summaryrefslogtreecommitdiffstats
path: root/doc/guides/nics/ena.rst
diff options
context:
space:
mode:
Diffstat (limited to 'doc/guides/nics/ena.rst')
-rw-r--r--doc/guides/nics/ena.rst69
1 files changed, 20 insertions, 49 deletions
diff --git a/doc/guides/nics/ena.rst b/doc/guides/nics/ena.rst
index 073b35ae..d19912e9 100644
--- a/doc/guides/nics/ena.rst
+++ b/doc/guides/nics/ena.rst
@@ -200,52 +200,23 @@ application runs to completion, the ENA can be detached from igb_uio if necessar
Usage example
-------------
-This section demonstrates how to launch **testpmd** with Amazon ENA
-devices managed by librte_pmd_ena.
-
-#. Load the kernel modules:
-
- .. code-block:: console
-
- modprobe uio
- insmod ./x86_64-native-linuxapp-gcc/kmod/igb_uio.ko
-
- .. note::
-
- Currently Amazon ENA PMD driver depends on igb_uio user space I/O kernel module
-
-#. Mount and request huge pages:
-
- .. code-block:: console
-
- mount -t hugetlbfs nodev /mnt/hugepages
- echo 1024 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
-
-#. Bind UIO driver to ENA device (using provided by DPDK binding tool):
-
- .. code-block:: console
-
- ./tools/dpdk-devbind.py --bind=igb_uio 0000:02:00.1
-
-#. Start testpmd with basic parameters:
-
- .. code-block:: console
-
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -- -i
-
- Example output:
-
- .. code-block:: console
-
- [...]
- EAL: PCI device 0000:02:00.1 on NUMA socket -1
- EAL: probe driver: 1d0f:ec20 rte_ena_pmd
- EAL: PCI memory mapped at 0x7f9b6c400000
- PMD: eth_ena_dev_init(): Initializing 0:2:0.1
- Interactive-mode selected
- Configuring Port 0 (socket 0)
- Port 0: 00:00:00:11:00:01
- Checking link statuses...
- Port 0 Link Up - speed 10000 Mbps - full-duplex
- Done
- testpmd>
+Follow instructions available in the document
+:ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>` to launch
+**testpmd** with Amazon ENA devices managed by librte_pmd_ena.
+
+Example output:
+
+.. code-block:: console
+
+ [...]
+ EAL: PCI device 0000:02:00.1 on NUMA socket -1
+ EAL: probe driver: 1d0f:ec20 rte_ena_pmd
+ EAL: PCI memory mapped at 0x7f9b6c400000
+ PMD: eth_ena_dev_init(): Initializing 0:2:0.1
+ Interactive-mode selected
+ Configuring Port 0 (socket 0)
+ Port 0: 00:00:00:11:00:01
+ Checking link statuses...
+ Port 0 Link Up - speed 10000 Mbps - full-duplex
+ Done
+ testpmd>