diff options
Diffstat (limited to 'doc/guides/tools/pdump.rst')
| -rw-r--r-- | doc/guides/tools/pdump.rst | 145 |
1 files changed, 145 insertions, 0 deletions
diff --git a/doc/guides/tools/pdump.rst b/doc/guides/tools/pdump.rst new file mode 100644 index 00000000..57097e43 --- /dev/null +++ b/doc/guides/tools/pdump.rst @@ -0,0 +1,145 @@ +.. BSD LICENSE + Copyright(c) 2016 Intel Corporation. All rights reserved. + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + * Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + * Neither the name of Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +dpdk-pdump Application +====================== + +The ``dpdk-pdump`` tool is a Data Plane Development Kit (DPDK) tool that runs as +a DPDK secondary process and is capable of enabling packet capture on dpdk ports. + + .. Note:: + * The ``dpdk-pdump`` tool can only be used in conjunction with a primary + application which has the packet capture framework initialized already. + + * The ``dpdk-pdump`` tool depends on libpcap based PMD which is disabled + by default in the build configuration files, + owing to an external dependency on the libpcap development files + which must be installed on the board. + Once the libpcap development files are installed, the libpcap based PMD + can be enabled by setting CONFIG_RTE_LIBRTE_PMD_PCAP=y and recompiling the DPDK. + + +Running the Application +----------------------- + +The tool has a number of command line options: + +.. code-block:: console + + ./build/app/dpdk-pdump -- + --pdump '(port=<port id> | device_id=<pci id or vdev name>), + (queue=<queue_id>), + (rx-dev=<iface or pcap file> | + tx-dev=<iface or pcap file>), + [ring-size=<ring size>], + [mbuf-size=<mbuf data size>], + [total-num-mbufs=<number of mbufs>]' + [--server-socket-path=<server socket dir>] + [--client-socket-path=<client socket dir>] + +The ``--pdump`` command line option is mandatory and it takes various sub arguments which are described in +below section. + + .. Note:: + + * Parameters inside the parentheses represents mandatory parameters. + + * Parameters inside the square brackets represents optional parameters. + + * Multiple instances of ``--pdump`` can be passed to capture packets on different port and queue combinations. + +The ``--server-socket-path`` command line option is optional. This represents the server socket directory. +If no value is passed default values are used i.e. ``/var/run/.dpdk/`` for root users and ``~/.dpdk/`` +for non root users. + +The ``--client-socket-path`` command line option is optional. This represents the client socket directory. +If no value is passed default values are used i.e. ``/var/run/.dpdk/`` for root users and ``~/.dpdk/`` +for non root users. + + +The ``--pdump`` parameters +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +``port``: +Port id of the eth device on which packets should be captured. + +``device_id``: +PCI address (or) name of the eth device on which packets should be captured. + + .. Note:: + + * As of now the ``dpdk-pdump`` tool cannot capture the packets of virtual devices + in the primary process due to a bug in the ethdev library. Due to this bug, in a multi process context, + when the primary and secondary have different ports set, then the secondary process + (here the ``dpdk-pdump`` tool) overwrites the ``rte_eth_devices[]`` entries of the primary process. + +``queue``: +Queue id of the eth device on which packets should be captured. The user can pass a queue value of ``*`` to enable +packet capture on all queues of the eth device. + +``rx-dev``: +Can be either a pcap file name or any Linux iface. + +``tx-dev``: +Can be either a pcap file name or any Linux iface. + + .. Note:: + + * To receive ingress packets only, ``rx-dev`` should be passed. + + * To receive egress packets only, ``tx-dev`` should be passed. + + * To receive ingress and egress packets separately ``rx-dev`` and ``tx-dev`` + should both be passed with the different file names or the Linux iface names. + + * To receive ingress and egress packets together, ``rx-dev`` and ``tx-dev`` + should both be passed with the same file name or the same Linux iface name. + +``ring-size``: +Size of the ring. This value is used internally for ring creation. The ring will be used to enqueue the packets from +the primary application to the secondary. This is an optional parameter with default size 16384. + +``mbuf-size``: +Size of the mbuf data. This is used internally for mempool creation. Ideally this value must be same as +the primary application's mempool's mbuf data size which is used for packet RX. This is an optional parameter with +default size 2176. + +``total-num-mbufs``: +Total number mbufs in mempool. This is used internally for mempool creation. This is an optional parameter with default +value 65535. + + +Example +------- + +.. code-block:: console + + $ sudo ./build/app/dpdk-pdump -- --pdump 'port=0,queue=*,rx-dev=/tmp/rx.pcap' |