diff options
Diffstat (limited to 'doc/guides/nics')
36 files changed, 768 insertions, 713 deletions
diff --git a/doc/guides/nics/bnx2x.rst b/doc/guides/nics/bnx2x.rst index fbfc048e..31f146a0 100644 --- a/doc/guides/nics/bnx2x.rst +++ b/doc/guides/nics/bnx2x.rst @@ -84,7 +84,7 @@ Prerequisites - Requires firmware version **7.2.51.0**. It is included in most of the standard Linux distros. If it is not available visit - `QLogic Driver Download Center <http://driverdownloads.qlogic.com>`_ + `linux-firmware git repository <https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/plain/bnx2x/bnx2x-e2-7.2.51.0.fw>`_ to get the required firmware. Pre-Installation Configuration @@ -102,14 +102,6 @@ enabling debugging options may affect system performance. to 'y'. Also, in order for firmware binary to load user will need zlib devel package installed. -- ``CONFIG_RTE_LIBRTE_BNX2X_DEBUG`` (default **n**) - - Toggle display of generic debugging messages. - -- ``CONFIG_RTE_LIBRTE_BNX2X_DEBUG_INIT`` (default **n**) - - Toggle display of initialization related messages. - - ``CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX`` (default **n**) Toggle display of transmit fast path run-time messages. diff --git a/doc/guides/nics/build_and_test.rst b/doc/guides/nics/build_and_test.rst index 2d70af88..d9a78eef 100644 --- a/doc/guides/nics/build_and_test.rst +++ b/doc/guides/nics/build_and_test.rst @@ -1,31 +1,5 @@ -.. BSD LICENSE - Copyright(c) 2017 Cavium, Inc. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions - are met: - - * Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in - the documentation and/or other materials provided with the - distribution. - * Neither the name of Cavium, Inc. nor the names of its - contributors may be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - OWNER(S) OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +.. SPDX-License-Identifier: BSD-3-Clause + Copyright(c) 2017 Cavium, Inc .. _pmd_build_and_test: @@ -177,3 +151,7 @@ This section demonstrates how to setup and run ``testpmd`` in Linux. Refer to the :ref:`testpmd runtime functions <testpmd_runtime>` for a list of available commands. + + .. note:: + When ``testpmd`` is built with shared library, use option ``-d`` to load + the dynamic PMD for ``rte_eal_init``. diff --git a/doc/guides/nics/dpaa.rst b/doc/guides/nics/dpaa.rst index d331c053..0a13996c 100644 --- a/doc/guides/nics/dpaa.rst +++ b/doc/guides/nics/dpaa.rst @@ -1,31 +1,6 @@ -.. BSD LICENSE - Copyright 2017 NXP. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions - are met: - - * Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in - the documentation and/or other materials provided with the - distribution. - * Neither the name of NXP nor the names of its - contributors may be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +.. SPDX-License-Identifier: BSD-3-Clause + Copyright 2017 NXP + DPAA Poll Mode Driver ===================== @@ -315,6 +290,17 @@ state during application initialization: In case the application is configured to use lesser number of queues than configured above, it might result in packet loss (because of distribution). +- ``DPAA_PUSH_QUEUES_NUMBER`` (default 4) + + This defines the number of High performance queues to be used for ethdev Rx. + These queues use one private HW portal per queue configured, so they are + limited in the system. The first configured ethdev queues will be + automatically be assigned from the these high perf PUSH queues. Any queue + configuration beyond that will be standard Rx queues. The application can + choose to change their number if HW portals are limited. + The valid values are from '0' to '4'. The valuse shall be set to '0' if the + application want to use eventdev with DPAA device. + Driver compilation and testing ------------------------------ diff --git a/doc/guides/nics/dpaa2.rst b/doc/guides/nics/dpaa2.rst index 85bc0488..9c66edd4 100644 --- a/doc/guides/nics/dpaa2.rst +++ b/doc/guides/nics/dpaa2.rst @@ -1,31 +1,6 @@ -.. BSD LICENSE - Copyright 2016 NXP. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions - are met: - - * Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in - the documentation and/or other materials provided with the - distribution. - * Neither the name of NXP nor the names of its - contributors may be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +.. SPDX-License-Identifier: BSD-3-Clause + Copyright 2016 NXP + DPAA2 Poll Mode Driver ====================== diff --git a/doc/guides/nics/e1000em.rst b/doc/guides/nics/e1000em.rst index 265b147a..b6a2534e 100644 --- a/doc/guides/nics/e1000em.rst +++ b/doc/guides/nics/e1000em.rst @@ -1,32 +1,5 @@ -.. BSD LICENSE - Copyright(c) 2010-2014 Intel Corporation. All rights reserved. - All rights reserved. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions - are met: - - * Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in - the documentation and/or other materials provided with the - distribution. - * Neither the name of Intel Corporation nor the names of its - contributors may be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +.. SPDX-License-Identifier: BSD-3-Clause + Copyright(c) 2010-2014 Intel Corporation. Driver for VM Emulated Devices ============================== diff --git a/doc/guides/nics/enic.rst b/doc/guides/nics/enic.rst index cb5ae125..4dffce1a 100644 --- a/doc/guides/nics/enic.rst +++ b/doc/guides/nics/enic.rst @@ -52,9 +52,6 @@ Configuration information - **CONFIG_RTE_LIBRTE_ENIC_PMD** (default y): Enables or disables inclusion of the ENIC PMD driver in the DPDK compilation. - - **CONFIG_RTE_LIBRTE_ENIC_DEBUG** (default n): Enables or disables debug - logging within the ENIC PMD driver. - - **vNIC Configuration Parameters** - **Number of Queues** @@ -66,7 +63,7 @@ Configuration information These values should be configured as follows: - The number of WQs should be greater or equal to the value of the - expected nb_tx_q parameter in the call to the + expected nb_tx_q parameter in the call to rte_eth_dev_configure() - The number of RQs configured in the vNIC should be greater or @@ -88,7 +85,7 @@ Configuration information - **Size of Queues** Likewise, the number of receive and transmit descriptors are configurable on - a per vNIC bases via the UCS Manager and should be greater than or equal to + a per-vNIC basis via the UCS Manager and should be greater than or equal to the nb_rx_desc and nb_tx_desc parameters expected to be used in the calls to rte_eth_rx_queue_setup() and rte_eth_tx_queue_setup() respectively. An application requesting more than the set size will be limited to that @@ -101,7 +98,7 @@ Configuration information - *Note*: Since the introduction of Rx scatter, for performance reasons, this PMD uses two RQs on the vNIC per receive queue in - DPDK. One RQ holds descriptors for the start of a packet the + DPDK. One RQ holds descriptors for the start of a packet, and the second RQ holds the descriptors for the rest of the fragments of a packet. This means that the nb_rx_desc parameter to rte_eth_rx_queue_setup() can be a greater than 4096. The exact @@ -110,7 +107,7 @@ Configuration information For example: If the mbuf size is 2048, and the MTU is 9000, then receiving a full size packet will take 5 descriptors, 1 from the - start of packet queue, and 4 from the second queue. Assuming + start-of-packet queue, and 4 from the second queue. Assuming that the RQ size was set to the maximum of 4096, then the application can specify up to 1024 + 4096 as the nb_rx_desc parameter to rte_eth_rx_queue_setup(). @@ -156,7 +153,7 @@ host to route intra-host VM traffic. Please refer to `Creating a Dynamic vNIC Connection Policy <http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/vm_fex/vmware/gui/config_guide/b_GUI_VMware_VM-FEX_UCSM_Configuration_Guide/b_GUI_VMware_VM-FEX_UCSM_Configuration_Guide_chapter_010.html#task_433E01651F69464783A68E66DA8A47A5>`_ -for information on configuring SR-IOV Adapter policies using UCS manager. +for information on configuring SR-IOV adapter policies using UCS manager. Once the policies are in place and the host OS is rebooted, VFs should be visible on the host, E.g.: @@ -222,15 +219,15 @@ Generic Flow API is supported. The baseline support is: - **1200 series VICs** - 5-tuple exact Flow support for 1200 series adapters. This allows: + 5-tuple exact flow support for 1200 series adapters. This allows: - Attributes: ingress - Items: ipv4, ipv6, udp, tcp (must exactly match src/dst IP - addresses and ports and all must be specified). + addresses and ports and all must be specified) - Actions: queue and void - Selectors: 'is' -- **1300 series VICS with Advanced filters disabled** +- **1300 series VICS with advanced filters disabled** With advanced filters disabled, an IPv4 or IPv6 item must be specified in the pattern. @@ -239,15 +236,15 @@ Generic Flow API is supported. The baseline support is: - Items: eth, ipv4, ipv6, udp, tcp, vxlan, inner eth, ipv4, ipv6, udp, tcp - Actions: queue and void - Selectors: 'is', 'spec' and 'mask'. 'last' is not supported - - In total, up to 64 bytes of mask is allowed across all haeders + - In total, up to 64 bytes of mask is allowed across all headers -- **1300 series VICS with Advanced filters enabled** +- **1300 series VICS with advanced filters enabled** - Attributes: ingress - Items: eth, ipv4, ipv6, udp, tcp, vxlan, inner eth, ipv4, ipv6, udp, tcp - Actions: queue, mark, flag and void - Selectors: 'is', 'spec' and 'mask'. 'last' is not supported - - In total, up to 64 bytes of mask is allowed across all haeders + - In total, up to 64 bytes of mask is allowed across all headers More features may be added in future firmware and new versions of the VIC. Please refer to the release notes. @@ -268,8 +265,8 @@ Limitations connected point-to-point to another adapter port or connected though a router instead of a switch, all ingress packets will be VLAN tagged. Programs such as l3fwd which do not account for VLAN tags in packets will misbehave. The - solution is to enable VLAN stripping on ingress. The follow code fragment is - example of how to accomplish this: + solution is to enable VLAN stripping on ingress. The following code fragment is + an example of how to accomplish this: .. code-block:: console @@ -291,7 +288,7 @@ Limitations - VF devices are not usable directly from the host. They can only be used as assigned devices on VM instances. - Currently, unbind of the ENIC kernel mode driver 'enic.ko' on the VM - instance may hang. As a workaround, enic.ko should blacklisted or removed + instance may hang. As a workaround, enic.ko should be blacklisted or removed from the boot process. - pci_generic cannot be used as the uio module in the VM. igb_uio or vfio in non-IOMMU mode can be used. @@ -304,7 +301,7 @@ Limitations - The number of filters that can be specified with the Generic Flow API is dependent on how many header fields are being masked. Use 'flow create' in a loop to determine how many filters your VIC will support (not more than - 1000 for 1300 series VICs). Filter are checked for matching in the order they + 1000 for 1300 series VICs). Filters are checked for matching in the order they were added. Since there currently is no grouping or priority support, 'catch-all' filters should be added last. @@ -317,8 +314,6 @@ the ENIC PMD library will be built into the DPDK library. Refer to the document :ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>` for details. -By default the ENIC PMD library will be built into the DPDK library. - For configuring and using UIO and VFIO frameworks, please refer to the documentation that comes with DPDK suite. @@ -363,7 +358,7 @@ Supported features - IPV4, IPV6 and TCP RSS hashing - Scattered Rx - MTU update -- SR-IOV on UCS managed servers connected to Fabric Interconnects. +- SR-IOV on UCS managed servers connected to Fabric Interconnects - Flow API Known bugs and unsupported features in this release @@ -372,7 +367,7 @@ Known bugs and unsupported features in this release - Signature or flex byte based flow direction - Drop feature of flow direction - VLAN based flow direction -- non-IPV4 flow direction +- Non-IPV4 flow direction - Setting of extended VLAN - UDP RSS hashing - MTU update only works if Scattered Rx mode is disabled @@ -381,15 +376,15 @@ Prerequisites ------------- - Prepare the system as recommended by DPDK suite. This includes environment - variables, hugepages configuration, tool-chains and configuration + variables, hugepages configuration, tool-chains and configuration. - Insert vfio-pci kernel module using the command 'modprobe vfio-pci' if the - user wants to use VFIO framework + user wants to use VFIO framework. - Insert uio kernel module using the command 'modprobe uio' if the user wants - to use UIO framework + to use UIO framework. - DPDK suite should be configured based on the user's decision to use VFIO or - UIO framework + UIO framework. - If the vNIC device(s) to be used is bound to the kernel mode Ethernet driver - use 'ifconfig' to bring the interface down. The dpdk-devbind.py tool can + use 'ip' to bring the interface down. The dpdk-devbind.py tool can then be used to unbind the device's bus id from the ENIC kernel mode driver. - Bind the intended vNIC to vfio-pci in case the user wants ENIC PMD to use VFIO framework using dpdk-devbind.py. @@ -422,7 +417,8 @@ libraries and the initialization time of the application. Additional Reference -------------------- -- http://www.cisco.com/c/en/us/products/servers-unified-computing +- https://www.cisco.com/c/en/us/products/servers-unified-computing/index.html +- https://www.cisco.com/c/en/us/products/interfaces-modules/unified-computing-system-adapters/index.html Contact Information ------------------- diff --git a/doc/guides/nics/fail_safe.rst b/doc/guides/nics/fail_safe.rst index c4e3d2e8..3f72b593 100644 --- a/doc/guides/nics/fail_safe.rst +++ b/doc/guides/nics/fail_safe.rst @@ -93,6 +93,14 @@ Fail-safe command line parameters additional sub-device parameters if need be. They will be passed on to the sub-device. +.. note:: + + In case of whitelist sub-device probed by EAL, fail-safe PMD will take the device + as is, which means that EAL device options are taken in this case. + When trying to use a PCI device automatically probed in blacklist mode, + the syntax for the fail-safe must be with the full PCI id: + Domain:Bus:Device.Function. See the usage example section. + - **exec(<shell command>)** parameter This parameter allows the user to provide a command to the fail-safe PMD to @@ -106,6 +114,15 @@ Fail-safe command line parameters All commas within the ``shell command`` are replaced by spaces before executing the command. This helps using scripts to specify devices. +- **fd(<file descriptor number>)** parameter + + This parameter reads a device definition from an arbitrary file descriptor + number in ``<iface>`` format as described above. + + The file descriptor is read in non-blocking mode and is never closed in + order to take only the last line into account (unlike ``exec()``) at every + probe attempt. + - **mac** parameter [MAC address] This parameter allows the user to set a default MAC address to the fail-safe @@ -160,6 +177,15 @@ This section shows some example of using **testpmd** with a fail-safe PMD. $RTE_TARGET/build/app/testpmd -c 0xff -n 4 --no-pci \ --vdev='net_failsafe0,exec(echo 84:00.0)' -- -i +#. Start testpmd, automatically probing the device 84:00.0 and using it with + the fail-safe. + + .. code-block:: console + + $RTE_TARGET/build/app/testpmd -c 0xff -n 4 \ + --vdev 'net_failsafe0,dev(0000:84:00.0),dev(net_ring0)' -- -i + + Using the Fail-safe PMD from an application ------------------------------------------- diff --git a/doc/guides/nics/features.rst b/doc/guides/nics/features.rst index d5bf38a2..1b4fb979 100644 --- a/doc/guides/nics/features.rst +++ b/doc/guides/nics/features.rst @@ -1,32 +1,5 @@ -.. BSD LICENSE - Copyright(c) 2017 Intel Corporation. All rights reserved. - All rights reserved. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions - are met: - - * Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in - the documentation and/or other materials provided with the - distribution. - * Neither the name of Intel Corporation nor the names of its - contributors may be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +.. SPDX-License-Identifier: BSD-3-Clause + Copyright(c) 2017 Intel Corporation. Features Overview ================= diff --git a/doc/guides/nics/features/avf.ini b/doc/guides/nics/features/avf.ini new file mode 100644 index 00000000..ccb9edde --- /dev/null +++ b/doc/guides/nics/features/avf.ini @@ -0,0 +1,37 @@ +; +; Supported features of the 'avf' network poll mode driver. +; +; Refer to default.ini for the full list of available PMD features. +; +[Features] +Speed capabilities = Y +Link status = Y +Link status event = Y +Rx interrupt = Y +Queue start/stop = Y +MTU update = Y +Jumbo frame = Y +Scattered Rx = Y +TSO = Y +Promiscuous mode = Y +Allmulticast mode = Y +Unicast MAC filter = Y +Multicast MAC filter = Y +RSS hash = Y +RSS key update = Y +RSS reta update = Y +VLAN filter = Y +CRC offload = Y +VLAN offload = Y +L3 checksum offload = Y +L4 checksum offload = Y +Packet type parsing = Y +Rx descriptor status = Y +Tx descriptor status = Y +Basic stats = Y +Multiprocess aware = Y +BSD nic_uio = Y +Linux UIO = Y +Linux VFIO = Y +x86-32 = Y +x86-64 = Y diff --git a/doc/guides/nics/features/avf_vec.ini b/doc/guides/nics/features/avf_vec.ini new file mode 100644 index 00000000..89249948 --- /dev/null +++ b/doc/guides/nics/features/avf_vec.ini @@ -0,0 +1,37 @@ +; +; Supported features of the 'avf_vec' network poll mode driver. +; +; Refer to default.ini for the full list of available PMD features. +; +[Features] +Speed capabilities = Y +Link status = Y +Link status event = Y +Rx interrupt = Y +Queue start/stop = Y +MTU update = Y +Jumbo frame = Y +Scattered Rx = Y +TSO = Y +Promiscuous mode = Y +Allmulticast mode = Y +Unicast MAC filter = Y +Multicast MAC filter = Y +RSS hash = Y +RSS key update = Y +RSS reta update = Y +VLAN filter = Y +CRC offload = Y +VLAN offload = P +L3 checksum offload = P +L4 checksum offload = P +Packet type parsing = Y +Rx descriptor status = Y +Tx descriptor status = Y +Basic stats = Y +Multiprocess aware = Y +BSD nic_uio = Y +Linux UIO = Y +Linux VFIO = Y +x86-32 = Y +x86-64 = Y diff --git a/doc/guides/nics/features/bnxt.ini b/doc/guides/nics/features/bnxt.ini index ef45dd76..a534e306 100644 --- a/doc/guides/nics/features/bnxt.ini +++ b/doc/guides/nics/features/bnxt.ini @@ -4,7 +4,9 @@ ; Refer to default.ini for the full list of available PMD features. ; [Features] +Speed capabilities = Y Link status = Y +Link status event = Y Rx interrupt = Y Queue start/stop = Y MTU update = Y @@ -23,13 +25,16 @@ SR-IOV = Y VLAN filter = Y Ethertype filter = Y N-tuple filter = Y +Flow director = Y Flow control = Y Flow API = Y +CRC offload = Y L3 checksum offload = Y L4 checksum offload = Y Inner L3 checksum = Y Inner L4 checksum = Y Packet type parsing = Y +Timesync = Y VLAN offload = Y Rx descriptor status = Y Tx descriptor status = Y @@ -40,4 +45,6 @@ EEPROM dump = Y LED = Y Linux UIO = Y Linux VFIO = Y +ARMv8 = Y +x86-32 = Y x86-64 = Y diff --git a/doc/guides/nics/features/failsafe.ini b/doc/guides/nics/features/failsafe.ini index a42e344a..39ee5796 100644 --- a/doc/guides/nics/features/failsafe.ini +++ b/doc/guides/nics/features/failsafe.ini @@ -6,6 +6,7 @@ [Features] Link status = Y Link status event = Y +Rx interrupt = Y MTU update = Y Jumbo frame = Y Promiscuous mode = Y diff --git a/doc/guides/nics/features/nfp_pf.ini b/doc/guides/nics/features/nfp.ini index d2899e7f..d2899e7f 100644 --- a/doc/guides/nics/features/nfp_pf.ini +++ b/doc/guides/nics/features/nfp.ini diff --git a/doc/guides/nics/features/sfc_efx.ini b/doc/guides/nics/features/sfc_efx.ini index 03890f30..8a497ee0 100644 --- a/doc/guides/nics/features/sfc_efx.ini +++ b/doc/guides/nics/features/sfc_efx.ini @@ -7,6 +7,7 @@ Speed capabilities = Y Link status = Y Link status event = Y +Fast mbuf free = Y Queue start/stop = Y MTU update = Y Jumbo frame = Y @@ -24,6 +25,8 @@ Flow API = Y VLAN offload = P L3 checksum offload = Y L4 checksum offload = Y +Inner L3 checksum = Y +Inner L4 checksum = Y Packet type parsing = Y Rx descriptor status = Y Tx descriptor status = Y diff --git a/doc/guides/nics/features/tap.ini b/doc/guides/nics/features/tap.ini index f0e893d6..519cad92 100644 --- a/doc/guides/nics/features/tap.ini +++ b/doc/guides/nics/features/tap.ini @@ -7,7 +7,7 @@ Speed capabilities = P Link status = Y Link status event = Y -Jumbo frame = Y +Rx interrupt = Y Promiscuous mode = Y Allmulticast mode = Y Basic stats = Y diff --git a/doc/guides/nics/features/vdev_netvsc.ini b/doc/guides/nics/features/vdev_netvsc.ini new file mode 100644 index 00000000..cfc5cb93 --- /dev/null +++ b/doc/guides/nics/features/vdev_netvsc.ini @@ -0,0 +1,12 @@ +; +; Supported features of the 'vdev_netvsc' network poll mode driver. +; +; Refer to default.ini for the full list of available PMD features. +; +[Features] +ARMv7 = Y +ARMv8 = Y +Power8 = Y +x86-32 = Y +x86-64 = Y +Usage doc = Y diff --git a/doc/guides/nics/fm10k.rst b/doc/guides/nics/fm10k.rst index b47fc0db..c44e226e 100644 --- a/doc/guides/nics/fm10k.rst +++ b/doc/guides/nics/fm10k.rst @@ -1,32 +1,5 @@ -.. BSD LICENSE - Copyright(c) 2015-2016 Intel Corporation. All rights reserved. - All rights reserved. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions - are met: - - * Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in - the documentation and/or other materials provided with the - distribution. - * Neither the name of Intel Corporation nor the names of its - contributors may be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +.. SPDX-License-Identifier: BSD-3-Clause + Copyright(c) 2015-2016 Intel Corporation. FM10K Poll Mode Driver ====================== diff --git a/doc/guides/nics/i40e.rst b/doc/guides/nics/i40e.rst index cd468748..e1b8083c 100644 --- a/doc/guides/nics/i40e.rst +++ b/doc/guides/nics/i40e.rst @@ -1,32 +1,5 @@ -.. BSD LICENSE - Copyright(c) 2016 Intel Corporation. All rights reserved. - All rights reserved. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions - are met: - - * Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in - the documentation and/or other materials provided with the - distribution. - * Neither the name of Intel Corporation nor the names of its - contributors may be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +.. SPDX-License-Identifier: BSD-3-Clause + Copyright(c) 2016 Intel Corporation. I40E Poll Mode Driver ====================== @@ -65,7 +38,8 @@ Features of the I40E PMD are: - Hot plug - IEEE1588/802.1AS timestamping - VF Daemon (VFD) - EXPERIMENTAL - +- Dynamic Device Personalization (DDP) +- Queue region configuration Prerequisites ------------- @@ -115,10 +89,6 @@ Please note that enabling debugging options may affect system performance. Number of queues reserved for PF. -- ``CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VF`` (default ``4``) - - Number of queues reserved for each SR-IOV VF. - - ``CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM`` (default ``4``) Number of queues reserved for each VMDQ Pool. @@ -128,6 +98,29 @@ Please note that enabling debugging options may affect system performance. Interrupt Throttling interval. +Runtime Config Options +~~~~~~~~~~~~~~~~~~~~~~ + +- ``Number of Queues per VF`` (default ``4``) + + The number of queue per VF is determined by its host PF. If the PCI address + of an i40e PF is aaaa:bb.cc, the number of queues per VF can be configured + with EAL parameter like -w aaaa:bb.cc,queue-num-per-vf=n. The value n can be + 1, 2, 4, 8 or 16. If no such parameter is configured, the number of queues + per VF is 4 by default. + +- ``Support multiple driver`` (default ``disable``) + + There was a multiple driver support issue during use of 700 series Ethernet + Adapter with both Linux kernel and DPDK PMD. To fix this issue, ``devargs`` + parameter ``support-multi-driver`` is introduced, for example:: + + -w 84:00.0,support-multi-driver=1 + + With the above configuration, DPDK PMD will not change global registers, and + will switch PF interrupt from IntN to Int0 to avoid interrupt conflict between + DPDK and Linux Kernel. + Driver compilation and testing ------------------------------ @@ -374,6 +367,75 @@ configuration passed on the EAL command line. The floating VEB functionality requires a NIC firmware version of 5.0 or greater. +Dynamic Device Personalization (DDP) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The Intel® Ethernet Controller X*710 support a feature called "Dynamic Device +Personalization (DDP)", which is used to configure hardware by downloading +a profile to support protocols/filters which are not supported by default. +The DDP functionality requires a NIC firmware version of 6.0 or greater. + +Current implementation supports MPLSoUDP/MPLSoGRE/GTP-C/GTP-U/PPPoE/PPPoL2TP, +steering can be used with rte_flow API. + +Load a profile which supports MPLSoUDP/MPLSoGRE and store backup profile: + +.. code-block:: console + + testpmd> ddp add 0 ./mpls.pkgo,./backup.pkgo + +Delete a MPLS profile and restore backup profile: + +.. code-block:: console + + testpmd> ddp del 0 ./backup.pkgo + +Get loaded DDP package info list: + +.. code-block:: console + + testpmd> ddp get list 0 + +Display information about a MPLS profile: + +.. code-block:: console + + testpmd> ddp get info ./mpls.pkgo + +Input set configuration +~~~~~~~~~~~~~~~~~~~~~~~ +Input set for any PCTYPE can be configured with user defined configuration, +For example, to use only 48bit prefix for IPv6 src address for IPv6 TCP RSS: + +.. code-block:: console + + testpmd> port config 0 pctype 43 hash_inset clear all + testpmd> port config 0 pctype 43 hash_inset set field 13 + testpmd> port config 0 pctype 43 hash_inset set field 14 + testpmd> port config 0 pctype 43 hash_inset set field 15 + +Queue region configuration +~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The Ethernet Controller X710/XL710 supports a feature of queue regions +configuration for RSS in the PF, so that different traffic classes or +different packet classification types can be separated to different +queues in different queue regions. There is an API for configuration +of queue regions in RSS with a command line. It can parse the parameters +of the region index, queue number, queue start index, user priority, traffic +classes and so on. Depending on commands from the command line, it will call +i40e private APIs and start the process of setting or flushing the queue +region configuration. As this feature is specific for i40e only private +APIs are used. These new ``test_pmd`` commands are as shown below. For +details please refer to :doc:`../testpmd_app_ug/index`. + +.. code-block:: console + + testpmd> set port (port_id) queue-region region_id (value) \ + queue_start_index (value) queue_num (value) + testpmd> set port (port_id) queue-region region_id (value) flowtype (value) + testpmd> set port (port_id) queue-region UP (value) region_id (value) + testpmd> set port (port_id) queue-region flush (on|off) + testpmd> show port (port_id) queue-region Limitations or Known issues --------------------------- @@ -483,6 +545,23 @@ Vlan strip of VF The VF vlan strip function is only supported in the i40e kernel driver >= 2.1.26. +DCB function +~~~~~~~~~~~~ + +DCB works only when RSS is enabled. + +Global configuration warning +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +I40E PMD will set some global registers to enable some function or set some +configure. Then when using different ports of the same NIC with Linux kernel +and DPDK, the port with Linux kernel will be impacted by the port with DPDK. +For example, register I40E_GL_SWT_L2TAGCTRL is used to control L2 tag, i40e +PMD uses I40E_GL_SWT_L2TAGCTRL to set vlan TPID. If setting TPID in port A +with DPDK, then the configuration will also impact port B in the NIC with +kernel driver, which don't want to use the TPID. +So PMD reports warning to clarify what is changed by writing global register. + High Performance of Small Packets on 40G NIC -------------------------------------------- diff --git a/doc/guides/nics/igb.rst b/doc/guides/nics/igb.rst new file mode 100644 index 00000000..0171622f --- /dev/null +++ b/doc/guides/nics/igb.rst @@ -0,0 +1,38 @@ +.. SPDX-License-Identifier: BSD-3-Clause + Copyright(c) 2017 Intel Corporation. + +IGB Poll Mode Driver +==================== + +The IGB PMD (``librte_pmd_e1000``) provides poll mode driver +support for Intel 1GbE nics. + +Features +-------- + +Features of the IGB PMD are: + +* Multiple queues for TX and RX +* Receiver Side Scaling (RSS) +* MAC/VLAN filtering +* Packet type information +* Double VLAN +* IEEE 1588 +* TSO offload +* Checksum offload +* TCP segmentation offload +* Jumbo frames supported + + +Limitations or Known issues +--------------------------- + + +Supported Chipsets and NICs +--------------------------- + +- Intel 82576EB 10 Gigabit Ethernet Controller +- Intel 82580EB 10 Gigabit Ethernet Controller +- Intel 82580DB 10 Gigabit Ethernet Controller +- Intel Ethernet Controller I210 +- Intel Ethernet Controller I350 diff --git a/doc/guides/nics/index.rst b/doc/guides/nics/index.rst index 23babe93..59419f43 100644 --- a/doc/guides/nics/index.rst +++ b/doc/guides/nics/index.rst @@ -1,32 +1,5 @@ -.. BSD LICENSE - Copyright(c) 2010-2014 Intel Corporation. All rights reserved. - All rights reserved. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions - are met: - - * Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in - the documentation and/or other materials provided with the - distribution. - * Neither the name of Intel Corporation nor the names of its - contributors may be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +.. SPDX-License-Identifier: BSD-3-Clause + Copyright(c) 2010-2014 Intel Corporation. Network Interface Controller Drivers ==================================== @@ -50,6 +23,7 @@ Network Interface Controller Drivers enic fm10k i40e + igb ixgbe intel_vf kni @@ -64,6 +38,7 @@ Network Interface Controller Drivers szedata2 tap thunderx + vdev_netvsc virtio vhost vmxnet3 diff --git a/doc/guides/nics/intel_vf.rst b/doc/guides/nics/intel_vf.rst index 1e83bf6e..49a7085a 100644 --- a/doc/guides/nics/intel_vf.rst +++ b/doc/guides/nics/intel_vf.rst @@ -1,35 +1,8 @@ -.. BSD LICENSE - Copyright(c) 2010-2014 Intel Corporation. All rights reserved. - All rights reserved. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions - are met: - - * Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in - the documentation and/or other materials provided with the - distribution. - * Neither the name of Intel Corporation nor the names of its - contributors may be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -I40E/IXGBE/IGB Virtual Function Driver -====================================== +.. SPDX-License-Identifier: BSD-3-Clause + Copyright(c) 2010-2014 Intel Corporation. + +Intel Virtual Function Driver +============================= Supported Intel® Ethernet Controllers (see the *DPDK Release Notes* for details) support the following modes of operation in a virtualized environment: @@ -93,6 +66,28 @@ and the Physical Function operates on the global resources on behalf of the Virt For this out-of-band communication, an SR-IOV enabled NIC provides a memory buffer for each Virtual Function, which is called a "Mailbox". +Intel® Ethernet Adaptive Virtual Function +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Adaptive Virtual Function (AVF) is a SR-IOV Virtual Function with the same device id (8086:1889) on different Intel Ethernet Controller. +AVF Driver is VF driver which supports for all future Intel devices without requiring a VM update. And since this happens to be an adaptive VF driver, +every new drop of the VF driver would add more and more advanced features that can be turned on in the VM if the underlying HW device supports those +advanced features based on a device agnostic way without ever compromising on the base functionality. AVF provides generic hardware interface and +interface between AVF driver and a compliant PF driver is specified. + +Intel products starting Ethernet Controller 700 Series to support Adaptive Virtual Function. + +The way to generate Virtual Function is like normal, and the resource of VF assignment depends on the NIC Infrastructure. + +For more detail on SR-IOV, please refer to the following documents: + +* `Intel® AVF HAS <https://www.intel.com/content/dam/www/public/us/en/documents/product-specifications/ethernet-adaptive-virtual-function-hardware-spec.pdf>`_ + +.. note:: + + To use DPDK AVF PMD on Intel® 700 Series Ethernet Controller, the device id (0x1889) need to specified during device + assignment in hypervisor. Take qemu for example, the device assignment should carry the AVF device id (0x1889) like + ``-device vfio-pci,x-pci-device-id=0x1889,host=03:0a.0``. + The PCIE host-interface of Intel Ethernet Switch FM10000 Series VF infrastructure ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ @@ -509,6 +504,19 @@ The setup procedure is as follows: For more information, please refer to: `http://wiki.qemu.org/Features/CPUModels <http://wiki.qemu.org/Features/CPUModels>`_. +#. If use vfio-pci to pass through device instead of pci-assign, steps 8 and 9 need to be updated to bind device to vfio-pci and + replace pci-assign with vfio-pci when start virtual machine. + + .. code-block:: console + + sudo /sbin/modprobe vfio-pci + + echo "8086 10ed" > /sys/bus/pci/drivers/vfio-pci/new_id + echo 0000:08:10.0 > /sys/bus/pci/devices/0000:08:10.0/driver/unbind + echo 0000:08:10.0 > /sys/bus/pci/drivers/vfio-pci/bind + + /usr/local/kvm/bin/qemu-system-x86_64 -m 4096 -smp 4 -boot c -hda lucid.qcow2 -device vfio-pci,host=08:10.0 + #. Install and run DPDK host app to take over the Physical Function. Eg. .. code-block:: console diff --git a/doc/guides/nics/ixgbe.rst b/doc/guides/nics/ixgbe.rst index d477ea05..0c660f29 100644 --- a/doc/guides/nics/ixgbe.rst +++ b/doc/guides/nics/ixgbe.rst @@ -1,32 +1,5 @@ -.. BSD LICENSE - Copyright(c) 2010-2016 Intel Corporation. All rights reserved. - All rights reserved. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions - are met: - - * Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in - the documentation and/or other materials provided with the - distribution. - * Neither the name of Intel Corporation nor the names of its - contributors may be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +.. SPDX-License-Identifier: BSD-3-Clause + Copyright(c) 2010-2016 Intel Corporation. IXGBE Driver ============ diff --git a/doc/guides/nics/kni.rst b/doc/guides/nics/kni.rst index 77542b56..204fbd56 100644 --- a/doc/guides/nics/kni.rst +++ b/doc/guides/nics/kni.rst @@ -1,32 +1,5 @@ -.. BSD LICENSE - Copyright(c) 2017 Intel Corporation. All rights reserved. - All rights reserved. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions - are met: - - * Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in - the documentation and/or other materials provided with the - distribution. - * Neither the name of Intel Corporation nor the names of its - contributors may be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +.. SPDX-License-Identifier: BSD-3-Clause + Copyright(c) 2017 Intel Corporation. KNI Poll Mode Driver ====================== diff --git a/doc/guides/nics/liquidio.rst b/doc/guides/nics/liquidio.rst index 7bc16040..61485ade 100644 --- a/doc/guides/nics/liquidio.rst +++ b/doc/guides/nics/liquidio.rst @@ -1,32 +1,5 @@ -.. BSD LICENSE - Copyright(c) 2017 Cavium, Inc.. All rights reserved. - All rights reserved. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions - are met: - - * Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in - the documentation and/or other materials provided with the - distribution. - * Neither the name of Cavium, Inc. nor the names of its - contributors may be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - OWNER(S) OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +.. SPDX-License-Identifier: BSD-3-Clause + Copyright(c) 2017 Cavium, Inc LiquidIO VF Poll Mode Driver ============================ diff --git a/doc/guides/nics/mlx4.rst b/doc/guides/nics/mlx4.rst index 22341b90..98b97166 100644 --- a/doc/guides/nics/mlx4.rst +++ b/doc/guides/nics/mlx4.rst @@ -86,20 +86,30 @@ These options can be modified in the ``.config`` file. Toggle compilation of librte_pmd_mlx4 itself. +- ``CONFIG_RTE_LIBRTE_MLX4_DLOPEN_DEPS`` (default **n**) + + Build PMD with additional code to make it loadable without hard + dependencies on **libibverbs** nor **libmlx4**, which may not be installed + on the target system. + + In this mode, their presence is still required for it to run properly, + however their absence won't prevent a DPDK application from starting (with + ``CONFIG_RTE_BUILD_SHARED_LIB`` disabled) and they won't show up as + missing with ``ldd(1)``. + + It works by moving these dependencies to a purpose-built rdma-core "glue" + plug-in, which must either be installed in ``CONFIG_RTE_EAL_PMD_PATH`` if + set, or in a standard location for the dynamic linker (e.g. ``/lib``) if + left to the default empty string (``""``). + + This option has no performance impact. + - ``CONFIG_RTE_LIBRTE_MLX4_DEBUG`` (default **n**) Toggle debugging code and stricter compilation flags. Enabling this option adds additional run-time checks and debugging messages at the cost of lower performance. -- ``CONFIG_RTE_LIBRTE_MLX4_DEBUG_BROKEN_VERBS`` (default **n**) - - Mellanox OFED versions earlier than 4.2 may return false errors from - Verbs object destruction APIs after the device is plugged out. - Enabling this option replaces assertion checks that cause the program - to abort with harmless debugging messages as a workaround. - Relevant only when CONFIG_RTE_LIBRTE_MLX4_DEBUG is enabled. - - ``CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE`` (default **8**) Maximum number of cached memory pools (MPs) per TX queue. Each MP from @@ -108,6 +118,18 @@ These options can be modified in the ``.config`` file. This value is always 1 for RX queues since they use a single MP. +Environment variables +~~~~~~~~~~~~~~~~~~~~~ + +- ``MLX4_GLUE_PATH`` + + A list of directories in which to search for the rdma-core "glue" plug-in, + separated by colons or semi-colons. + + Only matters when compiled with ``CONFIG_RTE_LIBRTE_MLX4_DLOPEN_DEPS`` + enabled and most useful when ``CONFIG_RTE_EAL_PMD_PATH`` is also set, + since ``LD_LIBRARY_PATH`` has no effect in this case. + Run-time configuration ~~~~~~~~~~~~~~~~~~~~~~ @@ -214,7 +236,7 @@ Current RDMA core package and Linux kernel (recommended) Mellanox OFED as a fallback ~~~~~~~~~~~~~~~~~~~~~~~~~~~ -- `Mellanox OFED`_ version: **4.2**. +- `Mellanox OFED`_ version: **4.2, 4.3**. - firmware version: **2.42.5000** and above. .. _`Mellanox OFED`: http://www.mellanox.com/page/products_dyn?product_family=26&mtag=linux_sw_drivers diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst index f9558da8..0e6e525c 100644 --- a/doc/guides/nics/mlx5.rst +++ b/doc/guides/nics/mlx5.rst @@ -105,10 +105,12 @@ Limitations ----------- - Inner RSS for VXLAN frames is not supported yet. -- Port statistics through software counters only. Flow statistics are - supported by hardware counters. - Hardware checksum RX offloads for VXLAN inner header are not supported yet. -- Forked secondary process not supported. +- For secondary process: + + - Forked secondary process not supported. + - All mempools must be initialized before rte_eth_dev_start(). + - Flow pattern without any specific vlan will match for vlan packets as well: When VLAN spec is not specified in the pattern, the matching rule will be created with VLAN as a wild card. @@ -129,11 +131,22 @@ Limitations - A multi segment packet must have less than 6 segments in case the Tx burst function is set to multi-packet send or Enhanced multi-packet send. Otherwise it must have less than 50 segments. -- Count action for RTE flow is only supported in Mellanox OFED 4.2. +- Count action for RTE flow is **only supported in Mellanox OFED**. - Flows with a VXLAN Network Identifier equal (or ends to be equal) to 0 are not supported. - VXLAN TSO and checksum offloads are not supported on VM. +Statistics +---------- + +MLX5 supports various of methods to report statistics: + +Port statistics can be queried using ``rte_eth_stats_get()``. The port statistics are through SW only and counts the number of packets received or sent successfully by the PMD. + +Extended statistics can be queried using ``rte_eth_xstats_get()``. The extended statistics expose a wider set of counters counted by the device. The extended port statistics counts the number of packets received or sent successfully by the port. As Mellanox NICs are using the :ref:`Bifurcated Linux Driver <linux_gsg_linux_drivers>` those counters counts also packet received or sent by the Linux kernel. The counters with ``_phy`` suffix counts the total events on the physical port, therefore not valid for VF. + +Finally per-flow statistics can by queried using ``rte_flow_query`` when attaching a count action for specific flow. The flow counter counts the number of packets received successfully by the port and match the specific flow. + Configuration ------------- @@ -146,6 +159,24 @@ These options can be modified in the ``.config`` file. Toggle compilation of librte_pmd_mlx5 itself. +- ``CONFIG_RTE_LIBRTE_MLX5_DLOPEN_DEPS`` (default **n**) + + Build PMD with additional code to make it loadable without hard + dependencies on **libibverbs** nor **libmlx5**, which may not be installed + on the target system. + + In this mode, their presence is still required for it to run properly, + however their absence won't prevent a DPDK application from starting (with + ``CONFIG_RTE_BUILD_SHARED_LIB`` disabled) and they won't show up as + missing with ``ldd(1)``. + + It works by moving these dependencies to a purpose-built rdma-core "glue" + plug-in, which must either be installed in ``CONFIG_RTE_EAL_PMD_PATH`` if + set, or in a standard location for the dynamic linker (e.g. ``/lib``) if + left to the default empty string (``""``). + + This option has no performance impact. + - ``CONFIG_RTE_LIBRTE_MLX5_DEBUG`` (default **n**) Toggle debugging code and stricter compilation flags. Enabling this option @@ -163,6 +194,15 @@ These options can be modified in the ``.config`` file. Environment variables ~~~~~~~~~~~~~~~~~~~~~ +- ``MLX5_GLUE_PATH`` + + A list of directories in which to search for the rdma-core "glue" plug-in, + separated by colons or semi-colons. + + Only matters when compiled with ``CONFIG_RTE_LIBRTE_MLX5_DLOPEN_DEPS`` + enabled and most useful when ``CONFIG_RTE_EAL_PMD_PATH`` is also set, + since ``LD_LIBRARY_PATH`` has no effect in this case. + - ``MLX5_PMD_ENABLE_PADDING`` Enables HW packet padding in PCI bus transactions. @@ -253,8 +293,9 @@ Run-time configuration Enhanced MPS supports hybrid mode - mixing inlined packets and pointers in the same descriptor. - This option cannot be used in conjunction with ``tso`` below. When ``tso`` - is set, ``txq_mpw_en`` is disabled. + This option cannot be used with certain offloads such as ``DEV_TX_OFFLOAD_TCP_TSO, + DEV_TX_OFFLOAD_VXLAN_TNL_TSO, DEV_TX_OFFLOAD_GRE_TNL_TSO, DEV_TX_OFFLOAD_VLAN_INSERT``. + When those offloads are requested the MPS send function will not be used. It is currently only supported on the ConnectX-4 Lx and ConnectX-5 families of adapters. Enabled by default. @@ -275,17 +316,15 @@ Run-time configuration Effective only when Enhanced MPS is supported. The default value is 256. -- ``tso`` parameter [int] - - A nonzero value enables hardware TSO. - When hardware TSO is enabled, packets marked with TCP segmentation - offload will be divided into segments by the hardware. Disabled by default. - - ``tx_vec_en`` parameter [int] A nonzero value enables Tx vector on ConnectX-5 only NIC if the number of global Tx queues on the port is lesser than MLX5_VPMD_MIN_TXQS. + This option cannot be used with certain offloads such as ``DEV_TX_OFFLOAD_TCP_TSO, + DEV_TX_OFFLOAD_VXLAN_TNL_TSO, DEV_TX_OFFLOAD_GRE_TNL_TSO, DEV_TX_OFFLOAD_VLAN_INSERT``. + When those offloads are requested the MPS send function will not be used. + Enabled by default on ConnectX-5. - ``rx_vec_en`` parameter [int] @@ -367,7 +406,7 @@ RMDA Core with Linux Kernel Mellanox OFED ^^^^^^^^^^^^^ -- Mellanox OFED version: **4.2**. +- Mellanox OFED version: **4.2, 4.3**. - firmware version: - ConnectX-4: **12.21.1000** and above. diff --git a/doc/guides/nics/mrvl.rst b/doc/guides/nics/mrvl.rst index fbfdf478..b7f32921 100644 --- a/doc/guides/nics/mrvl.rst +++ b/doc/guides/nics/mrvl.rst @@ -29,6 +29,8 @@ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +.. _mrvl_poll_mode_driver: + MRVL Poll Mode Driver ====================== @@ -87,31 +89,40 @@ Limitations Prerequisites ------------- -- Custom Linux Kernel sources available - `here <https://github.com/MarvellEmbeddedProcessors/linux-marvell/tree/linux-4.4.52-armada-17.08>`__. +- Custom Linux Kernel sources + + .. code-block:: console + + git clone https://github.com/MarvellEmbeddedProcessors/linux-marvell.git -b linux-4.4.52-armada-17.10 + +- Out of tree `mvpp2x_sysfs` kernel module sources -- Out of tree `mvpp2x_sysfs` kernel module sources available - `here <https://github.com/MarvellEmbeddedProcessors/mvpp2x-marvell/tree/mvpp2x-armada-17.08>`__. + .. code-block:: console -- MUSDK (Marvell User-Space SDK) sources available - `here <https://github.com/MarvellEmbeddedProcessors/musdk-marvell/tree/musdk-armada-17.08>`__. + git clone https://github.com/MarvellEmbeddedProcessors/mvpp2x-marvell.git -b mvpp2x-armada-17.10 - MUSDK is a light-weight library that provides direct access to Marvell's - PPv2 (Packet Processor v2). Alternatively prebuilt MUSDK library can be - requested from `Marvell Extranet <https://extranet.marvell.com>`_. Once - approval has been granted, library can be found by typing ``musdk`` in - the search box. +- MUSDK (Marvell User-Space SDK) sources - MUSDK must be configured with the following features: + .. code-block:: console - .. code-block:: console + git clone https://github.com/MarvellEmbeddedProcessors/musdk-marvell.git -b musdk-armada-17.10 - --enable-bpool-dma=64 + MUSDK is a light-weight library that provides direct access to Marvell's + PPv2 (Packet Processor v2). Alternatively prebuilt MUSDK library can be + requested from `Marvell Extranet <https://extranet.marvell.com>`_. Once + approval has been granted, library can be found by typing ``musdk`` in + the search box. + + MUSDK must be configured with the following features: + + .. code-block:: console + + --enable-bpool-dma=64 - DPDK environment - Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup - DPDK environment. + Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup + DPDK environment. Config File Options @@ -123,11 +134,6 @@ The following options can be modified in the ``config`` file. Toggle compilation of the librte_pmd_mrvl driver. -- ``CONFIG_RTE_MRVL_MUSDK_DMA_MEMSIZE`` (default ``41943040``) - - Size in bytes of the contiguous memory region that MUSDK will allocate - for run-time DMA-able data buffers. - QoS Configuration ----------------- @@ -142,7 +148,7 @@ Configuration syntax [port <portnum> default] default_tc = <default_tc> - qos_mode = <qos_priority> + mapping_priority = <mapping_priority> [port <portnum> tc <traffic_class>] rxq = <rx_queue_list> @@ -160,7 +166,7 @@ Where: - ``<default_tc>``: Default traffic class (e.g. 0) -- ``<qos_priority>``: QoS priority for mapping (`ip`, `vlan`, `ip/vlan` or `vlan/ip`). +- ``<mapping_priority>``: QoS priority for mapping (`ip`, `vlan`, `ip/vlan` or `vlan/ip`). - ``<traffic_class>``: Traffic Class to be configured. @@ -209,18 +215,34 @@ Usage example .. code-block:: console ./testpmd --vdev=eth_mrvl,iface=eth0,iface=eth2,cfg=/home/user/mrvl.conf \ - -c 7 -- -i -a --disable-hw-vlan-strip --rxq=2 + -c 7 -- -i -a --rxq=2 Building DPDK ------------- -Driver needs precompiled MUSDK library during compilation. Please consult -``doc/musdk_get_started.txt`` for the detailed build instructions. +Driver needs precompiled MUSDK library during compilation. + +.. code-block:: console + + export CROSS_COMPILE=<toolchain>/bin/aarch64-linux-gnu- + ./bootstrap + ./configure --host=aarch64-linux-gnu --enable-bpool-dma=64 + make install + +MUSDK will be installed to `usr/local` under current directory. +For the detailed build instructions please consult ``doc/musdk_get_started.txt``. Before the DPDK build process the environmental variable ``LIBMUSDK_PATH`` with the path to the MUSDK installation directory needs to be exported. +.. code-block:: console + + export LIBMUSDK_PATH=<musdk>/usr/local + export CROSS=aarch64-linux-gnu- + make config T=arm64-armv8a-linuxapp-gcc + sed -ri 's,(MRVL_PMD=)n,\1y,' build/.config + make Usage Example ------------- @@ -242,7 +264,7 @@ Additionally interfaces used by DPDK application need to be put up: .. code-block:: console ip link set eth0 up - ip link set eth1 up + ip link set eth2 up In order to run testpmd example application following command can be used: @@ -250,4 +272,4 @@ In order to run testpmd example application following command can be used: ./testpmd --vdev=eth_mrvl,iface=eth0,iface=eth2 -c 7 -- \ --burst=128 --txd=2048 --rxd=1024 --rxq=2 --txq=2 --nb-cores=2 \ - -i -a --disable-hw-vlan-strip --rss-udp + -i -a --rss-udp diff --git a/doc/guides/nics/octeontx.rst b/doc/guides/nics/octeontx.rst index 90bb9e5d..8e2a2b75 100644 --- a/doc/guides/nics/octeontx.rst +++ b/doc/guides/nics/octeontx.rst @@ -1,32 +1,5 @@ -.. BSD LICENSE - Copyright (C) Cavium, Inc. 2017. - All rights reserved. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions - are met: - - * Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in - the documentation and/or other materials provided with the - distribution. - * Neither the name of Cavium, Inc nor the names of its - contributors may be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +.. SPDX-License-Identifier: BSD-3-Clause + Copyright(c) 2017 Cavium, Inc OCTEONTX Poll Mode driver ========================= @@ -86,27 +59,6 @@ Please note that enabling debugging options may affect system performance. Toggle compilation of the ``librte_pmd_octeontx`` driver. -- ``CONFIG_RTE_LIBRTE_OCTEONTX_DEBUG_DRIVER`` (default ``n``) - - Toggle display of generic debugging messages - -- ``CONFIG_RTE_LIBRTE_OCTEONTX_DEBUG_INIT`` (default ``n``) - - Toggle display of initialization related messages. - -- ``CONFIG_RTE_LIBRTE_OCTEONTX_DEBUG_RX`` (default ``n``) - - Toggle display of receive path message - -- ``CONFIG_RTE_LIBRTE_OCTEONTX_DEBUG_TX`` (default ``n``) - - Toggle display of transmit path message - -- ``CONFIG_RTE_LIBRTE_OCTEONTX_DEBUG_MBOX`` (default ``n``) - - Toggle display of mbox related message - - Driver compilation and testing ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -136,8 +88,8 @@ following ``make`` command: --mbuf-pool-ops-name="octeontx_fpavf" \ --vdev='event_octeontx' \ --vdev='eth_octeontx,nr_port=2' \ - -- --rxq=1 --txq=1 --nb-core=2 --total-num-mbufs=16384 \ - --disable-hw-vlan-filter -i + -- --rxq=1 --txq=1 --nb-core=2 \ + --total-num-mbufs=16384 -i ..... EAL: Detected 24 lcore(s) EAL: Probing VFIO support... diff --git a/doc/guides/nics/pcap_ring.rst b/doc/guides/nics/pcap_ring.rst index 5e4f5f60..7fd063c9 100644 --- a/doc/guides/nics/pcap_ring.rst +++ b/doc/guides/nics/pcap_ring.rst @@ -1,38 +1,11 @@ -.. BSD LICENSE - Copyright(c) 2010-2015 Intel Corporation. All rights reserved. - All rights reserved. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions - are met: - - * Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in - the documentation and/or other materials provided with the - distribution. - * Neither the name of Intel Corporation nor the names of its - contributors may be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +.. SPDX-License-Identifier: BSD-3-Clause + Copyright(c) 2010-2015 Intel Corporation. Libpcap and Ring Based Poll Mode Drivers ======================================== In addition to Poll Mode Drivers (PMDs) for physical and virtual hardware, -the DPDK also includes two pure-software PMDs. These two drivers are: +the DPDK also includes pure-software PMDs, two of these drivers are: * A libpcap -based PMD (librte_pmd_pcap) that reads and writes packets using libpcap, - both from files on disk, as well as from physical NIC devices using standard Linux kernel drivers. @@ -175,6 +148,12 @@ Otherwise, the first 512 packets from the input pcap file will be discarded by t --vdev 'net_pcap0,rx_pcap=file_rx.pcap,tx_pcap=file_tx.pcap' \ -- --port-topology=chained --no-flush-rx +.. note:: + + The network interface provided to the PMD should be up. The PMD will return + an error if interface is down, and the PMD itself won't change the status + of the external network interface. + Rings-based PMD ~~~~~~~~~~~~~~~ diff --git a/doc/guides/nics/qede.rst b/doc/guides/nics/qede.rst index 84becc98..63ce9b4c 100644 --- a/doc/guides/nics/qede.rst +++ b/doc/guides/nics/qede.rst @@ -1,33 +1,6 @@ -.. BSD LICENSE - Copyright (c) 2016 QLogic Corporation - Copyright (c) 2017 Cavium Inc. - All rights reserved. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions - are met: - - * Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in - the documentation and/or other materials provided with the - distribution. - * Neither the name of QLogic Corporation nor the names of its - contributors may be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +.. SPDX-License-Identifier: BSD-3-Clause + Copyright(c) 2016 QLogic Corporation + Copyright(c) 2017 Cavium, Inc QEDE Poll Mode Driver ====================== @@ -62,14 +35,20 @@ Supported Features - N-tuple filter and flow director (limited support) - NPAR (NIC Partitioning) - SR-IOV VF -- VXLAN tunneling offload -- MPLSoUDP Tx tunnel offload +- VXLAN Tunneling offload +- GENEVE Tunneling offload +- MPLSoUDP Tx Tunneling offload Non-supported Features ---------------------- - SR-IOV PF -- GENEVE and NVGRE Tunneling offloads +- GRE and NVGRE Tunneling offloads + +Co-existence considerations +--------------------------- +- QLogic FastLinQ QL4xxxx CNAs can have both NIC and Storage personalities. However, coexistence with storage protocol drivers (qedi and qedf) is not supported on the same adapter. So storage personality has to be disabled on that adapter when used in DPDK applications. +- For SR-IOV case, qede PMD will be used to bind to SR-IOV VF device and Linux native kernel driver (qede) will be attached to SR-IOV PF. Supported QLogic Adapters ------------------------- @@ -114,14 +93,6 @@ enabling debugging options may affect system performance. Toggle compilation of QEDE PMD driver. -- ``CONFIG_RTE_LIBRTE_QEDE_DEBUG_INFO`` (default **n**) - - Toggle display of generic debugging messages. - -- ``CONFIG_RTE_LIBRTE_QEDE_DEBUG_DRIVER`` (default **n**) - - Toggle display of ecore related messages. - - ``CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX`` (default **n**) Toggle display of transmit fast path run-time messages. @@ -130,10 +101,6 @@ enabling debugging options may affect system performance. Toggle display of receive fast path run-time messages. -- ``CONFIG_RTE_LIBRTE_QEDE_VF_TX_SWITCH`` (default **"y"**) - - A knob to control per-VF Tx switching feature. - - ``CONFIG_RTE_LIBRTE_QEDE_FW`` (default **""**) Gives absolute path of firmware file. @@ -226,7 +193,7 @@ This section provides instructions to configure SR-IOV with Linux OS. #. Running testpmd - (Enable QEDE_DEBUG_INFO=y to view informational messages): + (Supply ``--log-level="pmd.net.qede.driver",7`` to view informational messages): Refer to the document :ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>` to run diff --git a/doc/guides/nics/sfc_efx.rst b/doc/guides/nics/sfc_efx.rst index ae2b54a2..ccdf5ff0 100644 --- a/doc/guides/nics/sfc_efx.rst +++ b/doc/guides/nics/sfc_efx.rst @@ -48,6 +48,8 @@ SFC EFX PMD has support for: - IPv4/IPv6 TCP/UDP transmit checksum offload +- Inner IPv4/IPv6 TCP/UDP transmit checksum offload + - Port hardware statistics - Extended statistics (see Solarflare Server Adapter User's Guide for @@ -69,6 +71,8 @@ SFC EFX PMD has support for: - IPv4/IPv6 TCP/UDP receive checksum offload +- Inner IPv4/IPv6 TCP/UDP receive checksum offload + - Received packet type information - Receive side scaling (RSS) @@ -116,6 +120,26 @@ required in the receive buffer. It should be taken into account when mbuf pool for receive is created. +Tunnels support +--------------- + +NVGRE, VXLAN and GENEVE tunnels are supported on SFN8xxx family adapters +with full-feature firmware variant running. +**sfboot** should be used to configure NIC to run full-feature firmware variant. +See Solarflare Server Adapter User's Guide for details. + +SFN8xxx family adapters provide either inner or outer packet classes. +If adapter firmware advertises support for tunnels then the PMD +configures the hardware to report inner classes, and outer classes are +not reported in received packets. +However, for VXLAN and GENEVE tunnels the PMD does report UDP as the +outer layer 4 packet type. + +SFN8xxx family adapters report GENEVE packets as VXLAN. +If UDP ports are configured for only one tunnel type then it is safe to +treat VXLAN packet type indication as the corresponding UDP tunnel type. + + Flow API support ---------------- @@ -168,8 +192,14 @@ Supported NICs - Solarflare SFN8522 Dual Port SFP+ Server Adapter + - Solarflare SFN8522M Dual Port SFP+ Server Adapter + + - Solarflare SFN8042 Dual Port QSFP+ Server Adapter + - Solarflare SFN8542 Dual Port QSFP+ Server Adapter + - Solarflare SFN8722 Dual Port SFP+ OCP Server Adapter + - Solarflare SFN7002F Dual Port SFP+ Server Adapter - Solarflare SFN7004F Quad Port SFP+ Server Adapter diff --git a/doc/guides/nics/tap.rst b/doc/guides/nics/tap.rst index 04086b11..ea61be38 100644 --- a/doc/guides/nics/tap.rst +++ b/doc/guides/nics/tap.rst @@ -1,37 +1,10 @@ -.. BSD LICENSE - Copyright(c) 2016 Intel Corporation. All rights reserved. - All rights reserved. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions - are met: - - * Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in - the documentation and/or other materials provided with the - distribution. - * Neither the name of Intel Corporation nor the names of its - contributors may be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -Tun/Tap Poll Mode Driver -======================== - -The ``rte_eth_tap.c`` PMD creates a device using TUN/TAP interfaces on the +.. SPDX-License-Identifier: BSD-3-Clause + Copyright(c) 2016 Intel Corporation. + +Tap Poll Mode Driver +==================== + +The ``rte_eth_tap.c`` PMD creates a device using TAP interfaces on the local host. The PMD allows for DPDK and the host to communicate using a raw device interface on the host and in the DPDK application. @@ -53,11 +26,6 @@ The interface name can be changed by adding the ``iface=foo0``, for example:: --vdev=net_tap0,iface=foo0 --vdev=net_tap1,iface=foo1, ... -Also the speed of the interface can be changed from 10G to whatever number -needed, but the interface does not enforce that speed, for example:: - - --vdev=net_tap0,iface=foo0,speed=25000 - Normally the PMD will generate a random MAC address, but when testing or with a static configuration the developer may need a fixed MAC address style. Using the option ``mac=fixed`` you can create a fixed known MAC address:: @@ -132,6 +100,7 @@ Supported actions: - DROP - QUEUE - PASSTHRU +- RSS (requires kernel 4.9) It is generally not possible to provide a "last" item. However, if the "last" item, once masked, is identical to the masked spec, then it is supported. @@ -161,10 +130,15 @@ Drop UDP packets in vlan 3:: testpmd> flow create 0 priority 3 ingress pattern eth / vlan vid is 3 / \ ipv4 proto is 17 / end actions drop / end +Distribute IPv4 TCP packets using RSS to a given MAC address over queues 0-3:: + + testpmd> flow create 0 priority 4 ingress pattern eth dst is 0a:0b:0c:0d:0e:0f \ + / ipv4 / tcp / end actions rss queues 0 1 2 3 end / end + Example ------- -The following is a simple example of using the TUN/TAP PMD with the Pktgen +The following is a simple example of using the TAP PMD with the Pktgen packet generator. It requires that the ``socat`` utility is installed on the test system. @@ -213,3 +187,77 @@ traffic is being looped back. You can use ``set all size XXX`` to change the size of the packets after you stop the traffic. Use pktgen ``help`` command to see a list of all commands. You can also use the ``-f`` option to load commands at startup in command line or Lua script in pktgen. + +RSS specifics +------------- +Packet distribution in TAP is done by the kernel which has a default +distribution. This feature is adding RSS distribution based on eBPF code. +The default eBPF code calculates RSS hash based on Toeplitz algorithm for +a fixed RSS key. It is calculated on fixed packet offsets. For IPv4 and IPv6 it +is calculated over src/dst addresses (8 or 32 bytes for IPv4 or IPv6 +respectively) and src/dst TCP/UDP ports (4 bytes). + +The RSS algorithm is written in file ``tap_bpf_program.c`` which +does not take part in TAP PMD compilation. Instead this file is compiled +in advance to eBPF object file. The eBPF object file is then parsed and +translated into eBPF byte code in the format of C arrays of eBPF +instructions. The C array of eBPF instructions is part of TAP PMD tree and +is taking part in TAP PMD compilation. At run time the C arrays are uploaded to +the kernel via BPF system calls and the RSS hash is calculated by the +kernel. + +It is possible to support different RSS hash algorithms by updating file +``tap_bpf_program.c`` In order to add a new RSS hash algorithm follow these +steps: + +1. Write the new RSS implementation in file ``tap_bpf_program.c`` + +BPF programs which are uploaded to the kernel correspond to +C functions under different ELF sections. + +2. Install ``LLVM`` library and ``clang`` compiler versions 3.7 and above + +3. Compile ``tap_bpf_program.c`` via ``LLVM`` into an object file:: + + clang -O2 -emit-llvm -c tap_bpf_program.c -o - | llc -march=bpf \ + -filetype=obj -o <tap_bpf_program.o> + + +4. Use a tool that receives two parameters: an eBPF object file and a section +name, and prints out the section as a C array of eBPF instructions. +Embed the C array in your TAP PMD tree. + +The C arrays are uploaded to the kernel using BPF system calls. + +``tc`` (traffic control) is a well known user space utility program used to +configure the Linux kernel packet scheduler. It is usually packaged as +part of the ``iproute2`` package. +Since commit 11c39b5e9 ("tc: add eBPF support to f_bpf") ``tc`` can be used +to uploads eBPF code to the kernel and can be patched in order to print the +C arrays of eBPF instructions just before calling the BPF system call. +Please refer to ``iproute2`` package file ``lib/bpf.c`` function +``bpf_prog_load()``. + +An example utility for eBPF instruction generation in the format of C arrays will +be added in next releases + +Systems supporting flow API +--------------------------- + +- "tc flower" classifier requires linux kernel above 4.2 +- eBPF/RSS requires linux kernel above 4.9 + ++--------------------+-----------------------+ +| RH7.3 | No flow rule support | ++--------------------+-----------------------+ +| RH7.4 | No RSS action support | ++--------------------+-----------------------+ +| RH7.5 | No RSS action support | ++--------------------+-----------------------+ +| SLES 15, | No limitation | +| kernel 4.12 | | ++--------------------+-----------------------+ +| Azure Ubuntu 16.04,| No limitation | +| kernel 4.13 | | ++--------------------+-----------------------+ + diff --git a/doc/guides/nics/thunderx.rst b/doc/guides/nics/thunderx.rst index 45bc690a..5270ef23 100644 --- a/doc/guides/nics/thunderx.rst +++ b/doc/guides/nics/thunderx.rst @@ -1,32 +1,5 @@ -.. BSD LICENSE - Copyright (C) Cavium, Inc. 2016. - All rights reserved. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions - are met: - - * Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in - the documentation and/or other materials provided with the - distribution. - * Neither the name of Cavium, Inc nor the names of its - contributors may be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +.. SPDX-License-Identifier: BSD-3-Clause + Copyright(c) 2016 Cavium, Inc ThunderX NICVF Poll Mode Driver =============================== @@ -81,25 +54,13 @@ Please note that enabling debugging options may affect system performance. Toggle compilation of the ``librte_pmd_thunderx_nicvf`` driver. -- ``CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_INIT`` (default ``n``) - - Toggle display of initialization related messages. - - ``CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_RX`` (default ``n``) - Toggle display of receive fast path run-time message + Toggle asserts of receive fast path. - ``CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_TX`` (default ``n``) - Toggle display of transmit fast path run-time message - -- ``CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_DRIVER`` (default ``n``) - - Toggle display of generic debugging messages - -- ``CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_MBOX`` (default ``n``) - - Toggle display of PF mailbox related run-time check messages + Toggle asserts of transmit fast path. Driver compilation and testing ------------------------------ @@ -216,7 +177,7 @@ This section provides instructions to configure SR-IOV with Linux OS. .. code-block:: console ./arm64-thunderx-linuxapp-gcc/app/testpmd -l 0-3 -n 4 -w 0002:01:00.2 \ - -- -i --disable-hw-vlan-filter --disable-crc-strip --no-flush-rx \ + -- -i --no-flush-rx \ --port-topology=loop ... diff --git a/doc/guides/nics/vdev_netvsc.rst b/doc/guides/nics/vdev_netvsc.rst new file mode 100644 index 00000000..55d130a3 --- /dev/null +++ b/doc/guides/nics/vdev_netvsc.rst @@ -0,0 +1,100 @@ +.. SPDX-License-Identifier: BSD-3-Clause + Copyright 2017 6WIND S.A. + Copyright 2017 Mellanox Technologies, Ltd. + +VDEV_NETVSC driver +================== + +The VDEV_NETVSC driver (librte_pmd_vdev_netvsc) provides support for NetVSC +interfaces and associated SR-IOV virtual function (VF) devices found in +Linux virtual machines running on Microsoft Hyper-V_ (including Azure) +platforms. + +.. _Hyper-V: https://docs.microsoft.com/en-us/windows-hardware/drivers/network/overview-of-hyper-v + +Implementation details +---------------------- + +Each instance of this driver effectively needs to drive two devices: the +NetVSC interface proper and its SR-IOV VF (referred to as "physical" from +this point on) counterpart sharing the same MAC address. + +Physical devices are part of the host system and cannot be maintained during +VM migration. From a VM standpoint they appear as hot-plug devices that come +and go without prior notice. + +When the physical device is present, egress and most of the ingress traffic +flows through it; only multicasts and other hypervisor control still flow +through NetVSC. Otherwise, NetVSC acts as a fallback for all traffic. + +To avoid unnecessary code duplication and ensure maximum performance, +handling of physical devices is left to their original PMDs; this virtual +device driver (also known as *vdev*) manages other PMDs as summarized by the +following block diagram:: + + .------------------. + | DPDK application | + `--------+---------' + | + .------+------. + | DPDK ethdev | + `------+------' Control + | | + .------------+------------. v .--------------------. + | failsafe PMD +---------+ vdev_netvsc driver | + `--+-------------------+--' `--------------------' + | | + | .........|......... + | : | : + .----+----. : .----+----. : + | tap PMD | : | any PMD | : + `----+----' : `----+----' : <-- Hot-pluggable + | : | : + .------+-------. : .-----+-----. : + | NetVSC-based | : | SR-IOV VF | : + | netdevice | : | device | : + `--------------' : `-----------' : + :.................: + + +This driver implementation may be temporary and should be improved or removed +either when hot-plug will be fully supported in EAL and bus drivers or when +a new NetVSC driver will be integrated. + +Build options +------------- + +- ``CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD`` (default ``y``) + + Toggle compilation of this driver. + +Run-time parameters +------------------- + +This driver is invoked automatically in Hyper-V VM systems unless the user +invoked it by command line using ``--vdev=net_vdev_netvsc`` EAL option. + +The following device parameters are supported: + +- ``iface`` [string] + + Provide a specific NetVSC interface (netdevice) name to attach this driver + to. Can be provided multiple times for additional instances. + +- ``mac`` [string] + + Same as ``iface`` except a suitable NetVSC interface is located using its + MAC address. + +- ``force`` [int] + + If nonzero, forces the use of specified interfaces even if not detected as + NetVSC or detected as routed NETVSC. + +- ``ignore`` [int] + + If nonzero, ignores the driver runnig (actually used to disable the + auto-detection in Hyper-V VM). + +Not specifying either ``iface`` or ``mac`` makes this driver attach itself to +all unrouted NetVSC interfaces found on the system. diff --git a/doc/guides/nics/virtio.rst b/doc/guides/nics/virtio.rst index af82f86e..ca09cd20 100644 --- a/doc/guides/nics/virtio.rst +++ b/doc/guides/nics/virtio.rst @@ -1,32 +1,5 @@ -.. BSD LICENSE - Copyright(c) 2010-2015 Intel Corporation. All rights reserved. - All rights reserved. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions - are met: - - * Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in - the documentation and/or other materials provided with the - distribution. - * Neither the name of Intel Corporation nor the names of its - contributors may be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +.. SPDX-License-Identifier: BSD-3-Clause + Copyright(c) 2010-2015 Intel Corporation. Poll Mode Driver for Emulated Virtio NIC ======================================== @@ -78,8 +51,9 @@ In this release, the virtio PMD driver provides the basic functionality of packe by default. Tx queue size is still hard-coded to be 256. * Features of mac/vlan filter are supported, negotiation with vhost/backend are needed to support them. - When backend can't support vlan filter, virtio app on guest should disable vlan filter to make sure - the virtio port is configured correctly. E.g. specify '--disable-hw-vlan' in testpmd command line. + When backend can't support vlan filter, virtio app on guest should not enable vlan filter in order + to make sure the virtio port is configured correctly. E.g. do not specify '--enable-hw-vlan' in testpmd + command line. * "RTE_PKTMBUF_HEADROOM" should be defined no less than "sizeof(struct virtio_net_hdr_mrg_rxbuf)", which is 12 bytes when mergeable or diff --git a/doc/guides/nics/vmxnet3.rst b/doc/guides/nics/vmxnet3.rst index bf845942..ae146f0d 100644 --- a/doc/guides/nics/vmxnet3.rst +++ b/doc/guides/nics/vmxnet3.rst @@ -1,32 +1,5 @@ -.. BSD LICENSE - Copyright(c) 2010-2014 Intel Corporation. All rights reserved. - All rights reserved. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions - are met: - - * Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in - the documentation and/or other materials provided with the - distribution. - * Neither the name of Intel Corporation nor the names of its - contributors may be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +.. SPDX-License-Identifier: BSD-3-Clause + Copyright(c) 2010-2014 Intel Corporation. Poll Mode Driver for Paravirtual VMXNET3 NIC ============================================ |