diff options
Diffstat (limited to 'app/test-pmd/parameters.c')
| -rw-r--r-- | app/test-pmd/parameters.c | 86 |
1 files changed, 65 insertions, 21 deletions
diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c index 97d22b86..962fad78 100644 --- a/app/test-pmd/parameters.c +++ b/app/test-pmd/parameters.c @@ -70,7 +70,7 @@ usage(char* progname) "--rss-ip | --rss-udp | " "--rxpt= | --rxht= | --rxwt= | --rxfreet= | " "--txpt= | --txht= | --txwt= | --txfreet= | " - "--txrst= | --tx-offloads ]\n", + "--txrst= | --tx-offloads= | --vxlan-gpe-port= ]\n", progname); #ifdef RTE_LIBRTE_CMDLINE printf(" --interactive: run in interactive mode.\n"); @@ -186,6 +186,10 @@ usage(char* progname) printf(" --flow-isolate-all: " "requests flow API isolated mode on all ports at initialization time.\n"); printf(" --tx-offloads=0xXXXXXXXX: hexadecimal bitmask of TX queue offloads\n"); + printf(" --hot-plug: enable hot plug for device.\n"); + printf(" --vxlan-gpe-port=N: UPD port of tunnel VXLAN-GPE\n"); + printf(" --mlockall: lock all memory\n"); + printf(" --no-mlockall: do not lock all memory\n"); } #ifdef RTE_LIBRTE_CMDLINE @@ -373,7 +377,6 @@ parse_portnuma_config(const char *q_arg) }; unsigned long int_fld[_NUM_FLD]; char *str_fld[_NUM_FLD]; - portid_t pid; /* reset from value set at definition */ while ((p = strchr(p0,'(')) != NULL) { @@ -397,10 +400,7 @@ parse_portnuma_config(const char *q_arg) port_id = (portid_t)int_fld[FLD_PORT]; if (port_id_is_invalid(port_id, ENABLED_WARN) || port_id == (portid_t)RTE_PORT_ALL) { - printf("Valid port range is [0"); - RTE_ETH_FOREACH_DEV(pid) - printf(", %d", pid); - printf("]\n"); + print_valid_ports(); return -1; } socket_id = (uint8_t)int_fld[FLD_SOCKET]; @@ -431,7 +431,6 @@ parse_ringnuma_config(const char *q_arg) }; unsigned long int_fld[_NUM_FLD]; char *str_fld[_NUM_FLD]; - portid_t pid; #define RX_RING_ONLY 0x1 #define TX_RING_ONLY 0x2 #define RXTX_RING 0x3 @@ -458,10 +457,7 @@ parse_ringnuma_config(const char *q_arg) port_id = (portid_t)int_fld[FLD_PORT]; if (port_id_is_invalid(port_id, ENABLED_WARN) || port_id == (portid_t)RTE_PORT_ALL) { - printf("Valid port range is [0"); - RTE_ETH_FOREACH_DEV(pid) - printf(", %d", pid); - printf("]\n"); + print_valid_ports(); return -1; } socket_id = (uint8_t)int_fld[FLD_SOCKET]; @@ -512,6 +508,8 @@ parse_event_printing_config(const char *optarg, int enable) mask = UINT32_C(1) << RTE_ETH_EVENT_INTR_RESET; else if (!strcmp(optarg, "vf_mbox")) mask = UINT32_C(1) << RTE_ETH_EVENT_VF_MBOX; + else if (!strcmp(optarg, "ipsec")) + mask = UINT32_C(1) << RTE_ETH_EVENT_IPSEC; else if (!strcmp(optarg, "macsec")) mask = UINT32_C(1) << RTE_ETH_EVENT_MACSEC; else if (!strcmp(optarg, "intr_rmv")) @@ -544,6 +542,8 @@ launch_args_parse(int argc, char** argv) /* Default offloads for all ports. */ uint64_t rx_offloads = rx_mode.offloads; uint64_t tx_offloads = tx_mode.offloads; + struct rte_eth_dev_info dev_info; + uint16_t rec_nb_pkts; static struct option lgopts[] = { { "help", 0, 0, 0 }, @@ -621,6 +621,10 @@ launch_args_parse(int argc, char** argv) { "print-event", 1, 0, 0 }, { "mask-event", 1, 0, 0 }, { "tx-offloads", 1, 0, 0 }, + { "hot-plug", 0, 0, 0 }, + { "vxlan-gpe-port", 1, 0, 0 }, + { "mlockall", 0, 0, 0 }, + { "no-mlockall", 0, 0, 0 }, { 0, 0, 0, 0 }, }; @@ -658,9 +662,8 @@ launch_args_parse(int argc, char** argv) if (!strcmp(lgopts[opt_idx].name, "cmdline-file")) { printf("CLI commands to be read from %s\n", optarg); - snprintf(cmdline_filename, - sizeof(cmdline_filename), "%s", - optarg); + strlcpy(cmdline_filename, optarg, + sizeof(cmdline_filename)); } if (!strcmp(lgopts[opt_idx].name, "auto-start")) { printf("Auto-start selected\n"); @@ -875,8 +878,10 @@ launch_args_parse(int argc, char** argv) " must be >= 0\n", n); } #endif - if (!strcmp(lgopts[opt_idx].name, "disable-crc-strip")) + if (!strcmp(lgopts[opt_idx].name, "disable-crc-strip")) { rx_offloads &= ~DEV_RX_OFFLOAD_CRC_STRIP; + rx_offloads |= DEV_RX_OFFLOAD_KEEP_CRC; + } if (!strcmp(lgopts[opt_idx].name, "enable-lro")) rx_offloads |= DEV_RX_OFFLOAD_TCP_LRO; if (!strcmp(lgopts[opt_idx].name, "enable-scatter")) @@ -948,12 +953,38 @@ launch_args_parse(int argc, char** argv) } if (!strcmp(lgopts[opt_idx].name, "burst")) { n = atoi(optarg); - if ((n >= 1) && (n <= MAX_PKT_BURST)) - nb_pkt_per_burst = (uint16_t) n; - else + if (n == 0) { + /* A burst size of zero means that the + * PMD should be queried for + * recommended Rx burst size. Since + * testpmd uses a single size for all + * ports, port 0 is queried for the + * value, on the assumption that all + * ports are of the same NIC model. + */ + rte_eth_dev_info_get(0, &dev_info); + rec_nb_pkts = dev_info + .default_rxportconf.burst_size; + + if (rec_nb_pkts == 0) + rte_exit(EXIT_FAILURE, + "PMD does not recommend a burst size. " + "Provided value must be between " + "1 and %d\n", MAX_PKT_BURST); + else if (rec_nb_pkts > MAX_PKT_BURST) + rte_exit(EXIT_FAILURE, + "PMD recommended burst size of %d" + " exceeds maximum value of %d\n", + rec_nb_pkts, MAX_PKT_BURST); + printf("Using PMD-provided burst value of %d\n", + rec_nb_pkts); + nb_pkt_per_burst = rec_nb_pkts; + } else if (n > MAX_PKT_BURST) rte_exit(EXIT_FAILURE, - "burst must >= 1 and <= %d]", - MAX_PKT_BURST); + "burst must be between1 and %d\n", + MAX_PKT_BURST); + else + nb_pkt_per_burst = (uint16_t) n; } if (!strcmp(lgopts[opt_idx].name, "mbcache")) { n = atoi(optarg); @@ -1092,6 +1123,14 @@ launch_args_parse(int argc, char** argv) rte_exit(EXIT_FAILURE, "tx-offloads must be >= 0\n"); } + if (!strcmp(lgopts[opt_idx].name, "vxlan-gpe-port")) { + n = atoi(optarg); + if (n >= 0) + vxlan_gpe_udp_port = (uint16_t)n; + else + rte_exit(EXIT_FAILURE, + "vxlan-gpe-port must be >= 0\n"); + } if (!strcmp(lgopts[opt_idx].name, "print-event")) if (parse_event_printing_config(optarg, 1)) { rte_exit(EXIT_FAILURE, @@ -1102,7 +1141,12 @@ launch_args_parse(int argc, char** argv) rte_exit(EXIT_FAILURE, "invalid mask-event argument\n"); } - + if (!strcmp(lgopts[opt_idx].name, "hot-plug")) + hot_plug = 1; + if (!strcmp(lgopts[opt_idx].name, "mlockall")) + do_mlockall = 1; + if (!strcmp(lgopts[opt_idx].name, "no-mlockall")) + do_mlockall = 0; break; case 'h': usage(argv[0]); |