1 files changed, 113 insertions, 0 deletions
diff --git a/doc/guides/cryptodevs/aesni_mb.rst b/doc/guides/cryptodevs/aesni_mb.rst
new file mode 100644
index 00000000..9e04853a
--- /dev/null
+++ b/doc/guides/cryptodevs/aesni_mb.rst
@@ -0,0 +1,113 @@
+..  BSD LICENSE
+    Copyright(c) 2015 Intel Corporation. All rights reserved.
+
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions
+    are met:
+
+    * Redistributions of source code must retain the above copyright
+    notice, this list of conditions and the following disclaimer.
+    * Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in
+    the documentation and/or other materials provided with the
+    distribution.
+    * Neither the name of Intel Corporation nor the names of its
+    contributors may be used to endorse or promote products derived
+    from this software without specific prior written permission.
+
+    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+    "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+    LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+    A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+    OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+    SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+    LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+    DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+    THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+    OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+AESN-NI Multi Buffer Crytpo Poll Mode Driver
+============================================
+
+
+The AESNI MB PMD (**librte_pmd_aesni_mb**) provides poll mode crypto driver
+support for utilizing Intel multi buffer library, see the white paper
+`Fast Multi-buffer IPsec Implementations on Intel® Architecture Processors
+<https://www-ssl.intel.com/content/www/us/en/intelligent-systems/intel-technology/fast-multi-buffer-ipsec-implementations-ia-processors-paper.html?wapkw=multi+buffer>`_.
+
+The AES-NI MB PMD has current only been tested on Fedora 21 64-bit with gcc.
+
+Features
+--------
+
+AESNI MB PMD has support for:
+
+Cipher algorithms:
+
+* RTE_CRYPTO_SYM_CIPHER_AES128_CBC
+* RTE_CRYPTO_SYM_CIPHER_AES256_CBC
+* RTE_CRYPTO_SYM_CIPHER_AES512_CBC
+
+Hash algorithms:
+
+* RTE_CRYPTO_SYM_HASH_SHA1_HMAC
+* RTE_CRYPTO_SYM_HASH_SHA256_HMAC
+* RTE_CRYPTO_SYM_HASH_SHA512_HMAC
+
+Limitations
+-----------
+
+* Chained mbufs are not supported.
+* Hash only is not supported.
+* Cipher only is not supported.
+* Only in-place is currently supported (destination address is the same as source address).
+* Only supports session-oriented API implementation (session-less APIs are not supported).
+*  Not performance tuned.
+
+Installation
+------------
+
+To build DPDK with the AESNI_MB_PMD the user is required to download the mult-
+buffer library from `here <https://downloadcenter.intel.com/download/22972>`_
+and compile it on their user system before building DPDK. When building the
+multi-buffer library it is necessary to have YASM package installed and also
+requires the overriding of YASM path when building, as a path is hard coded in
+the Makefile of the release package.
+
+.. code-block:: console
+
+	make YASM=/usr/bin/yasm
+
+Initialization
+--------------
+
+In order to enable this virtual crypto PMD, user must:
+
+* Export the environmental variable AESNI_MULTI_BUFFER_LIB_PATH with the path where
+  the library was extracted.
+
+* Build the multi buffer library (explained in Installation section).
+
+* Set CONFIG_RTE_LIBRTE_PMD_AESNI_MB=y in config/common_base.
+
+To use the PMD in an application, user must:
+
+* Call rte_eal_vdev_init("cryptodev_aesni_mb_pmd") within the application.
+
+* Use --vdev="cryptodev_aesni_mb_pmd" in the EAL options, which will call rte_eal_vdev_init() internally.
+
+The following parameters (all optional) can be provided in the previous two calls:
+
+* socket_id: Specify the socket where the memory for the device is going to be allocated
+  (by default, socket_id will be the socket where the core that is creating the PMD is running on).
+
+* max_nb_queue_pairs: Specify the maximum number of queue pairs in the device (8 by default).
+
+* max_nb_sessions: Specify the maximum number of sessions that can be created (2048 by default).
+
+Example:
+
+.. code-block:: console
+
+    ./l2fwd-crypto -c 40 -n 4 --vdev="cryptodev_aesni_mb_pmd,socket_id=1,max_nb_sessions=128"