aboutsummaryrefslogtreecommitdiffstats
path: root/doc/guides/nics/mlx4.rst
diff options
context:
space:
mode:
Diffstat (limited to 'doc/guides/nics/mlx4.rst')
-rw-r--r--doc/guides/nics/mlx4.rst383
1 files changed, 383 insertions, 0 deletions
diff --git a/doc/guides/nics/mlx4.rst b/doc/guides/nics/mlx4.rst
new file mode 100644
index 00000000..49f46263
--- /dev/null
+++ b/doc/guides/nics/mlx4.rst
@@ -0,0 +1,383 @@
+.. BSD LICENSE
+ Copyright 2012-2015 6WIND S.A.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+ * Neither the name of 6WIND S.A. nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+MLX4 poll mode driver library
+=============================
+
+The MLX4 poll mode driver library (**librte_pmd_mlx4**) implements support
+for **Mellanox ConnectX-3** and **Mellanox ConnectX-3 Pro** 10/40 Gbps adapters
+as well as their virtual functions (VF) in SR-IOV context.
+
+Information and documentation about this family of adapters can be found on
+the `Mellanox website <http://www.mellanox.com>`_. Help is also provided by
+the `Mellanox community <http://community.mellanox.com/welcome>`_.
+
+There is also a `section dedicated to this poll mode driver
+<http://www.mellanox.com/page/products_dyn?product_family=209&mtag=pmd_for_dpdk>`_.
+
+.. note::
+
+ Due to external dependencies, this driver is disabled by default. It must
+ be enabled manually by setting ``CONFIG_RTE_LIBRTE_MLX4_PMD=y`` and
+ recompiling DPDK.
+
+Implementation details
+----------------------
+
+Most Mellanox ConnectX-3 devices provide two ports but expose a single PCI
+bus address, thus unlike most drivers, librte_pmd_mlx4 registers itself as a
+PCI driver that allocates one Ethernet device per detected port.
+
+For this reason, one cannot white/blacklist a single port without also
+white/blacklisting the others on the same device.
+
+Besides its dependency on libibverbs (that implies libmlx4 and associated
+kernel support), librte_pmd_mlx4 relies heavily on system calls for control
+operations such as querying/updating the MTU and flow control parameters.
+
+For security reasons and robustness, this driver only deals with virtual
+memory addresses. The way resources allocations are handled by the kernel
+combined with hardware specifications that allow it to handle virtual memory
+addresses directly ensure that DPDK applications cannot access random
+physical memory (or memory that does not belong to the current process).
+
+This capability allows the PMD to coexist with kernel network interfaces
+which remain functional, although they stop receiving unicast packets as
+long as they share the same MAC address.
+
+Compiling librte_pmd_mlx4 causes DPDK to be linked against libibverbs.
+
+Features
+--------
+
+- RSS, also known as RCA, is supported. In this mode the number of
+ configured RX queues must be a power of two.
+- VLAN filtering is supported.
+- Link state information is provided.
+- Promiscuous mode is supported.
+- All multicast mode is supported.
+- Multiple MAC addresses (unicast, multicast) can be configured.
+- Scattered packets are supported for TX and RX.
+- Inner L3/L4 (IP, TCP and UDP) TX/RX checksum offloading and validation.
+- Outer L3 (IP) TX/RX checksum offloading and validation for VXLAN frames.
+- Secondary process TX is supported.
+
+Limitations
+-----------
+
+- RSS hash key cannot be modified.
+- RSS RETA cannot be configured
+- RSS always includes L3 (IPv4/IPv6) and L4 (UDP/TCP). They cannot be
+ dissociated.
+- Hardware counters are not implemented (they are software counters).
+- Secondary process RX is not supported.
+
+Configuration
+-------------
+
+Compilation options
+~~~~~~~~~~~~~~~~~~~
+
+These options can be modified in the ``.config`` file.
+
+- ``CONFIG_RTE_LIBRTE_MLX4_PMD`` (default **n**)
+
+ Toggle compilation of librte_pmd_mlx4 itself.
+
+- ``CONFIG_RTE_LIBRTE_MLX4_DEBUG`` (default **n**)
+
+ Toggle debugging code and stricter compilation flags. Enabling this option
+ adds additional run-time checks and debugging messages at the cost of
+ lower performance.
+
+- ``CONFIG_RTE_LIBRTE_MLX4_SGE_WR_N`` (default **4**)
+
+ Number of scatter/gather elements (SGEs) per work request (WR). Lowering
+ this number improves performance but also limits the ability to receive
+ scattered packets (packets that do not fit a single mbuf). The default
+ value is a safe tradeoff.
+
+- ``CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE`` (default **0**)
+
+ Amount of data to be inlined during TX operations. Improves latency but
+ lowers throughput.
+
+- ``CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE`` (default **8**)
+
+ Maximum number of cached memory pools (MPs) per TX queue. Each MP from
+ which buffers are to be transmitted must be associated to memory regions
+ (MRs). This is a slow operation that must be cached.
+
+ This value is always 1 for RX queues since they use a single MP.
+
+- ``CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS`` (default **1**)
+
+ Toggle software counters. No counters are available if this option is
+ disabled since hardware counters are not supported.
+
+Environment variables
+~~~~~~~~~~~~~~~~~~~~~
+
+- ``MLX4_INLINE_RECV_SIZE``
+
+ A nonzero value enables inline receive for packets up to that size. May
+ significantly improve performance in some cases but lower it in
+ others. Requires careful testing.
+
+Run-time configuration
+~~~~~~~~~~~~~~~~~~~~~~
+
+- The only constraint when RSS mode is requested is to make sure the number
+ of RX queues is a power of two. This is a hardware requirement.
+
+- librte_pmd_mlx4 brings kernel network interfaces up during initialization
+ because it is affected by their state. Forcing them down prevents packets
+ reception.
+
+- **ethtool** operations on related kernel interfaces also affect the PMD.
+
+Kernel module parameters
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+The **mlx4_core** kernel module has several parameters that affect the
+behavior and/or the performance of librte_pmd_mlx4. Some of them are described
+below.
+
+- **num_vfs** (integer or triplet, optionally prefixed by device address
+ strings)
+
+ Create the given number of VFs on the specified devices.
+
+- **log_num_mgm_entry_size** (integer)
+
+ Device-managed flow steering (DMFS) is required by DPDK applications. It is
+ enabled by using a negative value, the last four bits of which have a
+ special meaning.
+
+ - **-1**: force device-managed flow steering (DMFS).
+ - **-7**: configure optimized steering mode to improve performance with the
+ following limitation: VLAN filtering is not supported with this mode.
+ This is the recommended mode in case VLAN filter is not needed.
+
+Prerequisites
+-------------
+
+This driver relies on external libraries and kernel drivers for resources
+allocations and initialization. The following dependencies are not part of
+DPDK and must be installed separately:
+
+- **libibverbs**
+
+ User space verbs framework used by librte_pmd_mlx4. This library provides
+ a generic interface between the kernel and low-level user space drivers
+ such as libmlx4.
+
+ It allows slow and privileged operations (context initialization, hardware
+ resources allocations) to be managed by the kernel and fast operations to
+ never leave user space.
+
+- **libmlx4**
+
+ Low-level user space driver library for Mellanox ConnectX-3 devices,
+ it is automatically loaded by libibverbs.
+
+ This library basically implements send/receive calls to the hardware
+ queues.
+
+- **Kernel modules** (mlnx-ofed-kernel)
+
+ They provide the kernel-side verbs API and low level device drivers that
+ manage actual hardware initialization and resources sharing with user
+ space processes.
+
+ Unlike most other PMDs, these modules must remain loaded and bound to
+ their devices:
+
+ - mlx4_core: hardware driver managing Mellanox ConnectX-3 devices.
+ - mlx4_en: Ethernet device driver that provides kernel network interfaces.
+ - mlx4_ib: InifiniBand device driver.
+ - ib_uverbs: user space driver for verbs (entry point for libibverbs).
+
+- **Firmware update**
+
+ Mellanox OFED releases include firmware updates for ConnectX-3 adapters.
+
+ Because each release provides new features, these updates must be applied to
+ match the kernel modules and libraries they come with.
+
+.. note::
+
+ Both libraries are BSD and GPL licensed. Linux kernel modules are GPL
+ licensed.
+
+Currently supported by DPDK:
+
+- Mellanox OFED **3.1**.
+- Firmware version **2.35.5100** and higher.
+- Supported architectures: **x86_64** and **POWER8**.
+
+Getting Mellanox OFED
+~~~~~~~~~~~~~~~~~~~~~
+
+While these libraries and kernel modules are available on OpenFabrics
+Alliance's `website <https://www.openfabrics.org/>`_ and provided by package
+managers on most distributions, this PMD requires Ethernet extensions that
+may not be supported at the moment (this is a work in progress).
+
+`Mellanox OFED
+<http://www.mellanox.com/page/products_dyn?product_family=26&mtag=linux_sw_drivers>`_
+includes the necessary support and should be used in the meantime. For DPDK,
+only libibverbs, libmlx4, mlnx-ofed-kernel packages and firmware updates are
+required from that distribution.
+
+.. note::
+
+ Several versions of Mellanox OFED are available. Installing the version
+ this DPDK release was developed and tested against is strongly
+ recommended. Please check the `prerequisites`_.
+
+Usage example
+-------------
+
+This section demonstrates how to launch **testpmd** with Mellanox ConnectX-3
+devices managed by librte_pmd_mlx4.
+
+#. Load the kernel modules:
+
+ .. code-block:: console
+
+ modprobe -a ib_uverbs mlx4_en mlx4_core mlx4_ib
+
+ Alternatively if MLNX_OFED is fully installed, the following script can
+ be run:
+
+ .. code-block:: console
+
+ /etc/init.d/openibd restart
+
+ .. note::
+
+ User space I/O kernel modules (uio and igb_uio) are not used and do
+ not have to be loaded.
+
+#. Make sure Ethernet interfaces are in working order and linked to kernel
+ verbs. Related sysfs entries should be present:
+
+ .. code-block:: console
+
+ ls -d /sys/class/net/*/device/infiniband_verbs/uverbs* | cut -d / -f 5
+
+ Example output:
+
+ .. code-block:: console
+
+ eth2
+ eth3
+ eth4
+ eth5
+
+#. Optionally, retrieve their PCI bus addresses for whitelisting:
+
+ .. code-block:: console
+
+ {
+ for intf in eth2 eth3 eth4 eth5;
+ do
+ (cd "/sys/class/net/${intf}/device/" && pwd -P);
+ done;
+ } |
+ sed -n 's,.*/\(.*\),-w \1,p'
+
+ Example output:
+
+ .. code-block:: console
+
+ -w 0000:83:00.0
+ -w 0000:83:00.0
+ -w 0000:84:00.0
+ -w 0000:84:00.0
+
+ .. note::
+
+ There are only two distinct PCI bus addresses because the Mellanox
+ ConnectX-3 adapters installed on this system are dual port.
+
+#. Request huge pages:
+
+ .. code-block:: console
+
+ echo 1024 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages/nr_hugepages
+
+#. Start testpmd with basic parameters:
+
+ .. code-block:: console
+
+ testpmd -c 0xff00 -n 4 -w 0000:83:00.0 -w 0000:84:00.0 -- --rxq=2 --txq=2 -i
+
+ Example output:
+
+ .. code-block:: console
+
+ [...]
+ EAL: PCI device 0000:83:00.0 on NUMA socket 1
+ EAL: probe driver: 15b3:1007 librte_pmd_mlx4
+ PMD: librte_pmd_mlx4: PCI information matches, using device "mlx4_0" (VF: false)
+ PMD: librte_pmd_mlx4: 2 port(s) detected
+ PMD: librte_pmd_mlx4: port 1 MAC address is 00:02:c9:b5:b7:50
+ PMD: librte_pmd_mlx4: port 2 MAC address is 00:02:c9:b5:b7:51
+ EAL: PCI device 0000:84:00.0 on NUMA socket 1
+ EAL: probe driver: 15b3:1007 librte_pmd_mlx4
+ PMD: librte_pmd_mlx4: PCI information matches, using device "mlx4_1" (VF: false)
+ PMD: librte_pmd_mlx4: 2 port(s) detected
+ PMD: librte_pmd_mlx4: port 1 MAC address is 00:02:c9:b5:ba:b0
+ PMD: librte_pmd_mlx4: port 2 MAC address is 00:02:c9:b5:ba:b1
+ Interactive-mode selected
+ Configuring Port 0 (socket 0)
+ PMD: librte_pmd_mlx4: 0x867d60: TX queues number update: 0 -> 2
+ PMD: librte_pmd_mlx4: 0x867d60: RX queues number update: 0 -> 2
+ Port 0: 00:02:C9:B5:B7:50
+ Configuring Port 1 (socket 0)
+ PMD: librte_pmd_mlx4: 0x867da0: TX queues number update: 0 -> 2
+ PMD: librte_pmd_mlx4: 0x867da0: RX queues number update: 0 -> 2
+ Port 1: 00:02:C9:B5:B7:51
+ Configuring Port 2 (socket 0)
+ PMD: librte_pmd_mlx4: 0x867de0: TX queues number update: 0 -> 2
+ PMD: librte_pmd_mlx4: 0x867de0: RX queues number update: 0 -> 2
+ Port 2: 00:02:C9:B5:BA:B0
+ Configuring Port 3 (socket 0)
+ PMD: librte_pmd_mlx4: 0x867e20: TX queues number update: 0 -> 2
+ PMD: librte_pmd_mlx4: 0x867e20: RX queues number update: 0 -> 2
+ Port 3: 00:02:C9:B5:BA:B1
+ Checking link statuses...
+ Port 0 Link Up - speed 10000 Mbps - full-duplex
+ Port 1 Link Up - speed 40000 Mbps - full-duplex
+ Port 2 Link Up - speed 10000 Mbps - full-duplex
+ Port 3 Link Up - speed 40000 Mbps - full-duplex
+ Done
+ testpmd>