aboutsummaryrefslogtreecommitdiffstats
path: root/lib/librte_mbuf
diff options
context:
space:
mode:
authorC.J. Collier <cjcollier@linuxfoundation.org>2016-06-14 07:50:17 -0700
committerC.J. Collier <cjcollier@linuxfoundation.org>2016-06-14 12:17:54 -0700
commit97f17497d162afdb82c8704bf097f0fee3724b2e (patch)
tree1c6269614c0c15ffef8451c58ae8f8b30a1bc804 /lib/librte_mbuf
parente04be89c2409570e0055b2cda60bd11395bb93b0 (diff)
Imported Upstream version 16.04
Change-Id: I77eadcd8538a9122e4773cbe55b24033dc451757 Signed-off-by: C.J. Collier <cjcollier@linuxfoundation.org>
Diffstat (limited to 'lib/librte_mbuf')
-rw-r--r--lib/librte_mbuf/Makefile52
-rw-r--r--lib/librte_mbuf/rte_mbuf.c288
-rw-r--r--lib/librte_mbuf/rte_mbuf.h1946
-rw-r--r--lib/librte_mbuf/rte_mbuf_version.map20
4 files changed, 2306 insertions, 0 deletions
diff --git a/lib/librte_mbuf/Makefile b/lib/librte_mbuf/Makefile
new file mode 100644
index 00000000..8d62b0d3
--- /dev/null
+++ b/lib/librte_mbuf/Makefile
@@ -0,0 +1,52 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# library name
+LIB = librte_mbuf.a
+
+CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3
+
+EXPORT_MAP := rte_mbuf_version.map
+
+LIBABIVER := 2
+
+# all source are stored in SRCS-y
+SRCS-$(CONFIG_RTE_LIBRTE_MBUF) := rte_mbuf.c
+
+# install includes
+SYMLINK-$(CONFIG_RTE_LIBRTE_MBUF)-include := rte_mbuf.h
+
+# this lib needs eal
+DEPDIRS-$(CONFIG_RTE_LIBRTE_MBUF) += lib/librte_eal lib/librte_mempool
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/lib/librte_mbuf/rte_mbuf.c b/lib/librte_mbuf/rte_mbuf.c
new file mode 100644
index 00000000..dc0467c9
--- /dev/null
+++ b/lib/librte_mbuf/rte_mbuf.c
@@ -0,0 +1,288 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * Copyright 2014 6WIND S.A.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <string.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <stdarg.h>
+#include <inttypes.h>
+#include <errno.h>
+#include <ctype.h>
+#include <sys/queue.h>
+
+#include <rte_debug.h>
+#include <rte_common.h>
+#include <rte_log.h>
+#include <rte_memory.h>
+#include <rte_memzone.h>
+#include <rte_launch.h>
+#include <rte_eal.h>
+#include <rte_per_lcore.h>
+#include <rte_lcore.h>
+#include <rte_atomic.h>
+#include <rte_branch_prediction.h>
+#include <rte_ring.h>
+#include <rte_mempool.h>
+#include <rte_mbuf.h>
+#include <rte_string_fns.h>
+#include <rte_hexdump.h>
+#include <rte_errno.h>
+
+/*
+ * ctrlmbuf constructor, given as a callback function to
+ * rte_mempool_create()
+ */
+void
+rte_ctrlmbuf_init(struct rte_mempool *mp,
+ __attribute__((unused)) void *opaque_arg,
+ void *_m,
+ __attribute__((unused)) unsigned i)
+{
+ struct rte_mbuf *m = _m;
+ rte_pktmbuf_init(mp, opaque_arg, _m, i);
+ m->ol_flags |= CTRL_MBUF_FLAG;
+}
+
+/*
+ * pktmbuf pool constructor, given as a callback function to
+ * rte_mempool_create()
+ */
+void
+rte_pktmbuf_pool_init(struct rte_mempool *mp, void *opaque_arg)
+{
+ struct rte_pktmbuf_pool_private *user_mbp_priv, *mbp_priv;
+ struct rte_pktmbuf_pool_private default_mbp_priv;
+ uint16_t roomsz;
+
+ RTE_MBUF_ASSERT(mp->elt_size >= sizeof(struct rte_mbuf));
+
+ /* if no structure is provided, assume no mbuf private area */
+ user_mbp_priv = opaque_arg;
+ if (user_mbp_priv == NULL) {
+ default_mbp_priv.mbuf_priv_size = 0;
+ if (mp->elt_size > sizeof(struct rte_mbuf))
+ roomsz = mp->elt_size - sizeof(struct rte_mbuf);
+ else
+ roomsz = 0;
+ default_mbp_priv.mbuf_data_room_size = roomsz;
+ user_mbp_priv = &default_mbp_priv;
+ }
+
+ RTE_MBUF_ASSERT(mp->elt_size >= sizeof(struct rte_mbuf) +
+ user_mbp_priv->mbuf_data_room_size +
+ user_mbp_priv->mbuf_priv_size);
+
+ mbp_priv = rte_mempool_get_priv(mp);
+ memcpy(mbp_priv, user_mbp_priv, sizeof(*mbp_priv));
+}
+
+/*
+ * pktmbuf constructor, given as a callback function to
+ * rte_mempool_create().
+ * Set the fields of a packet mbuf to their default values.
+ */
+void
+rte_pktmbuf_init(struct rte_mempool *mp,
+ __attribute__((unused)) void *opaque_arg,
+ void *_m,
+ __attribute__((unused)) unsigned i)
+{
+ struct rte_mbuf *m = _m;
+ uint32_t mbuf_size, buf_len, priv_size;
+
+ priv_size = rte_pktmbuf_priv_size(mp);
+ mbuf_size = sizeof(struct rte_mbuf) + priv_size;
+ buf_len = rte_pktmbuf_data_room_size(mp);
+
+ RTE_MBUF_ASSERT(RTE_ALIGN(priv_size, RTE_MBUF_PRIV_ALIGN) == priv_size);
+ RTE_MBUF_ASSERT(mp->elt_size >= mbuf_size);
+ RTE_MBUF_ASSERT(buf_len <= UINT16_MAX);
+
+ memset(m, 0, mp->elt_size);
+
+ /* start of buffer is after mbuf structure and priv data */
+ m->priv_size = priv_size;
+ m->buf_addr = (char *)m + mbuf_size;
+ m->buf_physaddr = rte_mempool_virt2phy(mp, m) + mbuf_size;
+ m->buf_len = (uint16_t)buf_len;
+
+ /* keep some headroom between start of buffer and data */
+ m->data_off = RTE_MIN(RTE_PKTMBUF_HEADROOM, (uint16_t)m->buf_len);
+
+ /* init some constant fields */
+ m->pool = mp;
+ m->nb_segs = 1;
+ m->port = 0xff;
+}
+
+/* helper to create a mbuf pool */
+struct rte_mempool *
+rte_pktmbuf_pool_create(const char *name, unsigned n,
+ unsigned cache_size, uint16_t priv_size, uint16_t data_room_size,
+ int socket_id)
+{
+ struct rte_pktmbuf_pool_private mbp_priv;
+ unsigned elt_size;
+
+ if (RTE_ALIGN(priv_size, RTE_MBUF_PRIV_ALIGN) != priv_size) {
+ RTE_LOG(ERR, MBUF, "mbuf priv_size=%u is not aligned\n",
+ priv_size);
+ rte_errno = EINVAL;
+ return NULL;
+ }
+ elt_size = sizeof(struct rte_mbuf) + (unsigned)priv_size +
+ (unsigned)data_room_size;
+ mbp_priv.mbuf_data_room_size = data_room_size;
+ mbp_priv.mbuf_priv_size = priv_size;
+
+ return rte_mempool_create(name, n, elt_size,
+ cache_size, sizeof(struct rte_pktmbuf_pool_private),
+ rte_pktmbuf_pool_init, &mbp_priv, rte_pktmbuf_init, NULL,
+ socket_id, 0);
+}
+
+/* do some sanity checks on a mbuf: panic if it fails */
+void
+rte_mbuf_sanity_check(const struct rte_mbuf *m, int is_header)
+{
+ const struct rte_mbuf *m_seg;
+ unsigned nb_segs;
+
+ if (m == NULL)
+ rte_panic("mbuf is NULL\n");
+
+ /* generic checks */
+ if (m->pool == NULL)
+ rte_panic("bad mbuf pool\n");
+ if (m->buf_physaddr == 0)
+ rte_panic("bad phys addr\n");
+ if (m->buf_addr == NULL)
+ rte_panic("bad virt addr\n");
+
+ uint16_t cnt = rte_mbuf_refcnt_read(m);
+ if ((cnt == 0) || (cnt == UINT16_MAX))
+ rte_panic("bad ref cnt\n");
+
+ /* nothing to check for sub-segments */
+ if (is_header == 0)
+ return;
+
+ nb_segs = m->nb_segs;
+ m_seg = m;
+ while (m_seg && nb_segs != 0) {
+ m_seg = m_seg->next;
+ nb_segs--;
+ }
+ if (nb_segs != 0)
+ rte_panic("bad nb_segs\n");
+}
+
+/* dump a mbuf on console */
+void
+rte_pktmbuf_dump(FILE *f, const struct rte_mbuf *m, unsigned dump_len)
+{
+ unsigned int len;
+ unsigned nb_segs;
+
+ __rte_mbuf_sanity_check(m, 1);
+
+ fprintf(f, "dump mbuf at 0x%p, phys=%"PRIx64", buf_len=%u\n",
+ m, (uint64_t)m->buf_physaddr, (unsigned)m->buf_len);
+ fprintf(f, " pkt_len=%"PRIu32", ol_flags=%"PRIx64", nb_segs=%u, "
+ "in_port=%u\n", m->pkt_len, m->ol_flags,
+ (unsigned)m->nb_segs, (unsigned)m->port);
+ nb_segs = m->nb_segs;
+
+ while (m && nb_segs != 0) {
+ __rte_mbuf_sanity_check(m, 0);
+
+ fprintf(f, " segment at 0x%p, data=0x%p, data_len=%u\n",
+ m, rte_pktmbuf_mtod(m, void *), (unsigned)m->data_len);
+ len = dump_len;
+ if (len > m->data_len)
+ len = m->data_len;
+ if (len != 0)
+ rte_hexdump(f, NULL, rte_pktmbuf_mtod(m, void *), len);
+ dump_len -= len;
+ m = m->next;
+ nb_segs --;
+ }
+}
+
+/*
+ * Get the name of a RX offload flag. Must be kept synchronized with flag
+ * definitions in rte_mbuf.h.
+ */
+const char *rte_get_rx_ol_flag_name(uint64_t mask)
+{
+ switch (mask) {
+ case PKT_RX_VLAN_PKT: return "PKT_RX_VLAN_PKT";
+ case PKT_RX_RSS_HASH: return "PKT_RX_RSS_HASH";
+ case PKT_RX_FDIR: return "PKT_RX_FDIR";
+ case PKT_RX_L4_CKSUM_BAD: return "PKT_RX_L4_CKSUM_BAD";
+ case PKT_RX_IP_CKSUM_BAD: return "PKT_RX_IP_CKSUM_BAD";
+ case PKT_RX_EIP_CKSUM_BAD: return "PKT_RX_EIP_CKSUM_BAD";
+ /* case PKT_RX_OVERSIZE: return "PKT_RX_OVERSIZE"; */
+ /* case PKT_RX_HBUF_OVERFLOW: return "PKT_RX_HBUF_OVERFLOW"; */
+ /* case PKT_RX_RECIP_ERR: return "PKT_RX_RECIP_ERR"; */
+ /* case PKT_RX_MAC_ERR: return "PKT_RX_MAC_ERR"; */
+ case PKT_RX_IEEE1588_PTP: return "PKT_RX_IEEE1588_PTP";
+ case PKT_RX_IEEE1588_TMST: return "PKT_RX_IEEE1588_TMST";
+ default: return NULL;
+ }
+}
+
+/*
+ * Get the name of a TX offload flag. Must be kept synchronized with flag
+ * definitions in rte_mbuf.h.
+ */
+const char *rte_get_tx_ol_flag_name(uint64_t mask)
+{
+ switch (mask) {
+ case PKT_TX_VLAN_PKT: return "PKT_TX_VLAN_PKT";
+ case PKT_TX_IP_CKSUM: return "PKT_TX_IP_CKSUM";
+ case PKT_TX_TCP_CKSUM: return "PKT_TX_TCP_CKSUM";
+ case PKT_TX_SCTP_CKSUM: return "PKT_TX_SCTP_CKSUM";
+ case PKT_TX_UDP_CKSUM: return "PKT_TX_UDP_CKSUM";
+ case PKT_TX_IEEE1588_TMST: return "PKT_TX_IEEE1588_TMST";
+ case PKT_TX_TCP_SEG: return "PKT_TX_TCP_SEG";
+ case PKT_TX_IPV4: return "PKT_TX_IPV4";
+ case PKT_TX_IPV6: return "PKT_TX_IPV6";
+ case PKT_TX_OUTER_IP_CKSUM: return "PKT_TX_OUTER_IP_CKSUM";
+ case PKT_TX_OUTER_IPV4: return "PKT_TX_OUTER_IPV4";
+ case PKT_TX_OUTER_IPV6: return "PKT_TX_OUTER_IPV6";
+ default: return NULL;
+ }
+}
diff --git a/lib/librte_mbuf/rte_mbuf.h b/lib/librte_mbuf/rte_mbuf.h
new file mode 100644
index 00000000..75a227d8
--- /dev/null
+++ b/lib/librte_mbuf/rte_mbuf.h
@@ -0,0 +1,1946 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * Copyright 2014 6WIND S.A.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_MBUF_H_
+#define _RTE_MBUF_H_
+
+/**
+ * @file
+ * RTE Mbuf
+ *
+ * The mbuf library provides the ability to create and destroy buffers
+ * that may be used by the RTE application to store message
+ * buffers. The message buffers are stored in a mempool, using the
+ * RTE mempool library.
+ *
+ * This library provide an API to allocate/free packet mbufs, which are
+ * used to carry network packets.
+ *
+ * To understand the concepts of packet buffers or mbufs, you
+ * should read "TCP/IP Illustrated, Volume 2: The Implementation,
+ * Addison-Wesley, 1995, ISBN 0-201-63354-X from Richard Stevens"
+ * http://www.kohala.com/start/tcpipiv2.html
+ */
+
+#include <stdint.h>
+#include <rte_common.h>
+#include <rte_mempool.h>
+#include <rte_memory.h>
+#include <rte_atomic.h>
+#include <rte_prefetch.h>
+#include <rte_branch_prediction.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* deprecated options */
+#pragma GCC poison RTE_MBUF_SCATTER_GATHER
+#pragma GCC poison RTE_MBUF_REFCNT
+
+/*
+ * Packet Offload Features Flags. It also carry packet type information.
+ * Critical resources. Both rx/tx shared these bits. Be cautious on any change
+ *
+ * - RX flags start at bit position zero, and get added to the left of previous
+ * flags.
+ * - The most-significant 3 bits are reserved for generic mbuf flags
+ * - TX flags therefore start at bit position 60 (i.e. 63-3), and new flags get
+ * added to the right of the previously defined flags i.e. they should count
+ * downwards, not upwards.
+ *
+ * Keep these flags synchronized with rte_get_rx_ol_flag_name() and
+ * rte_get_tx_ol_flag_name().
+ */
+#define PKT_RX_VLAN_PKT (1ULL << 0) /**< RX packet is a 802.1q VLAN packet. */
+#define PKT_RX_RSS_HASH (1ULL << 1) /**< RX packet with RSS hash result. */
+#define PKT_RX_FDIR (1ULL << 2) /**< RX packet with FDIR match indicate. */
+#define PKT_RX_L4_CKSUM_BAD (1ULL << 3) /**< L4 cksum of RX pkt. is not OK. */
+#define PKT_RX_IP_CKSUM_BAD (1ULL << 4) /**< IP cksum of RX pkt. is not OK. */
+#define PKT_RX_EIP_CKSUM_BAD (1ULL << 5) /**< External IP header checksum error. */
+#define PKT_RX_OVERSIZE (0ULL << 0) /**< Num of desc of an RX pkt oversize. */
+#define PKT_RX_HBUF_OVERFLOW (0ULL << 0) /**< Header buffer overflow. */
+#define PKT_RX_RECIP_ERR (0ULL << 0) /**< Hardware processing error. */
+#define PKT_RX_MAC_ERR (0ULL << 0) /**< MAC error. */
+#define PKT_RX_IEEE1588_PTP (1ULL << 9) /**< RX IEEE1588 L2 Ethernet PT Packet. */
+#define PKT_RX_IEEE1588_TMST (1ULL << 10) /**< RX IEEE1588 L2/L4 timestamped packet.*/
+#define PKT_RX_FDIR_ID (1ULL << 13) /**< FD id reported if FDIR match. */
+#define PKT_RX_FDIR_FLX (1ULL << 14) /**< Flexible bytes reported if FDIR match. */
+#define PKT_RX_QINQ_PKT (1ULL << 15) /**< RX packet with double VLAN stripped. */
+/* add new RX flags here */
+
+/* add new TX flags here */
+
+/**
+ * Second VLAN insertion (QinQ) flag.
+ */
+#define PKT_TX_QINQ_PKT (1ULL << 49) /**< TX packet with double VLAN inserted. */
+
+/**
+ * TCP segmentation offload. To enable this offload feature for a
+ * packet to be transmitted on hardware supporting TSO:
+ * - set the PKT_TX_TCP_SEG flag in mbuf->ol_flags (this flag implies
+ * PKT_TX_TCP_CKSUM)
+ * - set the flag PKT_TX_IPV4 or PKT_TX_IPV6
+ * - if it's IPv4, set the PKT_TX_IP_CKSUM flag and write the IP checksum
+ * to 0 in the packet
+ * - fill the mbuf offload information: l2_len, l3_len, l4_len, tso_segsz
+ * - calculate the pseudo header checksum without taking ip_len in account,
+ * and set it in the TCP header. Refer to rte_ipv4_phdr_cksum() and
+ * rte_ipv6_phdr_cksum() that can be used as helpers.
+ */
+#define PKT_TX_TCP_SEG (1ULL << 50)
+
+#define PKT_TX_IEEE1588_TMST (1ULL << 51) /**< TX IEEE1588 packet to timestamp. */
+
+/**
+ * Bits 52+53 used for L4 packet type with checksum enabled: 00: Reserved,
+ * 01: TCP checksum, 10: SCTP checksum, 11: UDP checksum. To use hardware
+ * L4 checksum offload, the user needs to:
+ * - fill l2_len and l3_len in mbuf
+ * - set the flags PKT_TX_TCP_CKSUM, PKT_TX_SCTP_CKSUM or PKT_TX_UDP_CKSUM
+ * - set the flag PKT_TX_IPV4 or PKT_TX_IPV6
+ * - calculate the pseudo header checksum and set it in the L4 header (only
+ * for TCP or UDP). See rte_ipv4_phdr_cksum() and rte_ipv6_phdr_cksum().
+ * For SCTP, set the crc field to 0.
+ */
+#define PKT_TX_L4_NO_CKSUM (0ULL << 52) /**< Disable L4 cksum of TX pkt. */
+#define PKT_TX_TCP_CKSUM (1ULL << 52) /**< TCP cksum of TX pkt. computed by NIC. */
+#define PKT_TX_SCTP_CKSUM (2ULL << 52) /**< SCTP cksum of TX pkt. computed by NIC. */
+#define PKT_TX_UDP_CKSUM (3ULL << 52) /**< UDP cksum of TX pkt. computed by NIC. */
+#define PKT_TX_L4_MASK (3ULL << 52) /**< Mask for L4 cksum offload request. */
+
+/**
+ * Offload the IP checksum in the hardware. The flag PKT_TX_IPV4 should
+ * also be set by the application, although a PMD will only check
+ * PKT_TX_IP_CKSUM.
+ * - set the IP checksum field in the packet to 0
+ * - fill the mbuf offload information: l2_len, l3_len
+ */
+#define PKT_TX_IP_CKSUM (1ULL << 54)
+
+/**
+ * Packet is IPv4. This flag must be set when using any offload feature
+ * (TSO, L3 or L4 checksum) to tell the NIC that the packet is an IPv4
+ * packet. If the packet is a tunneled packet, this flag is related to
+ * the inner headers.
+ */
+#define PKT_TX_IPV4 (1ULL << 55)
+
+/**
+ * Packet is IPv6. This flag must be set when using an offload feature
+ * (TSO or L4 checksum) to tell the NIC that the packet is an IPv6
+ * packet. If the packet is a tunneled packet, this flag is related to
+ * the inner headers.
+ */
+#define PKT_TX_IPV6 (1ULL << 56)
+
+#define PKT_TX_VLAN_PKT (1ULL << 57) /**< TX packet is a 802.1q VLAN packet. */
+
+/**
+ * Offload the IP checksum of an external header in the hardware. The
+ * flag PKT_TX_OUTER_IPV4 should also be set by the application, alto ugh
+ * a PMD will only check PKT_TX_IP_CKSUM. The IP checksum field in the
+ * packet must be set to 0.
+ * - set the outer IP checksum field in the packet to 0
+ * - fill the mbuf offload information: outer_l2_len, outer_l3_len
+ */
+#define PKT_TX_OUTER_IP_CKSUM (1ULL << 58)
+
+/**
+ * Packet outer header is IPv4. This flag must be set when using any
+ * outer offload feature (L3 or L4 checksum) to tell the NIC that the
+ * outer header of the tunneled packet is an IPv4 packet.
+ */
+#define PKT_TX_OUTER_IPV4 (1ULL << 59)
+
+/**
+ * Packet outer header is IPv6. This flag must be set when using any
+ * outer offload feature (L4 checksum) to tell the NIC that the outer
+ * header of the tunneled packet is an IPv6 packet.
+ */
+#define PKT_TX_OUTER_IPV6 (1ULL << 60)
+
+#define __RESERVED (1ULL << 61) /**< reserved for future mbuf use */
+
+#define IND_ATTACHED_MBUF (1ULL << 62) /**< Indirect attached mbuf */
+
+/* Use final bit of flags to indicate a control mbuf */
+#define CTRL_MBUF_FLAG (1ULL << 63) /**< Mbuf contains control data */
+
+/*
+ * 32 bits are divided into several fields to mark packet types. Note that
+ * each field is indexical.
+ * - Bit 3:0 is for L2 types.
+ * - Bit 7:4 is for L3 or outer L3 (for tunneling case) types.
+ * - Bit 11:8 is for L4 or outer L4 (for tunneling case) types.
+ * - Bit 15:12 is for tunnel types.
+ * - Bit 19:16 is for inner L2 types.
+ * - Bit 23:20 is for inner L3 types.
+ * - Bit 27:24 is for inner L4 types.
+ * - Bit 31:28 is reserved.
+ *
+ * To be compatible with Vector PMD, RTE_PTYPE_L3_IPV4, RTE_PTYPE_L3_IPV4_EXT,
+ * RTE_PTYPE_L3_IPV6, RTE_PTYPE_L3_IPV6_EXT, RTE_PTYPE_L4_TCP, RTE_PTYPE_L4_UDP
+ * and RTE_PTYPE_L4_SCTP should be kept as below in a contiguous 7 bits.
+ *
+ * Note that L3 types values are selected for checking IPV4/IPV6 header from
+ * performance point of view. Reading annotations of RTE_ETH_IS_IPV4_HDR and
+ * RTE_ETH_IS_IPV6_HDR is needed for any future changes of L3 type values.
+ *
+ * Note that the packet types of the same packet recognized by different
+ * hardware may be different, as different hardware may have different
+ * capability of packet type recognition.
+ *
+ * examples:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=0x29
+ * | 'version'=6, 'next header'=0x3A
+ * | 'ICMPv6 header'>
+ * will be recognized on i40e hardware as packet type combination of,
+ * RTE_PTYPE_L2_ETHER |
+ * RTE_PTYPE_L3_IPV4_EXT_UNKNOWN |
+ * RTE_PTYPE_TUNNEL_IP |
+ * RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN |
+ * RTE_PTYPE_INNER_L4_ICMP.
+ *
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=0x2F
+ * | 'GRE header'
+ * | 'version'=6, 'next header'=0x11
+ * | 'UDP header'>
+ * will be recognized on i40e hardware as packet type combination of,
+ * RTE_PTYPE_L2_ETHER |
+ * RTE_PTYPE_L3_IPV6_EXT_UNKNOWN |
+ * RTE_PTYPE_TUNNEL_GRENAT |
+ * RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN |
+ * RTE_PTYPE_INNER_L4_UDP.
+ */
+#define RTE_PTYPE_UNKNOWN 0x00000000
+/**
+ * Ethernet packet type.
+ * It is used for outer packet for tunneling cases.
+ *
+ * Packet format:
+ * <'ether type'=[0x0800|0x86DD]>
+ */
+#define RTE_PTYPE_L2_ETHER 0x00000001
+/**
+ * Ethernet packet type for time sync.
+ *
+ * Packet format:
+ * <'ether type'=0x88F7>
+ */
+#define RTE_PTYPE_L2_ETHER_TIMESYNC 0x00000002
+/**
+ * ARP (Address Resolution Protocol) packet type.
+ *
+ * Packet format:
+ * <'ether type'=0x0806>
+ */
+#define RTE_PTYPE_L2_ETHER_ARP 0x00000003
+/**
+ * LLDP (Link Layer Discovery Protocol) packet type.
+ *
+ * Packet format:
+ * <'ether type'=0x88CC>
+ */
+#define RTE_PTYPE_L2_ETHER_LLDP 0x00000004
+/**
+ * Mask of layer 2 packet types.
+ * It is used for outer packet for tunneling cases.
+ */
+#define RTE_PTYPE_L2_MASK 0x0000000f
+/**
+ * IP (Internet Protocol) version 4 packet type.
+ * It is used for outer packet for tunneling cases, and does not contain any
+ * header option.
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'ihl'=5>
+ */
+#define RTE_PTYPE_L3_IPV4 0x00000010
+/**
+ * IP (Internet Protocol) version 4 packet type.
+ * It is used for outer packet for tunneling cases, and contains header
+ * options.
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'ihl'=[6-15], 'options'>
+ */
+#define RTE_PTYPE_L3_IPV4_EXT 0x00000030
+/**
+ * IP (Internet Protocol) version 6 packet type.
+ * It is used for outer packet for tunneling cases, and does not contain any
+ * extension header.
+ *
+ * Packet format:
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=0x3B>
+ */
+#define RTE_PTYPE_L3_IPV6 0x00000040
+/**
+ * IP (Internet Protocol) version 4 packet type.
+ * It is used for outer packet for tunneling cases, and may or maynot contain
+ * header options.
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'ihl'=[5-15], <'options'>>
+ */
+#define RTE_PTYPE_L3_IPV4_EXT_UNKNOWN 0x00000090
+/**
+ * IP (Internet Protocol) version 6 packet type.
+ * It is used for outer packet for tunneling cases, and contains extension
+ * headers.
+ *
+ * Packet format:
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=[0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87],
+ * 'extension headers'>
+ */
+#define RTE_PTYPE_L3_IPV6_EXT 0x000000c0
+/**
+ * IP (Internet Protocol) version 6 packet type.
+ * It is used for outer packet for tunneling cases, and may or maynot contain
+ * extension headers.
+ *
+ * Packet format:
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=[0x3B|0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87],
+ * <'extension headers'>>
+ */
+#define RTE_PTYPE_L3_IPV6_EXT_UNKNOWN 0x000000e0
+/**
+ * Mask of layer 3 packet types.
+ * It is used for outer packet for tunneling cases.
+ */
+#define RTE_PTYPE_L3_MASK 0x000000f0
+/**
+ * TCP (Transmission Control Protocol) packet type.
+ * It is used for outer packet for tunneling cases.
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=6, 'MF'=0>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=6>
+ */
+#define RTE_PTYPE_L4_TCP 0x00000100
+/**
+ * UDP (User Datagram Protocol) packet type.
+ * It is used for outer packet for tunneling cases.
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=17, 'MF'=0>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=17>
+ */
+#define RTE_PTYPE_L4_UDP 0x00000200
+/**
+ * Fragmented IP (Internet Protocol) packet type.
+ * It is used for outer packet for tunneling cases.
+ *
+ * It refers to those packets of any IP types, which can be recognized as
+ * fragmented. A fragmented packet cannot be recognized as any other L4 types
+ * (RTE_PTYPE_L4_TCP, RTE_PTYPE_L4_UDP, RTE_PTYPE_L4_SCTP, RTE_PTYPE_L4_ICMP,
+ * RTE_PTYPE_L4_NONFRAG).
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'MF'=1>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=44>
+ */
+#define RTE_PTYPE_L4_FRAG 0x00000300
+/**
+ * SCTP (Stream Control Transmission Protocol) packet type.
+ * It is used for outer packet for tunneling cases.
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=132, 'MF'=0>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=132>
+ */
+#define RTE_PTYPE_L4_SCTP 0x00000400
+/**
+ * ICMP (Internet Control Message Protocol) packet type.
+ * It is used for outer packet for tunneling cases.
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=1, 'MF'=0>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=1>
+ */
+#define RTE_PTYPE_L4_ICMP 0x00000500
+/**
+ * Non-fragmented IP (Internet Protocol) packet type.
+ * It is used for outer packet for tunneling cases.
+ *
+ * It refers to those packets of any IP types, while cannot be recognized as
+ * any of above L4 types (RTE_PTYPE_L4_TCP, RTE_PTYPE_L4_UDP,
+ * RTE_PTYPE_L4_FRAG, RTE_PTYPE_L4_SCTP, RTE_PTYPE_L4_ICMP).
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'!=[6|17|132|1], 'MF'=0>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'!=[6|17|44|132|1]>
+ */
+#define RTE_PTYPE_L4_NONFRAG 0x00000600
+/**
+ * Mask of layer 4 packet types.
+ * It is used for outer packet for tunneling cases.
+ */
+#define RTE_PTYPE_L4_MASK 0x00000f00
+/**
+ * IP (Internet Protocol) in IP (Internet Protocol) tunneling packet type.
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=[4|41]>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=[4|41]>
+ */
+#define RTE_PTYPE_TUNNEL_IP 0x00001000
+/**
+ * GRE (Generic Routing Encapsulation) tunneling packet type.
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=47>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=47>
+ */
+#define RTE_PTYPE_TUNNEL_GRE 0x00002000
+/**
+ * VXLAN (Virtual eXtensible Local Area Network) tunneling packet type.
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=17
+ * | 'destination port'=4798>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=17
+ * | 'destination port'=4798>
+ */
+#define RTE_PTYPE_TUNNEL_VXLAN 0x00003000
+/**
+ * NVGRE (Network Virtualization using Generic Routing Encapsulation) tunneling
+ * packet type.
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=47
+ * | 'protocol type'=0x6558>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=47
+ * | 'protocol type'=0x6558'>
+ */
+#define RTE_PTYPE_TUNNEL_NVGRE 0x00004000
+/**
+ * GENEVE (Generic Network Virtualization Encapsulation) tunneling packet type.
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=17
+ * | 'destination port'=6081>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=17
+ * | 'destination port'=6081>
+ */
+#define RTE_PTYPE_TUNNEL_GENEVE 0x00005000
+/**
+ * Tunneling packet type of Teredo, VXLAN (Virtual eXtensible Local Area
+ * Network) or GRE (Generic Routing Encapsulation) could be recognized as this
+ * packet type, if they can not be recognized independently as of hardware
+ * capability.
+ */
+#define RTE_PTYPE_TUNNEL_GRENAT 0x00006000
+/**
+ * Mask of tunneling packet types.
+ */
+#define RTE_PTYPE_TUNNEL_MASK 0x0000f000
+/**
+ * Ethernet packet type.
+ * It is used for inner packet type only.
+ *
+ * Packet format (inner only):
+ * <'ether type'=[0x800|0x86DD]>
+ */
+#define RTE_PTYPE_INNER_L2_ETHER 0x00010000
+/**
+ * Ethernet packet type with VLAN (Virtual Local Area Network) tag.
+ *
+ * Packet format (inner only):
+ * <'ether type'=[0x800|0x86DD], vlan=[1-4095]>
+ */
+#define RTE_PTYPE_INNER_L2_ETHER_VLAN 0x00020000
+/**
+ * Mask of inner layer 2 packet types.
+ */
+#define RTE_PTYPE_INNER_L2_MASK 0x000f0000
+/**
+ * IP (Internet Protocol) version 4 packet type.
+ * It is used for inner packet only, and does not contain any header option.
+ *
+ * Packet format (inner only):
+ * <'ether type'=0x0800
+ * | 'version'=4, 'ihl'=5>
+ */
+#define RTE_PTYPE_INNER_L3_IPV4 0x00100000
+/**
+ * IP (Internet Protocol) version 4 packet type.
+ * It is used for inner packet only, and contains header options.
+ *
+ * Packet format (inner only):
+ * <'ether type'=0x0800
+ * | 'version'=4, 'ihl'=[6-15], 'options'>
+ */
+#define RTE_PTYPE_INNER_L3_IPV4_EXT 0x00200000
+/**
+ * IP (Internet Protocol) version 6 packet type.
+ * It is used for inner packet only, and does not contain any extension header.
+ *
+ * Packet format (inner only):
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=0x3B>
+ */
+#define RTE_PTYPE_INNER_L3_IPV6 0x00300000
+/**
+ * IP (Internet Protocol) version 4 packet type.
+ * It is used for inner packet only, and may or maynot contain header options.
+ *
+ * Packet format (inner only):
+ * <'ether type'=0x0800
+ * | 'version'=4, 'ihl'=[5-15], <'options'>>
+ */
+#define RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN 0x00400000
+/**
+ * IP (Internet Protocol) version 6 packet type.
+ * It is used for inner packet only, and contains extension headers.
+ *
+ * Packet format (inner only):
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=[0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87],
+ * 'extension headers'>
+ */
+#define RTE_PTYPE_INNER_L3_IPV6_EXT 0x00500000
+/**
+ * IP (Internet Protocol) version 6 packet type.
+ * It is used for inner packet only, and may or maynot contain extension
+ * headers.
+ *
+ * Packet format (inner only):
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=[0x3B|0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87],
+ * <'extension headers'>>
+ */
+#define RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN 0x00600000
+/**
+ * Mask of inner layer 3 packet types.
+ */
+#define RTE_PTYPE_INNER_L3_MASK 0x00f00000
+/**
+ * TCP (Transmission Control Protocol) packet type.
+ * It is used for inner packet only.
+ *
+ * Packet format (inner only):
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=6, 'MF'=0>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=6>
+ */
+#define RTE_PTYPE_INNER_L4_TCP 0x01000000
+/**
+ * UDP (User Datagram Protocol) packet type.
+ * It is used for inner packet only.
+ *
+ * Packet format (inner only):
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=17, 'MF'=0>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=17>
+ */
+#define RTE_PTYPE_INNER_L4_UDP 0x02000000
+/**
+ * Fragmented IP (Internet Protocol) packet type.
+ * It is used for inner packet only, and may or maynot have layer 4 packet.
+ *
+ * Packet format (inner only):
+ * <'ether type'=0x0800
+ * | 'version'=4, 'MF'=1>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=44>
+ */
+#define RTE_PTYPE_INNER_L4_FRAG 0x03000000
+/**
+ * SCTP (Stream Control Transmission Protocol) packet type.
+ * It is used for inner packet only.
+ *
+ * Packet format (inner only):
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=132, 'MF'=0>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=132>
+ */
+#define RTE_PTYPE_INNER_L4_SCTP 0x04000000
+/**
+ * ICMP (Internet Control Message Protocol) packet type.
+ * It is used for inner packet only.
+ *
+ * Packet format (inner only):
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=1, 'MF'=0>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=1>
+ */
+#define RTE_PTYPE_INNER_L4_ICMP 0x05000000
+/**
+ * Non-fragmented IP (Internet Protocol) packet type.
+ * It is used for inner packet only, and may or maynot have other unknown layer
+ * 4 packet types.
+ *
+ * Packet format (inner only):
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'!=[6|17|132|1], 'MF'=0>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'!=[6|17|44|132|1]>
+ */
+#define RTE_PTYPE_INNER_L4_NONFRAG 0x06000000
+/**
+ * Mask of inner layer 4 packet types.
+ */
+#define RTE_PTYPE_INNER_L4_MASK 0x0f000000
+
+/**
+ * Check if the (outer) L3 header is IPv4. To avoid comparing IPv4 types one by
+ * one, bit 4 is selected to be used for IPv4 only. Then checking bit 4 can
+ * determine if it is an IPV4 packet.
+ */
+#define RTE_ETH_IS_IPV4_HDR(ptype) ((ptype) & RTE_PTYPE_L3_IPV4)
+
+/**
+ * Check if the (outer) L3 header is IPv4. To avoid comparing IPv4 types one by
+ * one, bit 6 is selected to be used for IPv4 only. Then checking bit 6 can
+ * determine if it is an IPV4 packet.
+ */
+#define RTE_ETH_IS_IPV6_HDR(ptype) ((ptype) & RTE_PTYPE_L3_IPV6)
+
+/* Check if it is a tunneling packet */
+#define RTE_ETH_IS_TUNNEL_PKT(ptype) ((ptype) & (RTE_PTYPE_TUNNEL_MASK | \
+ RTE_PTYPE_INNER_L2_MASK | \
+ RTE_PTYPE_INNER_L3_MASK | \
+ RTE_PTYPE_INNER_L4_MASK))
+
+/** Alignment constraint of mbuf private area. */
+#define RTE_MBUF_PRIV_ALIGN 8
+
+/**
+ * Get the name of a RX offload flag
+ *
+ * @param mask
+ * The mask describing the flag.
+ * @return
+ * The name of this flag, or NULL if it's not a valid RX flag.
+ */
+const char *rte_get_rx_ol_flag_name(uint64_t mask);
+
+/**
+ * Get the name of a TX offload flag
+ *
+ * @param mask
+ * The mask describing the flag. Usually only one bit must be set.
+ * Several bits can be given if they belong to the same mask.
+ * Ex: PKT_TX_L4_MASK.
+ * @return
+ * The name of this flag, or NULL if it's not a valid TX flag.
+ */
+const char *rte_get_tx_ol_flag_name(uint64_t mask);
+
+/**
+ * Some NICs need at least 2KB buffer to RX standard Ethernet frame without
+ * splitting it into multiple segments.
+ * So, for mbufs that planned to be involved into RX/TX, the recommended
+ * minimal buffer length is 2KB + RTE_PKTMBUF_HEADROOM.
+ */
+#define RTE_MBUF_DEFAULT_DATAROOM 2048
+#define RTE_MBUF_DEFAULT_BUF_SIZE \
+ (RTE_MBUF_DEFAULT_DATAROOM + RTE_PKTMBUF_HEADROOM)
+
+/* define a set of marker types that can be used to refer to set points in the
+ * mbuf */
+typedef void *MARKER[0]; /**< generic marker for a point in a structure */
+typedef uint8_t MARKER8[0]; /**< generic marker with 1B alignment */
+typedef uint64_t MARKER64[0]; /**< marker that allows us to overwrite 8 bytes
+ * with a single assignment */
+
+/**
+ * The generic rte_mbuf, containing a packet mbuf.
+ */
+struct rte_mbuf {
+ MARKER cacheline0;
+
+ void *buf_addr; /**< Virtual address of segment buffer. */
+ phys_addr_t buf_physaddr; /**< Physical address of segment buffer. */
+
+ uint16_t buf_len; /**< Length of segment buffer. */
+
+ /* next 6 bytes are initialised on RX descriptor rearm */
+ MARKER8 rearm_data;
+ uint16_t data_off;
+
+ /**
+ * 16-bit Reference counter.
+ * It should only be accessed using the following functions:
+ * rte_mbuf_refcnt_update(), rte_mbuf_refcnt_read(), and
+ * rte_mbuf_refcnt_set(). The functionality of these functions (atomic,
+ * or non-atomic) is controlled by the CONFIG_RTE_MBUF_REFCNT_ATOMIC
+ * config option.
+ */
+ union {
+ rte_atomic16_t refcnt_atomic; /**< Atomically accessed refcnt */
+ uint16_t refcnt; /**< Non-atomically accessed refcnt */
+ };
+ uint8_t nb_segs; /**< Number of segments. */
+ uint8_t port; /**< Input port. */
+
+ uint64_t ol_flags; /**< Offload features. */
+
+ /* remaining bytes are set on RX when pulling packet from descriptor */
+ MARKER rx_descriptor_fields1;
+
+ /*
+ * The packet type, which is the combination of outer/inner L2, L3, L4
+ * and tunnel types.
+ */
+ union {
+ uint32_t packet_type; /**< L2/L3/L4 and tunnel information. */
+ struct {
+ uint32_t l2_type:4; /**< (Outer) L2 type. */
+ uint32_t l3_type:4; /**< (Outer) L3 type. */
+ uint32_t l4_type:4; /**< (Outer) L4 type. */
+ uint32_t tun_type:4; /**< Tunnel type. */
+ uint32_t inner_l2_type:4; /**< Inner L2 type. */
+ uint32_t inner_l3_type:4; /**< Inner L3 type. */
+ uint32_t inner_l4_type:4; /**< Inner L4 type. */
+ };
+ };
+
+ uint32_t pkt_len; /**< Total pkt len: sum of all segments. */
+ uint16_t data_len; /**< Amount of data in segment buffer. */
+ uint16_t vlan_tci; /**< VLAN Tag Control Identifier (CPU order) */
+
+ union {
+ uint32_t rss; /**< RSS hash result if RSS enabled */
+ struct {
+ union {
+ struct {
+ uint16_t hash;
+ uint16_t id;
+ };
+ uint32_t lo;
+ /**< Second 4 flexible bytes */
+ };
+ uint32_t hi;
+ /**< First 4 flexible bytes or FD ID, dependent on
+ PKT_RX_FDIR_* flag in ol_flags. */
+ } fdir; /**< Filter identifier if FDIR enabled */
+ struct {
+ uint32_t lo;
+ uint32_t hi;
+ } sched; /**< Hierarchical scheduler */
+ uint32_t usr; /**< User defined tags. See rte_distributor_process() */
+ } hash; /**< hash information */
+
+ uint32_t seqn; /**< Sequence number. See also rte_reorder_insert() */
+
+ uint16_t vlan_tci_outer; /**< Outer VLAN Tag Control Identifier (CPU order) */
+
+ /* second cache line - fields only used in slow path or on TX */
+ MARKER cacheline1 __rte_cache_min_aligned;
+
+ union {
+ void *userdata; /**< Can be used for external metadata */
+ uint64_t udata64; /**< Allow 8-byte userdata on 32-bit */
+ };
+
+ struct rte_mempool *pool; /**< Pool from which mbuf was allocated. */
+ struct rte_mbuf *next; /**< Next segment of scattered packet. */
+
+ /* fields to support TX offloads */
+ union {
+ uint64_t tx_offload; /**< combined for easy fetch */
+ struct {
+ uint64_t l2_len:7; /**< L2 (MAC) Header Length. */
+ uint64_t l3_len:9; /**< L3 (IP) Header Length. */
+ uint64_t l4_len:8; /**< L4 (TCP/UDP) Header Length. */
+ uint64_t tso_segsz:16; /**< TCP TSO segment size */
+
+ /* fields for TX offloading of tunnels */
+ uint64_t outer_l3_len:9; /**< Outer L3 (IP) Hdr Length. */
+ uint64_t outer_l2_len:7; /**< Outer L2 (MAC) Hdr Length. */
+
+ /* uint64_t unused:8; */
+ };
+ };
+
+ /** Size of the application private data. In case of an indirect
+ * mbuf, it stores the direct mbuf private data size. */
+ uint16_t priv_size;
+
+ /** Timesync flags for use with IEEE1588. */
+ uint16_t timesync;
+} __rte_cache_aligned;
+
+static inline uint16_t rte_pktmbuf_priv_size(struct rte_mempool *mp);
+
+/**
+ * Return the DMA address of the beginning of the mbuf data
+ *
+ * @param mb
+ * The pointer to the mbuf.
+ * @return
+ * The physical address of the beginning of the mbuf data
+ */
+static inline phys_addr_t
+rte_mbuf_data_dma_addr(const struct rte_mbuf *mb)
+{
+ return mb->buf_physaddr + mb->data_off;
+}
+
+/**
+ * Return the default DMA address of the beginning of the mbuf data
+ *
+ * This function is used by drivers in their receive function, as it
+ * returns the location where data should be written by the NIC, taking
+ * the default headroom in account.
+ *
+ * @param mb
+ * The pointer to the mbuf.
+ * @return
+ * The physical address of the beginning of the mbuf data
+ */
+static inline phys_addr_t
+rte_mbuf_data_dma_addr_default(const struct rte_mbuf *mb)
+{
+ return mb->buf_physaddr + RTE_PKTMBUF_HEADROOM;
+}
+
+/**
+ * Return the mbuf owning the data buffer address of an indirect mbuf.
+ *
+ * @param mi
+ * The pointer to the indirect mbuf.
+ * @return
+ * The address of the direct mbuf corresponding to buffer_addr.
+ */
+static inline struct rte_mbuf *
+rte_mbuf_from_indirect(struct rte_mbuf *mi)
+{
+ return (struct rte_mbuf *)RTE_PTR_SUB(mi->buf_addr, sizeof(*mi) + mi->priv_size);
+}
+
+/**
+ * Return the buffer address embedded in the given mbuf.
+ *
+ * @param md
+ * The pointer to the mbuf.
+ * @return
+ * The address of the data buffer owned by the mbuf.
+ */
+static inline char *
+rte_mbuf_to_baddr(struct rte_mbuf *md)
+{
+ char *buffer_addr;
+ buffer_addr = (char *)md + sizeof(*md) + rte_pktmbuf_priv_size(md->pool);
+ return buffer_addr;
+}
+
+/**
+ * Returns TRUE if given mbuf is indirect, or FALSE otherwise.
+ */
+#define RTE_MBUF_INDIRECT(mb) ((mb)->ol_flags & IND_ATTACHED_MBUF)
+
+/**
+ * Returns TRUE if given mbuf is direct, or FALSE otherwise.
+ */
+#define RTE_MBUF_DIRECT(mb) (!RTE_MBUF_INDIRECT(mb))
+
+/**
+ * Private data in case of pktmbuf pool.
+ *
+ * A structure that contains some pktmbuf_pool-specific data that are
+ * appended after the mempool structure (in private data).
+ */
+struct rte_pktmbuf_pool_private {
+ uint16_t mbuf_data_room_size; /**< Size of data space in each mbuf. */
+ uint16_t mbuf_priv_size; /**< Size of private area in each mbuf. */
+};
+
+#ifdef RTE_LIBRTE_MBUF_DEBUG
+
+/** check mbuf type in debug mode */
+#define __rte_mbuf_sanity_check(m, is_h) rte_mbuf_sanity_check(m, is_h)
+
+/** check mbuf type in debug mode if mbuf pointer is not null */
+#define __rte_mbuf_sanity_check_raw(m, is_h) do { \
+ if ((m) != NULL) \
+ rte_mbuf_sanity_check(m, is_h); \
+} while (0)
+
+/** MBUF asserts in debug mode */
+#define RTE_MBUF_ASSERT(exp) \
+if (!(exp)) { \
+ rte_panic("line%d\tassert \"" #exp "\" failed\n", __LINE__); \
+}
+
+#else /* RTE_LIBRTE_MBUF_DEBUG */
+
+/** check mbuf type in debug mode */
+#define __rte_mbuf_sanity_check(m, is_h) do { } while (0)
+
+/** check mbuf type in debug mode if mbuf pointer is not null */
+#define __rte_mbuf_sanity_check_raw(m, is_h) do { } while (0)
+
+/** MBUF asserts in debug mode */
+#define RTE_MBUF_ASSERT(exp) do { } while (0)
+
+#endif /* RTE_LIBRTE_MBUF_DEBUG */
+
+#ifdef RTE_MBUF_REFCNT_ATOMIC
+
+/**
+ * Reads the value of an mbuf's refcnt.
+ * @param m
+ * Mbuf to read
+ * @return
+ * Reference count number.
+ */
+static inline uint16_t
+rte_mbuf_refcnt_read(const struct rte_mbuf *m)
+{
+ return (uint16_t)(rte_atomic16_read(&m->refcnt_atomic));
+}
+
+/**
+ * Sets an mbuf's refcnt to a defined value.
+ * @param m
+ * Mbuf to update
+ * @param new_value
+ * Value set
+ */
+static inline void
+rte_mbuf_refcnt_set(struct rte_mbuf *m, uint16_t new_value)
+{
+ rte_atomic16_set(&m->refcnt_atomic, new_value);
+}
+
+/**
+ * Adds given value to an mbuf's refcnt and returns its new value.
+ * @param m
+ * Mbuf to update
+ * @param value
+ * Value to add/subtract
+ * @return
+ * Updated value
+ */
+static inline uint16_t
+rte_mbuf_refcnt_update(struct rte_mbuf *m, int16_t value)
+{
+ /*
+ * The atomic_add is an expensive operation, so we don't want to
+ * call it in the case where we know we are the uniq holder of
+ * this mbuf (i.e. ref_cnt == 1). Otherwise, an atomic
+ * operation has to be used because concurrent accesses on the
+ * reference counter can occur.
+ */
+ if (likely(rte_mbuf_refcnt_read(m) == 1)) {
+ rte_mbuf_refcnt_set(m, 1 + value);
+ return 1 + value;
+ }
+
+ return (uint16_t)(rte_atomic16_add_return(&m->refcnt_atomic, value));
+}
+
+#else /* ! RTE_MBUF_REFCNT_ATOMIC */
+
+/**
+ * Adds given value to an mbuf's refcnt and returns its new value.
+ */
+static inline uint16_t
+rte_mbuf_refcnt_update(struct rte_mbuf *m, int16_t value)
+{
+ m->refcnt = (uint16_t)(m->refcnt + value);
+ return m->refcnt;
+}
+
+/**
+ * Reads the value of an mbuf's refcnt.
+ */
+static inline uint16_t
+rte_mbuf_refcnt_read(const struct rte_mbuf *m)
+{
+ return m->refcnt;
+}
+
+/**
+ * Sets an mbuf's refcnt to the defined value.
+ */
+static inline void
+rte_mbuf_refcnt_set(struct rte_mbuf *m, uint16_t new_value)
+{
+ m->refcnt = new_value;
+}
+
+#endif /* RTE_MBUF_REFCNT_ATOMIC */
+
+/** Mbuf prefetch */
+#define RTE_MBUF_PREFETCH_TO_FREE(m) do { \
+ if ((m) != NULL) \
+ rte_prefetch0(m); \
+} while (0)
+
+
+/**
+ * Sanity checks on an mbuf.
+ *
+ * Check the consistency of the given mbuf. The function will cause a
+ * panic if corruption is detected.
+ *
+ * @param m
+ * The mbuf to be checked.
+ * @param is_header
+ * True if the mbuf is a packet header, false if it is a sub-segment
+ * of a packet (in this case, some fields like nb_segs are not checked)
+ */
+void
+rte_mbuf_sanity_check(const struct rte_mbuf *m, int is_header);
+
+/**
+ * @internal Allocate a new mbuf from mempool *mp*.
+ * The use of that function is reserved for RTE internal needs.
+ * Please use rte_pktmbuf_alloc().
+ *
+ * @param mp
+ * The mempool from which mbuf is allocated.
+ * @return
+ * - The pointer to the new mbuf on success.
+ * - NULL if allocation failed.
+ */
+static inline struct rte_mbuf *__rte_mbuf_raw_alloc(struct rte_mempool *mp)
+{
+ struct rte_mbuf *m;
+ void *mb = NULL;
+ if (rte_mempool_get(mp, &mb) < 0)
+ return NULL;
+ m = (struct rte_mbuf *)mb;
+ RTE_MBUF_ASSERT(rte_mbuf_refcnt_read(m) == 0);
+ rte_mbuf_refcnt_set(m, 1);
+ return m;
+}
+
+/**
+ * @internal Put mbuf back into its original mempool.
+ * The use of that function is reserved for RTE internal needs.
+ * Please use rte_pktmbuf_free().
+ *
+ * @param m
+ * The mbuf to be freed.
+ */
+static inline void __attribute__((always_inline))
+__rte_mbuf_raw_free(struct rte_mbuf *m)
+{
+ RTE_MBUF_ASSERT(rte_mbuf_refcnt_read(m) == 0);
+ rte_mempool_put(m->pool, m);
+}
+
+/* Operations on ctrl mbuf */
+
+/**
+ * The control mbuf constructor.
+ *
+ * This function initializes some fields in an mbuf structure that are
+ * not modified by the user once created (mbuf type, origin pool, buffer
+ * start address, and so on). This function is given as a callback function
+ * to rte_mempool_create() at pool creation time.
+ *
+ * @param mp
+ * The mempool from which the mbuf is allocated.
+ * @param opaque_arg
+ * A pointer that can be used by the user to retrieve useful information
+ * for mbuf initialization. This pointer comes from the ``init_arg``
+ * parameter of rte_mempool_create().
+ * @param m
+ * The mbuf to initialize.
+ * @param i
+ * The index of the mbuf in the pool table.
+ */
+void rte_ctrlmbuf_init(struct rte_mempool *mp, void *opaque_arg,
+ void *m, unsigned i);
+
+/**
+ * Allocate a new mbuf (type is ctrl) from mempool *mp*.
+ *
+ * This new mbuf is initialized with data pointing to the beginning of
+ * buffer, and with a length of zero.
+ *
+ * @param mp
+ * The mempool from which the mbuf is allocated.
+ * @return
+ * - The pointer to the new mbuf on success.
+ * - NULL if allocation failed.
+ */
+#define rte_ctrlmbuf_alloc(mp) rte_pktmbuf_alloc(mp)
+
+/**
+ * Free a control mbuf back into its original mempool.
+ *
+ * @param m
+ * The control mbuf to be freed.
+ */
+#define rte_ctrlmbuf_free(m) rte_pktmbuf_free(m)
+
+/**
+ * A macro that returns the pointer to the carried data.
+ *
+ * The value that can be read or assigned.
+ *
+ * @param m
+ * The control mbuf.
+ */
+#define rte_ctrlmbuf_data(m) ((char *)((m)->buf_addr) + (m)->data_off)
+
+/**
+ * A macro that returns the length of the carried data.
+ *
+ * The value that can be read or assigned.
+ *
+ * @param m
+ * The control mbuf.
+ */
+#define rte_ctrlmbuf_len(m) rte_pktmbuf_data_len(m)
+
+/**
+ * Tests if an mbuf is a control mbuf
+ *
+ * @param m
+ * The mbuf to be tested
+ * @return
+ * - True (1) if the mbuf is a control mbuf
+ * - False(0) otherwise
+ */
+static inline int
+rte_is_ctrlmbuf(struct rte_mbuf *m)
+{
+ return !!(m->ol_flags & CTRL_MBUF_FLAG);
+}
+
+/* Operations on pkt mbuf */
+
+/**
+ * The packet mbuf constructor.
+ *
+ * This function initializes some fields in the mbuf structure that are
+ * not modified by the user once created (origin pool, buffer start
+ * address, and so on). This function is given as a callback function to
+ * rte_mempool_create() at pool creation time.
+ *
+ * @param mp
+ * The mempool from which mbufs originate.
+ * @param opaque_arg
+ * A pointer that can be used by the user to retrieve useful information
+ * for mbuf initialization. This pointer comes from the ``init_arg``
+ * parameter of rte_mempool_create().
+ * @param m
+ * The mbuf to initialize.
+ * @param i
+ * The index of the mbuf in the pool table.
+ */
+void rte_pktmbuf_init(struct rte_mempool *mp, void *opaque_arg,
+ void *m, unsigned i);
+
+
+/**
+ * A packet mbuf pool constructor.
+ *
+ * This function initializes the mempool private data in the case of a
+ * pktmbuf pool. This private data is needed by the driver. The
+ * function is given as a callback function to rte_mempool_create() at
+ * pool creation. It can be extended by the user, for example, to
+ * provide another packet size.
+ *
+ * @param mp
+ * The mempool from which mbufs originate.
+ * @param opaque_arg
+ * A pointer that can be used by the user to retrieve useful information
+ * for mbuf initialization. This pointer comes from the ``init_arg``
+ * parameter of rte_mempool_create().
+ */
+void rte_pktmbuf_pool_init(struct rte_mempool *mp, void *opaque_arg);
+
+/**
+ * Create a mbuf pool.
+ *
+ * This function creates and initializes a packet mbuf pool. It is
+ * a wrapper to rte_mempool_create() with the proper packet constructor
+ * and mempool constructor.
+ *
+ * @param name
+ * The name of the mbuf pool.
+ * @param n
+ * The number of elements in the mbuf pool. The optimum size (in terms
+ * of memory usage) for a mempool is when n is a power of two minus one:
+ * n = (2^q - 1).
+ * @param cache_size
+ * Size of the per-core object cache. See rte_mempool_create() for
+ * details.
+ * @param priv_size
+ * Size of application private are between the rte_mbuf structure
+ * and the data buffer. This value must be aligned to RTE_MBUF_PRIV_ALIGN.
+ * @param data_room_size
+ * Size of data buffer in each mbuf, including RTE_PKTMBUF_HEADROOM.
+ * @param socket_id
+ * The socket identifier where the memory should be allocated. The
+ * value can be *SOCKET_ID_ANY* if there is no NUMA constraint for the
+ * reserved zone.
+ * @return
+ * The pointer to the new allocated mempool, on success. NULL on error
+ * with rte_errno set appropriately. Possible rte_errno values include:
+ * - E_RTE_NO_CONFIG - function could not get pointer to rte_config structure
+ * - E_RTE_SECONDARY - function was called from a secondary process instance
+ * - EINVAL - cache size provided is too large, or priv_size is not aligned.
+ * - ENOSPC - the maximum number of memzones has already been allocated
+ * - EEXIST - a memzone with the same name already exists
+ * - ENOMEM - no appropriate memory area found in which to create memzone
+ */
+struct rte_mempool *
+rte_pktmbuf_pool_create(const char *name, unsigned n,
+ unsigned cache_size, uint16_t priv_size, uint16_t data_room_size,
+ int socket_id);
+
+/**
+ * Get the data room size of mbufs stored in a pktmbuf_pool
+ *
+ * The data room size is the amount of data that can be stored in a
+ * mbuf including the headroom (RTE_PKTMBUF_HEADROOM).
+ *
+ * @param mp
+ * The packet mbuf pool.
+ * @return
+ * The data room size of mbufs stored in this mempool.
+ */
+static inline uint16_t
+rte_pktmbuf_data_room_size(struct rte_mempool *mp)
+{
+ struct rte_pktmbuf_pool_private *mbp_priv;
+
+ mbp_priv = (struct rte_pktmbuf_pool_private *)rte_mempool_get_priv(mp);
+ return mbp_priv->mbuf_data_room_size;
+}
+
+/**
+ * Get the application private size of mbufs stored in a pktmbuf_pool
+ *
+ * The private size of mbuf is a zone located between the rte_mbuf
+ * structure and the data buffer where an application can store data
+ * associated to a packet.
+ *
+ * @param mp
+ * The packet mbuf pool.
+ * @return
+ * The private size of mbufs stored in this mempool.
+ */
+static inline uint16_t
+rte_pktmbuf_priv_size(struct rte_mempool *mp)
+{
+ struct rte_pktmbuf_pool_private *mbp_priv;
+
+ mbp_priv = (struct rte_pktmbuf_pool_private *)rte_mempool_get_priv(mp);
+ return mbp_priv->mbuf_priv_size;
+}
+
+/**
+ * Reset the fields of a packet mbuf to their default values.
+ *
+ * The given mbuf must have only one segment.
+ *
+ * @param m
+ * The packet mbuf to be resetted.
+ */
+static inline void rte_pktmbuf_reset(struct rte_mbuf *m)
+{
+ m->next = NULL;
+ m->pkt_len = 0;
+ m->tx_offload = 0;
+ m->vlan_tci = 0;
+ m->vlan_tci_outer = 0;
+ m->nb_segs = 1;
+ m->port = 0xff;
+
+ m->ol_flags = 0;
+ m->packet_type = 0;
+ m->data_off = (RTE_PKTMBUF_HEADROOM <= m->buf_len) ?
+ RTE_PKTMBUF_HEADROOM : m->buf_len;
+
+ m->data_len = 0;
+ __rte_mbuf_sanity_check(m, 1);
+}
+
+/**
+ * Allocate a new mbuf from a mempool.
+ *
+ * This new mbuf contains one segment, which has a length of 0. The pointer
+ * to data is initialized to have some bytes of headroom in the buffer
+ * (if buffer size allows).
+ *
+ * @param mp
+ * The mempool from which the mbuf is allocated.
+ * @return
+ * - The pointer to the new mbuf on success.
+ * - NULL if allocation failed.
+ */
+static inline struct rte_mbuf *rte_pktmbuf_alloc(struct rte_mempool *mp)
+{
+ struct rte_mbuf *m;
+ if ((m = __rte_mbuf_raw_alloc(mp)) != NULL)
+ rte_pktmbuf_reset(m);
+ return m;
+}
+
+/**
+ * Allocate a bulk of mbufs, initialize refcnt and reset the fields to default
+ * values.
+ *
+ * @param pool
+ * The mempool from which mbufs are allocated.
+ * @param mbufs
+ * Array of pointers to mbufs
+ * @param count
+ * Array size
+ * @return
+ * - 0: Success
+ */
+static inline int rte_pktmbuf_alloc_bulk(struct rte_mempool *pool,
+ struct rte_mbuf **mbufs, unsigned count)
+{
+ unsigned idx = 0;
+ int rc;
+
+ rc = rte_mempool_get_bulk(pool, (void **)mbufs, count);
+ if (unlikely(rc))
+ return rc;
+
+ /* To understand duff's device on loop unwinding optimization, see
+ * https://en.wikipedia.org/wiki/Duff's_device.
+ * Here while() loop is used rather than do() while{} to avoid extra
+ * check if count is zero.
+ */
+ switch (count % 4) {
+ case 0:
+ while (idx != count) {
+ RTE_MBUF_ASSERT(rte_mbuf_refcnt_read(mbufs[idx]) == 0);
+ rte_mbuf_refcnt_set(mbufs[idx], 1);
+ rte_pktmbuf_reset(mbufs[idx]);
+ idx++;
+ case 3:
+ RTE_MBUF_ASSERT(rte_mbuf_refcnt_read(mbufs[idx]) == 0);
+ rte_mbuf_refcnt_set(mbufs[idx], 1);
+ rte_pktmbuf_reset(mbufs[idx]);
+ idx++;
+ case 2:
+ RTE_MBUF_ASSERT(rte_mbuf_refcnt_read(mbufs[idx]) == 0);
+ rte_mbuf_refcnt_set(mbufs[idx], 1);
+ rte_pktmbuf_reset(mbufs[idx]);
+ idx++;
+ case 1:
+ RTE_MBUF_ASSERT(rte_mbuf_refcnt_read(mbufs[idx]) == 0);
+ rte_mbuf_refcnt_set(mbufs[idx], 1);
+ rte_pktmbuf_reset(mbufs[idx]);
+ idx++;
+ }
+ }
+ return 0;
+}
+
+/**
+ * Attach packet mbuf to another packet mbuf.
+ *
+ * After attachment we refer the mbuf we attached as 'indirect',
+ * while mbuf we attached to as 'direct'.
+ * Right now, not supported:
+ * - attachment for already indirect mbuf (e.g. - mi has to be direct).
+ * - mbuf we trying to attach (mi) is used by someone else
+ * e.g. it's reference counter is greater then 1.
+ *
+ * @param mi
+ * The indirect packet mbuf.
+ * @param m
+ * The packet mbuf we're attaching to.
+ */
+static inline void rte_pktmbuf_attach(struct rte_mbuf *mi, struct rte_mbuf *m)
+{
+ struct rte_mbuf *md;
+
+ RTE_MBUF_ASSERT(RTE_MBUF_DIRECT(mi) &&
+ rte_mbuf_refcnt_read(mi) == 1);
+
+ /* if m is not direct, get the mbuf that embeds the data */
+ if (RTE_MBUF_DIRECT(m))
+ md = m;
+ else
+ md = rte_mbuf_from_indirect(m);
+
+ rte_mbuf_refcnt_update(md, 1);
+ mi->priv_size = m->priv_size;
+ mi->buf_physaddr = m->buf_physaddr;
+ mi->buf_addr = m->buf_addr;
+ mi->buf_len = m->buf_len;
+
+ mi->next = m->next;
+ mi->data_off = m->data_off;
+ mi->data_len = m->data_len;
+ mi->port = m->port;
+ mi->vlan_tci = m->vlan_tci;
+ mi->vlan_tci_outer = m->vlan_tci_outer;
+ mi->tx_offload = m->tx_offload;
+ mi->hash = m->hash;
+
+ mi->next = NULL;
+ mi->pkt_len = mi->data_len;
+ mi->nb_segs = 1;
+ mi->ol_flags = m->ol_flags | IND_ATTACHED_MBUF;
+ mi->packet_type = m->packet_type;
+
+ __rte_mbuf_sanity_check(mi, 1);
+ __rte_mbuf_sanity_check(m, 0);
+}
+
+/**
+ * Detach an indirect packet mbuf.
+ *
+ * - restore original mbuf address and length values.
+ * - reset pktmbuf data and data_len to their default values.
+ * All other fields of the given packet mbuf will be left intact.
+ *
+ * @param m
+ * The indirect attached packet mbuf.
+ */
+static inline void rte_pktmbuf_detach(struct rte_mbuf *m)
+{
+ struct rte_mempool *mp = m->pool;
+ uint32_t mbuf_size, buf_len, priv_size;
+
+ priv_size = rte_pktmbuf_priv_size(mp);
+ mbuf_size = sizeof(struct rte_mbuf) + priv_size;
+ buf_len = rte_pktmbuf_data_room_size(mp);
+
+ m->priv_size = priv_size;
+ m->buf_addr = (char *)m + mbuf_size;
+ m->buf_physaddr = rte_mempool_virt2phy(mp, m) + mbuf_size;
+ m->buf_len = (uint16_t)buf_len;
+ m->data_off = RTE_MIN(RTE_PKTMBUF_HEADROOM, (uint16_t)m->buf_len);
+ m->data_len = 0;
+ m->ol_flags = 0;
+}
+
+static inline struct rte_mbuf* __attribute__((always_inline))
+__rte_pktmbuf_prefree_seg(struct rte_mbuf *m)
+{
+ __rte_mbuf_sanity_check(m, 0);
+
+ if (likely(rte_mbuf_refcnt_update(m, -1) == 0)) {
+
+ /* if this is an indirect mbuf, then
+ * - detach mbuf
+ * - free attached mbuf segment
+ */
+ if (RTE_MBUF_INDIRECT(m)) {
+ struct rte_mbuf *md = rte_mbuf_from_indirect(m);
+ rte_pktmbuf_detach(m);
+ if (rte_mbuf_refcnt_update(md, -1) == 0)
+ __rte_mbuf_raw_free(md);
+ }
+ return m;
+ }
+ return NULL;
+}
+
+/**
+ * Free a segment of a packet mbuf into its original mempool.
+ *
+ * Free an mbuf, without parsing other segments in case of chained
+ * buffers.
+ *
+ * @param m
+ * The packet mbuf segment to be freed.
+ */
+static inline void __attribute__((always_inline))
+rte_pktmbuf_free_seg(struct rte_mbuf *m)
+{
+ if (likely(NULL != (m = __rte_pktmbuf_prefree_seg(m)))) {
+ m->next = NULL;
+ __rte_mbuf_raw_free(m);
+ }
+}
+
+/**
+ * Free a packet mbuf back into its original mempool.
+ *
+ * Free an mbuf, and all its segments in case of chained buffers. Each
+ * segment is added back into its original mempool.
+ *
+ * @param m
+ * The packet mbuf to be freed.
+ */
+static inline void rte_pktmbuf_free(struct rte_mbuf *m)
+{
+ struct rte_mbuf *m_next;
+
+ __rte_mbuf_sanity_check(m, 1);
+
+ while (m != NULL) {
+ m_next = m->next;
+ rte_pktmbuf_free_seg(m);
+ m = m_next;
+ }
+}
+
+/**
+ * Creates a "clone" of the given packet mbuf.
+ *
+ * Walks through all segments of the given packet mbuf, and for each of them:
+ * - Creates a new packet mbuf from the given pool.
+ * - Attaches newly created mbuf to the segment.
+ * Then updates pkt_len and nb_segs of the "clone" packet mbuf to match values
+ * from the original packet mbuf.
+ *
+ * @param md
+ * The packet mbuf to be cloned.
+ * @param mp
+ * The mempool from which the "clone" mbufs are allocated.
+ * @return
+ * - The pointer to the new "clone" mbuf on success.
+ * - NULL if allocation fails.
+ */
+static inline struct rte_mbuf *rte_pktmbuf_clone(struct rte_mbuf *md,
+ struct rte_mempool *mp)
+{
+ struct rte_mbuf *mc, *mi, **prev;
+ uint32_t pktlen;
+ uint8_t nseg;
+
+ if (unlikely ((mc = rte_pktmbuf_alloc(mp)) == NULL))
+ return NULL;
+
+ mi = mc;
+ prev = &mi->next;
+ pktlen = md->pkt_len;
+ nseg = 0;
+
+ do {
+ nseg++;
+ rte_pktmbuf_attach(mi, md);
+ *prev = mi;
+ prev = &mi->next;
+ } while ((md = md->next) != NULL &&
+ (mi = rte_pktmbuf_alloc(mp)) != NULL);
+
+ *prev = NULL;
+ mc->nb_segs = nseg;
+ mc->pkt_len = pktlen;
+
+ /* Allocation of new indirect segment failed */
+ if (unlikely (mi == NULL)) {
+ rte_pktmbuf_free(mc);
+ return NULL;
+ }
+
+ __rte_mbuf_sanity_check(mc, 1);
+ return mc;
+}
+
+/**
+ * Adds given value to the refcnt of all packet mbuf segments.
+ *
+ * Walks through all segments of given packet mbuf and for each of them
+ * invokes rte_mbuf_refcnt_update().
+ *
+ * @param m
+ * The packet mbuf whose refcnt to be updated.
+ * @param v
+ * The value to add to the mbuf's segments refcnt.
+ */
+static inline void rte_pktmbuf_refcnt_update(struct rte_mbuf *m, int16_t v)
+{
+ __rte_mbuf_sanity_check(m, 1);
+
+ do {
+ rte_mbuf_refcnt_update(m, v);
+ } while ((m = m->next) != NULL);
+}
+
+/**
+ * Get the headroom in a packet mbuf.
+ *
+ * @param m
+ * The packet mbuf.
+ * @return
+ * The length of the headroom.
+ */
+static inline uint16_t rte_pktmbuf_headroom(const struct rte_mbuf *m)
+{
+ __rte_mbuf_sanity_check(m, 1);
+ return m->data_off;
+}
+
+/**
+ * Get the tailroom of a packet mbuf.
+ *
+ * @param m
+ * The packet mbuf.
+ * @return
+ * The length of the tailroom.
+ */
+static inline uint16_t rte_pktmbuf_tailroom(const struct rte_mbuf *m)
+{
+ __rte_mbuf_sanity_check(m, 1);
+ return (uint16_t)(m->buf_len - rte_pktmbuf_headroom(m) -
+ m->data_len);
+}
+
+/**
+ * Get the last segment of the packet.
+ *
+ * @param m
+ * The packet mbuf.
+ * @return
+ * The last segment of the given mbuf.
+ */
+static inline struct rte_mbuf *rte_pktmbuf_lastseg(struct rte_mbuf *m)
+{
+ struct rte_mbuf *m2 = (struct rte_mbuf *)m;
+
+ __rte_mbuf_sanity_check(m, 1);
+ while (m2->next != NULL)
+ m2 = m2->next;
+ return m2;
+}
+
+/**
+ * A macro that points to an offset into the data in the mbuf.
+ *
+ * The returned pointer is cast to type t. Before using this
+ * function, the user must ensure that the first segment is large
+ * enough to accommodate its data.
+ *
+ * @param m
+ * The packet mbuf.
+ * @param o
+ * The offset into the mbuf data.
+ * @param t
+ * The type to cast the result into.
+ */
+#define rte_pktmbuf_mtod_offset(m, t, o) \
+ ((t)((char *)(m)->buf_addr + (m)->data_off + (o)))
+
+/**
+ * A macro that points to the start of the data in the mbuf.
+ *
+ * The returned pointer is cast to type t. Before using this
+ * function, the user must ensure that the first segment is large
+ * enough to accommodate its data.
+ *
+ * @param m
+ * The packet mbuf.
+ * @param t
+ * The type to cast the result into.
+ */
+#define rte_pktmbuf_mtod(m, t) rte_pktmbuf_mtod_offset(m, t, 0)
+
+/**
+ * A macro that returns the physical address that points to an offset of the
+ * start of the data in the mbuf
+ *
+ * @param m
+ * The packet mbuf.
+ * @param o
+ * The offset into the data to calculate address from.
+ */
+#define rte_pktmbuf_mtophys_offset(m, o) \
+ (phys_addr_t)((m)->buf_physaddr + (m)->data_off + (o))
+
+/**
+ * A macro that returns the physical address that points to the start of the
+ * data in the mbuf
+ *
+ * @param m
+ * The packet mbuf.
+ */
+#define rte_pktmbuf_mtophys(m) rte_pktmbuf_mtophys_offset(m, 0)
+
+/**
+ * A macro that returns the length of the packet.
+ *
+ * The value can be read or assigned.
+ *
+ * @param m
+ * The packet mbuf.
+ */
+#define rte_pktmbuf_pkt_len(m) ((m)->pkt_len)
+
+/**
+ * A macro that returns the length of the segment.
+ *
+ * The value can be read or assigned.
+ *
+ * @param m
+ * The packet mbuf.
+ */
+#define rte_pktmbuf_data_len(m) ((m)->data_len)
+
+/**
+ * Prepend len bytes to an mbuf data area.
+ *
+ * Returns a pointer to the new
+ * data start address. If there is not enough headroom in the first
+ * segment, the function will return NULL, without modifying the mbuf.
+ *
+ * @param m
+ * The pkt mbuf.
+ * @param len
+ * The amount of data to prepend (in bytes).
+ * @return
+ * A pointer to the start of the newly prepended data, or
+ * NULL if there is not enough headroom space in the first segment
+ */
+static inline char *rte_pktmbuf_prepend(struct rte_mbuf *m,
+ uint16_t len)
+{
+ __rte_mbuf_sanity_check(m, 1);
+
+ if (unlikely(len > rte_pktmbuf_headroom(m)))
+ return NULL;
+
+ m->data_off -= len;
+ m->data_len = (uint16_t)(m->data_len + len);
+ m->pkt_len = (m->pkt_len + len);
+
+ return (char *)m->buf_addr + m->data_off;
+}
+
+/**
+ * Append len bytes to an mbuf.
+ *
+ * Append len bytes to an mbuf and return a pointer to the start address
+ * of the added data. If there is not enough tailroom in the last
+ * segment, the function will return NULL, without modifying the mbuf.
+ *
+ * @param m
+ * The packet mbuf.
+ * @param len
+ * The amount of data to append (in bytes).
+ * @return
+ * A pointer to the start of the newly appended data, or
+ * NULL if there is not enough tailroom space in the last segment
+ */
+static inline char *rte_pktmbuf_append(struct rte_mbuf *m, uint16_t len)
+{
+ void *tail;
+ struct rte_mbuf *m_last;
+
+ __rte_mbuf_sanity_check(m, 1);
+
+ m_last = rte_pktmbuf_lastseg(m);
+ if (unlikely(len > rte_pktmbuf_tailroom(m_last)))
+ return NULL;
+
+ tail = (char *)m_last->buf_addr + m_last->data_off + m_last->data_len;
+ m_last->data_len = (uint16_t)(m_last->data_len + len);
+ m->pkt_len = (m->pkt_len + len);
+ return (char*) tail;
+}
+
+/**
+ * Remove len bytes at the beginning of an mbuf.
+ *
+ * Returns a pointer to the start address of the new data area. If the
+ * length is greater than the length of the first segment, then the
+ * function will fail and return NULL, without modifying the mbuf.
+ *
+ * @param m
+ * The packet mbuf.
+ * @param len
+ * The amount of data to remove (in bytes).
+ * @return
+ * A pointer to the new start of the data.
+ */
+static inline char *rte_pktmbuf_adj(struct rte_mbuf *m, uint16_t len)
+{
+ __rte_mbuf_sanity_check(m, 1);
+
+ if (unlikely(len > m->data_len))
+ return NULL;
+
+ m->data_len = (uint16_t)(m->data_len - len);
+ m->data_off += len;
+ m->pkt_len = (m->pkt_len - len);
+ return (char *)m->buf_addr + m->data_off;
+}
+
+/**
+ * Remove len bytes of data at the end of the mbuf.
+ *
+ * If the length is greater than the length of the last segment, the
+ * function will fail and return -1 without modifying the mbuf.
+ *
+ * @param m
+ * The packet mbuf.
+ * @param len
+ * The amount of data to remove (in bytes).
+ * @return
+ * - 0: On success.
+ * - -1: On error.
+ */
+static inline int rte_pktmbuf_trim(struct rte_mbuf *m, uint16_t len)
+{
+ struct rte_mbuf *m_last;
+
+ __rte_mbuf_sanity_check(m, 1);
+
+ m_last = rte_pktmbuf_lastseg(m);
+ if (unlikely(len > m_last->data_len))
+ return -1;
+
+ m_last->data_len = (uint16_t)(m_last->data_len - len);
+ m->pkt_len = (m->pkt_len - len);
+ return 0;
+}
+
+/**
+ * Test if mbuf data is contiguous.
+ *
+ * @param m
+ * The packet mbuf.
+ * @return
+ * - 1, if all data is contiguous (one segment).
+ * - 0, if there is several segments.
+ */
+static inline int rte_pktmbuf_is_contiguous(const struct rte_mbuf *m)
+{
+ __rte_mbuf_sanity_check(m, 1);
+ return !!(m->nb_segs == 1);
+}
+
+/**
+ * Chain an mbuf to another, thereby creating a segmented packet.
+ *
+ * Note: The implementation will do a linear walk over the segments to find
+ * the tail entry. For cases when there are many segments, it's better to
+ * chain the entries manually.
+ *
+ * @param head
+ * The head of the mbuf chain (the first packet)
+ * @param tail
+ * The mbuf to put last in the chain
+ *
+ * @return
+ * - 0, on success.
+ * - -EOVERFLOW, if the chain is full (256 entries)
+ */
+static inline int rte_pktmbuf_chain(struct rte_mbuf *head, struct rte_mbuf *tail)
+{
+ struct rte_mbuf *cur_tail;
+
+ /* Check for number-of-segments-overflow */
+ if (head->nb_segs + tail->nb_segs >= 1 << (sizeof(head->nb_segs) * 8))
+ return -EOVERFLOW;
+
+ /* Chain 'tail' onto the old tail */
+ cur_tail = rte_pktmbuf_lastseg(head);
+ cur_tail->next = tail;
+
+ /* accumulate number of segments and total length. */
+ head->nb_segs = (uint8_t)(head->nb_segs + tail->nb_segs);
+ head->pkt_len += tail->pkt_len;
+
+ /* pkt_len is only set in the head */
+ tail->pkt_len = tail->data_len;
+
+ return 0;
+}
+
+/**
+ * Dump an mbuf structure to the console.
+ *
+ * Dump all fields for the given packet mbuf and all its associated
+ * segments (in the case of a chained buffer).
+ *
+ * @param f
+ * A pointer to a file for output
+ * @param m
+ * The packet mbuf.
+ * @param dump_len
+ * If dump_len != 0, also dump the "dump_len" first data bytes of
+ * the packet.
+ */
+void rte_pktmbuf_dump(FILE *f, const struct rte_mbuf *m, unsigned dump_len);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_MBUF_H_ */
diff --git a/lib/librte_mbuf/rte_mbuf_version.map b/lib/librte_mbuf/rte_mbuf_version.map
new file mode 100644
index 00000000..e10f6bdc
--- /dev/null
+++ b/lib/librte_mbuf/rte_mbuf_version.map
@@ -0,0 +1,20 @@
+DPDK_2.0 {
+ global:
+
+ rte_ctrlmbuf_init;
+ rte_get_rx_ol_flag_name;
+ rte_get_tx_ol_flag_name;
+ rte_mbuf_sanity_check;
+ rte_pktmbuf_dump;
+ rte_pktmbuf_init;
+ rte_pktmbuf_pool_init;
+
+ local: *;
+};
+
+DPDK_2.1 {
+ global:
+
+ rte_pktmbuf_pool_create;
+
+} DPDK_2.0;