diff options
Diffstat (limited to 'drivers/bus/fslmc/portal/dpaa2_hw_pvt.h')
| -rw-r--r-- | drivers/bus/fslmc/portal/dpaa2_hw_pvt.h | 94 |
1 files changed, 52 insertions, 42 deletions
diff --git a/drivers/bus/fslmc/portal/dpaa2_hw_pvt.h b/drivers/bus/fslmc/portal/dpaa2_hw_pvt.h index d421dbf0..82075936 100644 --- a/drivers/bus/fslmc/portal/dpaa2_hw_pvt.h +++ b/drivers/bus/fslmc/portal/dpaa2_hw_pvt.h @@ -142,7 +142,8 @@ struct dpaa2_dpci_dev { uint16_t token; rte_atomic16_t in_use; uint32_t dpci_id; /*HW ID for DPCI object */ - struct dpaa2_queue queue[DPAA2_DPCI_MAX_QUEUES]; + struct dpaa2_queue rx_queue[DPAA2_DPCI_MAX_QUEUES]; + struct dpaa2_queue tx_queue[DPAA2_DPCI_MAX_QUEUES]; }; /*! Global MCP list */ @@ -174,7 +175,7 @@ enum qbman_fd_format { }; /*Macros to define operations on FD*/ #define DPAA2_SET_FD_ADDR(fd, addr) do { \ - (fd)->simple.addr_lo = lower_32_bits((uint64_t)(addr)); \ + (fd)->simple.addr_lo = lower_32_bits((size_t)(addr)); \ (fd)->simple.addr_hi = upper_32_bits((uint64_t)(addr)); \ } while (0) #define DPAA2_SET_FD_LEN(fd, length) ((fd)->simple.len = length) @@ -188,50 +189,55 @@ enum qbman_fd_format { ((fd)->simple.frc = (0x80000000 | (len))) #define DPAA2_GET_FD_FRC_PARSE_SUM(fd) \ ((uint16_t)(((fd)->simple.frc & 0xffff0000) >> 16)) -#define DPAA2_SET_FD_FRC(fd, frc) ((fd)->simple.frc = frc) +#define DPAA2_SET_FD_FRC(fd, _frc) ((fd)->simple.frc = _frc) #define DPAA2_RESET_FD_CTRL(fd) ((fd)->simple.ctrl = 0) #define DPAA2_SET_FD_ASAL(fd, asal) ((fd)->simple.ctrl |= (asal << 16)) #define DPAA2_SET_FD_FLC(fd, addr) do { \ - (fd)->simple.flc_lo = lower_32_bits((uint64_t)(addr)); \ + (fd)->simple.flc_lo = lower_32_bits((size_t)(addr)); \ (fd)->simple.flc_hi = upper_32_bits((uint64_t)(addr)); \ } while (0) #define DPAA2_SET_FLE_INTERNAL_JD(fle, len) ((fle)->frc = (0x80000000 | (len))) #define DPAA2_GET_FLE_ADDR(fle) \ - (uint64_t)((((uint64_t)((fle)->addr_hi)) << 32) + (fle)->addr_lo) + (size_t)((((uint64_t)((fle)->addr_hi)) << 32) + (fle)->addr_lo) #define DPAA2_SET_FLE_ADDR(fle, addr) do { \ - (fle)->addr_lo = lower_32_bits((uint64_t)addr); \ - (fle)->addr_hi = upper_32_bits((uint64_t)addr); \ + (fle)->addr_lo = lower_32_bits((size_t)addr); \ + (fle)->addr_hi = upper_32_bits((uint64_t)addr); \ } while (0) #define DPAA2_GET_FLE_CTXT(fle) \ - (uint64_t)((((uint64_t)((fle)->reserved[1])) << 32) + \ - (fle)->reserved[0]) + ((((uint64_t)((fle)->reserved[1])) << 32) + (fle)->reserved[0]) #define DPAA2_FLE_SAVE_CTXT(fle, addr) do { \ - (fle)->reserved[0] = lower_32_bits((uint64_t)addr); \ - (fle)->reserved[1] = upper_32_bits((uint64_t)addr); \ + (fle)->reserved[0] = lower_32_bits((size_t)addr); \ + (fle)->reserved[1] = upper_32_bits((uint64_t)addr); \ } while (0) #define DPAA2_SET_FLE_OFFSET(fle, offset) \ ((fle)->fin_bpid_offset |= (uint32_t)(offset) << 16) -#define DPAA2_SET_FLE_BPID(fle, bpid) ((fle)->fin_bpid_offset |= (uint64_t)bpid) +#define DPAA2_SET_FLE_LEN(fle, len) ((fle)->length = len) +#define DPAA2_SET_FLE_BPID(fle, bpid) ((fle)->fin_bpid_offset |= (size_t)bpid) #define DPAA2_GET_FLE_BPID(fle) ((fle)->fin_bpid_offset & 0x000000ff) -#define DPAA2_SET_FLE_FIN(fle) ((fle)->fin_bpid_offset |= (uint64_t)1 << 31) +#define DPAA2_SET_FLE_FIN(fle) ((fle)->fin_bpid_offset |= 1 << 31) #define DPAA2_SET_FLE_IVP(fle) (((fle)->fin_bpid_offset |= 0x00004000)) +#define DPAA2_SET_FLE_BMT(fle) (((fle)->fin_bpid_offset |= 0x00008000)) #define DPAA2_SET_FD_COMPOUND_FMT(fd) \ ((fd)->simple.bpid_offset |= (uint32_t)1 << 28) #define DPAA2_GET_FD_ADDR(fd) \ -((uint64_t)((((uint64_t)((fd)->simple.addr_hi)) << 32) + (fd)->simple.addr_lo)) +(((((uint64_t)((fd)->simple.addr_hi)) << 32) + (fd)->simple.addr_lo)) #define DPAA2_GET_FD_LEN(fd) ((fd)->simple.len) #define DPAA2_GET_FD_BPID(fd) (((fd)->simple.bpid_offset & 0x00003FFF)) #define DPAA2_GET_FD_IVP(fd) (((fd)->simple.bpid_offset & 0x00004000) >> 14) #define DPAA2_GET_FD_OFFSET(fd) (((fd)->simple.bpid_offset & 0x0FFF0000) >> 16) +#define DPAA2_GET_FD_FRC(fd) ((fd)->simple.frc) +#define DPAA2_GET_FD_FLC(fd) \ + (((uint64_t)((fd)->simple.flc_hi) << 32) + (fd)->simple.flc_lo) +#define DPAA2_GET_FD_ERR(fd) ((fd)->simple.bpid_offset & 0x000000FF) #define DPAA2_GET_FLE_OFFSET(fle) (((fle)->fin_bpid_offset & 0x0FFF0000) >> 16) #define DPAA2_SET_FLE_SG_EXT(fle) ((fle)->fin_bpid_offset |= (uint64_t)1 << 29) #define DPAA2_IS_SET_FLE_SG_EXT(fle) \ (((fle)->fin_bpid_offset & ((uint64_t)1 << 29)) ? 1 : 0) #define DPAA2_INLINE_MBUF_FROM_BUF(buf, meta_data_size) \ - ((struct rte_mbuf *)((uint64_t)(buf) - (meta_data_size))) + ((struct rte_mbuf *)((size_t)(buf) - (meta_data_size))) #define DPAA2_ASAL_VAL (DPAA2_MBUF_HW_ANNOTATION / 64) @@ -255,47 +261,53 @@ enum qbman_fd_format { */ #define DPAA2_EQ_RESP_ALWAYS 1 +/* Various structures representing contiguous memory maps */ +struct dpaa2_memseg { + TAILQ_ENTRY(dpaa2_memseg) next; + char *vaddr; + rte_iova_t iova; + size_t len; +}; + +TAILQ_HEAD(dpaa2_memseg_list, dpaa2_memseg); +extern struct dpaa2_memseg_list rte_dpaa2_memsegs; + #ifdef RTE_LIBRTE_DPAA2_USE_PHYS_IOVA extern uint8_t dpaa2_virt_mode; static void *dpaa2_mem_ptov(phys_addr_t paddr) __attribute__((unused)); /* todo - this is costly, need to write a fast coversion routine */ static void *dpaa2_mem_ptov(phys_addr_t paddr) { - const struct rte_memseg *memseg; - int i; + struct dpaa2_memseg *ms; if (dpaa2_virt_mode) - return (void *)paddr; - - memseg = rte_eal_get_physmem_layout(); - - for (i = 0; i < RTE_MAX_MEMSEG && memseg[i].addr_64 != 0; i++) { - if (paddr >= memseg[i].iova && - (char *)paddr < (char *)memseg[i].iova + memseg[i].len) - return (void *)(memseg[i].addr_64 - + (paddr - memseg[i].iova)); + return (void *)(size_t)paddr; + + /* Check if the address is already part of the memseg list internally + * maintained by the dpaa2 driver. + */ + TAILQ_FOREACH(ms, &rte_dpaa2_memsegs, next) { + if (paddr >= ms->iova && paddr < + ms->iova + ms->len) + return RTE_PTR_ADD(ms->vaddr, (uintptr_t)(paddr - ms->iova)); } - return NULL; + + /* If not, Fallback to full memseg list searching */ + return rte_mem_iova2virt(paddr); } static phys_addr_t dpaa2_mem_vtop(uint64_t vaddr) __attribute__((unused)); static phys_addr_t dpaa2_mem_vtop(uint64_t vaddr) { const struct rte_memseg *memseg; - int i; if (dpaa2_virt_mode) return vaddr; - memseg = rte_eal_get_physmem_layout(); - - for (i = 0; i < RTE_MAX_MEMSEG && memseg[i].addr_64 != 0; i++) { - if (vaddr >= memseg[i].addr_64 && - vaddr < memseg[i].addr_64 + memseg[i].len) - return memseg[i].iova - + (vaddr - memseg[i].addr_64); - } - return (phys_addr_t)(NULL); + memseg = rte_mem_virt2memseg((void *)(uintptr_t)vaddr, NULL); + if (memseg) + return memseg->phys_addr + RTE_PTR_DIFF(vaddr, memseg->addr); + return (size_t)NULL; } /** @@ -306,28 +318,26 @@ static phys_addr_t dpaa2_mem_vtop(uint64_t vaddr) */ #define DPAA2_MBUF_VADDR_TO_IOVA(mbuf) ((mbuf)->buf_iova) -#define DPAA2_OP_VADDR_TO_IOVA(op) (op->phys_addr) /** * macro to convert Virtual address to IOVA */ -#define DPAA2_VADDR_TO_IOVA(_vaddr) dpaa2_mem_vtop((uint64_t)(_vaddr)) +#define DPAA2_VADDR_TO_IOVA(_vaddr) dpaa2_mem_vtop((size_t)(_vaddr)) /** * macro to convert IOVA to Virtual address */ -#define DPAA2_IOVA_TO_VADDR(_iova) dpaa2_mem_ptov((phys_addr_t)(_iova)) +#define DPAA2_IOVA_TO_VADDR(_iova) dpaa2_mem_ptov((size_t)(_iova)) /** * macro to convert modify the memory containing IOVA to Virtual address */ #define DPAA2_MODIFY_IOVA_TO_VADDR(_mem, _type) \ - {_mem = (_type)(dpaa2_mem_ptov((phys_addr_t)(_mem))); } + {_mem = (_type)(dpaa2_mem_ptov((size_t)(_mem))); } #else /* RTE_LIBRTE_DPAA2_USE_PHYS_IOVA */ #define DPAA2_MBUF_VADDR_TO_IOVA(mbuf) ((mbuf)->buf_addr) -#define DPAA2_OP_VADDR_TO_IOVA(op) (op) #define DPAA2_VADDR_TO_IOVA(_vaddr) (_vaddr) #define DPAA2_IOVA_TO_VADDR(_iova) (_iova) #define DPAA2_MODIFY_IOVA_TO_VADDR(_mem, _type) |