Imported Upstream version 16.04

Change-Id: I77eadcd8538a9122e4773cbe55b24033dc451757
Signed-off-by: C.J. Collier <cjcollier@linuxfoundation.org>

7 files changed, 9169 insertions, 0 deletions

diff --git a/lib/librte_ether/Makefile b/lib/librte_ether/Makefile
new file mode 100644
index 00000000..e8102846
--- /dev/null
+++ b/lib/librte_ether/Makefile
@@ -0,0 +1,59 @@
+#   BSD LICENSE
+#
+#   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+#   All rights reserved.
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+#
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+#
+# library name
+#
+LIB = libethdev.a
+
+CFLAGS += -O3
+CFLAGS += $(WERROR_FLAGS)
+
+EXPORT_MAP := rte_ether_version.map
+
+LIBABIVER := 3
+
+SRCS-y += rte_ethdev.c
+
+#
+# Export include files
+#
+SYMLINK-y-include += rte_ether.h
+SYMLINK-y-include += rte_ethdev.h
+SYMLINK-y-include += rte_eth_ctrl.h
+SYMLINK-y-include += rte_dev_info.h
+
+# this lib depends upon:
+DEPDIRS-y += lib/librte_eal lib/librte_mempool lib/librte_ring lib/librte_mbuf
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/lib/librte_ether/rte_dev_info.h b/lib/librte_ether/rte_dev_info.h
new file mode 100644
index 00000000..291bd4d7
--- /dev/null
+++ b/lib/librte_ether/rte_dev_info.h
@@ -0,0 +1,57 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2015 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_DEV_INFO_H_
+#define _RTE_DEV_INFO_H_
+
+/*
+ * Placeholder for accessing device registers
+ */
+struct rte_dev_reg_info {
+	void *data; /**< Buffer for return registers */
+	uint32_t offset; /**< Start register table location for access */
+	uint32_t length; /**< Number of registers to fetch */
+	uint32_t version; /**< Device version */
+};
+
+/*
+ * Placeholder for accessing device eeprom
+ */
+struct rte_dev_eeprom_info {
+	void *data; /**< Buffer for return eeprom */
+	uint32_t offset; /**< Start eeprom address for access*/
+	uint32_t length; /**< Length of eeprom region to access */
+	uint32_t magic; /**< Device-specific key, such as device-id */
+};
+
+#endif /* _RTE_DEV_INFO_H_ */
diff --git a/lib/librte_ether/rte_eth_ctrl.h b/lib/librte_ether/rte_eth_ctrl.h
new file mode 100644
index 00000000..b8c7be90
--- /dev/null
+++ b/lib/librte_ether/rte_eth_ctrl.h
@@ -0,0 +1,846 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_ETH_CTRL_H_
+#define _RTE_ETH_CTRL_H_
+
+/**
+ * @file
+ *
+ * Ethernet device features and related data structures used
+ * by control APIs should be defined in this file.
+ *
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ * A packet can be identified by hardware as different flow types. Different
+ * NIC hardwares may support different flow types.
+ * Basically, the NIC hardware identifies the flow type as deep protocol as
+ * possible, and exclusively. For example, if a packet is identified as
+ * 'RTE_ETH_FLOW_NONFRAG_IPV4_TCP', it will not be any of other flow types,
+ * though it is an actual IPV4 packet.
+ * Note that the flow types are used to define RSS offload types in
+ * rte_ethdev.h.
+ */
+#define RTE_ETH_FLOW_UNKNOWN             0
+#define RTE_ETH_FLOW_RAW                 1
+#define RTE_ETH_FLOW_IPV4                2
+#define RTE_ETH_FLOW_FRAG_IPV4           3
+#define RTE_ETH_FLOW_NONFRAG_IPV4_TCP    4
+#define RTE_ETH_FLOW_NONFRAG_IPV4_UDP    5
+#define RTE_ETH_FLOW_NONFRAG_IPV4_SCTP   6
+#define RTE_ETH_FLOW_NONFRAG_IPV4_OTHER  7
+#define RTE_ETH_FLOW_IPV6                8
+#define RTE_ETH_FLOW_FRAG_IPV6           9
+#define RTE_ETH_FLOW_NONFRAG_IPV6_TCP   10
+#define RTE_ETH_FLOW_NONFRAG_IPV6_UDP   11
+#define RTE_ETH_FLOW_NONFRAG_IPV6_SCTP  12
+#define RTE_ETH_FLOW_NONFRAG_IPV6_OTHER 13
+#define RTE_ETH_FLOW_L2_PAYLOAD         14
+#define RTE_ETH_FLOW_IPV6_EX            15
+#define RTE_ETH_FLOW_IPV6_TCP_EX        16
+#define RTE_ETH_FLOW_IPV6_UDP_EX        17
+#define RTE_ETH_FLOW_MAX                18
+
+/**
+ * Feature filter types
+ */
+enum rte_filter_type {
+	RTE_ETH_FILTER_NONE = 0,
+	RTE_ETH_FILTER_MACVLAN,
+	RTE_ETH_FILTER_ETHERTYPE,
+	RTE_ETH_FILTER_FLEXIBLE,
+	RTE_ETH_FILTER_SYN,
+	RTE_ETH_FILTER_NTUPLE,
+	RTE_ETH_FILTER_TUNNEL,
+	RTE_ETH_FILTER_FDIR,
+	RTE_ETH_FILTER_HASH,
+	RTE_ETH_FILTER_L2_TUNNEL,
+	RTE_ETH_FILTER_MAX
+};
+
+/**
+ * Generic operations on filters
+ */
+enum rte_filter_op {
+	/** used to check whether the type filter is supported */
+	RTE_ETH_FILTER_NOP = 0,
+	RTE_ETH_FILTER_ADD,      /**< add filter entry */
+	RTE_ETH_FILTER_UPDATE,   /**< update filter entry */
+	RTE_ETH_FILTER_DELETE,   /**< delete filter entry */
+	RTE_ETH_FILTER_FLUSH,    /**< flush all entries */
+	RTE_ETH_FILTER_GET,      /**< get filter entry */
+	RTE_ETH_FILTER_SET,      /**< configurations */
+	RTE_ETH_FILTER_INFO,     /**< retrieve information */
+	RTE_ETH_FILTER_STATS,    /**< retrieve statistics */
+	RTE_ETH_FILTER_OP_MAX
+};
+
+/**
+ * MAC filter type
+ */
+enum rte_mac_filter_type {
+	RTE_MAC_PERFECT_MATCH = 1, /**< exact match of MAC addr. */
+	RTE_MACVLAN_PERFECT_MATCH, /**< exact match of MAC addr and VLAN ID. */
+	RTE_MAC_HASH_MATCH, /**< hash match of MAC addr. */
+	/** hash match of MAC addr and exact match of VLAN ID. */
+	RTE_MACVLAN_HASH_MATCH,
+};
+
+/**
+ * MAC filter info
+ */
+struct rte_eth_mac_filter {
+	uint8_t is_vf; /**< 1 for VF, 0 for port dev */
+	uint16_t dst_id; /**< VF ID, available when is_vf is 1*/
+	enum rte_mac_filter_type filter_type; /**< MAC filter type */
+	struct ether_addr mac_addr;
+};
+
+/**
+ * Define all structures for Ethertype Filter type.
+ */
+
+#define RTE_ETHTYPE_FLAGS_MAC    0x0001 /**< If set, compare mac */
+#define RTE_ETHTYPE_FLAGS_DROP   0x0002 /**< If set, drop packet when match */
+
+/**
+ * A structure used to define the ethertype filter entry
+ * to support RTE_ETH_FILTER_ETHERTYPE with RTE_ETH_FILTER_ADD,
+ * RTE_ETH_FILTER_DELETE and RTE_ETH_FILTER_GET operations.
+ */
+struct rte_eth_ethertype_filter {
+	struct ether_addr mac_addr;   /**< Mac address to match. */
+	uint16_t ether_type;          /**< Ether type to match */
+	uint16_t flags;               /**< Flags from RTE_ETHTYPE_FLAGS_* */
+	uint16_t queue;               /**< Queue assigned to when match*/
+};
+
+#define RTE_FLEX_FILTER_MAXLEN	128	/**< bytes to use in flex filter. */
+#define RTE_FLEX_FILTER_MASK_SIZE	\
+	(RTE_ALIGN(RTE_FLEX_FILTER_MAXLEN, CHAR_BIT) / CHAR_BIT)
+					/**< mask bytes in flex filter. */
+
+/**
+ *  A structure used to define the flex filter entry
+ *  to support RTE_ETH_FILTER_FLEXIBLE with RTE_ETH_FILTER_ADD,
+ *  RTE_ETH_FILTER_DELETE and RTE_ETH_FILTER_GET operations.
+ */
+struct rte_eth_flex_filter {
+	uint16_t len;
+	uint8_t bytes[RTE_FLEX_FILTER_MAXLEN];  /**< flex bytes in big endian.*/
+	uint8_t mask[RTE_FLEX_FILTER_MASK_SIZE];    /**< if mask bit is 1b, do
+					not compare corresponding byte. */
+	uint8_t priority;
+	uint16_t queue;       /**< Queue assigned to when match. */
+};
+
+/**
+ * A structure used to define the TCP syn filter entry
+ * to support RTE_ETH_FILTER_SYN with RTE_ETH_FILTER_ADD,
+ * RTE_ETH_FILTER_DELETE and RTE_ETH_FILTER_GET operations.
+ */
+struct rte_eth_syn_filter {
+	uint8_t hig_pri;     /**< 1 - higher priority than other filters,
+				  0 - lower priority. */
+	uint16_t queue;      /**< Queue assigned to when match */
+};
+
+/**
+ * Define all structures for ntuple Filter type.
+ */
+
+#define RTE_NTUPLE_FLAGS_DST_IP    0x0001 /**< If set, dst_ip is part of ntuple */
+#define RTE_NTUPLE_FLAGS_SRC_IP    0x0002 /**< If set, src_ip is part of ntuple */
+#define RTE_NTUPLE_FLAGS_DST_PORT  0x0004 /**< If set, dst_port is part of ntuple */
+#define RTE_NTUPLE_FLAGS_SRC_PORT  0x0008 /**< If set, src_port is part of ntuple */
+#define RTE_NTUPLE_FLAGS_PROTO     0x0010 /**< If set, protocol is part of ntuple */
+#define RTE_NTUPLE_FLAGS_TCP_FLAG  0x0020 /**< If set, tcp flag is involved */
+
+#define RTE_5TUPLE_FLAGS ( \
+		RTE_NTUPLE_FLAGS_DST_IP | \
+		RTE_NTUPLE_FLAGS_SRC_IP | \
+		RTE_NTUPLE_FLAGS_DST_PORT | \
+		RTE_NTUPLE_FLAGS_SRC_PORT | \
+		RTE_NTUPLE_FLAGS_PROTO)
+
+#define RTE_2TUPLE_FLAGS ( \
+		RTE_NTUPLE_FLAGS_DST_PORT | \
+		RTE_NTUPLE_FLAGS_PROTO)
+
+#define TCP_URG_FLAG 0x20
+#define TCP_ACK_FLAG 0x10
+#define TCP_PSH_FLAG 0x08
+#define TCP_RST_FLAG 0x04
+#define TCP_SYN_FLAG 0x02
+#define TCP_FIN_FLAG 0x01
+#define TCP_FLAG_ALL 0x3F
+
+/**
+ * A structure used to define the ntuple filter entry
+ * to support RTE_ETH_FILTER_NTUPLE with RTE_ETH_FILTER_ADD,
+ * RTE_ETH_FILTER_DELETE and RTE_ETH_FILTER_GET operations.
+ */
+struct rte_eth_ntuple_filter {
+	uint16_t flags;          /**< Flags from RTE_NTUPLE_FLAGS_* */
+	uint32_t dst_ip;         /**< Destination IP address in big endian. */
+	uint32_t dst_ip_mask;    /**< Mask of destination IP address. */
+	uint32_t src_ip;         /**< Source IP address in big endian. */
+	uint32_t src_ip_mask;    /**< Mask of destination IP address. */
+	uint16_t dst_port;       /**< Destination port in big endian. */
+	uint16_t dst_port_mask;  /**< Mask of destination port. */
+	uint16_t src_port;       /**< Source Port in big endian. */
+	uint16_t src_port_mask;  /**< Mask of source port. */
+	uint8_t proto;           /**< L4 protocol. */
+	uint8_t proto_mask;      /**< Mask of L4 protocol. */
+	/** tcp_flags only meaningful when the proto is TCP.
+	    The packet matched above ntuple fields and contain
+	    any set bit in tcp_flags will hit this filter. */
+	uint8_t tcp_flags;
+	uint16_t priority;       /**< seven levels (001b-111b), 111b is highest,
+				      used when more than one filter matches. */
+	uint16_t queue;          /**< Queue assigned to when match*/
+};
+
+/**
+ * Tunneled type.
+ */
+enum rte_eth_tunnel_type {
+	RTE_TUNNEL_TYPE_NONE = 0,
+	RTE_TUNNEL_TYPE_VXLAN,
+	RTE_TUNNEL_TYPE_GENEVE,
+	RTE_TUNNEL_TYPE_TEREDO,
+	RTE_TUNNEL_TYPE_NVGRE,
+	RTE_TUNNEL_TYPE_IP_IN_GRE,
+	RTE_L2_TUNNEL_TYPE_E_TAG,
+	RTE_TUNNEL_TYPE_MAX,
+};
+
+/**
+ * filter type of tunneling packet
+ */
+#define ETH_TUNNEL_FILTER_OMAC  0x01 /**< filter by outer MAC addr */
+#define ETH_TUNNEL_FILTER_OIP   0x02 /**< filter by outer IP Addr */
+#define ETH_TUNNEL_FILTER_TENID 0x04 /**< filter by tenant ID */
+#define ETH_TUNNEL_FILTER_IMAC  0x08 /**< filter by inner MAC addr */
+#define ETH_TUNNEL_FILTER_IVLAN 0x10 /**< filter by inner VLAN ID */
+#define ETH_TUNNEL_FILTER_IIP   0x20 /**< filter by inner IP addr */
+
+#define RTE_TUNNEL_FILTER_IMAC_IVLAN (ETH_TUNNEL_FILTER_IMAC | \
+					ETH_TUNNEL_FILTER_IVLAN)
+#define RTE_TUNNEL_FILTER_IMAC_IVLAN_TENID (ETH_TUNNEL_FILTER_IMAC | \
+					ETH_TUNNEL_FILTER_IVLAN | \
+					ETH_TUNNEL_FILTER_TENID)
+#define RTE_TUNNEL_FILTER_IMAC_TENID (ETH_TUNNEL_FILTER_IMAC | \
+					ETH_TUNNEL_FILTER_TENID)
+#define RTE_TUNNEL_FILTER_OMAC_TENID_IMAC (ETH_TUNNEL_FILTER_OMAC | \
+					ETH_TUNNEL_FILTER_TENID | \
+					ETH_TUNNEL_FILTER_IMAC)
+
+/**
+ *  Select IPv4 or IPv6 for tunnel filters.
+ */
+enum rte_tunnel_iptype {
+	RTE_TUNNEL_IPTYPE_IPV4 = 0, /**< IPv4. */
+	RTE_TUNNEL_IPTYPE_IPV6,     /**< IPv6. */
+};
+
+/**
+ * Tunneling Packet filter configuration.
+ */
+struct rte_eth_tunnel_filter_conf {
+	struct ether_addr outer_mac;    /**< Outer MAC address to match. */
+	struct ether_addr inner_mac;    /**< Inner MAC address to match. */
+	uint16_t inner_vlan;            /**< Inner VLAN to match. */
+	enum rte_tunnel_iptype ip_type; /**< IP address type. */
+	/** Outer destination IP address to match if ETH_TUNNEL_FILTER_OIP
+	    is set in filter_type, or inner destination IP address to match
+	    if ETH_TUNNEL_FILTER_IIP is set in filter_type . */
+	union {
+		uint32_t ipv4_addr;     /**< IPv4 address in big endian. */
+		uint32_t ipv6_addr[4];  /**< IPv6 address in big endian. */
+	} ip_addr;
+	/** Flags from ETH_TUNNEL_FILTER_XX - see above. */
+	uint16_t filter_type;
+	enum rte_eth_tunnel_type tunnel_type; /**< Tunnel Type. */
+	uint32_t tenant_id;     /**< Tenant ID to match. VNI, GRE key... */
+	uint16_t queue_id;      /**< Queue assigned to if match. */
+};
+
+/**
+ * Global eth device configuration type.
+ */
+enum rte_eth_global_cfg_type {
+	RTE_ETH_GLOBAL_CFG_TYPE_UNKNOWN = 0,
+	RTE_ETH_GLOBAL_CFG_TYPE_GRE_KEY_LEN,
+	RTE_ETH_GLOBAL_CFG_TYPE_MAX,
+};
+
+/**
+ * Global eth device configuration.
+ */
+struct rte_eth_global_cfg {
+	enum rte_eth_global_cfg_type cfg_type; /**< Global config type. */
+	union {
+		uint8_t gre_key_len; /**< Valid GRE key length in byte. */
+		uint64_t reserved; /**< Reserve space for future use. */
+	} cfg;
+};
+
+#define RTE_ETH_FDIR_MAX_FLEXLEN 16  /**< Max length of flexbytes. */
+#define RTE_ETH_INSET_SIZE_MAX   128 /**< Max length of input set. */
+
+/**
+ * Input set fields for Flow Director and Hash filters
+ */
+enum rte_eth_input_set_field {
+	RTE_ETH_INPUT_SET_UNKNOWN = 0,
+
+	/* L2 */
+	RTE_ETH_INPUT_SET_L2_SRC_MAC = 1,
+	RTE_ETH_INPUT_SET_L2_DST_MAC,
+	RTE_ETH_INPUT_SET_L2_OUTER_VLAN,
+	RTE_ETH_INPUT_SET_L2_INNER_VLAN,
+	RTE_ETH_INPUT_SET_L2_ETHERTYPE,
+
+	/* L3 */
+	RTE_ETH_INPUT_SET_L3_SRC_IP4 = 129,
+	RTE_ETH_INPUT_SET_L3_DST_IP4,
+	RTE_ETH_INPUT_SET_L3_SRC_IP6,
+	RTE_ETH_INPUT_SET_L3_DST_IP6,
+	RTE_ETH_INPUT_SET_L3_IP4_TOS,
+	RTE_ETH_INPUT_SET_L3_IP4_PROTO,
+	RTE_ETH_INPUT_SET_L3_IP6_TC,
+	RTE_ETH_INPUT_SET_L3_IP6_NEXT_HEADER,
+	RTE_ETH_INPUT_SET_L3_IP4_TTL,
+	RTE_ETH_INPUT_SET_L3_IP6_HOP_LIMITS,
+
+	/* L4 */
+	RTE_ETH_INPUT_SET_L4_UDP_SRC_PORT = 257,
+	RTE_ETH_INPUT_SET_L4_UDP_DST_PORT,
+	RTE_ETH_INPUT_SET_L4_TCP_SRC_PORT,
+	RTE_ETH_INPUT_SET_L4_TCP_DST_PORT,
+	RTE_ETH_INPUT_SET_L4_SCTP_SRC_PORT,
+	RTE_ETH_INPUT_SET_L4_SCTP_DST_PORT,
+	RTE_ETH_INPUT_SET_L4_SCTP_VERIFICATION_TAG,
+
+	/* Tunnel */
+	RTE_ETH_INPUT_SET_TUNNEL_L2_INNER_DST_MAC = 385,
+	RTE_ETH_INPUT_SET_TUNNEL_L2_INNER_SRC_MAC,
+	RTE_ETH_INPUT_SET_TUNNEL_L2_INNER_VLAN,
+	RTE_ETH_INPUT_SET_TUNNEL_L4_UDP_KEY,
+	RTE_ETH_INPUT_SET_TUNNEL_GRE_KEY,
+
+	/* Flexible Payload */
+	RTE_ETH_INPUT_SET_FLEX_PAYLOAD_1ST_WORD = 641,
+	RTE_ETH_INPUT_SET_FLEX_PAYLOAD_2ND_WORD,
+	RTE_ETH_INPUT_SET_FLEX_PAYLOAD_3RD_WORD,
+	RTE_ETH_INPUT_SET_FLEX_PAYLOAD_4TH_WORD,
+	RTE_ETH_INPUT_SET_FLEX_PAYLOAD_5TH_WORD,
+	RTE_ETH_INPUT_SET_FLEX_PAYLOAD_6TH_WORD,
+	RTE_ETH_INPUT_SET_FLEX_PAYLOAD_7TH_WORD,
+	RTE_ETH_INPUT_SET_FLEX_PAYLOAD_8TH_WORD,
+
+	RTE_ETH_INPUT_SET_DEFAULT = 65533,
+	RTE_ETH_INPUT_SET_NONE = 65534,
+	RTE_ETH_INPUT_SET_MAX = 65535,
+};
+
+/**
+ * Filters input set operations
+ */
+enum rte_filter_input_set_op {
+	RTE_ETH_INPUT_SET_OP_UNKNOWN,
+	RTE_ETH_INPUT_SET_SELECT, /**< select input set */
+	RTE_ETH_INPUT_SET_ADD,    /**< add input set entry */
+	RTE_ETH_INPUT_SET_OP_MAX
+};
+
+
+/**
+ * A structure used to define the input set configuration for
+ * flow director and hash filters
+ */
+struct rte_eth_input_set_conf {
+	uint16_t flow_type;
+	uint16_t inset_size;
+	enum rte_eth_input_set_field field[RTE_ETH_INSET_SIZE_MAX];
+	enum rte_filter_input_set_op op;
+};
+
+/**
+ * A structure used to define the input for L2 flow
+ */
+struct rte_eth_l2_flow {
+	uint16_t ether_type;          /**< Ether type in big endian */
+};
+
+/**
+ * A structure used to define the input for IPV4 flow
+ */
+struct rte_eth_ipv4_flow {
+	uint32_t src_ip;      /**< IPv4 source address in big endian. */
+	uint32_t dst_ip;      /**< IPv4 destination address in big endian. */
+	uint8_t  tos;         /**< Type of service to match. */
+	uint8_t  ttl;         /**< Time to live to match. */
+	uint8_t  proto;       /**< Protocol, next header in big endian. */
+};
+
+/**
+ * A structure used to define the input for IPV4 UDP flow
+ */
+struct rte_eth_udpv4_flow {
+	struct rte_eth_ipv4_flow ip; /**< IPv4 fields to match. */
+	uint16_t src_port;           /**< UDP source port in big endian. */
+	uint16_t dst_port;           /**< UDP destination port in big endian. */
+};
+
+/**
+ * A structure used to define the input for IPV4 TCP flow
+ */
+struct rte_eth_tcpv4_flow {
+	struct rte_eth_ipv4_flow ip; /**< IPv4 fields to match. */
+	uint16_t src_port;           /**< TCP source port in big endian. */
+	uint16_t dst_port;           /**< TCP destination port in big endian. */
+};
+
+/**
+ * A structure used to define the input for IPV4 SCTP flow
+ */
+struct rte_eth_sctpv4_flow {
+	struct rte_eth_ipv4_flow ip; /**< IPv4 fields to match. */
+	uint16_t src_port;           /**< SCTP source port in big endian. */
+	uint16_t dst_port;           /**< SCTP destination port in big endian. */
+	uint32_t verify_tag;         /**< Verify tag in big endian */
+};
+
+/**
+ * A structure used to define the input for IPV6 flow
+ */
+struct rte_eth_ipv6_flow {
+	uint32_t src_ip[4];      /**< IPv6 source address in big endian. */
+	uint32_t dst_ip[4];      /**< IPv6 destination address in big endian. */
+	uint8_t  tc;             /**< Traffic class to match. */
+	uint8_t  proto;          /**< Protocol, next header to match. */
+	uint8_t  hop_limits;     /**< Hop limits to match. */
+};
+
+/**
+ * A structure used to define the input for IPV6 UDP flow
+ */
+struct rte_eth_udpv6_flow {
+	struct rte_eth_ipv6_flow ip; /**< IPv6 fields to match. */
+	uint16_t src_port;           /**< UDP source port in big endian. */
+	uint16_t dst_port;           /**< UDP destination port in big endian. */
+};
+
+/**
+ * A structure used to define the input for IPV6 TCP flow
+ */
+struct rte_eth_tcpv6_flow {
+	struct rte_eth_ipv6_flow ip; /**< IPv6 fields to match. */
+	uint16_t src_port;           /**< TCP source port to in big endian. */
+	uint16_t dst_port;           /**< TCP destination port in big endian. */
+};
+
+/**
+ * A structure used to define the input for IPV6 SCTP flow
+ */
+struct rte_eth_sctpv6_flow {
+	struct rte_eth_ipv6_flow ip; /**< IPv6 fields to match. */
+	uint16_t src_port;           /**< SCTP source port in big endian. */
+	uint16_t dst_port;           /**< SCTP destination port in big endian. */
+	uint32_t verify_tag;         /**< Verify tag in big endian. */
+};
+
+/**
+ * A structure used to define the input for MAC VLAN flow
+ */
+struct rte_eth_mac_vlan_flow {
+	struct ether_addr mac_addr;  /**< Mac address to match. */
+};
+
+/**
+ * Tunnel type for flow director.
+ */
+enum rte_eth_fdir_tunnel_type {
+	RTE_FDIR_TUNNEL_TYPE_UNKNOWN = 0,
+	RTE_FDIR_TUNNEL_TYPE_NVGRE,
+	RTE_FDIR_TUNNEL_TYPE_VXLAN,
+};
+
+/**
+ * A structure used to define the input for tunnel flow, now it's VxLAN or
+ * NVGRE
+ */
+struct rte_eth_tunnel_flow {
+	enum rte_eth_fdir_tunnel_type tunnel_type; /**< Tunnel type to match. */
+	/** Tunnel ID to match. TNI, VNI... in big endian. */
+	uint32_t tunnel_id;
+	struct ether_addr mac_addr;                /**< Mac address to match. */
+};
+
+/**
+ * An union contains the inputs for all types of flow
+ * Items in flows need to be in big endian
+ */
+union rte_eth_fdir_flow {
+	struct rte_eth_l2_flow     l2_flow;
+	struct rte_eth_udpv4_flow  udp4_flow;
+	struct rte_eth_tcpv4_flow  tcp4_flow;
+	struct rte_eth_sctpv4_flow sctp4_flow;
+	struct rte_eth_ipv4_flow   ip4_flow;
+	struct rte_eth_udpv6_flow  udp6_flow;
+	struct rte_eth_tcpv6_flow  tcp6_flow;
+	struct rte_eth_sctpv6_flow sctp6_flow;
+	struct rte_eth_ipv6_flow   ipv6_flow;
+	struct rte_eth_mac_vlan_flow mac_vlan_flow;
+	struct rte_eth_tunnel_flow   tunnel_flow;
+};
+
+/**
+ * A structure used to contain extend input of flow
+ */
+struct rte_eth_fdir_flow_ext {
+	uint16_t vlan_tci;
+	uint8_t flexbytes[RTE_ETH_FDIR_MAX_FLEXLEN];
+	/**< It is filled by the flexible payload to match. */
+	uint8_t is_vf;   /**< 1 for VF, 0 for port dev */
+	uint16_t dst_id; /**< VF ID, available when is_vf is 1*/
+};
+
+/**
+ * A structure used to define the input for a flow director filter entry
+ */
+struct rte_eth_fdir_input {
+	uint16_t flow_type;
+	union rte_eth_fdir_flow flow;
+	/**< Flow fields to match, dependent on flow_type */
+	struct rte_eth_fdir_flow_ext flow_ext;
+	/**< Additional fields to match */
+};
+
+/**
+ * Behavior will be taken if FDIR match
+ */
+enum rte_eth_fdir_behavior {
+	RTE_ETH_FDIR_ACCEPT = 0,
+	RTE_ETH_FDIR_REJECT,
+	RTE_ETH_FDIR_PASSTHRU,
+};
+
+/**
+ * Flow director report status
+ * It defines what will be reported if FDIR entry is matched.
+ */
+enum rte_eth_fdir_status {
+	RTE_ETH_FDIR_NO_REPORT_STATUS = 0, /**< Report nothing. */
+	RTE_ETH_FDIR_REPORT_ID,            /**< Only report FD ID. */
+	RTE_ETH_FDIR_REPORT_ID_FLEX_4,     /**< Report FD ID and 4 flex bytes. */
+	RTE_ETH_FDIR_REPORT_FLEX_8,        /**< Report 8 flex bytes. */
+};
+
+/**
+ * A structure used to define an action when match FDIR packet filter.
+ */
+struct rte_eth_fdir_action {
+	uint16_t rx_queue;        /**< Queue assigned to if FDIR match. */
+	enum rte_eth_fdir_behavior behavior;     /**< Behavior will be taken */
+	enum rte_eth_fdir_status report_status;  /**< Status report option */
+	uint8_t flex_off;
+	/**< If report_status is RTE_ETH_FDIR_REPORT_ID_FLEX_4 or
+	     RTE_ETH_FDIR_REPORT_FLEX_8, flex_off specifies where the reported
+	     flex bytes start from in flexible payload. */
+};
+
+/**
+ * A structure used to define the flow director filter entry by filter_ctrl API
+ * It supports RTE_ETH_FILTER_FDIR with RTE_ETH_FILTER_ADD and
+ * RTE_ETH_FILTER_DELETE operations.
+ */
+struct rte_eth_fdir_filter {
+	uint32_t soft_id;
+	/**< ID, an unique value is required when deal with FDIR entry */
+	struct rte_eth_fdir_input input;    /**< Input set */
+	struct rte_eth_fdir_action action;  /**< Action taken when match */
+};
+
+/**
+ *  A structure used to configure FDIR masks that are used by the device
+ *  to match the various fields of RX packet headers.
+ */
+struct rte_eth_fdir_masks {
+	uint16_t vlan_tci_mask;   /**< Bit mask for vlan_tci in big endian */
+	/** Bit mask for ipv4 flow in big endian. */
+	struct rte_eth_ipv4_flow   ipv4_mask;
+	/** Bit maks for ipv6 flow in big endian. */
+	struct rte_eth_ipv6_flow   ipv6_mask;
+	/** Bit mask for L4 source port in big endian. */
+	uint16_t src_port_mask;
+	/** Bit mask for L4 destination port in big endian. */
+	uint16_t dst_port_mask;
+	/** 6 bit mask for proper 6 bytes of Mac address, bit 0 matches the
+	    first byte on the wire */
+	uint8_t mac_addr_byte_mask;
+	/** Bit mask for tunnel ID in big endian. */
+	uint32_t tunnel_id_mask;
+	uint8_t tunnel_type_mask; /**< 1 - Match tunnel type,
+				       0 - Ignore tunnel type. */
+};
+
+/**
+ * Payload type
+ */
+enum rte_eth_payload_type {
+	RTE_ETH_PAYLOAD_UNKNOWN = 0,
+	RTE_ETH_RAW_PAYLOAD,
+	RTE_ETH_L2_PAYLOAD,
+	RTE_ETH_L3_PAYLOAD,
+	RTE_ETH_L4_PAYLOAD,
+	RTE_ETH_PAYLOAD_MAX = 8,
+};
+
+/**
+ * A structure used to select bytes extracted from the protocol layers to
+ * flexible payload for filter
+ */
+struct rte_eth_flex_payload_cfg {
+	enum rte_eth_payload_type type;  /**< Payload type */
+	uint16_t src_offset[RTE_ETH_FDIR_MAX_FLEXLEN];
+	/**< Offset in bytes from the beginning of packet's payload
+	     src_offset[i] indicates the flexbyte i's offset in original
+	     packet payload. This value should be less than
+	     flex_payload_limit in struct rte_eth_fdir_info.*/
+};
+
+/**
+ * A structure used to define FDIR masks for flexible payload
+ * for each flow type
+ */
+struct rte_eth_fdir_flex_mask {
+	uint16_t flow_type;
+	uint8_t mask[RTE_ETH_FDIR_MAX_FLEXLEN];
+	/**< Mask for the whole flexible payload */
+};
+
+/**
+ * A structure used to define all flexible payload related setting
+ * include flex payload and flex mask
+ */
+struct rte_eth_fdir_flex_conf {
+	uint16_t nb_payloads;  /**< The number of following payload cfg */
+	uint16_t nb_flexmasks; /**< The number of following mask */
+	struct rte_eth_flex_payload_cfg flex_set[RTE_ETH_PAYLOAD_MAX];
+	/**< Flex payload configuration for each payload type */
+	struct rte_eth_fdir_flex_mask flex_mask[RTE_ETH_FLOW_MAX];
+	/**< Flex mask configuration for each flow type */
+};
+
+/**
+ *  Flow Director setting modes: none, signature or perfect.
+ */
+enum rte_fdir_mode {
+	RTE_FDIR_MODE_NONE      = 0, /**< Disable FDIR support. */
+	RTE_FDIR_MODE_SIGNATURE,     /**< Enable FDIR signature filter mode. */
+	RTE_FDIR_MODE_PERFECT,       /**< Enable FDIR perfect filter mode. */
+	RTE_FDIR_MODE_PERFECT_MAC_VLAN, /**< Enable FDIR filter mode - MAC VLAN. */
+	RTE_FDIR_MODE_PERFECT_TUNNEL,   /**< Enable FDIR filter mode - tunnel. */
+};
+
+#define UINT32_BIT (CHAR_BIT * sizeof(uint32_t))
+#define RTE_FLOW_MASK_ARRAY_SIZE \
+	(RTE_ALIGN(RTE_ETH_FLOW_MAX, UINT32_BIT)/UINT32_BIT)
+
+/**
+ * A structure used to get the information of flow director filter.
+ * It supports RTE_ETH_FILTER_FDIR with RTE_ETH_FILTER_INFO operation.
+ * It includes the mode, flexible payload configuration information,
+ * capabilities and supported flow types, flexible payload characters.
+ * It can be gotten to help taking specific configurations per device.
+ */
+struct rte_eth_fdir_info {
+	enum rte_fdir_mode mode; /**< Flow director mode */
+	struct rte_eth_fdir_masks mask;
+	/** Flex payload configuration information */
+	struct rte_eth_fdir_flex_conf flex_conf;
+	uint32_t guarant_spc; /**< Guaranteed spaces.*/
+	uint32_t best_spc; /**< Best effort spaces.*/
+	/** Bit mask for every supported flow type. */
+	uint32_t flow_types_mask[RTE_FLOW_MASK_ARRAY_SIZE];
+	uint32_t max_flexpayload; /**< Total flex payload in bytes. */
+	/** Flexible payload unit in bytes. Size and alignments of all flex
+	    payload segments should be multiplies of this value. */
+	uint32_t flex_payload_unit;
+	/** Max number of flexible payload continuous segments.
+	    Each segment should be a multiple of flex_payload_unit.*/
+	uint32_t max_flex_payload_segment_num;
+	/** Maximum src_offset in bytes allowed. It indicates that
+	    src_offset[i] in struct rte_eth_flex_payload_cfg should be less
+	    than this value. */
+	uint16_t flex_payload_limit;
+	/** Flex bitmask unit in bytes. Size of flex bitmasks should be a
+	    multiply of this value. */
+	uint32_t flex_bitmask_unit;
+	/** Max supported size of flex bitmasks in flex_bitmask_unit */
+	uint32_t max_flex_bitmask_num;
+};
+
+/**
+ * A structure used to define the statistics of flow director.
+ * It supports RTE_ETH_FILTER_FDIR with RTE_ETH_FILTER_STATS operation.
+ */
+struct rte_eth_fdir_stats {
+	uint32_t collision;    /**< Number of filters with collision. */
+	uint32_t free;         /**< Number of free filters. */
+	uint32_t maxhash;
+	/**< The lookup hash value of the added filter that updated the value
+	   of the MAXLEN field */
+	uint32_t maxlen;       /**< Longest linked list of filters. */
+	uint64_t add;          /**< Number of added filters. */
+	uint64_t remove;       /**< Number of removed filters. */
+	uint64_t f_add;        /**< Number of failed added filters. */
+	uint64_t f_remove;     /**< Number of failed removed filters. */
+	uint32_t guarant_cnt;  /**< Number of filters in guaranteed spaces. */
+	uint32_t best_cnt;     /**< Number of filters in best effort spaces. */
+};
+
+/**
+ * Flow Director filter information types.
+ */
+enum rte_eth_fdir_filter_info_type {
+	RTE_ETH_FDIR_FILTER_INFO_TYPE_UNKNOWN = 0,
+	/** Flow Director filter input set configuration */
+	RTE_ETH_FDIR_FILTER_INPUT_SET_SELECT,
+	RTE_ETH_FDIR_FILTER_INFO_TYPE_MAX,
+};
+
+/**
+ * A structure used to set FDIR filter information, to support filter type
+ * of 'RTE_ETH_FILTER_FDIR' RTE_ETH_FDIR_FILTER_INPUT_SET_SELECT operation.
+ */
+struct rte_eth_fdir_filter_info {
+	enum rte_eth_fdir_filter_info_type info_type; /**< Information type */
+	/** Details of fdir filter information */
+	union {
+		/** Flow Director input set configuration per port */
+		struct rte_eth_input_set_conf input_set_conf;
+	} info;
+};
+
+/**
+ * Hash filter information types.
+ * - RTE_ETH_HASH_FILTER_SYM_HASH_ENA_PER_PORT is for getting/setting the
+ *   information/configuration of 'symmetric hash enable' per port.
+ * - RTE_ETH_HASH_FILTER_GLOBAL_CONFIG is for getting/setting the global
+ *   configurations of hash filters. Those global configurations are valid
+ *   for all ports of the same NIC.
+ * - RTE_ETH_HASH_FILTER_INPUT_SET_SELECT is for setting the global
+ *   hash input set fields
+ */
+enum rte_eth_hash_filter_info_type {
+	RTE_ETH_HASH_FILTER_INFO_TYPE_UNKNOWN = 0,
+	/** Symmetric hash enable per port */
+	RTE_ETH_HASH_FILTER_SYM_HASH_ENA_PER_PORT,
+	/** Configure globally for hash filter */
+	RTE_ETH_HASH_FILTER_GLOBAL_CONFIG,
+	/** Global Hash filter input set configuration */
+	RTE_ETH_HASH_FILTER_INPUT_SET_SELECT,
+	RTE_ETH_HASH_FILTER_INFO_TYPE_MAX,
+};
+
+/**
+ * Hash function types.
+ */
+enum rte_eth_hash_function {
+	RTE_ETH_HASH_FUNCTION_DEFAULT = 0,
+	RTE_ETH_HASH_FUNCTION_TOEPLITZ, /**< Toeplitz */
+	RTE_ETH_HASH_FUNCTION_SIMPLE_XOR, /**< Simple XOR */
+	RTE_ETH_HASH_FUNCTION_MAX,
+};
+
+#define RTE_SYM_HASH_MASK_ARRAY_SIZE \
+	(RTE_ALIGN(RTE_ETH_FLOW_MAX, UINT32_BIT)/UINT32_BIT)
+/**
+ * A structure used to set or get global hash function configurations which
+ * include symmetric hash enable per flow type and hash function type.
+ * Each bit in sym_hash_enable_mask[] indicates if the symmetric hash of the
+ * corresponding flow type is enabled or not.
+ * Each bit in valid_bit_mask[] indicates if the corresponding bit in
+ * sym_hash_enable_mask[] is valid or not. For the configurations gotten, it
+ * also means if the flow type is supported by hardware or not.
+ */
+struct rte_eth_hash_global_conf {
+	enum rte_eth_hash_function hash_func; /**< Hash function type */
+	/** Bit mask for symmetric hash enable per flow type */
+	uint32_t sym_hash_enable_mask[RTE_SYM_HASH_MASK_ARRAY_SIZE];
+	/** Bit mask indicates if the corresponding bit is valid */
+	uint32_t valid_bit_mask[RTE_SYM_HASH_MASK_ARRAY_SIZE];
+};
+
+/**
+ * A structure used to set or get hash filter information, to support filter
+ * type of 'RTE_ETH_FILTER_HASH' and its operations.
+ */
+struct rte_eth_hash_filter_info {
+	enum rte_eth_hash_filter_info_type info_type; /**< Information type */
+	/** Details of hash filter information */
+	union {
+		/** For RTE_ETH_HASH_FILTER_SYM_HASH_ENA_PER_PORT */
+		uint8_t enable;
+		/** Global configurations of hash filter */
+		struct rte_eth_hash_global_conf global_conf;
+		/** Global configurations of hash filter input set */
+		struct rte_eth_input_set_conf input_set_conf;
+	} info;
+};
+
+/**
+ * l2 tunnel configuration.
+ */
+struct rte_eth_l2_tunnel_conf {
+	enum rte_eth_tunnel_type l2_tunnel_type;
+	uint16_t ether_type; /* ether type in l2 header */
+	uint32_t tunnel_id; /* port tag id for e-tag */
+	uint16_t vf_id; /* VF id for tag insertion */
+	uint32_t pool; /* destination pool for tag based forwarding */
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_ETH_CTRL_H_ */
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
new file mode 100644
index 00000000..a31018e8
--- /dev/null
+++ b/lib/librte_ether/rte_ethdev.c
@@ -0,0 +1,3371 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <sys/types.h>
+#include <sys/queue.h>
+#include <ctype.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <stdarg.h>
+#include <errno.h>
+#include <stdint.h>
+#include <inttypes.h>
+#include <netinet/in.h>
+
+#include <rte_byteorder.h>
+#include <rte_log.h>
+#include <rte_debug.h>
+#include <rte_interrupts.h>
+#include <rte_pci.h>
+#include <rte_memory.h>
+#include <rte_memcpy.h>
+#include <rte_memzone.h>
+#include <rte_launch.h>
+#include <rte_eal.h>
+#include <rte_per_lcore.h>
+#include <rte_lcore.h>
+#include <rte_atomic.h>
+#include <rte_branch_prediction.h>
+#include <rte_common.h>
+#include <rte_ring.h>
+#include <rte_mempool.h>
+#include <rte_malloc.h>
+#include <rte_mbuf.h>
+#include <rte_errno.h>
+#include <rte_spinlock.h>
+#include <rte_string_fns.h>
+
+#include "rte_ether.h"
+#include "rte_ethdev.h"
+
+static const char *MZ_RTE_ETH_DEV_DATA = "rte_eth_dev_data";
+struct rte_eth_dev rte_eth_devices[RTE_MAX_ETHPORTS];
+static struct rte_eth_dev_data *rte_eth_dev_data;
+static uint8_t nb_ports;
+
+/* spinlock for eth device callbacks */
+static rte_spinlock_t rte_eth_dev_cb_lock = RTE_SPINLOCK_INITIALIZER;
+
+/* store statistics names and its offset in stats structure  */
+struct rte_eth_xstats_name_off {
+	char name[RTE_ETH_XSTATS_NAME_SIZE];
+	unsigned offset;
+};
+
+static const struct rte_eth_xstats_name_off rte_stats_strings[] = {
+	{"rx_good_packets", offsetof(struct rte_eth_stats, ipackets)},
+	{"tx_good_packets", offsetof(struct rte_eth_stats, opackets)},
+	{"rx_good_bytes", offsetof(struct rte_eth_stats, ibytes)},
+	{"tx_good_bytes", offsetof(struct rte_eth_stats, obytes)},
+	{"rx_errors", offsetof(struct rte_eth_stats, ierrors)},
+	{"tx_errors", offsetof(struct rte_eth_stats, oerrors)},
+	{"rx_mbuf_allocation_errors", offsetof(struct rte_eth_stats,
+		rx_nombuf)},
+};
+
+#define RTE_NB_STATS (sizeof(rte_stats_strings) / sizeof(rte_stats_strings[0]))
+
+static const struct rte_eth_xstats_name_off rte_rxq_stats_strings[] = {
+	{"packets", offsetof(struct rte_eth_stats, q_ipackets)},
+	{"bytes", offsetof(struct rte_eth_stats, q_ibytes)},
+	{"errors", offsetof(struct rte_eth_stats, q_errors)},
+};
+
+#define RTE_NB_RXQ_STATS (sizeof(rte_rxq_stats_strings) /	\
+		sizeof(rte_rxq_stats_strings[0]))
+
+static const struct rte_eth_xstats_name_off rte_txq_stats_strings[] = {
+	{"packets", offsetof(struct rte_eth_stats, q_opackets)},
+	{"bytes", offsetof(struct rte_eth_stats, q_obytes)},
+};
+#define RTE_NB_TXQ_STATS (sizeof(rte_txq_stats_strings) /	\
+		sizeof(rte_txq_stats_strings[0]))
+
+
+/**
+ * The user application callback description.
+ *
+ * It contains callback address to be registered by user application,
+ * the pointer to the parameters for callback, and the event type.
+ */
+struct rte_eth_dev_callback {
+	TAILQ_ENTRY(rte_eth_dev_callback) next; /**< Callbacks list */
+	rte_eth_dev_cb_fn cb_fn;                /**< Callback address */
+	void *cb_arg;                           /**< Parameter for callback */
+	enum rte_eth_event_type event;          /**< Interrupt event type */
+	uint32_t active;                        /**< Callback is executing */
+};
+
+enum {
+	STAT_QMAP_TX = 0,
+	STAT_QMAP_RX
+};
+
+enum {
+	DEV_DETACHED = 0,
+	DEV_ATTACHED
+};
+
+static void
+rte_eth_dev_data_alloc(void)
+{
+	const unsigned flags = 0;
+	const struct rte_memzone *mz;
+
+	if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
+		mz = rte_memzone_reserve(MZ_RTE_ETH_DEV_DATA,
+				RTE_MAX_ETHPORTS * sizeof(*rte_eth_dev_data),
+				rte_socket_id(), flags);
+	} else
+		mz = rte_memzone_lookup(MZ_RTE_ETH_DEV_DATA);
+	if (mz == NULL)
+		rte_panic("Cannot allocate memzone for ethernet port data\n");
+
+	rte_eth_dev_data = mz->addr;
+	if (rte_eal_process_type() == RTE_PROC_PRIMARY)
+		memset(rte_eth_dev_data, 0,
+				RTE_MAX_ETHPORTS * sizeof(*rte_eth_dev_data));
+}
+
+struct rte_eth_dev *
+rte_eth_dev_allocated(const char *name)
+{
+	unsigned i;
+
+	for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
+		if ((rte_eth_devices[i].attached == DEV_ATTACHED) &&
+		    strcmp(rte_eth_devices[i].data->name, name) == 0)
+			return &rte_eth_devices[i];
+	}
+	return NULL;
+}
+
+static uint8_t
+rte_eth_dev_find_free_port(void)
+{
+	unsigned i;
+
+	for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
+		if (rte_eth_devices[i].attached == DEV_DETACHED)
+			return i;
+	}
+	return RTE_MAX_ETHPORTS;
+}
+
+struct rte_eth_dev *
+rte_eth_dev_allocate(const char *name, enum rte_eth_dev_type type)
+{
+	uint8_t port_id;
+	struct rte_eth_dev *eth_dev;
+
+	port_id = rte_eth_dev_find_free_port();
+	if (port_id == RTE_MAX_ETHPORTS) {
+		RTE_PMD_DEBUG_TRACE("Reached maximum number of Ethernet ports\n");
+		return NULL;
+	}
+
+	if (rte_eth_dev_data == NULL)
+		rte_eth_dev_data_alloc();
+
+	if (rte_eth_dev_allocated(name) != NULL) {
+		RTE_PMD_DEBUG_TRACE("Ethernet Device with name %s already allocated!\n",
+				name);
+		return NULL;
+	}
+
+	eth_dev = &rte_eth_devices[port_id];
+	eth_dev->data = &rte_eth_dev_data[port_id];
+	snprintf(eth_dev->data->name, sizeof(eth_dev->data->name), "%s", name);
+	eth_dev->data->port_id = port_id;
+	eth_dev->attached = DEV_ATTACHED;
+	eth_dev->dev_type = type;
+	nb_ports++;
+	return eth_dev;
+}
+
+static int
+rte_eth_dev_create_unique_device_name(char *name, size_t size,
+		struct rte_pci_device *pci_dev)
+{
+	int ret;
+
+	ret = snprintf(name, size, "%d:%d.%d",
+			pci_dev->addr.bus, pci_dev->addr.devid,
+			pci_dev->addr.function);
+	if (ret < 0)
+		return ret;
+	return 0;
+}
+
+int
+rte_eth_dev_release_port(struct rte_eth_dev *eth_dev)
+{
+	if (eth_dev == NULL)
+		return -EINVAL;
+
+	eth_dev->attached = DEV_DETACHED;
+	nb_ports--;
+	return 0;
+}
+
+static int
+rte_eth_dev_init(struct rte_pci_driver *pci_drv,
+		 struct rte_pci_device *pci_dev)
+{
+	struct eth_driver    *eth_drv;
+	struct rte_eth_dev *eth_dev;
+	char ethdev_name[RTE_ETH_NAME_MAX_LEN];
+
+	int diag;
+
+	eth_drv = (struct eth_driver *)pci_drv;
+
+	/* Create unique Ethernet device name using PCI address */
+	rte_eth_dev_create_unique_device_name(ethdev_name,
+			sizeof(ethdev_name), pci_dev);
+
+	eth_dev = rte_eth_dev_allocate(ethdev_name, RTE_ETH_DEV_PCI);
+	if (eth_dev == NULL)
+		return -ENOMEM;
+
+	if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
+		eth_dev->data->dev_private = rte_zmalloc("ethdev private structure",
+				  eth_drv->dev_private_size,
+				  RTE_CACHE_LINE_SIZE);
+		if (eth_dev->data->dev_private == NULL)
+			rte_panic("Cannot allocate memzone for private port data\n");
+	}
+	eth_dev->pci_dev = pci_dev;
+	eth_dev->driver = eth_drv;
+	eth_dev->data->rx_mbuf_alloc_failed = 0;
+
+	/* init user callbacks */
+	TAILQ_INIT(&(eth_dev->link_intr_cbs));
+
+	/*
+	 * Set the default MTU.
+	 */
+	eth_dev->data->mtu = ETHER_MTU;
+
+	/* Invoke PMD device initialization function */
+	diag = (*eth_drv->eth_dev_init)(eth_dev);
+	if (diag == 0)
+		return 0;
+
+	RTE_PMD_DEBUG_TRACE("driver %s: eth_dev_init(vendor_id=0x%u device_id=0x%x) failed\n",
+			pci_drv->name,
+			(unsigned) pci_dev->id.vendor_id,
+			(unsigned) pci_dev->id.device_id);
+	if (rte_eal_process_type() == RTE_PROC_PRIMARY)
+		rte_free(eth_dev->data->dev_private);
+	rte_eth_dev_release_port(eth_dev);
+	return diag;
+}
+
+static int
+rte_eth_dev_uninit(struct rte_pci_device *pci_dev)
+{
+	const struct eth_driver *eth_drv;
+	struct rte_eth_dev *eth_dev;
+	char ethdev_name[RTE_ETH_NAME_MAX_LEN];
+	int ret;
+
+	if (pci_dev == NULL)
+		return -EINVAL;
+
+	/* Create unique Ethernet device name using PCI address */
+	rte_eth_dev_create_unique_device_name(ethdev_name,
+			sizeof(ethdev_name), pci_dev);
+
+	eth_dev = rte_eth_dev_allocated(ethdev_name);
+	if (eth_dev == NULL)
+		return -ENODEV;
+
+	eth_drv = (const struct eth_driver *)pci_dev->driver;
+
+	/* Invoke PMD device uninit function */
+	if (*eth_drv->eth_dev_uninit) {
+		ret = (*eth_drv->eth_dev_uninit)(eth_dev);
+		if (ret)
+			return ret;
+	}
+
+	/* free ether device */
+	rte_eth_dev_release_port(eth_dev);
+
+	if (rte_eal_process_type() == RTE_PROC_PRIMARY)
+		rte_free(eth_dev->data->dev_private);
+
+	eth_dev->pci_dev = NULL;
+	eth_dev->driver = NULL;
+	eth_dev->data = NULL;
+
+	return 0;
+}
+
+/**
+ * Register an Ethernet [Poll Mode] driver.
+ *
+ * Function invoked by the initialization function of an Ethernet driver
+ * to simultaneously register itself as a PCI driver and as an Ethernet
+ * Poll Mode Driver.
+ * Invokes the rte_eal_pci_register() function to register the *pci_drv*
+ * structure embedded in the *eth_drv* structure, after having stored the
+ * address of the rte_eth_dev_init() function in the *devinit* field of
+ * the *pci_drv* structure.
+ * During the PCI probing phase, the rte_eth_dev_init() function is
+ * invoked for each PCI [Ethernet device] matching the embedded PCI
+ * identifiers provided by the driver.
+ */
+void
+rte_eth_driver_register(struct eth_driver *eth_drv)
+{
+	eth_drv->pci_drv.devinit = rte_eth_dev_init;
+	eth_drv->pci_drv.devuninit = rte_eth_dev_uninit;
+	rte_eal_pci_register(&eth_drv->pci_drv);
+}
+
+int
+rte_eth_dev_is_valid_port(uint8_t port_id)
+{
+	if (port_id >= RTE_MAX_ETHPORTS ||
+	    rte_eth_devices[port_id].attached != DEV_ATTACHED)
+		return 0;
+	else
+		return 1;
+}
+
+int
+rte_eth_dev_socket_id(uint8_t port_id)
+{
+	if (!rte_eth_dev_is_valid_port(port_id))
+		return -1;
+	return rte_eth_devices[port_id].data->numa_node;
+}
+
+uint8_t
+rte_eth_dev_count(void)
+{
+	return nb_ports;
+}
+
+static enum rte_eth_dev_type
+rte_eth_dev_get_device_type(uint8_t port_id)
+{
+	if (!rte_eth_dev_is_valid_port(port_id))
+		return RTE_ETH_DEV_UNKNOWN;
+	return rte_eth_devices[port_id].dev_type;
+}
+
+static int
+rte_eth_dev_get_addr_by_port(uint8_t port_id, struct rte_pci_addr *addr)
+{
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
+
+	if (addr == NULL) {
+		RTE_PMD_DEBUG_TRACE("Null pointer is specified\n");
+		return -EINVAL;
+	}
+
+	*addr = rte_eth_devices[port_id].pci_dev->addr;
+	return 0;
+}
+
+static int
+rte_eth_dev_get_name_by_port(uint8_t port_id, char *name)
+{
+	char *tmp;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
+
+	if (name == NULL) {
+		RTE_PMD_DEBUG_TRACE("Null pointer is specified\n");
+		return -EINVAL;
+	}
+
+	/* shouldn't check 'rte_eth_devices[i].data',
+	 * because it might be overwritten by VDEV PMD */
+	tmp = rte_eth_dev_data[port_id].name;
+	strcpy(name, tmp);
+	return 0;
+}
+
+static int
+rte_eth_dev_get_port_by_name(const char *name, uint8_t *port_id)
+{
+	int i;
+
+	if (name == NULL) {
+		RTE_PMD_DEBUG_TRACE("Null pointer is specified\n");
+		return -EINVAL;
+	}
+
+	*port_id = RTE_MAX_ETHPORTS;
+
+	for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
+
+		if (!strncmp(name,
+			rte_eth_dev_data[i].name, strlen(name))) {
+
+			*port_id = i;
+
+			return 0;
+		}
+	}
+	return -ENODEV;
+}
+
+static int
+rte_eth_dev_get_port_by_addr(const struct rte_pci_addr *addr, uint8_t *port_id)
+{
+	int i;
+	struct rte_pci_device *pci_dev = NULL;
+
+	if (addr == NULL) {
+		RTE_PMD_DEBUG_TRACE("Null pointer is specified\n");
+		return -EINVAL;
+	}
+
+	*port_id = RTE_MAX_ETHPORTS;
+
+	for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
+
+		pci_dev = rte_eth_devices[i].pci_dev;
+
+		if (pci_dev &&
+			!rte_eal_compare_pci_addr(&pci_dev->addr, addr)) {
+
+			*port_id = i;
+
+			return 0;
+		}
+	}
+	return -ENODEV;
+}
+
+static int
+rte_eth_dev_is_detachable(uint8_t port_id)
+{
+	uint32_t dev_flags;
+
+	if (!rte_eth_dev_is_valid_port(port_id)) {
+		RTE_PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+		return -EINVAL;
+	}
+
+	switch (rte_eth_devices[port_id].data->kdrv) {
+	case RTE_KDRV_IGB_UIO:
+	case RTE_KDRV_UIO_GENERIC:
+	case RTE_KDRV_NIC_UIO:
+	case RTE_KDRV_NONE:
+		break;
+	case RTE_KDRV_VFIO:
+	default:
+		return -ENOTSUP;
+	}
+	dev_flags = rte_eth_devices[port_id].data->dev_flags;
+	if ((dev_flags & RTE_ETH_DEV_DETACHABLE) &&
+		(!(dev_flags & RTE_ETH_DEV_BONDED_SLAVE)))
+		return 0;
+	else
+		return 1;
+}
+
+/* attach the new physical device, then store port_id of the device */
+static int
+rte_eth_dev_attach_pdev(struct rte_pci_addr *addr, uint8_t *port_id)
+{
+	/* re-construct pci_device_list */
+	if (rte_eal_pci_scan())
+		goto err;
+	/* Invoke probe func of the driver can handle the new device. */
+	if (rte_eal_pci_probe_one(addr))
+		goto err;
+
+	if (rte_eth_dev_get_port_by_addr(addr, port_id))
+		goto err;
+
+	return 0;
+err:
+	return -1;
+}
+
+/* detach the new physical device, then store pci_addr of the device */
+static int
+rte_eth_dev_detach_pdev(uint8_t port_id, struct rte_pci_addr *addr)
+{
+	struct rte_pci_addr freed_addr;
+	struct rte_pci_addr vp;
+
+	/* get pci address by port id */
+	if (rte_eth_dev_get_addr_by_port(port_id, &freed_addr))
+		goto err;
+
+	/* Zeroed pci addr means the port comes from virtual device */
+	vp.domain = vp.bus = vp.devid = vp.function = 0;
+	if (rte_eal_compare_pci_addr(&vp, &freed_addr) == 0)
+		goto err;
+
+	/* invoke devuninit func of the pci driver,
+	 * also remove the device from pci_device_list */
+	if (rte_eal_pci_detach(&freed_addr))
+		goto err;
+
+	*addr = freed_addr;
+	return 0;
+err:
+	return -1;
+}
+
+/* attach the new virtual device, then store port_id of the device */
+static int
+rte_eth_dev_attach_vdev(const char *vdevargs, uint8_t *port_id)
+{
+	char *name = NULL, *args = NULL;
+	int ret = -1;
+
+	/* parse vdevargs, then retrieve device name and args */
+	if (rte_eal_parse_devargs_str(vdevargs, &name, &args))
+		goto end;
+
+	/* walk around dev_driver_list to find the driver of the device,
+	 * then invoke probe function of the driver.
+	 * rte_eal_vdev_init() updates port_id allocated after
+	 * initialization.
+	 */
+	if (rte_eal_vdev_init(name, args))
+		goto end;
+
+	if (rte_eth_dev_get_port_by_name(name, port_id))
+		goto end;
+
+	ret = 0;
+end:
+	free(name);
+	free(args);
+
+	return ret;
+}
+
+/* detach the new virtual device, then store the name of the device */
+static int
+rte_eth_dev_detach_vdev(uint8_t port_id, char *vdevname)
+{
+	char name[RTE_ETH_NAME_MAX_LEN];
+
+	/* get device name by port id */
+	if (rte_eth_dev_get_name_by_port(port_id, name))
+		goto err;
+	/* walk around dev_driver_list to find the driver of the device,
+	 * then invoke uninit function of the driver */
+	if (rte_eal_vdev_uninit(name))
+		goto err;
+
+	strncpy(vdevname, name, sizeof(name));
+	return 0;
+err:
+	return -1;
+}
+
+/* attach the new device, then store port_id of the device */
+int
+rte_eth_dev_attach(const char *devargs, uint8_t *port_id)
+{
+	struct rte_pci_addr addr;
+	int ret = -1;
+
+	if ((devargs == NULL) || (port_id == NULL)) {
+		ret = -EINVAL;
+		goto err;
+	}
+
+	if (eal_parse_pci_DomBDF(devargs, &addr) == 0) {
+		ret = rte_eth_dev_attach_pdev(&addr, port_id);
+		if (ret < 0)
+			goto err;
+	} else {
+		ret = rte_eth_dev_attach_vdev(devargs, port_id);
+		if (ret < 0)
+			goto err;
+	}
+
+	return 0;
+err:
+	RTE_LOG(ERR, EAL, "Driver, cannot attach the device\n");
+	return ret;
+}
+
+/* detach the device, then store the name of the device */
+int
+rte_eth_dev_detach(uint8_t port_id, char *name)
+{
+	struct rte_pci_addr addr;
+	int ret = -1;
+
+	if (name == NULL) {
+		ret = -EINVAL;
+		goto err;
+	}
+
+	/* check whether the driver supports detach feature, or not */
+	if (rte_eth_dev_is_detachable(port_id))
+		goto err;
+
+	if (rte_eth_dev_get_device_type(port_id) == RTE_ETH_DEV_PCI) {
+		ret = rte_eth_dev_get_addr_by_port(port_id, &addr);
+		if (ret < 0)
+			goto err;
+
+		ret = rte_eth_dev_detach_pdev(port_id, &addr);
+		if (ret < 0)
+			goto err;
+
+		snprintf(name, RTE_ETH_NAME_MAX_LEN,
+			"%04x:%02x:%02x.%d",
+			addr.domain, addr.bus,
+			addr.devid, addr.function);
+	} else {
+		ret = rte_eth_dev_detach_vdev(port_id, name);
+		if (ret < 0)
+			goto err;
+	}
+
+	return 0;
+
+err:
+	RTE_LOG(ERR, EAL, "Driver, cannot detach the device\n");
+	return ret;
+}
+
+static int
+rte_eth_dev_rx_queue_config(struct rte_eth_dev *dev, uint16_t nb_queues)
+{
+	uint16_t old_nb_queues = dev->data->nb_rx_queues;
+	void **rxq;
+	unsigned i;
+
+	if (dev->data->rx_queues == NULL && nb_queues != 0) { /* first time configuration */
+		dev->data->rx_queues = rte_zmalloc("ethdev->rx_queues",
+				sizeof(dev->data->rx_queues[0]) * nb_queues,
+				RTE_CACHE_LINE_SIZE);
+		if (dev->data->rx_queues == NULL) {
+			dev->data->nb_rx_queues = 0;
+			return -(ENOMEM);
+		}
+	} else if (dev->data->rx_queues != NULL && nb_queues != 0) { /* re-configure */
+		RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_queue_release, -ENOTSUP);
+
+		rxq = dev->data->rx_queues;
+
+		for (i = nb_queues; i < old_nb_queues; i++)
+			(*dev->dev_ops->rx_queue_release)(rxq[i]);
+		rxq = rte_realloc(rxq, sizeof(rxq[0]) * nb_queues,
+				RTE_CACHE_LINE_SIZE);
+		if (rxq == NULL)
+			return -(ENOMEM);
+		if (nb_queues > old_nb_queues) {
+			uint16_t new_qs = nb_queues - old_nb_queues;
+
+			memset(rxq + old_nb_queues, 0,
+				sizeof(rxq[0]) * new_qs);
+		}
+
+		dev->data->rx_queues = rxq;
+
+	} else if (dev->data->rx_queues != NULL && nb_queues == 0) {
+		RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_queue_release, -ENOTSUP);
+
+		rxq = dev->data->rx_queues;
+
+		for (i = nb_queues; i < old_nb_queues; i++)
+			(*dev->dev_ops->rx_queue_release)(rxq[i]);
+	}
+	dev->data->nb_rx_queues = nb_queues;
+	return 0;
+}
+
+int
+rte_eth_dev_rx_queue_start(uint8_t port_id, uint16_t rx_queue_id)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
+
+	dev = &rte_eth_devices[port_id];
+	if (rx_queue_id >= dev->data->nb_rx_queues) {
+		RTE_PMD_DEBUG_TRACE("Invalid RX queue_id=%d\n", rx_queue_id);
+		return -EINVAL;
+	}
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_queue_start, -ENOTSUP);
+
+	if (dev->data->rx_queue_state[rx_queue_id] != RTE_ETH_QUEUE_STATE_STOPPED) {
+		RTE_PMD_DEBUG_TRACE("Queue %" PRIu16" of device with port_id=%" PRIu8
+			" already started\n",
+			rx_queue_id, port_id);
+		return 0;
+	}
+
+	return dev->dev_ops->rx_queue_start(dev, rx_queue_id);
+
+}
+
+int
+rte_eth_dev_rx_queue_stop(uint8_t port_id, uint16_t rx_queue_id)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
+
+	dev = &rte_eth_devices[port_id];
+	if (rx_queue_id >= dev->data->nb_rx_queues) {
+		RTE_PMD_DEBUG_TRACE("Invalid RX queue_id=%d\n", rx_queue_id);
+		return -EINVAL;
+	}
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_queue_stop, -ENOTSUP);
+
+	if (dev->data->rx_queue_state[rx_queue_id] == RTE_ETH_QUEUE_STATE_STOPPED) {
+		RTE_PMD_DEBUG_TRACE("Queue %" PRIu16" of device with port_id=%" PRIu8
+			" already stopped\n",
+			rx_queue_id, port_id);
+		return 0;
+	}
+
+	return dev->dev_ops->rx_queue_stop(dev, rx_queue_id);
+
+}
+
+int
+rte_eth_dev_tx_queue_start(uint8_t port_id, uint16_t tx_queue_id)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
+
+	dev = &rte_eth_devices[port_id];
+	if (tx_queue_id >= dev->data->nb_tx_queues) {
+		RTE_PMD_DEBUG_TRACE("Invalid TX queue_id=%d\n", tx_queue_id);
+		return -EINVAL;
+	}
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->tx_queue_start, -ENOTSUP);
+
+	if (dev->data->tx_queue_state[tx_queue_id] != RTE_ETH_QUEUE_STATE_STOPPED) {
+		RTE_PMD_DEBUG_TRACE("Queue %" PRIu16" of device with port_id=%" PRIu8
+			" already started\n",
+			tx_queue_id, port_id);
+		return 0;
+	}
+
+	return dev->dev_ops->tx_queue_start(dev, tx_queue_id);
+
+}
+
+int
+rte_eth_dev_tx_queue_stop(uint8_t port_id, uint16_t tx_queue_id)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
+
+	dev = &rte_eth_devices[port_id];
+	if (tx_queue_id >= dev->data->nb_tx_queues) {
+		RTE_PMD_DEBUG_TRACE("Invalid TX queue_id=%d\n", tx_queue_id);
+		return -EINVAL;
+	}
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->tx_queue_stop, -ENOTSUP);
+
+	if (dev->data->tx_queue_state[tx_queue_id] == RTE_ETH_QUEUE_STATE_STOPPED) {
+		RTE_PMD_DEBUG_TRACE("Queue %" PRIu16" of device with port_id=%" PRIu8
+			" already stopped\n",
+			tx_queue_id, port_id);
+		return 0;
+	}
+
+	return dev->dev_ops->tx_queue_stop(dev, tx_queue_id);
+
+}
+
+static int
+rte_eth_dev_tx_queue_config(struct rte_eth_dev *dev, uint16_t nb_queues)
+{
+	uint16_t old_nb_queues = dev->data->nb_tx_queues;
+	void **txq;
+	unsigned i;
+
+	if (dev->data->tx_queues == NULL && nb_queues != 0) { /* first time configuration */
+		dev->data->tx_queues = rte_zmalloc("ethdev->tx_queues",
+						   sizeof(dev->data->tx_queues[0]) * nb_queues,
+						   RTE_CACHE_LINE_SIZE);
+		if (dev->data->tx_queues == NULL) {
+			dev->data->nb_tx_queues = 0;
+			return -(ENOMEM);
+		}
+	} else if (dev->data->tx_queues != NULL && nb_queues != 0) { /* re-configure */
+		RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->tx_queue_release, -ENOTSUP);
+
+		txq = dev->data->tx_queues;
+
+		for (i = nb_queues; i < old_nb_queues; i++)
+			(*dev->dev_ops->tx_queue_release)(txq[i]);
+		txq = rte_realloc(txq, sizeof(txq[0]) * nb_queues,
+				  RTE_CACHE_LINE_SIZE);
+		if (txq == NULL)
+			return -ENOMEM;
+		if (nb_queues > old_nb_queues) {
+			uint16_t new_qs = nb_queues - old_nb_queues;
+
+			memset(txq + old_nb_queues, 0,
+			       sizeof(txq[0]) * new_qs);
+		}
+
+		dev->data->tx_queues = txq;
+
+	} else if (dev->data->tx_queues != NULL && nb_queues == 0) {
+		RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->tx_queue_release, -ENOTSUP);
+
+		txq = dev->data->tx_queues;
+
+		for (i = nb_queues; i < old_nb_queues; i++)
+			(*dev->dev_ops->tx_queue_release)(txq[i]);
+	}
+	dev->data->nb_tx_queues = nb_queues;
+	return 0;
+}
+
+uint32_t
+rte_eth_speed_bitflag(uint32_t speed, int duplex)
+{
+	switch (speed) {
+	case ETH_SPEED_NUM_10M:
+		return duplex ? ETH_LINK_SPEED_10M : ETH_LINK_SPEED_10M_HD;
+	case ETH_SPEED_NUM_100M:
+		return duplex ? ETH_LINK_SPEED_100M : ETH_LINK_SPEED_100M_HD;
+	case ETH_SPEED_NUM_1G:
+		return ETH_LINK_SPEED_1G;
+	case ETH_SPEED_NUM_2_5G:
+		return ETH_LINK_SPEED_2_5G;
+	case ETH_SPEED_NUM_5G:
+		return ETH_LINK_SPEED_5G;
+	case ETH_SPEED_NUM_10G:
+		return ETH_LINK_SPEED_10G;
+	case ETH_SPEED_NUM_20G:
+		return ETH_LINK_SPEED_20G;
+	case ETH_SPEED_NUM_25G:
+		return ETH_LINK_SPEED_25G;
+	case ETH_SPEED_NUM_40G:
+		return ETH_LINK_SPEED_40G;
+	case ETH_SPEED_NUM_50G:
+		return ETH_LINK_SPEED_50G;
+	case ETH_SPEED_NUM_56G:
+		return ETH_LINK_SPEED_56G;
+	case ETH_SPEED_NUM_100G:
+		return ETH_LINK_SPEED_100G;
+	default:
+		return 0;
+	}
+}
+
+int
+rte_eth_dev_configure(uint8_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
+		      const struct rte_eth_conf *dev_conf)
+{
+	struct rte_eth_dev *dev;
+	struct rte_eth_dev_info dev_info;
+	int diag;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
+
+	if (nb_rx_q > RTE_MAX_QUEUES_PER_PORT) {
+		RTE_PMD_DEBUG_TRACE(
+			"Number of RX queues requested (%u) is greater than max supported(%d)\n",
+			nb_rx_q, RTE_MAX_QUEUES_PER_PORT);
+		return -EINVAL;
+	}
+
+	if (nb_tx_q > RTE_MAX_QUEUES_PER_PORT) {
+		RTE_PMD_DEBUG_TRACE(
+			"Number of TX queues requested (%u) is greater than max supported(%d)\n",
+			nb_tx_q, RTE_MAX_QUEUES_PER_PORT);
+		return -EINVAL;
+	}
+
+	dev = &rte_eth_devices[port_id];
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_infos_get, -ENOTSUP);
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_configure, -ENOTSUP);
+
+	if (dev->data->dev_started) {
+		RTE_PMD_DEBUG_TRACE(
+		    "port %d must be stopped to allow configuration\n", port_id);
+		return -EBUSY;
+	}
+
+	/* Copy the dev_conf parameter into the dev structure */
+	memcpy(&dev->data->dev_conf, dev_conf, sizeof(dev->data->dev_conf));
+
+	/*
+	 * Check that the numbers of RX and TX queues are not greater
+	 * than the maximum number of RX and TX queues supported by the
+	 * configured device.
+	 */
+	(*dev->dev_ops->dev_infos_get)(dev, &dev_info);
+
+	if (nb_rx_q == 0 && nb_tx_q == 0) {
+		RTE_PMD_DEBUG_TRACE("ethdev port_id=%d both rx and tx queue cannot be 0\n", port_id);
+		return -EINVAL;
+	}
+
+	if (nb_rx_q > dev_info.max_rx_queues) {
+		RTE_PMD_DEBUG_TRACE("ethdev port_id=%d nb_rx_queues=%d > %d\n",
+				port_id, nb_rx_q, dev_info.max_rx_queues);
+		return -EINVAL;
+	}
+
+	if (nb_tx_q > dev_info.max_tx_queues) {
+		RTE_PMD_DEBUG_TRACE("ethdev port_id=%d nb_tx_queues=%d > %d\n",
+				port_id, nb_tx_q, dev_info.max_tx_queues);
+		return -EINVAL;
+	}
+
+	/*
+	 * If link state interrupt is enabled, check that the
+	 * device supports it.
+	 */
+	if ((dev_conf->intr_conf.lsc == 1) &&
+		(!(dev->data->dev_flags & RTE_ETH_DEV_INTR_LSC))) {
+			RTE_PMD_DEBUG_TRACE("driver %s does not support lsc\n",
+					dev->data->drv_name);
+			return -EINVAL;
+	}
+
+	/*
+	 * If jumbo frames are enabled, check that the maximum RX packet
+	 * length is supported by the configured device.
+	 */
+	if (dev_conf->rxmode.jumbo_frame == 1) {
+		if (dev_conf->rxmode.max_rx_pkt_len >
+		    dev_info.max_rx_pktlen) {
+			RTE_PMD_DEBUG_TRACE("ethdev port_id=%d max_rx_pkt_len %u"
+				" > max valid value %u\n",
+				port_id,
+				(unsigned)dev_conf->rxmode.max_rx_pkt_len,
+				(unsigned)dev_info.max_rx_pktlen);
+			return -EINVAL;
+		} else if (dev_conf->rxmode.max_rx_pkt_len < ETHER_MIN_LEN) {
+			RTE_PMD_DEBUG_TRACE("ethdev port_id=%d max_rx_pkt_len %u"
+				" < min valid value %u\n",
+				port_id,
+				(unsigned)dev_conf->rxmode.max_rx_pkt_len,
+				(unsigned)ETHER_MIN_LEN);
+			return -EINVAL;
+		}
+	} else {
+		if (dev_conf->rxmode.max_rx_pkt_len < ETHER_MIN_LEN ||
+			dev_conf->rxmode.max_rx_pkt_len > ETHER_MAX_LEN)
+			/* Use default value */
+			dev->data->dev_conf.rxmode.max_rx_pkt_len =
+							ETHER_MAX_LEN;
+	}
+
+	/*
+	 * Setup new number of RX/TX queues and reconfigure device.
+	 */
+	diag = rte_eth_dev_rx_queue_config(dev, nb_rx_q);
+	if (diag != 0) {
+		RTE_PMD_DEBUG_TRACE("port%d rte_eth_dev_rx_queue_config = %d\n",
+				port_id, diag);
+		return diag;
+	}
+
+	diag = rte_eth_dev_tx_queue_config(dev, nb_tx_q);
+	if (diag != 0) {
+		RTE_PMD_DEBUG_TRACE("port%d rte_eth_dev_tx_queue_config = %d\n",
+				port_id, diag);
+		rte_eth_dev_rx_queue_config(dev, 0);
+		return diag;
+	}
+
+	diag = (*dev->dev_ops->dev_configure)(dev);
+	if (diag != 0) {
+		RTE_PMD_DEBUG_TRACE("port%d dev_configure = %d\n",
+				port_id, diag);
+		rte_eth_dev_rx_queue_config(dev, 0);
+		rte_eth_dev_tx_queue_config(dev, 0);
+		return diag;
+	}
+
+	return 0;
+}
+
+static void
+rte_eth_dev_config_restore(uint8_t port_id)
+{
+	struct rte_eth_dev *dev;
+	struct rte_eth_dev_info dev_info;
+	struct ether_addr addr;
+	uint16_t i;
+	uint32_t pool = 0;
+
+	dev = &rte_eth_devices[port_id];
+
+	rte_eth_dev_info_get(port_id, &dev_info);
+
+	if (RTE_ETH_DEV_SRIOV(dev).active)
+		pool = RTE_ETH_DEV_SRIOV(dev).def_vmdq_idx;
+
+	/* replay MAC address configuration */
+	for (i = 0; i < dev_info.max_mac_addrs; i++) {
+		addr = dev->data->mac_addrs[i];
+
+		/* skip zero address */
+		if (is_zero_ether_addr(&addr))
+			continue;
+
+		/* add address to the hardware */
+		if  (*dev->dev_ops->mac_addr_add &&
+			(dev->data->mac_pool_sel[i] & (1ULL << pool)))
+			(*dev->dev_ops->mac_addr_add)(dev, &addr, i, pool);
+		else {
+			RTE_PMD_DEBUG_TRACE("port %d: MAC address array not supported\n",
+					port_id);
+			/* exit the loop but not return an error */
+			break;
+		}
+	}
+
+	/* replay promiscuous configuration */
+	if (rte_eth_promiscuous_get(port_id) == 1)
+		rte_eth_promiscuous_enable(port_id);
+	else if (rte_eth_promiscuous_get(port_id) == 0)
+		rte_eth_promiscuous_disable(port_id);
+
+	/* replay all multicast configuration */
+	if (rte_eth_allmulticast_get(port_id) == 1)
+		rte_eth_allmulticast_enable(port_id);
+	else if (rte_eth_allmulticast_get(port_id) == 0)
+		rte_eth_allmulticast_disable(port_id);
+}
+
+int
+rte_eth_dev_start(uint8_t port_id)
+{
+	struct rte_eth_dev *dev;
+	int diag;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
+
+	dev = &rte_eth_devices[port_id];
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_start, -ENOTSUP);
+
+	if (dev->data->dev_started != 0) {
+		RTE_PMD_DEBUG_TRACE("Device with port_id=%" PRIu8
+			" already started\n",
+			port_id);
+		return 0;
+	}
+
+	diag = (*dev->dev_ops->dev_start)(dev);
+	if (diag == 0)
+		dev->data->dev_started = 1;
+	else
+		return diag;
+
+	rte_eth_dev_config_restore(port_id);
+
+	if (dev->data->dev_conf.intr_conf.lsc == 0) {
+		RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->link_update, -ENOTSUP);
+		(*dev->dev_ops->link_update)(dev, 0);
+	}
+	return 0;
+}
+
+void
+rte_eth_dev_stop(uint8_t port_id)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_RET(port_id);
+	dev = &rte_eth_devices[port_id];
+
+	RTE_FUNC_PTR_OR_RET(*dev->dev_ops->dev_stop);
+
+	if (dev->data->dev_started == 0) {
+		RTE_PMD_DEBUG_TRACE("Device with port_id=%" PRIu8
+			" already stopped\n",
+			port_id);
+		return;
+	}
+
+	dev->data->dev_started = 0;
+	(*dev->dev_ops->dev_stop)(dev);
+}
+
+int
+rte_eth_dev_set_link_up(uint8_t port_id)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
+
+	dev = &rte_eth_devices[port_id];
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_set_link_up, -ENOTSUP);
+	return (*dev->dev_ops->dev_set_link_up)(dev);
+}
+
+int
+rte_eth_dev_set_link_down(uint8_t port_id)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
+
+	dev = &rte_eth_devices[port_id];
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_set_link_down, -ENOTSUP);
+	return (*dev->dev_ops->dev_set_link_down)(dev);
+}
+
+void
+rte_eth_dev_close(uint8_t port_id)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_RET(port_id);
+	dev = &rte_eth_devices[port_id];
+
+	RTE_FUNC_PTR_OR_RET(*dev->dev_ops->dev_close);
+	dev->data->dev_started = 0;
+	(*dev->dev_ops->dev_close)(dev);
+
+	rte_free(dev->data->rx_queues);
+	dev->data->rx_queues = NULL;
+	rte_free(dev->data->tx_queues);
+	dev->data->tx_queues = NULL;
+}
+
+int
+rte_eth_rx_queue_setup(uint8_t port_id, uint16_t rx_queue_id,
+		       uint16_t nb_rx_desc, unsigned int socket_id,
+		       const struct rte_eth_rxconf *rx_conf,
+		       struct rte_mempool *mp)
+{
+	int ret;
+	uint32_t mbp_buf_size;
+	struct rte_eth_dev *dev;
+	struct rte_eth_dev_info dev_info;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
+
+	dev = &rte_eth_devices[port_id];
+	if (rx_queue_id >= dev->data->nb_rx_queues) {
+		RTE_PMD_DEBUG_TRACE("Invalid RX queue_id=%d\n", rx_queue_id);
+		return -EINVAL;
+	}
+
+	if (dev->data->dev_started) {
+		RTE_PMD_DEBUG_TRACE(
+		    "port %d must be stopped to allow configuration\n", port_id);
+		return -EBUSY;
+	}
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_infos_get, -ENOTSUP);
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_queue_setup, -ENOTSUP);
+
+	/*
+	 * Check the size of the mbuf data buffer.
+	 * This value must be provided in the private data of the memory pool.
+	 * First check that the memory pool has a valid private data.
+	 */
+	rte_eth_dev_info_get(port_id, &dev_info);
+	if (mp->private_data_size < sizeof(struct rte_pktmbuf_pool_private)) {
+		RTE_PMD_DEBUG_TRACE("%s private_data_size %d < %d\n",
+				mp->name, (int) mp->private_data_size,
+				(int) sizeof(struct rte_pktmbuf_pool_private));
+		return -ENOSPC;
+	}
+	mbp_buf_size = rte_pktmbuf_data_room_size(mp);
+
+	if ((mbp_buf_size - RTE_PKTMBUF_HEADROOM) < dev_info.min_rx_bufsize) {
+		RTE_PMD_DEBUG_TRACE("%s mbuf_data_room_size %d < %d "
+				"(RTE_PKTMBUF_HEADROOM=%d + min_rx_bufsize(dev)"
+				"=%d)\n",
+				mp->name,
+				(int)mbp_buf_size,
+				(int)(RTE_PKTMBUF_HEADROOM +
+				      dev_info.min_rx_bufsize),
+				(int)RTE_PKTMBUF_HEADROOM,
+				(int)dev_info.min_rx_bufsize);
+		return -EINVAL;
+	}
+
+	if (nb_rx_desc > dev_info.rx_desc_lim.nb_max ||
+			nb_rx_desc < dev_info.rx_desc_lim.nb_min ||
+			nb_rx_desc % dev_info.rx_desc_lim.nb_align != 0) {
+
+		RTE_PMD_DEBUG_TRACE("Invalid value for nb_rx_desc(=%hu), "
+			"should be: <= %hu, = %hu, and a product of %hu\n",
+			nb_rx_desc,
+			dev_info.rx_desc_lim.nb_max,
+			dev_info.rx_desc_lim.nb_min,
+			dev_info.rx_desc_lim.nb_align);
+		return -EINVAL;
+	}
+
+	if (rx_conf == NULL)
+		rx_conf = &dev_info.default_rxconf;
+
+	ret = (*dev->dev_ops->rx_queue_setup)(dev, rx_queue_id, nb_rx_desc,
+					      socket_id, rx_conf, mp);
+	if (!ret) {
+		if (!dev->data->min_rx_buf_size ||
+		    dev->data->min_rx_buf_size > mbp_buf_size)
+			dev->data->min_rx_buf_size = mbp_buf_size;
+	}
+
+	return ret;
+}
+
+int
+rte_eth_tx_queue_setup(uint8_t port_id, uint16_t tx_queue_id,
+		       uint16_t nb_tx_desc, unsigned int socket_id,
+		       const struct rte_eth_txconf *tx_conf)
+{
+	struct rte_eth_dev *dev;
+	struct rte_eth_dev_info dev_info;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
+
+	dev = &rte_eth_devices[port_id];
+	if (tx_queue_id >= dev->data->nb_tx_queues) {
+		RTE_PMD_DEBUG_TRACE("Invalid TX queue_id=%d\n", tx_queue_id);
+		return -EINVAL;
+	}
+
+	if (dev->data->dev_started) {
+		RTE_PMD_DEBUG_TRACE(
+		    "port %d must be stopped to allow configuration\n", port_id);
+		return -EBUSY;
+	}
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_infos_get, -ENOTSUP);
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->tx_queue_setup, -ENOTSUP);
+
+	rte_eth_dev_info_get(port_id, &dev_info);
+
+	if (nb_tx_desc > dev_info.tx_desc_lim.nb_max ||
+	    nb_tx_desc < dev_info.tx_desc_lim.nb_min ||
+	    nb_tx_desc % dev_info.tx_desc_lim.nb_align != 0) {
+		RTE_PMD_DEBUG_TRACE("Invalid value for nb_tx_desc(=%hu), "
+				"should be: <= %hu, = %hu, and a product of %hu\n",
+				nb_tx_desc,
+				dev_info.tx_desc_lim.nb_max,
+				dev_info.tx_desc_lim.nb_min,
+				dev_info.tx_desc_lim.nb_align);
+		return -EINVAL;
+	}
+
+	if (tx_conf == NULL)
+		tx_conf = &dev_info.default_txconf;
+
+	return (*dev->dev_ops->tx_queue_setup)(dev, tx_queue_id, nb_tx_desc,
+					       socket_id, tx_conf);
+}
+
+void
+rte_eth_tx_buffer_drop_callback(struct rte_mbuf **pkts, uint16_t unsent,
+		void *userdata __rte_unused)
+{
+	unsigned i;
+
+	for (i = 0; i < unsent; i++)
+		rte_pktmbuf_free(pkts[i]);
+}
+
+void
+rte_eth_tx_buffer_count_callback(struct rte_mbuf **pkts, uint16_t unsent,
+		void *userdata)
+{
+	uint64_t *count = userdata;
+	unsigned i;
+
+	for (i = 0; i < unsent; i++)
+		rte_pktmbuf_free(pkts[i]);
+
+	*count += unsent;
+}
+
+int
+rte_eth_tx_buffer_set_err_callback(struct rte_eth_dev_tx_buffer *buffer,
+		buffer_tx_error_fn cbfn, void *userdata)
+{
+	buffer->error_callback = cbfn;
+	buffer->error_userdata = userdata;
+	return 0;
+}
+
+int
+rte_eth_tx_buffer_init(struct rte_eth_dev_tx_buffer *buffer, uint16_t size)
+{
+	int ret = 0;
+
+	if (buffer == NULL)
+		return -EINVAL;
+
+	buffer->size = size;
+	if (buffer->error_callback == NULL) {
+		ret = rte_eth_tx_buffer_set_err_callback(
+			buffer, rte_eth_tx_buffer_drop_callback, NULL);
+	}
+
+	return ret;
+}
+
+void
+rte_eth_promiscuous_enable(uint8_t port_id)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_RET(port_id);
+	dev = &rte_eth_devices[port_id];
+
+	RTE_FUNC_PTR_OR_RET(*dev->dev_ops->promiscuous_enable);
+	(*dev->dev_ops->promiscuous_enable)(dev);
+	dev->data->promiscuous = 1;
+}
+
+void
+rte_eth_promiscuous_disable(uint8_t port_id)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_RET(port_id);
+	dev = &rte_eth_devices[port_id];
+
+	RTE_FUNC_PTR_OR_RET(*dev->dev_ops->promiscuous_disable);
+	dev->data->promiscuous = 0;
+	(*dev->dev_ops->promiscuous_disable)(dev);
+}
+
+int
+rte_eth_promiscuous_get(uint8_t port_id)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
+
+	dev = &rte_eth_devices[port_id];
+	return dev->data->promiscuous;
+}
+
+void
+rte_eth_allmulticast_enable(uint8_t port_id)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_RET(port_id);
+	dev = &rte_eth_devices[port_id];
+
+	RTE_FUNC_PTR_OR_RET(*dev->dev_ops->allmulticast_enable);
+	(*dev->dev_ops->allmulticast_enable)(dev);
+	dev->data->all_multicast = 1;
+}
+
+void
+rte_eth_allmulticast_disable(uint8_t port_id)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_RET(port_id);
+	dev = &rte_eth_devices[port_id];
+
+	RTE_FUNC_PTR_OR_RET(*dev->dev_ops->allmulticast_disable);
+	dev->data->all_multicast = 0;
+	(*dev->dev_ops->allmulticast_disable)(dev);
+}
+
+int
+rte_eth_allmulticast_get(uint8_t port_id)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
+
+	dev = &rte_eth_devices[port_id];
+	return dev->data->all_multicast;
+}
+
+static inline int
+rte_eth_dev_atomic_read_link_status(struct rte_eth_dev *dev,
+				struct rte_eth_link *link)
+{
+	struct rte_eth_link *dst = link;
+	struct rte_eth_link *src = &(dev->data->dev_link);
+
+	if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
+					*(uint64_t *)src) == 0)
+		return -1;
+
+	return 0;
+}
+
+void
+rte_eth_link_get(uint8_t port_id, struct rte_eth_link *eth_link)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_RET(port_id);
+	dev = &rte_eth_devices[port_id];
+
+	if (dev->data->dev_conf.intr_conf.lsc != 0)
+		rte_eth_dev_atomic_read_link_status(dev, eth_link);
+	else {
+		RTE_FUNC_PTR_OR_RET(*dev->dev_ops->link_update);
+		(*dev->dev_ops->link_update)(dev, 1);
+		*eth_link = dev->data->dev_link;
+	}
+}
+
+void
+rte_eth_link_get_nowait(uint8_t port_id, struct rte_eth_link *eth_link)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_RET(port_id);
+	dev = &rte_eth_devices[port_id];
+
+	if (dev->data->dev_conf.intr_conf.lsc != 0)
+		rte_eth_dev_atomic_read_link_status(dev, eth_link);
+	else {
+		RTE_FUNC_PTR_OR_RET(*dev->dev_ops->link_update);
+		(*dev->dev_ops->link_update)(dev, 0);
+		*eth_link = dev->data->dev_link;
+	}
+}
+
+int
+rte_eth_stats_get(uint8_t port_id, struct rte_eth_stats *stats)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
+
+	dev = &rte_eth_devices[port_id];
+	memset(stats, 0, sizeof(*stats));
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->stats_get, -ENOTSUP);
+	(*dev->dev_ops->stats_get)(dev, stats);
+	stats->rx_nombuf = dev->data->rx_mbuf_alloc_failed;
+	return 0;
+}
+
+void
+rte_eth_stats_reset(uint8_t port_id)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_RET(port_id);
+	dev = &rte_eth_devices[port_id];
+
+	RTE_FUNC_PTR_OR_RET(*dev->dev_ops->stats_reset);
+	(*dev->dev_ops->stats_reset)(dev);
+	dev->data->rx_mbuf_alloc_failed = 0;
+}
+
+/* retrieve ethdev extended statistics */
+int
+rte_eth_xstats_get(uint8_t port_id, struct rte_eth_xstats *xstats,
+	unsigned n)
+{
+	struct rte_eth_stats eth_stats;
+	struct rte_eth_dev *dev;
+	unsigned count = 0, i, q;
+	signed xcount = 0;
+	uint64_t val, *stats_ptr;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
+
+	dev = &rte_eth_devices[port_id];
+
+	/* Return generic statistics */
+	count = RTE_NB_STATS + (dev->data->nb_rx_queues * RTE_NB_RXQ_STATS) +
+		(dev->data->nb_tx_queues * RTE_NB_TXQ_STATS);
+
+	/* implemented by the driver */
+	if (dev->dev_ops->xstats_get != NULL) {
+		/* Retrieve the xstats from the driver at the end of the
+		 * xstats struct.
+		 */
+		xcount = (*dev->dev_ops->xstats_get)(dev,
+				     xstats ? xstats + count : NULL,
+				     (n > count) ? n - count : 0);
+
+		if (xcount < 0)
+			return xcount;
+	}
+
+	if (n < count + xcount || xstats == NULL)
+		return count + xcount;
+
+	/* now fill the xstats structure */
+	count = 0;
+	rte_eth_stats_get(port_id, &eth_stats);
+
+	/* global stats */
+	for (i = 0; i < RTE_NB_STATS; i++) {
+		stats_ptr = RTE_PTR_ADD(&eth_stats,
+					rte_stats_strings[i].offset);
+		val = *stats_ptr;
+		snprintf(xstats[count].name, sizeof(xstats[count].name),
+			"%s", rte_stats_strings[i].name);
+		xstats[count++].value = val;
+	}
+
+	/* per-rxq stats */
+	for (q = 0; q < dev->data->nb_rx_queues; q++) {
+		for (i = 0; i < RTE_NB_RXQ_STATS; i++) {
+			stats_ptr = RTE_PTR_ADD(&eth_stats,
+					rte_rxq_stats_strings[i].offset +
+					q * sizeof(uint64_t));
+			val = *stats_ptr;
+			snprintf(xstats[count].name, sizeof(xstats[count].name),
+				"rx_q%u_%s", q,
+				rte_rxq_stats_strings[i].name);
+			xstats[count++].value = val;
+		}
+	}
+
+	/* per-txq stats */
+	for (q = 0; q < dev->data->nb_tx_queues; q++) {
+		for (i = 0; i < RTE_NB_TXQ_STATS; i++) {
+			stats_ptr = RTE_PTR_ADD(&eth_stats,
+					rte_txq_stats_strings[i].offset +
+					q * sizeof(uint64_t));
+			val = *stats_ptr;
+			snprintf(xstats[count].name, sizeof(xstats[count].name),
+				"tx_q%u_%s", q,
+				rte_txq_stats_strings[i].name);
+			xstats[count++].value = val;
+		}
+	}
+
+	return count + xcount;
+}
+
+/* reset ethdev extended statistics */
+void
+rte_eth_xstats_reset(uint8_t port_id)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_RET(port_id);
+	dev = &rte_eth_devices[port_id];
+
+	/* implemented by the driver */
+	if (dev->dev_ops->xstats_reset != NULL) {
+		(*dev->dev_ops->xstats_reset)(dev);
+		return;
+	}
+
+	/* fallback to default */
+	rte_eth_stats_reset(port_id);
+}
+
+static int
+set_queue_stats_mapping(uint8_t port_id, uint16_t queue_id, uint8_t stat_idx,
+		uint8_t is_rx)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+	dev = &rte_eth_devices[port_id];
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->queue_stats_mapping_set, -ENOTSUP);
+	return (*dev->dev_ops->queue_stats_mapping_set)
+			(dev, queue_id, stat_idx, is_rx);
+}
+
+
+int
+rte_eth_dev_set_tx_queue_stats_mapping(uint8_t port_id, uint16_t tx_queue_id,
+		uint8_t stat_idx)
+{
+	return set_queue_stats_mapping(port_id, tx_queue_id, stat_idx,
+			STAT_QMAP_TX);
+}
+
+
+int
+rte_eth_dev_set_rx_queue_stats_mapping(uint8_t port_id, uint16_t rx_queue_id,
+		uint8_t stat_idx)
+{
+	return set_queue_stats_mapping(port_id, rx_queue_id, stat_idx,
+			STAT_QMAP_RX);
+}
+
+
+void
+rte_eth_dev_info_get(uint8_t port_id, struct rte_eth_dev_info *dev_info)
+{
+	struct rte_eth_dev *dev;
+	const struct rte_eth_desc_lim lim = {
+		.nb_max = UINT16_MAX,
+		.nb_min = 0,
+		.nb_align = 1,
+	};
+
+	RTE_ETH_VALID_PORTID_OR_RET(port_id);
+	dev = &rte_eth_devices[port_id];
+
+	memset(dev_info, 0, sizeof(struct rte_eth_dev_info));
+	dev_info->rx_desc_lim = lim;
+	dev_info->tx_desc_lim = lim;
+
+	RTE_FUNC_PTR_OR_RET(*dev->dev_ops->dev_infos_get);
+	(*dev->dev_ops->dev_infos_get)(dev, dev_info);
+	dev_info->pci_dev = dev->pci_dev;
+	dev_info->driver_name = dev->data->drv_name;
+}
+
+int
+rte_eth_dev_get_supported_ptypes(uint8_t port_id, uint32_t ptype_mask,
+				 uint32_t *ptypes, int num)
+{
+	int i, j;
+	struct rte_eth_dev *dev;
+	const uint32_t *all_ptypes;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+	dev = &rte_eth_devices[port_id];
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_supported_ptypes_get, 0);
+	all_ptypes = (*dev->dev_ops->dev_supported_ptypes_get)(dev);
+
+	if (!all_ptypes)
+		return 0;
+
+	for (i = 0, j = 0; all_ptypes[i] != RTE_PTYPE_UNKNOWN; ++i)
+		if (all_ptypes[i] & ptype_mask) {
+			if (j < num)
+				ptypes[j] = all_ptypes[i];
+			j++;
+		}
+
+	return j;
+}
+
+void
+rte_eth_macaddr_get(uint8_t port_id, struct ether_addr *mac_addr)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_RET(port_id);
+	dev = &rte_eth_devices[port_id];
+	ether_addr_copy(&dev->data->mac_addrs[0], mac_addr);
+}
+
+
+int
+rte_eth_dev_get_mtu(uint8_t port_id, uint16_t *mtu)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+	dev = &rte_eth_devices[port_id];
+	*mtu = dev->data->mtu;
+	return 0;
+}
+
+int
+rte_eth_dev_set_mtu(uint8_t port_id, uint16_t mtu)
+{
+	int ret;
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+	dev = &rte_eth_devices[port_id];
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->mtu_set, -ENOTSUP);
+
+	ret = (*dev->dev_ops->mtu_set)(dev, mtu);
+	if (!ret)
+		dev->data->mtu = mtu;
+
+	return ret;
+}
+
+int
+rte_eth_dev_vlan_filter(uint8_t port_id, uint16_t vlan_id, int on)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+	dev = &rte_eth_devices[port_id];
+	if (!(dev->data->dev_conf.rxmode.hw_vlan_filter)) {
+		RTE_PMD_DEBUG_TRACE("port %d: vlan-filtering disabled\n", port_id);
+		return -ENOSYS;
+	}
+
+	if (vlan_id > 4095) {
+		RTE_PMD_DEBUG_TRACE("(port_id=%d) invalid vlan_id=%u > 4095\n",
+				port_id, (unsigned) vlan_id);
+		return -EINVAL;
+	}
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->vlan_filter_set, -ENOTSUP);
+
+	return (*dev->dev_ops->vlan_filter_set)(dev, vlan_id, on);
+}
+
+int
+rte_eth_dev_set_vlan_strip_on_queue(uint8_t port_id, uint16_t rx_queue_id, int on)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+	dev = &rte_eth_devices[port_id];
+	if (rx_queue_id >= dev->data->nb_rx_queues) {
+		RTE_PMD_DEBUG_TRACE("Invalid rx_queue_id=%d\n", port_id);
+		return -EINVAL;
+	}
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->vlan_strip_queue_set, -ENOTSUP);
+	(*dev->dev_ops->vlan_strip_queue_set)(dev, rx_queue_id, on);
+
+	return 0;
+}
+
+int
+rte_eth_dev_set_vlan_ether_type(uint8_t port_id,
+				enum rte_vlan_type vlan_type,
+				uint16_t tpid)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+	dev = &rte_eth_devices[port_id];
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->vlan_tpid_set, -ENOTSUP);
+
+	return (*dev->dev_ops->vlan_tpid_set)(dev, vlan_type, tpid);
+}
+
+int
+rte_eth_dev_set_vlan_offload(uint8_t port_id, int offload_mask)
+{
+	struct rte_eth_dev *dev;
+	int ret = 0;
+	int mask = 0;
+	int cur, org = 0;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+	dev = &rte_eth_devices[port_id];
+
+	/*check which option changed by application*/
+	cur = !!(offload_mask & ETH_VLAN_STRIP_OFFLOAD);
+	org = !!(dev->data->dev_conf.rxmode.hw_vlan_strip);
+	if (cur != org) {
+		dev->data->dev_conf.rxmode.hw_vlan_strip = (uint8_t)cur;
+		mask |= ETH_VLAN_STRIP_MASK;
+	}
+
+	cur = !!(offload_mask & ETH_VLAN_FILTER_OFFLOAD);
+	org = !!(dev->data->dev_conf.rxmode.hw_vlan_filter);
+	if (cur != org) {
+		dev->data->dev_conf.rxmode.hw_vlan_filter = (uint8_t)cur;
+		mask |= ETH_VLAN_FILTER_MASK;
+	}
+
+	cur = !!(offload_mask & ETH_VLAN_EXTEND_OFFLOAD);
+	org = !!(dev->data->dev_conf.rxmode.hw_vlan_extend);
+	if (cur != org) {
+		dev->data->dev_conf.rxmode.hw_vlan_extend = (uint8_t)cur;
+		mask |= ETH_VLAN_EXTEND_MASK;
+	}
+
+	/*no change*/
+	if (mask == 0)
+		return ret;
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->vlan_offload_set, -ENOTSUP);
+	(*dev->dev_ops->vlan_offload_set)(dev, mask);
+
+	return ret;
+}
+
+int
+rte_eth_dev_get_vlan_offload(uint8_t port_id)
+{
+	struct rte_eth_dev *dev;
+	int ret = 0;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+	dev = &rte_eth_devices[port_id];
+
+	if (dev->data->dev_conf.rxmode.hw_vlan_strip)
+		ret |= ETH_VLAN_STRIP_OFFLOAD;
+
+	if (dev->data->dev_conf.rxmode.hw_vlan_filter)
+		ret |= ETH_VLAN_FILTER_OFFLOAD;
+
+	if (dev->data->dev_conf.rxmode.hw_vlan_extend)
+		ret |= ETH_VLAN_EXTEND_OFFLOAD;
+
+	return ret;
+}
+
+int
+rte_eth_dev_set_vlan_pvid(uint8_t port_id, uint16_t pvid, int on)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+	dev = &rte_eth_devices[port_id];
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->vlan_pvid_set, -ENOTSUP);
+	(*dev->dev_ops->vlan_pvid_set)(dev, pvid, on);
+
+	return 0;
+}
+
+int
+rte_eth_dev_flow_ctrl_get(uint8_t port_id, struct rte_eth_fc_conf *fc_conf)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+	dev = &rte_eth_devices[port_id];
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->flow_ctrl_get, -ENOTSUP);
+	memset(fc_conf, 0, sizeof(*fc_conf));
+	return (*dev->dev_ops->flow_ctrl_get)(dev, fc_conf);
+}
+
+int
+rte_eth_dev_flow_ctrl_set(uint8_t port_id, struct rte_eth_fc_conf *fc_conf)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+	if ((fc_conf->send_xon != 0) && (fc_conf->send_xon != 1)) {
+		RTE_PMD_DEBUG_TRACE("Invalid send_xon, only 0/1 allowed\n");
+		return -EINVAL;
+	}
+
+	dev = &rte_eth_devices[port_id];
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->flow_ctrl_set, -ENOTSUP);
+	return (*dev->dev_ops->flow_ctrl_set)(dev, fc_conf);
+}
+
+int
+rte_eth_dev_priority_flow_ctrl_set(uint8_t port_id, struct rte_eth_pfc_conf *pfc_conf)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+	if (pfc_conf->priority > (ETH_DCB_NUM_USER_PRIORITIES - 1)) {
+		RTE_PMD_DEBUG_TRACE("Invalid priority, only 0-7 allowed\n");
+		return -EINVAL;
+	}
+
+	dev = &rte_eth_devices[port_id];
+	/* High water, low water validation are device specific */
+	if  (*dev->dev_ops->priority_flow_ctrl_set)
+		return (*dev->dev_ops->priority_flow_ctrl_set)(dev, pfc_conf);
+	return -ENOTSUP;
+}
+
+static int
+rte_eth_check_reta_mask(struct rte_eth_rss_reta_entry64 *reta_conf,
+			uint16_t reta_size)
+{
+	uint16_t i, num;
+
+	if (!reta_conf)
+		return -EINVAL;
+
+	if (reta_size != RTE_ALIGN(reta_size, RTE_RETA_GROUP_SIZE)) {
+		RTE_PMD_DEBUG_TRACE("Invalid reta size, should be %u aligned\n",
+							RTE_RETA_GROUP_SIZE);
+		return -EINVAL;
+	}
+
+	num = reta_size / RTE_RETA_GROUP_SIZE;
+	for (i = 0; i < num; i++) {
+		if (reta_conf[i].mask)
+			return 0;
+	}
+
+	return -EINVAL;
+}
+
+static int
+rte_eth_check_reta_entry(struct rte_eth_rss_reta_entry64 *reta_conf,
+			 uint16_t reta_size,
+			 uint16_t max_rxq)
+{
+	uint16_t i, idx, shift;
+
+	if (!reta_conf)
+		return -EINVAL;
+
+	if (max_rxq == 0) {
+		RTE_PMD_DEBUG_TRACE("No receive queue is available\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < reta_size; i++) {
+		idx = i / RTE_RETA_GROUP_SIZE;
+		shift = i % RTE_RETA_GROUP_SIZE;
+		if ((reta_conf[idx].mask & (1ULL << shift)) &&
+			(reta_conf[idx].reta[shift] >= max_rxq)) {
+			RTE_PMD_DEBUG_TRACE("reta_conf[%u]->reta[%u]: %u exceeds "
+				"the maximum rxq index: %u\n", idx, shift,
+				reta_conf[idx].reta[shift], max_rxq);
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+int
+rte_eth_dev_rss_reta_update(uint8_t port_id,
+			    struct rte_eth_rss_reta_entry64 *reta_conf,
+			    uint16_t reta_size)
+{
+	struct rte_eth_dev *dev;
+	int ret;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+	/* Check mask bits */
+	ret = rte_eth_check_reta_mask(reta_conf, reta_size);
+	if (ret < 0)
+		return ret;
+
+	dev = &rte_eth_devices[port_id];
+
+	/* Check entry value */
+	ret = rte_eth_check_reta_entry(reta_conf, reta_size,
+				dev->data->nb_rx_queues);
+	if (ret < 0)
+		return ret;
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->reta_update, -ENOTSUP);
+	return (*dev->dev_ops->reta_update)(dev, reta_conf, reta_size);
+}
+
+int
+rte_eth_dev_rss_reta_query(uint8_t port_id,
+			   struct rte_eth_rss_reta_entry64 *reta_conf,
+			   uint16_t reta_size)
+{
+	struct rte_eth_dev *dev;
+	int ret;
+
+	if (port_id >= nb_ports) {
+		RTE_PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+		return -ENODEV;
+	}
+
+	/* Check mask bits */
+	ret = rte_eth_check_reta_mask(reta_conf, reta_size);
+	if (ret < 0)
+		return ret;
+
+	dev = &rte_eth_devices[port_id];
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->reta_query, -ENOTSUP);
+	return (*dev->dev_ops->reta_query)(dev, reta_conf, reta_size);
+}
+
+int
+rte_eth_dev_rss_hash_update(uint8_t port_id, struct rte_eth_rss_conf *rss_conf)
+{
+	struct rte_eth_dev *dev;
+	uint16_t rss_hash_protos;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+	rss_hash_protos = rss_conf->rss_hf;
+	if ((rss_hash_protos != 0) &&
+	    ((rss_hash_protos & ETH_RSS_PROTO_MASK) == 0)) {
+		RTE_PMD_DEBUG_TRACE("Invalid rss_hash_protos=0x%x\n",
+				rss_hash_protos);
+		return -EINVAL;
+	}
+	dev = &rte_eth_devices[port_id];
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rss_hash_update, -ENOTSUP);
+	return (*dev->dev_ops->rss_hash_update)(dev, rss_conf);
+}
+
+int
+rte_eth_dev_rss_hash_conf_get(uint8_t port_id,
+			      struct rte_eth_rss_conf *rss_conf)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+	dev = &rte_eth_devices[port_id];
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rss_hash_conf_get, -ENOTSUP);
+	return (*dev->dev_ops->rss_hash_conf_get)(dev, rss_conf);
+}
+
+int
+rte_eth_dev_udp_tunnel_port_add(uint8_t port_id,
+				struct rte_eth_udp_tunnel *udp_tunnel)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+	if (udp_tunnel == NULL) {
+		RTE_PMD_DEBUG_TRACE("Invalid udp_tunnel parameter\n");
+		return -EINVAL;
+	}
+
+	if (udp_tunnel->prot_type >= RTE_TUNNEL_TYPE_MAX) {
+		RTE_PMD_DEBUG_TRACE("Invalid tunnel type\n");
+		return -EINVAL;
+	}
+
+	dev = &rte_eth_devices[port_id];
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->udp_tunnel_port_add, -ENOTSUP);
+	return (*dev->dev_ops->udp_tunnel_port_add)(dev, udp_tunnel);
+}
+
+int
+rte_eth_dev_udp_tunnel_port_delete(uint8_t port_id,
+				   struct rte_eth_udp_tunnel *udp_tunnel)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+	dev = &rte_eth_devices[port_id];
+
+	if (udp_tunnel == NULL) {
+		RTE_PMD_DEBUG_TRACE("Invalid udp_tunnel parameter\n");
+		return -EINVAL;
+	}
+
+	if (udp_tunnel->prot_type >= RTE_TUNNEL_TYPE_MAX) {
+		RTE_PMD_DEBUG_TRACE("Invalid tunnel type\n");
+		return -EINVAL;
+	}
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->udp_tunnel_port_del, -ENOTSUP);
+	return (*dev->dev_ops->udp_tunnel_port_del)(dev, udp_tunnel);
+}
+
+int
+rte_eth_led_on(uint8_t port_id)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+	dev = &rte_eth_devices[port_id];
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_led_on, -ENOTSUP);
+	return (*dev->dev_ops->dev_led_on)(dev);
+}
+
+int
+rte_eth_led_off(uint8_t port_id)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+	dev = &rte_eth_devices[port_id];
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_led_off, -ENOTSUP);
+	return (*dev->dev_ops->dev_led_off)(dev);
+}
+
+/*
+ * Returns index into MAC address array of addr. Use 00:00:00:00:00:00 to find
+ * an empty spot.
+ */
+static int
+get_mac_addr_index(uint8_t port_id, const struct ether_addr *addr)
+{
+	struct rte_eth_dev_info dev_info;
+	struct rte_eth_dev *dev = &rte_eth_devices[port_id];
+	unsigned i;
+
+	rte_eth_dev_info_get(port_id, &dev_info);
+
+	for (i = 0; i < dev_info.max_mac_addrs; i++)
+		if (memcmp(addr, &dev->data->mac_addrs[i], ETHER_ADDR_LEN) == 0)
+			return i;
+
+	return -1;
+}
+
+static const struct ether_addr null_mac_addr;
+
+int
+rte_eth_dev_mac_addr_add(uint8_t port_id, struct ether_addr *addr,
+			uint32_t pool)
+{
+	struct rte_eth_dev *dev;
+	int index;
+	uint64_t pool_mask;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+	dev = &rte_eth_devices[port_id];
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->mac_addr_add, -ENOTSUP);
+
+	if (is_zero_ether_addr(addr)) {
+		RTE_PMD_DEBUG_TRACE("port %d: Cannot add NULL MAC address\n",
+			port_id);
+		return -EINVAL;
+	}
+	if (pool >= ETH_64_POOLS) {
+		RTE_PMD_DEBUG_TRACE("pool id must be 0-%d\n", ETH_64_POOLS - 1);
+		return -EINVAL;
+	}
+
+	index = get_mac_addr_index(port_id, addr);
+	if (index < 0) {
+		index = get_mac_addr_index(port_id, &null_mac_addr);
+		if (index < 0) {
+			RTE_PMD_DEBUG_TRACE("port %d: MAC address array full\n",
+				port_id);
+			return -ENOSPC;
+		}
+	} else {
+		pool_mask = dev->data->mac_pool_sel[index];
+
+		/* Check if both MAC address and pool is already there, and do nothing */
+		if (pool_mask & (1ULL << pool))
+			return 0;
+	}
+
+	/* Update NIC */
+	(*dev->dev_ops->mac_addr_add)(dev, addr, index, pool);
+
+	/* Update address in NIC data structure */
+	ether_addr_copy(addr, &dev->data->mac_addrs[index]);
+
+	/* Update pool bitmap in NIC data structure */
+	dev->data->mac_pool_sel[index] |= (1ULL << pool);
+
+	return 0;
+}
+
+int
+rte_eth_dev_mac_addr_remove(uint8_t port_id, struct ether_addr *addr)
+{
+	struct rte_eth_dev *dev;
+	int index;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+	dev = &rte_eth_devices[port_id];
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->mac_addr_remove, -ENOTSUP);
+
+	index = get_mac_addr_index(port_id, addr);
+	if (index == 0) {
+		RTE_PMD_DEBUG_TRACE("port %d: Cannot remove default MAC address\n", port_id);
+		return -EADDRINUSE;
+	} else if (index < 0)
+		return 0;  /* Do nothing if address wasn't found */
+
+	/* Update NIC */
+	(*dev->dev_ops->mac_addr_remove)(dev, index);
+
+	/* Update address in NIC data structure */
+	ether_addr_copy(&null_mac_addr, &dev->data->mac_addrs[index]);
+
+	/* reset pool bitmap */
+	dev->data->mac_pool_sel[index] = 0;
+
+	return 0;
+}
+
+int
+rte_eth_dev_default_mac_addr_set(uint8_t port_id, struct ether_addr *addr)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+	if (!is_valid_assigned_ether_addr(addr))
+		return -EINVAL;
+
+	dev = &rte_eth_devices[port_id];
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->mac_addr_set, -ENOTSUP);
+
+	/* Update default address in NIC data structure */
+	ether_addr_copy(addr, &dev->data->mac_addrs[0]);
+
+	(*dev->dev_ops->mac_addr_set)(dev, addr);
+
+	return 0;
+}
+
+int
+rte_eth_dev_set_vf_rxmode(uint8_t port_id,  uint16_t vf,
+				uint16_t rx_mode, uint8_t on)
+{
+	uint16_t num_vfs;
+	struct rte_eth_dev *dev;
+	struct rte_eth_dev_info dev_info;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+	dev = &rte_eth_devices[port_id];
+	rte_eth_dev_info_get(port_id, &dev_info);
+
+	num_vfs = dev_info.max_vfs;
+	if (vf > num_vfs) {
+		RTE_PMD_DEBUG_TRACE("set VF RX mode:invalid VF id %d\n", vf);
+		return -EINVAL;
+	}
+
+	if (rx_mode == 0) {
+		RTE_PMD_DEBUG_TRACE("set VF RX mode:mode mask ca not be zero\n");
+		return -EINVAL;
+	}
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->set_vf_rx_mode, -ENOTSUP);
+	return (*dev->dev_ops->set_vf_rx_mode)(dev, vf, rx_mode, on);
+}
+
+/*
+ * Returns index into MAC address array of addr. Use 00:00:00:00:00:00 to find
+ * an empty spot.
+ */
+static int
+get_hash_mac_addr_index(uint8_t port_id, const struct ether_addr *addr)
+{
+	struct rte_eth_dev_info dev_info;
+	struct rte_eth_dev *dev = &rte_eth_devices[port_id];
+	unsigned i;
+
+	rte_eth_dev_info_get(port_id, &dev_info);
+	if (!dev->data->hash_mac_addrs)
+		return -1;
+
+	for (i = 0; i < dev_info.max_hash_mac_addrs; i++)
+		if (memcmp(addr, &dev->data->hash_mac_addrs[i],
+			ETHER_ADDR_LEN) == 0)
+			return i;
+
+	return -1;
+}
+
+int
+rte_eth_dev_uc_hash_table_set(uint8_t port_id, struct ether_addr *addr,
+				uint8_t on)
+{
+	int index;
+	int ret;
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+	dev = &rte_eth_devices[port_id];
+	if (is_zero_ether_addr(addr)) {
+		RTE_PMD_DEBUG_TRACE("port %d: Cannot add NULL MAC address\n",
+			port_id);
+		return -EINVAL;
+	}
+
+	index = get_hash_mac_addr_index(port_id, addr);
+	/* Check if it's already there, and do nothing */
+	if ((index >= 0) && (on))
+		return 0;
+
+	if (index < 0) {
+		if (!on) {
+			RTE_PMD_DEBUG_TRACE("port %d: the MAC address was not "
+				"set in UTA\n", port_id);
+			return -EINVAL;
+		}
+
+		index = get_hash_mac_addr_index(port_id, &null_mac_addr);
+		if (index < 0) {
+			RTE_PMD_DEBUG_TRACE("port %d: MAC address array full\n",
+					port_id);
+			return -ENOSPC;
+		}
+	}
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->uc_hash_table_set, -ENOTSUP);
+	ret = (*dev->dev_ops->uc_hash_table_set)(dev, addr, on);
+	if (ret == 0) {
+		/* Update address in NIC data structure */
+		if (on)
+			ether_addr_copy(addr,
+					&dev->data->hash_mac_addrs[index]);
+		else
+			ether_addr_copy(&null_mac_addr,
+					&dev->data->hash_mac_addrs[index]);
+	}
+
+	return ret;
+}
+
+int
+rte_eth_dev_uc_all_hash_table_set(uint8_t port_id, uint8_t on)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+	dev = &rte_eth_devices[port_id];
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->uc_all_hash_table_set, -ENOTSUP);
+	return (*dev->dev_ops->uc_all_hash_table_set)(dev, on);
+}
+
+int
+rte_eth_dev_set_vf_rx(uint8_t port_id, uint16_t vf, uint8_t on)
+{
+	uint16_t num_vfs;
+	struct rte_eth_dev *dev;
+	struct rte_eth_dev_info dev_info;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+	dev = &rte_eth_devices[port_id];
+	rte_eth_dev_info_get(port_id, &dev_info);
+
+	num_vfs = dev_info.max_vfs;
+	if (vf > num_vfs) {
+		RTE_PMD_DEBUG_TRACE("port %d: invalid vf id\n", port_id);
+		return -EINVAL;
+	}
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->set_vf_rx, -ENOTSUP);
+	return (*dev->dev_ops->set_vf_rx)(dev, vf, on);
+}
+
+int
+rte_eth_dev_set_vf_tx(uint8_t port_id, uint16_t vf, uint8_t on)
+{
+	uint16_t num_vfs;
+	struct rte_eth_dev *dev;
+	struct rte_eth_dev_info dev_info;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+	dev = &rte_eth_devices[port_id];
+	rte_eth_dev_info_get(port_id, &dev_info);
+
+	num_vfs = dev_info.max_vfs;
+	if (vf > num_vfs) {
+		RTE_PMD_DEBUG_TRACE("set pool tx:invalid pool id=%d\n", vf);
+		return -EINVAL;
+	}
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->set_vf_tx, -ENOTSUP);
+	return (*dev->dev_ops->set_vf_tx)(dev, vf, on);
+}
+
+int
+rte_eth_dev_set_vf_vlan_filter(uint8_t port_id, uint16_t vlan_id,
+			       uint64_t vf_mask, uint8_t vlan_on)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+	dev = &rte_eth_devices[port_id];
+
+	if (vlan_id > ETHER_MAX_VLAN_ID) {
+		RTE_PMD_DEBUG_TRACE("VF VLAN filter:invalid VLAN id=%d\n",
+			vlan_id);
+		return -EINVAL;
+	}
+
+	if (vf_mask == 0) {
+		RTE_PMD_DEBUG_TRACE("VF VLAN filter:pool_mask can not be 0\n");
+		return -EINVAL;
+	}
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->set_vf_vlan_filter, -ENOTSUP);
+	return (*dev->dev_ops->set_vf_vlan_filter)(dev, vlan_id,
+						   vf_mask, vlan_on);
+}
+
+int rte_eth_set_queue_rate_limit(uint8_t port_id, uint16_t queue_idx,
+					uint16_t tx_rate)
+{
+	struct rte_eth_dev *dev;
+	struct rte_eth_dev_info dev_info;
+	struct rte_eth_link link;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+	dev = &rte_eth_devices[port_id];
+	rte_eth_dev_info_get(port_id, &dev_info);
+	link = dev->data->dev_link;
+
+	if (queue_idx > dev_info.max_tx_queues) {
+		RTE_PMD_DEBUG_TRACE("set queue rate limit:port %d: "
+				"invalid queue id=%d\n", port_id, queue_idx);
+		return -EINVAL;
+	}
+
+	if (tx_rate > link.link_speed) {
+		RTE_PMD_DEBUG_TRACE("set queue rate limit:invalid tx_rate=%d, "
+				"bigger than link speed= %d\n",
+			tx_rate, link.link_speed);
+		return -EINVAL;
+	}
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->set_queue_rate_limit, -ENOTSUP);
+	return (*dev->dev_ops->set_queue_rate_limit)(dev, queue_idx, tx_rate);
+}
+
+int rte_eth_set_vf_rate_limit(uint8_t port_id, uint16_t vf, uint16_t tx_rate,
+				uint64_t q_msk)
+{
+	struct rte_eth_dev *dev;
+	struct rte_eth_dev_info dev_info;
+	struct rte_eth_link link;
+
+	if (q_msk == 0)
+		return 0;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+	dev = &rte_eth_devices[port_id];
+	rte_eth_dev_info_get(port_id, &dev_info);
+	link = dev->data->dev_link;
+
+	if (vf > dev_info.max_vfs) {
+		RTE_PMD_DEBUG_TRACE("set VF rate limit:port %d: "
+				"invalid vf id=%d\n", port_id, vf);
+		return -EINVAL;
+	}
+
+	if (tx_rate > link.link_speed) {
+		RTE_PMD_DEBUG_TRACE("set VF rate limit:invalid tx_rate=%d, "
+				"bigger than link speed= %d\n",
+				tx_rate, link.link_speed);
+		return -EINVAL;
+	}
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->set_vf_rate_limit, -ENOTSUP);
+	return (*dev->dev_ops->set_vf_rate_limit)(dev, vf, tx_rate, q_msk);
+}
+
+int
+rte_eth_mirror_rule_set(uint8_t port_id,
+			struct rte_eth_mirror_conf *mirror_conf,
+			uint8_t rule_id, uint8_t on)
+{
+	struct rte_eth_dev *dev = &rte_eth_devices[port_id];
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+	if (mirror_conf->rule_type == 0) {
+		RTE_PMD_DEBUG_TRACE("mirror rule type can not be 0.\n");
+		return -EINVAL;
+	}
+
+	if (mirror_conf->dst_pool >= ETH_64_POOLS) {
+		RTE_PMD_DEBUG_TRACE("Invalid dst pool, pool id must be 0-%d\n",
+				ETH_64_POOLS - 1);
+		return -EINVAL;
+	}
+
+	if ((mirror_conf->rule_type & (ETH_MIRROR_VIRTUAL_POOL_UP |
+	     ETH_MIRROR_VIRTUAL_POOL_DOWN)) &&
+	    (mirror_conf->pool_mask == 0)) {
+		RTE_PMD_DEBUG_TRACE("Invalid mirror pool, pool mask can not be 0.\n");
+		return -EINVAL;
+	}
+
+	if ((mirror_conf->rule_type & ETH_MIRROR_VLAN) &&
+	    mirror_conf->vlan.vlan_mask == 0) {
+		RTE_PMD_DEBUG_TRACE("Invalid vlan mask, vlan mask can not be 0.\n");
+		return -EINVAL;
+	}
+
+	dev = &rte_eth_devices[port_id];
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->mirror_rule_set, -ENOTSUP);
+
+	return (*dev->dev_ops->mirror_rule_set)(dev, mirror_conf, rule_id, on);
+}
+
+int
+rte_eth_mirror_rule_reset(uint8_t port_id, uint8_t rule_id)
+{
+	struct rte_eth_dev *dev = &rte_eth_devices[port_id];
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+	dev = &rte_eth_devices[port_id];
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->mirror_rule_reset, -ENOTSUP);
+
+	return (*dev->dev_ops->mirror_rule_reset)(dev, rule_id);
+}
+
+int
+rte_eth_dev_callback_register(uint8_t port_id,
+			enum rte_eth_event_type event,
+			rte_eth_dev_cb_fn cb_fn, void *cb_arg)
+{
+	struct rte_eth_dev *dev;
+	struct rte_eth_dev_callback *user_cb;
+
+	if (!cb_fn)
+		return -EINVAL;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
+
+	dev = &rte_eth_devices[port_id];
+	rte_spinlock_lock(&rte_eth_dev_cb_lock);
+
+	TAILQ_FOREACH(user_cb, &(dev->link_intr_cbs), next) {
+		if (user_cb->cb_fn == cb_fn &&
+			user_cb->cb_arg == cb_arg &&
+			user_cb->event == event) {
+			break;
+		}
+	}
+
+	/* create a new callback. */
+	if (user_cb == NULL)
+		user_cb = rte_zmalloc("INTR_USER_CALLBACK",
+					sizeof(struct rte_eth_dev_callback), 0);
+	if (user_cb != NULL) {
+		user_cb->cb_fn = cb_fn;
+		user_cb->cb_arg = cb_arg;
+		user_cb->event = event;
+		TAILQ_INSERT_TAIL(&(dev->link_intr_cbs), user_cb, next);
+	}
+
+	rte_spinlock_unlock(&rte_eth_dev_cb_lock);
+	return (user_cb == NULL) ? -ENOMEM : 0;
+}
+
+int
+rte_eth_dev_callback_unregister(uint8_t port_id,
+			enum rte_eth_event_type event,
+			rte_eth_dev_cb_fn cb_fn, void *cb_arg)
+{
+	int ret;
+	struct rte_eth_dev *dev;
+	struct rte_eth_dev_callback *cb, *next;
+
+	if (!cb_fn)
+		return -EINVAL;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
+
+	dev = &rte_eth_devices[port_id];
+	rte_spinlock_lock(&rte_eth_dev_cb_lock);
+
+	ret = 0;
+	for (cb = TAILQ_FIRST(&dev->link_intr_cbs); cb != NULL; cb = next) {
+
+		next = TAILQ_NEXT(cb, next);
+
+		if (cb->cb_fn != cb_fn || cb->event != event ||
+				(cb->cb_arg != (void *)-1 &&
+				cb->cb_arg != cb_arg))
+			continue;
+
+		/*
+		 * if this callback is not executing right now,
+		 * then remove it.
+		 */
+		if (cb->active == 0) {
+			TAILQ_REMOVE(&(dev->link_intr_cbs), cb, next);
+			rte_free(cb);
+		} else {
+			ret = -EAGAIN;
+		}
+	}
+
+	rte_spinlock_unlock(&rte_eth_dev_cb_lock);
+	return ret;
+}
+
+void
+_rte_eth_dev_callback_process(struct rte_eth_dev *dev,
+	enum rte_eth_event_type event)
+{
+	struct rte_eth_dev_callback *cb_lst;
+	struct rte_eth_dev_callback dev_cb;
+
+	rte_spinlock_lock(&rte_eth_dev_cb_lock);
+	TAILQ_FOREACH(cb_lst, &(dev->link_intr_cbs), next) {
+		if (cb_lst->cb_fn == NULL || cb_lst->event != event)
+			continue;
+		dev_cb = *cb_lst;
+		cb_lst->active = 1;
+		rte_spinlock_unlock(&rte_eth_dev_cb_lock);
+		dev_cb.cb_fn(dev->data->port_id, dev_cb.event,
+						dev_cb.cb_arg);
+		rte_spinlock_lock(&rte_eth_dev_cb_lock);
+		cb_lst->active = 0;
+	}
+	rte_spinlock_unlock(&rte_eth_dev_cb_lock);
+}
+
+int
+rte_eth_dev_rx_intr_ctl(uint8_t port_id, int epfd, int op, void *data)
+{
+	uint32_t vec;
+	struct rte_eth_dev *dev;
+	struct rte_intr_handle *intr_handle;
+	uint16_t qid;
+	int rc;
+
+	if (!rte_eth_dev_is_valid_port(port_id)) {
+		RTE_PMD_DEBUG_TRACE("Invalid port_id=%u\n", port_id);
+		return -ENODEV;
+	}
+
+	dev = &rte_eth_devices[port_id];
+	intr_handle = &dev->pci_dev->intr_handle;
+	if (!intr_handle->intr_vec) {
+		RTE_PMD_DEBUG_TRACE("RX Intr vector unset\n");
+		return -EPERM;
+	}
+
+	for (qid = 0; qid < dev->data->nb_rx_queues; qid++) {
+		vec = intr_handle->intr_vec[qid];
+		rc = rte_intr_rx_ctl(intr_handle, epfd, op, vec, data);
+		if (rc && rc != -EEXIST) {
+			RTE_PMD_DEBUG_TRACE("p %u q %u rx ctl error"
+					" op %d epfd %d vec %u\n",
+					port_id, qid, op, epfd, vec);
+		}
+	}
+
+	return 0;
+}
+
+const struct rte_memzone *
+rte_eth_dma_zone_reserve(const struct rte_eth_dev *dev, const char *ring_name,
+			 uint16_t queue_id, size_t size, unsigned align,
+			 int socket_id)
+{
+	char z_name[RTE_MEMZONE_NAMESIZE];
+	const struct rte_memzone *mz;
+
+	snprintf(z_name, sizeof(z_name), "%s_%s_%d_%d",
+		 dev->driver->pci_drv.name, ring_name,
+		 dev->data->port_id, queue_id);
+
+	mz = rte_memzone_lookup(z_name);
+	if (mz)
+		return mz;
+
+	if (rte_xen_dom0_supported())
+		return rte_memzone_reserve_bounded(z_name, size, socket_id,
+						   0, align, RTE_PGSIZE_2M);
+	else
+		return rte_memzone_reserve_aligned(z_name, size, socket_id,
+						   0, align);
+}
+
+int
+rte_eth_dev_rx_intr_ctl_q(uint8_t port_id, uint16_t queue_id,
+			  int epfd, int op, void *data)
+{
+	uint32_t vec;
+	struct rte_eth_dev *dev;
+	struct rte_intr_handle *intr_handle;
+	int rc;
+
+	if (!rte_eth_dev_is_valid_port(port_id)) {
+		RTE_PMD_DEBUG_TRACE("Invalid port_id=%u\n", port_id);
+		return -ENODEV;
+	}
+
+	dev = &rte_eth_devices[port_id];
+	if (queue_id >= dev->data->nb_rx_queues) {
+		RTE_PMD_DEBUG_TRACE("Invalid RX queue_id=%u\n", queue_id);
+		return -EINVAL;
+	}
+
+	intr_handle = &dev->pci_dev->intr_handle;
+	if (!intr_handle->intr_vec) {
+		RTE_PMD_DEBUG_TRACE("RX Intr vector unset\n");
+		return -EPERM;
+	}
+
+	vec = intr_handle->intr_vec[queue_id];
+	rc = rte_intr_rx_ctl(intr_handle, epfd, op, vec, data);
+	if (rc && rc != -EEXIST) {
+		RTE_PMD_DEBUG_TRACE("p %u q %u rx ctl error"
+				" op %d epfd %d vec %u\n",
+				port_id, queue_id, op, epfd, vec);
+		return rc;
+	}
+
+	return 0;
+}
+
+int
+rte_eth_dev_rx_intr_enable(uint8_t port_id,
+			   uint16_t queue_id)
+{
+	struct rte_eth_dev *dev;
+
+	if (!rte_eth_dev_is_valid_port(port_id)) {
+		RTE_PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+		return -ENODEV;
+	}
+
+	dev = &rte_eth_devices[port_id];
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_queue_intr_enable, -ENOTSUP);
+	return (*dev->dev_ops->rx_queue_intr_enable)(dev, queue_id);
+}
+
+int
+rte_eth_dev_rx_intr_disable(uint8_t port_id,
+			    uint16_t queue_id)
+{
+	struct rte_eth_dev *dev;
+
+	if (!rte_eth_dev_is_valid_port(port_id)) {
+		RTE_PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+		return -ENODEV;
+	}
+
+	dev = &rte_eth_devices[port_id];
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_queue_intr_disable, -ENOTSUP);
+	return (*dev->dev_ops->rx_queue_intr_disable)(dev, queue_id);
+}
+
+#ifdef RTE_NIC_BYPASS
+int rte_eth_dev_bypass_init(uint8_t port_id)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+	dev = &rte_eth_devices[port_id];
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->bypass_init, -ENOTSUP);
+	(*dev->dev_ops->bypass_init)(dev);
+	return 0;
+}
+
+int
+rte_eth_dev_bypass_state_show(uint8_t port_id, uint32_t *state)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+	dev = &rte_eth_devices[port_id];
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->bypass_state_show, -ENOTSUP);
+	(*dev->dev_ops->bypass_state_show)(dev, state);
+	return 0;
+}
+
+int
+rte_eth_dev_bypass_state_set(uint8_t port_id, uint32_t *new_state)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+	dev = &rte_eth_devices[port_id];
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->bypass_state_set, -ENOTSUP);
+	(*dev->dev_ops->bypass_state_set)(dev, new_state);
+	return 0;
+}
+
+int
+rte_eth_dev_bypass_event_show(uint8_t port_id, uint32_t event, uint32_t *state)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+	dev = &rte_eth_devices[port_id];
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->bypass_state_show, -ENOTSUP);
+	(*dev->dev_ops->bypass_event_show)(dev, event, state);
+	return 0;
+}
+
+int
+rte_eth_dev_bypass_event_store(uint8_t port_id, uint32_t event, uint32_t state)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+	dev = &rte_eth_devices[port_id];
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->bypass_event_set, -ENOTSUP);
+	(*dev->dev_ops->bypass_event_set)(dev, event, state);
+	return 0;
+}
+
+int
+rte_eth_dev_wd_timeout_store(uint8_t port_id, uint32_t timeout)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+	dev = &rte_eth_devices[port_id];
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->bypass_wd_timeout_set, -ENOTSUP);
+	(*dev->dev_ops->bypass_wd_timeout_set)(dev, timeout);
+	return 0;
+}
+
+int
+rte_eth_dev_bypass_ver_show(uint8_t port_id, uint32_t *ver)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+	dev = &rte_eth_devices[port_id];
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->bypass_ver_show, -ENOTSUP);
+	(*dev->dev_ops->bypass_ver_show)(dev, ver);
+	return 0;
+}
+
+int
+rte_eth_dev_bypass_wd_timeout_show(uint8_t port_id, uint32_t *wd_timeout)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+	dev = &rte_eth_devices[port_id];
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->bypass_wd_timeout_show, -ENOTSUP);
+	(*dev->dev_ops->bypass_wd_timeout_show)(dev, wd_timeout);
+	return 0;
+}
+
+int
+rte_eth_dev_bypass_wd_reset(uint8_t port_id)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+	dev = &rte_eth_devices[port_id];
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->bypass_wd_reset, -ENOTSUP);
+	(*dev->dev_ops->bypass_wd_reset)(dev);
+	return 0;
+}
+#endif
+
+int
+rte_eth_dev_filter_supported(uint8_t port_id, enum rte_filter_type filter_type)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+	dev = &rte_eth_devices[port_id];
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->filter_ctrl, -ENOTSUP);
+	return (*dev->dev_ops->filter_ctrl)(dev, filter_type,
+				RTE_ETH_FILTER_NOP, NULL);
+}
+
+int
+rte_eth_dev_filter_ctrl(uint8_t port_id, enum rte_filter_type filter_type,
+		       enum rte_filter_op filter_op, void *arg)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+	dev = &rte_eth_devices[port_id];
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->filter_ctrl, -ENOTSUP);
+	return (*dev->dev_ops->filter_ctrl)(dev, filter_type, filter_op, arg);
+}
+
+void *
+rte_eth_add_rx_callback(uint8_t port_id, uint16_t queue_id,
+		rte_rx_callback_fn fn, void *user_param)
+{
+#ifndef RTE_ETHDEV_RXTX_CALLBACKS
+	rte_errno = ENOTSUP;
+	return NULL;
+#endif
+	/* check input parameters */
+	if (!rte_eth_dev_is_valid_port(port_id) || fn == NULL ||
+		    queue_id >= rte_eth_devices[port_id].data->nb_rx_queues) {
+		rte_errno = EINVAL;
+		return NULL;
+	}
+
+	struct rte_eth_rxtx_callback *cb = rte_zmalloc(NULL, sizeof(*cb), 0);
+
+	if (cb == NULL) {
+		rte_errno = ENOMEM;
+		return NULL;
+	}
+
+	cb->fn.rx = fn;
+	cb->param = user_param;
+
+	/* Add the callbacks in fifo order. */
+	struct rte_eth_rxtx_callback *tail =
+		rte_eth_devices[port_id].post_rx_burst_cbs[queue_id];
+
+	if (!tail) {
+		rte_eth_devices[port_id].post_rx_burst_cbs[queue_id] = cb;
+
+	} else {
+		while (tail->next)
+			tail = tail->next;
+		tail->next = cb;
+	}
+
+	return cb;
+}
+
+void *
+rte_eth_add_tx_callback(uint8_t port_id, uint16_t queue_id,
+		rte_tx_callback_fn fn, void *user_param)
+{
+#ifndef RTE_ETHDEV_RXTX_CALLBACKS
+	rte_errno = ENOTSUP;
+	return NULL;
+#endif
+	/* check input parameters */
+	if (!rte_eth_dev_is_valid_port(port_id) || fn == NULL ||
+		    queue_id >= rte_eth_devices[port_id].data->nb_tx_queues) {
+		rte_errno = EINVAL;
+		return NULL;
+	}
+
+	struct rte_eth_rxtx_callback *cb = rte_zmalloc(NULL, sizeof(*cb), 0);
+
+	if (cb == NULL) {
+		rte_errno = ENOMEM;
+		return NULL;
+	}
+
+	cb->fn.tx = fn;
+	cb->param = user_param;
+
+	/* Add the callbacks in fifo order. */
+	struct rte_eth_rxtx_callback *tail =
+		rte_eth_devices[port_id].pre_tx_burst_cbs[queue_id];
+
+	if (!tail) {
+		rte_eth_devices[port_id].pre_tx_burst_cbs[queue_id] = cb;
+
+	} else {
+		while (tail->next)
+			tail = tail->next;
+		tail->next = cb;
+	}
+
+	return cb;
+}
+
+int
+rte_eth_remove_rx_callback(uint8_t port_id, uint16_t queue_id,
+		struct rte_eth_rxtx_callback *user_cb)
+{
+#ifndef RTE_ETHDEV_RXTX_CALLBACKS
+	return -ENOTSUP;
+#endif
+	/* Check input parameters. */
+	if (!rte_eth_dev_is_valid_port(port_id) || user_cb == NULL ||
+		    queue_id >= rte_eth_devices[port_id].data->nb_rx_queues) {
+		return -EINVAL;
+	}
+
+	struct rte_eth_dev *dev = &rte_eth_devices[port_id];
+	struct rte_eth_rxtx_callback *cb = dev->post_rx_burst_cbs[queue_id];
+	struct rte_eth_rxtx_callback *prev_cb;
+
+	/* Reset head pointer and remove user cb if first in the list. */
+	if (cb == user_cb) {
+		dev->post_rx_burst_cbs[queue_id] = user_cb->next;
+		return 0;
+	}
+
+	/* Remove the user cb from the callback list. */
+	do {
+		prev_cb = cb;
+		cb = cb->next;
+
+		if (cb == user_cb) {
+			prev_cb->next = user_cb->next;
+			return 0;
+		}
+
+	} while (cb != NULL);
+
+	/* Callback wasn't found. */
+	return -EINVAL;
+}
+
+int
+rte_eth_remove_tx_callback(uint8_t port_id, uint16_t queue_id,
+		struct rte_eth_rxtx_callback *user_cb)
+{
+#ifndef RTE_ETHDEV_RXTX_CALLBACKS
+	return -ENOTSUP;
+#endif
+	/* Check input parameters. */
+	if (!rte_eth_dev_is_valid_port(port_id) || user_cb == NULL ||
+		    queue_id >= rte_eth_devices[port_id].data->nb_tx_queues) {
+		return -EINVAL;
+	}
+
+	struct rte_eth_dev *dev = &rte_eth_devices[port_id];
+	struct rte_eth_rxtx_callback *cb = dev->pre_tx_burst_cbs[queue_id];
+	struct rte_eth_rxtx_callback *prev_cb;
+
+	/* Reset head pointer and remove user cb if first in the list. */
+	if (cb == user_cb) {
+		dev->pre_tx_burst_cbs[queue_id] = user_cb->next;
+		return 0;
+	}
+
+	/* Remove the user cb from the callback list. */
+	do {
+		prev_cb = cb;
+		cb = cb->next;
+
+		if (cb == user_cb) {
+			prev_cb->next = user_cb->next;
+			return 0;
+		}
+
+	} while (cb != NULL);
+
+	/* Callback wasn't found. */
+	return -EINVAL;
+}
+
+int
+rte_eth_rx_queue_info_get(uint8_t port_id, uint16_t queue_id,
+	struct rte_eth_rxq_info *qinfo)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+	if (qinfo == NULL)
+		return -EINVAL;
+
+	dev = &rte_eth_devices[port_id];
+	if (queue_id >= dev->data->nb_rx_queues) {
+		RTE_PMD_DEBUG_TRACE("Invalid RX queue_id=%d\n", queue_id);
+		return -EINVAL;
+	}
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rxq_info_get, -ENOTSUP);
+
+	memset(qinfo, 0, sizeof(*qinfo));
+	dev->dev_ops->rxq_info_get(dev, queue_id, qinfo);
+	return 0;
+}
+
+int
+rte_eth_tx_queue_info_get(uint8_t port_id, uint16_t queue_id,
+	struct rte_eth_txq_info *qinfo)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+	if (qinfo == NULL)
+		return -EINVAL;
+
+	dev = &rte_eth_devices[port_id];
+	if (queue_id >= dev->data->nb_tx_queues) {
+		RTE_PMD_DEBUG_TRACE("Invalid TX queue_id=%d\n", queue_id);
+		return -EINVAL;
+	}
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->txq_info_get, -ENOTSUP);
+
+	memset(qinfo, 0, sizeof(*qinfo));
+	dev->dev_ops->txq_info_get(dev, queue_id, qinfo);
+	return 0;
+}
+
+int
+rte_eth_dev_set_mc_addr_list(uint8_t port_id,
+			     struct ether_addr *mc_addr_set,
+			     uint32_t nb_mc_addr)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+	dev = &rte_eth_devices[port_id];
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->set_mc_addr_list, -ENOTSUP);
+	return dev->dev_ops->set_mc_addr_list(dev, mc_addr_set, nb_mc_addr);
+}
+
+int
+rte_eth_timesync_enable(uint8_t port_id)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+	dev = &rte_eth_devices[port_id];
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->timesync_enable, -ENOTSUP);
+	return (*dev->dev_ops->timesync_enable)(dev);
+}
+
+int
+rte_eth_timesync_disable(uint8_t port_id)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+	dev = &rte_eth_devices[port_id];
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->timesync_disable, -ENOTSUP);
+	return (*dev->dev_ops->timesync_disable)(dev);
+}
+
+int
+rte_eth_timesync_read_rx_timestamp(uint8_t port_id, struct timespec *timestamp,
+				   uint32_t flags)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+	dev = &rte_eth_devices[port_id];
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->timesync_read_rx_timestamp, -ENOTSUP);
+	return (*dev->dev_ops->timesync_read_rx_timestamp)(dev, timestamp, flags);
+}
+
+int
+rte_eth_timesync_read_tx_timestamp(uint8_t port_id, struct timespec *timestamp)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+	dev = &rte_eth_devices[port_id];
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->timesync_read_tx_timestamp, -ENOTSUP);
+	return (*dev->dev_ops->timesync_read_tx_timestamp)(dev, timestamp);
+}
+
+int
+rte_eth_timesync_adjust_time(uint8_t port_id, int64_t delta)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+	dev = &rte_eth_devices[port_id];
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->timesync_adjust_time, -ENOTSUP);
+	return (*dev->dev_ops->timesync_adjust_time)(dev, delta);
+}
+
+int
+rte_eth_timesync_read_time(uint8_t port_id, struct timespec *timestamp)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+	dev = &rte_eth_devices[port_id];
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->timesync_read_time, -ENOTSUP);
+	return (*dev->dev_ops->timesync_read_time)(dev, timestamp);
+}
+
+int
+rte_eth_timesync_write_time(uint8_t port_id, const struct timespec *timestamp)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+	dev = &rte_eth_devices[port_id];
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->timesync_write_time, -ENOTSUP);
+	return (*dev->dev_ops->timesync_write_time)(dev, timestamp);
+}
+
+int
+rte_eth_dev_get_reg_length(uint8_t port_id)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+	dev = &rte_eth_devices[port_id];
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->get_reg_length, -ENOTSUP);
+	return (*dev->dev_ops->get_reg_length)(dev);
+}
+
+int
+rte_eth_dev_get_reg_info(uint8_t port_id, struct rte_dev_reg_info *info)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+	dev = &rte_eth_devices[port_id];
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->get_reg, -ENOTSUP);
+	return (*dev->dev_ops->get_reg)(dev, info);
+}
+
+int
+rte_eth_dev_get_eeprom_length(uint8_t port_id)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+	dev = &rte_eth_devices[port_id];
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->get_eeprom_length, -ENOTSUP);
+	return (*dev->dev_ops->get_eeprom_length)(dev);
+}
+
+int
+rte_eth_dev_get_eeprom(uint8_t port_id, struct rte_dev_eeprom_info *info)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+	dev = &rte_eth_devices[port_id];
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->get_eeprom, -ENOTSUP);
+	return (*dev->dev_ops->get_eeprom)(dev, info);
+}
+
+int
+rte_eth_dev_set_eeprom(uint8_t port_id, struct rte_dev_eeprom_info *info)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+	dev = &rte_eth_devices[port_id];
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->set_eeprom, -ENOTSUP);
+	return (*dev->dev_ops->set_eeprom)(dev, info);
+}
+
+int
+rte_eth_dev_get_dcb_info(uint8_t port_id,
+			     struct rte_eth_dcb_info *dcb_info)
+{
+	struct rte_eth_dev *dev;
+
+	if (!rte_eth_dev_is_valid_port(port_id)) {
+		RTE_PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+		return -ENODEV;
+	}
+
+	dev = &rte_eth_devices[port_id];
+	memset(dcb_info, 0, sizeof(struct rte_eth_dcb_info));
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->get_dcb_info, -ENOTSUP);
+	return (*dev->dev_ops->get_dcb_info)(dev, dcb_info);
+}
+
+void
+rte_eth_copy_pci_info(struct rte_eth_dev *eth_dev, struct rte_pci_device *pci_dev)
+{
+	if ((eth_dev == NULL) || (pci_dev == NULL)) {
+		RTE_PMD_DEBUG_TRACE("NULL pointer eth_dev=%p pci_dev=%p\n",
+				eth_dev, pci_dev);
+		return;
+	}
+
+	eth_dev->data->dev_flags = 0;
+	if (pci_dev->driver->drv_flags & RTE_PCI_DRV_INTR_LSC)
+		eth_dev->data->dev_flags |= RTE_ETH_DEV_INTR_LSC;
+	if (pci_dev->driver->drv_flags & RTE_PCI_DRV_DETACHABLE)
+		eth_dev->data->dev_flags |= RTE_ETH_DEV_DETACHABLE;
+
+	eth_dev->data->kdrv = pci_dev->kdrv;
+	eth_dev->data->numa_node = pci_dev->numa_node;
+	eth_dev->data->drv_name = pci_dev->driver->name;
+}
+
+int
+rte_eth_dev_l2_tunnel_eth_type_conf(uint8_t port_id,
+				    struct rte_eth_l2_tunnel_conf *l2_tunnel)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+	if (l2_tunnel == NULL) {
+		RTE_PMD_DEBUG_TRACE("Invalid l2_tunnel parameter\n");
+		return -EINVAL;
+	}
+
+	if (l2_tunnel->l2_tunnel_type >= RTE_TUNNEL_TYPE_MAX) {
+		RTE_PMD_DEBUG_TRACE("Invalid tunnel type\n");
+		return -EINVAL;
+	}
+
+	dev = &rte_eth_devices[port_id];
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->l2_tunnel_eth_type_conf,
+				-ENOTSUP);
+	return (*dev->dev_ops->l2_tunnel_eth_type_conf)(dev, l2_tunnel);
+}
+
+int
+rte_eth_dev_l2_tunnel_offload_set(uint8_t port_id,
+				  struct rte_eth_l2_tunnel_conf *l2_tunnel,
+				  uint32_t mask,
+				  uint8_t en)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+	if (l2_tunnel == NULL) {
+		RTE_PMD_DEBUG_TRACE("Invalid l2_tunnel parameter\n");
+		return -EINVAL;
+	}
+
+	if (l2_tunnel->l2_tunnel_type >= RTE_TUNNEL_TYPE_MAX) {
+		RTE_PMD_DEBUG_TRACE("Invalid tunnel type.\n");
+		return -EINVAL;
+	}
+
+	if (mask == 0) {
+		RTE_PMD_DEBUG_TRACE("Mask should have a value.\n");
+		return -EINVAL;
+	}
+
+	dev = &rte_eth_devices[port_id];
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->l2_tunnel_offload_set,
+				-ENOTSUP);
+	return (*dev->dev_ops->l2_tunnel_offload_set)(dev, l2_tunnel, mask, en);
+}
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
new file mode 100644
index 00000000..022733ec
--- /dev/null
+++ b/lib/librte_ether/rte_ethdev.h
@@ -0,0 +1,4286 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_ETHDEV_H_
+#define _RTE_ETHDEV_H_
+
+/**
+ * @file
+ *
+ * RTE Ethernet Device API
+ *
+ * The Ethernet Device API is composed of two parts:
+ *
+ * - The application-oriented Ethernet API that includes functions to setup
+ *   an Ethernet device (configure it, setup its RX and TX queues and start it),
+ *   to get its MAC address, the speed and the status of its physical link,
+ *   to receive and to transmit packets, and so on.
+ *
+ * - The driver-oriented Ethernet API that exports a function allowing
+ *   an Ethernet Poll Mode Driver (PMD) to simultaneously register itself as
+ *   an Ethernet device driver and as a PCI driver for a set of matching PCI
+ *   [Ethernet] devices classes.
+ *
+ * By default, all the functions of the Ethernet Device API exported by a PMD
+ * are lock-free functions which assume to not be invoked in parallel on
+ * different logical cores to work on the same target object.  For instance,
+ * the receive function of a PMD cannot be invoked in parallel on two logical
+ * cores to poll the same RX queue [of the same port]. Of course, this function
+ * can be invoked in parallel by different logical cores on different RX queues.
+ * It is the responsibility of the upper level application to enforce this rule.
+ *
+ * If needed, parallel accesses by multiple logical cores to shared queues
+ * shall be explicitly protected by dedicated inline lock-aware functions
+ * built on top of their corresponding lock-free functions of the PMD API.
+ *
+ * In all functions of the Ethernet API, the Ethernet device is
+ * designated by an integer >= 0 named the device port identifier.
+ *
+ * At the Ethernet driver level, Ethernet devices are represented by a generic
+ * data structure of type *rte_eth_dev*.
+ *
+ * Ethernet devices are dynamically registered during the PCI probing phase
+ * performed at EAL initialization time.
+ * When an Ethernet device is being probed, an *rte_eth_dev* structure and
+ * a new port identifier are allocated for that device. Then, the eth_dev_init()
+ * function supplied by the Ethernet driver matching the probed PCI
+ * device is invoked to properly initialize the device.
+ *
+ * The role of the device init function consists of resetting the hardware,
+ * checking access to Non-volatile Memory (NVM), reading the MAC address
+ * from NVM etc.
+ *
+ * If the device init operation is successful, the correspondence between
+ * the port identifier assigned to the new device and its associated
+ * *rte_eth_dev* structure is effectively registered.
+ * Otherwise, both the *rte_eth_dev* structure and the port identifier are
+ * freed.
+ *
+ * The functions exported by the application Ethernet API to setup a device
+ * designated by its port identifier must be invoked in the following order:
+ *     - rte_eth_dev_configure()
+ *     - rte_eth_tx_queue_setup()
+ *     - rte_eth_rx_queue_setup()
+ *     - rte_eth_dev_start()
+ *
+ * Then, the network application can invoke, in any order, the functions
+ * exported by the Ethernet API to get the MAC address of a given device, to
+ * get the speed and the status of a device physical link, to receive/transmit
+ * [burst of] packets, and so on.
+ *
+ * If the application wants to change the configuration (i.e. call
+ * rte_eth_dev_configure(), rte_eth_tx_queue_setup(), or
+ * rte_eth_rx_queue_setup()), it must call rte_eth_dev_stop() first to stop the
+ * device and then do the reconfiguration before calling rte_eth_dev_start()
+ * again. The tramsit and receive functions should not be invoked when the
+ * device is stopped.
+ *
+ * Please note that some configuration is not stored between calls to
+ * rte_eth_dev_stop()/rte_eth_dev_start(). The following configuration will
+ * be retained:
+ *
+ *     - flow control settings
+ *     - receive mode configuration (promiscuous mode, hardware checksum mode,
+ *       RSS/VMDQ settings etc.)
+ *     - VLAN filtering configuration
+ *     - MAC addresses supplied to MAC address array
+ *     - flow director filtering mode (but not filtering rules)
+ *     - NIC queue statistics mappings
+ *
+ * Any other configuration will not be stored and will need to be re-entered
+ * after a call to rte_eth_dev_start().
+ *
+ * Finally, a network application can close an Ethernet device by invoking the
+ * rte_eth_dev_close() function.
+ *
+ * Each function of the application Ethernet API invokes a specific function
+ * of the PMD that controls the target device designated by its port
+ * identifier.
+ * For this purpose, all device-specific functions of an Ethernet driver are
+ * supplied through a set of pointers contained in a generic structure of type
+ * *eth_dev_ops*.
+ * The address of the *eth_dev_ops* structure is stored in the *rte_eth_dev*
+ * structure by the device init function of the Ethernet driver, which is
+ * invoked during the PCI probing phase, as explained earlier.
+ *
+ * In other words, each function of the Ethernet API simply retrieves the
+ * *rte_eth_dev* structure associated with the device port identifier and
+ * performs an indirect invocation of the corresponding driver function
+ * supplied in the *eth_dev_ops* structure of the *rte_eth_dev* structure.
+ *
+ * For performance reasons, the address of the burst-oriented RX and TX
+ * functions of the Ethernet driver are not contained in the *eth_dev_ops*
+ * structure. Instead, they are directly stored at the beginning of the
+ * *rte_eth_dev* structure to avoid an extra indirect memory access during
+ * their invocation.
+ *
+ * RTE ethernet device drivers do not use interrupts for transmitting or
+ * receiving. Instead, Ethernet drivers export Poll-Mode receive and transmit
+ * functions to applications.
+ * Both receive and transmit functions are packet-burst oriented to minimize
+ * their cost per packet through the following optimizations:
+ *
+ * - Sharing among multiple packets the incompressible cost of the
+ *   invocation of receive/transmit functions.
+ *
+ * - Enabling receive/transmit functions to take advantage of burst-oriented
+ *   hardware features (L1 cache, prefetch instructions, NIC head/tail
+ *   registers) to minimize the number of CPU cycles per packet, for instance,
+ *   by avoiding useless read memory accesses to ring descriptors, or by
+ *   systematically using arrays of pointers that exactly fit L1 cache line
+ *   boundaries and sizes.
+ *
+ * The burst-oriented receive function does not provide any error notification,
+ * to avoid the corresponding overhead. As a hint, the upper-level application
+ * might check the status of the device link once being systematically returned
+ * a 0 value by the receive function of the driver for a given number of tries.
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+#include <rte_dev.h>
+
+/* Use this macro to check if LRO API is supported */
+#define RTE_ETHDEV_HAS_LRO_SUPPORT
+
+#include <rte_log.h>
+#include <rte_interrupts.h>
+#include <rte_pci.h>
+#include <rte_dev.h>
+#include <rte_devargs.h>
+#include "rte_ether.h"
+#include "rte_eth_ctrl.h"
+#include "rte_dev_info.h"
+
+struct rte_mbuf;
+
+/**
+ * A structure used to retrieve statistics for an Ethernet port.
+ */
+struct rte_eth_stats {
+	uint64_t ipackets;  /**< Total number of successfully received packets. */
+	uint64_t opackets;  /**< Total number of successfully transmitted packets.*/
+	uint64_t ibytes;    /**< Total number of successfully received bytes. */
+	uint64_t obytes;    /**< Total number of successfully transmitted bytes. */
+	uint64_t imissed;
+	/**< Total of RX packets dropped by the HW,
+	 * because there are no available mbufs (i.e. RX queues are full).
+	 */
+	uint64_t ibadcrc __rte_deprecated;
+	/**< Deprecated; Total of RX packets with CRC error. */
+	uint64_t ibadlen __rte_deprecated;
+	/**< Deprecated; Total of RX packets with bad length. */
+	uint64_t ierrors;   /**< Total number of erroneous received packets. */
+	uint64_t oerrors;   /**< Total number of failed transmitted packets. */
+	uint64_t imcasts;
+	/**< Deprecated; Total number of multicast received packets. */
+	uint64_t rx_nombuf; /**< Total number of RX mbuf allocation failures. */
+	uint64_t fdirmatch __rte_deprecated;
+	/**< Deprecated; Total number of RX packets matching a filter. */
+	uint64_t fdirmiss __rte_deprecated;
+	/**< Deprecated; Total number of RX packets not matching any filter. */
+	uint64_t tx_pause_xon __rte_deprecated;
+	 /**< Deprecated; Total nb. of XON pause frame sent. */
+	uint64_t rx_pause_xon __rte_deprecated;
+	/**< Deprecated; Total nb. of XON pause frame received. */
+	uint64_t tx_pause_xoff __rte_deprecated;
+	/**< Deprecated; Total nb. of XOFF pause frame sent. */
+	uint64_t rx_pause_xoff __rte_deprecated;
+	/**< Deprecated; Total nb. of XOFF pause frame received. */
+	uint64_t q_ipackets[RTE_ETHDEV_QUEUE_STAT_CNTRS];
+	/**< Total number of queue RX packets. */
+	uint64_t q_opackets[RTE_ETHDEV_QUEUE_STAT_CNTRS];
+	/**< Total number of queue TX packets. */
+	uint64_t q_ibytes[RTE_ETHDEV_QUEUE_STAT_CNTRS];
+	/**< Total number of successfully received queue bytes. */
+	uint64_t q_obytes[RTE_ETHDEV_QUEUE_STAT_CNTRS];
+	/**< Total number of successfully transmitted queue bytes. */
+	uint64_t q_errors[RTE_ETHDEV_QUEUE_STAT_CNTRS];
+	/**< Total number of queue packets received that are dropped. */
+	uint64_t ilbpackets;
+	/**< Total number of good packets received from loopback,VF Only */
+	uint64_t olbpackets;
+	/**< Total number of good packets transmitted to loopback,VF Only */
+	uint64_t ilbbytes;
+	/**< Total number of good bytes received from loopback,VF Only */
+	uint64_t olbbytes;
+	/**< Total number of good bytes transmitted to loopback,VF Only */
+};
+
+/**
+ * Device supported speeds bitmap flags
+ */
+#define ETH_LINK_SPEED_AUTONEG  (0 <<  0)  /**< Autonegotiate (all speeds) */
+#define ETH_LINK_SPEED_FIXED    (1 <<  0)  /**< Disable autoneg (fixed speed) */
+#define ETH_LINK_SPEED_10M_HD   (1 <<  1)  /**<  10 Mbps half-duplex */
+#define ETH_LINK_SPEED_10M      (1 <<  2)  /**<  10 Mbps full-duplex */
+#define ETH_LINK_SPEED_100M_HD  (1 <<  3)  /**< 100 Mbps half-duplex */
+#define ETH_LINK_SPEED_100M     (1 <<  4)  /**< 100 Mbps full-duplex */
+#define ETH_LINK_SPEED_1G       (1 <<  5)  /**<   1 Gbps */
+#define ETH_LINK_SPEED_2_5G     (1 <<  6)  /**< 2.5 Gbps */
+#define ETH_LINK_SPEED_5G       (1 <<  7)  /**<   5 Gbps */
+#define ETH_LINK_SPEED_10G      (1 <<  8)  /**<  10 Gbps */
+#define ETH_LINK_SPEED_20G      (1 <<  9)  /**<  20 Gbps */
+#define ETH_LINK_SPEED_25G      (1 << 10)  /**<  25 Gbps */
+#define ETH_LINK_SPEED_40G      (1 << 11)  /**<  40 Gbps */
+#define ETH_LINK_SPEED_50G      (1 << 12)  /**<  50 Gbps */
+#define ETH_LINK_SPEED_56G      (1 << 13)  /**<  56 Gbps */
+#define ETH_LINK_SPEED_100G     (1 << 14)  /**< 100 Gbps */
+
+/**
+ * Ethernet numeric link speeds in Mbps
+ */
+#define ETH_SPEED_NUM_NONE         0 /**< Not defined */
+#define ETH_SPEED_NUM_10M         10 /**<  10 Mbps */
+#define ETH_SPEED_NUM_100M       100 /**< 100 Mbps */
+#define ETH_SPEED_NUM_1G        1000 /**<   1 Gbps */
+#define ETH_SPEED_NUM_2_5G      2500 /**< 2.5 Gbps */
+#define ETH_SPEED_NUM_5G        5000 /**<   5 Gbps */
+#define ETH_SPEED_NUM_10G      10000 /**<  10 Gbps */
+#define ETH_SPEED_NUM_20G      20000 /**<  20 Gbps */
+#define ETH_SPEED_NUM_25G      25000 /**<  25 Gbps */
+#define ETH_SPEED_NUM_40G      40000 /**<  40 Gbps */
+#define ETH_SPEED_NUM_50G      50000 /**<  50 Gbps */
+#define ETH_SPEED_NUM_56G      56000 /**<  56 Gbps */
+#define ETH_SPEED_NUM_100G    100000 /**< 100 Gbps */
+
+/**
+ * A structure used to retrieve link-level information of an Ethernet port.
+ */
+struct rte_eth_link {
+	uint32_t link_speed;        /**< ETH_SPEED_NUM_ */
+	uint16_t link_duplex  : 1;  /**< ETH_LINK_[HALF/FULL]_DUPLEX */
+	uint16_t link_autoneg : 1;  /**< ETH_LINK_SPEED_[AUTONEG/FIXED] */
+	uint16_t link_status  : 1;  /**< ETH_LINK_[DOWN/UP] */
+} __attribute__((aligned(8)));      /**< aligned for atomic64 read/write */
+
+/* Utility constants */
+#define ETH_LINK_HALF_DUPLEX    0 /**< Half-duplex connection. */
+#define ETH_LINK_FULL_DUPLEX    1 /**< Full-duplex connection. */
+#define ETH_LINK_DOWN           0 /**< Link is down. */
+#define ETH_LINK_UP             1 /**< Link is up. */
+#define ETH_LINK_FIXED          0 /**< No autonegotiation. */
+#define ETH_LINK_AUTONEG        1 /**< Autonegotiated. */
+
+/**
+ * A structure used to configure the ring threshold registers of an RX/TX
+ * queue for an Ethernet port.
+ */
+struct rte_eth_thresh {
+	uint8_t pthresh; /**< Ring prefetch threshold. */
+	uint8_t hthresh; /**< Ring host threshold. */
+	uint8_t wthresh; /**< Ring writeback threshold. */
+};
+
+/**
+ *  Simple flags are used for rte_eth_conf.rxmode.mq_mode.
+ */
+#define ETH_MQ_RX_RSS_FLAG  0x1
+#define ETH_MQ_RX_DCB_FLAG  0x2
+#define ETH_MQ_RX_VMDQ_FLAG 0x4
+
+/**
+ *  A set of values to identify what method is to be used to route
+ *  packets to multiple queues.
+ */
+enum rte_eth_rx_mq_mode {
+	/** None of DCB,RSS or VMDQ mode */
+	ETH_MQ_RX_NONE = 0,
+
+	/** For RX side, only RSS is on */
+	ETH_MQ_RX_RSS = ETH_MQ_RX_RSS_FLAG,
+	/** For RX side,only DCB is on. */
+	ETH_MQ_RX_DCB = ETH_MQ_RX_DCB_FLAG,
+	/** Both DCB and RSS enable */
+	ETH_MQ_RX_DCB_RSS = ETH_MQ_RX_RSS_FLAG | ETH_MQ_RX_DCB_FLAG,
+
+	/** Only VMDQ, no RSS nor DCB */
+	ETH_MQ_RX_VMDQ_ONLY = ETH_MQ_RX_VMDQ_FLAG,
+	/** RSS mode with VMDQ */
+	ETH_MQ_RX_VMDQ_RSS = ETH_MQ_RX_RSS_FLAG | ETH_MQ_RX_VMDQ_FLAG,
+	/** Use VMDQ+DCB to route traffic to queues */
+	ETH_MQ_RX_VMDQ_DCB = ETH_MQ_RX_VMDQ_FLAG | ETH_MQ_RX_DCB_FLAG,
+	/** Enable both VMDQ and DCB in VMDq */
+	ETH_MQ_RX_VMDQ_DCB_RSS = ETH_MQ_RX_RSS_FLAG | ETH_MQ_RX_DCB_FLAG |
+				 ETH_MQ_RX_VMDQ_FLAG,
+};
+
+/**
+ * for rx mq mode backward compatible
+ */
+#define ETH_RSS                       ETH_MQ_RX_RSS
+#define VMDQ_DCB                      ETH_MQ_RX_VMDQ_DCB
+#define ETH_DCB_RX                    ETH_MQ_RX_DCB
+
+/**
+ * A set of values to identify what method is to be used to transmit
+ * packets using multi-TCs.
+ */
+enum rte_eth_tx_mq_mode {
+	ETH_MQ_TX_NONE    = 0,  /**< It is in neither DCB nor VT mode. */
+	ETH_MQ_TX_DCB,          /**< For TX side,only DCB is on. */
+	ETH_MQ_TX_VMDQ_DCB,	/**< For TX side,both DCB and VT is on. */
+	ETH_MQ_TX_VMDQ_ONLY,    /**< Only VT on, no DCB */
+};
+
+/**
+ * for tx mq mode backward compatible
+ */
+#define ETH_DCB_NONE                ETH_MQ_TX_NONE
+#define ETH_VMDQ_DCB_TX             ETH_MQ_TX_VMDQ_DCB
+#define ETH_DCB_TX                  ETH_MQ_TX_DCB
+
+/**
+ * A structure used to configure the RX features of an Ethernet port.
+ */
+struct rte_eth_rxmode {
+	/** The multi-queue packet distribution mode to be used, e.g. RSS. */
+	enum rte_eth_rx_mq_mode mq_mode;
+	uint32_t max_rx_pkt_len;  /**< Only used if jumbo_frame enabled. */
+	uint16_t split_hdr_size;  /**< hdr buf size (header_split enabled).*/
+	uint16_t header_split : 1, /**< Header Split enable. */
+		hw_ip_checksum   : 1, /**< IP/UDP/TCP checksum offload enable. */
+		hw_vlan_filter   : 1, /**< VLAN filter enable. */
+		hw_vlan_strip    : 1, /**< VLAN strip enable. */
+		hw_vlan_extend   : 1, /**< Extended VLAN enable. */
+		jumbo_frame      : 1, /**< Jumbo Frame Receipt enable. */
+		hw_strip_crc     : 1, /**< Enable CRC stripping by hardware. */
+		enable_scatter   : 1, /**< Enable scatter packets rx handler */
+		enable_lro       : 1; /**< Enable LRO */
+};
+
+/**
+ * VLAN types to indicate if it is for single VLAN, inner VLAN or outer VLAN.
+ * Note that single VLAN is treated the same as inner VLAN.
+ */
+enum rte_vlan_type {
+	ETH_VLAN_TYPE_UNKNOWN = 0,
+	ETH_VLAN_TYPE_INNER, /**< Single VLAN, or inner VLAN. */
+	ETH_VLAN_TYPE_OUTER, /**< Outer VLAN. */
+	ETH_VLAN_TYPE_MAX,
+};
+
+/**
+ * A structure used to configure the Receive Side Scaling (RSS) feature
+ * of an Ethernet port.
+ * If not NULL, the *rss_key* pointer of the *rss_conf* structure points
+ * to an array holding the RSS key to use for hashing specific header
+ * fields of received packets. The length of this array should be indicated
+ * by *rss_key_len* below. Otherwise, a default random hash key is used by
+ * the device driver.
+ *
+ * The *rss_key_len* field of the *rss_conf* structure indicates the length
+ * in bytes of the array pointed by *rss_key*. To be compatible, this length
+ * will be checked in i40e only. Others assume 40 bytes to be used as before.
+ *
+ * The *rss_hf* field of the *rss_conf* structure indicates the different
+ * types of IPv4/IPv6 packets to which the RSS hashing must be applied.
+ * Supplying an *rss_hf* equal to zero disables the RSS feature.
+ */
+struct rte_eth_rss_conf {
+	uint8_t *rss_key;    /**< If not NULL, 40-byte hash key. */
+	uint8_t rss_key_len; /**< hash key length in bytes. */
+	uint64_t rss_hf;     /**< Hash functions to apply - see below. */
+};
+
+/*
+ * The RSS offload types are defined based on flow types which are defined
+ * in rte_eth_ctrl.h. Different NIC hardwares may support different RSS offload
+ * types. The supported flow types or RSS offload types can be queried by
+ * rte_eth_dev_info_get().
+ */
+#define ETH_RSS_IPV4               (1ULL << RTE_ETH_FLOW_IPV4)
+#define ETH_RSS_FRAG_IPV4          (1ULL << RTE_ETH_FLOW_FRAG_IPV4)
+#define ETH_RSS_NONFRAG_IPV4_TCP   (1ULL << RTE_ETH_FLOW_NONFRAG_IPV4_TCP)
+#define ETH_RSS_NONFRAG_IPV4_UDP   (1ULL << RTE_ETH_FLOW_NONFRAG_IPV4_UDP)
+#define ETH_RSS_NONFRAG_IPV4_SCTP  (1ULL << RTE_ETH_FLOW_NONFRAG_IPV4_SCTP)
+#define ETH_RSS_NONFRAG_IPV4_OTHER (1ULL << RTE_ETH_FLOW_NONFRAG_IPV4_OTHER)
+#define ETH_RSS_IPV6               (1ULL << RTE_ETH_FLOW_IPV6)
+#define ETH_RSS_FRAG_IPV6          (1ULL << RTE_ETH_FLOW_FRAG_IPV6)
+#define ETH_RSS_NONFRAG_IPV6_TCP   (1ULL << RTE_ETH_FLOW_NONFRAG_IPV6_TCP)
+#define ETH_RSS_NONFRAG_IPV6_UDP   (1ULL << RTE_ETH_FLOW_NONFRAG_IPV6_UDP)
+#define ETH_RSS_NONFRAG_IPV6_SCTP  (1ULL << RTE_ETH_FLOW_NONFRAG_IPV6_SCTP)
+#define ETH_RSS_NONFRAG_IPV6_OTHER (1ULL << RTE_ETH_FLOW_NONFRAG_IPV6_OTHER)
+#define ETH_RSS_L2_PAYLOAD         (1ULL << RTE_ETH_FLOW_L2_PAYLOAD)
+#define ETH_RSS_IPV6_EX            (1ULL << RTE_ETH_FLOW_IPV6_EX)
+#define ETH_RSS_IPV6_TCP_EX        (1ULL << RTE_ETH_FLOW_IPV6_TCP_EX)
+#define ETH_RSS_IPV6_UDP_EX        (1ULL << RTE_ETH_FLOW_IPV6_UDP_EX)
+
+#define ETH_RSS_IP ( \
+	ETH_RSS_IPV4 | \
+	ETH_RSS_FRAG_IPV4 | \
+	ETH_RSS_NONFRAG_IPV4_OTHER | \
+	ETH_RSS_IPV6 | \
+	ETH_RSS_FRAG_IPV6 | \
+	ETH_RSS_NONFRAG_IPV6_OTHER | \
+	ETH_RSS_IPV6_EX)
+
+#define ETH_RSS_UDP ( \
+	ETH_RSS_NONFRAG_IPV4_UDP | \
+	ETH_RSS_NONFRAG_IPV6_UDP | \
+	ETH_RSS_IPV6_UDP_EX)
+
+#define ETH_RSS_TCP ( \
+	ETH_RSS_NONFRAG_IPV4_TCP | \
+	ETH_RSS_NONFRAG_IPV6_TCP | \
+	ETH_RSS_IPV6_TCP_EX)
+
+#define ETH_RSS_SCTP ( \
+	ETH_RSS_NONFRAG_IPV4_SCTP | \
+	ETH_RSS_NONFRAG_IPV6_SCTP)
+
+/**< Mask of valid RSS hash protocols */
+#define ETH_RSS_PROTO_MASK ( \
+	ETH_RSS_IPV4 | \
+	ETH_RSS_FRAG_IPV4 | \
+	ETH_RSS_NONFRAG_IPV4_TCP | \
+	ETH_RSS_NONFRAG_IPV4_UDP | \
+	ETH_RSS_NONFRAG_IPV4_SCTP | \
+	ETH_RSS_NONFRAG_IPV4_OTHER | \
+	ETH_RSS_IPV6 | \
+	ETH_RSS_FRAG_IPV6 | \
+	ETH_RSS_NONFRAG_IPV6_TCP | \
+	ETH_RSS_NONFRAG_IPV6_UDP | \
+	ETH_RSS_NONFRAG_IPV6_SCTP | \
+	ETH_RSS_NONFRAG_IPV6_OTHER | \
+	ETH_RSS_L2_PAYLOAD | \
+	ETH_RSS_IPV6_EX | \
+	ETH_RSS_IPV6_TCP_EX | \
+	ETH_RSS_IPV6_UDP_EX)
+
+/*
+ * Definitions used for redirection table entry size.
+ * Some RSS RETA sizes may not be supported by some drivers, check the
+ * documentation or the description of relevant functions for more details.
+ */
+#define ETH_RSS_RETA_SIZE_64  64
+#define ETH_RSS_RETA_SIZE_128 128
+#define ETH_RSS_RETA_SIZE_512 512
+#define RTE_RETA_GROUP_SIZE   64
+
+/* Definitions used for VMDQ and DCB functionality */
+#define ETH_VMDQ_MAX_VLAN_FILTERS   64 /**< Maximum nb. of VMDQ vlan filters. */
+#define ETH_DCB_NUM_USER_PRIORITIES 8  /**< Maximum nb. of DCB priorities. */
+#define ETH_VMDQ_DCB_NUM_QUEUES     128 /**< Maximum nb. of VMDQ DCB queues. */
+#define ETH_DCB_NUM_QUEUES          128 /**< Maximum nb. of DCB queues. */
+
+/* DCB capability defines */
+#define ETH_DCB_PG_SUPPORT      0x00000001 /**< Priority Group(ETS) support. */
+#define ETH_DCB_PFC_SUPPORT     0x00000002 /**< Priority Flow Control support. */
+
+/* Definitions used for VLAN Offload functionality */
+#define ETH_VLAN_STRIP_OFFLOAD   0x0001 /**< VLAN Strip  On/Off */
+#define ETH_VLAN_FILTER_OFFLOAD  0x0002 /**< VLAN Filter On/Off */
+#define ETH_VLAN_EXTEND_OFFLOAD  0x0004 /**< VLAN Extend On/Off */
+
+/* Definitions used for mask VLAN setting */
+#define ETH_VLAN_STRIP_MASK   0x0001 /**< VLAN Strip  setting mask */
+#define ETH_VLAN_FILTER_MASK  0x0002 /**< VLAN Filter  setting mask*/
+#define ETH_VLAN_EXTEND_MASK  0x0004 /**< VLAN Extend  setting mask*/
+#define ETH_VLAN_ID_MAX       0x0FFF /**< VLAN ID is in lower 12 bits*/
+
+/* Definitions used for receive MAC address   */
+#define ETH_NUM_RECEIVE_MAC_ADDR  128 /**< Maximum nb. of receive mac addr. */
+
+/* Definitions used for unicast hash  */
+#define ETH_VMDQ_NUM_UC_HASH_ARRAY  128 /**< Maximum nb. of UC hash array. */
+
+/* Definitions used for VMDQ pool rx mode setting */
+#define ETH_VMDQ_ACCEPT_UNTAG   0x0001 /**< accept untagged packets. */
+#define ETH_VMDQ_ACCEPT_HASH_MC 0x0002 /**< accept packets in multicast table . */
+#define ETH_VMDQ_ACCEPT_HASH_UC 0x0004 /**< accept packets in unicast table. */
+#define ETH_VMDQ_ACCEPT_BROADCAST   0x0008 /**< accept broadcast packets. */
+#define ETH_VMDQ_ACCEPT_MULTICAST   0x0010 /**< multicast promiscuous. */
+
+/** Maximum nb. of vlan per mirror rule */
+#define ETH_MIRROR_MAX_VLANS       64
+
+#define ETH_MIRROR_VIRTUAL_POOL_UP     0x01  /**< Virtual Pool uplink Mirroring. */
+#define ETH_MIRROR_UPLINK_PORT         0x02  /**< Uplink Port Mirroring. */
+#define ETH_MIRROR_DOWNLINK_PORT       0x04  /**< Downlink Port Mirroring. */
+#define ETH_MIRROR_VLAN                0x08  /**< VLAN Mirroring. */
+#define ETH_MIRROR_VIRTUAL_POOL_DOWN   0x10  /**< Virtual Pool downlink Mirroring. */
+
+/**
+ * A structure used to configure VLAN traffic mirror of an Ethernet port.
+ */
+struct rte_eth_vlan_mirror {
+	uint64_t vlan_mask; /**< mask for valid VLAN ID. */
+	/** VLAN ID list for vlan mirroring. */
+	uint16_t vlan_id[ETH_MIRROR_MAX_VLANS];
+};
+
+/**
+ * A structure used to configure traffic mirror of an Ethernet port.
+ */
+struct rte_eth_mirror_conf {
+	uint8_t rule_type; /**< Mirroring rule type */
+	uint8_t dst_pool;  /**< Destination pool for this mirror rule. */
+	uint64_t pool_mask; /**< Bitmap of pool for pool mirroring */
+	/** VLAN ID setting for VLAN mirroring. */
+	struct rte_eth_vlan_mirror vlan;
+};
+
+/**
+ * A structure used to configure 64 entries of Redirection Table of the
+ * Receive Side Scaling (RSS) feature of an Ethernet port. To configure
+ * more than 64 entries supported by hardware, an array of this structure
+ * is needed.
+ */
+struct rte_eth_rss_reta_entry64 {
+	uint64_t mask;
+	/**< Mask bits indicate which entries need to be updated/queried. */
+	uint16_t reta[RTE_RETA_GROUP_SIZE];
+	/**< Group of 64 redirection table entries. */
+};
+
+/**
+ * This enum indicates the possible number of traffic classes
+ * in DCB configratioins
+ */
+enum rte_eth_nb_tcs {
+	ETH_4_TCS = 4, /**< 4 TCs with DCB. */
+	ETH_8_TCS = 8  /**< 8 TCs with DCB. */
+};
+
+/**
+ * This enum indicates the possible number of queue pools
+ * in VMDQ configurations.
+ */
+enum rte_eth_nb_pools {
+	ETH_8_POOLS = 8,    /**< 8 VMDq pools. */
+	ETH_16_POOLS = 16,  /**< 16 VMDq pools. */
+	ETH_32_POOLS = 32,  /**< 32 VMDq pools. */
+	ETH_64_POOLS = 64   /**< 64 VMDq pools. */
+};
+
+/* This structure may be extended in future. */
+struct rte_eth_dcb_rx_conf {
+	enum rte_eth_nb_tcs nb_tcs; /**< Possible DCB TCs, 4 or 8 TCs */
+	/** Traffic class each UP mapped to. */
+	uint8_t dcb_tc[ETH_DCB_NUM_USER_PRIORITIES];
+};
+
+struct rte_eth_vmdq_dcb_tx_conf {
+	enum rte_eth_nb_pools nb_queue_pools; /**< With DCB, 16 or 32 pools. */
+	/** Traffic class each UP mapped to. */
+	uint8_t dcb_tc[ETH_DCB_NUM_USER_PRIORITIES];
+};
+
+struct rte_eth_dcb_tx_conf {
+	enum rte_eth_nb_tcs nb_tcs; /**< Possible DCB TCs, 4 or 8 TCs. */
+	/** Traffic class each UP mapped to. */
+	uint8_t dcb_tc[ETH_DCB_NUM_USER_PRIORITIES];
+};
+
+struct rte_eth_vmdq_tx_conf {
+	enum rte_eth_nb_pools nb_queue_pools; /**< VMDq mode, 64 pools. */
+};
+
+/**
+ * A structure used to configure the VMDQ+DCB feature
+ * of an Ethernet port.
+ *
+ * Using this feature, packets are routed to a pool of queues, based
+ * on the vlan id in the vlan tag, and then to a specific queue within
+ * that pool, using the user priority vlan tag field.
+ *
+ * A default pool may be used, if desired, to route all traffic which
+ * does not match the vlan filter rules.
+ */
+struct rte_eth_vmdq_dcb_conf {
+	enum rte_eth_nb_pools nb_queue_pools; /**< With DCB, 16 or 32 pools */
+	uint8_t enable_default_pool; /**< If non-zero, use a default pool */
+	uint8_t default_pool; /**< The default pool, if applicable */
+	uint8_t nb_pool_maps; /**< We can have up to 64 filters/mappings */
+	struct {
+		uint16_t vlan_id; /**< The vlan id of the received frame */
+		uint64_t pools;   /**< Bitmask of pools for packet rx */
+	} pool_map[ETH_VMDQ_MAX_VLAN_FILTERS]; /**< VMDq vlan pool maps. */
+	uint8_t dcb_tc[ETH_DCB_NUM_USER_PRIORITIES];
+	/**< Selects a queue in a pool */
+};
+
+struct rte_eth_vmdq_rx_conf {
+	enum rte_eth_nb_pools nb_queue_pools; /**< VMDq only mode, 8 or 64 pools */
+	uint8_t enable_default_pool; /**< If non-zero, use a default pool */
+	uint8_t default_pool; /**< The default pool, if applicable */
+	uint8_t enable_loop_back; /**< Enable VT loop back */
+	uint8_t nb_pool_maps; /**< We can have up to 64 filters/mappings */
+	uint32_t rx_mode; /**< Flags from ETH_VMDQ_ACCEPT_* */
+	struct {
+		uint16_t vlan_id; /**< The vlan id of the received frame */
+		uint64_t pools;   /**< Bitmask of pools for packet rx */
+	} pool_map[ETH_VMDQ_MAX_VLAN_FILTERS]; /**< VMDq vlan pool maps. */
+};
+
+/**
+ * A structure used to configure the TX features of an Ethernet port.
+ */
+struct rte_eth_txmode {
+	enum rte_eth_tx_mq_mode mq_mode; /**< TX multi-queues mode. */
+
+	/* For i40e specifically */
+	uint16_t pvid;
+	uint8_t hw_vlan_reject_tagged : 1,
+		/**< If set, reject sending out tagged pkts */
+		hw_vlan_reject_untagged : 1,
+		/**< If set, reject sending out untagged pkts */
+		hw_vlan_insert_pvid : 1;
+		/**< If set, enable port based VLAN insertion */
+};
+
+/**
+ * A structure used to configure an RX ring of an Ethernet port.
+ */
+struct rte_eth_rxconf {
+	struct rte_eth_thresh rx_thresh; /**< RX ring threshold registers. */
+	uint16_t rx_free_thresh; /**< Drives the freeing of RX descriptors. */
+	uint8_t rx_drop_en; /**< Drop packets if no descriptors are available. */
+	uint8_t rx_deferred_start; /**< Do not start queue with rte_eth_dev_start(). */
+};
+
+#define ETH_TXQ_FLAGS_NOMULTSEGS 0x0001 /**< nb_segs=1 for all mbufs */
+#define ETH_TXQ_FLAGS_NOREFCOUNT 0x0002 /**< refcnt can be ignored */
+#define ETH_TXQ_FLAGS_NOMULTMEMP 0x0004 /**< all bufs come from same mempool */
+#define ETH_TXQ_FLAGS_NOVLANOFFL 0x0100 /**< disable VLAN offload */
+#define ETH_TXQ_FLAGS_NOXSUMSCTP 0x0200 /**< disable SCTP checksum offload */
+#define ETH_TXQ_FLAGS_NOXSUMUDP  0x0400 /**< disable UDP checksum offload */
+#define ETH_TXQ_FLAGS_NOXSUMTCP  0x0800 /**< disable TCP checksum offload */
+#define ETH_TXQ_FLAGS_NOOFFLOADS \
+		(ETH_TXQ_FLAGS_NOVLANOFFL | ETH_TXQ_FLAGS_NOXSUMSCTP | \
+		 ETH_TXQ_FLAGS_NOXSUMUDP  | ETH_TXQ_FLAGS_NOXSUMTCP)
+#define ETH_TXQ_FLAGS_NOXSUMS \
+		(ETH_TXQ_FLAGS_NOXSUMSCTP | ETH_TXQ_FLAGS_NOXSUMUDP | \
+		 ETH_TXQ_FLAGS_NOXSUMTCP)
+/**
+ * A structure used to configure a TX ring of an Ethernet port.
+ */
+struct rte_eth_txconf {
+	struct rte_eth_thresh tx_thresh; /**< TX ring threshold registers. */
+	uint16_t tx_rs_thresh; /**< Drives the setting of RS bit on TXDs. */
+	uint16_t tx_free_thresh; /**< Start freeing TX buffers if there are
+				      less free descriptors than this value. */
+
+	uint32_t txq_flags; /**< Set flags for the Tx queue */
+	uint8_t tx_deferred_start; /**< Do not start queue with rte_eth_dev_start(). */
+};
+
+/**
+ * A structure contains information about HW descriptor ring limitations.
+ */
+struct rte_eth_desc_lim {
+	uint16_t nb_max;   /**< Max allowed number of descriptors. */
+	uint16_t nb_min;   /**< Min allowed number of descriptors. */
+	uint16_t nb_align; /**< Number of descriptors should be aligned to. */
+};
+
+/**
+ * This enum indicates the flow control mode
+ */
+enum rte_eth_fc_mode {
+	RTE_FC_NONE = 0, /**< Disable flow control. */
+	RTE_FC_RX_PAUSE, /**< RX pause frame, enable flowctrl on TX side. */
+	RTE_FC_TX_PAUSE, /**< TX pause frame, enable flowctrl on RX side. */
+	RTE_FC_FULL      /**< Enable flow control on both side. */
+};
+
+/**
+ * A structure used to configure Ethernet flow control parameter.
+ * These parameters will be configured into the register of the NIC.
+ * Please refer to the corresponding data sheet for proper value.
+ */
+struct rte_eth_fc_conf {
+	uint32_t high_water;  /**< High threshold value to trigger XOFF */
+	uint32_t low_water;   /**< Low threshold value to trigger XON */
+	uint16_t pause_time;  /**< Pause quota in the Pause frame */
+	uint16_t send_xon;    /**< Is XON frame need be sent */
+	enum rte_eth_fc_mode mode;  /**< Link flow control mode */
+	uint8_t mac_ctrl_frame_fwd; /**< Forward MAC control frames */
+	uint8_t autoneg;      /**< Use Pause autoneg */
+};
+
+/**
+ * A structure used to configure Ethernet priority flow control parameter.
+ * These parameters will be configured into the register of the NIC.
+ * Please refer to the corresponding data sheet for proper value.
+ */
+struct rte_eth_pfc_conf {
+	struct rte_eth_fc_conf fc; /**< General flow control parameter. */
+	uint8_t priority;          /**< VLAN User Priority. */
+};
+
+/**
+ *  Memory space that can be configured to store Flow Director filters
+ *  in the board memory.
+ */
+enum rte_fdir_pballoc_type {
+	RTE_FDIR_PBALLOC_64K = 0,  /**< 64k. */
+	RTE_FDIR_PBALLOC_128K,     /**< 128k. */
+	RTE_FDIR_PBALLOC_256K,     /**< 256k. */
+};
+
+/**
+ *  Select report mode of FDIR hash information in RX descriptors.
+ */
+enum rte_fdir_status_mode {
+	RTE_FDIR_NO_REPORT_STATUS = 0, /**< Never report FDIR hash. */
+	RTE_FDIR_REPORT_STATUS, /**< Only report FDIR hash for matching pkts. */
+	RTE_FDIR_REPORT_STATUS_ALWAYS, /**< Always report FDIR hash. */
+};
+
+/**
+ * A structure used to configure the Flow Director (FDIR) feature
+ * of an Ethernet port.
+ *
+ * If mode is RTE_FDIR_DISABLE, the pballoc value is ignored.
+ */
+struct rte_fdir_conf {
+	enum rte_fdir_mode mode; /**< Flow Director mode. */
+	enum rte_fdir_pballoc_type pballoc; /**< Space for FDIR filters. */
+	enum rte_fdir_status_mode status;  /**< How to report FDIR hash. */
+	/** RX queue of packets matching a "drop" filter in perfect mode. */
+	uint8_t drop_queue;
+	struct rte_eth_fdir_masks mask;
+	struct rte_eth_fdir_flex_conf flex_conf;
+	/**< Flex payload configuration. */
+};
+
+/**
+ * UDP tunneling configuration.
+ * Used to config the UDP port for a type of tunnel.
+ * NICs need the UDP port to identify the tunnel type.
+ * Normally a type of tunnel has a default UDP port, this structure can be used
+ * in case if the users want to change or support more UDP port.
+ */
+struct rte_eth_udp_tunnel {
+	uint16_t udp_port; /**< UDP port used for the tunnel. */
+	uint8_t prot_type; /**< Tunnel type. Defined in rte_eth_tunnel_type. */
+};
+
+/**
+ * A structure used to enable/disable specific device interrupts.
+ */
+struct rte_intr_conf {
+	/** enable/disable lsc interrupt. 0 (default) - disable, 1 enable */
+	uint16_t lsc;
+	/** enable/disable rxq interrupt. 0 (default) - disable, 1 enable */
+	uint16_t rxq;
+};
+
+/**
+ * A structure used to configure an Ethernet port.
+ * Depending upon the RX multi-queue mode, extra advanced
+ * configuration settings may be needed.
+ */
+struct rte_eth_conf {
+	uint32_t link_speeds; /**< bitmap of ETH_LINK_SPEED_XXX of speeds to be
+				used. ETH_LINK_SPEED_FIXED disables link
+				autonegotiation, and a unique speed shall be
+				set. Otherwise, the bitmap defines the set of
+				speeds to be advertised. If the special value
+				ETH_LINK_SPEED_AUTONEG (0) is used, all speeds
+				supported are advertised. */
+	struct rte_eth_rxmode rxmode; /**< Port RX configuration. */
+	struct rte_eth_txmode txmode; /**< Port TX configuration. */
+	uint32_t lpbk_mode; /**< Loopback operation mode. By default the value
+			         is 0, meaning the loopback mode is disabled.
+				 Read the datasheet of given ethernet controller
+				 for details. The possible values of this field
+				 are defined in implementation of each driver. */
+	struct {
+		struct rte_eth_rss_conf rss_conf; /**< Port RSS configuration */
+		struct rte_eth_vmdq_dcb_conf vmdq_dcb_conf;
+		/**< Port vmdq+dcb configuration. */
+		struct rte_eth_dcb_rx_conf dcb_rx_conf;
+		/**< Port dcb RX configuration. */
+		struct rte_eth_vmdq_rx_conf vmdq_rx_conf;
+		/**< Port vmdq RX configuration. */
+	} rx_adv_conf; /**< Port RX filtering configuration (union). */
+	union {
+		struct rte_eth_vmdq_dcb_tx_conf vmdq_dcb_tx_conf;
+		/**< Port vmdq+dcb TX configuration. */
+		struct rte_eth_dcb_tx_conf dcb_tx_conf;
+		/**< Port dcb TX configuration. */
+		struct rte_eth_vmdq_tx_conf vmdq_tx_conf;
+		/**< Port vmdq TX configuration. */
+	} tx_adv_conf; /**< Port TX DCB configuration (union). */
+	/** Currently,Priority Flow Control(PFC) are supported,if DCB with PFC
+	    is needed,and the variable must be set ETH_DCB_PFC_SUPPORT. */
+	uint32_t dcb_capability_en;
+	struct rte_fdir_conf fdir_conf; /**< FDIR configuration. */
+	struct rte_intr_conf intr_conf; /**< Interrupt mode configuration. */
+};
+
+/**
+ * A structure used to retrieve the contextual information of
+ * an Ethernet device, such as the controlling driver of the device,
+ * its PCI context, etc...
+ */
+
+/**
+ * RX offload capabilities of a device.
+ */
+#define DEV_RX_OFFLOAD_VLAN_STRIP  0x00000001
+#define DEV_RX_OFFLOAD_IPV4_CKSUM  0x00000002
+#define DEV_RX_OFFLOAD_UDP_CKSUM   0x00000004
+#define DEV_RX_OFFLOAD_TCP_CKSUM   0x00000008
+#define DEV_RX_OFFLOAD_TCP_LRO     0x00000010
+#define DEV_RX_OFFLOAD_QINQ_STRIP  0x00000020
+#define DEV_RX_OFFLOAD_OUTER_IPV4_CKSUM 0x00000040
+
+/**
+ * TX offload capabilities of a device.
+ */
+#define DEV_TX_OFFLOAD_VLAN_INSERT 0x00000001
+#define DEV_TX_OFFLOAD_IPV4_CKSUM  0x00000002
+#define DEV_TX_OFFLOAD_UDP_CKSUM   0x00000004
+#define DEV_TX_OFFLOAD_TCP_CKSUM   0x00000008
+#define DEV_TX_OFFLOAD_SCTP_CKSUM  0x00000010
+#define DEV_TX_OFFLOAD_TCP_TSO     0x00000020
+#define DEV_TX_OFFLOAD_UDP_TSO     0x00000040
+#define DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM 0x00000080 /**< Used for tunneling packet. */
+#define DEV_TX_OFFLOAD_QINQ_INSERT 0x00000100
+
+/**
+ * Ethernet device information
+ */
+struct rte_eth_dev_info {
+	struct rte_pci_device *pci_dev; /**< Device PCI information. */
+	const char *driver_name; /**< Device Driver name. */
+	unsigned int if_index; /**< Index to bound host interface, or 0 if none.
+		Use if_indextoname() to translate into an interface name. */
+	uint32_t min_rx_bufsize; /**< Minimum size of RX buffer. */
+	uint32_t max_rx_pktlen; /**< Maximum configurable length of RX pkt. */
+	uint16_t max_rx_queues; /**< Maximum number of RX queues. */
+	uint16_t max_tx_queues; /**< Maximum number of TX queues. */
+	uint32_t max_mac_addrs; /**< Maximum number of MAC addresses. */
+	uint32_t max_hash_mac_addrs;
+	/** Maximum number of hash MAC addresses for MTA and UTA. */
+	uint16_t max_vfs; /**< Maximum number of VFs. */
+	uint16_t max_vmdq_pools; /**< Maximum number of VMDq pools. */
+	uint32_t rx_offload_capa; /**< Device RX offload capabilities. */
+	uint32_t tx_offload_capa; /**< Device TX offload capabilities. */
+	uint16_t reta_size;
+	/**< Device redirection table size, the total number of entries. */
+	uint8_t hash_key_size; /**< Hash key size in bytes */
+	/** Bit mask of RSS offloads, the bit offset also means flow type */
+	uint64_t flow_type_rss_offloads;
+	struct rte_eth_rxconf default_rxconf; /**< Default RX configuration */
+	struct rte_eth_txconf default_txconf; /**< Default TX configuration */
+	uint16_t vmdq_queue_base; /**< First queue ID for VMDQ pools. */
+	uint16_t vmdq_queue_num;  /**< Queue number for VMDQ pools. */
+	uint16_t vmdq_pool_base;  /**< First ID of VMDQ pools. */
+	struct rte_eth_desc_lim rx_desc_lim;  /**< RX descriptors limits */
+	struct rte_eth_desc_lim tx_desc_lim;  /**< TX descriptors limits */
+	uint32_t speed_capa;  /**< Supported speeds bitmap (ETH_LINK_SPEED_). */
+};
+
+/**
+ * Ethernet device RX queue information structure.
+ * Used to retieve information about configured queue.
+ */
+struct rte_eth_rxq_info {
+	struct rte_mempool *mp;     /**< mempool used by that queue. */
+	struct rte_eth_rxconf conf; /**< queue config parameters. */
+	uint8_t scattered_rx;       /**< scattered packets RX supported. */
+	uint16_t nb_desc;           /**< configured number of RXDs. */
+} __rte_cache_min_aligned;
+
+/**
+ * Ethernet device TX queue information structure.
+ * Used to retieve information about configured queue.
+ */
+struct rte_eth_txq_info {
+	struct rte_eth_txconf conf; /**< queue config parameters. */
+	uint16_t nb_desc;           /**< configured number of TXDs. */
+} __rte_cache_min_aligned;
+
+/** Maximum name length for extended statistics counters */
+#define RTE_ETH_XSTATS_NAME_SIZE 64
+
+/**
+ * An Ethernet device extended statistic structure
+ *
+ * This structure is used by ethdev->eth_xstats_get() to provide
+ * statistics that are not provided in the generic rte_eth_stats
+ * structure.
+ */
+struct rte_eth_xstats {
+	char name[RTE_ETH_XSTATS_NAME_SIZE];
+	uint64_t value;
+};
+
+#define ETH_DCB_NUM_TCS    8
+#define ETH_MAX_VMDQ_POOL  64
+
+/**
+ * A structure used to get the information of queue and
+ * TC mapping on both TX and RX paths.
+ */
+struct rte_eth_dcb_tc_queue_mapping {
+	/** rx queues assigned to tc per Pool */
+	struct {
+		uint8_t base;
+		uint8_t nb_queue;
+	} tc_rxq[ETH_MAX_VMDQ_POOL][ETH_DCB_NUM_TCS];
+	/** rx queues assigned to tc per Pool */
+	struct {
+		uint8_t base;
+		uint8_t nb_queue;
+	} tc_txq[ETH_MAX_VMDQ_POOL][ETH_DCB_NUM_TCS];
+};
+
+/**
+ * A structure used to get the information of DCB.
+ * It includes TC UP mapping and queue TC mapping.
+ */
+struct rte_eth_dcb_info {
+	uint8_t nb_tcs;        /**< number of TCs */
+	uint8_t prio_tc[ETH_DCB_NUM_USER_PRIORITIES]; /**< Priority to tc */
+	uint8_t tc_bws[ETH_DCB_NUM_TCS]; /**< TX BW percentage for each TC */
+	/** rx queues assigned to tc */
+	struct rte_eth_dcb_tc_queue_mapping tc_queue;
+};
+
+/**
+ * RX/TX queue states
+ */
+#define RTE_ETH_QUEUE_STATE_STOPPED 0
+#define RTE_ETH_QUEUE_STATE_STARTED 1
+
+struct rte_eth_dev;
+
+struct rte_eth_dev_callback;
+/** @internal Structure to keep track of registered callbacks */
+TAILQ_HEAD(rte_eth_dev_cb_list, rte_eth_dev_callback);
+
+
+#ifdef RTE_LIBRTE_ETHDEV_DEBUG
+#define RTE_PMD_DEBUG_TRACE(...) \
+	rte_pmd_debug_trace(__func__, __VA_ARGS__)
+#else
+#define RTE_PMD_DEBUG_TRACE(...)
+#endif
+
+
+/* Macros to check for valid port */
+#define RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, retval) do { \
+	if (!rte_eth_dev_is_valid_port(port_id)) { \
+		RTE_PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id); \
+		return retval; \
+	} \
+} while (0)
+
+#define RTE_ETH_VALID_PORTID_OR_RET(port_id) do { \
+	if (!rte_eth_dev_is_valid_port(port_id)) { \
+		RTE_PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id); \
+		return; \
+	} \
+} while (0)
+
+/**
+ * l2 tunnel configuration.
+ */
+
+/**< l2 tunnel enable mask */
+#define ETH_L2_TUNNEL_ENABLE_MASK       0x00000001
+/**< l2 tunnel insertion mask */
+#define ETH_L2_TUNNEL_INSERTION_MASK    0x00000002
+/**< l2 tunnel stripping mask */
+#define ETH_L2_TUNNEL_STRIPPING_MASK    0x00000004
+/**< l2 tunnel forwarding mask */
+#define ETH_L2_TUNNEL_FORWARDING_MASK   0x00000008
+
+/*
+ * Definitions of all functions exported by an Ethernet driver through the
+ * the generic structure of type *eth_dev_ops* supplied in the *rte_eth_dev*
+ * structure associated with an Ethernet device.
+ */
+
+typedef int  (*eth_dev_configure_t)(struct rte_eth_dev *dev);
+/**< @internal Ethernet device configuration. */
+
+typedef int  (*eth_dev_start_t)(struct rte_eth_dev *dev);
+/**< @internal Function used to start a configured Ethernet device. */
+
+typedef void (*eth_dev_stop_t)(struct rte_eth_dev *dev);
+/**< @internal Function used to stop a configured Ethernet device. */
+
+typedef int  (*eth_dev_set_link_up_t)(struct rte_eth_dev *dev);
+/**< @internal Function used to link up a configured Ethernet device. */
+
+typedef int  (*eth_dev_set_link_down_t)(struct rte_eth_dev *dev);
+/**< @internal Function used to link down a configured Ethernet device. */
+
+typedef void (*eth_dev_close_t)(struct rte_eth_dev *dev);
+/**< @internal Function used to close a configured Ethernet device. */
+
+typedef void (*eth_promiscuous_enable_t)(struct rte_eth_dev *dev);
+/**< @internal Function used to enable the RX promiscuous mode of an Ethernet device. */
+
+typedef void (*eth_promiscuous_disable_t)(struct rte_eth_dev *dev);
+/**< @internal Function used to disable the RX promiscuous mode of an Ethernet device. */
+
+typedef void (*eth_allmulticast_enable_t)(struct rte_eth_dev *dev);
+/**< @internal Enable the receipt of all multicast packets by an Ethernet device. */
+
+typedef void (*eth_allmulticast_disable_t)(struct rte_eth_dev *dev);
+/**< @internal Disable the receipt of all multicast packets by an Ethernet device. */
+
+typedef int (*eth_link_update_t)(struct rte_eth_dev *dev,
+				int wait_to_complete);
+/**< @internal Get link speed, duplex mode and state (up/down) of an Ethernet device. */
+
+typedef void (*eth_stats_get_t)(struct rte_eth_dev *dev,
+				struct rte_eth_stats *igb_stats);
+/**< @internal Get global I/O statistics of an Ethernet device. */
+
+typedef void (*eth_stats_reset_t)(struct rte_eth_dev *dev);
+/**< @internal Reset global I/O statistics of an Ethernet device to 0. */
+
+typedef int (*eth_xstats_get_t)(struct rte_eth_dev *dev,
+	struct rte_eth_xstats *stats, unsigned n);
+/**< @internal Get extended stats of an Ethernet device. */
+
+typedef void (*eth_xstats_reset_t)(struct rte_eth_dev *dev);
+/**< @internal Reset extended stats of an Ethernet device. */
+
+typedef int (*eth_queue_stats_mapping_set_t)(struct rte_eth_dev *dev,
+					     uint16_t queue_id,
+					     uint8_t stat_idx,
+					     uint8_t is_rx);
+/**< @internal Set a queue statistics mapping for a tx/rx queue of an Ethernet device. */
+
+typedef void (*eth_dev_infos_get_t)(struct rte_eth_dev *dev,
+				    struct rte_eth_dev_info *dev_info);
+/**< @internal Get specific informations of an Ethernet device. */
+
+typedef const uint32_t *(*eth_dev_supported_ptypes_get_t)(struct rte_eth_dev *dev);
+/**< @internal Get supported ptypes of an Ethernet device. */
+
+typedef int (*eth_queue_start_t)(struct rte_eth_dev *dev,
+				    uint16_t queue_id);
+/**< @internal Start rx and tx of a queue of an Ethernet device. */
+
+typedef int (*eth_queue_stop_t)(struct rte_eth_dev *dev,
+				    uint16_t queue_id);
+/**< @internal Stop rx and tx of a queue of an Ethernet device. */
+
+typedef int (*eth_rx_queue_setup_t)(struct rte_eth_dev *dev,
+				    uint16_t rx_queue_id,
+				    uint16_t nb_rx_desc,
+				    unsigned int socket_id,
+				    const struct rte_eth_rxconf *rx_conf,
+				    struct rte_mempool *mb_pool);
+/**< @internal Set up a receive queue of an Ethernet device. */
+
+typedef int (*eth_tx_queue_setup_t)(struct rte_eth_dev *dev,
+				    uint16_t tx_queue_id,
+				    uint16_t nb_tx_desc,
+				    unsigned int socket_id,
+				    const struct rte_eth_txconf *tx_conf);
+/**< @internal Setup a transmit queue of an Ethernet device. */
+
+typedef int (*eth_rx_enable_intr_t)(struct rte_eth_dev *dev,
+				    uint16_t rx_queue_id);
+/**< @internal Enable interrupt of a receive queue of an Ethernet device. */
+
+typedef int (*eth_rx_disable_intr_t)(struct rte_eth_dev *dev,
+				    uint16_t rx_queue_id);
+/**< @internal Disable interrupt of a receive queue of an Ethernet device. */
+
+typedef void (*eth_queue_release_t)(void *queue);
+/**< @internal Release memory resources allocated by given RX/TX queue. */
+
+typedef uint32_t (*eth_rx_queue_count_t)(struct rte_eth_dev *dev,
+					 uint16_t rx_queue_id);
+/**< @internal Get number of available descriptors on a receive queue of an Ethernet device. */
+
+typedef int (*eth_rx_descriptor_done_t)(void *rxq, uint16_t offset);
+/**< @internal Check DD bit of specific RX descriptor */
+
+typedef void (*eth_rxq_info_get_t)(struct rte_eth_dev *dev,
+	uint16_t rx_queue_id, struct rte_eth_rxq_info *qinfo);
+
+typedef void (*eth_txq_info_get_t)(struct rte_eth_dev *dev,
+	uint16_t tx_queue_id, struct rte_eth_txq_info *qinfo);
+
+typedef int (*mtu_set_t)(struct rte_eth_dev *dev, uint16_t mtu);
+/**< @internal Set MTU. */
+
+typedef int (*vlan_filter_set_t)(struct rte_eth_dev *dev,
+				  uint16_t vlan_id,
+				  int on);
+/**< @internal filtering of a VLAN Tag Identifier by an Ethernet device. */
+
+typedef int (*vlan_tpid_set_t)(struct rte_eth_dev *dev,
+			       enum rte_vlan_type type, uint16_t tpid);
+/**< @internal set the outer VLAN-TPID by an Ethernet device. */
+
+typedef void (*vlan_offload_set_t)(struct rte_eth_dev *dev, int mask);
+/**< @internal set VLAN offload function by an Ethernet device. */
+
+typedef int (*vlan_pvid_set_t)(struct rte_eth_dev *dev,
+			       uint16_t vlan_id,
+			       int on);
+/**< @internal set port based TX VLAN insertion by an Ethernet device. */
+
+typedef void (*vlan_strip_queue_set_t)(struct rte_eth_dev *dev,
+				  uint16_t rx_queue_id,
+				  int on);
+/**< @internal VLAN stripping enable/disable by an queue of Ethernet device. */
+
+typedef uint16_t (*eth_rx_burst_t)(void *rxq,
+				   struct rte_mbuf **rx_pkts,
+				   uint16_t nb_pkts);
+/**< @internal Retrieve input packets from a receive queue of an Ethernet device. */
+
+typedef uint16_t (*eth_tx_burst_t)(void *txq,
+				   struct rte_mbuf **tx_pkts,
+				   uint16_t nb_pkts);
+/**< @internal Send output packets on a transmit queue of an Ethernet device. */
+
+typedef int (*flow_ctrl_get_t)(struct rte_eth_dev *dev,
+			       struct rte_eth_fc_conf *fc_conf);
+/**< @internal Get current flow control parameter on an Ethernet device */
+
+typedef int (*flow_ctrl_set_t)(struct rte_eth_dev *dev,
+			       struct rte_eth_fc_conf *fc_conf);
+/**< @internal Setup flow control parameter on an Ethernet device */
+
+typedef int (*priority_flow_ctrl_set_t)(struct rte_eth_dev *dev,
+				struct rte_eth_pfc_conf *pfc_conf);
+/**< @internal Setup priority flow control parameter on an Ethernet device */
+
+typedef int (*reta_update_t)(struct rte_eth_dev *dev,
+			     struct rte_eth_rss_reta_entry64 *reta_conf,
+			     uint16_t reta_size);
+/**< @internal Update RSS redirection table on an Ethernet device */
+
+typedef int (*reta_query_t)(struct rte_eth_dev *dev,
+			    struct rte_eth_rss_reta_entry64 *reta_conf,
+			    uint16_t reta_size);
+/**< @internal Query RSS redirection table on an Ethernet device */
+
+typedef int (*rss_hash_update_t)(struct rte_eth_dev *dev,
+				 struct rte_eth_rss_conf *rss_conf);
+/**< @internal Update RSS hash configuration of an Ethernet device */
+
+typedef int (*rss_hash_conf_get_t)(struct rte_eth_dev *dev,
+				   struct rte_eth_rss_conf *rss_conf);
+/**< @internal Get current RSS hash configuration of an Ethernet device */
+
+typedef int (*eth_dev_led_on_t)(struct rte_eth_dev *dev);
+/**< @internal Turn on SW controllable LED on an Ethernet device */
+
+typedef int (*eth_dev_led_off_t)(struct rte_eth_dev *dev);
+/**< @internal Turn off SW controllable LED on an Ethernet device */
+
+typedef void (*eth_mac_addr_remove_t)(struct rte_eth_dev *dev, uint32_t index);
+/**< @internal Remove MAC address from receive address register */
+
+typedef void (*eth_mac_addr_add_t)(struct rte_eth_dev *dev,
+				  struct ether_addr *mac_addr,
+				  uint32_t index,
+				  uint32_t vmdq);
+/**< @internal Set a MAC address into Receive Address Address Register */
+
+typedef void (*eth_mac_addr_set_t)(struct rte_eth_dev *dev,
+				  struct ether_addr *mac_addr);
+/**< @internal Set a MAC address into Receive Address Address Register */
+
+typedef int (*eth_uc_hash_table_set_t)(struct rte_eth_dev *dev,
+				  struct ether_addr *mac_addr,
+				  uint8_t on);
+/**< @internal Set a Unicast Hash bitmap */
+
+typedef int (*eth_uc_all_hash_table_set_t)(struct rte_eth_dev *dev,
+				  uint8_t on);
+/**< @internal Set all Unicast Hash bitmap */
+
+typedef int (*eth_set_vf_rx_mode_t)(struct rte_eth_dev *dev,
+				  uint16_t vf,
+				  uint16_t rx_mode,
+				  uint8_t on);
+/**< @internal Set a VF receive mode */
+
+typedef int (*eth_set_vf_rx_t)(struct rte_eth_dev *dev,
+				uint16_t vf,
+				uint8_t on);
+/**< @internal Set a VF receive  mode */
+
+typedef int (*eth_set_vf_tx_t)(struct rte_eth_dev *dev,
+				uint16_t vf,
+				uint8_t on);
+/**< @internal Enable or disable a VF transmit   */
+
+typedef int (*eth_set_vf_vlan_filter_t)(struct rte_eth_dev *dev,
+				  uint16_t vlan,
+				  uint64_t vf_mask,
+				  uint8_t vlan_on);
+/**< @internal Set VF VLAN pool filter */
+
+typedef int (*eth_set_queue_rate_limit_t)(struct rte_eth_dev *dev,
+				uint16_t queue_idx,
+				uint16_t tx_rate);
+/**< @internal Set queue TX rate */
+
+typedef int (*eth_set_vf_rate_limit_t)(struct rte_eth_dev *dev,
+				uint16_t vf,
+				uint16_t tx_rate,
+				uint64_t q_msk);
+/**< @internal Set VF TX rate */
+
+typedef int (*eth_mirror_rule_set_t)(struct rte_eth_dev *dev,
+				  struct rte_eth_mirror_conf *mirror_conf,
+				  uint8_t rule_id,
+				  uint8_t on);
+/**< @internal Add a traffic mirroring rule on an Ethernet device */
+
+typedef int (*eth_mirror_rule_reset_t)(struct rte_eth_dev *dev,
+				  uint8_t rule_id);
+/**< @internal Remove a traffic mirroring rule on an Ethernet device */
+
+typedef int (*eth_udp_tunnel_port_add_t)(struct rte_eth_dev *dev,
+					 struct rte_eth_udp_tunnel *tunnel_udp);
+/**< @internal Add tunneling UDP port */
+
+typedef int (*eth_udp_tunnel_port_del_t)(struct rte_eth_dev *dev,
+					 struct rte_eth_udp_tunnel *tunnel_udp);
+/**< @internal Delete tunneling UDP port */
+
+typedef int (*eth_set_mc_addr_list_t)(struct rte_eth_dev *dev,
+				      struct ether_addr *mc_addr_set,
+				      uint32_t nb_mc_addr);
+/**< @internal set the list of multicast addresses on an Ethernet device */
+
+typedef int (*eth_timesync_enable_t)(struct rte_eth_dev *dev);
+/**< @internal Function used to enable IEEE1588/802.1AS timestamping. */
+
+typedef int (*eth_timesync_disable_t)(struct rte_eth_dev *dev);
+/**< @internal Function used to disable IEEE1588/802.1AS timestamping. */
+
+typedef int (*eth_timesync_read_rx_timestamp_t)(struct rte_eth_dev *dev,
+						struct timespec *timestamp,
+						uint32_t flags);
+/**< @internal Function used to read an RX IEEE1588/802.1AS timestamp. */
+
+typedef int (*eth_timesync_read_tx_timestamp_t)(struct rte_eth_dev *dev,
+						struct timespec *timestamp);
+/**< @internal Function used to read a TX IEEE1588/802.1AS timestamp. */
+
+typedef int (*eth_timesync_adjust_time)(struct rte_eth_dev *dev, int64_t);
+/**< @internal Function used to adjust the device clock */
+
+typedef int (*eth_timesync_read_time)(struct rte_eth_dev *dev,
+				      struct timespec *timestamp);
+/**< @internal Function used to get time from the device clock. */
+
+typedef int (*eth_timesync_write_time)(struct rte_eth_dev *dev,
+				       const struct timespec *timestamp);
+/**< @internal Function used to get time from the device clock */
+
+typedef int (*eth_get_reg_length_t)(struct rte_eth_dev *dev);
+/**< @internal Retrieve device register count  */
+
+typedef int (*eth_get_reg_t)(struct rte_eth_dev *dev,
+				struct rte_dev_reg_info *info);
+/**< @internal Retrieve registers  */
+
+typedef int (*eth_get_eeprom_length_t)(struct rte_eth_dev *dev);
+/**< @internal Retrieve eeprom size  */
+
+typedef int (*eth_get_eeprom_t)(struct rte_eth_dev *dev,
+				struct rte_dev_eeprom_info *info);
+/**< @internal Retrieve eeprom data  */
+
+typedef int (*eth_set_eeprom_t)(struct rte_eth_dev *dev,
+				struct rte_dev_eeprom_info *info);
+/**< @internal Program eeprom data  */
+
+typedef int (*eth_l2_tunnel_eth_type_conf_t)
+	(struct rte_eth_dev *dev, struct rte_eth_l2_tunnel_conf *l2_tunnel);
+/**< @internal config l2 tunnel ether type */
+
+typedef int (*eth_l2_tunnel_offload_set_t)
+	(struct rte_eth_dev *dev,
+	 struct rte_eth_l2_tunnel_conf *l2_tunnel,
+	 uint32_t mask,
+	 uint8_t en);
+/**< @internal enable/disable the l2 tunnel offload functions */
+
+#ifdef RTE_NIC_BYPASS
+
+enum {
+	RTE_BYPASS_MODE_NONE,
+	RTE_BYPASS_MODE_NORMAL,
+	RTE_BYPASS_MODE_BYPASS,
+	RTE_BYPASS_MODE_ISOLATE,
+	RTE_BYPASS_MODE_NUM,
+};
+
+#define	RTE_BYPASS_MODE_VALID(x)	\
+	((x) > RTE_BYPASS_MODE_NONE && (x) < RTE_BYPASS_MODE_NUM)
+
+enum {
+	RTE_BYPASS_EVENT_NONE,
+	RTE_BYPASS_EVENT_START,
+	RTE_BYPASS_EVENT_OS_ON = RTE_BYPASS_EVENT_START,
+	RTE_BYPASS_EVENT_POWER_ON,
+	RTE_BYPASS_EVENT_OS_OFF,
+	RTE_BYPASS_EVENT_POWER_OFF,
+	RTE_BYPASS_EVENT_TIMEOUT,
+	RTE_BYPASS_EVENT_NUM
+};
+
+#define	RTE_BYPASS_EVENT_VALID(x)	\
+	((x) > RTE_BYPASS_EVENT_NONE && (x) < RTE_BYPASS_MODE_NUM)
+
+enum {
+	RTE_BYPASS_TMT_OFF,     /* timeout disabled. */
+	RTE_BYPASS_TMT_1_5_SEC, /* timeout for 1.5 seconds */
+	RTE_BYPASS_TMT_2_SEC,   /* timeout for 2 seconds */
+	RTE_BYPASS_TMT_3_SEC,   /* timeout for 3 seconds */
+	RTE_BYPASS_TMT_4_SEC,   /* timeout for 4 seconds */
+	RTE_BYPASS_TMT_8_SEC,   /* timeout for 8 seconds */
+	RTE_BYPASS_TMT_16_SEC,  /* timeout for 16 seconds */
+	RTE_BYPASS_TMT_32_SEC,  /* timeout for 32 seconds */
+	RTE_BYPASS_TMT_NUM
+};
+
+#define	RTE_BYPASS_TMT_VALID(x)	\
+	((x) == RTE_BYPASS_TMT_OFF || \
+	((x) > RTE_BYPASS_TMT_OFF && (x) < RTE_BYPASS_TMT_NUM))
+
+typedef void (*bypass_init_t)(struct rte_eth_dev *dev);
+typedef int32_t (*bypass_state_set_t)(struct rte_eth_dev *dev, uint32_t *new_state);
+typedef int32_t (*bypass_state_show_t)(struct rte_eth_dev *dev, uint32_t *state);
+typedef int32_t (*bypass_event_set_t)(struct rte_eth_dev *dev, uint32_t state, uint32_t event);
+typedef int32_t (*bypass_event_show_t)(struct rte_eth_dev *dev, uint32_t event_shift, uint32_t *event);
+typedef int32_t (*bypass_wd_timeout_set_t)(struct rte_eth_dev *dev, uint32_t timeout);
+typedef int32_t (*bypass_wd_timeout_show_t)(struct rte_eth_dev *dev, uint32_t *wd_timeout);
+typedef int32_t (*bypass_ver_show_t)(struct rte_eth_dev *dev, uint32_t *ver);
+typedef int32_t (*bypass_wd_reset_t)(struct rte_eth_dev *dev);
+#endif
+
+typedef int (*eth_filter_ctrl_t)(struct rte_eth_dev *dev,
+				 enum rte_filter_type filter_type,
+				 enum rte_filter_op filter_op,
+				 void *arg);
+/**< @internal Take operations to assigned filter type on an Ethernet device */
+
+typedef int (*eth_get_dcb_info)(struct rte_eth_dev *dev,
+				 struct rte_eth_dcb_info *dcb_info);
+/**< @internal Get dcb information on an Ethernet device */
+
+/**
+ * @internal A structure containing the functions exported by an Ethernet driver.
+ */
+struct eth_dev_ops {
+	eth_dev_configure_t        dev_configure; /**< Configure device. */
+	eth_dev_start_t            dev_start;     /**< Start device. */
+	eth_dev_stop_t             dev_stop;      /**< Stop device. */
+	eth_dev_set_link_up_t      dev_set_link_up;   /**< Device link up. */
+	eth_dev_set_link_down_t    dev_set_link_down; /**< Device link down. */
+	eth_dev_close_t            dev_close;     /**< Close device. */
+	eth_promiscuous_enable_t   promiscuous_enable; /**< Promiscuous ON. */
+	eth_promiscuous_disable_t  promiscuous_disable;/**< Promiscuous OFF. */
+	eth_allmulticast_enable_t  allmulticast_enable;/**< RX multicast ON. */
+	eth_allmulticast_disable_t allmulticast_disable;/**< RX multicast OF. */
+	eth_link_update_t          link_update;   /**< Get device link state. */
+	eth_stats_get_t            stats_get;     /**< Get generic device statistics. */
+	eth_stats_reset_t          stats_reset;   /**< Reset generic device statistics. */
+	eth_xstats_get_t           xstats_get;    /**< Get extended device statistics. */
+	eth_xstats_reset_t         xstats_reset;  /**< Reset extended device statistics. */
+	eth_queue_stats_mapping_set_t queue_stats_mapping_set;
+	/**< Configure per queue stat counter mapping. */
+	eth_dev_infos_get_t        dev_infos_get; /**< Get device info. */
+	eth_dev_supported_ptypes_get_t dev_supported_ptypes_get;
+	/**< Get packet types supported and identified by device*/
+	mtu_set_t                  mtu_set; /**< Set MTU. */
+	vlan_filter_set_t          vlan_filter_set;  /**< Filter VLAN Setup. */
+	vlan_tpid_set_t            vlan_tpid_set;      /**< Outer VLAN TPID Setup. */
+	vlan_strip_queue_set_t     vlan_strip_queue_set; /**< VLAN Stripping on queue. */
+	vlan_offload_set_t         vlan_offload_set; /**< Set VLAN Offload. */
+	vlan_pvid_set_t            vlan_pvid_set; /**< Set port based TX VLAN insertion */
+	eth_queue_start_t          rx_queue_start;/**< Start RX for a queue.*/
+	eth_queue_stop_t           rx_queue_stop;/**< Stop RX for a queue.*/
+	eth_queue_start_t          tx_queue_start;/**< Start TX for a queue.*/
+	eth_queue_stop_t           tx_queue_stop;/**< Stop TX for a queue.*/
+	eth_rx_queue_setup_t       rx_queue_setup;/**< Set up device RX queue.*/
+	eth_queue_release_t        rx_queue_release;/**< Release RX queue.*/
+	eth_rx_queue_count_t       rx_queue_count; /**< Get Rx queue count. */
+	eth_rx_descriptor_done_t   rx_descriptor_done;  /**< Check rxd DD bit */
+	/**< Enable Rx queue interrupt. */
+	eth_rx_enable_intr_t       rx_queue_intr_enable;
+	/**< Disable Rx queue interrupt.*/
+	eth_rx_disable_intr_t      rx_queue_intr_disable;
+	eth_tx_queue_setup_t       tx_queue_setup;/**< Set up device TX queue.*/
+	eth_queue_release_t        tx_queue_release;/**< Release TX queue.*/
+	eth_dev_led_on_t           dev_led_on;    /**< Turn on LED. */
+	eth_dev_led_off_t          dev_led_off;   /**< Turn off LED. */
+	flow_ctrl_get_t            flow_ctrl_get; /**< Get flow control. */
+	flow_ctrl_set_t            flow_ctrl_set; /**< Setup flow control. */
+	priority_flow_ctrl_set_t   priority_flow_ctrl_set; /**< Setup priority flow control.*/
+	eth_mac_addr_remove_t      mac_addr_remove; /**< Remove MAC address */
+	eth_mac_addr_add_t         mac_addr_add;  /**< Add a MAC address */
+	eth_mac_addr_set_t         mac_addr_set;  /**< Set a MAC address */
+	eth_uc_hash_table_set_t    uc_hash_table_set;  /**< Set Unicast Table Array */
+	eth_uc_all_hash_table_set_t uc_all_hash_table_set;  /**< Set Unicast hash bitmap */
+	eth_mirror_rule_set_t	   mirror_rule_set;  /**< Add a traffic mirror rule.*/
+	eth_mirror_rule_reset_t	   mirror_rule_reset;  /**< reset a traffic mirror rule.*/
+	eth_set_vf_rx_mode_t       set_vf_rx_mode;   /**< Set VF RX mode */
+	eth_set_vf_rx_t            set_vf_rx;  /**< enable/disable a VF receive */
+	eth_set_vf_tx_t            set_vf_tx;  /**< enable/disable a VF transmit */
+	eth_set_vf_vlan_filter_t   set_vf_vlan_filter;  /**< Set VF VLAN filter */
+	/** Add UDP tunnel port. */
+	eth_udp_tunnel_port_add_t udp_tunnel_port_add;
+	/** Del UDP tunnel port. */
+	eth_udp_tunnel_port_del_t udp_tunnel_port_del;
+	eth_set_queue_rate_limit_t set_queue_rate_limit;   /**< Set queue rate limit */
+	eth_set_vf_rate_limit_t    set_vf_rate_limit;   /**< Set VF rate limit */
+	/** Update redirection table. */
+	reta_update_t reta_update;
+	/** Query redirection table. */
+	reta_query_t reta_query;
+
+	eth_get_reg_length_t get_reg_length;
+	/**< Get # of registers */
+	eth_get_reg_t get_reg;
+	/**< Get registers */
+	eth_get_eeprom_length_t get_eeprom_length;
+	/**< Get eeprom length */
+	eth_get_eeprom_t get_eeprom;
+	/**< Get eeprom data */
+	eth_set_eeprom_t set_eeprom;
+	/**< Set eeprom */
+  /* bypass control */
+#ifdef RTE_NIC_BYPASS
+  bypass_init_t bypass_init;
+  bypass_state_set_t bypass_state_set;
+  bypass_state_show_t bypass_state_show;
+  bypass_event_set_t bypass_event_set;
+  bypass_event_show_t bypass_event_show;
+  bypass_wd_timeout_set_t bypass_wd_timeout_set;
+  bypass_wd_timeout_show_t bypass_wd_timeout_show;
+  bypass_ver_show_t bypass_ver_show;
+  bypass_wd_reset_t bypass_wd_reset;
+#endif
+
+	/** Configure RSS hash protocols. */
+	rss_hash_update_t rss_hash_update;
+	/** Get current RSS hash configuration. */
+	rss_hash_conf_get_t rss_hash_conf_get;
+	eth_filter_ctrl_t              filter_ctrl;
+	/**< common filter control. */
+	eth_set_mc_addr_list_t set_mc_addr_list; /**< set list of mcast addrs */
+	eth_rxq_info_get_t rxq_info_get;
+	/**< retrieve RX queue information. */
+	eth_txq_info_get_t txq_info_get;
+	/**< retrieve TX queue information. */
+	/** Turn IEEE1588/802.1AS timestamping on. */
+	eth_timesync_enable_t timesync_enable;
+	/** Turn IEEE1588/802.1AS timestamping off. */
+	eth_timesync_disable_t timesync_disable;
+	/** Read the IEEE1588/802.1AS RX timestamp. */
+	eth_timesync_read_rx_timestamp_t timesync_read_rx_timestamp;
+	/** Read the IEEE1588/802.1AS TX timestamp. */
+	eth_timesync_read_tx_timestamp_t timesync_read_tx_timestamp;
+
+	/** Get DCB information */
+	eth_get_dcb_info get_dcb_info;
+	/** Adjust the device clock.*/
+	eth_timesync_adjust_time timesync_adjust_time;
+	/** Get the device clock time. */
+	eth_timesync_read_time timesync_read_time;
+	/** Set the device clock time. */
+	eth_timesync_write_time timesync_write_time;
+	/** Config ether type of l2 tunnel */
+	eth_l2_tunnel_eth_type_conf_t l2_tunnel_eth_type_conf;
+	/** Enable/disable l2 tunnel offload functions */
+	eth_l2_tunnel_offload_set_t l2_tunnel_offload_set;
+};
+
+/**
+ * Function type used for RX packet processing packet callbacks.
+ *
+ * The callback function is called on RX with a burst of packets that have
+ * been received on the given port and queue.
+ *
+ * @param port
+ *   The Ethernet port on which RX is being performed.
+ * @param queue
+ *   The queue on the Ethernet port which is being used to receive the packets.
+ * @param pkts
+ *   The burst of packets that have just been received.
+ * @param nb_pkts
+ *   The number of packets in the burst pointed to by "pkts".
+ * @param max_pkts
+ *   The max number of packets that can be stored in the "pkts" array.
+ * @param user_param
+ *   The arbitrary user parameter passed in by the application when the callback
+ *   was originally configured.
+ * @return
+ *   The number of packets returned to the user.
+ */
+typedef uint16_t (*rte_rx_callback_fn)(uint8_t port, uint16_t queue,
+	struct rte_mbuf *pkts[], uint16_t nb_pkts, uint16_t max_pkts,
+	void *user_param);
+
+/**
+ * Function type used for TX packet processing packet callbacks.
+ *
+ * The callback function is called on TX with a burst of packets immediately
+ * before the packets are put onto the hardware queue for transmission.
+ *
+ * @param port
+ *   The Ethernet port on which TX is being performed.
+ * @param queue
+ *   The queue on the Ethernet port which is being used to transmit the packets.
+ * @param pkts
+ *   The burst of packets that are about to be transmitted.
+ * @param nb_pkts
+ *   The number of packets in the burst pointed to by "pkts".
+ * @param user_param
+ *   The arbitrary user parameter passed in by the application when the callback
+ *   was originally configured.
+ * @return
+ *   The number of packets to be written to the NIC.
+ */
+typedef uint16_t (*rte_tx_callback_fn)(uint8_t port, uint16_t queue,
+	struct rte_mbuf *pkts[], uint16_t nb_pkts, void *user_param);
+
+/**
+ * @internal
+ * Structure used to hold information about the callbacks to be called for a
+ * queue on RX and TX.
+ */
+struct rte_eth_rxtx_callback {
+	struct rte_eth_rxtx_callback *next;
+	union{
+		rte_rx_callback_fn rx;
+		rte_tx_callback_fn tx;
+	} fn;
+	void *param;
+};
+
+/**
+ * The eth device type.
+ */
+enum rte_eth_dev_type {
+	RTE_ETH_DEV_UNKNOWN,	/**< unknown device type */
+	RTE_ETH_DEV_PCI,
+		/**< Physical function and Virtual function of PCI devices */
+	RTE_ETH_DEV_VIRTUAL,	/**< non hardware device */
+	RTE_ETH_DEV_MAX		/**< max value of this enum */
+};
+
+/**
+ * @internal
+ * The generic data structure associated with each ethernet device.
+ *
+ * Pointers to burst-oriented packet receive and transmit functions are
+ * located at the beginning of the structure, along with the pointer to
+ * where all the data elements for the particular device are stored in shared
+ * memory. This split allows the function pointer and driver data to be per-
+ * process, while the actual configuration data for the device is shared.
+ */
+struct rte_eth_dev {
+	eth_rx_burst_t rx_pkt_burst; /**< Pointer to PMD receive function. */
+	eth_tx_burst_t tx_pkt_burst; /**< Pointer to PMD transmit function. */
+	struct rte_eth_dev_data *data;  /**< Pointer to device data */
+	const struct eth_driver *driver;/**< Driver for this device */
+	const struct eth_dev_ops *dev_ops; /**< Functions exported by PMD */
+	struct rte_pci_device *pci_dev; /**< PCI info. supplied by probing */
+	/** User application callbacks for NIC interrupts */
+	struct rte_eth_dev_cb_list link_intr_cbs;
+	/**
+	 * User-supplied functions called from rx_burst to post-process
+	 * received packets before passing them to the user
+	 */
+	struct rte_eth_rxtx_callback *post_rx_burst_cbs[RTE_MAX_QUEUES_PER_PORT];
+	/**
+	 * User-supplied functions called from tx_burst to pre-process
+	 * received packets before passing them to the driver for transmission.
+	 */
+	struct rte_eth_rxtx_callback *pre_tx_burst_cbs[RTE_MAX_QUEUES_PER_PORT];
+	uint8_t attached; /**< Flag indicating the port is attached */
+	enum rte_eth_dev_type dev_type; /**< Flag indicating the device type */
+};
+
+struct rte_eth_dev_sriov {
+	uint8_t active;               /**< SRIOV is active with 16, 32 or 64 pools */
+	uint8_t nb_q_per_pool;        /**< rx queue number per pool */
+	uint16_t def_vmdq_idx;        /**< Default pool num used for PF */
+	uint16_t def_pool_q_idx;      /**< Default pool queue start reg index */
+};
+#define RTE_ETH_DEV_SRIOV(dev)         ((dev)->data->sriov)
+
+#define RTE_ETH_NAME_MAX_LEN (32)
+
+/**
+ * @internal
+ * The data part, with no function pointers, associated with each ethernet device.
+ *
+ * This structure is safe to place in shared memory to be common among different
+ * processes in a multi-process configuration.
+ */
+struct rte_eth_dev_data {
+	char name[RTE_ETH_NAME_MAX_LEN]; /**< Unique identifier name */
+
+	void **rx_queues; /**< Array of pointers to RX queues. */
+	void **tx_queues; /**< Array of pointers to TX queues. */
+	uint16_t nb_rx_queues; /**< Number of RX queues. */
+	uint16_t nb_tx_queues; /**< Number of TX queues. */
+
+	struct rte_eth_dev_sriov sriov;    /**< SRIOV data */
+
+	void *dev_private;              /**< PMD-specific private data */
+
+	struct rte_eth_link dev_link;
+	/**< Link-level information & status */
+
+	struct rte_eth_conf dev_conf;   /**< Configuration applied to device. */
+	uint16_t mtu;                   /**< Maximum Transmission Unit. */
+
+	uint32_t min_rx_buf_size;
+	/**< Common rx buffer size handled by all queues */
+
+	uint64_t rx_mbuf_alloc_failed; /**< RX ring mbuf allocation failures. */
+	struct ether_addr* mac_addrs;/**< Device Ethernet Link address. */
+	uint64_t mac_pool_sel[ETH_NUM_RECEIVE_MAC_ADDR];
+	/** bitmap array of associating Ethernet MAC addresses to pools */
+	struct ether_addr* hash_mac_addrs;
+	/** Device Ethernet MAC addresses of hash filtering. */
+	uint8_t port_id;           /**< Device [external] port identifier. */
+	uint8_t promiscuous   : 1, /**< RX promiscuous mode ON(1) / OFF(0). */
+		scattered_rx : 1,  /**< RX of scattered packets is ON(1) / OFF(0) */
+		all_multicast : 1, /**< RX all multicast mode ON(1) / OFF(0). */
+		dev_started : 1,   /**< Device state: STARTED(1) / STOPPED(0). */
+		lro         : 1;   /**< RX LRO is ON(1) / OFF(0) */
+	uint8_t rx_queue_state[RTE_MAX_QUEUES_PER_PORT];
+	/** Queues state: STARTED(1) / STOPPED(0) */
+	uint8_t tx_queue_state[RTE_MAX_QUEUES_PER_PORT];
+	/** Queues state: STARTED(1) / STOPPED(0) */
+	uint32_t dev_flags; /**< Capabilities */
+	enum rte_kernel_driver kdrv;    /**< Kernel driver passthrough */
+	int numa_node;  /**< NUMA node connection */
+	const char *drv_name;   /**< Driver name */
+};
+
+/** Device supports hotplug detach */
+#define RTE_ETH_DEV_DETACHABLE   0x0001
+/** Device supports link state interrupt */
+#define RTE_ETH_DEV_INTR_LSC     0x0002
+/** Device is a bonded slave */
+#define RTE_ETH_DEV_BONDED_SLAVE 0x0004
+
+/**
+ * @internal
+ * The pool of *rte_eth_dev* structures. The size of the pool
+ * is configured at compile-time in the <rte_ethdev.c> file.
+ */
+extern struct rte_eth_dev rte_eth_devices[];
+
+/**
+ * Get the total number of Ethernet devices that have been successfully
+ * initialized by the [matching] Ethernet driver during the PCI probing phase.
+ * All devices whose port identifier is in the range
+ * [0,  rte_eth_dev_count() - 1] can be operated on by network applications
+ * immediately after invoking rte_eal_init().
+ * If the application unplugs a port using hotplug function, The enabled port
+ * numbers may be noncontiguous. In the case, the applications need to manage
+ * enabled port by themselves.
+ *
+ * @return
+ *   - The total number of usable Ethernet devices.
+ */
+uint8_t rte_eth_dev_count(void);
+
+/**
+ * @internal
+ * Returns a ethdev slot specified by the unique identifier name.
+ *
+ * @param	name
+ *  The pointer to the Unique identifier name for each Ethernet device
+ * @return
+ *   - The pointer to the ethdev slot, on success. NULL on error
+ */
+struct rte_eth_dev *rte_eth_dev_allocated(const char *name);
+
+/**
+ * @internal
+ * Allocates a new ethdev slot for an ethernet device and returns the pointer
+ * to that slot for the driver to use.
+ *
+ * @param	name	Unique identifier name for each Ethernet device
+ * @param	type	Device type of this Ethernet device
+ * @return
+ *   - Slot in the rte_dev_devices array for a new device;
+ */
+struct rte_eth_dev *rte_eth_dev_allocate(const char *name,
+		enum rte_eth_dev_type type);
+
+/**
+ * @internal
+ * Release the specified ethdev port.
+ *
+ * @param eth_dev
+ * The *eth_dev* pointer is the address of the *rte_eth_dev* structure.
+ * @return
+ *   - 0 on success, negative on error
+ */
+int rte_eth_dev_release_port(struct rte_eth_dev *eth_dev);
+
+/**
+ * Attach a new Ethernet device specified by aruguments.
+ *
+ * @param devargs
+ *  A pointer to a strings array describing the new device
+ *  to be attached. The strings should be a pci address like
+ *  '0000:01:00.0' or virtual device name like 'eth_pcap0'.
+ * @param port_id
+ *  A pointer to a port identifier actually attached.
+ * @return
+ *  0 on success and port_id is filled, negative on error
+ */
+int rte_eth_dev_attach(const char *devargs, uint8_t *port_id);
+
+/**
+ * Detach a Ethernet device specified by port identifier.
+ * This function must be called when the device is in the
+ * closed state.
+ *
+ * @param port_id
+ *   The port identifier of the device to detach.
+ * @param devname
+ *  A pointer to a device name actually detached.
+ * @return
+ *  0 on success and devname is filled, negative on error
+ */
+int rte_eth_dev_detach(uint8_t port_id, char *devname);
+
+struct eth_driver;
+/**
+ * @internal
+ * Initialization function of an Ethernet driver invoked for each matching
+ * Ethernet PCI device detected during the PCI probing phase.
+ *
+ * @param eth_dev
+ *   The *eth_dev* pointer is the address of the *rte_eth_dev* structure
+ *   associated with the matching device and which have been [automatically]
+ *   allocated in the *rte_eth_devices* array.
+ *   The *eth_dev* structure is supplied to the driver initialization function
+ *   with the following fields already initialized:
+ *
+ *   - *pci_dev*: Holds the pointers to the *rte_pci_device* structure which
+ *     contains the generic PCI information of the matching device.
+ *
+ *   - *driver*: Holds the pointer to the *eth_driver* structure.
+ *
+ *   - *dev_private*: Holds a pointer to the device private data structure.
+ *
+ *   - *mtu*: Contains the default Ethernet maximum frame length (1500).
+ *
+ *   - *port_id*: Contains the port index of the device (actually the index
+ *     of the *eth_dev* structure in the *rte_eth_devices* array).
+ *
+ * @return
+ *   - 0: Success, the device is properly initialized by the driver.
+ *        In particular, the driver MUST have set up the *dev_ops* pointer
+ *        of the *eth_dev* structure.
+ *   - <0: Error code of the device initialization failure.
+ */
+typedef int (*eth_dev_init_t)(struct rte_eth_dev *eth_dev);
+
+/**
+ * @internal
+ * Finalization function of an Ethernet driver invoked for each matching
+ * Ethernet PCI device detected during the PCI closing phase.
+ *
+ * @param eth_dev
+ *   The *eth_dev* pointer is the address of the *rte_eth_dev* structure
+ *   associated with the matching device and which have been [automatically]
+ *   allocated in the *rte_eth_devices* array.
+ * @return
+ *   - 0: Success, the device is properly finalized by the driver.
+ *        In particular, the driver MUST free the *dev_ops* pointer
+ *        of the *eth_dev* structure.
+ *   - <0: Error code of the device initialization failure.
+ */
+typedef int (*eth_dev_uninit_t)(struct rte_eth_dev *eth_dev);
+
+/**
+ * @internal
+ * The structure associated with a PMD Ethernet driver.
+ *
+ * Each Ethernet driver acts as a PCI driver and is represented by a generic
+ * *eth_driver* structure that holds:
+ *
+ * - An *rte_pci_driver* structure (which must be the first field).
+ *
+ * - The *eth_dev_init* function invoked for each matching PCI device.
+ *
+ * - The *eth_dev_uninit* function invoked for each matching PCI device.
+ *
+ * - The size of the private data to allocate for each matching device.
+ */
+struct eth_driver {
+	struct rte_pci_driver pci_drv;    /**< The PMD is also a PCI driver. */
+	eth_dev_init_t eth_dev_init;      /**< Device init function. */
+	eth_dev_uninit_t eth_dev_uninit;  /**< Device uninit function. */
+	unsigned int dev_private_size;    /**< Size of device private data. */
+};
+
+/**
+ * @internal
+ * A function invoked by the initialization function of an Ethernet driver
+ * to simultaneously register itself as a PCI driver and as an Ethernet
+ * Poll Mode Driver (PMD).
+ *
+ * @param eth_drv
+ *   The pointer to the *eth_driver* structure associated with
+ *   the Ethernet driver.
+ */
+void rte_eth_driver_register(struct eth_driver *eth_drv);
+
+/**
+ * Convert a numerical speed in Mbps to a bitmap flag that can be used in
+ * the bitmap link_speeds of the struct rte_eth_conf
+ *
+ * @param speed
+ *   Numerical speed value in Mbps
+ * @param duplex
+ *   ETH_LINK_[HALF/FULL]_DUPLEX (only for 10/100M speeds)
+ * @return
+ *   0 if the speed cannot be mapped
+ */
+uint32_t rte_eth_speed_bitflag(uint32_t speed, int duplex);
+
+/**
+ * Configure an Ethernet device.
+ * This function must be invoked first before any other function in the
+ * Ethernet API. This function can also be re-invoked when a device is in the
+ * stopped state.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device to configure.
+ * @param nb_rx_queue
+ *   The number of receive queues to set up for the Ethernet device.
+ * @param nb_tx_queue
+ *   The number of transmit queues to set up for the Ethernet device.
+ * @param eth_conf
+ *   The pointer to the configuration data to be used for the Ethernet device.
+ *   The *rte_eth_conf* structure includes:
+ *     -  the hardware offload features to activate, with dedicated fields for
+ *        each statically configurable offload hardware feature provided by
+ *        Ethernet devices, such as IP checksum or VLAN tag stripping for
+ *        example.
+ *     - the Receive Side Scaling (RSS) configuration when using multiple RX
+ *         queues per port.
+ *
+ *   Embedding all configuration information in a single data structure
+ *   is the more flexible method that allows the addition of new features
+ *   without changing the syntax of the API.
+ * @return
+ *   - 0: Success, device configured.
+ *   - <0: Error code returned by the driver configuration function.
+ */
+int rte_eth_dev_configure(uint8_t port_id, uint16_t nb_rx_queue,
+		uint16_t nb_tx_queue, const struct rte_eth_conf *eth_conf);
+
+/**
+ * Allocate and set up a receive queue for an Ethernet device.
+ *
+ * The function allocates a contiguous block of memory for *nb_rx_desc*
+ * receive descriptors from a memory zone associated with *socket_id*
+ * and initializes each receive descriptor with a network buffer allocated
+ * from the memory pool *mb_pool*.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param rx_queue_id
+ *   The index of the receive queue to set up.
+ *   The value must be in the range [0, nb_rx_queue - 1] previously supplied
+ *   to rte_eth_dev_configure().
+ * @param nb_rx_desc
+ *   The number of receive descriptors to allocate for the receive ring.
+ * @param socket_id
+ *   The *socket_id* argument is the socket identifier in case of NUMA.
+ *   The value can be *SOCKET_ID_ANY* if there is no NUMA constraint for
+ *   the DMA memory allocated for the receive descriptors of the ring.
+ * @param rx_conf
+ *   The pointer to the configuration data to be used for the receive queue.
+ *   NULL value is allowed, in which case default RX configuration
+ *   will be used.
+ *   The *rx_conf* structure contains an *rx_thresh* structure with the values
+ *   of the Prefetch, Host, and Write-Back threshold registers of the receive
+ *   ring.
+ * @param mb_pool
+ *   The pointer to the memory pool from which to allocate *rte_mbuf* network
+ *   memory buffers to populate each descriptor of the receive ring.
+ * @return
+ *   - 0: Success, receive queue correctly set up.
+ *   - -EINVAL: The size of network buffers which can be allocated from the
+ *      memory pool does not fit the various buffer sizes allowed by the
+ *      device controller.
+ *   - -ENOMEM: Unable to allocate the receive ring descriptors or to
+ *      allocate network memory buffers from the memory pool when
+ *      initializing receive descriptors.
+ */
+int rte_eth_rx_queue_setup(uint8_t port_id, uint16_t rx_queue_id,
+		uint16_t nb_rx_desc, unsigned int socket_id,
+		const struct rte_eth_rxconf *rx_conf,
+		struct rte_mempool *mb_pool);
+
+/**
+ * Allocate and set up a transmit queue for an Ethernet device.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param tx_queue_id
+ *   The index of the transmit queue to set up.
+ *   The value must be in the range [0, nb_tx_queue - 1] previously supplied
+ *   to rte_eth_dev_configure().
+ * @param nb_tx_desc
+ *   The number of transmit descriptors to allocate for the transmit ring.
+ * @param socket_id
+ *   The *socket_id* argument is the socket identifier in case of NUMA.
+ *   Its value can be *SOCKET_ID_ANY* if there is no NUMA constraint for
+ *   the DMA memory allocated for the transmit descriptors of the ring.
+ * @param tx_conf
+ *   The pointer to the configuration data to be used for the transmit queue.
+ *   NULL value is allowed, in which case default RX configuration
+ *   will be used.
+ *   The *tx_conf* structure contains the following data:
+ *   - The *tx_thresh* structure with the values of the Prefetch, Host, and
+ *     Write-Back threshold registers of the transmit ring.
+ *     When setting Write-Back threshold to the value greater then zero,
+ *     *tx_rs_thresh* value should be explicitly set to one.
+ *   - The *tx_free_thresh* value indicates the [minimum] number of network
+ *     buffers that must be pending in the transmit ring to trigger their
+ *     [implicit] freeing by the driver transmit function.
+ *   - The *tx_rs_thresh* value indicates the [minimum] number of transmit
+ *     descriptors that must be pending in the transmit ring before setting the
+ *     RS bit on a descriptor by the driver transmit function.
+ *     The *tx_rs_thresh* value should be less or equal then
+ *     *tx_free_thresh* value, and both of them should be less then
+ *     *nb_tx_desc* - 3.
+ *   - The *txq_flags* member contains flags to pass to the TX queue setup
+ *     function to configure the behavior of the TX queue. This should be set
+ *     to 0 if no special configuration is required.
+ *
+ *     Note that setting *tx_free_thresh* or *tx_rs_thresh* value to 0 forces
+ *     the transmit function to use default values.
+ * @return
+ *   - 0: Success, the transmit queue is correctly set up.
+ *   - -ENOMEM: Unable to allocate the transmit ring descriptors.
+ */
+int rte_eth_tx_queue_setup(uint8_t port_id, uint16_t tx_queue_id,
+		uint16_t nb_tx_desc, unsigned int socket_id,
+		const struct rte_eth_txconf *tx_conf);
+
+/*
+ * Return the NUMA socket to which an Ethernet device is connected
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device
+ * @return
+ *   The NUMA socket id to which the Ethernet device is connected or
+ *   a default of zero if the socket could not be determined.
+ *   -1 is returned is the port_id value is out of range.
+ */
+int rte_eth_dev_socket_id(uint8_t port_id);
+
+/*
+ * Check if port_id of device is attached
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device
+ * @return
+ *   - 0 if port is out of range or not attached
+ *   - 1 if device is attached
+ */
+int rte_eth_dev_is_valid_port(uint8_t port_id);
+
+/*
+ * Allocate mbuf from mempool, setup the DMA physical address
+ * and then start RX for specified queue of a port. It is used
+ * when rx_deferred_start flag of the specified queue is true.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device
+ * @param rx_queue_id
+ *   The index of the rx queue to update the ring.
+ *   The value must be in the range [0, nb_rx_queue - 1] previously supplied
+ *   to rte_eth_dev_configure().
+ * @return
+ *   - 0: Success, the transmit queue is correctly set up.
+ *   - -EINVAL: The port_id or the queue_id out of range.
+ *   - -ENOTSUP: The function not supported in PMD driver.
+ */
+int rte_eth_dev_rx_queue_start(uint8_t port_id, uint16_t rx_queue_id);
+
+/*
+ * Stop specified RX queue of a port
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device
+ * @param rx_queue_id
+ *   The index of the rx queue to update the ring.
+ *   The value must be in the range [0, nb_rx_queue - 1] previously supplied
+ *   to rte_eth_dev_configure().
+ * @return
+ *   - 0: Success, the transmit queue is correctly set up.
+ *   - -EINVAL: The port_id or the queue_id out of range.
+ *   - -ENOTSUP: The function not supported in PMD driver.
+ */
+int rte_eth_dev_rx_queue_stop(uint8_t port_id, uint16_t rx_queue_id);
+
+/*
+ * Start TX for specified queue of a port. It is used when tx_deferred_start
+ * flag of the specified queue is true.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device
+ * @param tx_queue_id
+ *   The index of the tx queue to update the ring.
+ *   The value must be in the range [0, nb_tx_queue - 1] previously supplied
+ *   to rte_eth_dev_configure().
+ * @return
+ *   - 0: Success, the transmit queue is correctly set up.
+ *   - -EINVAL: The port_id or the queue_id out of range.
+ *   - -ENOTSUP: The function not supported in PMD driver.
+ */
+int rte_eth_dev_tx_queue_start(uint8_t port_id, uint16_t tx_queue_id);
+
+/*
+ * Stop specified TX queue of a port
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device
+ * @param tx_queue_id
+ *   The index of the tx queue to update the ring.
+ *   The value must be in the range [0, nb_tx_queue - 1] previously supplied
+ *   to rte_eth_dev_configure().
+ * @return
+ *   - 0: Success, the transmit queue is correctly set up.
+ *   - -EINVAL: The port_id or the queue_id out of range.
+ *   - -ENOTSUP: The function not supported in PMD driver.
+ */
+int rte_eth_dev_tx_queue_stop(uint8_t port_id, uint16_t tx_queue_id);
+
+
+
+/**
+ * Start an Ethernet device.
+ *
+ * The device start step is the last one and consists of setting the configured
+ * offload features and in starting the transmit and the receive units of the
+ * device.
+ * On success, all basic functions exported by the Ethernet API (link status,
+ * receive/transmit, and so on) can be invoked.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @return
+ *   - 0: Success, Ethernet device started.
+ *   - <0: Error code of the driver device start function.
+ */
+int rte_eth_dev_start(uint8_t port_id);
+
+/**
+ * Stop an Ethernet device. The device can be restarted with a call to
+ * rte_eth_dev_start()
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ */
+void rte_eth_dev_stop(uint8_t port_id);
+
+
+/**
+ * Link up an Ethernet device.
+ *
+ * Set device link up will re-enable the device rx/tx
+ * functionality after it is previously set device linked down.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @return
+ *   - 0: Success, Ethernet device linked up.
+ *   - <0: Error code of the driver device link up function.
+ */
+int rte_eth_dev_set_link_up(uint8_t port_id);
+
+/**
+ * Link down an Ethernet device.
+ * The device rx/tx functionality will be disabled if success,
+ * and it can be re-enabled with a call to
+ * rte_eth_dev_set_link_up()
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ */
+int rte_eth_dev_set_link_down(uint8_t port_id);
+
+/**
+ * Close a stopped Ethernet device. The device cannot be restarted!
+ * The function frees all resources except for needed by the
+ * closed state. To free these resources, call rte_eth_dev_detach().
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ */
+void rte_eth_dev_close(uint8_t port_id);
+
+/**
+ * Enable receipt in promiscuous mode for an Ethernet device.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ */
+void rte_eth_promiscuous_enable(uint8_t port_id);
+
+/**
+ * Disable receipt in promiscuous mode for an Ethernet device.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ */
+void rte_eth_promiscuous_disable(uint8_t port_id);
+
+/**
+ * Return the value of promiscuous mode for an Ethernet device.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @return
+ *   - (1) if promiscuous is enabled
+ *   - (0) if promiscuous is disabled.
+ *   - (-1) on error
+ */
+int rte_eth_promiscuous_get(uint8_t port_id);
+
+/**
+ * Enable the receipt of any multicast frame by an Ethernet device.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ */
+void rte_eth_allmulticast_enable(uint8_t port_id);
+
+/**
+ * Disable the receipt of all multicast frames by an Ethernet device.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ */
+void rte_eth_allmulticast_disable(uint8_t port_id);
+
+/**
+ * Return the value of allmulticast mode for an Ethernet device.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @return
+ *   - (1) if allmulticast is enabled
+ *   - (0) if allmulticast is disabled.
+ *   - (-1) on error
+ */
+int rte_eth_allmulticast_get(uint8_t port_id);
+
+/**
+ * Retrieve the status (ON/OFF), the speed (in Mbps) and the mode (HALF-DUPLEX
+ * or FULL-DUPLEX) of the physical link of an Ethernet device. It might need
+ * to wait up to 9 seconds in it.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param link
+ *   A pointer to an *rte_eth_link* structure to be filled with
+ *   the status, the speed and the mode of the Ethernet device link.
+ */
+void rte_eth_link_get(uint8_t port_id, struct rte_eth_link *link);
+
+/**
+ * Retrieve the status (ON/OFF), the speed (in Mbps) and the mode (HALF-DUPLEX
+ * or FULL-DUPLEX) of the physical link of an Ethernet device. It is a no-wait
+ * version of rte_eth_link_get().
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param link
+ *   A pointer to an *rte_eth_link* structure to be filled with
+ *   the status, the speed and the mode of the Ethernet device link.
+ */
+void rte_eth_link_get_nowait(uint8_t port_id, struct rte_eth_link *link);
+
+/**
+ * Retrieve the general I/O statistics of an Ethernet device.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param stats
+ *   A pointer to a structure of type *rte_eth_stats* to be filled with
+ *   the values of device counters for the following set of statistics:
+ *   - *ipackets* with the total of successfully received packets.
+ *   - *opackets* with the total of successfully transmitted packets.
+ *   - *ibytes*   with the total of successfully received bytes.
+ *   - *obytes*   with the total of successfully transmitted bytes.
+ *   - *ierrors*  with the total of erroneous received packets.
+ *   - *oerrors*  with the total of failed transmitted packets.
+ * @return
+ *   Zero if successful. Non-zero otherwise.
+ */
+int rte_eth_stats_get(uint8_t port_id, struct rte_eth_stats *stats);
+
+/**
+ * Reset the general I/O statistics of an Ethernet device.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ */
+void rte_eth_stats_reset(uint8_t port_id);
+
+/**
+ * Retrieve extended statistics of an Ethernet device.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param xstats
+ *   A pointer to a table of structure of type *rte_eth_xstats*
+ *   to be filled with device statistics names and values.
+ *   This parameter can be set to NULL if n is 0.
+ * @param n
+ *   The size of the stats table, which should be large enough to store
+ *   all the statistics of the device.
+ * @return
+ *   - positive value lower or equal to n: success. The return value
+ *     is the number of entries filled in the stats table.
+ *   - positive value higher than n: error, the given statistics table
+ *     is too small. The return value corresponds to the size that should
+ *     be given to succeed. The entries in the table are not valid and
+ *     shall not be used by the caller.
+ *   - negative value on error (invalid port id)
+ */
+int rte_eth_xstats_get(uint8_t port_id, struct rte_eth_xstats *xstats,
+		unsigned n);
+
+/**
+ * Reset extended statistics of an Ethernet device.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ */
+void rte_eth_xstats_reset(uint8_t port_id);
+
+/**
+ *  Set a mapping for the specified transmit queue to the specified per-queue
+ *  statistics counter.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param tx_queue_id
+ *   The index of the transmit queue for which a queue stats mapping is required.
+ *   The value must be in the range [0, nb_tx_queue - 1] previously supplied
+ *   to rte_eth_dev_configure().
+ * @param stat_idx
+ *   The per-queue packet statistics functionality number that the transmit
+ *   queue is to be assigned.
+ *   The value must be in the range [0, RTE_MAX_ETHPORT_QUEUE_STATS_MAPS - 1].
+ * @return
+ *   Zero if successful. Non-zero otherwise.
+ */
+int rte_eth_dev_set_tx_queue_stats_mapping(uint8_t port_id,
+		uint16_t tx_queue_id, uint8_t stat_idx);
+
+/**
+ *  Set a mapping for the specified receive queue to the specified per-queue
+ *  statistics counter.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param rx_queue_id
+ *   The index of the receive queue for which a queue stats mapping is required.
+ *   The value must be in the range [0, nb_rx_queue - 1] previously supplied
+ *   to rte_eth_dev_configure().
+ * @param stat_idx
+ *   The per-queue packet statistics functionality number that the receive
+ *   queue is to be assigned.
+ *   The value must be in the range [0, RTE_MAX_ETHPORT_QUEUE_STATS_MAPS - 1].
+ * @return
+ *   Zero if successful. Non-zero otherwise.
+ */
+int rte_eth_dev_set_rx_queue_stats_mapping(uint8_t port_id,
+					   uint16_t rx_queue_id,
+					   uint8_t stat_idx);
+
+/**
+ * Retrieve the Ethernet address of an Ethernet device.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param mac_addr
+ *   A pointer to a structure of type *ether_addr* to be filled with
+ *   the Ethernet address of the Ethernet device.
+ */
+void rte_eth_macaddr_get(uint8_t port_id, struct ether_addr *mac_addr);
+
+/**
+ * Retrieve the contextual information of an Ethernet device.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param dev_info
+ *   A pointer to a structure of type *rte_eth_dev_info* to be filled with
+ *   the contextual information of the Ethernet device.
+ */
+void rte_eth_dev_info_get(uint8_t port_id, struct rte_eth_dev_info *dev_info);
+
+/**
+ * Retrieve the supported packet types of an Ethernet device.
+ *
+ * @note
+ *   Better to invoke this API after the device is already started or rx burst
+ *   function is decided, to obtain correct supported ptypes.
+ * @note
+ *   if a given PMD does not report what ptypes it supports, then the supported
+ *   ptype count is reported as 0.
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param ptype_mask
+ *   A hint of what kind of packet type which the caller is interested in.
+ * @param ptypes
+ *   An array pointer to store adequent packet types, allocated by caller.
+ * @param num
+ *  Size of the array pointed by param ptypes.
+ * @return
+ *   - (>=0) Number of supported ptypes. If the number of types exceeds num,
+ *           only num entries will be filled into the ptypes array, but the full
+ *           count of supported ptypes will be returned.
+ *   - (-ENODEV) if *port_id* invalid.
+ */
+int rte_eth_dev_get_supported_ptypes(uint8_t port_id, uint32_t ptype_mask,
+				     uint32_t *ptypes, int num);
+
+/**
+ * Retrieve the MTU of an Ethernet device.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param mtu
+ *   A pointer to a uint16_t where the retrieved MTU is to be stored.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENODEV) if *port_id* invalid.
+ */
+int rte_eth_dev_get_mtu(uint8_t port_id, uint16_t *mtu);
+
+/**
+ * Change the MTU of an Ethernet device.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param mtu
+ *   A uint16_t for the MTU to be applied.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if operation is not supported.
+ *   - (-ENODEV) if *port_id* invalid.
+ *   - (-EINVAL) if *mtu* invalid.
+ */
+int rte_eth_dev_set_mtu(uint8_t port_id, uint16_t mtu);
+
+/**
+ * Enable/Disable hardware filtering by an Ethernet device of received
+ * VLAN packets tagged with a given VLAN Tag Identifier.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param vlan_id
+ *   The VLAN Tag Identifier whose filtering must be enabled or disabled.
+ * @param on
+ *   If > 0, enable VLAN filtering of VLAN packets tagged with *vlan_id*.
+ *   Otherwise, disable VLAN filtering of VLAN packets tagged with *vlan_id*.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOSUP) if hardware-assisted VLAN filtering not configured.
+ *   - (-ENODEV) if *port_id* invalid.
+ *   - (-ENOSYS) if VLAN filtering on *port_id* disabled.
+ *   - (-EINVAL) if *vlan_id* > 4095.
+ */
+int rte_eth_dev_vlan_filter(uint8_t port_id, uint16_t vlan_id, int on);
+
+/**
+ * Enable/Disable hardware VLAN Strip by a rx queue of an Ethernet device.
+ * 82599/X540/X550 can support VLAN stripping at the rx queue level
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param rx_queue_id
+ *   The index of the receive queue for which a queue stats mapping is required.
+ *   The value must be in the range [0, nb_rx_queue - 1] previously supplied
+ *   to rte_eth_dev_configure().
+ * @param on
+ *   If 1, Enable VLAN Stripping of the receive queue of the Ethernet port.
+ *   If 0, Disable VLAN Stripping of the receive queue of the Ethernet port.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOSUP) if hardware-assisted VLAN stripping not configured.
+ *   - (-ENODEV) if *port_id* invalid.
+ *   - (-EINVAL) if *rx_queue_id* invalid.
+ */
+int rte_eth_dev_set_vlan_strip_on_queue(uint8_t port_id, uint16_t rx_queue_id,
+		int on);
+
+/**
+ * Set the Outer VLAN Ether Type by an Ethernet device, it can be inserted to
+ * the VLAN Header. This is a register setup available on some Intel NIC, not
+ * but all, please check the data sheet for availability.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param vlan_type
+ *   The vlan type.
+ * @param tag_type
+ *   The Tag Protocol ID
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOSUP) if hardware-assisted VLAN TPID setup is not supported.
+ *   - (-ENODEV) if *port_id* invalid.
+ */
+int rte_eth_dev_set_vlan_ether_type(uint8_t port_id,
+				    enum rte_vlan_type vlan_type,
+				    uint16_t tag_type);
+
+/**
+ * Set VLAN offload configuration on an Ethernet device
+ * Enable/Disable Extended VLAN by an Ethernet device, This is a register setup
+ * available on some Intel NIC, not but all, please check the data sheet for
+ * availability.
+ * Enable/Disable VLAN Strip can be done on rx queue for certain NIC, but here
+ * the configuration is applied on the port level.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param offload_mask
+ *   The VLAN Offload bit mask can be mixed use with "OR"
+ *       ETH_VLAN_STRIP_OFFLOAD
+ *       ETH_VLAN_FILTER_OFFLOAD
+ *       ETH_VLAN_EXTEND_OFFLOAD
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOSUP) if hardware-assisted VLAN filtering not configured.
+ *   - (-ENODEV) if *port_id* invalid.
+ */
+int rte_eth_dev_set_vlan_offload(uint8_t port_id, int offload_mask);
+
+/**
+ * Read VLAN Offload configuration from an Ethernet device
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @return
+ *   - (>0) if successful. Bit mask to indicate
+ *       ETH_VLAN_STRIP_OFFLOAD
+ *       ETH_VLAN_FILTER_OFFLOAD
+ *       ETH_VLAN_EXTEND_OFFLOAD
+ *   - (-ENODEV) if *port_id* invalid.
+ */
+int rte_eth_dev_get_vlan_offload(uint8_t port_id);
+
+/**
+ * Set port based TX VLAN insersion on or off.
+ *
+ * @param port_id
+ *  The port identifier of the Ethernet device.
+ * @param pvid
+ *  Port based TX VLAN identifier togeth with user priority.
+ * @param on
+ *  Turn on or off the port based TX VLAN insertion.
+ *
+ * @return
+ *   - (0) if successful.
+ *   - negative if failed.
+ */
+int rte_eth_dev_set_vlan_pvid(uint8_t port_id, uint16_t pvid, int on);
+
+/**
+ *
+ * Retrieve a burst of input packets from a receive queue of an Ethernet
+ * device. The retrieved packets are stored in *rte_mbuf* structures whose
+ * pointers are supplied in the *rx_pkts* array.
+ *
+ * The rte_eth_rx_burst() function loops, parsing the RX ring of the
+ * receive queue, up to *nb_pkts* packets, and for each completed RX
+ * descriptor in the ring, it performs the following operations:
+ *
+ * - Initialize the *rte_mbuf* data structure associated with the
+ *   RX descriptor according to the information provided by the NIC into
+ *   that RX descriptor.
+ *
+ * - Store the *rte_mbuf* data structure into the next entry of the
+ *   *rx_pkts* array.
+ *
+ * - Replenish the RX descriptor with a new *rte_mbuf* buffer
+ *   allocated from the memory pool associated with the receive queue at
+ *   initialization time.
+ *
+ * When retrieving an input packet that was scattered by the controller
+ * into multiple receive descriptors, the rte_eth_rx_burst() function
+ * appends the associated *rte_mbuf* buffers to the first buffer of the
+ * packet.
+ *
+ * The rte_eth_rx_burst() function returns the number of packets
+ * actually retrieved, which is the number of *rte_mbuf* data structures
+ * effectively supplied into the *rx_pkts* array.
+ * A return value equal to *nb_pkts* indicates that the RX queue contained
+ * at least *rx_pkts* packets, and this is likely to signify that other
+ * received packets remain in the input queue. Applications implementing
+ * a "retrieve as much received packets as possible" policy can check this
+ * specific case and keep invoking the rte_eth_rx_burst() function until
+ * a value less than *nb_pkts* is returned.
+ *
+ * This receive method has the following advantages:
+ *
+ * - It allows a run-to-completion network stack engine to retrieve and
+ *   to immediately process received packets in a fast burst-oriented
+ *   approach, avoiding the overhead of unnecessary intermediate packet
+ *   queue/dequeue operations.
+ *
+ * - Conversely, it also allows an asynchronous-oriented processing
+ *   method to retrieve bursts of received packets and to immediately
+ *   queue them for further parallel processing by another logical core,
+ *   for instance. However, instead of having received packets being
+ *   individually queued by the driver, this approach allows the invoker
+ *   of the rte_eth_rx_burst() function to queue a burst of retrieved
+ *   packets at a time and therefore dramatically reduce the cost of
+ *   enqueue/dequeue operations per packet.
+ *
+ * - It allows the rte_eth_rx_burst() function of the driver to take
+ *   advantage of burst-oriented hardware features (CPU cache,
+ *   prefetch instructions, and so on) to minimize the number of CPU
+ *   cycles per packet.
+ *
+ * To summarize, the proposed receive API enables many
+ * burst-oriented optimizations in both synchronous and asynchronous
+ * packet processing environments with no overhead in both cases.
+ *
+ * The rte_eth_rx_burst() function does not provide any error
+ * notification to avoid the corresponding overhead. As a hint, the
+ * upper-level application might check the status of the device link once
+ * being systematically returned a 0 value for a given number of tries.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param queue_id
+ *   The index of the receive queue from which to retrieve input packets.
+ *   The value must be in the range [0, nb_rx_queue - 1] previously supplied
+ *   to rte_eth_dev_configure().
+ * @param rx_pkts
+ *   The address of an array of pointers to *rte_mbuf* structures that
+ *   must be large enough to store *nb_pkts* pointers in it.
+ * @param nb_pkts
+ *   The maximum number of packets to retrieve.
+ * @return
+ *   The number of packets actually retrieved, which is the number
+ *   of pointers to *rte_mbuf* structures effectively supplied to the
+ *   *rx_pkts* array.
+ */
+static inline uint16_t
+rte_eth_rx_burst(uint8_t port_id, uint16_t queue_id,
+		 struct rte_mbuf **rx_pkts, const uint16_t nb_pkts)
+{
+	struct rte_eth_dev *dev = &rte_eth_devices[port_id];
+
+#ifdef RTE_LIBRTE_ETHDEV_DEBUG
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, 0);
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->rx_pkt_burst, 0);
+
+	if (queue_id >= dev->data->nb_rx_queues) {
+		RTE_PMD_DEBUG_TRACE("Invalid RX queue_id=%d\n", queue_id);
+		return 0;
+	}
+#endif
+	int16_t nb_rx = (*dev->rx_pkt_burst)(dev->data->rx_queues[queue_id],
+			rx_pkts, nb_pkts);
+
+#ifdef RTE_ETHDEV_RXTX_CALLBACKS
+	struct rte_eth_rxtx_callback *cb = dev->post_rx_burst_cbs[queue_id];
+
+	if (unlikely(cb != NULL)) {
+		do {
+			nb_rx = cb->fn.rx(port_id, queue_id, rx_pkts, nb_rx,
+						nb_pkts, cb->param);
+			cb = cb->next;
+		} while (cb != NULL);
+	}
+#endif
+
+	return nb_rx;
+}
+
+/**
+ * Get the number of used descriptors in a specific queue
+ *
+ * @param port_id
+ *  The port identifier of the Ethernet device.
+ * @param queue_id
+ *  The queue id on the specific port.
+ * @return
+ *  The number of used descriptors in the specific queue, or:
+ *     (-EINVAL) if *port_id* is invalid
+ *     (-ENOTSUP) if the device does not support this function
+ */
+static inline int
+rte_eth_rx_queue_count(uint8_t port_id, uint16_t queue_id)
+{
+	struct rte_eth_dev *dev = &rte_eth_devices[port_id];
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_queue_count, -ENOTSUP);
+        return (*dev->dev_ops->rx_queue_count)(dev, queue_id);
+}
+
+/**
+ * Check if the DD bit of the specific RX descriptor in the queue has been set
+ *
+ * @param port_id
+ *  The port identifier of the Ethernet device.
+ * @param queue_id
+ *  The queue id on the specific port.
+ * @param offset
+ *  The offset of the descriptor ID from tail.
+ * @return
+ *  - (1) if the specific DD bit is set.
+ *  - (0) if the specific DD bit is not set.
+ *  - (-ENODEV) if *port_id* invalid.
+ *  - (-ENOTSUP) if the device does not support this function
+ */
+static inline int
+rte_eth_rx_descriptor_done(uint8_t port_id, uint16_t queue_id, uint16_t offset)
+{
+	struct rte_eth_dev *dev = &rte_eth_devices[port_id];
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_descriptor_done, -ENOTSUP);
+	return (*dev->dev_ops->rx_descriptor_done)( \
+		dev->data->rx_queues[queue_id], offset);
+}
+
+/**
+ * Send a burst of output packets on a transmit queue of an Ethernet device.
+ *
+ * The rte_eth_tx_burst() function is invoked to transmit output packets
+ * on the output queue *queue_id* of the Ethernet device designated by its
+ * *port_id*.
+ * The *nb_pkts* parameter is the number of packets to send which are
+ * supplied in the *tx_pkts* array of *rte_mbuf* structures.
+ * The rte_eth_tx_burst() function loops, sending *nb_pkts* packets,
+ * up to the number of transmit descriptors available in the TX ring of the
+ * transmit queue.
+ * For each packet to send, the rte_eth_tx_burst() function performs
+ * the following operations:
+ *
+ * - Pick up the next available descriptor in the transmit ring.
+ *
+ * - Free the network buffer previously sent with that descriptor, if any.
+ *
+ * - Initialize the transmit descriptor with the information provided
+ *   in the *rte_mbuf data structure.
+ *
+ * In the case of a segmented packet composed of a list of *rte_mbuf* buffers,
+ * the rte_eth_tx_burst() function uses several transmit descriptors
+ * of the ring.
+ *
+ * The rte_eth_tx_burst() function returns the number of packets it
+ * actually sent. A return value equal to *nb_pkts* means that all packets
+ * have been sent, and this is likely to signify that other output packets
+ * could be immediately transmitted again. Applications that implement a
+ * "send as many packets to transmit as possible" policy can check this
+ * specific case and keep invoking the rte_eth_tx_burst() function until
+ * a value less than *nb_pkts* is returned.
+ *
+ * It is the responsibility of the rte_eth_tx_burst() function to
+ * transparently free the memory buffers of packets previously sent.
+ * This feature is driven by the *tx_free_thresh* value supplied to the
+ * rte_eth_dev_configure() function at device configuration time.
+ * When the number of free TX descriptors drops below this threshold, the
+ * rte_eth_tx_burst() function must [attempt to] free the *rte_mbuf*  buffers
+ * of those packets whose transmission was effectively completed.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param queue_id
+ *   The index of the transmit queue through which output packets must be
+ *   sent.
+ *   The value must be in the range [0, nb_tx_queue - 1] previously supplied
+ *   to rte_eth_dev_configure().
+ * @param tx_pkts
+ *   The address of an array of *nb_pkts* pointers to *rte_mbuf* structures
+ *   which contain the output packets.
+ * @param nb_pkts
+ *   The maximum number of packets to transmit.
+ * @return
+ *   The number of output packets actually stored in transmit descriptors of
+ *   the transmit ring. The return value can be less than the value of the
+ *   *tx_pkts* parameter when the transmit ring is full or has been filled up.
+ */
+static inline uint16_t
+rte_eth_tx_burst(uint8_t port_id, uint16_t queue_id,
+		 struct rte_mbuf **tx_pkts, uint16_t nb_pkts)
+{
+	struct rte_eth_dev *dev = &rte_eth_devices[port_id];
+
+#ifdef RTE_LIBRTE_ETHDEV_DEBUG
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, 0);
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->tx_pkt_burst, 0);
+
+	if (queue_id >= dev->data->nb_tx_queues) {
+		RTE_PMD_DEBUG_TRACE("Invalid TX queue_id=%d\n", queue_id);
+		return 0;
+	}
+#endif
+
+#ifdef RTE_ETHDEV_RXTX_CALLBACKS
+	struct rte_eth_rxtx_callback *cb = dev->pre_tx_burst_cbs[queue_id];
+
+	if (unlikely(cb != NULL)) {
+		do {
+			nb_pkts = cb->fn.tx(port_id, queue_id, tx_pkts, nb_pkts,
+					cb->param);
+			cb = cb->next;
+		} while (cb != NULL);
+	}
+#endif
+
+	return (*dev->tx_pkt_burst)(dev->data->tx_queues[queue_id], tx_pkts, nb_pkts);
+}
+
+typedef void (*buffer_tx_error_fn)(struct rte_mbuf **unsent, uint16_t count,
+		void *userdata);
+
+/**
+ * Structure used to buffer packets for future TX
+ * Used by APIs rte_eth_tx_buffer and rte_eth_tx_buffer_flush
+ */
+struct rte_eth_dev_tx_buffer {
+	buffer_tx_error_fn error_callback;
+	void *error_userdata;
+	uint16_t size;           /**< Size of buffer for buffered tx */
+	uint16_t length;         /**< Number of packets in the array */
+	struct rte_mbuf *pkts[];
+	/**< Pending packets to be sent on explicit flush or when full */
+};
+
+/**
+ * Calculate the size of the tx buffer.
+ *
+ * @param sz
+ *   Number of stored packets.
+ */
+#define RTE_ETH_TX_BUFFER_SIZE(sz) \
+	(sizeof(struct rte_eth_dev_tx_buffer) + (sz) * sizeof(struct rte_mbuf *))
+
+/**
+ * Initialize default values for buffered transmitting
+ *
+ * @param buffer
+ *   Tx buffer to be initialized.
+ * @param size
+ *   Buffer size
+ * @return
+ *   0 if no error
+ */
+int
+rte_eth_tx_buffer_init(struct rte_eth_dev_tx_buffer *buffer, uint16_t size);
+
+/**
+ * Send any packets queued up for transmission on a port and HW queue
+ *
+ * This causes an explicit flush of packets previously buffered via the
+ * rte_eth_tx_buffer() function. It returns the number of packets successfully
+ * sent to the NIC, and calls the error callback for any unsent packets. Unless
+ * explicitly set up otherwise, the default callback simply frees the unsent
+ * packets back to the owning mempool.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param queue_id
+ *   The index of the transmit queue through which output packets must be
+ *   sent.
+ *   The value must be in the range [0, nb_tx_queue - 1] previously supplied
+ *   to rte_eth_dev_configure().
+ * @param buffer
+ *   Buffer of packets to be transmit.
+ * @return
+ *   The number of packets successfully sent to the Ethernet device. The error
+ *   callback is called for any packets which could not be sent.
+ */
+static inline uint16_t
+rte_eth_tx_buffer_flush(uint8_t port_id, uint16_t queue_id,
+		struct rte_eth_dev_tx_buffer *buffer)
+{
+	uint16_t sent;
+	uint16_t to_send = buffer->length;
+
+	if (to_send == 0)
+		return 0;
+
+	sent = rte_eth_tx_burst(port_id, queue_id, buffer->pkts, to_send);
+
+	buffer->length = 0;
+
+	/* All packets sent, or to be dealt with by callback below */
+	if (unlikely(sent != to_send))
+		buffer->error_callback(&buffer->pkts[sent], to_send - sent,
+				buffer->error_userdata);
+
+	return sent;
+}
+
+/**
+ * Buffer a single packet for future transmission on a port and queue
+ *
+ * This function takes a single mbuf/packet and buffers it for later
+ * transmission on the particular port and queue specified. Once the buffer is
+ * full of packets, an attempt will be made to transmit all the buffered
+ * packets. In case of error, where not all packets can be transmitted, a
+ * callback is called with the unsent packets as a parameter. If no callback
+ * is explicitly set up, the unsent packets are just freed back to the owning
+ * mempool. The function returns the number of packets actually sent i.e.
+ * 0 if no buffer flush occurred, otherwise the number of packets successfully
+ * flushed
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param queue_id
+ *   The index of the transmit queue through which output packets must be
+ *   sent.
+ *   The value must be in the range [0, nb_tx_queue - 1] previously supplied
+ *   to rte_eth_dev_configure().
+ * @param buffer
+ *   Buffer used to collect packets to be sent.
+ * @param tx_pkt
+ *   Pointer to the packet mbuf to be sent.
+ * @return
+ *   0 = packet has been buffered for later transmission
+ *   N > 0 = packet has been buffered, and the buffer was subsequently flushed,
+ *     causing N packets to be sent, and the error callback to be called for
+ *     the rest.
+ */
+static inline uint16_t __attribute__((always_inline))
+rte_eth_tx_buffer(uint8_t port_id, uint16_t queue_id,
+		struct rte_eth_dev_tx_buffer *buffer, struct rte_mbuf *tx_pkt)
+{
+	buffer->pkts[buffer->length++] = tx_pkt;
+	if (buffer->length < buffer->size)
+		return 0;
+
+	return rte_eth_tx_buffer_flush(port_id, queue_id, buffer);
+}
+
+/**
+ * Configure a callback for buffered packets which cannot be sent
+ *
+ * Register a specific callback to be called when an attempt is made to send
+ * all packets buffered on an ethernet port, but not all packets can
+ * successfully be sent. The callback registered here will be called only
+ * from calls to rte_eth_tx_buffer() and rte_eth_tx_buffer_flush() APIs.
+ * The default callback configured for each queue by default just frees the
+ * packets back to the calling mempool. If additional behaviour is required,
+ * for example, to count dropped packets, or to retry transmission of packets
+ * which cannot be sent, this function should be used to register a suitable
+ * callback function to implement the desired behaviour.
+ * The example callback "rte_eth_count_unsent_packet_callback()" is also
+ * provided as reference.
+ *
+ * @param buffer
+ *   The port identifier of the Ethernet device.
+ * @param callback
+ *   The function to be used as the callback.
+ * @param userdata
+ *   Arbitrary parameter to be passed to the callback function
+ * @return
+ *   0 on success, or -1 on error with rte_errno set appropriately
+ */
+int
+rte_eth_tx_buffer_set_err_callback(struct rte_eth_dev_tx_buffer *buffer,
+		buffer_tx_error_fn callback, void *userdata);
+
+/**
+ * Callback function for silently dropping unsent buffered packets.
+ *
+ * This function can be passed to rte_eth_tx_buffer_set_err_callback() to
+ * adjust the default behavior when buffered packets cannot be sent. This
+ * function drops any unsent packets silently and is used by tx buffered
+ * operations as default behavior.
+ *
+ * NOTE: this function should not be called directly, instead it should be used
+ *       as a callback for packet buffering.
+ *
+ * NOTE: when configuring this function as a callback with
+ *       rte_eth_tx_buffer_set_err_callback(), the final, userdata parameter
+ *       should point to an uint64_t value.
+ *
+ * @param pkts
+ *   The previously buffered packets which could not be sent
+ * @param unsent
+ *   The number of unsent packets in the pkts array
+ * @param userdata
+ *   Not used
+ */
+void
+rte_eth_tx_buffer_drop_callback(struct rte_mbuf **pkts, uint16_t unsent,
+		void *userdata);
+
+/**
+ * Callback function for tracking unsent buffered packets.
+ *
+ * This function can be passed to rte_eth_tx_buffer_set_err_callback() to
+ * adjust the default behavior when buffered packets cannot be sent. This
+ * function drops any unsent packets, but also updates a user-supplied counter
+ * to track the overall number of packets dropped. The counter should be an
+ * uint64_t variable.
+ *
+ * NOTE: this function should not be called directly, instead it should be used
+ *       as a callback for packet buffering.
+ *
+ * NOTE: when configuring this function as a callback with
+ *       rte_eth_tx_buffer_set_err_callback(), the final, userdata parameter
+ *       should point to an uint64_t value.
+ *
+ * @param pkts
+ *   The previously buffered packets which could not be sent
+ * @param unsent
+ *   The number of unsent packets in the pkts array
+ * @param userdata
+ *   Pointer to an uint64_t value, which will be incremented by unsent
+ */
+void
+rte_eth_tx_buffer_count_callback(struct rte_mbuf **pkts, uint16_t unsent,
+		void *userdata);
+
+/**
+ * The eth device event type for interrupt, and maybe others in the future.
+ */
+enum rte_eth_event_type {
+	RTE_ETH_EVENT_UNKNOWN,  /**< unknown event type */
+	RTE_ETH_EVENT_INTR_LSC, /**< lsc interrupt event */
+	RTE_ETH_EVENT_QUEUE_STATE,
+				/**< queue state event (enabled/disabled) */
+	RTE_ETH_EVENT_INTR_RESET,
+			/**< reset interrupt event, sent to VF on PF reset */
+	RTE_ETH_EVENT_MAX       /**< max value of this enum */
+};
+
+typedef void (*rte_eth_dev_cb_fn)(uint8_t port_id, \
+		enum rte_eth_event_type event, void *cb_arg);
+/**< user application callback to be registered for interrupts */
+
+
+
+/**
+ * Register a callback function for specific port id.
+ *
+ * @param port_id
+ *  Port id.
+ * @param event
+ *  Event interested.
+ * @param cb_fn
+ *  User supplied callback function to be called.
+ * @param cb_arg
+ *  Pointer to the parameters for the registered callback.
+ *
+ * @return
+ *  - On success, zero.
+ *  - On failure, a negative value.
+ */
+int rte_eth_dev_callback_register(uint8_t port_id,
+			enum rte_eth_event_type event,
+		rte_eth_dev_cb_fn cb_fn, void *cb_arg);
+
+/**
+ * Unregister a callback function for specific port id.
+ *
+ * @param port_id
+ *  Port id.
+ * @param event
+ *  Event interested.
+ * @param cb_fn
+ *  User supplied callback function to be called.
+ * @param cb_arg
+ *  Pointer to the parameters for the registered callback. -1 means to
+ *  remove all for the same callback address and same event.
+ *
+ * @return
+ *  - On success, zero.
+ *  - On failure, a negative value.
+ */
+int rte_eth_dev_callback_unregister(uint8_t port_id,
+			enum rte_eth_event_type event,
+		rte_eth_dev_cb_fn cb_fn, void *cb_arg);
+
+/**
+ * @internal Executes all the user application registered callbacks for
+ * the specific device. It is for DPDK internal user only. User
+ * application should not call it directly.
+ *
+ * @param dev
+ *  Pointer to struct rte_eth_dev.
+ * @param event
+ *  Eth device interrupt event type.
+ *
+ * @return
+ *  void
+ */
+void _rte_eth_dev_callback_process(struct rte_eth_dev *dev,
+				enum rte_eth_event_type event);
+
+/**
+ * When there is no rx packet coming in Rx Queue for a long time, we can
+ * sleep lcore related to RX Queue for power saving, and enable rx interrupt
+ * to be triggered when rx packect arrives.
+ *
+ * The rte_eth_dev_rx_intr_enable() function enables rx queue
+ * interrupt on specific rx queue of a port.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param queue_id
+ *   The index of the receive queue from which to retrieve input packets.
+ *   The value must be in the range [0, nb_rx_queue - 1] previously supplied
+ *   to rte_eth_dev_configure().
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if underlying hardware OR driver doesn't support
+ *     that operation.
+ *   - (-ENODEV) if *port_id* invalid.
+ */
+int rte_eth_dev_rx_intr_enable(uint8_t port_id, uint16_t queue_id);
+
+/**
+ * When lcore wakes up from rx interrupt indicating packet coming, disable rx
+ * interrupt and returns to polling mode.
+ *
+ * The rte_eth_dev_rx_intr_disable() function disables rx queue
+ * interrupt on specific rx queue of a port.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param queue_id
+ *   The index of the receive queue from which to retrieve input packets.
+ *   The value must be in the range [0, nb_rx_queue - 1] previously supplied
+ *   to rte_eth_dev_configure().
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if underlying hardware OR driver doesn't support
+ *     that operation.
+ *   - (-ENODEV) if *port_id* invalid.
+ */
+int rte_eth_dev_rx_intr_disable(uint8_t port_id, uint16_t queue_id);
+
+/**
+ * RX Interrupt control per port.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param epfd
+ *   Epoll instance fd which the intr vector associated to.
+ *   Using RTE_EPOLL_PER_THREAD allows to use per thread epoll instance.
+ * @param op
+ *   The operation be performed for the vector.
+ *   Operation type of {RTE_INTR_EVENT_ADD, RTE_INTR_EVENT_DEL}.
+ * @param data
+ *   User raw data.
+ * @return
+ *   - On success, zero.
+ *   - On failure, a negative value.
+ */
+int rte_eth_dev_rx_intr_ctl(uint8_t port_id, int epfd, int op, void *data);
+
+/**
+ * RX Interrupt control per queue.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param queue_id
+ *   The index of the receive queue from which to retrieve input packets.
+ *   The value must be in the range [0, nb_rx_queue - 1] previously supplied
+ *   to rte_eth_dev_configure().
+ * @param epfd
+ *   Epoll instance fd which the intr vector associated to.
+ *   Using RTE_EPOLL_PER_THREAD allows to use per thread epoll instance.
+ * @param op
+ *   The operation be performed for the vector.
+ *   Operation type of {RTE_INTR_EVENT_ADD, RTE_INTR_EVENT_DEL}.
+ * @param data
+ *   User raw data.
+ * @return
+ *   - On success, zero.
+ *   - On failure, a negative value.
+ */
+int rte_eth_dev_rx_intr_ctl_q(uint8_t port_id, uint16_t queue_id,
+			      int epfd, int op, void *data);
+
+/**
+ * Turn on the LED on the Ethernet device.
+ * This function turns on the LED on the Ethernet device.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if underlying hardware OR driver doesn't support
+ *     that operation.
+ *   - (-ENODEV) if *port_id* invalid.
+ */
+int  rte_eth_led_on(uint8_t port_id);
+
+/**
+ * Turn off the LED on the Ethernet device.
+ * This function turns off the LED on the Ethernet device.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if underlying hardware OR driver doesn't support
+ *     that operation.
+ *   - (-ENODEV) if *port_id* invalid.
+ */
+int  rte_eth_led_off(uint8_t port_id);
+
+/**
+ * Get current status of the Ethernet link flow control for Ethernet device
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param fc_conf
+ *   The pointer to the structure where to store the flow control parameters.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support flow control.
+ *   - (-ENODEV)  if *port_id* invalid.
+ */
+int rte_eth_dev_flow_ctrl_get(uint8_t port_id,
+			      struct rte_eth_fc_conf *fc_conf);
+
+/**
+ * Configure the Ethernet link flow control for Ethernet device
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param fc_conf
+ *   The pointer to the structure of the flow control parameters.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support flow control mode.
+ *   - (-ENODEV)  if *port_id* invalid.
+ *   - (-EINVAL)  if bad parameter
+ *   - (-EIO)     if flow control setup failure
+ */
+int rte_eth_dev_flow_ctrl_set(uint8_t port_id,
+			      struct rte_eth_fc_conf *fc_conf);
+
+/**
+ * Configure the Ethernet priority flow control under DCB environment
+ * for Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param pfc_conf
+ * The pointer to the structure of the priority flow control parameters.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support priority flow control mode.
+ *   - (-ENODEV)  if *port_id* invalid.
+ *   - (-EINVAL)  if bad parameter
+ *   - (-EIO)     if flow control setup failure
+ */
+int rte_eth_dev_priority_flow_ctrl_set(uint8_t port_id,
+				struct rte_eth_pfc_conf *pfc_conf);
+
+/**
+ * Add a MAC address to an internal array of addresses used to enable whitelist
+ * filtering to accept packets only if the destination MAC address matches.
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param mac_addr
+ *   The MAC address to add.
+ * @param pool
+ *   VMDq pool index to associate address with (if VMDq is enabled). If VMDq is
+ *   not enabled, this should be set to 0.
+ * @return
+ *   - (0) if successfully added or *mac_addr" was already added.
+ *   - (-ENOTSUP) if hardware doesn't support this feature.
+ *   - (-ENODEV) if *port* is invalid.
+ *   - (-ENOSPC) if no more MAC addresses can be added.
+ *   - (-EINVAL) if MAC address is invalid.
+ */
+int rte_eth_dev_mac_addr_add(uint8_t port, struct ether_addr *mac_addr,
+				uint32_t pool);
+
+/**
+ * Remove a MAC address from the internal array of addresses.
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param mac_addr
+ *   MAC address to remove.
+ * @return
+ *   - (0) if successful, or *mac_addr* didn't exist.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-ENODEV) if *port* invalid.
+ *   - (-EADDRINUSE) if attempting to remove the default MAC address
+ */
+int rte_eth_dev_mac_addr_remove(uint8_t port, struct ether_addr *mac_addr);
+
+/**
+ * Set the default MAC address.
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param mac_addr
+ *   New default MAC address.
+ * @return
+ *   - (0) if successful, or *mac_addr* didn't exist.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-ENODEV) if *port* invalid.
+ *   - (-EINVAL) if MAC address is invalid.
+ */
+int rte_eth_dev_default_mac_addr_set(uint8_t port, struct ether_addr *mac_addr);
+
+
+/**
+ * Update Redirection Table(RETA) of Receive Side Scaling of Ethernet device.
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param reta_conf
+ *   RETA to update.
+ * @param reta_size
+ *   Redirection table size. The table size can be queried by
+ *   rte_eth_dev_info_get().
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_eth_dev_rss_reta_update(uint8_t port,
+				struct rte_eth_rss_reta_entry64 *reta_conf,
+				uint16_t reta_size);
+
+ /**
+ * Query Redirection Table(RETA) of Receive Side Scaling of Ethernet device.
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param reta_conf
+ *   RETA to query.
+ * @param reta_size
+ *   Redirection table size. The table size can be queried by
+ *   rte_eth_dev_info_get().
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_eth_dev_rss_reta_query(uint8_t port,
+			       struct rte_eth_rss_reta_entry64 *reta_conf,
+			       uint16_t reta_size);
+
+ /**
+ * Updates unicast hash table for receiving packet with the given destination
+ * MAC address, and the packet is routed to all VFs for which the RX mode is
+ * accept packets that match the unicast hash table.
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param addr
+ *   Unicast MAC address.
+ * @param on
+ *    1 - Set an unicast hash bit for receiving packets with the MAC address.
+ *    0 - Clear an unicast hash bit.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+  *  - (-ENODEV) if *port_id* invalid.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_eth_dev_uc_hash_table_set(uint8_t port,struct ether_addr *addr,
+					uint8_t on);
+
+ /**
+ * Updates all unicast hash bitmaps for receiving packet with any Unicast
+ * Ethernet MAC addresses,the packet is routed to all VFs for which the RX
+ * mode is accept packets that match the unicast hash table.
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param on
+ *    1 - Set all unicast hash bitmaps for receiving all the Ethernet
+ *         MAC addresses
+ *    0 - Clear all unicast hash bitmaps
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+  *  - (-ENODEV) if *port_id* invalid.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_eth_dev_uc_all_hash_table_set(uint8_t port,uint8_t on);
+
+ /**
+ * Set RX L2 Filtering mode of a VF of an Ethernet device.
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param vf
+ *   VF id.
+ * @param rx_mode
+ *    The RX mode mask, which  is one or more of  accepting Untagged Packets,
+ *    packets that match the PFUTA table, Broadcast and Multicast Promiscuous.
+ *    ETH_VMDQ_ACCEPT_UNTAG,ETH_VMDQ_ACCEPT_HASH_UC,
+ *    ETH_VMDQ_ACCEPT_BROADCAST and ETH_VMDQ_ACCEPT_MULTICAST will be used
+ *    in rx_mode.
+ * @param on
+ *    1 - Enable a VF RX mode.
+ *    0 - Disable a VF RX mode.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_eth_dev_set_vf_rxmode(uint8_t port, uint16_t vf, uint16_t rx_mode,
+				uint8_t on);
+
+/**
+* Enable or disable a VF traffic transmit of the Ethernet device.
+*
+* @param port
+*   The port identifier of the Ethernet device.
+* @param vf
+*   VF id.
+* @param on
+*    1 - Enable a VF traffic transmit.
+*    0 - Disable a VF traffic transmit.
+* @return
+*   - (0) if successful.
+*   - (-ENODEV) if *port_id* invalid.
+*   - (-ENOTSUP) if hardware doesn't support.
+*   - (-EINVAL) if bad parameter.
+*/
+int
+rte_eth_dev_set_vf_tx(uint8_t port,uint16_t vf, uint8_t on);
+
+/**
+* Enable or disable a VF traffic receive of an Ethernet device.
+*
+* @param port
+*   The port identifier of the Ethernet device.
+* @param vf
+*   VF id.
+* @param on
+*    1 - Enable a VF traffic receive.
+*    0 - Disable a VF traffic receive.
+* @return
+*   - (0) if successful.
+*   - (-ENOTSUP) if hardware doesn't support.
+*   - (-ENODEV) if *port_id* invalid.
+*   - (-EINVAL) if bad parameter.
+*/
+int
+rte_eth_dev_set_vf_rx(uint8_t port,uint16_t vf, uint8_t on);
+
+/**
+* Enable/Disable hardware VF VLAN filtering by an Ethernet device of
+* received VLAN packets tagged with a given VLAN Tag Identifier.
+*
+* @param port id
+*   The port identifier of the Ethernet device.
+* @param vlan_id
+*   The VLAN Tag Identifier whose filtering must be enabled or disabled.
+* @param vf_mask
+*    Bitmap listing which VFs participate in the VLAN filtering.
+* @param vlan_on
+*    1 - Enable VFs VLAN filtering.
+*    0 - Disable VFs VLAN filtering.
+* @return
+*   - (0) if successful.
+*   - (-ENOTSUP) if hardware doesn't support.
+*   - (-ENODEV) if *port_id* invalid.
+*   - (-EINVAL) if bad parameter.
+*/
+int
+rte_eth_dev_set_vf_vlan_filter(uint8_t port, uint16_t vlan_id,
+				uint64_t vf_mask,
+				uint8_t vlan_on);
+
+/**
+ * Set a traffic mirroring rule on an Ethernet device
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param mirror_conf
+ *   The pointer to the traffic mirroring structure describing the mirroring rule.
+ *   The *rte_eth_vm_mirror_conf* structure includes the type of mirroring rule,
+ *   destination pool and the value of rule if enable vlan or pool mirroring.
+ *
+ * @param rule_id
+ *   The index of traffic mirroring rule, we support four separated rules.
+ * @param on
+ *   1 - Enable a mirroring rule.
+ *   0 - Disable a mirroring rule.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support this feature.
+ *   - (-ENODEV) if *port_id* invalid.
+ *   - (-EINVAL) if the mr_conf information is not correct.
+ */
+int rte_eth_mirror_rule_set(uint8_t port_id,
+			struct rte_eth_mirror_conf *mirror_conf,
+			uint8_t rule_id,
+			uint8_t on);
+
+/**
+ * Reset a traffic mirroring rule on an Ethernet device.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param rule_id
+ *   The index of traffic mirroring rule, we support four separated rules.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support this feature.
+ *   - (-ENODEV) if *port_id* invalid.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_eth_mirror_rule_reset(uint8_t port_id,
+					 uint8_t rule_id);
+
+/**
+ * Set the rate limitation for a queue on an Ethernet device.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param queue_idx
+ *   The queue id.
+ * @param tx_rate
+ *   The tx rate in Mbps. Allocated from the total port link speed.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support this feature.
+ *   - (-ENODEV) if *port_id* invalid.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_eth_set_queue_rate_limit(uint8_t port_id, uint16_t queue_idx,
+			uint16_t tx_rate);
+
+/**
+ * Set the rate limitation for a vf on an Ethernet device.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param vf
+ *   VF id.
+ * @param tx_rate
+ *   The tx rate allocated from the total link speed for this VF id.
+ * @param q_msk
+ *   The queue mask which need to set the rate.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support this feature.
+ *   - (-ENODEV) if *port_id* invalid.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_eth_set_vf_rate_limit(uint8_t port_id, uint16_t vf,
+			uint16_t tx_rate, uint64_t q_msk);
+
+/**
+ * Initialize bypass logic. This function needs to be called before
+ * executing any other bypass API.
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_eth_dev_bypass_init(uint8_t port);
+
+/**
+ * Return bypass state.
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param state
+ *   The return bypass state.
+ *   - (1) Normal mode
+ *   - (2) Bypass mode
+ *   - (3) Isolate mode
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_eth_dev_bypass_state_show(uint8_t port, uint32_t *state);
+
+/**
+ * Set bypass state
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param new_state
+ *   The current bypass state.
+ *   - (1) Normal mode
+ *   - (2) Bypass mode
+ *   - (3) Isolate mode
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_eth_dev_bypass_state_set(uint8_t port, uint32_t *new_state);
+
+/**
+ * Return bypass state when given event occurs.
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param event
+ *   The bypass event
+ *   - (1) Main power on (power button is pushed)
+ *   - (2) Auxiliary power on (power supply is being plugged)
+ *   - (3) Main power off (system shutdown and power supply is left plugged in)
+ *   - (4) Auxiliary power off (power supply is being unplugged)
+ *   - (5) Display or set the watchdog timer
+ * @param state
+ *   The bypass state when given event occurred.
+ *   - (1) Normal mode
+ *   - (2) Bypass mode
+ *   - (3) Isolate mode
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_eth_dev_bypass_event_show(uint8_t port, uint32_t event, uint32_t *state);
+
+/**
+ * Set bypass state when given event occurs.
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param event
+ *   The bypass event
+ *   - (1) Main power on (power button is pushed)
+ *   - (2) Auxiliary power on (power supply is being plugged)
+ *   - (3) Main power off (system shutdown and power supply is left plugged in)
+ *   - (4) Auxiliary power off (power supply is being unplugged)
+ *   - (5) Display or set the watchdog timer
+ * @param state
+ *   The assigned state when given event occurs.
+ *   - (1) Normal mode
+ *   - (2) Bypass mode
+ *   - (3) Isolate mode
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_eth_dev_bypass_event_store(uint8_t port, uint32_t event, uint32_t state);
+
+/**
+ * Set bypass watchdog timeout count.
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param timeout
+ *   The timeout to be set.
+ *   - (0) 0 seconds (timer is off)
+ *   - (1) 1.5 seconds
+ *   - (2) 2 seconds
+ *   - (3) 3 seconds
+ *   - (4) 4 seconds
+ *   - (5) 8 seconds
+ *   - (6) 16 seconds
+ *   - (7) 32 seconds
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_eth_dev_wd_timeout_store(uint8_t port, uint32_t timeout);
+
+/**
+ * Get bypass firmware version.
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param ver
+ *   The firmware version
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_eth_dev_bypass_ver_show(uint8_t port, uint32_t *ver);
+
+/**
+ * Return bypass watchdog timeout in seconds
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param wd_timeout
+ *   The return watchdog timeout. "0" represents timer expired
+ *   - (0) 0 seconds (timer is off)
+ *   - (1) 1.5 seconds
+ *   - (2) 2 seconds
+ *   - (3) 3 seconds
+ *   - (4) 4 seconds
+ *   - (5) 8 seconds
+ *   - (6) 16 seconds
+ *   - (7) 32 seconds
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_eth_dev_bypass_wd_timeout_show(uint8_t port, uint32_t *wd_timeout);
+
+/**
+ * Reset bypass watchdog timer
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_eth_dev_bypass_wd_reset(uint8_t port);
+
+ /**
+ * Configuration of Receive Side Scaling hash computation of Ethernet device.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param rss_conf
+ *   The new configuration to use for RSS hash computation on the port.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENODEV) if port identifier is invalid.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_eth_dev_rss_hash_update(uint8_t port_id,
+				struct rte_eth_rss_conf *rss_conf);
+
+ /**
+ * Retrieve current configuration of Receive Side Scaling hash computation
+ * of Ethernet device.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param rss_conf
+ *   Where to store the current RSS hash configuration of the Ethernet device.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENODEV) if port identifier is invalid.
+ *   - (-ENOTSUP) if hardware doesn't support RSS.
+ */
+int
+rte_eth_dev_rss_hash_conf_get(uint8_t port_id,
+			      struct rte_eth_rss_conf *rss_conf);
+
+ /**
+ * Add UDP tunneling port for a specific type of tunnel.
+ * The packets with this UDP port will be identified as this type of tunnel.
+ * Before enabling any offloading function for a tunnel, users can call this API
+ * to change or add more UDP port for the tunnel. So the offloading function
+ * can take effect on the packets with the sepcific UDP port.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param tunnel_udp
+ *   UDP tunneling configuration.
+ *
+ * @return
+ *   - (0) if successful.
+ *   - (-ENODEV) if port identifier is invalid.
+ *   - (-ENOTSUP) if hardware doesn't support tunnel type.
+ */
+int
+rte_eth_dev_udp_tunnel_port_add(uint8_t port_id,
+				struct rte_eth_udp_tunnel *tunnel_udp);
+
+ /**
+ * Delete UDP tunneling port a specific type of tunnel.
+ * The packets with this UDP port will not be identified as this type of tunnel
+ * any more.
+ * Before enabling any offloading function for a tunnel, users can call this API
+ * to delete a UDP port for the tunnel. So the offloading function will not take
+ * effect on the packets with the sepcific UDP port.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param tunnel_udp
+ *   UDP tunneling configuration.
+ *
+ * @return
+ *   - (0) if successful.
+ *   - (-ENODEV) if port identifier is invalid.
+ *   - (-ENOTSUP) if hardware doesn't support tunnel type.
+ */
+int
+rte_eth_dev_udp_tunnel_port_delete(uint8_t port_id,
+				   struct rte_eth_udp_tunnel *tunnel_udp);
+
+/**
+ * Check whether the filter type is supported on an Ethernet device.
+ * All the supported filter types are defined in 'rte_eth_ctrl.h'.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param filter_type
+ *   Filter type.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support this filter type.
+ *   - (-ENODEV) if *port_id* invalid.
+ */
+int rte_eth_dev_filter_supported(uint8_t port_id, enum rte_filter_type filter_type);
+
+/**
+ * Take operations to assigned filter type on an Ethernet device.
+ * All the supported operations and filter types are defined in 'rte_eth_ctrl.h'.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param filter_type
+ *   Filter type.
+ * @param filter_op
+ *   Type of operation.
+ * @param arg
+ *   A pointer to arguments defined specifically for the operation.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-ENODEV) if *port_id* invalid.
+ *   - others depends on the specific operations implementation.
+ */
+int rte_eth_dev_filter_ctrl(uint8_t port_id, enum rte_filter_type filter_type,
+			enum rte_filter_op filter_op, void *arg);
+
+/**
+ * Get DCB information on an Ethernet device.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param dcb_info
+ *   dcb information.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENODEV) if port identifier is invalid.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ */
+int rte_eth_dev_get_dcb_info(uint8_t port_id,
+			     struct rte_eth_dcb_info *dcb_info);
+
+/**
+ * Add a callback to be called on packet RX on a given port and queue.
+ *
+ * This API configures a function to be called for each burst of
+ * packets received on a given NIC port queue. The return value is a pointer
+ * that can be used to later remove the callback using
+ * rte_eth_remove_rx_callback().
+ *
+ * Multiple functions are called in the order that they are added.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param queue_id
+ *   The queue on the Ethernet device on which the callback is to be added.
+ * @param fn
+ *   The callback function
+ * @param user_param
+ *   A generic pointer parameter which will be passed to each invocation of the
+ *   callback function on this port and queue.
+ *
+ * @return
+ *   NULL on error.
+ *   On success, a pointer value which can later be used to remove the callback.
+ */
+void *rte_eth_add_rx_callback(uint8_t port_id, uint16_t queue_id,
+		rte_rx_callback_fn fn, void *user_param);
+
+/**
+ * Add a callback to be called on packet TX on a given port and queue.
+ *
+ * This API configures a function to be called for each burst of
+ * packets sent on a given NIC port queue. The return value is a pointer
+ * that can be used to later remove the callback using
+ * rte_eth_remove_tx_callback().
+ *
+ * Multiple functions are called in the order that they are added.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param queue_id
+ *   The queue on the Ethernet device on which the callback is to be added.
+ * @param fn
+ *   The callback function
+ * @param user_param
+ *   A generic pointer parameter which will be passed to each invocation of the
+ *   callback function on this port and queue.
+ *
+ * @return
+ *   NULL on error.
+ *   On success, a pointer value which can later be used to remove the callback.
+ */
+void *rte_eth_add_tx_callback(uint8_t port_id, uint16_t queue_id,
+		rte_tx_callback_fn fn, void *user_param);
+
+/**
+ * Remove an RX packet callback from a given port and queue.
+ *
+ * This function is used to removed callbacks that were added to a NIC port
+ * queue using rte_eth_add_rx_callback().
+ *
+ * Note: the callback is removed from the callback list but it isn't freed
+ * since the it may still be in use. The memory for the callback can be
+ * subsequently freed back by the application by calling rte_free():
+ *
+ * - Immediately - if the port is stopped, or the user knows that no
+ *   callbacks are in flight e.g. if called from the thread doing RX/TX
+ *   on that queue.
+ *
+ * - After a short delay - where the delay is sufficient to allow any
+ *   in-flight callbacks to complete.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param queue_id
+ *   The queue on the Ethernet device from which the callback is to be removed.
+ * @param user_cb
+ *   User supplied callback created via rte_eth_add_rx_callback().
+ *
+ * @return
+ *   - 0: Success. Callback was removed.
+ *   - -ENOTSUP: Callback support is not available.
+ *   - -EINVAL:  The port_id or the queue_id is out of range, or the callback
+ *               is NULL or not found for the port/queue.
+ */
+int rte_eth_remove_rx_callback(uint8_t port_id, uint16_t queue_id,
+		struct rte_eth_rxtx_callback *user_cb);
+
+/**
+ * Remove a TX packet callback from a given port and queue.
+ *
+ * This function is used to removed callbacks that were added to a NIC port
+ * queue using rte_eth_add_tx_callback().
+ *
+ * Note: the callback is removed from the callback list but it isn't freed
+ * since the it may still be in use. The memory for the callback can be
+ * subsequently freed back by the application by calling rte_free():
+ *
+ * - Immediately - if the port is stopped, or the user knows that no
+ *   callbacks are in flight e.g. if called from the thread doing RX/TX
+ *   on that queue.
+ *
+ * - After a short delay - where the delay is sufficient to allow any
+ *   in-flight callbacks to complete.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param queue_id
+ *   The queue on the Ethernet device from which the callback is to be removed.
+ * @param user_cb
+ *   User supplied callback created via rte_eth_add_tx_callback().
+ *
+ * @return
+ *   - 0: Success. Callback was removed.
+ *   - -ENOTSUP: Callback support is not available.
+ *   - -EINVAL:  The port_id or the queue_id is out of range, or the callback
+ *               is NULL or not found for the port/queue.
+ */
+int rte_eth_remove_tx_callback(uint8_t port_id, uint16_t queue_id,
+		struct rte_eth_rxtx_callback *user_cb);
+
+/**
+ * Retrieve information about given port's RX queue.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param queue_id
+ *   The RX queue on the Ethernet device for which information
+ *   will be retrieved.
+ * @param qinfo
+ *   A pointer to a structure of type *rte_eth_rxq_info_info* to be filled with
+ *   the information of the Ethernet device.
+ *
+ * @return
+ *   - 0: Success
+ *   - -ENOTSUP: routine is not supported by the device PMD.
+ *   - -EINVAL:  The port_id or the queue_id is out of range.
+ */
+int rte_eth_rx_queue_info_get(uint8_t port_id, uint16_t queue_id,
+	struct rte_eth_rxq_info *qinfo);
+
+/**
+ * Retrieve information about given port's TX queue.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param queue_id
+ *   The TX queue on the Ethernet device for which information
+ *   will be retrieved.
+ * @param qinfo
+ *   A pointer to a structure of type *rte_eth_txq_info_info* to be filled with
+ *   the information of the Ethernet device.
+ *
+ * @return
+ *   - 0: Success
+ *   - -ENOTSUP: routine is not supported by the device PMD.
+ *   - -EINVAL:  The port_id or the queue_id is out of range.
+ */
+int rte_eth_tx_queue_info_get(uint8_t port_id, uint16_t queue_id,
+	struct rte_eth_txq_info *qinfo);
+
+/*
+ * Retrieve number of available registers for access
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @return
+ *   - (>=0) number of registers if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-ENODEV) if *port_id* invalid.
+ *   - others depends on the specific operations implementation.
+ */
+int rte_eth_dev_get_reg_length(uint8_t port_id);
+
+/**
+ * Retrieve device registers and register attributes
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param info
+ *   The template includes buffer for register data and attribute to be filled.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-ENODEV) if *port_id* invalid.
+ *   - others depends on the specific operations implementation.
+ */
+int rte_eth_dev_get_reg_info(uint8_t port_id, struct rte_dev_reg_info *info);
+
+/**
+ * Retrieve size of device EEPROM
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @return
+ *   - (>=0) EEPROM size if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-ENODEV) if *port_id* invalid.
+ *   - others depends on the specific operations implementation.
+ */
+int rte_eth_dev_get_eeprom_length(uint8_t port_id);
+
+/**
+ * Retrieve EEPROM and EEPROM attribute
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param info
+ *   The template includes buffer for return EEPROM data and
+ *   EEPROM attributes to be filled.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-ENODEV) if *port_id* invalid.
+ *   - others depends on the specific operations implementation.
+ */
+int rte_eth_dev_get_eeprom(uint8_t port_id, struct rte_dev_eeprom_info *info);
+
+/**
+ * Program EEPROM with provided data
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param info
+ *   The template includes EEPROM data for programming and
+ *   EEPROM attributes to be filled
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-ENODEV) if *port_id* invalid.
+ *   - others depends on the specific operations implementation.
+ */
+int rte_eth_dev_set_eeprom(uint8_t port_id, struct rte_dev_eeprom_info *info);
+
+/**
+ * Set the list of multicast addresses to filter on an Ethernet device.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param mc_addr_set
+ *   The array of multicast addresses to set. Equal to NULL when the function
+ *   is invoked to flush the set of filtered addresses.
+ * @param nb_mc_addr
+ *   The number of multicast addresses in the *mc_addr_set* array. Equal to 0
+ *   when the function is invoked to flush the set of filtered addresses.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENODEV) if *port_id* invalid.
+ *   - (-ENOTSUP) if PMD of *port_id* doesn't support multicast filtering.
+ *   - (-ENOSPC) if *port_id* has not enough multicast filtering resources.
+ */
+int rte_eth_dev_set_mc_addr_list(uint8_t port_id,
+				 struct ether_addr *mc_addr_set,
+				 uint32_t nb_mc_addr);
+
+/**
+ * Enable IEEE1588/802.1AS timestamping for an Ethernet device.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ *
+ * @return
+ *   - 0: Success.
+ *   - -ENODEV: The port ID is invalid.
+ *   - -ENOTSUP: The function is not supported by the Ethernet driver.
+ */
+int rte_eth_timesync_enable(uint8_t port_id);
+
+/**
+ * Disable IEEE1588/802.1AS timestamping for an Ethernet device.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ *
+ * @return
+ *   - 0: Success.
+ *   - -ENODEV: The port ID is invalid.
+ *   - -ENOTSUP: The function is not supported by the Ethernet driver.
+ */
+int rte_eth_timesync_disable(uint8_t port_id);
+
+/**
+ * Read an IEEE1588/802.1AS RX timestamp from an Ethernet device.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param timestamp
+ *   Pointer to the timestamp struct.
+ * @param flags
+ *   Device specific flags. Used to pass the RX timesync register index to
+ *   i40e. Unused in igb/ixgbe, pass 0 instead.
+ *
+ * @return
+ *   - 0: Success.
+ *   - -EINVAL: No timestamp is available.
+ *   - -ENODEV: The port ID is invalid.
+ *   - -ENOTSUP: The function is not supported by the Ethernet driver.
+ */
+int rte_eth_timesync_read_rx_timestamp(uint8_t port_id,
+		struct timespec *timestamp, uint32_t flags);
+
+/**
+ * Read an IEEE1588/802.1AS TX timestamp from an Ethernet device.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param timestamp
+ *   Pointer to the timestamp struct.
+ *
+ * @return
+ *   - 0: Success.
+ *   - -EINVAL: No timestamp is available.
+ *   - -ENODEV: The port ID is invalid.
+ *   - -ENOTSUP: The function is not supported by the Ethernet driver.
+ */
+int rte_eth_timesync_read_tx_timestamp(uint8_t port_id,
+		struct timespec *timestamp);
+
+/**
+ * Adjust the timesync clock on an Ethernet device.
+ *
+ * This is usually used in conjunction with other Ethdev timesync functions to
+ * synchronize the device time using the IEEE1588/802.1AS protocol.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param delta
+ *   The adjustment in nanoseconds.
+ *
+ * @return
+ *   - 0: Success.
+ *   - -ENODEV: The port ID is invalid.
+ *   - -ENOTSUP: The function is not supported by the Ethernet driver.
+ */
+int rte_eth_timesync_adjust_time(uint8_t port_id, int64_t delta);
+
+/**
+ * Read the time from the timesync clock on an Ethernet device.
+ *
+ * This is usually used in conjunction with other Ethdev timesync functions to
+ * synchronize the device time using the IEEE1588/802.1AS protocol.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param time
+ *   Pointer to the timespec struct that holds the time.
+ *
+ * @return
+ *   - 0: Success.
+ */
+int rte_eth_timesync_read_time(uint8_t port_id, struct timespec *time);
+
+/**
+ * Set the time of the timesync clock on an Ethernet device.
+ *
+ * This is usually used in conjunction with other Ethdev timesync functions to
+ * synchronize the device time using the IEEE1588/802.1AS protocol.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param time
+ *   Pointer to the timespec struct that holds the time.
+ *
+ * @return
+ *   - 0: Success.
+ *   - -EINVAL: No timestamp is available.
+ *   - -ENODEV: The port ID is invalid.
+ *   - -ENOTSUP: The function is not supported by the Ethernet driver.
+ */
+int rte_eth_timesync_write_time(uint8_t port_id, const struct timespec *time);
+
+/**
+ * Copy pci device info to the Ethernet device data.
+ *
+ * @param eth_dev
+ * The *eth_dev* pointer is the address of the *rte_eth_dev* structure.
+ * @param pci_dev
+ * The *pci_dev* pointer is the address of the *rte_pci_device* structure.
+ *
+ * @return
+ *   - 0 on success, negative on error
+ */
+void rte_eth_copy_pci_info(struct rte_eth_dev *eth_dev,
+		struct rte_pci_device *pci_dev);
+
+/**
+ * Create memzone for HW rings.
+ * malloc can't be used as the physical address is needed.
+ * If the memzone is already created, then this function returns a ptr
+ * to the old one.
+ *
+ * @param eth_dev
+ *   The *eth_dev* pointer is the address of the *rte_eth_dev* structure
+ * @param name
+ *   The name of the memory zone
+ * @param queue_id
+ *   The index of the queue to add to name
+ * @param size
+ *   The sizeof of the memory area
+ * @param align
+ *   Alignment for resulting memzone. Must be a power of 2.
+ * @param socket_id
+ *   The *socket_id* argument is the socket identifier in case of NUMA.
+ */
+const struct rte_memzone *
+rte_eth_dma_zone_reserve(const struct rte_eth_dev *eth_dev, const char *name,
+			 uint16_t queue_id, size_t size,
+			 unsigned align, int socket_id);
+
+/**
+ * Config l2 tunnel ether type of an Ethernet device for filtering specific
+ * tunnel packets by ether type.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param l2_tunnel
+ *   l2 tunnel configuration.
+ *
+ * @return
+ *   - (0) if successful.
+ *   - (-ENODEV) if port identifier is invalid.
+ *   - (-ENOTSUP) if hardware doesn't support tunnel type.
+ */
+int
+rte_eth_dev_l2_tunnel_eth_type_conf(uint8_t port_id,
+				    struct rte_eth_l2_tunnel_conf *l2_tunnel);
+
+/**
+ * Enable/disable l2 tunnel offload functions. Include,
+ * 1, The ability of parsing a type of l2 tunnel of an Ethernet device.
+ *    Filtering, forwarding and offloading this type of tunnel packets depend on
+ *    this ability.
+ * 2, Stripping the l2 tunnel tag.
+ * 3, Insertion of the l2 tunnel tag.
+ * 4, Forwarding the packets based on the l2 tunnel tag.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param l2_tunnel
+ *   l2 tunnel parameters.
+ * @param mask
+ *   Indicate the offload function.
+ * @param en
+ *   Enable or disable this function.
+ *
+ * @return
+ *   - (0) if successful.
+ *   - (-ENODEV) if port identifier is invalid.
+ *   - (-ENOTSUP) if hardware doesn't support tunnel type.
+ */
+int
+rte_eth_dev_l2_tunnel_offload_set(uint8_t port_id,
+				  struct rte_eth_l2_tunnel_conf *l2_tunnel,
+				  uint32_t mask,
+				  uint8_t en);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_ETHDEV_H_ */
diff --git a/lib/librte_ether/rte_ether.h b/lib/librte_ether/rte_ether.h
new file mode 100644
index 00000000..1d62d8e5
--- /dev/null
+++ b/lib/librte_ether/rte_ether.h
@@ -0,0 +1,416 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_ETHER_H_
+#define _RTE_ETHER_H_
+
+/**
+ * @file
+ *
+ * Ethernet Helpers in RTE
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+#include <stdio.h>
+
+#include <rte_memcpy.h>
+#include <rte_random.h>
+#include <rte_mbuf.h>
+#include <rte_byteorder.h>
+
+#define ETHER_ADDR_LEN  6 /**< Length of Ethernet address. */
+#define ETHER_TYPE_LEN  2 /**< Length of Ethernet type field. */
+#define ETHER_CRC_LEN   4 /**< Length of Ethernet CRC. */
+#define ETHER_HDR_LEN   \
+	(ETHER_ADDR_LEN * 2 + ETHER_TYPE_LEN) /**< Length of Ethernet header. */
+#define ETHER_MIN_LEN   64    /**< Minimum frame len, including CRC. */
+#define ETHER_MAX_LEN   1518  /**< Maximum frame len, including CRC. */
+#define ETHER_MTU       \
+	(ETHER_MAX_LEN - ETHER_HDR_LEN - ETHER_CRC_LEN) /**< Ethernet MTU. */
+
+#define ETHER_MAX_VLAN_FRAME_LEN \
+	(ETHER_MAX_LEN + 4) /**< Maximum VLAN frame length, including CRC. */
+
+#define ETHER_MAX_JUMBO_FRAME_LEN \
+	0x3F00 /**< Maximum Jumbo frame length, including CRC. */
+
+#define ETHER_MAX_VLAN_ID  4095 /**< Maximum VLAN ID. */
+
+#define ETHER_MIN_MTU 68 /**< Minimum MTU for IPv4 packets, see RFC 791. */
+
+/**
+ * Ethernet address:
+ * A universally administered address is uniquely assigned to a device by its
+ * manufacturer. The first three octets (in transmission order) contain the
+ * Organizationally Unique Identifier (OUI). The following three (MAC-48 and
+ * EUI-48) octets are assigned by that organization with the only constraint
+ * of uniqueness.
+ * A locally administered address is assigned to a device by a network
+ * administrator and does not contain OUIs.
+ * See http://standards.ieee.org/regauth/groupmac/tutorial.html
+ */
+struct ether_addr {
+	uint8_t addr_bytes[ETHER_ADDR_LEN]; /**< Address bytes in transmission order */
+} __attribute__((__packed__));
+
+#define ETHER_LOCAL_ADMIN_ADDR 0x02 /**< Locally assigned Eth. address. */
+#define ETHER_GROUP_ADDR       0x01 /**< Multicast or broadcast Eth. address. */
+
+/**
+ * Check if two Ethernet addresses are the same.
+ *
+ * @param ea1
+ *  A pointer to the first ether_addr structure containing
+ *  the ethernet address.
+ * @param ea2
+ *  A pointer to the second ether_addr structure containing
+ *  the ethernet address.
+ *
+ * @return
+ *  True  (1) if the given two ethernet address are the same;
+ *  False (0) otherwise.
+ */
+static inline int is_same_ether_addr(const struct ether_addr *ea1,
+				     const struct ether_addr *ea2)
+{
+	int i;
+	for (i = 0; i < ETHER_ADDR_LEN; i++)
+		if (ea1->addr_bytes[i] != ea2->addr_bytes[i])
+			return 0;
+	return 1;
+}
+
+/**
+ * Check if an Ethernet address is filled with zeros.
+ *
+ * @param ea
+ *   A pointer to a ether_addr structure containing the ethernet address
+ *   to check.
+ * @return
+ *   True  (1) if the given ethernet address is filled with zeros;
+ *   false (0) otherwise.
+ */
+static inline int is_zero_ether_addr(const struct ether_addr *ea)
+{
+	int i;
+	for (i = 0; i < ETHER_ADDR_LEN; i++)
+		if (ea->addr_bytes[i] != 0x00)
+			return 0;
+	return 1;
+}
+
+/**
+ * Check if an Ethernet address is a unicast address.
+ *
+ * @param ea
+ *   A pointer to a ether_addr structure containing the ethernet address
+ *   to check.
+ * @return
+ *   True  (1) if the given ethernet address is a unicast address;
+ *   false (0) otherwise.
+ */
+static inline int is_unicast_ether_addr(const struct ether_addr *ea)
+{
+	return (ea->addr_bytes[0] & ETHER_GROUP_ADDR) == 0;
+}
+
+/**
+ * Check if an Ethernet address is a multicast address.
+ *
+ * @param ea
+ *   A pointer to a ether_addr structure containing the ethernet address
+ *   to check.
+ * @return
+ *   True  (1) if the given ethernet address is a multicast address;
+ *   false (0) otherwise.
+ */
+static inline int is_multicast_ether_addr(const struct ether_addr *ea)
+{
+	return ea->addr_bytes[0] & ETHER_GROUP_ADDR;
+}
+
+/**
+ * Check if an Ethernet address is a broadcast address.
+ *
+ * @param ea
+ *   A pointer to a ether_addr structure containing the ethernet address
+ *   to check.
+ * @return
+ *   True  (1) if the given ethernet address is a broadcast address;
+ *   false (0) otherwise.
+ */
+static inline int is_broadcast_ether_addr(const struct ether_addr *ea)
+{
+	const unaligned_uint16_t *ea_words = (const unaligned_uint16_t *)ea;
+
+	return (ea_words[0] == 0xFFFF && ea_words[1] == 0xFFFF &&
+		ea_words[2] == 0xFFFF);
+}
+
+/**
+ * Check if an Ethernet address is a universally assigned address.
+ *
+ * @param ea
+ *   A pointer to a ether_addr structure containing the ethernet address
+ *   to check.
+ * @return
+ *   True  (1) if the given ethernet address is a universally assigned address;
+ *   false (0) otherwise.
+ */
+static inline int is_universal_ether_addr(const struct ether_addr *ea)
+{
+	return (ea->addr_bytes[0] & ETHER_LOCAL_ADMIN_ADDR) == 0;
+}
+
+/**
+ * Check if an Ethernet address is a locally assigned address.
+ *
+ * @param ea
+ *   A pointer to a ether_addr structure containing the ethernet address
+ *   to check.
+ * @return
+ *   True  (1) if the given ethernet address is a locally assigned address;
+ *   false (0) otherwise.
+ */
+static inline int is_local_admin_ether_addr(const struct ether_addr *ea)
+{
+	return (ea->addr_bytes[0] & ETHER_LOCAL_ADMIN_ADDR) != 0;
+}
+
+/**
+ * Check if an Ethernet address is a valid address. Checks that the address is a
+ * unicast address and is not filled with zeros.
+ *
+ * @param ea
+ *   A pointer to a ether_addr structure containing the ethernet address
+ *   to check.
+ * @return
+ *   True  (1) if the given ethernet address is valid;
+ *   false (0) otherwise.
+ */
+static inline int is_valid_assigned_ether_addr(const struct ether_addr *ea)
+{
+	return is_unicast_ether_addr(ea) && (! is_zero_ether_addr(ea));
+}
+
+/**
+ * Generate a random Ethernet address that is locally administered
+ * and not multicast.
+ * @param addr
+ *   A pointer to Ethernet address.
+ */
+static inline void eth_random_addr(uint8_t *addr)
+{
+	uint64_t rand = rte_rand();
+	uint8_t *p = (uint8_t*)&rand;
+
+	rte_memcpy(addr, p, ETHER_ADDR_LEN);
+	addr[0] &= ~ETHER_GROUP_ADDR;       /* clear multicast bit */
+	addr[0] |= ETHER_LOCAL_ADMIN_ADDR;  /* set local assignment bit */
+}
+
+/**
+ * Fast copy an Ethernet address.
+ *
+ * @param ea_from
+ *   A pointer to a ether_addr structure holding the Ethernet address to copy.
+ * @param ea_to
+ *   A pointer to a ether_addr structure where to copy the Ethernet address.
+ */
+static inline void ether_addr_copy(const struct ether_addr *ea_from,
+				   struct ether_addr *ea_to)
+{
+#ifdef __INTEL_COMPILER
+	uint16_t *from_words = (uint16_t *)(ea_from->addr_bytes);
+	uint16_t *to_words   = (uint16_t *)(ea_to->addr_bytes);
+
+	to_words[0] = from_words[0];
+	to_words[1] = from_words[1];
+	to_words[2] = from_words[2];
+#else
+	/*
+	 * Use the common way, because of a strange gcc warning.
+	 */
+	*ea_to = *ea_from;
+#endif
+}
+
+#define ETHER_ADDR_FMT_SIZE         18
+/**
+ * Format 48bits Ethernet address in pattern xx:xx:xx:xx:xx:xx.
+ *
+ * @param buf
+ *   A pointer to buffer contains the formatted MAC address.
+ * @param size
+ *   The format buffer size.
+ * @param eth_addr
+ *   A pointer to a ether_addr structure.
+ */
+static inline void
+ether_format_addr(char *buf, uint16_t size,
+		  const struct ether_addr *eth_addr)
+{
+	snprintf(buf, size, "%02X:%02X:%02X:%02X:%02X:%02X",
+		 eth_addr->addr_bytes[0],
+		 eth_addr->addr_bytes[1],
+		 eth_addr->addr_bytes[2],
+		 eth_addr->addr_bytes[3],
+		 eth_addr->addr_bytes[4],
+		 eth_addr->addr_bytes[5]);
+}
+
+/**
+ * Ethernet header: Contains the destination address, source address
+ * and frame type.
+ */
+struct ether_hdr {
+	struct ether_addr d_addr; /**< Destination address. */
+	struct ether_addr s_addr; /**< Source address. */
+	uint16_t ether_type;      /**< Frame type. */
+} __attribute__((__packed__));
+
+/**
+ * Ethernet VLAN Header.
+ * Contains the 16-bit VLAN Tag Control Identifier and the Ethernet type
+ * of the encapsulated frame.
+ */
+struct vlan_hdr {
+	uint16_t vlan_tci; /**< Priority (3) + CFI (1) + Identifier Code (12) */
+	uint16_t eth_proto;/**< Ethernet type of encapsulated frame. */
+} __attribute__((__packed__));
+
+/**
+ * VXLAN protocol header.
+ * Contains the 8-bit flag, 24-bit VXLAN Network Identifier and
+ * Reserved fields (24 bits and 8 bits)
+ */
+struct vxlan_hdr {
+	uint32_t vx_flags; /**< flag (8) + Reserved (24). */
+	uint32_t vx_vni;   /**< VNI (24) + Reserved (8). */
+} __attribute__((__packed__));
+
+/* Ethernet frame types */
+#define ETHER_TYPE_IPv4 0x0800 /**< IPv4 Protocol. */
+#define ETHER_TYPE_IPv6 0x86DD /**< IPv6 Protocol. */
+#define ETHER_TYPE_ARP  0x0806 /**< Arp Protocol. */
+#define ETHER_TYPE_RARP 0x8035 /**< Reverse Arp Protocol. */
+#define ETHER_TYPE_VLAN 0x8100 /**< IEEE 802.1Q VLAN tagging. */
+#define ETHER_TYPE_1588 0x88F7 /**< IEEE 802.1AS 1588 Precise Time Protocol. */
+#define ETHER_TYPE_SLOW 0x8809 /**< Slow protocols (LACP and Marker). */
+#define ETHER_TYPE_TEB  0x6558 /**< Transparent Ethernet Bridging. */
+
+#define ETHER_VXLAN_HLEN (sizeof(struct udp_hdr) + sizeof(struct vxlan_hdr))
+/**< VXLAN tunnel header length. */
+
+/**
+ * Extract VLAN tag information into mbuf
+ *
+ * Software version of VLAN stripping
+ *
+ * @param m
+ *   The packet mbuf.
+ * @return
+ *   - 0: Success
+ *   - 1: not a vlan packet
+ */
+static inline int rte_vlan_strip(struct rte_mbuf *m)
+{
+	struct ether_hdr *eh
+		 = rte_pktmbuf_mtod(m, struct ether_hdr *);
+
+	if (eh->ether_type != rte_cpu_to_be_16(ETHER_TYPE_VLAN))
+		return -1;
+
+	struct vlan_hdr *vh = (struct vlan_hdr *)(eh + 1);
+	m->ol_flags |= PKT_RX_VLAN_PKT;
+	m->vlan_tci = rte_be_to_cpu_16(vh->vlan_tci);
+
+	/* Copy ether header over rather than moving whole packet */
+	memmove(rte_pktmbuf_adj(m, sizeof(struct vlan_hdr)),
+		eh, 2 * ETHER_ADDR_LEN);
+
+	return 0;
+}
+
+/**
+ * Insert VLAN tag into mbuf.
+ *
+ * Software version of VLAN unstripping
+ *
+ * @param m
+ *   The packet mbuf.
+ * @return
+ *   - 0: On success
+ *   -EPERM: mbuf is is shared overwriting would be unsafe
+ *   -ENOSPC: not enough headroom in mbuf
+ */
+static inline int rte_vlan_insert(struct rte_mbuf **m)
+{
+	struct ether_hdr *oh, *nh;
+	struct vlan_hdr *vh;
+
+	/* Can't insert header if mbuf is shared */
+	if (rte_mbuf_refcnt_read(*m) > 1) {
+		struct rte_mbuf *copy;
+
+		copy = rte_pktmbuf_clone(*m, (*m)->pool);
+		if (unlikely(copy == NULL))
+			return -ENOMEM;
+		rte_pktmbuf_free(*m);
+		*m = copy;
+	}
+
+	oh = rte_pktmbuf_mtod(*m, struct ether_hdr *);
+	nh = (struct ether_hdr *)
+		rte_pktmbuf_prepend(*m, sizeof(struct vlan_hdr));
+	if (nh == NULL)
+		return -ENOSPC;
+
+	memmove(nh, oh, 2 * ETHER_ADDR_LEN);
+	nh->ether_type = rte_cpu_to_be_16(ETHER_TYPE_VLAN);
+
+	vh = (struct vlan_hdr *) (nh + 1);
+	vh->vlan_tci = rte_cpu_to_be_16((*m)->vlan_tci);
+
+	return 0;
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_ETHER_H_ */
diff --git a/lib/librte_ether/rte_ether_version.map b/lib/librte_ether/rte_ether_version.map
new file mode 100644
index 00000000..214ecc73
--- /dev/null
+++ b/lib/librte_ether/rte_ether_version.map
@@ -0,0 +1,134 @@
+DPDK_2.2 {
+	global:
+
+	_rte_eth_dev_callback_process;
+	rte_eth_add_rx_callback;
+	rte_eth_add_tx_callback;
+	rte_eth_allmulticast_disable;
+	rte_eth_allmulticast_enable;
+	rte_eth_allmulticast_get;
+	rte_eth_copy_pci_info;
+	rte_eth_dev_allocate;
+	rte_eth_dev_allocated;
+	rte_eth_dev_attach;
+	rte_eth_dev_bypass_event_show;
+	rte_eth_dev_bypass_event_store;
+	rte_eth_dev_bypass_init;
+	rte_eth_dev_bypass_state_set;
+	rte_eth_dev_bypass_state_show;
+	rte_eth_dev_bypass_ver_show;
+	rte_eth_dev_bypass_wd_reset;
+	rte_eth_dev_bypass_wd_timeout_show;
+	rte_eth_dev_callback_process;
+	rte_eth_dev_callback_register;
+	rte_eth_dev_callback_unregister;
+	rte_eth_dev_close;
+	rte_eth_dev_configure;
+	rte_eth_dev_count;
+	rte_eth_dev_default_mac_addr_set;
+	rte_eth_dev_detach;
+	rte_eth_dev_filter_ctrl;
+	rte_eth_dev_filter_supported;
+	rte_eth_dev_flow_ctrl_get;
+	rte_eth_dev_flow_ctrl_set;
+	rte_eth_dev_get_dcb_info;
+	rte_eth_dev_get_eeprom;
+	rte_eth_dev_get_eeprom_length;
+	rte_eth_dev_get_mtu;
+	rte_eth_dev_get_reg_info;
+	rte_eth_dev_get_reg_length;
+	rte_eth_dev_get_vlan_offload;
+	rte_eth_devices;
+	rte_eth_dev_info_get;
+	rte_eth_dev_is_valid_port;
+	rte_eth_dev_mac_addr_add;
+	rte_eth_dev_mac_addr_remove;
+	rte_eth_dev_priority_flow_ctrl_set;
+	rte_eth_dev_release_port;
+	rte_eth_dev_rss_hash_conf_get;
+	rte_eth_dev_rss_hash_update;
+	rte_eth_dev_rss_reta_query;
+	rte_eth_dev_rss_reta_update;
+	rte_eth_dev_rx_intr_ctl;
+	rte_eth_dev_rx_intr_ctl_q;
+	rte_eth_dev_rx_intr_disable;
+	rte_eth_dev_rx_intr_enable;
+	rte_eth_dev_rx_queue_start;
+	rte_eth_dev_rx_queue_stop;
+	rte_eth_dev_set_eeprom;
+	rte_eth_dev_set_link_down;
+	rte_eth_dev_set_link_up;
+	rte_eth_dev_set_mc_addr_list;
+	rte_eth_dev_set_mtu;
+	rte_eth_dev_set_rx_queue_stats_mapping;
+	rte_eth_dev_set_tx_queue_stats_mapping;
+	rte_eth_dev_set_vf_rx;
+	rte_eth_dev_set_vf_rxmode;
+	rte_eth_dev_set_vf_tx;
+	rte_eth_dev_set_vf_vlan_filter;
+	rte_eth_dev_set_vlan_ether_type;
+	rte_eth_dev_set_vlan_offload;
+	rte_eth_dev_set_vlan_pvid;
+	rte_eth_dev_set_vlan_strip_on_queue;
+	rte_eth_dev_socket_id;
+	rte_eth_dev_start;
+	rte_eth_dev_stop;
+	rte_eth_dev_tx_queue_start;
+	rte_eth_dev_tx_queue_stop;
+	rte_eth_dev_uc_all_hash_table_set;
+	rte_eth_dev_uc_hash_table_set;
+	rte_eth_dev_vlan_filter;
+	rte_eth_dev_wd_timeout_store;
+	rte_eth_dma_zone_reserve;
+	rte_eth_driver_register;
+	rte_eth_led_off;
+	rte_eth_led_on;
+	rte_eth_link;
+	rte_eth_link_get;
+	rte_eth_link_get_nowait;
+	rte_eth_macaddr_get;
+	rte_eth_mirror_rule_reset;
+	rte_eth_mirror_rule_set;
+	rte_eth_promiscuous_disable;
+	rte_eth_promiscuous_enable;
+	rte_eth_promiscuous_get;
+	rte_eth_remove_rx_callback;
+	rte_eth_remove_tx_callback;
+	rte_eth_rx_queue_info_get;
+	rte_eth_rx_queue_setup;
+	rte_eth_set_queue_rate_limit;
+	rte_eth_set_vf_rate_limit;
+	rte_eth_stats;
+	rte_eth_stats_get;
+	rte_eth_stats_reset;
+	rte_eth_timesync_adjust_time;
+	rte_eth_timesync_disable;
+	rte_eth_timesync_enable;
+	rte_eth_timesync_read_rx_timestamp;
+	rte_eth_timesync_read_time;
+	rte_eth_timesync_read_tx_timestamp;
+	rte_eth_timesync_write_time;
+	rte_eth_tx_queue_info_get;
+	rte_eth_tx_queue_setup;
+	rte_eth_xstats_get;
+	rte_eth_xstats_reset;
+
+	local: *;
+};
+
+DPDK_16.04 {
+	global:
+
+	rte_eth_dev_get_supported_ptypes;
+	rte_eth_dev_l2_tunnel_eth_type_conf;
+	rte_eth_dev_l2_tunnel_offload_set;
+	rte_eth_dev_set_vlan_ether_type;
+	rte_eth_dev_udp_tunnel_port_add;
+	rte_eth_dev_udp_tunnel_port_delete;
+	rte_eth_speed_bitflag;
+	rte_eth_tx_buffer_count_callback;
+	rte_eth_tx_buffer_drop_callback;
+	rte_eth_tx_buffer_init;
+	rte_eth_tx_buffer_set_err_callback;
+
+} DPDK_2.2;