1 files changed, 100 insertions, 0 deletions
diff --git a/doc/guides/nics/vdev_netvsc.rst b/doc/guides/nics/vdev_netvsc.rst
new file mode 100644
index 00000000..55d130a3
--- /dev/null
+++ b/doc/guides/nics/vdev_netvsc.rst
@@ -0,0 +1,100 @@
+..  SPDX-License-Identifier: BSD-3-Clause
+    Copyright 2017 6WIND S.A.
+    Copyright 2017 Mellanox Technologies, Ltd.
+
+VDEV_NETVSC driver
+==================
+
+The VDEV_NETVSC driver (librte_pmd_vdev_netvsc) provides support for NetVSC
+interfaces and associated SR-IOV virtual function (VF) devices found in
+Linux virtual machines running on Microsoft Hyper-V_ (including Azure)
+platforms.
+
+.. _Hyper-V: https://docs.microsoft.com/en-us/windows-hardware/drivers/network/overview-of-hyper-v
+
+Implementation details
+----------------------
+
+Each instance of this driver effectively needs to drive two devices: the
+NetVSC interface proper and its SR-IOV VF (referred to as "physical" from
+this point on) counterpart sharing the same MAC address.
+
+Physical devices are part of the host system and cannot be maintained during
+VM migration. From a VM standpoint they appear as hot-plug devices that come
+and go without prior notice.
+
+When the physical device is present, egress and most of the ingress traffic
+flows through it; only multicasts and other hypervisor control still flow
+through NetVSC. Otherwise, NetVSC acts as a fallback for all traffic.
+
+To avoid unnecessary code duplication and ensure maximum performance,
+handling of physical devices is left to their original PMDs; this virtual
+device driver (also known as *vdev*) manages other PMDs as summarized by the
+following block diagram::
+
+         .------------------.
+         | DPDK application |
+         `--------+---------'
+                  |
+           .------+------.
+           | DPDK ethdev |
+           `------+------'       Control
+                  |                 |
+     .------------+------------.    v    .--------------------.
+     |       failsafe PMD      +---------+ vdev_netvsc driver |
+     `--+-------------------+--'         `--------------------'
+        |                   |
+        |          .........|.........
+        |          :        |        :
+   .----+----.     :   .----+----.   :
+   | tap PMD |     :   | any PMD |   :
+   `----+----'     :   `----+----'   : <-- Hot-pluggable
+        |          :        |        :
+ .------+-------.  :  .-----+-----.  :
+ | NetVSC-based |  :  | SR-IOV VF |  :
+ |   netdevice  |  :  |   device  |  :
+ `--------------'  :  `-----------'  :
+                   :.................:
+
+
+This driver implementation may be temporary and should be improved or removed
+either when hot-plug will be fully supported in EAL and bus drivers or when
+a new NetVSC driver will be integrated.
+
+Build options
+-------------
+
+- ``CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD`` (default ``y``)
+
+   Toggle compilation of this driver.
+
+Run-time parameters
+-------------------
+
+This driver is invoked automatically in Hyper-V VM systems unless the user
+invoked it by command line using ``--vdev=net_vdev_netvsc`` EAL option.
+
+The following device parameters are supported:
+
+- ``iface`` [string]
+
+  Provide a specific NetVSC interface (netdevice) name to attach this driver
+  to. Can be provided multiple times for additional instances.
+
+- ``mac`` [string]
+
+  Same as ``iface`` except a suitable NetVSC interface is located using its
+  MAC address.
+
+- ``force`` [int]
+
+  If nonzero, forces the use of specified interfaces even if not detected as
+  NetVSC or detected as routed NETVSC.
+
+- ``ignore`` [int]
+
+  If nonzero, ignores the driver runnig (actually used to disable the
+  auto-detection in Hyper-V VM).
+
+Not specifying either ``iface`` or ``mac`` makes this driver attach itself to
+all unrouted NetVSC interfaces found on the system.