diff options
Diffstat (limited to 'app/test-pipeline/pipeline_lpm_ipv6.c')
-rw-r--r-- | app/test-pipeline/pipeline_lpm_ipv6.c | 200 |
1 files changed, 200 insertions, 0 deletions
diff --git a/app/test-pipeline/pipeline_lpm_ipv6.c b/app/test-pipeline/pipeline_lpm_ipv6.c new file mode 100644 index 00000000..3352e89d --- /dev/null +++ b/app/test-pipeline/pipeline_lpm_ipv6.c @@ -0,0 +1,200 @@ +/*- + * BSD LICENSE + * + * Copyright(c) 2010-2016 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <stdio.h> +#include <stdlib.h> +#include <stdint.h> + +#include <rte_log.h> +#include <rte_ethdev.h> +#include <rte_ether.h> +#include <rte_ip.h> +#include <rte_byteorder.h> + +#include <rte_port_ring.h> +#include <rte_table_lpm_ipv6.h> +#include <rte_pipeline.h> + +#include "main.h" + +void +app_main_loop_worker_pipeline_lpm_ipv6(void) { + struct rte_pipeline_params pipeline_params = { + .name = "pipeline", + .socket_id = rte_socket_id(), + }; + + struct rte_pipeline *p; + uint32_t port_in_id[APP_MAX_PORTS]; + uint32_t port_out_id[APP_MAX_PORTS]; + uint32_t table_id; + uint32_t i; + + RTE_LOG(INFO, USER1, + "Core %u is doing work (pipeline with IPv6 LPM table)\n", + rte_lcore_id()); + + /* Pipeline configuration */ + p = rte_pipeline_create(&pipeline_params); + if (p == NULL) + rte_panic("Unable to configure the pipeline\n"); + + /* Input port configuration */ + for (i = 0; i < app.n_ports; i++) { + struct rte_port_ring_reader_params port_ring_params = { + .ring = app.rings_rx[i], + }; + + struct rte_pipeline_port_in_params port_params = { + .ops = &rte_port_ring_reader_ops, + .arg_create = (void *) &port_ring_params, + .f_action = NULL, + .arg_ah = NULL, + .burst_size = app.burst_size_worker_read, + }; + + if (rte_pipeline_port_in_create(p, &port_params, + &port_in_id[i])) + rte_panic("Unable to configure input port for " + "ring %d\n", i); + } + + /* Output port configuration */ + for (i = 0; i < app.n_ports; i++) { + struct rte_port_ring_writer_params port_ring_params = { + .ring = app.rings_tx[i], + .tx_burst_sz = app.burst_size_worker_write, + }; + + struct rte_pipeline_port_out_params port_params = { + .ops = &rte_port_ring_writer_ops, + .arg_create = (void *) &port_ring_params, + .f_action = NULL, + .arg_ah = NULL, + }; + + if (rte_pipeline_port_out_create(p, &port_params, + &port_out_id[i])) + rte_panic("Unable to configure output port for " + "ring %d\n", i); + } + + /* Table configuration */ + { + struct rte_table_lpm_ipv6_params table_lpm_ipv6_params = { + .name = "LPM", + .n_rules = 1 << 24, + .number_tbl8s = 1 << 21, + .entry_unique_size = + sizeof(struct rte_pipeline_table_entry), + .offset = APP_METADATA_OFFSET(32), + }; + + struct rte_pipeline_table_params table_params = { + .ops = &rte_table_lpm_ipv6_ops, + .arg_create = &table_lpm_ipv6_params, + .f_action_hit = NULL, + .f_action_miss = NULL, + .arg_ah = NULL, + .action_data_size = 0, + }; + + if (rte_pipeline_table_create(p, &table_params, &table_id)) + rte_panic("Unable to configure the IPv6 LPM table\n"); + } + + /* Interconnecting ports and tables */ + for (i = 0; i < app.n_ports; i++) + if (rte_pipeline_port_in_connect_to_table(p, port_in_id[i], + table_id)) + rte_panic("Unable to connect input port %u to " + "table %u\n", port_in_id[i], table_id); + + /* Add entries to tables */ + for (i = 0; i < app.n_ports; i++) { + struct rte_pipeline_table_entry entry = { + .action = RTE_PIPELINE_ACTION_PORT, + {.port_id = port_out_id[i & (app.n_ports - 1)]}, + }; + + struct rte_table_lpm_ipv6_key key; + struct rte_pipeline_table_entry *entry_ptr; + uint32_t ip; + int key_found, status; + + key.depth = 8 + __builtin_popcount(app.n_ports - 1); + + ip = rte_bswap32(i << (24 - + __builtin_popcount(app.n_ports - 1))); + memcpy(key.ip, &ip, sizeof(uint32_t)); + + printf("Adding rule to IPv6 LPM table (IPv6 destination = " + "%.2x%.2x:%.2x%.2x:%.2x%.2x:%.2x%.2x:" + "%.2x%.2x:%.2x%.2x:%.2x%.2x:%.2x%.2x/%u => " + "port out = %u)\n", + key.ip[0], key.ip[1], key.ip[2], key.ip[3], + key.ip[4], key.ip[5], key.ip[6], key.ip[7], + key.ip[8], key.ip[9], key.ip[10], key.ip[11], + key.ip[12], key.ip[13], key.ip[14], key.ip[15], + key.depth, i); + + status = rte_pipeline_table_entry_add(p, table_id, &key, &entry, + &key_found, &entry_ptr); + if (status < 0) + rte_panic("Unable to add entry to table %u (%d)\n", + table_id, status); + } + + /* Enable input ports */ + for (i = 0; i < app.n_ports; i++) + if (rte_pipeline_port_in_enable(p, port_in_id[i])) + rte_panic("Unable to enable input port %u\n", + port_in_id[i]); + + /* Check pipeline consistency */ + if (rte_pipeline_check(p) < 0) + rte_panic("Pipeline consistency check failed\n"); + + /* Run-time */ +#if APP_FLUSH == 0 + for ( ; ; ) + rte_pipeline_run(p); +#else + for (i = 0; ; i++) { + rte_pipeline_run(p); + + if ((i & APP_FLUSH) == 0) + rte_pipeline_flush(p); + } +#endif +} |