New upstream version 18.02upstream/18.02

Change-Id: I89ed24cb2a49b78fe5be6970b99dd46c1499fcc3
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>

1 files changed, 22 insertions, 218 deletions

diff --git a/lib/librte_ring/rte_ring.h b/lib/librte_ring/rte_ring.h
index e9244381..253cdc96 100644
--- a/lib/librte_ring/rte_ring.h
+++ b/lib/librte_ring/rte_ring.h
@@ -1,67 +1,11 @@
-/*-
- *   BSD LICENSE
- *
- *   Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
- *   All rights reserved.
- *
- *   Redistribution and use in source and binary forms, with or without
- *   modification, are permitted provided that the following conditions
- *   are met:
- *
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in
- *       the documentation and/or other materials provided with the
- *       distribution.
- *     * Neither the name of Intel Corporation nor the names of its
- *       contributors may be used to endorse or promote products derived
- *       from this software without specific prior written permission.
- *
- *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/*
- * Derived from FreeBSD's bufring.h
- *
- **************************************************************************
+/* SPDX-License-Identifier: BSD-3-Clause
  *
+ * Copyright (c) 2010-2017 Intel Corporation
  * Copyright (c) 2007-2009 Kip Macy kmacy@freebsd.org
  * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- *    this list of conditions and the following disclaimer.
- *
- * 2. The name of Kip Macy nor the names of other
- *    contributors may be used to endorse or promote products derived from
- *    this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ***************************************************************************/
+ * Derived from FreeBSD's bufring.h
+ * Used as BSD-3 Licensed with permission from Kip Macy.
+ */
 
 #ifndef _RTE_RING_H_
 #define _RTE_RING_H_
@@ -96,6 +40,7 @@ extern "C" {
 #include <sys/queue.h>
 #include <errno.h>
 #include <rte_common.h>
+#include <rte_config.h>
 #include <rte_memory.h>
 #include <rte_lcore.h>
 #include <rte_atomic.h>
@@ -356,91 +301,20 @@ void rte_ring_dump(FILE *f, const struct rte_ring *r);
 	} \
 } while (0)
 
-static __rte_always_inline void
-update_tail(struct rte_ring_headtail *ht, uint32_t old_val, uint32_t new_val,
-		uint32_t single)
-{
-	/*
-	 * If there are other enqueues/dequeues in progress that preceded us,
-	 * we need to wait for them to complete
-	 */
-	if (!single)
-		while (unlikely(ht->tail != old_val))
-			rte_pause();
-
-	ht->tail = new_val;
-}
-
-/**
- * @internal This function updates the producer head for enqueue
- *
- * @param r
- *   A pointer to the ring structure
- * @param is_sp
- *   Indicates whether multi-producer path is needed or not
- * @param n
- *   The number of elements we will want to enqueue, i.e. how far should the
- *   head be moved
- * @param behavior
- *   RTE_RING_QUEUE_FIXED:    Enqueue a fixed number of items from a ring
- *   RTE_RING_QUEUE_VARIABLE: Enqueue as many items as possible from ring
- * @param old_head
- *   Returns head value as it was before the move, i.e. where enqueue starts
- * @param new_head
- *   Returns the current/new head value i.e. where enqueue finishes
- * @param free_entries
- *   Returns the amount of free space in the ring BEFORE head was moved
- * @return
- *   Actual number of objects enqueued.
- *   If behavior == RTE_RING_QUEUE_FIXED, this will be 0 or n only.
- */
-static __rte_always_inline unsigned int
-__rte_ring_move_prod_head(struct rte_ring *r, int is_sp,
-		unsigned int n, enum rte_ring_queue_behavior behavior,
-		uint32_t *old_head, uint32_t *new_head,
-		uint32_t *free_entries)
-{
-	const uint32_t capacity = r->capacity;
-	unsigned int max = n;
-	int success;
-
-	do {
-		/* Reset n to the initial burst count */
-		n = max;
-
-		*old_head = r->prod.head;
-
-		/* add rmb barrier to avoid load/load reorder in weak
-		 * memory model. It is noop on x86
-		 */
-		rte_smp_rmb();
-
-		const uint32_t cons_tail = r->cons.tail;
-		/*
-		 *  The subtraction is done between two unsigned 32bits value
-		 * (the result is always modulo 32 bits even if we have
-		 * *old_head > cons_tail). So 'free_entries' is always between 0
-		 * and capacity (which is < size).
-		 */
-		*free_entries = (capacity + cons_tail - *old_head);
-
-		/* check that we have enough room in ring */
-		if (unlikely(n > *free_entries))
-			n = (behavior == RTE_RING_QUEUE_FIXED) ?
-					0 : *free_entries;
-
-		if (n == 0)
-			return 0;
-
-		*new_head = *old_head + n;
-		if (is_sp)
-			r->prod.head = *new_head, success = 1;
-		else
-			success = rte_atomic32_cmpset(&r->prod.head,
-					*old_head, *new_head);
-	} while (unlikely(success == 0));
-	return n;
-}
+/* Between load and load. there might be cpu reorder in weak model
+ * (powerpc/arm).
+ * There are 2 choices for the users
+ * 1.use rmb() memory barrier
+ * 2.use one-direcion load_acquire/store_release barrier,defined by
+ * CONFIG_RTE_RING_USE_C11_MEM_MODEL=y
+ * It depends on performance test results.
+ * By default, move common functions to rte_ring_generic.h
+ */
+#ifdef RTE_RING_USE_C11_MEM_MODEL
+#include "rte_ring_c11_mem.h"
+#else
+#include "rte_ring_generic.h"
+#endif
 
 /**
  * @internal Enqueue several objects on the ring
@@ -476,9 +350,8 @@ __rte_ring_do_enqueue(struct rte_ring *r, void * const *obj_table,
 		goto end;
 
 	ENQUEUE_PTRS(r, &r[1], prod_head, obj_table, n, void *);
-	rte_smp_wmb();
 
-	update_tail(&r->prod, prod_head, prod_next, is_sp);
+	update_tail(&r->prod, prod_head, prod_next, is_sp, 1);
 end:
 	if (free_space != NULL)
 		*free_space = free_entries - n;
@@ -486,74 +359,6 @@ end:
 }
 
 /**
- * @internal This function updates the consumer head for dequeue
- *
- * @param r
- *   A pointer to the ring structure
- * @param is_sc
- *   Indicates whether multi-consumer path is needed or not
- * @param n
- *   The number of elements we will want to enqueue, i.e. how far should the
- *   head be moved
- * @param behavior
- *   RTE_RING_QUEUE_FIXED:    Dequeue a fixed number of items from a ring
- *   RTE_RING_QUEUE_VARIABLE: Dequeue as many items as possible from ring
- * @param old_head
- *   Returns head value as it was before the move, i.e. where dequeue starts
- * @param new_head
- *   Returns the current/new head value i.e. where dequeue finishes
- * @param entries
- *   Returns the number of entries in the ring BEFORE head was moved
- * @return
- *   - Actual number of objects dequeued.
- *     If behavior == RTE_RING_QUEUE_FIXED, this will be 0 or n only.
- */
-static __rte_always_inline unsigned int
-__rte_ring_move_cons_head(struct rte_ring *r, int is_sc,
-		unsigned int n, enum rte_ring_queue_behavior behavior,
-		uint32_t *old_head, uint32_t *new_head,
-		uint32_t *entries)
-{
-	unsigned int max = n;
-	int success;
-
-	/* move cons.head atomically */
-	do {
-		/* Restore n as it may change every loop */
-		n = max;
-
-		*old_head = r->cons.head;
-
-		/* add rmb barrier to avoid load/load reorder in weak
-		 * memory model. It is noop on x86
-		 */
-		rte_smp_rmb();
-
-		const uint32_t prod_tail = r->prod.tail;
-		/* The subtraction is done between two unsigned 32bits value
-		 * (the result is always modulo 32 bits even if we have
-		 * cons_head > prod_tail). So 'entries' is always between 0
-		 * and size(ring)-1. */
-		*entries = (prod_tail - *old_head);
-
-		/* Set the actual entries for dequeue */
-		if (n > *entries)
-			n = (behavior == RTE_RING_QUEUE_FIXED) ? 0 : *entries;
-
-		if (unlikely(n == 0))
-			return 0;
-
-		*new_head = *old_head + n;
-		if (is_sc)
-			r->cons.head = *new_head, success = 1;
-		else
-			success = rte_atomic32_cmpset(&r->cons.head, *old_head,
-					*new_head);
-	} while (unlikely(success == 0));
-	return n;
-}
-
-/**
  * @internal Dequeue several objects from the ring
  *
  * @param r
@@ -587,9 +392,8 @@ __rte_ring_do_dequeue(struct rte_ring *r, void **obj_table,
 		goto end;
 
 	DEQUEUE_PTRS(r, &r[1], cons_head, obj_table, n, void *);
-	rte_smp_rmb();
 
-	update_tail(&r->cons, cons_head, cons_next, is_sc);
+	update_tail(&r->cons, cons_head, cons_next, is_sc, 0);
 
 end:
 	if (available != NULL)