diff options
Diffstat (limited to 'doc/guides/rel_notes')
| -rw-r--r-- | doc/guides/rel_notes/deprecation.rst | 85 | ||||
| -rw-r--r-- | doc/guides/rel_notes/index.rst | 1 | ||||
| -rw-r--r-- | doc/guides/rel_notes/release_17_11.rst | 600 |
3 files changed, 606 insertions, 80 deletions
diff --git a/doc/guides/rel_notes/deprecation.rst b/doc/guides/rel_notes/deprecation.rst index 3362f335..7fcebf13 100644 --- a/doc/guides/rel_notes/deprecation.rst +++ b/doc/guides/rel_notes/deprecation.rst @@ -8,14 +8,6 @@ API and ABI deprecation notices are to be posted here. Deprecation Notices ------------------- -* eal: the following functions are deprecated starting from 17.05 and will - be removed in 17.11: - - - ``rte_set_log_level``, replaced by ``rte_log_set_global_level`` - - ``rte_get_log_level``, replaced by ``rte_log_get_global_level`` - - ``rte_set_log_type``, replaced by ``rte_log_set_level`` - - ``rte_get_log_type``, replaced by ``rte_log_get_level`` - * eal: several API and ABI changes are planned for ``rte_devargs`` in v17.11. The format of device command line parameters will change. The bus will need to be explicitly stated in the device declaration. The enum ``rte_devtype`` @@ -29,29 +21,12 @@ Deprecation Notices - ``rte_eal_devargs_type_count`` - ``rte_eal_parse_devargs_str``, replaced by ``rte_eal_devargs_parse`` -* eal: the support of Xen dom0 will be removed from EAL in 17.11; and with - that, drivers/net/xenvirt and examples/vhost_xen will also be removed. - -* eal: An ABI change is planned for 17.11 to make DPDK aware of IOVA address - translation scheme. - Reference to phys address in EAL data-structure or functions may change to - IOVA address or more appropriate name. - The change will be only for the name. - Functional aspects of the API or data-structure will remain same. - -* The mbuf flags PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT are deprecated and - are respectively replaced by PKT_RX_VLAN_STRIPPED and - PKT_RX_QINQ_STRIPPED, that are better described. The old flags and - their behavior will be kept until 17.08 and will be removed in 17.11. - -* mempool: The following will be modified in 17.11: +* pci: Several exposed functions are misnamed. + The following functions are deprecated starting from v17.11 and are replaced: - - ``rte_mempool_xmem_size`` and ``rte_mempool_xmem_usage`` need to know - the mempool flag status so adding new param rte_mempool in those API. - - Removing __rte_unused int flag param from ``rte_mempool_generic_put`` - and ``rte_mempool_generic_get`` API. - - ``rte_mempool`` flags data type will changed from int to - unsigned int. + - ``eal_parse_pci_BDF`` replaced by ``rte_pci_addr_parse`` + - ``eal_parse_pci_DomBDF`` replaced by ``rte_pci_addr_parse`` + - ``rte_eal_compare_pci_addr`` replaced by ``rte_pci_addr_cmp`` * ethdev: Tx offloads will no longer be enabled by default in 17.11. Instead, the ``rte_eth_txmode`` structure will be extended with @@ -68,55 +43,5 @@ Deprecation Notices Target release for removal of the legacy API will be defined once most PMDs have switched to rte_flow. -* ethdev: The device flag advertizing hotplug capability - ``RTE_ETH_DEV_DETACHABLE`` is not needed anymore and will be removed in - v17.11. - This capability is verified upon calling the relevant hotplug functions in EAL - by checking that the ``unplug`` ops is set in the bus. This verification is - done by the EAL and not by the ``ethdev`` layer anymore. Users relying on this - flag being present only have to remove their checks to follow the change. - -* ABI/API changes are planned for 17.11 in all structures which include port_id - definition such as "rte_eth_dev_data", "rte_port_ethdev_reader_params", - "rte_port_ethdev_writer_params", and so on. The definition of port_id will be - changed from 8 bits to 16 bits in order to support more than 256 ports in - DPDK. All APIs which have port_id parameter will be changed at the same time. - -* ethdev: An ABI change is planned for 17.11 for the structure rte_eth_dev_data. - The size of the unique name will increase RTE_ETH_NAME_MAX_LEN from 32 to - 64 characters to allow using a globally unique identifier (GUID) in this field. - -* ethdev: new parameters - ``rte_security_capabilities`` and - ``rte_security_ops`` will be added to ``rte_eth_dev_info`` and - ``rte_eth_dev`` respectively to support security operations like - ipsec inline. - -* cryptodev: new parameters - ``rte_security_capabilities`` and - ``rte_security_ops`` will be added to ``rte_cryptodev_info`` and - ``rte_cryptodev`` respectively to support security protocol offloaded - operations. - -* cryptodev: the following function is deprecated starting from 17.08 and will - be removed in 17.11: - - - ``rte_cryptodev_create_vdev`` - -* cryptodev: the following function will be static in 17.11 and included - by all crypto drivers, therefore, will not be public: - - - ``rte_cryptodev_vdev_pmd_init`` - -* cryptodev: the following function will have an extra parameter, passing a - statically allocated crypto driver structure, instead of calling malloc, - in 17.11: - - - ``rte_cryptodev_allocate_driver`` - * librte_meter: The API will change to accommodate configuration profiles. Most of the API functions will have an additional opaque parameter. - -* librte_table: The ``key_mask`` parameter will be added to all the hash tables - that currently do not have it, as well as to the hash compute function prototype. - The non-"do-sig" versions of the hash tables will be removed - (including the ``signature_offset`` parameter) - and the "do-sig" versions renamed accordingly. diff --git a/doc/guides/rel_notes/index.rst b/doc/guides/rel_notes/index.rst index b3c8090a..35659d8a 100644 --- a/doc/guides/rel_notes/index.rst +++ b/doc/guides/rel_notes/index.rst @@ -36,6 +36,7 @@ Release Notes :numbered: rel_description + release_17_11 release_17_08 release_17_05 release_17_02 diff --git a/doc/guides/rel_notes/release_17_11.rst b/doc/guides/rel_notes/release_17_11.rst new file mode 100644 index 00000000..e6e4407c --- /dev/null +++ b/doc/guides/rel_notes/release_17_11.rst @@ -0,0 +1,600 @@ +DPDK Release 17.11 +================== + +.. **Read this first.** + + The text in the sections below explains how to update the release notes. + + Use proper spelling, capitalization and punctuation in all sections. + + Variable and config names should be quoted as fixed width text: + ``LIKE_THIS``. + + Build the docs and view the output file to ensure the changes are correct:: + + make doc-guides-html + + xdg-open build/doc/html/guides/rel_notes/release_17_11.html + + +New Features +------------ + +.. This section should contain new features added in this release. Sample + format: + + * **Add a title in the past tense with a full stop.** + + Add a short 1-2 sentence description in the past tense. The description + should be enough to allow someone scanning the release notes to + understand the new feature. + + If the feature adds a lot of sub-features you can use a bullet list like + this: + + * Added feature foo to do something. + * Enhanced feature bar to do something else. + + Refer to the previous release notes for examples. + + This section is a comment. do not overwrite or remove it. + Also, make sure to start the actual text at the margin. + ========================================================= + +* **Extended port_id range from uint8_t to uint16_t.** + + Increased port_id range from 8 bits to 16 bits in order to support more than + 256 ports in dpdk. All ethdev APIs which have port_id as parameter are changed + in the meantime. + +* **Modified the return type of rte_eth_stats_reset.** + + Changed return type of ``rte_eth_stats_reset`` from ``void`` to ``int`` + so the caller may know whether a device supports the operation or not + and if the operation was carried out. + +* **Added a new driver for Marvell Armada 7k/8k devices.** + + Added the new mrvl net driver for Marvell Armada 7k/8k devices. See the + "Network Interface Controller Drivers" document for more details on this new + driver. + +* **Updated mlx5 driver.** + + Updated the mlx5 driver including the following changes: + + * Enabled PMD to run on top of upstream linux kernel and rdma-core libs. + By that removed the dependency on specific Mellanox OFED libraries. + * Improved PMD latency performance. + * Improved PMD memory footprint. + * Supported vectorized Rx/Tx burst for ARMv8. + * Supported secondary process. + * Supported flow counters. + * Supported Rx hardware timestamp offload. + * Supported device removal event. + +* **Added SoftNIC PMD.** + + Added new SoftNIC PMD. This virtual device offers applications a software + fallback support for traffic management. + +* **Added support for NXP DPAA Devices.** + + Added support for NXP's DPAA devices - LS104x series. This includes: + + * DPAA Bus driver + * DPAA Mempool driver for supporting offloaded packet memory pool + * DPAA PMD for DPAA devices + + See the "Network Interface Controller Drivers" document for more details of + this new driver. + +* **Updated support for Cavium OCTEONTX Device.** + + Updated support for Cavium's OCTEONTX device(CN83xx). This includes: + + * OCTEONTX Mempool driver for supporting offloaded packet memory pool + * OCTEONTX Ethdev PMD + * OCTEONTX Eventdev-Ethdev Rx adapter + + See the "Network Interface Controller Drivers" document for more details of + this new driver. + +* **nfp: Added PF support.** + + Previously Netronome's NFP PMD had just support for VFs. PF support is + just as a basic DPDK port and has no VF management yet. + + PF support comes with firmware upload support which allows the PMD to + independently work from kernel netdev NFP drivers. + + NFP 4000 devices are also now supported along with previous 6000 devices. + +* **Updated bnxt PMD.** + + Major enhancements include: + + * Support for Flow API + * Support for Tx and Rx descriptor status functions + +* **Add bus agnostic functions to cryptodev for PMD initialisation** + + Adds new PMD assist functions ``rte_cryptodev_pmd_parse_input_args()``, + ``rte_cryptodev_pmd_create()`` and ``rte_cryptodev_pmd_destroy()`` which + are bus independent for driver to manage creation and destruction of new + device instances. + +* **Updated QAT crypto PMD.** + + Performance enhancements: + + * Removed atomics from the internal queue pair structure. + * Coalesce writes to HEAD CSR on response processing. + * Coalesce writes to TAIL CSR on request processing. + + Additional support for: + + * AES CCM algorithm. + +* **Updated the AESNI MB PMD.** + + The AESNI MB PMD has been updated with additional support for: + + * DES CBC algorithm. + * DES DOCSIS BPI algorithm. + + This requires the IPSec Multi-buffer library 0.47. For more details, + check out the AESNI MB PMD documenation. + +* **Updated the OpenSSL PMD.** + + The OpenSSL PMD has been updated with additional support for: + + * DES CBC algorithm. + * AES CCM algorithm. + +* **Added NXP DPAA SEC crypto PMD.** + + A new "dpaa_sec" hardware based crypto PMD for NXP DPAA devices has been + added. See the "Crypto Device Drivers" document for more details on this + driver. + +* **Added MRVL crypto PMD.** + + A new crypto PMD has been added, which provides several ciphering and hashing + algorithms. All cryptography operations use the MUSDK library crypto API. + +* **Add new benchmarking mode to dpdk-test-crypto-perf application.** + + Added new "PMD cyclecount" benchmark mode to dpdk-test-crypto-perf application + that displays more detailed breakdown of CPU cycles used by hardware + acceleration. + +* **Added the Security Offload Library.** + + Added an experimental library - rte_security. It provide security APIs for + protocols like IPSec using inline ipsec offload to ethernet device or full + protocol offload with lookaside crypto device. + + See the "Security_Library" section of the DPDK Programmers Guide document, + for more information. + +* **Updated DPAA2_SEC crypto driver.** + + Updated dpaa2_sec crypto PMD to support rte_security lookaside protocol + offload for IPSec. + +* **Updated IXGBE ethernet driver.** + + Updated ixgbe ethernet PMD to support rte_security inline IPSec offload. + +* **Updated ipsec-secgw application** + + Updated ipsec-secgw sample application to support rte_security actions for + ipsec inline and full protocol offload using lookaside crypto offload. + +* **Added IOMMU support to libvhost-user** + + Implemented device IOTLB in Vhost-user backend, and enabled Virtio's IOMMU + feature. The feature is disabled by default, and can be enabled by setting + RTE_VHOST_USER_IOMMU_SUPPORT flag at vhost device registration time. + +* **Added the Event Ethernet Adapter Library.** + + Added the Event Ethernet Adapter library. It provices APIs for + eventdev applications to configure the ethdev to eventdev packet flow. + +* **Updated DPAA2 Event PMD.** + + Added support for eventdev ethernet adapter for DPAA2. + +* **Added Membership library (rte_member).** + + Added membership library. It provides an API for DPDK applications to insert a + new member, delete an existing member, or query the existence of a member in a + given set, or a group of sets. For the case of a group of sets the library + will return not only whether the element has been inserted before in one of + the sets but also which set it belongs to. + + The Membership Library is an extension and generalization of a traditional + filter (for example Bloom Filter) structure that has multiple usages in a wide + variety of workloads and applications. In general, the Membership Library is a + data structure that provides a “set-summary” and responds to set-membership + queries whether a certain member belongs to a set(s). + + See the :ref:`Membership Library <Member_Library>` documentation in + the Programmers Guide document, for more information. + +* **Added the Generic Segmentation Offload Library.** + + Added the Generic Segmentation Offload (GSO) library to enable + applications to split large packets (e.g. MTU is 64KB) into small + ones (e.g. MTU is 1500B). Supported packet types are: + + * TCP/IPv4 packets. + * VxLAN packets, which must have an outer IPv4 header, and contain + an inner TCP/IPv4 packet. + * GRE packets, which must contain an outer IPv4 header, and inner + TCP/IPv4 headers. + + The GSO library doesn't check if the input packets have correct + checksums, and doesn't update checksums for output packets. + Additionally, the GSO library doesn't process IP fragmented packets. + +* **Added the Flow Classification Library.** + + Added the Flow Classification library, it provides an API for DPDK + applications to classify an input packet by matching it against a set of flow + rules. It uses the librte_table API to manage the flow rules. + + +Resolved Issues +--------------- + +.. This section should contain bug fixes added to the relevant + sections. Sample format: + + * **code/section Fixed issue in the past tense with a full stop.** + + Add a short 1-2 sentence description of the resolved issue in the past + tense. + + The title should contain the code/lib section like a commit message. + + Add the entries in alphabetic order in the relevant sections below. + + This section is a comment. do not overwrite or remove it. + Also, make sure to start the actual text at the margin. + ========================================================= + + +EAL +~~~ + +* **Service core fails to call service callback due to atomic lock** + + In a specific configuration of multi-thread unsafe services and service + cores, a service core previously did not correctly release the atomic lock + on the service. This would result in the cores polling the service, but it + looked like another thread was executing the service callback. The logic for + atomic locking of the services has been fixed and refactored for readability. + +Drivers +~~~~~~~ + + +Libraries +~~~~~~~~~ + + +Examples +~~~~~~~~ + + +Other +~~~~~ + + +Known Issues +------------ + +.. This section should contain new known issues in this release. Sample format: + + * **Add title in present tense with full stop.** + + Add a short 1-2 sentence description of the known issue in the present + tense. Add information on any known workarounds. + + This section is a comment. do not overwrite or remove it. + Also, make sure to start the actual text at the margin. + ========================================================= + + +API Changes +----------- + +.. This section should contain API changes. Sample format: + + * Add a short 1-2 sentence description of the API change. Use fixed width + quotes for ``rte_function_names`` or ``rte_struct_names``. Use the past + tense. + + This section is a comment. do not overwrite or remove it. + Also, make sure to start the actual text at the margin. + ========================================================= + +* **Ethdev device name length increased** + + The size of internal device name is increased to 64 characters + to allow for storing longer bus specific name. + +* **Ethdev flag RTE_ETH_DEV_DETACHABLE was removed** + + This flag is not necessary anymore, with the new hotplug implementation. + It is now removed from the ether library. Its semantic is expressed at the bus + and PMD level. + +* **Service cores API updated for usability** + + The service cores API has been changed, removing pointers from the API + where possible, instead using integer IDs to identify each service. This + simplifed application code, aids debugging, and provides better + encapsulation. A summary of the main changes made is as follows: + + * Services identified by ID not by ``rte_service_spec`` pointer + * Reduced API surface by using ``set`` functions instead of enable/disable + * Reworked ``rte_service_register`` to provide the service ID to registrar + * Rework start and stop APIs into ``rte_service_runstate_set`` + * Added API to set runstate of service implementation to indicate readyness + +* **The following changes made in mempool library** + + * Moved ``flags`` datatype from int to unsigned int for ``rte_mempool``. + * Removed ``__rte_unused int flag`` param from ``rte_mempool_generic_put`` + and ``rte_mempool_generic_get`` API. + * Added ``flags`` param in ``rte_mempool_xmem_size`` and + ``rte_mempool_xmem_usage``. + +* ``rte_mem_phy2mch`` was used in Xen dom0 to obtain the physical address; + remove this API as Xen dom0 support was removed. + +* **Some data type, structure members and functions related to physical address + are deprecated and have new alias with IOVA wording.** + + * ``phys_addr_t`` can be often replaced by ``rte_iova_t`` of same size. + * ``RTE_BAD_PHYS_ADDR`` is often replaced by ``RTE_BAD_IOVA`` of same value. + * ``rte_memseg.phys_addr`` is aliased with ``rte_memseg.iova_addr``. + * ``rte_mem_virt2phy()`` can often be replaced by ``rte_mem_virt2iova``. + * ``rte_malloc_virt2phy`` is aliased with ``rte_malloc_virt2iova``. + * ``rte_memzone.phys_addr`` is aliased with ``rte_memzone.iova``. + * ``rte_mempool_objhdr.physaddr`` is aliased with ``rte_mempool_objhdr.iova``. + * ``rte_mempool_memhdr.phys_addr`` is aliased with ``rte_mempool_memhdr.iova``. + * ``rte_mempool_virt2phy()`` can be replaced by ``rte_mempool_virt2iova()``. + * ``rte_mempool_populate_phys*()`` are aliased with ``rte_mempool_populate_iova*()`` + * ``rte_mbuf.buf_physaddr`` is aliased with ``rte_mbuf.buf_iova``. + * ``rte_mbuf_data_dma_addr*()`` are aliased with ``rte_mbuf_data_iova*()``. + * ``rte_pktmbuf_mtophys*`` are aliased with ``rte_pktmbuf_iova*()``. + +* **PCI bus API moved outside of the EAL** + + The PCI bus previously implemented within the EAL has been moved. + A first part has been added as an RTE library providing PCI helpers to + parse device locations or other such utilities. + A second part consisting in the actual bus driver has been moved to its + proper subdirectory, without changing its functionalities. + + As such, several PCI-related functions are not proposed by the EAL anymore: + + * rte_pci_detach + * rte_pci_dump + * rte_pci_ioport_map + * rte_pci_ioport_read + * rte_pci_ioport_unmap + * rte_pci_ioport_write + * rte_pci_map_device + * rte_pci_probe + * rte_pci_probe_one + * rte_pci_read_config + * rte_pci_register + * rte_pci_scan + * rte_pci_unmap_device + * rte_pci_unregister + * rte_pci_write_config + + These functions are made available either as part of ``librte_pci`` or + ``librte_bus_pci``. + +* **Moved vdev bus APIs outside of the EAL** + + Moved the following APIs from ``librte_eal`` to ``librte_bus_vdev``: + * ``rte_vdev_init`` + * ``rte_vdev_register`` + * ``rte_vdev_uninit`` + * ``rte_vdev_unregister`` + +* **Add return value to stats_get dev op API** + + The ``stats_get`` dev op API return value has been changed to be int. + By this way PMDs can return an error value in case of failure at stats + getting process time. + +* **Modified the rte_cryptodev_allocate_driver function in the cryptodev library.** + + The function ``rte_cryptodev_allocate_driver()`` has been modified. + An extra parameter ``struct cryptodev_driver *crypto_drv`` has been added. + +* **Removed virtual device bus specific functions from librte_cryptodev.** + + The functions ``rte_cryptodev_vdev_parse_init_params()`` and + ``rte_cryptodev_vdev_pmd_init()`` have been removed from librte_cryptodev + and have been replaced by non bus specific functions + ``rte_cryptodev_pmd_parse_input_args()`` and ``rte_cryptodev_pmd_create()``. + +* ``rte_cryptodev_create_vdev`` was removed to avoid the dependency on vdev + in librte_cryptodev; instead, users can call rte_vdev_init() directly. + +* **Removed PCI device bus specific functions from librte_cryptodev.** + + The functions ``rte_cryptodev_pci_generic_probe()`` and + ``rte_cryptodev_pci_generic_remove()`` have been removed from librte_cryptodev + and have been replaced by non bus specific functions + ``rte_cryptodev_pmd_create()`` and ``rte_cryptodev_pmd_destroy()``. + +* **Removed deprecated functions to manage log level or type.** + + The functions ``rte_set_log_level()``, ``rte_get_log_level()``, + ``rte_set_log_type()`` and ``rte_get_log_type()`` have been removed. + They are respectively replaced by ``rte_log_set_global_level()``, + ``rte_log_get_global_level()``, ``rte_log_set_level()`` and + ``rte_log_get_level()``. + +* **Removed ``mbuf`` flags ``PKT_RX_VLAN_PKT`` and ``PKT_RX_QINQ_PKT``.** + + The ``mbuf`` flags ``PKT_RX_VLAN_PKT`` and ``PKT_RX_QINQ_PKT`` have + been removed since their behavior were not properly described. + +* **Added ``mbuf`` flags ``PKT_RX_VLAN`` and ``PKT_RX_QINQ``.** + + Two ``mbuf`` flags have been added to indicate that the VLAN + identifier has been saved in in the ``mbuf`` structure. For instance: + + - if VLAN is not stripped and TCI is saved: ``PKT_RX_VLAN`` + - if VLAN is stripped and TCI is saved: ``PKT_RX_VLAN | PKT_RX_VLAN_STRIPPED`` + +* **Modified the vlan_offload_set_t function prototype in the ethdev library.** + + Changed the function prototype of ``vlan_offload_set_t``. The return value + has been changed from ``void`` to ``int`` so the caller to knows whether + the backing device supports the operation or if the operation was + successfully performed. + + +ABI Changes +----------- + +.. This section should contain ABI changes. Sample format: + + * Add a short 1-2 sentence description of the ABI change that was announced + in the previous releases and made in this release. Use fixed width quotes + for ``rte_function_names`` or ``rte_struct_names``. Use the past tense. + + This section is a comment. do not overwrite or remove it. + Also, make sure to start the actual text at the margin. + ========================================================= + +* **Extended port_id range.** + + The size of the field ``port_id`` in the ``rte_eth_dev_data`` structure + changed, as described in the `New Features` section. + +* **New parameter added to rte_eth_dev.** + + New parameter ``security_ctx`` added to ``rte_eth_dev`` to support security + operations like IPSec inline. + +* **New parameter added to rte_cryptodev.** + + New parameter ``security_ctx`` added to ``rte_cryptodev`` to support security + operations like lookaside crypto. + + +Removed Items +------------- + +.. This section should contain removed items in this release. Sample format: + + * Add a short 1-2 sentence description of the removed item in the past + tense. + + This section is a comment. do not overwrite or remove it. + Also, make sure to start the actual text at the margin. + ========================================================= + +* Xen dom0 in EAL was removed, as well as xenvirt PMD and vhost_xen. + +* The crypto performance unit tests have been removed, + replaced by the dpdk-test-crypto-perf application. + + +Shared Library Versions +----------------------- + +.. Update any library version updated in this release and prepend with a ``+`` + sign, like this: + + librte_acl.so.2 + + librte_cfgfile.so.2 + librte_cmdline.so.2 + + This section is a comment. do not overwrite or remove it. + ========================================================= + + +The libraries prepended with a plus sign were incremented in this version. + +.. code-block:: diff + + librte_acl.so.2 + + librte_bitratestats.so.2 + + librte_bus_vdev.so.1 + librte_cfgfile.so.2 + librte_cmdline.so.2 + + librte_cryptodev.so.4 + librte_distributor.so.1 + + librte_eal.so.6 + + librte_ethdev.so.8 + + librte_eventdev.so.3 + + librte_flow_classify.so.1 + librte_gro.so.1 + + librte_gso.so.1 + librte_hash.so.2 + librte_ip_frag.so.1 + librte_jobstats.so.1 + librte_kni.so.2 + librte_kvargs.so.1 + librte_latencystats.so.1 + librte_lpm.so.2 + librte_mbuf.so.3 + + librte_mempool.so.3 + librte_meter.so.1 + librte_metrics.so.1 + librte_net.so.1 + + librte_pci.so.1 + + librte_pdump.so.2 + librte_pipeline.so.3 + + librte_pmd_bnxt.so.2 + + librte_pmd_bond.so.2 + + librte_pmd_i40e.so.2 + + librte_pmd_ixgbe.so.2 + librte_pmd_ring.so.2 + + librte_pmd_softnic.so.1 + + librte_pmd_vhost.so.2 + librte_port.so.3 + librte_power.so.1 + librte_reorder.so.1 + librte_ring.so.1 + librte_sched.so.1 + + librte_security.so.1 + + librte_table.so.3 + librte_timer.so.1 + librte_vhost.so.3 + + +Tested Platforms +---------------- + +.. This section should contain a list of platforms that were tested with this + release. + + The format is: + + * <vendor> platform with <vendor> <type of devices> combinations + + * List of CPU + * List of OS + * List of devices + * Other relevant details... + + This section is a comment. do not overwrite or remove it. + Also, make sure to start the actual text at the margin. + ========================================================= |