aboutsummaryrefslogtreecommitdiffstats
path: root/doc/guides/contributing/versioning.rst
diff options
context:
space:
mode:
Diffstat (limited to 'doc/guides/contributing/versioning.rst')
-rw-r--r--doc/guides/contributing/versioning.rst494
1 files changed, 494 insertions, 0 deletions
diff --git a/doc/guides/contributing/versioning.rst b/doc/guides/contributing/versioning.rst
new file mode 100644
index 00000000..ae10a984
--- /dev/null
+++ b/doc/guides/contributing/versioning.rst
@@ -0,0 +1,494 @@
+Managing ABI updates
+====================
+
+Description
+-----------
+
+This document details some methods for handling ABI management in the DPDK.
+Note this document is not exhaustive, in that C library versioning is flexible
+allowing multiple methods to achieve various goals, but it will provide the user
+with some introductory methods
+
+General Guidelines
+------------------
+
+#. Whenever possible, ABI should be preserved
+#. The libraries marked in experimental state may change without constraint.
+#. The addition of symbols is generally not problematic
+#. The modification of symbols can generally be managed with versioning
+#. The removal of symbols generally is an ABI break and requires bumping of the
+ LIBABIVER macro
+
+What is an ABI
+--------------
+
+An ABI (Application Binary Interface) is the set of runtime interfaces exposed
+by a library. It is similar to an API (Application Programming Interface) but
+is the result of compilation. It is also effectively cloned when applications
+link to dynamic libraries. That is to say when an application is compiled to
+link against dynamic libraries, it is assumed that the ABI remains constant
+between the time the application is compiled/linked, and the time that it runs.
+Therefore, in the case of dynamic linking, it is critical that an ABI is
+preserved, or (when modified), done in such a way that the application is unable
+to behave improperly or in an unexpected fashion.
+
+The DPDK ABI policy
+-------------------
+
+ABI versions are set at the time of major release labeling, and the ABI may
+change multiple times, without warning, between the last release label and the
+HEAD label of the git tree.
+
+ABI versions, once released, are available until such time as their
+deprecation has been noted in the Release Notes for at least one major release
+cycle. For example consider the case where the ABI for DPDK 2.0 has been
+shipped and then a decision is made to modify it during the development of
+DPDK 2.1. The decision will be recorded in the Release Notes for the DPDK 2.1
+release and the modification will be made available in the DPDK 2.2 release.
+
+ABI versions may be deprecated in whole or in part as needed by a given
+update.
+
+Some ABI changes may be too significant to reasonably maintain multiple
+versions. In those cases ABI's may be updated without backward compatibility
+being provided. The requirements for doing so are:
+
+#. At least 3 acknowledgments of the need to do so must be made on the
+ dpdk.org mailing list.
+
+#. The changes (including an alternative map file) must be gated with
+ the ``RTE_NEXT_ABI`` option, and provided with a deprecation notice at the
+ same time.
+ It will become the default ABI in the next release.
+
+#. A full deprecation cycle, as explained above, must be made to offer
+ downstream consumers sufficient warning of the change.
+
+#. At the beginning of the next release cycle, every ``RTE_NEXT_ABI``
+ conditions will be removed, the ``LIBABIVER`` variable in the makefile(s)
+ where the ABI is changed will be incremented, and the map files will
+ be updated.
+
+Note that the above process for ABI deprecation should not be undertaken
+lightly. ABI stability is extremely important for downstream consumers of the
+DPDK, especially when distributed in shared object form. Every effort should
+be made to preserve the ABI whenever possible. The ABI should only be changed
+for significant reasons, such as performance enhancements. ABI breakage due to
+changes such as reorganizing public structure fields for aesthetic or
+readability purposes should be avoided.
+
+Examples of Deprecation Notices
+-------------------------------
+
+The following are some examples of ABI deprecation notices which would be
+added to the Release Notes:
+
+* The Macro ``#RTE_FOO`` is deprecated and will be removed with version 2.0,
+ to be replaced with the inline function ``rte_foo()``.
+
+* The function ``rte_mbuf_grok()`` has been updated to include a new parameter
+ in version 2.0. Backwards compatibility will be maintained for this function
+ until the release of version 2.1
+
+* The members of ``struct rte_foo`` have been reorganized in release 2.0 for
+ performance reasons. Existing binary applications will have backwards
+ compatibility in release 2.0, while newly built binaries will need to
+ reference the new structure variant ``struct rte_foo2``. Compatibility will
+ be removed in release 2.2, and all applications will require updating and
+ rebuilding to the new structure at that time, which will be renamed to the
+ original ``struct rte_foo``.
+
+* Significant ABI changes are planned for the ``librte_dostuff`` library. The
+ upcoming release 2.0 will not contain these changes, but release 2.1 will,
+ and no backwards compatibility is planned due to the extensive nature of
+ these changes. Binaries using this library built prior to version 2.1 will
+ require updating and recompilation.
+
+Versioning Macros
+-----------------
+
+When a symbol is exported from a library to provide an API, it also provides a
+calling convention (ABI) that is embodied in its name, return type and
+arguments. Occasionally that function may need to change to accommodate new
+functionality or behavior. When that occurs, it is desirable to allow for
+backward compatibility for a time with older binaries that are dynamically
+linked to the DPDK.
+
+To support backward compatibility the ``lib/librte_compat/rte_compat.h``
+header file provides macros to use when updating exported functions. These
+macros are used in conjunction with the ``rte_<library>_version.map`` file for
+a given library to allow multiple versions of a symbol to exist in a shared
+library so that older binaries need not be immediately recompiled.
+
+The macros exported are:
+
+* ``VERSION_SYMBOL(b, e, n)``: Creates a symbol version table entry binding
+ versioned symbol ``b@DPDK_n`` to the internal function ``b_e``.
+
+* ``BIND_DEFAULT_SYMBOL(b, e, n)``: Creates a symbol version entry instructing
+ the linker to bind references to symbol ``b`` to the internal symbol
+ ``b_e``.
+
+* ``MAP_STATIC_SYMBOL(f, p)``: Declare the prototype ``f``, and map it to the
+ fully qualified function ``p``, so that if a symbol becomes versioned, it
+ can still be mapped back to the public symbol name.
+
+Examples of ABI Macro use
+-------------------------
+
+Updating a public API
+~~~~~~~~~~~~~~~~~~~~~
+
+Assume we have a function as follows
+
+.. code-block:: c
+
+ /*
+ * Create an acl context object for apps to
+ * manipulate
+ */
+ struct rte_acl_ctx *
+ rte_acl_create(const struct rte_acl_param *param)
+ {
+ ...
+ }
+
+
+Assume that struct rte_acl_ctx is a private structure, and that a developer
+wishes to enhance the acl api so that a debugging flag can be enabled on a
+per-context basis. This requires an addition to the structure (which, being
+private, is safe), but it also requires modifying the code as follows
+
+.. code-block:: c
+
+ /*
+ * Create an acl context object for apps to
+ * manipulate
+ */
+ struct rte_acl_ctx *
+ rte_acl_create(const struct rte_acl_param *param, int debug)
+ {
+ ...
+ }
+
+
+Note also that, being a public function, the header file prototype must also be
+changed, as must all the call sites, to reflect the new ABI footprint. We will
+maintain previous ABI versions that are accessible only to previously compiled
+binaries
+
+The addition of a parameter to the function is ABI breaking as the function is
+public, and existing application may use it in its current form. However, the
+compatibility macros in DPDK allow a developer to use symbol versioning so that
+multiple functions can be mapped to the same public symbol based on when an
+application was linked to it. To see how this is done, we start with the
+requisite libraries version map file. Initially the version map file for the
+acl library looks like this
+
+.. code-block:: none
+
+ DPDK_2.0 {
+ global:
+
+ rte_acl_add_rules;
+ rte_acl_build;
+ rte_acl_classify;
+ rte_acl_classify_alg;
+ rte_acl_classify_scalar;
+ rte_acl_create;
+ rte_acl_dump;
+ rte_acl_find_existing;
+ rte_acl_free;
+ rte_acl_ipv4vlan_add_rules;
+ rte_acl_ipv4vlan_build;
+ rte_acl_list_dump;
+ rte_acl_reset;
+ rte_acl_reset_rules;
+ rte_acl_set_ctx_classify;
+
+ local: *;
+ };
+
+This file needs to be modified as follows
+
+.. code-block:: none
+
+ DPDK_2.0 {
+ global:
+
+ rte_acl_add_rules;
+ rte_acl_build;
+ rte_acl_classify;
+ rte_acl_classify_alg;
+ rte_acl_classify_scalar;
+ rte_acl_create;
+ rte_acl_dump;
+ rte_acl_find_existing;
+ rte_acl_free;
+ rte_acl_ipv4vlan_add_rules;
+ rte_acl_ipv4vlan_build;
+ rte_acl_list_dump;
+ rte_acl_reset;
+ rte_acl_reset_rules;
+ rte_acl_set_ctx_classify;
+
+ local: *;
+ };
+
+ DPDK_2.1 {
+ global:
+ rte_acl_create;
+
+ } DPDK_2.0;
+
+The addition of the new block tells the linker that a new version node is
+available (DPDK_2.1), which contains the symbol rte_acl_create, and inherits the
+symbols from the DPDK_2.0 node. This list is directly translated into a list of
+exported symbols when DPDK is compiled as a shared library
+
+Next, we need to specify in the code which function map to the rte_acl_create
+symbol at which versions. First, at the site of the initial symbol definition,
+we need to update the function so that it is uniquely named, and not in conflict
+with the public symbol name
+
+.. code-block:: c
+
+ struct rte_acl_ctx *
+ -rte_acl_create(const struct rte_acl_param *param)
+ +rte_acl_create_v20(const struct rte_acl_param *param)
+ {
+ size_t sz;
+ struct rte_acl_ctx *ctx;
+ ...
+
+Note that the base name of the symbol was kept intact, as this is conducive to
+the macros used for versioning symbols. That is our next step, mapping this new
+symbol name to the initial symbol name at version node 2.0. Immediately after
+the function, we add this line of code
+
+.. code-block:: c
+
+ VERSION_SYMBOL(rte_acl_create, _v20, 2.0);
+
+Remembering to also add the rte_compat.h header to the requisite c file where
+these changes are being made. The above macro instructs the linker to create a
+new symbol ``rte_acl_create@DPDK_2.0``, which matches the symbol created in older
+builds, but now points to the above newly named function. We have now mapped
+the original rte_acl_create symbol to the original function (but with a new
+name)
+
+Next, we need to create the 2.1 version of the symbol. We create a new function
+name, with a different suffix, and implement it appropriately
+
+.. code-block:: c
+
+ struct rte_acl_ctx *
+ rte_acl_create_v21(const struct rte_acl_param *param, int debug);
+ {
+ struct rte_acl_ctx *ctx = rte_acl_create_v20(param);
+
+ ctx->debug = debug;
+
+ return ctx;
+ }
+
+This code serves as our new API call. Its the same as our old call, but adds
+the new parameter in place. Next we need to map this function to the symbol
+``rte_acl_create@DPDK_2.1``. To do this, we modify the public prototype of the call
+in the header file, adding the macro there to inform all including applications,
+that on re-link, the default rte_acl_create symbol should point to this
+function. Note that we could do this by simply naming the function above
+rte_acl_create, and the linker would chose the most recent version tag to apply
+in the version script, but we can also do this in the header file
+
+.. code-block:: c
+
+ struct rte_acl_ctx *
+ -rte_acl_create(const struct rte_acl_param *param);
+ +rte_acl_create(const struct rte_acl_param *param, int debug);
+ +BIND_DEFAULT_SYMBOL(rte_acl_create, _v21, 2.1);
+
+The BIND_DEFAULT_SYMBOL macro explicitly tells applications that include this
+header, to link to the rte_acl_create_v21 function and apply the DPDK_2.1
+version node to it. This method is more explicit and flexible than just
+re-implementing the exact symbol name, and allows for other features (such as
+linking to the old symbol version by default, when the new ABI is to be opt-in
+for a period.
+
+One last thing we need to do. Note that we've taken what was a public symbol,
+and duplicated it into two uniquely and differently named symbols. We've then
+mapped each of those back to the public symbol ``rte_acl_create`` with different
+version tags. This only applies to dynamic linking, as static linking has no
+notion of versioning. That leaves this code in a position of no longer having a
+symbol simply named ``rte_acl_create`` and a static build will fail on that
+missing symbol.
+
+To correct this, we can simply map a function of our choosing back to the public
+symbol in the static build with the ``MAP_STATIC_SYMBOL`` macro. Generally the
+assumption is that the most recent version of the symbol is the one you want to
+map. So, back in the C file where, immediately after ``rte_acl_create_v21`` is
+defined, we add this
+
+.. code-block:: c
+
+ struct rte_acl_create_v21(const struct rte_acl_param *param, int debug)
+ {
+ ...
+ }
+ MAP_STATIC_SYMBOL(struct rte_acl_create(const struct rte_acl_param *param, int debug), rte_acl_create_v21);
+
+That tells the compiler that, when building a static library, any calls to the
+symbol ``rte_acl_create`` should be linked to ``rte_acl_create_v21``
+
+That's it, on the next shared library rebuild, there will be two versions of
+rte_acl_create, an old DPDK_2.0 version, used by previously built applications,
+and a new DPDK_2.1 version, used by future built applications.
+
+
+Deprecating part of a public API
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Lets assume that you've done the above update, and after a few releases have
+passed you decide you would like to retire the old version of the function.
+After having gone through the ABI deprecation announcement process, removal is
+easy. Start by removing the symbol from the requisite version map file:
+
+.. code-block:: none
+
+ DPDK_2.0 {
+ global:
+
+ rte_acl_add_rules;
+ rte_acl_build;
+ rte_acl_classify;
+ rte_acl_classify_alg;
+ rte_acl_classify_scalar;
+ rte_acl_dump;
+ - rte_acl_create
+ rte_acl_find_existing;
+ rte_acl_free;
+ rte_acl_ipv4vlan_add_rules;
+ rte_acl_ipv4vlan_build;
+ rte_acl_list_dump;
+ rte_acl_reset;
+ rte_acl_reset_rules;
+ rte_acl_set_ctx_classify;
+
+ local: *;
+ };
+
+ DPDK_2.1 {
+ global:
+ rte_acl_create;
+ } DPDK_2.0;
+
+
+Next remove the corresponding versioned export.
+
+.. code-block:: c
+
+ -VERSION_SYMBOL(rte_acl_create, _v20, 2.0);
+
+
+Note that the internal function definition could also be removed, but its used
+in our example by the newer version _v21, so we leave it in place. This is a
+coding style choice.
+
+Lastly, we need to bump the LIBABIVER number for this library in the Makefile to
+indicate to applications doing dynamic linking that this is a later, and
+possibly incompatible library version:
+
+.. code-block:: c
+
+ -LIBABIVER := 1
+ +LIBABIVER := 2
+
+Deprecating an entire ABI version
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+While removing a symbol from and ABI may be useful, it is often more practical
+to remove an entire version node at once. If a version node completely
+specifies an API, then removing part of it, typically makes it incomplete. In
+those cases it is better to remove the entire node
+
+To do this, start by modifying the version map file, such that all symbols from
+the node to be removed are merged into the next node in the map
+
+In the case of our map above, it would transform to look as follows
+
+.. code-block:: none
+
+ DPDK_2.1 {
+ global:
+
+ rte_acl_add_rules;
+ rte_acl_build;
+ rte_acl_classify;
+ rte_acl_classify_alg;
+ rte_acl_classify_scalar;
+ rte_acl_dump;
+ rte_acl_create
+ rte_acl_find_existing;
+ rte_acl_free;
+ rte_acl_ipv4vlan_add_rules;
+ rte_acl_ipv4vlan_build;
+ rte_acl_list_dump;
+ rte_acl_reset;
+ rte_acl_reset_rules;
+ rte_acl_set_ctx_classify;
+
+ local: *;
+ };
+
+Then any uses of BIND_DEFAULT_SYMBOL that pointed to the old node should be
+updated to point to the new version node in any header files for all affected
+symbols.
+
+.. code-block:: c
+
+ -BIND_DEFAULT_SYMBOL(rte_acl_create, _v20, 2.0);
+ +BIND_DEFAULT_SYMBOL(rte_acl_create, _v21, 2.1);
+
+Lastly, any VERSION_SYMBOL macros that point to the old version node should be
+removed, taking care to keep, where need old code in place to support newer
+versions of the symbol.
+
+Running the ABI Validator
+-------------------------
+
+The ``scripts`` directory in the DPDK source tree contains a utility program,
+``validate-abi.sh``, for validating the DPDK ABI based on the Linux `ABI
+Compliance Checker
+<http://ispras.linuxbase.org/index.php/ABI_compliance_checker>`_.
+
+This has a dependency on the ``abi-compliance-checker`` and ``and abi-dumper``
+utilities which can be installed via a package manager. For example::
+
+ sudo yum install abi-compliance-checker
+ sudo yum install abi-dumper
+
+The syntax of the ``validate-abi.sh`` utility is::
+
+ ./scripts/validate-abi.sh <REV1> <REV2> <TARGET>
+
+Where ``REV1`` and ``REV2`` are valid gitrevisions(7)
+https://www.kernel.org/pub/software/scm/git/docs/gitrevisions.html
+on the local repo and target is the usual DPDK compilation target.
+
+For example:
+
+ # Check between the previous and latest commit:
+ ./scripts/validate-abi.sh HEAD~1 HEAD x86_64-native-linuxapp-gcc
+
+ # Check between two tags:
+ ./scripts/validate-abi.sh v2.0.0 v2.1.0 x86_64-native-linuxapp-gcc
+
+ # Check between git master and local topic-branch "vhost-hacking":
+ ./scripts/validate-abi.sh master vhost-hacking x86_64-native-linuxapp-gcc
+
+After the validation script completes (it can take a while since it need to
+compile both tags) it will create compatibility reports in the
+``./compat_report`` directory. Listed incompatibilities can be found as
+follows::
+
+ grep -lr Incompatible compat_reports/