Imported Upstream version 16.04

Change-Id: I77eadcd8538a9122e4773cbe55b24033dc451757
Signed-off-by: C.J. Collier <cjcollier@linuxfoundation.org>

1 files changed, 293 insertions, 0 deletions

diff --git a/mk/rte.app.mk b/mk/rte.app.mk
new file mode 100644
index 00000000..c66e491d
--- /dev/null
+++ b/mk/rte.app.mk
@@ -0,0 +1,293 @@
+#   BSD LICENSE
+#
+#   Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
+#   Copyright(c) 2014-2015 6WIND S.A.
+#   All rights reserved.
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+#
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/internal/rte.compile-pre.mk
+include $(RTE_SDK)/mk/internal/rte.install-pre.mk
+include $(RTE_SDK)/mk/internal/rte.clean-pre.mk
+include $(RTE_SDK)/mk/internal/rte.build-pre.mk
+include $(RTE_SDK)/mk/internal/rte.depdirs-pre.mk
+
+# VPATH contains at least SRCDIR
+VPATH += $(SRCDIR)
+
+_BUILD = $(APP)
+_INSTALL = $(INSTALL-FILES-y) $(SYMLINK-FILES-y)
+_INSTALL += $(RTE_OUTPUT)/app/$(APP) $(RTE_OUTPUT)/app/$(APP).map
+POSTINSTALL += target-appinstall
+_CLEAN = doclean
+POSTCLEAN += target-appclean
+
+ifeq ($(NO_LDSCRIPT),)
+LDSCRIPT = $(RTE_LDSCRIPT)
+endif
+
+# default path for libs
+_LDLIBS-y += -L$(RTE_SDK_BIN)/lib
+
+#
+# Order is important: from higher level to lower level
+#
+
+_LDLIBS-y += --whole-archive
+
+_LDLIBS-$(CONFIG_RTE_LIBRTE_DISTRIBUTOR)    += -lrte_distributor
+_LDLIBS-$(CONFIG_RTE_LIBRTE_REORDER)        += -lrte_reorder
+
+ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
+_LDLIBS-$(CONFIG_RTE_LIBRTE_KNI)            += -lrte_kni
+_LDLIBS-$(CONFIG_RTE_LIBRTE_IVSHMEM)        += -lrte_ivshmem
+endif
+
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PIPELINE)       += -lrte_pipeline
+_LDLIBS-$(CONFIG_RTE_LIBRTE_TABLE)          += -lrte_table
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PORT)           += -lrte_port
+_LDLIBS-$(CONFIG_RTE_LIBRTE_TIMER)          += -lrte_timer
+_LDLIBS-$(CONFIG_RTE_LIBRTE_HASH)           += -lrte_hash
+_LDLIBS-$(CONFIG_RTE_LIBRTE_JOBSTATS)       += -lrte_jobstats
+_LDLIBS-$(CONFIG_RTE_LIBRTE_LPM)            += -lrte_lpm
+_LDLIBS-$(CONFIG_RTE_LIBRTE_POWER)          += -lrte_power
+_LDLIBS-$(CONFIG_RTE_LIBRTE_ACL)            += -lrte_acl
+_LDLIBS-$(CONFIG_RTE_LIBRTE_METER)          += -lrte_meter
+_LDLIBS-$(CONFIG_RTE_LIBRTE_SCHED)          += -lrte_sched
+_LDLIBS-$(CONFIG_RTE_LIBRTE_VHOST)          += -lrte_vhost
+
+# The static libraries do not know their dependencies.
+# So linking with static library requires explicit dependencies.
+ifeq ($(CONFIG_RTE_BUILD_SHARED_LIB),n)
+_LDLIBS-$(CONFIG_RTE_LIBRTE_SCHED)          += -lm
+_LDLIBS-$(CONFIG_RTE_LIBRTE_SCHED)          += -lrt
+_LDLIBS-$(CONFIG_RTE_LIBRTE_METER)          += -lm
+ifeq ($(CONFIG_RTE_LIBRTE_VHOST_NUMA),y)
+_LDLIBS-$(CONFIG_RTE_LIBRTE_VHOST)          += -lnuma
+endif
+ifeq ($(CONFIG_RTE_LIBRTE_VHOST_USER),n)
+_LDLIBS-$(CONFIG_RTE_LIBRTE_VHOST)          += -lfuse
+endif
+_LDLIBS-$(CONFIG_RTE_PORT_PCAP)             += -lpcap
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_PCAP)       += -lpcap
+_LDLIBS-$(CONFIG_RTE_LIBRTE_BNX2X_PMD)      += -lz
+_LDLIBS-$(CONFIG_RTE_LIBRTE_MLX4_PMD)       += -libverbs
+_LDLIBS-$(CONFIG_RTE_LIBRTE_MLX5_PMD)       += -libverbs
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_SZEDATA2)   += -lsze2
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_XENVIRT)    += -lxenstore
+_LDLIBS-$(CONFIG_RTE_LIBRTE_MPIPE_PMD)      += -lgxio
+_LDLIBS-$(CONFIG_RTE_LIBRTE_NFP_PMD)        += -lm
+# QAT / AESNI GCM PMDs are dependent on libcrypto (from openssl)
+# for calculating HMAC precomputes
+ifeq ($(CONFIG_RTE_LIBRTE_PMD_QAT),y)
+_LDLIBS-y                                   += -lcrypto
+else ifeq ($(CONFIG_RTE_LIBRTE_PMD_AESNI_GCM),y)
+_LDLIBS-y                                   += -lcrypto
+endif
+endif # !CONFIG_RTE_BUILD_SHARED_LIBS
+
+_LDLIBS-y += --start-group
+
+_LDLIBS-$(CONFIG_RTE_LIBRTE_KVARGS)         += -lrte_kvargs
+_LDLIBS-$(CONFIG_RTE_LIBRTE_MBUF)           += -lrte_mbuf
+_LDLIBS-$(CONFIG_RTE_LIBRTE_IP_FRAG)        += -lrte_ip_frag
+_LDLIBS-$(CONFIG_RTE_LIBRTE_ETHER)          += -lethdev
+_LDLIBS-$(CONFIG_RTE_LIBRTE_CRYPTODEV)      += -lrte_cryptodev
+_LDLIBS-$(CONFIG_RTE_LIBRTE_MEMPOOL)        += -lrte_mempool
+_LDLIBS-$(CONFIG_RTE_LIBRTE_RING)           += -lrte_ring
+_LDLIBS-$(CONFIG_RTE_LIBRTE_EAL)            += -lrte_eal
+_LDLIBS-$(CONFIG_RTE_LIBRTE_CMDLINE)        += -lrte_cmdline
+_LDLIBS-$(CONFIG_RTE_LIBRTE_CFGFILE)        += -lrte_cfgfile
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_BOND)       += -lrte_pmd_bond
+
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_XENVIRT)    += -lrte_pmd_xenvirt
+
+ifeq ($(CONFIG_RTE_BUILD_SHARED_LIB),n)
+# plugins (link only if static libraries)
+
+_LDLIBS-$(CONFIG_RTE_LIBRTE_VMXNET3_PMD)    += -lrte_pmd_vmxnet3_uio
+_LDLIBS-$(CONFIG_RTE_LIBRTE_VIRTIO_PMD)     += -lrte_pmd_virtio
+_LDLIBS-$(CONFIG_RTE_LIBRTE_BNX2X_PMD)      += -lrte_pmd_bnx2x
+_LDLIBS-$(CONFIG_RTE_LIBRTE_CXGBE_PMD)      += -lrte_pmd_cxgbe
+_LDLIBS-$(CONFIG_RTE_LIBRTE_ENIC_PMD)       += -lrte_pmd_enic
+_LDLIBS-$(CONFIG_RTE_LIBRTE_I40E_PMD)       += -lrte_pmd_i40e
+_LDLIBS-$(CONFIG_RTE_LIBRTE_FM10K_PMD)      += -lrte_pmd_fm10k
+_LDLIBS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD)      += -lrte_pmd_ixgbe
+_LDLIBS-$(CONFIG_RTE_LIBRTE_E1000_PMD)      += -lrte_pmd_e1000
+_LDLIBS-$(CONFIG_RTE_LIBRTE_ENA_PMD)        += -lrte_pmd_ena
+_LDLIBS-$(CONFIG_RTE_LIBRTE_MLX4_PMD)       += -lrte_pmd_mlx4
+_LDLIBS-$(CONFIG_RTE_LIBRTE_MLX5_PMD)       += -lrte_pmd_mlx5
+_LDLIBS-$(CONFIG_RTE_LIBRTE_NFP_PMD)        += -lrte_pmd_nfp
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_SZEDATA2)   += -lrte_pmd_szedata2
+_LDLIBS-$(CONFIG_RTE_LIBRTE_MPIPE_PMD)      += -lrte_pmd_mpipe
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_RING)       += -lrte_pmd_ring
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_PCAP)       += -lrte_pmd_pcap
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AF_PACKET)  += -lrte_pmd_af_packet
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_NULL)       += -lrte_pmd_null
+
+ifeq ($(CONFIG_RTE_LIBRTE_CRYPTODEV),y)
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_QAT)        += -lrte_pmd_qat
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_MB)   += -lrte_pmd_aesni_mb
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_GCM)   += -lrte_pmd_aesni_gcm
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO) += -lrte_pmd_null_crypto
+
+# AESNI MULTI BUFFER / GCM PMDs are dependent on the IPSec_MB library
+ifeq ($(CONFIG_RTE_LIBRTE_PMD_AESNI_MB),y)
+_LDLIBS-y += -L$(AESNI_MULTI_BUFFER_LIB_PATH) -lIPSec_MB
+else ifeq ($(CONFIG_RTE_LIBRTE_PMD_AESNI_GCM),y)
+_LDLIBS-y += -L$(AESNI_MULTI_BUFFER_LIB_PATH) -lIPSec_MB
+endif
+
+# SNOW3G PMD is dependent on the LIBSSO library
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_SNOW3G)     += -lrte_pmd_snow3g
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_SNOW3G)     += -L$(LIBSSO_PATH)/build -lsso
+endif # CONFIG_RTE_LIBRTE_CRYPTODEV
+
+ifeq ($(CONFIG_RTE_LIBRTE_VHOST),y)
+
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_VHOST)      += -lrte_pmd_vhost
+
+endif # $(CONFIG_RTE_LIBRTE_VHOST)
+
+endif # ! $(CONFIG_RTE_BUILD_SHARED_LIB)
+
+_LDLIBS-y += $(EXECENV_LDLIBS)
+_LDLIBS-y += --end-group
+_LDLIBS-y += --no-whole-archive
+
+LDLIBS += $(_LDLIBS-y) $(CPU_LDLIBS) $(EXTRA_LDLIBS)
+
+# Eliminate duplicates without sorting
+LDLIBS := $(shell echo $(LDLIBS) | \
+	awk '{for (i = 1; i <= NF; i++) { if (!seen[$$i]++) print $$i }}')
+
+.PHONY: all
+all: install
+
+.PHONY: install
+install: build _postinstall
+
+_postinstall: build
+
+.PHONY: build
+build: _postbuild
+
+exe2cmd = $(strip $(call dotfile,$(patsubst %,%.cmd,$(1))))
+
+ifeq ($(LINK_USING_CC),1)
+override EXTRA_LDFLAGS := $(call linkerprefix,$(EXTRA_LDFLAGS))
+O_TO_EXE = $(CC) $(CFLAGS) $(LDFLAGS_$(@)) \
+	-Wl,-Map=$(@).map,--cref -o $@ $(OBJS-y) $(call linkerprefix,$(LDFLAGS)) \
+	$(EXTRA_LDFLAGS) $(call linkerprefix,$(LDLIBS))
+else
+O_TO_EXE = $(LD) $(LDFLAGS) $(LDFLAGS_$(@)) $(EXTRA_LDFLAGS) \
+	-Map=$(@).map --cref -o $@ $(OBJS-y) $(LDLIBS)
+endif
+O_TO_EXE_STR = $(subst ','\'',$(O_TO_EXE)) #'# fix syntax highlight
+O_TO_EXE_DISP = $(if $(V),"$(O_TO_EXE_STR)","  LD $(@)")
+O_TO_EXE_CMD = "cmd_$@ = $(O_TO_EXE_STR)"
+O_TO_EXE_DO = @set -e; \
+	echo $(O_TO_EXE_DISP); \
+	$(O_TO_EXE) && \
+	echo $(O_TO_EXE_CMD) > $(call exe2cmd,$(@))
+
+-include .$(APP).cmd
+
+# path where libraries are retrieved
+LDLIBS_PATH := $(subst -Wl$(comma)-L,,$(filter -Wl$(comma)-L%,$(LDLIBS)))
+LDLIBS_PATH += $(subst -L,,$(filter -L%,$(LDLIBS)))
+
+# list of .a files that are linked to this application
+LDLIBS_NAMES := $(patsubst -l%,lib%.a,$(filter -l%,$(LDLIBS)))
+LDLIBS_NAMES += $(patsubst -Wl$(comma)-l%,lib%.a,$(filter -Wl$(comma)-l%,$(LDLIBS)))
+
+# list of found libraries files (useful for deps). If not found, the
+# library is silently ignored and dep won't be checked
+LDLIBS_FILES := $(wildcard $(foreach dir,$(LDLIBS_PATH),\
+	$(addprefix $(dir)/,$(LDLIBS_NAMES))))
+
+#
+# Compile executable file if needed
+#
+$(APP): $(OBJS-y) $(LDLIBS_FILES) $(DEP_$(APP)) $(LDSCRIPT) FORCE
+	@[ -d $(dir $@) ] || mkdir -p $(dir $@)
+	$(if $(D),\
+		@echo -n "$< -> $@ " ; \
+		echo -n "file_missing=$(call boolean,$(file_missing)) " ; \
+		echo -n "cmdline_changed=$(call boolean,$(call cmdline_changed,$(O_TO_EXE_STR))) " ; \
+		echo -n "depfile_missing=$(call boolean,$(depfile_missing)) " ; \
+		echo "depfile_newer=$(call boolean,$(depfile_newer)) ")
+	$(if $(or \
+		$(file_missing),\
+		$(call cmdline_changed,$(O_TO_EXE_STR)),\
+		$(depfile_missing),\
+		$(depfile_newer)),\
+		$(O_TO_EXE_DO))
+
+#
+# install app in $(RTE_OUTPUT)/app
+#
+$(RTE_OUTPUT)/app/$(APP): $(APP)
+	@echo "  INSTALL-APP $(APP)"
+	@[ -d $(RTE_OUTPUT)/app ] || mkdir -p $(RTE_OUTPUT)/app
+	$(Q)cp -f $(APP) $(RTE_OUTPUT)/app
+
+#
+# install app map file in $(RTE_OUTPUT)/app
+#
+$(RTE_OUTPUT)/app/$(APP).map: $(APP)
+	@echo "  INSTALL-MAP $(APP).map"
+	@[ -d $(RTE_OUTPUT)/app ] || mkdir -p $(RTE_OUTPUT)/app
+	$(Q)cp -f $(APP).map $(RTE_OUTPUT)/app
+
+#
+# Clean all generated files
+#
+.PHONY: clean
+clean: _postclean
+	$(Q)rm -f $(_BUILD_TARGETS) $(_INSTALL_TARGETS) $(_CLEAN_TARGETS)
+
+.PHONY: doclean
+doclean:
+	$(Q)rm -rf $(APP) $(OBJS-all) $(DEPS-all) $(DEPSTMP-all) \
+	  $(CMDS-all) $(INSTALL-FILES-all) .$(APP).cmd
+
+
+include $(RTE_SDK)/mk/internal/rte.compile-post.mk
+include $(RTE_SDK)/mk/internal/rte.install-post.mk
+include $(RTE_SDK)/mk/internal/rte.clean-post.mk
+include $(RTE_SDK)/mk/internal/rte.build-post.mk
+include $(RTE_SDK)/mk/internal/rte.depdirs-post.mk
+
+ifneq ($(wildcard $(RTE_SDK)/mk/target/$(RTE_TARGET)/rte.app.mk),)
+include $(RTE_SDK)/mk/target/$(RTE_TARGET)/rte.app.mk
+else
+include $(RTE_SDK)/mk/target/generic/rte.app.mk
+endif
+
+.PHONY: FORCE
+FORCE: