diff options
Diffstat (limited to 'doc/guides/cryptodevs')
25 files changed, 1448 insertions, 336 deletions
diff --git a/doc/guides/cryptodevs/aesni_gcm.rst b/doc/guides/cryptodevs/aesni_gcm.rst index 04bf43c2..84cdc52a 100644 --- a/doc/guides/cryptodevs/aesni_gcm.rst +++ b/doc/guides/cryptodevs/aesni_gcm.rst @@ -32,10 +32,8 @@ AES-NI GCM Crypto Poll Mode Driver The AES-NI GCM PMD (**librte_pmd_aesni_gcm**) provides poll mode crypto driver -support for utilizing Intel multi buffer library (see AES-NI Multi-buffer PMD documentation -to learn more about it, including installation). - -The AES-NI GCM PMD has current only been tested on Fedora 21 64-bit with gcc. +support for utilizing Intel ISA-L crypto library, which provides operation acceleration +through the AES-NI instruction sets for AES-GCM authenticated cipher algorithm. Features -------- @@ -49,24 +47,29 @@ Cipher algorithms: Authentication algorithms: * RTE_CRYPTO_AUTH_AES_GCM +* RTE_CRYPTO_AUTH_AES_GMAC + +Installation +------------ + +To build DPDK with the AESNI_GCM_PMD the user is required to install +the ``libisal_crypto`` library in the build environment. +For download and more details please visit `<https://github.com/01org/isa-l_crypto>`_. Initialization -------------- In order to enable this virtual crypto PMD, user must: -* Export the environmental variable AESNI_MULTI_BUFFER_LIB_PATH with the path where - the library was extracted. - -* Build the multi buffer library (go to Installation section in AES-NI MB PMD documentation). +* Install the ISA-L crypto library (explained in Installation section). * Set CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=y in config/common_base. To use the PMD in an application, user must: -* Call rte_eal_vdev_init("crypto_aesni_gcm") within the application. +* Call rte_vdev_init("crypto_aesni_gcm") within the application. -* Use --vdev="crypto_aesni_gcm" in the EAL options, which will call rte_eal_vdev_init() internally. +* Use --vdev="crypto_aesni_gcm" in the EAL options, which will call rte_vdev_init() internally. The following parameters (all optional) can be provided in the previous two calls: @@ -81,14 +84,11 @@ Example: .. code-block:: console - ./l2fwd-crypto -c 40 -n 4 --vdev="crypto_aesni_gcm,socket_id=1,max_nb_sessions=128" + ./l2fwd-crypto -l 6 -n 4 --vdev="crypto_aesni_gcm,socket_id=1,max_nb_sessions=128" Limitations ----------- -* Chained mbufs are not supported. +* Chained mbufs are supported but only out-of-place (destination mbuf must be contiguous). * Hash only is not supported. * Cipher only is not supported. -* Only in-place is currently supported (destination address is the same as source address). -* Only supports session-oriented API implementation (session-less APIs are not supported). -* Not performance tuned. diff --git a/doc/guides/cryptodevs/aesni_mb.rst b/doc/guides/cryptodevs/aesni_mb.rst index e812e957..ecb52a10 100644 --- a/doc/guides/cryptodevs/aesni_mb.rst +++ b/doc/guides/cryptodevs/aesni_mb.rst @@ -27,7 +27,7 @@ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -AESN-NI Multi Buffer Crytpo Poll Mode Driver +AESN-NI Multi Buffer Crypto Poll Mode Driver ============================================ @@ -51,36 +51,53 @@ Cipher algorithms: * RTE_CRYPTO_CIPHER_AES128_CTR * RTE_CRYPTO_CIPHER_AES192_CTR * RTE_CRYPTO_CIPHER_AES256_CTR +* RTE_CRYPTO_CIPHER_AES_DOCSISBPI Hash algorithms: +* RTE_CRYPTO_HASH_MD5_HMAC * RTE_CRYPTO_HASH_SHA1_HMAC +* RTE_CRYPTO_HASH_SHA224_HMAC * RTE_CRYPTO_HASH_SHA256_HMAC +* RTE_CRYPTO_HASH_SHA384_HMAC * RTE_CRYPTO_HASH_SHA512_HMAC +* RTE_CRYPTO_HASH_AES_XCBC_HMAC Limitations ----------- * Chained mbufs are not supported. -* Hash only is not supported. -* Cipher only is not supported. * Only in-place is currently supported (destination address is the same as source address). * Only supports session-oriented API implementation (session-less APIs are not supported). -* Not performance tuned. Installation ------------ -To build DPDK with the AESNI_MB_PMD the user is required to download the mult- -buffer library from `here <https://downloadcenter.intel.com/download/22972>`_ -and compile it on their user system before building DPDK. When building the -multi-buffer library it is necessary to have YASM package installed and also -requires the overriding of YASM path when building, as a path is hard coded in -the Makefile of the release package. +To build DPDK with the AESNI_MB_PMD the user is required to download the multi-buffer +library from `here <https://github.com/01org/intel-ipsec-mb>`_ +and compile it on their user system before building DPDK. +The latest version of the library supported by this PMD is v0.45, which +can be downloaded in `<https://github.com/01org/intel-ipsec-mb/archive/v0.45.zip>`_. .. code-block:: console - make YASM=/usr/bin/yasm + make + +As a reference, the following table shows a mapping between the past DPDK versions +and the Multi-Buffer library version supported by them: + +.. _table_aesni_mb_versions: + +.. table:: DPDK and Multi-Buffer library version compatibility + + ============= ============================ + DPDK version Multi-buffer library version + ============= ============================ + 2.2 - 16.11 0.43 - 0.44 + 17.02 0.44 + 17.05 0.45 + ============= ============================ + Initialization -------------- @@ -96,9 +113,9 @@ In order to enable this virtual crypto PMD, user must: To use the PMD in an application, user must: -* Call rte_eal_vdev_init("crypto_aesni_mb") within the application. +* Call rte_vdev_init("crypto_aesni_mb") within the application. -* Use --vdev="crypto_aesni_mb" in the EAL options, which will call rte_eal_vdev_init() internally. +* Use --vdev="crypto_aesni_mb" in the EAL options, which will call rte_vdev_init() internally. The following parameters (all optional) can be provided in the previous two calls: @@ -113,4 +130,4 @@ Example: .. code-block:: console - ./l2fwd-crypto -c 40 -n 4 --vdev="crypto_aesni_mb,socket_id=1,max_nb_sessions=128" + ./l2fwd-crypto -l 6 -n 4 --vdev="crypto_aesni_mb,socket_id=1,max_nb_sessions=128" diff --git a/doc/guides/cryptodevs/armv8.rst b/doc/guides/cryptodevs/armv8.rst new file mode 100644 index 00000000..de63793f --- /dev/null +++ b/doc/guides/cryptodevs/armv8.rst @@ -0,0 +1,98 @@ +.. BSD LICENSE + Copyright (C) Cavium networks Ltd. 2017. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + * Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + * Neither the name of Cavium networks nor the names of its + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +ARMv8 Crypto Poll Mode Driver +============================= + +This code provides the initial implementation of the ARMv8 crypto PMD. +The driver uses ARMv8 cryptographic extensions to process chained crypto +operations in an optimized way. The core functionality is provided by +a low-level library, written in the assembly code. + +Features +-------- + +ARMv8 Crypto PMD has support for the following algorithm pairs: + +Supported cipher algorithms: + +* ``RTE_CRYPTO_CIPHER_AES_CBC`` + +Supported authentication algorithms: + +* ``RTE_CRYPTO_AUTH_SHA1_HMAC`` +* ``RTE_CRYPTO_AUTH_SHA256_HMAC`` + +Installation +------------ + +In order to enable this virtual crypto PMD, user must: + +* Download ARMv8 crypto library source code from + `here <https://github.com/caviumnetworks/armv8_crypto>`_ + +* Export the environmental variable ARMV8_CRYPTO_LIB_PATH with + the path where the ``armv8_crypto`` library was downloaded + or cloned. + +* Build the library by invoking: + +.. code-block:: console + + make -C $ARMV8_CRYPTO_LIB_PATH/ + +* Set CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=y in + config/defconfig_arm64-armv8a-linuxapp-gcc + +The corresponding device can be created only if the following features +are supported by the CPU: + +* ``RTE_CPUFLAG_AES`` +* ``RTE_CPUFLAG_SHA1`` +* ``RTE_CPUFLAG_SHA2`` +* ``RTE_CPUFLAG_NEON`` + +Initialization +-------------- + +User can use app/test application to check how to use this PMD and to verify +crypto processing. + +Test name is cryptodev_sw_armv8_autotest. +For performance test cryptodev_sw_armv8_perftest can be used. + +Limitations +----------- + +* Maximum number of sessions is 2048. +* Only chained operations are supported. +* AES-128-CBC is the only supported cipher variant. +* Cipher input data has to be a multiple of 16 bytes. +* Digest input data has to be a multiple of 8 bytes. diff --git a/doc/guides/cryptodevs/dpaa2_sec.rst b/doc/guides/cryptodevs/dpaa2_sec.rst new file mode 100644 index 00000000..becb910e --- /dev/null +++ b/doc/guides/cryptodevs/dpaa2_sec.rst @@ -0,0 +1,232 @@ +.. BSD LICENSE + Copyright(c) 2016 NXP. All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + * Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + * Neither the name of NXP nor the names of its + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +NXP DPAA2 CAAM (DPAA2_SEC) +========================== + +The DPAA2_SEC PMD provides poll mode crypto driver support for NXP DPAA2 CAAM +hardware accelerator. + +Architecture +------------ + +SEC is the SOC's security engine, which serves as NXP's latest cryptographic +acceleration and offloading hardware. It combines functions previously +implemented in separate modules to create a modular and scalable acceleration +and assurance engine. It also implements block encryption algorithms, stream +cipher algorithms, hashing algorithms, public key algorithms, run-time +integrity checking, and a hardware random number generator. SEC performs +higher-level cryptographic operations than previous NXP cryptographic +accelerators. This provides significant improvement to system level performance. + +DPAA2_SEC is one of the hardware resource in DPAA2 Architecture. More information +on DPAA2 Architecture is described in :ref:`dpaa2_overview`. + +DPAA2_SEC PMD is one of DPAA2 drivers which interacts with Management Complex (MC) +portal to access the hardware object - DPSECI. The MC provides access to create, +discover, connect, configure and destroy dpseci objects in DPAA2_SEC PMD. + +DPAA2_SEC PMD also uses some of the other hardware resources like buffer pools, +queues, queue portals to store and to enqueue/dequeue data to the hardware SEC. + +DPSECI objects are detected by PMD using a resource container called DPRC (like +in :ref:`dpaa2_overview`). + +For example: + +.. code-block:: console + + DPRC.1 (bus) + | + +--+--------+-------+-------+-------+---------+ + | | | | | | + DPMCP.1 DPIO.1 DPBP.1 DPNI.1 DPMAC.1 DPSECI.1 + DPMCP.2 DPIO.2 DPNI.2 DPMAC.2 DPSECI.2 + DPMCP.3 + +Implementation +-------------- + +SEC provides platform assurance by working with SecMon, which is a companion +logic block that tracks the security state of the SOC. SEC is programmed by +means of descriptors (not to be confused with frame descriptors (FDs)) that +indicate the operations to be performed and link to the message and +associated data. SEC incorporates two DMA engines to fetch the descriptors, +read the message data, and write the results of the operations. The DMA +engine provides a scatter/gather capability so that SEC can read and write +data scattered in memory. SEC may be configured by means of software for +dynamic changes in byte ordering. The default configuration for this version +of SEC is little-endian mode. + +A block diagram similar to dpaa2 NIC is shown below to show where DPAA2_SEC +fits in the DPAA2 Bus model + +.. code-block:: console + + + +----------------+ + | DPDK DPAA2_SEC | + | PMD | + +----------------+ +------------+ + | MC SEC object |.......| Mempool | + . . . . . . . . . | (DPSECI) | | (DPBP) | + . +---+---+--------+ +-----+------+ + . ^ | . + . | |<enqueue, . + . | | dequeue> . + . | | . + . +---+---V----+ . + . . . . . . . . . . .| DPIO driver| . + . . | (DPIO) | . + . . +-----+------+ . + . . | QBMAN | . + . . | Driver | . + +----+------+-------+ +-----+----- | . + | dpaa2 bus | | . + | VFIO fslmc-bus |....................|......................... + | | | + | /bus/fslmc | | + +-------------------+ | + | + ========================== HARDWARE =====|======================= + DPIO + | + DPSECI---DPBP + =========================================|======================== + + + +Features +-------- + +The DPAA2 PMD has support for: + +Cipher algorithms: + +* ``RTE_CRYPTO_CIPHER_3DES_CBC`` +* ``RTE_CRYPTO_CIPHER_AES128_CBC`` +* ``RTE_CRYPTO_CIPHER_AES192_CBC`` +* ``RTE_CRYPTO_CIPHER_AES256_CBC`` + +Hash algorithms: + +* ``RTE_CRYPTO_AUTH_SHA1_HMAC`` +* ``RTE_CRYPTO_AUTH_SHA224_HMAC`` +* ``RTE_CRYPTO_AUTH_SHA256_HMAC`` +* ``RTE_CRYPTO_AUTH_SHA384_HMAC`` +* ``RTE_CRYPTO_AUTH_SHA512_HMAC`` +* ``RTE_CRYPTO_AUTH_MD5_HMAC`` + +Supported DPAA2 SoCs +-------------------- + +* LS2080A/LS2040A +* LS2084A/LS2044A +* LS2088A/LS2048A +* LS1088A/LS1048A + +Limitations +----------- + +* Chained mbufs are not supported. +* Hash followed by Cipher mode is not supported +* Only supports the session-oriented API implementation (session-less APIs are not supported). + +Prerequisites +------------- + +DPAA2_SEC driver has similar pre-requisites as described in :ref:`dpaa2_overview`. +The following dependencies are not part of DPDK and must be installed separately: + +* **NXP Linux SDK** + + NXP Linux software development kit (SDK) includes support for the family + of QorIQ® ARM-Architecture-based system on chip (SoC) processors + and corresponding boards. + + It includes the Linux board support packages (BSPs) for NXP SoCs, + a fully operational tool chain, kernel and board specific modules. + + SDK and related information can be obtained from: `NXP QorIQ SDK <http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX>`_. + +* **DPDK Helper Scripts** + + DPAA2 based resources can be configured easily with the help of ready scripts + as provided in the DPDK helper repository. + + `DPDK Helper Scripts <https://github.com/qoriq-open-source/dpdk-helper>`_. + +Currently supported by DPDK: + +* NXP SDK **2.0+**. +* MC Firmware version **10.0.0** and higher. +* Supported architectures: **arm64 LE**. + +* Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup the basic DPDK environment. + +Pre-Installation Configuration +------------------------------ + +Config File Options +~~~~~~~~~~~~~~~~~~~ + +Basic DPAA2 config file options are described in :ref:`dpaa2_overview`. +In addition to those, the following options can be modified in the ``config`` file +to enable DPAA2_SEC PMD. + +Please note that enabling debugging options may affect system performance. + +* ``CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC`` (default ``n``) + By default it is only enabled in defconfig_arm64-dpaa2-* config. + Toggle compilation of the ``librte_pmd_dpaa2_sec`` driver. + +* ``CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_INIT`` (default ``n``) + Toggle display of initialization related driver messages + +* ``CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_DRIVER`` (default ``n``) + Toggle display of driver runtime messages + +* ``CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_RX`` (default ``n``) + Toggle display of receive fast path run-time message + +* ``CONFIG_RTE_DPAA2_SEC_PMD_MAX_NB_SESSIONS`` + By default it is set as 2048 in defconfig_arm64-dpaa2-* config. + It indicates Number of sessions to create in the session memory pool + on a single DPAA2 SEC device. + +Installations +------------- +To compile the DPAA2_SEC PMD for Linux arm64 gcc target, run the +following ``make`` command: + +.. code-block:: console + + cd <DPDK-source-directory> + make config T=arm64-dpaa2-linuxapp-gcc install diff --git a/doc/guides/cryptodevs/features/aesni_gcm.ini b/doc/guides/cryptodevs/features/aesni_gcm.ini new file mode 100644 index 00000000..5d9e119d --- /dev/null +++ b/doc/guides/cryptodevs/features/aesni_gcm.ini @@ -0,0 +1,27 @@ +; +; Supported features of the 'aesni_gcm' crypto driver. +; +; Refer to default.ini for the full list of available PMD features. +; +[Features] +Symmetric crypto = Y +Sym operation chaining = Y +CPU AESNI = Y + +; +; Supported crypto algorithms of the 'aesni_gcm' crypto driver. +; +[Cipher] + +; +; Supported authentication algorithms of the 'aesni_gcm' crypto driver. +; +[Auth] +AES GMAC = Y + +; +; Supported AEAD algorithms of the 'aesni_gcm' crypto driver. +; +[AEAD] +AES GCM (128) = Y +AES GCM (256) = Y diff --git a/doc/guides/cryptodevs/features/aesni_mb.ini b/doc/guides/cryptodevs/features/aesni_mb.ini new file mode 100644 index 00000000..03d8485d --- /dev/null +++ b/doc/guides/cryptodevs/features/aesni_mb.ini @@ -0,0 +1,41 @@ +; +; Supported features of the 'aesni_mb' crypto driver. +; +; Refer to default.ini for the full list of available PMD features. +; +[Features] +Symmetric crypto = Y +Sym operation chaining = Y +CPU SSE = Y +CPU AVX = Y +CPU AVX2 = Y +CPU AVX512 = Y +CPU AESNI = Y + +; +; Supported crypto algorithms of the 'aesni_mb' crypto driver. +; +[Cipher] +AES CBC (128) = Y +AES CBC (192) = Y +AES CBC (256) = Y +AES CTR (128) = Y +AES CTR (192) = Y +AES CTR (256) = Y +AES DOCSIS BPI = Y +; +; Supported authentication algorithms of the 'aesni_mb' crypto driver. +; +[Auth] +MD5 HMAC = Y +SHA1 HMAC = Y +SHA224 HMAC = Y +SHA256 HMAC = Y +SHA384 HMAC = Y +SHA512 HMAC = Y +AES XCBC MAC = Y + +; +; Supported AEAD algorithms of the 'aesni_mb' crypto driver. +; +[AEAD] diff --git a/doc/guides/cryptodevs/features/armv8.ini b/doc/guides/cryptodevs/features/armv8.ini new file mode 100644 index 00000000..1e104771 --- /dev/null +++ b/doc/guides/cryptodevs/features/armv8.ini @@ -0,0 +1,28 @@ +; +; Supported features of the 'armv8' crypto driver. +; +; Refer to default.ini for the full list of available PMD features. +; +[Features] +Symmetric crypto = Y +Sym operation chaining = Y +CPU NEON = Y +CPU ARM CE = Y + +; +; Supported crypto algorithms of the 'armv8' crypto driver. +; +[Cipher] +AES CBC (128) = Y + +; +; Supported authentication algorithms of the 'armv8' crypto driver. +; +[Auth] +SHA1 HMAC = Y +SHA256 HMAC = Y + +; +; Supported AEAD algorithms of the 'armv8' crypto driver. +; +[AEAD] diff --git a/doc/guides/cryptodevs/features/default.ini b/doc/guides/cryptodevs/features/default.ini new file mode 100644 index 00000000..0926887b --- /dev/null +++ b/doc/guides/cryptodevs/features/default.ini @@ -0,0 +1,70 @@ +; +; Features of a default crypto driver. +; +; This file defines the features that are valid for inclusion in +; the other driver files and also the order that they appear in +; the features table in the documentation. +; +[Features] +Symmetric crypto = +Asymmetric crypto = +Sym operation chaining = +HW Accelerated = +CPU SSE = +CPU AVX = +CPU AVX2 = +CPU AVX512 = +CPU AESNI = +CPU NEON = +CPU ARM CE = + +; +; Supported crypto algorithms of a default crypto driver. +; +[Cipher] +NULL = +AES CBC (128) = +AES CBC (192) = +AES CBC (256) = +AES CTR (128) = +AES CTR (192) = +AES CTR (256) = +AES DOCSIS BPI = +3DES CBC = +3DES CTR = +DES CBC = +DES DOCSIS BPI = +SNOW3G UEA2 = +KASUMI F8 = +ZUC EEA3 = + +; +; Supported authentication algorithms of a default crypto driver. +; +[Auth] +NULL = +MD5 = +MD5 HMAC = +SHA1 = +SHA1 HMAC = +SHA224 = +SHA224 HMAC = +SHA256 = +SHA256 HMAC = +SHA384 = +SHA384 HMAC = +SHA512 = +SHA512 HMAC = +AES XCBC MAC = +AES GMAC = +SNOW3G UIA2 = +KASUMI F9 = +ZUC EIA3 = + +; +; Supported AEAD algorithms of a default crypto driver. +; +[AEAD] +AES GCM (128) = +AES GCM (192) = +AES GCM (256) = diff --git a/doc/guides/cryptodevs/features/dpaa2_sec.ini b/doc/guides/cryptodevs/features/dpaa2_sec.ini new file mode 100644 index 00000000..db0ea4f9 --- /dev/null +++ b/doc/guides/cryptodevs/features/dpaa2_sec.ini @@ -0,0 +1,34 @@ +; +; Supported features of the 'dpaa2_sec' crypto driver. +; +; Refer to default.ini for the full list of available PMD features. +; +[Features] +Symmetric crypto = Y +Sym operation chaining = Y +HW Accelerated = Y + +; +; Supported crypto algorithms of the 'dpaa2_sec' crypto driver. +; +[Cipher] +AES CBC (128) = Y +AES CBC (192) = Y +AES CBC (256) = Y +3DES CBC = Y + +; +; Supported authentication algorithms of the 'dpaa2_sec' crypto driver. +; +[Auth] +MD5 HMAC = Y +SHA1 HMAC = Y +SHA224 HMAC = Y +SHA256 HMAC = Y +SHA384 HMAC = Y +SHA512 HMAC = Y + +; +; Supported AEAD algorithms of the 'openssl' crypto driver. +; +[AEAD] diff --git a/doc/guides/cryptodevs/features/kasumi.ini b/doc/guides/cryptodevs/features/kasumi.ini new file mode 100644 index 00000000..0e138f5a --- /dev/null +++ b/doc/guides/cryptodevs/features/kasumi.ini @@ -0,0 +1,24 @@ +; +; Supported features of the 'kasumi' crypto driver. +; +; Refer to default.ini for the full list of available PMD features. +; +[Features] +Symmetric crypto = Y +Sym operation chaining = Y + +; +; Supported crypto algorithms of the 'kasumi' crypto driver. +; +[Cipher] +KASUMI F8 = Y +; +; Supported authentication algorithms of the 'kasumi' crypto driver. +; +[Auth] +KASUMI F9 = Y + +; +; Supported AEAD algorithms of the 'kasumi' crypto driver. +; +[AEAD] diff --git a/doc/guides/cryptodevs/features/null.ini b/doc/guides/cryptodevs/features/null.ini new file mode 100644 index 00000000..523c453c --- /dev/null +++ b/doc/guides/cryptodevs/features/null.ini @@ -0,0 +1,25 @@ +; +; Supported features of the 'null' crypto driver. +; +; Refer to default.ini for the full list of available PMD features. +; +[Features] +Symmetric crypto = Y +Sym operation chaining = Y + +; +; Supported crypto algorithms of the 'null' crypto driver. +; +[Cipher] +NULL = Y + +; +; Supported authentication algorithms of the 'null' crypto driver. +; +[Auth] +NULL = Y + +; +; Supported AEAD algorithms of the 'null' crypto driver. +; +[AEAD] diff --git a/doc/guides/cryptodevs/features/openssl.ini b/doc/guides/cryptodevs/features/openssl.ini new file mode 100644 index 00000000..aeb2a500 --- /dev/null +++ b/doc/guides/cryptodevs/features/openssl.ini @@ -0,0 +1,47 @@ +; +; Supported features of the 'openssl' crypto driver. +; +; Refer to default.ini for the full list of available PMD features. +; +[Features] +Symmetric crypto = Y +Sym operation chaining = Y + +; +; Supported crypto algorithms of the 'openssl' crypto driver. +; +[Cipher] +AES CBC (128) = Y +AES CBC (192) = Y +AES CBC (256) = Y +AES CTR (128) = Y +AES CTR (192) = Y +AES CTR (256) = Y +3DES CBC = Y +3DES CTR = Y +DES DOCSIS BPI = Y +; +; Supported authentication algorithms of the 'openssl' crypto driver. +; +[Auth] +MD5 = Y +MD5 HMAC = Y +SHA1 = Y +SHA1 HMAC = Y +SHA224 = Y +SHA224 HMAC = Y +SHA256 = Y +SHA256 HMAC = Y +SHA384 = Y +SHA384 HMAC = Y +SHA512 = Y +SHA512 HMAC = Y +AES GMAC = Y + +; +; Supported AEAD algorithms of the 'openssl' crypto driver. +; +[AEAD] +AES GCM (128) = Y +AES GCM (192) = Y +AES GCM (256) = Y diff --git a/doc/guides/cryptodevs/features/qat.ini b/doc/guides/cryptodevs/features/qat.ini new file mode 100644 index 00000000..40da8985 --- /dev/null +++ b/doc/guides/cryptodevs/features/qat.ini @@ -0,0 +1,53 @@ +; +; Supported features of the 'qat' crypto driver. +; +; Refer to default.ini for the full list of available PMD features. +; +[Features] +Symmetric crypto = Y +Sym operation chaining = Y +HW Accelerated = Y + +; +; Supported crypto algorithms of the 'qat' crypto driver. +; +[Cipher] +NULL = Y +AES CBC (128) = Y +AES CBC (192) = Y +AES CBC (256) = Y +AES CTR (128) = Y +AES CTR (192) = Y +AES CTR (256) = Y +3DES CBC = Y +3DES CTR = Y +DES CBC = Y +SNOW3G UEA2 = Y +KASUMI F8 = Y +AES DOCSIS BPI = Y +DES DOCSIS BPI = Y +ZUC EEA3 = Y +; +; Supported authentication algorithms of the 'qat' crypto driver. +; +[Auth] +NULL = Y +MD5 HMAC = Y +SHA1 HMAC = Y +SHA224 HMAC = Y +SHA256 HMAC = Y +SHA384 HMAC = Y +SHA512 HMAC = Y +AES GMAC = Y +SNOW3G UIA2 = Y +KASUMI F9 = Y +AES XCBC MAC = Y +ZUC EIA3 = Y + +; +; Supported AEAD algorithms of the 'qat' crypto driver. +; +[AEAD] +AES GCM (128) = Y +AES GCM (192) = Y +AES GCM (256) = Y diff --git a/doc/guides/cryptodevs/features/snow3g.ini b/doc/guides/cryptodevs/features/snow3g.ini new file mode 100644 index 00000000..27713617 --- /dev/null +++ b/doc/guides/cryptodevs/features/snow3g.ini @@ -0,0 +1,24 @@ +; +; Supported features of the 'snow3g' crypto driver. +; +; Refer to default.ini for the full list of available PMD features. +; +[Features] +Symmetric crypto = Y +Sym operation chaining = Y + +; +; Supported crypto algorithms of the 'snow3g' crypto driver. +; +[Cipher] +SNOW3G UEA2 = Y +; +; Supported authentication algorithms of the 'snow3g' crypto driver. +; +[Auth] +SNOW3G UIA2 = Y + +; +; Supported AEAD algorithms of the 'snow3g' crypto driver. +; +[AEAD] diff --git a/doc/guides/cryptodevs/features/zuc.ini b/doc/guides/cryptodevs/features/zuc.ini new file mode 100644 index 00000000..5bb02afd --- /dev/null +++ b/doc/guides/cryptodevs/features/zuc.ini @@ -0,0 +1,24 @@ +; +; Supported features of the 'zuc' crypto driver. +; +; Refer to default.ini for the full list of available PMD features. +; +[Features] +Symmetric crypto = Y +Sym operation chaining = Y + +; +; Supported crypto algorithms of the 'zuc' crypto driver. +; +[Cipher] +ZUC EEA3 = Y +; +; Supported authentication algorithms of the 'zuc' crypto driver. +; +[Auth] +ZUC EIA3 = Y + +; +; Supported AEAD algorithms of the 'zuc' crypto driver. +; +[AEAD] diff --git a/doc/guides/cryptodevs/img/scheduler-overview.svg b/doc/guides/cryptodevs/img/scheduler-overview.svg new file mode 100644 index 00000000..82bb775b --- /dev/null +++ b/doc/guides/cryptodevs/img/scheduler-overview.svg @@ -0,0 +1,277 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.1//EN" "http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd"> +<!-- Generated by Microsoft Visio, SVG Export scheduler-fan.svg Page-1 --> +<svg xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:ev="http://www.w3.org/2001/xml-events" + xmlns:v="http://schemas.microsoft.com/visio/2003/SVGExtensions/" width="6.81229in" height="3.40992in" + viewBox="0 0 490.485 245.514" xml:space="preserve" color-interpolation-filters="sRGB" class="st10"> + <v:documentProperties v:langID="1033" v:metric="true" v:viewMarkup="false"/> + + <style type="text/css"> + <![CDATA[ + .st1 {visibility:visible} + .st2 {fill:#fec000;fill-opacity:0.25;filter:url(#filter_2);stroke:#fec000;stroke-opacity:0.25} + .st3 {fill:#cc3399;stroke:#ff8c00;stroke-width:3} + .st4 {fill:#ffffff;font-family:Calibri;font-size:1.33333em} + .st5 {fill:#ff9900;stroke:#ff8c00;stroke-width:3} + .st6 {fill:#ffffff;font-family:Calibri;font-size:1.33333em;font-weight:bold} + .st7 {fill:#ffc000;stroke:#ffffff;stroke-linecap:round;stroke-linejoin:round;stroke-width:0.5} + .st8 {marker-end:url(#mrkr4-40);stroke:#ff0000;stroke-linecap:round;stroke-linejoin:round;stroke-width:1.5} + .st9 {fill:#ff0000;fill-opacity:1;stroke:#ff0000;stroke-opacity:1;stroke-width:0.37313432835821} + .st10 {fill:none;fill-rule:evenodd;font-size:12px;overflow:visible;stroke-linecap:square;stroke-miterlimit:3} + ]]> + </style> + + <defs id="Markers"> + <g id="lend4"> + <path d="M 2 1 L 0 0 L 2 -1 L 2 1 " style="stroke:none"/> + </g> + <marker id="mrkr4-40" class="st9" v:arrowType="4" v:arrowSize="2" v:setback="5.36" refX="-5.36" orient="auto" + markerUnits="strokeWidth" overflow="visible"> + <use xlink:href="#lend4" transform="scale(-2.68,-2.68) "/> + </marker> + </defs> + <defs id="Filters"> + <filter id="filter_2"> + <feGaussianBlur stdDeviation="2"/> + </filter> + </defs> + <g v:mID="0" v:index="1" v:groupContext="foregroundPage"> + <title>Page-1</title> + <v:pageProperties v:drawingScale="0.0393701" v:pageScale="0.0393701" v:drawingUnits="24" v:shadowOffsetX="8.50394" + v:shadowOffsetY="-8.50394"/> + <v:layer v:name="Connector" v:index="0"/> + <g id="shape31-1" v:mID="31" v:groupContext="shape" transform="translate(4.15435,-179.702)"> + <title>Rounded Rectangle.55</title> + <desc>User Application</desc> + <v:userDefs> + <v:ud v:nameU="CTypeTopLeftSnip" v:prompt="" v:val="VT0(0):5"/> + <v:ud v:nameU="CTypeTopRightSnip" v:prompt="" v:val="VT0(0):5"/> + <v:ud v:nameU="CTypeBotLeftSnip" v:prompt="" v:val="VT0(0):5"/> + <v:ud v:nameU="CTypeBotRightSnip" v:prompt="" v:val="VT0(0):5"/> + <v:ud v:nameU="CornerLockHoriz" v:prompt="" v:val="VT0(1):5"/> + <v:ud v:nameU="CornerLockVert" v:prompt="" v:val="VT0(1):5"/> + <v:ud v:nameU="CornerLockDiag" v:prompt="" v:val="VT0(0):5"/> + <v:ud v:nameU="TopLeftOffset" v:prompt="" v:val="VT0(0.15748031496063):24"/> + <v:ud v:nameU="TopRightOffset" v:prompt="" v:val="VT0(0.15748031496063):24"/> + <v:ud v:nameU="BotLeftOffset" v:prompt="" v:val="VT0(0.15748031496063):24"/> + <v:ud v:nameU="BotRightOffset" v:prompt="" v:val="VT0(0.15748031496063):24"/> + <v:ud v:nameU="visVersion" v:prompt="" v:val="VT0(15):26"/> + <v:ud v:nameU="TopLeftOffset" v:prompt="" v:val="VT0(0.15348434426561):1"/> + <v:ud v:nameU="TopRightOffset" v:prompt="" v:val="VT0(0.15348434426561):1"/> + <v:ud v:nameU="BotLeftOffset" v:prompt="" v:val="VT0(0.15348434426561):1"/> + <v:ud v:nameU="BotRightOffset" v:prompt="" v:val="VT0(0.15348434426561):1"/> + <v:ud v:nameU="msvThemeColors" v:val="VT0(254):26"/> + </v:userDefs> + <v:textBlock v:margins="rect(4,4,4,4)" v:tabSpace="42.5197"/> + <v:textRect cx="240.743" cy="214.108" width="481.49" height="62.8119"/> + <g id="shadow31-2" v:groupContext="shadow" v:shadowOffsetX="0.3456" v:shadowOffsetY="-1.9728" v:shadowType="1" + transform="matrix(1,0,0,1,0.3456,1.9728)" class="st1"> + <path d="M11.05 245.51 L470.43 245.51 A11.0507 11.0507 -180 0 0 481.49 234.46 L481.49 193.75 A11.0507 11.0507 -180 + 0 0 470.43 182.7 L11.05 182.7 A11.0507 11.0507 -180 0 0 -0 193.75 L0 234.46 A11.0507 11.0507 -180 0 + 0 11.05 245.51 Z" class="st2"/> + </g> + <path d="M11.05 245.51 L470.43 245.51 A11.0507 11.0507 -180 0 0 481.49 234.46 L481.49 193.75 A11.0507 11.0507 -180 0 + 0 470.43 182.7 L11.05 182.7 A11.0507 11.0507 -180 0 0 -0 193.75 L0 234.46 A11.0507 11.0507 -180 0 0 11.05 + 245.51 Z" class="st3"/> + <text x="187.04" y="218.91" class="st4" v:langID="1033"><v:paragraph v:horizAlign="1"/><v:tabList/>User Application</text> </g> + <g id="shape135-7" v:mID="135" v:groupContext="shape" transform="translate(4.15435,-6.4728)"> + <title>Rounded Rectangle.135</title> + <desc>Cryptodev</desc> + <v:userDefs> + <v:ud v:nameU="CTypeTopLeftSnip" v:prompt="" v:val="VT0(0):5"/> + <v:ud v:nameU="CTypeTopRightSnip" v:prompt="" v:val="VT0(0):5"/> + <v:ud v:nameU="CTypeBotLeftSnip" v:prompt="" v:val="VT0(0):5"/> + <v:ud v:nameU="CTypeBotRightSnip" v:prompt="" v:val="VT0(0):5"/> + <v:ud v:nameU="CornerLockHoriz" v:prompt="" v:val="VT0(1):5"/> + <v:ud v:nameU="CornerLockVert" v:prompt="" v:val="VT0(1):5"/> + <v:ud v:nameU="CornerLockDiag" v:prompt="" v:val="VT0(0):5"/> + <v:ud v:nameU="TopLeftOffset" v:prompt="" v:val="VT0(0.15748031496063):24"/> + <v:ud v:nameU="TopRightOffset" v:prompt="" v:val="VT0(0.15748031496063):24"/> + <v:ud v:nameU="BotLeftOffset" v:prompt="" v:val="VT0(0.15748031496063):24"/> + <v:ud v:nameU="BotRightOffset" v:prompt="" v:val="VT0(0.15748031496063):24"/> + <v:ud v:nameU="visVersion" v:prompt="" v:val="VT0(15):26"/> + <v:ud v:nameU="TopLeftOffset" v:prompt="" v:val="VT0(0.045922865409173):1"/> + <v:ud v:nameU="TopRightOffset" v:prompt="" v:val="VT0(0.045922865409173):1"/> + <v:ud v:nameU="BotLeftOffset" v:prompt="" v:val="VT0(0.045922865409173):1"/> + <v:ud v:nameU="BotRightOffset" v:prompt="" v:val="VT0(0.045922865409173):1"/> + <v:ud v:nameU="msvThemeColors" v:val="VT0(254):26"/> + </v:userDefs> + <v:textBlock v:margins="rect(4,4,4,4)" v:tabSpace="42.5197"/> + <v:textRect cx="72.0307" cy="230.549" width="144.07" height="29.9308"/> + <g id="shadow135-8" v:groupContext="shadow" v:shadowOffsetX="0.3456" v:shadowOffsetY="-1.9728" v:shadowType="1" + transform="matrix(1,0,0,1,0.3456,1.9728)" class="st1"> + <path d="M3.31 245.51 L140.76 245.51 A3.30639 3.30639 -180 0 0 144.06 242.21 L144.06 218.89 A3.30639 3.30639 -180 + 0 0 140.76 215.58 L3.31 215.58 A3.30639 3.30639 -180 0 0 0 218.89 L0 242.21 A3.30639 3.30639 -180 0 + 0 3.31 245.51 Z" class="st2"/> + </g> + <path d="M3.31 245.51 L140.76 245.51 A3.30639 3.30639 -180 0 0 144.06 242.21 L144.06 218.89 A3.30639 3.30639 -180 0 0 + 140.76 215.58 L3.31 215.58 A3.30639 3.30639 -180 0 0 0 218.89 L0 242.21 A3.30639 3.30639 -180 0 0 3.31 245.51 + Z" class="st5"/> + <text x="38.46" y="235.35" class="st4" v:langID="1033"><v:paragraph v:horizAlign="1"/><v:tabList/>Cryptodev</text> </g> + <g id="shape136-13" v:mID="136" v:groupContext="shape" transform="translate(172.866,-6.4728)"> + <title>Rounded Rectangle.136</title> + <desc>Cryptodev</desc> + <v:userDefs> + <v:ud v:nameU="CTypeTopLeftSnip" v:prompt="" v:val="VT0(0):5"/> + <v:ud v:nameU="CTypeTopRightSnip" v:prompt="" v:val="VT0(0):5"/> + <v:ud v:nameU="CTypeBotLeftSnip" v:prompt="" v:val="VT0(0):5"/> + <v:ud v:nameU="CTypeBotRightSnip" v:prompt="" v:val="VT0(0):5"/> + <v:ud v:nameU="CornerLockHoriz" v:prompt="" v:val="VT0(1):5"/> + <v:ud v:nameU="CornerLockVert" v:prompt="" v:val="VT0(1):5"/> + <v:ud v:nameU="CornerLockDiag" v:prompt="" v:val="VT0(0):5"/> + <v:ud v:nameU="TopLeftOffset" v:prompt="" v:val="VT0(0.15748031496063):24"/> + <v:ud v:nameU="TopRightOffset" v:prompt="" v:val="VT0(0.15748031496063):24"/> + <v:ud v:nameU="BotLeftOffset" v:prompt="" v:val="VT0(0.15748031496063):24"/> + <v:ud v:nameU="BotRightOffset" v:prompt="" v:val="VT0(0.15748031496063):24"/> + <v:ud v:nameU="visVersion" v:prompt="" v:val="VT0(15):26"/> + <v:ud v:nameU="TopLeftOffset" v:prompt="" v:val="VT0(0.045922865409173):1"/> + <v:ud v:nameU="TopRightOffset" v:prompt="" v:val="VT0(0.045922865409173):1"/> + <v:ud v:nameU="BotLeftOffset" v:prompt="" v:val="VT0(0.045922865409173):1"/> + <v:ud v:nameU="BotRightOffset" v:prompt="" v:val="VT0(0.045922865409173):1"/> + <v:ud v:nameU="msvThemeColors" v:val="VT0(254):26"/> + </v:userDefs> + <v:textBlock v:margins="rect(4,4,4,4)" v:tabSpace="42.5197"/> + <v:textRect cx="72.0307" cy="230.549" width="144.07" height="29.9308"/> + <g id="shadow136-14" v:groupContext="shadow" v:shadowOffsetX="0.3456" v:shadowOffsetY="-1.9728" v:shadowType="1" + transform="matrix(1,0,0,1,0.3456,1.9728)" class="st1"> + <path d="M3.31 245.51 L140.76 245.51 A3.30639 3.30639 -180 0 0 144.06 242.21 L144.06 218.89 A3.30639 3.30639 -180 + 0 0 140.76 215.58 L3.31 215.58 A3.30639 3.30639 -180 0 0 0 218.89 L0 242.21 A3.30639 3.30639 -180 0 + 0 3.31 245.51 Z" class="st2"/> + </g> + <path d="M3.31 245.51 L140.76 245.51 A3.30639 3.30639 -180 0 0 144.06 242.21 L144.06 218.89 A3.30639 3.30639 -180 0 0 + 140.76 215.58 L3.31 215.58 A3.30639 3.30639 -180 0 0 0 218.89 L0 242.21 A3.30639 3.30639 -180 0 0 3.31 245.51 + Z" class="st5"/> + <text x="38.46" y="235.35" class="st4" v:langID="1033"><v:paragraph v:horizAlign="1"/><v:tabList/>Cryptodev</text> </g> + <g id="shape137-19" v:mID="137" v:groupContext="shape" transform="translate(341.578,-6.4728)"> + <title>Rounded Rectangle.137</title> + <desc>Cryptodev</desc> + <v:userDefs> + <v:ud v:nameU="CTypeTopLeftSnip" v:prompt="" v:val="VT0(0):5"/> + <v:ud v:nameU="CTypeTopRightSnip" v:prompt="" v:val="VT0(0):5"/> + <v:ud v:nameU="CTypeBotLeftSnip" v:prompt="" v:val="VT0(0):5"/> + <v:ud v:nameU="CTypeBotRightSnip" v:prompt="" v:val="VT0(0):5"/> + <v:ud v:nameU="CornerLockHoriz" v:prompt="" v:val="VT0(1):5"/> + <v:ud v:nameU="CornerLockVert" v:prompt="" v:val="VT0(1):5"/> + <v:ud v:nameU="CornerLockDiag" v:prompt="" v:val="VT0(0):5"/> + <v:ud v:nameU="TopLeftOffset" v:prompt="" v:val="VT0(0.15748031496063):24"/> + <v:ud v:nameU="TopRightOffset" v:prompt="" v:val="VT0(0.15748031496063):24"/> + <v:ud v:nameU="BotLeftOffset" v:prompt="" v:val="VT0(0.15748031496063):24"/> + <v:ud v:nameU="BotRightOffset" v:prompt="" v:val="VT0(0.15748031496063):24"/> + <v:ud v:nameU="visVersion" v:prompt="" v:val="VT0(15):26"/> + <v:ud v:nameU="TopLeftOffset" v:prompt="" v:val="VT0(0.045922865409173):1"/> + <v:ud v:nameU="TopRightOffset" v:prompt="" v:val="VT0(0.045922865409173):1"/> + <v:ud v:nameU="BotLeftOffset" v:prompt="" v:val="VT0(0.045922865409173):1"/> + <v:ud v:nameU="BotRightOffset" v:prompt="" v:val="VT0(0.045922865409173):1"/> + <v:ud v:nameU="msvThemeColors" v:val="VT0(254):26"/> + </v:userDefs> + <v:textBlock v:margins="rect(4,4,4,4)" v:tabSpace="42.5197"/> + <v:textRect cx="72.0307" cy="230.549" width="144.07" height="29.9308"/> + <g id="shadow137-20" v:groupContext="shadow" v:shadowOffsetX="0.3456" v:shadowOffsetY="-1.9728" v:shadowType="1" + transform="matrix(1,0,0,1,0.3456,1.9728)" class="st1"> + <path d="M3.31 245.51 L140.76 245.51 A3.30639 3.30639 -180 0 0 144.06 242.21 L144.06 218.89 A3.30639 3.30639 -180 + 0 0 140.76 215.58 L3.31 215.58 A3.30639 3.30639 -180 0 0 0 218.89 L0 242.21 A3.30639 3.30639 -180 0 + 0 3.31 245.51 Z" class="st2"/> + </g> + <path d="M3.31 245.51 L140.76 245.51 A3.30639 3.30639 -180 0 0 144.06 242.21 L144.06 218.89 A3.30639 3.30639 -180 0 0 + 140.76 215.58 L3.31 215.58 A3.30639 3.30639 -180 0 0 0 218.89 L0 242.21 A3.30639 3.30639 -180 0 0 3.31 245.51 + Z" class="st5"/> + <text x="38.46" y="235.35" class="st4" v:langID="1033"><v:paragraph v:horizAlign="1"/><v:tabList/>Cryptodev</text> </g> + <g id="group139-25" transform="translate(4.15435,-66.8734)" v:mID="139" v:groupContext="group"> + <title>Sheet.139</title> + <g id="shape33-26" v:mID="33" v:groupContext="shape"> + <title>Rounded Rectangle.40</title> + <desc>Cryptodev Scheduler</desc> + <v:userDefs> + <v:ud v:nameU="CTypeTopLeftSnip" v:prompt="" v:val="VT0(0):5"/> + <v:ud v:nameU="CTypeTopRightSnip" v:prompt="" v:val="VT0(0):5"/> + <v:ud v:nameU="CTypeBotLeftSnip" v:prompt="" v:val="VT0(0):5"/> + <v:ud v:nameU="CTypeBotRightSnip" v:prompt="" v:val="VT0(0):5"/> + <v:ud v:nameU="CornerLockHoriz" v:prompt="" v:val="VT0(1):5"/> + <v:ud v:nameU="CornerLockVert" v:prompt="" v:val="VT0(1):5"/> + <v:ud v:nameU="CornerLockDiag" v:prompt="" v:val="VT0(0):5"/> + <v:ud v:nameU="TopLeftOffset" v:prompt="" v:val="VT0(0.15748031496063):24"/> + <v:ud v:nameU="TopRightOffset" v:prompt="" v:val="VT0(0.15748031496063):24"/> + <v:ud v:nameU="BotLeftOffset" v:prompt="" v:val="VT0(0.15748031496063):24"/> + <v:ud v:nameU="BotRightOffset" v:prompt="" v:val="VT0(0.15748031496063):24"/> + <v:ud v:nameU="visVersion" v:prompt="" v:val="VT0(15):26"/> + <v:ud v:nameU="TopLeftOffset" v:prompt="" v:val="VT0(0.15348434426561):1"/> + <v:ud v:nameU="TopRightOffset" v:prompt="" v:val="VT0(0.15348434426561):1"/> + <v:ud v:nameU="BotLeftOffset" v:prompt="" v:val="VT0(0.15348434426561):1"/> + <v:ud v:nameU="BotRightOffset" v:prompt="" v:val="VT0(0.15348434426561):1"/> + <v:ud v:nameU="msvThemeColors" v:val="VT0(254):26"/> + </v:userDefs> + <v:textBlock v:margins="rect(4,4,4,4)" v:tabSpace="42.5197" v:verticalAlign="0"/> + <v:textRect cx="240.743" cy="204.056" width="481.49" height="82.916"/> + <g id="shadow33-27" v:groupContext="shadow" v:shadowOffsetX="0.3456" v:shadowOffsetY="-1.9728" v:shadowType="1" + transform="matrix(1,0,0,1,0.3456,1.9728)" class="st1"> + <path d="M11.05 245.51 L470.43 245.51 A11.0507 11.0507 -180 0 0 481.49 234.46 L481.49 173.65 A11.0507 11.0507 + -180 0 0 470.43 162.6 L11.05 162.6 A11.0507 11.0507 -180 0 0 0 173.65 L0 234.46 A11.0507 11.0507 + -180 0 0 11.05 245.51 Z" class="st2"/> + </g> + <path d="M11.05 245.51 L470.43 245.51 A11.0507 11.0507 -180 0 0 481.49 234.46 L481.49 173.65 A11.0507 11.0507 -180 + 0 0 470.43 162.6 L11.05 162.6 A11.0507 11.0507 -180 0 0 0 173.65 L0 234.46 A11.0507 11.0507 -180 0 0 + 11.05 245.51 Z" class="st5"/> + <text x="171.72" y="181" class="st6" v:langID="1033"><v:paragraph v:horizAlign="1"/><v:tabList/>Cryptodev Scheduler</text> </g> + <g id="shape138-32" v:mID="138" v:groupContext="shape" transform="translate(24.6009,-12.5889)"> + <title>Rounded Rectangle.138</title> + <desc>Crypto Op Distribution Mechanism</desc> + <v:userDefs> + <v:ud v:nameU="CTypeTopLeftSnip" v:prompt="" v:val="VT0(0):5"/> + <v:ud v:nameU="CTypeTopRightSnip" v:prompt="" v:val="VT0(0):5"/> + <v:ud v:nameU="CTypeBotLeftSnip" v:prompt="" v:val="VT0(0):5"/> + <v:ud v:nameU="CTypeBotRightSnip" v:prompt="" v:val="VT0(0):5"/> + <v:ud v:nameU="CornerLockHoriz" v:prompt="" v:val="VT0(1):5"/> + <v:ud v:nameU="CornerLockVert" v:prompt="" v:val="VT0(1):5"/> + <v:ud v:nameU="CornerLockDiag" v:prompt="" v:val="VT0(0):5"/> + <v:ud v:nameU="TopLeftOffset" v:prompt="" v:val="VT0(0.15748031496063):24"/> + <v:ud v:nameU="TopRightOffset" v:prompt="" v:val="VT0(0.15748031496063):24"/> + <v:ud v:nameU="BotLeftOffset" v:prompt="" v:val="VT0(0.15748031496063):24"/> + <v:ud v:nameU="BotRightOffset" v:prompt="" v:val="VT0(0.15748031496063):24"/> + <v:ud v:nameU="visVersion" v:prompt="" v:val="VT0(15):26"/> + <v:ud v:nameU="TopLeftOffset" v:prompt="" v:val="VT0(0.13780016666367):1"/> + <v:ud v:nameU="TopRightOffset" v:prompt="" v:val="VT0(0.13780016666367):1"/> + <v:ud v:nameU="BotLeftOffset" v:prompt="" v:val="VT0(0.13780016666367):1"/> + <v:ud v:nameU="BotRightOffset" v:prompt="" v:val="VT0(0.13780016666367):1"/> + <v:ud v:nameU="msvThemeColors" v:val="VT0(254):26"/> + </v:userDefs> + <v:textBlock v:margins="rect(4,4,4,4)" v:tabSpace="42.5197"/> + <v:textRect cx="216.142" cy="230.549" width="432.29" height="29.9308"/> + <path d="M9.92 245.51 L422.36 245.51 A9.92145 9.92145 -180 0 0 432.28 235.59 L432.28 225.51 A9.92145 9.92145 -180 + 0 0 422.36 215.58 L9.92 215.58 A9.92145 9.92145 -180 0 0 0 225.51 L0 235.59 A9.92145 9.92145 -180 0 + 0 9.92 245.51 Z" class="st7"/> + <text x="103.11" y="235.35" class="st4" v:langID="1033"><v:paragraph v:horizAlign="1"/><v:tabList/>Crypto Op Distribution Mechanism</text> </g> + </g> + <g id="shape140-35" v:mID="140" v:groupContext="shape" v:layerMember="0" transform="translate(234.378,-149.789)"> + <title>Dynamic connector.229</title> + <path d="M7.09 245.51 L7.09 223.64" class="st8"/> + </g> + <g id="shape141-41" v:mID="141" v:groupContext="shape" v:layerMember="0" transform="translate(248.551,-179.702)"> + <title>Dynamic connector.141</title> + <path d="M7.09 245.51 L7.09 267.39" class="st8"/> + </g> + <g id="shape142-46" v:mID="142" v:groupContext="shape" v:layerMember="0" transform="translate(71.3856,-35.6203)"> + <title>Dynamic connector.142</title> + <path d="M7.09 245.51 L7.09 223.64" class="st8"/> + </g> + <g id="shape143-51" v:mID="143" v:groupContext="shape" v:layerMember="0" transform="translate(85.5588,-65.5333)"> + <title>Dynamic connector.143</title> + <path d="M7.09 245.51 L7.09 267.39" class="st8"/> + </g> + <g id="shape144-56" v:mID="144" v:groupContext="shape" v:layerMember="0" transform="translate(234.378,-35.6203)"> + <title>Dynamic connector.144</title> + <path d="M7.09 245.51 L7.09 223.64" class="st8"/> + </g> + <g id="shape145-61" v:mID="145" v:groupContext="shape" v:layerMember="0" transform="translate(248.551,-65.5333)"> + <title>Dynamic connector.145</title> + <path d="M7.09 245.51 L7.09 267.39" class="st8"/> + </g> + <g id="shape146-66" v:mID="146" v:groupContext="shape" v:layerMember="0" transform="translate(397.37,-34.837)"> + <title>Dynamic connector.146</title> + <path d="M7.09 245.51 L7.09 223.64" class="st8"/> + </g> + <g id="shape147-71" v:mID="147" v:groupContext="shape" v:layerMember="0" transform="translate(411.543,-64.75)"> + <title>Dynamic connector.147</title> + <path d="M7.09 245.51 L7.09 267.39" class="st8"/> + </g> + </g> +</svg> diff --git a/doc/guides/cryptodevs/index.rst b/doc/guides/cryptodevs/index.rst index a6a9f23c..361b82dd 100644 --- a/doc/guides/cryptodevs/index.rst +++ b/doc/guides/cryptodevs/index.rst @@ -1,5 +1,5 @@ .. BSD LICENSE - Copyright(c) 2015 - 2016 Intel Corporation. All rights reserved. + Copyright(c) 2015 - 2017 Intel Corporation. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions @@ -38,9 +38,12 @@ Crypto Device Drivers overview aesni_mb aesni_gcm + armv8 + dpaa2_sec kasumi openssl null + scheduler snow3g qat zuc diff --git a/doc/guides/cryptodevs/kasumi.rst b/doc/guides/cryptodevs/kasumi.rst index 90d8e7b3..bff9321e 100644 --- a/doc/guides/cryptodevs/kasumi.rst +++ b/doc/guides/cryptodevs/kasumi.rst @@ -90,9 +90,9 @@ In order to enable this virtual crypto PMD, user must: To use the PMD in an application, user must: -* Call rte_eal_vdev_init("crypto_kasumi") within the application. +* Call rte_vdev_init("crypto_kasumi") within the application. -* Use --vdev="crypto_kasumi" in the EAL options, which will call rte_eal_vdev_init() internally. +* Use --vdev="crypto_kasumi" in the EAL options, which will call rte_vdev_init() internally. The following parameters (all optional) can be provided in the previous two calls: @@ -107,4 +107,4 @@ Example: .. code-block:: console - ./l2fwd-crypto -c 40 -n 4 --vdev="crypto_kasumi,socket_id=1,max_nb_sessions=128" + ./l2fwd-crypto -l 6 -n 4 --vdev="crypto_kasumi,socket_id=1,max_nb_sessions=128" diff --git a/doc/guides/cryptodevs/null.rst b/doc/guides/cryptodevs/null.rst index ec5bc70d..4a3bfdfd 100644 --- a/doc/guides/cryptodevs/null.rst +++ b/doc/guides/cryptodevs/null.rst @@ -76,9 +76,9 @@ Initialization To use the PMD in an application, user must: -* Call rte_eal_vdev_init("crypto_null") within the application. +* Call rte_vdev_init("crypto_null") within the application. -* Use --vdev="crypto_null" in the EAL options, which will call rte_eal_vdev_init() internally. +* Use --vdev="crypto_null" in the EAL options, which will call rte_vdev_init() internally. The following parameters (all optional) can be provided in the previous two calls: @@ -93,4 +93,4 @@ Example: .. code-block:: console - ./l2fwd-crypto -c 40 -n 4 --vdev="crypto_null,socket_id=1,max_nb_sessions=128" + ./l2fwd-crypto -l 6 -n 4 --vdev="crypto_null,socket_id=1,max_nb_sessions=128" diff --git a/doc/guides/cryptodevs/openssl.rst b/doc/guides/cryptodevs/openssl.rst index f1c39bac..e3419151 100644 --- a/doc/guides/cryptodevs/openssl.rst +++ b/doc/guides/cryptodevs/openssl.rst @@ -49,6 +49,7 @@ Supported cipher algorithms: * ``RTE_CRYPTO_CIPHER_AES_CTR`` * ``RTE_CRYPTO_CIPHER_3DES_CTR`` * ``RTE_CRYPTO_CIPHER_AES_GCM`` +* ``RTE_CRYPTO_CIPHER_DES_DOCSISBPI`` Supported authentication algorithms: * ``RTE_CRYPTO_AUTH_AES_GMAC`` @@ -98,7 +99,7 @@ To verify real traffic l2fwd-crypto example can be used with this command: .. code-block:: console - sudo ./build/l2fwd-crypto -c 0x3 -n 4 --vdev "crypto_openssl" + sudo ./build/l2fwd-crypto -l 0-1 -n 4 --vdev "crypto_openssl" --vdev "crypto_openssl"-- -p 0x3 --chain CIPHER_HASH --cipher_op ENCRYPT --cipher_algo AES_CBC --cipher_key 00:01:02:03:04:05:06:07:08:09:0a:0b:0c:0d:0e:0f @@ -112,6 +113,7 @@ Limitations ----------- * Maximum number of sessions is 2048. -* Chained mbufs are not supported. +* Chained mbufs are supported only for source mbuf (destination must be + contiguous). * Hash only is not supported for GCM and GMAC. * Cipher only is not supported for GCM and GMAC. diff --git a/doc/guides/cryptodevs/overview.rst b/doc/guides/cryptodevs/overview.rst index d612f71b..6764d0d9 100644 --- a/doc/guides/cryptodevs/overview.rst +++ b/doc/guides/cryptodevs/overview.rst @@ -1,5 +1,5 @@ .. BSD LICENSE - Copyright(c) 2016 Intel Corporation. All rights reserved. + Copyright(c) 2016-2017 Intel Corporation. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions @@ -11,7 +11,7 @@ notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - * Neither the name of Intel Corporation nor the names of its + * Neither the name of 6WIND S.A. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. @@ -28,68 +28,32 @@ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Crypto Device Supported Functionality Matrices ----------------------------------------------- +============================================== Supported Feature Flags +----------------------- -.. csv-table:: - :header: "Feature Flags", "qat", "null", "aesni_mb", "aesni_gcm", "snow3g", "kasumi" - :stub-columns: 1 +.. _table_crypto_pmd_features: - "RTE_CRYPTODEV_FF_SYMMETRIC_CRYPTO",x,x,x,x,x,x - "RTE_CRYPTODEV_FF_ASYMMETRIC_CRYPTO",,,,,, - "RTE_CRYPTODEV_FF_SYM_OPERATION_CHAINING",x,x,x,x,x,x - "RTE_CRYPTODEV_FF_CPU_SSE",,,x,x,x,x - "RTE_CRYPTODEV_FF_CPU_AVX",,,x,x,x,x - "RTE_CRYPTODEV_FF_CPU_AVX2",,,x,x,, - "RTE_CRYPTODEV_FF_CPU_AESNI",,,x,x,, - "RTE_CRYPTODEV_FF_HW_ACCELERATED",x,,,,, +.. include:: overview_feature_table.txt Supported Cipher Algorithms +--------------------------- -.. csv-table:: - :header: "Cipher Algorithms", "qat", "null", "aesni_mb", "aesni_gcm", "snow3g", "kasumi" - :stub-columns: 1 +.. _table_crypto_pmd_cipher_algos: - "NULL",,x,,,, - "AES_CBC_128",x,,x,,, - "AES_CBC_192",x,,x,,, - "AES_CBC_256",x,,x,,, - "AES_CTR_128",x,,x,,, - "AES_CTR_192",x,,x,,, - "AES_CTR_256",x,,x,,, - "SNOW3G_UEA2",x,,,,x, - "KASUMI_F8",,,,,,x +.. include:: overview_cipher_table.txt Supported Authentication Algorithms +----------------------------------- -.. csv-table:: - :header: "Cipher Algorithms", "qat", "null", "aesni_mb", "aesni_gcm", "snow3g", "kasumi" - :stub-columns: 1 - - "NONE",,x,,,, - "MD5",,,,,, - "MD5_HMAC",,,x,,, - "SHA1",,,,,, - "SHA1_HMAC",x,,x,,, - "SHA224",,,,,, - "SHA224_HMAC",,,x,,, - "SHA256",,,,,, - "SHA256_HMAC",x,,x,,, - "SHA384",,,,,, - "SHA384_HMAC",,,x,,, - "SHA512",,,,,, - "SHA512_HMAC",x,,x,,, - "AES_XCBC",x,,x,,, - "SNOW3G_UIA2",x,,,,x, - "KASUMI_F9",,,,,,x +.. _table_crypto_pmd_auth_algos: + +.. include:: overview_auth_table.txt Supported AEAD Algorithms +------------------------- -.. csv-table:: - :header: "AEAD Algorithms", "qat", "null", "aesni_mb", "aesni_gcm", "snow3g", "kasumi" - :stub-columns: 1 +.. _table_crypto_pmd_aead_algos: - "AES_GCM_128",x,,x,,, - "AES_GCM_192",x,,,,, - "AES_GCM_256",x,,,,, +.. include:: overview_aead_table.txt diff --git a/doc/guides/cryptodevs/qat.rst b/doc/guides/cryptodevs/qat.rst index 52a9ae35..21b56fc6 100644 --- a/doc/guides/cryptodevs/qat.rst +++ b/doc/guides/cryptodevs/qat.rst @@ -30,9 +30,13 @@ Intel(R) QuickAssist (QAT) Crypto Poll Mode Driver ================================================== -The QAT PMD provides poll mode crypto driver support for **Intel QuickAssist -Technology DH895xxC**, **Intel QuickAssist Technology C62x** and -**Intel QuickAssist Technology C3xxx** hardware accelerator. +The QAT PMD provides poll mode crypto driver support for the following +hardware accelerator devices: + +* ``Intel QuickAssist Technology DH895xCC`` +* ``Intel QuickAssist Technology C62x`` +* ``Intel QuickAssist Technology C3xxx`` +* ``Intel QuickAssist Technology D15xx`` Features @@ -54,6 +58,10 @@ Cipher algorithms: * ``RTE_CRYPTO_CIPHER_AES_GCM`` * ``RTE_CRYPTO_CIPHER_NULL`` * ``RTE_CRYPTO_CIPHER_KASUMI_F8`` +* ``RTE_CRYPTO_CIPHER_DES_CBC`` +* ``RTE_CRYPTO_CIPHER_AES_DOCSISBPI`` +* ``RTE_CRYPTO_CIPHER_DES_DOCSISBPI`` +* ``RTE_CRYPTO_CIPHER_ZUC_EEA3`` Hash algorithms: @@ -68,349 +76,291 @@ Hash algorithms: * ``RTE_CRYPTO_AUTH_NULL`` * ``RTE_CRYPTO_AUTH_KASUMI_F9`` * ``RTE_CRYPTO_AUTH_AES_GMAC`` +* ``RTE_CRYPTO_AUTH_ZUC_EIA3`` Limitations ----------- -* Chained mbufs are not supported. * Hash only is not supported except SNOW 3G UIA2 and KASUMI F9. -* Cipher only is not supported except SNOW 3G UEA2, KASUMI F8 and 3DES. * Only supports the session-oriented API implementation (session-less APIs are not supported). * SNOW 3G (UEA2) and KASUMI (F8) supported only if cipher length, cipher offset fields are byte-aligned. * SNOW 3G (UIA2) and KASUMI (F9) supported only if hash length, hash offset fields are byte-aligned. * No BSD support as BSD QAT kernel driver not available. +* ZUC EEA3/EIA3 is not supported by dh895xcc devices +* Maximum additional authenticated data (AAD) for GCM is 240 bytes long. Installation ------------ -To use the DPDK QAT PMD an SRIOV-enabled QAT kernel driver is required. The -VF devices exposed by this driver will be used by QAT PMD. - -To enable QAT in DPDK, follow the instructions mentioned in -http://dpdk.org/doc/guides/linux_gsg/build_dpdk.html +To enable QAT in DPDK, follow the instructions for modifying the compile-time +configuration file as described `here <http://dpdk.org/doc/guides/linux_gsg/build_dpdk.html>`_. -Quick instructions as follows: +Quick instructions are as follows: .. code-block:: console + cd to the top-level DPDK directory make config T=x86_64-native-linuxapp-gcc sed -i 's,\(CONFIG_RTE_LIBRTE_PMD_QAT\)=n,\1=y,' build/.config make -If you are running on kernel 4.4 or greater, see instructions for -`Installation using kernel.org driver`_ below. If you are on a kernel earlier -than 4.4, see `Installation using 01.org QAT driver`_. - -For **Intel QuickAssist Technology C62x** and **Intel QuickAssist Technology C3xxx** -device, kernel 4.5 or greater is needed. -See instructions for `Installation using kernel.org driver`_ below. - - -Installation using 01.org QAT driver ------------------------------------- - -NOTE: There is no driver available for **Intel QuickAssist Technology C62x** and -**Intel QuickAssist Technology C3xxx** devices on 01.org. - -Download the latest QuickAssist Technology Driver from `01.org -<https://01.org/packet-processing/intel%C2%AE-quickassist-technology-drivers-and-patches>`_ -Consult the *Getting Started Guide* at the same URL for further information. +To use the DPDK QAT PMD an SRIOV-enabled QAT kernel driver is required. The VF +devices exposed by this driver will be used by the QAT PMD. The devices and +available kernel drivers and device ids are : -The steps below assume you are: +.. _table_qat_pmds_drivers: -* Building on a platform with one ``DH895xCC`` device. -* Using package ``qatmux.l.2.3.0-34.tgz``. -* On Fedora21 kernel ``3.17.4-301.fc21.x86_64``. +.. table:: QAT devices and drivers -In the BIOS ensure that SRIOV is enabled and VT-d is disabled. + +----------+--------+---------------+------------+--------+---------+--------+------------+ + | Device | Driver | Kernel Module | Pci Driver | PF Did | Num PFs | Vf Did | VFs per PF | + +==========+========+===============+============+========+=========+========+============+ + | DH895xCC | 01.org | icp_qa_al | n/a | 435 | 1 | 443 | 32 | + +----------+--------+---------------+------------+--------+---------+--------+------------+ + | DH895xCC | 4.4+ | qat_dh895xcc | dh895xcc | 435 | 1 | 443 | 32 | + +----------+--------+---------------+------------+--------+---------+--------+------------+ + | C62x | 4.5+ | qat_c62x | c6xx | 37c8 | 3 | 37c9 | 16 | + +----------+--------+---------------+------------+--------+---------+--------+------------+ + | C3xxx | 4.5+ | qat_c3xxx | c3xxx | 19e2 | 1 | 19e3 | 16 | + +----------+--------+---------------+------------+--------+---------+--------+------------+ + | D15xx | p | qat_d15xx | d15xx | 6f54 | 1 | 6f55 | 16 | + +----------+--------+---------------+------------+--------+---------+--------+------------+ -Uninstall any existing QAT driver, for example by running: -* ``./installer.sh uninstall`` in the directory where originally installed. +The ``Driver`` column indicates either the Linux kernel version in which +support for this device was introduced or a driver available on Intel's 01.org +website. There are both linux and 01.org kernel drivers available for some +devices. p = release pending. -* or ``rmmod qat_dh895xcc; rmmod intel_qat``. - -Build and install the SRIOV-enabled QAT driver:: - - mkdir /QAT - cd /QAT - # copy qatmux.l.2.3.0-34.tgz to this location - tar zxof qatmux.l.2.3.0-34.tgz - - export ICP_WITHOUT_IOMMU=1 - ./installer.sh install QAT1.6 host - -You can use ``cat /proc/icp_dh895xcc_dev0/version`` to confirm the driver is correctly installed. -You can use ``lspci -d:443`` to confirm the bdf of the 32 VF devices are available per ``DH895xCC`` device. - -To complete the installation - follow instructions in `Binding the available VFs to the DPDK UIO driver`_. - -**Note**: If using a later kernel and the build fails with an error relating to ``strict_stroul`` not being available apply the following patch: - -.. code-block:: diff - - /QAT/QAT1.6/quickassist/utilities/downloader/Target_CoreLibs/uclo/include/linux/uclo_platform.h - + #if LINUX_VERSION_CODE >= KERNEL_VERSION(3,18,5) - + #define STR_TO_64(str, base, num, endPtr) {endPtr=NULL; if (kstrtoul((str), (base), (num))) printk("Error strtoull convert %s\n", str); } - + #else - #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38) - #define STR_TO_64(str, base, num, endPtr) {endPtr=NULL; if (strict_strtoull((str), (base), (num))) printk("Error strtoull convert %s\n", str); } - #else - #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25) - #define STR_TO_64(str, base, num, endPtr) {endPtr=NULL; strict_strtoll((str), (base), (num));} - #else - #define STR_TO_64(str, base, num, endPtr) \ - do { \ - if (str[0] == '-') \ - { \ - *(num) = -(simple_strtoull((str+1), &(endPtr), (base))); \ - }else { \ - *(num) = simple_strtoull((str), &(endPtr), (base)); \ - } \ - } while(0) - + #endif - #endif - #endif - - -If the build fails due to missing header files you may need to do following: - -* ``sudo yum install zlib-devel`` -* ``sudo yum install openssl-devel`` - -If the build or install fails due to mismatching kernel sources you may need to do the following: - -* ``sudo yum install kernel-headers-`uname -r``` -* ``sudo yum install kernel-src-`uname -r``` -* ``sudo yum install kernel-devel-`uname -r``` +If you are running on a kernel which includes a driver for your device, see +`Installation using kernel.org driver`_ below. Otherwise see +`Installation using 01.org QAT driver`_. Installation using kernel.org driver ------------------------------------ -For **Intel QuickAssist Technology DH895xxC**: - -Assuming you are running on at least a 4.4 kernel, you can use the stock kernel.org QAT -driver to start the QAT hardware. - -The steps below assume you are: +The examples below are based on the C62x device, if you have a different device +use the corresponding values in the above table. -* Running DPDK on a platform with one ``DH895xCC`` device. -* On a kernel at least version 4.4. +In BIOS ensure that SRIOV is enabled and either: -In BIOS ensure that SRIOV is enabled and either -a) disable VT-d or -b) enable VT-d and set ``"intel_iommu=on iommu=pt"`` in the grub file. +* Disable VT-d or +* Enable VT-d and set ``"intel_iommu=on iommu=pt"`` in the grub file. -Ensure the QAT driver is loaded on your system, by executing:: +Check that the QAT driver is loaded on your system, by executing:: - lsmod | grep qat + lsmod | grep qa -You should see the following output:: +You should see the kernel module for your device listed, e.g.:: - qat_dh895xcc 5626 0 - intel_qat 82336 1 qat_dh895xcc + qat_c62x 5626 0 + intel_qat 82336 1 qat_c62x Next, you need to expose the Virtual Functions (VFs) using the sysfs file system. -First find the bdf of the physical function (PF) of the DH895xCC device:: +First find the BDFs (Bus-Device-Function) of the physical functions (PFs) of +your device, e.g.:: - lspci -d : 435 + lspci -d : 37c8 You should see output similar to:: - 03:00.0 Co-processor: Intel Corporation Coleto Creek PCIe Endpoint - -Using the sysfs, enable the VFs:: - - echo 32 > /sys/bus/pci/drivers/dh895xcc/0000\:03\:00.0/sriov_numvfs - -If you get an error, it's likely you're using a QAT kernel driver earlier than kernel 4.4. - -To verify that the VFs are available for use - use ``lspci -d:443`` to confirm -the bdf of the 32 VF devices are available per ``DH895xCC`` device. + 1a:00.0 Co-processor: Intel Corporation Device 37c8 + 3d:00.0 Co-processor: Intel Corporation Device 37c8 + 3f:00.0 Co-processor: Intel Corporation Device 37c8 -To complete the installation - follow instructions in `Binding the available VFs to the DPDK UIO driver`_. +Enable the VFs for each PF by echoing the number of VFs per PF to the pci driver:: -**Note**: If the QAT kernel modules are not loaded and you see an error like - ``Failed to load MMP firmware qat_895xcc_mmp.bin`` this may be as a - result of not using a distribution, but just updating the kernel directly. + echo 16 > /sys/bus/pci/drivers/c6xx/0000:1a:00.0/sriov_numvfs + echo 16 > /sys/bus/pci/drivers/c6xx/0000:3d:00.0/sriov_numvfs + echo 16 > /sys/bus/pci/drivers/c6xx/0000:3f:00.0/sriov_numvfs -Download firmware from the kernel firmware repo at: -http://git.kernel.org/cgit/linux/kernel/git/firmware/linux-firmware.git/tree/ +Check that the VFs are available for use. For example ``lspci -d:37c9`` should +list 48 VF devices available for a ``C62x`` device. -Copy qat binaries to /lib/firmware: -* ``cp qat_895xcc.bin /lib/firmware`` -* ``cp qat_895xcc_mmp.bin /lib/firmware`` +To complete the installation follow the instructions in +`Binding the available VFs to the DPDK UIO driver`_. -cd to your linux source root directory and start the qat kernel modules: -* ``insmod ./drivers/crypto/qat/qat_common/intel_qat.ko`` -* ``insmod ./drivers/crypto/qat/qat_dh895xcc/qat_dh895xcc.ko`` +.. Note:: -**Note**:The following warning in /var/log/messages can be ignored: - ``IOMMU should be enabled for SR-IOV to work correctly`` + If the QAT kernel modules are not loaded and you see an error like ``Failed + to load MMP firmware qat_895xcc_mmp.bin`` in kernel logs, this may be as a + result of not using a distribution, but just updating the kernel directly. -For **Intel QuickAssist Technology C62x**: -Assuming you are running on at least a 4.5 kernel, you can use the stock kernel.org QAT -driver to start the QAT hardware. + Download firmware from the `kernel firmware repo + <http://git.kernel.org/cgit/linux/kernel/git/firmware/linux-firmware.git/tree/>`_. -The steps below assume you are: + Copy qat binaries to ``/lib/firmware``:: -* Running DPDK on a platform with one ``C62x`` device. -* On a kernel at least version 4.5. + cp qat_895xcc.bin /lib/firmware + cp qat_895xcc_mmp.bin /lib/firmware -In BIOS ensure that SRIOV is enabled and either -a) disable VT-d or -b) enable VT-d and set ``"intel_iommu=on iommu=pt"`` in the grub file. + Change to your linux source root directory and start the qat kernel modules:: -Ensure the QAT driver is loaded on your system, by executing:: + insmod ./drivers/crypto/qat/qat_common/intel_qat.ko + insmod ./drivers/crypto/qat/qat_dh895xcc/qat_dh895xcc.ko - lsmod | grep qat -You should see the following output:: +.. Note:: - qat_c62x 16384 0 - intel_qat 122880 1 qat_c62x + If you see the following warning in ``/var/log/messages`` it can be ignored: + ``IOMMU should be enabled for SR-IOV to work correctly``. -Next, you need to expose the VFs using the sysfs file system. -First find the bdf of the C62x device:: +Installation using 01.org QAT driver +------------------------------------ - lspci -d:37c8 +Download the latest QuickAssist Technology Driver from `01.org +<https://01.org/packet-processing/intel%C2%AE-quickassist-technology-drivers-and-patches>`_. +Consult the *Getting Started Guide* at the same URL for further information. -You should see output similar to:: +The steps below assume you are: - 1a:00.0 Co-processor: Intel Corporation Device 37c8 - 3d:00.0 Co-processor: Intel Corporation Device 37c8 - 3f:00.0 Co-processor: Intel Corporation Device 37c8 +* Building on a platform with one ``DH895xCC`` device. +* Using package ``qatmux.l.2.3.0-34.tgz``. +* On Fedora21 kernel ``3.17.4-301.fc21.x86_64``. -For each c62x device there are 3 PFs. -Using the sysfs, for each PF, enable the 16 VFs:: +In the BIOS ensure that SRIOV is enabled and VT-d is disabled. - echo 16 > /sys/bus/pci/drivers/c6xx/0000\:1a\:00.0/sriov_numvfs +Uninstall any existing QAT driver, for example by running: -If you get an error, it's likely you're using a QAT kernel driver earlier than kernel 4.5. +* ``./installer.sh uninstall`` in the directory where originally installed. -To verify that the VFs are available for use - use ``lspci -d:37c9`` to confirm -the bdf of the 48 VF devices are available per ``C62x`` device. +* or ``rmmod qat_dh895xcc; rmmod intel_qat``. -To complete the installation - follow instructions in `Binding the available VFs to the DPDK UIO driver`_. +Build and install the SRIOV-enabled QAT driver:: -For **Intel QuickAssist Technology C3xxx**: -Assuming you are running on at least a 4.5 kernel, you can use the stock kernel.org QAT -driver to start the QAT hardware. + mkdir /QAT + cd /QAT -The steps below assume you are: + # Copy qatmux.l.2.3.0-34.tgz to this location + tar zxof qatmux.l.2.3.0-34.tgz -* Running DPDK on a platform with one ``C3xxx`` device. -* On a kernel at least version 4.5. + export ICP_WITHOUT_IOMMU=1 + ./installer.sh install QAT1.6 host -In BIOS ensure that SRIOV is enabled and either -a) disable VT-d or -b) enable VT-d and set ``"intel_iommu=on iommu=pt"`` in the grub file. +You can use ``cat /proc/icp_dh895xcc_dev0/version`` to confirm the driver is correctly installed. +You can use ``lspci -d:443`` to confirm the of the 32 VF devices available per ``DH895xCC`` device. -Ensure the QAT driver is loaded on your system, by executing:: +To complete the installation - follow instructions in `Binding the available VFs to the DPDK UIO driver`_. - lsmod | grep qat +.. Note:: -You should see the following output:: + If using a later kernel and the build fails with an error relating to + ``strict_stroul`` not being available apply the following patch: - qat_c3xxx 16384 0 - intel_qat 122880 1 qat_c3xxx + .. code-block:: diff -Next, you need to expose the Virtual Functions (VFs) using the sysfs file system. + /QAT/QAT1.6/quickassist/utilities/downloader/Target_CoreLibs/uclo/include/linux/uclo_platform.h + + #if LINUX_VERSION_CODE >= KERNEL_VERSION(3,18,5) + + #define STR_TO_64(str, base, num, endPtr) {endPtr=NULL; if (kstrtoul((str), (base), (num))) printk("Error strtoull convert %s\n", str); } + + #else + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38) + #define STR_TO_64(str, base, num, endPtr) {endPtr=NULL; if (strict_strtoull((str), (base), (num))) printk("Error strtoull convert %s\n", str); } + #else + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25) + #define STR_TO_64(str, base, num, endPtr) {endPtr=NULL; strict_strtoll((str), (base), (num));} + #else + #define STR_TO_64(str, base, num, endPtr) \ + do { \ + if (str[0] == '-') \ + { \ + *(num) = -(simple_strtoull((str+1), &(endPtr), (base))); \ + }else { \ + *(num) = simple_strtoull((str), &(endPtr), (base)); \ + } \ + } while(0) + + #endif + #endif + #endif -First find the bdf of the physical function (PF) of the C3xxx device - lspci -d:19e2 +.. Note:: -You should see output similar to:: + If the build fails due to missing header files you may need to do following:: - 01:00.0 Co-processor: Intel Corporation Device 19e2 + sudo yum install zlib-devel + sudo yum install openssl-devel -For c3xxx device there is 1 PFs. -Using the sysfs, enable the 16 VFs:: +.. Note:: - echo 16 > /sys/bus/pci/drivers/c3xxx/0000\:01\:00.0/sriov_numvfs + If the build or install fails due to mismatching kernel sources you may need to do the following:: -If you get an error, it's likely you're using a QAT kernel driver earlier than kernel 4.5. + sudo yum install kernel-headers-`uname -r` + sudo yum install kernel-src-`uname -r` + sudo yum install kernel-devel-`uname -r` -To verify that the VFs are available for use - use ``lspci -d:19e3`` to confirm -the bdf of the 16 VF devices are available per ``C3xxx`` device. -To complete the installation - follow instructions in `Binding the available VFs to the DPDK UIO driver`_. Binding the available VFs to the DPDK UIO driver ------------------------------------------------ -For **Intel(R) QuickAssist Technology DH895xcc** device: -The unbind command below assumes ``bdfs`` of ``03:01.00-03:04.07``, if yours are different adjust the unbind command below:: +Unbind the VFs from the stock driver so they can be bound to the uio driver. - cd $RTE_SDK - modprobe uio - insmod ./build/kmod/igb_uio.ko +For an Intel(R) QuickAssist Technology DH895xCC device +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - for device in $(seq 1 4); do \ - for fn in $(seq 0 7); do \ - echo -n 0000:03:0${device}.${fn} > \ - /sys/bus/pci/devices/0000\:03\:0${device}.${fn}/driver/unbind; \ - done; \ - done +The unbind command below assumes ``BDFs`` of ``03:01.00-03:04.07``, if your +VFs are different adjust the unbind command below:: - echo "8086 0443" > /sys/bus/pci/drivers/igb_uio/new_id + for device in $(seq 1 4); do \ + for fn in $(seq 0 7); do \ + echo -n 0000:03:0${device}.${fn} > \ + /sys/bus/pci/devices/0000\:03\:0${device}.${fn}/driver/unbind; \ + done; \ + done -You can use ``lspci -vvd:443`` to confirm that all devices are now in use by igb_uio kernel driver. +For an Intel(R) QuickAssist Technology C62x device +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -For **Intel(R) QuickAssist Technology C62x** device: -The unbind command below assumes ``bdfs`` of ``1a:01.00-1a:02.07``, ``3d:01.00-3d:02.07`` and ``3f:01.00-3f:02.07``, -if yours are different adjust the unbind command below:: +The unbind command below assumes ``BDFs`` of ``1a:01.00-1a:02.07``, +``3d:01.00-3d:02.07`` and ``3f:01.00-3f:02.07``, if your VFs are different +adjust the unbind command below:: - cd $RTE_SDK - modprobe uio - insmod ./build/kmod/igb_uio.ko + for device in $(seq 1 2); do \ + for fn in $(seq 0 7); do \ + echo -n 0000:1a:0${device}.${fn} > \ + /sys/bus/pci/devices/0000\:1a\:0${device}.${fn}/driver/unbind; \ - for device in $(seq 1 2); do \ - for fn in $(seq 0 7); do \ - echo -n 0000:1a:0${device}.${fn} > \ - /sys/bus/pci/devices/0000\:1a\:0${device}.${fn}/driver/unbind; \ + echo -n 0000:3d:0${device}.${fn} > \ + /sys/bus/pci/devices/0000\:3d\:0${device}.${fn}/driver/unbind; \ - echo -n 0000:3d:0${device}.${fn} > \ - /sys/bus/pci/devices/0000\:3d\:0${device}.${fn}/driver/unbind; \ + echo -n 0000:3f:0${device}.${fn} > \ + /sys/bus/pci/devices/0000\:3f\:0${device}.${fn}/driver/unbind; \ + done; \ + done - echo -n 0000:3f:0${device}.${fn} > \ - /sys/bus/pci/devices/0000\:3f\:0${device}.${fn}/driver/unbind; \ - done; \ - done +For Intel(R) QuickAssist Technology C3xxx or D15xx device +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - echo "8086 37c9" > /sys/bus/pci/drivers/igb_uio/new_id +The unbind command below assumes ``BDFs`` of ``01:01.00-01:02.07``, if your +VFs are different adjust the unbind command below:: -You can use ``lspci -vvd:37c9`` to confirm that all devices are now in use by igb_uio kernel driver. + for device in $(seq 1 2); do \ + for fn in $(seq 0 7); do \ + echo -n 0000:01:0${device}.${fn} > \ + /sys/bus/pci/devices/0000\:01\:0${device}.${fn}/driver/unbind; \ + done; \ + done -For **Intel(R) QuickAssist Technology C3xxx** device: -The unbind command below assumes ``bdfs`` of ``01:01.00-01:02.07``, -if yours are different adjust the unbind command below:: +Bind to the DPDK uio driver +~~~~~~~~~~~~~~~~~~~~~~~~~~~ - cd $RTE_SDK - modprobe uio - insmod ./build/kmod/igb_uio.ko +Install the DPDK igb_uio driver, bind the VF PCI Device id to it and use lspci +to confirm the VF devices are now in use by igb_uio kernel driver, +e.g. for the C62x device:: - for device in $(seq 1 2); do \ - for fn in $(seq 0 7); do \ - echo -n 0000:01:0${device}.${fn} > \ - /sys/bus/pci/devices/0000\:01\:0${device}.${fn}/driver/unbind; \ + cd to the top-level DPDK directory + modprobe uio + insmod ./build/kmod/igb_uio.ko + echo "8086 37c9" > /sys/bus/pci/drivers/igb_uio/new_id + lspci -vvd:37c9 - done; \ - done - echo "8086 19e3" > /sys/bus/pci/drivers/igb_uio/new_id - -You can use ``lspci -vvd:19e3`` to confirm that all devices are now in use by igb_uio kernel driver. - - -The other way to bind the VFs to the DPDK UIO driver is by using the ``dpdk-devbind.py`` script: - -.. code-block:: console +Another way to bind the VFs to the DPDK UIO driver is by using the +``dpdk-devbind.py`` script:: - cd $RTE_SDK - ./tools/dpdk-devbind.py -b igb_uio 0000:03:01.1 + cd to the top-level DPDK directory + ./usertools/dpdk-devbind.py -b igb_uio 0000:03:01.1 diff --git a/doc/guides/cryptodevs/scheduler.rst b/doc/guides/cryptodevs/scheduler.rst new file mode 100644 index 00000000..32e56537 --- /dev/null +++ b/doc/guides/cryptodevs/scheduler.rst @@ -0,0 +1,172 @@ +.. BSD LICENSE + Copyright(c) 2017 Intel Corporation. All rights reserved. + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + * Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + * Neither the name of Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +Cryptodev Scheduler Poll Mode Driver Library +============================================ + +Scheduler PMD is a software crypto PMD, which has the capabilities of +attaching hardware and/or software cryptodevs, and distributes ingress +crypto ops among them in a certain manner. + +.. figure:: img/scheduler-overview.* + + Cryptodev Scheduler Overview + + +The Cryptodev Scheduler PMD library (**librte_pmd_crypto_scheduler**) acts as +a software crypto PMD and shares the same API provided by librte_cryptodev. +The PMD supports attaching multiple crypto PMDs, software or hardware, as +slaves, and distributes the crypto workload to them with certain behavior. +The behaviors are categorizes as different "modes". Basically, a scheduling +mode defines certain actions for scheduling crypto ops to its slaves. + +The librte_pmd_crypto_scheduler library exports a C API which provides an API +for attaching/detaching slaves, set/get scheduling modes, and enable/disable +crypto ops reordering. + +Limitations +----------- + +* Sessionless crypto operation is not supported +* OOP crypto operation is not supported when the crypto op reordering feature + is enabled. + + +Installation +------------ + +To build DPDK with CRYTPO_SCHEDULER_PMD the user is required to set +CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER=y in config/common_base, and +recompile DPDK + + +Initialization +-------------- + +To use the PMD in an application, user must: + +* Call rte_vdev_init("crpyto_scheduler") within the application. + +* Use --vdev="crpyto_scheduler" in the EAL options, which will call + rte_vdev_init() internally. + + +The following parameters (all optional) can be provided in the previous +two calls: + +* socket_id: Specify the socket where the memory for the device is going + to be allocated (by default, socket_id will be the socket where the core + that is creating the PMD is running on). + +* max_nb_sessions: Specify the maximum number of sessions that can be + created. This value may be overwritten internally if there are too + many devices are attached. + +* slave: If a cryptodev has been initialized with specific name, it can be + attached to the scheduler using this parameter, simply filling the name + here. Multiple cryptodevs can be attached initially by presenting this + parameter multiple times. + +* mode: Specify the scheduling mode of the PMD. The supported scheduling + mode parameter values are specified in the "Cryptodev Scheduler Modes + Overview" section. + +* ordering: Specify the status of the crypto operations ordering feature. + The value of this parameter can be "enable" or "disable". This feature + is disabled by default. + +Example: + +.. code-block:: console + + ... --vdev "crypto_aesni_mb_pmd,name=aesni_mb_1" --vdev "crypto_aesni_mb_pmd,name=aesni_mb_2" --vdev "crypto_scheduler_pmd,slave=aesni_mb_1,slave=aesni_mb_2" ... + +.. note:: + + * The scheduler cryptodev cannot be started unless the scheduling mode + is set and at least one slave is attached. Also, to configure the + scheduler in the run-time, like attach/detach slave(s), change + scheduling mode, or enable/disable crypto op ordering, one should stop + the scheduler first, otherwise an error will be returned. + + * The crypto op reordering feature requires using the userdata field of + every mbuf to be processed to store temporary data. By the end of + processing, the field is set to pointing to NULL, any previously + stored value of this field will be lost. + + +Cryptodev Scheduler Modes Overview +---------------------------------- + +Currently the Crypto Scheduler PMD library supports following modes of +operation: + +* **CDEV_SCHED_MODE_ROUNDROBIN:** + + *Initialization mode parameter*: **round-robin** + + Round-robin mode, which distributes the enqueued burst of crypto ops + among its slaves in a round-robin manner. This mode may help to fill + the throughput gap between the physical core and the existing cryptodevs + to increase the overall performance. + +* **CDEV_SCHED_MODE_PKT_SIZE_DISTR:** + + *Initialization mode parameter*: **packet-size-distr** + + Packet-size based distribution mode, which works with 2 slaves, the primary + slave and the secondary slave, and distributes the enqueued crypto + operations to them based on their data lengths. A crypto operation will be + distributed to the primary slave if its data length is equal to or bigger + than the designated threshold, otherwise it will be handled by the secondary + slave. + + A typical usecase in this mode is with the QAT cryptodev as the primary and + a software cryptodev as the secondary slave. This may help applications to + process additional crypto workload than what the QAT cryptodev can handle on + its own, by making use of the available CPU cycles to deal with smaller + crypto workloads. + + The threshold is set to 128 bytes by default. It can be updated by calling + function **rte_cryptodev_scheduler_option_set**. The parameter of + **option_type** must be **CDEV_SCHED_OPTION_THRESHOLD** and **option** should + point to a rte_cryptodev_scheduler_threshold_option structure filled with + appropriate threshold value. Please NOTE this threshold has be a power-of-2 + unsigned integer. + +* **CDEV_SCHED_MODE_FAILOVER:** + + *Initialization mode parameter*: **fail-over** + + Fail-over mode, which works with 2 slaves, the primary slave and the + secondary slave. In this mode, the scheduler will enqueue the incoming + crypto operation burst to the primary slave. When one or more crypto + operations fail to be enqueued, then they will be enqueued to the secondary + slave. diff --git a/doc/guides/cryptodevs/snow3g.rst b/doc/guides/cryptodevs/snow3g.rst index 75a08aab..12b6c4af 100644 --- a/doc/guides/cryptodevs/snow3g.rst +++ b/doc/guides/cryptodevs/snow3g.rst @@ -83,9 +83,9 @@ In order to enable this virtual crypto PMD, user must: To use the PMD in an application, user must: -* Call rte_eal_vdev_init("crypto_snow3g") within the application. +* Call rte_vdev_init("crypto_snow3g") within the application. -* Use --vdev="crypto_snow3g" in the EAL options, which will call rte_eal_vdev_init() internally. +* Use --vdev="crypto_snow3g" in the EAL options, which will call rte_vdev_init() internally. The following parameters (all optional) can be provided in the previous two calls: @@ -100,4 +100,4 @@ Example: .. code-block:: console - ./l2fwd-crypto -c 40 -n 4 --vdev="crypto_snow3g,socket_id=1,max_nb_sessions=128" + ./l2fwd-crypto -l 6 -n 4 --vdev="crypto_snow3g,socket_id=1,max_nb_sessions=128" diff --git a/doc/guides/cryptodevs/zuc.rst b/doc/guides/cryptodevs/zuc.rst index 38d5068a..6deb11ab 100644 --- a/doc/guides/cryptodevs/zuc.rst +++ b/doc/guides/cryptodevs/zuc.rst @@ -91,9 +91,9 @@ In order to enable this virtual crypto PMD, user must: To use the PMD in an application, user must: -* Call rte_eal_vdev_init("crypto_zuc") within the application. +* Call rte_vdev_init("crypto_zuc") within the application. -* Use --vdev="crypto_zuc" in the EAL options, which will call rte_eal_vdev_init() internally. +* Use --vdev="crypto_zuc" in the EAL options, which will call rte_vdev_init() internally. The following parameters (all optional) can be provided in the previous two calls: @@ -108,4 +108,4 @@ Example: .. code-block:: console - ./l2fwd-crypto -c 40 -n 4 --vdev="crypto_zuc,socket_id=1,max_nb_sessions=128" + ./l2fwd-crypto -l 6 -n 4 --vdev="crypto_zuc,socket_id=1,max_nb_sessions=128" |
