New upstream version 18.08upstream/18.08

Change-Id: I32fdf5e5016556d9c0a6d88ddaf1fc468961790a
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>

1 files changed, 357 insertions, 0 deletions

diff --git a/lib/librte_ethdev/rte_ethdev_driver.h b/lib/librte_ethdev/rte_ethdev_driver.h
new file mode 100644
index 00000000..c6d9bc1a
--- /dev/null
+++ b/lib/librte_ethdev/rte_ethdev_driver.h
@@ -0,0 +1,357 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2017 Intel Corporation
+ */
+
+#ifndef _RTE_ETHDEV_DRIVER_H_
+#define _RTE_ETHDEV_DRIVER_H_
+
+/**
+ * @file
+ *
+ * RTE Ethernet Device PMD API
+ *
+ * These APIs for the use from Ethernet drivers, user applications shouldn't
+ * use them.
+ *
+ */
+
+#include <rte_ethdev.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @internal
+ * Returns a ethdev slot specified by the unique identifier name.
+ *
+ * @param	name
+ *  The pointer to the Unique identifier name for each Ethernet device
+ * @return
+ *   - The pointer to the ethdev slot, on success. NULL on error
+ */
+struct rte_eth_dev *rte_eth_dev_allocated(const char *name);
+
+/**
+ * @internal
+ * Allocates a new ethdev slot for an ethernet device and returns the pointer
+ * to that slot for the driver to use.
+ *
+ * @param	name	Unique identifier name for each Ethernet device
+ * @return
+ *   - Slot in the rte_dev_devices array for a new device;
+ */
+struct rte_eth_dev *rte_eth_dev_allocate(const char *name);
+
+/**
+ * @internal
+ * Attach to the ethdev already initialized by the primary
+ * process.
+ *
+ * @param       name    Ethernet device's name.
+ * @return
+ *   - Success: Slot in the rte_dev_devices array for attached
+ *        device.
+ *   - Error: Null pointer.
+ */
+struct rte_eth_dev *rte_eth_dev_attach_secondary(const char *name);
+
+/**
+ * @internal
+ * Release the specified ethdev port.
+ *
+ * @param eth_dev
+ * The *eth_dev* pointer is the address of the *rte_eth_dev* structure.
+ * @return
+ *   - 0 on success, negative on error
+ */
+int rte_eth_dev_release_port(struct rte_eth_dev *eth_dev);
+
+/**
+ * @internal
+ * Release device queues and clear its configuration to force the user
+ * application to reconfigure it. It is for internal use only.
+ *
+ * @param dev
+ *  Pointer to struct rte_eth_dev.
+ *
+ * @return
+ *  void
+ */
+void _rte_eth_dev_reset(struct rte_eth_dev *dev);
+
+/**
+ * @internal Executes all the user application registered callbacks for
+ * the specific device. It is for DPDK internal user only. User
+ * application should not call it directly.
+ *
+ * @param dev
+ *  Pointer to struct rte_eth_dev.
+ * @param event
+ *  Eth device interrupt event type.
+ * @param ret_param
+ *  To pass data back to user application.
+ *  This allows the user application to decide if a particular function
+ *  is permitted or not.
+ *
+ * @return
+ *  int
+ */
+int _rte_eth_dev_callback_process(struct rte_eth_dev *dev,
+		enum rte_eth_event_type event, void *ret_param);
+
+/**
+ * @internal
+ * This is the last step of device probing.
+ * It must be called after a port is allocated and initialized successfully.
+ *
+ * The notification RTE_ETH_EVENT_NEW is sent to other entities
+ * (libraries and applications).
+ * The state is set as RTE_ETH_DEV_ATTACHED.
+ *
+ * @param dev
+ *  New ethdev port.
+ */
+void rte_eth_dev_probing_finish(struct rte_eth_dev *dev);
+
+/**
+ * Create memzone for HW rings.
+ * malloc can't be used as the physical address is needed.
+ * If the memzone is already created, then this function returns a ptr
+ * to the old one.
+ *
+ * @param eth_dev
+ *   The *eth_dev* pointer is the address of the *rte_eth_dev* structure
+ * @param name
+ *   The name of the memory zone
+ * @param queue_id
+ *   The index of the queue to add to name
+ * @param size
+ *   The sizeof of the memory area
+ * @param align
+ *   Alignment for resulting memzone. Must be a power of 2.
+ * @param socket_id
+ *   The *socket_id* argument is the socket identifier in case of NUMA.
+ */
+const struct rte_memzone *
+rte_eth_dma_zone_reserve(const struct rte_eth_dev *eth_dev, const char *name,
+			 uint16_t queue_id, size_t size,
+			 unsigned align, int socket_id);
+
+/**
+ * @internal
+ * Atomically set the link status for the specific device.
+ * It is for use by DPDK device driver use only.
+ * User applications should not call it
+ *
+ * @param dev
+ *  Pointer to struct rte_eth_dev.
+ * @param link
+ *  New link status value.
+ * @return
+ *  Same convention as eth_link_update operation.
+ *  0   if link up status has changed
+ *  -1  if link up status was unchanged
+ */
+static inline int
+rte_eth_linkstatus_set(struct rte_eth_dev *dev,
+		       const struct rte_eth_link *new_link)
+{
+	volatile uint64_t *dev_link
+		 = (volatile uint64_t *)&(dev->data->dev_link);
+	union {
+		uint64_t val64;
+		struct rte_eth_link link;
+	} orig;
+
+	RTE_BUILD_BUG_ON(sizeof(*new_link) != sizeof(uint64_t));
+
+	orig.val64 = rte_atomic64_exchange(dev_link,
+					   *(const uint64_t *)new_link);
+
+	return (orig.link.link_status == new_link->link_status) ? -1 : 0;
+}
+
+/**
+ * @internal
+ * Atomically get the link speed and status.
+ *
+ * @param dev
+ *  Pointer to struct rte_eth_dev.
+ * @param link
+ *  link status value.
+ */
+static inline void
+rte_eth_linkstatus_get(const struct rte_eth_dev *dev,
+		       struct rte_eth_link *link)
+{
+	volatile uint64_t *src = (uint64_t *)&(dev->data->dev_link);
+	uint64_t *dst = (uint64_t *)link;
+
+	RTE_BUILD_BUG_ON(sizeof(*link) != sizeof(uint64_t));
+
+#ifdef __LP64__
+	/* if cpu arch has 64 bit unsigned lon then implicitly atomic */
+	*dst = *src;
+#else
+	/* can't use rte_atomic64_read because it returns signed int */
+	do {
+		*dst = *src;
+	} while (!rte_atomic64_cmpset(src, *dst, *dst));
+#endif
+}
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Allocate an unique switch domain identifier.
+ *
+ * A pool of switch domain identifiers which can be allocated on request. This
+ * will enabled devices which support the concept of switch domains to request
+ * a switch domain id which is guaranteed to be unique from other devices
+ * running in the same process.
+ *
+ * @param domain_id
+ *  switch domain identifier parameter to pass back to application
+ *
+ * @return
+ *   Negative errno value on error, 0 on success.
+ */
+int __rte_experimental
+rte_eth_switch_domain_alloc(uint16_t *domain_id);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Free switch domain.
+ *
+ * Return a switch domain identifier to the pool of free identifiers after it is
+ * no longer in use by device.
+ *
+ * @param domain_id
+ *  switch domain identifier to free
+ *
+ * @return
+ *   Negative errno value on error, 0 on success.
+ */
+int __rte_experimental
+rte_eth_switch_domain_free(uint16_t domain_id);
+
+/** Generic Ethernet device arguments  */
+struct rte_eth_devargs {
+	uint16_t ports[RTE_MAX_ETHPORTS];
+	/** port/s number to enable on a multi-port single function */
+	uint16_t nb_ports;
+	/** number of ports in ports field */
+	uint16_t representor_ports[RTE_MAX_ETHPORTS];
+	/** representor port/s identifier to enable on device */
+	uint16_t nb_representor_ports;
+	/** number of ports in representor port field */
+};
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * PMD helper function to parse ethdev arguments
+ *
+ * @param devargs
+ *  device arguments
+ * @param eth_devargs
+ *  parsed ethdev specific arguments.
+ *
+ * @return
+ *   Negative errno value on error, 0 on success.
+ */
+int __rte_experimental
+rte_eth_devargs_parse(const char *devargs, struct rte_eth_devargs *eth_devargs);
+
+
+typedef int (*ethdev_init_t)(struct rte_eth_dev *ethdev, void *init_params);
+typedef int (*ethdev_bus_specific_init)(struct rte_eth_dev *ethdev,
+	void *bus_specific_init_params);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * PMD helper function for the creation of a new ethdev ports.
+ *
+ * @param device
+ *  rte_device handle.
+ * @param name
+ *  port name.
+ * @param priv_data_size
+ *  size of private data required for port.
+ * @param bus_specific_init
+ *  port bus specific initialisation callback function
+ * @param bus_init_params
+ *  port bus specific initialisation parameters
+ * @param ethdev_init
+ *  device specific port initialization callback function
+ * @param init_params
+ *  port initialisation parameters
+ *
+ * @return
+ *   Negative errno value on error, 0 on success.
+ */
+int __rte_experimental
+rte_eth_dev_create(struct rte_device *device, const char *name,
+	size_t priv_data_size,
+	ethdev_bus_specific_init bus_specific_init, void *bus_init_params,
+	ethdev_init_t ethdev_init, void *init_params);
+
+
+typedef int (*ethdev_uninit_t)(struct rte_eth_dev *ethdev);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * PMD helper function for cleaing up the resources of a ethdev port on it's
+ * destruction.
+ *
+ * @param ethdev
+ *   ethdev handle of port.
+ * @param ethdev_uninit
+ *   device specific port un-initialise callback function
+ *
+ * @return
+ *   Negative errno value on error, 0 on success.
+ */
+int __rte_experimental
+rte_eth_dev_destroy(struct rte_eth_dev *ethdev, ethdev_uninit_t ethdev_uninit);
+
+/**
+ * PMD helper function to check if keeping CRC is requested
+ *
+ * @note
+ * When CRC_STRIP offload flag is removed and default behavior switch to
+ * strip CRC, as planned, this helper function is not that useful and will be
+ * removed. In PMDs this function will be replaced with check:
+ *   if (offloads & DEV_RX_OFFLOAD_KEEP_CRC)
+ *
+ * @param rx_offloads
+ *   offload bits to be applied
+ *
+ * @return
+ *   Return positive if keeping CRC is requested,
+ *   zero if stripping CRC is requested
+ */
+static inline int
+rte_eth_dev_must_keep_crc(uint64_t rx_offloads)
+{
+	if (rx_offloads & DEV_RX_OFFLOAD_CRC_STRIP)
+		return 0;
+
+	/* no KEEP_CRC or CRC_STRIP offload flags means keep CRC */
+	return 1;
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_ETHDEV_DRIVER_H_ */