summaryrefslogtreecommitdiffstats
path: root/doc
diff options
context:
space:
mode:
Diffstat (limited to 'doc')
-rw-r--r--doc/guides/contributing/documentation.rst4
-rw-r--r--doc/guides/contributing/patches.rst8
-rw-r--r--doc/guides/cryptodevs/qat.rst3
-rw-r--r--doc/guides/freebsd_gsg/install_from_ports.rst2
-rw-r--r--doc/guides/howto/flow_bifurcation.rst2
-rw-r--r--doc/guides/linux_gsg/nic_perf_intel_platform.rst2
-rw-r--r--doc/guides/linux_gsg/sys_reqs.rst6
-rw-r--r--doc/guides/nics/ena.rst15
-rw-r--r--doc/guides/nics/enic.rst46
-rw-r--r--doc/guides/nics/features/ena.ini1
-rw-r--r--doc/guides/rel_notes/release_16_11.rst117
-rw-r--r--doc/guides/sample_app_ug/ip_reassembly.rst4
-rw-r--r--doc/guides/sample_app_ug/ipv4_multicast.rst1
-rw-r--r--doc/guides/sample_app_ug/vhost.rst2
-rw-r--r--doc/guides/testpmd_app_ug/run_app.rst2
-rw-r--r--doc/guides/testpmd_app_ug/testpmd_funcs.rst2
16 files changed, 193 insertions, 24 deletions
diff --git a/doc/guides/contributing/documentation.rst b/doc/guides/contributing/documentation.rst
index 2cfb1a29..2545abc7 100644
--- a/doc/guides/contributing/documentation.rst
+++ b/doc/guides/contributing/documentation.rst
@@ -81,7 +81,7 @@ added to by the developer.
* **API documentation**
The API documentation explains how to use the public DPDK functions.
- The `API index page <http://dpdk.org/doc/api/>`_ shows the generated API documentation with related groups of functions.
+ The `API index page <http://doc.dpdk.org/api/>`_ shows the generated API documentation with related groups of functions.
The API documentation should be updated via Doxygen comments when new functions are added.
@@ -669,7 +669,7 @@ The following are some guidelines for use of Doxygen in the DPDK API documentati
*/
In the API documentation the functions will be rendered as links, see the
- `online section of the rte_ethdev.h docs <http://dpdk.org/doc/api/rte__ethdev_8h.html>`_ that contains the above text.
+ `online section of the rte_ethdev.h docs <http://doc.dpdk.org/api/rte__ethdev_8h.html>`_ that contains the above text.
* The ``@see`` keyword can be used to create a *see also* link to another file or library.
This directive should be placed on one line at the bottom of the documentation section.
diff --git a/doc/guides/contributing/patches.rst b/doc/guides/contributing/patches.rst
index 729aea71..db851b51 100644
--- a/doc/guides/contributing/patches.rst
+++ b/doc/guides/contributing/patches.rst
@@ -22,9 +22,9 @@ The DPDK development process has the following features:
* Patches are reviewed publicly on the mailing list.
* Successfully reviewed patches are merged to the master branch of the repository.
-The mailing list for DPDK development is `dev@dpdk.org <http://dpdk.org/ml/archives/dev/>`_.
-Contributors will need to `register for the mailing list <http://dpdk.org/ml/listinfo/dev>`_ in order to submit patches.
-It is also worth registering for the DPDK `Patchwork <http://dpdk.org/dev/patchwork/project/dpdk/list/>`_
+The mailing list for DPDK development is `dev@dpdk.org <http://mails.dpdk.org/archives/dev/>`_.
+Contributors will need to `register for the mailing list <http://mails.dpdk.org/listinfo/dev>`_ in order to submit patches.
+It is also worth registering for the DPDK `Patchwork <http://patches.dpdk.org/project/dpdk/list/>`_
The development process requires some familiarity with the ``git`` version control system.
Refer to the `Pro Git Book <http://www.git-scm.com/book/>`_ for further information.
@@ -347,7 +347,7 @@ If the patch is in relation to a previous email thread you can add it to the sam
git send-email --to dev@dpdk.org --in-reply-to <1234-foo@bar.com> 000*.patch
The Message ID can be found in the raw text of emails or at the top of each Patchwork patch,
-`for example <http://dpdk.org/dev/patchwork/patch/7646/>`_.
+`for example <http://patches.dpdk.org/patch/7646/>`_.
Shallow threading (``--thread --no-chain-reply-to``) is preferred for a patch series.
Once submitted your patches will appear on the mailing list and in Patchwork.
diff --git a/doc/guides/cryptodevs/qat.rst b/doc/guides/cryptodevs/qat.rst
index 2173819e..c46a62ea 100644
--- a/doc/guides/cryptodevs/qat.rst
+++ b/doc/guides/cryptodevs/qat.rst
@@ -89,7 +89,7 @@ To use the DPDK QAT PMD an SRIOV-enabled QAT kernel driver is required. The
VF devices exposed by this driver will be used by QAT PMD.
To enable QAT in DPDK, follow the instructions mentioned in
-http://dpdk.org/doc/guides/linux_gsg/build_dpdk.html
+http://doc.dpdk.org/guides/linux_gsg/build_dpdk.html
Quick instructions as follows:
@@ -107,7 +107,6 @@ For **Intel QuickAssist Technology C62x** and **Intel QuickAssist Technology C3x
device, kernel 4.5 or greater is needed.
See instructions for `Installation using kernel.org driver`_ below.
-
Installation using 01.org QAT driver
------------------------------------
diff --git a/doc/guides/freebsd_gsg/install_from_ports.rst b/doc/guides/freebsd_gsg/install_from_ports.rst
index 81770291..44bbdfef 100644
--- a/doc/guides/freebsd_gsg/install_from_ports.rst
+++ b/doc/guides/freebsd_gsg/install_from_ports.rst
@@ -89,7 +89,7 @@ environmental variables should be set as below:
.. note::
To install a copy of the DPDK compiled using gcc, please download the
- official DPDK package from http://dpdk.org/ and install manually using
+ official DPDK package from http://core.dpdk.org/download/ and install manually using
the instructions given in the next chapter, :ref:`building_from_source`
An example application can therefore be copied to a user's home directory and
diff --git a/doc/guides/howto/flow_bifurcation.rst b/doc/guides/howto/flow_bifurcation.rst
index 0d7226ae..cf5d6942 100644
--- a/doc/guides/howto/flow_bifurcation.rst
+++ b/doc/guides/howto/flow_bifurcation.rst
@@ -296,4 +296,4 @@ The typical procedure to achieve this is as follows:
'not involved', while ``00`` or no mask means 'involved'.
* For more details of the configuration, refer to the
- `cloud filter test plan <http://dpdk.org/browse/tools/dts/tree/test_plans/cloud_filter_test_plan.rst>`_
+ `cloud filter test plan <http://git.dpdk.org/tools/dts/tree/test_plans/cloud_filter_test_plan.rst>`_
diff --git a/doc/guides/linux_gsg/nic_perf_intel_platform.rst b/doc/guides/linux_gsg/nic_perf_intel_platform.rst
index d4a83624..e6cf1b94 100644
--- a/doc/guides/linux_gsg/nic_perf_intel_platform.rst
+++ b/doc/guides/linux_gsg/nic_perf_intel_platform.rst
@@ -64,7 +64,7 @@ This aligns with the previous output which showed that each channel has one memo
Network Interface Card Requirements
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-Use a `DPDK supported <http://dpdk.org/doc/nics>`_ high end NIC such as the Intel XL710 40GbE.
+Use a `DPDK supported <http://core.dpdk.org/supported/>`_ high end NIC such as the Intel XL710 40GbE.
Make sure each NIC has been flashed the latest version of NVM/firmware.
diff --git a/doc/guides/linux_gsg/sys_reqs.rst b/doc/guides/linux_gsg/sys_reqs.rst
index 3d743421..4845ca45 100644
--- a/doc/guides/linux_gsg/sys_reqs.rst
+++ b/doc/guides/linux_gsg/sys_reqs.rst
@@ -86,6 +86,12 @@ Compilation of the DPDK
.. note::
+* Library for handling NUMA (Non Uniform Memory Access).
+
+ * numactl-devel in Red Hat/Fedora;
+
+ * libnuma-dev in Debian/Ubuntu;
+
Python, version 2.6 or 2.7, to use various helper scripts included in the DPDK package.
diff --git a/doc/guides/nics/ena.rst b/doc/guides/nics/ena.rst
index 073b35ae..9062d7bf 100644
--- a/doc/guides/nics/ena.rst
+++ b/doc/guides/nics/ena.rst
@@ -187,11 +187,20 @@ Prerequisites
-------------
#. Prepare the system as recommended by DPDK suite. This includes environment
- variables, hugepages configuration, tool-chains and configuration
+ variables, hugepages configuration, tool-chains and configuration.
-#. Insert igb_uio kernel module using the command 'modprobe igb_uio'
+#. ENA PMD can operate with ``vfio-pci`` or ``igb_uio`` driver.
-#. Bind the intended ENA device to igb_uio module
+#. Insert ``vfio-pci`` or ``igb_uio`` kernel module using the command
+ ``modprobe vfio-pci`` or ``modprobe igb_uio`` respectively.
+
+#. For ``vfio-pci`` users only:
+ Please make sure that ``IOMMU`` is enabled in your system,
+ or use ``vfio`` driver in ``noiommu`` mode::
+
+ echo 1 > /sys/module/vfio/parameters/enable_unsafe_noiommu_mode
+
+#. Bind the intended ENA device to ``vfio-pci`` or ``igb_uio`` module.
At this point the system should be ready to run DPDK applications. Once the
diff --git a/doc/guides/nics/enic.rst b/doc/guides/nics/enic.rst
index c535b589..7738829e 100644
--- a/doc/guides/nics/enic.rst
+++ b/doc/guides/nics/enic.rst
@@ -39,7 +39,7 @@ How to obtain ENIC PMD integrated DPDK
--------------------------------------
ENIC PMD support is integrated into the DPDK suite. dpdk-<version>.tar.gz
-should be downloaded from http://dpdk.org
+should be downloaded from http://core.dpdk.org/download/
Configuration information
@@ -140,6 +140,35 @@ Masking of these feilds for partial match is also supported.
Without advanced filter support, the flow director is limited to IPv4
perfect filtering of the 5-tuple with no masking of fields supported.
+Ingress VLAN Rewrite
+--------------------
+
+VIC adapters can tag, untag, or modify the VLAN headers of ingress
+packets. The ingress VLAN rewrite mode controls this behavior. By
+default, it is set to pass-through, where the NIC does not modify the
+VLAN header in any way so that the application can see the original
+header. This mode is sufficient for many applications, but may not be
+suitable for others. Such applications may change the mode by setting
+``devargs`` parameter ``ig-vlan-rewrite`` to one of the following.
+
+- ``pass``: Pass-through mode. The NIC does not modify the VLAN
+ header. This is the default mode.
+
+- ``priority``: Priority-tag default VLAN mode. If the ingress packet
+ is tagged with the default VLAN, the NIC replaces its VLAN header
+ with the priority tag (VLAN ID 0).
+
+- ``trunk``: Default trunk mode. The NIC tags untagged ingress packets
+ with the default VLAN. Tagged ingress packets are not modified. To
+ the application, every packet appears as tagged.
+
+- ``untag``: Untag default VLAN mode. If the ingress packet is tagged
+ with the default VLAN, the NIC removes or untags its VLAN header so
+ that the application sees an untagged packet. As a result, the
+ default VLAN becomes `untagged`. This mode can be useful for
+ applications such as OVS-DPDK performance benchmarks that utilize
+ only the default VLAN and want to see only untagged packets.
+
Limitations
-----------
@@ -153,9 +182,10 @@ Limitations
In test setups where an Ethernet port of a Cisco adapter in TRUNK mode is
connected point-to-point to another adapter port or connected though a router
instead of a switch, all ingress packets will be VLAN tagged. Programs such
- as l3fwd which do not account for VLAN tags in packets will misbehave. The
- solution is to enable VLAN stripping on ingress. The follow code fragment is
- example of how to accomplish this:
+ as l3fwd may not account for VLAN tags in packets and may misbehave. One
+ solution is to enable VLAN stripping on ingress so the VLAN tag is removed
+ from the packet and put into the mbuf->vlan_tci field. Here is an example
+ of how to accomplish this:
.. code-block:: console
@@ -163,6 +193,14 @@ Limitations
vlan_offload |= ETH_VLAN_STRIP_OFFLOAD;
rte_eth_dev_set_vlan_offload(port, vlan_offload);
+Another alternative is modify the adapter's ingress VLAN rewrite mode so that
+packets with the default VLAN tag are stripped by the adapter and presented to
+DPDK as untagged packets. In this case mbuf->vlan_tci and the PKT_RX_VLAN and
+PKT_RX_VLAN_STRIPPED mbuf flags would not be set. This mode is enabled with the
+``devargs`` parameter ``ig-vlan-rewrite=untag``. For example::
+
+ -w 12:00.0,ig-vlan-rewrite=untag
+
- Limited flow director support on 1200 series and 1300 series Cisco VIC
adapters with old firmware. Please see :ref:`enic-flow-director`.
diff --git a/doc/guides/nics/features/ena.ini b/doc/guides/nics/features/ena.ini
index 74969fd0..d607fcc3 100644
--- a/doc/guides/nics/features/ena.ini
+++ b/doc/guides/nics/features/ena.ini
@@ -22,5 +22,6 @@ Inner L4 checksum = Y
Basic stats = Y
Extended stats = Y
Linux UIO = Y
+Linux VFIO = Y
x86-32 = Y
x86-64 = Y
diff --git a/doc/guides/rel_notes/release_16_11.rst b/doc/guides/rel_notes/release_16_11.rst
index 012cf73a..5d54b23a 100644
--- a/doc/guides/rel_notes/release_16_11.rst
+++ b/doc/guides/rel_notes/release_16_11.rst
@@ -1363,3 +1363,120 @@ Fixes in 16.11 LTS Release
* test/hash: fix potential memory leak
* test/virtual_pmd: add MAC address setting fake op
* vhost: fix missing increment of log cache count
+
+16.11.9
+~~~~~~~
+
+* acl: forbid rule with priority zero
+* app/testpmd: fix csum parse-tunnel command invocation
+* app/testpmd: fix displaying RSS hash functions
+* app/testpmd: fix duplicate exit
+* app/testpmd: fix L4 length for UDP checksum
+* app/testpmd: optimize mbuf pool allocation
+* build: enable ARM NEON flag when __aarch64__ defined
+* bus/pci: fix allocation of device path
+* config: enable more than 128 cores for arm64
+* config: make AVX and AVX512 configurable
+* doc: add VFIO in ENA guide
+* doc: fix formatting in IP reassembly app guide
+* doc: fix NUMA library name in Linux guide
+* doc: fix typo in testpmd guide
+* doc: fix wrong usage of bind command
+* eal: fix build
+* eal: fix build with gcc 9.0
+* eal: fix build with -O1
+* eal: introduce rte version of fls
+* eal/linux: fix memory leak of logid
+* eal/linux: handle UIO read failure in interrupt handler
+* eal: use correct data type for bitmap slab operations
+* ethdev: fix doxygen comment to be with structure
+* ethdev: fix invalid configuration after failure
+* ethdev: fix queue start and stop
+* examples/ipv4_multicast: fix leak of cloned packets
+* examples/vhost: remove unnecessary constant
+* fix dpdk.org URLs
+* fix global variable issues
+* hash: fix key store element alignment
+* hash: remove unnecessary pause
+* igb_uio: fix unexpected removal for hot-unplug
+* igb_uio: issue FLR during open and release of device file
+* igb_uio: remove device reset in open
+* igb_uio: remove device reset in release
+* ip_frag: check fragment length of incoming packet
+* ip_frag: fix overflow in key comparison
+* ip_frag: use key length for key comparison
+* kni: fix build on CentOS 7.4
+* kni: fix build on Linux < 3.14
+* kni: fix build on Linux 4.19
+* kni: fix build on Suse 12 SP3
+* kni: fix kernel FIFO synchronization
+* kni: fix possible uninitialized variable
+* kni: fix SLE version detection
+* kvargs: fix processing a null list
+* mk: disable gcc AVX512F support
+* net/bnx2x: fix call to link handling periodic function
+* net/bnx2x: fix logging to include device name
+* net/bnx2x: fix to add PHY lock
+* net/bnx2x: fix to disable further interrupts
+* net/bnx2x: fix VF link state update
+* net/bnxt: fix uninitialized pointer access in Tx
+* net/bnxt: reduce polling interval for valid bit
+* net/bnxt: remove excess log messages
+* net/bnxt: set a VNIC as default only once
+* net/bnxt: set MAC filtering as outer for non tunnel frames
+* net/bonding: do not ignore RSS key on device config
+* net/bonding: fix crash when stopping mode 4 port
+* net/bonding: fix Rx slave fairness
+* net/bonding: reduce slave starvation on Rx poll
+* net/bonding: stop and deactivate slaves on stop
+* net/bonding: support matching QinQ ethertype
+* net/bonding: use evenly distributed default RSS RETA
+* net/e1000/base: fix uninitialized variable
+* net/e1000: do not error out if Rx drop enable is set
+* net/ena: fix passing RSS hash to mbuf
+* net/enic: add dependency on librte_kvargs
+* net/enic: add devarg to specify ingress VLAN rewrite mode
+* net/enic: do not use non-standard integer types
+* net/enic: set Rx VLAN offload flag for non-stripped packets
+* net: fix build with pedantic
+* net/i40e/base: correct global reset timeout calculation
+* net/i40e/base: fix partition id calculation for X722
+* net/i40e/base: gracefully clean the resources
+* net/i40e/base: properly clean resources
+* net/i40e: enable loopback function for X722 MAC
+* net/i40e: fix send admin queue command before init
+* net/i40e: fix X710 Rx after reading some registers
+* net/i40e: keep promiscuous on if allmulticast is enabled
+* net/i40e: update Tx offload mask
+* net/igb: update Tx offload mask
+* net/ixgbe: fix maximum wait time in comment
+* net/ixgbe: fix TDH register write
+* net/ixgbe: update Tx offload mask
+* net/ixgbevf: fix link state
+* net/ixgbe: wait longer for link after fiber MAC setup
+* net/mlx5: fix build on PPC64
+* net/nfp: fix live MAC changes not supported
+* net/nfp: fix mbuf flags with checksum good
+* net/nfp: fix RSS
+* net/thunderx: fix Tx desc corruption in scatter-gather mode
+* net/vhost: fix parameters string
+* net/virtio: add missing supported features
+* net/virtio: register/unregister intr handler on start/stop
+* net/virtio-user: do not reset owner when driver resets
+* net/virtio-user: fix typo in error message
+* pci: fix parsing of address without function number
+* test/crypto: fix number of queue pairs
+* test/hash: fix bucket size in perf test
+* test/hash: fix build
+* test/kni: check module dependency
+* test/reorder: fix out of bound access
+* usertools: check for lspci dependency
+* version: 16.11.9-rc1
+* version: 16.11.9-rc2
+* vfio: fix build
+* vfio: fix build on old kernel
+* vhost: fix corner case for enqueue operation
+* vhost: fix payload size of reply
+* vhost: remove unneeded null pointer check
+* vhost-user: drop connection on message handling failures
+* vhost-user: fix false negative in handling user messages
diff --git a/doc/guides/sample_app_ug/ip_reassembly.rst b/doc/guides/sample_app_ug/ip_reassembly.rst
index 3c5cc708..4c75bd08 100644
--- a/doc/guides/sample_app_ug/ip_reassembly.rst
+++ b/doc/guides/sample_app_ug/ip_reassembly.rst
@@ -50,8 +50,8 @@ There are two key differences from the L2 Forwarding sample application:
* The second difference is that the application differentiates between IP and non-IP traffic by means of offload flags.
-The Longest Prefix Match (LPM for IPv4, LPM6 for IPv6) table is used to store/lookup an outgoing port number, associated with that IPv4 address. Any unmatched packets are forwarded to the originating port.Compiling the Application
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
+The Longest Prefix Match (LPM for IPv4, LPM6 for IPv6) table is used to store/lookup an outgoing port number,
+associated with that IPv4 address. Any unmatched packets are forwarded to the originating port.
To compile the application:
diff --git a/doc/guides/sample_app_ug/ipv4_multicast.rst b/doc/guides/sample_app_ug/ipv4_multicast.rst
index 72da8c42..6badc681 100644
--- a/doc/guides/sample_app_ug/ipv4_multicast.rst
+++ b/doc/guides/sample_app_ug/ipv4_multicast.rst
@@ -365,7 +365,6 @@ It is the mcast_out_pkt() function that performs the packet duplication (either
hdr->pkt.in_port = pkt->pkt.in_port;
hdr->pkt.vlan_macip = pkt->pkt.vlan_macip;
hdr->pkt.hash = pkt->pkt.hash;
- hdr->ol_flags = pkt->ol_flags;
rte_mbuf_sanity_check(hdr, RTE_MBUF_PKT, 1);
return hdr;
diff --git a/doc/guides/sample_app_ug/vhost.rst b/doc/guides/sample_app_ug/vhost.rst
index 1f6d0d96..c9a605fc 100644
--- a/doc/guides/sample_app_ug/vhost.rst
+++ b/doc/guides/sample_app_ug/vhost.rst
@@ -115,7 +115,7 @@ could be done by:
.. code-block:: console
modprobe uio_pci_generic
- $RTE_SDK/tools/dpdk-devbind.py -b=uio_pci_generic 0000:00:04.0
+ $RTE_SDK/tools/dpdk-devbind.py -b uio_pci_generic 0000:00:04.0
Then start testpmd for packet forwarding testing.
diff --git a/doc/guides/testpmd_app_ug/run_app.rst b/doc/guides/testpmd_app_ug/run_app.rst
index ac7d4582..65d54224 100644
--- a/doc/guides/testpmd_app_ug/run_app.rst
+++ b/doc/guides/testpmd_app_ug/run_app.rst
@@ -337,7 +337,7 @@ The commandline options are:
io (the default)
mac
- mac_swap
+ macswap
flowgen
rxonly
txonly
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index a906974f..45280c1c 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -201,7 +201,7 @@ show port rss-hash
Display the RSS hash functions and RSS hash key of a port::
- testpmd> show port (port_id) rss-hash ipv4|ipv4-frag|ipv4-tcp|ipv4-udp|ipv4-sctp|ipv4-other|ipv6|ipv6-frag|ipv6-tcp|ipv6-udp|ipv6-sctp|ipv6-other|l2-payload|ipv6-ex|ipv6-tcp-ex|ipv6-udp-ex [key]
+ testpmd> show port (port_id) rss-hash [key]
clear port
~~~~~~~~~~