aboutsummaryrefslogtreecommitdiffstats
path: root/doc/guides/nics/ark.rst
diff options
context:
space:
mode:
Diffstat (limited to 'doc/guides/nics/ark.rst')
-rw-r--r--doc/guides/nics/ark.rst261
1 files changed, 261 insertions, 0 deletions
diff --git a/doc/guides/nics/ark.rst b/doc/guides/nics/ark.rst
new file mode 100644
index 00000000..a7c2590b
--- /dev/null
+++ b/doc/guides/nics/ark.rst
@@ -0,0 +1,261 @@
+.. BSD LICENSE
+
+ Copyright (c) 2015-2017 Atomic Rules LLC
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+ * Neither the name of Atomic Rules LLC nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+ARK Poll Mode Driver
+====================
+
+The ARK PMD is a DPDK poll-mode driver for the Atomic Rules Arkville
+(ARK) family of devices.
+
+More information can be found at the `Atomic Rules website
+<http://atomicrules.com>`_.
+
+Overview
+--------
+
+The Atomic Rules Arkville product is DPDK and AXI compliant product
+that marshals packets across a PCIe conduit between host DPDK mbufs and
+FPGA AXI streams.
+
+The ARK PMD, and the spirit of the overall Arkville product,
+has been to take the DPDK API/ABI as a fixed specification;
+then implement much of the business logic in FPGA RTL circuits.
+The approach of *working backwards* from the DPDK API/ABI and having
+the GPP host software *dictate*, while the FPGA hardware *copes*,
+results in significant performance gains over a naive implementation.
+
+While this document describes the ARK PMD software, it is helpful to
+understand what the FPGA hardware is and is not. The Arkville RTL
+component provides a single PCIe Physical Function (PF) supporting
+some number of RX/Ingress and TX/Egress Queues. The ARK PMD controls
+the Arkville core through a dedicated opaque Core BAR (CBAR).
+To allow users full freedom for their own FPGA application IP,
+an independent FPGA Application BAR (ABAR) is provided.
+
+One popular way to imagine Arkville's FPGA hardware aspect is as the
+FPGA PCIe-facing side of a so-called Smart NIC. The Arkville core does
+not contain any MACs, and is link-speed independent, as well as
+agnostic to the number of physical ports the application chooses to
+use. The ARK driver exposes the familiar PMD interface to allow packet
+movement to and from mbufs across multiple queues.
+
+However FPGA RTL applications could contain a universe of added
+functionality that an Arkville RTL core does not provide or can
+not anticipate. To allow for this expectation of user-defined
+innovation, the ARK PMD provides a dynamic mechanism of adding
+capabilities without having to modify the ARK PMD.
+
+The ARK PMD is intended to support all instances of the Arkville
+RTL Core, regardless of configuration, FPGA vendor, or target
+board. While specific capabilities such as number of physical
+hardware queue-pairs are negotiated; the driver is designed to
+remain constant over a broad and extendable feature set.
+
+Intentionally, Arkville by itself DOES NOT provide common NIC
+capabilities such as offload or receive-side scaling (RSS).
+These capabilities would be viewed as a gate-level "tax" on
+Green-box FPGA applications that do not require such function.
+Instead, they can be added as needed with essentially no
+overhead to the FPGA Application.
+
+The ARK PMD also supports optional user extensions, through dynamic linking.
+The ARK PMD user extensions are a feature of Arkville’s DPDK
+net/ark poll mode driver, allowing users to add their
+own code to extend the net/ark functionality without
+having to make source code changes to the driver. One motivation for
+this capability is that while DPDK provides a rich set of functions
+to interact with NIC-like capabilities (e.g. MAC addresses and statistics),
+the Arkville RTL IP does not include a MAC. Users can supply their
+own MAC or custom FPGA applications, which may require control from
+the PMD. The user extension is the means providing the control
+between the user's FPGA application and the existing DPDK features via
+the PMD.
+
+Device Parameters
+-------------------
+
+The ARK PMD supports device parameters that are used for packet
+routing and for internal packet generation and packet checking. This
+section describes the supported parameters. These features are
+primarily used for diagnostics, testing, and performance verification
+under the guidance of an Arkville specialist. The nominal use of
+Arkville does not require any configuration using these parameters.
+
+"Pkt_dir"
+
+The Packet Director controls connectivity between Arkville's internal
+hardware components. The features of the Pkt_dir are only used for
+diagnostics and testing; it is not intended for nominal use. The full
+set of features are not published at this level.
+
+Format:
+Pkt_dir=0x00110F10
+
+"Pkt_gen"
+
+The packet generator parameter takes a file as its argument. The file
+contains configuration parameters used internally for regression
+testing and are not intended to be published at this level. The
+packet generator is an internal Arkville hardware component.
+
+Format:
+Pkt_gen=./config/pg.conf
+
+"Pkt_chkr"
+
+The packet checker parameter takes a file as its argument. The file
+contains configuration parameters used internally for regression
+testing and are not intended to be published at this level. The
+packet checker is an internal Arkville hardware component.
+
+Format:
+Pkt_chkr=./config/pc.conf
+
+
+Data Path Interface
+-------------------
+
+Ingress RX and Egress TX operation is by the nominal DPDK API .
+The driver supports single-port, multi-queue for both RX and TX.
+
+Refer to ``ark_ethdev.h`` for the list of supported methods to
+act upon RX and TX Queues.
+
+Configuration Information
+-------------------------
+
+**DPDK Configuration Parameters**
+
+ The following configuration options are available for the ARK PMD:
+
+ * **CONFIG_RTE_LIBRTE_ARK_PMD** (default y): Enables or disables inclusion
+ of the ARK PMD driver in the DPDK compilation.
+
+ * **CONFIG_RTE_LIBRTE_ARK_PAD_TX** (default y): When enabled TX
+ packets are padded to 60 bytes to support downstream MACS.
+
+ * **CONFIG_RTE_LIBRTE_ARK_DEBUG_RX** (default n): Enables or disables debug
+ logging and internal checking of RX ingress logic within the ARK PMD driver.
+
+ * **CONFIG_RTE_LIBRTE_ARK_DEBUG_TX** (default n): Enables or disables debug
+ logging and internal checking of TX egress logic within the ARK PMD driver.
+
+ * **CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS** (default n): Enables or disables debug
+ logging of detailed packet and performance statistics gathered in
+ the PMD and FPGA.
+
+ * **CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE** (default n): Enables or disables debug
+ logging of detailed PMD events and status.
+
+
+Building DPDK
+-------------
+
+See the :ref:`DPDK Getting Started Guide for Linux <linux_gsg>` for
+instructions on how to build DPDK.
+
+By default the ARK PMD library will be built into the DPDK library.
+
+For configuring and using UIO and VFIO frameworks, please also refer :ref:`the
+documentation that comes with DPDK suite <linux_gsg>`.
+
+Supported ARK RTL PCIe Instances
+--------------------------------
+
+ARK PMD supports the following Arkville RTL PCIe instances including:
+
+* ``1d6c:100d`` - AR-ARKA-FX0 [Arkville 32B DPDK Data Mover]
+* ``1d6c:100e`` - AR-ARKA-FX1 [Arkville 64B DPDK Data Mover]
+
+Supported Operating Systems
+---------------------------
+
+Any Linux distribution fulfilling the conditions described in ``System Requirements``
+section of :ref:`the DPDK documentation <linux_gsg>` or refer to *DPDK
+Release Notes*. ARM and PowerPC architectures are not supported at this time.
+
+
+Supported Features
+------------------
+
+* Dynamic ARK PMD extensions
+* Multiple receive and transmit queues
+* Jumbo frames up to 9K
+* Hardware Statistics
+
+Unsupported Features
+--------------------
+
+Features that may be part of, or become part of, the Arkville RTL IP that are
+not currently supported or exposed by the ARK PMD include:
+
+* PCIe SR-IOV Virtual Functions (VFs)
+* Arkville's Packet Generator Control and Status
+* Arkville's Packet Director Control and Status
+* Arkville's Packet Checker Control and Status
+* Arkville's Timebase Management
+
+Pre-Requisites
+--------------
+
+#. Prepare the system as recommended by DPDK suite. This includes environment
+ variables, hugepages configuration, tool-chains and configuration
+
+#. Insert igb_uio kernel module using the command 'modprobe igb_uio'
+
+#. Bind the intended ARK device to igb_uio module
+
+At this point the system should be ready to run DPDK applications. Once the
+application runs to completion, the ARK PMD can be detached from igb_uio if necessary.
+
+Usage Example
+-------------
+
+Follow instructions available in the document
+:ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>` to launch
+**testpmd** with Atomic Rules ARK devices managed by librte_pmd_ark.
+
+Example output:
+
+.. code-block:: console
+
+ [...]
+ EAL: PCI device 0000:01:00.0 on NUMA socket -1
+ EAL: probe driver: 1d6c:100e rte_ark_pmd
+ EAL: PCI memory mapped at 0x7f9b6c400000
+ PMD: eth_ark_dev_init(): Initializing 0:2:0.1
+ ARKP PMD CommitID: 378f3a67
+ Configuring Port 0 (socket 0)
+ Port 0: DC:3C:F6:00:00:01
+ Checking link statuses...
+ Port 0 Link Up - speed 100000 Mbps - full-duplex
+ Done
+ testpmd>