diff options
Diffstat (limited to 'config/common_base')
| -rw-r--r-- | config/common_base | 551 |
1 files changed, 551 insertions, 0 deletions
diff --git a/config/common_base b/config/common_base new file mode 100644 index 00000000..0124e86c --- /dev/null +++ b/config/common_base @@ -0,0 +1,551 @@ +# BSD LICENSE +# +# Copyright(c) 2010-2016 Intel Corporation. All rights reserved. +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# * Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# * Neither the name of Intel Corporation nor the names of its +# contributors may be used to endorse or promote products derived +# from this software without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# + +# +# define executive environment +# RTE_EXEC_ENV values are the directories in mk/exec-env/ +# +CONFIG_RTE_EXEC_ENV= + +# +# define the architecture we compile for. +# RTE_ARCH values are the directories in mk/arch/ +# +CONFIG_RTE_ARCH= + +# +# machine can define specific variables or action for a specific board +# RTE_MACHINE values are the directories in mk/machine/ +# +CONFIG_RTE_MACHINE= + +# +# The compiler we use. +# RTE_TOOLCHAIN values are the directories in mk/toolchain/ +# +CONFIG_RTE_TOOLCHAIN= + +# +# Use intrinsics or assembly code for key routines +# +CONFIG_RTE_FORCE_INTRINSICS=n + +# +# Machine forces strict alignment constraints. +# +CONFIG_RTE_ARCH_STRICT_ALIGN=n + +# +# Compile to share library +# +CONFIG_RTE_BUILD_SHARED_LIB=n + +# +# Use newest code breaking previous ABI +# +CONFIG_RTE_NEXT_ABI=y + +# +# Machine's cache line size +# +CONFIG_RTE_CACHE_LINE_SIZE=64 + +# +# Compile Environment Abstraction Layer +# +CONFIG_RTE_LIBRTE_EAL=y +CONFIG_RTE_MAX_LCORE=128 +CONFIG_RTE_MAX_NUMA_NODES=8 +CONFIG_RTE_MAX_MEMSEG=256 +CONFIG_RTE_MAX_MEMZONE=2560 +CONFIG_RTE_MAX_TAILQ=32 +CONFIG_RTE_LOG_LEVEL=8 +CONFIG_RTE_LOG_HISTORY=256 +CONFIG_RTE_LIBEAL_USE_HPET=n +CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n +CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n +CONFIG_RTE_EAL_IGB_UIO=n +CONFIG_RTE_EAL_VFIO=n +CONFIG_RTE_MALLOC_DEBUG=n + +# Default driver path (or "" to disable) +CONFIG_RTE_EAL_PMD_PATH="" + +# +# Special configurations in PCI Config Space for high performance +# They are all deprecated, and will be removed later. +# +CONFIG_RTE_PCI_CONFIG=n +CONFIG_RTE_PCI_EXTENDED_TAG="" +CONFIG_RTE_PCI_MAX_READ_REQUEST_SIZE=0 + +# +# Compile Environment Abstraction Layer to support Vmware TSC map +# +CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y + +# +# Compile the argument parser library +# +CONFIG_RTE_LIBRTE_KVARGS=y + +# +# Compile generic ethernet library +# +CONFIG_RTE_LIBRTE_ETHER=y +CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n +CONFIG_RTE_MAX_ETHPORTS=32 +CONFIG_RTE_MAX_QUEUES_PER_PORT=1024 +CONFIG_RTE_LIBRTE_IEEE1588=n +CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16 +CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y + +# +# Support NIC bypass logic +# +CONFIG_RTE_NIC_BYPASS=n + +# +# Compile burst-oriented Amazon ENA PMD driver +# +CONFIG_RTE_LIBRTE_ENA_PMD=y +CONFIG_RTE_LIBRTE_ENA_DEBUG_RX=n +CONFIG_RTE_LIBRTE_ENA_DEBUG_TX=n +CONFIG_RTE_LIBRTE_ENA_DEBUG_TX_FREE=n +CONFIG_RTE_LIBRTE_ENA_DEBUG_DRIVER=n +CONFIG_RTE_LIBRTE_ENA_COM_DEBUG=n + +# +# Compile burst-oriented IGB & EM PMD drivers +# +CONFIG_RTE_LIBRTE_EM_PMD=y +CONFIG_RTE_LIBRTE_IGB_PMD=y +CONFIG_RTE_LIBRTE_E1000_DEBUG_INIT=n +CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n +CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n +CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n +CONFIG_RTE_LIBRTE_E1000_DEBUG_DRIVER=n +CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n + +# +# Compile burst-oriented IXGBE PMD driver +# +CONFIG_RTE_LIBRTE_IXGBE_PMD=y +CONFIG_RTE_LIBRTE_IXGBE_DEBUG_INIT=n +CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n +CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n +CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n +CONFIG_RTE_LIBRTE_IXGBE_DEBUG_DRIVER=n +CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n +CONFIG_RTE_IXGBE_INC_VECTOR=y +CONFIG_RTE_IXGBE_RX_OLFLAGS_ENABLE=y + +# +# Compile burst-oriented I40E PMD driver +# +CONFIG_RTE_LIBRTE_I40E_PMD=y +CONFIG_RTE_LIBRTE_I40E_DEBUG_INIT=n +CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n +CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n +CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n +CONFIG_RTE_LIBRTE_I40E_DEBUG_DRIVER=n +CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y +CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y +CONFIG_RTE_LIBRTE_I40E_RX_OLFLAGS_ENABLE=y +CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n +CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64 +CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VF=4 +CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4 +# interval up to 8160 us, aligned to 2 (or default value) +CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL=-1 + +# +# Compile burst-oriented FM10K PMD +# +CONFIG_RTE_LIBRTE_FM10K_PMD=y +CONFIG_RTE_LIBRTE_FM10K_DEBUG_INIT=n +CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n +CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n +CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n +CONFIG_RTE_LIBRTE_FM10K_DEBUG_DRIVER=n +CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y +CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y + +# +# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD +# +CONFIG_RTE_LIBRTE_MLX4_PMD=n +CONFIG_RTE_LIBRTE_MLX4_DEBUG=n +CONFIG_RTE_LIBRTE_MLX4_SGE_WR_N=4 +CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE=0 +CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8 +CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS=1 + +# +# Compile burst-oriented Mellanox ConnectX-4 (MLX5) PMD +# +CONFIG_RTE_LIBRTE_MLX5_PMD=n +CONFIG_RTE_LIBRTE_MLX5_DEBUG=n +CONFIG_RTE_LIBRTE_MLX5_SGE_WR_N=4 +CONFIG_RTE_LIBRTE_MLX5_MAX_INLINE=0 +CONFIG_RTE_LIBRTE_MLX5_TX_MP_CACHE=8 + +# +# Compile burst-oriented Broadcom PMD driver +# +CONFIG_RTE_LIBRTE_BNX2X_PMD=n +CONFIG_RTE_LIBRTE_BNX2X_DEBUG=n +CONFIG_RTE_LIBRTE_BNX2X_DEBUG_INIT=n +CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n +CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n +CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n +CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n + +# +# Compile burst-oriented Chelsio Terminator 10GbE/40GbE (CXGBE) PMD +# +CONFIG_RTE_LIBRTE_CXGBE_PMD=y +CONFIG_RTE_LIBRTE_CXGBE_DEBUG=n +CONFIG_RTE_LIBRTE_CXGBE_DEBUG_REG=n +CONFIG_RTE_LIBRTE_CXGBE_DEBUG_MBOX=n +CONFIG_RTE_LIBRTE_CXGBE_DEBUG_TX=n +CONFIG_RTE_LIBRTE_CXGBE_DEBUG_RX=n + +# +# Compile burst-oriented Cisco ENIC PMD driver +# +CONFIG_RTE_LIBRTE_ENIC_PMD=y +CONFIG_RTE_LIBRTE_ENIC_DEBUG=n + +# +# Compile burst-oriented Netronome NFP PMD driver +# +CONFIG_RTE_LIBRTE_NFP_PMD=n +CONFIG_RTE_LIBRTE_NFP_DEBUG=n + +# +# Compile software PMD backed by SZEDATA2 device +# +CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n +# +# Defines firmware type address space. +# RTE_LIBRTE_PMD_SZEDATA2_AS can be: +# 0 - for firmwares: +# NIC_100G1_LR4 +# HANIC_100G1_LR4 +# HANIC_100G1_SR10 +# Other values raise compile time error +CONFIG_RTE_LIBRTE_PMD_SZEDATA2_AS=0 + +# +# Compile burst-oriented VIRTIO PMD driver +# +CONFIG_RTE_LIBRTE_VIRTIO_PMD=y +CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_INIT=n +CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n +CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n +CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DRIVER=n +CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n + +# +# Compile burst-oriented VMXNET3 PMD driver +# +CONFIG_RTE_LIBRTE_VMXNET3_PMD=y +CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_INIT=n +CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n +CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n +CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n +CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_DRIVER=n + +# +# Compile example software rings based PMD +# +CONFIG_RTE_LIBRTE_PMD_RING=y +CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16 +CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16 + +# +# Compile software PMD backed by PCAP files +# +CONFIG_RTE_LIBRTE_PMD_PCAP=n + +# +# Compile link bonding PMD library +# +CONFIG_RTE_LIBRTE_PMD_BOND=y +CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n +CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n + +# +# Compile software PMD backed by AF_PACKET sockets (Linux only) +# +CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n + +# +# Compile Xen PMD +# +CONFIG_RTE_LIBRTE_PMD_XENVIRT=n + +# +# Compile null PMD +# +CONFIG_RTE_LIBRTE_PMD_NULL=y + +# +# Do prefetch of packet data within PMD driver receive function +# +CONFIG_RTE_PMD_PACKET_PREFETCH=y + +# +# Compile generic crypto device library +# +CONFIG_RTE_LIBRTE_CRYPTODEV=y +CONFIG_RTE_LIBRTE_CRYPTODEV_DEBUG=n +CONFIG_RTE_CRYPTO_MAX_DEVS=64 +CONFIG_RTE_CRYPTODEV_NAME_LEN=64 + +# +# Compile PMD for QuickAssist based devices +# +CONFIG_RTE_LIBRTE_PMD_QAT=n +CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_INIT=n +CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_TX=n +CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_RX=n +CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER=n +# +# Number of sessions to create in the session memory pool +# on a single QuickAssist device. +# +CONFIG_RTE_QAT_PMD_MAX_NB_SESSIONS=2048 + +# +# Compile PMD for AESNI backed device +# +CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n +CONFIG_RTE_LIBRTE_PMD_AESNI_MB_DEBUG=n + +# +# Compile PMD for AESNI GCM device +# +CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n +CONFIG_RTE_LIBRTE_PMD_AESNI_GCM_DEBUG=n + +# +# Compile PMD for SNOW 3G device +# +CONFIG_RTE_LIBRTE_PMD_SNOW3G=n +CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n + +# +# Compile PMD for NULL Crypto device +# +CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y + +# +# Compile librte_ring +# +CONFIG_RTE_LIBRTE_RING=y +CONFIG_RTE_LIBRTE_RING_DEBUG=n +CONFIG_RTE_RING_SPLIT_PROD_CONS=n +CONFIG_RTE_RING_PAUSE_REP_COUNT=0 + +# +# Compile librte_mempool +# +CONFIG_RTE_LIBRTE_MEMPOOL=y +CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512 +CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n + +# +# Compile librte_mbuf +# +CONFIG_RTE_LIBRTE_MBUF=y +CONFIG_RTE_LIBRTE_MBUF_DEBUG=n +CONFIG_RTE_MBUF_REFCNT_ATOMIC=y +CONFIG_RTE_PKTMBUF_HEADROOM=128 + +# +# Compile librte_timer +# +CONFIG_RTE_LIBRTE_TIMER=y +CONFIG_RTE_LIBRTE_TIMER_DEBUG=n + +# +# Compile librte_cfgfile +# +CONFIG_RTE_LIBRTE_CFGFILE=y + +# +# Compile librte_cmdline +# +CONFIG_RTE_LIBRTE_CMDLINE=y +CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n + +# +# Compile librte_hash +# +CONFIG_RTE_LIBRTE_HASH=y +CONFIG_RTE_LIBRTE_HASH_DEBUG=n + +# +# Compile librte_jobstats +# +CONFIG_RTE_LIBRTE_JOBSTATS=y + +# +# Compile librte_lpm +# +CONFIG_RTE_LIBRTE_LPM=y +CONFIG_RTE_LIBRTE_LPM_DEBUG=n + +# +# Compile librte_acl +# +CONFIG_RTE_LIBRTE_ACL=y +CONFIG_RTE_LIBRTE_ACL_DEBUG=n + +# +# Compile librte_power +# +CONFIG_RTE_LIBRTE_POWER=n +CONFIG_RTE_LIBRTE_POWER_DEBUG=n +CONFIG_RTE_MAX_LCORE_FREQS=64 + +# +# Compile librte_net +# +CONFIG_RTE_LIBRTE_NET=y + +# +# Compile librte_ip_frag +# +CONFIG_RTE_LIBRTE_IP_FRAG=y +CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n +CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4 +CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n + +# +# Compile librte_meter +# +CONFIG_RTE_LIBRTE_METER=y + +# +# Compile librte_sched +# +CONFIG_RTE_LIBRTE_SCHED=y +CONFIG_RTE_SCHED_DEBUG=n +CONFIG_RTE_SCHED_RED=n +CONFIG_RTE_SCHED_COLLECT_STATS=n +CONFIG_RTE_SCHED_SUBPORT_TC_OV=n +CONFIG_RTE_SCHED_PORT_N_GRINDERS=8 +CONFIG_RTE_SCHED_VECTOR=n + +# +# Compile the distributor library +# +CONFIG_RTE_LIBRTE_DISTRIBUTOR=y + +# +# Compile the reorder library +# +CONFIG_RTE_LIBRTE_REORDER=y + +# +# Compile librte_port +# +CONFIG_RTE_LIBRTE_PORT=y +CONFIG_RTE_PORT_STATS_COLLECT=n +CONFIG_RTE_PORT_PCAP=n + +# +# Compile librte_table +# +CONFIG_RTE_LIBRTE_TABLE=y +CONFIG_RTE_TABLE_STATS_COLLECT=n + +# +# Compile librte_pipeline +# +CONFIG_RTE_LIBRTE_PIPELINE=y +CONFIG_RTE_PIPELINE_STATS_COLLECT=n + +# +# Compile librte_kni +# +CONFIG_RTE_LIBRTE_KNI=n +CONFIG_RTE_KNI_KMOD=n +CONFIG_RTE_KNI_PREEMPT_DEFAULT=y +CONFIG_RTE_KNI_KO_DEBUG=n +CONFIG_RTE_KNI_VHOST=n +CONFIG_RTE_KNI_VHOST_MAX_CACHE_SIZE=1024 +CONFIG_RTE_KNI_VHOST_VNET_HDR_EN=n +CONFIG_RTE_KNI_VHOST_DEBUG_RX=n +CONFIG_RTE_KNI_VHOST_DEBUG_TX=n + +# +# Compile vhost library +# fuse-devel is needed to run vhost-cuse. +# fuse-devel enables user space char driver development +# vhost-user is turned on by default. +# +CONFIG_RTE_LIBRTE_VHOST=n +CONFIG_RTE_LIBRTE_VHOST_USER=y +CONFIG_RTE_LIBRTE_VHOST_NUMA=n +CONFIG_RTE_LIBRTE_VHOST_DEBUG=n + +# +# Compile vhost PMD +# To compile, CONFIG_RTE_LIBRTE_VHOST should be enabled. +# +CONFIG_RTE_LIBRTE_PMD_VHOST=n + +# +#Compile Xen domain0 support +# +CONFIG_RTE_LIBRTE_XEN_DOM0=n + +# +# Enable warning directives +# +CONFIG_RTE_INSECURE_FUNCTION_WARNING=n + +# +# Compile the test application +# +CONFIG_RTE_APP_TEST=y + +# +# Compile the PMD test application +# +CONFIG_RTE_TEST_PMD=y +CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n +CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n |