_queue;
+ } tc_txq[ETH_MAX_VMDQ_POOL][ETH_DCB_NUM_TCS];
+};
+
+/**
+ * A structure used to get the information of DCB.
+ * It includes TC UP mapping and queue TC mapping.
+ */
+struct rte_eth_dcb_info {
+ uint8_t nb_tcs; /**< number of TCs */
+ uint8_t prio_tc[ETH_DCB_NUM_USER_PRIORITIES]; /**< Priority to tc */
+ uint8_t tc_bws[ETH_DCB_NUM_TCS]; /**< TX BW percentage for each TC */
+ /** rx queues assigned to tc */
+ struct rte_eth_dcb_tc_queue_mapping tc_queue;
+};
+
+/**
+ * RX/TX queue states
+ */
+#define RTE_ETH_QUEUE_STATE_STOPPED 0
+#define RTE_ETH_QUEUE_STATE_STARTED 1
+
+#define RTE_ETH_ALL RTE_MAX_ETHPORTS
+
+/* Macros to check for valid port */
+#define RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, retval) do { \
+ if (!rte_eth_dev_is_valid_port(port_id)) { \
+ RTE_ETHDEV_LOG(ERR, "Invalid port_id=%u\n", port_id); \
+ return retval; \
+ } \
+} while (0)
+
+#define RTE_ETH_VALID_PORTID_OR_RET(port_id) do { \
+ if (!rte_eth_dev_is_valid_port(port_id)) { \
+ RTE_ETHDEV_LOG(ERR, "Invalid port_id=%u\n", port_id); \
+ return; \
+ } \
+} while (0)
+
+/**
+ * l2 tunnel configuration.
+ */
+
+/**< l2 tunnel enable mask */
+#define ETH_L2_TUNNEL_ENABLE_MASK 0x00000001
+/**< l2 tunnel insertion mask */
+#define ETH_L2_TUNNEL_INSERTION_MASK 0x00000002
+/**< l2 tunnel stripping mask */
+#define ETH_L2_TUNNEL_STRIPPING_MASK 0x00000004
+/**< l2 tunnel forwarding mask */
+#define ETH_L2_TUNNEL_FORWARDING_MASK 0x00000008
+
+/**
+ * Function type used for RX packet processing packet callbacks.
+ *
+ * The callback function is called on RX with a burst of packets that have
+ * been received on the given port and queue.
+ *
+ * @param port_id
+ * The Ethernet port on which RX is being performed.
+ * @param queue
+ * The queue on the Ethernet port which is being used to receive the packets.
+ * @param pkts
+ * The burst of packets that have just been received.
+ * @param nb_pkts
+ * The number of packets in the burst pointed to by "pkts".
+ * @param max_pkts
+ * The max number of packets that can be stored in the "pkts" array.
+ * @param user_param
+ * The arbitrary user parameter passed in by the application when the callback
+ * was originally configured.
+ * @return
+ * The number of packets returned to the user.
+ */
+typedef uint16_t (*rte_rx_callback_fn)(uint16_t port_id, uint16_t queue,
+ struct rte_mbuf *pkts[], uint16_t nb_pkts, uint16_t max_pkts,
+ void *user_param);
+
+/**
+ * Function type used for TX packet processing packet callbacks.
+ *
+ * The callback function is called on TX with a burst of packets immediately
+ * before the packets are put onto the hardware queue for transmission.
+ *
+ * @param port_id
+ * The Ethernet port on which TX is being performed.
+ * @param queue
+ * The queue on the Ethernet port which is being used to transmit the packets.
+ * @param pkts
+ * The burst of packets that are about to be transmitted.
+ * @param nb_pkts
+ * The number of packets in the burst pointed to by "pkts".
+ * @param user_param
+ * The arbitrary user parameter passed in by the application when the callback
+ * was originally configured.
+ * @return
+ * The number of packets to be written to the NIC.
+ */
+typedef uint16_t (*rte_tx_callback_fn)(uint16_t port_id, uint16_t queue,
+ struct rte_mbuf *pkts[], uint16_t nb_pkts, void *user_param);
+
+/**
+ * Possible states of an ethdev port.
+ */
+enum rte_eth_dev_state {
+ /** Device is unused before being probed. */
+ RTE_ETH_DEV_UNUSED = 0,
+ /** Device is attached when allocated in probing. */
+ RTE_ETH_DEV_ATTACHED,
+ /** The deferred state is useless and replaced by ownership. */
+ RTE_ETH_DEV_DEFERRED,
+ /** Device is in removed state when plug-out is detected. */
+ RTE_ETH_DEV_REMOVED,
+};
+
+struct rte_eth_dev_sriov {
+ uint8_t active; /**< SRIOV is active with 16, 32 or 64 pools */
+ uint8_t nb_q_per_pool; /**< rx queue number per pool */
+ uint16_t def_vmdq_idx; /**< Default pool num used for PF */
+ uint16_t def_pool_q_idx; /**< Default pool queue start reg index */
+};
+#define RTE_ETH_DEV_SRIOV(dev) ((dev)->data->sriov)
+
+#define RTE_ETH_NAME_MAX_LEN RTE_DEV_NAME_MAX_LEN
+
+#define RTE_ETH_DEV_NO_OWNER 0
+
+#define RTE_ETH_MAX_OWNER_NAME_LEN 64
+
+struct rte_eth_dev_owner {
+ uint64_t id; /**< The owner unique identifier. */
+ char name[RTE_ETH_MAX_OWNER_NAME_LEN]; /**< The owner name. */
+};
+
+/** Device supports link state interrupt */
+#define RTE_ETH_DEV_INTR_LSC 0x0002
+/** Device is a bonded slave */
+#define RTE_ETH_DEV_BONDED_SLAVE 0x0004
+/** Device supports device removal interrupt */
+#define RTE_ETH_DEV_INTR_RMV 0x0008
+/** Device is port representor */
+#define RTE_ETH_DEV_REPRESENTOR 0x0010
+
+/**
+ * Iterates over valid ethdev ports owned by a specific owner.
+ *
+ * @param port_id
+ * The id of the next possible valid owned port.
+ * @param owner_id
+ * The owner identifier.
+ * RTE_ETH_DEV_NO_OWNER means iterate over all valid ownerless ports.
+ * @return
+ * Next valid port id owned by owner_id, RTE_MAX_ETHPORTS if there is none.
+ */
+uint64_t rte_eth_find_next_owned_by(uint16_t port_id,
+ const uint64_t owner_id);
+
+/**
+ * Macro to iterate over all enabled ethdev ports owned by a specific owner.
+ */
+#define RTE_ETH_FOREACH_DEV_OWNED_BY(p, o) \
+ for (p = rte_eth_find_next_owned_by(0, o); \
+ (unsigned int)p < (unsigned int)RTE_MAX_ETHPORTS; \
+ p = rte_eth_find_next_owned_by(p + 1, o))
+
+/**
+ * Iterates over valid ethdev ports.
+ *
+ * @param port_id
+ * The id of the next possible valid port.
+ * @return
+ * Next valid port id, RTE_MAX_ETHPORTS if there is none.
+ */
+uint16_t rte_eth_find_next(uint16_t port_id);
+
+/**
+ * Macro to iterate over all enabled and ownerless ethdev ports.
+ */
+#define RTE_ETH_FOREACH_DEV(p) \
+ RTE_ETH_FOREACH_DEV_OWNED_BY(p, RTE_ETH_DEV_NO_OWNER)
+
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Get a new unique owner identifier.
+ * An owner identifier is used to owns Ethernet devices by only one DPDK entity
+ * to avoid multiple management of device by different entities.
+ *
+ * @param owner_id
+ * Owner identifier pointer.
+ * @return
+ * Negative errno value on error, 0 on success.
+ */
+int __rte_experimental rte_eth_dev_owner_new(uint64_t *owner_id);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Set an Ethernet device owner.
+ *
+ * @param port_id
+ * The identifier of the port to own.
+ * @param owner
+ * The owner pointer.
+ * @return
+ * Negative errno value on error, 0 on success.
+ */
+int __rte_experimental rte_eth_dev_owner_set(const uint16_t port_id,
+ const struct rte_eth_dev_owner *owner);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Unset Ethernet device owner to make the device ownerless.
+ *
+ * @param port_id
+ * The identifier of port to make ownerless.
+ * @param owner_id
+ * The owner identifier.
+ * @return
+ * 0 on success, negative errno value on error.
+ */
+int __rte_experimental rte_eth_dev_owner_unset(const uint16_t port_id,
+ const uint64_t owner_id);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Remove owner from all Ethernet devices owned by a specific owner.
+ *
+ * @param owner_id
+ * The owner identifier.
+ */
+void __rte_experimental rte_eth_dev_owner_delete(const uint64_t owner_id);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Get the owner of an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier.
+ * @param owner
+ * The owner structure pointer to fill.
+ * @return
+ * 0 on success, negative errno value on error..
+ */
+int __rte_experimental rte_eth_dev_owner_get(const uint16_t port_id,
+ struct rte_eth_dev_owner *owner);
+
+/**
+ * Get the total number of Ethernet devices that have been successfully
+ * initialized by the matching Ethernet driver during the PCI probing phase
+ * and that are available for applications to use. These devices must be
+ * accessed by using the ``RTE_ETH_FOREACH_DEV()`` macro to deal with
+ * non-contiguous ranges of devices.
+ * These non-contiguous ranges can be created by calls to hotplug functions or
+ * by some PMDs.
+ *
+ * @return
+ * - The total number of usable Ethernet devices.
+ */
+__rte_deprecated
+uint16_t rte_eth_dev_count(void);
+
+/**
+ * Get the number of ports which are usable for the application.
+ *
+ * These devices must be iterated by using the macro
+ * ``RTE_ETH_FOREACH_DEV`` or ``RTE_ETH_FOREACH_DEV_OWNED_BY``
+ * to deal with non-contiguous ranges of devices.
+ *
+ * @return
+ * The count of available Ethernet devices.
+ */
+uint16_t rte_eth_dev_count_avail(void);
+
+/**
+ * Get the total number of ports which are allocated.
+ *
+ * Some devices may not be available for the application.
+ *
+ * @return
+ * The total count of Ethernet devices.
+ */
+uint16_t __rte_experimental rte_eth_dev_count_total(void);
+
+/**
+ * Attach a new Ethernet device specified by arguments.
+ *
+ * @param devargs
+ * A pointer to a strings array describing the new device
+ * to be attached. The strings should be a pci address like
+ * '0000:01:00.0' or virtual device name like 'net_pcap0'.
+ * @param port_id
+ * A pointer to a port identifier actually attached.
+ * @return
+ * 0 on success and port_id is filled, negative on error
+ */
+__rte_deprecated
+int rte_eth_dev_attach(const char *devargs, uint16_t *port_id);
+
+/**
+ * Detach a Ethernet device specified by port identifier.
+ * This function must be called when the device is in the
+ * closed state.
+ *
+ * @param port_id
+ * The port identifier of the device to detach.
+ * @param devname
+ * A pointer to a buffer that will be filled with the device name.
+ * This buffer must be at least RTE_DEV_NAME_MAX_LEN long.
+ * @return
+ * 0 on success and devname is filled, negative on error
+ */
+__rte_deprecated
+int rte_eth_dev_detach(uint16_t port_id, char *devname);
+
+/**
+ * Convert a numerical speed in Mbps to a bitmap flag that can be used in
+ * the bitmap link_speeds of the struct rte_eth_conf
+ *
+ * @param speed
+ * Numerical speed value in Mbps
+ * @param duplex
+ * ETH_LINK_[HALF/FULL]_DUPLEX (only for 10/100M speeds)
+ * @return
+ * 0 if the speed cannot be mapped
+ */
+uint32_t rte_eth_speed_bitflag(uint32_t speed, int duplex);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Get DEV_RX_OFFLOAD_* flag name.
+ *
+ * @param offload
+ * Offload flag.
+ * @return
+ * Offload name or 'UNKNOWN' if the flag cannot be recognised.
+ */
+const char * __rte_experimental rte_eth_dev_rx_offload_name(uint64_t offload);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Get DEV_TX_OFFLOAD_* flag name.
+ *
+ * @param offload
+ * Offload flag.
+ * @return
+ * Offload name or 'UNKNOWN' if the flag cannot be recognised.
+ */
+const char * __rte_experimental rte_eth_dev_tx_offload_name(uint64_t offload);
+
+/**
+ * Configure an Ethernet device.
+ * This function must be invoked first before any other function in the
+ * Ethernet API. This function can also be re-invoked when a device is in the
+ * stopped state.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device to configure.
+ * @param nb_rx_queue
+ * The number of receive queues to set up for the Ethernet device.
+ * @param nb_tx_queue
+ * The number of transmit queues to set up for the Ethernet device.
+ * @param eth_conf
+ * The pointer to the configuration data to be used for the Ethernet device.
+ * The *rte_eth_conf* structure includes:
+ * - the hardware offload features to activate, with dedicated fields for
+ * each statically configurable offload hardware feature provided by
+ * Ethernet devices, such as IP checksum or VLAN tag stripping for
+ * example.
+ * The Rx offload bitfield API is obsolete and will be deprecated.
+ * Applications should set the ignore_bitfield_offloads bit on *rxmode*
+ * structure and use offloads field to set per-port offloads instead.
+ * - Any offloading set in eth_conf->[rt]xmode.offloads must be within
+ * the [rt]x_offload_capa returned from rte_eth_dev_infos_get().
+ * Any type of device supported offloading set in the input argument
+ * eth_conf->[rt]xmode.offloads to rte_eth_dev_configure() is enabled
+ * on all queues and it can't be disabled in rte_eth_[rt]x_queue_setup()
+ * - the Receive Side Scaling (RSS) configuration when using multiple RX
+ * queues per port. Any RSS hash function set in eth_conf->rss_conf.rss_hf
+ * must be within the flow_type_rss_offloads provided by drivers via
+ * rte_eth_dev_infos_get() API.
+ *
+ * Embedding all configuration information in a single data structure
+ * is the more flexible method that allows the addition of new features
+ * without changing the syntax of the API.
+ * @return
+ * - 0: Success, device configured.
+ * - <0: Error code returned by the driver configuration function.
+ */
+int rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_queue,
+ uint16_t nb_tx_queue, const struct rte_eth_conf *eth_conf);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Check if an Ethernet device was physically removed.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @return
+ * 1 when the Ethernet device is removed, otherwise 0.
+ */
+int __rte_experimental
+rte_eth_dev_is_removed(uint16_t port_id);
+
+/**
+ * Allocate and set up a receive queue for an Ethernet device.
+ *
+ * The function allocates a contiguous block of memory for *nb_rx_desc*
+ * receive descriptors from a memory zone associated with *socket_id*
+ * and initializes each receive descriptor with a network buffer allocated
+ * from the memory pool *mb_pool*.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param rx_queue_id
+ * The index of the receive queue to set up.
+ * The value must be in the range [0, nb_rx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @param nb_rx_desc
+ * The number of receive descriptors to allocate for the receive ring.
+ * @param socket_id
+ * The *socket_id* argument is the socket identifier in case of NUMA.
+ * The value can be *SOCKET_ID_ANY* if there is no NUMA constraint for
+ * the DMA memory allocated for the receive descriptors of the ring.
+ * @param rx_conf
+ * The pointer to the configuration data to be used for the receive queue.
+ * NULL value is allowed, in which case default RX configuration
+ * will be used.
+ * The *rx_conf* structure contains an *rx_thresh* structure with the values
+ * of the Prefetch, Host, and Write-Back threshold registers of the receive
+ * ring.
+ * In addition it contains the hardware offloads features to activate using
+ * the DEV_RX_OFFLOAD_* flags.
+ * If an offloading set in rx_conf->offloads
+ * hasn't been set in the input argument eth_conf->rxmode.offloads
+ * to rte_eth_dev_configure(), it is a new added offloading, it must be
+ * per-queue type and it is enabled for the queue.
+ * No need to repeat any bit in rx_conf->offloads which has already been
+ * enabled in rte_eth_dev_configure() at port level. An offloading enabled
+ * at port level can't be disabled at queue level.
+ * @param mb_pool
+ * The pointer to the memory pool from which to allocate *rte_mbuf* network
+ * memory buffers to populate each descriptor of the receive ring.
+ * @return
+ * - 0: Success, receive queue correctly set up.
+ * - -EIO: if device is removed.
+ * - -EINVAL: The size of network buffers which can be allocated from the
+ * memory pool does not fit the various buffer sizes allowed by the
+ * device controller.
+ * - -ENOMEM: Unable to allocate the receive ring descriptors or to
+ * allocate network memory buffers from the memory pool when
+ * initializing receive descriptors.
+ */
+int rte_eth_rx_queue_setup(uint16_t port_id, uint16_t rx_queue_id,
+ uint16_t nb_rx_desc, unsigned int socket_id,
+ const struct rte_eth_rxconf *rx_conf,
+ struct rte_mempool *mb_pool);
+
+/**
+ * Allocate and set up a transmit queue for an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param tx_queue_id
+ * The index of the transmit queue to set up.
+ * The value must be in the range [0, nb_tx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @param nb_tx_desc
+ * The number of transmit descriptors to allocate for the transmit ring.
+ * @param socket_id
+ * The *socket_id* argument is the socket identifier in case of NUMA.
+ * Its value can be *SOCKET_ID_ANY* if there is no NUMA constraint for
+ * the DMA memory allocated for the transmit descriptors of the ring.
+ * @param tx_conf
+ * The pointer to the configuration data to be used for the transmit queue.
+ * NULL value is allowed, in which case default TX configuration
+ * will be used.
+ * The *tx_conf* structure contains the following data:
+ * - The *tx_thresh* structure with the values of the Prefetch, Host, and
+ * Write-Back threshold registers of the transmit ring.
+ * When setting Write-Back threshold to the value greater then zero,
+ * *tx_rs_thresh* value should be explicitly set to one.
+ * - The *tx_free_thresh* value indicates the [minimum] number of network
+ * buffers that must be pending in the transmit ring to trigger their
+ * [implicit] freeing by the driver transmit function.
+ * - The *tx_rs_thresh* value indicates the [minimum] number of transmit
+ * descriptors that must be pending in the transmit ring before setting the
+ * RS bit on a descriptor by the driver transmit function.
+ * The *tx_rs_thresh* value should be less or equal then
+ * *tx_free_thresh* value, and both of them should be less then
+ * *nb_tx_desc* - 3.
+ * - The *offloads* member contains Tx offloads to be enabled.
+ * If an offloading set in tx_conf->offloads
+ * hasn't been set in the input argument eth_conf->txmode.offloads
+ * to rte_eth_dev_configure(), it is a new added offloading, it must be
+ * per-queue type and it is enabled for the queue.
+ * No need to repeat any bit in tx_conf->offloads which has already been
+ * enabled in rte_eth_dev_configure() at port level. An offloading enabled
+ * at port level can't be disabled at queue level.
+ *
+ * Note that setting *tx_free_thresh* or *tx_rs_thresh* value to 0 forces
+ * the transmit function to use default values.
+ * @return
+ * - 0: Success, the transmit queue is correctly set up.
+ * - -ENOMEM: Unable to allocate the transmit ring descriptors.
+ */
+int rte_eth_tx_queue_setup(uint16_t port_id, uint16_t tx_queue_id,
+ uint16_t nb_tx_desc, unsigned int socket_id,
+ const struct rte_eth_txconf *tx_conf);
+
+/**
+ * Return the NUMA socket to which an Ethernet device is connected
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device
+ * @return
+ * The NUMA socket id to which the Ethernet device is connected or
+ * a default of zero if the socket could not be determined.
+ * -1 is returned is the port_id value is out of range.
+ */
+int rte_eth_dev_socket_id(uint16_t port_id);
+
+/**
+ * Check if port_id of device is attached
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device
+ * @return
+ * - 0 if port is out of range or not attached
+ * - 1 if device is attached
+ */
+int rte_eth_dev_is_valid_port(uint16_t port_id);
+
+/**
+ * Start specified RX queue of a port. It is used when rx_deferred_start
+ * flag of the specified queue is true.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device
+ * @param rx_queue_id
+ * The index of the rx queue to update the ring.
+ * The value must be in the range [0, nb_rx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @return
+ * - 0: Success, the receive queue is started.
+ * - -EINVAL: The port_id or the queue_id out of range.
+ * - -EIO: if device is removed.
+ * - -ENOTSUP: The function not supported in PMD driver.
+ */
+int rte_eth_dev_rx_queue_start(uint16_t port_id, uint16_t rx_queue_id);
+
+/**
+ * Stop specified RX queue of a port
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device
+ * @param rx_queue_id
+ * The index of the rx queue to update the ring.
+ * The value must be in the range [0, nb_rx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @return
+ * - 0: Success, the receive queue is stopped.
+ * - -EINVAL: The port_id or the queue_id out of range.
+ * - -EIO: if device is removed.
+ * - -ENOTSUP: The function not supported in PMD driver.
+ */
+int rte_eth_dev_rx_queue_stop(uint16_t port_id, uint16_t rx_queue_id);
+
+/**
+ * Start TX for specified queue of a port. It is used when tx_deferred_start
+ * flag of the specified queue is true.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device
+ * @param tx_queue_id
+ * The index of the tx queue to update the ring.
+ * The value must be in the range [0, nb_tx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @return
+ * - 0: Success, the transmit queue is started.
+ * - -EINVAL: The port_id or the queue_id out of range.
+ * - -EIO: if device is removed.
+ * - -ENOTSUP: The function not supported in PMD driver.
+ */
+int rte_eth_dev_tx_queue_start(uint16_t port_id, uint16_t tx_queue_id);
+
+/**
+ * Stop specified TX queue of a port
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device
+ * @param tx_queue_id
+ * The index of the tx queue to update the ring.
+ * The value must be in the range [0, nb_tx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @return
+ * - 0: Success, the transmit queue is stopped.
+ * - -EINVAL: The port_id or the queue_id out of range.
+ * - -EIO: if device is removed.
+ * - -ENOTSUP: The function not supported in PMD driver.
+ */
+int rte_eth_dev_tx_queue_stop(uint16_t port_id, uint16_t tx_queue_id);
+
+/**
+ * Start an Ethernet device.
+ *
+ * The device start step is the last one and consists of setting the configured
+ * offload features and in starting the transmit and the receive units of the
+ * device.
+ * On success, all basic functions exported by the Ethernet API (link status,
+ * receive/transmit, and so on) can be invoked.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @return
+ * - 0: Success, Ethernet device started.
+ * - <0: Error code of the driver device start function.
+ */
+int rte_eth_dev_start(uint16_t port_id);
+
+/**
+ * Stop an Ethernet device. The device can be restarted with a call to
+ * rte_eth_dev_start()
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ */
+void rte_eth_dev_stop(uint16_t port_id);
+
+/**
+ * Link up an Ethernet device.
+ *
+ * Set device link up will re-enable the device rx/tx
+ * functionality after it is previously set device linked down.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @return
+ * - 0: Success, Ethernet device linked up.
+ * - <0: Error code of the driver device link up function.
+ */
+int rte_eth_dev_set_link_up(uint16_t port_id);
+
+/**
+ * Link down an Ethernet device.
+ * The device rx/tx functionality will be disabled if success,
+ * and it can be re-enabled with a call to
+ * rte_eth_dev_set_link_up()
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ */
+int rte_eth_dev_set_link_down(uint16_t port_id);
+
+/**
+ * Close a stopped Ethernet device. The device cannot be restarted!
+ * The function frees all resources except for needed by the
+ * closed state. To free these resources, call rte_eth_dev_detach().
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ */
+void rte_eth_dev_close(uint16_t port_id);
+
+/**
+ * Reset a Ethernet device and keep its port id.
+ *
+ * When a port has to be reset passively, the DPDK application can invoke
+ * this function. For example when a PF is reset, all its VFs should also
+ * be reset. Normally a DPDK application can invoke this function when
+ * RTE_ETH_EVENT_INTR_RESET event is detected, but can also use it to start
+ * a port reset in other circumstances.
+ *
+ * When this function is called, it first stops the port and then calls the
+ * PMD specific dev_uninit( ) and dev_init( ) to return the port to initial
+ * state, in which no Tx and Rx queues are setup, as if the port has been
+ * reset and not started. The port keeps the port id it had before the
+ * function call.
+ *
+ * After calling rte_eth_dev_reset( ), the application should use
+ * rte_eth_dev_configure( ), rte_eth_rx_queue_setup( ),
+ * rte_eth_tx_queue_setup( ), and rte_eth_dev_start( )
+ * to reconfigure the device as appropriate.
+ *
+ * Note: To avoid unexpected behavior, the application should stop calling
+ * Tx and Rx functions before calling rte_eth_dev_reset( ). For thread
+ * safety, all these controlling functions should be called from the same
+ * thread.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ *
+ * @return
+ * - (0) if successful.
+ * - (-EINVAL) if port identifier is invalid.
+ * - (-ENOTSUP) if hardware doesn't support this function.
+ * - (-EPERM) if not ran from the primary process.
+ * - (-EIO) if re-initialisation failed or device is removed.
+ * - (-ENOMEM) if the reset failed due to OOM.
+ * - (-EAGAIN) if the reset temporarily failed and should be retried later.
+ */
+int rte_eth_dev_reset(uint16_t port_id);
+
+/**
+ * Enable receipt in promiscuous mode for an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ */
+void rte_eth_promiscuous_enable(uint16_t port_id);
+
+/**
+ * Disable receipt in promiscuous mode for an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ */
+void rte_eth_promiscuous_disable(uint16_t port_id);
+
+/**
+ * Return the value of promiscuous mode for an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @return
+ * - (1) if promiscuous is enabled
+ * - (0) if promiscuous is disabled.
+ * - (-1) on error
+ */
+int rte_eth_promiscuous_get(uint16_t port_id);
+
+/**
+ * Enable the receipt of any multicast frame by an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ */
+void rte_eth_allmulticast_enable(uint16_t port_id);
+
+/**
+ * Disable the receipt of all multicast frames by an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ */
+void rte_eth_allmulticast_disable(uint16_t port_id);
+
+/**
+ * Return the value of allmulticast mode for an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @return
+ * - (1) if allmulticast is enabled
+ * - (0) if allmulticast is disabled.
+ * - (-1) on error
+ */
+int rte_eth_allmulticast_get(uint16_t port_id);
+
+/**
+ * Retrieve the status (ON/OFF), the speed (in Mbps) and the mode (HALF-DUPLEX
+ * or FULL-DUPLEX) of the physical link of an Ethernet device. It might need
+ * to wait up to 9 seconds in it.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param link
+ * A pointer to an *rte_eth_link* structure to be filled with
+ * the status, the speed and the mode of the Ethernet device link.
+ */
+void rte_eth_link_get(uint16_t port_id, struct rte_eth_link *link);
+
+/**
+ * Retrieve the status (ON/OFF), the speed (in Mbps) and the mode (HALF-DUPLEX
+ * or FULL-DUPLEX) of the physical link of an Ethernet device. It is a no-wait
+ * version of rte_eth_link_get().
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param link
+ * A pointer to an *rte_eth_link* structure to be filled with
+ * the status, the speed and the mode of the Ethernet device link.
+ */
+void rte_eth_link_get_nowait(uint16_t port_id, struct rte_eth_link *link);
+
+/**
+ * Retrieve the general I/O statistics of an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param stats
+ * A pointer to a structure of type *rte_eth_stats* to be filled with
+ * the values of device counters for the following set of statistics:
+ * - *ipackets* with the total of successfully received packets.
+ * - *opackets* with the total of successfully transmitted packets.
+ * - *ibytes* with the total of successfully received bytes.
+ * - *obytes* with the total of successfully transmitted bytes.
+ * - *ierrors* with the total of erroneous received packets.
+ * - *oerrors* with the total of failed transmitted packets.
+ * @return
+ * Zero if successful. Non-zero otherwise.
+ */
+int rte_eth_stats_get(uint16_t port_id, struct rte_eth_stats *stats);
+
+/**
+ * Reset the general I/O statistics of an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @return
+ * - (0) if device notified to reset stats.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-ENODEV) if *port_id* invalid.
+ */
+int rte_eth_stats_reset(uint16_t port_id);
+
+/**
+ * Retrieve names of extended statistics of an Ethernet device.
+ *
+ * There is an assumption that 'xstat_names' and 'xstats' arrays are matched
+ * by array index:
+ * xstats_names[i].name => xstats[i].value
+ *
+ * And the array index is same with id field of 'struct rte_eth_xstat':
+ * xstats[i].id == i
+ *
+ * This assumption makes key-value pair matching less flexible but simpler.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param xstats_names
+ * An rte_eth_xstat_name array of at least *size* elements to
+ * be filled. If set to NULL, the function returns the required number
+ * of elements.
+ * @param size
+ * The size of the xstats_names array (number of elements).
+ * @return
+ * - A positive value lower or equal to size: success. The return value
+ * is the number of entries filled in the stats table.
+ * - A positive value higher than size: error, the given statistics table
+ * is too small. The return value corresponds to the size that should
+ * be given to succeed. The entries in the table are not valid and
+ * shall not be used by the caller.
+ * - A negative value on error (invalid port id).
+ */
+int rte_eth_xstats_get_names(uint16_t port_id,
+ struct rte_eth_xstat_name *xstats_names,
+ unsigned int size);
+
+/**
+ * Retrieve extended statistics of an Ethernet device.
+ *
+ * There is an assumption that 'xstat_names' and 'xstats' arrays are matched
+ * by array index:
+ * xstats_names[i].name => xstats[i].value
+ *
+ * And the array index is same with id field of 'struct rte_eth_xstat':
+ * xstats[i].id == i
+ *
+ * This assumption makes key-value pair matching less flexible but simpler.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param xstats
+ * A pointer to a table of structure of type *rte_eth_xstat*
+ * to be filled with device statistics ids and values.
+ * This parameter can be set to NULL if n is 0.
+ * @param n
+ * The size of the xstats array (number of elements).
+ * @return
+ * - A positive value lower or equal to n: success. The return value
+ * is the number of entries filled in the stats table.
+ * - A positive value higher than n: error, the given statistics table
+ * is too small. The return value corresponds to the size that should
+ * be given to succeed. The entries in the table are not valid and
+ * shall not be used by the caller.
+ * - A negative value on error (invalid port id).
+ */
+int rte_eth_xstats_get(uint16_t port_id, struct rte_eth_xstat *xstats,
+ unsigned int n);
+
+/**
+ * Retrieve names of extended statistics of an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param xstats_names
+ * An rte_eth_xstat_name array of at least *size* elements to
+ * be filled. If set to NULL, the function returns the required number
+ * of elements.
+ * @param ids
+ * IDs array given by app to retrieve specific statistics
+ * @param size
+ * The size of the xstats_names array (number of elements).
+ * @return
+ * - A positive value lower or equal to size: success. The return value
+ * is the number of entries filled in the stats table.
+ * - A positive value higher than size: error, the given statistics table
+ * is too small. The return value corresponds to the size that should
+ * be given to succeed. The entries in the table are not valid and
+ * shall not be used by the caller.
+ * - A negative value on error (invalid port id).
+ */
+int
+rte_eth_xstats_get_names_by_id(uint16_t port_id,
+ struct rte_eth_xstat_name *xstats_names, unsigned int size,
+ uint64_t *ids);
+
+/**
+ * Retrieve extended statistics of an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param ids
+ * A pointer to an ids array passed by application. This tells which
+ * statistics values function should retrieve. This parameter
+ * can be set to NULL if size is 0. In this case function will retrieve
+ * all avalible statistics.
+ * @param values
+ * A pointer to a table to be filled with device statistics values.
+ * @param size
+ * The size of the ids array (number of elements).
+ * @return
+ * - A positive value lower or equal to size: success. The return value
+ * is the number of entries filled in the stats table.
+ * - A positive value higher than size: error, the given statistics table
+ * is too small. The return value corresponds to the size that should
+ * be given to succeed. The entries in the table are not valid and
+ * shall not be used by the caller.
+ * - A negative value on error (invalid port id).
+ */
+int rte_eth_xstats_get_by_id(uint16_t port_id, const uint64_t *ids,
+ uint64_t *values, unsigned int size);
+
+/**
+ * Gets the ID of a statistic from its name.
+ *
+ * This function searches for the statistics using string compares, and
+ * as such should not be used on the fast-path. For fast-path retrieval of
+ * specific statistics, store the ID as provided in *id* from this function,
+ * and pass the ID to rte_eth_xstats_get()
+ *
+ * @param port_id The port to look up statistics from
+ * @param xstat_name The name of the statistic to return
+ * @param[out] id A pointer to an app-supplied uint64_t which should be
+ * set to the ID of the stat if the stat exists.
+ * @return
+ * 0 on success
+ * -ENODEV for invalid port_id,
+ * -EIO if device is removed,
+ * -EINVAL if the xstat_name doesn't exist in port_id
+ */
+int rte_eth_xstats_get_id_by_name(uint16_t port_id, const char *xstat_name,
+ uint64_t *id);
+
+/**
+ * Reset extended statistics of an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ */
+void rte_eth_xstats_reset(uint16_t port_id);
+
+/**
+ * Set a mapping for the specified transmit queue to the specified per-queue
+ * statistics counter.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param tx_queue_id
+ * The index of the transmit queue for which a queue stats mapping is required.
+ * The value must be in the range [0, nb_tx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @param stat_idx
+ * The per-queue packet statistics functionality number that the transmit
+ * queue is to be assigned.
+ * The value must be in the range [0, RTE_ETHDEV_QUEUE_STAT_CNTRS - 1].
+ * @return
+ * Zero if successful. Non-zero otherwise.
+ */
+int rte_eth_dev_set_tx_queue_stats_mapping(uint16_t port_id,
+ uint16_t tx_queue_id, uint8_t stat_idx);
+
+/**
+ * Set a mapping for the specified receive queue to the specified per-queue
+ * statistics counter.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param rx_queue_id
+ * The index of the receive queue for which a queue stats mapping is required.
+ * The value must be in the range [0, nb_rx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @param stat_idx
+ * The per-queue packet statistics functionality number that the receive
+ * queue is to be assigned.
+ * The value must be in the range [0, RTE_ETHDEV_QUEUE_STAT_CNTRS - 1].
+ * @return
+ * Zero if successful. Non-zero otherwise.
+ */
+int rte_eth_dev_set_rx_queue_stats_mapping(uint16_t port_id,
+ uint16_t rx_queue_id,
+ uint8_t stat_idx);
+
+/**
+ * Retrieve the Ethernet address of an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param mac_addr
+ * A pointer to a structure of type *ether_addr* to be filled with
+ * the Ethernet address of the Ethernet device.
+ */
+void rte_eth_macaddr_get(uint16_t port_id, struct ether_addr *mac_addr);
+
+/**
+ * Retrieve the contextual information of an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param dev_info
+ * A pointer to a structure of type *rte_eth_dev_info* to be filled with
+ * the contextual information of the Ethernet device.
+ */
+void rte_eth_dev_info_get(uint16_t port_id, struct rte_eth_dev_info *dev_info);
+
+/**
+ * Retrieve the firmware version of a device.
+ *
+ * @param port_id
+ * The port identifier of the device.
+ * @param fw_version
+ * A pointer to a string array storing the firmware version of a device,
+ * the string includes terminating null. This pointer is allocated by caller.
+ * @param fw_size
+ * The size of the string array pointed by fw_version, which should be
+ * large enough to store firmware version of the device.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if operation is not supported.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EIO) if device is removed.
+ * - (>0) if *fw_size* is not enough to store firmware version, return
+ * the size of the non truncated string.
+ */
+int rte_eth_dev_fw_version_get(uint16_t port_id,
+ char *fw_version, size_t fw_size);
+
+/**
+ * Retrieve the supported packet types of an Ethernet device.
+ *
+ * When a packet type is announced as supported, it *must* be recognized by
+ * the PMD. For instance, if RTE_PTYPE_L2_ETHER, RTE_PTYPE_L2_ETHER_VLAN
+ * and RTE_PTYPE_L3_IPV4 are announced, the PMD must return the following
+ * packet types for these packets:
+ * - Ether/IPv4 -> RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV4
+ * - Ether/Vlan/IPv4 -> RTE_PTYPE_L2_ETHER_VLAN | RTE_PTYPE_L3_IPV4
+ * - Ether/[anything else] -> RTE_PTYPE_L2_ETHER
+ * - Ether/Vlan/[anything else] -> RTE_PTYPE_L2_ETHER_VLAN
+ *
+ * When a packet is received by a PMD, the most precise type must be
+ * returned among the ones supported. However a PMD is allowed to set
+ * packet type that is not in the supported list, at the condition that it
+ * is more precise. Therefore, a PMD announcing no supported packet types
+ * can still set a matching packet type in a received packet.
+ *
+ * @note
+ * Better to invoke this API after the device is already started or rx burst
+ * function is decided, to obtain correct supported ptypes.
+ * @note
+ * if a given PMD does not report what ptypes it supports, then the supported
+ * ptype count is reported as 0.
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param ptype_mask
+ * A hint of what kind of packet type which the caller is interested in.
+ * @param ptypes
+ * An array pointer to store adequate packet types, allocated by caller.
+ * @param num
+ * Size of the array pointed by param ptypes.
+ * @return
+ * - (>=0) Number of supported ptypes. If the number of types exceeds num,
+ * only num entries will be filled into the ptypes array, but the full
+ * count of supported ptypes will be returned.
+ * - (-ENODEV) if *port_id* invalid.
+ */
+int rte_eth_dev_get_supported_ptypes(uint16_t port_id, uint32_t ptype_mask,
+ uint32_t *ptypes, int num);
+
+/**
+ * Retrieve the MTU of an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param mtu
+ * A pointer to a uint16_t where the retrieved MTU is to be stored.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port_id* invalid.
+ */
+int rte_eth_dev_get_mtu(uint16_t port_id, uint16_t *mtu);
+
+/**
+ * Change the MTU of an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param mtu
+ * A uint16_t for the MTU to be applied.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if operation is not supported.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EIO) if device is removed.
+ * - (-EINVAL) if *mtu* invalid.
+ * - (-EBUSY) if operation is not allowed when the port is running
+ */
+int rte_eth_dev_set_mtu(uint16_t port_id, uint16_t mtu);
+
+/**
+ * Enable/Disable hardware filtering by an Ethernet device of received
+ * VLAN packets tagged with a given VLAN Tag Identifier.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param vlan_id
+ * The VLAN Tag Identifier whose filtering must be enabled or disabled.
+ * @param on
+ * If > 0, enable VLAN filtering of VLAN packets tagged with *vlan_id*.
+ * Otherwise, disable VLAN filtering of VLAN packets tagged with *vlan_id*.
+ * @return
+ * - (0) if successful.
+ * - (-ENOSUP) if hardware-assisted VLAN filtering not configured.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EIO) if device is removed.
+ * - (-ENOSYS) if VLAN filtering on *port_id* disabled.
+ * - (-EINVAL) if *vlan_id* > 4095.
+ */
+int rte_eth_dev_vlan_filter(uint16_t port_id, uint16_t vlan_id, int on);
+
+/**
+ * Enable/Disable hardware VLAN Strip by a rx queue of an Ethernet device.
+ * 82599/X540/X550 can support VLAN stripping at the rx queue level
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param rx_queue_id
+ * The index of the receive queue for which a queue stats mapping is required.
+ * The value must be in the range [0, nb_rx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @param on
+ * If 1, Enable VLAN Stripping of the receive queue of the Ethernet port.
+ * If 0, Disable VLAN Stripping of the receive queue of the Ethernet port.
+ * @return
+ * - (0) if successful.
+ * - (-ENOSUP) if hardware-assisted VLAN stripping not configured.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EINVAL) if *rx_queue_id* invalid.
+ */
+int rte_eth_dev_set_vlan_strip_on_queue(uint16_t port_id, uint16_t rx_queue_id,
+ int on);
+
+/**
+ * Set the Outer VLAN Ether Type by an Ethernet device, it can be inserted to
+ * the VLAN Header. This is a register setup available on some Intel NIC, not
+ * but all, please check the data sheet for availability.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param vlan_type
+ * The vlan type.
+ * @param tag_type
+ * The Tag Protocol ID
+ * @return
+ * - (0) if successful.
+ * - (-ENOSUP) if hardware-assisted VLAN TPID setup is not supported.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EIO) if device is removed.
+ */
+int rte_eth_dev_set_vlan_ether_type(uint16_t port_id,
+ enum rte_vlan_type vlan_type,
+ uint16_t tag_type);
+
+/**
+ * Set VLAN offload configuration on an Ethernet device
+ * Enable/Disable Extended VLAN by an Ethernet device, This is a register setup
+ * available on some Intel NIC, not but all, please check the data sheet for
+ * availability.
+ * Enable/Disable VLAN Strip can be done on rx queue for certain NIC, but here
+ * the configuration is applied on the port level.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param offload_mask
+ * The VLAN Offload bit mask can be mixed use with "OR"
+ * ETH_VLAN_STRIP_OFFLOAD
+ * ETH_VLAN_FILTER_OFFLOAD
+ * ETH_VLAN_EXTEND_OFFLOAD
+ * @return
+ * - (0) if successful.
+ * - (-ENOSUP) if hardware-assisted VLAN filtering not configured.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EIO) if device is removed.
+ */
+int rte_eth_dev_set_vlan_offload(uint16_t port_id, int offload_mask);
+
+/**
+ * Read VLAN Offload configuration from an Ethernet device
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @return
+ * - (>0) if successful. Bit mask to indicate
+ * ETH_VLAN_STRIP_OFFLOAD
+ * ETH_VLAN_FILTER_OFFLOAD
+ * ETH_VLAN_EXTEND_OFFLOAD
+ * - (-ENODEV) if *port_id* invalid.
+ */
+int rte_eth_dev_get_vlan_offload(uint16_t port_id);
+
+/**
+ * Set port based TX VLAN insertion on or off.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param pvid
+ * Port based TX VLAN identifier together with user priority.
+ * @param on
+ * Turn on or off the port based TX VLAN insertion.
+ *
+ * @return
+ * - (0) if successful.
+ * - negative if failed.
+ */
+int rte_eth_dev_set_vlan_pvid(uint16_t port_id, uint16_t pvid, int on);
+
+typedef void (*buffer_tx_error_fn)(struct rte_mbuf **unsent, uint16_t count,
+ void *userdata);
+
+/**
+ * Structure used to buffer packets for future TX
+ * Used by APIs rte_eth_tx_buffer and rte_eth_tx_buffer_flush
+ */
+struct rte_eth_dev_tx_buffer {
+ buffer_tx_error_fn error_callback;
+ void *error_userdata;
+ uint16_t size; /**< Size of buffer for buffered tx */
+ uint16_t length; /**< Number of packets in the array */
+ struct rte_mbuf *pkts[];
+ /**< Pending packets to be sent on explicit flush or when full */
+};
+
+/**
+ * Calculate the size of the tx buffer.
+ *
+ * @param sz
+ * Number of stored packets.
+ */
+#define RTE_ETH_TX_BUFFER_SIZE(sz) \
+ (sizeof(struct rte_eth_dev_tx_buffer) + (sz) * sizeof(struct rte_mbuf *))
+
+/**
+ * Initialize default values for buffered transmitting
+ *
+ * @param buffer
+ * Tx buffer to be initialized.
+ * @param size
+ * Buffer size
+ * @return
+ * 0 if no error
+ */
+int
+rte_eth_tx_buffer_init(struct rte_eth_dev_tx_buffer *buffer, uint16_t size);
+
+/**
+ * Configure a callback for buffered packets which cannot be sent
+ *
+ * Register a specific callback to be called when an attempt is made to send
+ * all packets buffered on an ethernet port, but not all packets can
+ * successfully be sent. The callback registered here will be called only
+ * from calls to rte_eth_tx_buffer() and rte_eth_tx_buffer_flush() APIs.
+ * The default callback configured for each queue by default just frees the
+ * packets back to the calling mempool. If additional behaviour is required,
+ * for example, to count dropped packets, or to retry transmission of packets
+ * which cannot be sent, this function should be used to register a suitable
+ * callback function to implement the desired behaviour.
+ * The example callback "rte_eth_count_unsent_packet_callback()" is also
+ * provided as reference.
+ *
+ * @param buffer
+ * The port identifier of the Ethernet device.
+ * @param callback
+ * The function to be used as the callback.
+ * @param userdata
+ * Arbitrary parameter to be passed to the callback function
+ * @return
+ * 0 on success, or -1 on error with rte_errno set appropriately
+ */
+int
+rte_eth_tx_buffer_set_err_callback(struct rte_eth_dev_tx_buffer *buffer,
+ buffer_tx_error_fn callback, void *userdata);
+
+/**
+ * Callback function for silently dropping unsent buffered packets.
+ *
+ * This function can be passed to rte_eth_tx_buffer_set_err_callback() to
+ * adjust the default behavior when buffered packets cannot be sent. This
+ * function drops any unsent packets silently and is used by tx buffered
+ * operations as default behavior.
+ *
+ * NOTE: this function should not be called directly, instead it should be used
+ * as a callback for packet buffering.
+ *
+ * NOTE: when configuring this function as a callback with
+ * rte_eth_tx_buffer_set_err_callback(), the final, userdata parameter
+ * should point to an uint64_t value.
+ *
+ * @param pkts
+ * The previously buffered packets which could not be sent
+ * @param unsent
+ * The number of unsent packets in the pkts array
+ * @param userdata
+ * Not used
+ */
+void
+rte_eth_tx_buffer_drop_callback(struct rte_mbuf **pkts, uint16_t unsent,
+ void *userdata);
+
+/**
+ * Callback function for tracking unsent buffered packets.
+ *
+ * This function can be passed to rte_eth_tx_buffer_set_err_callback() to
+ * adjust the default behavior when buffered packets cannot be sent. This
+ * function drops any unsent packets, but also updates a user-supplied counter
+ * to track the overall number of packets dropped. The counter should be an
+ * uint64_t variable.
+ *
+ * NOTE: this function should not be called directly, instead it should be used
+ * as a callback for packet buffering.
+ *
+ * NOTE: when configuring this function as a callback with
+ * rte_eth_tx_buffer_set_err_callback(), the final, userdata parameter
+ * should point to an uint64_t value.
+ *
+ * @param pkts
+ * The previously buffered packets which could not be sent
+ * @param unsent
+ * The number of unsent packets in the pkts array
+ * @param userdata
+ * Pointer to an uint64_t value, which will be incremented by unsent
+ */
+void
+rte_eth_tx_buffer_count_callback(struct rte_mbuf **pkts, uint16_t unsent,
+ void *userdata);
+
+/**
+ * Request the driver to free mbufs currently cached by the driver. The
+ * driver will only free the mbuf if it is no longer in use. It is the
+ * application's responsibity to ensure rte_eth_tx_buffer_flush(..) is
+ * called if needed.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The index of the transmit queue through which output packets must be
+ * sent.
+ * The value must be in the range [0, nb_tx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @param free_cnt
+ * Maximum number of packets to free. Use 0 to indicate all possible packets
+ * should be freed. Note that a packet may be using multiple mbufs.
+ * @return
+ * Failure: < 0
+ * -ENODEV: Invalid interface
+ * -EIO: device is removed
+ * -ENOTSUP: Driver does not support function
+ * Success: >= 0
+ * 0-n: Number of packets freed. More packets may still remain in ring that
+ * are in use.
+ */
+int
+rte_eth_tx_done_cleanup(uint16_t port_id, uint16_t queue_id, uint32_t free_cnt);
+
+/**
+ * Subtypes for IPsec offload event(@ref RTE_ETH_EVENT_IPSEC) raised by
+ * eth device.
+ */
+enum rte_eth_event_ipsec_subtype {
+ RTE_ETH_EVENT_IPSEC_UNKNOWN = 0,
+ /**< Unknown event type */
+ RTE_ETH_EVENT_IPSEC_ESN_OVERFLOW,
+ /**< Sequence number overflow */
+ RTE_ETH_EVENT_IPSEC_SA_TIME_EXPIRY,
+ /**< Soft time expiry of SA */
+ RTE_ETH_EVENT_IPSEC_SA_BYTE_EXPIRY,
+ /**< Soft byte expiry of SA */
+ RTE_ETH_EVENT_IPSEC_MAX
+ /**< Max value of this enum */
+};
+
+/**
+ * Descriptor for @ref RTE_ETH_EVENT_IPSEC event. Used by eth dev to send extra
+ * information of the IPsec offload event.
+ */
+struct rte_eth_event_ipsec_desc {
+ enum rte_eth_event_ipsec_subtype subtype;
+ /**< Type of RTE_ETH_EVENT_IPSEC_* event */
+ uint64_t metadata;
+ /**< Event specific metadata
+ *
+ * For the following events, *userdata* registered
+ * with the *rte_security_session* would be returned
+ * as metadata,
+ *
+ * - @ref RTE_ETH_EVENT_IPSEC_ESN_OVERFLOW
+ * - @ref RTE_ETH_EVENT_IPSEC_SA_TIME_EXPIRY
+ * - @ref RTE_ETH_EVENT_IPSEC_SA_BYTE_EXPIRY
+ *
+ * @see struct rte_security_session_conf
+ *
+ */
+};
+
+/**
+ * The eth device event type for interrupt, and maybe others in the future.
+ */
+enum rte_eth_event_type {
+ RTE_ETH_EVENT_UNKNOWN, /**< unknown event type */
+ RTE_ETH_EVENT_INTR_LSC, /**< lsc interrupt event */
+ RTE_ETH_EVENT_QUEUE_STATE,
+ /**< queue state event (enabled/disabled) */
+ RTE_ETH_EVENT_INTR_RESET,
+ /**< reset interrupt event, sent to VF on PF reset */
+ RTE_ETH_EVENT_VF_MBOX, /**< message from the VF received by PF */
+ RTE_ETH_EVENT_MACSEC, /**< MACsec offload related event */
+ RTE_ETH_EVENT_INTR_RMV, /**< device removal event */
+ RTE_ETH_EVENT_NEW, /**< port is probed */
+ RTE_ETH_EVENT_DESTROY, /**< port is released */
+ RTE_ETH_EVENT_IPSEC, /**< IPsec offload related event */
+ RTE_ETH_EVENT_MAX /**< max value of this enum */
+};
+
+typedef int (*rte_eth_dev_cb_fn)(uint16_t port_id,
+ enum rte_eth_event_type event, void *cb_arg, void *ret_param);
+/**< user application callback to be registered for interrupts */
+
+/**
+ * Register a callback function for port event.
+ *
+ * @param port_id
+ * Port id.
+ * RTE_ETH_ALL means register the event for all port ids.
+ * @param event
+ * Event interested.
+ * @param cb_fn
+ * User supplied callback function to be called.
+ * @param cb_arg
+ * Pointer to the parameters for the registered callback.
+ *
+ * @return
+ * - On success, zero.
+ * - On failure, a negative value.
+ */
+int rte_eth_dev_callback_register(uint16_t port_id,
+ enum rte_eth_event_type event,
+ rte_eth_dev_cb_fn cb_fn, void *cb_arg);
+
+/**
+ * Unregister a callback function for port event.
+ *
+ * @param port_id
+ * Port id.
+ * RTE_ETH_ALL means unregister the event for all port ids.
+ * @param event
+ * Event interested.
+ * @param cb_fn
+ * User supplied callback function to be called.
+ * @param cb_arg
+ * Pointer to the parameters for the registered callback. -1 means to
+ * remove all for the same callback address and same event.
+ *
+ * @return
+ * - On success, zero.
+ * - On failure, a negative value.
+ */
+int rte_eth_dev_callback_unregister(uint16_t port_id,
+ enum rte_eth_event_type event,
+ rte_eth_dev_cb_fn cb_fn, void *cb_arg);
+
+/**
+ * When there is no rx packet coming in Rx Queue for a long time, we can
+ * sleep lcore related to RX Queue for power saving, and enable rx interrupt
+ * to be triggered when Rx packet arrives.
+ *
+ * The rte_eth_dev_rx_intr_enable() function enables rx queue
+ * interrupt on specific rx queue of a port.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The index of the receive queue from which to retrieve input packets.
+ * The value must be in the range [0, nb_rx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if underlying hardware OR driver doesn't support
+ * that operation.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EIO) if device is removed.
+ */
+int rte_eth_dev_rx_intr_enable(uint16_t port_id, uint16_t queue_id);
+
+/**
+ * When lcore wakes up from rx interrupt indicating packet coming, disable rx
+ * interrupt and returns to polling mode.
+ *
+ * The rte_eth_dev_rx_intr_disable() function disables rx queue
+ * interrupt on specific rx queue of a port.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The index of the receive queue from which to retrieve input packets.
+ * The value must be in the range [0, nb_rx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if underlying hardware OR driver doesn't support
+ * that operation.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EIO) if device is removed.
+ */
+int rte_eth_dev_rx_intr_disable(uint16_t port_id, uint16_t queue_id);
+
+/**
+ * RX Interrupt control per port.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param epfd
+ * Epoll instance fd which the intr vector associated to.
+ * Using RTE_EPOLL_PER_THREAD allows to use per thread epoll instance.
+ * @param op
+ * The operation be performed for the vector.
+ * Operation type of {RTE_INTR_EVENT_ADD, RTE_INTR_EVENT_DEL}.
+ * @param data
+ * User raw data.
+ * @return
+ * - On success, zero.
+ * - On failure, a negative value.
+ */
+int rte_eth_dev_rx_intr_ctl(uint16_t port_id, int epfd, int op, void *data);
+
+/**
+ * RX Interrupt control per queue.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The index of the receive queue from which to retrieve input packets.
+ * The value must be in the range [0, nb_rx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @param epfd
+ * Epoll instance fd which the intr vector associated to.
+ * Using RTE_EPOLL_PER_THREAD allows to use per thread epoll instance.
+ * @param op
+ * The operation be performed for the vector.
+ * Operation type of {RTE_INTR_EVENT_ADD, RTE_INTR_EVENT_DEL}.
+ * @param data
+ * User raw data.
+ * @return
+ * - On success, zero.
+ * - On failure, a negative value.
+ */
+int rte_eth_dev_rx_intr_ctl_q(uint16_t port_id, uint16_t queue_id,
+ int epfd, int op, void *data);
+
+/**
+ * Turn on the LED on the Ethernet device.
+ * This function turns on the LED on the Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if underlying hardware OR driver doesn't support
+ * that operation.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EIO) if device is removed.
+ */
+int rte_eth_led_on(uint16_t port_id);
+
+/**
+ * Turn off the LED on the Ethernet device.
+ * This function turns off the LED on the Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if underlying hardware OR driver doesn't support
+ * that operation.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EIO) if device is removed.
+ */
+int rte_eth_led_off(uint16_t port_id);
+
+/**
+ * Get current status of the Ethernet link flow control for Ethernet device
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param fc_conf
+ * The pointer to the structure where to store the flow control parameters.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support flow control.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EIO) if device is removed.
+ */
+int rte_eth_dev_flow_ctrl_get(uint16_t port_id,
+ struct rte_eth_fc_conf *fc_conf);
+
+/**
+ * Configure the Ethernet link flow control for Ethernet device
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param fc_conf
+ * The pointer to the structure of the flow control parameters.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support flow control mode.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EINVAL) if bad parameter
+ * - (-EIO) if flow control setup failure or device is removed.
+ */
+int rte_eth_dev_flow_ctrl_set(uint16_t port_id,
+ struct rte_eth_fc_conf *fc_conf);
+
+/**
+ * Configure the Ethernet priority flow control under DCB environment
+ * for Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param pfc_conf
+ * The pointer to the structure of the priority flow control parameters.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support priority flow control mode.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EINVAL) if bad parameter
+ * - (-EIO) if flow control setup failure or device is removed.
+ */
+int rte_eth_dev_priority_flow_ctrl_set(uint16_t port_id,
+ struct rte_eth_pfc_conf *pfc_conf);
+
+/**
+ * Add a MAC address to an internal array of addresses used to enable whitelist
+ * filtering to accept packets only if the destination MAC address matches.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param mac_addr
+ * The MAC address to add.
+ * @param pool
+ * VMDq pool index to associate address with (if VMDq is enabled). If VMDq is
+ * not enabled, this should be set to 0.
+ * @return
+ * - (0) if successfully added or *mac_addr* was already added.
+ * - (-ENOTSUP) if hardware doesn't support this feature.
+ * - (-ENODEV) if *port* is invalid.
+ * - (-EIO) if device is removed.
+ * - (-ENOSPC) if no more MAC addresses can be added.
+ * - (-EINVAL) if MAC address is invalid.
+ */
+int rte_eth_dev_mac_addr_add(uint16_t port_id, struct ether_addr *mac_addr,
+ uint32_t pool);
+
+/**
+ * Remove a MAC address from the internal array of addresses.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param mac_addr
+ * MAC address to remove.
+ * @return
+ * - (0) if successful, or *mac_addr* didn't exist.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EADDRINUSE) if attempting to remove the default MAC address
+ */
+int rte_eth_dev_mac_addr_remove(uint16_t port_id, struct ether_addr *mac_addr);
+
+/**
+ * Set the default MAC address.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param mac_addr
+ * New default MAC address.
+ * @return
+ * - (0) if successful, or *mac_addr* didn't exist.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if MAC address is invalid.
+ */
+int rte_eth_dev_default_mac_addr_set(uint16_t port_id,
+ struct ether_addr *mac_addr);
+
+/**
+ * Update Redirection Table(RETA) of Receive Side Scaling of Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param reta_conf
+ * RETA to update.
+ * @param reta_size
+ * Redirection table size. The table size can be queried by
+ * rte_eth_dev_info_get().
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ * - (-EIO) if device is removed.
+ */
+int rte_eth_dev_rss_reta_update(uint16_t port_id,
+ struct rte_eth_rss_reta_entry64 *reta_conf,
+ uint16_t reta_size);
+
+ /**
+ * Query Redirection Table(RETA) of Receive Side Scaling of Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param reta_conf
+ * RETA to query.
+ * @param reta_size
+ * Redirection table size. The table size can be queried by
+ * rte_eth_dev_info_get().
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ * - (-EIO) if device is removed.
+ */
+int rte_eth_dev_rss_reta_query(uint16_t port_id,
+ struct rte_eth_rss_reta_entry64 *reta_conf,
+ uint16_t reta_size);
+
+ /**
+ * Updates unicast hash table for receiving packet with the given destination
+ * MAC address, and the packet is routed to all VFs for which the RX mode is
+ * accept packets that match the unicast hash table.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param addr
+ * Unicast MAC address.
+ * @param on
+ * 1 - Set an unicast hash bit for receiving packets with the MAC address.
+ * 0 - Clear an unicast hash bit.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EIO) if device is removed.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_eth_dev_uc_hash_table_set(uint16_t port_id, struct ether_addr *addr,
+ uint8_t on);
+
+ /**
+ * Updates all unicast hash bitmaps for receiving packet with any Unicast
+ * Ethernet MAC addresses,the packet is routed to all VFs for which the RX
+ * mode is accept packets that match the unicast hash table.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param on
+ * 1 - Set all unicast hash bitmaps for receiving all the Ethernet
+ * MAC addresses
+ * 0 - Clear all unicast hash bitmaps
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EIO) if device is removed.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_eth_dev_uc_all_hash_table_set(uint16_t port_id, uint8_t on);
+
+/**
+ * Set a traffic mirroring rule on an Ethernet device
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param mirror_conf
+ * The pointer to the traffic mirroring structure describing the mirroring rule.
+ * The *rte_eth_vm_mirror_conf* structure includes the type of mirroring rule,
+ * destination pool and the value of rule if enable vlan or pool mirroring.
+ *
+ * @param rule_id
+ * The index of traffic mirroring rule, we support four separated rules.
+ * @param on
+ * 1 - Enable a mirroring rule.
+ * 0 - Disable a mirroring rule.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support this feature.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EIO) if device is removed.
+ * - (-EINVAL) if the mr_conf information is not correct.
+ */
+int rte_eth_mirror_rule_set(uint16_t port_id,
+ struct rte_eth_mirror_conf *mirror_conf,
+ uint8_t rule_id,
+ uint8_t on);
+
+/**
+ * Reset a traffic mirroring rule on an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param rule_id
+ * The index of traffic mirroring rule, we support four separated rules.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support this feature.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EIO) if device is removed.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_eth_mirror_rule_reset(uint16_t port_id,
+ uint8_t rule_id);
+
+/**
+ * Set the rate limitation for a queue on an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_idx
+ * The queue id.
+ * @param tx_rate
+ * The tx rate in Mbps. Allocated from the total port link speed.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support this feature.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EIO) if device is removed.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_eth_set_queue_rate_limit(uint16_t port_id, uint16_t queue_idx,
+ uint16_t tx_rate);
+
+ /**
+ * Configuration of Receive Side Scaling hash computation of Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param rss_conf
+ * The new configuration to use for RSS hash computation on the port.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if port identifier is invalid.
+ * - (-EIO) if device is removed.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_eth_dev_rss_hash_update(uint16_t port_id,
+ struct rte_eth_rss_conf *rss_conf);
+
+ /**
+ * Retrieve current configuration of Receive Side Scaling hash computation
+ * of Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param rss_conf
+ * Where to store the current RSS hash configuration of the Ethernet device.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if port identifier is invalid.
+ * - (-EIO) if device is removed.
+ * - (-ENOTSUP) if hardware doesn't support RSS.
+ */
+int
+rte_eth_dev_rss_hash_conf_get(uint16_t port_id,
+ struct rte_eth_rss_conf *rss_conf);
+
+ /**
+ * Add UDP tunneling port for a specific type of tunnel.
+ * The packets with this UDP port will be identified as this type of tunnel.
+ * Before enabling any offloading function for a tunnel, users can call this API
+ * to change or add more UDP port for the tunnel. So the offloading function
+ * can take effect on the packets with the specific UDP port.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param tunnel_udp
+ * UDP tunneling configuration.
+ *
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if port identifier is invalid.
+ * - (-EIO) if device is removed.
+ * - (-ENOTSUP) if hardware doesn't support tunnel type.
+ */
+int
+rte_eth_dev_udp_tunnel_port_add(uint16_t port_id,
+ struct rte_eth_udp_tunnel *tunnel_udp);
+
+ /**
+ * Delete UDP tunneling port a specific type of tunnel.
+ * The packets with this UDP port will not be identified as this type of tunnel
+ * any more.
+ * Before enabling any offloading function for a tunnel, users can call this API
+ * to delete a UDP port for the tunnel. So the offloading function will not take
+ * effect on the packets with the specific UDP port.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param tunnel_udp
+ * UDP tunneling configuration.
+ *
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if port identifier is invalid.
+ * - (-EIO) if device is removed.
+ * - (-ENOTSUP) if hardware doesn't support tunnel type.
+ */
+int
+rte_eth_dev_udp_tunnel_port_delete(uint16_t port_id,
+ struct rte_eth_udp_tunnel *tunnel_udp);
+
+/**
+ * Check whether the filter type is supported on an Ethernet device.
+ * All the supported filter types are defined in 'rte_eth_ctrl.h'.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param filter_type
+ * Filter type.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support this filter type.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EIO) if device is removed.
+ */
+int rte_eth_dev_filter_supported(uint16_t port_id,
+ enum rte_filter_type filter_type);
+
+/**
+ * Take operations to assigned filter type on an Ethernet device.
+ * All the supported operations and filter types are defined in 'rte_eth_ctrl.h'.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param filter_type
+ * Filter type.
+ * @param filter_op
+ * Type of operation.
+ * @param arg
+ * A pointer to arguments defined specifically for the operation.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EIO) if device is removed.
+ * - others depends on the specific operations implementation.
+ */
+int rte_eth_dev_filter_ctrl(uint16_t port_id, enum rte_filter_type filter_type,
+ enum rte_filter_op filter_op, void *arg);
+
+/**
+ * Get DCB information on an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param dcb_info
+ * dcb information.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if port identifier is invalid.
+ * - (-EIO) if device is removed.
+ * - (-ENOTSUP) if hardware doesn't support.
+ */
+int rte_eth_dev_get_dcb_info(uint16_t port_id,
+ struct rte_eth_dcb_info *dcb_info);
+
+struct rte_eth_rxtx_callback;
+
+/**
+ * Add a callback to be called on packet RX on a given port and queue.
+ *
+ * This API configures a function to be called for each burst of
+ * packets received on a given NIC port queue. The return value is a pointer
+ * that can be used to later remove the callback using
+ * rte_eth_remove_rx_callback().
+ *
+ * Multiple functions are called in the order that they are added.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The queue on the Ethernet device on which the callback is to be added.
+ * @param fn
+ * The callback function
+ * @param user_param
+ * A generic pointer parameter which will be passed to each invocation of the
+ * callback function on this port and queue.
+ *
+ * @return
+ * NULL on error.
+ * On success, a pointer value which can later be used to remove the callback.
+ */
+const struct rte_eth_rxtx_callback *
+rte_eth_add_rx_callback(uint16_t port_id, uint16_t queue_id,
+ rte_rx_callback_fn fn, void *user_param);
+
+/**
+ * Add a callback that must be called first on packet RX on a given port
+ * and queue.
+ *
+ * This API configures a first function to be called for each burst of
+ * packets received on a given NIC port queue. The return value is a pointer
+ * that can be used to later remove the callback using
+ * rte_eth_remove_rx_callback().
+ *
+ * Multiple functions are called in the order that they are added.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The queue on the Ethernet device on which the callback is to be added.
+ * @param fn
+ * The callback function
+ * @param user_param
+ * A generic pointer parameter which will be passed to each invocation of the
+ * callback function on this port and queue.
+ *
+ * @return
+ * NULL on error.
+ * On success, a pointer value which can later be used to remove the callback.
+ */
+const struct rte_eth_rxtx_callback *
+rte_eth_add_first_rx_callback(uint16_t port_id, uint16_t queue_id,
+ rte_rx_callback_fn fn, void *user_param);
+
+/**
+ * Add a callback to be called on packet TX on a given port and queue.
+ *
+ * This API configures a function to be called for each burst of
+ * packets sent on a given NIC port queue. The return value is a pointer
+ * that can be used to later remove the callback using
+ * rte_eth_remove_tx_callback().
+ *
+ * Multiple functions are called in the order that they are added.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The queue on the Ethernet device on which the callback is to be added.
+ * @param fn
+ * The callback function
+ * @param user_param
+ * A generic pointer parameter which will be passed to each invocation of the
+ * callback function on this port and queue.
+ *
+ * @return
+ * NULL on error.
+ * On success, a pointer value which can later be used to remove the callback.
+ */
+const struct rte_eth_rxtx_callback *
+rte_eth_add_tx_callback(uint16_t port_id, uint16_t queue_id,
+ rte_tx_callback_fn fn, void *user_param);
+
+/**
+ * Remove an RX packet callback from a given port and queue.
+ *
+ * This function is used to removed callbacks that were added to a NIC port
+ * queue using rte_eth_add_rx_callback().
+ *
+ * Note: the callback is removed from the callback list but it isn't freed
+ * since the it may still be in use. The memory for the callback can be
+ * subsequently freed back by the application by calling rte_free():
+ *
+ * - Immediately - if the port is stopped, or the user knows that no
+ * callbacks are in flight e.g. if called from the thread doing RX/TX
+ * on that queue.
+ *
+ * - After a short delay - where the delay is sufficient to allow any
+ * in-flight callbacks to complete.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The queue on the Ethernet device from which the callback is to be removed.
+ * @param user_cb
+ * User supplied callback created via rte_eth_add_rx_callback().
+ *
+ * @return
+ * - 0: Success. Callback was removed.
+ * - -ENOTSUP: Callback support is not available.
+ * - -EINVAL: The port_id or the queue_id is out of range, or the callback
+ * is NULL or not found for the port/queue.
+ */
+int rte_eth_remove_rx_callback(uint16_t port_id, uint16_t queue_id,
+ const struct rte_eth_rxtx_callback *user_cb);
+
+/**
+ * Remove a TX packet callback from a given port and queue.
+ *
+ * This function is used to removed callbacks that were added to a NIC port
+ * queue using rte_eth_add_tx_callback().
+ *
+ * Note: the callback is removed from the callback list but it isn't freed
+ * since the it may still be in use. The memory for the callback can be
+ * subsequently freed back by the application by calling rte_free():
+ *
+ * - Immediately - if the port is stopped, or the user knows that no
+ * callbacks are in flight e.g. if called from the thread doing RX/TX
+ * on that queue.
+ *
+ * - After a short delay - where the delay is sufficient to allow any
+ * in-flight callbacks to complete.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The queue on the Ethernet device from which the callback is to be removed.
+ * @param user_cb
+ * User supplied callback created via rte_eth_add_tx_callback().
+ *
+ * @return
+ * - 0: Success. Callback was removed.
+ * - -ENOTSUP: Callback support is not available.
+ * - -EINVAL: The port_id or the queue_id is out of range, or the callback
+ * is NULL or not found for the port/queue.
+ */
+int rte_eth_remove_tx_callback(uint16_t port_id, uint16_t queue_id,
+ const struct rte_eth_rxtx_callback *user_cb);
+
+/**
+ * Retrieve information about given port's RX queue.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The RX queue on the Ethernet device for which information
+ * will be retrieved.
+ * @param qinfo
+ * A pointer to a structure of type *rte_eth_rxq_info_info* to be filled with
+ * the information of the Ethernet device.
+ *
+ * @return
+ * - 0: Success
+ * - -ENOTSUP: routine is not supported by the device PMD.
+ * - -EINVAL: The port_id or the queue_id is out of range.
+ */
+int rte_eth_rx_queue_info_get(uint16_t port_id, uint16_t queue_id,
+ struct rte_eth_rxq_info *qinfo);
+
+/**
+ * Retrieve information about given port's TX queue.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The TX queue on the Ethernet device for which information
+ * will be retrieved.
+ * @param qinfo
+ * A pointer to a structure of type *rte_eth_txq_info_info* to be filled with
+ * the information of the Ethernet device.
+ *
+ * @return
+ * - 0: Success
+ * - -ENOTSUP: routine is not supported by the device PMD.
+ * - -EINVAL: The port_id or the queue_id is out of range.
+ */
+int rte_eth_tx_queue_info_get(uint16_t port_id, uint16_t queue_id,
+ struct rte_eth_txq_info *qinfo);
+
+/**
+ * Retrieve device registers and register attributes (number of registers and
+ * register size)
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param info
+ * Pointer to rte_dev_reg_info structure to fill in. If info->data is
+ * NULL the function fills in the width and length fields. If non-NULL
+ * the registers are put into the buffer pointed at by the data field.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EIO) if device is removed.
+ * - others depends on the specific operations implementation.
+ */
+int rte_eth_dev_get_reg_info(uint16_t port_id, struct rte_dev_reg_info *info);
+
+/**
+ * Retrieve size of device EEPROM
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @return
+ * - (>=0) EEPROM size if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EIO) if device is removed.
+ * - others depends on the specific operations implementation.
+ */
+int rte_eth_dev_get_eeprom_length(uint16_t port_id);
+
+/**
+ * Retrieve EEPROM and EEPROM attribute
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param info
+ * The template includes buffer for return EEPROM data and
+ * EEPROM attributes to be filled.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EIO) if device is removed.
+ * - others depends on the specific operations implementation.
+ */
+int rte_eth_dev_get_eeprom(uint16_t port_id, struct rte_dev_eeprom_info *info);
+
+/**
+ * Program EEPROM with provided data
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param info
+ * The template includes EEPROM data for programming and
+ * EEPROM attributes to be filled
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EIO) if device is removed.
+ * - others depends on the specific operations implementation.
+ */
+int rte_eth_dev_set_eeprom(uint16_t port_id, struct rte_dev_eeprom_info *info);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Retrieve the type and size of plugin module EEPROM
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param modinfo
+ * The type and size of plugin module EEPROM.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EIO) if device is removed.
+ * - others depends on the specific operations implementation.
+ */
+int __rte_experimental
+rte_eth_dev_get_module_info(uint16_t port_id,
+ struct rte_eth_dev_module_info *modinfo);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Retrieve the data of plugin module EEPROM
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param info
+ * The template includes the plugin module EEPROM attributes, and the
+ * buffer for return plugin module EEPROM data.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EIO) if device is removed.
+ * - others depends on the specific operations implementation.
+ */
+int __rte_experimental
+rte_eth_dev_get_module_eeprom(uint16_t port_id,
+ struct rte_dev_eeprom_info *info);
+
+/**
+ * Set the list of multicast addresses to filter on an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param mc_addr_set
+ * The array of multicast addresses to set. Equal to NULL when the function
+ * is invoked to flush the set of filtered addresses.
+ * @param nb_mc_addr
+ * The number of multicast addresses in the *mc_addr_set* array. Equal to 0
+ * when the function is invoked to flush the set of filtered addresses.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EIO) if device is removed.
+ * - (-ENOTSUP) if PMD of *port_id* doesn't support multicast filtering.
+ * - (-ENOSPC) if *port_id* has not enough multicast filtering resources.
+ */
+int rte_eth_dev_set_mc_addr_list(uint16_t port_id,
+ struct ether_addr *mc_addr_set,
+ uint32_t nb_mc_addr);
+
+/**
+ * Enable IEEE1588/802.1AS timestamping for an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ *
+ * @return
+ * - 0: Success.
+ * - -ENODEV: The port ID is invalid.
+ * - -EIO: if device is removed.
+ * - -ENOTSUP: The function is not supported by the Ethernet driver.
+ */
+int rte_eth_timesync_enable(uint16_t port_id);
+
+/**
+ * Disable IEEE1588/802.1AS timestamping for an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ *
+ * @return
+ * - 0: Success.
+ * - -ENODEV: The port ID is invalid.
+ * - -EIO: if device is removed.
+ * - -ENOTSUP: The function is not supported by the Ethernet driver.
+ */
+int rte_eth_timesync_disable(uint16_t port_id);
+
+/**
+ * Read an IEEE1588/802.1AS RX timestamp from an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param timestamp
+ * Pointer to the timestamp struct.
+ * @param flags
+ * Device specific flags. Used to pass the RX timesync register index to
+ * i40e. Unused in igb/ixgbe, pass 0 instead.
+ *
+ * @return
+ * - 0: Success.
+ * - -EINVAL: No timestamp is available.
+ * - -ENODEV: The port ID is invalid.
+ * - -EIO: if device is removed.
+ * - -ENOTSUP: The function is not supported by the Ethernet driver.
+ */
+int rte_eth_timesync_read_rx_timestamp(uint16_t port_id,
+ struct timespec *timestamp, uint32_t flags);
+
+/**
+ * Read an IEEE1588/802.1AS TX timestamp from an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param timestamp
+ * Pointer to the timestamp struct.
+ *
+ * @return
+ * - 0: Success.
+ * - -EINVAL: No timestamp is available.
+ * - -ENODEV: The port ID is invalid.
+ * - -EIO: if device is removed.
+ * - -ENOTSUP: The function is not supported by the Ethernet driver.
+ */
+int rte_eth_timesync_read_tx_timestamp(uint16_t port_id,
+ struct timespec *timestamp);
+
+/**
+ * Adjust the timesync clock on an Ethernet device.
+ *
+ * This is usually used in conjunction with other Ethdev timesync functions to
+ * synchronize the device time using the IEEE1588/802.1AS protocol.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param delta
+ * The adjustment in nanoseconds.
+ *
+ * @return
+ * - 0: Success.
+ * - -ENODEV: The port ID is invalid.
+ * - -EIO: if device is removed.
+ * - -ENOTSUP: The function is not supported by the Ethernet driver.
+ */
+int rte_eth_timesync_adjust_time(uint16_t port_id, int64_t delta);
+
+/**
+ * Read the time from the timesync clock on an Ethernet device.
+ *
+ * This is usually used in conjunction with other Ethdev timesync functions to
+ * synchronize the device time using the IEEE1588/802.1AS protocol.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param time
+ * Pointer to the timespec struct that holds the time.
+ *
+ * @return
+ * - 0: Success.
+ */
+int rte_eth_timesync_read_time(uint16_t port_id, struct timespec *time);
+
+/**
+ * Set the time of the timesync clock on an Ethernet device.
+ *
+ * This is usually used in conjunction with other Ethdev timesync functions to
+ * synchronize the device time using the IEEE1588/802.1AS protocol.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param time
+ * Pointer to the timespec struct that holds the time.
+ *
+ * @return
+ * - 0: Success.
+ * - -EINVAL: No timestamp is available.
+ * - -ENODEV: The port ID is invalid.
+ * - -EIO: if device is removed.
+ * - -ENOTSUP: The function is not supported by the Ethernet driver.
+ */
+int rte_eth_timesync_write_time(uint16_t port_id, const struct timespec *time);
+
+/**
+ * Config l2 tunnel ether type of an Ethernet device for filtering specific
+ * tunnel packets by ether type.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param l2_tunnel
+ * l2 tunnel configuration.
+ *
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if port identifier is invalid.
+ * - (-EIO) if device is removed.
+ * - (-ENOTSUP) if hardware doesn't support tunnel type.
+ */
+int
+rte_eth_dev_l2_tunnel_eth_type_conf(uint16_t port_id,
+ struct rte_eth_l2_tunnel_conf *l2_tunnel);
+
+/**
+ * Enable/disable l2 tunnel offload functions. Include,
+ * 1, The ability of parsing a type of l2 tunnel of an Ethernet device.
+ * Filtering, forwarding and offloading this type of tunnel packets depend on
+ * this ability.
+ * 2, Stripping the l2 tunnel tag.
+ * 3, Insertion of the l2 tunnel tag.
+ * 4, Forwarding the packets based on the l2 tunnel tag.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param l2_tunnel
+ * l2 tunnel parameters.
+ * @param mask
+ * Indicate the offload function.
+ * @param en
+ * Enable or disable this function.
+ *
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if port identifier is invalid.
+ * - (-EIO) if device is removed.
+ * - (-ENOTSUP) if hardware doesn't support tunnel type.
+ */
+int
+rte_eth_dev_l2_tunnel_offload_set(uint16_t port_id,
+ struct rte_eth_l2_tunnel_conf *l2_tunnel,
+ uint32_t mask,
+ uint8_t en);
+
+/**
+* Get the port id from device name. The device name should be specified
+* as below:
+* - PCIe address (Domain:Bus:Device.Function), for example- 0000:2:00.0
+* - SoC device name, for example- fsl-gmac0
+* - vdev dpdk name, for example- net_[pcap0|null0|tap0]
+*
+* @param name
+* pci address or name of the device
+* @param port_id
+* pointer to port identifier of the device
+* @return
+* - (0) if successful and port_id is filled.
+* - (-ENODEV or -EINVAL) on failure.
+*/
+int
+rte_eth_dev_get_port_by_name(const char *name, uint16_t *port_id);
+
+/**
+* Get the device name from port id. The device name is specified as below:
+* - PCIe address (Domain:Bus:Device.Function), for example- 0000:02:00.0
+* - SoC device name, for example- fsl-gmac0
+* - vdev dpdk name, for example- net_[pcap0|null0|tun0|tap0]
+*
+* @param port_id
+* Port identifier of the device.
+* @param name
+* Buffer of size RTE_ETH_NAME_MAX_LEN to store the name.
+* @return
+* - (0) if successful.
+* - (-EINVAL) on failure.
+*/
+int
+rte_eth_dev_get_name_by_port(uint16_t port_id, char *name);
+
+/**
+ * Check that numbers of Rx and Tx descriptors satisfy descriptors limits from
+ * the ethernet device information, otherwise adjust them to boundaries.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param nb_rx_desc
+ * A pointer to a uint16_t where the number of receive
+ * descriptors stored.
+ * @param nb_tx_desc
+ * A pointer to a uint16_t where the number of transmit
+ * descriptors stored.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP, -ENODEV or -EINVAL) on failure.
+ */
+int rte_eth_dev_adjust_nb_rx_tx_desc(uint16_t port_id,
+ uint16_t *nb_rx_desc,
+ uint16_t *nb_tx_desc);
+
+/**
+ * Test if a port supports specific mempool ops.
+ *
+ * @param port_id
+ * Port identifier of the Ethernet device.
+ * @param [in] pool
+ * The name of the pool operations to test.
+ * @return
+ * - 0: best mempool ops choice for this port.
+ * - 1: mempool ops are supported for this port.
+ * - -ENOTSUP: mempool ops not supported for this port.
+ * - -ENODEV: Invalid port Identifier.
+ * - -EINVAL: Pool param is null.
+ */
+int
+rte_eth_dev_pool_ops_supported(uint16_t port_id, const char *pool);
+
+/**
+ * Get the security context for the Ethernet device.
+ *
+ * @param port_id
+ * Port identifier of the Ethernet device
+ * @return
+ * - NULL on error.
+ * - pointer to security context on success.
+ */
+void *
+rte_eth_dev_get_sec_ctx(uint16_t port_id);
+
+
+#include <rte_ethdev_core.h>
+
+/**
+ *
+ * Retrieve a burst of input packets from a receive queue of an Ethernet
+ * device. The retrieved packets are stored in *rte_mbuf* structures whose
+ * pointers are supplied in the *rx_pkts* array.
+ *
+ * The rte_eth_rx_burst() function loops, parsing the RX ring of the
+ * receive queue, up to *nb_pkts* packets, and for each completed RX
+ * descriptor in the ring, it performs the following operations:
+ *
+ * - Initialize the *rte_mbuf* data structure associated with the
+ * RX descriptor according to the information provided by the NIC into
+ * that RX descriptor.
+ *
+ * - Store the *rte_mbuf* data structure into the next entry of the
+ * *rx_pkts* array.
+ *
+ * - Replenish the RX descriptor with a new *rte_mbuf* buffer
+ * allocated from the memory pool associated with the receive queue at
+ * initialization time.
+ *
+ * When retrieving an input packet that was scattered by the controller
+ * into multiple receive descriptors, the rte_eth_rx_burst() function
+ * appends the associated *rte_mbuf* buffers to the first buffer of the
+ * packet.
+ *
+ * The rte_eth_rx_burst() function returns the number of packets
+ * actually retrieved, which is the number of *rte_mbuf* data structures
+ * effectively supplied into the *rx_pkts* array.
+ * A return value equal to *nb_pkts* indicates that the RX queue contained
+ * at least *rx_pkts* packets, and this is likely to signify that other
+ * received packets remain in the input queue. Applications implementing
+ * a "retrieve as much received packets as possible" policy can check this
+ * specific case and keep invoking the rte_eth_rx_burst() function until
+ * a value less than *nb_pkts* is returned.
+ *
+ * This receive method has the following advantages:
+ *
+ * - It allows a run-to-completion network stack engine to retrieve and
+ * to immediately process received packets in a fast burst-oriented
+ * approach, avoiding the overhead of unnecessary intermediate packet
+ * queue/dequeue operations.
+ *
+ * - Conversely, it also allows an asynchronous-oriented processing
+ * method to retrieve bursts of received packets and to immediately
+ * queue them for further parallel processing by another logical core,
+ * for instance. However, instead of having received packets being
+ * individually queued by the driver, this approach allows the caller
+ * of the rte_eth_rx_burst() function to queue a burst of retrieved
+ * packets at a time and therefore dramatically reduce the cost of
+ * enqueue/dequeue operations per packet.
+ *
+ * - It allows the rte_eth_rx_burst() function of the driver to take
+ * advantage of burst-oriented hardware features (CPU cache,
+ * prefetch instructions, and so on) to minimize the number of CPU
+ * cycles per packet.
+ *
+ * To summarize, the proposed receive API enables many
+ * burst-oriented optimizations in both synchronous and asynchronous
+ * packet processing environments with no overhead in both cases.
+ *
+ * The rte_eth_rx_burst() function does not provide any error
+ * notification to avoid the corresponding overhead. As a hint, the
+ * upper-level application might check the status of the device link once
+ * being systematically returned a 0 value for a given number of tries.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The index of the receive queue from which to retrieve input packets.
+ * The value must be in the range [0, nb_rx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @param rx_pkts
+ * The address of an array of pointers to *rte_mbuf* structures that
+ * must be large enough to store *nb_pkts* pointers in it.
+ * @param nb_pkts
+ * The maximum number of packets to retrieve.
+ * @return
+ * The number of packets actually retrieved, which is the number
+ * of pointers to *rte_mbuf* structures effectively supplied to the
+ * *rx_pkts* array.
+ */
+static inline uint16_t
+rte_eth_rx_burst(uint16_t port_id, uint16_t queue_id,
+ struct rte_mbuf **rx_pkts, const uint16_t nb_pkts)
+{
+ struct rte_eth_dev *dev = &rte_eth_devices[port_id];
+ uint16_t nb_rx;
+
+#ifdef RTE_LIBRTE_ETHDEV_DEBUG
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, 0);
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->rx_pkt_burst, 0);
+
+ if (queue_id >= dev->data->nb_rx_queues) {
+ RTE_ETHDEV_LOG(ERR, "Invalid RX queue_id=%u\n", queue_id);
+ return 0;
+ }
+#endif
+ nb_rx = (*dev->rx_pkt_burst)(dev->data->rx_queues[queue_id],
+ rx_pkts, nb_pkts);
+
+#ifdef RTE_ETHDEV_RXTX_CALLBACKS
+ if (unlikely(dev->post_rx_burst_cbs[queue_id] != NULL)) {
+ struct rte_eth_rxtx_callback *cb =
+ dev->post_rx_burst_cbs[queue_id];
+
+ do {
+ nb_rx = cb->fn.rx(port_id, queue_id, rx_pkts, nb_rx,
+ nb_pkts, cb->param);
+ cb = cb->next;
+ } while (cb != NULL);
+ }
+#endif
+
+ return nb_rx;
+}
+
+/**
+ * Get the number of used descriptors of a rx queue
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The queue id on the specific port.
+ * @return
+ * The number of used descriptors in the specific queue, or:
+ * (-EINVAL) if *port_id* or *queue_id* is invalid
+ * (-ENOTSUP) if the device does not support this function
+ */
+static inline int
+rte_eth_rx_queue_count(uint16_t port_id, uint16_t queue_id)
+{
+ struct rte_eth_dev *dev;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
+ dev = &rte_eth_devices[port_id];
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_queue_count, -ENOTSUP);
+ if (queue_id >= dev->data->nb_rx_queues)
+ return -EINVAL;
+
+ return (int)(*dev->dev_ops->rx_queue_count)(dev, queue_id);
+}
+
+/**
+ * Check if the DD bit of the specific RX descriptor in the queue has been set
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The queue id on the specific port.
+ * @param offset
+ * The offset of the descriptor ID from tail.
+ * @return
+ * - (1) if the specific DD bit is set.
+ * - (0) if the specific DD bit is not set.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-ENOTSUP) if the device does not support this function
+ */
+static inline int
+rte_eth_rx_descriptor_done(uint16_t port_id, uint16_t queue_id, uint16_t offset)
+{
+ struct rte_eth_dev *dev = &rte_eth_devices[port_id];
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_descriptor_done, -ENOTSUP);
+ return (*dev->dev_ops->rx_descriptor_done)( \
+ dev->data->rx_queues[queue_id], offset);
+}
+
+#define RTE_ETH_RX_DESC_AVAIL 0 /**< Desc available for hw. */
+#define RTE_ETH_RX_DESC_DONE 1 /**< Desc done, filled by hw. */
+#define RTE_ETH_RX_DESC_UNAVAIL 2 /**< Desc used by driver or hw. */
+
+/**
+ * Check the status of a Rx descriptor in the queue
+ *
+ * It should be called in a similar context than the Rx function:
+ * - on a dataplane core
+ * - not concurrently on the same queue
+ *
+ * Since it's a dataplane function, no check is performed on port_id and
+ * queue_id. The caller must therefore ensure that the port is enabled
+ * and the queue is configured and running.
+ *
+ * Note: accessing to a random descriptor in the ring may trigger cache
+ * misses and have a performance impact.
+ *
+ * @param port_id
+ * A valid port identifier of the Ethernet device which.
+ * @param queue_id
+ * A valid Rx queue identifier on this port.
+ * @param offset
+ * The offset of the descriptor starting from tail (0 is the next
+ * packet to be received by the driver).
+ *
+ * @return
+ * - (RTE_ETH_RX_DESC_AVAIL): Descriptor is available for the hardware to
+ * receive a packet.
+ * - (RTE_ETH_RX_DESC_DONE): Descriptor is done, it is filled by hw, but
+ * not yet processed by the driver (i.e. in the receive queue).
+ * - (RTE_ETH_RX_DESC_UNAVAIL): Descriptor is unavailable, either hold by
+ * the driver and not yet returned to hw, or reserved by the hw.
+ * - (-EINVAL) bad descriptor offset.
+ * - (-ENOTSUP) if the device does not support this function.
+ * - (-ENODEV) bad port or queue (only if compiled with debug).
+ */
+static inline int
+rte_eth_rx_descriptor_status(uint16_t port_id, uint16_t queue_id,
+ uint16_t offset)
+{
+ struct rte_eth_dev *dev;
+ void *rxq;
+
+#ifdef RTE_LIBRTE_ETHDEV_DEBUG
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+#endif
+ dev = &rte_eth_devices[port_id];
+#ifdef RTE_LIBRTE_ETHDEV_DEBUG
+ if (queue_id >= dev->data->nb_rx_queues)
+ return -ENODEV;
+#endif
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_descriptor_status, -ENOTSUP);
+ rxq = dev->data->rx_queues[queue_id];
+
+ return (*dev->dev_ops->rx_descriptor_status)(rxq, offset);
+}
+
+#define RTE_ETH_TX_DESC_FULL 0 /**< Desc filled for hw, waiting xmit. */
+#define RTE_ETH_TX_DESC_DONE 1 /**< Desc done, packet is transmitted. */
+#define RTE_ETH_TX_DESC_UNAVAIL 2 /**< Desc used by driver or hw. */
+
+/**
+ * Check the status of a Tx descriptor in the queue.
+ *
+ * It should be called in a similar context than the Tx function:
+ * - on a dataplane core
+ * - not concurrently on the same queue
+ *
+ * Since it's a dataplane function, no check is performed on port_id and
+ * queue_id. The caller must therefore ensure that the port is enabled
+ * and the queue is configured and running.
+ *
+ * Note: accessing to a random descriptor in the ring may trigger cache
+ * misses and have a performance impact.
+ *
+ * @param port_id
+ * A valid port identifier of the Ethernet device which.
+ * @param queue_id
+ * A valid Tx queue identifier on this port.
+ * @param offset
+ * The offset of the descriptor starting from tail (0 is the place where
+ * the next packet will be send).
+ *
+ * @return
+ * - (RTE_ETH_TX_DESC_FULL) Descriptor is being processed by the hw, i.e.
+ * in the transmit queue.
+ * - (RTE_ETH_TX_DESC_DONE) Hardware is done with this descriptor, it can
+ * be reused by the driver.
+ * - (RTE_ETH_TX_DESC_UNAVAIL): Descriptor is unavailable, reserved by the
+ * driver or the hardware.
+ * - (-EINVAL) bad descriptor offset.
+ * - (-ENOTSUP) if the device does not support this function.
+ * - (-ENODEV) bad port or queue (only if compiled with debug).
+ */
+static inline int rte_eth_tx_descriptor_status(uint16_t port_id,
+ uint16_t queue_id, uint16_t offset)
+{
+ struct rte_eth_dev *dev;
+ void *txq;
+
+#ifdef RTE_LIBRTE_ETHDEV_DEBUG
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+#endif
+ dev = &rte_eth_devices[port_id];
+#ifdef RTE_LIBRTE_ETHDEV_DEBUG
+ if (queue_id >= dev->data->nb_tx_queues)
+ return -ENODEV;
+#endif
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->tx_descriptor_status, -ENOTSUP);
+ txq = dev->data->tx_queues[queue_id];
+
+ return (*dev->dev_ops->tx_descriptor_status)(txq, offset);
+}
+
+/**
+ * Send a burst of output packets on a transmit queue of an Ethernet device.
+ *
+ * The rte_eth_tx_burst() function is invoked to transmit output packets
+ * on the output queue *queue_id* of the Ethernet device designated by its
+ * *port_id*.
+ * The *nb_pkts* parameter is the number of packets to send which are
+ * supplied in the *tx_pkts* array of *rte_mbuf* structures, each of them
+ * allocated from a pool created with rte_pktmbuf_pool_create().
+ * The rte_eth_tx_burst() function loops, sending *nb_pkts* packets,
+ * up to the number of transmit descriptors available in the TX ring of the
+ * transmit queue.
+ * For each packet to send, the rte_eth_tx_burst() function performs
+ * the following operations:
+ *
+ * - Pick up the next available descriptor in the transmit ring.
+ *
+ * - Free the network buffer previously sent with that descriptor, if any.
+ *
+ * - Initialize the transmit descriptor with the information provided
+ * in the *rte_mbuf data structure.
+ *
+ * In the case of a segmented packet composed of a list of *rte_mbuf* buffers,
+ * the rte_eth_tx_burst() function uses several transmit descriptors
+ * of the ring.
+ *
+ * The rte_eth_tx_burst() function returns the number of packets it
+ * actually sent. A return value equal to *nb_pkts* means that all packets
+ * have been sent, and this is likely to signify that other output packets
+ * could be immediately transmitted again. Applications that implement a
+ * "send as many packets to transmit as possible" policy can check this
+ * specific case and keep invoking the rte_eth_tx_burst() function until
+ * a value less than *nb_pkts* is returned.
+ *
+ * It is the responsibility of the rte_eth_tx_burst() function to
+ * transparently free the memory buffers of packets previously sent.
+ * This feature is driven by the *tx_free_thresh* value supplied to the
+ * rte_eth_dev_configure() function at device configuration time.
+ * When the number of free TX descriptors drops below this threshold, the
+ * rte_eth_tx_burst() function must [attempt to] free the *rte_mbuf* buffers
+ * of those packets whose transmission was effectively completed.
+ *
+ * If the PMD is DEV_TX_OFFLOAD_MT_LOCKFREE capable, multiple threads can
+ * invoke this function concurrently on the same tx queue without SW lock.
+ * @see rte_eth_dev_info_get, struct rte_eth_txconf::offloads
+ *
+ * @see rte_eth_tx_prepare to perform some prior checks or adjustments
+ * for offloads.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The index of the transmit queue through which output packets must be
+ * sent.
+ * The value must be in the range [0, nb_tx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @param tx_pkts
+ * The address of an array of *nb_pkts* pointers to *rte_mbuf* structures
+ * which contain the output packets.
+ * @param nb_pkts
+ * The maximum number of packets to transmit.
+ * @return
+ * The number of output packets actually stored in transmit descriptors of
+ * the transmit ring. The return value can be less than the value of the
+ * *tx_pkts* parameter when the transmit ring is full or has been filled up.
+ */
+static inline uint16_t
+rte_eth_tx_burst(uint16_t port_id, uint16_t queue_id,
+ struct rte_mbuf **tx_pkts, uint16_t nb_pkts)
+{
+ struct rte_eth_dev *dev = &rte_eth_devices[port_id];
+
+#ifdef RTE_LIBRTE_ETHDEV_DEBUG
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, 0);
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->tx_pkt_burst, 0);
+
+ if (queue_id >= dev->data->nb_tx_queues) {
+ RTE_ETHDEV_LOG(ERR, "Invalid TX queue_id=%u\n", queue_id);
+ return 0;
+ }
+#endif
+
+#ifdef RTE_ETHDEV_RXTX_CALLBACKS
+ struct rte_eth_rxtx_callback *cb = dev->pre_tx_burst_cbs[queue_id];
+
+ if (unlikely(cb != NULL)) {
+ do {
+ nb_pkts = cb->fn.tx(port_id, queue_id, tx_pkts, nb_pkts,
+ cb->param);
+ cb = cb->next;
+ } while (cb != NULL);
+ }
+#endif
+
+ return (*dev->tx_pkt_burst)(dev->data->tx_queues[queue_id], tx_pkts, nb_pkts);
+}
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Process a burst of output packets on a transmit queue of an Ethernet device.
+ *
+ * The rte_eth_tx_prepare() function is invoked to prepare output packets to be
+ * transmitted on the output queue *queue_id* of the Ethernet device designated
+ * by its *port_id*.
+ * The *nb_pkts* parameter is the number of packets to be prepared which are
+ * supplied in the *tx_pkts* array of *rte_mbuf* structures, each of them
+ * allocated from a pool created with rte_pktmbuf_pool_create().
+ * For each packet to send, the rte_eth_tx_prepare() function performs
+ * the following operations:
+ *
+ * - Check if packet meets devices requirements for tx offloads.
+ *
+ * - Check limitations about number of segments.
+ *
+ * - Check additional requirements when debug is enabled.
+ *
+ * - Update and/or reset required checksums when tx offload is set for packet.
+ *
+ * Since this function can modify packet data, provided mbufs must be safely
+ * writable (e.g. modified data cannot be in shared segment).
+ *
+ * The rte_eth_tx_prepare() function returns the number of packets ready to be
+ * sent. A return value equal to *nb_pkts* means that all packets are valid and
+ * ready to be sent, otherwise stops processing on the first invalid packet and
+ * leaves the rest packets untouched.
+ *
+ * When this functionality is not implemented in the driver, all packets are
+ * are returned untouched.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * The value must be a valid port id.
+ * @param queue_id
+ * The index of the transmit queue through which output packets must be
+ * sent.
+ * The value must be in the range [0, nb_tx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @param tx_pkts
+ * The address of an array of *nb_pkts* pointers to *rte_mbuf* structures
+ * which contain the output packets.
+ * @param nb_pkts
+ * The maximum number of packets to process.
+ * @return
+ * The number of packets correct and ready to be sent. The return value can be
+ * less than the value of the *tx_pkts* parameter when some packet doesn't
+ * meet devices requirements with rte_errno set appropriately:
+ * - -EINVAL: offload flags are not correctly set
+ * - -ENOTSUP: the offload feature is not supported by the hardware
+ *
+ */
+
+#ifndef RTE_ETHDEV_TX_PREPARE_NOOP
+
+static inline uint16_t
+rte_eth_tx_prepare(uint16_t port_id, uint16_t queue_id,
+ struct rte_mbuf **tx_pkts, uint16_t nb_pkts)
+{
+ struct rte_eth_dev *dev;
+
+#ifdef RTE_LIBRTE_ETHDEV_DEBUG
+ if (!rte_eth_dev_is_valid_port(port_id)) {
+ RTE_ETHDEV_LOG(ERR, "Invalid TX port_id=%u\n", port_id);
+ rte_errno = -EINVAL;
+ return 0;
+ }
+#endif
+
+ dev = &rte_eth_devices[port_id];
+
+#ifdef RTE_LIBRTE_ETHDEV_DEBUG
+ if (queue_id >= dev->data->nb_tx_queues) {
+ RTE_ETHDEV_LOG(ERR, "Invalid TX queue_id=%u\n", queue_id);
+ rte_errno = -EINVAL;
+ return 0;
+ }
+#endif
+
+ if (!dev->tx_pkt_prepare)
+ return nb_pkts;
+
+ return (*dev->tx_pkt_prepare)(dev->data->tx_queues[queue_id],
+ tx_pkts, nb_pkts);
+}
+
+#else
+
+/*
+ * Native NOOP operation for compilation targets which doesn't require any
+ * preparations steps, and functional NOOP may introduce unnecessary performance
+ * drop.
+ *
+ * Generally this is not a good idea to turn it on globally and didn't should
+ * be used if behavior of tx_preparation can change.
+ */
+
+static inline uint16_t
+rte_eth_tx_prepare(__rte_unused uint16_t port_id,
+ __rte_unused uint16_t queue_id,
+ __rte_unused struct rte_mbuf **tx_pkts, uint16_t nb_pkts)
+{
+ return nb_pkts;
+}
+
+#endif
+
+/**
+ * Send any packets queued up for transmission on a port and HW queue
+ *
+ * This causes an explicit flush of packets previously buffered via the
+ * rte_eth_tx_buffer() function. It returns the number of packets successfully
+ * sent to the NIC, and calls the error callback for any unsent packets. Unless
+ * explicitly set up otherwise, the default callback simply frees the unsent
+ * packets back to the owning mempool.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The index of the transmit queue through which output packets must be
+ * sent.
+ * The value must be in the range [0, nb_tx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @param buffer
+ * Buffer of packets to be transmit.
+ * @return
+ * The number of packets successfully sent to the Ethernet device. The error
+ * callback is called for any packets which could not be sent.
+ */
+static inline uint16_t
+rte_eth_tx_buffer_flush(uint16_t port_id, uint16_t queue_id,
+ struct rte_eth_dev_tx_buffer *buffer)
+{
+ uint16_t sent;
+ uint16_t to_send = buffer->length;
+
+ if (to_send == 0)
+ return 0;
+
+ sent = rte_eth_tx_burst(port_id, queue_id, buffer->pkts, to_send);
+
+ buffer->length = 0;
+
+ /* All packets sent, or to be dealt with by callback below */
+ if (unlikely(sent != to_send))
+ buffer->error_callback(&buffer->pkts[sent],
+ (uint16_t)(to_send - sent),
+ buffer->error_userdata);
+
+ return sent;
+}
+
+/**
+ * Buffer a single packet for future transmission on a port and queue
+ *
+ * This function takes a single mbuf/packet and buffers it for later
+ * transmission on the particular port and queue specified. Once the buffer is
+ * full of packets, an attempt will be made to transmit all the buffered
+ * packets. In case of error, where not all packets can be transmitted, a
+ * callback is called with the unsent packets as a parameter. If no callback
+ * is explicitly set up, the unsent packets are just freed back to the owning
+ * mempool. The function returns the number of packets actually sent i.e.
+ * 0 if no buffer flush occurred, otherwise the number of packets successfully
+ * flushed
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The index of the transmit queue through which output packets must be
+ * sent.
+ * The value must be in the range [0, nb_tx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @param buffer
+ * Buffer used to collect packets to be sent.
+ * @param tx_pkt
+ * Pointer to the packet mbuf to be sent.
+ * @return
+ * 0 = packet has been buffered for later transmission
+ * N > 0 = packet has been buffered, and the buffer was subsequently flushed,
+ * causing N packets to be sent, and the error callback to be called for
+ * the rest.
+ */
+static __rte_always_inline uint16_t
+rte_eth_tx_buffer(uint16_t port_id, uint16_t queue_id,
+ struct rte_eth_dev_tx_buffer *buffer, struct rte_mbuf *tx_pkt)
+{
+ buffer->pkts[buffer->length++] = tx_pkt;
+ if (buffer->length < buffer->size)
+ return 0;
+
+ return rte_eth_tx_buffer_flush(port_id, queue_id, buffer);
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_ETHDEV_H_ */