summaryrefslogtreecommitdiffstats
path: root/doc/guides/cryptodevs/mvsam.rst
diff options
context:
space:
mode:
Diffstat (limited to 'doc/guides/cryptodevs/mvsam.rst')
-rw-r--r--doc/guides/cryptodevs/mvsam.rst147
1 files changed, 47 insertions, 100 deletions
diff --git a/doc/guides/cryptodevs/mvsam.rst b/doc/guides/cryptodevs/mvsam.rst
index fd418c26..7acae19b 100644
--- a/doc/guides/cryptodevs/mvsam.rst
+++ b/doc/guides/cryptodevs/mvsam.rst
@@ -37,32 +37,50 @@ support by utilizing MUSDK library, which provides cryptographic operations
acceleration by using Security Acceleration Engine (EIP197) directly from
user-space with minimum overhead and high performance.
+Detailed information about SoCs that use MVSAM crypto driver can be obtained here:
+
+* https://www.marvell.com/embedded-processors/armada-70xx/
+* https://www.marvell.com/embedded-processors/armada-80xx/
+* https://www.marvell.com/embedded-processors/armada-3700/
+
+
Features
--------
MVSAM CRYPTO PMD has support for:
-* Symmetric crypto
-* Sym operation chaining
-* AES CBC (128)
-* AES CBC (192)
-* AES CBC (256)
-* AES CTR (128)
-* AES CTR (192)
-* AES CTR (256)
-* 3DES CBC
-* 3DES CTR
-* MD5
-* MD5 HMAC
-* SHA1
-* SHA1 HMAC
-* SHA256
-* SHA256 HMAC
-* SHA384
-* SHA384 HMAC
-* SHA512
-* SHA512 HMAC
-* AES GCM (128)
+Cipher algorithms:
+
+* ``RTE_CRYPTO_CIPHER_NULL``
+* ``RTE_CRYPTO_CIPHER_AES_CBC``
+* ``RTE_CRYPTO_CIPHER_AES_CTR``
+* ``RTE_CRYPTO_CIPHER_AES_ECB``
+* ``RTE_CRYPTO_CIPHER_3DES_CBC``
+* ``RTE_CRYPTO_CIPHER_3DES_CTR``
+* ``RTE_CRYPTO_CIPHER_3DES_ECB``
+
+Hash algorithms:
+
+* ``RTE_CRYPTO_AUTH_NULL``
+* ``RTE_CRYPTO_AUTH_MD5``
+* ``RTE_CRYPTO_AUTH_MD5_HMAC``
+* ``RTE_CRYPTO_AUTH_SHA1``
+* ``RTE_CRYPTO_AUTH_SHA1_HMAC``
+* ``RTE_CRYPTO_AUTH_SHA224``
+* ``RTE_CRYPTO_AUTH_SHA224_HMAC``
+* ``RTE_CRYPTO_AUTH_SHA256``
+* ``RTE_CRYPTO_AUTH_SHA256_HMAC``
+* ``RTE_CRYPTO_AUTH_SHA384``
+* ``RTE_CRYPTO_AUTH_SHA384_HMAC``
+* ``RTE_CRYPTO_AUTH_SHA512``
+* ``RTE_CRYPTO_AUTH_SHA512_HMAC``
+* ``RTE_CRYPTO_AUTH_AES_GMAC``
+
+AEAD algorithms:
+
+* ``RTE_CRYPTO_AEAD_AES_GCM``
+
+For supported feature flags please consult :doc:`overview`.
Limitations
-----------
@@ -77,25 +95,18 @@ MVSAM CRYPTO PMD driver compilation is disabled by default due to external depen
Currently there are two driver specific compilation options in
``config/common_base`` available:
-- ``CONFIG_RTE_LIBRTE_MVSAM_CRYPTO`` (default ``n``)
+- ``CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO`` (default: ``n``)
Toggle compilation of the librte_pmd_mvsam driver.
-- ``CONFIG_RTE_LIBRTE_MVSAM_CRYPTO_DEBUG`` (default ``n``)
-
- Toggle display of debugging messages.
-
-For a list of prerequisites please refer to `Prerequisites` section in
-:ref:`MVPP2 Poll Mode Driver <mvpp2_poll_mode_driver>` guide.
-
MVSAM CRYPTO PMD requires MUSDK built with EIP197 support thus following
extra option must be passed to the library configuration script:
.. code-block:: console
- --enable-sam
+ --enable-sam [--enable-sam-statistics] [--enable-sam-debug]
-For `crypto_safexcel.ko` module build instructions please refer
+For instructions how to build required kernel modules please refer
to `doc/musdk_get_started.txt`.
Initialization
@@ -106,17 +117,15 @@ loaded:
.. code-block:: console
- insmod musdk_uio.ko
- insmod mvpp2x_sysfs.ko
- insmod mv_pp_uio.ko
+ insmod musdk_cma.ko
+ insmod crypto_safexcel.ko rings=0,0
insmod mv_sam_uio.ko
- insmod crypto_safexcel.ko
The following parameters (all optional) are exported by the driver:
-* max_nb_queue_pairs: maximum number of queue pairs in the device (8 by default).
-* max_nb_sessions: maximum number of sessions that can be created (2048 by default).
-* socket_id: socket on which to allocate the device resources on.
+- ``max_nb_queue_pairs``: maximum number of queue pairs in the device (default: 8 - A8K, 4 - A7K/A3K).
+- ``max_nb_sessions``: maximum number of sessions that can be created (default: 2048).
+- ``socket_id``: socket on which to allocate the device resources on.
l2fwd-crypto example application can be used to verify MVSAM CRYPTO PMD
operation:
@@ -129,65 +138,3 @@ operation:
--auth_op GENERATE --auth_algo sha1-hmac \
--auth_key 10:11:12:13:14:15:16:17:18:19:1a:1b:1c:1d:1e:1f
-Example output:
-
-.. code-block:: console
-
- [...]
- AAD: at [0x7f253ceb80], len=
- P ID 0 configuration ----
- Port mode : KR
- MAC status : disabled
- Link status : link up
- Port speed : 10G
- Port duplex : full
- Port: Egress enable tx_port_num=16 qmap=0x1
- PORT: Port0 - link
- P ID 0 configuration ----
- Port mode : KR
- MAC status : disabled
- Link status : link down
- Port speed : 10G
- Port duplex : full
- Port: Egress enable tx_port_num=16 qmap=0x1
- Port 0, MAC address: 00:50:43:02:21:20
-
-
- Checking link statusdone
- Port 0 Link Up - speed 0 Mbps - full-duplex
- Lcore 0: RX port 0
- Allocated session pool on socket 0
- eip197: 0:0 registers: paddr: 0xf2880000, vaddr: 0x0x7f56a80000
- DMA buffer (131136 bytes) for CDR #0 allocated: paddr = 0xb0585e00, vaddr = 0x7f09384e00
- DMA buffer (131136 bytes) for RDR #0 allocated: paddr = 0xb05a5f00, vaddr = 0x7f093a4f00
- DMA buffers allocated for 2049 operations. Tokens - 256 bytes
- Lcore 0: cryptodev 0
- L2FWD: lcore 1 has nothing to do
- L2FWD: lcore 2 has nothing to do
- L2FWD: lcore 3 has nothing to do
- L2FWD: entering main loop on lcore 0
- L2FWD: -- lcoreid=0 portid=0
- L2FWD: -- lcoreid=0 cryptoid=0
- Options:-
- nportmask: ffffffff
- ports per lcore: 1
- refresh period : 10000
- single lcore mode: disabled
- stats_printing: enabled
- sessionless crypto: disabled
-
- Crypto chain: Input --> Encrypt --> Auth generate --> Output
-
- ---- Cipher information ---
- Algorithm: aes-cbc
- Cipher key: at [0x7f56db4e80], len=16
- 00000000: 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F | ................
- IV: at [0x7f56db4b80], len=16
- 00000000: 20 F0 63 0E 45 EB 2D 84 72 D4 13 6E 36 B5 AF FE | .c.E.-.r..n6...
-
- ---- Authentication information ---
- Algorithm: sha1-hmac
- Auth key: at [0x7f56db4d80], len=16
- 00000000: 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F | ................
- IV: at [0x7f56db4a80], len=0
- AAD: at [0x7f253ceb80], len=