diff options
author | 2017-08-16 18:42:05 +0100 | |
---|---|---|
committer | 2017-08-16 18:46:04 +0100 | |
commit | f239aed5e674965691846e8ce3f187dd47523689 (patch) | |
tree | a153a3125c6e183c73871a8ecaa4b285fed5fbd5 /lib/librte_ether/rte_flow.h | |
parent | bf7567fd2a5b0b28ab724046143c24561d38d015 (diff) |
New upstream version 17.08
Change-Id: I288b50990f52646089d6b1f3aaa6ba2f091a51d7
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
Diffstat (limited to 'lib/librte_ether/rte_flow.h')
-rw-r--r-- | lib/librte_ether/rte_flow.h | 176 |
1 files changed, 147 insertions, 29 deletions
diff --git a/lib/librte_ether/rte_flow.h b/lib/librte_ether/rte_flow.h index c47edbc9..bba6169f 100644 --- a/lib/librte_ether/rte_flow.h +++ b/lib/librte_ether/rte_flow.h @@ -297,6 +297,18 @@ enum rte_flow_item_type { * See struct rte_flow_item_gre. */ RTE_FLOW_ITEM_TYPE_GRE, + + /** + * [META] + * + * Fuzzy pattern match, expect faster than default. + * + * This is for device that support fuzzy matching option. + * Usually a fuzzy matching is fast but the cost is accuracy. + * + * See struct rte_flow_item_fuzzy. + */ + RTE_FLOW_ITEM_TYPE_FUZZY, }; /** @@ -429,7 +441,7 @@ static const struct rte_flow_item_raw rte_flow_item_raw_mask = { struct rte_flow_item_eth { struct ether_addr dst; /**< Destination MAC. */ struct ether_addr src; /**< Source MAC. */ - uint16_t type; /**< EtherType. */ + rte_be16_t type; /**< EtherType. */ }; /** Default mask for RTE_FLOW_ITEM_TYPE_ETH. */ @@ -437,7 +449,7 @@ struct rte_flow_item_eth { static const struct rte_flow_item_eth rte_flow_item_eth_mask = { .dst.addr_bytes = "\xff\xff\xff\xff\xff\xff", .src.addr_bytes = "\xff\xff\xff\xff\xff\xff", - .type = 0x0000, + .type = RTE_BE16(0x0000), }; #endif @@ -450,15 +462,15 @@ static const struct rte_flow_item_eth rte_flow_item_eth_mask = { * RTE_FLOW_ITEM_TYPE_VLAN. */ struct rte_flow_item_vlan { - uint16_t tpid; /**< Tag protocol identifier. */ - uint16_t tci; /**< Tag control information. */ + rte_be16_t tpid; /**< Tag protocol identifier. */ + rte_be16_t tci; /**< Tag control information. */ }; /** Default mask for RTE_FLOW_ITEM_TYPE_VLAN. */ #ifndef __cplusplus static const struct rte_flow_item_vlan rte_flow_item_vlan_mask = { - .tpid = 0x0000, - .tci = 0xffff, + .tpid = RTE_BE16(0x0000), + .tci = RTE_BE16(0xffff), }; #endif @@ -477,8 +489,8 @@ struct rte_flow_item_ipv4 { #ifndef __cplusplus static const struct rte_flow_item_ipv4 rte_flow_item_ipv4_mask = { .hdr = { - .src_addr = 0xffffffff, - .dst_addr = 0xffffffff, + .src_addr = RTE_BE32(0xffffffff), + .dst_addr = RTE_BE32(0xffffffff), }, }; #endif @@ -540,8 +552,8 @@ struct rte_flow_item_udp { #ifndef __cplusplus static const struct rte_flow_item_udp rte_flow_item_udp_mask = { .hdr = { - .src_port = 0xffff, - .dst_port = 0xffff, + .src_port = RTE_BE16(0xffff), + .dst_port = RTE_BE16(0xffff), }, }; #endif @@ -559,8 +571,8 @@ struct rte_flow_item_tcp { #ifndef __cplusplus static const struct rte_flow_item_tcp rte_flow_item_tcp_mask = { .hdr = { - .src_port = 0xffff, - .dst_port = 0xffff, + .src_port = RTE_BE16(0xffff), + .dst_port = RTE_BE16(0xffff), }, }; #endif @@ -578,8 +590,8 @@ struct rte_flow_item_sctp { #ifndef __cplusplus static const struct rte_flow_item_sctp rte_flow_item_sctp_mask = { .hdr = { - .src_port = 0xffff, - .dst_port = 0xffff, + .src_port = RTE_BE16(0xffff), + .dst_port = RTE_BE16(0xffff), }, }; #endif @@ -609,14 +621,14 @@ static const struct rte_flow_item_vxlan rte_flow_item_vxlan_mask = { * Matches a E-tag header. */ struct rte_flow_item_e_tag { - uint16_t tpid; /**< Tag protocol identifier (0x893F). */ + rte_be16_t tpid; /**< Tag protocol identifier (0x893F). */ /** * E-Tag control information (E-TCI). * E-PCP (3b), E-DEI (1b), ingress E-CID base (12b). */ - uint16_t epcp_edei_in_ecid_b; + rte_be16_t epcp_edei_in_ecid_b; /** Reserved (2b), GRP (2b), E-CID base (12b). */ - uint16_t rsvd_grp_ecid_b; + rte_be16_t rsvd_grp_ecid_b; uint8_t in_ecid_e; /**< Ingress E-CID ext. */ uint8_t ecid_e; /**< E-CID ext. */ }; @@ -624,13 +636,7 @@ struct rte_flow_item_e_tag { /** Default mask for RTE_FLOW_ITEM_TYPE_E_TAG. */ #ifndef __cplusplus static const struct rte_flow_item_e_tag rte_flow_item_e_tag_mask = { -#if RTE_BYTE_ORDER == RTE_BIG_ENDIAN - .rsvd_grp_ecid_b = 0x3fff, -#elif RTE_BYTE_ORDER == RTE_LITTLE_ENDIAN - .rsvd_grp_ecid_b = 0xff3f, -#else -#error Unsupported endianness. -#endif + .rsvd_grp_ecid_b = RTE_BE16(0x3fff), }; #endif @@ -646,8 +652,8 @@ struct rte_flow_item_nvgre { * * c_k_s_rsvd0_ver must have value 0x2000 according to RFC 7637. */ - uint16_t c_k_s_rsvd0_ver; - uint16_t protocol; /**< Protocol type (0x6558). */ + rte_be16_t c_k_s_rsvd0_ver; + rte_be16_t protocol; /**< Protocol type (0x6558). */ uint8_t tni[3]; /**< Virtual subnet ID. */ uint8_t flow_id; /**< Flow ID. */ }; @@ -689,14 +695,42 @@ struct rte_flow_item_gre { * Checksum (1b), reserved 0 (12b), version (3b). * Refer to RFC 2784. */ - uint16_t c_rsvd0_ver; - uint16_t protocol; /**< Protocol type. */ + rte_be16_t c_rsvd0_ver; + rte_be16_t protocol; /**< Protocol type. */ }; /** Default mask for RTE_FLOW_ITEM_TYPE_GRE. */ #ifndef __cplusplus static const struct rte_flow_item_gre rte_flow_item_gre_mask = { - .protocol = 0xffff, + .protocol = RTE_BE16(0xffff), +}; +#endif + +/** + * RTE_FLOW_ITEM_TYPE_FUZZY + * + * Fuzzy pattern match, expect faster than default. + * + * This is for device that support fuzzy match option. + * Usually a fuzzy match is fast but the cost is accuracy. + * i.e. Signature Match only match pattern's hash value, but it is + * possible two different patterns have the same hash value. + * + * Matching accuracy level can be configure by threshold. + * Driver can divide the range of threshold and map to different + * accuracy levels that device support. + * + * Threshold 0 means perfect match (no fuzziness), while threshold + * 0xffffffff means fuzziest match. + */ +struct rte_flow_item_fuzzy { + uint32_t thresh; /**< Accuracy threshold. */ +}; + +/** Default mask for RTE_FLOW_ITEM_TYPE_FUZZY. */ +#ifndef __cplusplus +static const struct rte_flow_item_fuzzy rte_flow_item_fuzzy_mask = { + .thresh = 0xffffffff, }; #endif @@ -1191,6 +1225,90 @@ rte_flow_query(uint8_t port_id, void *data, struct rte_flow_error *error); +/** + * Restrict ingress traffic to the defined flow rules. + * + * Isolated mode guarantees that all ingress traffic comes from defined flow + * rules only (current and future). + * + * Besides making ingress more deterministic, it allows PMDs to safely reuse + * resources otherwise assigned to handle the remaining traffic, such as + * global RSS configuration settings, VLAN filters, MAC address entries, + * legacy filter API rules and so on in order to expand the set of possible + * flow rule types. + * + * Calling this function as soon as possible after device initialization, + * ideally before the first call to rte_eth_dev_configure(), is recommended + * to avoid possible failures due to conflicting settings. + * + * Once effective, leaving isolated mode may not be possible depending on + * PMD implementation. + * + * Additionally, the following functionality has no effect on the underlying + * port and may return errors such as ENOTSUP ("not supported"): + * + * - Toggling promiscuous mode. + * - Toggling allmulticast mode. + * - Configuring MAC addresses. + * - Configuring multicast addresses. + * - Configuring VLAN filters. + * - Configuring Rx filters through the legacy API (e.g. FDIR). + * - Configuring global RSS settings. + * + * @param port_id + * Port identifier of Ethernet device. + * @param set + * Nonzero to enter isolated mode, attempt to leave it otherwise. + * @param[out] error + * Perform verbose error reporting if not NULL. PMDs initialize this + * structure in case of error only. + * + * @return + * 0 on success, a negative errno value otherwise and rte_errno is set. + */ +int +rte_flow_isolate(uint8_t port_id, int set, struct rte_flow_error *error); + +/** + * Generic flow representation. + * + * This form is sufficient to describe an rte_flow independently from any + * PMD implementation and allows for replayability and identification. + */ +struct rte_flow_desc { + size_t size; /**< Allocated space including data[]. */ + struct rte_flow_attr attr; /**< Attributes. */ + struct rte_flow_item *items; /**< Items. */ + struct rte_flow_action *actions; /**< Actions. */ + uint8_t data[]; /**< Storage for items/actions. */ +}; + +/** + * Copy an rte_flow rule description. + * + * @param[in] fd + * Flow rule description. + * @param[in] len + * Total size of allocated data for the flow description. + * @param[in] attr + * Flow rule attributes. + * @param[in] items + * Pattern specification (list terminated by the END pattern item). + * @param[in] actions + * Associated actions (list terminated by the END action). + * + * @return + * If len is greater or equal to the size of the flow, the total size of the + * flow description and its data. + * If len is lower than the size of the flow, the number of bytes that would + * have been written to desc had it been sufficient. Nothing is written. + */ +size_t +rte_flow_copy(struct rte_flow_desc *fd, size_t len, + const struct rte_flow_attr *attr, + const struct rte_flow_item *items, + const struct rte_flow_action *actions); + #ifdef __cplusplus } #endif |