summaryrefslogtreecommitdiffstats
path: root/doc/guides/nics/virtio.rst
diff options
context:
space:
mode:
Diffstat (limited to 'doc/guides/nics/virtio.rst')
-rw-r--r--doc/guides/nics/virtio.rst213
1 files changed, 213 insertions, 0 deletions
diff --git a/doc/guides/nics/virtio.rst b/doc/guides/nics/virtio.rst
new file mode 100644
index 00000000..06ca433a
--- /dev/null
+++ b/doc/guides/nics/virtio.rst
@@ -0,0 +1,213 @@
+.. BSD LICENSE
+ Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+ * Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+Poll Mode Driver for Emulated Virtio NIC
+========================================
+
+Virtio is a para-virtualization framework initiated by IBM, and supported by KVM hypervisor.
+In the Data Plane Development Kit (DPDK),
+we provide a virtio Poll Mode Driver (PMD) as a software solution, comparing to SRIOV hardware solution,
+for fast guest VM to guest VM communication and guest VM to host communication.
+
+Vhost is a kernel acceleration module for virtio qemu backend.
+The DPDK extends kni to support vhost raw socket interface,
+which enables vhost to directly read/ write packets from/to a physical port.
+With this enhancement, virtio could achieve quite promising performance.
+
+In future release, we will also make enhancement to vhost backend,
+releasing peak performance of virtio PMD driver.
+
+For basic qemu-KVM installation and other Intel EM poll mode driver in guest VM,
+please refer to Chapter "Driver for VM Emulated Devices".
+
+In this chapter, we will demonstrate usage of virtio PMD driver with two backends,
+standard qemu vhost back end and vhost kni back end.
+
+Virtio Implementation in DPDK
+-----------------------------
+
+For details about the virtio spec, refer to Virtio PCI Card Specification written by Rusty Russell.
+
+As a PMD, virtio provides packet reception and transmission callbacks virtio_recv_pkts and virtio_xmit_pkts.
+
+In virtio_recv_pkts, index in range [vq->vq_used_cons_idx , vq->vq_ring.used->idx) in vring is available for virtio to burst out.
+
+In virtio_xmit_pkts, same index range in vring is available for virtio to clean.
+Virtio will enqueue to be transmitted packets into vring, advance the vq->vq_ring.avail->idx,
+and then notify the host back end if necessary.
+
+Features and Limitations of virtio PMD
+--------------------------------------
+
+In this release, the virtio PMD driver provides the basic functionality of packet reception and transmission.
+
+* It supports merge-able buffers per packet when receiving packets and scattered buffer per packet
+ when transmitting packets. The packet size supported is from 64 to 1518.
+
+* It supports multicast packets and promiscuous mode.
+
+* The descriptor number for the RX/TX queue is hard-coded to be 256 by qemu.
+ If given a different descriptor number by the upper application,
+ the virtio PMD generates a warning and fall back to the hard-coded value.
+
+* Features of mac/vlan filter are supported, negotiation with vhost/backend are needed to support them.
+ When backend can't support vlan filter, virtio app on guest should disable vlan filter to make sure
+ the virtio port is configured correctly. E.g. specify '--disable-hw-vlan' in testpmd command line.
+
+* RTE_PKTMBUF_HEADROOM should be defined larger than sizeof(struct virtio_net_hdr), which is 10 bytes.
+
+* Virtio does not support runtime configuration.
+
+* Virtio supports Link State interrupt.
+
+* Virtio supports software vlan stripping and inserting.
+
+* Virtio supports using port IO to get PCI resource when uio/igb_uio module is not available.
+
+Prerequisites
+-------------
+
+The following prerequisites apply:
+
+* In the BIOS, turn VT-x and VT-d on
+
+* Linux kernel with KVM module; vhost module loaded and ioeventfd supported.
+ Qemu standard backend without vhost support isn't tested, and probably isn't supported.
+
+Virtio with kni vhost Back End
+------------------------------
+
+This section demonstrates kni vhost back end example setup for Phy-VM Communication.
+
+.. _figure_host_vm_comms:
+
+.. figure:: img/host_vm_comms.*
+
+ Host2VM Communication Example Using kni vhost Back End
+
+
+Host2VM communication example
+
+#. Load the kni kernel module:
+
+ .. code-block:: console
+
+ insmod rte_kni.ko
+
+ Other basic DPDK preparations like hugepage enabling, uio port binding are not listed here.
+ Please refer to the *DPDK Getting Started Guide* for detailed instructions.
+
+#. Launch the kni user application:
+
+ .. code-block:: console
+
+ examples/kni/build/app/kni -c 0xf -n 4 -- -p 0x1 -P --config="(0,1,3)"
+
+ This command generates one network device vEth0 for physical port.
+ If specify more physical ports, the generated network device will be vEth1, vEth2, and so on.
+
+ For each physical port, kni creates two user threads.
+ One thread loops to fetch packets from the physical NIC port into the kni receive queue.
+ The other user thread loops to send packets in the kni transmit queue.
+
+ For each physical port, kni also creates a kernel thread that retrieves packets from the kni receive queue,
+ place them onto kni's raw socket's queue and wake up the vhost kernel thread to exchange packets with the virtio virt queue.
+
+ For more details about kni, please refer to :ref:`kni`.
+
+#. Enable the kni raw socket functionality for the specified physical NIC port,
+ get the generated file descriptor and set it in the qemu command line parameter.
+ Always remember to set ioeventfd_on and vhost_on.
+
+ Example:
+
+ .. code-block:: console
+
+ echo 1 > /sys/class/net/vEth0/sock_en
+ fd=`cat /sys/class/net/vEth0/sock_fd`
+ exec qemu-system-x86_64 -enable-kvm -cpu host \
+ -m 2048 -smp 4 -name dpdk-test1-vm1 \
+ -drive file=/data/DPDKVMS/dpdk-vm.img \
+ -netdev tap, fd=$fd,id=mynet_kni, script=no,vhost=on \
+ -device virtio-net-pci,netdev=mynet_kni,bus=pci.0,addr=0x3,ioeventfd=on \
+ -vnc:1 -daemonize
+
+ In the above example, virtio port 0 in the guest VM will be associated with vEth0, which in turns corresponds to a physical port,
+ which means received packets come from vEth0, and transmitted packets is sent to vEth0.
+
+#. In the guest, bind the virtio device to the uio_pci_generic kernel module and start the forwarding application.
+ When the virtio port in guest bursts rx, it is getting packets from the raw socket's receive queue.
+ When the virtio port bursts tx, it is sending packet to the tx_q.
+
+ .. code-block:: console
+
+ modprobe uio
+ echo 512 > /sys/devices/system/node/node0/hugepages/hugepages-2048kB/nr_hugepages
+ modprobe uio_pci_generic
+ python tools/dpdk_nic_bind.py -b uio_pci_generic 00:03.0
+
+ We use testpmd as the forwarding application in this example.
+
+ .. figure:: img/console.*
+
+ Running testpmd
+
+#. Use IXIA packet generator to inject a packet stream into the KNI physical port.
+
+ The packet reception and transmission flow path is:
+
+ IXIA packet generator->82599 PF->KNI rx queue->KNI raw socket queue->Guest VM virtio port 0 rx burst->Guest VM virtio port 0 tx burst-> KNI tx queue->82599 PF-> IXIA packet generator
+
+Virtio with qemu virtio Back End
+--------------------------------
+
+.. _figure_host_vm_comms_qemu:
+
+.. figure:: img/host_vm_comms_qemu.*
+
+ Host2VM Communication Example Using qemu vhost Back End
+
+
+.. code-block:: console
+
+ qemu-system-x86_64 -enable-kvm -cpu host -m 2048 -smp 2 -mem-path /dev/
+ hugepages -mem-prealloc
+ -drive file=/data/DPDKVMS/dpdk-vm1
+ -netdev tap,id=vm1_p1,ifname=tap0,script=no,vhost=on
+ -device virtio-net-pci,netdev=vm1_p1,bus=pci.0,addr=0x3,ioeventfd=on
+ -device pci-assign,host=04:10.1 \
+
+In this example, the packet reception flow path is:
+
+ IXIA packet generator->82599 PF->Linux Bridge->TAP0's socket queue-> Guest VM virtio port 0 rx burst-> Guest VM 82599 VF port1 tx burst-> IXIA packet generator
+
+The packet transmission flow is:
+
+ IXIA packet generator-> Guest VM 82599 VF port1 rx burst-> Guest VM virtio port 0 tx burst-> tap -> Linux Bridge->82599 PF-> IXIA packet generator